1 files changed, 187 insertions, 0 deletions

diff --git a/sound/aoa/soundbus/i2sbus/i2sbus-interface.h b/sound/aoa/soundbus/i2sbus/i2sbus-interface.h
new file mode 100644
index 000000000000..c6b5f5452d20
--- /dev/null
+++ b/sound/aoa/soundbus/i2sbus/i2sbus-interface.h
@@ -0,0 +1,187 @@
+/*
+ * i2sbus driver -- interface register definitions
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPL v2, can be found in COPYING.
+ */
+#ifndef __I2SBUS_INTERFACE_H
+#define __I2SBUS_INTERFACE_H
+
+/* i2s bus control registers, at least what we know about them */
+
+#define __PAD(m,n) u8 __pad##m[n]
+#define _PAD(line, n) __PAD(line, n)
+#define PAD(n) _PAD(__LINE__, (n))
+struct i2s_interface_regs {
+        __le32 intr_ctl;        /* 0x00 */
+        PAD(12);
+        __le32 serial_format;   /* 0x10 */
+        PAD(12);
+        __le32 codec_msg_out;   /* 0x20 */
+        PAD(12);
+        __le32 codec_msg_in;    /* 0x30 */
+        PAD(12);
+        __le32 frame_count;     /* 0x40 */
+        PAD(12);
+        __le32 frame_match;     /* 0x50 */
+        PAD(12);
+        __le32 data_word_sizes; /* 0x60 */
+        PAD(12);
+        __le32 peak_level_sel;  /* 0x70 */
+        PAD(12);
+        __le32 peak_level_in0;  /* 0x80 */
+        PAD(12);
+        __le32 peak_level_in1;  /* 0x90 */
+        PAD(12);
+        /* total size: 0x100 bytes */
+}  __attribute__((__packed__));
+
+/* interrupt register is just a bitfield with
+ * interrupt enable and pending bits */
+#define I2S_REG_INTR_CTL                0x00
+#       define I2S_INT_FRAME_COUNT              (1<<31)
+#       define I2S_PENDING_FRAME_COUNT          (1<<30)
+#       define I2S_INT_MESSAGE_FLAG             (1<<29)
+#       define I2S_PENDING_MESSAGE_FLAG         (1<<28)
+#       define I2S_INT_NEW_PEAK                 (1<<27)
+#       define I2S_PENDING_NEW_PEAK             (1<<26)
+#       define I2S_INT_CLOCKS_STOPPED           (1<<25)
+#       define I2S_PENDING_CLOCKS_STOPPED       (1<<24)
+#       define I2S_INT_EXTERNAL_SYNC_ERROR      (1<<23)
+#       define I2S_PENDING_EXTERNAL_SYNC_ERROR  (1<<22)
+#       define I2S_INT_EXTERNAL_SYNC_OK         (1<<21)
+#       define I2S_PENDING_EXTERNAL_SYNC_OK     (1<<20)
+#       define I2S_INT_NEW_SAMPLE_RATE          (1<<19)
+#       define I2S_PENDING_NEW_SAMPLE_RATE      (1<<18)
+#       define I2S_INT_STATUS_FLAG              (1<<17)
+#       define I2S_PENDING_STATUS_FLAG          (1<<16)
+
+/* serial format register is more interesting :)
+ * It contains:
+ *  - clock source
+ *  - MClk divisor
+ *  - SClk divisor
+ *  - SClk master flag
+ *  - serial format (sony, i2s 64x, i2s 32x, dav, silabs)
+ *  - external sample frequency interrupt (don't understand)
+ *  - external sample frequency
+ */
+#define I2S_REG_SERIAL_FORMAT           0x10
+/* clock source. You get either 18.432, 45.1584 or 49.1520 MHz */
+#       define I2S_SF_CLOCK_SOURCE_SHIFT        30
+#       define I2S_SF_CLOCK_SOURCE_MASK         (3<<I2S_SF_CLOCK_SOURCE_SHIFT)
+#       define I2S_SF_CLOCK_SOURCE_18MHz        (0<<I2S_SF_CLOCK_SOURCE_SHIFT)
+#       define I2S_SF_CLOCK_SOURCE_45MHz        (1<<I2S_SF_CLOCK_SOURCE_SHIFT)
+#       define I2S_SF_CLOCK_SOURCE_49MHz        (2<<I2S_SF_CLOCK_SOURCE_SHIFT)
+/* also, let's define the exact clock speeds here, in Hz */
+#define I2S_CLOCK_SPEED_18MHz   18432000
+#define I2S_CLOCK_SPEED_45MHz   45158400
+#define I2S_CLOCK_SPEED_49MHz   49152000
+/* MClk is the clock that drives the codec, usually called its 'system clock'.
+ * It is derived by taking only every 'divisor' tick of the clock.
+ */
+#       define I2S_SF_MCLKDIV_SHIFT             24
+#       define I2S_SF_MCLKDIV_MASK              (0x1F<<I2S_SF_MCLKDIV_SHIFT)
+#       define I2S_SF_MCLKDIV_1                 (0x14<<I2S_SF_MCLKDIV_SHIFT)
+#       define I2S_SF_MCLKDIV_3                 (0x13<<I2S_SF_MCLKDIV_SHIFT)
+#       define I2S_SF_MCLKDIV_5                 (0x12<<I2S_SF_MCLKDIV_SHIFT)
+#       define I2S_SF_MCLKDIV_14                (0x0E<<I2S_SF_MCLKDIV_SHIFT)
+#       define I2S_SF_MCLKDIV_OTHER(div)        (((div/2-1)<<I2S_SF_MCLKDIV_SHIFT)&I2S_SF_MCLKDIV_MASK)
+static inline int i2s_sf_mclkdiv(int div, int *out)
+{
+        int d;
+
+        switch(div) {
+        case 1: *out |= I2S_SF_MCLKDIV_1; return 0;
+        case 3: *out |= I2S_SF_MCLKDIV_3; return 0;
+        case 5: *out |= I2S_SF_MCLKDIV_5; return 0;
+        case 14: *out |= I2S_SF_MCLKDIV_14; return 0;
+        default:
+                if (div%2) return -1;
+                d = div/2-1;
+                if (d == 0x14 || d == 0x13 || d == 0x12 || d == 0x0E)
+                        return -1;
+                *out |= I2S_SF_MCLKDIV_OTHER(div);
+                return 0;
+        }
+}
+/* SClk is the clock that drives the i2s wire bus. Note that it is
+ * derived from the MClk above by taking only every 'divisor' tick
+ * of MClk.
+ */
+#       define I2S_SF_SCLKDIV_SHIFT             20
+#       define I2S_SF_SCLKDIV_MASK              (0xF<<I2S_SF_SCLKDIV_SHIFT)
+#       define I2S_SF_SCLKDIV_1                 (8<<I2S_SF_SCLKDIV_SHIFT)
+#       define I2S_SF_SCLKDIV_3                 (9<<I2S_SF_SCLKDIV_SHIFT)
+#       define I2S_SF_SCLKDIV_OTHER(div)        (((div/2-1)<<I2S_SF_SCLKDIV_SHIFT)&I2S_SF_SCLKDIV_MASK)
+static inline int i2s_sf_sclkdiv(int div, int *out)
+{
+        int d;
+
+        switch(div) {
+        case 1: *out |= I2S_SF_SCLKDIV_1; return 0;
+        case 3: *out |= I2S_SF_SCLKDIV_3; return 0;
+        default:
+                if (div%2) return -1;
+                d = div/2-1;
+                if (d == 8 || d == 9) return -1;
+                *out |= I2S_SF_SCLKDIV_OTHER(div);
+                return 0;
+        }
+}
+#       define I2S_SF_SCLK_MASTER               (1<<19)
+/* serial format is the way the data is put to the i2s wire bus */
+#       define I2S_SF_SERIAL_FORMAT_SHIFT       16
+#       define I2S_SF_SERIAL_FORMAT_MASK        (7<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#       define I2S_SF_SERIAL_FORMAT_SONY        (0<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#       define I2S_SF_SERIAL_FORMAT_I2S_64X     (1<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#       define I2S_SF_SERIAL_FORMAT_I2S_32X     (2<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#       define I2S_SF_SERIAL_FORMAT_I2S_DAV     (4<<I2S_SF_SERIAL_FORMAT_SHIFT)
+#       define I2S_SF_SERIAL_FORMAT_I2S_SILABS  (5<<I2S_SF_SERIAL_FORMAT_SHIFT)
+/* unknown */
+#       define I2S_SF_EXT_SAMPLE_FREQ_INT_SHIFT 12
+#       define I2S_SF_EXT_SAMPLE_FREQ_INT_MASK  (0xF<<I2S_SF_SAMPLE_FREQ_INT_SHIFT)
+/* probably gives external frequency? */
+#       define I2S_SF_EXT_SAMPLE_FREQ_MASK      0xFFF
+
+/* used to send codec messages, but how isn't clear */
+#define I2S_REG_CODEC_MSG_OUT           0x20
+
+/* used to receive codec messages, but how isn't clear */
+#define I2S_REG_CODEC_MSG_IN            0x30
+
+/* frame count reg isn't clear to me yet, but probably useful */
+#define I2S_REG_FRAME_COUNT             0x40
+
+/* program to some value, and get interrupt if frame count reaches it */
+#define I2S_REG_FRAME_MATCH             0x50
+
+/* this register describes how the bus transfers data */
+#define I2S_REG_DATA_WORD_SIZES         0x60
+/* number of interleaved input channels */
+#       define I2S_DWS_NUM_CHANNELS_IN_SHIFT    24
+#       define I2S_DWS_NUM_CHANNELS_IN_MASK     (0x1F<<I2S_DWS_NUM_CHANNELS_IN_SHIFT)
+/* word size of input data */
+#       define I2S_DWS_DATA_IN_SIZE_SHIFT       16
+#       define I2S_DWS_DATA_IN_16BIT            (0<<I2S_DWS_DATA_IN_SIZE_SHIFT)
+#       define I2S_DWS_DATA_IN_24BIT            (3<<I2S_DWS_DATA_IN_SIZE_SHIFT)
+/* number of interleaved output channels */
+#       define I2S_DWS_NUM_CHANNELS_OUT_SHIFT   8
+#       define I2S_DWS_NUM_CHANNELS_OUT_MASK    (0x1F<<I2S_DWS_NUM_CHANNELS_OUT_SHIFT)
+/* word size of output data */
+#       define I2S_DWS_DATA_OUT_SIZE_SHIFT      0
+#       define I2S_DWS_DATA_OUT_16BIT           (0<<I2S_DWS_DATA_OUT_SIZE_SHIFT)
+#       define I2S_DWS_DATA_OUT_24BIT           (3<<I2S_DWS_DATA_OUT_SIZE_SHIFT)
+
+
+/* unknown */
+#define I2S_REG_PEAK_LEVEL_SEL          0x70
+
+/* unknown */
+#define I2S_REG_PEAK_LEVEL_IN0          0x80
+
+/* unknown */
+#define I2S_REG_PEAK_LEVEL_IN1          0x90
+
+#endif /* __I2SBUS_INTERFACE_H */