21 files changed, 74 insertions, 44 deletions

diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index a9248d883675..76033831eb35 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -105,13 +105,6 @@ extern int sram_free(const void*);
 extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
-extern void led_on(int);
-extern void led_off(int);
-extern void led_toggle(int);
-extern void led_disp_num(int);
-extern void led_toggle_num(int);
-extern void init_leds(void);
-
 extern const char bfin_board_name[];
 extern unsigned long wall_jiffies;
 
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 735fa02fafb2..4725268a5ada 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -15,12 +15,16 @@
 
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
 #define ANOMALY_05000328 (1)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
@@ -92,7 +96,6 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 5a6dcc5fa36c..8f7ea112fd3a 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -176,6 +176,21 @@
 #define ANOMALY_05000315 (1)
 /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
 #define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -249,20 +264,6 @@
 #define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
 /* Internal Voltage Regulator may not start up */
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* UART Break Signal Issues */
-#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
-/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
-/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000266 (0)
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index a6b08facb242..8460ab9c324f 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -132,8 +132,8 @@
 #define ANOMALY_05000322 (1)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
 #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */
-#define ANOMALY_05000350 (__SILICON_REVISION__ < 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (1)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -145,12 +145,10 @@
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3)
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 
-
-
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
 #define ANOMALY_05000158 (0)
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 49d3cebc5293..3ad59655881a 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -75,6 +75,8 @@
 #define ANOMALY_05000365 (1)
 /* Addressing Conflict between Boot ROM and Asynchronous Memory */
 #define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
 /* Mobile DDR Operation Not Functional */
 #define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 82157caa96a2..5c5d7d7d695f 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h
index a71543084fb4..295fe6ab4584 100644
--- a/include/asm-ia64/patch.h
+++ b/include/asm-ia64/patch.h
@@ -21,6 +21,7 @@ extern void ia64_patch_imm60 (u64 insn_addr, u64 val);		/* patch "brl" w/ip-rel
 extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
 extern void ia64_patch_vtop (unsigned long start, unsigned long end);
 extern void ia64_patch_phys_stack_reg(unsigned long val);
+extern void ia64_patch_rse (unsigned long start, unsigned long end);
 extern void ia64_patch_gate (void);
 
 #endif /* _ASM_IA64_PATCH_H */
diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h
index 4b2a8d40ebc5..15f8dcfe6eee 100644
--- a/include/asm-ia64/ptrace.h
+++ b/include/asm-ia64/ptrace.h
@@ -76,7 +76,7 @@
 # define KERNEL_STACK_SIZE_ORDER                0
 #endif
 
-#define IA64_RBS_OFFSET                 ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15)
+#define IA64_RBS_OFFSET                 ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31)
 #define IA64_STK_OFFSET                 ((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
 
 #define KERNEL_STACK_SIZE               IA64_STK_OFFSET
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
index dc42a359894f..7286e4a9fe84 100644
--- a/include/asm-ia64/sections.h
+++ b/include/asm-ia64/sections.h
@@ -10,6 +10,7 @@
 
 extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
 extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___rse_patchlist[], __end___rse_patchlist[];
 extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
 extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[];
 extern char __start_gate_section[];
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index e0062d73db1c..89189488e286 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -100,7 +100,7 @@ static inline type name(const volatile type __iomem *addr)		\
 {                                                                       \
         type ret;                                                       \
         __asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync"           \
-                : "=r" (ret) : "r" (addr), "m" (*addr));                \
+                : "=r" (ret) : "r" (addr), "m" (*addr) : "memory");     \
         return ret;                                                     \
 }
 
@@ -108,8 +108,8 @@ static inline type name(const volatile type __iomem *addr)		\
 static inline void name(volatile type __iomem *addr, type val)          \
 {                                                                       \
         __asm__ __volatile__("sync;" insn                               \
-                : "=m" (*addr) : "r" (val), "r" (addr));                \
-        IO_SET_SYNC_FLAG();                                     \
+                : "=m" (*addr) : "r" (val), "r" (addr) : "memory");     \
+        IO_SET_SYNC_FLAG();                                             \
 }
 
 
@@ -333,7 +333,8 @@ static inline unsigned int name(unsigned int port)	\
                 "       .long   3b,5b\n"                \
                 ".previous"                             \
                 : "=&r" (x)                             \
-                : "r" (port + _IO_BASE));               \
+                : "r" (port + _IO_BASE)                 \
+                : "memory");                            \
         return x;                                       \
 }
 
@@ -350,7 +351,8 @@ static inline void name(unsigned int val, unsigned int port) \
                 "       .long   0b,2b\n"                \
                 "       .long   1b,2b\n"                \
                 ".previous"                             \
-                : : "r" (val), "r" (port + _IO_BASE));  \
+                : : "r" (val), "r" (port + _IO_BASE)    \
+                : "memory");                            \
 }
 
 __do_in_asm(_rec_inb, "lbzx")
diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h
index 0e959e20e9a3..41c547656130 100644
--- a/include/asm-s390/types.h
+++ b/include/asm-s390/types.h
@@ -40,7 +40,13 @@ typedef __signed__ long saddr_t;
 
 #ifndef __ASSEMBLY__
 
+typedef u64 dma64_addr_t;
+#ifdef __s390x__
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
 typedef u32 dma_addr_t;
+#endif
 
 #ifndef __s390x__
 typedef union {
diff --git a/include/linux/device.h b/include/linux/device.h
index 14616e80213c..6a2d04c011bc 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -385,6 +385,9 @@ static inline const char *dev_name(struct device *dev)
         return dev->bus_id;
 }
 
+extern int dev_set_name(struct device *dev, const char *name, ...)
+                        __attribute__((format(printf, 2, 3)));
+
 #ifdef CONFIG_NUMA
 static inline int dev_to_node(struct device *dev)
 {
diff --git a/include/linux/input.h b/include/linux/input.h
index 28a094fcfe20..e075c4b762fb 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -637,7 +637,9 @@ struct input_absinfo {
 #define SW_LID                  0x00  /* set = lid shut */
 #define SW_TABLET_MODE          0x01  /* set = tablet mode */
 #define SW_HEADPHONE_INSERT     0x02  /* set = inserted */
-#define SW_RADIO                0x03  /* set = radio enabled */
+#define SW_RFKILL_ALL           0x03  /* rfkill master switch, type "any"
+                                         set = radio enabled */
+#define SW_RADIO                SW_RFKILL_ALL   /* deprecated */
 #define SW_MAX                  0x0f
 #define SW_CNT                  (SW_MAX+1)
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 3e05e5474749..ae0be3c62375 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -766,7 +766,6 @@ struct sched_domain {
         struct sched_domain *child;     /* bottom domain must be null terminated */
         struct sched_group *groups;     /* the balancing groups of the domain */
         cpumask_t span;                 /* span of all CPUs in this domain */
-        int first_cpu;                  /* cache of the first cpu in this domain */
         unsigned long min_interval;     /* Minimum balance interval ms */
         unsigned long max_interval;     /* Maximum balance interval ms */
         unsigned int busy_factor;       /* less balancing by factor if busy */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d32123ae08ad..d8f31de632c5 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -192,6 +192,7 @@ struct uart_ops {
         void            (*shutdown)(struct uart_port *);
         void            (*set_termios)(struct uart_port *, struct ktermios *new,
                                        struct ktermios *old);
+        void            (*set_ldisc)(struct uart_port *);
         void            (*pm)(struct uart_port *, unsigned int state,
                               unsigned int oldstate);
         int             (*set_wake)(struct uart_port *, unsigned int state);
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index e9bbe3ebd721..d5ca78b93a3b 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -1,6 +1,8 @@
 #ifndef __LINUX_SPI_MMC_SPI_H
 #define __LINUX_SPI_MMC_SPI_H
 
+#include <linux/interrupt.h>
+
 struct device;
 struct mmc_host;
 
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 4bb7074a2c3a..24f3d2282e11 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -166,7 +166,9 @@ void arch_update_cpu_topology(void);
         .busy_idx               = 3,                    \
         .idle_idx               = 3,                    \
         .flags                  = SD_LOAD_BALANCE       \
-                                | SD_SERIALIZE, \
+                                | SD_BALANCE_NEWIDLE    \
+                                | SD_WAKE_AFFINE        \
+                                | SD_SERIALIZE,         \
         .last_balance           = jiffies,              \
         .balance_interval       = 64,                   \
 }
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index d4695a3356d0..5f79a5f9de79 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -10,18 +10,19 @@
 #define VIRTIO_BLK_F_SIZE_MAX   1       /* Indicates maximum segment size */
 #define VIRTIO_BLK_F_SEG_MAX    2       /* Indicates maximum # of segments */
 #define VIRTIO_BLK_F_GEOMETRY   4       /* Legacy geometry available  */
+#define VIRTIO_BLK_F_RO         5       /* Disk is read-only */
 
 struct virtio_blk_config
 {
         /* The capacity (in 512-byte sectors). */
-        __le64 capacity;
+        __u64 capacity;
         /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
-        __le32 size_max;
+        __u32 size_max;
         /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
-        __le32 seg_max;
+        __u32 seg_max;
         /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
         struct virtio_blk_geometry {
-                __le16 cylinders;
+                __u16 cylinders;
                 __u8 heads;
                 __u8 sectors;
         } geometry;
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 50db245c81ad..f364bbf63c34 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -15,6 +15,10 @@
 /* We've given up on this device. */
 #define VIRTIO_CONFIG_S_FAILED          0x80
 
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY        24
+
 #ifdef __KERNEL__
 #include <linux/virtio.h>
 
@@ -99,7 +103,7 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev,
  * The return value is -ENOENT if the feature doesn't exist.  Otherwise
  * the config value is copied into whatever is pointed to by v. */
 #define virtio_config_val(vdev, fbit, offset, v) \
-        virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v))
+        virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
 
 static inline int virtio_config_buf(struct virtio_device *vdev,
                                     unsigned int fbit,
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
new file mode 100644
index 000000000000..331afb6c9f62
--- /dev/null
+++ b/include/linux/virtio_rng.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+#include <linux/virtio_config.h>
+
+/* The ID for virtio_rng */
+#define VIRTIO_ID_RNG   4
+
+#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 4d13732e9cf0..6f69968eab24 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -100,6 +100,7 @@
 #define WM9713_ADCSEL_Y         0x0004  /* Y measurement */
 #define WM9713_ADCSEL_PRES      0x0008  /* Pressure measurement */
 #define WM9713_COO              0x0001  /* enable coordinate mode */
+#define WM9713_45W              0x1000  /* set for 5 wire panel */
 #define WM9713_PDEN             0x0800  /* measure only when pen down */
 #define WM9713_ADCSEL_MASK      0x00fe  /* ADC selection mask */
 #define WM9713_WAIT             0x0200  /* coordinate wait */