aboutsummaryrefslogtreecommitdiffstats
path: root/sound/oss/mpu401.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/oss/mpu401.c')
-rw-r--r--sound/oss/mpu401.c1826
1 files changed, 1826 insertions, 0 deletions
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
new file mode 100644
index 000000000000..b66f53fa8db0
--- /dev/null
+++ b/sound/oss/mpu401.c
@@ -0,0 +1,1826 @@
1/*
2 * sound/mpu401.c
3 *
4 * The low level driver for Roland MPU-401 compatible Midi cards.
5 */
6/*
7 * Copyright (C) by Hannu Savolainen 1993-1997
8 *
9 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
10 * Version 2 (June 1991). See the "COPYING" file distributed with this software
11 * for more info.
12 *
13 *
14 * Thomas Sailer ioctl code reworked (vmalloc/vfree removed)
15 * Alan Cox modularisation, use normal request_irq, use dev_id
16 * Bartlomiej Zolnierkiewicz removed some __init to allow using many drivers
17 * Chris Rankin Update the module-usage counter for the coprocessor
18 * Zwane Mwaikambo Changed attach/unload resource freeing
19 */
20
21#include <linux/module.h>
22#include <linux/init.h>
23#include <linux/interrupt.h>
24#include <linux/spinlock.h>
25#define USE_SEQ_MACROS
26#define USE_SIMPLE_MACROS
27
28#include "sound_config.h"
29
30#include "coproc.h"
31#include "mpu401.h"
32
33static int timer_mode = TMR_INTERNAL, timer_caps = TMR_INTERNAL;
34
35struct mpu_config
36{
37 int base; /*
38 * I/O base
39 */
40 int irq;
41 int opened; /*
42 * Open mode
43 */
44 int devno;
45 int synthno;
46 int uart_mode;
47 int initialized;
48 int mode;
49#define MODE_MIDI 1
50#define MODE_SYNTH 2
51 unsigned char version, revision;
52 unsigned int capabilities;
53#define MPU_CAP_INTLG 0x10000000
54#define MPU_CAP_SYNC 0x00000010
55#define MPU_CAP_FSK 0x00000020
56#define MPU_CAP_CLS 0x00000040
57#define MPU_CAP_SMPTE 0x00000080
58#define MPU_CAP_2PORT 0x00000001
59 int timer_flag;
60
61#define MBUF_MAX 10
62#define BUFTEST(dc) if (dc->m_ptr >= MBUF_MAX || dc->m_ptr < 0) \
63 {printk( "MPU: Invalid buffer pointer %d/%d, s=%d\n", dc->m_ptr, dc->m_left, dc->m_state);dc->m_ptr--;}
64 int m_busy;
65 unsigned char m_buf[MBUF_MAX];
66 int m_ptr;
67 int m_state;
68 int m_left;
69 unsigned char last_status;
70 void (*inputintr) (int dev, unsigned char data);
71 int shared_irq;
72 int *osp;
73 spinlock_t lock;
74 };
75
76#define DATAPORT(base) (base)
77#define COMDPORT(base) (base+1)
78#define STATPORT(base) (base+1)
79
80
81static void mpu401_close(int dev);
82
83static inline int mpu401_status(struct mpu_config *devc)
84{
85 return inb(STATPORT(devc->base));
86}
87
88#define input_avail(devc) (!(mpu401_status(devc)&INPUT_AVAIL))
89#define output_ready(devc) (!(mpu401_status(devc)&OUTPUT_READY))
90
91static inline void write_command(struct mpu_config *devc, unsigned char cmd)
92{
93 outb(cmd, COMDPORT(devc->base));
94}
95
96static inline int read_data(struct mpu_config *devc)
97{
98 return inb(DATAPORT(devc->base));
99}
100
101static inline void write_data(struct mpu_config *devc, unsigned char byte)
102{
103 outb(byte, DATAPORT(devc->base));
104}
105
106#define OUTPUT_READY 0x40
107#define INPUT_AVAIL 0x80
108#define MPU_ACK 0xFE
109#define MPU_RESET 0xFF
110#define UART_MODE_ON 0x3F
111
112static struct mpu_config dev_conf[MAX_MIDI_DEV];
113
114static int n_mpu_devs;
115
116static int reset_mpu401(struct mpu_config *devc);
117static void set_uart_mode(int dev, struct mpu_config *devc, int arg);
118
119static int mpu_timer_init(int midi_dev);
120static void mpu_timer_interrupt(void);
121static void timer_ext_event(struct mpu_config *devc, int event, int parm);
122
123static struct synth_info mpu_synth_info_proto = {
124 "MPU-401 MIDI interface",
125 0,
126 SYNTH_TYPE_MIDI,
127 MIDI_TYPE_MPU401,
128 0, 128,
129 0, 128,
130 SYNTH_CAP_INPUT
131};
132
133static struct synth_info mpu_synth_info[MAX_MIDI_DEV];
134
135/*
136 * States for the input scanner
137 */
138
139#define ST_INIT 0 /* Ready for timing byte or msg */
140#define ST_TIMED 1 /* Leading timing byte rcvd */
141#define ST_DATABYTE 2 /* Waiting for (nr_left) data bytes */
142
143#define ST_SYSMSG 100 /* System message (sysx etc). */
144#define ST_SYSEX 101 /* System exclusive msg */
145#define ST_MTC 102 /* Midi Time Code (MTC) qframe msg */
146#define ST_SONGSEL 103 /* Song select */
147#define ST_SONGPOS 104 /* Song position pointer */
148
149static unsigned char len_tab[] = /* # of data bytes following a status
150 */
151{
152 2, /* 8x */
153 2, /* 9x */
154 2, /* Ax */
155 2, /* Bx */
156 1, /* Cx */
157 1, /* Dx */
158 2, /* Ex */
159 0 /* Fx */
160};
161
162#define STORE(cmd) \
163{ \
164 int len; \
165 unsigned char obuf[8]; \
166 cmd; \
167 seq_input_event(obuf, len); \
168}
169
170#define _seqbuf obuf
171#define _seqbufptr 0
172#define _SEQ_ADVBUF(x) len=x
173
174static int mpu_input_scanner(struct mpu_config *devc, unsigned char midic)
175{
176
177 switch (devc->m_state)
178 {
179 case ST_INIT:
180 switch (midic)
181 {
182 case 0xf8:
183 /* Timer overflow */
184 break;
185
186 case 0xfc:
187 printk("<all end>");
188 break;
189
190 case 0xfd:
191 if (devc->timer_flag)
192 mpu_timer_interrupt();
193 break;
194
195 case 0xfe:
196 return MPU_ACK;
197
198 case 0xf0:
199 case 0xf1:
200 case 0xf2:
201 case 0xf3:
202 case 0xf4:
203 case 0xf5:
204 case 0xf6:
205 case 0xf7:
206 printk("<Trk data rq #%d>", midic & 0x0f);
207 break;
208
209 case 0xf9:
210 printk("<conductor rq>");
211 break;
212
213 case 0xff:
214 devc->m_state = ST_SYSMSG;
215 break;
216
217 default:
218 if (midic <= 0xef)
219 {
220 /* printk( "mpu time: %d ", midic); */
221 devc->m_state = ST_TIMED;
222 }
223 else
224 printk("<MPU: Unknown event %02x> ", midic);
225 }
226 break;
227
228 case ST_TIMED:
229 {
230 int msg = ((int) (midic & 0xf0) >> 4);
231
232 devc->m_state = ST_DATABYTE;
233
234 if (msg < 8) /* Data byte */
235 {
236 /* printk( "midi msg (running status) "); */
237 msg = ((int) (devc->last_status & 0xf0) >> 4);
238 msg -= 8;
239 devc->m_left = len_tab[msg] - 1;
240
241 devc->m_ptr = 2;
242 devc->m_buf[0] = devc->last_status;
243 devc->m_buf[1] = midic;
244
245 if (devc->m_left <= 0)
246 {
247 devc->m_state = ST_INIT;
248 do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
249 devc->m_ptr = 0;
250 }
251 }
252 else if (msg == 0xf) /* MPU MARK */
253 {
254 devc->m_state = ST_INIT;
255
256 switch (midic)
257 {
258 case 0xf8:
259 /* printk( "NOP "); */
260 break;
261
262 case 0xf9:
263 /* printk( "meas end "); */
264 break;
265
266 case 0xfc:
267 /* printk( "data end "); */
268 break;
269
270 default:
271 printk("Unknown MPU mark %02x\n", midic);
272 }
273 }
274 else
275 {
276 devc->last_status = midic;
277 /* printk( "midi msg "); */
278 msg -= 8;
279 devc->m_left = len_tab[msg];
280
281 devc->m_ptr = 1;
282 devc->m_buf[0] = midic;
283
284 if (devc->m_left <= 0)
285 {
286 devc->m_state = ST_INIT;
287 do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
288 devc->m_ptr = 0;
289 }
290 }
291 }
292 break;
293
294 case ST_SYSMSG:
295 switch (midic)
296 {
297 case 0xf0:
298 printk("<SYX>");
299 devc->m_state = ST_SYSEX;
300 break;
301
302 case 0xf1:
303 devc->m_state = ST_MTC;
304 break;
305
306 case 0xf2:
307 devc->m_state = ST_SONGPOS;
308 devc->m_ptr = 0;
309 break;
310
311 case 0xf3:
312 devc->m_state = ST_SONGSEL;
313 break;
314
315 case 0xf6:
316 /* printk( "tune_request\n"); */
317 devc->m_state = ST_INIT;
318
319 /*
320 * Real time messages
321 */
322 case 0xf8:
323 /* midi clock */
324 devc->m_state = ST_INIT;
325 timer_ext_event(devc, TMR_CLOCK, 0);
326 break;
327
328 case 0xfA:
329 devc->m_state = ST_INIT;
330 timer_ext_event(devc, TMR_START, 0);
331 break;
332
333 case 0xFB:
334 devc->m_state = ST_INIT;
335 timer_ext_event(devc, TMR_CONTINUE, 0);
336 break;
337
338 case 0xFC:
339 devc->m_state = ST_INIT;
340 timer_ext_event(devc, TMR_STOP, 0);
341 break;
342
343 case 0xFE:
344 /* active sensing */
345 devc->m_state = ST_INIT;
346 break;
347
348 case 0xff:
349 /* printk( "midi hard reset"); */
350 devc->m_state = ST_INIT;
351 break;
352
353 default:
354 printk("unknown MIDI sysmsg %0x\n", midic);
355 devc->m_state = ST_INIT;
356 }
357 break;
358
359 case ST_MTC:
360 devc->m_state = ST_INIT;
361 printk("MTC frame %x02\n", midic);
362 break;
363
364 case ST_SYSEX:
365 if (midic == 0xf7)
366 {
367 printk("<EOX>");
368 devc->m_state = ST_INIT;
369 }
370 else
371 printk("%02x ", midic);
372 break;
373
374 case ST_SONGPOS:
375 BUFTEST(devc);
376 devc->m_buf[devc->m_ptr++] = midic;
377 if (devc->m_ptr == 2)
378 {
379 devc->m_state = ST_INIT;
380 devc->m_ptr = 0;
381 timer_ext_event(devc, TMR_SPP,
382 ((devc->m_buf[1] & 0x7f) << 7) |
383 (devc->m_buf[0] & 0x7f));
384 }
385 break;
386
387 case ST_DATABYTE:
388 BUFTEST(devc);
389 devc->m_buf[devc->m_ptr++] = midic;
390 if ((--devc->m_left) <= 0)
391 {
392 devc->m_state = ST_INIT;
393 do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr);
394 devc->m_ptr = 0;
395 }
396 break;
397
398 default:
399 printk("Bad state %d ", devc->m_state);
400 devc->m_state = ST_INIT;
401 }
402 return 1;
403}
404
405static void mpu401_input_loop(struct mpu_config *devc)
406{
407 unsigned long flags;
408 int busy;
409 int n;
410
411 spin_lock_irqsave(&devc->lock,flags);
412 busy = devc->m_busy;
413 devc->m_busy = 1;
414 spin_unlock_irqrestore(&devc->lock,flags);
415
416 if (busy) /* Already inside the scanner */
417 return;
418
419 n = 50;
420
421 while (input_avail(devc) && n-- > 0)
422 {
423 unsigned char c = read_data(devc);
424
425 if (devc->mode == MODE_SYNTH)
426 {
427 mpu_input_scanner(devc, c);
428 }
429 else if (devc->opened & OPEN_READ && devc->inputintr != NULL)
430 devc->inputintr(devc->devno, c);
431 }
432 devc->m_busy = 0;
433}
434
435int intchk_mpu401(void *dev_id)
436{
437 struct mpu_config *devc;
438 int dev = (int) dev_id;
439
440 devc = &dev_conf[dev];
441 return input_avail(devc);
442}
443
444irqreturn_t mpuintr(int irq, void *dev_id, struct pt_regs *dummy)
445{
446 struct mpu_config *devc;
447 int dev = (int) dev_id;
448 int handled = 0;
449
450 devc = &dev_conf[dev];
451
452 if (input_avail(devc))
453 {
454 handled = 1;
455 if (devc->base != 0 && (devc->opened & OPEN_READ || devc->mode == MODE_SYNTH))
456 mpu401_input_loop(devc);
457 else
458 {
459 /* Dummy read (just to acknowledge the interrupt) */
460 read_data(devc);
461 }
462 }
463 return IRQ_RETVAL(handled);
464}
465
466static int mpu401_open(int dev, int mode,
467 void (*input) (int dev, unsigned char data),
468 void (*output) (int dev)
469)
470{
471 int err;
472 struct mpu_config *devc;
473 struct coproc_operations *coprocessor;
474
475 if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL)
476 return -ENXIO;
477
478 devc = &dev_conf[dev];
479
480 if (devc->opened)
481 return -EBUSY;
482 /*
483 * Verify that the device is really running.
484 * Some devices (such as Ensoniq SoundScape don't
485 * work before the on board processor (OBP) is initialized
486 * by downloading its microcode.
487 */
488
489 if (!devc->initialized)
490 {
491 if (mpu401_status(devc) == 0xff) /* Bus float */
492 {
493 printk(KERN_ERR "mpu401: Device not initialized properly\n");
494 return -EIO;
495 }
496 reset_mpu401(devc);
497 }
498
499 if ( (coprocessor = midi_devs[dev]->coproc) != NULL )
500 {
501 if (!try_module_get(coprocessor->owner)) {
502 mpu401_close(dev);
503 return -ENODEV;
504 }
505
506 if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0)
507 {
508 printk(KERN_WARNING "MPU-401: Can't access coprocessor device\n");
509 mpu401_close(dev);
510 return err;
511 }
512 }
513
514 set_uart_mode(dev, devc, 1);
515 devc->mode = MODE_MIDI;
516 devc->synthno = 0;
517
518 mpu401_input_loop(devc);
519
520 devc->inputintr = input;
521 devc->opened = mode;
522
523 return 0;
524}
525
526static void mpu401_close(int dev)
527{
528 struct mpu_config *devc;
529 struct coproc_operations *coprocessor;
530
531 devc = &dev_conf[dev];
532 if (devc->uart_mode)
533 reset_mpu401(devc); /*
534 * This disables the UART mode
535 */
536 devc->mode = 0;
537 devc->inputintr = NULL;
538
539 coprocessor = midi_devs[dev]->coproc;
540 if (coprocessor) {
541 coprocessor->close(coprocessor->devc, COPR_MIDI);
542 module_put(coprocessor->owner);
543 }
544 devc->opened = 0;
545}
546
547static int mpu401_out(int dev, unsigned char midi_byte)
548{
549 int timeout;
550 unsigned long flags;
551
552 struct mpu_config *devc;
553
554 devc = &dev_conf[dev];
555
556 /*
557 * Sometimes it takes about 30000 loops before the output becomes ready
558 * (After reset). Normally it takes just about 10 loops.
559 */
560
561 for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--);
562
563 spin_lock_irqsave(&devc->lock,flags);
564 if (!output_ready(devc))
565 {
566 printk(KERN_WARNING "mpu401: Send data timeout\n");
567 spin_unlock_irqrestore(&devc->lock,flags);
568 return 0;
569 }
570 write_data(devc, midi_byte);
571 spin_unlock_irqrestore(&devc->lock,flags);
572 return 1;
573}
574
575static int mpu401_command(int dev, mpu_command_rec * cmd)
576{
577 int i, timeout, ok;
578 int ret = 0;
579 unsigned long flags;
580 struct mpu_config *devc;
581
582 devc = &dev_conf[dev];
583
584 if (devc->uart_mode) /*
585 * Not possible in UART mode
586 */
587 {
588 printk(KERN_WARNING "mpu401: commands not possible in the UART mode\n");
589 return -EINVAL;
590 }
591 /*
592 * Test for input since pending input seems to block the output.
593 */
594 if (input_avail(devc))
595 mpu401_input_loop(devc);
596
597 /*
598 * Sometimes it takes about 50000 loops before the output becomes ready
599 * (After reset). Normally it takes just about 10 loops.
600 */
601
602 timeout = 50000;
603retry:
604 if (timeout-- <= 0)
605 {
606 printk(KERN_WARNING "mpu401: Command (0x%x) timeout\n", (int) cmd->cmd);
607 return -EIO;
608 }
609 spin_lock_irqsave(&devc->lock,flags);
610
611 if (!output_ready(devc))
612 {
613 spin_unlock_irqrestore(&devc->lock,flags);
614 goto retry;
615 }
616 write_command(devc, cmd->cmd);
617
618 ok = 0;
619 for (timeout = 50000; timeout > 0 && !ok; timeout--)
620 {
621 if (input_avail(devc))
622 {
623 if (devc->opened && devc->mode == MODE_SYNTH)
624 {
625 if (mpu_input_scanner(devc, read_data(devc)) == MPU_ACK)
626 ok = 1;
627 }
628 else
629 {
630 /* Device is not currently open. Use simpler method */
631 if (read_data(devc) == MPU_ACK)
632 ok = 1;
633 }
634 }
635 }
636 if (!ok)
637 {
638 spin_unlock_irqrestore(&devc->lock,flags);
639 return -EIO;
640 }
641 if (cmd->nr_args)
642 {
643 for (i = 0; i < cmd->nr_args; i++)
644 {
645 for (timeout = 3000; timeout > 0 && !output_ready(devc); timeout--);
646
647 if (!mpu401_out(dev, cmd->data[i]))
648 {
649 spin_unlock_irqrestore(&devc->lock,flags);
650 printk(KERN_WARNING "mpu401: Command (0x%x), parm send failed.\n", (int) cmd->cmd);
651 return -EIO;
652 }
653 }
654 }
655 ret = 0;
656 cmd->data[0] = 0;
657
658 if (cmd->nr_returns)
659 {
660 for (i = 0; i < cmd->nr_returns; i++)
661 {
662 ok = 0;
663 for (timeout = 5000; timeout > 0 && !ok; timeout--)
664 if (input_avail(devc))
665 {
666 cmd->data[i] = read_data(devc);
667 ok = 1;
668 }
669 if (!ok)
670 {
671 spin_unlock_irqrestore(&devc->lock,flags);
672 return -EIO;
673 }
674 }
675 }
676 spin_unlock_irqrestore(&devc->lock,flags);
677 return ret;
678}
679
680static int mpu_cmd(int dev, int cmd, int data)
681{
682 int ret;
683
684 static mpu_command_rec rec;
685
686 rec.cmd = cmd & 0xff;
687 rec.nr_args = ((cmd & 0xf0) == 0xE0);
688 rec.nr_returns = ((cmd & 0xf0) == 0xA0);
689 rec.data[0] = data & 0xff;
690
691 if ((ret = mpu401_command(dev, &rec)) < 0)
692 return ret;
693 return (unsigned char) rec.data[0];
694}
695
696static int mpu401_prefix_cmd(int dev, unsigned char status)
697{
698 struct mpu_config *devc = &dev_conf[dev];
699
700 if (devc->uart_mode)
701 return 1;
702
703 if (status < 0xf0)
704 {
705 if (mpu_cmd(dev, 0xD0, 0) < 0)
706 return 0;
707 return 1;
708 }
709 switch (status)
710 {
711 case 0xF0:
712 if (mpu_cmd(dev, 0xDF, 0) < 0)
713 return 0;
714 return 1;
715
716 default:
717 return 0;
718 }
719}
720
721static int mpu401_start_read(int dev)
722{
723 return 0;
724}
725
726static int mpu401_end_read(int dev)
727{
728 return 0;
729}
730
731static int mpu401_ioctl(int dev, unsigned cmd, void __user *arg)
732{
733 struct mpu_config *devc;
734 mpu_command_rec rec;
735 int val, ret;
736
737 devc = &dev_conf[dev];
738 switch (cmd)
739 {
740 case SNDCTL_MIDI_MPUMODE:
741 if (!(devc->capabilities & MPU_CAP_INTLG)) { /* No intelligent mode */
742 printk(KERN_WARNING "mpu401: Intelligent mode not supported by the HW\n");
743 return -EINVAL;
744 }
745 if (get_user(val, (int __user *)arg))
746 return -EFAULT;
747 set_uart_mode(dev, devc, !val);
748 return 0;
749
750 case SNDCTL_MIDI_MPUCMD:
751 if (copy_from_user(&rec, arg, sizeof(rec)))
752 return -EFAULT;
753 if ((ret = mpu401_command(dev, &rec)) < 0)
754 return ret;
755 if (copy_to_user(arg, &rec, sizeof(rec)))
756 return -EFAULT;
757 return 0;
758
759 default:
760 return -EINVAL;
761 }
762}
763
764static void mpu401_kick(int dev)
765{
766}
767
768static int mpu401_buffer_status(int dev)
769{
770 return 0; /*
771 * No data in buffers
772 */
773}
774
775static int mpu_synth_ioctl(int dev, unsigned int cmd, void __user *arg)
776{
777 int midi_dev;
778 struct mpu_config *devc;
779
780 midi_dev = synth_devs[dev]->midi_dev;
781
782 if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL)
783 return -ENXIO;
784
785 devc = &dev_conf[midi_dev];
786
787 switch (cmd)
788 {
789
790 case SNDCTL_SYNTH_INFO:
791 if (copy_to_user(arg, &mpu_synth_info[midi_dev],
792 sizeof(struct synth_info)))
793 return -EFAULT;
794 return 0;
795
796 case SNDCTL_SYNTH_MEMAVL:
797 return 0x7fffffff;
798
799 default:
800 return -EINVAL;
801 }
802}
803
804static int mpu_synth_open(int dev, int mode)
805{
806 int midi_dev, err;
807 struct mpu_config *devc;
808 struct coproc_operations *coprocessor;
809
810 midi_dev = synth_devs[dev]->midi_dev;
811
812 if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL)
813 return -ENXIO;
814
815 devc = &dev_conf[midi_dev];
816
817 /*
818 * Verify that the device is really running.
819 * Some devices (such as Ensoniq SoundScape don't
820 * work before the on board processor (OBP) is initialized
821 * by downloading its microcode.
822 */
823
824 if (!devc->initialized)
825 {
826 if (mpu401_status(devc) == 0xff) /* Bus float */
827 {
828 printk(KERN_ERR "mpu401: Device not initialized properly\n");
829 return -EIO;
830 }
831 reset_mpu401(devc);
832 }
833 if (devc->opened)
834 return -EBUSY;
835 devc->mode = MODE_SYNTH;
836 devc->synthno = dev;
837
838 devc->inputintr = NULL;
839
840 coprocessor = midi_devs[midi_dev]->coproc;
841 if (coprocessor) {
842 if (!try_module_get(coprocessor->owner))
843 return -ENODEV;
844
845 if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0)
846 {
847 printk(KERN_WARNING "mpu401: Can't access coprocessor device\n");
848 return err;
849 }
850 }
851 devc->opened = mode;
852 reset_mpu401(devc);
853
854 if (mode & OPEN_READ)
855 {
856 mpu_cmd(midi_dev, 0x8B, 0); /* Enable data in stop mode */
857 mpu_cmd(midi_dev, 0x34, 0); /* Return timing bytes in stop mode */
858 mpu_cmd(midi_dev, 0x87, 0); /* Enable pitch & controller */
859 }
860 return 0;
861}
862
863static void mpu_synth_close(int dev)
864{
865 int midi_dev;
866 struct mpu_config *devc;
867 struct coproc_operations *coprocessor;
868
869 midi_dev = synth_devs[dev]->midi_dev;
870
871 devc = &dev_conf[midi_dev];
872 mpu_cmd(midi_dev, 0x15, 0); /* Stop recording, playback and MIDI */
873 mpu_cmd(midi_dev, 0x8a, 0); /* Disable data in stopped mode */
874
875 devc->inputintr = NULL;
876
877 coprocessor = midi_devs[midi_dev]->coproc;
878 if (coprocessor) {
879 coprocessor->close(coprocessor->devc, COPR_MIDI);
880 module_put(coprocessor->owner);
881 }
882 devc->opened = 0;
883 devc->mode = 0;
884}
885
886#define MIDI_SYNTH_NAME "MPU-401 UART Midi"
887#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT
888#include "midi_synth.h"
889
890static struct synth_operations mpu401_synth_proto =
891{
892 .owner = THIS_MODULE,
893 .id = "MPU401",
894 .info = NULL,
895 .midi_dev = 0,
896 .synth_type = SYNTH_TYPE_MIDI,
897 .synth_subtype = 0,
898 .open = mpu_synth_open,
899 .close = mpu_synth_close,
900 .ioctl = mpu_synth_ioctl,
901 .kill_note = midi_synth_kill_note,
902 .start_note = midi_synth_start_note,
903 .set_instr = midi_synth_set_instr,
904 .reset = midi_synth_reset,
905 .hw_control = midi_synth_hw_control,
906 .load_patch = midi_synth_load_patch,
907 .aftertouch = midi_synth_aftertouch,
908 .controller = midi_synth_controller,
909 .panning = midi_synth_panning,
910 .bender = midi_synth_bender,
911 .setup_voice = midi_synth_setup_voice,
912 .send_sysex = midi_synth_send_sysex
913};
914
915static struct synth_operations *mpu401_synth_operations[MAX_MIDI_DEV];
916
917static struct midi_operations mpu401_midi_proto =
918{
919 .owner = THIS_MODULE,
920 .info = {"MPU-401 Midi", 0, MIDI_CAP_MPU401, SNDCARD_MPU401},
921 .in_info = {0},
922 .open = mpu401_open,
923 .close = mpu401_close,
924 .ioctl = mpu401_ioctl,
925 .outputc = mpu401_out,
926 .start_read = mpu401_start_read,
927 .end_read = mpu401_end_read,
928 .kick = mpu401_kick,
929 .buffer_status = mpu401_buffer_status,
930 .prefix_cmd = mpu401_prefix_cmd
931};
932
933static struct midi_operations mpu401_midi_operations[MAX_MIDI_DEV];
934
935static void mpu401_chk_version(int n, struct mpu_config *devc)
936{
937 int tmp;
938 unsigned long flags;
939
940 devc->version = devc->revision = 0;
941
942 spin_lock_irqsave(&devc->lock,flags);
943 if ((tmp = mpu_cmd(n, 0xAC, 0)) < 0)
944 {
945 spin_unlock_irqrestore(&devc->lock,flags);
946 return;
947 }
948 if ((tmp & 0xf0) > 0x20) /* Why it's larger than 2.x ??? */
949 {
950 spin_unlock_irqrestore(&devc->lock,flags);
951 return;
952 }
953 devc->version = tmp;
954
955 if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0)
956 {
957 devc->version = 0;
958 spin_unlock_irqrestore(&devc->lock,flags);
959 return;
960 }
961 devc->revision = tmp;
962 spin_unlock_irqrestore(&devc->lock,flags);
963}
964
965int attach_mpu401(struct address_info *hw_config, struct module *owner)
966{
967 unsigned long flags;
968 char revision_char;
969
970 int m, ret;
971 struct mpu_config *devc;
972
973 hw_config->slots[1] = -1;
974 m = sound_alloc_mididev();
975 if (m == -1)
976 {
977 printk(KERN_WARNING "MPU-401: Too many midi devices detected\n");
978 ret = -ENOMEM;
979 goto out_err;
980 }
981 devc = &dev_conf[m];
982 devc->base = hw_config->io_base;
983 devc->osp = hw_config->osp;
984 devc->irq = hw_config->irq;
985 devc->opened = 0;
986 devc->uart_mode = 0;
987 devc->initialized = 0;
988 devc->version = 0;
989 devc->revision = 0;
990 devc->capabilities = 0;
991 devc->timer_flag = 0;
992 devc->m_busy = 0;
993 devc->m_state = ST_INIT;
994 devc->shared_irq = hw_config->always_detect;
995 devc->irq = hw_config->irq;
996 spin_lock_init(&devc->lock);
997
998 if (devc->irq < 0)
999 {
1000 devc->irq *= -1;
1001 devc->shared_irq = 1;
1002 }
1003
1004 if (!hw_config->always_detect)
1005 {
1006 /* Verify the hardware again */
1007 if (!reset_mpu401(devc))
1008 {
1009 printk(KERN_WARNING "mpu401: Device didn't respond\n");
1010 ret = -ENODEV;
1011 goto out_mididev;
1012 }
1013 if (!devc->shared_irq)
1014 {
1015 if (request_irq(devc->irq, mpuintr, 0, "mpu401", (void *)m) < 0)
1016 {
1017 printk(KERN_WARNING "mpu401: Failed to allocate IRQ%d\n", devc->irq);
1018 ret = -ENOMEM;
1019 goto out_mididev;
1020 }
1021 }
1022 spin_lock_irqsave(&devc->lock,flags);
1023 mpu401_chk_version(m, devc);
1024 if (devc->version == 0)
1025 mpu401_chk_version(m, devc);
1026 spin_unlock_irqrestore(&devc->lock,flags);
1027 }
1028
1029 if (devc->version != 0)
1030 if (mpu_cmd(m, 0xC5, 0) >= 0) /* Set timebase OK */
1031 if (mpu_cmd(m, 0xE0, 120) >= 0) /* Set tempo OK */
1032 devc->capabilities |= MPU_CAP_INTLG; /* Supports intelligent mode */
1033
1034
1035 mpu401_synth_operations[m] = (struct synth_operations *)kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
1036
1037 if (mpu401_synth_operations[m] == NULL)
1038 {
1039 printk(KERN_ERR "mpu401: Can't allocate memory\n");
1040 ret = -ENOMEM;
1041 goto out_irq;
1042 }
1043 if (!(devc->capabilities & MPU_CAP_INTLG)) /* No intelligent mode */
1044 {
1045 memcpy((char *) mpu401_synth_operations[m],
1046 (char *) &std_midi_synth,
1047 sizeof(struct synth_operations));
1048 }
1049 else
1050 {
1051 memcpy((char *) mpu401_synth_operations[m],
1052 (char *) &mpu401_synth_proto,
1053 sizeof(struct synth_operations));
1054 }
1055 if (owner)
1056 mpu401_synth_operations[m]->owner = owner;
1057
1058 memcpy((char *) &mpu401_midi_operations[m],
1059 (char *) &mpu401_midi_proto,
1060 sizeof(struct midi_operations));
1061
1062 mpu401_midi_operations[m].converter = mpu401_synth_operations[m];
1063
1064 memcpy((char *) &mpu_synth_info[m],
1065 (char *) &mpu_synth_info_proto,
1066 sizeof(struct synth_info));
1067
1068 n_mpu_devs++;
1069
1070 if (devc->version == 0x20 && devc->revision >= 0x07) /* MusicQuest interface */
1071 {
1072 int ports = (devc->revision & 0x08) ? 32 : 16;
1073
1074 devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_SMPTE |
1075 MPU_CAP_CLS | MPU_CAP_2PORT;
1076
1077 revision_char = (devc->revision == 0x7f) ? 'M' : ' ';
1078 sprintf(mpu_synth_info[m].name, "MQX-%d%c MIDI Interface #%d",
1079 ports,
1080 revision_char,
1081 n_mpu_devs);
1082 }
1083 else
1084 {
1085 revision_char = devc->revision ? devc->revision + '@' : ' ';
1086 if ((int) devc->revision > ('Z' - '@'))
1087 revision_char = '+';
1088
1089 devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_FSK;
1090
1091 if (hw_config->name)
1092 sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
1093 else
1094 sprintf(mpu_synth_info[m].name,
1095 "MPU-401 %d.%d%c Midi interface #%d",
1096 (int) (devc->version & 0xf0) >> 4,
1097 devc->version & 0x0f,
1098 revision_char,
1099 n_mpu_devs);
1100 }
1101
1102 strcpy(mpu401_midi_operations[m].info.name,
1103 mpu_synth_info[m].name);
1104
1105 conf_printf(mpu_synth_info[m].name, hw_config);
1106
1107 mpu401_synth_operations[m]->midi_dev = devc->devno = m;
1108 mpu401_synth_operations[devc->devno]->info = &mpu_synth_info[devc->devno];
1109
1110 if (devc->capabilities & MPU_CAP_INTLG) /* Intelligent mode */
1111 hw_config->slots[2] = mpu_timer_init(m);
1112
1113 midi_devs[m] = &mpu401_midi_operations[devc->devno];
1114
1115 if (owner)
1116 midi_devs[m]->owner = owner;
1117
1118 hw_config->slots[1] = m;
1119 sequencer_init();
1120
1121 return 0;
1122
1123out_irq:
1124 free_irq(devc->irq, (void *)m);
1125out_mididev:
1126 sound_unload_mididev(m);
1127out_err:
1128 release_region(hw_config->io_base, 2);
1129 return ret;
1130}
1131
1132static int reset_mpu401(struct mpu_config *devc)
1133{
1134 unsigned long flags;
1135 int ok, timeout, n;
1136 int timeout_limit;
1137
1138 /*
1139 * Send the RESET command. Try again if no success at the first time.
1140 * (If the device is in the UART mode, it will not ack the reset cmd).
1141 */
1142
1143 ok = 0;
1144
1145 timeout_limit = devc->initialized ? 30000 : 100000;
1146 devc->initialized = 1;
1147
1148 for (n = 0; n < 2 && !ok; n++)
1149 {
1150 for (timeout = timeout_limit; timeout > 0 && !ok; timeout--)
1151 ok = output_ready(devc);
1152
1153 write_command(devc, MPU_RESET); /*
1154 * Send MPU-401 RESET Command
1155 */
1156
1157 /*
1158 * Wait at least 25 msec. This method is not accurate so let's make the
1159 * loop bit longer. Cannot sleep since this is called during boot.
1160 */
1161
1162 for (timeout = timeout_limit * 2; timeout > 0 && !ok; timeout--)
1163 {
1164 spin_lock_irqsave(&devc->lock,flags);
1165 if (input_avail(devc))
1166 if (read_data(devc) == MPU_ACK)
1167 ok = 1;
1168 spin_unlock_irqrestore(&devc->lock,flags);
1169 }
1170
1171 }
1172
1173 devc->m_state = ST_INIT;
1174 devc->m_ptr = 0;
1175 devc->m_left = 0;
1176 devc->last_status = 0;
1177 devc->uart_mode = 0;
1178
1179 return ok;
1180}
1181
1182static void set_uart_mode(int dev, struct mpu_config *devc, int arg)
1183{
1184 if (!arg && (devc->capabilities & MPU_CAP_INTLG))
1185 return;
1186 if ((devc->uart_mode == 0) == (arg == 0))
1187 return; /* Already set */
1188 reset_mpu401(devc); /* This exits the uart mode */
1189
1190 if (arg)
1191 {
1192 if (mpu_cmd(dev, UART_MODE_ON, 0) < 0)
1193 {
1194 printk(KERN_ERR "mpu401: Can't enter UART mode\n");
1195 devc->uart_mode = 0;
1196 return;
1197 }
1198 }
1199 devc->uart_mode = arg;
1200
1201}
1202
1203int probe_mpu401(struct address_info *hw_config, struct resource *ports)
1204{
1205 int ok = 0;
1206 struct mpu_config tmp_devc;
1207
1208 tmp_devc.base = hw_config->io_base;
1209 tmp_devc.irq = hw_config->irq;
1210 tmp_devc.initialized = 0;
1211 tmp_devc.opened = 0;
1212 tmp_devc.osp = hw_config->osp;
1213
1214 if (hw_config->always_detect)
1215 return 1;
1216
1217 if (inb(hw_config->io_base + 1) == 0xff)
1218 {
1219 DDB(printk("MPU401: Port %x looks dead.\n", hw_config->io_base));
1220 return 0; /* Just bus float? */
1221 }
1222 ok = reset_mpu401(&tmp_devc);
1223
1224 if (!ok)
1225 {
1226 DDB(printk("MPU401: Reset failed on port %x\n", hw_config->io_base));
1227 }
1228 return ok;
1229}
1230
1231void unload_mpu401(struct address_info *hw_config)
1232{
1233 void *p;
1234 int n=hw_config->slots[1];
1235
1236 if (n != -1) {
1237 release_region(hw_config->io_base, 2);
1238 if (hw_config->always_detect == 0 && hw_config->irq > 0)
1239 free_irq(hw_config->irq, (void *)n);
1240 p=mpu401_synth_operations[n];
1241 sound_unload_mididev(n);
1242 sound_unload_timerdev(hw_config->slots[2]);
1243 if(p)
1244 kfree(p);
1245 }
1246}
1247
1248/*****************************************************
1249 * Timer stuff
1250 ****************************************************/
1251
1252static volatile int timer_initialized = 0, timer_open = 0, tmr_running = 0;
1253static volatile int curr_tempo, curr_timebase, hw_timebase;
1254static int max_timebase = 8; /* 8*24=192 ppqn */
1255static volatile unsigned long next_event_time;
1256static volatile unsigned long curr_ticks, curr_clocks;
1257static unsigned long prev_event_time;
1258static int metronome_mode;
1259
1260static unsigned long clocks2ticks(unsigned long clocks)
1261{
1262 /*
1263 * The MPU-401 supports just a limited set of possible timebase values.
1264 * Since the applications require more choices, the driver has to
1265 * program the HW to do its best and to convert between the HW and
1266 * actual timebases.
1267 */
1268 return ((clocks * curr_timebase) + (hw_timebase / 2)) / hw_timebase;
1269}
1270
1271static void set_timebase(int midi_dev, int val)
1272{
1273 int hw_val;
1274
1275 if (val < 48)
1276 val = 48;
1277 if (val > 1000)
1278 val = 1000;
1279
1280 hw_val = val;
1281 hw_val = (hw_val + 12) / 24;
1282 if (hw_val > max_timebase)
1283 hw_val = max_timebase;
1284
1285 if (mpu_cmd(midi_dev, 0xC0 | (hw_val & 0x0f), 0) < 0)
1286 {
1287 printk(KERN_WARNING "mpu401: Can't set HW timebase to %d\n", hw_val * 24);
1288 return;
1289 }
1290 hw_timebase = hw_val * 24;
1291 curr_timebase = val;
1292
1293}
1294
1295static void tmr_reset(struct mpu_config *devc)
1296{
1297 unsigned long flags;
1298
1299 spin_lock_irqsave(&devc->lock,flags);
1300 next_event_time = (unsigned long) -1;
1301 prev_event_time = 0;
1302 curr_ticks = curr_clocks = 0;
1303 spin_unlock_irqrestore(&devc->lock,flags);
1304}
1305
1306static void set_timer_mode(int midi_dev)
1307{
1308 if (timer_mode & TMR_MODE_CLS)
1309 mpu_cmd(midi_dev, 0x3c, 0); /* Use CLS sync */
1310 else if (timer_mode & TMR_MODE_SMPTE)
1311 mpu_cmd(midi_dev, 0x3d, 0); /* Use SMPTE sync */
1312
1313 if (timer_mode & TMR_INTERNAL)
1314 {
1315 mpu_cmd(midi_dev, 0x80, 0); /* Use MIDI sync */
1316 }
1317 else
1318 {
1319 if (timer_mode & (TMR_MODE_MIDI | TMR_MODE_CLS))
1320 {
1321 mpu_cmd(midi_dev, 0x82, 0); /* Use MIDI sync */
1322 mpu_cmd(midi_dev, 0x91, 0); /* Enable ext MIDI ctrl */
1323 }
1324 else if (timer_mode & TMR_MODE_FSK)
1325 mpu_cmd(midi_dev, 0x81, 0); /* Use FSK sync */
1326 }
1327}
1328
1329static void stop_metronome(int midi_dev)
1330{
1331 mpu_cmd(midi_dev, 0x84, 0); /* Disable metronome */
1332}
1333
1334static void setup_metronome(int midi_dev)
1335{
1336 int numerator, denominator;
1337 int clks_per_click, num_32nds_per_beat;
1338 int beats_per_measure;
1339
1340 numerator = ((unsigned) metronome_mode >> 24) & 0xff;
1341 denominator = ((unsigned) metronome_mode >> 16) & 0xff;
1342 clks_per_click = ((unsigned) metronome_mode >> 8) & 0xff;
1343 num_32nds_per_beat = (unsigned) metronome_mode & 0xff;
1344 beats_per_measure = (numerator * 4) >> denominator;
1345
1346 if (!metronome_mode)
1347 mpu_cmd(midi_dev, 0x84, 0); /* Disable metronome */
1348 else
1349 {
1350 mpu_cmd(midi_dev, 0xE4, clks_per_click);
1351 mpu_cmd(midi_dev, 0xE6, beats_per_measure);
1352 mpu_cmd(midi_dev, 0x83, 0); /* Enable metronome without accents */
1353 }
1354}
1355
1356static int mpu_start_timer(int midi_dev)
1357{
1358 struct mpu_config *devc= &dev_conf[midi_dev];
1359
1360 tmr_reset(devc);
1361 set_timer_mode(midi_dev);
1362
1363 if (tmr_running)
1364 return TIMER_NOT_ARMED; /* Already running */
1365
1366 if (timer_mode & TMR_INTERNAL)
1367 {
1368 mpu_cmd(midi_dev, 0x02, 0); /* Send MIDI start */
1369 tmr_running = 1;
1370 return TIMER_NOT_ARMED;
1371 }
1372 else
1373 {
1374 mpu_cmd(midi_dev, 0x35, 0); /* Enable mode messages to PC */
1375 mpu_cmd(midi_dev, 0x38, 0); /* Enable sys common messages to PC */
1376 mpu_cmd(midi_dev, 0x39, 0); /* Enable real time messages to PC */
1377 mpu_cmd(midi_dev, 0x97, 0); /* Enable system exclusive messages to PC */
1378 }
1379 return TIMER_ARMED;
1380}
1381
1382static int mpu_timer_open(int dev, int mode)
1383{
1384 int midi_dev = sound_timer_devs[dev]->devlink;
1385 struct mpu_config *devc= &dev_conf[midi_dev];
1386
1387 if (timer_open)
1388 return -EBUSY;
1389
1390 tmr_reset(devc);
1391 curr_tempo = 50;
1392 mpu_cmd(midi_dev, 0xE0, 50);
1393 curr_timebase = hw_timebase = 120;
1394 set_timebase(midi_dev, 120);
1395 timer_open = 1;
1396 metronome_mode = 0;
1397 set_timer_mode(midi_dev);
1398
1399 mpu_cmd(midi_dev, 0xe7, 0x04); /* Send all clocks to host */
1400 mpu_cmd(midi_dev, 0x95, 0); /* Enable clock to host */
1401
1402 return 0;
1403}
1404
1405static void mpu_timer_close(int dev)
1406{
1407 int midi_dev = sound_timer_devs[dev]->devlink;
1408
1409 timer_open = tmr_running = 0;
1410 mpu_cmd(midi_dev, 0x15, 0); /* Stop all */
1411 mpu_cmd(midi_dev, 0x94, 0); /* Disable clock to host */
1412 mpu_cmd(midi_dev, 0x8c, 0); /* Disable measure end messages to host */
1413 stop_metronome(midi_dev);
1414}
1415
1416static int mpu_timer_event(int dev, unsigned char *event)
1417{
1418 unsigned char command = event[1];
1419 unsigned long parm = *(unsigned int *) &event[4];
1420 int midi_dev = sound_timer_devs[dev]->devlink;
1421
1422 switch (command)
1423 {
1424 case TMR_WAIT_REL:
1425 parm += prev_event_time;
1426 case TMR_WAIT_ABS:
1427 if (parm > 0)
1428 {
1429 long time;
1430
1431 if (parm <= curr_ticks) /* It's the time */
1432 return TIMER_NOT_ARMED;
1433 time = parm;
1434 next_event_time = prev_event_time = time;
1435
1436 return TIMER_ARMED;
1437 }
1438 break;
1439
1440 case TMR_START:
1441 if (tmr_running)
1442 break;
1443 return mpu_start_timer(midi_dev);
1444
1445 case TMR_STOP:
1446 mpu_cmd(midi_dev, 0x01, 0); /* Send MIDI stop */
1447 stop_metronome(midi_dev);
1448 tmr_running = 0;
1449 break;
1450
1451 case TMR_CONTINUE:
1452 if (tmr_running)
1453 break;
1454 mpu_cmd(midi_dev, 0x03, 0); /* Send MIDI continue */
1455 setup_metronome(midi_dev);
1456 tmr_running = 1;
1457 break;
1458
1459 case TMR_TEMPO:
1460 if (parm)
1461 {
1462 if (parm < 8)
1463 parm = 8;
1464 if (parm > 250)
1465 parm = 250;
1466 if (mpu_cmd(midi_dev, 0xE0, parm) < 0)
1467 printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) parm);
1468 curr_tempo = parm;
1469 }
1470 break;
1471
1472 case TMR_ECHO:
1473 seq_copy_to_input(event, 8);
1474 break;
1475
1476 case TMR_TIMESIG:
1477 if (metronome_mode) /* Metronome enabled */
1478 {
1479 metronome_mode = parm;
1480 setup_metronome(midi_dev);
1481 }
1482 break;
1483
1484 default:;
1485 }
1486 return TIMER_NOT_ARMED;
1487}
1488
1489static unsigned long mpu_timer_get_time(int dev)
1490{
1491 if (!timer_open)
1492 return 0;
1493
1494 return curr_ticks;
1495}
1496
1497static int mpu_timer_ioctl(int dev, unsigned int command, void __user *arg)
1498{
1499 int midi_dev = sound_timer_devs[dev]->devlink;
1500 int __user *p = (int __user *)arg;
1501
1502 switch (command)
1503 {
1504 case SNDCTL_TMR_SOURCE:
1505 {
1506 int parm;
1507
1508 if (get_user(parm, p))
1509 return -EFAULT;
1510 parm &= timer_caps;
1511
1512 if (parm != 0)
1513 {
1514 timer_mode = parm;
1515
1516 if (timer_mode & TMR_MODE_CLS)
1517 mpu_cmd(midi_dev, 0x3c, 0); /* Use CLS sync */
1518 else if (timer_mode & TMR_MODE_SMPTE)
1519 mpu_cmd(midi_dev, 0x3d, 0); /* Use SMPTE sync */
1520 }
1521 if (put_user(timer_mode, p))
1522 return -EFAULT;
1523 return timer_mode;
1524 }
1525 break;
1526
1527 case SNDCTL_TMR_START:
1528 mpu_start_timer(midi_dev);
1529 return 0;
1530
1531 case SNDCTL_TMR_STOP:
1532 tmr_running = 0;
1533 mpu_cmd(midi_dev, 0x01, 0); /* Send MIDI stop */
1534 stop_metronome(midi_dev);
1535 return 0;
1536
1537 case SNDCTL_TMR_CONTINUE:
1538 if (tmr_running)
1539 return 0;
1540 tmr_running = 1;
1541 mpu_cmd(midi_dev, 0x03, 0); /* Send MIDI continue */
1542 return 0;
1543
1544 case SNDCTL_TMR_TIMEBASE:
1545 {
1546 int val;
1547 if (get_user(val, p))
1548 return -EFAULT;
1549 if (val)
1550 set_timebase(midi_dev, val);
1551 if (put_user(curr_timebase, p))
1552 return -EFAULT;
1553 return curr_timebase;
1554 }
1555 break;
1556
1557 case SNDCTL_TMR_TEMPO:
1558 {
1559 int val;
1560 int ret;
1561
1562 if (get_user(val, p))
1563 return -EFAULT;
1564
1565 if (val)
1566 {
1567 if (val < 8)
1568 val = 8;
1569 if (val > 250)
1570 val = 250;
1571 if ((ret = mpu_cmd(midi_dev, 0xE0, val)) < 0)
1572 {
1573 printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) val);
1574 return ret;
1575 }
1576 curr_tempo = val;
1577 }
1578 if (put_user(curr_tempo, p))
1579 return -EFAULT;
1580 return curr_tempo;
1581 }
1582 break;
1583
1584 case SNDCTL_SEQ_CTRLRATE:
1585 {
1586 int val;
1587 if (get_user(val, p))
1588 return -EFAULT;
1589
1590 if (val != 0) /* Can't change */
1591 return -EINVAL;
1592 val = ((curr_tempo * curr_timebase) + 30)/60;
1593 if (put_user(val, p))
1594 return -EFAULT;
1595 return val;
1596 }
1597 break;
1598
1599 case SNDCTL_SEQ_GETTIME:
1600 if (put_user(curr_ticks, p))
1601 return -EFAULT;
1602 return curr_ticks;
1603
1604 case SNDCTL_TMR_METRONOME:
1605 if (get_user(metronome_mode, p))
1606 return -EFAULT;
1607 setup_metronome(midi_dev);
1608 return 0;
1609
1610 default:;
1611 }
1612 return -EINVAL;
1613}
1614
1615static void mpu_timer_arm(int dev, long time)
1616{
1617 if (time < 0)
1618 time = curr_ticks + 1;
1619 else if (time <= curr_ticks) /* It's the time */
1620 return;
1621 next_event_time = prev_event_time = time;
1622 return;
1623}
1624
1625static struct sound_timer_operations mpu_timer =
1626{
1627 .owner = THIS_MODULE,
1628 .info = {"MPU-401 Timer", 0},
1629 .priority = 10, /* Priority */
1630 .devlink = 0, /* Local device link */
1631 .open = mpu_timer_open,
1632 .close = mpu_timer_close,
1633 .event = mpu_timer_event,
1634 .get_time = mpu_timer_get_time,
1635 .ioctl = mpu_timer_ioctl,
1636 .arm_timer = mpu_timer_arm
1637};
1638
1639static void mpu_timer_interrupt(void)
1640{
1641 if (!timer_open)
1642 return;
1643
1644 if (!tmr_running)
1645 return;
1646
1647 curr_clocks++;
1648 curr_ticks = clocks2ticks(curr_clocks);
1649
1650 if (curr_ticks >= next_event_time)
1651 {
1652 next_event_time = (unsigned long) -1;
1653 sequencer_timer(0);
1654 }
1655}
1656
1657static void timer_ext_event(struct mpu_config *devc, int event, int parm)
1658{
1659 int midi_dev = devc->devno;
1660
1661 if (!devc->timer_flag)
1662 return;
1663
1664 switch (event)
1665 {
1666 case TMR_CLOCK:
1667 printk("<MIDI clk>");
1668 break;
1669
1670 case TMR_START:
1671 printk("Ext MIDI start\n");
1672 if (!tmr_running)
1673 {
1674 if (timer_mode & TMR_EXTERNAL)
1675 {
1676 tmr_running = 1;
1677 setup_metronome(midi_dev);
1678 next_event_time = 0;
1679 STORE(SEQ_START_TIMER());
1680 }
1681 }
1682 break;
1683
1684 case TMR_STOP:
1685 printk("Ext MIDI stop\n");
1686 if (timer_mode & TMR_EXTERNAL)
1687 {
1688 tmr_running = 0;
1689 stop_metronome(midi_dev);
1690 STORE(SEQ_STOP_TIMER());
1691 }
1692 break;
1693
1694 case TMR_CONTINUE:
1695 printk("Ext MIDI continue\n");
1696 if (timer_mode & TMR_EXTERNAL)
1697 {
1698 tmr_running = 1;
1699 setup_metronome(midi_dev);
1700 STORE(SEQ_CONTINUE_TIMER());
1701 }
1702 break;
1703
1704 case TMR_SPP:
1705 printk("Songpos: %d\n", parm);
1706 if (timer_mode & TMR_EXTERNAL)
1707 {
1708 STORE(SEQ_SONGPOS(parm));
1709 }
1710 break;
1711 }
1712}
1713
1714static int mpu_timer_init(int midi_dev)
1715{
1716 struct mpu_config *devc;
1717 int n;
1718
1719 devc = &dev_conf[midi_dev];
1720
1721 if (timer_initialized)
1722 return -1; /* There is already a similar timer */
1723
1724 timer_initialized = 1;
1725
1726 mpu_timer.devlink = midi_dev;
1727 dev_conf[midi_dev].timer_flag = 1;
1728
1729 n = sound_alloc_timerdev();
1730 if (n == -1)
1731 n = 0;
1732 sound_timer_devs[n] = &mpu_timer;
1733
1734 if (devc->version < 0x20) /* Original MPU-401 */
1735 timer_caps = TMR_INTERNAL | TMR_EXTERNAL | TMR_MODE_FSK | TMR_MODE_MIDI;
1736 else
1737 {
1738 /*
1739 * The version number 2.0 is used (at least) by the
1740 * MusicQuest cards and the Roland Super-MPU.
1741 *
1742 * MusicQuest has given a special meaning to the bits of the
1743 * revision number. The Super-MPU returns 0.
1744 */
1745
1746 if (devc->revision)
1747 timer_caps |= TMR_EXTERNAL | TMR_MODE_MIDI;
1748
1749 if (devc->revision & 0x02)
1750 timer_caps |= TMR_MODE_CLS;
1751
1752
1753 if (devc->revision & 0x40)
1754 max_timebase = 10; /* Has the 216 and 240 ppqn modes */
1755 }
1756
1757 timer_mode = (TMR_INTERNAL | TMR_MODE_MIDI) & timer_caps;
1758 return n;
1759
1760}
1761
1762EXPORT_SYMBOL(probe_mpu401);
1763EXPORT_SYMBOL(attach_mpu401);
1764EXPORT_SYMBOL(unload_mpu401);
1765EXPORT_SYMBOL(intchk_mpu401);
1766EXPORT_SYMBOL(mpuintr);
1767
1768static struct address_info cfg;
1769
1770static int io = -1;
1771static int irq = -1;
1772
1773module_param(irq, int, 0);
1774module_param(io, int, 0);
1775
1776static int __init init_mpu401(void)
1777{
1778 int ret;
1779 /* Can be loaded either for module use or to provide functions
1780 to others */
1781 if (io != -1 && irq != -1) {
1782 struct resource *ports;
1783 cfg.irq = irq;
1784 cfg.io_base = io;
1785 ports = request_region(io, 2, "mpu401");
1786 if (!ports)
1787 return -EBUSY;
1788 if (probe_mpu401(&cfg, ports) == 0) {
1789 release_region(io, 2);
1790 return -ENODEV;
1791 }
1792 if ((ret = attach_mpu401(&cfg, THIS_MODULE)))
1793 return ret;
1794 }
1795
1796 return 0;
1797}
1798
1799static void __exit cleanup_mpu401(void)
1800{
1801 if (io != -1 && irq != -1) {
1802 /* Check for use by, for example, sscape driver */
1803 unload_mpu401(&cfg);
1804 }
1805}
1806
1807module_init(init_mpu401);
1808module_exit(cleanup_mpu401);
1809
1810#ifndef MODULE
1811static int __init setup_mpu401(char *str)
1812{
1813 /* io, irq */
1814 int ints[3];
1815
1816 str = get_options(str, ARRAY_SIZE(ints), ints);
1817
1818 io = ints[1];
1819 irq = ints[2];
1820
1821 return 1;
1822}
1823
1824__setup("mpu401=", setup_mpu401);
1825#endif
1826MODULE_LICENSE("GPL");