78 files changed, 5412 insertions, 829 deletions

diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h
new file mode 100644
index 000000000000..1311cefdfd30
--- /dev/null
+++ b/include/asm-powerpc/8xx_immap.h
@@ -0,0 +1,564 @@
+/*
+ * MPC8xx Internal Memory Map
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * The I/O on the MPC860 is comprised of blocks of special registers
+ * and the dual port ram for the Communication Processor Module.
+ * Within this space are functional units such as the SIU, memory
+ * controller, system timers, and other control functions.  It is
+ * a combination that I found difficult to separate into logical
+ * functional files.....but anyone else is welcome to try.  -- Dan
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_8XX__
+#define __IMMAP_8XX__
+
+/* System configuration registers.
+*/
+typedef struct sys_conf {
+        uint    sc_siumcr;
+        uint    sc_sypcr;
+        uint    sc_swt;
+        char    res1[2];
+        ushort  sc_swsr;
+        uint    sc_sipend;
+        uint    sc_simask;
+        uint    sc_siel;
+        uint    sc_sivec;
+        uint    sc_tesr;
+        char    res2[0xc];
+        uint    sc_sdcr;
+        char    res3[0x4c];
+} sysconf8xx_t;
+
+/* PCMCIA configuration registers.
+*/
+typedef struct pcmcia_conf {
+        uint    pcmc_pbr0;
+        uint    pcmc_por0;
+        uint    pcmc_pbr1;
+        uint    pcmc_por1;
+        uint    pcmc_pbr2;
+        uint    pcmc_por2;
+        uint    pcmc_pbr3;
+        uint    pcmc_por3;
+        uint    pcmc_pbr4;
+        uint    pcmc_por4;
+        uint    pcmc_pbr5;
+        uint    pcmc_por5;
+        uint    pcmc_pbr6;
+        uint    pcmc_por6;
+        uint    pcmc_pbr7;
+        uint    pcmc_por7;
+        char    res1[0x20];
+        uint    pcmc_pgcra;
+        uint    pcmc_pgcrb;
+        uint    pcmc_pscr;
+        char    res2[4];
+        uint    pcmc_pipr;
+        char    res3[4];
+        uint    pcmc_per;
+        char    res4[4];
+} pcmconf8xx_t;
+
+/* Memory controller registers.
+*/
+typedef struct  mem_ctlr {
+        uint    memc_br0;
+        uint    memc_or0;
+        uint    memc_br1;
+        uint    memc_or1;
+        uint    memc_br2;
+        uint    memc_or2;
+        uint    memc_br3;
+        uint    memc_or3;
+        uint    memc_br4;
+        uint    memc_or4;
+        uint    memc_br5;
+        uint    memc_or5;
+        uint    memc_br6;
+        uint    memc_or6;
+        uint    memc_br7;
+        uint    memc_or7;
+        char    res1[0x24];
+        uint    memc_mar;
+        uint    memc_mcr;
+        char    res2[4];
+        uint    memc_mamr;
+        uint    memc_mbmr;
+        ushort  memc_mstat;
+        ushort  memc_mptpr;
+        uint    memc_mdr;
+        char    res3[0x80];
+} memctl8xx_t;
+
+/*-----------------------------------------------------------------------
+ * BR - Memory Controler: Base Register                                 16-9
+ */
+#define BR_BA_MSK       0xffff8000      /* Base Address Mask                    */
+#define BR_AT_MSK       0x00007000      /* Address Type Mask                    */
+#define BR_PS_MSK       0x00000c00      /* Port Size Mask                       */
+#define BR_PS_32        0x00000000      /* 32 bit port size                     */
+#define BR_PS_16        0x00000800      /* 16 bit port size                     */
+#define BR_PS_8         0x00000400      /*  8 bit port size                     */
+#define BR_PARE         0x00000200      /* Parity Enable                        */
+#define BR_WP           0x00000100      /* Write Protect                        */
+#define BR_MS_MSK       0x000000c0      /* Machine Select Mask                  */
+#define BR_MS_GPCM      0x00000000      /* G.P.C.M. Machine Select              */
+#define BR_MS_UPMA      0x00000080      /* U.P.M.A Machine Select               */
+#define BR_MS_UPMB      0x000000c0      /* U.P.M.B Machine Select               */
+#define BR_V            0x00000001      /* Bank Valid                           */
+
+/*-----------------------------------------------------------------------
+ * OR - Memory Controler: Option Register                               16-11
+ */
+#define OR_AM_MSK       0xffff8000      /* Address Mask Mask                    */
+#define OR_ATM_MSK      0x00007000      /* Address Type Mask Mask               */
+#define OR_CSNT_SAM     0x00000800      /* Chip Select Negation Time/ Start     */
+                                        /* Address Multiplex                    */
+#define OR_ACS_MSK      0x00000600      /* Address to Chip Select Setup mask    */
+#define OR_ACS_DIV1     0x00000000      /* CS is output at the same time        */
+#define OR_ACS_DIV4     0x00000400      /* CS is output 1/4 a clock later       */
+#define OR_ACS_DIV2     0x00000600      /* CS is output 1/2 a clock later       */
+#define OR_G5LA         0x00000400      /* Output #GPL5 on #GPL_A5              */
+#define OR_G5LS         0x00000200      /* Drive #GPL high on falling edge of...*/
+#define OR_BI           0x00000100      /* Burst inhibit                        */
+#define OR_SCY_MSK      0x000000f0      /* Cycle Lenght in Clocks               */
+#define OR_SCY_0_CLK    0x00000000      /* 0 clock cycles wait states           */
+#define OR_SCY_1_CLK    0x00000010      /* 1 clock cycles wait states           */
+#define OR_SCY_2_CLK    0x00000020      /* 2 clock cycles wait states           */
+#define OR_SCY_3_CLK    0x00000030      /* 3 clock cycles wait states           */
+#define OR_SCY_4_CLK    0x00000040      /* 4 clock cycles wait states           */
+#define OR_SCY_5_CLK    0x00000050      /* 5 clock cycles wait states           */
+#define OR_SCY_6_CLK    0x00000060      /* 6 clock cycles wait states           */
+#define OR_SCY_7_CLK    0x00000070      /* 7 clock cycles wait states           */
+#define OR_SCY_8_CLK    0x00000080      /* 8 clock cycles wait states           */
+#define OR_SCY_9_CLK    0x00000090      /* 9 clock cycles wait states           */
+#define OR_SCY_10_CLK   0x000000a0      /* 10 clock cycles wait states          */
+#define OR_SCY_11_CLK   0x000000b0      /* 11 clock cycles wait states          */
+#define OR_SCY_12_CLK   0x000000c0      /* 12 clock cycles wait states          */
+#define OR_SCY_13_CLK   0x000000d0      /* 13 clock cycles wait states          */
+#define OR_SCY_14_CLK   0x000000e0      /* 14 clock cycles wait states          */
+#define OR_SCY_15_CLK   0x000000f0      /* 15 clock cycles wait states          */
+#define OR_SETA         0x00000008      /* External Transfer Acknowledge        */
+#define OR_TRLX         0x00000004      /* Timing Relaxed                       */
+#define OR_EHTR         0x00000002      /* Extended Hold Time on Read           */
+
+/* System Integration Timers.
+*/
+typedef struct  sys_int_timers {
+        ushort  sit_tbscr;
+        char    res0[0x02];
+        uint    sit_tbreff0;
+        uint    sit_tbreff1;
+        char    res1[0x14];
+        ushort  sit_rtcsc;
+        char    res2[0x02];
+        uint    sit_rtc;
+        uint    sit_rtsec;
+        uint    sit_rtcal;
+        char    res3[0x10];
+        ushort  sit_piscr;
+        char    res4[2];
+        uint    sit_pitc;
+        uint    sit_pitr;
+        char    res5[0x34];
+} sit8xx_t;
+
+#define TBSCR_TBIRQ_MASK        ((ushort)0xff00)
+#define TBSCR_REFA              ((ushort)0x0080)
+#define TBSCR_REFB              ((ushort)0x0040)
+#define TBSCR_REFAE             ((ushort)0x0008)
+#define TBSCR_REFBE             ((ushort)0x0004)
+#define TBSCR_TBF               ((ushort)0x0002)
+#define TBSCR_TBE               ((ushort)0x0001)
+
+#define RTCSC_RTCIRQ_MASK       ((ushort)0xff00)
+#define RTCSC_SEC               ((ushort)0x0080)
+#define RTCSC_ALR               ((ushort)0x0040)
+#define RTCSC_38K               ((ushort)0x0010)
+#define RTCSC_SIE               ((ushort)0x0008)
+#define RTCSC_ALE               ((ushort)0x0004)
+#define RTCSC_RTF               ((ushort)0x0002)
+#define RTCSC_RTE               ((ushort)0x0001)
+
+#define PISCR_PIRQ_MASK         ((ushort)0xff00)
+#define PISCR_PS                ((ushort)0x0080)
+#define PISCR_PIE               ((ushort)0x0004)
+#define PISCR_PTF               ((ushort)0x0002)
+#define PISCR_PTE               ((ushort)0x0001)
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+        uint    car_sccr;
+        uint    car_plprcr;
+        uint    car_rsr;
+        char    res[0x74];        /* Reserved area                  */
+} car8xx_t;
+
+/* System Integration Timers keys.
+*/
+typedef struct sitk {
+        uint    sitk_tbscrk;
+        uint    sitk_tbreff0k;
+        uint    sitk_tbreff1k;
+        uint    sitk_tbk;
+        char    res1[0x10];
+        uint    sitk_rtcsck;
+        uint    sitk_rtck;
+        uint    sitk_rtseck;
+        uint    sitk_rtcalk;
+        char    res2[0x10];
+        uint    sitk_piscrk;
+        uint    sitk_pitck;
+        char    res3[0x38];
+} sitk8xx_t;
+
+/* Clocks and reset keys.
+*/
+typedef struct cark {
+        uint    cark_sccrk;
+        uint    cark_plprcrk;
+        uint    cark_rsrk;
+        char    res[0x474];
+} cark8xx_t;
+
+/* The key to unlock registers maintained by keep-alive power.
+*/
+#define KAPWR_KEY       ((unsigned int)0x55ccaa33)
+
+/* Video interface.  MPC823 Only.
+*/
+typedef struct vid823 {
+        ushort  vid_vccr;
+        ushort  res1;
+        u_char  vid_vsr;
+        u_char  res2;
+        u_char  vid_vcmr;
+        u_char  res3;
+        uint    vid_vbcb;
+        uint    res4;
+        uint    vid_vfcr0;
+        uint    vid_vfaa0;
+        uint    vid_vfba0;
+        uint    vid_vfcr1;
+        uint    vid_vfaa1;
+        uint    vid_vfba1;
+        u_char  res5[0x18];
+} vid823_t;
+
+/* LCD interface.  823 Only.
+*/
+typedef struct lcd {
+        uint    lcd_lccr;
+        uint    lcd_lchcr;
+        uint    lcd_lcvcr;
+        char    res1[4];
+        uint    lcd_lcfaa;
+        uint    lcd_lcfba;
+        char    lcd_lcsr;
+        char    res2[0x7];
+} lcd823_t;
+
+/* I2C
+*/
+typedef struct i2c {
+        u_char  i2c_i2mod;
+        char    res1[3];
+        u_char  i2c_i2add;
+        char    res2[3];
+        u_char  i2c_i2brg;
+        char    res3[3];
+        u_char  i2c_i2com;
+        char    res4[3];
+        u_char  i2c_i2cer;
+        char    res5[3];
+        u_char  i2c_i2cmr;
+        char    res6[0x8b];
+} i2c8xx_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+        char    res1[4];
+        uint    sdma_sdar;
+        u_char  sdma_sdsr;
+        char    res3[3];
+        u_char  sdma_sdmr;
+        char    res4[3];
+        u_char  sdma_idsr1;
+        char    res5[3];
+        u_char  sdma_idmr1;
+        char    res6[3];
+        u_char  sdma_idsr2;
+        char    res7[3];
+        u_char  sdma_idmr2;
+        char    res8[0x13];
+} sdma8xx_t;
+
+/* Communication Processor Module Interrupt Controller.
+*/
+typedef struct cpm_ic {
+        ushort  cpic_civr;
+        char    res[0xe];
+        uint    cpic_cicr;
+        uint    cpic_cipr;
+        uint    cpic_cimr;
+        uint    cpic_cisr;
+} cpic8xx_t;
+
+/* Input/Output Port control/status registers.
+*/
+typedef struct io_port {
+        ushort  iop_padir;
+        ushort  iop_papar;
+        ushort  iop_paodr;
+        ushort  iop_padat;
+        char    res1[8];
+        ushort  iop_pcdir;
+        ushort  iop_pcpar;
+        ushort  iop_pcso;
+        ushort  iop_pcdat;
+        ushort  iop_pcint;
+        char    res2[6];
+        ushort  iop_pddir;
+        ushort  iop_pdpar;
+        char    res3[2];
+        ushort  iop_pddat;
+        uint    utmode;
+        char    res4[4];
+} iop8xx_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+        ushort  cpmt_tgcr;
+        char    res1[0xe];
+        ushort  cpmt_tmr1;
+        ushort  cpmt_tmr2;
+        ushort  cpmt_trr1;
+        ushort  cpmt_trr2;
+        ushort  cpmt_tcr1;
+        ushort  cpmt_tcr2;
+        ushort  cpmt_tcn1;
+        ushort  cpmt_tcn2;
+        ushort  cpmt_tmr3;
+        ushort  cpmt_tmr4;
+        ushort  cpmt_trr3;
+        ushort  cpmt_trr4;
+        ushort  cpmt_tcr3;
+        ushort  cpmt_tcr4;
+        ushort  cpmt_tcn3;
+        ushort  cpmt_tcn4;
+        ushort  cpmt_ter1;
+        ushort  cpmt_ter2;
+        ushort  cpmt_ter3;
+        ushort  cpmt_ter4;
+        char    res2[8];
+} cpmtimer8xx_t;
+
+/* Finally, the Communication Processor stuff.....
+*/
+typedef struct scc {            /* Serial communication channels */
+        uint    scc_gsmrl;
+        uint    scc_gsmrh;
+        ushort  scc_psmr;
+        char    res1[2];
+        ushort  scc_todr;
+        ushort  scc_dsr;
+        ushort  scc_scce;
+        char    res2[2];
+        ushort  scc_sccm;
+        char    res3;
+        u_char  scc_sccs;
+        char    res4[8];
+} scc_t;
+
+typedef struct smc {            /* Serial management channels */
+        char    res1[2];
+        ushort  smc_smcmr;
+        char    res2[2];
+        u_char  smc_smce;
+        char    res3[3];
+        u_char  smc_smcm;
+        char    res4[5];
+} smc_t;
+
+/* MPC860T Fast Ethernet Controller.  It isn't part of the CPM, but
+ * it fits within the address space.
+ */
+
+typedef struct fec {
+        uint    fec_addr_low;           /* lower 32 bits of station address     */
+        ushort  fec_addr_high;          /* upper 16 bits of station address     */
+        ushort  res1;                   /* reserved                             */
+        uint    fec_hash_table_high;    /* upper 32-bits of hash table          */
+        uint    fec_hash_table_low;     /* lower 32-bits of hash table          */
+        uint    fec_r_des_start;        /* beginning of Rx descriptor ring      */
+        uint    fec_x_des_start;        /* beginning of Tx descriptor ring      */
+        uint    fec_r_buff_size;        /* Rx buffer size                       */
+        uint    res2[9];                /* reserved                             */
+        uint    fec_ecntrl;             /* ethernet control register            */
+        uint    fec_ievent;             /* interrupt event register             */
+        uint    fec_imask;              /* interrupt mask register              */
+        uint    fec_ivec;               /* interrupt level and vector status    */
+        uint    fec_r_des_active;       /* Rx ring updated flag                 */
+        uint    fec_x_des_active;       /* Tx ring updated flag                 */
+        uint    res3[10];               /* reserved                             */
+        uint    fec_mii_data;           /* MII data register                    */
+        uint    fec_mii_speed;          /* MII speed control register           */
+        uint    res4[17];               /* reserved                             */
+        uint    fec_r_bound;            /* end of RAM (read-only)               */
+        uint    fec_r_fstart;           /* Rx FIFO start address                */
+        uint    res5[6];                /* reserved                             */
+        uint    fec_x_fstart;           /* Tx FIFO start address                */
+        uint    res6[17];               /* reserved                             */
+        uint    fec_fun_code;           /* fec SDMA function code               */
+        uint    res7[3];                /* reserved                             */
+        uint    fec_r_cntrl;            /* Rx control register                  */
+        uint    fec_r_hash;             /* Rx hash register                     */
+        uint    res8[14];               /* reserved                             */
+        uint    fec_x_cntrl;            /* Tx control register                  */
+        uint    res9[0x1e];             /* reserved                             */
+} fec_t;
+
+/* The FEC and LCD color map share the same address space....
+ * I guess we will never see an 823T :-).
+ */
+union fec_lcd {
+        fec_t   fl_un_fec;
+        u_char  fl_un_cmap[0x200];
+};
+
+typedef struct comm_proc {
+        /* General control and status registers.
+        */
+        ushort  cp_cpcr;
+        u_char  res1[2];
+        ushort  cp_rccr;
+        u_char  res2;
+        u_char  cp_rmds;
+        u_char  res3[4];
+        ushort  cp_cpmcr1;
+        ushort  cp_cpmcr2;
+        ushort  cp_cpmcr3;
+        ushort  cp_cpmcr4;
+        u_char  res4[2];
+        ushort  cp_rter;
+        u_char  res5[2];
+        ushort  cp_rtmr;
+        u_char  res6[0x14];
+
+        /* Baud rate generators.
+        */
+        uint    cp_brgc1;
+        uint    cp_brgc2;
+        uint    cp_brgc3;
+        uint    cp_brgc4;
+
+        /* Serial Communication Channels.
+        */
+        scc_t   cp_scc[4];
+
+        /* Serial Management Channels.
+        */
+        smc_t   cp_smc[2];
+
+        /* Serial Peripheral Interface.
+        */
+        ushort  cp_spmode;
+        u_char  res7[4];
+        u_char  cp_spie;
+        u_char  res8[3];
+        u_char  cp_spim;
+        u_char  res9[2];
+        u_char  cp_spcom;
+        u_char  res10[2];
+
+        /* Parallel Interface Port.
+        */
+        u_char  res11[2];
+        ushort  cp_pipc;
+        u_char  res12[2];
+        ushort  cp_ptpr;
+        uint    cp_pbdir;
+        uint    cp_pbpar;
+        u_char  res13[2];
+        ushort  cp_pbodr;
+        uint    cp_pbdat;
+
+        /* Port E - MPC87x/88x only.
+         */
+        uint    cp_pedir;
+        uint    cp_pepar;
+        uint    cp_peso;
+        uint    cp_peodr;
+        uint    cp_pedat;
+
+        /* Communications Processor Timing Register -
+           Contains RMII Timing for the FECs on MPC87x/88x only.
+        */
+        uint    cp_cptr;
+
+        /* Serial Interface and Time Slot Assignment.
+        */
+        uint    cp_simode;
+        u_char  cp_sigmr;
+        u_char  res15;
+        u_char  cp_sistr;
+        u_char  cp_sicmr;
+        u_char  res16[4];
+        uint    cp_sicr;
+        uint    cp_sirp;
+        u_char  res17[0xc];
+
+        /* 256 bytes of MPC823 video controller RAM array.
+        */
+        u_char  cp_vcram[0x100];
+        u_char  cp_siram[0x200];
+
+        /* The fast ethernet controller is not really part of the CPM,
+         * but it resides in the address space.
+         * The LCD color map is also here.
+         */
+        union   fec_lcd fl_un;
+#define cp_fec          fl_un.fl_un_fec
+#define lcd_cmap        fl_un.fl_un_cmap
+        char    res18[0xE00];
+
+        /* The DUET family has a second FEC here */
+        fec_t   cp_fec2;
+#define cp_fec1 cp_fec  /* consistency macro */
+
+        /* Dual Ported RAM follows.
+         * There are many different formats for this memory area
+         * depending upon the devices used and options chosen.
+         * Some processors don't have all of it populated.
+         */
+        u_char  cp_dpmem[0x1C00];       /* BD / Data / ucode */
+        u_char  cp_dparam[0x400];       /* Parameter RAM */
+} cpm8xx_t;
+
+/* Internal memory map.
+*/
+typedef struct immap {
+        sysconf8xx_t    im_siu_conf;    /* SIU Configuration */
+        pcmconf8xx_t    im_pcmcia;      /* PCMCIA Configuration */
+        memctl8xx_t     im_memctl;      /* Memory Controller */
+        sit8xx_t        im_sit;         /* System integration timers */
+        car8xx_t        im_clkrst;      /* Clocks and reset */
+        sitk8xx_t       im_sitk;        /* Sys int timer keys */
+        cark8xx_t       im_clkrstk;     /* Clocks and reset keys */
+        vid823_t        im_vid;         /* Video (823 only) */
+        lcd823_t        im_lcd;         /* LCD (823 only) */
+        i2c8xx_t        im_i2c;         /* I2C control/status */
+        sdma8xx_t       im_sdma;        /* SDMA control/status */
+        cpic8xx_t       im_cpic;        /* CPM Interrupt Controller */
+        iop8xx_t        im_ioport;      /* IO Port control/status */
+        cpmtimer8xx_t   im_cpmtimer;    /* CPM timers */
+        cpm8xx_t        im_cpm;         /* Communication processor */
+} immap_t;
+
+#endif /* __IMMAP_8XX__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h
index c44810b9d322..f3fc733758f5 100644
--- a/include/asm-powerpc/atomic.h
+++ b/include/asm-powerpc/atomic.h
@@ -5,7 +5,7 @@
  * PowerPC atomic operations
  */
 
-typedef struct { volatile int counter; } atomic_t;
+typedef struct { int counter; } atomic_t;
 
 #ifdef __KERNEL__
 #include <linux/compiler.h>
@@ -15,8 +15,19 @@ typedef struct { volatile int counter; } atomic_t;
 
 #define ATOMIC_INIT(i)          { (i) }
 
-#define atomic_read(v)          ((v)->counter)
-#define atomic_set(v,i)         (((v)->counter) = (i))
+static __inline__ int atomic_read(const atomic_t *v)
+{
+        int t;
+
+        __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
+
+        return t;
+}
+
+static __inline__ void atomic_set(atomic_t *v, int i)
+{
+        __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
+}
 
 static __inline__ void atomic_add(int a, atomic_t *v)
 {
@@ -240,12 +251,23 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 
 #ifdef __powerpc64__
 
-typedef struct { volatile long counter; } atomic64_t;
+typedef struct { long counter; } atomic64_t;
 
 #define ATOMIC64_INIT(i)        { (i) }
 
-#define atomic64_read(v)        ((v)->counter)
-#define atomic64_set(v,i)       (((v)->counter) = (i))
+static __inline__ long atomic64_read(const atomic64_t *v)
+{
+        long t;
+
+        __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
+
+        return t;
+}
+
+static __inline__ void atomic64_set(atomic64_t *v, long i)
+{
+        __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
+}
 
 static __inline__ void atomic64_add(long a, atomic64_t *v)
 {
diff --git a/include/asm-powerpc/cell-regs.h b/include/asm-powerpc/cell-regs.h
new file mode 100644
index 000000000000..fd6fd00434ef
--- /dev/null
+++ b/include/asm-powerpc/cell-regs.h
@@ -0,0 +1,315 @@
+/*
+ * cbe_regs.h
+ *
+ * This file is intended to hold the various register definitions for CBE
+ * on-chip system devices (memory controller, IO controller, etc...)
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Authors: Maximino Aguilar (maguilar@us.ibm.com)
+ *          David J. Erb (djerb@us.ibm.com)
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+#ifndef CBE_REGS_H
+#define CBE_REGS_H
+
+#include <asm/cell-pmu.h>
+
+/*
+ *
+ * Some HID register definitions
+ *
+ */
+
+/* CBE specific HID0 bits */
+#define HID0_CBE_THERM_WAKEUP   0x0000020000000000ul
+#define HID0_CBE_SYSERR_WAKEUP  0x0000008000000000ul
+#define HID0_CBE_THERM_INT_EN   0x0000000400000000ul
+#define HID0_CBE_SYSERR_INT_EN  0x0000000200000000ul
+
+#define MAX_CBE         2
+
+/*
+ *
+ * Pervasive unit register definitions
+ *
+ */
+
+union spe_reg {
+        u64 val;
+        u8 spe[8];
+};
+
+union ppe_spe_reg {
+        u64 val;
+        struct {
+                u32 ppe;
+                u32 spe;
+        };
+};
+
+
+struct cbe_pmd_regs {
+        /* Debug Bus Control */
+        u64     pad_0x0000;                                     /* 0x0000 */
+
+        u64     group_control;                                  /* 0x0008 */
+
+        u8      pad_0x0010_0x00a8 [0x00a8 - 0x0010];            /* 0x0010 */
+
+        u64     debug_bus_control;                              /* 0x00a8 */
+
+        u8      pad_0x00b0_0x0100 [0x0100 - 0x00b0];            /* 0x00b0 */
+
+        u64     trace_aux_data;                                 /* 0x0100 */
+        u64     trace_buffer_0_63;                              /* 0x0108 */
+        u64     trace_buffer_64_127;                            /* 0x0110 */
+        u64     trace_address;                                  /* 0x0118 */
+        u64     ext_tr_timer;                                   /* 0x0120 */
+
+        u8      pad_0x0128_0x0400 [0x0400 - 0x0128];            /* 0x0128 */
+
+        /* Performance Monitor */
+        u64     pm_status;                                      /* 0x0400 */
+        u64     pm_control;                                     /* 0x0408 */
+        u64     pm_interval;                                    /* 0x0410 */
+        u64     pm_ctr[4];                                      /* 0x0418 */
+        u64     pm_start_stop;                                  /* 0x0438 */
+        u64     pm07_control[8];                                /* 0x0440 */
+
+        u8      pad_0x0480_0x0800 [0x0800 - 0x0480];            /* 0x0480 */
+
+        /* Thermal Sensor Registers */
+        union   spe_reg ts_ctsr1;                               /* 0x0800 */
+        u64     ts_ctsr2;                                       /* 0x0808 */
+        union   spe_reg ts_mtsr1;                               /* 0x0810 */
+        u64     ts_mtsr2;                                       /* 0x0818 */
+        union   spe_reg ts_itr1;                                /* 0x0820 */
+        u64     ts_itr2;                                        /* 0x0828 */
+        u64     ts_gitr;                                        /* 0x0830 */
+        u64     ts_isr;                                         /* 0x0838 */
+        u64     ts_imr;                                         /* 0x0840 */
+        union   spe_reg tm_cr1;                                 /* 0x0848 */
+        u64     tm_cr2;                                         /* 0x0850 */
+        u64     tm_simr;                                        /* 0x0858 */
+        union   ppe_spe_reg tm_tpr;                             /* 0x0860 */
+        union   spe_reg tm_str1;                                /* 0x0868 */
+        u64     tm_str2;                                        /* 0x0870 */
+        union   ppe_spe_reg tm_tsr;                             /* 0x0878 */
+
+        /* Power Management */
+        u64     pmcr;                                           /* 0x0880 */
+#define CBE_PMD_PAUSE_ZERO_CONTROL      0x10000
+        u64     pmsr;                                           /* 0x0888 */
+
+        /* Time Base Register */
+        u64     tbr;                                            /* 0x0890 */
+
+        u8      pad_0x0898_0x0c00 [0x0c00 - 0x0898];            /* 0x0898 */
+
+        /* Fault Isolation Registers */
+        u64     checkstop_fir;                                  /* 0x0c00 */
+        u64     recoverable_fir;                                /* 0x0c08 */
+        u64     spec_att_mchk_fir;                              /* 0x0c10 */
+        u32     fir_mode_reg;                                   /* 0x0c18 */
+        u8      pad_0x0c1c_0x0c20 [4];                          /* 0x0c1c */
+#define CBE_PMD_FIR_MODE_M8             0x00800
+        u64     fir_enable_mask;                                /* 0x0c20 */
+
+        u8      pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];            /* 0x0c28 */
+        u64     ras_esc_0;                                      /* 0x0ca8 */
+        u8      pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];            /* 0x0cb0 */
+};
+
+extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
+extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
+
+/*
+ * PMU shadow registers
+ *
+ * Many of the registers in the performance monitoring unit are write-only,
+ * so we need to save a copy of what we write to those registers.
+ *
+ * The actual data counters are read/write. However, writing to the counters
+ * only takes effect if the PMU is enabled. Otherwise the value is stored in
+ * a hardware latch until the next time the PMU is enabled. So we save a copy
+ * of the counter values if we need to read them back while the PMU is
+ * disabled. The counter_value_in_latch field is a bitmap indicating which
+ * counters currently have a value waiting to be written.
+ */
+
+struct cbe_pmd_shadow_regs {
+        u32 group_control;
+        u32 debug_bus_control;
+        u32 trace_address;
+        u32 ext_tr_timer;
+        u32 pm_status;
+        u32 pm_control;
+        u32 pm_interval;
+        u32 pm_start_stop;
+        u32 pm07_control[NR_CTRS];
+
+        u32 pm_ctr[NR_PHYS_CTRS];
+        u32 counter_value_in_latch;
+};
+
+extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
+extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
+
+/*
+ *
+ * IIC unit register definitions
+ *
+ */
+
+struct cbe_iic_pending_bits {
+        u32 data;
+        u8 flags;
+        u8 class;
+        u8 source;
+        u8 prio;
+};
+
+#define CBE_IIC_IRQ_VALID       0x80
+#define CBE_IIC_IRQ_IPI         0x40
+
+struct cbe_iic_thread_regs {
+        struct cbe_iic_pending_bits pending;
+        struct cbe_iic_pending_bits pending_destr;
+        u64 generate;
+        u64 prio;
+};
+
+struct cbe_iic_regs {
+        u8      pad_0x0000_0x0400[0x0400 - 0x0000];             /* 0x0000 */
+
+        /* IIC interrupt registers */
+        struct  cbe_iic_thread_regs thread[2];                  /* 0x0400 */
+
+        u64     iic_ir;                                         /* 0x0440 */
+#define CBE_IIC_IR_PRIO(x)      (((x) & 0xf) << 12)
+#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
+#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
+#define CBE_IIC_IR_IOC_0        0x0
+#define CBE_IIC_IR_IOC_1S       0xb
+#define CBE_IIC_IR_PT_0         0xe
+#define CBE_IIC_IR_PT_1         0xf
+
+        u64     iic_is;                                         /* 0x0448 */
+#define CBE_IIC_IS_PMI          0x2
+
+        u8      pad_0x0450_0x0500[0x0500 - 0x0450];             /* 0x0450 */
+
+        /* IOC FIR */
+        u64     ioc_fir_reset;                                  /* 0x0500 */
+        u64     ioc_fir_set;                                    /* 0x0508 */
+        u64     ioc_checkstop_enable;                           /* 0x0510 */
+        u64     ioc_fir_error_mask;                             /* 0x0518 */
+        u64     ioc_syserr_enable;                              /* 0x0520 */
+        u64     ioc_fir;                                        /* 0x0528 */
+
+        u8      pad_0x0530_0x1000[0x1000 - 0x0530];             /* 0x0530 */
+};
+
+extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
+extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
+
+
+struct cbe_mic_tm_regs {
+        u8      pad_0x0000_0x0040[0x0040 - 0x0000];             /* 0x0000 */
+
+        u64     mic_ctl_cnfg2;                                  /* 0x0040 */
+#define CBE_MIC_ENABLE_AUX_TRC          0x8000000000000000LL
+#define CBE_MIC_DISABLE_PWR_SAV_2       0x0200000000000000LL
+#define CBE_MIC_DISABLE_AUX_TRC_WRAP    0x0100000000000000LL
+#define CBE_MIC_ENABLE_AUX_TRC_INT      0x0080000000000000LL
+
+        u64     pad_0x0048;                                     /* 0x0048 */
+
+        u64     mic_aux_trc_base;                               /* 0x0050 */
+        u64     mic_aux_trc_max_addr;                           /* 0x0058 */
+        u64     mic_aux_trc_cur_addr;                           /* 0x0060 */
+        u64     mic_aux_trc_grf_addr;                           /* 0x0068 */
+        u64     mic_aux_trc_grf_data;                           /* 0x0070 */
+
+        u64     pad_0x0078;                                     /* 0x0078 */
+
+        u64     mic_ctl_cnfg_0;                                 /* 0x0080 */
+#define CBE_MIC_DISABLE_PWR_SAV_0       0x8000000000000000LL
+
+        u64     pad_0x0088;                                     /* 0x0088 */
+
+        u64     slow_fast_timer_0;                              /* 0x0090 */
+        u64     slow_next_timer_0;                              /* 0x0098 */
+
+        u8      pad_0x00a0_0x00f8[0x00f8 - 0x00a0];             /* 0x00a0 */
+        u64     mic_df_ecc_address_0;                           /* 0x00f8 */
+
+        u8      pad_0x0100_0x01b8[0x01b8 - 0x0100];             /* 0x0100 */
+        u64     mic_df_ecc_address_1;                           /* 0x01b8 */
+
+        u64     mic_ctl_cnfg_1;                                 /* 0x01c0 */
+#define CBE_MIC_DISABLE_PWR_SAV_1       0x8000000000000000LL
+
+        u64     pad_0x01c8;                                     /* 0x01c8 */
+
+        u64     slow_fast_timer_1;                              /* 0x01d0 */
+        u64     slow_next_timer_1;                              /* 0x01d8 */
+
+        u8      pad_0x01e0_0x0208[0x0208 - 0x01e0];             /* 0x01e0 */
+        u64     mic_exc;                                        /* 0x0208 */
+#define CBE_MIC_EXC_BLOCK_SCRUB         0x0800000000000000ULL
+#define CBE_MIC_EXC_FAST_SCRUB          0x0100000000000000ULL
+
+        u64     mic_mnt_cfg;                                    /* 0x0210 */
+#define CBE_MIC_MNT_CFG_CHAN_0_POP      0x0002000000000000ULL
+#define CBE_MIC_MNT_CFG_CHAN_1_POP      0x0004000000000000ULL
+
+        u64     mic_df_config;                                  /* 0x0218 */
+#define CBE_MIC_ECC_DISABLE_0           0x4000000000000000ULL
+#define CBE_MIC_ECC_REP_SINGLE_0        0x2000000000000000ULL
+#define CBE_MIC_ECC_DISABLE_1           0x0080000000000000ULL
+#define CBE_MIC_ECC_REP_SINGLE_1        0x0040000000000000ULL
+
+        u8      pad_0x0220_0x0230[0x0230 - 0x0220];             /* 0x0220 */
+        u64     mic_fir;                                        /* 0x0230 */
+#define CBE_MIC_FIR_ECC_SINGLE_0_ERR    0x0200000000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_ERR     0x0100000000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_ERR    0x0080000000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_ERR     0x0040000000000000ULL
+#define CBE_MIC_FIR_ECC_ERR_MASK        0xffff000000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_CTE    0x0000020000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_CTE     0x0000010000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_CTE    0x0000008000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_CTE     0x0000004000000000ULL
+#define CBE_MIC_FIR_ECC_CTE_MASK        0x0000ffff00000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_RESET  0x0000000002000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_RESET   0x0000000001000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_RESET  0x0000000000800000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_RESET   0x0000000000400000ULL
+#define CBE_MIC_FIR_ECC_RESET_MASK      0x00000000ffff0000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_SET    0x0000000000000200ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_SET     0x0000000000000100ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_SET    0x0000000000000080ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_SET     0x0000000000000040ULL
+#define CBE_MIC_FIR_ECC_SET_MASK        0x000000000000ffffULL
+        u64     mic_fir_debug;                                  /* 0x0238 */
+
+        u8      pad_0x0240_0x1000[0x1000 - 0x0240];             /* 0x0240 */
+};
+
+extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
+extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
+
+/* some utility functions to deal with SMT */
+extern u32 cbe_get_hw_thread_id(int cpu);
+extern u32 cbe_cpu_to_node(int cpu);
+extern u32 cbe_node_to_cpu(int node);
+
+/* Init this module early */
+extern void cbe_regs_init(void);
+
+
+#endif /* CBE_REGS_H */
diff --git a/include/asm-powerpc/clk_interface.h b/include/asm-powerpc/clk_interface.h
new file mode 100644
index 000000000000..ab1882c1e176
--- /dev/null
+++ b/include/asm-powerpc/clk_interface.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_POWERPC_CLK_INTERFACE_H
+#define __ASM_POWERPC_CLK_INTERFACE_H
+
+#include <linux/clk.h>
+
+struct clk_interface {
+        struct clk*     (*clk_get)      (struct device *dev, const char *id);
+        int             (*clk_enable)   (struct clk *clk);
+        void            (*clk_disable)  (struct clk *clk);
+        unsigned long   (*clk_get_rate) (struct clk *clk);
+        void            (*clk_put)      (struct clk *clk);
+        long            (*clk_round_rate) (struct clk *clk, unsigned long rate);
+        int             (*clk_set_rate) (struct clk *clk, unsigned long rate);
+        int             (*clk_set_parent) (struct clk *clk, struct clk *parent);
+        struct clk*     (*clk_get_parent) (struct clk *clk);
+};
+
+extern struct clk_interface clk_functions;
+
+#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
new file mode 100644
index 000000000000..0307c84a5c1d
--- /dev/null
+++ b/include/asm-powerpc/commproc.h
@@ -0,0 +1,755 @@
+/*
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * throught the MPC8xx internal memory map.  See immap.h for details.
+ * This file only contains what I need for the moment, not the total
+ * CPM capabilities.  I (or someone else) will add definitions as they
+ * are needed.  -- Dan
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_8XX__
+#define __CPM_8XX__
+
+#include <asm/8xx_immap.h>
+#include <asm/ptrace.h>
+#include <asm/cpm.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST      ((ushort)0x8000)
+#define CPM_CR_OPCODE   ((ushort)0x0f00)
+#define CPM_CR_CHAN     ((ushort)0x00f0)
+#define CPM_CR_FLG      ((ushort)0x0001)
+
+/* Some commands (there are more...later)
+*/
+#define CPM_CR_INIT_TRX         ((ushort)0x0000)
+#define CPM_CR_INIT_RX          ((ushort)0x0001)
+#define CPM_CR_INIT_TX          ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE        ((ushort)0x0003)
+#define CPM_CR_STOP_TX          ((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX      ((ushort)0x0005)
+#define CPM_CR_RESTART_TX       ((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD      ((ushort)0x0007)
+#define CPM_CR_SET_GADDR        ((ushort)0x0008)
+#define CPM_CR_SET_TIMER        CPM_CR_SET_GADDR
+
+/* Channel numbers.
+*/
+#define CPM_CR_CH_SCC1          ((ushort)0x0000)
+#define CPM_CR_CH_I2C           ((ushort)0x0001)        /* I2C and IDMA1 */
+#define CPM_CR_CH_SCC2          ((ushort)0x0004)
+#define CPM_CR_CH_SPI           ((ushort)0x0005)        /* SPI / IDMA2 / Timers */
+#define CPM_CR_CH_TIMER         CPM_CR_CH_SPI
+#define CPM_CR_CH_SCC3          ((ushort)0x0008)
+#define CPM_CR_CH_SMC1          ((ushort)0x0009)        /* SMC1 / DSP1 */
+#define CPM_CR_CH_SCC4          ((ushort)0x000c)
+#define CPM_CR_CH_SMC2          ((ushort)0x000d)        /* SMC2 / DSP2 */
+
+#define mk_cr_cmd(CH, CMD)      ((CMD << 8) | (CH << 4))
+
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
+/* The dual ported RAM is multi-functional.  Some areas can be (and are
+ * being) used for microcode.  There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+#define CPM_DATAONLY_BASE       ((uint)0x0800)
+#define CPM_DATAONLY_SIZE       ((uint)0x0700)
+#define CPM_DP_NOSPACE          ((uint)0x7fffffff)
+#endif
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#define cpm_dpram_phys cpm_muram_dma
+#else
+extern unsigned long cpm_dpalloc(uint size, uint align);
+extern int cpm_dpfree(unsigned long offset);
+extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
+extern void cpm_dpdump(void);
+extern void *cpm_dpram_addr(unsigned long offset);
+extern uint cpm_dpram_phys(u8* addr);
+#endif
+
+extern void cpm_setbrg(uint brg, uint rate);
+
+extern uint m8xx_cpm_hostalloc(uint size);
+extern int  m8xx_cpm_hostfree(uint start);
+extern void m8xx_cpm_hostdump(void);
+
+extern void cpm_load_patch(volatile immap_t *immr);
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+        ushort  cbd_sc;         /* Status and Control */
+        ushort  cbd_datlen;     /* Data length in buffer */
+        uint    cbd_bufaddr;    /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
+#define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
+#define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
+#define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
+#define BD_SC_LAST      ((ushort)0x0800)        /* Last buffer in frame */
+#define BD_SC_TC        ((ushort)0x0400)        /* Transmit CRC */
+#define BD_SC_CM        ((ushort)0x0200)        /* Continous mode */
+#define BD_SC_ID        ((ushort)0x0100)        /* Rec'd too many idles */
+#define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
+#define BD_SC_BR        ((ushort)0x0020)        /* Break received */
+#define BD_SC_FR        ((ushort)0x0010)        /* Framing error */
+#define BD_SC_PR        ((ushort)0x0008)        /* Parity error */
+#define BD_SC_NAK       ((ushort)0x0004)        /* NAK - did not respond */
+#define BD_SC_OV        ((ushort)0x0002)        /* Overrun */
+#define BD_SC_UN        ((ushort)0x0002)        /* Underrun */
+#define BD_SC_CD        ((ushort)0x0001)        /* ?? */
+#define BD_SC_CL        ((ushort)0x0001)        /* Collision */
+
+/* Parameter RAM offsets.
+*/
+#define PROFF_SCC1      ((uint)0x0000)
+#define PROFF_IIC       ((uint)0x0080)
+#define PROFF_SCC2      ((uint)0x0100)
+#define PROFF_SPI       ((uint)0x0180)
+#define PROFF_SCC3      ((uint)0x0200)
+#define PROFF_SMC1      ((uint)0x0280)
+#define PROFF_SCC4      ((uint)0x0300)
+#define PROFF_SMC2      ((uint)0x0380)
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+        ushort  smc_rbase;      /* Rx Buffer descriptor base address */
+        ushort  smc_tbase;      /* Tx Buffer descriptor base address */
+        u_char  smc_rfcr;       /* Rx function code */
+        u_char  smc_tfcr;       /* Tx function code */
+        ushort  smc_mrblr;      /* Max receive buffer length */
+        uint    smc_rstate;     /* Internal */
+        uint    smc_idp;        /* Internal */
+        ushort  smc_rbptr;      /* Internal */
+        ushort  smc_ibc;        /* Internal */
+        uint    smc_rxtmp;      /* Internal */
+        uint    smc_tstate;     /* Internal */
+        uint    smc_tdp;        /* Internal */
+        ushort  smc_tbptr;      /* Internal */
+        ushort  smc_tbc;        /* Internal */
+        uint    smc_txtmp;      /* Internal */
+        ushort  smc_maxidl;     /* Maximum idle characters */
+        ushort  smc_tmpidl;     /* Temporary idle counter */
+        ushort  smc_brklen;     /* Last received break length */
+        ushort  smc_brkec;      /* rcv'd break condition counter */
+        ushort  smc_brkcr;      /* xmt break count register */
+        ushort  smc_rmask;      /* Temporary bit mask */
+        char    res1[8];        /* Reserved */
+        ushort  smc_rpbase;     /* Relocation pointer */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB  ((u_char)0x10)  /* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define SMCMR_REN       ((ushort)0x0001)
+#define SMCMR_TEN       ((ushort)0x0002)
+#define SMCMR_DM        ((ushort)0x000c)
+#define SMCMR_SM_GCI    ((ushort)0x0000)
+#define SMCMR_SM_UART   ((ushort)0x0020)
+#define SMCMR_SM_TRANS  ((ushort)0x0030)
+#define SMCMR_SM_MASK   ((ushort)0x0030)
+#define SMCMR_PM_EVEN   ((ushort)0x0100)        /* Even parity, else odd */
+#define SMCMR_REVD      SMCMR_PM_EVEN
+#define SMCMR_PEN       ((ushort)0x0200)        /* Parity enable */
+#define SMCMR_BS        SMCMR_PEN
+#define SMCMR_SL        ((ushort)0x0400)        /* Two stops, else one */
+#define SMCR_CLEN_MASK  ((ushort)0x7800)        /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+        ushort  scent_rbase;
+        ushort  scent_tbase;
+        u_char  scent_cfcr;
+        u_char  scent_smask;
+        ushort  scent_mrblr;
+        uint    scent_rstate;
+        uint    scent_r_ptr;
+        ushort  scent_rbptr;
+        ushort  scent_r_cnt;
+        uint    scent_rtemp;
+        uint    scent_tstate;
+        uint    scent_t_ptr;
+        ushort  scent_tbptr;
+        ushort  scent_t_cnt;
+        uint    scent_ttemp;
+        ushort  scent_max_sl;
+        ushort  scent_sl_cnt;
+        ushort  scent_character1;
+        ushort  scent_character2;
+        ushort  scent_character3;
+        ushort  scent_character4;
+        ushort  scent_character5;
+        ushort  scent_character6;
+        ushort  scent_character7;
+        ushort  scent_character8;
+        ushort  scent_rccm;
+        ushort  scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F      ((u_char)0x08)
+#define SMC_CENT_PE     ((u_char)0x04)
+#define SMC_CENT_S      ((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
+#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
+#define SMCM_TXE        ((unsigned char)0x10)   /* When in Transparent Mode */
+#define SMCM_BSY        ((unsigned char)0x04)
+#define SMCM_TX         ((unsigned char)0x02)
+#define SMCM_RX         ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST             ((uint)0x00020000)
+#define CPM_BRG_EN              ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2       ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6       ((uint)0x00008000)
+#define CPM_BRG_ATB             ((uint)0x00002000)
+#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
+#define CPM_BRG_DIV16           ((uint)0x00000001)
+
+/* SI Clock Route Register
+*/
+#define SICR_RCLK_SCC1_BRG1     ((uint)0x00000000)
+#define SICR_TCLK_SCC1_BRG1     ((uint)0x00000000)
+#define SICR_RCLK_SCC2_BRG2     ((uint)0x00000800)
+#define SICR_TCLK_SCC2_BRG2     ((uint)0x00000100)
+#define SICR_RCLK_SCC3_BRG3     ((uint)0x00100000)
+#define SICR_TCLK_SCC3_BRG3     ((uint)0x00020000)
+#define SICR_RCLK_SCC4_BRG4     ((uint)0x18000000)
+#define SICR_TCLK_SCC4_BRG4     ((uint)0x03000000)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP           ((uint)0x00040000)
+#define SCC_GSMRH_GDE           ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT    ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC   ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC     ((uint)0x00000000)
+#define SCC_GSMRH_REVD          ((uint)0x00002000)
+#define SCC_GSMRH_TRX           ((uint)0x00001000)
+#define SCC_GSMRH_TTX           ((uint)0x00000800)
+#define SCC_GSMRH_CDP           ((uint)0x00000400)
+#define SCC_GSMRH_CTSP          ((uint)0x00000200)
+#define SCC_GSMRH_CDS           ((uint)0x00000100)
+#define SCC_GSMRH_CTSS          ((uint)0x00000080)
+#define SCC_GSMRH_TFL           ((uint)0x00000040)
+#define SCC_GSMRH_RFW           ((uint)0x00000020)
+#define SCC_GSMRH_TXSY          ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16        ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8         ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4         ((uint)0x00000004)
+#define SCC_GSMRH_RTSM          ((uint)0x00000002)
+#define SCC_GSMRH_RSYN          ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR           ((uint)0x80000000)      /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE     ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG      ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS      ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH     ((uint)0x00000000)
+#define SCC_GSMRL_TCI           ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3        ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4        ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14       ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF      ((uint)0x00000000)
+#define SCC_GSMRL_RINV          ((uint)0x02000000)
+#define SCC_GSMRL_TINV          ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128       ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64        ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48        ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32        ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16        ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8         ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE      ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1      ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01        ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10        ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS     ((uint)0x00000000)
+#define SCC_GSMRL_TEND          ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32       ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16       ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8        ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1        ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32       ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16       ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8        ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1        ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN    ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH    ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0      ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI     ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ      ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN    ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH    ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0      ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI     ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ      ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE       ((uint)0x000000c0)      /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO     ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP     ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM     ((uint)0x00000000)
+#define SCC_GSMRL_ENR           ((uint)0x00000020)
+#define SCC_GSMRL_ENT           ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET     ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_QMC      ((uint)0x0000000a)
+#define SCC_GSMRL_MODE_DDCMP    ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC   ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14      ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC    ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART     ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7      ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK    ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC     ((uint)0x00000000)
+
+#define SCC_TODR_TOD            ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE        ((unsigned char)0x10)
+#define SCCM_BSY        ((unsigned char)0x04)
+#define SCCM_TX         ((unsigned char)0x02)
+#define SCCM_RX         ((unsigned char)0x01)
+
+typedef struct scc_param {
+        ushort  scc_rbase;      /* Rx Buffer descriptor base address */
+        ushort  scc_tbase;      /* Tx Buffer descriptor base address */
+        u_char  scc_rfcr;       /* Rx function code */
+        u_char  scc_tfcr;       /* Tx function code */
+        ushort  scc_mrblr;      /* Max receive buffer length */
+        uint    scc_rstate;     /* Internal */
+        uint    scc_idp;        /* Internal */
+        ushort  scc_rbptr;      /* Internal */
+        ushort  scc_ibc;        /* Internal */
+        uint    scc_rxtmp;      /* Internal */
+        uint    scc_tstate;     /* Internal */
+        uint    scc_tdp;        /* Internal */
+        ushort  scc_tbptr;      /* Internal */
+        ushort  scc_tbc;        /* Internal */
+        uint    scc_txtmp;      /* Internal */
+        uint    scc_rcrc;       /* Internal */
+        uint    scc_tcrc;       /* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB  ((u_char)0x10)  /* Set big endian byte order */
+
+/* CPM Ethernet through SCCx.
+ */
+typedef struct scc_enet {
+        sccp_t  sen_genscc;
+        uint    sen_cpres;      /* Preset CRC */
+        uint    sen_cmask;      /* Constant mask for CRC */
+        uint    sen_crcec;      /* CRC Error counter */
+        uint    sen_alec;       /* alignment error counter */
+        uint    sen_disfc;      /* discard frame counter */
+        ushort  sen_pads;       /* Tx short frame pad character */
+        ushort  sen_retlim;     /* Retry limit threshold */
+        ushort  sen_retcnt;     /* Retry limit counter */
+        ushort  sen_maxflr;     /* maximum frame length register */
+        ushort  sen_minflr;     /* minimum frame length register */
+        ushort  sen_maxd1;      /* maximum DMA1 length */
+        ushort  sen_maxd2;      /* maximum DMA2 length */
+        ushort  sen_maxd;       /* Rx max DMA */
+        ushort  sen_dmacnt;     /* Rx DMA counter */
+        ushort  sen_maxb;       /* Max BD byte count */
+        ushort  sen_gaddr1;     /* Group address filter */
+        ushort  sen_gaddr2;
+        ushort  sen_gaddr3;
+        ushort  sen_gaddr4;
+        uint    sen_tbuf0data0; /* Save area 0 - current frame */
+        uint    sen_tbuf0data1; /* Save area 1 - current frame */
+        uint    sen_tbuf0rba;   /* Internal */
+        uint    sen_tbuf0crc;   /* Internal */
+        ushort  sen_tbuf0bcnt;  /* Internal */
+        ushort  sen_paddrh;     /* physical address (MSB) */
+        ushort  sen_paddrm;
+        ushort  sen_paddrl;     /* physical address (LSB) */
+        ushort  sen_pper;       /* persistence */
+        ushort  sen_rfbdptr;    /* Rx first BD pointer */
+        ushort  sen_tfbdptr;    /* Tx first BD pointer */
+        ushort  sen_tlbdptr;    /* Tx last BD pointer */
+        uint    sen_tbuf1data0; /* Save area 0 - current frame */
+        uint    sen_tbuf1data1; /* Save area 1 - current frame */
+        uint    sen_tbuf1rba;   /* Internal */
+        uint    sen_tbuf1crc;   /* Internal */
+        ushort  sen_tbuf1bcnt;  /* Internal */
+        ushort  sen_txlen;      /* Tx Frame length counter */
+        ushort  sen_iaddr1;     /* Individual address filter */
+        ushort  sen_iaddr2;
+        ushort  sen_iaddr3;
+        ushort  sen_iaddr4;
+        ushort  sen_boffcnt;    /* Backoff counter */
+
+        /* NOTE: Some versions of the manual have the following items
+         * incorrectly documented.  Below is the proper order.
+         */
+        ushort  sen_taddrh;     /* temp address (MSB) */
+        ushort  sen_taddrm;
+        ushort  sen_taddrl;     /* temp address (LSB) */
+} scc_enet_t;
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA   ((ushort)0x0080)        /* Graceful stop complete */
+#define SCCE_ENET_TXE   ((ushort)0x0010)        /* Transmit Error */
+#define SCCE_ENET_RXF   ((ushort)0x0008)        /* Full frame received */
+#define SCCE_ENET_BSY   ((ushort)0x0004)        /* All incoming buffers full */
+#define SCCE_ENET_TXB   ((ushort)0x0002)        /* A buffer was transmitted */
+#define SCCE_ENET_RXB   ((ushort)0x0001)        /* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC    ((ushort)0x8000)        /* Enable heartbeat */
+#define SCC_PSMR_FC     ((ushort)0x4000)        /* Force collision */
+#define SCC_PSMR_RSH    ((ushort)0x2000)        /* Receive short frames */
+#define SCC_PSMR_IAM    ((ushort)0x1000)        /* Check individual hash */
+#define SCC_PSMR_ENCRC  ((ushort)0x0800)        /* Ethernet CRC mode */
+#define SCC_PSMR_PRO    ((ushort)0x0200)        /* Promiscuous mode */
+#define SCC_PSMR_BRO    ((ushort)0x0100)        /* Catch broadcast pkts */
+#define SCC_PSMR_SBT    ((ushort)0x0080)        /* Special backoff timer */
+#define SCC_PSMR_LPB    ((ushort)0x0040)        /* Set Loopback mode */
+#define SCC_PSMR_SIP    ((ushort)0x0020)        /* Sample Input Pins */
+#define SCC_PSMR_LCW    ((ushort)0x0010)        /* Late collision window */
+#define SCC_PSMR_NIB22  ((ushort)0x000a)        /* Start frame search */
+#define SCC_PSMR_FDE    ((ushort)0x0001)        /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY        ((ushort)0x8000)
+#define BD_ENET_RX_WRAP         ((ushort)0x2000)
+#define BD_ENET_RX_INTR         ((ushort)0x1000)
+#define BD_ENET_RX_LAST         ((ushort)0x0800)
+#define BD_ENET_RX_FIRST        ((ushort)0x0400)
+#define BD_ENET_RX_MISS         ((ushort)0x0100)
+#define BD_ENET_RX_LG           ((ushort)0x0020)
+#define BD_ENET_RX_NO           ((ushort)0x0010)
+#define BD_ENET_RX_SH           ((ushort)0x0008)
+#define BD_ENET_RX_CR           ((ushort)0x0004)
+#define BD_ENET_RX_OV           ((ushort)0x0002)
+#define BD_ENET_RX_CL           ((ushort)0x0001)
+#define BD_ENET_RX_BC           ((ushort)0x0080)        /* DA is Broadcast */
+#define BD_ENET_RX_MC           ((ushort)0x0040)        /* DA is Multicast */
+#define BD_ENET_RX_STATS        ((ushort)0x013f)        /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY        ((ushort)0x8000)
+#define BD_ENET_TX_PAD          ((ushort)0x4000)
+#define BD_ENET_TX_WRAP         ((ushort)0x2000)
+#define BD_ENET_TX_INTR         ((ushort)0x1000)
+#define BD_ENET_TX_LAST         ((ushort)0x0800)
+#define BD_ENET_TX_TC           ((ushort)0x0400)
+#define BD_ENET_TX_DEF          ((ushort)0x0200)
+#define BD_ENET_TX_HB           ((ushort)0x0100)
+#define BD_ENET_TX_LC           ((ushort)0x0080)
+#define BD_ENET_TX_RL           ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK       ((ushort)0x003c)
+#define BD_ENET_TX_UN           ((ushort)0x0002)
+#define BD_ENET_TX_CSL          ((ushort)0x0001)
+#define BD_ENET_TX_STATS        ((ushort)0x03ff)        /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+        sccp_t  scc_genscc;
+        char    res1[8];        /* Reserved */
+        ushort  scc_maxidl;     /* Maximum idle chars */
+        ushort  scc_idlc;       /* temp idle counter */
+        ushort  scc_brkcr;      /* Break count register */
+        ushort  scc_parec;      /* receive parity error counter */
+        ushort  scc_frmec;      /* receive framing error counter */
+        ushort  scc_nosec;      /* receive noise counter */
+        ushort  scc_brkec;      /* receive break condition counter */
+        ushort  scc_brkln;      /* last received break length */
+        ushort  scc_uaddr1;     /* UART address character 1 */
+        ushort  scc_uaddr2;     /* UART address character 2 */
+        ushort  scc_rtemp;      /* Temp storage */
+        ushort  scc_toseq;      /* Transmit out of sequence char */
+        ushort  scc_char1;      /* control character 1 */
+        ushort  scc_char2;      /* control character 2 */
+        ushort  scc_char3;      /* control character 3 */
+        ushort  scc_char4;      /* control character 4 */
+        ushort  scc_char5;      /* control character 5 */
+        ushort  scc_char6;      /* control character 6 */
+        ushort  scc_char7;      /* control character 7 */
+        ushort  scc_char8;      /* control character 8 */
+        ushort  scc_rccm;       /* receive control character mask */
+        ushort  scc_rccr;       /* receive control character register */
+        ushort  scc_rlbc;       /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR           ((ushort)0x1000)
+#define UART_SCCM_GLT           ((ushort)0x0800)
+#define UART_SCCM_AB            ((ushort)0x0200)
+#define UART_SCCM_IDL           ((ushort)0x0100)
+#define UART_SCCM_GRA           ((ushort)0x0080)
+#define UART_SCCM_BRKE          ((ushort)0x0040)
+#define UART_SCCM_BRKS          ((ushort)0x0020)
+#define UART_SCCM_CCR           ((ushort)0x0008)
+#define UART_SCCM_BSY           ((ushort)0x0004)
+#define UART_SCCM_TX            ((ushort)0x0002)
+#define UART_SCCM_RX            ((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PSMR_FLC            ((ushort)0x8000)
+#define SCU_PSMR_SL             ((ushort)0x4000)
+#define SCU_PSMR_CL             ((ushort)0x3000)
+#define SCU_PSMR_UM             ((ushort)0x0c00)
+#define SCU_PSMR_FRZ            ((ushort)0x0200)
+#define SCU_PSMR_RZS            ((ushort)0x0100)
+#define SCU_PSMR_SYN            ((ushort)0x0080)
+#define SCU_PSMR_DRT            ((ushort)0x0040)
+#define SCU_PSMR_PEN            ((ushort)0x0010)
+#define SCU_PSMR_RPM            ((ushort)0x000c)
+#define SCU_PSMR_REVP           ((ushort)0x0008)
+#define SCU_PSMR_TPM            ((ushort)0x0003)
+#define SCU_PSMR_TEVP           ((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+        sccp_t  st_genscc;
+        uint    st_cpres;       /* Preset CRC */
+        uint    st_cmask;       /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST          ((ushort)0x0800)
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+        ushort  iic_rbase;      /* Rx Buffer descriptor base address */
+        ushort  iic_tbase;      /* Tx Buffer descriptor base address */
+        u_char  iic_rfcr;       /* Rx function code */
+        u_char  iic_tfcr;       /* Tx function code */
+        ushort  iic_mrblr;      /* Max receive buffer length */
+        uint    iic_rstate;     /* Internal */
+        uint    iic_rdp;        /* Internal */
+        ushort  iic_rbptr;      /* Internal */
+        ushort  iic_rbc;        /* Internal */
+        uint    iic_rxtmp;      /* Internal */
+        uint    iic_tstate;     /* Internal */
+        uint    iic_tdp;        /* Internal */
+        ushort  iic_tbptr;      /* Internal */
+        ushort  iic_tbc;        /* Internal */
+        uint    iic_txtmp;      /* Internal */
+        char    res1[4];        /* Reserved */
+        ushort  iic_rpbase;     /* Relocation pointer */
+        char    res2[2];        /* Reserved */
+} iic_t;
+
+#define BD_IIC_START            ((ushort)0x0400)
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+        ushort  spi_rbase;      /* Rx Buffer descriptor base address */
+        ushort  spi_tbase;      /* Tx Buffer descriptor base address */
+        u_char  spi_rfcr;       /* Rx function code */
+        u_char  spi_tfcr;       /* Tx function code */
+        ushort  spi_mrblr;      /* Max receive buffer length */
+        uint    spi_rstate;     /* Internal */
+        uint    spi_rdp;        /* Internal */
+        ushort  spi_rbptr;      /* Internal */
+        ushort  spi_rbc;        /* Internal */
+        uint    spi_rxtmp;      /* Internal */
+        uint    spi_tstate;     /* Internal */
+        uint    spi_tdp;        /* Internal */
+        ushort  spi_tbptr;      /* Internal */
+        ushort  spi_tbc;        /* Internal */
+        uint    spi_txtmp;      /* Internal */
+        uint    spi_res;
+        ushort  spi_rpbase;     /* Relocation pointer */
+        ushort  spi_res2;
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP     ((ushort)0x4000)        /* Loopback */
+#define SPMODE_CI       ((ushort)0x2000)        /* Clock Invert */
+#define SPMODE_CP       ((ushort)0x1000)        /* Clock Phase */
+#define SPMODE_DIV16    ((ushort)0x0800)        /* BRG/16 mode */
+#define SPMODE_REV      ((ushort)0x0400)        /* Reversed Data */
+#define SPMODE_MSTR     ((ushort)0x0200)        /* SPI Master */
+#define SPMODE_EN       ((ushort)0x0100)        /* Enable */
+#define SPMODE_LENMSK   ((ushort)0x00f0)        /* character length */
+#define SPMODE_LEN4     ((ushort)0x0030)        /*  4 bits per char */
+#define SPMODE_LEN8     ((ushort)0x0070)        /*  8 bits per char */
+#define SPMODE_LEN16    ((ushort)0x00f0)        /* 16 bits per char */
+#define SPMODE_PMMSK    ((ushort)0x000f)        /* prescale modulus */
+
+/* SPIE fields */
+#define SPIE_MME        0x20
+#define SPIE_TXE        0x10
+#define SPIE_BSY        0x04
+#define SPIE_TXB        0x02
+#define SPIE_RXB        0x01
+
+/*
+ * RISC Controller Configuration Register definitons
+ */
+#define RCCR_TIME       0x8000                  /* RISC Timer Enable */
+#define RCCR_TIMEP(t)   (((t) & 0x3F)<<8)       /* RISC Timer Period */
+#define RCCR_TIME_MASK  0x00FF                  /* not RISC Timer related bits */
+
+/* RISC Timer Parameter RAM offset */
+#define PROFF_RTMR      ((uint)0x01B0)
+
+typedef struct risc_timer_pram {
+        unsigned short  tm_base;        /* RISC Timer Table Base Address */
+        unsigned short  tm_ptr;         /* RISC Timer Table Pointer (internal) */
+        unsigned short  r_tmr;          /* RISC Timer Mode Register */
+        unsigned short  r_tmv;          /* RISC Timer Valid Register */
+        unsigned long   tm_cmd;         /* RISC Timer Command Register */
+        unsigned long   tm_cnt;         /* RISC Timer Internal Count */
+} rt_pram_t;
+
+/* Bits in RISC Timer Command Register */
+#define TM_CMD_VALID    0x80000000      /* Valid - Enables the timer */
+#define TM_CMD_RESTART  0x40000000      /* Restart - for automatic restart */
+#define TM_CMD_PWM      0x20000000      /* Run in Pulse Width Modulation Mode */
+#define TM_CMD_NUM(n)   (((n)&0xF)<<16) /* Timer Number */
+#define TM_CMD_PERIOD(p) ((p)&0xFFFF)   /* Timer Period */
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+#define CPMVEC_NR               32
+#define CPMVEC_PIO_PC15         ((ushort)0x1f)
+#define CPMVEC_SCC1             ((ushort)0x1e)
+#define CPMVEC_SCC2             ((ushort)0x1d)
+#define CPMVEC_SCC3             ((ushort)0x1c)
+#define CPMVEC_SCC4             ((ushort)0x1b)
+#define CPMVEC_PIO_PC14         ((ushort)0x1a)
+#define CPMVEC_TIMER1           ((ushort)0x19)
+#define CPMVEC_PIO_PC13         ((ushort)0x18)
+#define CPMVEC_PIO_PC12         ((ushort)0x17)
+#define CPMVEC_SDMA_CB_ERR      ((ushort)0x16)
+#define CPMVEC_IDMA1            ((ushort)0x15)
+#define CPMVEC_IDMA2            ((ushort)0x14)
+#define CPMVEC_TIMER2           ((ushort)0x12)
+#define CPMVEC_RISCTIMER        ((ushort)0x11)
+#define CPMVEC_I2C              ((ushort)0x10)
+#define CPMVEC_PIO_PC11         ((ushort)0x0f)
+#define CPMVEC_PIO_PC10         ((ushort)0x0e)
+#define CPMVEC_TIMER3           ((ushort)0x0c)
+#define CPMVEC_PIO_PC9          ((ushort)0x0b)
+#define CPMVEC_PIO_PC8          ((ushort)0x0a)
+#define CPMVEC_PIO_PC7          ((ushort)0x09)
+#define CPMVEC_TIMER4           ((ushort)0x07)
+#define CPMVEC_PIO_PC6          ((ushort)0x06)
+#define CPMVEC_SPI              ((ushort)0x05)
+#define CPMVEC_SMC1             ((ushort)0x04)
+#define CPMVEC_SMC2             ((ushort)0x03)
+#define CPMVEC_PIO_PC5          ((ushort)0x02)
+#define CPMVEC_PIO_PC4          ((ushort)0x01)
+#define CPMVEC_ERROR            ((ushort)0x00)
+
+/* CPM interrupt configuration vector.
+*/
+#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
+#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
+#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
+#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
+#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrrupt */
+#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
+#define CICR_IEN                ((uint)0x00000080)      /* Int. enable */
+#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
+
+extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+extern void cpm_free_handler(int vec);
+
+#define IMAP_ADDR               (get_immrbase())
+
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+enum cpm_port {
+        CPM_PORTA,
+        CPM_PORTB,
+        CPM_PORTC,
+        CPM_PORTD,
+        CPM_PORTE,
+};
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags);
+
+enum cpm_clk_dir {
+        CPM_CLK_RX,
+        CPM_CLK_TX,
+        CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+        CPM_CLK_SCC1,
+        CPM_CLK_SCC2,
+        CPM_CLK_SCC3,
+        CPM_CLK_SCC4,
+        CPM_CLK_SMC1,
+        CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+        CPM_BRG1,       /* Baud Rate Generator  1 */
+        CPM_BRG2,       /* Baud Rate Generator  2 */
+        CPM_BRG3,       /* Baud Rate Generator  3 */
+        CPM_BRG4,       /* Baud Rate Generator  4 */
+        CPM_CLK1,       /* Clock  1 */
+        CPM_CLK2,       /* Clock  2 */
+        CPM_CLK3,       /* Clock  3 */
+        CPM_CLK4,       /* Clock  4 */
+        CPM_CLK5,       /* Clock  5 */
+        CPM_CLK6,       /* Clock  6 */
+        CPM_CLK7,       /* Clock  7 */
+        CPM_CLK8,       /* Clock  8 */
+};
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
+
+#endif /* __CPM_8XX__ */
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
new file mode 100644
index 000000000000..48df9f330e76
--- /dev/null
+++ b/include/asm-powerpc/cpm.h
@@ -0,0 +1,14 @@
+#ifndef __CPM_H
+#define __CPM_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+int cpm_muram_init(void);
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(unsigned long offset);
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *cpm_muram_addr(unsigned long offset);
+dma_addr_t cpm_muram_dma(void __iomem *addr);
+
+#endif
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
new file mode 100644
index 000000000000..f1112c15ef96
--- /dev/null
+++ b/include/asm-powerpc/cpm2.h
@@ -0,0 +1,1274 @@
+/*
+ * Communication Processor Module v2.
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the CPM2 internal
+ * memory map.  See immap_cpm2.h for details.
+ */
+#ifdef __KERNEL__
+#ifndef __CPM2__
+#define __CPM2__
+
+#include <asm/immap_cpm2.h>
+#include <asm/cpm.h>
+
+#ifdef CONFIG_PPC_85xx
+#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
+#endif
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST      ((uint)0x80000000)
+#define CPM_CR_PAGE     ((uint)0x7c000000)
+#define CPM_CR_SBLOCK   ((uint)0x03e00000)
+#define CPM_CR_FLG      ((uint)0x00010000)
+#define CPM_CR_MCN      ((uint)0x00003fc0)
+#define CPM_CR_OPCODE   ((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK      (0x04)
+#define CPM_CR_SCC2_SBLOCK      (0x05)
+#define CPM_CR_SCC3_SBLOCK      (0x06)
+#define CPM_CR_SCC4_SBLOCK      (0x07)
+#define CPM_CR_SMC1_SBLOCK      (0x08)
+#define CPM_CR_SMC2_SBLOCK      (0x09)
+#define CPM_CR_SPI_SBLOCK       (0x0a)
+#define CPM_CR_I2C_SBLOCK       (0x0b)
+#define CPM_CR_TIMER_SBLOCK     (0x0f)
+#define CPM_CR_RAND_SBLOCK      (0x0e)
+#define CPM_CR_FCC1_SBLOCK      (0x10)
+#define CPM_CR_FCC2_SBLOCK      (0x11)
+#define CPM_CR_FCC3_SBLOCK      (0x12)
+#define CPM_CR_IDMA1_SBLOCK     (0x14)
+#define CPM_CR_IDMA2_SBLOCK     (0x15)
+#define CPM_CR_IDMA3_SBLOCK     (0x16)
+#define CPM_CR_IDMA4_SBLOCK     (0x17)
+#define CPM_CR_MCC1_SBLOCK      (0x1c)
+
+#define CPM_CR_FCC_SBLOCK(x)    (x + 0x10)
+
+#define CPM_CR_SCC1_PAGE        (0x00)
+#define CPM_CR_SCC2_PAGE        (0x01)
+#define CPM_CR_SCC3_PAGE        (0x02)
+#define CPM_CR_SCC4_PAGE        (0x03)
+#define CPM_CR_SMC1_PAGE        (0x07)
+#define CPM_CR_SMC2_PAGE        (0x08)
+#define CPM_CR_SPI_PAGE         (0x09)
+#define CPM_CR_I2C_PAGE         (0x0a)
+#define CPM_CR_TIMER_PAGE       (0x0a)
+#define CPM_CR_RAND_PAGE        (0x0a)
+#define CPM_CR_FCC1_PAGE        (0x04)
+#define CPM_CR_FCC2_PAGE        (0x05)
+#define CPM_CR_FCC3_PAGE        (0x06)
+#define CPM_CR_IDMA1_PAGE       (0x07)
+#define CPM_CR_IDMA2_PAGE       (0x08)
+#define CPM_CR_IDMA3_PAGE       (0x09)
+#define CPM_CR_IDMA4_PAGE       (0x0a)
+#define CPM_CR_MCC1_PAGE        (0x07)
+#define CPM_CR_MCC2_PAGE        (0x08)
+
+#define CPM_CR_FCC_PAGE(x)      (x + 0x04)
+
+/* Some opcodes (there are more...later)
+*/
+#define CPM_CR_INIT_TRX         ((ushort)0x0000)
+#define CPM_CR_INIT_RX          ((ushort)0x0001)
+#define CPM_CR_INIT_TX          ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE        ((ushort)0x0003)
+#define CPM_CR_STOP_TX          ((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX      ((ushort)0x0005)
+#define CPM_CR_RESTART_TX       ((ushort)0x0006)
+#define CPM_CR_SET_GADDR        ((ushort)0x0008)
+#define CPM_CR_START_IDMA       ((ushort)0x0009)
+#define CPM_CR_STOP_IDMA        ((ushort)0x000b)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+        ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
+/* Dual Port RAM addresses.  The first 16K is available for almost
+ * any CPM use, so we put the BDs there.  The first 128 bytes are
+ * used for SMC1 and SMC2 parameter RAM, so we start allocating
+ * BDs above that.  All of this must change when we start
+ * downloading RAM microcode.
+ */
+#define CPM_DATAONLY_BASE       ((uint)128)
+#define CPM_DP_NOSPACE          ((uint)0x7fffffff)
+#if defined(CONFIG_8272) || defined(CONFIG_MPC8555)
+#define CPM_DATAONLY_SIZE       ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE    ((uint)0x00009000)
+#else
+#define CPM_DATAONLY_SIZE       ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_FCC_SPECIAL_BASE    ((uint)0x0000b000)
+#endif
+#endif
+
+/* The number of pages of host memory we allocate for CPM.  This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES      2
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#else
+extern unsigned long cpm_dpalloc(uint size, uint align);
+extern int cpm_dpfree(unsigned long offset);
+extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
+extern void cpm_dpdump(void);
+extern void *cpm_dpram_addr(unsigned long offset);
+#endif
+
+extern void cpm_setbrg(uint brg, uint rate);
+extern void cpm2_fastbrg(uint brg, uint rate, int div16);
+extern void cpm2_reset(void);
+
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+        ushort  cbd_sc;         /* Status and Control */
+        ushort  cbd_datlen;     /* Data length in buffer */
+        uint    cbd_bufaddr;    /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
+#define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
+#define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
+#define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
+#define BD_SC_LAST      ((ushort)0x0800)        /* Last buffer in frame */
+#define BD_SC_CM        ((ushort)0x0200)        /* Continous mode */
+#define BD_SC_ID        ((ushort)0x0100)        /* Rec'd too many idles */
+#define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
+#define BD_SC_BR        ((ushort)0x0020)        /* Break received */
+#define BD_SC_FR        ((ushort)0x0010)        /* Framing error */
+#define BD_SC_PR        ((ushort)0x0008)        /* Parity error */
+#define BD_SC_OV        ((ushort)0x0002)        /* Overrun */
+#define BD_SC_CD        ((ushort)0x0001)        /* ?? */
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL      ((u_char)0x20)  /* Set memory snooping */
+#define CPMFCR_EB       ((u_char)0x10)  /* Set big endian byte order */
+#define CPMFCR_TC2      ((u_char)0x04)  /* Transfer code 2 value */
+#define CPMFCR_DTB      ((u_char)0x02)  /* Use local bus for data when set */
+#define CPMFCR_BDB      ((u_char)0x01)  /* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#define PROFF_SCC1              ((uint)0x8000)
+#define PROFF_SCC2              ((uint)0x8100)
+#define PROFF_SCC3              ((uint)0x8200)
+#define PROFF_SCC4              ((uint)0x8300)
+#define PROFF_FCC1              ((uint)0x8400)
+#define PROFF_FCC2              ((uint)0x8500)
+#define PROFF_FCC3              ((uint)0x8600)
+#define PROFF_MCC1              ((uint)0x8700)
+#define PROFF_SMC1_BASE         ((uint)0x87fc)
+#define PROFF_IDMA1_BASE        ((uint)0x87fe)
+#define PROFF_MCC2              ((uint)0x8800)
+#define PROFF_SMC2_BASE         ((uint)0x88fc)
+#define PROFF_IDMA2_BASE        ((uint)0x88fe)
+#define PROFF_SPI_BASE          ((uint)0x89fc)
+#define PROFF_IDMA3_BASE        ((uint)0x89fe)
+#define PROFF_TIMERS            ((uint)0x8ae0)
+#define PROFF_REVNUM            ((uint)0x8af0)
+#define PROFF_RAND              ((uint)0x8af8)
+#define PROFF_I2C_BASE          ((uint)0x8afc)
+#define PROFF_IDMA4_BASE        ((uint)0x8afe)
+
+#define PROFF_SCC_SIZE          ((uint)0x100)
+#define PROFF_FCC_SIZE          ((uint)0x100)
+#define PROFF_SMC_SIZE          ((uint)64)
+
+/* The SMCs are relocated to any of the first eight DPRAM pages.
+ * We will fix these at the first locations of DPRAM, until we
+ * get some microcode patches :-).
+ * The parameter ram space for the SMCs is fifty-some bytes, and
+ * they are required to start on a 64 byte boundary.
+ */
+#define PROFF_SMC1      (0)
+#define PROFF_SMC2      (64)
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+        ushort  smc_rbase;      /* Rx Buffer descriptor base address */
+        ushort  smc_tbase;      /* Tx Buffer descriptor base address */
+        u_char  smc_rfcr;       /* Rx function code */
+        u_char  smc_tfcr;       /* Tx function code */
+        ushort  smc_mrblr;      /* Max receive buffer length */
+        uint    smc_rstate;     /* Internal */
+        uint    smc_idp;        /* Internal */
+        ushort  smc_rbptr;      /* Internal */
+        ushort  smc_ibc;        /* Internal */
+        uint    smc_rxtmp;      /* Internal */
+        uint    smc_tstate;     /* Internal */
+        uint    smc_tdp;        /* Internal */
+        ushort  smc_tbptr;      /* Internal */
+        ushort  smc_tbc;        /* Internal */
+        uint    smc_txtmp;      /* Internal */
+        ushort  smc_maxidl;     /* Maximum idle characters */
+        ushort  smc_tmpidl;     /* Temporary idle counter */
+        ushort  smc_brklen;     /* Last received break length */
+        ushort  smc_brkec;      /* rcv'd break condition counter */
+        ushort  smc_brkcr;      /* xmt break count register */
+        ushort  smc_rmask;      /* Temporary bit mask */
+        uint    smc_stmp;       /* SDMA Temp */
+} smc_uart_t;
+
+/* SMC uart mode register (Internal memory map).
+*/
+#define SMCMR_REN       ((ushort)0x0001)
+#define SMCMR_TEN       ((ushort)0x0002)
+#define SMCMR_DM        ((ushort)0x000c)
+#define SMCMR_SM_GCI    ((ushort)0x0000)
+#define SMCMR_SM_UART   ((ushort)0x0020)
+#define SMCMR_SM_TRANS  ((ushort)0x0030)
+#define SMCMR_SM_MASK   ((ushort)0x0030)
+#define SMCMR_PM_EVEN   ((ushort)0x0100)        /* Even parity, else odd */
+#define SMCMR_REVD      SMCMR_PM_EVEN
+#define SMCMR_PEN       ((ushort)0x0200)        /* Parity enable */
+#define SMCMR_BS        SMCMR_PEN
+#define SMCMR_SL        ((ushort)0x0400)        /* Two stops, else one */
+#define SMCR_CLEN_MASK  ((ushort)0x7800)        /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
+#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
+#define SMCM_TXE        ((unsigned char)0x10)
+#define SMCM_BSY        ((unsigned char)0x04)
+#define SMCM_TX         ((unsigned char)0x02)
+#define SMCM_RX         ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST             ((uint)0x00020000)
+#define CPM_BRG_EN              ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9     ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15    ((uint)0x00008000)
+#define CPM_BRG_ATB             ((uint)0x00002000)
+#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
+#define CPM_BRG_DIV16           ((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP           ((uint)0x00040000)
+#define SCC_GSMRH_GDE           ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT    ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC   ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC     ((uint)0x00000000)
+#define SCC_GSMRH_REVD          ((uint)0x00002000)
+#define SCC_GSMRH_TRX           ((uint)0x00001000)
+#define SCC_GSMRH_TTX           ((uint)0x00000800)
+#define SCC_GSMRH_CDP           ((uint)0x00000400)
+#define SCC_GSMRH_CTSP          ((uint)0x00000200)
+#define SCC_GSMRH_CDS           ((uint)0x00000100)
+#define SCC_GSMRH_CTSS          ((uint)0x00000080)
+#define SCC_GSMRH_TFL           ((uint)0x00000040)
+#define SCC_GSMRH_RFW           ((uint)0x00000020)
+#define SCC_GSMRH_TXSY          ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16        ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8         ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4         ((uint)0x00000004)
+#define SCC_GSMRH_RTSM          ((uint)0x00000002)
+#define SCC_GSMRH_RSYN          ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR           ((uint)0x80000000)      /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE     ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG      ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS      ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH     ((uint)0x00000000)
+#define SCC_GSMRL_TCI           ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3        ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4        ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14       ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF      ((uint)0x00000000)
+#define SCC_GSMRL_RINV          ((uint)0x02000000)
+#define SCC_GSMRL_TINV          ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128       ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64        ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48        ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32        ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16        ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8         ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE      ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1      ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01        ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10        ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS     ((uint)0x00000000)
+#define SCC_GSMRL_TEND          ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32       ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16       ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8        ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1        ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32       ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16       ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8        ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1        ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN    ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH    ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0      ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI     ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ      ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN    ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH    ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0      ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI     ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ      ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE       ((uint)0x000000c0)      /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO     ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP     ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM     ((uint)0x00000000)
+#define SCC_GSMRL_ENR           ((uint)0x00000020)
+#define SCC_GSMRL_ENT           ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET     ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP    ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC   ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14      ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC    ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART     ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7      ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK    ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC     ((uint)0x00000000)
+
+#define SCC_TODR_TOD            ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE        ((unsigned char)0x10)
+#define SCCM_BSY        ((unsigned char)0x04)
+#define SCCM_TX         ((unsigned char)0x02)
+#define SCCM_RX         ((unsigned char)0x01)
+
+typedef struct scc_param {
+        ushort  scc_rbase;      /* Rx Buffer descriptor base address */
+        ushort  scc_tbase;      /* Tx Buffer descriptor base address */
+        u_char  scc_rfcr;       /* Rx function code */
+        u_char  scc_tfcr;       /* Tx function code */
+        ushort  scc_mrblr;      /* Max receive buffer length */
+        uint    scc_rstate;     /* Internal */
+        uint    scc_idp;        /* Internal */
+        ushort  scc_rbptr;      /* Internal */
+        ushort  scc_ibc;        /* Internal */
+        uint    scc_rxtmp;      /* Internal */
+        uint    scc_tstate;     /* Internal */
+        uint    scc_tdp;        /* Internal */
+        ushort  scc_tbptr;      /* Internal */
+        ushort  scc_tbc;        /* Internal */
+        uint    scc_txtmp;      /* Internal */
+        uint    scc_rcrc;       /* Internal */
+        uint    scc_tcrc;       /* Internal */
+} sccp_t;
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+        sccp_t  sen_genscc;
+        uint    sen_cpres;      /* Preset CRC */
+        uint    sen_cmask;      /* Constant mask for CRC */
+        uint    sen_crcec;      /* CRC Error counter */
+        uint    sen_alec;       /* alignment error counter */
+        uint    sen_disfc;      /* discard frame counter */
+        ushort  sen_pads;       /* Tx short frame pad character */
+        ushort  sen_retlim;     /* Retry limit threshold */
+        ushort  sen_retcnt;     /* Retry limit counter */
+        ushort  sen_maxflr;     /* maximum frame length register */
+        ushort  sen_minflr;     /* minimum frame length register */
+        ushort  sen_maxd1;      /* maximum DMA1 length */
+        ushort  sen_maxd2;      /* maximum DMA2 length */
+        ushort  sen_maxd;       /* Rx max DMA */
+        ushort  sen_dmacnt;     /* Rx DMA counter */
+        ushort  sen_maxb;       /* Max BD byte count */
+        ushort  sen_gaddr1;     /* Group address filter */
+        ushort  sen_gaddr2;
+        ushort  sen_gaddr3;
+        ushort  sen_gaddr4;
+        uint    sen_tbuf0data0; /* Save area 0 - current frame */
+        uint    sen_tbuf0data1; /* Save area 1 - current frame */
+        uint    sen_tbuf0rba;   /* Internal */
+        uint    sen_tbuf0crc;   /* Internal */
+        ushort  sen_tbuf0bcnt;  /* Internal */
+        ushort  sen_paddrh;     /* physical address (MSB) */
+        ushort  sen_paddrm;
+        ushort  sen_paddrl;     /* physical address (LSB) */
+        ushort  sen_pper;       /* persistence */
+        ushort  sen_rfbdptr;    /* Rx first BD pointer */
+        ushort  sen_tfbdptr;    /* Tx first BD pointer */
+        ushort  sen_tlbdptr;    /* Tx last BD pointer */
+        uint    sen_tbuf1data0; /* Save area 0 - current frame */
+        uint    sen_tbuf1data1; /* Save area 1 - current frame */
+        uint    sen_tbuf1rba;   /* Internal */
+        uint    sen_tbuf1crc;   /* Internal */
+        ushort  sen_tbuf1bcnt;  /* Internal */
+        ushort  sen_txlen;      /* Tx Frame length counter */
+        ushort  sen_iaddr1;     /* Individual address filter */
+        ushort  sen_iaddr2;
+        ushort  sen_iaddr3;
+        ushort  sen_iaddr4;
+        ushort  sen_boffcnt;    /* Backoff counter */
+
+        /* NOTE: Some versions of the manual have the following items
+         * incorrectly documented.  Below is the proper order.
+         */
+        ushort  sen_taddrh;     /* temp address (MSB) */
+        ushort  sen_taddrm;
+        ushort  sen_taddrl;     /* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA   ((ushort)0x0080)        /* Graceful stop complete */
+#define SCCE_ENET_TXE   ((ushort)0x0010)        /* Transmit Error */
+#define SCCE_ENET_RXF   ((ushort)0x0008)        /* Full frame received */
+#define SCCE_ENET_BSY   ((ushort)0x0004)        /* All incoming buffers full */
+#define SCCE_ENET_TXB   ((ushort)0x0002)        /* A buffer was transmitted */
+#define SCCE_ENET_RXB   ((ushort)0x0001)        /* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC    ((ushort)0x8000)        /* Enable heartbeat */
+#define SCC_PSMR_FC     ((ushort)0x4000)        /* Force collision */
+#define SCC_PSMR_RSH    ((ushort)0x2000)        /* Receive short frames */
+#define SCC_PSMR_IAM    ((ushort)0x1000)        /* Check individual hash */
+#define SCC_PSMR_ENCRC  ((ushort)0x0800)        /* Ethernet CRC mode */
+#define SCC_PSMR_PRO    ((ushort)0x0200)        /* Promiscuous mode */
+#define SCC_PSMR_BRO    ((ushort)0x0100)        /* Catch broadcast pkts */
+#define SCC_PSMR_SBT    ((ushort)0x0080)        /* Special backoff timer */
+#define SCC_PSMR_LPB    ((ushort)0x0040)        /* Set Loopback mode */
+#define SCC_PSMR_SIP    ((ushort)0x0020)        /* Sample Input Pins */
+#define SCC_PSMR_LCW    ((ushort)0x0010)        /* Late collision window */
+#define SCC_PSMR_NIB22  ((ushort)0x000a)        /* Start frame search */
+#define SCC_PSMR_FDE    ((ushort)0x0001)        /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY        ((ushort)0x8000)
+#define BD_ENET_RX_WRAP         ((ushort)0x2000)
+#define BD_ENET_RX_INTR         ((ushort)0x1000)
+#define BD_ENET_RX_LAST         ((ushort)0x0800)
+#define BD_ENET_RX_FIRST        ((ushort)0x0400)
+#define BD_ENET_RX_MISS         ((ushort)0x0100)
+#define BD_ENET_RX_BC           ((ushort)0x0080)        /* FCC Only */
+#define BD_ENET_RX_MC           ((ushort)0x0040)        /* FCC Only */
+#define BD_ENET_RX_LG           ((ushort)0x0020)
+#define BD_ENET_RX_NO           ((ushort)0x0010)
+#define BD_ENET_RX_SH           ((ushort)0x0008)
+#define BD_ENET_RX_CR           ((ushort)0x0004)
+#define BD_ENET_RX_OV           ((ushort)0x0002)
+#define BD_ENET_RX_CL           ((ushort)0x0001)
+#define BD_ENET_RX_STATS        ((ushort)0x01ff)        /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY        ((ushort)0x8000)
+#define BD_ENET_TX_PAD          ((ushort)0x4000)
+#define BD_ENET_TX_WRAP         ((ushort)0x2000)
+#define BD_ENET_TX_INTR         ((ushort)0x1000)
+#define BD_ENET_TX_LAST         ((ushort)0x0800)
+#define BD_ENET_TX_TC           ((ushort)0x0400)
+#define BD_ENET_TX_DEF          ((ushort)0x0200)
+#define BD_ENET_TX_HB           ((ushort)0x0100)
+#define BD_ENET_TX_LC           ((ushort)0x0080)
+#define BD_ENET_TX_RL           ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK       ((ushort)0x003c)
+#define BD_ENET_TX_UN           ((ushort)0x0002)
+#define BD_ENET_TX_CSL          ((ushort)0x0001)
+#define BD_ENET_TX_STATS        ((ushort)0x03ff)        /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+        sccp_t  scc_genscc;
+        uint    scc_res1;       /* Reserved */
+        uint    scc_res2;       /* Reserved */
+        ushort  scc_maxidl;     /* Maximum idle chars */
+        ushort  scc_idlc;       /* temp idle counter */
+        ushort  scc_brkcr;      /* Break count register */
+        ushort  scc_parec;      /* receive parity error counter */
+        ushort  scc_frmec;      /* receive framing error counter */
+        ushort  scc_nosec;      /* receive noise counter */
+        ushort  scc_brkec;      /* receive break condition counter */
+        ushort  scc_brkln;      /* last received break length */
+        ushort  scc_uaddr1;     /* UART address character 1 */
+        ushort  scc_uaddr2;     /* UART address character 2 */
+        ushort  scc_rtemp;      /* Temp storage */
+        ushort  scc_toseq;      /* Transmit out of sequence char */
+        ushort  scc_char1;      /* control character 1 */
+        ushort  scc_char2;      /* control character 2 */
+        ushort  scc_char3;      /* control character 3 */
+        ushort  scc_char4;      /* control character 4 */
+        ushort  scc_char5;      /* control character 5 */
+        ushort  scc_char6;      /* control character 6 */
+        ushort  scc_char7;      /* control character 7 */
+        ushort  scc_char8;      /* control character 8 */
+        ushort  scc_rccm;       /* receive control character mask */
+        ushort  scc_rccr;       /* receive control character register */
+        ushort  scc_rlbc;       /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR           ((ushort)0x1000)
+#define UART_SCCM_GLT           ((ushort)0x0800)
+#define UART_SCCM_AB            ((ushort)0x0200)
+#define UART_SCCM_IDL           ((ushort)0x0100)
+#define UART_SCCM_GRA           ((ushort)0x0080)
+#define UART_SCCM_BRKE          ((ushort)0x0040)
+#define UART_SCCM_BRKS          ((ushort)0x0020)
+#define UART_SCCM_CCR           ((ushort)0x0008)
+#define UART_SCCM_BSY           ((ushort)0x0004)
+#define UART_SCCM_TX            ((ushort)0x0002)
+#define UART_SCCM_RX            ((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC            ((ushort)0x8000)
+#define SCU_PSMR_SL             ((ushort)0x4000)
+#define SCU_PSMR_CL             ((ushort)0x3000)
+#define SCU_PSMR_UM             ((ushort)0x0c00)
+#define SCU_PSMR_FRZ            ((ushort)0x0200)
+#define SCU_PSMR_RZS            ((ushort)0x0100)
+#define SCU_PSMR_SYN            ((ushort)0x0080)
+#define SCU_PSMR_DRT            ((ushort)0x0040)
+#define SCU_PSMR_PEN            ((ushort)0x0010)
+#define SCU_PSMR_RPM            ((ushort)0x000c)
+#define SCU_PSMR_REVP           ((ushort)0x0008)
+#define SCU_PSMR_TPM            ((ushort)0x0003)
+#define SCU_PSMR_TEVP           ((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+        sccp_t  st_genscc;
+        uint    st_cpres;       /* Preset CRC */
+        uint    st_cmask;       /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST          ((ushort)0x0800)
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM      ((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE        ((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE        ((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE       ((uint)0xc0000000)
+#define FCC_GFMR_TCI            ((uint)0x20000000)
+#define FCC_GFMR_TRX            ((uint)0x10000000)
+#define FCC_GFMR_TTX            ((uint)0x08000000)
+#define FCC_GFMR_TTX            ((uint)0x08000000)
+#define FCC_GFMR_CDP            ((uint)0x04000000)
+#define FCC_GFMR_CTSP           ((uint)0x02000000)
+#define FCC_GFMR_CDS            ((uint)0x01000000)
+#define FCC_GFMR_CTSS           ((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE      ((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO      ((uint)0x00004000)
+#define FCC_GFMR_SYNL_8         ((uint)0x00008000)
+#define FCC_GFMR_SYNL_16        ((uint)0x0000c000)
+#define FCC_GFMR_RTSM           ((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ       ((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI      ((uint)0x00000800)
+#define FCC_GFMR_REVD           ((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ       ((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI      ((uint)0x00000100)
+#define FCC_GFMR_TCRC_16        ((uint)0x00000000)
+#define FCC_GFMR_TCRC_32        ((uint)0x00000080)
+#define FCC_GFMR_ENR            ((uint)0x00000020)
+#define FCC_GFMR_ENT            ((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET      ((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM       ((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC      ((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+        ushort  fcc_riptr;      /* Rx Internal temp pointer */
+        ushort  fcc_tiptr;      /* Tx Internal temp pointer */
+        ushort  fcc_res1;
+        ushort  fcc_mrblr;      /* Max receive buffer length, mod 32 bytes */
+        uint    fcc_rstate;     /* Upper byte is Func code, must be set */
+        uint    fcc_rbase;      /* Receive BD base */
+        ushort  fcc_rbdstat;    /* RxBD status */
+        ushort  fcc_rbdlen;     /* RxBD down counter */
+        uint    fcc_rdptr;      /* RxBD internal data pointer */
+        uint    fcc_tstate;     /* Upper byte is Func code, must be set */
+        uint    fcc_tbase;      /* Transmit BD base */
+        ushort  fcc_tbdstat;    /* TxBD status */
+        ushort  fcc_tbdlen;     /* TxBD down counter */
+        uint    fcc_tdptr;      /* TxBD internal data pointer */
+        uint    fcc_rbptr;      /* Rx BD Internal buf pointer */
+        uint    fcc_tbptr;      /* Tx BD Internal buf pointer */
+        uint    fcc_rcrc;       /* Rx temp CRC */
+        uint    fcc_res2;
+        uint    fcc_tcrc;       /* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+        fccp_t  fen_genfcc;
+        uint    fen_statbuf;    /* Internal status buffer */
+        uint    fen_camptr;     /* CAM address */
+        uint    fen_cmask;      /* Constant mask for CRC */
+        uint    fen_cpres;      /* Preset CRC */
+        uint    fen_crcec;      /* CRC Error counter */
+        uint    fen_alec;       /* alignment error counter */
+        uint    fen_disfc;      /* discard frame counter */
+        ushort  fen_retlim;     /* Retry limit */
+        ushort  fen_retcnt;     /* Retry counter */
+        ushort  fen_pper;       /* Persistence */
+        ushort  fen_boffcnt;    /* backoff counter */
+        uint    fen_gaddrh;     /* Group address filter, high 32-bits */
+        uint    fen_gaddrl;     /* Group address filter, low 32-bits */
+        ushort  fen_tfcstat;    /* out of sequence TxBD */
+        ushort  fen_tfclen;
+        uint    fen_tfcptr;
+        ushort  fen_mflr;       /* Maximum frame length (1518) */
+        ushort  fen_paddrh;     /* MAC address */
+        ushort  fen_paddrm;
+        ushort  fen_paddrl;
+        ushort  fen_ibdcount;   /* Internal BD counter */
+        ushort  fen_ibdstart;   /* Internal BD start pointer */
+        ushort  fen_ibdend;     /* Internal BD end pointer */
+        ushort  fen_txlen;      /* Internal Tx frame length counter */
+        uint    fen_ibdbase[8]; /* Internal use */
+        uint    fen_iaddrh;     /* Individual address filter */
+        uint    fen_iaddrl;
+        ushort  fen_minflr;     /* Minimum frame length (64) */
+        ushort  fen_taddrh;     /* Filter transfer MAC address */
+        ushort  fen_taddrm;
+        ushort  fen_taddrl;
+        ushort  fen_padptr;     /* Pointer to pad byte buffer */
+        ushort  fen_cftype;     /* control frame type */
+        ushort  fen_cfrange;    /* control frame range */
+        ushort  fen_maxb;       /* maximum BD count */
+        ushort  fen_maxd1;      /* Max DMA1 length (1520) */
+        ushort  fen_maxd2;      /* Max DMA2 length (1520) */
+        ushort  fen_maxd;       /* internal max DMA count */
+        ushort  fen_dmacnt;     /* internal DMA counter */
+        uint    fen_octc;       /* Total octect counter */
+        uint    fen_colc;       /* Total collision counter */
+        uint    fen_broc;       /* Total broadcast packet counter */
+        uint    fen_mulc;       /* Total multicast packet count */
+        uint    fen_uspc;       /* Total packets < 64 bytes */
+        uint    fen_frgc;       /* Total packets < 64 bytes with errors */
+        uint    fen_ospc;       /* Total packets > 1518 */
+        uint    fen_jbrc;       /* Total packets > 1518 with errors */
+        uint    fen_p64c;       /* Total packets == 64 bytes */
+        uint    fen_p65c;       /* Total packets 64 < bytes <= 127 */
+        uint    fen_p128c;      /* Total packets 127 < bytes <= 255 */
+        uint    fen_p256c;      /* Total packets 256 < bytes <= 511 */
+        uint    fen_p512c;      /* Total packets 512 < bytes <= 1023 */
+        uint    fen_p1024c;     /* Total packets 1024 < bytes <= 1518 */
+        uint    fen_cambuf;     /* Internal CAM buffer poiner */
+        ushort  fen_rfthr;      /* Received frames threshold */
+        ushort  fen_rfcnt;      /* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA    ((ushort)0x0080)        /* Graceful stop complete */
+#define FCC_ENET_RXC    ((ushort)0x0040)        /* Control Frame Received */
+#define FCC_ENET_TXC    ((ushort)0x0020)        /* Out of seq. Tx sent */
+#define FCC_ENET_TXE    ((ushort)0x0010)        /* Transmit Error */
+#define FCC_ENET_RXF    ((ushort)0x0008)        /* Full frame received */
+#define FCC_ENET_BSY    ((ushort)0x0004)        /* Busy.  Rx Frame dropped */
+#define FCC_ENET_TXB    ((ushort)0x0002)        /* A buffer was transmitted */
+#define FCC_ENET_RXB    ((ushort)0x0001)        /* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC    ((uint)0x80000000)      /* Enable heartbeat */
+#define FCC_PSMR_FC     ((uint)0x40000000)      /* Force Collision */
+#define FCC_PSMR_SBT    ((uint)0x20000000)      /* Stop backoff timer */
+#define FCC_PSMR_LPB    ((uint)0x10000000)      /* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW    ((uint)0x08000000)      /* Late collision select */
+#define FCC_PSMR_FDE    ((uint)0x04000000)      /* Full Duplex Enable */
+#define FCC_PSMR_MON    ((uint)0x02000000)      /* RMON Enable */
+#define FCC_PSMR_PRO    ((uint)0x00400000)      /* Promiscuous Enable */
+#define FCC_PSMR_FCE    ((uint)0x00200000)      /* Flow Control Enable */
+#define FCC_PSMR_RSH    ((uint)0x00100000)      /* Receive Short Frames */
+#define FCC_PSMR_CAM    ((uint)0x00000400)      /* CAM enable */
+#define FCC_PSMR_BRO    ((uint)0x00000200)      /* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC  ((uint)0x00000080)      /* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+        ushort  iic_rbase;      /* Rx Buffer descriptor base address */
+        ushort  iic_tbase;      /* Tx Buffer descriptor base address */
+        u_char  iic_rfcr;       /* Rx function code */
+        u_char  iic_tfcr;       /* Tx function code */
+        ushort  iic_mrblr;      /* Max receive buffer length */
+        uint    iic_rstate;     /* Internal */
+        uint    iic_rdp;        /* Internal */
+        ushort  iic_rbptr;      /* Internal */
+        ushort  iic_rbc;        /* Internal */
+        uint    iic_rxtmp;      /* Internal */
+        uint    iic_tstate;     /* Internal */
+        uint    iic_tdp;        /* Internal */
+        ushort  iic_tbptr;      /* Internal */
+        ushort  iic_tbc;        /* Internal */
+        uint    iic_txtmp;      /* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+        ushort  spi_rbase;      /* Rx Buffer descriptor base address */
+        ushort  spi_tbase;      /* Tx Buffer descriptor base address */
+        u_char  spi_rfcr;       /* Rx function code */
+        u_char  spi_tfcr;       /* Tx function code */
+        ushort  spi_mrblr;      /* Max receive buffer length */
+        uint    spi_rstate;     /* Internal */
+        uint    spi_rdp;        /* Internal */
+        ushort  spi_rbptr;      /* Internal */
+        ushort  spi_rbc;        /* Internal */
+        uint    spi_rxtmp;      /* Internal */
+        uint    spi_tstate;     /* Internal */
+        uint    spi_tdp;        /* Internal */
+        ushort  spi_tbptr;      /* Internal */
+        ushort  spi_tbc;        /* Internal */
+        uint    spi_txtmp;      /* Internal */
+        uint    spi_res;        /* Tx temp. */
+        uint    spi_res1[4];    /* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP     ((ushort)0x4000)        /* Loopback */
+#define SPMODE_CI       ((ushort)0x2000)        /* Clock Invert */
+#define SPMODE_CP       ((ushort)0x1000)        /* Clock Phase */
+#define SPMODE_DIV16    ((ushort)0x0800)        /* BRG/16 mode */
+#define SPMODE_REV      ((ushort)0x0400)        /* Reversed Data */
+#define SPMODE_MSTR     ((ushort)0x0200)        /* SPI Master */
+#define SPMODE_EN       ((ushort)0x0100)        /* Enable */
+#define SPMODE_LENMSK   ((ushort)0x00f0)        /* character length */
+#define SPMODE_PMMSK    ((ushort)0x000f)        /* prescale modulus */
+
+#define SPMODE_LEN(x)   ((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x)    ((x) &0xF)
+
+#define SPI_EB          ((u_char)0x10)          /* big endian byte order */
+
+#define BD_IIC_START            ((ushort)0x0400)
+
+/* IDMA parameter RAM
+*/
+typedef struct idma {
+        ushort ibase;           /* IDMA buffer descriptor table base address */
+        ushort dcm;             /* DMA channel mode */
+        ushort ibdptr;          /* IDMA current buffer descriptor pointer */
+        ushort dpr_buf;         /* IDMA transfer buffer base address */
+        ushort buf_inv;         /* internal buffer inventory */
+        ushort ss_max;          /* steady-state maximum transfer size */
+        ushort dpr_in_ptr;      /* write pointer inside the internal buffer */
+        ushort sts;             /* source transfer size */
+        ushort dpr_out_ptr;     /* read pointer inside the internal buffer */
+        ushort seob;            /* source end of burst */
+        ushort deob;            /* destination end of burst */
+        ushort dts;             /* destination transfer size */
+        ushort ret_add;         /* return address when working in ERM=1 mode */
+        ushort res0;            /* reserved */
+        uint   bd_cnt;          /* internal byte count */
+        uint   s_ptr;           /* source internal data pointer */
+        uint   d_ptr;           /* destination internal data pointer */
+        uint   istate;          /* internal state */
+        u_char res1[20];        /* pad to 64-byte length */
+} idma_t;
+
+/* DMA channel mode bit fields
+*/
+#define IDMA_DCM_FB             ((ushort)0x8000) /* fly-by mode */
+#define IDMA_DCM_LP             ((ushort)0x4000) /* low priority */
+#define IDMA_DCM_TC2            ((ushort)0x0400) /* value driven on TC[2] */
+#define IDMA_DCM_DMA_WRAP_MASK  ((ushort)0x01c0) /* mask for DMA wrap */
+#define IDMA_DCM_DMA_WRAP_64    ((ushort)0x0000) /* 64-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_128   ((ushort)0x0040) /* 128-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_256   ((ushort)0x0080) /* 256-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_512   ((ushort)0x00c0) /* 512-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_1024  ((ushort)0x0100) /* 1024-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_2048  ((ushort)0x0140) /* 2048-byte DMA xfer buffer */
+#define IDMA_DCM_SINC           ((ushort)0x0020) /* source inc addr */
+#define IDMA_DCM_DINC           ((ushort)0x0010) /* destination inc addr */
+#define IDMA_DCM_ERM            ((ushort)0x0008) /* external request mode */
+#define IDMA_DCM_DT             ((ushort)0x0004) /* DONE treatment */
+#define IDMA_DCM_SD_MASK        ((ushort)0x0003) /* mask for SD bit field */
+#define IDMA_DCM_SD_MEM2MEM     ((ushort)0x0000) /* memory-to-memory xfer */
+#define IDMA_DCM_SD_PER2MEM     ((ushort)0x0002) /* peripheral-to-memory xfer */
+#define IDMA_DCM_SD_MEM2PER     ((ushort)0x0001) /* memory-to-peripheral xfer */
+
+/* IDMA Buffer Descriptors
+*/
+typedef struct idma_bd {
+        uint flags;
+        uint len;       /* data length */
+        uint src;       /* source data buffer pointer */
+        uint dst;       /* destination data buffer pointer */
+} idma_bd_t;
+
+/* IDMA buffer descriptor flag bit fields
+*/
+#define IDMA_BD_V       ((uint)0x80000000)      /* valid */
+#define IDMA_BD_W       ((uint)0x20000000)      /* wrap */
+#define IDMA_BD_I       ((uint)0x10000000)      /* interrupt */
+#define IDMA_BD_L       ((uint)0x08000000)      /* last */
+#define IDMA_BD_CM      ((uint)0x02000000)      /* continuous mode */
+#define IDMA_BD_SDN     ((uint)0x00400000)      /* source done */
+#define IDMA_BD_DDN     ((uint)0x00200000)      /* destination done */
+#define IDMA_BD_DGBL    ((uint)0x00100000)      /* destination global */
+#define IDMA_BD_DBO_LE  ((uint)0x00040000)      /* little-end dest byte order */
+#define IDMA_BD_DBO_BE  ((uint)0x00080000)      /* big-end dest byte order */
+#define IDMA_BD_DDTB    ((uint)0x00010000)      /* destination data bus */
+#define IDMA_BD_SGBL    ((uint)0x00002000)      /* source global */
+#define IDMA_BD_SBO_LE  ((uint)0x00000800)      /* little-end src byte order */
+#define IDMA_BD_SBO_BE  ((uint)0x00001000)      /* big-end src byte order */
+#define IDMA_BD_SDTB    ((uint)0x00000200)      /* source data bus */
+
+/* per-channel IDMA registers
+*/
+typedef struct im_idma {
+        u_char idsr;                    /* IDMAn event status register */
+        u_char res0[3];
+        u_char idmr;                    /* IDMAn event mask register */
+        u_char res1[3];
+} im_idma_t;
+
+/* IDMA event register bit fields
+*/
+#define IDMA_EVENT_SC   ((unsigned char)0x08)   /* stop completed */
+#define IDMA_EVENT_OB   ((unsigned char)0x04)   /* out of buffers */
+#define IDMA_EVENT_EDN  ((unsigned char)0x02)   /* external DONE asserted */
+#define IDMA_EVENT_BC   ((unsigned char)0x01)   /* buffer descriptor complete */
+
+/* RISC Controller Configuration Register (RCCR) bit fields
+*/
+#define RCCR_TIME       ((uint)0x80000000) /* timer enable */
+#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */
+#define RCCR_DR0M       ((uint)0x00800000) /* IDMA0 request mode */
+#define RCCR_DR1M       ((uint)0x00400000) /* IDMA1 request mode */
+#define RCCR_DR2M       ((uint)0x00000080) /* IDMA2 request mode */
+#define RCCR_DR3M       ((uint)0x00000040) /* IDMA3 request mode */
+#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */
+#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
+#define RCCR_DR0QP_MED  ((uint)0x00100000) /* IDMA0 has medium req priority */
+#define RCCR_DR0QP_LOW  ((uint)0x00200000) /* IDMA0 has low req priority */
+#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */
+#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
+#define RCCR_DR1QP_MED  ((uint)0x00010000) /* IDMA1 has medium req priority */
+#define RCCR_DR1QP_LOW  ((uint)0x00020000) /* IDMA1 has low req priority */
+#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */
+#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
+#define RCCR_DR2QP_MED  ((uint)0x00000010) /* IDMA2 has medium req priority */
+#define RCCR_DR2QP_LOW  ((uint)0x00000020) /* IDMA2 has low req priority */
+#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */
+#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
+#define RCCR_DR3QP_MED  ((uint)0x00000001) /* IDMA3 has medium req priority */
+#define RCCR_DR3QP_LOW  ((uint)0x00000002) /* IDMA3 has low req priority */
+#define RCCR_EIE        ((uint)0x00080000) /* external interrupt enable */
+#define RCCR_SCD        ((uint)0x00040000) /* scheduler configuration */
+#define RCCR_ERAM_MASK  ((uint)0x0000e000) /* mask for enable RAM microcode */
+#define RCCR_ERAM_0KB   ((uint)0x00000000) /* use 0KB of dpram for microcode */
+#define RCCR_ERAM_2KB   ((uint)0x00002000) /* use 2KB of dpram for microcode */
+#define RCCR_ERAM_4KB   ((uint)0x00004000) /* use 4KB of dpram for microcode */
+#define RCCR_ERAM_6KB   ((uint)0x00006000) /* use 6KB of dpram for microcode */
+#define RCCR_ERAM_8KB   ((uint)0x00008000) /* use 8KB of dpram for microcode */
+#define RCCR_ERAM_10KB  ((uint)0x0000a000) /* use 10KB of dpram for microcode */
+#define RCCR_ERAM_12KB  ((uint)0x0000c000) /* use 12KB of dpram for microcode */
+#define RCCR_EDM0       ((uint)0x00000800) /* DREQ0 edge detect mode */
+#define RCCR_EDM1       ((uint)0x00000400) /* DREQ1 edge detect mode */
+#define RCCR_EDM2       ((uint)0x00000200) /* DREQ2 edge detect mode */
+#define RCCR_EDM3       ((uint)0x00000100) /* DREQ3 edge detect mode */
+#define RCCR_DEM01      ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
+#define RCCR_DEM23      ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
+
+/*-----------------------------------------------------------------------
+ * CMXFCR - CMX FCC Clock Route Register
+ */
+#define CMXFCR_FC1         0x40000000   /* FCC1 connection              */
+#define CMXFCR_RF1CS_MSK   0x38000000   /* Receive FCC1 Clock Source Mask */
+#define CMXFCR_TF1CS_MSK   0x07000000   /* Transmit FCC1 Clock Source Mask */
+#define CMXFCR_FC2         0x00400000   /* FCC2 connection              */
+#define CMXFCR_RF2CS_MSK   0x00380000   /* Receive FCC2 Clock Source Mask */
+#define CMXFCR_TF2CS_MSK   0x00070000   /* Transmit FCC2 Clock Source Mask */
+#define CMXFCR_FC3         0x00004000   /* FCC3 connection              */
+#define CMXFCR_RF3CS_MSK   0x00003800   /* Receive FCC3 Clock Source Mask */
+#define CMXFCR_TF3CS_MSK   0x00000700   /* Transmit FCC3 Clock Source Mask */
+
+#define CMXFCR_RF1CS_BRG5  0x00000000   /* Receive FCC1 Clock Source is BRG5 */
+#define CMXFCR_RF1CS_BRG6  0x08000000   /* Receive FCC1 Clock Source is BRG6 */
+#define CMXFCR_RF1CS_BRG7  0x10000000   /* Receive FCC1 Clock Source is BRG7 */
+#define CMXFCR_RF1CS_BRG8  0x18000000   /* Receive FCC1 Clock Source is BRG8 */
+#define CMXFCR_RF1CS_CLK9  0x20000000   /* Receive FCC1 Clock Source is CLK9 */
+#define CMXFCR_RF1CS_CLK10 0x28000000   /* Receive FCC1 Clock Source is CLK10 */
+#define CMXFCR_RF1CS_CLK11 0x30000000   /* Receive FCC1 Clock Source is CLK11 */
+#define CMXFCR_RF1CS_CLK12 0x38000000   /* Receive FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_TF1CS_BRG5  0x00000000   /* Transmit FCC1 Clock Source is BRG5 */
+#define CMXFCR_TF1CS_BRG6  0x01000000   /* Transmit FCC1 Clock Source is BRG6 */
+#define CMXFCR_TF1CS_BRG7  0x02000000   /* Transmit FCC1 Clock Source is BRG7 */
+#define CMXFCR_TF1CS_BRG8  0x03000000   /* Transmit FCC1 Clock Source is BRG8 */
+#define CMXFCR_TF1CS_CLK9  0x04000000   /* Transmit FCC1 Clock Source is CLK9 */
+#define CMXFCR_TF1CS_CLK10 0x05000000   /* Transmit FCC1 Clock Source is CLK10 */
+#define CMXFCR_TF1CS_CLK11 0x06000000   /* Transmit FCC1 Clock Source is CLK11 */
+#define CMXFCR_TF1CS_CLK12 0x07000000   /* Transmit FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_RF2CS_BRG5  0x00000000   /* Receive FCC2 Clock Source is BRG5 */
+#define CMXFCR_RF2CS_BRG6  0x00080000   /* Receive FCC2 Clock Source is BRG6 */
+#define CMXFCR_RF2CS_BRG7  0x00100000   /* Receive FCC2 Clock Source is BRG7 */
+#define CMXFCR_RF2CS_BRG8  0x00180000   /* Receive FCC2 Clock Source is BRG8 */
+#define CMXFCR_RF2CS_CLK13 0x00200000   /* Receive FCC2 Clock Source is CLK13 */
+#define CMXFCR_RF2CS_CLK14 0x00280000   /* Receive FCC2 Clock Source is CLK14 */
+#define CMXFCR_RF2CS_CLK15 0x00300000   /* Receive FCC2 Clock Source is CLK15 */
+#define CMXFCR_RF2CS_CLK16 0x00380000   /* Receive FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_TF2CS_BRG5  0x00000000   /* Transmit FCC2 Clock Source is BRG5 */
+#define CMXFCR_TF2CS_BRG6  0x00010000   /* Transmit FCC2 Clock Source is BRG6 */
+#define CMXFCR_TF2CS_BRG7  0x00020000   /* Transmit FCC2 Clock Source is BRG7 */
+#define CMXFCR_TF2CS_BRG8  0x00030000   /* Transmit FCC2 Clock Source is BRG8 */
+#define CMXFCR_TF2CS_CLK13 0x00040000   /* Transmit FCC2 Clock Source is CLK13 */
+#define CMXFCR_TF2CS_CLK14 0x00050000   /* Transmit FCC2 Clock Source is CLK14 */
+#define CMXFCR_TF2CS_CLK15 0x00060000   /* Transmit FCC2 Clock Source is CLK15 */
+#define CMXFCR_TF2CS_CLK16 0x00070000   /* Transmit FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_RF3CS_BRG5  0x00000000   /* Receive FCC3 Clock Source is BRG5 */
+#define CMXFCR_RF3CS_BRG6  0x00000800   /* Receive FCC3 Clock Source is BRG6 */
+#define CMXFCR_RF3CS_BRG7  0x00001000   /* Receive FCC3 Clock Source is BRG7 */
+#define CMXFCR_RF3CS_BRG8  0x00001800   /* Receive FCC3 Clock Source is BRG8 */
+#define CMXFCR_RF3CS_CLK13 0x00002000   /* Receive FCC3 Clock Source is CLK13 */
+#define CMXFCR_RF3CS_CLK14 0x00002800   /* Receive FCC3 Clock Source is CLK14 */
+#define CMXFCR_RF3CS_CLK15 0x00003000   /* Receive FCC3 Clock Source is CLK15 */
+#define CMXFCR_RF3CS_CLK16 0x00003800   /* Receive FCC3 Clock Source is CLK16 */
+
+#define CMXFCR_TF3CS_BRG5  0x00000000   /* Transmit FCC3 Clock Source is BRG5 */
+#define CMXFCR_TF3CS_BRG6  0x00000100   /* Transmit FCC3 Clock Source is BRG6 */
+#define CMXFCR_TF3CS_BRG7  0x00000200   /* Transmit FCC3 Clock Source is BRG7 */
+#define CMXFCR_TF3CS_BRG8  0x00000300   /* Transmit FCC3 Clock Source is BRG8 */
+#define CMXFCR_TF3CS_CLK13 0x00000400   /* Transmit FCC3 Clock Source is CLK13 */
+#define CMXFCR_TF3CS_CLK14 0x00000500   /* Transmit FCC3 Clock Source is CLK14 */
+#define CMXFCR_TF3CS_CLK15 0x00000600   /* Transmit FCC3 Clock Source is CLK15 */
+#define CMXFCR_TF3CS_CLK16 0x00000700   /* Transmit FCC3 Clock Source is CLK16 */
+
+/*-----------------------------------------------------------------------
+ * CMXSCR - CMX SCC Clock Route Register
+ */
+#define CMXSCR_GR1         0x80000000   /* Grant Support of SCC1        */
+#define CMXSCR_SC1         0x40000000   /* SCC1 connection              */
+#define CMXSCR_RS1CS_MSK   0x38000000   /* Receive SCC1 Clock Source Mask */
+#define CMXSCR_TS1CS_MSK   0x07000000   /* Transmit SCC1 Clock Source Mask */
+#define CMXSCR_GR2         0x00800000   /* Grant Support of SCC2        */
+#define CMXSCR_SC2         0x00400000   /* SCC2 connection              */
+#define CMXSCR_RS2CS_MSK   0x00380000   /* Receive SCC2 Clock Source Mask */
+#define CMXSCR_TS2CS_MSK   0x00070000   /* Transmit SCC2 Clock Source Mask */
+#define CMXSCR_GR3         0x00008000   /* Grant Support of SCC3        */
+#define CMXSCR_SC3         0x00004000   /* SCC3 connection              */
+#define CMXSCR_RS3CS_MSK   0x00003800   /* Receive SCC3 Clock Source Mask */
+#define CMXSCR_TS3CS_MSK   0x00000700   /* Transmit SCC3 Clock Source Mask */
+#define CMXSCR_GR4         0x00000080   /* Grant Support of SCC4        */
+#define CMXSCR_SC4         0x00000040   /* SCC4 connection              */
+#define CMXSCR_RS4CS_MSK   0x00000038   /* Receive SCC4 Clock Source Mask */
+#define CMXSCR_TS4CS_MSK   0x00000007   /* Transmit SCC4 Clock Source Mask */
+
+#define CMXSCR_RS1CS_BRG1  0x00000000   /* SCC1 Rx Clock Source is BRG1 */
+#define CMXSCR_RS1CS_BRG2  0x08000000   /* SCC1 Rx Clock Source is BRG2 */
+#define CMXSCR_RS1CS_BRG3  0x10000000   /* SCC1 Rx Clock Source is BRG3 */
+#define CMXSCR_RS1CS_BRG4  0x18000000   /* SCC1 Rx Clock Source is BRG4 */
+#define CMXSCR_RS1CS_CLK11 0x20000000   /* SCC1 Rx Clock Source is CLK11 */
+#define CMXSCR_RS1CS_CLK12 0x28000000   /* SCC1 Rx Clock Source is CLK12 */
+#define CMXSCR_RS1CS_CLK3  0x30000000   /* SCC1 Rx Clock Source is CLK3 */
+#define CMXSCR_RS1CS_CLK4  0x38000000   /* SCC1 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS1CS_BRG1  0x00000000   /* SCC1 Tx Clock Source is BRG1 */
+#define CMXSCR_TS1CS_BRG2  0x01000000   /* SCC1 Tx Clock Source is BRG2 */
+#define CMXSCR_TS1CS_BRG3  0x02000000   /* SCC1 Tx Clock Source is BRG3 */
+#define CMXSCR_TS1CS_BRG4  0x03000000   /* SCC1 Tx Clock Source is BRG4 */
+#define CMXSCR_TS1CS_CLK11 0x04000000   /* SCC1 Tx Clock Source is CLK11 */
+#define CMXSCR_TS1CS_CLK12 0x05000000   /* SCC1 Tx Clock Source is CLK12 */
+#define CMXSCR_TS1CS_CLK3  0x06000000   /* SCC1 Tx Clock Source is CLK3 */
+#define CMXSCR_TS1CS_CLK4  0x07000000   /* SCC1 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS2CS_BRG1  0x00000000   /* SCC2 Rx Clock Source is BRG1 */
+#define CMXSCR_RS2CS_BRG2  0x00080000   /* SCC2 Rx Clock Source is BRG2 */
+#define CMXSCR_RS2CS_BRG3  0x00100000   /* SCC2 Rx Clock Source is BRG3 */
+#define CMXSCR_RS2CS_BRG4  0x00180000   /* SCC2 Rx Clock Source is BRG4 */
+#define CMXSCR_RS2CS_CLK11 0x00200000   /* SCC2 Rx Clock Source is CLK11 */
+#define CMXSCR_RS2CS_CLK12 0x00280000   /* SCC2 Rx Clock Source is CLK12 */
+#define CMXSCR_RS2CS_CLK3  0x00300000   /* SCC2 Rx Clock Source is CLK3 */
+#define CMXSCR_RS2CS_CLK4  0x00380000   /* SCC2 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS2CS_BRG1  0x00000000   /* SCC2 Tx Clock Source is BRG1 */
+#define CMXSCR_TS2CS_BRG2  0x00010000   /* SCC2 Tx Clock Source is BRG2 */
+#define CMXSCR_TS2CS_BRG3  0x00020000   /* SCC2 Tx Clock Source is BRG3 */
+#define CMXSCR_TS2CS_BRG4  0x00030000   /* SCC2 Tx Clock Source is BRG4 */
+#define CMXSCR_TS2CS_CLK11 0x00040000   /* SCC2 Tx Clock Source is CLK11 */
+#define CMXSCR_TS2CS_CLK12 0x00050000   /* SCC2 Tx Clock Source is CLK12 */
+#define CMXSCR_TS2CS_CLK3  0x00060000   /* SCC2 Tx Clock Source is CLK3 */
+#define CMXSCR_TS2CS_CLK4  0x00070000   /* SCC2 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS3CS_BRG1  0x00000000   /* SCC3 Rx Clock Source is BRG1 */
+#define CMXSCR_RS3CS_BRG2  0x00000800   /* SCC3 Rx Clock Source is BRG2 */
+#define CMXSCR_RS3CS_BRG3  0x00001000   /* SCC3 Rx Clock Source is BRG3 */
+#define CMXSCR_RS3CS_BRG4  0x00001800   /* SCC3 Rx Clock Source is BRG4 */
+#define CMXSCR_RS3CS_CLK5  0x00002000   /* SCC3 Rx Clock Source is CLK5 */
+#define CMXSCR_RS3CS_CLK6  0x00002800   /* SCC3 Rx Clock Source is CLK6 */
+#define CMXSCR_RS3CS_CLK7  0x00003000   /* SCC3 Rx Clock Source is CLK7 */
+#define CMXSCR_RS3CS_CLK8  0x00003800   /* SCC3 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS3CS_BRG1  0x00000000   /* SCC3 Tx Clock Source is BRG1 */
+#define CMXSCR_TS3CS_BRG2  0x00000100   /* SCC3 Tx Clock Source is BRG2 */
+#define CMXSCR_TS3CS_BRG3  0x00000200   /* SCC3 Tx Clock Source is BRG3 */
+#define CMXSCR_TS3CS_BRG4  0x00000300   /* SCC3 Tx Clock Source is BRG4 */
+#define CMXSCR_TS3CS_CLK5  0x00000400   /* SCC3 Tx Clock Source is CLK5 */
+#define CMXSCR_TS3CS_CLK6  0x00000500   /* SCC3 Tx Clock Source is CLK6 */
+#define CMXSCR_TS3CS_CLK7  0x00000600   /* SCC3 Tx Clock Source is CLK7 */
+#define CMXSCR_TS3CS_CLK8  0x00000700   /* SCC3 Tx Clock Source is CLK8 */
+
+#define CMXSCR_RS4CS_BRG1  0x00000000   /* SCC4 Rx Clock Source is BRG1 */
+#define CMXSCR_RS4CS_BRG2  0x00000008   /* SCC4 Rx Clock Source is BRG2 */
+#define CMXSCR_RS4CS_BRG3  0x00000010   /* SCC4 Rx Clock Source is BRG3 */
+#define CMXSCR_RS4CS_BRG4  0x00000018   /* SCC4 Rx Clock Source is BRG4 */
+#define CMXSCR_RS4CS_CLK5  0x00000020   /* SCC4 Rx Clock Source is CLK5 */
+#define CMXSCR_RS4CS_CLK6  0x00000028   /* SCC4 Rx Clock Source is CLK6 */
+#define CMXSCR_RS4CS_CLK7  0x00000030   /* SCC4 Rx Clock Source is CLK7 */
+#define CMXSCR_RS4CS_CLK8  0x00000038   /* SCC4 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS4CS_BRG1  0x00000000   /* SCC4 Tx Clock Source is BRG1 */
+#define CMXSCR_TS4CS_BRG2  0x00000001   /* SCC4 Tx Clock Source is BRG2 */
+#define CMXSCR_TS4CS_BRG3  0x00000002   /* SCC4 Tx Clock Source is BRG3 */
+#define CMXSCR_TS4CS_BRG4  0x00000003   /* SCC4 Tx Clock Source is BRG4 */
+#define CMXSCR_TS4CS_CLK5  0x00000004   /* SCC4 Tx Clock Source is CLK5 */
+#define CMXSCR_TS4CS_CLK6  0x00000005   /* SCC4 Tx Clock Source is CLK6 */
+#define CMXSCR_TS4CS_CLK7  0x00000006   /* SCC4 Tx Clock Source is CLK7 */
+#define CMXSCR_TS4CS_CLK8  0x00000007   /* SCC4 Tx Clock Source is CLK8 */
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration Register                            4-31
+ */
+#define SIUMCR_BBD      0x80000000      /* Bus Busy Disable             */
+#define SIUMCR_ESE      0x40000000      /* External Snoop Enable        */
+#define SIUMCR_PBSE     0x20000000      /* Parity Byte Select Enable    */
+#define SIUMCR_CDIS     0x10000000      /* Core Disable                 */
+#define SIUMCR_DPPC00   0x00000000      /* Data Parity Pins Configuration*/
+#define SIUMCR_DPPC01   0x04000000      /* - " -                        */
+#define SIUMCR_DPPC10   0x08000000      /* - " -                        */
+#define SIUMCR_DPPC11   0x0c000000      /* - " -                        */
+#define SIUMCR_L2CPC00  0x00000000      /* L2 Cache Pins Configuration  */
+#define SIUMCR_L2CPC01  0x01000000      /* - " -                        */
+#define SIUMCR_L2CPC10  0x02000000      /* - " -                        */
+#define SIUMCR_L2CPC11  0x03000000      /* - " -                        */
+#define SIUMCR_LBPC00   0x00000000      /* Local Bus Pins Configuration */
+#define SIUMCR_LBPC01   0x00400000      /* - " -                        */
+#define SIUMCR_LBPC10   0x00800000      /* - " -                        */
+#define SIUMCR_LBPC11   0x00c00000      /* - " -                        */
+#define SIUMCR_APPC00   0x00000000      /* Address Parity Pins Configuration*/
+#define SIUMCR_APPC01   0x00100000      /* - " -                        */
+#define SIUMCR_APPC10   0x00200000      /* - " -                        */
+#define SIUMCR_APPC11   0x00300000      /* - " -                        */
+#define SIUMCR_CS10PC00 0x00000000      /* CS10 Pin Configuration       */
+#define SIUMCR_CS10PC01 0x00040000      /* - " -                        */
+#define SIUMCR_CS10PC10 0x00080000      /* - " -                        */
+#define SIUMCR_CS10PC11 0x000c0000      /* - " -                        */
+#define SIUMCR_BCTLC00  0x00000000      /* Buffer Control Configuration */
+#define SIUMCR_BCTLC01  0x00010000      /* - " -                        */
+#define SIUMCR_BCTLC10  0x00020000      /* - " -                        */
+#define SIUMCR_BCTLC11  0x00030000      /* - " -                        */
+#define SIUMCR_MMR00    0x00000000      /* Mask Masters Requests        */
+#define SIUMCR_MMR01    0x00004000      /* - " -                        */
+#define SIUMCR_MMR10    0x00008000      /* - " -                        */
+#define SIUMCR_MMR11    0x0000c000      /* - " -                        */
+#define SIUMCR_LPBSE    0x00002000      /* LocalBus Parity Byte Select Enable*/
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control Register                                  9-8
+*/
+#define SCCR_PCI_MODE   0x00000100      /* PCI Mode     */
+#define SCCR_PCI_MODCK  0x00000080      /* Value of PCI_MODCK pin       */
+#define SCCR_PCIDF_MSK  0x00000078      /* PCI division factor  */
+#define SCCR_PCIDF_SHIFT 3
+
+#ifndef CPM_IMMR_OFFSET
+#define CPM_IMMR_OFFSET 0x101a8
+#endif
+
+#define FCC_PSMR_RMII   ((uint)0x00020000)      /* Use RMII interface */
+
+/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
+ * in order to use clock-computing stuff below for the FCC x
+ */
+
+/* Automatically generates register configurations */
+#define PC_CLK(x)       ((uint)(1<<(x-1)))      /* FCC CLK I/O ports */
+
+#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27))     /* FCC1 Receive Clock Source */
+#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24))     /* FCC1 Transmit Clock Source */
+#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19))     /* FCC2 Receive Clock Source */
+#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))     /* FCC2 Transmit Clock Source */
+#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11))     /* FCC3 Receive Clock Source */
+#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))      /* FCC3 Transmit Clock Source */
+
+#define PC_F1RXCLK      PC_CLK(F1_RXCLK)
+#define PC_F1TXCLK      PC_CLK(F1_TXCLK)
+#define CMX1_CLK_ROUTE  (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
+#define CMX1_CLK_MASK   ((uint)0xff000000)
+
+#define PC_F2RXCLK      PC_CLK(F2_RXCLK)
+#define PC_F2TXCLK      PC_CLK(F2_TXCLK)
+#define CMX2_CLK_ROUTE  (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
+#define CMX2_CLK_MASK   ((uint)0x00ff0000)
+
+#define PC_F3RXCLK      PC_CLK(F3_RXCLK)
+#define PC_F3TXCLK      PC_CLK(F3_TXCLK)
+#define CMX3_CLK_ROUTE  (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
+#define CMX3_CLK_MASK   ((uint)0x0000ff00)
+
+#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
+#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
+
+#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
+
+/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PA1_COL         0x00000001U
+#define PA1_CRS         0x00000002U
+#define PA1_TXER        0x00000004U
+#define PA1_TXEN        0x00000008U
+#define PA1_RXDV        0x00000010U
+#define PA1_RXER        0x00000020U
+#define PA1_TXDAT       0x00003c00U
+#define PA1_RXDAT       0x0003c000U
+#define PA1_PSORA0      (PA1_RXDAT | PA1_TXDAT)
+#define PA1_PSORA1      (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
+                PA1_RXDV | PA1_RXER)
+#define PA1_DIRA0       (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
+#define PA1_DIRA1       (PA1_TXDAT | PA1_TXEN | PA1_TXER)
+
+
+/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB2_TXER        0x00000001U
+#define PB2_RXDV        0x00000002U
+#define PB2_TXEN        0x00000004U
+#define PB2_RXER        0x00000008U
+#define PB2_COL         0x00000010U
+#define PB2_CRS         0x00000020U
+#define PB2_TXDAT       0x000003c0U
+#define PB2_RXDAT       0x00003c00U
+#define PB2_PSORB0      (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
+                PB2_RXER | PB2_RXDV | PB2_TXER)
+#define PB2_PSORB1      (PB2_TXEN)
+#define PB2_DIRB0       (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
+#define PB2_DIRB1       (PB2_TXDAT | PB2_TXEN | PB2_TXER)
+
+
+/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB3_RXDV        0x00004000U
+#define PB3_RXER        0x00008000U
+#define PB3_TXER        0x00010000U
+#define PB3_TXEN        0x00020000U
+#define PB3_COL         0x00040000U
+#define PB3_CRS         0x00080000U
+#define PB3_TXDAT       0x0f000000U
+#define PC3_TXDAT       0x00000010U
+#define PB3_RXDAT       0x00f00000U
+#define PB3_PSORB0      (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
+                PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
+#define PB3_PSORB1      0
+#define PB3_DIRB0       (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
+#define PB3_DIRB1       (PB3_TXDAT | PB3_TXEN | PB3_TXER)
+#define PC3_DIRC1       (PC3_TXDAT)
+
+/* Handy macro to specify mem for FCCs*/
+#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
+#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
+#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
+
+/* Clocks and GRG's */
+
+enum cpm_clk_dir {
+        CPM_CLK_RX,
+        CPM_CLK_TX,
+        CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+        CPM_CLK_SCC1,
+        CPM_CLK_SCC2,
+        CPM_CLK_SCC3,
+        CPM_CLK_SCC4,
+        CPM_CLK_FCC1,
+        CPM_CLK_FCC2,
+        CPM_CLK_FCC3,
+        CPM_CLK_SMC1,
+        CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+        CPM_CLK_NONE = 0,
+        CPM_BRG1,       /* Baud Rate Generator  1 */
+        CPM_BRG2,       /* Baud Rate Generator  2 */
+        CPM_BRG3,       /* Baud Rate Generator  3 */
+        CPM_BRG4,       /* Baud Rate Generator  4 */
+        CPM_BRG5,       /* Baud Rate Generator  5 */
+        CPM_BRG6,       /* Baud Rate Generator  6 */
+        CPM_BRG7,       /* Baud Rate Generator  7 */
+        CPM_BRG8,       /* Baud Rate Generator  8 */
+        CPM_CLK1,       /* Clock  1 */
+        CPM_CLK2,       /* Clock  2 */
+        CPM_CLK3,       /* Clock  3 */
+        CPM_CLK4,       /* Clock  4 */
+        CPM_CLK5,       /* Clock  5 */
+        CPM_CLK6,       /* Clock  6 */
+        CPM_CLK7,       /* Clock  7 */
+        CPM_CLK8,       /* Clock  8 */
+        CPM_CLK9,       /* Clock  9 */
+        CPM_CLK10,      /* Clock 10 */
+        CPM_CLK11,      /* Clock 11 */
+        CPM_CLK12,      /* Clock 12 */
+        CPM_CLK13,      /* Clock 13 */
+        CPM_CLK14,      /* Clock 14 */
+        CPM_CLK15,      /* Clock 15 */
+        CPM_CLK16,      /* Clock 16 */
+        CPM_CLK17,      /* Clock 17 */
+        CPM_CLK18,      /* Clock 18 */
+        CPM_CLK19,      /* Clock 19 */
+        CPM_CLK20,      /* Clock 20 */
+        CPM_CLK_DUMMY
+};
+
+extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
+extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
+
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+void cpm2_set_pin(int port, int pin, int flags);
+
+#endif /* __CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 3dc8e2dfca84..ae093ef68363 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -57,6 +57,7 @@ enum powerpc_pmc_type {
         PPC_PMC_PA6T = 2,
 };
 
+/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
 struct cpu_spec {
         /* CPU is matched via (PVR & pvr_mask) == pvr_value */
         unsigned int    pvr_mask;
@@ -136,6 +137,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define CPU_FTR_REAL_LE                 ASM_CONST(0x0000000000400000)
 #define CPU_FTR_FPU_UNAVAILABLE         ASM_CONST(0x0000000000800000)
 #define CPU_FTR_UNIFIED_ID_CACHE        ASM_CONST(0x0000000001000000)
+#define CPU_FTR_SPE                     ASM_CONST(0x0000000002000000)
 
 /*
  * Add the 64-bit processor unique features in the top half of the word;
@@ -162,6 +164,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define CPU_FTR_CELL_TB_BUG             LONG_ASM_CONST(0x0000800000000000)
 #define CPU_FTR_SPURR                   LONG_ASM_CONST(0x0001000000000000)
 #define CPU_FTR_DSCR                    LONG_ASM_CONST(0x0002000000000000)
+#define CPU_FTR_1T_SEGMENT              LONG_ASM_CONST(0x0004000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -180,12 +183,27 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define PPC_FEATURE_HAS_ALTIVEC_COMP    0
 #endif
 
-/* We need to mark all pages as being coherent if we're SMP or we
- * have a 74[45]x and an MPC107 host bridge. Also 83xx requires
- * it for PCI "streaming/prefetch" to work properly.
+/* We only set the spe features if the kernel was compiled with spe
+ * support
+ */
+#ifdef CONFIG_SPE
+#define CPU_FTR_SPE_COMP        CPU_FTR_SPE
+#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE
+#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE
+#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE
+#else
+#define CPU_FTR_SPE_COMP        0
+#define PPC_FEATURE_HAS_SPE_COMP    0
+#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0
+#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0
+#endif
+
+/* We need to mark all pages as being coherent if we're SMP or we have a
+ * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
+ * require it for PCI "streaming/prefetch" to work properly.
  */
 #if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
-        || defined(CONFIG_PPC_83xx)
+        || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
 #define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
 #else
 #define CPU_FTR_COMMON                  0
@@ -297,7 +315,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
             CPU_FTR_PPC_LE)
 #define CPU_FTRS_82XX   (CPU_FTR_COMMON | \
             CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
-#define CPU_FTRS_G2_LE  (CPU_FTR_MAYBE_CAN_DOZE | \
+#define CPU_FTRS_G2_LE  (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
             CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
 #define CPU_FTRS_E300   (CPU_FTR_MAYBE_CAN_DOZE | \
             CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
@@ -310,10 +328,12 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define CPU_FTRS_8XX    (CPU_FTR_USE_TB)
 #define CPU_FTRS_40X    (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
 #define CPU_FTRS_44X    (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E200   (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
-            CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
-#define CPU_FTRS_E500   (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | \
+#define CPU_FTRS_E200   (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
+            CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
+            CPU_FTR_UNIFIED_ID_CACHE)
+#define CPU_FTRS_E500   (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
+            CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
             CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
 #define CPU_FTRS_GENERIC_32     (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
@@ -355,7 +375,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define CPU_FTRS_POSSIBLE       \
             (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |        \
             CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |       \
-            CPU_FTRS_CELL | CPU_FTRS_PA6T)
+            CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_1T_SEGMENT)
 #else
 enum {
         CPU_FTRS_POSSIBLE =
diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h
index 5dbfca8dde36..6b82c3ba495a 100644
--- a/include/asm-powerpc/dcr-mmio.h
+++ b/include/asm-powerpc/dcr-mmio.h
@@ -23,7 +23,11 @@
 
 #include <asm/io.h>
 
-typedef struct { void __iomem *token; unsigned int stride; } dcr_host_t;
+typedef struct {
+        void __iomem *token;
+        unsigned int stride;
+        unsigned int base;
+} dcr_host_t;
 
 #define DCR_MAP_OK(host)        ((host).token != NULL)
 
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
index 05af081222f6..f41058c0f6cb 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/include/asm-powerpc/dcr-native.h
@@ -22,11 +22,13 @@
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
-typedef struct {} dcr_host_t;
+typedef struct {
+        unsigned int base;
+} dcr_host_t;
 
 #define DCR_MAP_OK(host)        (1)
 
-#define dcr_map(dev, dcr_n, dcr_c)      ((dcr_host_t){})
+#define dcr_map(dev, dcr_n, dcr_c)      ((dcr_host_t){ .base = (dcr_n) })
 #define dcr_unmap(host, dcr_n, dcr_c)   do {} while (0)
 #define dcr_read(host, dcr_n)           mfdcr(dcr_n)
 #define dcr_write(host, dcr_n, value)   mtdcr(dcr_n, value)
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
index 744d6bb24116..d05891608f74 100644
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -249,8 +249,12 @@ dma_map_single(struct device *dev, void *ptr, size_t size,
         return virt_to_bus(ptr);
 }
 
-/* We do nothing. */
-#define dma_unmap_single(dev, addr, size, dir)  ((void)0)
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+                                    size_t size,
+                                    enum dma_data_direction direction)
+{
+        /* We do nothing. */
+}
 
 static inline dma_addr_t
 dma_map_page(struct device *dev, struct page *page,
@@ -264,8 +268,12 @@ dma_map_page(struct device *dev, struct page *page,
         return page_to_bus(page) + offset;
 }
 
-/* We do nothing. */
-#define dma_unmap_page(dev, handle, size, dir)  ((void)0)
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+                                  size_t size,
+                                  enum dma_data_direction direction)
+{
+        /* We do nothing. */
+}
 
 static inline int
 dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
@@ -284,8 +292,12 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
         return nents;
 }
 
-/* We don't do anything here. */
-#define dma_unmap_sg(dev, sg, nents, dir)       ((void)0)
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+                                int nhwentries,
+                                enum dma_data_direction direction)
+{
+        /* We don't do anything here. */
+}
 
 #endif /* CONFIG_PPC64 */
 
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
index de507995c7b1..e42820d6d25b 100644
--- a/include/asm-powerpc/elf.h
+++ b/include/asm-powerpc/elf.h
@@ -413,13 +413,8 @@ do {									\
 /* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
 #define NT_SPU          1
 
-extern int arch_notes_size(void);
-extern void arch_write_notes(struct file *file);
-
-#define ELF_CORE_EXTRA_NOTES_SIZE arch_notes_size()
-#define ELF_CORE_WRITE_EXTRA_NOTES arch_write_notes(file)
-
 #define ARCH_HAVE_EXTRA_ELF_NOTES
-#endif /* CONFIG_PPC_CELL */
+
+#endif /* CONFIG_SPU_BASE */
 
 #endif /* _ASM_POWERPC_ELF_H */
diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h
new file mode 100644
index 000000000000..39abdb02fdef
--- /dev/null
+++ b/include/asm-powerpc/exception.h
@@ -0,0 +1,311 @@
+#ifndef _ASM_POWERPC_EXCEPTION_H
+#define _ASM_POWERPC_EXCEPTION_H
+/*
+ * Extracted from head_64.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+/*
+ * The following macros define the code that appears as
+ * the prologue to each of the exception handlers.  They
+ * are split into two parts to allow a single kernel binary
+ * to be used for pSeries and iSeries.
+ *
+ * We make as much of the exception code common between native
+ * exception handlers (including pSeries LPAR) and iSeries LPAR
+ * implementations as possible.
+ */
+
+#define EX_R9           0
+#define EX_R10          8
+#define EX_R11          16
+#define EX_R12          24
+#define EX_R13          32
+#define EX_SRR0         40
+#define EX_DAR          48
+#define EX_DSISR        56
+#define EX_CCR          60
+#define EX_R3           64
+#define EX_LR           72
+
+/*
+ * We're short on space and time in the exception prolog, so we can't
+ * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
+ * low halfword of the address, but for Kdump we need the whole low
+ * word.
+ */
+#ifdef CONFIG_CRASH_DUMP
+#define LOAD_HANDLER(reg, label)                                        \
+        oris    reg,reg,(label)@h;      /* virt addr of handler ... */  \
+        ori     reg,reg,(label)@l;      /* .. and the rest */
+#else
+#define LOAD_HANDLER(reg, label)                                        \
+        ori     reg,reg,(label)@l;      /* virt addr of handler ... */
+#endif
+
+#define EXCEPTION_PROLOG_1(area)                                \
+        mfspr   r13,SPRN_SPRG3;         /* get paca address into r13 */ \
+        std     r9,area+EX_R9(r13);     /* save r9 - r12 */             \
+        std     r10,area+EX_R10(r13);                                   \
+        std     r11,area+EX_R11(r13);                                   \
+        std     r12,area+EX_R12(r13);                                   \
+        mfspr   r9,SPRN_SPRG1;                                          \
+        std     r9,area+EX_R13(r13);                                    \
+        mfcr    r9
+
+/*
+ * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
+ * The firmware calls the registered system_reset_fwnmi and
+ * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
+ * a 32bit application at the time of the event.
+ * This firmware bug is present on POWER4 and JS20.
+ */
+#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)               \
+        EXCEPTION_PROLOG_1(area);                                       \
+        clrrdi  r12,r13,32;             /* get high part of &label */   \
+        mfmsr   r10;                                                    \
+        /* force 64bit mode */                                          \
+        li      r11,5;                  /* MSR_SF_LG|MSR_ISF_LG */      \
+        rldimi  r10,r11,61,0;           /* insert into top 3 bits */    \
+        /* done 64bit mode */                                           \
+        mfspr   r11,SPRN_SRR0;          /* save SRR0 */                 \
+        LOAD_HANDLER(r12,label)                                         \
+        ori     r10,r10,MSR_IR|MSR_DR|MSR_RI;                           \
+        mtspr   SPRN_SRR0,r12;                                          \
+        mfspr   r12,SPRN_SRR1;          /* and SRR1 */                  \
+        mtspr   SPRN_SRR1,r10;                                          \
+        rfid;                                                           \
+        b       .       /* prevent speculative execution */
+
+#define EXCEPTION_PROLOG_PSERIES(area, label)                           \
+        EXCEPTION_PROLOG_1(area);                                       \
+        clrrdi  r12,r13,32;             /* get high part of &label */   \
+        mfmsr   r10;                                                    \
+        mfspr   r11,SPRN_SRR0;          /* save SRR0 */                 \
+        LOAD_HANDLER(r12,label)                                         \
+        ori     r10,r10,MSR_IR|MSR_DR|MSR_RI;                           \
+        mtspr   SPRN_SRR0,r12;                                          \
+        mfspr   r12,SPRN_SRR1;          /* and SRR1 */                  \
+        mtspr   SPRN_SRR1,r10;                                          \
+        rfid;                                                           \
+        b       .       /* prevent speculative execution */
+
+/*
+ * The common exception prolog is used for all except a few exceptions
+ * such as a segment miss on a kernel address.  We have to be prepared
+ * to take another exception from the point where we first touch the
+ * kernel stack onwards.
+ *
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ */
+#define EXCEPTION_PROLOG_COMMON(n, area)                                   \
+        andi.   r10,r12,MSR_PR;         /* See if coming from user      */ \
+        mr      r10,r1;                 /* Save r1                      */ \
+        subi    r1,r1,INT_FRAME_SIZE;   /* alloc frame on kernel stack  */ \
+        beq-    1f;                                                        \
+        ld      r1,PACAKSAVE(r13);      /* kernel stack to use          */ \
+1:      cmpdi   cr1,r1,0;               /* check if r1 is in userspace  */ \
+        bge-    cr1,2f;                 /* abort if it is               */ \
+        b       3f;                                                        \
+2:      li      r1,(n);                 /* will be reloaded later       */ \
+        sth     r1,PACA_TRAP_SAVE(r13);                                    \
+        b       bad_stack;                                                 \
+3:      std     r9,_CCR(r1);            /* save CR in stackframe        */ \
+        std     r11,_NIP(r1);           /* save SRR0 in stackframe      */ \
+        std     r12,_MSR(r1);           /* save SRR1 in stackframe      */ \
+        std     r10,0(r1);              /* make stack chain pointer     */ \
+        std     r0,GPR0(r1);            /* save r0 in stackframe        */ \
+        std     r10,GPR1(r1);           /* save r1 in stackframe        */ \
+        ACCOUNT_CPU_USER_ENTRY(r9, r10);                                   \
+        std     r2,GPR2(r1);            /* save r2 in stackframe        */ \
+        SAVE_4GPRS(3, r1);              /* save r3 - r6 in stackframe   */ \
+        SAVE_2GPRS(7, r1);              /* save r7, r8 in stackframe    */ \
+        ld      r9,area+EX_R9(r13);     /* move r9, r10 to stackframe   */ \
+        ld      r10,area+EX_R10(r13);                                      \
+        std     r9,GPR9(r1);                                               \
+        std     r10,GPR10(r1);                                             \
+        ld      r9,area+EX_R11(r13);    /* move r11 - r13 to stackframe */ \
+        ld      r10,area+EX_R12(r13);                                      \
+        ld      r11,area+EX_R13(r13);                                      \
+        std     r9,GPR11(r1);                                              \
+        std     r10,GPR12(r1);                                             \
+        std     r11,GPR13(r1);                                             \
+        ld      r2,PACATOC(r13);        /* get kernel TOC into r2       */ \
+        mflr    r9;                     /* save LR in stackframe        */ \
+        std     r9,_LINK(r1);                                              \
+        mfctr   r10;                    /* save CTR in stackframe       */ \
+        std     r10,_CTR(r1);                                              \
+        lbz     r10,PACASOFTIRQEN(r13);                            \
+        mfspr   r11,SPRN_XER;           /* save XER in stackframe       */ \
+        std     r10,SOFTE(r1);                                             \
+        std     r11,_XER(r1);                                              \
+        li      r9,(n)+1;                                                  \
+        std     r9,_TRAP(r1);           /* set trap number              */ \
+        li      r10,0;                                                     \
+        ld      r11,exception_marker@toc(r2);                              \
+        std     r10,RESULT(r1);         /* clear regs->result           */ \
+        std     r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame      */
+
+/*
+ * Exception vectors.
+ */
+#define STD_EXCEPTION_PSERIES(n, label)                 \
+        . = n;                                          \
+        .globl label##_pSeries;                         \
+label##_pSeries:                                        \
+        HMT_MEDIUM;                                     \
+        mtspr   SPRN_SPRG1,r13;         /* save r13 */  \
+        EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+#define HSTD_EXCEPTION_PSERIES(n, label)                \
+        . = n;                                          \
+        .globl label##_pSeries;                         \
+label##_pSeries:                                        \
+        HMT_MEDIUM;                                     \
+        mtspr   SPRN_SPRG1,r20;         /* save r20 */  \
+        mfspr   r20,SPRN_HSRR0;         /* copy HSRR0 to SRR0 */ \
+        mtspr   SPRN_SRR0,r20;                          \
+        mfspr   r20,SPRN_HSRR1;         /* copy HSRR0 to SRR0 */ \
+        mtspr   SPRN_SRR1,r20;                          \
+        mfspr   r20,SPRN_SPRG1;         /* restore r20 */ \
+        mtspr   SPRN_SPRG1,r13;         /* save r13 */  \
+        EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+
+#define MASKABLE_EXCEPTION_PSERIES(n, label)                            \
+        . = n;                                                          \
+        .globl label##_pSeries;                                         \
+label##_pSeries:                                                        \
+        HMT_MEDIUM;                                                     \
+        mtspr   SPRN_SPRG1,r13;         /* save r13 */                  \
+        mfspr   r13,SPRN_SPRG3;         /* get paca address into r13 */ \
+        std     r9,PACA_EXGEN+EX_R9(r13);       /* save r9, r10 */      \
+        std     r10,PACA_EXGEN+EX_R10(r13);                             \
+        lbz     r10,PACASOFTIRQEN(r13);                                 \
+        mfcr    r9;                                                     \
+        cmpwi   r10,0;                                                  \
+        beq     masked_interrupt;                                       \
+        mfspr   r10,SPRN_SPRG1;                                         \
+        std     r10,PACA_EXGEN+EX_R13(r13);                             \
+        std     r11,PACA_EXGEN+EX_R11(r13);                             \
+        std     r12,PACA_EXGEN+EX_R12(r13);                             \
+        clrrdi  r12,r13,32;             /* get high part of &label */   \
+        mfmsr   r10;                                                    \
+        mfspr   r11,SPRN_SRR0;          /* save SRR0 */                 \
+        LOAD_HANDLER(r12,label##_common)                                \
+        ori     r10,r10,MSR_IR|MSR_DR|MSR_RI;                           \
+        mtspr   SPRN_SRR0,r12;                                          \
+        mfspr   r12,SPRN_SRR1;          /* and SRR1 */                  \
+        mtspr   SPRN_SRR1,r10;                                          \
+        rfid;                                                           \
+        b       .       /* prevent speculative execution */
+
+#ifdef CONFIG_PPC_ISERIES
+#define DISABLE_INTS                            \
+        li      r11,0;                          \
+        stb     r11,PACASOFTIRQEN(r13);         \
+BEGIN_FW_FTR_SECTION;                           \
+        stb     r11,PACAHARDIRQEN(r13);         \
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);   \
+BEGIN_FW_FTR_SECTION;                           \
+        mfmsr   r10;                            \
+        ori     r10,r10,MSR_EE;                 \
+        mtmsrd  r10,1;                          \
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+
+#else
+#define DISABLE_INTS                            \
+        li      r11,0;                          \
+        stb     r11,PACASOFTIRQEN(r13);         \
+        stb     r11,PACAHARDIRQEN(r13)
+
+#endif /* CONFIG_PPC_ISERIES */
+
+#define ENABLE_INTS                             \
+        ld      r12,_MSR(r1);                   \
+        mfmsr   r11;                            \
+        rlwimi  r11,r12,0,MSR_EE;               \
+        mtmsrd  r11,1
+
+#define STD_EXCEPTION_COMMON(trap, label, hdlr)         \
+        .align  7;                                      \
+        .globl label##_common;                          \
+label##_common:                                         \
+        EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);      \
+        DISABLE_INTS;                                   \
+        bl      .save_nvgprs;                           \
+        addi    r3,r1,STACK_FRAME_OVERHEAD;             \
+        bl      hdlr;                                   \
+        b       .ret_from_except
+
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)    \
+        .align  7;                                      \
+        .globl label##_common;                          \
+label##_common:                                         \
+        EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);      \
+        FINISH_NAP;                                     \
+        DISABLE_INTS;                                   \
+        bl      .save_nvgprs;                           \
+        addi    r3,r1,STACK_FRAME_OVERHEAD;             \
+        bl      hdlr;                                   \
+        b       .ret_from_except
+
+#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)    \
+        .align  7;                                      \
+        .globl label##_common;                          \
+label##_common:                                         \
+        EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);      \
+        FINISH_NAP;                                     \
+        DISABLE_INTS;                                   \
+BEGIN_FTR_SECTION                                       \
+        bl      .ppc64_runlatch_on;                     \
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)                     \
+        addi    r3,r1,STACK_FRAME_OVERHEAD;             \
+        bl      hdlr;                                   \
+        b       .ret_from_except_lite
+
+/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP                              \
+BEGIN_FTR_SECTION                               \
+        clrrdi  r11,r1,THREAD_SHIFT;            \
+        ld      r9,TI_LOCAL_FLAGS(r11);         \
+        andi.   r10,r9,_TLF_NAPPING;            \
+        bnel    power4_fixup_nap;               \
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+#endif  /* _ASM_POWERPC_EXCEPTION_H */
diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h
index c624915b757e..9361cd5342cc 100644
--- a/include/asm-powerpc/fs_pd.h
+++ b/include/asm-powerpc/fs_pd.h
@@ -19,48 +19,22 @@
 
 #if defined(CONFIG_8260)
 #include <asm/mpc8260.h>
-#elif defined(CONFIG_85xx)
-#include <asm/mpc85xx.h>
 #endif
 
-#define cpm2_map(member)                                                \
-({                                                                      \
-        u32 offset = offsetof(cpm2_map_t, member);                      \
-        void *addr = ioremap (CPM_MAP_ADDR + offset,                    \
-                              sizeof( ((cpm2_map_t*)0)->member));       \
-        addr;                                                           \
-})
-
-#define cpm2_map_size(member, size)                                     \
-({                                                                      \
-        u32 offset = offsetof(cpm2_map_t, member);                      \
-        void *addr = ioremap (CPM_MAP_ADDR + offset, size);             \
-        addr;                                                           \
-})
-
-#define cpm2_unmap(addr)        iounmap(addr)
+#define cpm2_map(member) (&cpm2_immr->member)
+#define cpm2_map_size(member, size) (&cpm2_immr->member)
+#define cpm2_unmap(addr) do {} while(0)
 #endif
 
 #ifdef CONFIG_8xx
 #include <asm/8xx_immap.h>
 #include <asm/mpc8xx.h>
 
-#define immr_map(member)                                                \
-({                                                                      \
-        u32 offset = offsetof(immap_t, member);                         \
-        void *addr = ioremap (IMAP_ADDR + offset,                       \
-                              sizeof( ((immap_t*)0)->member));          \
-        addr;                                                           \
-})
-
-#define immr_map_size(member, size)                                     \
-({                                                                      \
-        u32 offset = offsetof(immap_t, member);                         \
-        void *addr = ioremap (IMAP_ADDR + offset, size);                \
-        addr;                                                           \
-})
+extern immap_t __iomem *mpc8xx_immr;
 
-#define immr_unmap(addr)                iounmap(addr)
+#define immr_map(member) (&mpc8xx_immr->member)
+#define immr_map_size(member, size) (&mpc8xx_immr->member)
+#define immr_unmap(addr) do {} while (0)
 #endif
 
 static inline int uart_baudrate(void)
diff --git a/include/asm-powerpc/highmem.h b/include/asm-powerpc/highmem.h
new file mode 100644
index 000000000000..f7b21ee302b4
--- /dev/null
+++ b/include/asm-powerpc/highmem.h
@@ -0,0 +1,135 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *                    Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+
+/* undef for production */
+#define HIGHMEM_DEBUG 1
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE      CONFIG_HIGHMEM_START
+#define LAST_PKMAP      (1 << PTE_SHIFT)
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define KMAP_FIX_BEGIN  (PKMAP_BASE + 0x00400000UL)
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+        might_sleep();
+        if (!PageHighMem(page))
+                return page_address(page);
+        return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+        BUG_ON(in_interrupt());
+        if (!PageHighMem(page))
+                return;
+        kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+        unsigned int idx;
+        unsigned long vaddr;
+
+        /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+        pagefault_disable();
+        if (!PageHighMem(page))
+                return page_address(page);
+
+        idx = type + KM_TYPE_NR*smp_processor_id();
+        vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE;
+#ifdef HIGHMEM_DEBUG
+        BUG_ON(!pte_none(*(kmap_pte+idx)));
+#endif
+        set_pte_at(&init_mm, vaddr, kmap_pte+idx, mk_pte(page, kmap_prot));
+        flush_tlb_page(NULL, vaddr);
+
+        return (void*) vaddr;
+}
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef HIGHMEM_DEBUG
+        unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+        unsigned int idx = type + KM_TYPE_NR*smp_processor_id();
+
+        if (vaddr < KMAP_FIX_BEGIN) { // FIXME
+                pagefault_enable();
+                return;
+        }
+
+        BUG_ON(vaddr != KMAP_FIX_BEGIN + idx * PAGE_SIZE);
+
+        /*
+         * force other mappings to Oops if they'll try to access
+         * this pte without first remap it
+         */
+        pte_clear(&init_mm, vaddr, kmap_pte+idx);
+        flush_tlb_page(NULL, vaddr);
+#endif
+        pagefault_enable();
+}
+
+static inline struct page *kmap_atomic_to_page(void *ptr)
+{
+        unsigned long idx, vaddr = (unsigned long) ptr;
+
+        if (vaddr < KMAP_FIX_BEGIN)
+                return virt_to_page(ptr);
+
+        idx = (vaddr - KMAP_FIX_BEGIN) >> PAGE_SHIFT;
+        return pte_page(kmap_pte[idx]);
+}
+
+#define flush_cache_kmaps()     flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-powerpc/hydra.h b/include/asm-powerpc/hydra.h
new file mode 100644
index 000000000000..1ad4eed07fbe
--- /dev/null
+++ b/include/asm-powerpc/hydra.h
@@ -0,0 +1,102 @@
+/*
+ *  include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is based on the following documentation:
+ *
+ *      Macintosh Technology in the Common Hardware Reference Platform
+ *      Apple Computer, Inc.
+ *
+ *      © Copyright 1995 Apple Computer, Inc. All rights reserved.
+ *
+ *  It's available online from http://chrp.apple.com/MacTech.pdf.
+ *  You can obtain paper copies of this book from computer bookstores or by
+ *  writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
+ *  Francisco, CA 94104. Reference ISBN 1-55860-393-X.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _ASMPPC_HYDRA_H
+#define _ASMPPC_HYDRA_H
+
+#ifdef __KERNEL__
+
+struct Hydra {
+    /* DBDMA Controller Register Space */
+    char Pad1[0x30];
+    u_int CachePD;
+    u_int IDs;
+    u_int Feature_Control;
+    char Pad2[0x7fc4];
+    /* DBDMA Channel Register Space */
+    char SCSI_DMA[0x100];
+    char Pad3[0x300];
+    char SCCA_Tx_DMA[0x100];
+    char SCCA_Rx_DMA[0x100];
+    char SCCB_Tx_DMA[0x100];
+    char SCCB_Rx_DMA[0x100];
+    char Pad4[0x7800];
+    /* Device Register Space */
+    char SCSI[0x1000];
+    char ADB[0x1000];
+    char SCC_Legacy[0x1000];
+    char SCC[0x1000];
+    char Pad9[0x2000];
+    char VIA[0x2000];
+    char Pad10[0x28000];
+    char OpenPIC[0x40000];
+};
+
+extern volatile struct Hydra __iomem *Hydra;
+
+
+    /*
+     *  Feature Control Register
+     */
+
+#define HYDRA_FC_SCC_CELL_EN    0x00000001      /* Enable SCC Clock */
+#define HYDRA_FC_SCSI_CELL_EN   0x00000002      /* Enable SCSI Clock */
+#define HYDRA_FC_SCCA_ENABLE    0x00000004      /* Enable SCC A Lines */
+#define HYDRA_FC_SCCB_ENABLE    0x00000008      /* Enable SCC B Lines */
+#define HYDRA_FC_ARB_BYPASS     0x00000010      /* Bypass Internal Arbiter */
+#define HYDRA_FC_RESET_SCC      0x00000020      /* Reset SCC */
+#define HYDRA_FC_MPIC_ENABLE    0x00000040      /* Enable OpenPIC */
+#define HYDRA_FC_SLOW_SCC_PCLK  0x00000080      /* 1=15.6672, 0=25 MHz */
+#define HYDRA_FC_MPIC_IS_MASTER 0x00000100      /* OpenPIC Master Mode */
+
+
+    /*
+     *  OpenPIC Interrupt Sources
+     */
+
+#define HYDRA_INT_SIO           0
+#define HYDRA_INT_SCSI_DMA      1
+#define HYDRA_INT_SCCA_TX_DMA   2
+#define HYDRA_INT_SCCA_RX_DMA   3
+#define HYDRA_INT_SCCB_TX_DMA   4
+#define HYDRA_INT_SCCB_RX_DMA   5
+#define HYDRA_INT_SCSI          6
+#define HYDRA_INT_SCCA          7
+#define HYDRA_INT_SCCB          8
+#define HYDRA_INT_VIA           9
+#define HYDRA_INT_ADB           10
+#define HYDRA_INT_ADB_NMI       11
+#define HYDRA_INT_EXT1          12      /* PCI IRQW */
+#define HYDRA_INT_EXT2          13      /* PCI IRQX */
+#define HYDRA_INT_EXT3          14      /* PCI IRQY */
+#define HYDRA_INT_EXT4          15      /* PCI IRQZ */
+#define HYDRA_INT_EXT5          16      /* IDE Primay/Secondary */
+#define HYDRA_INT_EXT6          17      /* IDE Secondary */
+#define HYDRA_INT_EXT7          18      /* Power Off Request */
+#define HYDRA_INT_SPARE         19
+
+extern int hydra_init(void);
+extern void macio_adb_init(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASMPPC_HYDRA_H */
diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h
index 0f66f0f82c32..1644e44c8757 100644
--- a/include/asm-powerpc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -67,7 +67,7 @@ static __inline__ unsigned long ide_default_io_base(int index)
 #define ide_init_default_irq(base)      ide_default_irq(base)
 #endif
 
-#if (defined CONFIG_APUS || defined CONFIG_BLK_DEV_MPC8xx_IDE )
+#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
 #define IDE_ARCH_ACK_INTR  1
 #define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1)
 #endif
diff --git a/include/asm-powerpc/immap_86xx.h b/include/asm-powerpc/immap_86xx.h
index 59b9e07b8e99..0ad4e653d464 100644
--- a/include/asm-powerpc/immap_86xx.h
+++ b/include/asm-powerpc/immap_86xx.h
@@ -1,124 +1,135 @@
-/*
+/**
  * MPC86xx Internal Memory Map
  *
- * Author: Jeff Brown
+ * Authors: Jeff Brown
+ *          Timur Tabi <timur@freescale.com>
  *
- * Copyright 2004 Freescale Semiconductor, Inc
+ * Copyright 2004,2007 Freescale Semiconductor, Inc
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
+ * This header file defines structures for various 86xx SOC devices that are
+ * used by multiple source files.
  */
 
 #ifndef __ASM_POWERPC_IMMAP_86XX_H__
 #define __ASM_POWERPC_IMMAP_86XX_H__
 #ifdef __KERNEL__
 
-/* Eventually this should define all the IO block registers in 86xx */
+/* Global Utility Registers */
+struct ccsr_guts {
+        __be32  porpllsr;       /* 0x.0000 - POR PLL Ratio Status Register */
+        __be32  porbmsr;        /* 0x.0004 - POR Boot Mode Status Register */
+        __be32  porimpscr;      /* 0x.0008 - POR I/O Impedance Status and Control Register */
+        __be32  pordevsr;       /* 0x.000c - POR I/O Device Status Register */
+        __be32  pordbgmsr;      /* 0x.0010 - POR Debug Mode Status Register */
+        u8      res1[0x20 - 0x14];
+        __be32  porcir;         /* 0x.0020 - POR Configuration Information Register */
+        u8      res2[0x30 - 0x24];
+        __be32  gpiocr;         /* 0x.0030 - GPIO Control Register */
+        u8      res3[0x40 - 0x34];
+        __be32  gpoutdr;        /* 0x.0040 - General-Purpose Output Data Register */
+        u8      res4[0x50 - 0x44];
+        __be32  gpindr;         /* 0x.0050 - General-Purpose Input Data Register */
+        u8      res5[0x60 - 0x54];
+        __be32  pmuxcr;         /* 0x.0060 - Alternate Function Signal Multiplex Control */
+        u8      res6[0x70 - 0x64];
+        __be32  devdisr;        /* 0x.0070 - Device Disable Control */
+        __be32  devdisr2;       /* 0x.0074 - Device Disable Control 2 */
+        u8      res7[0x80 - 0x78];
+        __be32  powmgtcsr;      /* 0x.0080 - Power Management Status and Control Register */
+        u8      res8[0x90 - 0x84];
+        __be32  mcpsumr;        /* 0x.0090 - Machine Check Summary Register */
+        __be32  rstrscr;        /* 0x.0094 - Reset Request Status and Control Register */
+        u8      res9[0xA0 - 0x98];
+        __be32  pvr;            /* 0x.00a0 - Processor Version Register */
+        __be32  svr;            /* 0x.00a4 - System Version Register */
+        u8      res10[0xB0 - 0xA8];
+        __be32  rstcr;          /* 0x.00b0 - Reset Control Register */
+        u8      res11[0xC0 - 0xB4];
+        __be32  elbcvselcr;     /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
+        u8      res12[0x800 - 0xC4];
+        __be32  clkdvdr;        /* 0x.0800 - Clock Divide Register */
+        u8      res13[0x900 - 0x804];
+        __be32  ircr;           /* 0x.0900 - Infrared Control Register */
+        u8      res14[0x908 - 0x904];
+        __be32  dmacr;          /* 0x.0908 - DMA Control Register */
+        u8      res15[0x914 - 0x90C];
+        __be32  elbccr;         /* 0x.0914 - eLBC Control Register */
+        u8      res16[0xB20 - 0x918];
+        __be32  ddr1clkdr;      /* 0x.0b20 - DDR1 Clock Disable Register */
+        __be32  ddr2clkdr;      /* 0x.0b24 - DDR2 Clock Disable Register */
+        __be32  ddrclkdr;       /* 0x.0b28 - DDR Clock Disable Register */
+        u8      res17[0xE00 - 0xB2C];
+        __be32  clkocr;         /* 0x.0e00 - Clock Out Select Register */
+        u8      res18[0xE10 - 0xE04];
+        __be32  ddrdllcr;       /* 0x.0e10 - DDR DLL Control Register */
+        u8      res19[0xE20 - 0xE14];
+        __be32  lbcdllcr;       /* 0x.0e20 - LBC DLL Control Register */
+        u8      res20[0xF04 - 0xE24];
+        __be32  srds1cr0;       /* 0x.0f04 - SerDes1 Control Register 0 */
+        __be32  srds1cr1;       /* 0x.0f08 - SerDes1 Control Register 0 */
+        u8      res21[0xF40 - 0xF0C];
+        __be32  srds2cr0;       /* 0x.0f40 - SerDes1 Control Register 0 */
+        __be32  srds2cr1;       /* 0x.0f44 - SerDes1 Control Register 0 */
+} __attribute__ ((packed));
 
-/* PCI Registers */
-typedef struct ccsr_pci {
-        uint    cfg_addr;       /* 0x.000 - PCI Configuration Address Register */
-        uint    cfg_data;       /* 0x.004 - PCI Configuration Data Register */
-        uint    int_ack;        /* 0x.008 - PCI Interrupt Acknowledge Register */
-        char    res1[3060];
-        uint    potar0;         /* 0x.c00 - PCI Outbound Transaction Address Register 0 */
-        uint    potear0;        /* 0x.c04 - PCI Outbound Translation Extended Address Register 0 */
-        uint    powbar0;        /* 0x.c08 - PCI Outbound Window Base Address Register 0 */
-        char    res2[4];
-        uint    powar0;         /* 0x.c10 - PCI Outbound Window Attributes Register 0 */
-        char    res3[12];
-        uint    potar1;         /* 0x.c20 - PCI Outbound Transaction Address Register 1 */
-        uint    potear1;        /* 0x.c24 - PCI Outbound Translation Extended Address Register 1 */
-        uint    powbar1;        /* 0x.c28 - PCI Outbound Window Base Address Register 1 */
-        char    res4[4];
-        uint    powar1;         /* 0x.c30 - PCI Outbound Window Attributes Register 1 */
-        char    res5[12];
-        uint    potar2;         /* 0x.c40 - PCI Outbound Transaction Address Register 2 */
-        uint    potear2;        /* 0x.c44 - PCI Outbound Translation Extended Address Register 2 */
-        uint    powbar2;        /* 0x.c48 - PCI Outbound Window Base Address Register 2 */
-        char    res6[4];
-        uint    powar2;         /* 0x.c50 - PCI Outbound Window Attributes Register 2 */
-        char    res7[12];
-        uint    potar3;         /* 0x.c60 - PCI Outbound Transaction Address Register 3 */
-        uint    potear3;        /* 0x.c64 - PCI Outbound Translation Extended Address Register 3 */
-        uint    powbar3;        /* 0x.c68 - PCI Outbound Window Base Address Register 3 */
-        char    res8[4];
-        uint    powar3;         /* 0x.c70 - PCI Outbound Window Attributes Register 3 */
-        char    res9[12];
-        uint    potar4;         /* 0x.c80 - PCI Outbound Transaction Address Register 4 */
-        uint    potear4;        /* 0x.c84 - PCI Outbound Translation Extended Address Register 4 */
-        uint    powbar4;        /* 0x.c88 - PCI Outbound Window Base Address Register 4 */
-        char    res10[4];
-        uint    powar4;         /* 0x.c90 - PCI Outbound Window Attributes Register 4 */
-        char    res11[268];
-        uint    pitar3;         /* 0x.da0 - PCI Inbound Translation Address Register 3  */
-        char    res12[4];
-        uint    piwbar3;        /* 0x.da8 - PCI Inbound Window Base Address Register 3 */
-        uint    piwbear3;       /* 0x.dac - PCI Inbound Window Base Extended Address Register 3 */
-        uint    piwar3;         /* 0x.db0 - PCI Inbound Window Attributes Register 3 */
-        char    res13[12];
-        uint    pitar2;         /* 0x.dc0 - PCI Inbound Translation Address Register 2  */
-        char    res14[4];
-        uint    piwbar2;        /* 0x.dc8 - PCI Inbound Window Base Address Register 2 */
-        uint    piwbear2;       /* 0x.dcc - PCI Inbound Window Base Extended Address Register 2 */
-        uint    piwar2;         /* 0x.dd0 - PCI Inbound Window Attributes Register 2 */
-        char    res15[12];
-        uint    pitar1;         /* 0x.de0 - PCI Inbound Translation Address Register 1  */
-        char    res16[4];
-        uint    piwbar1;        /* 0x.de8 - PCI Inbound Window Base Address Register 1 */
-        char    res17[4];
-        uint    piwar1;         /* 0x.df0 - PCI Inbound Window Attributes Register 1 */
-        char    res18[12];
-        uint    err_dr;         /* 0x.e00 - PCI Error Detect Register */
-        uint    err_cap_dr;     /* 0x.e04 - PCI Error Capture Disable Register */
-        uint    err_en;         /* 0x.e08 - PCI Error Enable Register */
-        uint    err_attrib;     /* 0x.e0c - PCI Error Attributes Capture Register */
-        uint    err_addr;       /* 0x.e10 - PCI Error Address Capture Register */
-        uint    err_ext_addr;   /* 0x.e14 - PCI Error Extended Address Capture Register */
-        uint    err_dl;         /* 0x.e18 - PCI Error Data Low Capture Register */
-        uint    err_dh;         /* 0x.e1c - PCI Error Data High Capture Register */
-        uint    gas_timr;       /* 0x.e20 - PCI Gasket Timer Register */
-        uint    pci_timr;       /* 0x.e24 - PCI Timer Register */
-        char    res19[472];
-} ccsr_pci_t;
+#define CCSR_GUTS_DMACR_DEV_SSI 0       /* DMA controller/channel set to SSI */
+#define CCSR_GUTS_DMACR_DEV_IR  1       /* DMA controller/channel set to IR */
 
-/* Global Utility Registers */
-typedef struct ccsr_guts {
-        uint    porpllsr;       /* 0x.0000 - POR PLL Ratio Status Register */
-        uint    porbmsr;        /* 0x.0004 - POR Boot Mode Status Register */
-        uint    porimpscr;      /* 0x.0008 - POR I/O Impedance Status and Control Register */
-        uint    pordevsr;       /* 0x.000c - POR I/O Device Status Register */
-        uint    pordbgmsr;      /* 0x.0010 - POR Debug Mode Status Register */
-        char    res1[12];
-        uint    gpporcr;        /* 0x.0020 - General-Purpose POR Configuration Register */
-        char    res2[12];
-        uint    gpiocr;         /* 0x.0030 - GPIO Control Register */
-        char    res3[12];
-        uint    gpoutdr;        /* 0x.0040 - General-Purpose Output Data Register */
-        char    res4[12];
-        uint    gpindr;         /* 0x.0050 - General-Purpose Input Data Register */
-        char    res5[12];
-        uint    pmuxcr;         /* 0x.0060 - Alternate Function Signal Multiplex Control */
-        char    res6[12];
-        uint    devdisr;        /* 0x.0070 - Device Disable Control */
-        char    res7[12];
-        uint    powmgtcsr;      /* 0x.0080 - Power Management Status and Control Register */
-        char    res8[12];
-        uint    mcpsumr;        /* 0x.0090 - Machine Check Summary Register */
-        char    res9[12];
-        uint    pvr;            /* 0x.00a0 - Processor Version Register */
-        uint    svr;            /* 0x.00a4 - System Version Register */
-        char    res10[3416];
-        uint    clkocr;         /* 0x.0e00 - Clock Out Select Register */
-        char    res11[12];
-        uint    ddrdllcr;       /* 0x.0e10 - DDR DLL Control Register */
-        char    res12[12];
-        uint    lbcdllcr;       /* 0x.0e20 - LBC DLL Control Register */
-        char    res13[61916];
-} ccsr_guts_t;
+/*
+ * Set the DMACR register in the GUTS
+ *
+ * The DMACR register determines the source of initiated transfers for each
+ * channel on each DMA controller.  Rather than have a bunch of repetitive
+ * macros for the bit patterns, we just have a function that calculates
+ * them.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (1 or 2)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
+ */
+static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
+        unsigned int co, unsigned int ch, unsigned int device)
+{
+        unsigned int shift = 16 + (8 * (2 - co) + 2 * (3 - ch));
+
+        clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
+}
+
+#define CCSR_GUTS_PMUXCR_LDPSEL         0x00010000
+#define CCSR_GUTS_PMUXCR_SSI1_MASK      0x0000C000      /* Bitmask for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI1_LA        0x00000000      /* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI1_HI        0x00004000      /* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI1_SSI       0x00008000      /* Used for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI2_MASK      0x00003000      /* Bitmask for SSI2 */
+#define CCSR_GUTS_PMUXCR_SSI2_LA        0x00000000      /* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI2_HI        0x00001000      /* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI2_SSI       0x00002000      /* Used for SSI2 */
+#define CCSR_GUTS_PMUXCR_LA_22_25_LA    0x00000000      /* Latched Address */
+#define CCSR_GUTS_PMUXCR_LA_22_25_HI    0x00000400      /* High impedance */
+#define CCSR_GUTS_PMUXCR_DBGDRV         0x00000200      /* Signals not driven */
+#define CCSR_GUTS_PMUXCR_DMA2_0         0x00000008
+#define CCSR_GUTS_PMUXCR_DMA2_3         0x00000004
+#define CCSR_GUTS_PMUXCR_DMA1_0         0x00000002
+#define CCSR_GUTS_PMUXCR_DMA1_3         0x00000001
+
+#define CCSR_GUTS_CLKDVDR_PXCKEN        0x80000000
+#define CCSR_GUTS_CLKDVDR_SSICKEN       0x20000000
+#define CCSR_GUTS_CLKDVDR_PXCKINV       0x10000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK  0x06000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
+        (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
+#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT   16
+#define CCSR_GUTS_CLKDVDR_PXCLK_MASK    0x001F0000
+#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
+#define CCSR_GUTS_CLKDVDR_SSICLK_MASK   0x000000FF
+#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
 
 #endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
 #endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/immap_cpm2.h b/include/asm-powerpc/immap_cpm2.h
new file mode 100644
index 000000000000..4080bab0468c
--- /dev/null
+++ b/include/asm-powerpc/immap_cpm2.h
@@ -0,0 +1,650 @@
+/*
+ * CPM2 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * The Internal Memory Map for devices with CPM2 on them.  This
+ * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
+ * 8560).
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_CPM2__
+#define __IMMAP_CPM2__
+
+#include <linux/types.h>
+
+/* System configuration registers.
+*/
+typedef struct sys_82xx_conf {
+        u32     sc_siumcr;
+        u32     sc_sypcr;
+        u8      res1[6];
+        u16     sc_swsr;
+        u8      res2[20];
+        u32     sc_bcr;
+        u8      sc_ppc_acr;
+        u8      res3[3];
+        u32     sc_ppc_alrh;
+        u32     sc_ppc_alrl;
+        u8      sc_lcl_acr;
+        u8      res4[3];
+        u32     sc_lcl_alrh;
+        u32     sc_lcl_alrl;
+        u32     sc_tescr1;
+        u32     sc_tescr2;
+        u32     sc_ltescr1;
+        u32     sc_ltescr2;
+        u32     sc_pdtea;
+        u8      sc_pdtem;
+        u8      res5[3];
+        u32     sc_ldtea;
+        u8      sc_ldtem;
+        u8      res6[163];
+} sysconf_82xx_cpm2_t;
+
+typedef struct sys_85xx_conf {
+        u32     sc_cear;
+        u16     sc_ceer;
+        u16     sc_cemr;
+        u8      res1[70];
+        u32     sc_smaer;
+        u8      res2[4];
+        u32     sc_smevr;
+        u32     sc_smctr;
+        u32     sc_lmaer;
+        u8      res3[4];
+        u32     sc_lmevr;
+        u32     sc_lmctr;
+        u8      res4[144];
+} sysconf_85xx_cpm2_t;
+
+typedef union sys_conf {
+        sysconf_82xx_cpm2_t     siu_82xx;
+        sysconf_85xx_cpm2_t     siu_85xx;
+} sysconf_cpm2_t;
+
+
+
+/* Memory controller registers.
+*/
+typedef struct  mem_ctlr {
+        u32     memc_br0;
+        u32     memc_or0;
+        u32     memc_br1;
+        u32     memc_or1;
+        u32     memc_br2;
+        u32     memc_or2;
+        u32     memc_br3;
+        u32     memc_or3;
+        u32     memc_br4;
+        u32     memc_or4;
+        u32     memc_br5;
+        u32     memc_or5;
+        u32     memc_br6;
+        u32     memc_or6;
+        u32     memc_br7;
+        u32     memc_or7;
+        u32     memc_br8;
+        u32     memc_or8;
+        u32     memc_br9;
+        u32     memc_or9;
+        u32     memc_br10;
+        u32     memc_or10;
+        u32     memc_br11;
+        u32     memc_or11;
+        u8      res1[8];
+        u32     memc_mar;
+        u8      res2[4];
+        u32     memc_mamr;
+        u32     memc_mbmr;
+        u32     memc_mcmr;
+        u8      res3[8];
+        u16     memc_mptpr;
+        u8      res4[2];
+        u32     memc_mdr;
+        u8      res5[4];
+        u32     memc_psdmr;
+        u32     memc_lsdmr;
+        u8      memc_purt;
+        u8      res6[3];
+        u8      memc_psrt;
+        u8      res7[3];
+        u8      memc_lurt;
+        u8      res8[3];
+        u8      memc_lsrt;
+        u8      res9[3];
+        u32     memc_immr;
+        u32     memc_pcibr0;
+        u32     memc_pcibr1;
+        u8      res10[16];
+        u32     memc_pcimsk0;
+        u32     memc_pcimsk1;
+        u8      res11[52];
+} memctl_cpm2_t;
+
+/* System Integration Timers.
+*/
+typedef struct  sys_int_timers {
+        u8      res1[32];
+        u16     sit_tmcntsc;
+        u8      res2[2];
+        u32     sit_tmcnt;
+        u8      res3[4];
+        u32     sit_tmcntal;
+        u8      res4[16];
+        u16     sit_piscr;
+        u8      res5[2];
+        u32     sit_pitc;
+        u32     sit_pitr;
+        u8      res6[94];
+        u8      res7[390];
+} sit_cpm2_t;
+
+#define PISCR_PIRQ_MASK         ((u16)0xff00)
+#define PISCR_PS                ((u16)0x0080)
+#define PISCR_PIE               ((u16)0x0004)
+#define PISCR_PTF               ((u16)0x0002)
+#define PISCR_PTE               ((u16)0x0001)
+
+/* PCI Controller.
+*/
+typedef struct pci_ctlr {
+        u32     pci_omisr;
+        u32     pci_omimr;
+        u8      res1[8];
+        u32     pci_ifqpr;
+        u32     pci_ofqpr;
+        u8      res2[8];
+        u32     pci_imr0;
+        u32     pci_imr1;
+        u32     pci_omr0;
+        u32     pci_omr1;
+        u32     pci_odr;
+        u8      res3[4];
+        u32     pci_idr;
+        u8      res4[20];
+        u32     pci_imisr;
+        u32     pci_imimr;
+        u8      res5[24];
+        u32     pci_ifhpr;
+        u8      res6[4];
+        u32     pci_iftpr;
+        u8      res7[4];
+        u32     pci_iphpr;
+        u8      res8[4];
+        u32     pci_iptpr;
+        u8      res9[4];
+        u32     pci_ofhpr;
+        u8      res10[4];
+        u32     pci_oftpr;
+        u8      res11[4];
+        u32     pci_ophpr;
+        u8      res12[4];
+        u32     pci_optpr;
+        u8      res13[8];
+        u32     pci_mucr;
+        u8      res14[8];
+        u32     pci_qbar;
+        u8      res15[12];
+        u32     pci_dmamr0;
+        u32     pci_dmasr0;
+        u32     pci_dmacdar0;
+        u8      res16[4];
+        u32     pci_dmasar0;
+        u8      res17[4];
+        u32     pci_dmadar0;
+        u8      res18[4];
+        u32     pci_dmabcr0;
+        u32     pci_dmandar0;
+        u8      res19[86];
+        u32     pci_dmamr1;
+        u32     pci_dmasr1;
+        u32     pci_dmacdar1;
+        u8      res20[4];
+        u32     pci_dmasar1;
+        u8      res21[4];
+        u32     pci_dmadar1;
+        u8      res22[4];
+        u32     pci_dmabcr1;
+        u32     pci_dmandar1;
+        u8      res23[88];
+        u32     pci_dmamr2;
+        u32     pci_dmasr2;
+        u32     pci_dmacdar2;
+        u8      res24[4];
+        u32     pci_dmasar2;
+        u8      res25[4];
+        u32     pci_dmadar2;
+        u8      res26[4];
+        u32     pci_dmabcr2;
+        u32     pci_dmandar2;
+        u8      res27[88];
+        u32     pci_dmamr3;
+        u32     pci_dmasr3;
+        u32     pci_dmacdar3;
+        u8      res28[4];
+        u32     pci_dmasar3;
+        u8      res29[4];
+        u32     pci_dmadar3;
+        u8      res30[4];
+        u32     pci_dmabcr3;
+        u32     pci_dmandar3;
+        u8      res31[344];
+        u32     pci_potar0;
+        u8      res32[4];
+        u32     pci_pobar0;
+        u8      res33[4];
+        u32     pci_pocmr0;
+        u8      res34[4];
+        u32     pci_potar1;
+        u8      res35[4];
+        u32     pci_pobar1;
+        u8      res36[4];
+        u32     pci_pocmr1;
+        u8      res37[4];
+        u32     pci_potar2;
+        u8      res38[4];
+        u32     pci_pobar2;
+        u8      res39[4];
+        u32     pci_pocmr2;
+        u8      res40[50];
+        u32     pci_ptcr;
+        u32     pci_gpcr;
+        u32     pci_gcr;
+        u32     pci_esr;
+        u32     pci_emr;
+        u32     pci_ecr;
+        u32     pci_eacr;
+        u8      res41[4];
+        u32     pci_edcr;
+        u8      res42[4];
+        u32     pci_eccr;
+        u8      res43[44];
+        u32     pci_pitar1;
+        u8      res44[4];
+        u32     pci_pibar1;
+        u8      res45[4];
+        u32     pci_picmr1;
+        u8      res46[4];
+        u32     pci_pitar0;
+        u8      res47[4];
+        u32     pci_pibar0;
+        u8      res48[4];
+        u32     pci_picmr0;
+        u8      res49[4];
+        u32     pci_cfg_addr;
+        u32     pci_cfg_data;
+        u32     pci_int_ack;
+        u8      res50[756];
+} pci_cpm2_t;
+
+/* Interrupt Controller.
+*/
+typedef struct interrupt_controller {
+        u16     ic_sicr;
+        u8      res1[2];
+        u32     ic_sivec;
+        u32     ic_sipnrh;
+        u32     ic_sipnrl;
+        u32     ic_siprr;
+        u32     ic_scprrh;
+        u32     ic_scprrl;
+        u32     ic_simrh;
+        u32     ic_simrl;
+        u32     ic_siexr;
+        u8      res2[88];
+} intctl_cpm2_t;
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+        u32     car_sccr;
+        u8      res1[4];
+        u32     car_scmr;
+        u8      res2[4];
+        u32     car_rsr;
+        u32     car_rmr;
+        u8      res[104];
+} car_cpm2_t;
+
+/* Input/Output Port control/status registers.
+ * Names consistent with processor manual, although they are different
+ * from the original 8xx names.......
+ */
+typedef struct io_port {
+        u32     iop_pdira;
+        u32     iop_ppara;
+        u32     iop_psora;
+        u32     iop_podra;
+        u32     iop_pdata;
+        u8      res1[12];
+        u32     iop_pdirb;
+        u32     iop_pparb;
+        u32     iop_psorb;
+        u32     iop_podrb;
+        u32     iop_pdatb;
+        u8      res2[12];
+        u32     iop_pdirc;
+        u32     iop_pparc;
+        u32     iop_psorc;
+        u32     iop_podrc;
+        u32     iop_pdatc;
+        u8      res3[12];
+        u32     iop_pdird;
+        u32     iop_ppard;
+        u32     iop_psord;
+        u32     iop_podrd;
+        u32     iop_pdatd;
+        u8      res4[12];
+} iop_cpm2_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+        u8      cpmt_tgcr1;
+        u8      res1[3];
+        u8      cpmt_tgcr2;
+        u8      res2[11];
+        u16     cpmt_tmr1;
+        u16     cpmt_tmr2;
+        u16     cpmt_trr1;
+        u16     cpmt_trr2;
+        u16     cpmt_tcr1;
+        u16     cpmt_tcr2;
+        u16     cpmt_tcn1;
+        u16     cpmt_tcn2;
+        u16     cpmt_tmr3;
+        u16     cpmt_tmr4;
+        u16     cpmt_trr3;
+        u16     cpmt_trr4;
+        u16     cpmt_tcr3;
+        u16     cpmt_tcr4;
+        u16     cpmt_tcn3;
+        u16     cpmt_tcn4;
+        u16     cpmt_ter1;
+        u16     cpmt_ter2;
+        u16     cpmt_ter3;
+        u16     cpmt_ter4;
+        u8      res3[584];
+} cpmtimer_cpm2_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+        u8      res0[24];
+        u8      sdma_sdsr;
+        u8      res1[3];
+        u8      sdma_sdmr;
+        u8      res2[3];
+        u8      sdma_idsr1;
+        u8      res3[3];
+        u8      sdma_idmr1;
+        u8      res4[3];
+        u8      sdma_idsr2;
+        u8      res5[3];
+        u8      sdma_idmr2;
+        u8      res6[3];
+        u8      sdma_idsr3;
+        u8      res7[3];
+        u8      sdma_idmr3;
+        u8      res8[3];
+        u8      sdma_idsr4;
+        u8      res9[3];
+        u8      sdma_idmr4;
+        u8      res10[707];
+} sdma_cpm2_t;
+
+/* Fast controllers
+*/
+typedef struct fcc {
+        u32     fcc_gfmr;
+        u32     fcc_fpsmr;
+        u16     fcc_ftodr;
+        u8      res1[2];
+        u16     fcc_fdsr;
+        u8      res2[2];
+        u16     fcc_fcce;
+        u8      res3[2];
+        u16     fcc_fccm;
+        u8      res4[2];
+        u8      fcc_fccs;
+        u8      res5[3];
+        u8      fcc_ftirr_phy[4];
+} fcc_t;
+
+/* Fast controllers continued
+ */
+typedef struct fcc_c {
+        u32     fcc_firper;
+        u32     fcc_firer;
+        u32     fcc_firsr_hi;
+        u32     fcc_firsr_lo;
+        u8      fcc_gfemr;
+        u8      res1[15];
+} fcc_c_t;
+
+/* TC Layer
+ */
+typedef struct tclayer {
+        u16     tc_tcmode;
+        u16     tc_cdsmr;
+        u16     tc_tcer;
+        u16     tc_rcc;
+        u16     tc_tcmr;
+        u16     tc_fcc;
+        u16     tc_ccc;
+        u16     tc_icc;
+        u16     tc_tcc;
+        u16     tc_ecc;
+        u8      res1[12];
+} tclayer_t;
+
+
+/* I2C
+*/
+typedef struct i2c {
+        u8      i2c_i2mod;
+        u8      res1[3];
+        u8      i2c_i2add;
+        u8      res2[3];
+        u8      i2c_i2brg;
+        u8      res3[3];
+        u8      i2c_i2com;
+        u8      res4[3];
+        u8      i2c_i2cer;
+        u8      res5[3];
+        u8      i2c_i2cmr;
+        u8      res6[331];
+} i2c_cpm2_t;
+
+typedef struct scc {            /* Serial communication channels */
+        u32     scc_gsmrl;
+        u32     scc_gsmrh;
+        u16     scc_psmr;
+        u8      res1[2];
+        u16     scc_todr;
+        u16     scc_dsr;
+        u16     scc_scce;
+        u8      res2[2];
+        u16     scc_sccm;
+        u8      res3;
+        u8      scc_sccs;
+        u8      res4[8];
+} scc_t;
+
+typedef struct smc {            /* Serial management channels */
+        u8      res1[2];
+        u16     smc_smcmr;
+        u8      res2[2];
+        u8      smc_smce;
+        u8      res3[3];
+        u8      smc_smcm;
+        u8      res4[5];
+} smc_t;
+
+/* Serial Peripheral Interface.
+*/
+typedef struct spi_ctrl {
+        u16     spi_spmode;
+        u8      res1[4];
+        u8      spi_spie;
+        u8      res2[3];
+        u8      spi_spim;
+        u8      res3[2];
+        u8      spi_spcom;
+        u8      res4[82];
+} spictl_cpm2_t;
+
+/* CPM Mux.
+*/
+typedef struct cpmux {
+        u8      cmx_si1cr;
+        u8      res1;
+        u8      cmx_si2cr;
+        u8      res2;
+        u32     cmx_fcr;
+        u32     cmx_scr;
+        u8      cmx_smr;
+        u8      res3;
+        u16     cmx_uar;
+        u8      res4[16];
+} cpmux_t;
+
+/* SIRAM control
+*/
+typedef struct siram {
+        u16     si_amr;
+        u16     si_bmr;
+        u16     si_cmr;
+        u16     si_dmr;
+        u8      si_gmr;
+        u8      res1;
+        u8      si_cmdr;
+        u8      res2;
+        u8      si_str;
+        u8      res3;
+        u16     si_rsr;
+} siramctl_t;
+
+typedef struct mcc {
+        u16     mcc_mcce;
+        u8      res1[2];
+        u16     mcc_mccm;
+        u8      res2[2];
+        u8      mcc_mccf;
+        u8      res3[7];
+} mcc_t;
+
+typedef struct comm_proc {
+        u32     cp_cpcr;
+        u32     cp_rccr;
+        u8      res1[14];
+        u16     cp_rter;
+        u8      res2[2];
+        u16     cp_rtmr;
+        u16     cp_rtscr;
+        u8      res3[2];
+        u32     cp_rtsr;
+        u8      res4[12];
+} cpm_cpm2_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+        u8      usb_usmod;
+        u8      usb_usadr;
+        u8      usb_uscom;
+        u8      res1[1];
+        u16     usb_usep1;
+        u16     usb_usep2;
+        u16     usb_usep3;
+        u16     usb_usep4;
+        u8      res2[4];
+        u16     usb_usber;
+        u8      res3[2];
+        u16     usb_usbmr;
+        u8      usb_usbs;
+        u8      res4[7];
+} usb_cpm2_t;
+
+/* ...and the whole thing wrapped up....
+*/
+
+typedef struct immap {
+        /* Some references are into the unique and known dpram spaces,
+         * others are from the generic base.
+         */
+#define im_dprambase    im_dpram1
+        u8              im_dpram1[16*1024];
+        u8              res1[16*1024];
+        u8              im_dpram2[4*1024];
+        u8              res2[8*1024];
+        u8              im_dpram3[4*1024];
+        u8              res3[16*1024];
+
+        sysconf_cpm2_t  im_siu_conf;    /* SIU Configuration */
+        memctl_cpm2_t   im_memctl;      /* Memory Controller */
+        sit_cpm2_t      im_sit;         /* System Integration Timers */
+        pci_cpm2_t      im_pci;         /* PCI Controller */
+        intctl_cpm2_t   im_intctl;      /* Interrupt Controller */
+        car_cpm2_t      im_clkrst;      /* Clocks and reset */
+        iop_cpm2_t      im_ioport;      /* IO Port control/status */
+        cpmtimer_cpm2_t im_cpmtimer;    /* CPM timers */
+        sdma_cpm2_t     im_sdma;        /* SDMA control/status */
+
+        fcc_t           im_fcc[3];      /* Three FCCs */
+        u8              res4z[32];
+        fcc_c_t         im_fcc_c[3];    /* Continued FCCs */
+
+        u8              res4[32];
+
+        tclayer_t       im_tclayer[8];  /* Eight TCLayers */
+        u16             tc_tcgsr;
+        u16             tc_tcger;
+
+        /* First set of baud rate generators.
+        */
+        u8              res[236];
+        u32             im_brgc5;
+        u32             im_brgc6;
+        u32             im_brgc7;
+        u32             im_brgc8;
+
+        u8              res5[608];
+
+        i2c_cpm2_t      im_i2c;         /* I2C control/status */
+        cpm_cpm2_t      im_cpm;         /* Communication processor */
+
+        /* Second set of baud rate generators.
+        */
+        u32             im_brgc1;
+        u32             im_brgc2;
+        u32             im_brgc3;
+        u32             im_brgc4;
+
+        scc_t           im_scc[4];      /* Four SCCs */
+        smc_t           im_smc[2];      /* Couple of SMCs */
+        spictl_cpm2_t   im_spi;         /* A SPI */
+        cpmux_t         im_cpmux;       /* CPM clock route mux */
+        siramctl_t      im_siramctl1;   /* First SI RAM Control */
+        mcc_t           im_mcc1;        /* First MCC */
+        siramctl_t      im_siramctl2;   /* Second SI RAM Control */
+        mcc_t           im_mcc2;        /* Second MCC */
+        usb_cpm2_t      im_usb;         /* USB Controller */
+
+        u8              res6[1153];
+
+        u16             im_si1txram[256];
+        u8              res7[512];
+        u16             im_si1rxram[256];
+        u8              res8[512];
+        u16             im_si2txram[256];
+        u8              res9[512];
+        u16             im_si2rxram[256];
+        u8              res10[512];
+        u8              res11[4096];
+} cpm2_map_t;
+
+extern cpm2_map_t __iomem *cpm2_immr;
+
+#endif /* __IMMAP_CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
index 1020b7fc0129..aba9806b31c9 100644
--- a/include/asm-powerpc/immap_qe.h
+++ b/include/asm-powerpc/immap_qe.h
@@ -86,8 +86,9 @@ struct cp_qe {
         __be16  ceexe4;         /* QE external request 4 event register */
         u8      res11[0x2];
         __be16  ceexm4;         /* QE external request 4 mask register */
-        u8      res12[0x2];
-        u8      res13[0x280];
+        u8      res12[0x3A];
+        __be32  ceurnr;         /* QE microcode revision number register */
+        u8      res13[0x244];
 } __attribute__ ((packed));
 
 /* QE Multiplexer */
@@ -96,10 +97,7 @@ struct qe_mux {
         __be32  cmxsi1cr_l;     /* CMX SI1 clock route low register */
         __be32  cmxsi1cr_h;     /* CMX SI1 clock route high register */
         __be32  cmxsi1syr;      /* CMX SI1 SYNC route register */
-        __be32  cmxucr1;        /* CMX UCC1, UCC3 clock route register */
-        __be32  cmxucr2;        /* CMX UCC5, UCC7 clock route register */
-        __be32  cmxucr3;        /* CMX UCC2, UCC4 clock route register */
-        __be32  cmxucr4;        /* CMX UCC6, UCC8 clock route register */
+        __be32  cmxucr[4];      /* CMX UCCx clock route registers */
         __be32  cmxupcr;        /* CMX UPC clock route register */
         u8      res0[0x1C];
 } __attribute__ ((packed));
@@ -260,7 +258,6 @@ struct ucc_slow {
         __be16  utpt;
         u8      res4[0x52];
         u8      guemr;          /* UCC general extended mode register */
-        u8      res5[0x200 - 0x091];
 } __attribute__ ((packed));
 
 /* QE UCC Fast */
@@ -293,21 +290,13 @@ struct ucc_fast {
         __be32  urtry;          /* UCC retry counter register */
         u8      res8[0x4C];
         u8      guemr;          /* UCC general extended mode register */
-        u8      res9[0x100 - 0x091];
-} __attribute__ ((packed));
-
-/* QE UCC */
-struct ucc_common {
-        u8      res1[0x90];
-        u8      guemr;
-        u8      res2[0x200 - 0x091];
 } __attribute__ ((packed));
 
 struct ucc {
         union {
                 struct  ucc_slow slow;
                 struct  ucc_fast fast;
-                struct  ucc_common common;
+                u8      res[0x200];     /* UCC blocks are 512 bytes each */
         };
 } __attribute__ ((packed));
 
@@ -406,7 +395,7 @@ struct dbg {
 
 /* RISC Special Registers (Trap and Breakpoint) */
 struct rsp {
-        u8      fixme[0x100];
+        u32     reg[0x40];      /* 64 32-bit registers */
 } __attribute__ ((packed));
 
 struct qe_immap {
@@ -435,11 +424,13 @@ struct qe_immap {
         u8                      res13[0x600];
         struct upc              upc2;           /* MultiPHY UTOPIA POS Ctrlr 2*/
         struct sdma             sdma;           /* SDMA */
-        struct dbg              dbg;            /* Debug Space */
-        struct rsp              rsp[0x2];       /* RISC Special Registers
+        struct dbg              dbg;            /* 0x104080 - 0x1040FF
+                                                   Debug Space */
+        struct rsp              rsp[0x2];       /* 0x104100 - 0x1042FF
+                                                   RISC Special Registers
                                                    (Trap and Breakpoint) */
-        u8                      res14[0x300];
-        u8                      res15[0x3A00];
+        u8                      res14[0x300];   /* 0x104300 - 0x1045FF */
+        u8                      res15[0x3A00];  /* 0x104600 - 0x107FFF */
         u8                      res16[0x8000];  /* 0x108000 - 0x110000 */
         u8                      muram[0xC000];  /* 0x110000 - 0x11C000
                                                    Multi-user RAM */
@@ -450,7 +441,7 @@ struct qe_immap {
 extern struct qe_immap *qe_immr;
 extern phys_addr_t get_qe_base(void);
 
-static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+static inline unsigned long immrbar_virt_to_phys(void *address)
 {
         if ( ((u32)address >= (u32)qe_immr) &&
                         ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index bb8d965f96c6..affba7052fb6 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -86,7 +86,7 @@ extern unsigned long pci_dram_offset;
  */
 
 #ifdef CONFIG_PPC64
-#define IO_SET_SYNC_FLAG()      do { get_paca()->io_sync = 1; } while(0)
+#define IO_SET_SYNC_FLAG()      do { local_paca->io_sync = 1; } while(0)
 #else
 #define IO_SET_SYNC_FLAG()
 #endif
@@ -734,6 +734,32 @@ static inline void * bus_to_virt(unsigned long address)
 #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
 #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
 
+#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
+#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
+
+/* Clear and set bits in one shot.  These macros can be used to clear and
+ * set multiple bits in a register using a single read-modify-write.  These
+ * macros can also be used to set a multiple-bit bit pattern using a mask,
+ * by specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrsetbits(type, addr, clear, set) \
+        out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#ifdef __powerpc64__
+#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
+#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
+#endif
+
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_POWERPC_IO_H */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index 0485c53db2b5..1392db456523 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -124,6 +124,9 @@ struct irq_host {
         struct irq_host_ops     *ops;
         void                    *host_data;
         irq_hw_number_t         inval_irq;
+
+        /* Optional device node pointer */
+        struct device_node      *of_node;
 };
 
 /* The main irq map itself is an array of NR_IRQ entries containing the
@@ -142,7 +145,7 @@ extern irq_hw_number_t virq_to_hw(unsigned int virq);
 
 /**
  * irq_alloc_host - Allocate a new irq_host data structure
- * @node: device-tree node of the interrupt controller
+ * @of_node: optional device-tree node of the interrupt controller
  * @revmap_type: type of reverse mapping to use
  * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
  * @ops: map/unmap host callbacks
@@ -156,7 +159,8 @@ extern irq_hw_number_t virq_to_hw(unsigned int virq);
  * later during boot automatically (the reverse mapping will use the slow path
  * until that happens).
  */
-extern struct irq_host *irq_alloc_host(unsigned int revmap_type,
+extern struct irq_host *irq_alloc_host(struct device_node *of_node,
+                                       unsigned int revmap_type,
                                        unsigned int revmap_arg,
                                        struct irq_host_ops *ops,
                                        irq_hw_number_t inval_irq);
diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/include/asm-powerpc/iseries/hv_call_event.h
index 4cec4762076d..cc029d388e11 100644
--- a/include/asm-powerpc/iseries/hv_call_event.h
+++ b/include/asm-powerpc/iseries/hv_call_event.h
@@ -21,6 +21,9 @@
 #ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
 #define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
 
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+
 #include <asm/iseries/hv_call_sc.h>
 #include <asm/iseries/hv_types.h>
 #include <asm/abs_addr.h>
@@ -113,6 +116,13 @@ static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp,
                         eventData3, eventData4, eventData5);
 }
 
+extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag);
+extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iseries_hv_map(void *vaddr, size_t size,
+                        enum dma_data_direction direction);
+extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
+                        enum dma_data_direction direction);
+
 static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event)
 {
         return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event));
diff --git a/include/asm-powerpc/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h
index 6e323a13ac30..c59ee7e4bed1 100644
--- a/include/asm-powerpc/iseries/iommu.h
+++ b/include/asm-powerpc/iseries/iommu.h
@@ -22,6 +22,7 @@
  */
 
 struct pci_dev;
+struct vio_dev;
 struct device_node;
 struct iommu_table;
 
@@ -34,4 +35,7 @@ extern void iommu_table_getparms_iSeries(unsigned long busno,
                 unsigned char slotno, unsigned char virtbus,
                 struct iommu_table *tbl);
 
+extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev);
+extern void iommu_vio_init(void);
+
 #endif /* _ASM_POWERPC_ISERIES_IOMMU_H */
diff --git a/include/asm-powerpc/iseries/lpar_map.h b/include/asm-powerpc/iseries/lpar_map.h
index 2ec384d66abb..5e9f3e128ee2 100644
--- a/include/asm-powerpc/iseries/lpar_map.h
+++ b/include/asm-powerpc/iseries/lpar_map.h
@@ -22,6 +22,8 @@
 
 #include <asm/types.h>
 
+#endif
+
 /*
  * The iSeries hypervisor will set up mapping for one or more
  * ESID/VSID pairs (in SLB/segment registers) and will set up
@@ -56,6 +58,7 @@
 /* Hypervisor initially maps 32MB of the load area */
 #define HvPagesToMap    8192
 
+#ifndef __ASSEMBLY__
 struct LparMap {
         u64     xNumberEsids;   // Number of ESID/VSID pairs
         u64     xNumberRanges;  // Number of VA ranges to map
diff --git a/include/asm-powerpc/iseries/vio.h b/include/asm-powerpc/iseries/vio.h
index 7a95d296abd1..f9ac0d00b951 100644
--- a/include/asm-powerpc/iseries/vio.h
+++ b/include/asm-powerpc/iseries/vio.h
@@ -51,6 +51,116 @@
  */
 #define VIO_MAX_SUBTYPES 8
 
+#define VIOMAXBLOCKDMA  12
+
+struct open_data {
+        u64     disk_size;
+        u16     max_disk;
+        u16     cylinders;
+        u16     tracks;
+        u16     sectors;
+        u16     bytes_per_sector;
+};
+
+struct rw_data {
+        u64     offset;
+        struct {
+                u32     token;
+                u32     reserved;
+                u64     len;
+        } dma_info[VIOMAXBLOCKDMA];
+};
+
+struct vioblocklpevent {
+        struct HvLpEvent        event;
+        u32                     reserved;
+        u16                     version;
+        u16                     sub_result;
+        u16                     disk;
+        u16                     flags;
+        union {
+                struct open_data        open_data;
+                struct rw_data          rw_data;
+                u64                     changed;
+        } u;
+};
+
+#define vioblockflags_ro   0x0001
+
+enum vioblocksubtype {
+        vioblockopen = 0x0001,
+        vioblockclose = 0x0002,
+        vioblockread = 0x0003,
+        vioblockwrite = 0x0004,
+        vioblockflush = 0x0005,
+        vioblockcheck = 0x0007
+};
+
+struct viocdlpevent {
+        struct HvLpEvent        event;
+        u32                     reserved;
+        u16                     version;
+        u16                     sub_result;
+        u16                     disk;
+        u16                     flags;
+        u32                     token;
+        u64                     offset;         /* On open, max number of disks */
+        u64                     len;            /* On open, size of the disk */
+        u32                     block_size;     /* Only set on open */
+        u32                     media_size;     /* Only set on open */
+};
+
+enum viocdsubtype {
+        viocdopen = 0x0001,
+        viocdclose = 0x0002,
+        viocdread = 0x0003,
+        viocdwrite = 0x0004,
+        viocdlockdoor = 0x0005,
+        viocdgetinfo = 0x0006,
+        viocdcheck = 0x0007
+};
+
+struct viotapelpevent {
+        struct HvLpEvent event;
+        u32 reserved;
+        u16 version;
+        u16 sub_type_result;
+        u16 tape;
+        u16 flags;
+        u32 token;
+        u64 len;
+        union {
+                struct {
+                        u32 tape_op;
+                        u32 count;
+                } op;
+                struct {
+                        u32 type;
+                        u32 resid;
+                        u32 dsreg;
+                        u32 gstat;
+                        u32 erreg;
+                        u32 file_no;
+                        u32 block_no;
+                } get_status;
+                struct {
+                        u32 block_no;
+                } get_pos;
+        } u;
+};
+
+enum viotapesubtype {
+        viotapeopen = 0x0001,
+        viotapeclose = 0x0002,
+        viotaperead = 0x0003,
+        viotapewrite = 0x0004,
+        viotapegetinfo = 0x0005,
+        viotapeop = 0x0006,
+        viotapegetpos = 0x0007,
+        viotapesetpos = 0x0008,
+        viotapegetstatus = 0x0009
+};
+
 /*
  * Each subtype can register a handler to process their events.
  * The handler must have this interface.
@@ -68,6 +178,8 @@ extern void vio_set_hostlp(void);
 extern void *vio_get_event_buffer(int subtype);
 extern void vio_free_event_buffer(int subtype, void *buffer);
 
+extern struct vio_dev *vio_create_viodasd(u32 unit);
+
 extern HvLpIndex viopath_hostLp;
 extern HvLpIndex viopath_ourLp;
 
@@ -150,8 +262,4 @@ enum viochar_rc {
         viochar_rc_ebusy = 1
 };
 
-struct device;
-
-extern struct device *iSeries_vio_dev;
-
 #endif /* _ASM_POWERPC_ISERIES_VIO_H */
diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h
new file mode 100644
index 000000000000..b617dac82969
--- /dev/null
+++ b/include/asm-powerpc/kgdb.h
@@ -0,0 +1,57 @@
+/*
+ * kgdb.h: Defines and declarations for serial line source level
+ *         remote debugging of the Linux kernel using gdb.
+ *
+ * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifdef __KERNEL__
+#ifndef _PPC_KGDB_H
+#define _PPC_KGDB_H
+
+#ifndef __ASSEMBLY__
+
+/* Things specific to the gen550 backend. */
+struct uart_port;
+
+extern void gen550_progress(char *, unsigned short);
+extern void gen550_kgdb_map_scc(void);
+extern void gen550_init(int, struct uart_port *);
+
+/* Things specific to the pmac backend. */
+extern void zs_kgdb_hook(int tty_num);
+
+/* To init the kgdb engine. (called by serial hook)*/
+extern void set_debug_traps(void);
+
+/* To enter the debugger explicitly. */
+extern void breakpoint(void);
+
+/* For taking exceptions
+ * these are defined in traps.c
+ */
+extern int (*debugger)(struct pt_regs *regs);
+extern int (*debugger_bpt)(struct pt_regs *regs);
+extern int (*debugger_sstep)(struct pt_regs *regs);
+extern int (*debugger_iabr_match)(struct pt_regs *regs);
+extern int (*debugger_dabr_match)(struct pt_regs *regs);
+extern void (*debugger_fault_handler)(struct pt_regs *regs);
+
+/* What we bring to the party */
+int kgdb_bpt(struct pt_regs *regs);
+int kgdb_sstep(struct pt_regs *regs);
+void kgdb(struct pt_regs *regs);
+int kgdb_iabr_match(struct pt_regs *regs);
+int kgdb_dabr_match(struct pt_regs *regs);
+
+/*
+ * external low-level support routines (ie macserial.c)
+ */
+extern void kgdb_interruptible(int); /* control interrupts from serial */
+extern void putDebugChar(char);   /* write a single character      */
+extern char getDebugChar(void);   /* read and return a single char */
+
+#endif /* !(__ASSEMBLY__) */
+#endif /* !(_PPC_KGDB_H) */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h
index 0c5880f70225..b5f9f4c9c294 100644
--- a/include/asm-powerpc/lmb.h
+++ b/include/asm-powerpc/lmb.h
@@ -1,5 +1,5 @@
-#ifndef _PPC64_LMB_H
-#define _PPC64_LMB_H
+#ifndef _ASM_POWERPC_LMB_H
+#define _ASM_POWERPC_LMB_H
 #ifdef __KERNEL__
 
 /*
@@ -77,4 +77,4 @@ lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
 }
 
 #endif /* __KERNEL__ */
-#endif /* _PPC64_LMB_H */
+#endif /* _ASM_POWERPC_LMB_H */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 71c6e7eb2a26..6968f4300dca 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -51,22 +51,22 @@ struct machdep_calls {
 #ifdef CONFIG_PPC64
         void            (*hpte_invalidate)(unsigned long slot,
                                            unsigned long va,
-                                           int psize,
+                                           int psize, int ssize,
                                            int local);
         long            (*hpte_updatepp)(unsigned long slot, 
                                          unsigned long newpp, 
                                          unsigned long va,
-                                         int pize,
+                                         int psize, int ssize,
                                          int local);
         void            (*hpte_updateboltedpp)(unsigned long newpp, 
                                                unsigned long ea,
-                                               int psize);
+                                               int psize, int ssize);
         long            (*hpte_insert)(unsigned long hpte_group,
                                        unsigned long va,
                                        unsigned long prpn,
                                        unsigned long rflags,
                                        unsigned long vflags,
-                                       int psize);
+                                       int psize, int ssize);
         long            (*hpte_remove)(unsigned long hpte_group);
         void            (*flush_hash_range)(unsigned long number, int local);
 
@@ -99,7 +99,7 @@ struct machdep_calls {
 #endif /* CONFIG_PPC64 */
 
         int             (*probe)(void);
-        void            (*setup_arch)(void);
+        void            (*setup_arch)(void); /* Optional, may be NULL */
         void            (*init_early)(void);
         /* Optional, may be NULL. */
         void            (*show_cpuinfo)(struct seq_file *m);
diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h
new file mode 100644
index 000000000000..7d37f77043ac
--- /dev/null
+++ b/include/asm-powerpc/mmu-40x.h
@@ -0,0 +1,65 @@
+#ifndef _ASM_POWERPC_MMU_40X_H_
+#define _ASM_POWERPC_MMU_40X_H_
+
+/*
+ * PPC40x support
+ */
+
+#define PPC40X_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion.  On all architectures, the data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
+ * instructions.
+ */
+
+#define TLB_LO          1
+#define TLB_HI          0
+
+#define TLB_DATA        TLB_LO
+#define TLB_TAG         TLB_HI
+
+/* Tag portion */
+
+#define TLB_EPN_MASK    0xFFFFFC00      /* Effective Page Number */
+#define TLB_PAGESZ_MASK 0x00000380
+#define TLB_PAGESZ(x)   (((x) & 0x7) << 7)
+#define   PAGESZ_1K             0
+#define   PAGESZ_4K             1
+#define   PAGESZ_16K            2
+#define   PAGESZ_64K            3
+#define   PAGESZ_256K           4
+#define   PAGESZ_1M             5
+#define   PAGESZ_4M             6
+#define   PAGESZ_16M            7
+#define TLB_VALID       0x00000040      /* Entry is valid */
+
+/* Data portion */
+
+#define TLB_RPN_MASK    0xFFFFFC00      /* Real Page Number */
+#define TLB_PERM_MASK   0x00000300
+#define TLB_EX          0x00000200      /* Instruction execution allowed */
+#define TLB_WR          0x00000100      /* Writes permitted */
+#define TLB_ZSEL_MASK   0x000000F0
+#define TLB_ZSEL(x)     (((x) & 0xF) << 4)
+#define TLB_ATTR_MASK   0x0000000F
+#define TLB_W           0x00000008      /* Caching is write-through */
+#define TLB_I           0x00000004      /* Caching is inhibited */
+#define TLB_M           0x00000002      /* Memory is coherent */
+#define TLB_G           0x00000001      /* Memory is guarded from prefetch */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long phys_addr_t;
+
+typedef struct {
+        unsigned long id;
+        unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
index 3112ad14ad95..82328dec2b52 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/include/asm-powerpc/mmu-hash64.h
@@ -47,6 +47,8 @@ extern char initial_stab[];
 
 /* Bits in the SLB VSID word */
 #define SLB_VSID_SHIFT          12
+#define SLB_VSID_SHIFT_1T       24
+#define SLB_VSID_SSIZE_SHIFT    62
 #define SLB_VSID_B              ASM_CONST(0xc000000000000000)
 #define SLB_VSID_B_256M         ASM_CONST(0x0000000000000000)
 #define SLB_VSID_B_1T           ASM_CONST(0x4000000000000000)
@@ -66,6 +68,7 @@ extern char initial_stab[];
 #define SLB_VSID_USER           (SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C)
 
 #define SLBIE_C                 (0x08000000)
+#define SLBIE_SSIZE_SHIFT       25
 
 /*
  * Hash table
@@ -77,7 +80,7 @@ extern char initial_stab[];
 #define HPTE_V_AVPN_SHIFT       7
 #define HPTE_V_AVPN             ASM_CONST(0x3fffffffffffff80)
 #define HPTE_V_AVPN_VAL(x)      (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT)
-#define HPTE_V_COMPARE(x,y)     (!(((x) ^ (y)) & HPTE_V_AVPN))
+#define HPTE_V_COMPARE(x,y)     (!(((x) ^ (y)) & 0xffffffffffffff80))
 #define HPTE_V_BOLTED           ASM_CONST(0x0000000000000010)
 #define HPTE_V_LOCK             ASM_CONST(0x0000000000000008)
 #define HPTE_V_LARGE            ASM_CONST(0x0000000000000004)
@@ -164,16 +167,19 @@ struct mmu_psize_def
 #define MMU_SEGSIZE_256M        0
 #define MMU_SEGSIZE_1T          1
 
+
 #ifndef __ASSEMBLY__
 
 /*
- * The current system page sizes
+ * The current system page and segment sizes
  */
 extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 extern int mmu_linear_psize;
 extern int mmu_virtual_psize;
 extern int mmu_vmalloc_psize;
 extern int mmu_io_psize;
+extern int mmu_kernel_ssize;
+extern int mmu_highuser_ssize;
 
 /*
  * If the processor supports 64k normal pages but not 64k cache
@@ -195,13 +201,15 @@ extern int mmu_huge_psize;
  * This function sets the AVPN and L fields of the HPTE  appropriately
  * for the page size
  */
-static inline unsigned long hpte_encode_v(unsigned long va, int psize)
+static inline unsigned long hpte_encode_v(unsigned long va, int psize,
+                                          int ssize)
 {
-        unsigned long v =
+        unsigned long v;
         v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
         v <<= HPTE_V_AVPN_SHIFT;
         if (psize != MMU_PAGE_4K)
                 v |= HPTE_V_LARGE;
+        v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
         return v;
 }
 
@@ -226,20 +234,40 @@ static inline unsigned long hpte_encode_r(unsigned long pa, int psize)
 }
 
 /*
- * This hashes a virtual address for a 256Mb segment only for now
+ * Build a VA given VSID, EA and segment size
  */
+static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid,
+                                   int ssize)
+{
+        if (ssize == MMU_SEGSIZE_256M)
+                return (vsid << 28) | (ea & 0xfffffffUL);
+        return (vsid << 40) | (ea & 0xffffffffffUL);
+}
 
-static inline unsigned long hpt_hash(unsigned long va, unsigned int shift)
+/*
+ * This hashes a virtual address
+ */
+
+static inline unsigned long hpt_hash(unsigned long va, unsigned int shift,
+                                     int ssize)
 {
-        return ((va >> 28) & 0x7fffffffffUL) ^ ((va & 0x0fffffffUL) >> shift);
+        unsigned long hash, vsid;
+
+        if (ssize == MMU_SEGSIZE_256M) {
+                hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift);
+        } else {
+                vsid = va >> 40;
+                hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift);
+        }
+        return hash & 0x7fffffffffUL;
 }
 
 extern int __hash_page_4K(unsigned long ea, unsigned long access,
                           unsigned long vsid, pte_t *ptep, unsigned long trap,
-                          unsigned int local);
+                          unsigned int local, int ssize);
 extern int __hash_page_64K(unsigned long ea, unsigned long access,
                            unsigned long vsid, pte_t *ptep, unsigned long trap,
-                           unsigned int local);
+                           unsigned int local, int ssize);
 struct mm_struct;
 extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
 extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
@@ -248,7 +276,7 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
 
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
                              unsigned long pstart, unsigned long mode,
-                             int psize);
+                             int psize, int ssize);
 
 extern void htab_initialize(void);
 extern void htab_initialize_secondary(void);
@@ -256,6 +284,7 @@ extern void hpte_init_native(void);
 extern void hpte_init_lpar(void);
 extern void hpte_init_iSeries(void);
 extern void hpte_init_beat(void);
+extern void hpte_init_beat_v3(void);
 
 extern void stabs_alloc(void);
 extern void slb_initialize(void);
@@ -316,12 +345,17 @@ extern void slb_vmalloc_update(void);
  * which are used by the iSeries firmware.
  */
 
-#define VSID_MULTIPLIER ASM_CONST(200730139)    /* 28-bit prime */
-#define VSID_BITS       36
-#define VSID_MODULUS    ((1UL<<VSID_BITS)-1)
+#define VSID_MULTIPLIER_256M    ASM_CONST(200730139)    /* 28-bit prime */
+#define VSID_BITS_256M          36
+#define VSID_MODULUS_256M       ((1UL<<VSID_BITS_256M)-1)
 
-#define CONTEXT_BITS    19
-#define USER_ESID_BITS  16
+#define VSID_MULTIPLIER_1T      ASM_CONST(12538073)     /* 24-bit prime */
+#define VSID_BITS_1T            24
+#define VSID_MODULUS_1T         ((1UL<<VSID_BITS_1T)-1)
+
+#define CONTEXT_BITS            19
+#define USER_ESID_BITS          16
+#define USER_ESID_BITS_1T       4
 
 #define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT))
 
@@ -335,17 +369,17 @@ extern void slb_vmalloc_update(void);
  *      rx = scratch register (clobbered)
  *
  *      - rt and rx must be different registers
- *      - The answer will end up in the low 36 bits of rt.  The higher
+ *      - The answer will end up in the low VSID_BITS bits of rt.  The higher
  *        bits may contain other garbage, so you may need to mask the
  *        result.
  */
-#define ASM_VSID_SCRAMBLE(rt, rx)       \
-        lis     rx,VSID_MULTIPLIER@h;                                   \
-        ori     rx,rx,VSID_MULTIPLIER@l;                                \
+#define ASM_VSID_SCRAMBLE(rt, rx, size)                                 \
+        lis     rx,VSID_MULTIPLIER_##size@h;                            \
+        ori     rx,rx,VSID_MULTIPLIER_##size@l;                         \
         mulld   rt,rt,rx;               /* rt = rt * MULTIPLIER */      \
                                                                         \
-        srdi    rx,rt,VSID_BITS;                                        \
-        clrldi  rt,rt,(64-VSID_BITS);                                   \
+        srdi    rx,rt,VSID_BITS_##size;                                 \
+        clrldi  rt,rt,(64-VSID_BITS_##size);                            \
         add     rt,rt,rx;               /* add high and low bits */     \
         /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and         \
          * 2^36-1+2^28-1.  That in particular means that if r3 >=       \
@@ -354,7 +388,7 @@ extern void slb_vmalloc_update(void);
          * doesn't, the answer is the low 36 bits of r3+1.  So in all   \
          * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
         addi    rx,rt,1;                                                \
-        srdi    rx,rx,VSID_BITS;        /* extract 2^36 bit */          \
+        srdi    rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */   \
         add     rt,rt,rx
 
 
@@ -376,37 +410,60 @@ typedef struct {
 } mm_context_t;
 
 
-static inline unsigned long vsid_scramble(unsigned long protovsid)
-{
 #if 0
-        /* The code below is equivalent to this function for arguments
-         * < 2^VSID_BITS, which is all this should ever be called
-         * with.  However gcc is not clever enough to compute the
-         * modulus (2^n-1) without a second multiply. */
-        return ((protovsid * VSID_MULTIPLIER) % VSID_MODULUS);
-#else /* 1 */
-        unsigned long x;
+/*
+ * The code below is equivalent to this function for arguments
+ * < 2^VSID_BITS, which is all this should ever be called
+ * with.  However gcc is not clever enough to compute the
+ * modulus (2^n-1) without a second multiply.
+ */
+#define vsid_scrample(protovsid, size) \
+        ((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size))
 
-        x = protovsid * VSID_MULTIPLIER;
-        x = (x >> VSID_BITS) + (x & VSID_MODULUS);
-        return (x + ((x+1) >> VSID_BITS)) & VSID_MODULUS;
+#else /* 1 */
+#define vsid_scramble(protovsid, size) \
+        ({                                                               \
+                unsigned long x;                                         \
+                x = (protovsid) * VSID_MULTIPLIER_##size;                \
+                x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \
+                (x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \
+        })
 #endif /* 1 */
-}
 
 /* This is only valid for addresses >= KERNELBASE */
-static inline unsigned long get_kernel_vsid(unsigned long ea)
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
 {
-        return vsid_scramble(ea >> SID_SHIFT);
+        if (ssize == MMU_SEGSIZE_256M)
+                return vsid_scramble(ea >> SID_SHIFT, 256M);
+        return vsid_scramble(ea >> SID_SHIFT_1T, 1T);
 }
 
-/* This is only valid for user addresses (which are below 2^41) */
-static inline unsigned long get_vsid(unsigned long context, unsigned long ea)
+/* Returns the segment size indicator for a user address */
+static inline int user_segment_size(unsigned long addr)
 {
-        return vsid_scramble((context << USER_ESID_BITS)
-                             | (ea >> SID_SHIFT));
+        /* Use 1T segments if possible for addresses >= 1T */
+        if (addr >= (1UL << SID_SHIFT_1T))
+                return mmu_highuser_ssize;
+        return MMU_SEGSIZE_256M;
 }
 
-#define VSID_SCRAMBLE(pvsid)    (((pvsid) * VSID_MULTIPLIER) % VSID_MODULUS)
+/* This is only valid for user addresses (which are below 2^44) */
+static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
+                                     int ssize)
+{
+        if (ssize == MMU_SEGSIZE_256M)
+                return vsid_scramble((context << USER_ESID_BITS)
+                                     | (ea >> SID_SHIFT), 256M);
+        return vsid_scramble((context << USER_ESID_BITS_1T)
+                             | (ea >> SID_SHIFT_1T), 1T);
+}
+
+/*
+ * This is only used on legacy iSeries in lparmap.c,
+ * hence the 256MB segment assumption.
+ */
+#define VSID_SCRAMBLE(pvsid)    (((pvsid) * VSID_MULTIPLIER_256M) %     \
+                                 VSID_MODULUS_256M)
 #define KERNEL_VSID(ea)         VSID_SCRAMBLE(GET_ESID(ea))
 
 /* Physical address used by some IO functions */
diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h
index d44d211e7588..4c0e1b4f975c 100644
--- a/include/asm-powerpc/mmu.h
+++ b/include/asm-powerpc/mmu.h
@@ -8,6 +8,9 @@
 #elif defined(CONFIG_PPC_STD_MMU)
 /* 32-bit classic hash table MMU */
 #  include <asm/mmu-hash32.h>
+#elif defined(CONFIG_40x)
+/* 40x-style software loaded TLB */
+#  include <asm/mmu-40x.h>
 #elif defined(CONFIG_44x)
 /* 44x-style software loaded TLB */
 #  include <asm/mmu-44x.h>
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index c4631f6dd4f9..24751df791ac 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -243,7 +243,7 @@ struct mpc52xx_cdm {
 
 extern void __iomem * mpc52xx_find_and_map(const char *);
 extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
-extern void mpc52xx_setup_cpu(void);
+extern void mpc5200_setup_xlb_arbiter(void);
 extern void mpc52xx_declare_of_platform_devices(void);
 
 extern void mpc52xx_init_irq(void);
@@ -262,6 +262,16 @@ struct mpc52xx_suspend {
 extern struct mpc52xx_suspend mpc52xx_suspend;
 extern int __init mpc52xx_pm_init(void);
 extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
+
+#ifdef CONFIG_PPC_LITE5200
+extern int __init lite5200_pm_init(void);
+
+/* lite5200 calls mpc5200 suspend functions, so here they are */
+extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_enter(suspend_state_t);
+extern int mpc52xx_pm_finish(suspend_state_t);
+extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
+#endif
 #endif /* CONFIG_PM */
 
 #endif /* __ASM_POWERPC_MPC52xx_H__ */
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
new file mode 100644
index 000000000000..26690d2b32f5
--- /dev/null
+++ b/include/asm-powerpc/mpc52xx_psc.h
@@ -0,0 +1,191 @@
+/*
+ * include/asm-ppc/mpc52xx_psc.h
+ *
+ * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
+ * PSCs. Theses are shared between multiple drivers since a PSC can be
+ * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based/Extracted from some header of the 2.4 originally written by
+ * Dale Farnsworth <dfarnsworth@mvista.com>
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_MPC52xx_PSC_H__
+#define __ASM_MPC52xx_PSC_H__
+
+#include <asm/types.h>
+
+/* Max number of PSCs */
+#define MPC52xx_PSC_MAXNUM      6
+
+/* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_CDE      0x0080
+#define MPC52xx_PSC_SR_RXRDY    0x0100
+#define MPC52xx_PSC_SR_RXFULL   0x0200
+#define MPC52xx_PSC_SR_TXRDY    0x0400
+#define MPC52xx_PSC_SR_TXEMP    0x0800
+#define MPC52xx_PSC_SR_OE       0x1000
+#define MPC52xx_PSC_SR_PE       0x2000
+#define MPC52xx_PSC_SR_FE       0x4000
+#define MPC52xx_PSC_SR_RB       0x8000
+
+/* PSC Command values */
+#define MPC52xx_PSC_RX_ENABLE           0x0001
+#define MPC52xx_PSC_RX_DISABLE          0x0002
+#define MPC52xx_PSC_TX_ENABLE           0x0004
+#define MPC52xx_PSC_TX_DISABLE          0x0008
+#define MPC52xx_PSC_SEL_MODE_REG_1      0x0010
+#define MPC52xx_PSC_RST_RX              0x0020
+#define MPC52xx_PSC_RST_TX              0x0030
+#define MPC52xx_PSC_RST_ERR_STAT        0x0040
+#define MPC52xx_PSC_RST_BRK_CHG_INT     0x0050
+#define MPC52xx_PSC_START_BRK           0x0060
+#define MPC52xx_PSC_STOP_BRK            0x0070
+
+/* PSC TxRx FIFO status bits */
+#define MPC52xx_PSC_RXTX_FIFO_ERR       0x0040
+#define MPC52xx_PSC_RXTX_FIFO_UF        0x0020
+#define MPC52xx_PSC_RXTX_FIFO_OF        0x0010
+#define MPC52xx_PSC_RXTX_FIFO_FR        0x0008
+#define MPC52xx_PSC_RXTX_FIFO_FULL      0x0004
+#define MPC52xx_PSC_RXTX_FIFO_ALARM     0x0002
+#define MPC52xx_PSC_RXTX_FIFO_EMPTY     0x0001
+
+/* PSC interrupt mask bits */
+#define MPC52xx_PSC_IMR_TXRDY           0x0100
+#define MPC52xx_PSC_IMR_RXRDY           0x0200
+#define MPC52xx_PSC_IMR_DB              0x0400
+#define MPC52xx_PSC_IMR_IPC             0x8000
+
+/* PSC input port change bit */
+#define MPC52xx_PSC_CTS                 0x01
+#define MPC52xx_PSC_DCD                 0x02
+#define MPC52xx_PSC_D_CTS               0x10
+#define MPC52xx_PSC_D_DCD               0x20
+
+/* PSC mode fields */
+#define MPC52xx_PSC_MODE_5_BITS                 0x00
+#define MPC52xx_PSC_MODE_6_BITS                 0x01
+#define MPC52xx_PSC_MODE_7_BITS                 0x02
+#define MPC52xx_PSC_MODE_8_BITS                 0x03
+#define MPC52xx_PSC_MODE_BITS_MASK              0x03
+#define MPC52xx_PSC_MODE_PAREVEN                0x00
+#define MPC52xx_PSC_MODE_PARODD                 0x04
+#define MPC52xx_PSC_MODE_PARFORCE               0x08
+#define MPC52xx_PSC_MODE_PARNONE                0x10
+#define MPC52xx_PSC_MODE_ERR                    0x20
+#define MPC52xx_PSC_MODE_FFULL                  0x40
+#define MPC52xx_PSC_MODE_RXRTS                  0x80
+
+#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS        0x00
+#define MPC52xx_PSC_MODE_ONE_STOP               0x07
+#define MPC52xx_PSC_MODE_TWO_STOP               0x0f
+
+#define MPC52xx_PSC_RFNUM_MASK  0x01ff
+
+
+/* Structure of the hardware registers */
+struct mpc52xx_psc {
+        u8              mode;           /* PSC + 0x00 */
+        u8              reserved0[3];
+        union {                         /* PSC + 0x04 */
+                u16     status;
+                u16     clock_select;
+        } sr_csr;
+#define mpc52xx_psc_status      sr_csr.status
+#define mpc52xx_psc_clock_select sr_csr.clock_select
+        u16             reserved1;
+        u8              command;        /* PSC + 0x08 */
+        u8              reserved2[3];
+        union {                         /* PSC + 0x0c */
+                u8      buffer_8;
+                u16     buffer_16;
+                u32     buffer_32;
+        } buffer;
+#define mpc52xx_psc_buffer_8    buffer.buffer_8
+#define mpc52xx_psc_buffer_16   buffer.buffer_16
+#define mpc52xx_psc_buffer_32   buffer.buffer_32
+        union {                         /* PSC + 0x10 */
+                u8      ipcr;
+                u8      acr;
+        } ipcr_acr;
+#define mpc52xx_psc_ipcr        ipcr_acr.ipcr
+#define mpc52xx_psc_acr         ipcr_acr.acr
+        u8              reserved3[3];
+        union {                         /* PSC + 0x14 */
+                u16     isr;
+                u16     imr;
+        } isr_imr;
+#define mpc52xx_psc_isr         isr_imr.isr
+#define mpc52xx_psc_imr         isr_imr.imr
+        u16             reserved4;
+        u8              ctur;           /* PSC + 0x18 */
+        u8              reserved5[3];
+        u8              ctlr;           /* PSC + 0x1c */
+        u8              reserved6[3];
+        u16             ccr;            /* PSC + 0x20 */
+        u8              reserved7[14];
+        u8              ivr;            /* PSC + 0x30 */
+        u8              reserved8[3];
+        u8              ip;             /* PSC + 0x34 */
+        u8              reserved9[3];
+        u8              op1;            /* PSC + 0x38 */
+        u8              reserved10[3];
+        u8              op0;            /* PSC + 0x3c */
+        u8              reserved11[3];
+        u32             sicr;           /* PSC + 0x40 */
+        u8              ircr1;          /* PSC + 0x44 */
+        u8              reserved13[3];
+        u8              ircr2;          /* PSC + 0x44 */
+        u8              reserved14[3];
+        u8              irsdr;          /* PSC + 0x4c */
+        u8              reserved15[3];
+        u8              irmdr;          /* PSC + 0x50 */
+        u8              reserved16[3];
+        u8              irfdr;          /* PSC + 0x54 */
+        u8              reserved17[3];
+        u16             rfnum;          /* PSC + 0x58 */
+        u16             reserved18;
+        u16             tfnum;          /* PSC + 0x5c */
+        u16             reserved19;
+        u32             rfdata;         /* PSC + 0x60 */
+        u16             rfstat;         /* PSC + 0x64 */
+        u16             reserved20;
+        u8              rfcntl;         /* PSC + 0x68 */
+        u8              reserved21[5];
+        u16             rfalarm;        /* PSC + 0x6e */
+        u16             reserved22;
+        u16             rfrptr;         /* PSC + 0x72 */
+        u16             reserved23;
+        u16             rfwptr;         /* PSC + 0x76 */
+        u16             reserved24;
+        u16             rflrfptr;       /* PSC + 0x7a */
+        u16             reserved25;
+        u16             rflwfptr;       /* PSC + 0x7e */
+        u32             tfdata;         /* PSC + 0x80 */
+        u16             tfstat;         /* PSC + 0x84 */
+        u16             reserved26;
+        u8              tfcntl;         /* PSC + 0x88 */
+        u8              reserved27[5];
+        u16             tfalarm;        /* PSC + 0x8e */
+        u16             reserved28;
+        u16             tfrptr;         /* PSC + 0x92 */
+        u16             reserved29;
+        u16             tfwptr;         /* PSC + 0x96 */
+        u16             reserved30;
+        u16             tflrfptr;       /* PSC + 0x9a */
+        u16             reserved31;
+        u16             tflwfptr;       /* PSC + 0x9e */
+};
+
+
+#endif  /* __ASM_MPC52xx_PSC_H__ */
diff --git a/include/asm-powerpc/mpc85xx.h b/include/asm-powerpc/mpc85xx.h
deleted file mode 100644
index 54142997a584..000000000000
--- a/include/asm-powerpc/mpc85xx.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * include/asm-powerpc/mpc85xx.h
- *
- * MPC85xx definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MPC85xx_H__
-#define __ASM_MPC85xx_H__
-
-#include <asm/mmu.h>
-
-#ifdef CONFIG_85xx
-
-#if defined(CONFIG_MPC8540_ADS) || defined(CONFIG_MPC8560_ADS)
-#include <platforms/85xx/mpc85xx_ads.h>
-#endif
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
-#include <platforms/85xx/mpc8555_cds.h>
-#endif
-#ifdef CONFIG_MPC85xx_CDS
-#include <platforms/85xx/mpc85xx_cds.h>
-#endif
-
-/* Let modules/drivers get at CCSRBAR */
-extern phys_addr_t get_ccsrbar(void);
-
-#ifdef MODULE
-#define CCSRBAR get_ccsrbar()
-#else
-#define CCSRBAR BOARD_CCSRBAR
-#endif
-
-#endif /* CONFIG_85xx */
-#endif /* __ASM_MPC85xx_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index 262db6b8da73..ae84dde3bc7f 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -224,8 +224,6 @@ struct mpic_reg_bank {
         u32 __iomem     *base;
 #ifdef CONFIG_PPC_DCR
         dcr_host_t      dhost;
-        unsigned int    dbase;
-        unsigned int    doff;
 #endif /* CONFIG_PPC_DCR */
 };
 
@@ -240,9 +238,6 @@ struct mpic_irq_save {
 /* The instance data of a given MPIC */
 struct mpic
 {
-        /* The device node of the interrupt controller */
-        struct device_node      *of_node;
-
         /* The remapper for this MPIC */
         struct irq_host         *irqhost;
 
@@ -292,10 +287,6 @@ struct mpic
         struct mpic_reg_bank    cpuregs[MPIC_MAX_CPUS];
         struct mpic_reg_bank    isus[MPIC_MAX_ISU];
 
-#ifdef CONFIG_PPC_DCR
-        unsigned int            dcr_base;
-#endif
-
         /* Protected sources */
         unsigned long           *protected;
 
@@ -309,6 +300,10 @@ struct mpic
         unsigned long           *hwirq_bitmap;
 #endif
 
+#ifdef CONFIG_MPIC_BROKEN_REGREAD
+        u32                     isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];
+#endif
+
         /* link */
         struct mpic             *next;
 
diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h
index f3563e11e260..9877982508bf 100644
--- a/include/asm-powerpc/nvram.h
+++ b/include/asm-powerpc/nvram.h
@@ -63,8 +63,10 @@ struct nvram_partition {
 };
 
 
-extern int nvram_write_error_log(char * buff, int length, unsigned int err_type);
-extern int nvram_read_error_log(char * buff, int length, unsigned int * err_type);
+extern int nvram_write_error_log(char * buff, int length,
+                                         unsigned int err_type, unsigned int err_seq);
+extern int nvram_read_error_log(char * buff, int length,
+                                         unsigned int * err_type, unsigned int *err_seq);
 extern int nvram_clear_error_log(void);
 extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
 
diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h
index c6a5b1735666..fcd7b428ed0b 100644
--- a/include/asm-powerpc/paca.h
+++ b/include/asm-powerpc/paca.h
@@ -21,7 +21,18 @@
 #include        <asm/mmu.h>
 
 register struct paca_struct *local_paca asm("r13");
+
+#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP)
+extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
+/*
+ * Add standard checks that preemption cannot occur when using get_paca():
+ * otherwise the paca_struct it points to may be the wrong one just after.
+ */
+#define get_paca()      ((void) debug_smp_processor_id(), local_paca)
+#else
 #define get_paca()      local_paca
+#endif
+
 #define get_lppaca()    (get_paca()->lppaca_ptr)
 #define get_slb_shadow()        (get_paca()->slb_shadow_ptr)
 
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
index 3448a3d4bc64..4ee82c61e4d7 100644
--- a/include/asm-powerpc/page_64.h
+++ b/include/asm-powerpc/page_64.h
@@ -26,12 +26,18 @@
  */
 #define PAGE_FACTOR             (PAGE_SHIFT - HW_PAGE_SHIFT)
 
-/* Segment size */
+/* Segment size; normal 256M segments */
 #define SID_SHIFT               28
-#define SID_MASK                0xfffffffffUL
+#define SID_MASK                ASM_CONST(0xfffffffff)
 #define ESID_MASK               0xfffffffff0000000UL
 #define GET_ESID(x)             (((x) >> SID_SHIFT) & SID_MASK)
 
+/* 1T segments */
+#define SID_SHIFT_1T            40
+#define SID_MASK_1T             0xffffffUL
+#define ESID_MASK_1T            0xffffff0000000000UL
+#define GET_ESID_1T(x)          (((x) >> SID_SHIFT_1T) & SID_MASK_1T)
+
 #ifndef __ASSEMBLY__
 #include <asm/cache.h>
 
@@ -121,6 +127,7 @@ extern unsigned int get_slice_psize(struct mm_struct *mm,
 
 extern void slice_init_context(struct mm_struct *mm, unsigned int psize);
 extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
+#define slice_mm_new_context(mm)        ((mm)->context.id == 0)
 
 #define ARCH_HAS_HUGEPAGE_ONLY_RANGE
 extern int is_hugepage_only_range(struct mm_struct *m,
@@ -130,6 +137,12 @@ extern int is_hugepage_only_range(struct mm_struct *m,
 #endif /* __ASSEMBLY__ */
 #else
 #define slice_init()
+#define slice_set_user_psize(mm, psize)         \
+do {                                            \
+        (mm)->context.user_psize = (psize);     \
+        (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
+} while (0)
+#define slice_mm_new_context(mm)        1
 #endif /* CONFIG_PPC_MM_SLICES */
 
 #ifdef CONFIG_HUGETLB_PAGE
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index e909769b6410..dc318458b5fe 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -98,7 +98,8 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
                                  int dev_fn, int cap);
 
 extern void setup_indirect_pci(struct pci_controller* hose,
-                               u32 cfg_addr, u32 cfg_data, u32 flags);
+                               resource_size_t cfg_addr,
+                               resource_size_t cfg_data, u32 flags);
 extern void setup_grackle(struct pci_controller *hose);
 extern void __init update_bridge_resource(struct pci_dev *dev,
                                           struct resource *res);
diff --git a/include/asm-powerpc/percpu.h b/include/asm-powerpc/percpu.h
index 73dc8ba4010d..6b229626d3ff 100644
--- a/include/asm-powerpc/percpu.h
+++ b/include/asm-powerpc/percpu.h
@@ -28,7 +28,7 @@
 /* var is in discarded region: offset to particular copy we want */
 #define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
 #define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()))
+#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, local_paca->data_offset))
 
 /* A macro to avoid #include hell... */
 #define percpu_modcopy(pcpudst, src, size)                      \
diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h
index add5481fd7c7..818e2abc81e2 100644
--- a/include/asm-powerpc/pgtable-4k.h
+++ b/include/asm-powerpc/pgtable-4k.h
@@ -10,10 +10,12 @@
 #define PUD_INDEX_SIZE  7
 #define PGD_INDEX_SIZE  9
 
+#ifndef __ASSEMBLY__
 #define PTE_TABLE_SIZE  (sizeof(pte_t) << PTE_INDEX_SIZE)
 #define PMD_TABLE_SIZE  (sizeof(pmd_t) << PMD_INDEX_SIZE)
 #define PUD_TABLE_SIZE  (sizeof(pud_t) << PUD_INDEX_SIZE)
 #define PGD_TABLE_SIZE  (sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif  /* __ASSEMBLY__ */
 
 #define PTRS_PER_PTE    (1 << PTE_INDEX_SIZE)
 #define PTRS_PER_PMD    (1 << PMD_INDEX_SIZE)
diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h
index 33ae9018fe72..bd54b772fbc6 100644
--- a/include/asm-powerpc/pgtable-64k.h
+++ b/include/asm-powerpc/pgtable-64k.h
@@ -9,9 +9,11 @@
 #define PUD_INDEX_SIZE  0
 #define PGD_INDEX_SIZE  4
 
+#ifndef __ASSEMBLY__
 #define PTE_TABLE_SIZE  (sizeof(real_pte_t) << PTE_INDEX_SIZE)
 #define PMD_TABLE_SIZE  (sizeof(pmd_t) << PMD_INDEX_SIZE)
 #define PGD_TABLE_SIZE  (sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif  /* __ASSEMBLY__ */
 
 #define PTRS_PER_PTE    (1 << PTE_INDEX_SIZE)
 #define PTRS_PER_PMD    (1 << PMD_INDEX_SIZE)
diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h
index 65325721446d..2dbd4e7884fa 100644
--- a/include/asm-powerpc/ppc_asm.h
+++ b/include/asm-powerpc/ppc_asm.h
@@ -155,6 +155,20 @@ name: \
         .type GLUE(.,name),@function; \
 GLUE(.,name):
 
+#define _INIT_GLOBAL(name) \
+        .section ".text.init.refok"; \
+        .align 2 ; \
+        .globl name; \
+        .globl GLUE(.,name); \
+        .section ".opd","aw"; \
+name: \
+        .quad GLUE(.,name); \
+        .quad .TOC.@tocbase; \
+        .quad 0; \
+        .previous; \
+        .type GLUE(.,name),@function; \
+GLUE(.,name):
+
 #define _KPROBE(name) \
         .section ".kprobes.text","a"; \
         .align 2 ; \
@@ -195,6 +209,10 @@ GLUE(.,name):
 
 #else /* 32-bit */
 
+#define _ENTRY(n)       \
+        .globl n;       \
+n:
+
 #define _GLOBAL(n)      \
         .text;          \
         .stabs __stringify(n:F-1),N_FUN,0,0,n;\
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
index e28b10805159..dba7c948189d 100644
--- a/include/asm-powerpc/processor.h
+++ b/include/asm-powerpc/processor.h
@@ -145,9 +145,9 @@ struct thread_struct {
         unsigned long   dabr;           /* Data address breakpoint register */
 #ifdef CONFIG_ALTIVEC
         /* Complete AltiVec register set */
-        vector128       vr[32] __attribute((aligned(16)));
+        vector128       vr[32] __attribute__((aligned(16)));
         /* AltiVec status */
-        vector128       vscr __attribute((aligned(16)));
+        vector128       vscr __attribute__((aligned(16)));
         unsigned long   vrsave;
         int             used_vr;        /* set if process has used altivec */
 #endif /* CONFIG_ALTIVEC */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 672083787a1d..925e2d384bb3 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -24,7 +24,7 @@
 #define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
 #define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
 
-#define of_compat_cmp(s1, s2, l)        strncasecmp((s1), (s2), (l))
+#define of_compat_cmp(s1, s2, l)        strcasecmp((s1), (s2))
 #define of_prop_cmp(s1, s2)             strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)             strcasecmp((s1), (s2))
 
@@ -145,7 +145,6 @@ extern void of_detach_node(struct device_node *);
 extern void finish_device_tree(void);
 extern void unflatten_device_tree(void);
 extern void early_init_devtree(void *);
-#define device_is_compatible(d, c)      of_device_is_compatible((d), (c))
 extern int machine_is_compatible(const char *compat);
 extern void print_properties(struct device_node *node);
 extern int prom_n_intr_cells(struct device_node* np);
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index a6f3f5ee7ca7..f577a16c6728 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -229,6 +229,9 @@ enum lv1_result {
         LV1_INVALID_CLASS_ID            = -21,
         LV1_CONSTRAINT_NOT_SATISFIED    = -22,
         LV1_ALIGNMENT_ERROR             = -23,
+        LV1_HARDWARE_ERROR              = -24,
+        LV1_INVALID_DATA_FORMAT         = -25,
+        LV1_INVALID_OPERATION           = -26,
         LV1_INTERNAL_ERROR              = -32768,
 };
 
@@ -284,6 +287,12 @@ static inline const char* ps3_result(int result)
                 return "LV1_CONSTRAINT_NOT_SATISFIED (-22)";
         case LV1_ALIGNMENT_ERROR:
                 return "LV1_ALIGNMENT_ERROR (-23)";
+        case LV1_HARDWARE_ERROR:
+                return "LV1_HARDWARE_ERROR (-24)";
+        case LV1_INVALID_DATA_FORMAT:
+                return "LV1_INVALID_DATA_FORMAT (-25)";
+        case LV1_INVALID_OPERATION:
+                return "LV1_INVALID_OPERATION (-26)";
         case LV1_INTERNAL_ERROR:
                 return "LV1_INTERNAL_ERROR (-32768)";
         default:
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index 9d304b1f1608..0dabe46a29d2 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -32,10 +32,13 @@
 extern void qe_reset(void);
 extern int par_io_init(struct device_node *np);
 extern int par_io_of_config(struct device_node *np);
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+                             int assignment, int has_irq);
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
 
 /* QE internal API */
 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-void qe_setbrg(u32 brg, u32 rate);
+void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned long qe_muram_alloc(int size, int align);
@@ -46,14 +49,28 @@ void *qe_muram_addr(unsigned long offset);
 
 /* Buffer descriptors */
 struct qe_bd {
-        u16 status;
-        u16 length;
-        u32 buf;
+        __be16 status;
+        __be16 length;
+        __be32 buf;
 } __attribute__ ((packed));
 
 #define BD_STATUS_MASK  0xffff0000
 #define BD_LENGTH_MASK  0x0000ffff
 
+#define BD_SC_EMPTY     0x8000  /* Receive is empty */
+#define BD_SC_READY     0x8000  /* Transmit is ready */
+#define BD_SC_WRAP      0x2000  /* Last buffer descriptor */
+#define BD_SC_INTRPT    0x1000  /* Interrupt on change */
+#define BD_SC_LAST      0x0800  /* Last buffer in frame */
+#define BD_SC_CM        0x0200  /* Continous mode */
+#define BD_SC_ID        0x0100  /* Rec'd too many idles */
+#define BD_SC_P         0x0100  /* xmt preamble */
+#define BD_SC_BR        0x0020  /* Break received */
+#define BD_SC_FR        0x0010  /* Framing error */
+#define BD_SC_PR        0x0008  /* Parity error */
+#define BD_SC_OV        0x0002  /* Overrun */
+#define BD_SC_CD        0x0001  /* ?? */
+
 /* Alignment */
 #define QE_INTR_TABLE_ALIGN     16      /* ??? */
 #define QE_ALIGNMENT_OF_BD      8
@@ -266,15 +283,12 @@ enum qe_clock {
 /* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
 #define QE_CR_PROTOCOL_UNSPECIFIED      0x00    /* For all other protocols */
 #define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_QMC              0x02
+#define QE_CR_PROTOCOL_UART             0x04
 #define QE_CR_PROTOCOL_ATM_POS          0x0A
 #define QE_CR_PROTOCOL_ETHERNET         0x0C
 #define QE_CR_PROTOCOL_L2_SWITCH        0x0D
 
-/* BMR byte order */
-#define QE_BMR_BYTE_ORDER_BO_PPC        0x08    /* powerpc little endian */
-#define QE_BMR_BYTE_ORDER_BO_MOT        0x10    /* motorola big endian */
-#define QE_BMR_BYTE_ORDER_BO_MAX        0x18
-
 /* BRG configuration register */
 #define QE_BRGC_ENABLE          0x00010000
 #define QE_BRGC_DIVISOR_SHIFT   1
@@ -321,41 +335,41 @@ enum qe_clock {
 #define UPGCR_ADDR      0x10000000      /* Master MPHY Addr multiplexing */
 #define UPGCR_DIAG      0x01000000      /* Diagnostic mode */
 
-/* UCC */
+/* UCC GUEMR register */
 #define UCC_GUEMR_MODE_MASK_RX  0x02
-#define UCC_GUEMR_MODE_MASK_TX  0x01
 #define UCC_GUEMR_MODE_FAST_RX  0x02
-#define UCC_GUEMR_MODE_FAST_TX  0x01
 #define UCC_GUEMR_MODE_SLOW_RX  0x00
+#define UCC_GUEMR_MODE_MASK_TX  0x01
+#define UCC_GUEMR_MODE_FAST_TX  0x01
 #define UCC_GUEMR_MODE_SLOW_TX  0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
 #define UCC_GUEMR_SET_RESERVED3 0x10    /* Bit 3 in the guemr is reserved but
                                            must be set 1 */
 
 /* structure representing UCC SLOW parameter RAM */
 struct ucc_slow_pram {
-        u16 rbase;              /* RX BD base address */
-        u16 tbase;              /* TX BD base address */
-        u8 rfcr;                /* Rx function code */
-        u8 tfcr;                /* Tx function code */
-        u16 mrblr;              /* Rx buffer length */
-        u32 rstate;             /* Rx internal state */
-        u32 rptr;               /* Rx internal data pointer */
-        u16 rbptr;              /* rb BD Pointer */
-        u16 rcount;             /* Rx internal byte count */
-        u32 rtemp;              /* Rx temp */
-        u32 tstate;             /* Tx internal state */
-        u32 tptr;               /* Tx internal data pointer */
-        u16 tbptr;              /* Tx BD pointer */
-        u16 tcount;             /* Tx byte count */
-        u32 ttemp;              /* Tx temp */
-        u32 rcrc;               /* temp receive CRC */
-        u32 tcrc;               /* temp transmit CRC */
+        __be16 rbase;           /* RX BD base address */
+        __be16 tbase;           /* TX BD base address */
+        u8 rbmr;                /* RX bus mode register (same as CPM's RFCR) */
+        u8 tbmr;                /* TX bus mode register (same as CPM's TFCR) */
+        __be16 mrblr;           /* Rx buffer length */
+        __be32 rstate;          /* Rx internal state */
+        __be32 rptr;            /* Rx internal data pointer */
+        __be16 rbptr;           /* rb BD Pointer */
+        __be16 rcount;          /* Rx internal byte count */
+        __be32 rtemp;           /* Rx temp */
+        __be32 tstate;          /* Tx internal state */
+        __be32 tptr;            /* Tx internal data pointer */
+        __be16 tbptr;           /* Tx BD pointer */
+        __be16 tcount;          /* Tx byte count */
+        __be32 ttemp;           /* Tx temp */
+        __be32 rcrc;            /* temp receive CRC */
+        __be32 tcrc;            /* temp transmit CRC */
 } __attribute__ ((packed));
 
 /* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_CRC16           0x00004000
-#define UCC_SLOW_GUMR_H_CRC16CCITT      0x00000000
-#define UCC_SLOW_GUMR_H_CRC32CCITT      0x00008000
+#define UCC_SLOW_GUMR_H_SAM_QMC         0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM        0x00008000
 #define UCC_SLOW_GUMR_H_REVD            0x00002000
 #define UCC_SLOW_GUMR_H_TRX             0x00001000
 #define UCC_SLOW_GUMR_H_TTX             0x00000800
@@ -375,9 +389,33 @@ struct ucc_slow_pram {
 #define UCC_SLOW_GUMR_L_TCI             0x10000000
 #define UCC_SLOW_GUMR_L_RINV            0x02000000
 #define UCC_SLOW_GUMR_L_TINV            0x01000000
-#define UCC_SLOW_GUMR_L_TEND            0x00020000
+#define UCC_SLOW_GUMR_L_TEND            0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK       0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32         0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16         0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8          0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1          0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK       0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32         0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16         0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8          0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1          0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI       0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ        0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI       0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ        0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK       0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE         0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO       0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP       0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM       0x00000000
 #define UCC_SLOW_GUMR_L_ENR             0x00000020
 #define UCC_SLOW_GUMR_L_ENT             0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK       0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC     0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC      0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART       0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC        0x00000002
 
 /* General UCC FAST Mode Register */
 #define UCC_FAST_GUMR_TCI       0x20000000
@@ -394,53 +432,111 @@ struct ucc_slow_pram {
 #define UCC_FAST_GUMR_ENR       0x00000020
 #define UCC_FAST_GUMR_ENT       0x00000010
 
-/* Slow UCC Event Register (UCCE) */
-#define UCC_SLOW_UCCE_GLR       0x1000
-#define UCC_SLOW_UCCE_GLT       0x0800
-#define UCC_SLOW_UCCE_DCC       0x0400
-#define UCC_SLOW_UCCE_FLG       0x0200
-#define UCC_SLOW_UCCE_AB        0x0200
-#define UCC_SLOW_UCCE_IDLE      0x0100
-#define UCC_SLOW_UCCE_GRA       0x0080
-#define UCC_SLOW_UCCE_TXE       0x0010
-#define UCC_SLOW_UCCE_RXF       0x0008
-#define UCC_SLOW_UCCE_CCR       0x0008
-#define UCC_SLOW_UCCE_RCH       0x0008
-#define UCC_SLOW_UCCE_BSY       0x0004
-#define UCC_SLOW_UCCE_TXB       0x0002
-#define UCC_SLOW_UCCE_TX        0x0002
-#define UCC_SLOW_UCCE_RX        0x0001
-#define UCC_SLOW_UCCE_GOV       0x0001
-#define UCC_SLOW_UCCE_GUN       0x0002
-#define UCC_SLOW_UCCE_GINT      0x0004
-#define UCC_SLOW_UCCE_IQOV      0x0008
-
-#define UCC_SLOW_UCCE_HDLC_SET  (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-                UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
-                UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_ENET_SET  (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-                UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
-#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-                UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
-                UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_UART_SET  (UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
-                UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
-                UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_QMC_SET   (UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
-                UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
-
-#define UCC_SLOW_UCCE_OTHER     (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
-                UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
-                UCC_SLOW_UCCE_GLR)
-
-#define UCC_SLOW_INTR_TX        UCC_SLOW_UCCE_TXB
-#define UCC_SLOW_INTR_RX        (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
-#define UCC_SLOW_INTR           (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB        0x0200
+#define UCC_UART_UCCE_IDLE      0x0100
+#define UCC_UART_UCCE_GRA       0x0080
+#define UCC_UART_UCCE_BRKE      0x0040
+#define UCC_UART_UCCE_BRKS      0x0020
+#define UCC_UART_UCCE_CCR       0x0008
+#define UCC_UART_UCCE_BSY       0x0004
+#define UCC_UART_UCCE_TX        0x0002
+#define UCC_UART_UCCE_RX        0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR       0x1000
+#define UCC_HDLC_UCCE_GLT       0x0800
+#define UCC_HDLC_UCCE_IDLE      0x0100
+#define UCC_HDLC_UCCE_BRKE      0x0040
+#define UCC_HDLC_UCCE_BRKS      0x0020
+#define UCC_HDLC_UCCE_TXE       0x0010
+#define UCC_HDLC_UCCE_RXF       0x0008
+#define UCC_HDLC_UCCE_BSY       0x0004
+#define UCC_HDLC_UCCE_TXB       0x0002
+#define UCC_HDLC_UCCE_RXB       0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA     0x0080
+#define UCC_BISYNC_UCCE_TXE     0x0010
+#define UCC_BISYNC_UCCE_RCH     0x0008
+#define UCC_BISYNC_UCCE_BSY     0x0004
+#define UCC_BISYNC_UCCE_TXB     0x0002
+#define UCC_BISYNC_UCCE_RXB     0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD       0x80000000
+#define UCC_GETH_UCCE_SCAR      0x40000000
+#define UCC_GETH_UCCE_GRA       0x20000000
+#define UCC_GETH_UCCE_CBPR      0x10000000
+#define UCC_GETH_UCCE_BSY       0x08000000
+#define UCC_GETH_UCCE_RXC       0x04000000
+#define UCC_GETH_UCCE_TXC       0x02000000
+#define UCC_GETH_UCCE_TXE       0x01000000
+#define UCC_GETH_UCCE_TXB7      0x00800000
+#define UCC_GETH_UCCE_TXB6      0x00400000
+#define UCC_GETH_UCCE_TXB5      0x00200000
+#define UCC_GETH_UCCE_TXB4      0x00100000
+#define UCC_GETH_UCCE_TXB3      0x00080000
+#define UCC_GETH_UCCE_TXB2      0x00040000
+#define UCC_GETH_UCCE_TXB1      0x00020000
+#define UCC_GETH_UCCE_TXB0      0x00010000
+#define UCC_GETH_UCCE_RXB7      0x00008000
+#define UCC_GETH_UCCE_RXB6      0x00004000
+#define UCC_GETH_UCCE_RXB5      0x00002000
+#define UCC_GETH_UCCE_RXB4      0x00001000
+#define UCC_GETH_UCCE_RXB3      0x00000800
+#define UCC_GETH_UCCE_RXB2      0x00000400
+#define UCC_GETH_UCCE_RXB1      0x00000200
+#define UCC_GETH_UCCE_RXB0      0x00000100
+#define UCC_GETH_UCCE_RXF7      0x00000080
+#define UCC_GETH_UCCE_RXF6      0x00000040
+#define UCC_GETH_UCCE_RXF5      0x00000020
+#define UCC_GETH_UCCE_RXF4      0x00000010
+#define UCC_GETH_UCCE_RXF3      0x00000008
+#define UCC_GETH_UCCE_RXF2      0x00000004
+#define UCC_GETH_UCCE_RXF1      0x00000002
+#define UCC_GETH_UCCE_RXF0      0x00000001
+
+/* UPSMR, when used as a UART */
+#define UCC_UART_UPSMR_FLC              0x8000
+#define UCC_UART_UPSMR_SL               0x4000
+#define UCC_UART_UPSMR_CL_MASK          0x3000
+#define UCC_UART_UPSMR_CL_8             0x3000
+#define UCC_UART_UPSMR_CL_7             0x2000
+#define UCC_UART_UPSMR_CL_6             0x1000
+#define UCC_UART_UPSMR_CL_5             0x0000
+#define UCC_UART_UPSMR_UM_MASK          0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL        0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI     0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI    0x0c00
+#define UCC_UART_UPSMR_FRZ              0x0200
+#define UCC_UART_UPSMR_RZS              0x0100
+#define UCC_UART_UPSMR_SYN              0x0080
+#define UCC_UART_UPSMR_DRT              0x0040
+#define UCC_UART_UPSMR_PEN              0x0010
+#define UCC_UART_UPSMR_RPM_MASK         0x000c
+#define UCC_UART_UPSMR_RPM_ODD          0x0000
+#define UCC_UART_UPSMR_RPM_LOW          0x0004
+#define UCC_UART_UPSMR_RPM_EVEN         0x0008
+#define UCC_UART_UPSMR_RPM_HIGH         0x000C
+#define UCC_UART_UPSMR_TPM_MASK         0x0003
+#define UCC_UART_UPSMR_TPM_ODD          0x0000
+#define UCC_UART_UPSMR_TPM_LOW          0x0001
+#define UCC_UART_UPSMR_TPM_EVEN         0x0002
+#define UCC_UART_UPSMR_TPM_HIGH         0x0003
 
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD    0x8000
 #define UCC_FAST_TOD    0x8000
 
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL             0x20
+#define UCC_BMR_BO_BE           0x10
+#define UCC_BMR_CETM            0x04
+#define UCC_BMR_DTB             0x02
+#define UCC_BMR_BDB             0x01
+
 /* Function code masks */
 #define FC_GBL                          0x20
 #define FC_DTB_LCL                      0x02
diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h
index e386fb7e44b0..a779b2c9eaf1 100644
--- a/include/asm-powerpc/qe_ic.h
+++ b/include/asm-powerpc/qe_ic.h
@@ -56,9 +56,75 @@ enum qe_ic_grp_id {
         QE_IC_GRP_RISCB         /* QE interrupt controller RISC group B */
 };
 
-void qe_ic_init(struct device_node *node, unsigned int flags);
+void qe_ic_init(struct device_node *node, unsigned int flags,
+                void (*low_handler)(unsigned int irq, struct irq_desc *desc),
+                void (*high_handler)(unsigned int irq, struct irq_desc *desc));
 void qe_ic_set_highest_priority(unsigned int virq, int high);
 int qe_ic_set_priority(unsigned int virq, unsigned int priority);
 int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
 
+struct qe_ic;
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
+
+static inline void qe_ic_cascade_low_ipic(unsigned int irq,
+                                          struct irq_desc *desc)
+{
+        struct qe_ic *qe_ic = desc->handler_data;
+        unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+        if (cascade_irq != NO_IRQ)
+                generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_high_ipic(unsigned int irq,
+                                           struct irq_desc *desc)
+{
+        struct qe_ic *qe_ic = desc->handler_data;
+        unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+        if (cascade_irq != NO_IRQ)
+                generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_low_mpic(unsigned int irq,
+                                          struct irq_desc *desc)
+{
+        struct qe_ic *qe_ic = desc->handler_data;
+        unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+        if (cascade_irq != NO_IRQ)
+                generic_handle_irq(cascade_irq);
+
+        desc->chip->eoi(irq);
+}
+
+static inline void qe_ic_cascade_high_mpic(unsigned int irq,
+                                           struct irq_desc *desc)
+{
+        struct qe_ic *qe_ic = desc->handler_data;
+        unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+        if (cascade_irq != NO_IRQ)
+                generic_handle_irq(cascade_irq);
+
+        desc->chip->eoi(irq);
+}
+
+static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
+                                            struct irq_desc *desc)
+{
+        struct qe_ic *qe_ic = desc->handler_data;
+        unsigned int cascade_irq;
+
+        cascade_irq = qe_ic_get_high_irq(qe_ic);
+        if (cascade_irq == NO_IRQ)
+                cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+        if (cascade_irq != NO_IRQ)
+                generic_handle_irq(cascade_irq);
+
+        desc->chip->eoi(irq);
+}
+
 #endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index 281011e953ec..e775ff1ca413 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -102,12 +102,8 @@
 #else /* 32-bit */
 /* Default MSR for kernel mode. */
 #ifndef MSR_KERNEL      /* reg_booke.h also defines this */
-#ifdef CONFIG_APUS_FAST_EXCEPT
-#define MSR_KERNEL      (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
-#else
 #define MSR_KERNEL      (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
 #endif
-#endif
 
 #define MSR_USER        (MSR_KERNEL|MSR_PR|MSR_EE)
 #endif
@@ -518,21 +514,47 @@
 #define   PA6T_MMCR1_ES4        0x0000000000ff0000UL
 #define   PA6T_MMCR1_ES5        0x00000000ff000000UL
 
-#define SPRN_PA6T_SIAR  780
-#define SPRN_PA6T_UPMC0 771
-#define SPRN_PA6T_UPMC1 772
+#define SPRN_PA6T_UPMC0 771     /* User PerfMon Counter 0 */
+#define SPRN_PA6T_UPMC1 772     /* ... */
 #define SPRN_PA6T_UPMC2 773
 #define SPRN_PA6T_UPMC3 774
 #define SPRN_PA6T_UPMC4 775
 #define SPRN_PA6T_UPMC5 776
-#define SPRN_PA6T_UMMCR0 779
-#define SPRN_PA6T_UMMCR1 782
-#define SPRN_PA6T_PMC0  787
-#define SPRN_PA6T_PMC1  788
-#define SPRN_PA6T_PMC2  789
-#define SPRN_PA6T_PMC3  790
-#define SPRN_PA6T_PMC4  791
-#define SPRN_PA6T_PMC5  792
+#define SPRN_PA6T_UMMCR0 779    /* User Monitor Mode Control Register 0 */
+#define SPRN_PA6T_SIAR  780     /* Sampled Instruction Address */
+#define SPRN_PA6T_UMMCR1 782    /* User Monitor Mode Control Register 1 */
+#define SPRN_PA6T_SIER  785     /* Sampled Instruction Event Register */
+#define SPRN_PA6T_PMC0  787
+#define SPRN_PA6T_PMC1  788
+#define SPRN_PA6T_PMC2  789
+#define SPRN_PA6T_PMC3  790
+#define SPRN_PA6T_PMC4  791
+#define SPRN_PA6T_PMC5  792
+#define SPRN_PA6T_TSR0  793     /* Timestamp Register 0 */
+#define SPRN_PA6T_TSR1  794     /* Timestamp Register 1 */
+#define SPRN_PA6T_TSR2  799     /* Timestamp Register 2 */
+#define SPRN_PA6T_TSR3  784     /* Timestamp Register 3 */
+
+#define SPRN_PA6T_IER   981     /* Icache Error Register */
+#define SPRN_PA6T_DER   982     /* Dcache Error Register */
+#define SPRN_PA6T_BER   862     /* BIU Error Address Register */
+#define SPRN_PA6T_MER   849     /* MMU Error Register */
+
+#define SPRN_PA6T_IMA0  880     /* Instruction Match Array 0 */
+#define SPRN_PA6T_IMA1  881     /* ... */
+#define SPRN_PA6T_IMA2  882
+#define SPRN_PA6T_IMA3  883
+#define SPRN_PA6T_IMA4  884
+#define SPRN_PA6T_IMA5  885
+#define SPRN_PA6T_IMA6  886
+#define SPRN_PA6T_IMA7  887
+#define SPRN_PA6T_IMA8  888
+#define SPRN_PA6T_IMA9  889
+#define SPRN_PA6T_BTCR  978     /* Breakpoint and Tagging Control Register */
+#define SPRN_PA6T_IMAAT 979     /* Instruction Match Array Action Table */
+#define SPRN_PA6T_PCCR  1019    /* Power Counter Control Register */
+#define SPRN_PA6T_RPCCR 1021    /* Retire PC Trace Control Register */
+
 
 #else /* 32-bit */
 #define SPRN_MMCR0      952     /* Monitor Mode Control Register 0 */
diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h
index e929145e1e46..cefc14728cc5 100644
--- a/include/asm-powerpc/rwsem.h
+++ b/include/asm-powerpc/rwsem.h
@@ -1,6 +1,10 @@
 #ifndef _ASM_POWERPC_RWSEM_H
 #define _ASM_POWERPC_RWSEM_H
 
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
 #ifdef __KERNEL__
 
 /*
diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h
index d037f50580e2..19102bfc14ca 100644
--- a/include/asm-powerpc/smp.h
+++ b/include/asm-powerpc/smp.h
@@ -45,7 +45,7 @@ void generic_mach_cpu_die(void);
 #endif
 
 #ifdef CONFIG_PPC64
-#define raw_smp_processor_id()  (get_paca()->paca_index)
+#define raw_smp_processor_id()  (local_paca->paca_index)
 #define hard_smp_processor_id() (get_paca()->hw_cpu_id)
 #else
 /* 32-bit */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 5bde3980bf49..b1accce77bb5 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -238,19 +238,14 @@ extern long spu_sys_callback(struct spu_syscall_block *s);
 
 /* syscalls implemented in spufs */
 struct file;
-extern struct spufs_calls {
-        asmlinkage long (*create_thread)(const char __user *name,
+struct spufs_calls {
+        long (*create_thread)(const char __user *name,
                                         unsigned int flags, mode_t mode,
                                         struct file *neighbor);
-        asmlinkage long (*spu_run)(struct file *filp, __u32 __user *unpc,
+        long (*spu_run)(struct file *filp, __u32 __user *unpc,
                                                 __u32 __user *ustatus);
-        struct module *owner;
-} spufs_calls;
-
-/* coredump calls implemented in spufs */
-struct spu_coredump_calls {
-        asmlinkage int (*arch_notes_size)(void);
-        asmlinkage void (*arch_write_notes)(struct file *file);
+        int (*coredump_extra_notes_size)(void);
+        int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset);
         struct module *owner;
 };
 
@@ -274,21 +269,8 @@ struct spu_coredump_calls {
 #define SPU_CREATE_FLAG_ALL             0x003f /* mask of all valid flags */
 
 
-#ifdef CONFIG_SPU_FS_MODULE
 int register_spu_syscalls(struct spufs_calls *calls);
 void unregister_spu_syscalls(struct spufs_calls *calls);
-#else
-static inline int register_spu_syscalls(struct spufs_calls *calls)
-{
-        return 0;
-}
-static inline void unregister_spu_syscalls(struct spufs_calls *calls)
-{
-}
-#endif /* MODULE */
-
-int register_arch_coredump_calls(struct spu_coredump_calls *calls);
-void unregister_arch_coredump_calls(struct spu_coredump_calls *calls);
 
 int spu_add_sysdev_attr(struct sysdev_attribute *attr);
 void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 41520b7a7b76..d10e99bf5001 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -189,6 +189,9 @@ extern int mem_init_done;	/* set on boot once kmalloc can be called */
 extern unsigned long memory_limit;
 extern unsigned long klimit;
 
+extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
 extern int powersave_nap;       /* set if nap mode can be used in idle loop */
 
 /*
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
index c104c15c6625..f05895522f7f 100644
--- a/include/asm-powerpc/time.h
+++ b/include/asm-powerpc/time.h
@@ -179,7 +179,7 @@ static inline unsigned int get_dec(void)
 static inline void set_dec(int val)
 {
 #if defined(CONFIG_40x)
-        return;         /* Have to let it auto-reload */
+        mtspr(SPRN_PIT, val);
 #elif defined(CONFIG_8xx_CPU6)
         set_dec_cpu6(val);
 #else
@@ -245,6 +245,7 @@ extern void snapshot_timebases(void);
 #define snapshot_timebases()                    do { } while (0)
 #endif
 
+extern void secondary_cpu_time_init(void);
 extern void iSeries_time_init_early(void);
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/tlb.h b/include/asm-powerpc/tlb.h
index 66714042e438..e20ff7541f36 100644
--- a/include/asm-powerpc/tlb.h
+++ b/include/asm-powerpc/tlb.h
@@ -23,6 +23,8 @@
 #include <asm/mmu.h>
 #endif
 
+#include <linux/pagemap.h>
+
 struct mmu_gather;
 
 #define tlb_start_vma(tlb, vma) do { } while (0)
diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h
index 99a0439baa50..a022f806bb21 100644
--- a/include/asm-powerpc/tlbflush.h
+++ b/include/asm-powerpc/tlbflush.h
@@ -97,6 +97,7 @@ struct ppc64_tlb_batch {
         real_pte_t              pte[PPC64_TLB_BATCH_NR];
         unsigned long           vaddr[PPC64_TLB_BATCH_NR];
         unsigned int            psize;
+        int                     ssize;
 };
 DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
@@ -127,7 +128,7 @@ static inline void arch_leave_lazy_mmu_mode(void)
 
 
 extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
-                            int local);
+                            int ssize, int local);
 extern void flush_hash_range(unsigned long number, int local);
 
 
diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h
index 3b363757a2bb..a584341c87e3 100644
--- a/include/asm-powerpc/types.h
+++ b/include/asm-powerpc/types.h
@@ -48,7 +48,7 @@ typedef unsigned long long __u64;
 
 typedef struct {
         __u32 u[4];
-} __attribute((aligned(16))) __vector128;
+} __attribute__((aligned(16))) __vector128;
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
index afe3076bdc03..46b09ba6bead 100644
--- a/include/asm-powerpc/ucc.h
+++ b/include/asm-powerpc/ucc.h
@@ -25,58 +25,38 @@
 /* Slow or fast type for UCCs.
 */
 enum ucc_speed_type {
-        UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
-};
-
-/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
-*/
-enum ucc_pram_initial_offset {
-        UCC_PRAM_OFFSET_UCC1 = 0x8400,
-        UCC_PRAM_OFFSET_UCC2 = 0x8500,
-        UCC_PRAM_OFFSET_UCC3 = 0x8600,
-        UCC_PRAM_OFFSET_UCC4 = 0x9000,
-        UCC_PRAM_OFFSET_UCC5 = 0x8000,
-        UCC_PRAM_OFFSET_UCC6 = 0x8100,
-        UCC_PRAM_OFFSET_UCC7 = 0x8200,
-        UCC_PRAM_OFFSET_UCC8 = 0x8300
+        UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+        UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
 };
 
 /* ucc_set_type
  * Sets UCC to slow or fast mode.
  *
  * ucc_num - (In) number of UCC (0-7).
- * regs    - (In) pointer to registers base for the UCC.
  * speed   - (In) slow or fast mode for UCC.
  */
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
-                 enum ucc_speed_type speed);
-
-/* ucc_init_guemr
- * Init the Guemr register.
- *
- * regs - (In) pointer to registers base for the UCC.
- */
-int ucc_init_guemr(struct ucc_common *regs);
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
 
-int ucc_set_qe_mux_mii_mng(int ucc_num);
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
 
-int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode);
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+        enum comm_dir mode);
 
-int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
 
 /* QE MUX clock routing for UCC
 */
-static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
 {
         return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
 }
 
-static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
 {
         return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
 }
 
-static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
 {
         return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
 }
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
index fdaac9d762bb..0980e6ad335b 100644
--- a/include/asm-powerpc/ucc_slow.h
+++ b/include/asm-powerpc/ucc_slow.h
@@ -148,9 +148,10 @@ enum ucc_slow_diag_mode {
 
 struct ucc_slow_info {
         int ucc_num;
+        int protocol;                   /* QE_CR_PROTOCOL_xxx */
         enum qe_clock rx_clock;
         enum qe_clock tx_clock;
-        u32 regs;
+        phys_addr_t regs;
         int irq;
         u16 uccm_mask;
         int data_mem_part;
@@ -186,7 +187,7 @@ struct ucc_slow_info {
 
 struct ucc_slow_private {
         struct ucc_slow_info *us_info;
-        struct ucc_slow *us_regs;       /* a pointer to memory map of UCC regs */
+        struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
         struct ucc_slow_pram *us_pram;  /* a pointer to the parameter RAM */
         u32 us_pram_offset;
         int enabled_tx;         /* Whether channel is enabled for Tx (ENT) */
@@ -277,12 +278,12 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
  */
 void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
 
-/* ucc_slow_restart_x
+/* ucc_slow_restart_tx
  * Restarts transmitting on a specified slow UCC.
  *
  * uccs - (In) pointer to the slow UCC structure.
  */
-void ucc_slow_restart_x(struct ucc_slow_private * uccs);
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
 
 u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
 
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
index ce9d82fb7b68..a9e0b0ebcb0f 100644
--- a/include/asm-powerpc/udbg.h
+++ b/include/asm-powerpc/udbg.h
@@ -48,6 +48,7 @@ extern void __init udbg_init_rtas_console(void);
 extern void __init udbg_init_debug_beat(void);
 extern void __init udbg_init_btext(void);
 extern void __init udbg_init_44x_as1(void);
+extern void __init udbg_init_cpm(void);
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_UDBG_H */
diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h
index 3a0975e2adad..9204c15839c5 100644
--- a/include/asm-powerpc/vio.h
+++ b/include/asm-powerpc/vio.h
@@ -53,18 +53,12 @@ struct vio_dev {
 };
 
 struct vio_driver {
-        struct list_head node;
         const struct vio_device_id *id_table;
         int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
         int (*remove)(struct vio_dev *dev);
-        void (*shutdown)(struct vio_dev *dev);
-        unsigned long driver_data;
         struct device_driver driver;
 };
 
-extern struct dma_mapping_ops vio_dma_ops;
-extern struct bus_type vio_bus_type;
-
 extern int vio_register_driver(struct vio_driver *drv);
 extern void vio_unregister_driver(struct vio_driver *drv);
 
diff --git a/include/asm-powerpc/xilinx_intc.h b/include/asm-powerpc/xilinx_intc.h
new file mode 100644
index 000000000000..343612f8fece
--- /dev/null
+++ b/include/asm-powerpc/xilinx_intc.h
@@ -0,0 +1,20 @@
+/*
+ * Xilinx intc external definitions
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_XILINX_INTC_H
+#define _ASM_POWERPC_XILINX_INTC_H
+
+#ifdef __KERNEL__
+
+extern void __init xilinx_intc_init_tree(void);
+extern unsigned int xilinx_intc_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_XILINX_INTC_H */
diff --git a/include/asm-ppc/amigahw.h b/include/asm-ppc/amigahw.h
deleted file mode 100644
index 90fd1274d727..000000000000
--- a/include/asm-ppc/amigahw.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifdef __KERNEL__
-#ifndef __ASMPPC_AMIGAHW_H
-#define __ASMPPC_AMIGAHW_H
-
-#include <asm-m68k/amigahw.h>
-
-#undef CHIP_PHYSADDR
-#ifdef CONFIG_APUS_FAST_EXCEPT
-#define CHIP_PHYSADDR      (0x000000)
-#else
-#define CHIP_PHYSADDR      (0x004000)
-#endif
-
-
-#endif /* __ASMPPC_AMIGAHW_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigaints.h b/include/asm-ppc/amigaints.h
deleted file mode 100644
index aa3ff6349e81..000000000000
--- a/include/asm-ppc/amigaints.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
-** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 10/2/92 by Greg Harp
-*/
-
-#ifdef __KERNEL__
-#ifndef _ASMm68k_AMIGAINTS_H_
-#define _ASMm68k_AMIGAINTS_H_
-
-/*
-** Amiga Interrupt sources.
-**
-*/
-
-#define AUTO_IRQS           (8)
-#define AMI_STD_IRQS        (14)
-#define CIA_IRQS            (5)
-#define AMI_IRQS            (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
-
-/* vertical blanking interrupt */
-#define IRQ_AMIGA_VERTB     0
-
-/* copper interrupt */
-#define IRQ_AMIGA_COPPER    1
-
-/* Audio interrupts */
-#define IRQ_AMIGA_AUD0      2
-#define IRQ_AMIGA_AUD1      3
-#define IRQ_AMIGA_AUD2      4
-#define IRQ_AMIGA_AUD3      5
-
-/* Blitter done interrupt */
-#define IRQ_AMIGA_BLIT      6
-
-/* floppy disk interrupts */
-#define IRQ_AMIGA_DSKSYN    7
-#define IRQ_AMIGA_DSKBLK    8
-
-/* builtin serial port interrupts */
-#define IRQ_AMIGA_RBF       9
-#define IRQ_AMIGA_TBE       10
-
-/* software interrupts */
-#define IRQ_AMIGA_SOFT      11
-
-/* interrupts from external hardware */
-#define IRQ_AMIGA_PORTS     12
-#define IRQ_AMIGA_EXTER     13
-
-/* CIA interrupt sources */
-#define IRQ_AMIGA_CIAA      14
-#define IRQ_AMIGA_CIAA_TA   14
-#define IRQ_AMIGA_CIAA_TB   15
-#define IRQ_AMIGA_CIAA_ALRM 16
-#define IRQ_AMIGA_CIAA_SP   17
-#define IRQ_AMIGA_CIAA_FLG  18
-#define IRQ_AMIGA_CIAB      19
-#define IRQ_AMIGA_CIAB_TA   19
-#define IRQ_AMIGA_CIAB_TB   20
-#define IRQ_AMIGA_CIAB_ALRM 21
-#define IRQ_AMIGA_CIAB_SP   22
-#define IRQ_AMIGA_CIAB_FLG  23
-
-/* auto-vector interrupts */
-#define IRQ_AMIGA_AUTO      24
-#define IRQ_AMIGA_AUTO_0    24 /* This is just a dummy */
-#define IRQ_AMIGA_AUTO_1    25
-#define IRQ_AMIGA_AUTO_2    26
-#define IRQ_AMIGA_AUTO_3    27
-#define IRQ_AMIGA_AUTO_4    28
-#define IRQ_AMIGA_AUTO_5    29
-#define IRQ_AMIGA_AUTO_6    30
-#define IRQ_AMIGA_AUTO_7    31
-
-#define IRQ_FLOPPY          IRQ_AMIGA_DSKBLK
-
-/* INTREQR masks */
-#define IRQ1_MASK   0x0007      /* INTREQR mask for IRQ 1 */
-#define IRQ2_MASK   0x0008      /* INTREQR mask for IRQ 2 */
-#define IRQ3_MASK   0x0070      /* INTREQR mask for IRQ 3 */
-#define IRQ4_MASK   0x0780      /* INTREQR mask for IRQ 4 */
-#define IRQ5_MASK   0x1800      /* INTREQR mask for IRQ 5 */
-#define IRQ6_MASK   0x2000      /* INTREQR mask for IRQ 6 */
-#define IRQ7_MASK   0x4000      /* INTREQR mask for IRQ 7 */
-
-#define IF_SETCLR   0x8000      /* set/clr bit */
-#define IF_INTEN    0x4000      /* master interrupt bit in INT* registers */
-#define IF_EXTER    0x2000      /* external level 6 and CIA B interrupt */
-#define IF_DSKSYN   0x1000      /* disk sync interrupt */
-#define IF_RBF      0x0800      /* serial receive buffer full interrupt */
-#define IF_AUD3     0x0400      /* audio channel 3 done interrupt */
-#define IF_AUD2     0x0200      /* audio channel 2 done interrupt */
-#define IF_AUD1     0x0100      /* audio channel 1 done interrupt */
-#define IF_AUD0     0x0080      /* audio channel 0 done interrupt */
-#define IF_BLIT     0x0040      /* blitter done interrupt */
-#define IF_VERTB    0x0020      /* vertical blanking interrupt */
-#define IF_COPER    0x0010      /* copper interrupt */
-#define IF_PORTS    0x0008      /* external level 2 and CIA A interrupt */
-#define IF_SOFT     0x0004      /* software initiated interrupt */
-#define IF_DSKBLK   0x0002      /* diskblock DMA finished */
-#define IF_TBE      0x0001      /* serial transmit buffer empty interrupt */
-
-extern void amiga_do_irq(int irq, struct pt_regs *fp);
-extern void amiga_do_irq_list(int irq, struct pt_regs *fp);
-
-/* CIA interrupt control register bits */
-
-#define CIA_ICR_TA      0x01
-#define CIA_ICR_TB      0x02
-#define CIA_ICR_ALRM    0x04
-#define CIA_ICR_SP      0x08
-#define CIA_ICR_FLG     0x10
-#define CIA_ICR_ALL     0x1f
-#define CIA_ICR_SETCLR  0x80
-
-/* to access the interrupt control registers of CIA's use only
-** these functions, they behave exactly like the amiga os routines
-*/
-
-extern struct ciabase ciaa_base, ciab_base;
-
-extern unsigned char cia_set_irq(unsigned int irq, int set);
-extern unsigned char cia_able_irq(unsigned int irq, int enable);
-
-#endif /* asm-m68k/amigaints.h */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigappc.h b/include/asm-ppc/amigappc.h
deleted file mode 100644
index 35114ce5135f..000000000000
--- a/include/asm-ppc/amigappc.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-** asm-ppc/amigappc.h -- This header defines some values and pointers for
-**                        the Phase 5 PowerUp card.
-**
-** Copyright 1997, 1998 by Phase5, Germany.
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License.  See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 7/22/97 by Jesper Skov
-*/
-
-#ifdef __KERNEL__
-#ifndef _M68K_AMIGAPPC_H
-#define _M68K_AMIGAPPC_H
-
-#ifndef __ASSEMBLY__
-
-/* #include <asm/system.h> */
-#define mb()  __asm__ __volatile__ ("sync" : : : "memory")
-
-#define APUS_WRITE(_a_, _v_)                            \
-do {                                                    \
-        (*((volatile unsigned char *)(_a_)) = (_v_));   \
-        mb();                                           \
-} while (0)
-
-#define APUS_READ(_a_, _v_)                             \
-do {                                                    \
-        (_v_) = (*((volatile unsigned char *)(_a_)));   \
-        mb();                                           \
-} while (0)
-#endif /* ndef __ASSEMBLY__ */
-
-/* Maybe add a [#ifdef WANT_ZTWOBASE] condition to amigahw.h? */
-#define zTwoBase (0x80000000)
-
-#define APUS_IPL_BASE           (zTwoBase + 0x00f60000)
-#define APUS_REG_RESET          (APUS_IPL_BASE + 0x00)
-#define APUS_REG_WAITSTATE      (APUS_IPL_BASE + 0x10)
-#define APUS_REG_SHADOW         (APUS_IPL_BASE + 0x18)
-#define APUS_REG_LOCK           (APUS_IPL_BASE + 0x20)
-#define APUS_REG_INT            (APUS_IPL_BASE + 0x28)
-#define APUS_IPL_EMU            (APUS_IPL_BASE + 0x30)
-#define APUS_INT_LVL            (APUS_IPL_BASE + 0x38)
-
-#define REGSHADOW_SETRESET      (0x80)
-#define REGSHADOW_SELFRESET     (0x40)
-
-#define REGLOCK_SETRESET        (0x80)
-#define REGLOCK_BLACKMAGICK1    (0x40)
-#define REGLOCK_BLACKMAGICK2    (0x20)
-#define REGLOCK_BLACKMAGICK3    (0x10)
-
-#define REGWAITSTATE_SETRESET   (0x80)
-#define REGWAITSTATE_PPCW       (0x08)
-#define REGWAITSTATE_PPCR       (0x04)
-
-#define REGRESET_SETRESET       (0x80)
-#define REGRESET_PPCRESET       (0x10)
-#define REGRESET_M68KRESET      (0x08)
-#define REGRESET_AMIGARESET     (0x04)
-#define REGRESET_AUXRESET       (0x02)
-#define REGRESET_SCSIRESET      (0x01)
-
-#define REGINT_SETRESET         (0x80)
-#define REGINT_ENABLEIPL        (0x02)
-#define REGINT_INTMASTER        (0x01)
-
-#define IPLEMU_SETRESET         (0x80)
-#define IPLEMU_DISABLEINT       (0x40)
-#define IPLEMU_IPL2             (0x20)
-#define IPLEMU_IPL1             (0x10)
-#define IPLEMU_IPL0             (0x08)
-#define IPLEMU_PPCIPL2          (0x04)
-#define IPLEMU_PPCIPL1          (0x02)
-#define IPLEMU_PPCIPL0          (0x01)
-#define IPLEMU_IPLMASK          (IPLEMU_PPCIPL2|IPLEMU_PPCIPL1|IPLEMU_PPCIPL0)
-
-#define INTLVL_SETRESET         (0x80)
-#define INTLVL_MASK             (0x7f)
-
-#endif /* _M68k_AMIGAPPC_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ans-lcd.h b/include/asm-ppc/ans-lcd.h
deleted file mode 100644
index d795b9fd2db6..000000000000
--- a/include/asm-ppc/ans-lcd.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _PPC_ANS_LCD_H
-#define _PPC_ANS_LCD_H
-
-#define ANSLCD_MINOR            156
-
-#define ANSLCD_CLEAR            0x01
-#define ANSLCD_SENDCTRL         0x02
-#define ANSLCD_SETSHORTDELAY    0x03
-#define ANSLCD_SETLONGDELAY     0x04
-
-#endif
diff --git a/include/asm-ppc/bootinfo.h b/include/asm-ppc/bootinfo.h
index 2ace4a74f263..f6ed77aee328 100644
--- a/include/asm-ppc/bootinfo.h
+++ b/include/asm-ppc/bootinfo.h
@@ -11,10 +11,6 @@
 
 #include <asm/page.h>
 
-#if defined(CONFIG_APUS) && !defined(__BOOTER__)
-#include <asm-m68k/bootinfo.h>
-#else
-
 struct bi_record {
         unsigned long tag;              /* tag ID */
         unsigned long size;             /* size of record (in bytes) */
@@ -44,7 +40,6 @@ bootinfo_addr(unsigned long offset)
         return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1,
                                           (1 << 20));
 }
-#endif /* CONFIG_APUS */
 
 
 #endif /* _PPC_BOOTINFO_H */
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 95d590423cf2..8f58231a8bc6 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -30,7 +30,7 @@
 #include <asm/mpc8xx.h>
 #elif defined(CONFIG_8260)
 #include <asm/mpc8260.h>
-#elif defined(CONFIG_APUS) || !defined(CONFIG_PCI)
+#elif !defined(CONFIG_PCI)
 #define _IO_BASE        0
 #define _ISA_MEM_BASE   0
 #define PCI_DRAM_OFFSET 0
@@ -145,24 +145,7 @@ static inline void writeb(__u8 b, volatile void __iomem *addr)
 }
 #endif
 
-#if defined(CONFIG_APUS)
-static inline __u16 readw(const volatile void __iomem *addr)
-{
-        return *(__force volatile __u16 *)(addr);
-}
-static inline __u32 readl(const volatile void __iomem *addr)
-{
-        return *(__force volatile __u32 *)(addr);
-}
-static inline void writew(__u16 b, volatile void __iomem *addr)
-{
-        *(__force volatile __u16 *)(addr) = b;
-}
-static inline void writel(__u32 b, volatile void __iomem *addr)
-{
-        *(__force volatile __u32 *)(addr) = b;
-}
-#elif defined (CONFIG_8260_PCI9)
+#if defined (CONFIG_8260_PCI9)
 /* Use macros if PCI9 workaround enabled */
 #define readw(addr) in_le16((volatile u16 *)(addr))
 #define readl(addr) in_le32((volatile u32 *)(addr))
@@ -185,7 +168,7 @@ static inline void writel(__u32 b, volatile void __iomem *addr)
 {
         out_le32(addr, b);
 }
-#endif /* CONFIG_APUS */
+#endif /* CONFIG_8260_PCI9 */
 
 #define readb_relaxed(addr) readb(addr)
 #define readw_relaxed(addr) readw(addr)
@@ -300,13 +283,7 @@ extern __inline__ void name(unsigned int val, unsigned int port) \
 }
 
 __do_out_asm(outb, "stbx")
-#ifdef CONFIG_APUS
-__do_in_asm(inb, "lbzx")
-__do_in_asm(inw, "lhz%U1%X1")
-__do_in_asm(inl, "lwz%U1%X1")
-__do_out_asm(outl,"stw%U0%X0")
-__do_out_asm(outw, "sth%U0%X0")
-#elif defined (CONFIG_8260_PCI9)
+#if defined (CONFIG_8260_PCI9)
 /* in asm cannot be defined if PCI9 workaround is used */
 #define inb(port)               in_8((port)+___IO_BASE)
 #define inw(port)               in_le16((port)+___IO_BASE)
@@ -371,7 +348,6 @@ extern void __iomem *ioremap64(unsigned long long address, unsigned long size);
 #define ioremap_nocache(addr, size)     ioremap((addr), (size))
 extern void iounmap(volatile void __iomem *addr);
 extern unsigned long iopa(unsigned long addr);
-extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
 extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
                              unsigned int size, int flags);
 
@@ -384,24 +360,16 @@ extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
  */
 extern inline unsigned long virt_to_bus(volatile void * address)
 {
-#ifndef CONFIG_APUS
         if (address == (void *)0)
                 return 0;
         return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
-#else
-        return iopa ((unsigned long) address);
-#endif
 }
 
 extern inline void * bus_to_virt(unsigned long address)
 {
-#ifndef CONFIG_APUS
         if (address == 0)
                 return NULL;
         return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE);
-#else
-        return (void*) mm_ptov (address);
-#endif
 }
 
 /*
@@ -410,20 +378,12 @@ extern inline void * bus_to_virt(unsigned long address)
  */
 extern inline unsigned long virt_to_phys(volatile void * address)
 {
-#ifndef CONFIG_APUS
         return (unsigned long) address - KERNELBASE;
-#else
-        return iopa ((unsigned long) address);
-#endif
 }
 
 extern inline void * phys_to_virt(unsigned long address)
 {
-#ifndef CONFIG_APUS
         return (void *) (address + KERNELBASE);
-#else
-        return (void*) mm_ptov (address);
-#endif
 }
 
 /*
@@ -553,4 +513,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
 #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
 #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
 
+#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
+#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
+
 #endif /* __KERNEL__ */
diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h
index 293a444a1d77..a20b499b0186 100644
--- a/include/asm-ppc/machdep.h
+++ b/include/asm-ppc/machdep.h
@@ -8,10 +8,6 @@
 #include <asm/setup.h>
 #include <asm/page.h>
 
-#ifdef CONFIG_APUS
-#include <asm-m68k/machdep.h>
-#endif
-
 struct pt_regs;
 struct pci_bus; 
 struct pci_dev;
diff --git a/include/asm-ppc/ocp.h b/include/asm-ppc/ocp.h
index 16dbc7d17450..1379a4f76de3 100644
--- a/include/asm-ppc/ocp.h
+++ b/include/asm-ppc/ocp.h
@@ -27,10 +27,10 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/device.h>
+#include <linux/rwsem.h>
 
 #include <asm/mmu.h>
 #include <asm/ocp_ids.h>
-#include <asm/rwsem.h>
 #include <asm/semaphore.h>
 
 #ifdef CONFIG_PPC_OCP
diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h
index fe95c8258cf9..ad4c5a1bc9d6 100644
--- a/include/asm-ppc/page.h
+++ b/include/asm-ppc/page.h
@@ -97,62 +97,22 @@ extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
 extern void copy_user_page(void *to, void *from, unsigned long vaddr,
                            struct page *pg);
 
-#ifndef CONFIG_APUS
 #define PPC_MEMSTART    0
-#define PPC_PGSTART     0
 #define PPC_MEMOFFSET   PAGE_OFFSET
-#else
-extern unsigned long ppc_memstart;
-extern unsigned long ppc_pgstart;
-extern unsigned long ppc_memoffset;
-#define PPC_MEMSTART    ppc_memstart
-#define PPC_PGSTART     ppc_pgstart
-#define PPC_MEMOFFSET   ppc_memoffset
-#endif
 
-#if defined(CONFIG_APUS) && !defined(MODULE)
-/* map phys->virtual and virtual->phys for RAM pages */
-static inline unsigned long ___pa(unsigned long v)
-{
-        unsigned long p;
-        asm volatile ("1: addis %0, %1, %2;"
-                      ".section \".vtop_fixup\",\"aw\";"
-                      ".align  1;"
-                      ".long   1b;"
-                      ".previous;"
-                      : "=r" (p)
-                      : "b" (v), "K" (((-PAGE_OFFSET) >> 16) & 0xffff));
-
-        return p;
-}
-static inline void* ___va(unsigned long p)
-{
-        unsigned long v;
-        asm volatile ("1: addis %0, %1, %2;"
-                      ".section \".ptov_fixup\",\"aw\";"
-                      ".align  1;"
-                      ".long   1b;"
-                      ".previous;"
-                      : "=r" (v)
-                      : "b" (p), "K" (((PAGE_OFFSET) >> 16) & 0xffff));
-
-        return (void*) v;
-}
-#else
 #define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET)
 #define ___va(paddr) ((paddr)+PPC_MEMOFFSET)
-#endif
 
 extern int page_is_ram(unsigned long pfn);
 
 #define __pa(x) ___pa((unsigned long)(x))
 #define __va(x) ((void *)(___va((unsigned long)(x))))
 
-#define ARCH_PFN_OFFSET         (PPC_PGSTART)
+#define ARCH_PFN_OFFSET         0
 #define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define page_to_virt(page)      __va(page_to_pfn(page) << PAGE_SHIFT)
 
-#define pfn_valid(pfn)          (((pfn) - PPC_PGSTART) < max_mapnr)
+#define pfn_valid(pfn)          ((pfn) < max_mapnr)
 #define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 
 /* Pure 2^n version of get_order */
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
index c159315d2c8f..063ad91cbbcc 100644
--- a/include/asm-ppc/pgtable.h
+++ b/include/asm-ppc/pgtable.h
@@ -765,14 +765,6 @@ extern void paging_init(void);
 #define pte_to_pgoff(pte)       (pte_val(pte) >> 3)
 #define pgoff_to_pte(off)       ((pte_t) { ((off) << 3) | _PAGE_FILE })
 
-/* CONFIG_APUS */
-/* For virtual address to physical address conversion */
-extern void cache_clear(__u32 addr, int length);
-extern void cache_push(__u32 addr, int length);
-extern int mm_end_of_chunk (unsigned long addr, int len);
-extern unsigned long iopa(unsigned long addr);
-extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
-
 /* Values for nocacheflag and cmode */
 /* These are not used by the APUS kernel_map, but prevents
    compilation errors. */
diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h
index 901f7fa8b2d7..71f4c996fe75 100644
--- a/include/asm-ppc/prom.h
+++ b/include/asm-ppc/prom.h
@@ -35,7 +35,6 @@ extern unsigned long sub_reloc_offset(unsigned long);
 #define machine_is_compatible(x)                0
 #define of_find_compatible_node(f, t, c)        NULL
 #define of_get_property(p, n, l)                NULL
-#define get_property(a, b, c)                   of_get_property((a), (b), (c))
 
 #endif /* _PPC_PROM_H */
 #endif /* __KERNEL__ */
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 8b17ffe222c4..d2da84acf45d 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -389,12 +389,14 @@ extern Elf64_Dyn _DYNAMIC [];
 
 #endif
 
+/* Optional callbacks to write extra ELF notes. */
 #ifndef ARCH_HAVE_EXTRA_ELF_NOTES
-static inline int arch_notes_size(void) { return 0; }
-static inline void arch_write_notes(struct file *file) { }
-
-#define ELF_CORE_EXTRA_NOTES_SIZE arch_notes_size()
-#define ELF_CORE_WRITE_EXTRA_NOTES arch_write_notes(file)
-#endif /* ARCH_HAVE_EXTRA_ELF_NOTES */
+static inline int elf_coredump_extra_notes_size(void) { return 0; }
+static inline int elf_coredump_extra_notes_write(struct file *file,
+                        loff_t *foffset) { return 0; }
+#else
+extern int elf_coredump_extra_notes_size(void);
+extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
+#endif
 
 #endif /* _LINUX_ELF_H */
diff --git a/include/linux/of.h b/include/linux/of.h
index 47734ffd9745..6df80e985914 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -54,7 +54,6 @@ extern int of_device_is_compatible(const struct device_node *device,
 extern const void *of_get_property(const struct device_node *node,
                                 const char *name,
                                 int *lenp);
-#define get_property(a, b, c)   of_get_property((a), (b), (c))
 extern int of_n_addr_cells(struct device_node *np);
 extern int of_n_size_cells(struct device_node *np);
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 8acae4eeaa76..3948708c42ca 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2113,8 +2113,11 @@
 #define PCI_DEVICE_ID_MPC8533           0x0031
 #define PCI_DEVICE_ID_MPC8544E          0x0032
 #define PCI_DEVICE_ID_MPC8544           0x0033
+#define PCI_DEVICE_ID_MPC8572E          0x0040
+#define PCI_DEVICE_ID_MPC8572           0x0041
 #define PCI_DEVICE_ID_MPC8641           0x7010
 #define PCI_DEVICE_ID_MPC8641D          0x7011
+#define PCI_DEVICE_ID_MPC8610           0x7018
 
 #define PCI_VENDOR_ID_PASEMI            0x1959
 
diff --git a/include/linux/xilinxfb.h b/include/linux/xilinxfb.h
new file mode 100644
index 000000000000..f2463f559fb9
--- /dev/null
+++ b/include/linux/xilinxfb.h
@@ -0,0 +1,30 @@
+/*
+ * Platform device data for Xilinx Framebuffer device
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __XILINXFB_H__
+#define __XILINXFB_H__
+
+#include <linux/types.h>
+
+/* ML300/403 reference design framebuffer driver platform data struct */
+struct xilinxfb_platform_data {
+        u32 rotate_screen;      /* Flag to rotate display 180 degrees */
+        u32 screen_height_mm;   /* Physical dimentions of screen in mm */
+        u32 screen_width_mm;
+        u32 xres, yres;         /* resolution of screen in pixels */
+        u32 xvirt, yvirt;       /* resolution of memory buffer */
+
+        /* Physical address of framebuffer memory; If non-zero, driver
+         * will use provided memory address instead of allocating one from
+         * the consistent pool. */
+        u32 fb_phys;
+};
+
+#endif  /* __XILINXFB_H__ */