1 files changed, 0 insertions, 60 deletions
diff --git a/sound/oss/maestro.h b/sound/oss/maestro.h
deleted file mode 100644
index 023ec7f968f9..000000000000
--- a/sound/oss/maestro.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *      Registers for the ESS PCI cards
- */
- 
-/*
- *      Memory access
- */
- 
-#define ESS_MEM_DATA            0x00
-#define ESS_MEM_INDEX           0x02
-/*
- *      AC-97 Codec port. Delay 1uS after each write. This is used to
- *      talk AC-97 (see intel.com). Write data then register.
- */
- 
-#define ESS_AC97_INDEX          0x30            /* byte wide */
-#define ESS_AC97_DATA           0x32
-/* 
- *      Reading is a bit different. You write register|0x80 to ubdex
- *      delay 1uS poll the low bit of index, when it clears read the
- *      data value.
- */
-/*
- *      Control port. Not yet fully understood
- *      The value 0xC090 gets loaded to it then 0x0000 and 0x2800
- *      to the data port. Then after 4uS the value 0x300 is written
- */
- 
-#define RING_BUS_CTRL_L         0x34
-#define RING_BUS_CTRL_H         0x36
-/*
- *      This is also used during setup. The value 0x17 is written to it
- */
- 
-#define ESS_SETUP_18            0x18
-/*
- *      And this one gets 0x000b
- */
- 
-#define ESS_SETUP_A2            0xA2
-/*
- *      And this 0x0000
- */
- 
-#define ESS_SETUP_A4            0xA4
-#define ESS_SETUP_A6            0xA6
-/*
- *      Stuff to do with Harpo - the wave stuff
- */
- 
-#define ESS_WAVETABLE_SIZE      0x14
-#define         ESS_WAVETABLE_2M        0xA180

diff --git a/sound/oss/maestro.h b/sound/oss/maestro.h deleted file mode 100644 index 023ec7f968f9..000000000000 --- a/sound/oss/maestro.h +++ /dev/null
@@ -1,60 +0,0 @@
1	/*
2	* Registers for the ESS PCI cards
3	*/
4
5	/*
6	* Memory access
7	*/
8
9	#define ESS_MEM_DATA 0x00
10	#define ESS_MEM_INDEX 0x02
11
12	/*
13	* AC-97 Codec port. Delay 1uS after each write. This is used to
14	* talk AC-97 (see intel.com). Write data then register.
15	*/
16
17	#define ESS_AC97_INDEX 0x30 /* byte wide */
18	#define ESS_AC97_DATA 0x32
19
20	/*
21	* Reading is a bit different. You write register\|0x80 to ubdex
22	* delay 1uS poll the low bit of index, when it clears read the
23	* data value.
24	*/
25
26	/*
27	* Control port. Not yet fully understood
28	* The value 0xC090 gets loaded to it then 0x0000 and 0x2800
29	* to the data port. Then after 4uS the value 0x300 is written
30	*/
31
32	#define RING_BUS_CTRL_L 0x34
33	#define RING_BUS_CTRL_H 0x36
34
35	/*
36	* This is also used during setup. The value 0x17 is written to it
37	*/
38
39	#define ESS_SETUP_18 0x18
40
41	/*
42	* And this one gets 0x000b
43	*/
44
45	#define ESS_SETUP_A2 0xA2
46
47	/*
48	* And this 0x0000
49	*/
50
51	#define ESS_SETUP_A4 0xA4
52	#define ESS_SETUP_A6 0xA6
53
54	/*
55	* Stuff to do with Harpo - the wave stuff
56	*/
57
58	#define ESS_WAVETABLE_SIZE 0x14
59	#define ESS_WAVETABLE_2M 0xA180
60