1 files changed, 41 insertions, 33 deletions

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4adba09e80ca..4d2b582dd055 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -44,7 +44,7 @@
 #define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ)
 #define IEEE80211_SCAN_INTERVAL (2 * HZ)
 #define IEEE80211_SCAN_INTERVAL_SLOW (15 * HZ)
-#define IEEE80211_IBSS_JOIN_TIMEOUT (20 * HZ)
+#define IEEE80211_IBSS_JOIN_TIMEOUT (7 * HZ)
 
 #define IEEE80211_PROBE_DELAY (HZ / 33)
 #define IEEE80211_CHANNEL_TIME (HZ / 33)
@@ -730,7 +730,17 @@ static void ieee80211_send_assoc(struct net_device *dev,
                 if (bss->wmm_ie) {
                         wmm = 1;
                 }
+
+                /* get all rates supported by the device and the AP as
+                 * some APs don't like getting a superset of their rates
+                 * in the association request (e.g. D-Link DAP 1353 in
+                 * b-only mode) */
+                rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+
                 ieee80211_rx_bss_put(dev, bss);
+        } else {
+                rates = ~0;
+                rates_len = sband->n_bitrates;
         }
 
         mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
@@ -761,10 +771,7 @@ static void ieee80211_send_assoc(struct net_device *dev,
         *pos++ = ifsta->ssid_len;
         memcpy(pos, ifsta->ssid, ifsta->ssid_len);
 
-        /* all supported rates should be added here but some APs
-         * (e.g. D-Link DAP 1353 in b-only mode) don't like that
-         * Therefore only add rates the AP supports */
-        rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+        /* add all rates which were marked to be used above */
         supp_rates_len = rates_len;
         if (supp_rates_len > 8)
                 supp_rates_len = 8;
@@ -1318,7 +1325,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
 
         /* prepare reordering buffer */
         tid_agg_rx->reorder_buf =
-                kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+                kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
         if (!tid_agg_rx->reorder_buf) {
                 if (net_ratelimit())
                         printk(KERN_ERR "can not allocate reordering buffer "
@@ -1327,7 +1334,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
                 goto end;
         }
         memset(tid_agg_rx->reorder_buf, 0,
-                buf_size * sizeof(struct sk_buf *));
+                buf_size * sizeof(struct sk_buff *));
 
         if (local->ops->ampdu_action)
                 ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
@@ -1607,7 +1614,7 @@ void sta_addba_resp_timer_expired(unsigned long data)
          * only one argument, and both sta_info and TID are needed, so init
          * flow in sta_info_create gives the TID as data, while the timer_to_id
          * array gives the sta through container_of */
-        u16 tid = *(int *)data;
+        u16 tid = *(u8 *)data;
         struct sta_info *temp_sta = container_of((void *)data,
                 struct sta_info, timer_to_tid[tid]);
 
@@ -1655,7 +1662,7 @@ timer_expired_exit:
 void sta_rx_agg_session_timer_expired(unsigned long data)
 {
         /* not an elegant detour, but there is no choice as the timer passes
-         * only one argument, and verious sta_info are needed here, so init
+         * only one argument, and various sta_info are needed here, so init
          * flow in sta_info_create gives the TID as data, while the timer_to_id
          * array gives the sta through container_of */
         u8 *ptid = (u8 *)data;
@@ -2329,6 +2336,7 @@ static int ieee80211_sta_join_ibss(struct net_device *dev,
         u8 *pos;
         struct ieee80211_sub_if_data *sdata;
         struct ieee80211_supported_band *sband;
+        union iwreq_data wrqu;
 
         sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 
@@ -2351,13 +2359,10 @@ static int ieee80211_sta_join_ibss(struct net_device *dev,
         sdata->drop_unencrypted = bss->capability &
                 WLAN_CAPABILITY_PRIVACY ? 1 : 0;
 
-        res = ieee80211_set_freq(local, bss->freq);
+        res = ieee80211_set_freq(dev, bss->freq);
 
-        if (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS) {
-                printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
-                       "%d MHz\n", dev->name, local->oper_channel->center_freq);
-                return -1;
-        }
+        if (res)
+                return res;
 
         /* Set beacon template */
         skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
@@ -2472,7 +2477,9 @@ static int ieee80211_sta_join_ibss(struct net_device *dev,
         ifsta->state = IEEE80211_IBSS_JOINED;
         mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
 
-        ieee80211_rx_bss_put(dev, bss);
+        memset(&wrqu, 0, sizeof(wrqu));
+        memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN);
+        wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
 
         return res;
 }
@@ -3446,21 +3453,17 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
         struct ieee80211_sta_bss *bss, *selected = NULL;
         int top_rssi = 0, freq;
 
-        if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
-            IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) {
-                ifsta->state = IEEE80211_AUTHENTICATE;
-                ieee80211_sta_reset_auth(dev, ifsta);
-                return 0;
-        }
-
         spin_lock_bh(&local->sta_bss_lock);
         freq = local->oper_channel->center_freq;
         list_for_each_entry(bss, &local->sta_bss_list, list) {
                 if (!(bss->capability & WLAN_CAPABILITY_ESS))
                         continue;
 
-                if (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
-                    !!sdata->default_key)
+                if ((ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
+                        IEEE80211_STA_AUTO_BSSID_SEL |
+                        IEEE80211_STA_AUTO_CHANNEL_SEL)) &&
+                    (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
+                     !!sdata->default_key))
                         continue;
 
                 if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) &&
@@ -3485,7 +3488,7 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
         spin_unlock_bh(&local->sta_bss_lock);
 
         if (selected) {
-                ieee80211_set_freq(local, selected->freq);
+                ieee80211_set_freq(dev, selected->freq);
                 if (!(ifsta->flags & IEEE80211_STA_SSID_SET))
                         ieee80211_sta_set_ssid(dev, selected->ssid,
                                                selected->ssid_len);
@@ -3520,6 +3523,7 @@ static int ieee80211_sta_create_ibss(struct net_device *dev,
         struct ieee80211_supported_band *sband;
         u8 bssid[ETH_ALEN], *pos;
         int i;
+        int ret;
         DECLARE_MAC_BUF(mac);
 
 #if 0
@@ -3564,7 +3568,9 @@ static int ieee80211_sta_create_ibss(struct net_device *dev,
                 *pos++ = (u8) (rate / 5);
         }
 
-        return ieee80211_sta_join_ibss(dev, ifsta, bss);
+        ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+        ieee80211_rx_bss_put(dev, bss);
+        return ret;
 }
 
 
@@ -3612,10 +3618,13 @@ static int ieee80211_sta_find_ibss(struct net_device *dev,
             (bss = ieee80211_rx_bss_get(dev, bssid,
                                         local->hw.conf.channel->center_freq,
                                         ifsta->ssid, ifsta->ssid_len))) {
+                int ret;
                 printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
                        " based on configured SSID\n",
                        dev->name, print_mac(mac, bssid));
-                return ieee80211_sta_join_ibss(dev, ifsta, bss);
+                ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+                ieee80211_rx_bss_put(dev, bss);
+                return ret;
         }
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
         printk(KERN_DEBUG "   did not try to join ibss\n");
@@ -4092,18 +4101,17 @@ ieee80211_sta_scan_result(struct net_device *dev,
 
         memset(&iwe, 0, sizeof(iwe));
         iwe.cmd = SIOCGIWFREQ;
-        iwe.u.freq.m = bss->freq;
-        iwe.u.freq.e = 6;
+        iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
+        iwe.u.freq.e = 0;
         current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
                                           IW_EV_FREQ_LEN);
 
         memset(&iwe, 0, sizeof(iwe));
         iwe.cmd = SIOCGIWFREQ;
-        iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
-        iwe.u.freq.e = 0;
+        iwe.u.freq.m = bss->freq;
+        iwe.u.freq.e = 6;
         current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
                                           IW_EV_FREQ_LEN);
-
         memset(&iwe, 0, sizeof(iwe));
         iwe.cmd = IWEVQUAL;
         iwe.u.qual.qual = bss->signal;