diff options
Diffstat (limited to 'net')
-rw-r--r-- | net/can/Kconfig | 13 | ||||
-rw-r--r-- | net/can/Makefile | 3 | ||||
-rw-r--r-- | net/can/bcm.c | 1561 |
3 files changed, 1577 insertions, 0 deletions
diff --git a/net/can/Kconfig b/net/can/Kconfig index 4718d1f50ab3..182b96b80ebc 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig | |||
@@ -26,3 +26,16 @@ config CAN_RAW | |||
26 | most cases where no higher level protocol is being used. The raw | 26 | most cases where no higher level protocol is being used. The raw |
27 | socket has several filter options e.g. ID masking / error frames. | 27 | socket has several filter options e.g. ID masking / error frames. |
28 | To receive/send raw CAN messages, use AF_CAN with protocol CAN_RAW. | 28 | To receive/send raw CAN messages, use AF_CAN with protocol CAN_RAW. |
29 | |||
30 | config CAN_BCM | ||
31 | tristate "Broadcast Manager CAN Protocol (with content filtering)" | ||
32 | depends on CAN | ||
33 | default N | ||
34 | ---help--- | ||
35 | The Broadcast Manager offers content filtering, timeout monitoring, | ||
36 | sending of RTR frames, and cyclic CAN messages without permanent user | ||
37 | interaction. The BCM can be 'programmed' via the BSD socket API and | ||
38 | informs you on demand e.g. only on content updates / timeouts. | ||
39 | You probably want to use the bcm socket in most cases where cyclic | ||
40 | CAN messages are used on the bus (e.g. in automotive environments). | ||
41 | To use the Broadcast Manager, use AF_CAN with protocol CAN_BCM. | ||
diff --git a/net/can/Makefile b/net/can/Makefile index 86f1cf21fce4..9cd3c4b3abda 100644 --- a/net/can/Makefile +++ b/net/can/Makefile | |||
@@ -7,3 +7,6 @@ can-objs := af_can.o proc.o | |||
7 | 7 | ||
8 | obj-$(CONFIG_CAN_RAW) += can-raw.o | 8 | obj-$(CONFIG_CAN_RAW) += can-raw.o |
9 | can-raw-objs := raw.o | 9 | can-raw-objs := raw.o |
10 | |||
11 | obj-$(CONFIG_CAN_BCM) += can-bcm.o | ||
12 | can-bcm-objs := bcm.o | ||
diff --git a/net/can/bcm.c b/net/can/bcm.c new file mode 100644 index 000000000000..bd4282dae754 --- /dev/null +++ b/net/can/bcm.c | |||
@@ -0,0 +1,1561 @@ | |||
1 | /* | ||
2 | * bcm.c - Broadcast Manager to filter/send (cyclic) CAN content | ||
3 | * | ||
4 | * Copyright (c) 2002-2007 Volkswagen Group Electronic Research | ||
5 | * All rights reserved. | ||
6 | * | ||
7 | * Redistribution and use in source and binary forms, with or without | ||
8 | * modification, are permitted provided that the following conditions | ||
9 | * are met: | ||
10 | * 1. Redistributions of source code must retain the above copyright | ||
11 | * notice, this list of conditions and the following disclaimer. | ||
12 | * 2. Redistributions in binary form must reproduce the above copyright | ||
13 | * notice, this list of conditions and the following disclaimer in the | ||
14 | * documentation and/or other materials provided with the distribution. | ||
15 | * 3. Neither the name of Volkswagen nor the names of its contributors | ||
16 | * may be used to endorse or promote products derived from this software | ||
17 | * without specific prior written permission. | ||
18 | * | ||
19 | * Alternatively, provided that this notice is retained in full, this | ||
20 | * software may be distributed under the terms of the GNU General | ||
21 | * Public License ("GPL") version 2, in which case the provisions of the | ||
22 | * GPL apply INSTEAD OF those given above. | ||
23 | * | ||
24 | * The provided data structures and external interfaces from this code | ||
25 | * are not restricted to be used by modules with a GPL compatible license. | ||
26 | * | ||
27 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | ||
28 | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | ||
29 | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | ||
30 | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | ||
31 | * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | ||
32 | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | ||
33 | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | ||
34 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | ||
35 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | ||
36 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | ||
37 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH | ||
38 | * DAMAGE. | ||
39 | * | ||
40 | * Send feedback to <socketcan-users@lists.berlios.de> | ||
41 | * | ||
42 | */ | ||
43 | |||
44 | #include <linux/module.h> | ||
45 | #include <linux/init.h> | ||
46 | #include <linux/list.h> | ||
47 | #include <linux/proc_fs.h> | ||
48 | #include <linux/uio.h> | ||
49 | #include <linux/net.h> | ||
50 | #include <linux/netdevice.h> | ||
51 | #include <linux/socket.h> | ||
52 | #include <linux/if_arp.h> | ||
53 | #include <linux/skbuff.h> | ||
54 | #include <linux/can.h> | ||
55 | #include <linux/can/core.h> | ||
56 | #include <linux/can/bcm.h> | ||
57 | #include <net/sock.h> | ||
58 | #include <net/net_namespace.h> | ||
59 | |||
60 | /* use of last_frames[index].can_dlc */ | ||
61 | #define RX_RECV 0x40 /* received data for this element */ | ||
62 | #define RX_THR 0x80 /* element not been sent due to throttle feature */ | ||
63 | #define BCM_CAN_DLC_MASK 0x0F /* clean private flags in can_dlc by masking */ | ||
64 | |||
65 | /* get best masking value for can_rx_register() for a given single can_id */ | ||
66 | #define REGMASK(id) ((id & CAN_RTR_FLAG) | ((id & CAN_EFF_FLAG) ? \ | ||
67 | (CAN_EFF_MASK | CAN_EFF_FLAG) : CAN_SFF_MASK)) | ||
68 | |||
69 | #define CAN_BCM_VERSION CAN_VERSION | ||
70 | static __initdata const char banner[] = KERN_INFO | ||
71 | "can: broadcast manager protocol (rev " CAN_BCM_VERSION ")\n"; | ||
72 | |||
73 | MODULE_DESCRIPTION("PF_CAN broadcast manager protocol"); | ||
74 | MODULE_LICENSE("Dual BSD/GPL"); | ||
75 | MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>"); | ||
76 | |||
77 | /* easy access to can_frame payload */ | ||
78 | static inline u64 GET_U64(const struct can_frame *cp) | ||
79 | { | ||
80 | return *(u64 *)cp->data; | ||
81 | } | ||
82 | |||
83 | struct bcm_op { | ||
84 | struct list_head list; | ||
85 | int ifindex; | ||
86 | canid_t can_id; | ||
87 | int flags; | ||
88 | unsigned long j_ival1, j_ival2, j_lastmsg; | ||
89 | unsigned long frames_abs, frames_filtered; | ||
90 | struct timer_list timer, thrtimer; | ||
91 | struct timeval ival1, ival2; | ||
92 | ktime_t rx_stamp; | ||
93 | int rx_ifindex; | ||
94 | int count; | ||
95 | int nframes; | ||
96 | int currframe; | ||
97 | struct can_frame *frames; | ||
98 | struct can_frame *last_frames; | ||
99 | struct can_frame sframe; | ||
100 | struct can_frame last_sframe; | ||
101 | struct sock *sk; | ||
102 | struct net_device *rx_reg_dev; | ||
103 | }; | ||
104 | |||
105 | static struct proc_dir_entry *proc_dir; | ||
106 | |||
107 | struct bcm_sock { | ||
108 | struct sock sk; | ||
109 | int bound; | ||
110 | int ifindex; | ||
111 | struct notifier_block notifier; | ||
112 | struct list_head rx_ops; | ||
113 | struct list_head tx_ops; | ||
114 | unsigned long dropped_usr_msgs; | ||
115 | struct proc_dir_entry *bcm_proc_read; | ||
116 | char procname [9]; /* pointer printed in ASCII with \0 */ | ||
117 | }; | ||
118 | |||
119 | static inline struct bcm_sock *bcm_sk(const struct sock *sk) | ||
120 | { | ||
121 | return (struct bcm_sock *)sk; | ||
122 | } | ||
123 | |||
124 | #define CFSIZ sizeof(struct can_frame) | ||
125 | #define OPSIZ sizeof(struct bcm_op) | ||
126 | #define MHSIZ sizeof(struct bcm_msg_head) | ||
127 | |||
128 | /* | ||
129 | * rounded_tv2jif - calculate jiffies from timeval including optional up | ||
130 | * @tv: pointer to timeval | ||
131 | * | ||
132 | * Description: | ||
133 | * Unlike timeval_to_jiffies() provided in include/linux/jiffies.h, this | ||
134 | * function is intentionally more relaxed on precise timer ticks to get | ||
135 | * exact one jiffy for requested 1000us on a 1000HZ machine. | ||
136 | * This code is to be removed when upgrading to kernel hrtimer. | ||
137 | * | ||
138 | * Return: | ||
139 | * calculated jiffies (max: ULONG_MAX) | ||
140 | */ | ||
141 | static unsigned long rounded_tv2jif(const struct timeval *tv) | ||
142 | { | ||
143 | unsigned long sec = tv->tv_sec; | ||
144 | unsigned long usec = tv->tv_usec; | ||
145 | unsigned long jif; | ||
146 | |||
147 | if (sec > ULONG_MAX / HZ) | ||
148 | return ULONG_MAX; | ||
149 | |||
150 | /* round up to get at least the requested time */ | ||
151 | usec += 1000000 / HZ - 1; | ||
152 | |||
153 | jif = usec / (1000000 / HZ); | ||
154 | |||
155 | if (sec * HZ > ULONG_MAX - jif) | ||
156 | return ULONG_MAX; | ||
157 | |||
158 | return jif + sec * HZ; | ||
159 | } | ||
160 | |||
161 | /* | ||
162 | * procfs functions | ||
163 | */ | ||
164 | static char *bcm_proc_getifname(int ifindex) | ||
165 | { | ||
166 | struct net_device *dev; | ||
167 | |||
168 | if (!ifindex) | ||
169 | return "any"; | ||
170 | |||
171 | /* no usage counting */ | ||
172 | dev = __dev_get_by_index(&init_net, ifindex); | ||
173 | if (dev) | ||
174 | return dev->name; | ||
175 | |||
176 | return "???"; | ||
177 | } | ||
178 | |||
179 | static int bcm_read_proc(char *page, char **start, off_t off, | ||
180 | int count, int *eof, void *data) | ||
181 | { | ||
182 | int len = 0; | ||
183 | struct sock *sk = (struct sock *)data; | ||
184 | struct bcm_sock *bo = bcm_sk(sk); | ||
185 | struct bcm_op *op; | ||
186 | |||
187 | len += snprintf(page + len, PAGE_SIZE - len, ">>> socket %p", | ||
188 | sk->sk_socket); | ||
189 | len += snprintf(page + len, PAGE_SIZE - len, " / sk %p", sk); | ||
190 | len += snprintf(page + len, PAGE_SIZE - len, " / bo %p", bo); | ||
191 | len += snprintf(page + len, PAGE_SIZE - len, " / dropped %lu", | ||
192 | bo->dropped_usr_msgs); | ||
193 | len += snprintf(page + len, PAGE_SIZE - len, " / bound %s", | ||
194 | bcm_proc_getifname(bo->ifindex)); | ||
195 | len += snprintf(page + len, PAGE_SIZE - len, " <<<\n"); | ||
196 | |||
197 | list_for_each_entry(op, &bo->rx_ops, list) { | ||
198 | |||
199 | unsigned long reduction; | ||
200 | |||
201 | /* print only active entries & prevent division by zero */ | ||
202 | if (!op->frames_abs) | ||
203 | continue; | ||
204 | |||
205 | len += snprintf(page + len, PAGE_SIZE - len, | ||
206 | "rx_op: %03X %-5s ", | ||
207 | op->can_id, bcm_proc_getifname(op->ifindex)); | ||
208 | len += snprintf(page + len, PAGE_SIZE - len, "[%d]%c ", | ||
209 | op->nframes, | ||
210 | (op->flags & RX_CHECK_DLC)?'d':' '); | ||
211 | if (op->j_ival1) | ||
212 | len += snprintf(page + len, PAGE_SIZE - len, | ||
213 | "timeo=%ld ", op->j_ival1); | ||
214 | |||
215 | if (op->j_ival2) | ||
216 | len += snprintf(page + len, PAGE_SIZE - len, | ||
217 | "thr=%ld ", op->j_ival2); | ||
218 | |||
219 | len += snprintf(page + len, PAGE_SIZE - len, | ||
220 | "# recv %ld (%ld) => reduction: ", | ||
221 | op->frames_filtered, op->frames_abs); | ||
222 | |||
223 | reduction = 100 - (op->frames_filtered * 100) / op->frames_abs; | ||
224 | |||
225 | len += snprintf(page + len, PAGE_SIZE - len, "%s%ld%%\n", | ||
226 | (reduction == 100)?"near ":"", reduction); | ||
227 | |||
228 | if (len > PAGE_SIZE - 200) { | ||
229 | /* mark output cut off */ | ||
230 | len += snprintf(page + len, PAGE_SIZE - len, "(..)\n"); | ||
231 | break; | ||
232 | } | ||
233 | } | ||
234 | |||
235 | list_for_each_entry(op, &bo->tx_ops, list) { | ||
236 | |||
237 | len += snprintf(page + len, PAGE_SIZE - len, | ||
238 | "tx_op: %03X %s [%d] ", | ||
239 | op->can_id, bcm_proc_getifname(op->ifindex), | ||
240 | op->nframes); | ||
241 | if (op->j_ival1) | ||
242 | len += snprintf(page + len, PAGE_SIZE - len, "t1=%ld ", | ||
243 | op->j_ival1); | ||
244 | |||
245 | if (op->j_ival2) | ||
246 | len += snprintf(page + len, PAGE_SIZE - len, "t2=%ld ", | ||
247 | op->j_ival2); | ||
248 | |||
249 | len += snprintf(page + len, PAGE_SIZE - len, "# sent %ld\n", | ||
250 | op->frames_abs); | ||
251 | |||
252 | if (len > PAGE_SIZE - 100) { | ||
253 | /* mark output cut off */ | ||
254 | len += snprintf(page + len, PAGE_SIZE - len, "(..)\n"); | ||
255 | break; | ||
256 | } | ||
257 | } | ||
258 | |||
259 | len += snprintf(page + len, PAGE_SIZE - len, "\n"); | ||
260 | |||
261 | *eof = 1; | ||
262 | return len; | ||
263 | } | ||
264 | |||
265 | /* | ||
266 | * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface | ||
267 | * of the given bcm tx op | ||
268 | */ | ||
269 | static void bcm_can_tx(struct bcm_op *op) | ||
270 | { | ||
271 | struct sk_buff *skb; | ||
272 | struct net_device *dev; | ||
273 | struct can_frame *cf = &op->frames[op->currframe]; | ||
274 | |||
275 | /* no target device? => exit */ | ||
276 | if (!op->ifindex) | ||
277 | return; | ||
278 | |||
279 | dev = dev_get_by_index(&init_net, op->ifindex); | ||
280 | if (!dev) { | ||
281 | /* RFC: should this bcm_op remove itself here? */ | ||
282 | return; | ||
283 | } | ||
284 | |||
285 | skb = alloc_skb(CFSIZ, gfp_any()); | ||
286 | if (!skb) | ||
287 | goto out; | ||
288 | |||
289 | memcpy(skb_put(skb, CFSIZ), cf, CFSIZ); | ||
290 | |||
291 | /* send with loopback */ | ||
292 | skb->dev = dev; | ||
293 | skb->sk = op->sk; | ||
294 | can_send(skb, 1); | ||
295 | |||
296 | /* update statistics */ | ||
297 | op->currframe++; | ||
298 | op->frames_abs++; | ||
299 | |||
300 | /* reached last frame? */ | ||
301 | if (op->currframe >= op->nframes) | ||
302 | op->currframe = 0; | ||
303 | out: | ||
304 | dev_put(dev); | ||
305 | } | ||
306 | |||
307 | /* | ||
308 | * bcm_send_to_user - send a BCM message to the userspace | ||
309 | * (consisting of bcm_msg_head + x CAN frames) | ||
310 | */ | ||
311 | static void bcm_send_to_user(struct bcm_op *op, struct bcm_msg_head *head, | ||
312 | struct can_frame *frames, int has_timestamp) | ||
313 | { | ||
314 | struct sk_buff *skb; | ||
315 | struct can_frame *firstframe; | ||
316 | struct sockaddr_can *addr; | ||
317 | struct sock *sk = op->sk; | ||
318 | int datalen = head->nframes * CFSIZ; | ||
319 | int err; | ||
320 | |||
321 | skb = alloc_skb(sizeof(*head) + datalen, gfp_any()); | ||
322 | if (!skb) | ||
323 | return; | ||
324 | |||
325 | memcpy(skb_put(skb, sizeof(*head)), head, sizeof(*head)); | ||
326 | |||
327 | if (head->nframes) { | ||
328 | /* can_frames starting here */ | ||
329 | firstframe = (struct can_frame *) skb_tail_pointer(skb); | ||
330 | |||
331 | memcpy(skb_put(skb, datalen), frames, datalen); | ||
332 | |||
333 | /* | ||
334 | * the BCM uses the can_dlc-element of the can_frame | ||
335 | * structure for internal purposes. This is only | ||
336 | * relevant for updates that are generated by the | ||
337 | * BCM, where nframes is 1 | ||
338 | */ | ||
339 | if (head->nframes == 1) | ||
340 | firstframe->can_dlc &= BCM_CAN_DLC_MASK; | ||
341 | } | ||
342 | |||
343 | if (has_timestamp) { | ||
344 | /* restore rx timestamp */ | ||
345 | skb->tstamp = op->rx_stamp; | ||
346 | } | ||
347 | |||
348 | /* | ||
349 | * Put the datagram to the queue so that bcm_recvmsg() can | ||
350 | * get it from there. We need to pass the interface index to | ||
351 | * bcm_recvmsg(). We pass a whole struct sockaddr_can in skb->cb | ||
352 | * containing the interface index. | ||
353 | */ | ||
354 | |||
355 | BUILD_BUG_ON(sizeof(skb->cb) < sizeof(struct sockaddr_can)); | ||
356 | addr = (struct sockaddr_can *)skb->cb; | ||
357 | memset(addr, 0, sizeof(*addr)); | ||
358 | addr->can_family = AF_CAN; | ||
359 | addr->can_ifindex = op->rx_ifindex; | ||
360 | |||
361 | err = sock_queue_rcv_skb(sk, skb); | ||
362 | if (err < 0) { | ||
363 | struct bcm_sock *bo = bcm_sk(sk); | ||
364 | |||
365 | kfree_skb(skb); | ||
366 | /* don't care about overflows in this statistic */ | ||
367 | bo->dropped_usr_msgs++; | ||
368 | } | ||
369 | } | ||
370 | |||
371 | /* | ||
372 | * bcm_tx_timeout_handler - performes cyclic CAN frame transmissions | ||
373 | */ | ||
374 | static void bcm_tx_timeout_handler(unsigned long data) | ||
375 | { | ||
376 | struct bcm_op *op = (struct bcm_op *)data; | ||
377 | |||
378 | if (op->j_ival1 && (op->count > 0)) { | ||
379 | |||
380 | op->count--; | ||
381 | if (!op->count && (op->flags & TX_COUNTEVT)) { | ||
382 | struct bcm_msg_head msg_head; | ||
383 | |||
384 | /* create notification to user */ | ||
385 | msg_head.opcode = TX_EXPIRED; | ||
386 | msg_head.flags = op->flags; | ||
387 | msg_head.count = op->count; | ||
388 | msg_head.ival1 = op->ival1; | ||
389 | msg_head.ival2 = op->ival2; | ||
390 | msg_head.can_id = op->can_id; | ||
391 | msg_head.nframes = 0; | ||
392 | |||
393 | bcm_send_to_user(op, &msg_head, NULL, 0); | ||
394 | } | ||
395 | } | ||
396 | |||
397 | if (op->j_ival1 && (op->count > 0)) { | ||
398 | |||
399 | /* send (next) frame */ | ||
400 | bcm_can_tx(op); | ||
401 | mod_timer(&op->timer, jiffies + op->j_ival1); | ||
402 | |||
403 | } else { | ||
404 | if (op->j_ival2) { | ||
405 | |||
406 | /* send (next) frame */ | ||
407 | bcm_can_tx(op); | ||
408 | mod_timer(&op->timer, jiffies + op->j_ival2); | ||
409 | } | ||
410 | } | ||
411 | |||
412 | return; | ||
413 | } | ||
414 | |||
415 | /* | ||
416 | * bcm_rx_changed - create a RX_CHANGED notification due to changed content | ||
417 | */ | ||
418 | static void bcm_rx_changed(struct bcm_op *op, struct can_frame *data) | ||
419 | { | ||
420 | struct bcm_msg_head head; | ||
421 | |||
422 | op->j_lastmsg = jiffies; | ||
423 | |||
424 | /* update statistics */ | ||
425 | op->frames_filtered++; | ||
426 | |||
427 | /* prevent statistics overflow */ | ||
428 | if (op->frames_filtered > ULONG_MAX/100) | ||
429 | op->frames_filtered = op->frames_abs = 0; | ||
430 | |||
431 | head.opcode = RX_CHANGED; | ||
432 | head.flags = op->flags; | ||
433 | head.count = op->count; | ||
434 | head.ival1 = op->ival1; | ||
435 | head.ival2 = op->ival2; | ||
436 | head.can_id = op->can_id; | ||
437 | head.nframes = 1; | ||
438 | |||
439 | bcm_send_to_user(op, &head, data, 1); | ||
440 | } | ||
441 | |||
442 | /* | ||
443 | * bcm_rx_update_and_send - process a detected relevant receive content change | ||
444 | * 1. update the last received data | ||
445 | * 2. send a notification to the user (if possible) | ||
446 | */ | ||
447 | static void bcm_rx_update_and_send(struct bcm_op *op, | ||
448 | struct can_frame *lastdata, | ||
449 | struct can_frame *rxdata) | ||
450 | { | ||
451 | unsigned long nexttx = op->j_lastmsg + op->j_ival2; | ||
452 | |||
453 | memcpy(lastdata, rxdata, CFSIZ); | ||
454 | |||
455 | /* mark as used */ | ||
456 | lastdata->can_dlc |= RX_RECV; | ||
457 | |||
458 | /* throttle bcm_rx_changed ? */ | ||
459 | if ((op->thrtimer.expires) || | ||
460 | ((op->j_ival2) && (nexttx > jiffies))) { | ||
461 | /* we are already waiting OR we have to start waiting */ | ||
462 | |||
463 | /* mark as 'throttled' */ | ||
464 | lastdata->can_dlc |= RX_THR; | ||
465 | |||
466 | if (!(op->thrtimer.expires)) { | ||
467 | /* start the timer only the first time */ | ||
468 | mod_timer(&op->thrtimer, nexttx); | ||
469 | } | ||
470 | |||
471 | } else { | ||
472 | /* send RX_CHANGED to the user immediately */ | ||
473 | bcm_rx_changed(op, rxdata); | ||
474 | } | ||
475 | } | ||
476 | |||
477 | /* | ||
478 | * bcm_rx_cmp_to_index - (bit)compares the currently received data to formerly | ||
479 | * received data stored in op->last_frames[] | ||
480 | */ | ||
481 | static void bcm_rx_cmp_to_index(struct bcm_op *op, int index, | ||
482 | struct can_frame *rxdata) | ||
483 | { | ||
484 | /* | ||
485 | * no one uses the MSBs of can_dlc for comparation, | ||
486 | * so we use it here to detect the first time of reception | ||
487 | */ | ||
488 | |||
489 | if (!(op->last_frames[index].can_dlc & RX_RECV)) { | ||
490 | /* received data for the first time => send update to user */ | ||
491 | bcm_rx_update_and_send(op, &op->last_frames[index], rxdata); | ||
492 | return; | ||
493 | } | ||
494 | |||
495 | /* do a real check in can_frame data section */ | ||
496 | |||
497 | if ((GET_U64(&op->frames[index]) & GET_U64(rxdata)) != | ||
498 | (GET_U64(&op->frames[index]) & GET_U64(&op->last_frames[index]))) { | ||
499 | bcm_rx_update_and_send(op, &op->last_frames[index], rxdata); | ||
500 | return; | ||
501 | } | ||
502 | |||
503 | if (op->flags & RX_CHECK_DLC) { | ||
504 | /* do a real check in can_frame dlc */ | ||
505 | if (rxdata->can_dlc != (op->last_frames[index].can_dlc & | ||
506 | BCM_CAN_DLC_MASK)) { | ||
507 | bcm_rx_update_and_send(op, &op->last_frames[index], | ||
508 | rxdata); | ||
509 | return; | ||
510 | } | ||
511 | } | ||
512 | } | ||
513 | |||
514 | /* | ||
515 | * bcm_rx_starttimer - enable timeout monitoring for CAN frame receiption | ||
516 | */ | ||
517 | static void bcm_rx_starttimer(struct bcm_op *op) | ||
518 | { | ||
519 | if (op->flags & RX_NO_AUTOTIMER) | ||
520 | return; | ||
521 | |||
522 | if (op->j_ival1) | ||
523 | mod_timer(&op->timer, jiffies + op->j_ival1); | ||
524 | } | ||
525 | |||
526 | /* | ||
527 | * bcm_rx_timeout_handler - when the (cyclic) CAN frame receiption timed out | ||
528 | */ | ||
529 | static void bcm_rx_timeout_handler(unsigned long data) | ||
530 | { | ||
531 | struct bcm_op *op = (struct bcm_op *)data; | ||
532 | struct bcm_msg_head msg_head; | ||
533 | |||
534 | msg_head.opcode = RX_TIMEOUT; | ||
535 | msg_head.flags = op->flags; | ||
536 | msg_head.count = op->count; | ||
537 | msg_head.ival1 = op->ival1; | ||
538 | msg_head.ival2 = op->ival2; | ||
539 | msg_head.can_id = op->can_id; | ||
540 | msg_head.nframes = 0; | ||
541 | |||
542 | bcm_send_to_user(op, &msg_head, NULL, 0); | ||
543 | |||
544 | /* no restart of the timer is done here! */ | ||
545 | |||
546 | /* if user wants to be informed, when cyclic CAN-Messages come back */ | ||
547 | if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) { | ||
548 | /* clear received can_frames to indicate 'nothing received' */ | ||
549 | memset(op->last_frames, 0, op->nframes * CFSIZ); | ||
550 | } | ||
551 | } | ||
552 | |||
553 | /* | ||
554 | * bcm_rx_thr_handler - the time for blocked content updates is over now: | ||
555 | * Check for throttled data and send it to the userspace | ||
556 | */ | ||
557 | static void bcm_rx_thr_handler(unsigned long data) | ||
558 | { | ||
559 | struct bcm_op *op = (struct bcm_op *)data; | ||
560 | int i = 0; | ||
561 | |||
562 | /* mark disabled / consumed timer */ | ||
563 | op->thrtimer.expires = 0; | ||
564 | |||
565 | if (op->nframes > 1) { | ||
566 | /* for MUX filter we start at index 1 */ | ||
567 | for (i = 1; i < op->nframes; i++) { | ||
568 | if ((op->last_frames) && | ||
569 | (op->last_frames[i].can_dlc & RX_THR)) { | ||
570 | op->last_frames[i].can_dlc &= ~RX_THR; | ||
571 | bcm_rx_changed(op, &op->last_frames[i]); | ||
572 | } | ||
573 | } | ||
574 | |||
575 | } else { | ||
576 | /* for RX_FILTER_ID and simple filter */ | ||
577 | if (op->last_frames && (op->last_frames[0].can_dlc & RX_THR)) { | ||
578 | op->last_frames[0].can_dlc &= ~RX_THR; | ||
579 | bcm_rx_changed(op, &op->last_frames[0]); | ||
580 | } | ||
581 | } | ||
582 | } | ||
583 | |||
584 | /* | ||
585 | * bcm_rx_handler - handle a CAN frame receiption | ||
586 | */ | ||
587 | static void bcm_rx_handler(struct sk_buff *skb, void *data) | ||
588 | { | ||
589 | struct bcm_op *op = (struct bcm_op *)data; | ||
590 | struct can_frame rxframe; | ||
591 | int i; | ||
592 | |||
593 | /* disable timeout */ | ||
594 | del_timer(&op->timer); | ||
595 | |||
596 | if (skb->len == sizeof(rxframe)) { | ||
597 | memcpy(&rxframe, skb->data, sizeof(rxframe)); | ||
598 | /* save rx timestamp */ | ||
599 | op->rx_stamp = skb->tstamp; | ||
600 | /* save originator for recvfrom() */ | ||
601 | op->rx_ifindex = skb->dev->ifindex; | ||
602 | /* update statistics */ | ||
603 | op->frames_abs++; | ||
604 | kfree_skb(skb); | ||
605 | |||
606 | } else { | ||
607 | kfree_skb(skb); | ||
608 | return; | ||
609 | } | ||
610 | |||
611 | if (op->can_id != rxframe.can_id) | ||
612 | return; | ||
613 | |||
614 | if (op->flags & RX_RTR_FRAME) { | ||
615 | /* send reply for RTR-request (placed in op->frames[0]) */ | ||
616 | bcm_can_tx(op); | ||
617 | return; | ||
618 | } | ||
619 | |||
620 | if (op->flags & RX_FILTER_ID) { | ||
621 | /* the easiest case */ | ||
622 | bcm_rx_update_and_send(op, &op->last_frames[0], &rxframe); | ||
623 | bcm_rx_starttimer(op); | ||
624 | return; | ||
625 | } | ||
626 | |||
627 | if (op->nframes == 1) { | ||
628 | /* simple compare with index 0 */ | ||
629 | bcm_rx_cmp_to_index(op, 0, &rxframe); | ||
630 | bcm_rx_starttimer(op); | ||
631 | return; | ||
632 | } | ||
633 | |||
634 | if (op->nframes > 1) { | ||
635 | /* | ||
636 | * multiplex compare | ||
637 | * | ||
638 | * find the first multiplex mask that fits. | ||
639 | * Remark: The MUX-mask is stored in index 0 | ||
640 | */ | ||
641 | |||
642 | for (i = 1; i < op->nframes; i++) { | ||
643 | if ((GET_U64(&op->frames[0]) & GET_U64(&rxframe)) == | ||
644 | (GET_U64(&op->frames[0]) & | ||
645 | GET_U64(&op->frames[i]))) { | ||
646 | bcm_rx_cmp_to_index(op, i, &rxframe); | ||
647 | break; | ||
648 | } | ||
649 | } | ||
650 | bcm_rx_starttimer(op); | ||
651 | } | ||
652 | } | ||
653 | |||
654 | /* | ||
655 | * helpers for bcm_op handling: find & delete bcm [rx|tx] op elements | ||
656 | */ | ||
657 | static struct bcm_op *bcm_find_op(struct list_head *ops, canid_t can_id, | ||
658 | int ifindex) | ||
659 | { | ||
660 | struct bcm_op *op; | ||
661 | |||
662 | list_for_each_entry(op, ops, list) { | ||
663 | if ((op->can_id == can_id) && (op->ifindex == ifindex)) | ||
664 | return op; | ||
665 | } | ||
666 | |||
667 | return NULL; | ||
668 | } | ||
669 | |||
670 | static void bcm_remove_op(struct bcm_op *op) | ||
671 | { | ||
672 | del_timer(&op->timer); | ||
673 | del_timer(&op->thrtimer); | ||
674 | |||
675 | if ((op->frames) && (op->frames != &op->sframe)) | ||
676 | kfree(op->frames); | ||
677 | |||
678 | if ((op->last_frames) && (op->last_frames != &op->last_sframe)) | ||
679 | kfree(op->last_frames); | ||
680 | |||
681 | kfree(op); | ||
682 | |||
683 | return; | ||
684 | } | ||
685 | |||
686 | static void bcm_rx_unreg(struct net_device *dev, struct bcm_op *op) | ||
687 | { | ||
688 | if (op->rx_reg_dev == dev) { | ||
689 | can_rx_unregister(dev, op->can_id, REGMASK(op->can_id), | ||
690 | bcm_rx_handler, op); | ||
691 | |||
692 | /* mark as removed subscription */ | ||
693 | op->rx_reg_dev = NULL; | ||
694 | } else | ||
695 | printk(KERN_ERR "can-bcm: bcm_rx_unreg: registered device " | ||
696 | "mismatch %p %p\n", op->rx_reg_dev, dev); | ||
697 | } | ||
698 | |||
699 | /* | ||
700 | * bcm_delete_rx_op - find and remove a rx op (returns number of removed ops) | ||
701 | */ | ||
702 | static int bcm_delete_rx_op(struct list_head *ops, canid_t can_id, int ifindex) | ||
703 | { | ||
704 | struct bcm_op *op, *n; | ||
705 | |||
706 | list_for_each_entry_safe(op, n, ops, list) { | ||
707 | if ((op->can_id == can_id) && (op->ifindex == ifindex)) { | ||
708 | |||
709 | /* | ||
710 | * Don't care if we're bound or not (due to netdev | ||
711 | * problems) can_rx_unregister() is always a save | ||
712 | * thing to do here. | ||
713 | */ | ||
714 | if (op->ifindex) { | ||
715 | /* | ||
716 | * Only remove subscriptions that had not | ||
717 | * been removed due to NETDEV_UNREGISTER | ||
718 | * in bcm_notifier() | ||
719 | */ | ||
720 | if (op->rx_reg_dev) { | ||
721 | struct net_device *dev; | ||
722 | |||
723 | dev = dev_get_by_index(&init_net, | ||
724 | op->ifindex); | ||
725 | if (dev) { | ||
726 | bcm_rx_unreg(dev, op); | ||
727 | dev_put(dev); | ||
728 | } | ||
729 | } | ||
730 | } else | ||
731 | can_rx_unregister(NULL, op->can_id, | ||
732 | REGMASK(op->can_id), | ||
733 | bcm_rx_handler, op); | ||
734 | |||
735 | list_del(&op->list); | ||
736 | bcm_remove_op(op); | ||
737 | return 1; /* done */ | ||
738 | } | ||
739 | } | ||
740 | |||
741 | return 0; /* not found */ | ||
742 | } | ||
743 | |||
744 | /* | ||
745 | * bcm_delete_tx_op - find and remove a tx op (returns number of removed ops) | ||
746 | */ | ||
747 | static int bcm_delete_tx_op(struct list_head *ops, canid_t can_id, int ifindex) | ||
748 | { | ||
749 | struct bcm_op *op, *n; | ||
750 | |||
751 | list_for_each_entry_safe(op, n, ops, list) { | ||
752 | if ((op->can_id == can_id) && (op->ifindex == ifindex)) { | ||
753 | list_del(&op->list); | ||
754 | bcm_remove_op(op); | ||
755 | return 1; /* done */ | ||
756 | } | ||
757 | } | ||
758 | |||
759 | return 0; /* not found */ | ||
760 | } | ||
761 | |||
762 | /* | ||
763 | * bcm_read_op - read out a bcm_op and send it to the user (for bcm_sendmsg) | ||
764 | */ | ||
765 | static int bcm_read_op(struct list_head *ops, struct bcm_msg_head *msg_head, | ||
766 | int ifindex) | ||
767 | { | ||
768 | struct bcm_op *op = bcm_find_op(ops, msg_head->can_id, ifindex); | ||
769 | |||
770 | if (!op) | ||
771 | return -EINVAL; | ||
772 | |||
773 | /* put current values into msg_head */ | ||
774 | msg_head->flags = op->flags; | ||
775 | msg_head->count = op->count; | ||
776 | msg_head->ival1 = op->ival1; | ||
777 | msg_head->ival2 = op->ival2; | ||
778 | msg_head->nframes = op->nframes; | ||
779 | |||
780 | bcm_send_to_user(op, msg_head, op->frames, 0); | ||
781 | |||
782 | return MHSIZ; | ||
783 | } | ||
784 | |||
785 | /* | ||
786 | * bcm_tx_setup - create or update a bcm tx op (for bcm_sendmsg) | ||
787 | */ | ||
788 | static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, | ||
789 | int ifindex, struct sock *sk) | ||
790 | { | ||
791 | struct bcm_sock *bo = bcm_sk(sk); | ||
792 | struct bcm_op *op; | ||
793 | int i, err; | ||
794 | |||
795 | /* we need a real device to send frames */ | ||
796 | if (!ifindex) | ||
797 | return -ENODEV; | ||
798 | |||
799 | /* we need at least one can_frame */ | ||
800 | if (msg_head->nframes < 1) | ||
801 | return -EINVAL; | ||
802 | |||
803 | /* check the given can_id */ | ||
804 | op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex); | ||
805 | |||
806 | if (op) { | ||
807 | /* update existing BCM operation */ | ||
808 | |||
809 | /* | ||
810 | * Do we need more space for the can_frames than currently | ||
811 | * allocated? -> This is a _really_ unusual use-case and | ||
812 | * therefore (complexity / locking) it is not supported. | ||
813 | */ | ||
814 | if (msg_head->nframes > op->nframes) | ||
815 | return -E2BIG; | ||
816 | |||
817 | /* update can_frames content */ | ||
818 | for (i = 0; i < msg_head->nframes; i++) { | ||
819 | err = memcpy_fromiovec((u8 *)&op->frames[i], | ||
820 | msg->msg_iov, CFSIZ); | ||
821 | if (err < 0) | ||
822 | return err; | ||
823 | |||
824 | if (msg_head->flags & TX_CP_CAN_ID) { | ||
825 | /* copy can_id into frame */ | ||
826 | op->frames[i].can_id = msg_head->can_id; | ||
827 | } | ||
828 | } | ||
829 | |||
830 | } else { | ||
831 | /* insert new BCM operation for the given can_id */ | ||
832 | |||
833 | op = kzalloc(OPSIZ, GFP_KERNEL); | ||
834 | if (!op) | ||
835 | return -ENOMEM; | ||
836 | |||
837 | op->can_id = msg_head->can_id; | ||
838 | |||
839 | /* create array for can_frames and copy the data */ | ||
840 | if (msg_head->nframes > 1) { | ||
841 | op->frames = kmalloc(msg_head->nframes * CFSIZ, | ||
842 | GFP_KERNEL); | ||
843 | if (!op->frames) { | ||
844 | kfree(op); | ||
845 | return -ENOMEM; | ||
846 | } | ||
847 | } else | ||
848 | op->frames = &op->sframe; | ||
849 | |||
850 | for (i = 0; i < msg_head->nframes; i++) { | ||
851 | err = memcpy_fromiovec((u8 *)&op->frames[i], | ||
852 | msg->msg_iov, CFSIZ); | ||
853 | if (err < 0) { | ||
854 | if (op->frames != &op->sframe) | ||
855 | kfree(op->frames); | ||
856 | kfree(op); | ||
857 | return err; | ||
858 | } | ||
859 | |||
860 | if (msg_head->flags & TX_CP_CAN_ID) { | ||
861 | /* copy can_id into frame */ | ||
862 | op->frames[i].can_id = msg_head->can_id; | ||
863 | } | ||
864 | } | ||
865 | |||
866 | /* tx_ops never compare with previous received messages */ | ||
867 | op->last_frames = NULL; | ||
868 | |||
869 | /* bcm_can_tx / bcm_tx_timeout_handler needs this */ | ||
870 | op->sk = sk; | ||
871 | op->ifindex = ifindex; | ||
872 | |||
873 | /* initialize uninitialized (kzalloc) structure */ | ||
874 | setup_timer(&op->timer, bcm_tx_timeout_handler, | ||
875 | (unsigned long)op); | ||
876 | |||
877 | /* currently unused in tx_ops */ | ||
878 | init_timer(&op->thrtimer); | ||
879 | |||
880 | /* add this bcm_op to the list of the tx_ops */ | ||
881 | list_add(&op->list, &bo->tx_ops); | ||
882 | |||
883 | } /* if ((op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex))) */ | ||
884 | |||
885 | if (op->nframes != msg_head->nframes) { | ||
886 | op->nframes = msg_head->nframes; | ||
887 | /* start multiple frame transmission with index 0 */ | ||
888 | op->currframe = 0; | ||
889 | } | ||
890 | |||
891 | /* check flags */ | ||
892 | |||
893 | op->flags = msg_head->flags; | ||
894 | |||
895 | if (op->flags & TX_RESET_MULTI_IDX) { | ||
896 | /* start multiple frame transmission with index 0 */ | ||
897 | op->currframe = 0; | ||
898 | } | ||
899 | |||
900 | if (op->flags & SETTIMER) { | ||
901 | /* set timer values */ | ||
902 | op->count = msg_head->count; | ||
903 | op->ival1 = msg_head->ival1; | ||
904 | op->ival2 = msg_head->ival2; | ||
905 | op->j_ival1 = rounded_tv2jif(&msg_head->ival1); | ||
906 | op->j_ival2 = rounded_tv2jif(&msg_head->ival2); | ||
907 | |||
908 | /* disable an active timer due to zero values? */ | ||
909 | if (!op->j_ival1 && !op->j_ival2) | ||
910 | del_timer(&op->timer); | ||
911 | } | ||
912 | |||
913 | if ((op->flags & STARTTIMER) && | ||
914 | ((op->j_ival1 && op->count) || op->j_ival2)) { | ||
915 | |||
916 | /* spec: send can_frame when starting timer */ | ||
917 | op->flags |= TX_ANNOUNCE; | ||
918 | |||
919 | if (op->j_ival1 && (op->count > 0)) { | ||
920 | /* op->count-- is done in bcm_tx_timeout_handler */ | ||
921 | mod_timer(&op->timer, jiffies + op->j_ival1); | ||
922 | } else | ||
923 | mod_timer(&op->timer, jiffies + op->j_ival2); | ||
924 | } | ||
925 | |||
926 | if (op->flags & TX_ANNOUNCE) | ||
927 | bcm_can_tx(op); | ||
928 | |||
929 | return msg_head->nframes * CFSIZ + MHSIZ; | ||
930 | } | ||
931 | |||
932 | /* | ||
933 | * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg) | ||
934 | */ | ||
935 | static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, | ||
936 | int ifindex, struct sock *sk) | ||
937 | { | ||
938 | struct bcm_sock *bo = bcm_sk(sk); | ||
939 | struct bcm_op *op; | ||
940 | int do_rx_register; | ||
941 | int err = 0; | ||
942 | |||
943 | if ((msg_head->flags & RX_FILTER_ID) || (!(msg_head->nframes))) { | ||
944 | /* be robust against wrong usage ... */ | ||
945 | msg_head->flags |= RX_FILTER_ID; | ||
946 | /* ignore trailing garbage */ | ||
947 | msg_head->nframes = 0; | ||
948 | } | ||
949 | |||
950 | if ((msg_head->flags & RX_RTR_FRAME) && | ||
951 | ((msg_head->nframes != 1) || | ||
952 | (!(msg_head->can_id & CAN_RTR_FLAG)))) | ||
953 | return -EINVAL; | ||
954 | |||
955 | /* check the given can_id */ | ||
956 | op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex); | ||
957 | if (op) { | ||
958 | /* update existing BCM operation */ | ||
959 | |||
960 | /* | ||
961 | * Do we need more space for the can_frames than currently | ||
962 | * allocated? -> This is a _really_ unusual use-case and | ||
963 | * therefore (complexity / locking) it is not supported. | ||
964 | */ | ||
965 | if (msg_head->nframes > op->nframes) | ||
966 | return -E2BIG; | ||
967 | |||
968 | if (msg_head->nframes) { | ||
969 | /* update can_frames content */ | ||
970 | err = memcpy_fromiovec((u8 *)op->frames, | ||
971 | msg->msg_iov, | ||
972 | msg_head->nframes * CFSIZ); | ||
973 | if (err < 0) | ||
974 | return err; | ||
975 | |||
976 | /* clear last_frames to indicate 'nothing received' */ | ||
977 | memset(op->last_frames, 0, msg_head->nframes * CFSIZ); | ||
978 | } | ||
979 | |||
980 | op->nframes = msg_head->nframes; | ||
981 | |||
982 | /* Only an update -> do not call can_rx_register() */ | ||
983 | do_rx_register = 0; | ||
984 | |||
985 | } else { | ||
986 | /* insert new BCM operation for the given can_id */ | ||
987 | op = kzalloc(OPSIZ, GFP_KERNEL); | ||
988 | if (!op) | ||
989 | return -ENOMEM; | ||
990 | |||
991 | op->can_id = msg_head->can_id; | ||
992 | op->nframes = msg_head->nframes; | ||
993 | |||
994 | if (msg_head->nframes > 1) { | ||
995 | /* create array for can_frames and copy the data */ | ||
996 | op->frames = kmalloc(msg_head->nframes * CFSIZ, | ||
997 | GFP_KERNEL); | ||
998 | if (!op->frames) { | ||
999 | kfree(op); | ||
1000 | return -ENOMEM; | ||
1001 | } | ||
1002 | |||
1003 | /* create and init array for received can_frames */ | ||
1004 | op->last_frames = kzalloc(msg_head->nframes * CFSIZ, | ||
1005 | GFP_KERNEL); | ||
1006 | if (!op->last_frames) { | ||
1007 | kfree(op->frames); | ||
1008 | kfree(op); | ||
1009 | return -ENOMEM; | ||
1010 | } | ||
1011 | |||
1012 | } else { | ||
1013 | op->frames = &op->sframe; | ||
1014 | op->last_frames = &op->last_sframe; | ||
1015 | } | ||
1016 | |||
1017 | if (msg_head->nframes) { | ||
1018 | err = memcpy_fromiovec((u8 *)op->frames, msg->msg_iov, | ||
1019 | msg_head->nframes * CFSIZ); | ||
1020 | if (err < 0) { | ||
1021 | if (op->frames != &op->sframe) | ||
1022 | kfree(op->frames); | ||
1023 | if (op->last_frames != &op->last_sframe) | ||
1024 | kfree(op->last_frames); | ||
1025 | kfree(op); | ||
1026 | return err; | ||
1027 | } | ||
1028 | } | ||
1029 | |||
1030 | /* bcm_can_tx / bcm_tx_timeout_handler needs this */ | ||
1031 | op->sk = sk; | ||
1032 | op->ifindex = ifindex; | ||
1033 | |||
1034 | /* initialize uninitialized (kzalloc) structure */ | ||
1035 | setup_timer(&op->timer, bcm_rx_timeout_handler, | ||
1036 | (unsigned long)op); | ||
1037 | |||
1038 | /* init throttle timer for RX_CHANGED */ | ||
1039 | setup_timer(&op->thrtimer, bcm_rx_thr_handler, | ||
1040 | (unsigned long)op); | ||
1041 | |||
1042 | /* mark disabled timer */ | ||
1043 | op->thrtimer.expires = 0; | ||
1044 | |||
1045 | /* add this bcm_op to the list of the rx_ops */ | ||
1046 | list_add(&op->list, &bo->rx_ops); | ||
1047 | |||
1048 | /* call can_rx_register() */ | ||
1049 | do_rx_register = 1; | ||
1050 | |||
1051 | } /* if ((op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex))) */ | ||
1052 | |||
1053 | /* check flags */ | ||
1054 | op->flags = msg_head->flags; | ||
1055 | |||
1056 | if (op->flags & RX_RTR_FRAME) { | ||
1057 | |||
1058 | /* no timers in RTR-mode */ | ||
1059 | del_timer(&op->thrtimer); | ||
1060 | del_timer(&op->timer); | ||
1061 | |||
1062 | /* | ||
1063 | * funny feature in RX(!)_SETUP only for RTR-mode: | ||
1064 | * copy can_id into frame BUT without RTR-flag to | ||
1065 | * prevent a full-load-loopback-test ... ;-] | ||
1066 | */ | ||
1067 | if ((op->flags & TX_CP_CAN_ID) || | ||
1068 | (op->frames[0].can_id == op->can_id)) | ||
1069 | op->frames[0].can_id = op->can_id & ~CAN_RTR_FLAG; | ||
1070 | |||
1071 | } else { | ||
1072 | if (op->flags & SETTIMER) { | ||
1073 | |||
1074 | /* set timer value */ | ||
1075 | op->ival1 = msg_head->ival1; | ||
1076 | op->ival2 = msg_head->ival2; | ||
1077 | op->j_ival1 = rounded_tv2jif(&msg_head->ival1); | ||
1078 | op->j_ival2 = rounded_tv2jif(&msg_head->ival2); | ||
1079 | |||
1080 | /* disable an active timer due to zero value? */ | ||
1081 | if (!op->j_ival1) | ||
1082 | del_timer(&op->timer); | ||
1083 | |||
1084 | /* free currently blocked msgs ? */ | ||
1085 | if (op->thrtimer.expires) { | ||
1086 | /* send blocked msgs hereafter */ | ||
1087 | mod_timer(&op->thrtimer, jiffies + 2); | ||
1088 | } | ||
1089 | |||
1090 | /* | ||
1091 | * if (op->j_ival2) is zero, no (new) throttling | ||
1092 | * will happen. For details see functions | ||
1093 | * bcm_rx_update_and_send() and bcm_rx_thr_handler() | ||
1094 | */ | ||
1095 | } | ||
1096 | |||
1097 | if ((op->flags & STARTTIMER) && op->j_ival1) | ||
1098 | mod_timer(&op->timer, jiffies + op->j_ival1); | ||
1099 | } | ||
1100 | |||
1101 | /* now we can register for can_ids, if we added a new bcm_op */ | ||
1102 | if (do_rx_register) { | ||
1103 | if (ifindex) { | ||
1104 | struct net_device *dev; | ||
1105 | |||
1106 | dev = dev_get_by_index(&init_net, ifindex); | ||
1107 | if (dev) { | ||
1108 | err = can_rx_register(dev, op->can_id, | ||
1109 | REGMASK(op->can_id), | ||
1110 | bcm_rx_handler, op, | ||
1111 | "bcm"); | ||
1112 | |||
1113 | op->rx_reg_dev = dev; | ||
1114 | dev_put(dev); | ||
1115 | } | ||
1116 | |||
1117 | } else | ||
1118 | err = can_rx_register(NULL, op->can_id, | ||
1119 | REGMASK(op->can_id), | ||
1120 | bcm_rx_handler, op, "bcm"); | ||
1121 | if (err) { | ||
1122 | /* this bcm rx op is broken -> remove it */ | ||
1123 | list_del(&op->list); | ||
1124 | bcm_remove_op(op); | ||
1125 | return err; | ||
1126 | } | ||
1127 | } | ||
1128 | |||
1129 | return msg_head->nframes * CFSIZ + MHSIZ; | ||
1130 | } | ||
1131 | |||
1132 | /* | ||
1133 | * bcm_tx_send - send a single CAN frame to the CAN interface (for bcm_sendmsg) | ||
1134 | */ | ||
1135 | static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) | ||
1136 | { | ||
1137 | struct sk_buff *skb; | ||
1138 | struct net_device *dev; | ||
1139 | int err; | ||
1140 | |||
1141 | /* we need a real device to send frames */ | ||
1142 | if (!ifindex) | ||
1143 | return -ENODEV; | ||
1144 | |||
1145 | skb = alloc_skb(CFSIZ, GFP_KERNEL); | ||
1146 | |||
1147 | if (!skb) | ||
1148 | return -ENOMEM; | ||
1149 | |||
1150 | err = memcpy_fromiovec(skb_put(skb, CFSIZ), msg->msg_iov, CFSIZ); | ||
1151 | if (err < 0) { | ||
1152 | kfree_skb(skb); | ||
1153 | return err; | ||
1154 | } | ||
1155 | |||
1156 | dev = dev_get_by_index(&init_net, ifindex); | ||
1157 | if (!dev) { | ||
1158 | kfree_skb(skb); | ||
1159 | return -ENODEV; | ||
1160 | } | ||
1161 | |||
1162 | skb->dev = dev; | ||
1163 | skb->sk = sk; | ||
1164 | can_send(skb, 1); /* send with loopback */ | ||
1165 | dev_put(dev); | ||
1166 | |||
1167 | return CFSIZ + MHSIZ; | ||
1168 | } | ||
1169 | |||
1170 | /* | ||
1171 | * bcm_sendmsg - process BCM commands (opcodes) from the userspace | ||
1172 | */ | ||
1173 | static int bcm_sendmsg(struct kiocb *iocb, struct socket *sock, | ||
1174 | struct msghdr *msg, size_t size) | ||
1175 | { | ||
1176 | struct sock *sk = sock->sk; | ||
1177 | struct bcm_sock *bo = bcm_sk(sk); | ||
1178 | int ifindex = bo->ifindex; /* default ifindex for this bcm_op */ | ||
1179 | struct bcm_msg_head msg_head; | ||
1180 | int ret; /* read bytes or error codes as return value */ | ||
1181 | |||
1182 | if (!bo->bound) | ||
1183 | return -ENOTCONN; | ||
1184 | |||
1185 | /* check for alternative ifindex for this bcm_op */ | ||
1186 | |||
1187 | if (!ifindex && msg->msg_name) { | ||
1188 | /* no bound device as default => check msg_name */ | ||
1189 | struct sockaddr_can *addr = | ||
1190 | (struct sockaddr_can *)msg->msg_name; | ||
1191 | |||
1192 | if (addr->can_family != AF_CAN) | ||
1193 | return -EINVAL; | ||
1194 | |||
1195 | /* ifindex from sendto() */ | ||
1196 | ifindex = addr->can_ifindex; | ||
1197 | |||
1198 | if (ifindex) { | ||
1199 | struct net_device *dev; | ||
1200 | |||
1201 | dev = dev_get_by_index(&init_net, ifindex); | ||
1202 | if (!dev) | ||
1203 | return -ENODEV; | ||
1204 | |||
1205 | if (dev->type != ARPHRD_CAN) { | ||
1206 | dev_put(dev); | ||
1207 | return -ENODEV; | ||
1208 | } | ||
1209 | |||
1210 | dev_put(dev); | ||
1211 | } | ||
1212 | } | ||
1213 | |||
1214 | /* read message head information */ | ||
1215 | |||
1216 | ret = memcpy_fromiovec((u8 *)&msg_head, msg->msg_iov, MHSIZ); | ||
1217 | if (ret < 0) | ||
1218 | return ret; | ||
1219 | |||
1220 | lock_sock(sk); | ||
1221 | |||
1222 | switch (msg_head.opcode) { | ||
1223 | |||
1224 | case TX_SETUP: | ||
1225 | ret = bcm_tx_setup(&msg_head, msg, ifindex, sk); | ||
1226 | break; | ||
1227 | |||
1228 | case RX_SETUP: | ||
1229 | ret = bcm_rx_setup(&msg_head, msg, ifindex, sk); | ||
1230 | break; | ||
1231 | |||
1232 | case TX_DELETE: | ||
1233 | if (bcm_delete_tx_op(&bo->tx_ops, msg_head.can_id, ifindex)) | ||
1234 | ret = MHSIZ; | ||
1235 | else | ||
1236 | ret = -EINVAL; | ||
1237 | break; | ||
1238 | |||
1239 | case RX_DELETE: | ||
1240 | if (bcm_delete_rx_op(&bo->rx_ops, msg_head.can_id, ifindex)) | ||
1241 | ret = MHSIZ; | ||
1242 | else | ||
1243 | ret = -EINVAL; | ||
1244 | break; | ||
1245 | |||
1246 | case TX_READ: | ||
1247 | /* reuse msg_head for the reply to TX_READ */ | ||
1248 | msg_head.opcode = TX_STATUS; | ||
1249 | ret = bcm_read_op(&bo->tx_ops, &msg_head, ifindex); | ||
1250 | break; | ||
1251 | |||
1252 | case RX_READ: | ||
1253 | /* reuse msg_head for the reply to RX_READ */ | ||
1254 | msg_head.opcode = RX_STATUS; | ||
1255 | ret = bcm_read_op(&bo->rx_ops, &msg_head, ifindex); | ||
1256 | break; | ||
1257 | |||
1258 | case TX_SEND: | ||
1259 | /* we need at least one can_frame */ | ||
1260 | if (msg_head.nframes < 1) | ||
1261 | ret = -EINVAL; | ||
1262 | else | ||
1263 | ret = bcm_tx_send(msg, ifindex, sk); | ||
1264 | break; | ||
1265 | |||
1266 | default: | ||
1267 | ret = -EINVAL; | ||
1268 | break; | ||
1269 | } | ||
1270 | |||
1271 | release_sock(sk); | ||
1272 | |||
1273 | return ret; | ||
1274 | } | ||
1275 | |||
1276 | /* | ||
1277 | * notification handler for netdevice status changes | ||
1278 | */ | ||
1279 | static int bcm_notifier(struct notifier_block *nb, unsigned long msg, | ||
1280 | void *data) | ||
1281 | { | ||
1282 | struct net_device *dev = (struct net_device *)data; | ||
1283 | struct bcm_sock *bo = container_of(nb, struct bcm_sock, notifier); | ||
1284 | struct sock *sk = &bo->sk; | ||
1285 | struct bcm_op *op; | ||
1286 | int notify_enodev = 0; | ||
1287 | |||
1288 | if (dev->nd_net != &init_net) | ||
1289 | return NOTIFY_DONE; | ||
1290 | |||
1291 | if (dev->type != ARPHRD_CAN) | ||
1292 | return NOTIFY_DONE; | ||
1293 | |||
1294 | switch (msg) { | ||
1295 | |||
1296 | case NETDEV_UNREGISTER: | ||
1297 | lock_sock(sk); | ||
1298 | |||
1299 | /* remove device specific receive entries */ | ||
1300 | list_for_each_entry(op, &bo->rx_ops, list) | ||
1301 | if (op->rx_reg_dev == dev) | ||
1302 | bcm_rx_unreg(dev, op); | ||
1303 | |||
1304 | /* remove device reference, if this is our bound device */ | ||
1305 | if (bo->bound && bo->ifindex == dev->ifindex) { | ||
1306 | bo->bound = 0; | ||
1307 | bo->ifindex = 0; | ||
1308 | notify_enodev = 1; | ||
1309 | } | ||
1310 | |||
1311 | release_sock(sk); | ||
1312 | |||
1313 | if (notify_enodev) { | ||
1314 | sk->sk_err = ENODEV; | ||
1315 | if (!sock_flag(sk, SOCK_DEAD)) | ||
1316 | sk->sk_error_report(sk); | ||
1317 | } | ||
1318 | break; | ||
1319 | |||
1320 | case NETDEV_DOWN: | ||
1321 | if (bo->bound && bo->ifindex == dev->ifindex) { | ||
1322 | sk->sk_err = ENETDOWN; | ||
1323 | if (!sock_flag(sk, SOCK_DEAD)) | ||
1324 | sk->sk_error_report(sk); | ||
1325 | } | ||
1326 | } | ||
1327 | |||
1328 | return NOTIFY_DONE; | ||
1329 | } | ||
1330 | |||
1331 | /* | ||
1332 | * initial settings for all BCM sockets to be set at socket creation time | ||
1333 | */ | ||
1334 | static int bcm_init(struct sock *sk) | ||
1335 | { | ||
1336 | struct bcm_sock *bo = bcm_sk(sk); | ||
1337 | |||
1338 | bo->bound = 0; | ||
1339 | bo->ifindex = 0; | ||
1340 | bo->dropped_usr_msgs = 0; | ||
1341 | bo->bcm_proc_read = NULL; | ||
1342 | |||
1343 | INIT_LIST_HEAD(&bo->tx_ops); | ||
1344 | INIT_LIST_HEAD(&bo->rx_ops); | ||
1345 | |||
1346 | /* set notifier */ | ||
1347 | bo->notifier.notifier_call = bcm_notifier; | ||
1348 | |||
1349 | register_netdevice_notifier(&bo->notifier); | ||
1350 | |||
1351 | return 0; | ||
1352 | } | ||
1353 | |||
1354 | /* | ||
1355 | * standard socket functions | ||
1356 | */ | ||
1357 | static int bcm_release(struct socket *sock) | ||
1358 | { | ||
1359 | struct sock *sk = sock->sk; | ||
1360 | struct bcm_sock *bo = bcm_sk(sk); | ||
1361 | struct bcm_op *op, *next; | ||
1362 | |||
1363 | /* remove bcm_ops, timer, rx_unregister(), etc. */ | ||
1364 | |||
1365 | unregister_netdevice_notifier(&bo->notifier); | ||
1366 | |||
1367 | lock_sock(sk); | ||
1368 | |||
1369 | list_for_each_entry_safe(op, next, &bo->tx_ops, list) | ||
1370 | bcm_remove_op(op); | ||
1371 | |||
1372 | list_for_each_entry_safe(op, next, &bo->rx_ops, list) { | ||
1373 | /* | ||
1374 | * Don't care if we're bound or not (due to netdev problems) | ||
1375 | * can_rx_unregister() is always a save thing to do here. | ||
1376 | */ | ||
1377 | if (op->ifindex) { | ||
1378 | /* | ||
1379 | * Only remove subscriptions that had not | ||
1380 | * been removed due to NETDEV_UNREGISTER | ||
1381 | * in bcm_notifier() | ||
1382 | */ | ||
1383 | if (op->rx_reg_dev) { | ||
1384 | struct net_device *dev; | ||
1385 | |||
1386 | dev = dev_get_by_index(&init_net, op->ifindex); | ||
1387 | if (dev) { | ||
1388 | bcm_rx_unreg(dev, op); | ||
1389 | dev_put(dev); | ||
1390 | } | ||
1391 | } | ||
1392 | } else | ||
1393 | can_rx_unregister(NULL, op->can_id, | ||
1394 | REGMASK(op->can_id), | ||
1395 | bcm_rx_handler, op); | ||
1396 | |||
1397 | bcm_remove_op(op); | ||
1398 | } | ||
1399 | |||
1400 | /* remove procfs entry */ | ||
1401 | if (proc_dir && bo->bcm_proc_read) | ||
1402 | remove_proc_entry(bo->procname, proc_dir); | ||
1403 | |||
1404 | /* remove device reference */ | ||
1405 | if (bo->bound) { | ||
1406 | bo->bound = 0; | ||
1407 | bo->ifindex = 0; | ||
1408 | } | ||
1409 | |||
1410 | release_sock(sk); | ||
1411 | sock_put(sk); | ||
1412 | |||
1413 | return 0; | ||
1414 | } | ||
1415 | |||
1416 | static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, | ||
1417 | int flags) | ||
1418 | { | ||
1419 | struct sockaddr_can *addr = (struct sockaddr_can *)uaddr; | ||
1420 | struct sock *sk = sock->sk; | ||
1421 | struct bcm_sock *bo = bcm_sk(sk); | ||
1422 | |||
1423 | if (bo->bound) | ||
1424 | return -EISCONN; | ||
1425 | |||
1426 | /* bind a device to this socket */ | ||
1427 | if (addr->can_ifindex) { | ||
1428 | struct net_device *dev; | ||
1429 | |||
1430 | dev = dev_get_by_index(&init_net, addr->can_ifindex); | ||
1431 | if (!dev) | ||
1432 | return -ENODEV; | ||
1433 | |||
1434 | if (dev->type != ARPHRD_CAN) { | ||
1435 | dev_put(dev); | ||
1436 | return -ENODEV; | ||
1437 | } | ||
1438 | |||
1439 | bo->ifindex = dev->ifindex; | ||
1440 | dev_put(dev); | ||
1441 | |||
1442 | } else { | ||
1443 | /* no interface reference for ifindex = 0 ('any' CAN device) */ | ||
1444 | bo->ifindex = 0; | ||
1445 | } | ||
1446 | |||
1447 | bo->bound = 1; | ||
1448 | |||
1449 | if (proc_dir) { | ||
1450 | /* unique socket address as filename */ | ||
1451 | sprintf(bo->procname, "%p", sock); | ||
1452 | bo->bcm_proc_read = create_proc_read_entry(bo->procname, 0644, | ||
1453 | proc_dir, | ||
1454 | bcm_read_proc, sk); | ||
1455 | } | ||
1456 | |||
1457 | return 0; | ||
1458 | } | ||
1459 | |||
1460 | static int bcm_recvmsg(struct kiocb *iocb, struct socket *sock, | ||
1461 | struct msghdr *msg, size_t size, int flags) | ||
1462 | { | ||
1463 | struct sock *sk = sock->sk; | ||
1464 | struct sk_buff *skb; | ||
1465 | int error = 0; | ||
1466 | int noblock; | ||
1467 | int err; | ||
1468 | |||
1469 | noblock = flags & MSG_DONTWAIT; | ||
1470 | flags &= ~MSG_DONTWAIT; | ||
1471 | skb = skb_recv_datagram(sk, flags, noblock, &error); | ||
1472 | if (!skb) | ||
1473 | return error; | ||
1474 | |||
1475 | if (skb->len < size) | ||
1476 | size = skb->len; | ||
1477 | |||
1478 | err = memcpy_toiovec(msg->msg_iov, skb->data, size); | ||
1479 | if (err < 0) { | ||
1480 | skb_free_datagram(sk, skb); | ||
1481 | return err; | ||
1482 | } | ||
1483 | |||
1484 | sock_recv_timestamp(msg, sk, skb); | ||
1485 | |||
1486 | if (msg->msg_name) { | ||
1487 | msg->msg_namelen = sizeof(struct sockaddr_can); | ||
1488 | memcpy(msg->msg_name, skb->cb, msg->msg_namelen); | ||
1489 | } | ||
1490 | |||
1491 | skb_free_datagram(sk, skb); | ||
1492 | |||
1493 | return size; | ||
1494 | } | ||
1495 | |||
1496 | static struct proto_ops bcm_ops __read_mostly = { | ||
1497 | .family = PF_CAN, | ||
1498 | .release = bcm_release, | ||
1499 | .bind = sock_no_bind, | ||
1500 | .connect = bcm_connect, | ||
1501 | .socketpair = sock_no_socketpair, | ||
1502 | .accept = sock_no_accept, | ||
1503 | .getname = sock_no_getname, | ||
1504 | .poll = datagram_poll, | ||
1505 | .ioctl = NULL, /* use can_ioctl() from af_can.c */ | ||
1506 | .listen = sock_no_listen, | ||
1507 | .shutdown = sock_no_shutdown, | ||
1508 | .setsockopt = sock_no_setsockopt, | ||
1509 | .getsockopt = sock_no_getsockopt, | ||
1510 | .sendmsg = bcm_sendmsg, | ||
1511 | .recvmsg = bcm_recvmsg, | ||
1512 | .mmap = sock_no_mmap, | ||
1513 | .sendpage = sock_no_sendpage, | ||
1514 | }; | ||
1515 | |||
1516 | static struct proto bcm_proto __read_mostly = { | ||
1517 | .name = "CAN_BCM", | ||
1518 | .owner = THIS_MODULE, | ||
1519 | .obj_size = sizeof(struct bcm_sock), | ||
1520 | .init = bcm_init, | ||
1521 | }; | ||
1522 | |||
1523 | static struct can_proto bcm_can_proto __read_mostly = { | ||
1524 | .type = SOCK_DGRAM, | ||
1525 | .protocol = CAN_BCM, | ||
1526 | .capability = -1, | ||
1527 | .ops = &bcm_ops, | ||
1528 | .prot = &bcm_proto, | ||
1529 | }; | ||
1530 | |||
1531 | static int __init bcm_module_init(void) | ||
1532 | { | ||
1533 | int err; | ||
1534 | |||
1535 | printk(banner); | ||
1536 | |||
1537 | err = can_proto_register(&bcm_can_proto); | ||
1538 | if (err < 0) { | ||
1539 | printk(KERN_ERR "can: registration of bcm protocol failed\n"); | ||
1540 | return err; | ||
1541 | } | ||
1542 | |||
1543 | /* create /proc/net/can-bcm directory */ | ||
1544 | proc_dir = proc_mkdir("can-bcm", init_net.proc_net); | ||
1545 | |||
1546 | if (proc_dir) | ||
1547 | proc_dir->owner = THIS_MODULE; | ||
1548 | |||
1549 | return 0; | ||
1550 | } | ||
1551 | |||
1552 | static void __exit bcm_module_exit(void) | ||
1553 | { | ||
1554 | can_proto_unregister(&bcm_can_proto); | ||
1555 | |||
1556 | if (proc_dir) | ||
1557 | proc_net_remove(&init_net, "can-bcm"); | ||
1558 | } | ||
1559 | |||
1560 | module_init(bcm_module_init); | ||
1561 | module_exit(bcm_module_exit); | ||