aboutsummaryrefslogtreecommitdiffstats
path: root/sound/oss/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'sound/oss/Kconfig')
-rw-r--r--sound/oss/Kconfig1120
1 files changed, 1120 insertions, 0 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
new file mode 100644
index 000000000000..d303c2ed6e5a
--- /dev/null
+++ b/sound/oss/Kconfig
@@ -0,0 +1,1120 @@
1# drivers/sound/Config.in
2#
3# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
4# More hacking for modularisation.
5#
6# Prompt user for primary drivers.
7config SOUND_BT878
8 tristate "BT878 audio dma"
9 depends on SOUND_PRIME!=n && SOUND
10 ---help---
11 Audio DMA support for bt878 based grabber boards. As you might have
12 already noticed, bt878 is listed with two functions in /proc/pci.
13 Function 0 does the video stuff (bt848 compatible), function 1 does
14 the same for audio data. This is a driver for the audio part of
15 the chip. If you say 'Y' here you get a oss-compatible dsp device
16 where you can record from. If you want just watch TV you probably
17 don't need this driver as most TV cards handle sound with a short
18 cable from the TV card to your sound card's line-in.
19
20 To compile this driver as a module, choose M here: the module will
21 be called btaudio.
22
23config SOUND_CMPCI
24 tristate "C-Media PCI (CMI8338/8738)"
25 depends on SOUND_PRIME!=n && SOUND && PCI
26 help
27 Say Y or M if you have a PCI sound card using the CMI8338
28 or the CMI8738 chipset. Data on these chips are available at
29 <http://www.cmedia.com.tw/>.
30
31 A userspace utility to control some internal registers of these
32 chips is available at
33 <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
34
35config SOUND_CMPCI_FM
36 bool "Enable legacy FM"
37 depends on SOUND_CMPCI && X86
38 help
39 Say Y here to enable the legacy FM (frequency-modulation) synthesizer
40 support on a card using the CMI8338 or CMI8378 chipset. Even it is
41 enabled, you need to set fmio as proper value to enable it.
42 Say N here if you don't need this.
43
44config SOUND_CMPCI_MIDI
45 bool "Enable legacy MPU-401"
46 depends on SOUND_CMPCI && X86
47 help
48 Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
49 card using the CMI8338 or CMI8378 chipset. Even it is enabled,
50 you need to set mpuio as proper value to enable it.
51 Say N here if you don't need this.
52
53config SOUND_CMPCI_JOYSTICK
54 bool "Enable joystick"
55 depends on SOUND_CMPCI && X86
56 help
57 Say Y here in order to enable the joystick port on a sound card using
58 the CMI8338 or the CMI8738 chipset. You need to config the
59 gameport support and set joystick parameter as 1 to use it.
60 Say N here if you don't need this.
61
62config SOUND_EMU10K1
63 tristate "Creative SBLive! (EMU10K1)"
64 depends on SOUND_PRIME!=n && SOUND && PCI
65 ---help---
66 Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
67 such as the Creative SBLive!, SB PCI512 or Emu-APS.
68
69 For more information on this driver and the degree of support for
70 the different card models please check:
71
72 <http://sourceforge.net/projects/emu10k1/>
73
74 It is now possible to load dsp microcode patches into the EMU10K1
75 chip. These patches are used to implement real time sound
76 processing effects which include for example: signal routing,
77 bass/treble control, AC3 passthrough, ...
78 Userspace tools to create new patches and load/unload them can be
79 found in the emu-tools package at the above URL.
80
81config MIDI_EMU10K1
82 bool "Creative SBLive! MIDI (EXPERIMENTAL)"
83 depends on SOUND_EMU10K1 && EXPERIMENTAL
84 help
85 Say Y if you want to be able to use the OSS /dev/sequencer
86 interface. This code is still experimental.
87
88config SOUND_FUSION
89 tristate "Crystal SoundFusion (CS4280/461x)"
90 depends on SOUND_PRIME!=n && SOUND
91 help
92 This module drives the Crystal SoundFusion devices (CS4280/46xx
93 series) when wired as native sound drivers with AC97 codecs. If
94 this driver does not work try the CS4232 driver.
95
96config SOUND_CS4281
97 tristate "Crystal Sound CS4281"
98 depends on SOUND_PRIME!=n && SOUND
99 help
100 Picture and feature list at
101 <http://www.pcbroker.com/crystal4281.html>.
102
103config SOUND_BCM_CS4297A
104 tristate "Crystal Sound CS4297a (for Swarm)"
105 depends on SOUND_PRIME!=n && SIBYTE_SWARM && SOUND
106 help
107 The BCM91250A has a Crystal CS4297a on synchronous serial
108 port B (in addition to the DB-9 serial port). Say Y or M
109 here to enable the sound chip instead of the UART. Also
110 note that CONFIG_KGDB should not be enabled at the same
111 time, since it also attempts to use this UART port.
112
113config SOUND_ES1370
114 tristate "Ensoniq AudioPCI (ES1370)"
115 depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
116 help
117 Say Y or M if you have a PCI sound card utilizing the Ensoniq
118 ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
119 out if your sound card uses an ES1370 without removing your
120 computer's cover, use lspci -n and look for the PCI ID
121 1274:5000. Since Ensoniq was bought by Creative Labs,
122 Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
123 This driver differs slightly from OSS/Free, so PLEASE READ
124 <file:Documentation/sound/oss/es1370>.
125
126config SOUND_ES1371
127 tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
128 depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
129 help
130 Say Y or M if you have a PCI sound card utilizing the Ensoniq
131 ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
132 your sound card uses an ES1371 without removing your computer's
133 cover, use lspci -n and look for the PCI ID 1274:1371. Since
134 Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
135 models are either ES1370 or ES1371 based. This driver differs
136 slightly from OSS/Free, so PLEASE READ
137 <file:Documentation/sound/oss/es1371>.
138
139config SOUND_ESSSOLO1
140 tristate "ESS Technology Solo1"
141 depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT && PCI
142 help
143 Say Y or M if you have a PCI sound card utilizing the ESS Technology
144 Solo1 chip. To find out if your sound card uses a
145 Solo1 chip without removing your computer's cover, use
146 lspci -n and look for the PCI ID 125D:1969. This driver
147 differs slightly from OSS/Free, so PLEASE READ
148 <file:Documentation/sound/oss/solo1>.
149
150config SOUND_MAESTRO
151 tristate "ESS Maestro, Maestro2, Maestro2E driver"
152 depends on SOUND_PRIME!=n && SOUND && PCI
153 help
154 Say Y or M if you have a sound system driven by ESS's Maestro line
155 of PCI sound chips. These include the Maestro 1, Maestro 2, and
156 Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
157 details.
158
159config SOUND_MAESTRO3
160 tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
161 depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
162 help
163 Say Y or M if you have a sound system driven by ESS's Maestro 3
164 PCI sound chip.
165
166config SOUND_ICH
167 tristate "Intel ICH (i8xx) audio support"
168 depends on SOUND_PRIME!=n && PCI
169 help
170 Support for integral audio in Intel's I/O Controller Hub (ICH)
171 chipset, as used on the 810/820/840 motherboards.
172
173config SOUND_HARMONY
174 tristate "PA Harmony audio driver"
175 depends on GSC_LASI && SOUND_PRIME!=n
176 help
177 Say 'Y' or 'M' to include support for Harmony soundchip
178 on HP 712, 715/new and many other GSC based machines.
179
180config SOUND_SONICVIBES
181 tristate "S3 SonicVibes"
182 depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
183 help
184 Say Y or M if you have a PCI sound card utilizing the S3
185 SonicVibes chipset. To find out if your sound card uses a
186 SonicVibes chip without removing your computer's cover, use
187 lspci -n and look for the PCI ID 5333:CA00. This driver
188 differs slightly from OSS/Free, so PLEASE READ
189 <file:Documentation/sound/oss/sonicvibes>.
190
191config SOUND_VWSND
192 tristate "SGI Visual Workstation Sound"
193 depends on SOUND_PRIME!=n && X86_VISWS && SOUND
194 help
195 Say Y or M if you have an SGI Visual Workstation and you want to be
196 able to use its on-board audio. Read
197 <file:Documentation/sound/oss/vwsnd> for more info on this driver's
198 capabilities.
199
200config SOUND_HAL2
201 tristate "SGI HAL2 sound (EXPERIMENTAL)"
202 depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL
203 help
204 Say Y or M if you have an SGI Indy system and want to be able to
205 use it's on-board A2 audio system.
206
207config SOUND_IT8172
208 tristate "IT8172G Sound"
209 depends on SOUND_PRIME!=n && (MIPS_ITE8172 || MIPS_IVR) && SOUND
210
211config SOUND_VRC5477
212 tristate "NEC Vrc5477 AC97 sound"
213 depends on SOUND_PRIME!=n && DDB5477 && SOUND
214 help
215 Say Y here to enable sound support for the NEC Vrc5477 chip, an
216 integrated, multi-function controller chip for MIPS CPUs. Works
217 with the AC97 codec.
218
219config SOUND_AU1000
220 tristate "Au1000 Sound"
221 depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND
222
223config SOUND_AU1550_AC97
224 tristate "Au1550 AC97 Sound"
225 depends on SOUND_PRIME!=n && SOC_AU1550 && SOUND
226
227config SOUND_TRIDENT
228 tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
229 depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
230 ---help---
231 Say Y or M if you have a PCI sound card utilizing the Trident
232 4DWave-DX/NX chipset or your mother board chipset has SiS 7018
233 or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded
234 in SiS960 Super South Bridge and SiS540/630 Single Chipset.
235 The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,
236 M1535+ or M1535D+ South Bridge.
237
238 Use lspci -n to find out if your sound card or chipset uses
239 Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands
240 for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID
241 10B9:5451 stands for ALi5451.
242
243 This driver supports S/PDIF in/out (record/playback) for ALi 5451
244 embedded in ALi M1535+ and M1535D+. Note that they aren't all
245 enabled by default; you can enable them by saying Y to "/proc file
246 system support" and "Sysctl support", and after the /proc file
247 system has been mounted, executing the command
248
249 command what is enabled
250
251 echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default).
252
253 echo 1>/proc/ALi5451 use S/PDIF out to output pcm data.
254
255 echo 2>/proc/ALi5451 use S/PDIF out to output non-pcm data.
256 (AC3...).
257
258 echo 3>/proc/ALi5451 record from Ac97 in(MIC, Line in...).
259 (Default).
260
261 echo 4>/proc/ALi5451 no matter Ac97 settings, record from S/PDIF
262 in.
263
264
265 This driver differs slightly from OSS/Free, so PLEASE READ the
266 comments at the top of <file:drivers/sound/trident.c>.
267
268config SOUND_MSNDCLAS
269 tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
270 depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
271 help
272 Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
273 Monterey (not for the Pinnacle or Fiji).
274
275 See <file:Documentation/sound/oss/MultiSound> for important information
276 about this driver. Note that it has been discontinued, but the
277 Voyetra Turtle Beach knowledge base entry for it is still available
278 at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
279
280comment "Compiled-in MSND Classic support requires firmware during compilation."
281 depends on SOUND_PRIME && SOUND_MSNDCLAS=y
282
283config MSNDCLAS_HAVE_BOOT
284 bool
285 depends on SOUND_MSNDCLAS=y && !STANDALONE
286 default y
287
288config MSNDCLAS_INIT_FILE
289 string "Full pathname of MSNDINIT.BIN firmware file"
290 depends on SOUND_MSNDCLAS
291 default "/etc/sound/msndinit.bin"
292 help
293 The MultiSound cards have two firmware files which are required for
294 operation, and are not currently included. These files can be
295 obtained from Turtle Beach. See
296 <file:Documentation/sound/oss/MultiSound> for information on how to
297 obtain this.
298
299config MSNDCLAS_PERM_FILE
300 string "Full pathname of MSNDPERM.BIN firmware file"
301 depends on SOUND_MSNDCLAS
302 default "/etc/sound/msndperm.bin"
303 help
304 The MultiSound cards have two firmware files which are required for
305 operation, and are not currently included. These files can be
306 obtained from Turtle Beach. See
307 <file:Documentation/sound/oss/MultiSound> for information on how to
308 obtain this.
309
310config MSNDCLAS_IRQ
311 int "MSND Classic IRQ 5, 7, 9, 10, 11, 12"
312 depends on SOUND_MSNDCLAS=y
313 default "5"
314 help
315 Interrupt Request line for the MultiSound Classic and related cards.
316
317config MSNDCLAS_MEM
318 hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000"
319 depends on SOUND_MSNDCLAS=y
320 default "D0000"
321 help
322 Memory-mapped I/O base address for the MultiSound Classic and
323 related cards.
324
325config MSNDCLAS_IO
326 hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
327 depends on SOUND_MSNDCLAS=y
328 default "290"
329 help
330 I/O port address for the MultiSound Classic and related cards.
331
332config SOUND_MSNDPIN
333 tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
334 depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
335 help
336 Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
337 See <file:Documentation/sound/oss/MultiSound> for important information
338 about this driver. Note that it has been discontinued, but the
339 Voyetra Turtle Beach knowledge base entry for it is still available
340 at <http://www.turtlebeach.com/site/kb_ftp/600.asp>.
341
342comment "Compiled-in MSND Pinnacle support requires firmware during compilation."
343 depends on SOUND_PRIME && SOUND_MSNDPIN=y
344
345config MSNDPIN_HAVE_BOOT
346 bool
347 depends on SOUND_MSNDPIN=y
348 default y
349
350config MSNDPIN_INIT_FILE
351 string "Full pathname of PNDSPINI.BIN firmware file"
352 depends on SOUND_MSNDPIN
353 default "/etc/sound/pndspini.bin"
354 help
355 The MultiSound cards have two firmware files which are required
356 for operation, and are not currently included. These files can be
357 obtained from Turtle Beach. See
358 <file:Documentation/sound/oss/MultiSound> for information on how to
359 obtain this.
360
361config MSNDPIN_PERM_FILE
362 string "Full pathname of PNDSPERM.BIN firmware file"
363 depends on SOUND_MSNDPIN
364 default "/etc/sound/pndsperm.bin"
365 help
366 The MultiSound cards have two firmware files which are required for
367 operation, and are not currently included. These files can be
368 obtained from Turtle Beach. See
369 <file:Documentation/sound/oss/MultiSound> for information on how to
370 obtain this.
371
372config MSNDPIN_IRQ
373 int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12"
374 depends on SOUND_MSNDPIN=y
375 default "5"
376 help
377 Interrupt request line for the primary synthesizer on MultiSound
378 Pinnacle and Fiji sound cards.
379
380config MSNDPIN_MEM
381 hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000"
382 depends on SOUND_MSNDPIN=y
383 default "D0000"
384 help
385 Memory-mapped I/O base address for the primary synthesizer on
386 MultiSound Pinnacle and Fiji sound cards.
387
388config MSNDPIN_IO
389 hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
390 depends on SOUND_MSNDPIN=y
391 default "290"
392 help
393 Memory-mapped I/O base address for the primary synthesizer on
394 MultiSound Pinnacle and Fiji sound cards.
395
396config MSNDPIN_DIGITAL
397 bool "MSND Pinnacle has S/PDIF I/O"
398 depends on SOUND_MSNDPIN=y
399 help
400 If you have the S/PDIF daughter board for the Pinnacle or Fiji,
401 answer Y here; otherwise, say N. If you have this, you will be able
402 to play and record from the S/PDIF port (digital signal). See
403 <file:Documentation/sound/oss/MultiSound> for information on how to make
404 use of this capability.
405
406config MSNDPIN_NONPNP
407 bool "MSND Pinnacle non-PnP Mode"
408 depends on SOUND_MSNDPIN=y
409 help
410 The Pinnacle and Fiji card resources can be configured either with
411 PnP, or through a configuration port. Say Y here if your card is NOT
412 in PnP mode. For the Pinnacle, configuration in non-PnP mode allows
413 use of the IDE and joystick peripherals on the card as well; these
414 do not show up when the card is in PnP mode. Specifying zero for any
415 resource of a device will disable the device. If you are running the
416 card in PnP mode, you must say N here and use isapnptools to
417 configure the card's resources.
418
419comment "MSND Pinnacle DSP section will be configured to above parameters."
420 depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
421
422config MSNDPIN_CFG
423 hex "MSND Pinnacle config port 250,260,270"
424 depends on MSNDPIN_NONPNP
425 default "250"
426 help
427 This is the port which the Pinnacle and Fiji uses to configure the
428 card's resources when not in PnP mode. If your card is in PnP mode,
429 then be sure to say N to the previous option, "MSND Pinnacle Non-PnP
430 Mode".
431
432comment "Pinnacle-specific Device Configuration (0 disables)"
433 depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
434
435config MSNDPIN_MPU_IO
436 hex "MSND Pinnacle MPU I/O (e.g. 330)"
437 depends on MSNDPIN_NONPNP
438 default "0"
439 help
440 Memory-mapped I/O base address for the Kurzweil daughterboard
441 synthesizer on MultiSound Pinnacle and Fiji sound cards.
442
443config MSNDPIN_MPU_IRQ
444 int "MSND Pinnacle MPU IRQ (e.g. 9)"
445 depends on MSNDPIN_NONPNP
446 default "0"
447 help
448 Interrupt request number for the Kurzweil daughterboard
449 synthesizer on MultiSound Pinnacle and Fiji sound cards.
450
451config MSNDPIN_IDE_IO0
452 hex "MSND Pinnacle IDE I/O 0 (e.g. 170)"
453 depends on MSNDPIN_NONPNP
454 default "0"
455 help
456 CD-ROM drive 0 memory-mapped I/O base address for the MultiSound
457 Pinnacle and Fiji sound cards.
458
459config MSNDPIN_IDE_IO1
460 hex "MSND Pinnacle IDE I/O 1 (e.g. 376)"
461 depends on MSNDPIN_NONPNP
462 default "0"
463 help
464 CD-ROM drive 1 memory-mapped I/O base address for the MultiSound
465 Pinnacle and Fiji sound cards.
466
467config MSNDPIN_IDE_IRQ
468 int "MSND Pinnacle IDE IRQ (e.g. 15)"
469 depends on MSNDPIN_NONPNP
470 default "0"
471 help
472 Interrupt request number for the IDE CD-ROM interface on the
473 MultiSound Pinnacle and Fiji sound cards.
474
475config MSNDPIN_JOYSTICK_IO
476 hex "MSND Pinnacle joystick I/O (e.g. 200)"
477 depends on MSNDPIN_NONPNP
478 default "0"
479 help
480 Memory-mapped I/O base address for the joystick port on MultiSound
481 Pinnacle and Fiji sound cards.
482
483config MSND_FIFOSIZE
484 int "MSND buffer size (kB)"
485 depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y)
486 default "128"
487 help
488 Configures the size of each audio buffer, in kilobytes, for
489 recording and playing in the MultiSound drivers (both the Classic
490 and Pinnacle). Larger values reduce the chance of data overruns at
491 the expense of overall latency. If unsure, use the default.
492
493config SOUND_VIA82CXXX
494 tristate "VIA 82C686 Audio Codec"
495 depends on SOUND_PRIME!=n && PCI
496 help
497 Say Y here to include support for the audio codec found on VIA
498 82Cxxx-based chips. Typically these are built into a motherboard.
499
500 DO NOT select Sound Blaster or Adlib with this driver, unless
501 you have a Sound Blaster or Adlib card in addition to your VIA
502 audio chip.
503
504config MIDI_VIA82CXXX
505 bool "VIA 82C686 MIDI"
506 depends on SOUND_VIA82CXXX
507 help
508 Answer Y to use the MIDI interface of the Via686. You may need to
509 enable this in the BIOS before it will work. This is for connection
510 to external MIDI hardware, and is not required for software playback
511 of MIDI files.
512
513config SOUND_OSS
514 tristate "OSS sound modules"
515 depends on SOUND_PRIME!=n && SOUND
516 help
517 OSS is the Open Sound System suite of sound card drivers. They make
518 sound programming easier since they provide a common API. Say Y or
519 M here (the module will be called sound) if you haven't found a
520 driver for your sound card above, then pick your driver from the
521 list below.
522
523config SOUND_TRACEINIT
524 bool "Verbose initialisation"
525 depends on SOUND_OSS
526 help
527 Verbose soundcard initialization -- affects the format of autoprobe
528 and initialization messages at boot time.
529
530config SOUND_DMAP
531 bool "Persistent DMA buffers"
532 depends on SOUND_OSS
533 ---help---
534 Linux can often have problems allocating DMA buffers for ISA sound
535 cards on machines with more than 16MB of RAM. This is because ISA
536 DMA buffers must exist below the 16MB boundary and it is quite
537 possible that a large enough free block in this region cannot be
538 found after the machine has been running for a while. If you say Y
539 here the DMA buffers (64Kb) will be allocated at boot time and kept
540 until the shutdown. This option is only useful if you said Y to
541 "OSS sound modules", above. If you said M to "OSS sound modules"
542 then you can get the persistent DMA buffer functionality by passing
543 the command-line argument "dmabuf=1" to the sound module.
544
545 Say Y unless you have 16MB or more RAM or a PCI sound card.
546
547config SOUND_AD1816
548 tristate "AD1816(A) based cards (EXPERIMENTAL)"
549 depends on EXPERIMENTAL && SOUND_OSS
550 help
551 Say M here if you have a sound card based on the Analog Devices
552 AD1816(A) chip.
553
554 If you compile the driver into the kernel, you have to add
555 "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
556
557config SOUND_AD1889
558 tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
559 depends on EXPERIMENTAL && SOUND_OSS
560 help
561 Say M here if you have a sound card based on the Analog Devices
562 AD1889 chip.
563
564config SOUND_SGALAXY
565 tristate "Aztech Sound Galaxy (non-PnP) cards"
566 depends on SOUND_OSS
567 help
568 This module initializes the older non Plug and Play sound galaxy
569 cards from Aztech. It supports the Waverider Pro 32 - 3D and the
570 Galaxy Washington 16.
571
572 If you compile the driver into the kernel, you have to add
573 "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
574 line.
575
576config SOUND_ADLIB
577 tristate "Adlib Cards"
578 depends on SOUND_OSS
579 help
580 Includes ASB 64 4D. Information on programming AdLib cards is
581 available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
582
583config SOUND_ACI_MIXER
584 tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
585 depends on SOUND_OSS
586 ---help---
587 ACI (Audio Command Interface) is a protocol used to communicate with
588 the microcontroller on some sound cards produced by miro and
589 Cardinal Technologies. The main function of the ACI is to control
590 the mixer and to get a product identification.
591
592 This VoxWare ACI driver currently supports the ACI functions on the
593 miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
594 also controls the radio tuner. This is supported in the video4linux
595 miropcm20 driver (say M or Y here and go back to "Multimedia
596 devices" -> "Radio Adapters").
597
598 This driver is also available as a module and will be called aci.
599
600config SOUND_CS4232
601 tristate "Crystal CS4232 based (PnP) cards"
602 depends on SOUND_OSS
603 help
604 Say Y here if you have a card based on the Crystal CS4232 chip set,
605 which uses its own Plug and Play protocol.
606
607 If you compile the driver into the kernel, you have to add
608 "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
609 command line.
610
611 See <file:Documentation/sound/oss/CS4232> for more information on
612 configuring this card.
613
614config SOUND_SSCAPE
615 tristate "Ensoniq SoundScape support"
616 depends on SOUND_OSS
617 help
618 Answer Y if you have a sound card based on the Ensoniq SoundScape
619 chipset. Such cards are being manufactured at least by Ensoniq, Spea
620 and Reveal (Reveal makes also other cards).
621
622 If you compile the driver into the kernel, you have to add
623 "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
624 line.
625
626config SOUND_GUS
627 tristate "Gravis Ultrasound support"
628 depends on SOUND_OSS
629 help
630 Say Y here for any type of Gravis Ultrasound card, including the GUS
631 or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
632 information on configuring this card with modules.
633
634 If you compile the driver into the kernel, you have to add
635 "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
636
637config SOUND_GUS16
638 bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
639 depends on SOUND_GUS
640 help
641 Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
642 sampling at 16-bit width.
643
644config SOUND_GUSMAX
645 bool "GUS MAX support"
646 depends on SOUND_GUS
647 help
648 Support for Gravis Ulstrasound MAX.
649
650config SOUND_VMIDI
651 tristate "Loopback MIDI device support"
652 depends on SOUND_OSS
653 help
654 Support for MIDI loopback on port 1 or 2.
655
656config SOUND_TRIX
657 tristate "MediaTrix AudioTrix Pro support"
658 depends on SOUND_OSS
659 help
660 Answer Y if you have the AudioTriX Pro sound card manufactured
661 by MediaTrix.
662
663config TRIX_HAVE_BOOT
664 bool "Have TRXPRO.HEX firmware file"
665 depends on SOUND_TRIX=y && !STANDALONE
666 help
667 The MediaTrix AudioTrix Pro has an on-board microcontroller which
668 needs to be initialized by downloading the code from the file
669 TRXPRO.HEX in the DOS driver directory. If you don't have the
670 TRXPRO.HEX file handy you may skip this step. However, the SB and
671 MPU-401 modes of AudioTrix Pro will not work without this file!
672
673config TRIX_BOOT_FILE
674 string "Full pathname of TRXPRO.HEX firmware file"
675 depends on TRIX_HAVE_BOOT
676 default "/etc/sound/trxpro.hex"
677 help
678 Enter the full pathname of your TRXPRO.HEX file, starting from /.
679
680config SOUND_MSS
681 tristate "Microsoft Sound System support"
682 depends on SOUND_OSS
683 ---help---
684 Again think carefully before answering Y to this question. It's
685 safe to answer Y if you have the original Windows Sound System card
686 made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). Also you may
687 say Y in case your card is NOT among these:
688
689 ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,
690 Ensoniq SoundScape (and compatibles made by Reveal and Spea),
691 Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,
692 Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,
693 Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi
694 82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft
695 Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid
696 SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro
697 Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,
698 Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound
699 Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M
700 notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM
701 synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
702
703 For cards having native support in VoxWare, consult the card
704 specific instructions in <file:Documentation/sound/oss/README.OSS>.
705 Some drivers have their own MSS support and saying Y to this option
706 will cause a conflict.
707
708 If you compile the driver into the kernel, you have to add
709 "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command
710 line.
711
712config SOUND_MPU401
713 tristate "MPU-401 support (NOT for SB16)"
714 depends on SOUND_OSS
715 ---help---
716 Be careful with this question. The MPU401 interface is supported by
717 all sound cards. However, some natively supported cards have their
718 own driver for MPU401. Enabling this MPU401 option with these cards
719 will cause a conflict. Also, enabling MPU401 on a system that
720 doesn't really have a MPU401 could cause some trouble. If your card
721 was in the list of supported cards, look at the card specific
722 instructions in the <file:Documentation/sound/oss/README.OSS> file. It
723 is safe to answer Y if you have a true MPU401 MIDI interface card.
724
725 If you compile the driver into the kernel, you have to add
726 "mpu401=<io>,<irq>" to the kernel command line.
727
728config SOUND_NM256
729 tristate "NM256AV/NM256ZX audio support"
730 depends on SOUND_OSS
731 help
732 Say M here to include audio support for the NeoMagic 256AV/256ZX
733 chipsets. These are the audio chipsets found in the Sony
734 Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
735 laptops. It includes support for an AC97-compatible mixer and an
736 apparently proprietary sound engine.
737
738 See <file:Documentation/sound/oss/NM256> for further information.
739
740config SOUND_MAD16
741 tristate "OPTi MAD16 and/or Mozart based cards"
742 depends on SOUND_OSS && SOUND_GAMEPORT
743 ---help---
744 Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
745 82C928 or 82C929 or 82C931) audio interface chip. These chips are
746 quite common so it's possible that many no-name cards have one of
747 them. In addition the MAD16 chip is used in some cards made by known
748 manufacturers such as Turtle Beach (Tropez), Reveal (some models)
749 and Diamond (latest ones). Note however that the Tropez sound cards
750 have their own driver; if you have one of those, say N here and Y or
751 M to "Full support for Turtle Beach WaveFront", below.
752
753 If you compile the driver into the kernel, you have to add
754 "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
755 kernel command line.
756
757 See also <file:Documentation/sound/oss/Opti> and
758 <file:Documentation/sound/oss/MAD16> for more information on setting
759 these cards up as modules.
760
761config MAD16_OLDCARD
762 bool "Support MIDI in older MAD16 based cards (requires SB)"
763 depends on SOUND_MAD16
764 help
765 Answer Y (or M) if you have an older card based on the C928 or
766 Mozart chipset and you want to have MIDI support. If you enable this
767 option you also need to enable support for Sound Blaster.
768
769config SOUND_PAS
770 tristate "ProAudioSpectrum 16 support"
771 depends on SOUND_OSS
772 ---help---
773 Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
774 16 or Logitech SoundMan 16 sound card. Answer N if you have some
775 other card made by Media Vision or Logitech since those are not
776 PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>.
777 It is not necessary to add Sound Blaster support separately; it
778 is included in PAS support.
779
780 If you compile the driver into the kernel, you have to add
781 "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2>
782 to the kernel command line.
783
784config PAS_JOYSTICK
785 bool "Enable PAS16 joystick port"
786 depends on SOUND_PAS=y
787 help
788 Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick
789 port.
790
791config SOUND_PSS
792 tristate "PSS (AD1848, ADSP-2115, ESC614) support"
793 depends on SOUND_OSS
794 help
795 Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
796 ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
797 ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
798 how to compile it into the kernel or as a module see the file
799 <file:Documentation/sound/oss/PSS>.
800
801 If you compile the driver into the kernel, you have to add
802 "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
803 command line.
804
805config PSS_MIXER
806 bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)"
807 depends on SOUND_PSS
808 help
809 Answer Y for Beethoven ADSP-16. You may try to say Y also for other
810 cards if they have master volume, bass, treble, and you can't
811 control it under Linux. If you answer N for Beethoven ADSP-16, you
812 can't control master volume, bass, treble and synth volume.
813
814 If you said M to "PSS support" above, you may enable or disable this
815 PSS mixer with the module parameter pss_mixer. For more information
816 see the file <file:Documentation/sound/oss/PSS>.
817
818config PSS_HAVE_BOOT
819 bool "Have DSPxxx.LD firmware file"
820 depends on SOUND_PSS && !STANDALONE
821 help
822 If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y
823 to include this file. Without this file the synth device (OPL) may
824 not work.
825
826config PSS_BOOT_FILE
827 string "Full pathname of DSPxxx.LD firmware file"
828 depends on PSS_HAVE_BOOT
829 default "/etc/sound/dsp001.ld"
830 help
831 Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,
832 starting from /.
833
834config SOUND_SB
835 tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
836 depends on SOUND_OSS
837 ---help---
838 Answer Y if you have an original Sound Blaster card made by Creative
839 Labs or a 100% hardware compatible clone (like the Thunderboard or
840 SM Games). For an unknown card you may answer Y if the card claims
841 to be Sound Blaster-compatible.
842
843 Please read the file <file:Documentation/sound/oss/Soundblaster>.
844
845 You should also say Y here for cards based on the Avance Logic
846 ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
847 for cards based on ESS chips (read
848 <file:Documentation/sound/oss/ESS1868> and
849 <file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE
850 64, say Y here and also to "AWE32 synth" below and read
851 <file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave
852 card, say Y here and read <file:Documentation/sound/oss/mwave>.
853
854 If you compile the driver into the kernel and don't want to use
855 isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
856 command line.
857
858 You can say M here to compile this driver as a module; the module is
859 called sb.
860
861config SOUND_AWE32_SYNTH
862 tristate "AWE32 synth"
863 depends on SOUND_OSS
864 help
865 Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
866 similar sound card. See <file:Documentation/sound/oss/README.awe>,
867 <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
868 mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
869 for more info.
870
871config SOUND_WAVEFRONT
872 tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
873 depends on SOUND_OSS && m
874 help
875 Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
876 and read the files <file:Documentation/sound/oss/Wavefront> and
877 <file:Documentation/sound/oss/Tropez+>.
878
879config SOUND_MAUI
880 tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
881 depends on SOUND_OSS
882 help
883 Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
884 sound card.
885
886 If you compile the driver into the kernel, you have to add
887 "maui=<io>,<irq>" to the kernel command line.
888
889config MAUI_HAVE_BOOT
890 bool "Have OSWF.MOT firmware file"
891 depends on SOUND_MAUI=y && !STANDALONE
892 help
893 Turtle Beach Maui and Tropez sound cards have a microcontroller
894 which needs to be initialized prior to use. OSWF.MOT is a file
895 distributed with the card's DOS/Windows drivers. Answer Y if you
896 have this file.
897
898config MAUI_BOOT_FILE
899 string "Full pathname of OSWF.MOT firmware file"
900 depends on MAUI_HAVE_BOOT
901 default "/etc/sound/oswf.mot"
902 help
903 Enter the full pathname of your OSWF.MOT file, starting from /.
904
905config SOUND_YM3812
906 tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
907 depends on SOUND_OSS
908 ---help---
909 Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
910 Answering Y is usually a safe and recommended choice, however some
911 cards may have software (TSR) FM emulation. Enabling FM support with
912 these cards may cause trouble (I don't currently know of any such
913 cards, however). Please read the file
914 <file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip.
915
916 If you compile the driver into the kernel, you have to add
917 "opl3=<io>" to the kernel command line.
918
919 If unsure, say Y.
920
921config SOUND_OPL3SA1
922 tristate "Yamaha OPL3-SA1 audio controller"
923 depends on SOUND_OSS
924 help
925 Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
926 usually built into motherboards. Read
927 <file:Documentation/sound/oss/OPL3-SA> for details.
928
929 If you compile the driver into the kernel, you have to add
930 "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
931 command line.
932
933config SOUND_OPL3SA2
934 tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
935 depends on SOUND_OSS
936 help
937 Say Y or M if you have a card based on one of these Yamaha sound
938 chipsets or the "SAx", which is actually a SA3. Read
939 <file:Documentation/sound/oss/OPL3-SA2> for more information on
940 configuring these cards.
941
942 If you compile the driver into the kernel and do not also
943 configure in the optional ISA PnP support, you will have to add
944 "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
945 command line.
946
947config SOUND_YMFPCI
948 tristate "Yamaha YMF7xx PCI audio (native mode)"
949 depends on SOUND_OSS && PCI
950 help
951 Support for Yamaha cards including the YMF711, YMF715, YMF718,
952 YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
953
954config SOUND_YMFPCI_LEGACY
955 bool "Yamaha PCI legacy ports support"
956 depends on SOUND_YMFPCI
957 help
958 Support for YMF7xx PCI cards emulating an MP401.
959
960config SOUND_UART6850
961 tristate "6850 UART support"
962 depends on SOUND_OSS
963 help
964 This option enables support for MIDI interfaces based on the 6850
965 UART chip. This interface is rarely found on sound cards. It's safe
966 to answer N to this question.
967
968 If you compile the driver into the kernel, you have to add
969 "uart6850=<io>,<irq>" to the kernel command line.
970
971config SOUND_AEDSP16
972 tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)"
973 depends on SOUND_OSS
974 ---help---
975 Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
976 driver supports Audio Excel DSP 16 but not the III nor PnP versions
977 of this card.
978
979 The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or
980 a Microsoft Sound System card, so you should have said Y to either
981 "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
982 or "Microsoft Sound System support", above, and you need to answer
983 the "MSS emulation" and "SBPro emulation" questions below
984 accordingly. You should say Y to one and only one of these two
985 questions.
986
987 Read the <file:Documentation/sound/oss/README.OSS> file and the head of
988 <file:drivers/sound/aedsp16.c> as well as
989 <file:Documentation/sound/oss/AudioExcelDSP16> to get more information
990 about this driver and its configuration.
991
992config SC6600
993 bool "SC-6600 based audio cards (new Audio Excel DSP 16)"
994 depends on SOUND_AEDSP16
995 help
996 The SC6600 is the new version of DSP mounted on the Audio Excel DSP
997 16 cards. Find in the manual the FCC ID of your audio card and
998 answer Y if you have an SC6600 DSP.
999
1000config SC6600_JOY
1001 bool "Activate SC-6600 Joystick Interface"
1002 depends on SC6600
1003 help
1004 Say Y here in order to use the joystick interface of the Audio Excel
1005 DSP 16 card.
1006
1007config SC6600_CDROM
1008 int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)"
1009 depends on SC6600
1010 default "4"
1011 help
1012 This is used to activate the CD-ROM interface of the Audio Excel
1013 DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no
1014 CD-ROM present.
1015
1016config SC6600_CDROMBASE
1017 hex "SC-6600 CDROM Interface I/O Address"
1018 depends on SC6600
1019 default "0"
1020 help
1021 Base I/O port address for the CD-ROM interface of the Audio Excel
1022 DSP 16 card.
1023
1024choice
1025 prompt "Audio Excel DSP 16"
1026 optional
1027 depends on SOUND_AEDSP16
1028
1029config AEDSP16_MSS
1030 bool "MSS emulation"
1031 depends on SOUND_MSS
1032 help
1033 Answer Y if you want your audio card to emulate Microsoft Sound
1034 System. You should then say Y to "Microsoft Sound System support"
1035 and say N to "Audio Excel DSP 16 (SBPro emulation)".
1036
1037config AEDSP16_SBPRO
1038 bool "SBPro emulation"
1039 depends on SOUND_SB
1040 help
1041 Answer Y if you want your audio card to emulate Sound Blaster Pro.
1042 You should then say Y to "100% Sound Blaster compatibles
1043 (SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS
1044 emulation)".
1045
1046 If you compile the driver into the kernel, you have to add
1047 "aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel
1048 command line.
1049
1050endchoice
1051
1052config AEDSP16_MPU401
1053 bool "Audio Excel DSP 16 (MPU401 emulation)"
1054 depends on SOUND_AEDSP16 && SOUND_MPU401
1055 help
1056 Answer Y if you want your audio card to emulate the MPU-401 midi
1057 interface. You should then also say Y to "MPU-401 support".
1058
1059 Note that the I/O base for MPU-401 support of aedsp16 is the same
1060 you have selected for "MPU-401 support". If you are using this
1061 driver as a module you have to specify the MPU I/O base address with
1062 the parameter 'mpu_base=0xNNN'.
1063
1064config SOUND_VIDC
1065 tristate "VIDC 16-bit sound"
1066 depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS
1067 help
1068 16-bit support for the VIDC onboard sound hardware found on Acorn
1069 machines.
1070
1071config SOUND_WAVEARTIST
1072 tristate "Netwinder WaveArtist"
1073 depends on ARM && SOUND_OSS && ARCH_NETWINDER
1074 help
1075 Say Y here to include support for the Rockwell WaveArtist sound
1076 system. This driver is mainly for the NetWinder.
1077
1078config SOUND_TVMIXER
1079 tristate "TV card (bt848) mixer support"
1080 depends on SOUND_PRIME!=n && SOUND && I2C
1081 help
1082 Support for audio mixer facilities on the BT848 TV frame-grabber
1083 card.
1084
1085config SOUND_KAHLUA
1086 tristate "XpressAudio Sound Blaster emulation"
1087 depends on SOUND_SB
1088
1089config SOUND_ALI5455
1090 tristate "ALi5455 audio support"
1091 depends on SOUND_PRIME!=n && PCI
1092
1093config SOUND_FORTE
1094 tristate "ForteMedia FM801 driver"
1095 depends on SOUND_PRIME!=n && PCI
1096 help
1097 Say Y or M if you want driver support for the ForteMedia FM801 PCI
1098 audio controller (Abit AU10, Genius Sound Maker, HP Workstation
1099 zx2000, and others).
1100
1101config SOUND_RME96XX
1102 tristate "RME Hammerfall (RME96XX) support"
1103 depends on SOUND_PRIME!=n && PCI
1104 help
1105 Say Y or M if you have a Hammerfall or Hammerfall light
1106 multichannel card from RME. If you want to access advanced
1107 features of the card, read <file:Documentation/sound/oss/rme96xx>.
1108
1109config SOUND_AD1980
1110 tristate "AD1980 front/back switch plugin"
1111 depends on SOUND_PRIME!=n
1112
1113config SOUND_SH_DAC_AUDIO
1114 tristate "SuperH DAC audio support"
1115 depends on SOUND_PRIME!=n && SOUND && CPU_SH3
1116
1117config SOUND_SH_DAC_AUDIO_CHANNEL
1118 int " DAC channel"
1119 default "1"
1120 depends on SOUND_SH_DAC_AUDIO
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-28 10:07:15 -0500