261 files changed, 0 insertions, 39518 deletions

diff --git a/include/asm-powerpc/8253pit.h b/include/asm-powerpc/8253pit.h
deleted file mode 100644
index b70d6e53b303..000000000000
--- a/include/asm-powerpc/8253pit.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ASM_POWERPC_8253PIT_H
-#define _ASM_POWERPC_8253PIT_H
-
-/*
- * 8253/8254 Programmable Interval Timer
- */
-
-#define PIT_TICK_RATE   1193182UL
-
-#endif  /* _ASM_POWERPC_8253PIT_H */
diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h
deleted file mode 100644
index 4b0e15206006..000000000000
--- a/include/asm-powerpc/8xx_immap.h
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- * MPC8xx Internal Memory Map
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * The I/O on the MPC860 is comprised of blocks of special registers
- * and the dual port ram for the Communication Processor Module.
- * Within this space are functional units such as the SIU, memory
- * controller, system timers, and other control functions.  It is
- * a combination that I found difficult to separate into logical
- * functional files.....but anyone else is welcome to try.  -- Dan
- */
-#ifdef __KERNEL__
-#ifndef __IMMAP_8XX__
-#define __IMMAP_8XX__
-
-/* System configuration registers.
-*/
-typedef struct sys_conf {
-        uint    sc_siumcr;
-        uint    sc_sypcr;
-        uint    sc_swt;
-        char    res1[2];
-        ushort  sc_swsr;
-        uint    sc_sipend;
-        uint    sc_simask;
-        uint    sc_siel;
-        uint    sc_sivec;
-        uint    sc_tesr;
-        char    res2[0xc];
-        uint    sc_sdcr;
-        char    res3[0x4c];
-} sysconf8xx_t;
-
-/* PCMCIA configuration registers.
-*/
-typedef struct pcmcia_conf {
-        uint    pcmc_pbr0;
-        uint    pcmc_por0;
-        uint    pcmc_pbr1;
-        uint    pcmc_por1;
-        uint    pcmc_pbr2;
-        uint    pcmc_por2;
-        uint    pcmc_pbr3;
-        uint    pcmc_por3;
-        uint    pcmc_pbr4;
-        uint    pcmc_por4;
-        uint    pcmc_pbr5;
-        uint    pcmc_por5;
-        uint    pcmc_pbr6;
-        uint    pcmc_por6;
-        uint    pcmc_pbr7;
-        uint    pcmc_por7;
-        char    res1[0x20];
-        uint    pcmc_pgcra;
-        uint    pcmc_pgcrb;
-        uint    pcmc_pscr;
-        char    res2[4];
-        uint    pcmc_pipr;
-        char    res3[4];
-        uint    pcmc_per;
-        char    res4[4];
-} pcmconf8xx_t;
-
-/* Memory controller registers.
-*/
-typedef struct  mem_ctlr {
-        uint    memc_br0;
-        uint    memc_or0;
-        uint    memc_br1;
-        uint    memc_or1;
-        uint    memc_br2;
-        uint    memc_or2;
-        uint    memc_br3;
-        uint    memc_or3;
-        uint    memc_br4;
-        uint    memc_or4;
-        uint    memc_br5;
-        uint    memc_or5;
-        uint    memc_br6;
-        uint    memc_or6;
-        uint    memc_br7;
-        uint    memc_or7;
-        char    res1[0x24];
-        uint    memc_mar;
-        uint    memc_mcr;
-        char    res2[4];
-        uint    memc_mamr;
-        uint    memc_mbmr;
-        ushort  memc_mstat;
-        ushort  memc_mptpr;
-        uint    memc_mdr;
-        char    res3[0x80];
-} memctl8xx_t;
-
-/*-----------------------------------------------------------------------
- * BR - Memory Controler: Base Register                                 16-9
- */
-#define BR_BA_MSK       0xffff8000      /* Base Address Mask                    */
-#define BR_AT_MSK       0x00007000      /* Address Type Mask                    */
-#define BR_PS_MSK       0x00000c00      /* Port Size Mask                       */
-#define BR_PS_32        0x00000000      /* 32 bit port size                     */
-#define BR_PS_16        0x00000800      /* 16 bit port size                     */
-#define BR_PS_8         0x00000400      /*  8 bit port size                     */
-#define BR_PARE         0x00000200      /* Parity Enable                        */
-#define BR_WP           0x00000100      /* Write Protect                        */
-#define BR_MS_MSK       0x000000c0      /* Machine Select Mask                  */
-#define BR_MS_GPCM      0x00000000      /* G.P.C.M. Machine Select              */
-#define BR_MS_UPMA      0x00000080      /* U.P.M.A Machine Select               */
-#define BR_MS_UPMB      0x000000c0      /* U.P.M.B Machine Select               */
-#define BR_V            0x00000001      /* Bank Valid                           */
-
-/*-----------------------------------------------------------------------
- * OR - Memory Controler: Option Register                               16-11
- */
-#define OR_AM_MSK       0xffff8000      /* Address Mask Mask                    */
-#define OR_ATM_MSK      0x00007000      /* Address Type Mask Mask               */
-#define OR_CSNT_SAM     0x00000800      /* Chip Select Negation Time/ Start     */
-                                        /* Address Multiplex                    */
-#define OR_ACS_MSK      0x00000600      /* Address to Chip Select Setup mask    */
-#define OR_ACS_DIV1     0x00000000      /* CS is output at the same time        */
-#define OR_ACS_DIV4     0x00000400      /* CS is output 1/4 a clock later       */
-#define OR_ACS_DIV2     0x00000600      /* CS is output 1/2 a clock later       */
-#define OR_G5LA         0x00000400      /* Output #GPL5 on #GPL_A5              */
-#define OR_G5LS         0x00000200      /* Drive #GPL high on falling edge of...*/
-#define OR_BI           0x00000100      /* Burst inhibit                        */
-#define OR_SCY_MSK      0x000000f0      /* Cycle Length in Clocks               */
-#define OR_SCY_0_CLK    0x00000000      /* 0 clock cycles wait states           */
-#define OR_SCY_1_CLK    0x00000010      /* 1 clock cycles wait states           */
-#define OR_SCY_2_CLK    0x00000020      /* 2 clock cycles wait states           */
-#define OR_SCY_3_CLK    0x00000030      /* 3 clock cycles wait states           */
-#define OR_SCY_4_CLK    0x00000040      /* 4 clock cycles wait states           */
-#define OR_SCY_5_CLK    0x00000050      /* 5 clock cycles wait states           */
-#define OR_SCY_6_CLK    0x00000060      /* 6 clock cycles wait states           */
-#define OR_SCY_7_CLK    0x00000070      /* 7 clock cycles wait states           */
-#define OR_SCY_8_CLK    0x00000080      /* 8 clock cycles wait states           */
-#define OR_SCY_9_CLK    0x00000090      /* 9 clock cycles wait states           */
-#define OR_SCY_10_CLK   0x000000a0      /* 10 clock cycles wait states          */
-#define OR_SCY_11_CLK   0x000000b0      /* 11 clock cycles wait states          */
-#define OR_SCY_12_CLK   0x000000c0      /* 12 clock cycles wait states          */
-#define OR_SCY_13_CLK   0x000000d0      /* 13 clock cycles wait states          */
-#define OR_SCY_14_CLK   0x000000e0      /* 14 clock cycles wait states          */
-#define OR_SCY_15_CLK   0x000000f0      /* 15 clock cycles wait states          */
-#define OR_SETA         0x00000008      /* External Transfer Acknowledge        */
-#define OR_TRLX         0x00000004      /* Timing Relaxed                       */
-#define OR_EHTR         0x00000002      /* Extended Hold Time on Read           */
-
-/* System Integration Timers.
-*/
-typedef struct  sys_int_timers {
-        ushort  sit_tbscr;
-        char    res0[0x02];
-        uint    sit_tbreff0;
-        uint    sit_tbreff1;
-        char    res1[0x14];
-        ushort  sit_rtcsc;
-        char    res2[0x02];
-        uint    sit_rtc;
-        uint    sit_rtsec;
-        uint    sit_rtcal;
-        char    res3[0x10];
-        ushort  sit_piscr;
-        char    res4[2];
-        uint    sit_pitc;
-        uint    sit_pitr;
-        char    res5[0x34];
-} sit8xx_t;
-
-#define TBSCR_TBIRQ_MASK        ((ushort)0xff00)
-#define TBSCR_REFA              ((ushort)0x0080)
-#define TBSCR_REFB              ((ushort)0x0040)
-#define TBSCR_REFAE             ((ushort)0x0008)
-#define TBSCR_REFBE             ((ushort)0x0004)
-#define TBSCR_TBF               ((ushort)0x0002)
-#define TBSCR_TBE               ((ushort)0x0001)
-
-#define RTCSC_RTCIRQ_MASK       ((ushort)0xff00)
-#define RTCSC_SEC               ((ushort)0x0080)
-#define RTCSC_ALR               ((ushort)0x0040)
-#define RTCSC_38K               ((ushort)0x0010)
-#define RTCSC_SIE               ((ushort)0x0008)
-#define RTCSC_ALE               ((ushort)0x0004)
-#define RTCSC_RTF               ((ushort)0x0002)
-#define RTCSC_RTE               ((ushort)0x0001)
-
-#define PISCR_PIRQ_MASK         ((ushort)0xff00)
-#define PISCR_PS                ((ushort)0x0080)
-#define PISCR_PIE               ((ushort)0x0004)
-#define PISCR_PTF               ((ushort)0x0002)
-#define PISCR_PTE               ((ushort)0x0001)
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
-        uint    car_sccr;
-        uint    car_plprcr;
-        uint    car_rsr;
-        char    res[0x74];        /* Reserved area                  */
-} car8xx_t;
-
-/* System Integration Timers keys.
-*/
-typedef struct sitk {
-        uint    sitk_tbscrk;
-        uint    sitk_tbreff0k;
-        uint    sitk_tbreff1k;
-        uint    sitk_tbk;
-        char    res1[0x10];
-        uint    sitk_rtcsck;
-        uint    sitk_rtck;
-        uint    sitk_rtseck;
-        uint    sitk_rtcalk;
-        char    res2[0x10];
-        uint    sitk_piscrk;
-        uint    sitk_pitck;
-        char    res3[0x38];
-} sitk8xx_t;
-
-/* Clocks and reset keys.
-*/
-typedef struct cark {
-        uint    cark_sccrk;
-        uint    cark_plprcrk;
-        uint    cark_rsrk;
-        char    res[0x474];
-} cark8xx_t;
-
-/* The key to unlock registers maintained by keep-alive power.
-*/
-#define KAPWR_KEY       ((unsigned int)0x55ccaa33)
-
-/* Video interface.  MPC823 Only.
-*/
-typedef struct vid823 {
-        ushort  vid_vccr;
-        ushort  res1;
-        u_char  vid_vsr;
-        u_char  res2;
-        u_char  vid_vcmr;
-        u_char  res3;
-        uint    vid_vbcb;
-        uint    res4;
-        uint    vid_vfcr0;
-        uint    vid_vfaa0;
-        uint    vid_vfba0;
-        uint    vid_vfcr1;
-        uint    vid_vfaa1;
-        uint    vid_vfba1;
-        u_char  res5[0x18];
-} vid823_t;
-
-/* LCD interface.  823 Only.
-*/
-typedef struct lcd {
-        uint    lcd_lccr;
-        uint    lcd_lchcr;
-        uint    lcd_lcvcr;
-        char    res1[4];
-        uint    lcd_lcfaa;
-        uint    lcd_lcfba;
-        char    lcd_lcsr;
-        char    res2[0x7];
-} lcd823_t;
-
-/* I2C
-*/
-typedef struct i2c {
-        u_char  i2c_i2mod;
-        char    res1[3];
-        u_char  i2c_i2add;
-        char    res2[3];
-        u_char  i2c_i2brg;
-        char    res3[3];
-        u_char  i2c_i2com;
-        char    res4[3];
-        u_char  i2c_i2cer;
-        char    res5[3];
-        u_char  i2c_i2cmr;
-        char    res6[0x8b];
-} i2c8xx_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
-        char    res1[4];
-        uint    sdma_sdar;
-        u_char  sdma_sdsr;
-        char    res3[3];
-        u_char  sdma_sdmr;
-        char    res4[3];
-        u_char  sdma_idsr1;
-        char    res5[3];
-        u_char  sdma_idmr1;
-        char    res6[3];
-        u_char  sdma_idsr2;
-        char    res7[3];
-        u_char  sdma_idmr2;
-        char    res8[0x13];
-} sdma8xx_t;
-
-/* Communication Processor Module Interrupt Controller.
-*/
-typedef struct cpm_ic {
-        ushort  cpic_civr;
-        char    res[0xe];
-        uint    cpic_cicr;
-        uint    cpic_cipr;
-        uint    cpic_cimr;
-        uint    cpic_cisr;
-} cpic8xx_t;
-
-/* Input/Output Port control/status registers.
-*/
-typedef struct io_port {
-        ushort  iop_padir;
-        ushort  iop_papar;
-        ushort  iop_paodr;
-        ushort  iop_padat;
-        char    res1[8];
-        ushort  iop_pcdir;
-        ushort  iop_pcpar;
-        ushort  iop_pcso;
-        ushort  iop_pcdat;
-        ushort  iop_pcint;
-        char    res2[6];
-        ushort  iop_pddir;
-        ushort  iop_pdpar;
-        char    res3[2];
-        ushort  iop_pddat;
-        uint    utmode;
-        char    res4[4];
-} iop8xx_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
-        ushort  cpmt_tgcr;
-        char    res1[0xe];
-        ushort  cpmt_tmr1;
-        ushort  cpmt_tmr2;
-        ushort  cpmt_trr1;
-        ushort  cpmt_trr2;
-        ushort  cpmt_tcr1;
-        ushort  cpmt_tcr2;
-        ushort  cpmt_tcn1;
-        ushort  cpmt_tcn2;
-        ushort  cpmt_tmr3;
-        ushort  cpmt_tmr4;
-        ushort  cpmt_trr3;
-        ushort  cpmt_trr4;
-        ushort  cpmt_tcr3;
-        ushort  cpmt_tcr4;
-        ushort  cpmt_tcn3;
-        ushort  cpmt_tcn4;
-        ushort  cpmt_ter1;
-        ushort  cpmt_ter2;
-        ushort  cpmt_ter3;
-        ushort  cpmt_ter4;
-        char    res2[8];
-} cpmtimer8xx_t;
-
-/* Finally, the Communication Processor stuff.....
-*/
-typedef struct scc {            /* Serial communication channels */
-        uint    scc_gsmrl;
-        uint    scc_gsmrh;
-        ushort  scc_psmr;
-        char    res1[2];
-        ushort  scc_todr;
-        ushort  scc_dsr;
-        ushort  scc_scce;
-        char    res2[2];
-        ushort  scc_sccm;
-        char    res3;
-        u_char  scc_sccs;
-        char    res4[8];
-} scc_t;
-
-typedef struct smc {            /* Serial management channels */
-        char    res1[2];
-        ushort  smc_smcmr;
-        char    res2[2];
-        u_char  smc_smce;
-        char    res3[3];
-        u_char  smc_smcm;
-        char    res4[5];
-} smc_t;
-
-/* MPC860T Fast Ethernet Controller.  It isn't part of the CPM, but
- * it fits within the address space.
- */
-
-typedef struct fec {
-        uint    fec_addr_low;           /* lower 32 bits of station address     */
-        ushort  fec_addr_high;          /* upper 16 bits of station address     */
-        ushort  res1;                   /* reserved                             */
-        uint    fec_hash_table_high;    /* upper 32-bits of hash table          */
-        uint    fec_hash_table_low;     /* lower 32-bits of hash table          */
-        uint    fec_r_des_start;        /* beginning of Rx descriptor ring      */
-        uint    fec_x_des_start;        /* beginning of Tx descriptor ring      */
-        uint    fec_r_buff_size;        /* Rx buffer size                       */
-        uint    res2[9];                /* reserved                             */
-        uint    fec_ecntrl;             /* ethernet control register            */
-        uint    fec_ievent;             /* interrupt event register             */
-        uint    fec_imask;              /* interrupt mask register              */
-        uint    fec_ivec;               /* interrupt level and vector status    */
-        uint    fec_r_des_active;       /* Rx ring updated flag                 */
-        uint    fec_x_des_active;       /* Tx ring updated flag                 */
-        uint    res3[10];               /* reserved                             */
-        uint    fec_mii_data;           /* MII data register                    */
-        uint    fec_mii_speed;          /* MII speed control register           */
-        uint    res4[17];               /* reserved                             */
-        uint    fec_r_bound;            /* end of RAM (read-only)               */
-        uint    fec_r_fstart;           /* Rx FIFO start address                */
-        uint    res5[6];                /* reserved                             */
-        uint    fec_x_fstart;           /* Tx FIFO start address                */
-        uint    res6[17];               /* reserved                             */
-        uint    fec_fun_code;           /* fec SDMA function code               */
-        uint    res7[3];                /* reserved                             */
-        uint    fec_r_cntrl;            /* Rx control register                  */
-        uint    fec_r_hash;             /* Rx hash register                     */
-        uint    res8[14];               /* reserved                             */
-        uint    fec_x_cntrl;            /* Tx control register                  */
-        uint    res9[0x1e];             /* reserved                             */
-} fec_t;
-
-/* The FEC and LCD color map share the same address space....
- * I guess we will never see an 823T :-).
- */
-union fec_lcd {
-        fec_t   fl_un_fec;
-        u_char  fl_un_cmap[0x200];
-};
-
-typedef struct comm_proc {
-        /* General control and status registers.
-        */
-        ushort  cp_cpcr;
-        u_char  res1[2];
-        ushort  cp_rccr;
-        u_char  res2;
-        u_char  cp_rmds;
-        u_char  res3[4];
-        ushort  cp_cpmcr1;
-        ushort  cp_cpmcr2;
-        ushort  cp_cpmcr3;
-        ushort  cp_cpmcr4;
-        u_char  res4[2];
-        ushort  cp_rter;
-        u_char  res5[2];
-        ushort  cp_rtmr;
-        u_char  res6[0x14];
-
-        /* Baud rate generators.
-        */
-        uint    cp_brgc1;
-        uint    cp_brgc2;
-        uint    cp_brgc3;
-        uint    cp_brgc4;
-
-        /* Serial Communication Channels.
-        */
-        scc_t   cp_scc[4];
-
-        /* Serial Management Channels.
-        */
-        smc_t   cp_smc[2];
-
-        /* Serial Peripheral Interface.
-        */
-        ushort  cp_spmode;
-        u_char  res7[4];
-        u_char  cp_spie;
-        u_char  res8[3];
-        u_char  cp_spim;
-        u_char  res9[2];
-        u_char  cp_spcom;
-        u_char  res10[2];
-
-        /* Parallel Interface Port.
-        */
-        u_char  res11[2];
-        ushort  cp_pipc;
-        u_char  res12[2];
-        ushort  cp_ptpr;
-        uint    cp_pbdir;
-        uint    cp_pbpar;
-        u_char  res13[2];
-        ushort  cp_pbodr;
-        uint    cp_pbdat;
-
-        /* Port E - MPC87x/88x only.
-         */
-        uint    cp_pedir;
-        uint    cp_pepar;
-        uint    cp_peso;
-        uint    cp_peodr;
-        uint    cp_pedat;
-
-        /* Communications Processor Timing Register -
-           Contains RMII Timing for the FECs on MPC87x/88x only.
-        */
-        uint    cp_cptr;
-
-        /* Serial Interface and Time Slot Assignment.
-        */
-        uint    cp_simode;
-        u_char  cp_sigmr;
-        u_char  res15;
-        u_char  cp_sistr;
-        u_char  cp_sicmr;
-        u_char  res16[4];
-        uint    cp_sicr;
-        uint    cp_sirp;
-        u_char  res17[0xc];
-
-        /* 256 bytes of MPC823 video controller RAM array.
-        */
-        u_char  cp_vcram[0x100];
-        u_char  cp_siram[0x200];
-
-        /* The fast ethernet controller is not really part of the CPM,
-         * but it resides in the address space.
-         * The LCD color map is also here.
-         */
-        union   fec_lcd fl_un;
-#define cp_fec          fl_un.fl_un_fec
-#define lcd_cmap        fl_un.fl_un_cmap
-        char    res18[0xE00];
-
-        /* The DUET family has a second FEC here */
-        fec_t   cp_fec2;
-#define cp_fec1 cp_fec  /* consistency macro */
-
-        /* Dual Ported RAM follows.
-         * There are many different formats for this memory area
-         * depending upon the devices used and options chosen.
-         * Some processors don't have all of it populated.
-         */
-        u_char  cp_dpmem[0x1C00];       /* BD / Data / ucode */
-        u_char  cp_dparam[0x400];       /* Parameter RAM */
-} cpm8xx_t;
-
-/* Internal memory map.
-*/
-typedef struct immap {
-        sysconf8xx_t    im_siu_conf;    /* SIU Configuration */
-        pcmconf8xx_t    im_pcmcia;      /* PCMCIA Configuration */
-        memctl8xx_t     im_memctl;      /* Memory Controller */
-        sit8xx_t        im_sit;         /* System integration timers */
-        car8xx_t        im_clkrst;      /* Clocks and reset */
-        sitk8xx_t       im_sitk;        /* Sys int timer keys */
-        cark8xx_t       im_clkrstk;     /* Clocks and reset keys */
-        vid823_t        im_vid;         /* Video (823 only) */
-        lcd823_t        im_lcd;         /* LCD (823 only) */
-        i2c8xx_t        im_i2c;         /* I2C control/status */
-        sdma8xx_t       im_sdma;        /* SDMA control/status */
-        cpic8xx_t       im_cpic;        /* CPM Interrupt Controller */
-        iop8xx_t        im_ioport;      /* IO Port control/status */
-        cpmtimer8xx_t   im_cpmtimer;    /* CPM timers */
-        cpm8xx_t        im_cpm;         /* Communication processor */
-} immap_t;
-
-#endif /* __IMMAP_8XX__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
deleted file mode 100644
index 5ab7d7fe198c..000000000000
--- a/include/asm-powerpc/Kbuild
+++ /dev/null
@@ -1,37 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += ioctls.h
-header-y += sembuf.h
-header-y += siginfo.h
-header-y += stat.h
-header-y += errno.h
-header-y += ipcbuf.h
-header-y += msgbuf.h
-header-y += shmbuf.h
-header-y += socket.h
-header-y += termbits.h
-header-y += fcntl.h
-header-y += poll.h
-header-y += sockios.h
-header-y += ucontext.h
-header-y += ioctl.h
-header-y += linkage.h
-header-y += resource.h
-header-y += sigcontext.h
-header-y += statfs.h
-header-y += ps3fb.h
-
-unifdef-y += bootx.h
-unifdef-y += byteorder.h
-unifdef-y += cputable.h
-unifdef-y += elf.h
-unifdef-y += nvram.h
-unifdef-y += param.h
-unifdef-y += posix_types.h
-unifdef-y += seccomp.h
-unifdef-y += signal.h
-unifdef-y += spu_info.h
-unifdef-y += termios.h
-unifdef-y += types.h
-unifdef-y += unistd.h
diff --git a/include/asm-powerpc/a.out.h b/include/asm-powerpc/a.out.h
deleted file mode 100644
index 89cead6b176e..000000000000
--- a/include/asm-powerpc/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_A_OUT_H
-#define _ASM_POWERPC_A_OUT_H
-
-struct exec
-{
-        unsigned long a_info;   /* Use macros N_MAGIC, etc for access */
-        unsigned a_text;        /* length of text, in bytes */
-        unsigned a_data;        /* length of data, in bytes */
-        unsigned a_bss;         /* length of uninitialized data area for file, in bytes */
-        unsigned a_syms;        /* length of symbol table data in file, in bytes */
-        unsigned a_entry;       /* start address */
-        unsigned a_trsize;      /* length of relocation info for text, in bytes */
-        unsigned a_drsize;      /* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)     ((a).a_trsize)
-#define N_DRSIZE(a)     ((a).a_drsize)
-#define N_SYMSIZE(a)    ((a).a_syms)
-
-#endif /* _ASM_POWERPC_A_OUT_H */
diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h
deleted file mode 100644
index 98324c5a8286..000000000000
--- a/include/asm-powerpc/abs_addr.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _ASM_POWERPC_ABS_ADDR_H
-#define _ASM_POWERPC_ABS_ADDR_H
-#ifdef __KERNEL__
-
-
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/lmb.h>
-
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/firmware.h>
-
-struct mschunks_map {
-        unsigned long num_chunks;
-        unsigned long chunk_size;
-        unsigned long chunk_shift;
-        unsigned long chunk_mask;
-        u32 *mapping;
-};
-
-extern struct mschunks_map mschunks_map;
-
-/* Chunks are 256 KB */
-#define MSCHUNKS_CHUNK_SHIFT    (18)
-#define MSCHUNKS_CHUNK_SIZE     (1UL << MSCHUNKS_CHUNK_SHIFT)
-#define MSCHUNKS_OFFSET_MASK    (MSCHUNKS_CHUNK_SIZE - 1)
-
-static inline unsigned long chunk_to_addr(unsigned long chunk)
-{
-        return chunk << MSCHUNKS_CHUNK_SHIFT;
-}
-
-static inline unsigned long addr_to_chunk(unsigned long addr)
-{
-        return addr >> MSCHUNKS_CHUNK_SHIFT;
-}
-
-static inline unsigned long phys_to_abs(unsigned long pa)
-{
-        unsigned long chunk;
-
-        /* This is a no-op on non-iSeries */
-        if (!firmware_has_feature(FW_FEATURE_ISERIES))
-                return pa;
-
-        chunk = addr_to_chunk(pa);
-
-        if (chunk < mschunks_map.num_chunks)
-                chunk = mschunks_map.mapping[chunk];
-
-        return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK);
-}
-
-/* Convenience macros */
-#define virt_to_abs(va) phys_to_abs(__pa(va))
-#define abs_to_virt(aa) __va(aa)
-
-/*
- * Converts Virtual Address to Real Address for
- * Legacy iSeries Hypervisor calls
- */
-#define iseries_hv_addr(virtaddr)       \
-        (0x8000000000000000 | virt_to_abs(virtaddr))
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_ABS_ADDR_H */
diff --git a/include/asm-powerpc/agp.h b/include/asm-powerpc/agp.h
deleted file mode 100644
index 86455c4c31ee..000000000000
--- a/include/asm-powerpc/agp.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_POWERPC_AGP_H
-#define _ASM_POWERPC_AGP_H
-#ifdef __KERNEL__
-
-#include <asm/io.h>
-
-#define map_page_into_agp(page)
-#define unmap_page_from_agp(page)
-#define flush_agp_cache() mb()
-
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)         \
-        ((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)   \
-        free_pages((unsigned long)(table), (order))
-
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_AGP_H */
diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h
deleted file mode 100644
index 8f0fe7971949..000000000000
--- a/include/asm-powerpc/asm-compat.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef _ASM_POWERPC_ASM_COMPAT_H
-#define _ASM_POWERPC_ASM_COMPAT_H
-
-#include <asm/types.h>
-
-#ifdef __ASSEMBLY__
-#  define stringify_in_c(...)   __VA_ARGS__
-#  define ASM_CONST(x)          x
-#else
-/* This version of stringify will deal with commas... */
-#  define __stringify_in_c(...) #__VA_ARGS__
-#  define stringify_in_c(...)   __stringify_in_c(__VA_ARGS__) " "
-#  define __ASM_CONST(x)        x##UL
-#  define ASM_CONST(x)          __ASM_CONST(x)
-#endif
-
-
-#ifdef __powerpc64__
-
-/* operations for longs and pointers */
-#define PPC_LL          stringify_in_c(ld)
-#define PPC_STL         stringify_in_c(std)
-#define PPC_LCMPI       stringify_in_c(cmpdi)
-#define PPC_LONG        stringify_in_c(.llong)
-#define PPC_LONG_ALIGN  stringify_in_c(.balign 8)
-#define PPC_TLNEI       stringify_in_c(tdnei)
-#define PPC_LLARX       stringify_in_c(ldarx)
-#define PPC_STLCX       stringify_in_c(stdcx.)
-#define PPC_CNTLZL      stringify_in_c(cntlzd)
-
-/* Move to CR, single-entry optimized version. Only available
- * on POWER4 and later.
- */
-#ifdef CONFIG_POWER4_ONLY
-#define PPC_MTOCRF      stringify_in_c(mtocrf)
-#else
-#define PPC_MTOCRF      stringify_in_c(mtcrf)
-#endif
-
-#else /* 32-bit */
-
-/* operations for longs and pointers */
-#define PPC_LL          stringify_in_c(lwz)
-#define PPC_STL         stringify_in_c(stw)
-#define PPC_LCMPI       stringify_in_c(cmpwi)
-#define PPC_LONG        stringify_in_c(.long)
-#define PPC_LONG_ALIGN  stringify_in_c(.balign 4)
-#define PPC_TLNEI       stringify_in_c(twnei)
-#define PPC_LLARX       stringify_in_c(lwarx)
-#define PPC_STLCX       stringify_in_c(stwcx.)
-#define PPC_CNTLZL      stringify_in_c(cntlzw)
-#define PPC_MTOCRF      stringify_in_c(mtcrf)
-
-#endif
-
-#ifdef __KERNEL__
-#ifdef CONFIG_IBM405_ERR77
-/* Erratum #77 on the 405 means we need a sync or dcbt before every
- * stwcx.  The old ATOMIC_SYNC_FIX covered some but not all of this.
- */
-#define PPC405_ERR77(ra,rb)     stringify_in_c(dcbt     ra, rb;)
-#define PPC405_ERR77_SYNC       stringify_in_c(sync;)
-#else
-#define PPC405_ERR77(ra,rb)
-#define PPC405_ERR77_SYNC
-#endif
-#endif
-
-#endif /* _ASM_POWERPC_ASM_COMPAT_H */
diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h
deleted file mode 100644
index f3fc733758f5..000000000000
--- a/include/asm-powerpc/atomic.h
+++ /dev/null
@@ -1,479 +0,0 @@
-#ifndef _ASM_POWERPC_ATOMIC_H_
-#define _ASM_POWERPC_ATOMIC_H_
-
-/*
- * PowerPC atomic operations
- */
-
-typedef struct { int counter; } atomic_t;
-
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <asm/synch.h>
-#include <asm/asm-compat.h>
-#include <asm/system.h>
-
-#define ATOMIC_INIT(i)          { (i) }
-
-static __inline__ int atomic_read(const atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
-
-        return t;
-}
-
-static __inline__ void atomic_set(atomic_t *v, int i)
-{
-        __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
-}
-
-static __inline__ void atomic_add(int a, atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-"1:     lwarx   %0,0,%3         # atomic_add\n\
-        add     %0,%2,%0\n"
-        PPC405_ERR77(0,%3)
-"       stwcx.  %0,0,%3 \n\
-        bne-    1b"
-        : "=&r" (t), "+m" (v->counter)
-        : "r" (a), "r" (&v->counter)
-        : "cc");
-}
-
-static __inline__ int atomic_add_return(int a, atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%2         # atomic_add_return\n\
-        add     %0,%1,%0\n"
-        PPC405_ERR77(0,%2)
-"       stwcx.  %0,0,%2 \n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (t)
-        : "r" (a), "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-#define atomic_add_negative(a, v)       (atomic_add_return((a), (v)) < 0)
-
-static __inline__ void atomic_sub(int a, atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-"1:     lwarx   %0,0,%3         # atomic_sub\n\
-        subf    %0,%2,%0\n"
-        PPC405_ERR77(0,%3)
-"       stwcx.  %0,0,%3 \n\
-        bne-    1b"
-        : "=&r" (t), "+m" (v->counter)
-        : "r" (a), "r" (&v->counter)
-        : "cc");
-}
-
-static __inline__ int atomic_sub_return(int a, atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%2         # atomic_sub_return\n\
-        subf    %0,%1,%0\n"
-        PPC405_ERR77(0,%2)
-"       stwcx.  %0,0,%2 \n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (t)
-        : "r" (a), "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-static __inline__ void atomic_inc(atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-"1:     lwarx   %0,0,%2         # atomic_inc\n\
-        addic   %0,%0,1\n"
-        PPC405_ERR77(0,%2)
-"       stwcx.  %0,0,%2 \n\
-        bne-    1b"
-        : "=&r" (t), "+m" (v->counter)
-        : "r" (&v->counter)
-        : "cc");
-}
-
-static __inline__ int atomic_inc_return(atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%1         # atomic_inc_return\n\
-        addic   %0,%0,1\n"
-        PPC405_ERR77(0,%1)
-"       stwcx.  %0,0,%1 \n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (t)
-        : "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-static __inline__ void atomic_dec(atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-"1:     lwarx   %0,0,%2         # atomic_dec\n\
-        addic   %0,%0,-1\n"
-        PPC405_ERR77(0,%2)\
-"       stwcx.  %0,0,%2\n\
-        bne-    1b"
-        : "=&r" (t), "+m" (v->counter)
-        : "r" (&v->counter)
-        : "cc");
-}
-
-static __inline__ int atomic_dec_return(atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%1         # atomic_dec_return\n\
-        addic   %0,%0,-1\n"
-        PPC405_ERR77(0,%1)
-"       stwcx.  %0,0,%1\n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (t)
-        : "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/**
- * atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
-        int t;
-
-        __asm__ __volatile__ (
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%1         # atomic_add_unless\n\
-        cmpw    0,%0,%3 \n\
-        beq-    2f \n\
-        add     %0,%2,%0 \n"
-        PPC405_ERR77(0,%2)
-"       stwcx.  %0,0,%1 \n\
-        bne-    1b \n"
-        ISYNC_ON_SMP
-"       subf    %0,%2,%0 \n\
-2:"
-        : "=&r" (t)
-        : "r" (&v->counter), "r" (a), "r" (u)
-        : "cc", "memory");
-
-        return t != u;
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_sub_and_test(a, v)       (atomic_sub_return((a), (v)) == 0)
-#define atomic_dec_and_test(v)          (atomic_dec_return((v)) == 0)
-
-/*
- * Atomically test *v and decrement if it is greater than 0.
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
-static __inline__ int atomic_dec_if_positive(atomic_t *v)
-{
-        int t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%1         # atomic_dec_if_positive\n\
-        cmpwi   %0,1\n\
-        addi    %0,%0,-1\n\
-        blt-    2f\n"
-        PPC405_ERR77(0,%1)
-"       stwcx.  %0,0,%1\n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        "\n\
-2:"     : "=&b" (t)
-        : "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-#define smp_mb__before_atomic_dec()     smp_mb()
-#define smp_mb__after_atomic_dec()      smp_mb()
-#define smp_mb__before_atomic_inc()     smp_mb()
-#define smp_mb__after_atomic_inc()      smp_mb()
-
-#ifdef __powerpc64__
-
-typedef struct { long counter; } atomic64_t;
-
-#define ATOMIC64_INIT(i)        { (i) }
-
-static __inline__ long atomic64_read(const atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
-
-        return t;
-}
-
-static __inline__ void atomic64_set(atomic64_t *v, long i)
-{
-        __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
-}
-
-static __inline__ void atomic64_add(long a, atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:     ldarx   %0,0,%3         # atomic64_add\n\
-        add     %0,%2,%0\n\
-        stdcx.  %0,0,%3 \n\
-        bne-    1b"
-        : "=&r" (t), "+m" (v->counter)
-        : "r" (a), "r" (&v->counter)
-        : "cc");
-}
-
-static __inline__ long atomic64_add_return(long a, atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     ldarx   %0,0,%2         # atomic64_add_return\n\
-        add     %0,%1,%0\n\
-        stdcx.  %0,0,%2 \n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (t)
-        : "r" (a), "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-#define atomic64_add_negative(a, v)     (atomic64_add_return((a), (v)) < 0)
-
-static __inline__ void atomic64_sub(long a, atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:     ldarx   %0,0,%3         # atomic64_sub\n\
-        subf    %0,%2,%0\n\
-        stdcx.  %0,0,%3 \n\
-        bne-    1b"
-        : "=&r" (t), "+m" (v->counter)
-        : "r" (a), "r" (&v->counter)
-        : "cc");
-}
-
-static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     ldarx   %0,0,%2         # atomic64_sub_return\n\
-        subf    %0,%1,%0\n\
-        stdcx.  %0,0,%2 \n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (t)
-        : "r" (a), "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-static __inline__ void atomic64_inc(atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:     ldarx   %0,0,%2         # atomic64_inc\n\
-        addic   %0,%0,1\n\
-        stdcx.  %0,0,%2 \n\
-        bne-    1b"
-        : "=&r" (t), "+m" (v->counter)
-        : "r" (&v->counter)
-        : "cc");
-}
-
-static __inline__ long atomic64_inc_return(atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     ldarx   %0,0,%1         # atomic64_inc_return\n\
-        addic   %0,%0,1\n\
-        stdcx.  %0,0,%1 \n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (t)
-        : "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-/*
- * atomic64_inc_and_test - increment and test
- * @v: pointer of type atomic64_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
-
-static __inline__ void atomic64_dec(atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:     ldarx   %0,0,%2         # atomic64_dec\n\
-        addic   %0,%0,-1\n\
-        stdcx.  %0,0,%2\n\
-        bne-    1b"
-        : "=&r" (t), "+m" (v->counter)
-        : "r" (&v->counter)
-        : "cc");
-}
-
-static __inline__ long atomic64_dec_return(atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     ldarx   %0,0,%1         # atomic64_dec_return\n\
-        addic   %0,%0,-1\n\
-        stdcx.  %0,0,%1\n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (t)
-        : "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-#define atomic64_sub_and_test(a, v)     (atomic64_sub_return((a), (v)) == 0)
-#define atomic64_dec_and_test(v)        (atomic64_dec_return((v)) == 0)
-
-/*
- * Atomically test *v and decrement if it is greater than 0.
- * The function returns the old value of *v minus 1.
- */
-static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
-{
-        long t;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     ldarx   %0,0,%1         # atomic64_dec_if_positive\n\
-        addic.  %0,%0,-1\n\
-        blt-    2f\n\
-        stdcx.  %0,0,%1\n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        "\n\
-2:"     : "=&r" (t)
-        : "r" (&v->counter)
-        : "cc", "memory");
-
-        return t;
-}
-
-#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-/**
- * atomic64_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
-{
-        long t;
-
-        __asm__ __volatile__ (
-        LWSYNC_ON_SMP
-"1:     ldarx   %0,0,%1         # atomic_add_unless\n\
-        cmpd    0,%0,%3 \n\
-        beq-    2f \n\
-        add     %0,%2,%0 \n"
-"       stdcx.  %0,0,%1 \n\
-        bne-    1b \n"
-        ISYNC_ON_SMP
-"       subf    %0,%2,%0 \n\
-2:"
-        : "=&r" (t)
-        : "r" (&v->counter), "r" (a), "r" (u)
-        : "cc", "memory");
-
-        return t != u;
-}
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#endif /* __powerpc64__ */
-
-#include <asm-generic/atomic.h>
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_ATOMIC_H_ */
diff --git a/include/asm-powerpc/auxvec.h b/include/asm-powerpc/auxvec.h
deleted file mode 100644
index 19a099b62cd6..000000000000
--- a/include/asm-powerpc/auxvec.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_POWERPC_AUXVEC_H
-#define _ASM_POWERPC_AUXVEC_H
-
-/*
- * We need to put in some extra aux table entries to tell glibc what
- * the cache block size is, so it can use the dcbz instruction safely.
- */
-#define AT_DCACHEBSIZE          19
-#define AT_ICACHEBSIZE          20
-#define AT_UCACHEBSIZE          21
-/* A special ignored type value for PPC, for glibc compatibility.  */
-#define AT_IGNOREPPC            22
-
-/* The vDSO location. We have to use the same value as x86 for glibc's
- * sake :-)
- */
-#define AT_SYSINFO_EHDR         33
-
-#endif
diff --git a/include/asm-powerpc/backlight.h b/include/asm-powerpc/backlight.h
deleted file mode 100644
index 8cf5c37c3817..000000000000
--- a/include/asm-powerpc/backlight.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Routines for handling backlight control on PowerBooks
- *
- * For now, implementation resides in
- * arch/powerpc/platforms/powermac/backlight.c
- *
- */
-#ifndef __ASM_POWERPC_BACKLIGHT_H
-#define __ASM_POWERPC_BACKLIGHT_H
-#ifdef __KERNEL__
-
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-/* For locking instructions, see the implementation file */
-extern struct backlight_device *pmac_backlight;
-extern struct mutex pmac_backlight_mutex;
-
-extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
-
-extern int pmac_has_backlight_type(const char *type);
-
-extern void pmac_backlight_key(int direction);
-static inline void pmac_backlight_key_up(void)
-{
-        pmac_backlight_key(0);
-}
-static inline void pmac_backlight_key_down(void)
-{
-        pmac_backlight_key(1);
-}
-
-extern void pmac_backlight_set_legacy_brightness_pmu(int brightness);
-extern int pmac_backlight_set_legacy_brightness(int brightness);
-extern int pmac_backlight_get_legacy_brightness(void);
-
-extern void pmac_backlight_enable(void);
-extern void pmac_backlight_disable(void);
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h
deleted file mode 100644
index 897eade3afbe..000000000000
--- a/include/asm-powerpc/bitops.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * PowerPC atomic bit operations.
- *
- * Merged version by David Gibson <david@gibson.dropbear.id.au>.
- * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don
- * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard.  They
- * originally took it from the ppc32 code.
- *
- * Within a word, bits are numbered LSB first.  Lot's of places make
- * this assumption by directly testing bits with (val & (1<<nr)).
- * This can cause confusion for large (> 1 word) bitmaps on a
- * big-endian system because, unlike little endian, the number of each
- * bit depends on the word size.
- *
- * The bitop functions are defined to work on unsigned longs, so for a
- * ppc64 system the bits end up numbered:
- *   |63..............0|127............64|191...........128|255...........196|
- * and on ppc32:
- *   |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224|
- *
- * There are a few little-endian macros used mostly for filesystem
- * bitmaps, these work on similar bit arrays layouts, but
- * byte-oriented:
- *   |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
- *
- * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit
- * number field needs to be reversed compared to the big-endian bit
- * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b).
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_BITOPS_H
-#define _ASM_POWERPC_BITOPS_H
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <asm/asm-compat.h>
-#include <asm/synch.h>
-
-/*
- * clear_bit doesn't imply a memory barrier
- */
-#define smp_mb__before_clear_bit()      smp_mb()
-#define smp_mb__after_clear_bit()       smp_mb()
-
-#define BITOP_MASK(nr)          (1UL << ((nr) % BITS_PER_LONG))
-#define BITOP_WORD(nr)          ((nr) / BITS_PER_LONG)
-#define BITOP_LE_SWIZZLE        ((BITS_PER_LONG-1) & ~0x7)
-
-static __inline__ void set_bit(int nr, volatile unsigned long *addr)
-{
-        unsigned long old;
-        unsigned long mask = BITOP_MASK(nr);
-        unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX "%0,0,%3      # set_bit\n"
-        "or     %0,%0,%2\n"
-        PPC405_ERR77(0,%3)
-        PPC_STLCX "%0,0,%3\n"
-        "bne-   1b"
-        : "=&r" (old), "+m" (*p)
-        : "r" (mask), "r" (p)
-        : "cc" );
-}
-
-static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
-{
-        unsigned long old;
-        unsigned long mask = BITOP_MASK(nr);
-        unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX "%0,0,%3      # clear_bit\n"
-        "andc   %0,%0,%2\n"
-        PPC405_ERR77(0,%3)
-        PPC_STLCX "%0,0,%3\n"
-        "bne-   1b"
-        : "=&r" (old), "+m" (*p)
-        : "r" (mask), "r" (p)
-        : "cc" );
-}
-
-static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
-{
-        unsigned long old;
-        unsigned long mask = BITOP_MASK(nr);
-        unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:"    PPC_LLARX "%0,0,%3      # clear_bit_unlock\n"
-        "andc   %0,%0,%2\n"
-        PPC405_ERR77(0,%3)
-        PPC_STLCX "%0,0,%3\n"
-        "bne-   1b"
-        : "=&r" (old), "+m" (*p)
-        : "r" (mask), "r" (p)
-        : "cc", "memory");
-}
-
-static __inline__ void change_bit(int nr, volatile unsigned long *addr)
-{
-        unsigned long old;
-        unsigned long mask = BITOP_MASK(nr);
-        unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX "%0,0,%3      # change_bit\n"
-        "xor    %0,%0,%2\n"
-        PPC405_ERR77(0,%3)
-        PPC_STLCX "%0,0,%3\n"
-        "bne-   1b"
-        : "=&r" (old), "+m" (*p)
-        : "r" (mask), "r" (p)
-        : "cc" );
-}
-
-static __inline__ int test_and_set_bit(unsigned long nr,
-                                       volatile unsigned long *addr)
-{
-        unsigned long old, t;
-        unsigned long mask = BITOP_MASK(nr);
-        unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:"    PPC_LLARX "%0,0,%3              # test_and_set_bit\n"
-        "or     %1,%0,%2 \n"
-        PPC405_ERR77(0,%3)
-        PPC_STLCX "%1,0,%3 \n"
-        "bne-   1b"
-        ISYNC_ON_SMP
-        : "=&r" (old), "=&r" (t)
-        : "r" (mask), "r" (p)
-        : "cc", "memory");
-
-        return (old & mask) != 0;
-}
-
-static __inline__ int test_and_set_bit_lock(unsigned long nr,
-                                       volatile unsigned long *addr)
-{
-        unsigned long old, t;
-        unsigned long mask = BITOP_MASK(nr);
-        unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX "%0,0,%3              # test_and_set_bit_lock\n"
-        "or     %1,%0,%2 \n"
-        PPC405_ERR77(0,%3)
-        PPC_STLCX "%1,0,%3 \n"
-        "bne-   1b"
-        ISYNC_ON_SMP
-        : "=&r" (old), "=&r" (t)
-        : "r" (mask), "r" (p)
-        : "cc", "memory");
-
-        return (old & mask) != 0;
-}
-
-static __inline__ int test_and_clear_bit(unsigned long nr,
-                                         volatile unsigned long *addr)
-{
-        unsigned long old, t;
-        unsigned long mask = BITOP_MASK(nr);
-        unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:"    PPC_LLARX "%0,0,%3              # test_and_clear_bit\n"
-        "andc   %1,%0,%2 \n"
-        PPC405_ERR77(0,%3)
-        PPC_STLCX "%1,0,%3 \n"
-        "bne-   1b"
-        ISYNC_ON_SMP
-        : "=&r" (old), "=&r" (t)
-        : "r" (mask), "r" (p)
-        : "cc", "memory");
-
-        return (old & mask) != 0;
-}
-
-static __inline__ int test_and_change_bit(unsigned long nr,
-                                          volatile unsigned long *addr)
-{
-        unsigned long old, t;
-        unsigned long mask = BITOP_MASK(nr);
-        unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:"    PPC_LLARX "%0,0,%3              # test_and_change_bit\n"
-        "xor    %1,%0,%2 \n"
-        PPC405_ERR77(0,%3)
-        PPC_STLCX "%1,0,%3 \n"
-        "bne-   1b"
-        ISYNC_ON_SMP
-        : "=&r" (old), "=&r" (t)
-        : "r" (mask), "r" (p)
-        : "cc", "memory");
-
-        return (old & mask) != 0;
-}
-
-static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
-{
-        unsigned long old;
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX "%0,0,%3         # set_bits\n"
-        "or     %0,%0,%2\n"
-        PPC_STLCX "%0,0,%3\n"
-        "bne-   1b"
-        : "=&r" (old), "+m" (*addr)
-        : "r" (mask), "r" (addr)
-        : "cc");
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
-{
-        __asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory");
-        __clear_bit(nr, addr);
-}
-
-/*
- * Return the zero-based bit position (LE, not IBM bit numbering) of
- * the most significant 1-bit in a double word.
- */
-static __inline__ __attribute__((const))
-int __ilog2(unsigned long x)
-{
-        int lz;
-
-        asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x));
-        return BITS_PER_LONG - 1 - lz;
-}
-
-static inline __attribute__((const))
-int __ilog2_u32(u32 n)
-{
-        int bit;
-        asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n));
-        return 31 - bit;
-}
-
-#ifdef __powerpc64__
-static inline __attribute__((const))
-int __ilog2_u64(u64 n)
-{
-        int bit;
-        asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n));
-        return 63 - bit;
-}
-#endif
-
-/*
- * Determines the bit position of the least significant 0 bit in the
- * specified double word. The returned bit position will be
- * zero-based, starting from the right side (63/31 - 0).
- */
-static __inline__ unsigned long ffz(unsigned long x)
-{
-        /* no zero exists anywhere in the 8 byte area. */
-        if ((x = ~x) == 0)
-                return BITS_PER_LONG;
-
-        /*
-         * Calculate the bit position of the least signficant '1' bit in x
-         * (since x has been changed this will actually be the least signficant
-         * '0' bit in * the original x).  Note: (x & -x) gives us a mask that
-         * is the least significant * (RIGHT-most) 1-bit of the value in x.
-         */
-        return __ilog2(x & -x);
-}
-
-static __inline__ int __ffs(unsigned long x)
-{
-        return __ilog2(x & -x);
-}
-
-/*
- * ffs: find first bit set. This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-static __inline__ int ffs(int x)
-{
-        unsigned long i = (unsigned long)x;
-        return __ilog2(i & -i) + 1;
-}
-
-/*
- * fls: find last (most-significant) bit set.
- * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
- */
-static __inline__ int fls(unsigned int x)
-{
-        int lz;
-
-        asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
-        return 32 - lz;
-}
-
-static __inline__ unsigned long __fls(unsigned long x)
-{
-        return __ilog2(x);
-}
-
-/*
- * 64-bit can do this using one cntlzd (count leading zeroes doubleword)
- * instruction; for 32-bit we use the generic version, which does two
- * 32-bit fls calls.
- */
-#ifdef __powerpc64__
-static __inline__ int fls64(__u64 x)
-{
-        int lz;
-
-        asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x));
-        return 64 - lz;
-}
-#else
-#include <asm-generic/bitops/fls64.h>
-#endif /* __powerpc64__ */
-
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/find.h>
-
-/* Little-endian versions */
-
-static __inline__ int test_le_bit(unsigned long nr,
-                                  __const__ unsigned long *addr)
-{
-        __const__ unsigned char *tmp = (__const__ unsigned char *) addr;
-        return (tmp[nr >> 3] >> (nr & 7)) & 1;
-}
-
-#define __set_le_bit(nr, addr) \
-        __set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-#define __clear_le_bit(nr, addr) \
-        __clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-
-#define test_and_set_le_bit(nr, addr) \
-        test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-#define test_and_clear_le_bit(nr, addr) \
-        test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-
-#define __test_and_set_le_bit(nr, addr) \
-        __test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-#define __test_and_clear_le_bit(nr, addr) \
-        __test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-
-#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0)
-unsigned long generic_find_next_zero_le_bit(const unsigned long *addr,
-                                    unsigned long size, unsigned long offset);
-
-unsigned long generic_find_next_le_bit(const unsigned long *addr,
-                                    unsigned long size, unsigned long offset);
-/* Bitmap functions for the ext2 filesystem */
-
-#define ext2_set_bit(nr,addr) \
-        __test_and_set_le_bit((nr), (unsigned long*)addr)
-#define ext2_clear_bit(nr, addr) \
-        __test_and_clear_le_bit((nr), (unsigned long*)addr)
-
-#define ext2_set_bit_atomic(lock, nr, addr) \
-        test_and_set_le_bit((nr), (unsigned long*)addr)
-#define ext2_clear_bit_atomic(lock, nr, addr) \
-        test_and_clear_le_bit((nr), (unsigned long*)addr)
-
-#define ext2_test_bit(nr, addr)      test_le_bit((nr),(unsigned long*)addr)
-
-#define ext2_find_first_zero_bit(addr, size) \
-        find_first_zero_le_bit((unsigned long*)addr, size)
-#define ext2_find_next_zero_bit(addr, size, off) \
-        generic_find_next_zero_le_bit((unsigned long*)addr, size, off)
-
-#define ext2_find_next_bit(addr, size, off) \
-        generic_find_next_le_bit((unsigned long *)addr, size, off)
-/* Bitmap functions for the minix filesystem.  */
-
-#define minix_test_and_set_bit(nr,addr) \
-        __test_and_set_le_bit(nr, (unsigned long *)addr)
-#define minix_set_bit(nr,addr) \
-        __set_le_bit(nr, (unsigned long *)addr)
-#define minix_test_and_clear_bit(nr,addr) \
-        __test_and_clear_le_bit(nr, (unsigned long *)addr)
-#define minix_test_bit(nr,addr) \
-        test_le_bit(nr, (unsigned long *)addr)
-
-#define minix_find_first_zero_bit(addr,size) \
-        find_first_zero_le_bit((unsigned long *)addr, size)
-
-#include <asm-generic/bitops/sched.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_BITOPS_H */
diff --git a/include/asm-powerpc/bootx.h b/include/asm-powerpc/bootx.h
deleted file mode 100644
index 57b82e3f89ce..000000000000
--- a/include/asm-powerpc/bootx.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * This file describes the structure passed from the BootX application
- * (for MacOS) when it is used to boot Linux.
- *
- * Written by Benjamin Herrenschmidt.
- */
-
-
-#ifndef __ASM_BOOTX_H__
-#define __ASM_BOOTX_H__
-
-#include <asm/types.h>
-
-#ifdef macintosh
-#include <Types.h>
-#include "linux_type_defs.h"
-#endif
-
-#ifdef macintosh
-/* All this requires PowerPC alignment */
-#pragma options align=power
-#endif
-
-/* On kernel entry:
- *
- * r3 = 0x426f6f58    ('BooX')
- * r4 = pointer to boot_infos
- * r5 = NULL
- *
- * Data and instruction translation disabled, interrupts
- * disabled, kernel loaded at physical 0x00000000 on PCI
- * machines (will be different on NuBus).
- */
-
-#define BOOT_INFO_VERSION               5
-#define BOOT_INFO_COMPATIBLE_VERSION    1
-
-/* Bit in the architecture flag mask. More to be defined in
-   future versions. Note that either BOOT_ARCH_PCI or
-   BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
-   set additionally when BOOT_ARCH_NUBUS is set.
- */
-#define BOOT_ARCH_PCI                   0x00000001UL
-#define BOOT_ARCH_NUBUS                 0x00000002UL
-#define BOOT_ARCH_NUBUS_PDM             0x00000010UL
-#define BOOT_ARCH_NUBUS_PERFORMA        0x00000020UL
-#define BOOT_ARCH_NUBUS_POWERBOOK       0x00000040UL
-
-/*  Maximum number of ranges in phys memory map */
-#define MAX_MEM_MAP_SIZE                                26
-
-/* This is the format of an element in the physical memory map. Note that
-   the map is optional and current BootX will only build it for pre-PCI
-   machines */
-typedef struct boot_info_map_entry
-{
-    __u32       physAddr;                /* Physical starting address */
-    __u32       size;                    /* Size in bytes */
-} boot_info_map_entry_t;
-
-
-/* Here are the boot informations that are passed to the bootstrap
- * Note that the kernel arguments and the device tree are appended
- * at the end of this structure. */
-typedef struct boot_infos
-{
-    /* Version of this structure */
-    __u32       version;
-    /* backward compatible down to version: */
-    __u32       compatible_version;
-
-    /* NEW (vers. 2) this holds the current _logical_ base addr of
-       the frame buffer (for use by early boot message) */
-    __u8*       logicalDisplayBase;
-
-    /* NEW (vers. 4) Apple's machine identification */
-    __u32       machineID;
-
-    /* NEW (vers. 4) Detected hw architecture */
-    __u32       architecture;
-
-    /* The device tree (internal addresses relative to the beginning of the tree,
-     * device tree offset relative to the beginning of this structure).
-     * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
-     * field is 0.
-     */
-    __u32       deviceTreeOffset;        /* Device tree offset */
-    __u32       deviceTreeSize;          /* Size of the device tree */
-
-    /* Some infos about the current MacOS display */
-    __u32       dispDeviceRect[4];       /* left,top,right,bottom */
-    __u32       dispDeviceDepth;         /* (8, 16 or 32) */
-    __u8*       dispDeviceBase;          /* base address (physical) */
-    __u32       dispDeviceRowBytes;      /* rowbytes (in bytes) */
-    __u32       dispDeviceColorsOffset;  /* Colormap (8 bits only) or 0 (*) */
-    /* Optional offset in the registry to the current
-     * MacOS display. (Can be 0 when not detected) */
-     __u32      dispDeviceRegEntryOffset;
-
-    /* Optional pointer to boot ramdisk (offset from this structure) */
-    __u32       ramDisk;
-    __u32       ramDiskSize;             /* size of ramdisk image */
-
-    /* Kernel command line arguments (offset from this structure) */
-    __u32       kernelParamsOffset;
-
-    /* ALL BELOW NEW (vers. 4) */
-
-    /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
-       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
-       device-tree. */
-    boot_info_map_entry_t
-                physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
-    __u32       physMemoryMapSize;               /* How many entries in map */
-
-
-    /* The framebuffer size (optional, currently 0) */
-    __u32       frameBufferSize;         /* Represents a max size, can be 0. */
-
-    /* NEW (vers. 5) */
-
-    /* Total params size (args + colormap + device tree + ramdisk) */
-    __u32       totalParamsSize;
-
-} boot_infos_t;
-
-#ifdef __KERNEL__
-/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index
- * is represented by 3 short words containing a 16 bits (unsigned) color
- * component. Later versions may contain the gamma table for direct-color
- * devices here.
- */
-#define BOOTX_COLORTABLE_SIZE    (256UL*3UL*2UL)
-
-/* BootX passes the device-tree using a format that comes from earlier
- * ppc32 kernels. This used to match what is in prom.h, but not anymore
- * so we now define it here
- */
-struct bootx_dt_prop {
-        u32     name;
-        int     length;
-        u32     value;
-        u32     next;
-};
-
-struct bootx_dt_node {
-        u32     unused0;
-        u32     unused1;
-        u32     phandle;        /* not really available */
-        u32     unused2;
-        u32     unused3;
-        u32     unused4;
-        u32     unused5;
-        u32     full_name;
-        u32     properties;
-        u32     parent;
-        u32     child;
-        u32     sibling;
-        u32     next;
-        u32     allnext;
-};
-
-extern void bootx_init(unsigned long r4, unsigned long phys);
-
-#endif /* __KERNEL__ */
-
-#ifdef macintosh
-#pragma options align=reset
-#endif
-
-#endif
diff --git a/include/asm-powerpc/btext.h b/include/asm-powerpc/btext.h
deleted file mode 100644
index 906f46e31006..000000000000
--- a/include/asm-powerpc/btext.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Definitions for using the procedures in btext.c.
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- */
-#ifndef __PPC_BTEXT_H
-#define __PPC_BTEXT_H
-#ifdef __KERNEL__
-
-extern int btext_find_display(int allow_nonstdout);
-extern void btext_update_display(unsigned long phys, int width, int height,
-                                 int depth, int pitch);
-extern void btext_setup_display(int width, int height, int depth, int pitch,
-                                unsigned long address);
-extern void btext_prepare_BAT(void);
-extern void btext_unmap(void);
-
-extern void btext_drawchar(char c);
-extern void btext_drawstring(const char *str);
-extern void btext_drawhex(unsigned long v);
-extern void btext_drawtext(const char *c, unsigned int len);
-
-extern void btext_clearscreen(void);
-extern void btext_flushscreen(void);
-extern void btext_flushline(void);
-
-#endif /* __KERNEL__ */
-#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h
deleted file mode 100644
index e55d1f66b86f..000000000000
--- a/include/asm-powerpc/bug.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef _ASM_POWERPC_BUG_H
-#define _ASM_POWERPC_BUG_H
-#ifdef __KERNEL__
-
-#include <asm/asm-compat.h>
-/*
- * Define an illegal instr to trap on the bug.
- * We don't use 0 because that marks the end of a function
- * in the ELF ABI.  That's "Boo Boo" in case you wonder...
- */
-#define BUG_OPCODE .long 0x00b00b00  /* For asm */
-#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */
-
-#ifdef CONFIG_BUG
-
-#ifdef __ASSEMBLY__
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-.macro EMIT_BUG_ENTRY addr,file,line,flags
-         .section __bug_table,"a"
-5001:    PPC_LONG \addr, 5002f
-         .short \line, \flags
-         .org 5001b+BUG_ENTRY_SIZE
-         .previous
-         .section .rodata,"a"
-5002:    .asciz "\file"
-         .previous
-.endm
-#else
- .macro EMIT_BUG_ENTRY addr,file,line,flags
-         .section __bug_table,"a"
-5001:    PPC_LONG \addr
-         .short \flags
-         .org 5001b+BUG_ENTRY_SIZE
-         .previous
-.endm
-#endif /* verbose */
-
-#else /* !__ASSEMBLY__ */
-/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
-   sizeof(struct bug_entry), respectively */
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-#define _EMIT_BUG_ENTRY                         \
-        ".section __bug_table,\"a\"\n"          \
-        "2:\t" PPC_LONG "1b, %0\n"              \
-        "\t.short %1, %2\n"                     \
-        ".org 2b+%3\n"                          \
-        ".previous\n"
-#else
-#define _EMIT_BUG_ENTRY                         \
-        ".section __bug_table,\"a\"\n"          \
-        "2:\t" PPC_LONG "1b\n"                  \
-        "\t.short %2\n"                         \
-        ".org 2b+%3\n"                          \
-        ".previous\n"
-#endif
-
-/*
- * BUG_ON() and WARN_ON() do their best to cooperate with compile-time
- * optimisations. However depending on the complexity of the condition
- * some compiler versions may not produce optimal results.
- */
-
-#define BUG() do {                                              \
-        __asm__ __volatile__(                                   \
-                "1:     twi 31,0,0\n"                           \
-                _EMIT_BUG_ENTRY                                 \
-                : : "i" (__FILE__), "i" (__LINE__),             \
-                    "i" (0), "i"  (sizeof(struct bug_entry)));  \
-        for(;;) ;                                               \
-} while (0)
-
-#define BUG_ON(x) do {                                          \
-        if (__builtin_constant_p(x)) {                          \
-                if (x)                                          \
-                        BUG();                                  \
-        } else {                                                \
-                __asm__ __volatile__(                           \
-                "1:     "PPC_TLNEI"     %4,0\n"                 \
-                _EMIT_BUG_ENTRY                                 \
-                : : "i" (__FILE__), "i" (__LINE__), "i" (0),    \
-                  "i" (sizeof(struct bug_entry)),               \
-                  "r" ((__force long)(x)));                     \
-        }                                                       \
-} while (0)
-
-#define __WARN() do {                                           \
-        __asm__ __volatile__(                                   \
-                "1:     twi 31,0,0\n"                           \
-                _EMIT_BUG_ENTRY                                 \
-                : : "i" (__FILE__), "i" (__LINE__),             \
-                  "i" (BUGFLAG_WARNING),                        \
-                  "i" (sizeof(struct bug_entry)));              \
-} while (0)
-
-#define WARN_ON(x) ({                                           \
-        int __ret_warn_on = !!(x);                              \
-        if (__builtin_constant_p(__ret_warn_on)) {              \
-                if (__ret_warn_on)                              \
-                        __WARN();                               \
-        } else {                                                \
-                __asm__ __volatile__(                           \
-                "1:     "PPC_TLNEI"     %4,0\n"                 \
-                _EMIT_BUG_ENTRY                                 \
-                : : "i" (__FILE__), "i" (__LINE__),             \
-                  "i" (BUGFLAG_WARNING),                        \
-                  "i" (sizeof(struct bug_entry)),               \
-                  "r" (__ret_warn_on));                         \
-        }                                                       \
-        unlikely(__ret_warn_on);                                \
-})
-
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_BUG_ON
-#define HAVE_ARCH_WARN_ON
-#endif /* __ASSEMBLY __ */
-#endif /* CONFIG_BUG */
-
-#include <asm-generic/bug.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_BUG_H */
diff --git a/include/asm-powerpc/bugs.h b/include/asm-powerpc/bugs.h
deleted file mode 100644
index 42fdb73e3068..000000000000
--- a/include/asm-powerpc/bugs.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_POWERPC_BUGS_H
-#define _ASM_POWERPC_BUGS_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * This file is included by 'init/main.c' to check for
- * architecture-dependent bugs.
- */
-
-static inline void check_bugs(void) { }
-
-#endif  /* _ASM_POWERPC_BUGS_H */
diff --git a/include/asm-powerpc/byteorder.h b/include/asm-powerpc/byteorder.h
deleted file mode 100644
index b37752214a16..000000000000
--- a/include/asm-powerpc/byteorder.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _ASM_POWERPC_BYTEORDER_H
-#define _ASM_POWERPC_BYTEORDER_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#ifdef __GNUC__
-#ifdef __KERNEL__
-
-static __inline__ __u16 ld_le16(const volatile __u16 *addr)
-{
-        __u16 val;
-
-        __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
-        return val;
-}
-
-static __inline__ void st_le16(volatile __u16 *addr, const __u16 val)
-{
-        __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
-}
-
-static __inline__ __u32 ld_le32(const volatile __u32 *addr)
-{
-        __u32 val;
-
-        __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
-        return val;
-}
-
-static __inline__ void st_le32(volatile __u32 *addr, const __u32 val)
-{
-        __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
-}
-
-static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
-{
-        __u16 result;
-
-        __asm__("rlwimi %0,%1,8,16,23"
-            : "=r" (result)
-            : "r" (value), "0" (value >> 8));
-        return result;
-}
-
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
-{
-        __u32 result;
-
-        __asm__("rlwimi %0,%1,24,16,23\n\t"
-            "rlwimi %0,%1,8,8,15\n\t"
-            "rlwimi %0,%1,24,0,7"
-            : "=r" (result)
-            : "r" (value), "0" (value >> 24));
-        return result;
-}
-
-#define __arch__swab16(x) ___arch__swab16(x)
-#define __arch__swab32(x) ___arch__swab32(x)
-
-/* The same, but returns converted value from the location pointer by addr. */
-#define __arch__swab16p(addr) ld_le16(addr)
-#define __arch__swab32p(addr) ld_le32(addr)
-
-/* The same, but do the conversion in situ, ie. put the value back to addr. */
-#define __arch__swab16s(addr) st_le16(addr,*addr)
-#define __arch__swab32s(addr) st_le32(addr,*addr)
-
-#endif /* __KERNEL__ */
-
-#ifndef __STRICT_ANSI__
-#define __BYTEORDER_HAS_U64__
-#ifndef __powerpc64__
-#define __SWAB_64_THRU_32__
-#endif /* __powerpc64__ */
-#endif /* __STRICT_ANSI__ */
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _ASM_POWERPC_BYTEORDER_H */
diff --git a/include/asm-powerpc/cache.h b/include/asm-powerpc/cache.h
deleted file mode 100644
index 81de6eb3455d..000000000000
--- a/include/asm-powerpc/cache.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef _ASM_POWERPC_CACHE_H
-#define _ASM_POWERPC_CACHE_H
-
-#ifdef __KERNEL__
-
-
-/* bytes per L1 cache line */
-#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
-#define L1_CACHE_SHIFT          4
-#define MAX_COPY_PREFETCH       1
-#elif defined(CONFIG_PPC_E500MC)
-#define L1_CACHE_SHIFT          6
-#define MAX_COPY_PREFETCH       4
-#elif defined(CONFIG_PPC32)
-#define L1_CACHE_SHIFT          5
-#define MAX_COPY_PREFETCH       4
-#else /* CONFIG_PPC64 */
-#define L1_CACHE_SHIFT          7
-#endif
-
-#define L1_CACHE_BYTES          (1 << L1_CACHE_SHIFT)
-
-#define SMP_CACHE_BYTES         L1_CACHE_BYTES
-
-#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
-struct ppc64_caches {
-        u32     dsize;                  /* L1 d-cache size */
-        u32     dline_size;             /* L1 d-cache line size */
-        u32     log_dline_size;
-        u32     dlines_per_page;
-        u32     isize;                  /* L1 i-cache size */
-        u32     iline_size;             /* L1 i-cache line size */
-        u32     log_iline_size;
-        u32     ilines_per_page;
-};
-
-extern struct ppc64_caches ppc64_caches;
-#endif /* __powerpc64__ && ! __ASSEMBLY__ */
-
-#if !defined(__ASSEMBLY__)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_CACHE_H */
diff --git a/include/asm-powerpc/cacheflush.h b/include/asm-powerpc/cacheflush.h
deleted file mode 100644
index ba667a383b8c..000000000000
--- a/include/asm-powerpc/cacheflush.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_CACHEFLUSH_H
-#define _ASM_POWERPC_CACHEFLUSH_H
-
-#ifdef __KERNEL__
-
-#include <linux/mm.h>
-#include <asm/cputable.h>
-
-/*
- * No cache flushing is required when address mappings are changed,
- * because the caches on PowerPCs are physically addressed.
- */
-#define flush_cache_all()                       do { } while (0)
-#define flush_cache_mm(mm)                      do { } while (0)
-#define flush_cache_dup_mm(mm)                  do { } while (0)
-#define flush_cache_range(vma, start, end)      do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)      do { } while (0)
-#define flush_icache_page(vma, page)            do { } while (0)
-#define flush_cache_vmap(start, end)            do { } while (0)
-#define flush_cache_vunmap(start, end)          do { } while (0)
-
-extern void flush_dcache_page(struct page *page);
-#define flush_dcache_mmap_lock(mapping)         do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
-
-extern void __flush_icache_range(unsigned long, unsigned long);
-static inline void flush_icache_range(unsigned long start, unsigned long stop)
-{
-        if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
-                __flush_icache_range(start, stop);
-}
-
-extern void flush_icache_user_range(struct vm_area_struct *vma,
-                                    struct page *page, unsigned long addr,
-                                    int len);
-extern void __flush_dcache_icache(void *page_va);
-extern void flush_dcache_icache_page(struct page *page);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
-extern void __flush_dcache_icache_phys(unsigned long physaddr);
-#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
-
-extern void flush_dcache_range(unsigned long start, unsigned long stop);
-#ifdef CONFIG_PPC32
-extern void clean_dcache_range(unsigned long start, unsigned long stop);
-extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
-#endif /* CONFIG_PPC32 */
-#ifdef CONFIG_PPC64
-extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
-extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
-#endif
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-        do { \
-                memcpy(dst, src, len); \
-                flush_icache_user_range(vma, page, vaddr, len); \
-        } while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-        memcpy(dst, src, len)
-
-
-
-#ifdef CONFIG_DEBUG_PAGEALLOC
-/* internal debugging function */
-void kernel_map_pages(struct page *page, int numpages, int enable);
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_CACHEFLUSH_H */
diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h
deleted file mode 100644
index 8066eede3a0c..000000000000
--- a/include/asm-powerpc/cell-pmu.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Cell Broadband Engine Performance Monitor
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author:
- *   David Erb (djerb@us.ibm.com)
- *   Kevin Corry (kevcorry@us.ibm.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_CELL_PMU_H__
-#define __ASM_CELL_PMU_H__
-
-/* The Cell PMU has four hardware performance counters, which can be
- * configured as four 32-bit counters or eight 16-bit counters.
- */
-#define NR_PHYS_CTRS 4
-#define NR_CTRS      (NR_PHYS_CTRS * 2)
-
-/* Macros for the pm_control register. */
-#define CBE_PM_16BIT_CTR(ctr)              (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
-#define CBE_PM_ENABLE_PERF_MON             0x80000000
-#define CBE_PM_STOP_AT_MAX                 0x40000000
-#define CBE_PM_TRACE_MODE_GET(pm_control)  (((pm_control) >> 28) & 0x3)
-#define CBE_PM_TRACE_MODE_SET(mode)        (((mode)  & 0x3) << 28)
-#define CBE_PM_COUNT_MODE_SET(count)       (((count) & 0x3) << 18)
-#define CBE_PM_FREEZE_ALL_CTRS             0x00100000
-#define CBE_PM_ENABLE_EXT_TRACE            0x00008000
-
-/* Macros for the trace_address register. */
-#define CBE_PM_TRACE_BUF_FULL              0x00000800
-#define CBE_PM_TRACE_BUF_EMPTY             0x00000400
-#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)    ((ta) & 0x3ff)
-#define CBE_PM_TRACE_BUF_MAX_COUNT         0x400
-
-/* Macros for the pm07_control registers. */
-#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f)
-#define CBE_PM_CTR_INPUT_CONTROL           0x02000000
-#define CBE_PM_CTR_POLARITY                0x01000000
-#define CBE_PM_CTR_COUNT_CYCLES            0x00800000
-#define CBE_PM_CTR_ENABLE                  0x00400000
-#define PM07_CTR_INPUT_MUX(x)              (((x) & 0x3F) << 26)
-#define PM07_CTR_INPUT_CONTROL(x)          (((x) & 1) << 25)
-#define PM07_CTR_POLARITY(x)               (((x) & 1) << 24)
-#define PM07_CTR_COUNT_CYCLES(x)           (((x) & 1) << 23)
-#define PM07_CTR_ENABLE(x)                 (((x) & 1) << 22)
-
-/* Macros for the pm_status register. */
-#define CBE_PM_CTR_OVERFLOW_INTR(ctr)      (1 << (31 - ((ctr) & 7)))
-
-enum pm_reg_name {
-        group_control,
-        debug_bus_control,
-        trace_address,
-        ext_tr_timer,
-        pm_status,
-        pm_control,
-        pm_interval,
-        pm_start_stop,
-};
-
-/* Routines for reading/writing the PMU registers. */
-extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
-extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
-extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
-extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
-
-extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
-extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
-extern u32  cbe_read_pm(u32 cpu, enum pm_reg_name reg);
-extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
-
-extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
-extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
-
-extern void cbe_enable_pm(u32 cpu);
-extern void cbe_disable_pm(u32 cpu);
-
-extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
-
-extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
-extern void cbe_disable_pm_interrupts(u32 cpu);
-extern u32  cbe_get_and_clear_pm_interrupts(u32 cpu);
-extern void cbe_sync_irq(int node);
-
-#define CBE_COUNT_SUPERVISOR_MODE       0
-#define CBE_COUNT_HYPERVISOR_MODE       1
-#define CBE_COUNT_PROBLEM_MODE          2
-#define CBE_COUNT_ALL_MODES             3
-
-#endif /* __ASM_CELL_PMU_H__ */
diff --git a/include/asm-powerpc/cell-regs.h b/include/asm-powerpc/cell-regs.h
deleted file mode 100644
index fd6fd00434ef..000000000000
--- a/include/asm-powerpc/cell-regs.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cbe_regs.h
- *
- * This file is intended to hold the various register definitions for CBE
- * on-chip system devices (memory controller, IO controller, etc...)
- *
- * (C) Copyright IBM Corporation 2001,2006
- *
- * Authors: Maximino Aguilar (maguilar@us.ibm.com)
- *          David J. Erb (djerb@us.ibm.com)
- *
- * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
- */
-
-#ifndef CBE_REGS_H
-#define CBE_REGS_H
-
-#include <asm/cell-pmu.h>
-
-/*
- *
- * Some HID register definitions
- *
- */
-
-/* CBE specific HID0 bits */
-#define HID0_CBE_THERM_WAKEUP   0x0000020000000000ul
-#define HID0_CBE_SYSERR_WAKEUP  0x0000008000000000ul
-#define HID0_CBE_THERM_INT_EN   0x0000000400000000ul
-#define HID0_CBE_SYSERR_INT_EN  0x0000000200000000ul
-
-#define MAX_CBE         2
-
-/*
- *
- * Pervasive unit register definitions
- *
- */
-
-union spe_reg {
-        u64 val;
-        u8 spe[8];
-};
-
-union ppe_spe_reg {
-        u64 val;
-        struct {
-                u32 ppe;
-                u32 spe;
-        };
-};
-
-
-struct cbe_pmd_regs {
-        /* Debug Bus Control */
-        u64     pad_0x0000;                                     /* 0x0000 */
-
-        u64     group_control;                                  /* 0x0008 */
-
-        u8      pad_0x0010_0x00a8 [0x00a8 - 0x0010];            /* 0x0010 */
-
-        u64     debug_bus_control;                              /* 0x00a8 */
-
-        u8      pad_0x00b0_0x0100 [0x0100 - 0x00b0];            /* 0x00b0 */
-
-        u64     trace_aux_data;                                 /* 0x0100 */
-        u64     trace_buffer_0_63;                              /* 0x0108 */
-        u64     trace_buffer_64_127;                            /* 0x0110 */
-        u64     trace_address;                                  /* 0x0118 */
-        u64     ext_tr_timer;                                   /* 0x0120 */
-
-        u8      pad_0x0128_0x0400 [0x0400 - 0x0128];            /* 0x0128 */
-
-        /* Performance Monitor */
-        u64     pm_status;                                      /* 0x0400 */
-        u64     pm_control;                                     /* 0x0408 */
-        u64     pm_interval;                                    /* 0x0410 */
-        u64     pm_ctr[4];                                      /* 0x0418 */
-        u64     pm_start_stop;                                  /* 0x0438 */
-        u64     pm07_control[8];                                /* 0x0440 */
-
-        u8      pad_0x0480_0x0800 [0x0800 - 0x0480];            /* 0x0480 */
-
-        /* Thermal Sensor Registers */
-        union   spe_reg ts_ctsr1;                               /* 0x0800 */
-        u64     ts_ctsr2;                                       /* 0x0808 */
-        union   spe_reg ts_mtsr1;                               /* 0x0810 */
-        u64     ts_mtsr2;                                       /* 0x0818 */
-        union   spe_reg ts_itr1;                                /* 0x0820 */
-        u64     ts_itr2;                                        /* 0x0828 */
-        u64     ts_gitr;                                        /* 0x0830 */
-        u64     ts_isr;                                         /* 0x0838 */
-        u64     ts_imr;                                         /* 0x0840 */
-        union   spe_reg tm_cr1;                                 /* 0x0848 */
-        u64     tm_cr2;                                         /* 0x0850 */
-        u64     tm_simr;                                        /* 0x0858 */
-        union   ppe_spe_reg tm_tpr;                             /* 0x0860 */
-        union   spe_reg tm_str1;                                /* 0x0868 */
-        u64     tm_str2;                                        /* 0x0870 */
-        union   ppe_spe_reg tm_tsr;                             /* 0x0878 */
-
-        /* Power Management */
-        u64     pmcr;                                           /* 0x0880 */
-#define CBE_PMD_PAUSE_ZERO_CONTROL      0x10000
-        u64     pmsr;                                           /* 0x0888 */
-
-        /* Time Base Register */
-        u64     tbr;                                            /* 0x0890 */
-
-        u8      pad_0x0898_0x0c00 [0x0c00 - 0x0898];            /* 0x0898 */
-
-        /* Fault Isolation Registers */
-        u64     checkstop_fir;                                  /* 0x0c00 */
-        u64     recoverable_fir;                                /* 0x0c08 */
-        u64     spec_att_mchk_fir;                              /* 0x0c10 */
-        u32     fir_mode_reg;                                   /* 0x0c18 */
-        u8      pad_0x0c1c_0x0c20 [4];                          /* 0x0c1c */
-#define CBE_PMD_FIR_MODE_M8             0x00800
-        u64     fir_enable_mask;                                /* 0x0c20 */
-
-        u8      pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];            /* 0x0c28 */
-        u64     ras_esc_0;                                      /* 0x0ca8 */
-        u8      pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];            /* 0x0cb0 */
-};
-
-extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
-extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
-
-/*
- * PMU shadow registers
- *
- * Many of the registers in the performance monitoring unit are write-only,
- * so we need to save a copy of what we write to those registers.
- *
- * The actual data counters are read/write. However, writing to the counters
- * only takes effect if the PMU is enabled. Otherwise the value is stored in
- * a hardware latch until the next time the PMU is enabled. So we save a copy
- * of the counter values if we need to read them back while the PMU is
- * disabled. The counter_value_in_latch field is a bitmap indicating which
- * counters currently have a value waiting to be written.
- */
-
-struct cbe_pmd_shadow_regs {
-        u32 group_control;
-        u32 debug_bus_control;
-        u32 trace_address;
-        u32 ext_tr_timer;
-        u32 pm_status;
-        u32 pm_control;
-        u32 pm_interval;
-        u32 pm_start_stop;
-        u32 pm07_control[NR_CTRS];
-
-        u32 pm_ctr[NR_PHYS_CTRS];
-        u32 counter_value_in_latch;
-};
-
-extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
-extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
-
-/*
- *
- * IIC unit register definitions
- *
- */
-
-struct cbe_iic_pending_bits {
-        u32 data;
-        u8 flags;
-        u8 class;
-        u8 source;
-        u8 prio;
-};
-
-#define CBE_IIC_IRQ_VALID       0x80
-#define CBE_IIC_IRQ_IPI         0x40
-
-struct cbe_iic_thread_regs {
-        struct cbe_iic_pending_bits pending;
-        struct cbe_iic_pending_bits pending_destr;
-        u64 generate;
-        u64 prio;
-};
-
-struct cbe_iic_regs {
-        u8      pad_0x0000_0x0400[0x0400 - 0x0000];             /* 0x0000 */
-
-        /* IIC interrupt registers */
-        struct  cbe_iic_thread_regs thread[2];                  /* 0x0400 */
-
-        u64     iic_ir;                                         /* 0x0440 */
-#define CBE_IIC_IR_PRIO(x)      (((x) & 0xf) << 12)
-#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
-#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
-#define CBE_IIC_IR_IOC_0        0x0
-#define CBE_IIC_IR_IOC_1S       0xb
-#define CBE_IIC_IR_PT_0         0xe
-#define CBE_IIC_IR_PT_1         0xf
-
-        u64     iic_is;                                         /* 0x0448 */
-#define CBE_IIC_IS_PMI          0x2
-
-        u8      pad_0x0450_0x0500[0x0500 - 0x0450];             /* 0x0450 */
-
-        /* IOC FIR */
-        u64     ioc_fir_reset;                                  /* 0x0500 */
-        u64     ioc_fir_set;                                    /* 0x0508 */
-        u64     ioc_checkstop_enable;                           /* 0x0510 */
-        u64     ioc_fir_error_mask;                             /* 0x0518 */
-        u64     ioc_syserr_enable;                              /* 0x0520 */
-        u64     ioc_fir;                                        /* 0x0528 */
-
-        u8      pad_0x0530_0x1000[0x1000 - 0x0530];             /* 0x0530 */
-};
-
-extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
-extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
-
-
-struct cbe_mic_tm_regs {
-        u8      pad_0x0000_0x0040[0x0040 - 0x0000];             /* 0x0000 */
-
-        u64     mic_ctl_cnfg2;                                  /* 0x0040 */
-#define CBE_MIC_ENABLE_AUX_TRC          0x8000000000000000LL
-#define CBE_MIC_DISABLE_PWR_SAV_2       0x0200000000000000LL
-#define CBE_MIC_DISABLE_AUX_TRC_WRAP    0x0100000000000000LL
-#define CBE_MIC_ENABLE_AUX_TRC_INT      0x0080000000000000LL
-
-        u64     pad_0x0048;                                     /* 0x0048 */
-
-        u64     mic_aux_trc_base;                               /* 0x0050 */
-        u64     mic_aux_trc_max_addr;                           /* 0x0058 */
-        u64     mic_aux_trc_cur_addr;                           /* 0x0060 */
-        u64     mic_aux_trc_grf_addr;                           /* 0x0068 */
-        u64     mic_aux_trc_grf_data;                           /* 0x0070 */
-
-        u64     pad_0x0078;                                     /* 0x0078 */
-
-        u64     mic_ctl_cnfg_0;                                 /* 0x0080 */
-#define CBE_MIC_DISABLE_PWR_SAV_0       0x8000000000000000LL
-
-        u64     pad_0x0088;                                     /* 0x0088 */
-
-        u64     slow_fast_timer_0;                              /* 0x0090 */
-        u64     slow_next_timer_0;                              /* 0x0098 */
-
-        u8      pad_0x00a0_0x00f8[0x00f8 - 0x00a0];             /* 0x00a0 */
-        u64     mic_df_ecc_address_0;                           /* 0x00f8 */
-
-        u8      pad_0x0100_0x01b8[0x01b8 - 0x0100];             /* 0x0100 */
-        u64     mic_df_ecc_address_1;                           /* 0x01b8 */
-
-        u64     mic_ctl_cnfg_1;                                 /* 0x01c0 */
-#define CBE_MIC_DISABLE_PWR_SAV_1       0x8000000000000000LL
-
-        u64     pad_0x01c8;                                     /* 0x01c8 */
-
-        u64     slow_fast_timer_1;                              /* 0x01d0 */
-        u64     slow_next_timer_1;                              /* 0x01d8 */
-
-        u8      pad_0x01e0_0x0208[0x0208 - 0x01e0];             /* 0x01e0 */
-        u64     mic_exc;                                        /* 0x0208 */
-#define CBE_MIC_EXC_BLOCK_SCRUB         0x0800000000000000ULL
-#define CBE_MIC_EXC_FAST_SCRUB          0x0100000000000000ULL
-
-        u64     mic_mnt_cfg;                                    /* 0x0210 */
-#define CBE_MIC_MNT_CFG_CHAN_0_POP      0x0002000000000000ULL
-#define CBE_MIC_MNT_CFG_CHAN_1_POP      0x0004000000000000ULL
-
-        u64     mic_df_config;                                  /* 0x0218 */
-#define CBE_MIC_ECC_DISABLE_0           0x4000000000000000ULL
-#define CBE_MIC_ECC_REP_SINGLE_0        0x2000000000000000ULL
-#define CBE_MIC_ECC_DISABLE_1           0x0080000000000000ULL
-#define CBE_MIC_ECC_REP_SINGLE_1        0x0040000000000000ULL
-
-        u8      pad_0x0220_0x0230[0x0230 - 0x0220];             /* 0x0220 */
-        u64     mic_fir;                                        /* 0x0230 */
-#define CBE_MIC_FIR_ECC_SINGLE_0_ERR    0x0200000000000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_0_ERR     0x0100000000000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_1_ERR    0x0080000000000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_1_ERR     0x0040000000000000ULL
-#define CBE_MIC_FIR_ECC_ERR_MASK        0xffff000000000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_0_CTE    0x0000020000000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_0_CTE     0x0000010000000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_1_CTE    0x0000008000000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_1_CTE     0x0000004000000000ULL
-#define CBE_MIC_FIR_ECC_CTE_MASK        0x0000ffff00000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_0_RESET  0x0000000002000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_0_RESET   0x0000000001000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_1_RESET  0x0000000000800000ULL
-#define CBE_MIC_FIR_ECC_MULTI_1_RESET   0x0000000000400000ULL
-#define CBE_MIC_FIR_ECC_RESET_MASK      0x00000000ffff0000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_0_SET    0x0000000000000200ULL
-#define CBE_MIC_FIR_ECC_MULTI_0_SET     0x0000000000000100ULL
-#define CBE_MIC_FIR_ECC_SINGLE_1_SET    0x0000000000000080ULL
-#define CBE_MIC_FIR_ECC_MULTI_1_SET     0x0000000000000040ULL
-#define CBE_MIC_FIR_ECC_SET_MASK        0x000000000000ffffULL
-        u64     mic_fir_debug;                                  /* 0x0238 */
-
-        u8      pad_0x0240_0x1000[0x1000 - 0x0240];             /* 0x0240 */
-};
-
-extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
-extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
-
-/* some utility functions to deal with SMT */
-extern u32 cbe_get_hw_thread_id(int cpu);
-extern u32 cbe_cpu_to_node(int cpu);
-extern u32 cbe_node_to_cpu(int node);
-
-/* Init this module early */
-extern void cbe_regs_init(void);
-
-
-#endif /* CBE_REGS_H */
diff --git a/include/asm-powerpc/checksum.h b/include/asm-powerpc/checksum.h
deleted file mode 100644
index 7cdf358337cf..000000000000
--- a/include/asm-powerpc/checksum.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _ASM_POWERPC_CHECKSUM_H
-#define _ASM_POWERPC_CHECKSUM_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.  ihl is the number
- * of 32-bit words and is always >= 5.
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-                                        unsigned short len,
-                                        unsigned short proto,
-                                        __wsum sum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * Computes the checksum of a memory block at src, length len,
- * and adds in "sum" (32-bit), while copying the block to dst.
- * If an access exception occurs on src or dst, it stores -EFAULT
- * to *src_err or *dst_err respectively (if that pointer is not
- * NULL), and, for an error on src, zeroes the rest of dst.
- *
- * Like csum_partial, this must be called with even lengths,
- * except for the last fragment.
- */
-extern __wsum csum_partial_copy_generic(const void *src, void *dst,
-                                              int len, __wsum sum,
-                                              int *src_err, int *dst_err);
-/*
- * the same as csum_partial, but copies from src to dst while it
- * checksums.
- */
-#define csum_partial_copy_from_user(src, dst, len, sum, errp)   \
-        csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL)
-
-#define csum_partial_copy_nocheck(src, dst, len, sum)   \
-        csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
-
-
-/*
- * turns a 32-bit partial checksum (e.g. from csum_partial) into a
- * 1's complement 16-bit checksum.
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
-        unsigned int tmp;
-
-        /* swap the two 16-bit halves of sum */
-        __asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum));
-        /* if there is a carry from adding the two 16-bit halves,
-           it will carry from the lower half into the upper half,
-           giving us the correct sum in the upper half. */
-        return (__force __sum16)(~((__force u32)sum + tmp) >> 16);
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-        return csum_fold(csum_partial(buff, len, 0));
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-                                     unsigned short len,
-                                     unsigned short proto,
-                                     __wsum sum)
-{
-#ifdef __powerpc64__
-        unsigned long s = (__force u32)sum;
-
-        s += (__force u32)saddr;
-        s += (__force u32)daddr;
-        s += proto + len;
-        s += (s >> 32);
-        return (__force __wsum) s;
-#else
-    __asm__("\n\
-        addc %0,%0,%1 \n\
-        adde %0,%0,%2 \n\
-        adde %0,%0,%3 \n\
-        addze %0,%0 \n\
-        "
-        : "=r" (sum)
-        : "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum));
-        return sum;
-#endif
-}
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-powerpc/clk_interface.h b/include/asm-powerpc/clk_interface.h
deleted file mode 100644
index ab1882c1e176..000000000000
--- a/include/asm-powerpc/clk_interface.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_POWERPC_CLK_INTERFACE_H
-#define __ASM_POWERPC_CLK_INTERFACE_H
-
-#include <linux/clk.h>
-
-struct clk_interface {
-        struct clk*     (*clk_get)      (struct device *dev, const char *id);
-        int             (*clk_enable)   (struct clk *clk);
-        void            (*clk_disable)  (struct clk *clk);
-        unsigned long   (*clk_get_rate) (struct clk *clk);
-        void            (*clk_put)      (struct clk *clk);
-        long            (*clk_round_rate) (struct clk *clk, unsigned long rate);
-        int             (*clk_set_rate) (struct clk *clk, unsigned long rate);
-        int             (*clk_set_parent) (struct clk *clk, struct clk *parent);
-        struct clk*     (*clk_get_parent) (struct clk *clk);
-};
-
-extern struct clk_interface clk_functions;
-
-#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h
deleted file mode 100644
index 107d9b915e33..000000000000
--- a/include/asm-powerpc/code-patching.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _ASM_POWERPC_CODE_PATCHING_H
-#define _ASM_POWERPC_CODE_PATCHING_H
-
-/*
- * Copyright 2008, Michael Ellerman, IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/types.h>
-
-#define PPC_NOP_INSTR           0x60000000
-#define PPC_LWSYNC_INSTR        0x7c2004ac
-
-/* Flags for create_branch:
- * "b"   == create_branch(addr, target, 0);
- * "ba"  == create_branch(addr, target, BRANCH_ABSOLUTE);
- * "bl"  == create_branch(addr, target, BRANCH_SET_LINK);
- * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK);
- */
-#define BRANCH_SET_LINK 0x1
-#define BRANCH_ABSOLUTE 0x2
-
-unsigned int create_branch(const unsigned int *addr,
-                           unsigned long target, int flags);
-unsigned int create_cond_branch(const unsigned int *addr,
-                                unsigned long target, int flags);
-void patch_branch(unsigned int *addr, unsigned long target, int flags);
-void patch_instruction(unsigned int *addr, unsigned int instr);
-
-int instr_is_relative_branch(unsigned int instr);
-int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr);
-unsigned long branch_target(const unsigned int *instr);
-unsigned int translate_branch(const unsigned int *dest,
-                              const unsigned int *src);
-
-static inline unsigned long ppc_function_entry(void *func)
-{
-#ifdef CONFIG_PPC64
-        /*
-         * On PPC64 the function pointer actually points to the function's
-         * descriptor. The first entry in the descriptor is the address
-         * of the function text.
-         */
-        return ((func_descr_t *)func)->entry;
-#else
-        return (unsigned long)func;
-#endif
-}
-
-#endif /* _ASM_POWERPC_CODE_PATCHING_H */
diff --git a/include/asm-powerpc/compat.h b/include/asm-powerpc/compat.h
deleted file mode 100644
index d811a8cd7b58..000000000000
--- a/include/asm-powerpc/compat.h
+++ /dev/null
@@ -1,214 +0,0 @@
-#ifndef _ASM_POWERPC_COMPAT_H
-#define _ASM_POWERPC_COMPAT_H
-#ifdef __KERNEL__
-/*
- * Architecture specific compatibility types
- */
-#include <linux/types.h>
-#include <linux/sched.h>
-
-#define COMPAT_USER_HZ  100
-
-typedef u32             compat_size_t;
-typedef s32             compat_ssize_t;
-typedef s32             compat_time_t;
-typedef s32             compat_clock_t;
-typedef s32             compat_pid_t;
-typedef u32             __compat_uid_t;
-typedef u32             __compat_gid_t;
-typedef u32             __compat_uid32_t;
-typedef u32             __compat_gid32_t;
-typedef u32             compat_mode_t;
-typedef u32             compat_ino_t;
-typedef u32             compat_dev_t;
-typedef s32             compat_off_t;
-typedef s64             compat_loff_t;
-typedef s16             compat_nlink_t;
-typedef u16             compat_ipc_pid_t;
-typedef s32             compat_daddr_t;
-typedef u32             compat_caddr_t;
-typedef __kernel_fsid_t compat_fsid_t;
-typedef s32             compat_key_t;
-typedef s32             compat_timer_t;
-
-typedef s32             compat_int_t;
-typedef s32             compat_long_t;
-typedef s64             compat_s64;
-typedef u32             compat_uint_t;
-typedef u32             compat_ulong_t;
-typedef u64             compat_u64;
-
-struct compat_timespec {
-        compat_time_t   tv_sec;
-        s32             tv_nsec;
-};
-
-struct compat_timeval {
-        compat_time_t   tv_sec;
-        s32             tv_usec;
-};
-
-struct compat_stat {
-        compat_dev_t    st_dev;
-        compat_ino_t    st_ino;
-        compat_mode_t   st_mode;
-        compat_nlink_t  st_nlink;
-        __compat_uid32_t        st_uid;
-        __compat_gid32_t        st_gid;
-        compat_dev_t    st_rdev;
-        compat_off_t    st_size;
-        compat_off_t    st_blksize;
-        compat_off_t    st_blocks;
-        compat_time_t   st_atime;
-        u32             st_atime_nsec;
-        compat_time_t   st_mtime;
-        u32             st_mtime_nsec;
-        compat_time_t   st_ctime;
-        u32             st_ctime_nsec;
-        u32             __unused4[2];
-};
-
-struct compat_flock {
-        short           l_type;
-        short           l_whence;
-        compat_off_t    l_start;
-        compat_off_t    l_len;
-        compat_pid_t    l_pid;
-};
-
-#define F_GETLK64       12      /*  using 'struct flock64' */
-#define F_SETLK64       13
-#define F_SETLKW64      14
-
-struct compat_flock64 {
-        short           l_type;
-        short           l_whence;
-        compat_loff_t   l_start;
-        compat_loff_t   l_len;
-        compat_pid_t    l_pid;
-};
-
-struct compat_statfs {
-        int             f_type;
-        int             f_bsize;
-        int             f_blocks;
-        int             f_bfree;
-        int             f_bavail;
-        int             f_files;
-        int             f_ffree;
-        compat_fsid_t   f_fsid;
-        int             f_namelen;      /* SunOS ignores this field. */
-        int             f_frsize;
-        int             f_spare[5];
-};
-
-#define COMPAT_RLIM_OLD_INFINITY        0x7fffffff
-#define COMPAT_RLIM_INFINITY            0xffffffff
-
-typedef u32             compat_old_sigset_t;
-
-#define _COMPAT_NSIG            64
-#define _COMPAT_NSIG_BPW        32
-
-typedef u32             compat_sigset_word;
-
-#define COMPAT_OFF_T_MAX        0x7fffffff
-#define COMPAT_LOFF_T_MAX       0x7fffffffffffffffL
-
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-typedef u32             compat_uptr_t;
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-        return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-        return (u32)(unsigned long)uptr;
-}
-
-static inline void __user *compat_alloc_user_space(long len)
-{
-        struct pt_regs *regs = current->thread.regs;
-        unsigned long usp = regs->gpr[1];
-
-        /*
-         * We cant access below the stack pointer in the 32bit ABI and
-         * can access 288 bytes in the 64bit ABI
-         */
-        if (!(test_thread_flag(TIF_32BIT)))
-                usp -= 288;
-
-        return (void __user *) (usp - len);
-}
-
-/*
- * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
- * it we may as well define it.
- */
-struct compat_ipc64_perm {
-        compat_key_t key;
-        __compat_uid_t uid;
-        __compat_gid_t gid;
-        __compat_uid_t cuid;
-        __compat_gid_t cgid;
-        compat_mode_t mode;
-        unsigned int seq;
-        unsigned int __pad2;
-        unsigned long __unused1;        /* yes they really are 64bit pads */
-        unsigned long __unused2;
-};
-
-struct compat_semid64_ds {
-        struct compat_ipc64_perm sem_perm;
-        unsigned int __unused1;
-        compat_time_t sem_otime;
-        unsigned int __unused2;
-        compat_time_t sem_ctime;
-        compat_ulong_t sem_nsems;
-        compat_ulong_t __unused3;
-        compat_ulong_t __unused4;
-};
-
-struct compat_msqid64_ds {
-        struct compat_ipc64_perm msg_perm;
-        unsigned int __unused1;
-        compat_time_t msg_stime;
-        unsigned int __unused2;
-        compat_time_t msg_rtime;
-        unsigned int __unused3;
-        compat_time_t msg_ctime;
-        compat_ulong_t msg_cbytes;
-        compat_ulong_t msg_qnum;
-        compat_ulong_t msg_qbytes;
-        compat_pid_t msg_lspid;
-        compat_pid_t msg_lrpid;
-        compat_ulong_t __unused4;
-        compat_ulong_t __unused5;
-};
-
-struct compat_shmid64_ds {
-        struct compat_ipc64_perm shm_perm;
-        unsigned int __unused1;
-        compat_time_t shm_atime;
-        unsigned int __unused2;
-        compat_time_t shm_dtime;
-        unsigned int __unused3;
-        compat_time_t shm_ctime;
-        unsigned int __unused4;
-        compat_size_t shm_segsz;
-        compat_pid_t shm_cpid;
-        compat_pid_t shm_lpid;
-        compat_ulong_t shm_nattch;
-        compat_ulong_t __unused5;
-        compat_ulong_t __unused6;
-};
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_COMPAT_H */
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
deleted file mode 100644
index 24d79e3abd8e..000000000000
--- a/include/asm-powerpc/cpm.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef __CPM_H
-#define __CPM_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/of.h>
-
-/* Opcodes common to CPM1 and CPM2
-*/
-#define CPM_CR_INIT_TRX         ((ushort)0x0000)
-#define CPM_CR_INIT_RX          ((ushort)0x0001)
-#define CPM_CR_INIT_TX          ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE        ((ushort)0x0003)
-#define CPM_CR_STOP_TX          ((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX      ((ushort)0x0005)
-#define CPM_CR_RESTART_TX       ((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD      ((ushort)0x0007)
-#define CPM_CR_SET_GADDR        ((ushort)0x0008)
-#define CPM_CR_SET_TIMER        ((ushort)0x0008)
-#define CPM_CR_STOP_IDMA        ((ushort)0x000b)
-
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
-        ushort  cbd_sc;         /* Status and Control */
-        ushort  cbd_datlen;     /* Data length in buffer */
-        uint    cbd_bufaddr;    /* Buffer address in host memory */
-} cbd_t;
-
-/* Buffer descriptor control/status used by serial
- */
-
-#define BD_SC_EMPTY     (0x8000)        /* Receive is empty */
-#define BD_SC_READY     (0x8000)        /* Transmit is ready */
-#define BD_SC_WRAP      (0x2000)        /* Last buffer descriptor */
-#define BD_SC_INTRPT    (0x1000)        /* Interrupt on change */
-#define BD_SC_LAST      (0x0800)        /* Last buffer in frame */
-#define BD_SC_TC        (0x0400)        /* Transmit CRC */
-#define BD_SC_CM        (0x0200)        /* Continous mode */
-#define BD_SC_ID        (0x0100)        /* Rec'd too many idles */
-#define BD_SC_P         (0x0100)        /* xmt preamble */
-#define BD_SC_BR        (0x0020)        /* Break received */
-#define BD_SC_FR        (0x0010)        /* Framing error */
-#define BD_SC_PR        (0x0008)        /* Parity error */
-#define BD_SC_NAK       (0x0004)        /* NAK - did not respond */
-#define BD_SC_OV        (0x0002)        /* Overrun */
-#define BD_SC_UN        (0x0002)        /* Underrun */
-#define BD_SC_CD        (0x0001)        /* */
-#define BD_SC_CL        (0x0001)        /* Collision */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY        (0x8000)
-#define BD_ENET_RX_WRAP         (0x2000)
-#define BD_ENET_RX_INTR         (0x1000)
-#define BD_ENET_RX_LAST         (0x0800)
-#define BD_ENET_RX_FIRST        (0x0400)
-#define BD_ENET_RX_MISS         (0x0100)
-#define BD_ENET_RX_BC           (0x0080)        /* FCC Only */
-#define BD_ENET_RX_MC           (0x0040)        /* FCC Only */
-#define BD_ENET_RX_LG           (0x0020)
-#define BD_ENET_RX_NO           (0x0010)
-#define BD_ENET_RX_SH           (0x0008)
-#define BD_ENET_RX_CR           (0x0004)
-#define BD_ENET_RX_OV           (0x0002)
-#define BD_ENET_RX_CL           (0x0001)
-#define BD_ENET_RX_STATS        (0x01ff)        /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY        (0x8000)
-#define BD_ENET_TX_PAD          (0x4000)
-#define BD_ENET_TX_WRAP         (0x2000)
-#define BD_ENET_TX_INTR         (0x1000)
-#define BD_ENET_TX_LAST         (0x0800)
-#define BD_ENET_TX_TC           (0x0400)
-#define BD_ENET_TX_DEF          (0x0200)
-#define BD_ENET_TX_HB           (0x0100)
-#define BD_ENET_TX_LC           (0x0080)
-#define BD_ENET_TX_RL           (0x0040)
-#define BD_ENET_TX_RCMASK       (0x003c)
-#define BD_ENET_TX_UN           (0x0002)
-#define BD_ENET_TX_CSL          (0x0001)
-#define BD_ENET_TX_STATS        (0x03ff)        /* All status bits */
-
-/* Buffer descriptor control/status used by Transparent mode SCC.
- */
-#define BD_SCC_TX_LAST          (0x0800)
-
-/* Buffer descriptor control/status used by I2C.
- */
-#define BD_I2C_START            (0x0400)
-
-int cpm_muram_init(void);
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
-void __iomem *cpm_muram_addr(unsigned long offset);
-unsigned long cpm_muram_offset(void __iomem *addr);
-dma_addr_t cpm_muram_dma(void __iomem *addr);
-int cpm_command(u32 command, u8 opcode);
-
-int cpm2_gpiochip_add32(struct device_node *np);
-
-#endif
diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h
deleted file mode 100644
index 2ff798744c1d..000000000000
--- a/include/asm-powerpc/cpm1.h
+++ /dev/null
@@ -1,652 +0,0 @@
-/*
- * MPC8xx Communication Processor Module.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * This file contains structures and information for the communication
- * processor channels.  Some CPM control and status is available
- * throught the MPC8xx internal memory map.  See immap.h for details.
- * This file only contains what I need for the moment, not the total
- * CPM capabilities.  I (or someone else) will add definitions as they
- * are needed.  -- Dan
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM1__
-#define __CPM1__
-
-#include <asm/8xx_immap.h>
-#include <asm/ptrace.h>
-#include <asm/cpm.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST      ((ushort)0x8000)
-#define CPM_CR_OPCODE   ((ushort)0x0f00)
-#define CPM_CR_CHAN     ((ushort)0x00f0)
-#define CPM_CR_FLG      ((ushort)0x0001)
-
-/* Channel numbers.
-*/
-#define CPM_CR_CH_SCC1          ((ushort)0x0000)
-#define CPM_CR_CH_I2C           ((ushort)0x0001)        /* I2C and IDMA1 */
-#define CPM_CR_CH_SCC2          ((ushort)0x0004)
-#define CPM_CR_CH_SPI           ((ushort)0x0005)        /* SPI / IDMA2 / Timers */
-#define CPM_CR_CH_TIMER         CPM_CR_CH_SPI
-#define CPM_CR_CH_SCC3          ((ushort)0x0008)
-#define CPM_CR_CH_SMC1          ((ushort)0x0009)        /* SMC1 / DSP1 */
-#define CPM_CR_CH_SCC4          ((ushort)0x000c)
-#define CPM_CR_CH_SMC2          ((ushort)0x000d)        /* SMC2 / DSP2 */
-
-#define mk_cr_cmd(CH, CMD)      ((CMD << 8) | (CH << 4))
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
-
-#define cpm_dpalloc cpm_muram_alloc
-#define cpm_dpfree cpm_muram_free
-#define cpm_dpram_addr cpm_muram_addr
-#define cpm_dpram_phys cpm_muram_dma
-
-extern void cpm_setbrg(uint brg, uint rate);
-
-extern void cpm_load_patch(cpm8xx_t *cp);
-
-extern void cpm_reset(void);
-
-/* Parameter RAM offsets.
-*/
-#define PROFF_SCC1      ((uint)0x0000)
-#define PROFF_IIC       ((uint)0x0080)
-#define PROFF_SCC2      ((uint)0x0100)
-#define PROFF_SPI       ((uint)0x0180)
-#define PROFF_SCC3      ((uint)0x0200)
-#define PROFF_SMC1      ((uint)0x0280)
-#define PROFF_SCC4      ((uint)0x0300)
-#define PROFF_SMC2      ((uint)0x0380)
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
-        ushort  smc_rbase;      /* Rx Buffer descriptor base address */
-        ushort  smc_tbase;      /* Tx Buffer descriptor base address */
-        u_char  smc_rfcr;       /* Rx function code */
-        u_char  smc_tfcr;       /* Tx function code */
-        ushort  smc_mrblr;      /* Max receive buffer length */
-        uint    smc_rstate;     /* Internal */
-        uint    smc_idp;        /* Internal */
-        ushort  smc_rbptr;      /* Internal */
-        ushort  smc_ibc;        /* Internal */
-        uint    smc_rxtmp;      /* Internal */
-        uint    smc_tstate;     /* Internal */
-        uint    smc_tdp;        /* Internal */
-        ushort  smc_tbptr;      /* Internal */
-        ushort  smc_tbc;        /* Internal */
-        uint    smc_txtmp;      /* Internal */
-        ushort  smc_maxidl;     /* Maximum idle characters */
-        ushort  smc_tmpidl;     /* Temporary idle counter */
-        ushort  smc_brklen;     /* Last received break length */
-        ushort  smc_brkec;      /* rcv'd break condition counter */
-        ushort  smc_brkcr;      /* xmt break count register */
-        ushort  smc_rmask;      /* Temporary bit mask */
-        char    res1[8];        /* Reserved */
-        ushort  smc_rpbase;     /* Relocation pointer */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB  ((u_char)0x10)  /* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define SMCMR_REN       ((ushort)0x0001)
-#define SMCMR_TEN       ((ushort)0x0002)
-#define SMCMR_DM        ((ushort)0x000c)
-#define SMCMR_SM_GCI    ((ushort)0x0000)
-#define SMCMR_SM_UART   ((ushort)0x0020)
-#define SMCMR_SM_TRANS  ((ushort)0x0030)
-#define SMCMR_SM_MASK   ((ushort)0x0030)
-#define SMCMR_PM_EVEN   ((ushort)0x0100)        /* Even parity, else odd */
-#define SMCMR_REVD      SMCMR_PM_EVEN
-#define SMCMR_PEN       ((ushort)0x0200)        /* Parity enable */
-#define SMCMR_BS        SMCMR_PEN
-#define SMCMR_SL        ((ushort)0x0400)        /* Two stops, else one */
-#define SMCR_CLEN_MASK  ((ushort)0x7800)        /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer.  It is half duplex, in that
- * it can only receive or transmit.  The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
-        ushort  scent_rbase;
-        ushort  scent_tbase;
-        u_char  scent_cfcr;
-        u_char  scent_smask;
-        ushort  scent_mrblr;
-        uint    scent_rstate;
-        uint    scent_r_ptr;
-        ushort  scent_rbptr;
-        ushort  scent_r_cnt;
-        uint    scent_rtemp;
-        uint    scent_tstate;
-        uint    scent_t_ptr;
-        ushort  scent_tbptr;
-        ushort  scent_t_cnt;
-        uint    scent_ttemp;
-        ushort  scent_max_sl;
-        ushort  scent_sl_cnt;
-        ushort  scent_character1;
-        ushort  scent_character2;
-        ushort  scent_character3;
-        ushort  scent_character4;
-        ushort  scent_character5;
-        ushort  scent_character6;
-        ushort  scent_character7;
-        ushort  scent_character8;
-        ushort  scent_rccm;
-        ushort  scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F      ((u_char)0x08)
-#define SMC_CENT_PE     ((u_char)0x04)
-#define SMC_CENT_S      ((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
-#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
-#define SMCM_TXE        ((unsigned char)0x10)   /* When in Transparent Mode */
-#define SMCM_BSY        ((unsigned char)0x04)
-#define SMCM_TX         ((unsigned char)0x02)
-#define SMCM_RX         ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST             ((uint)0x00020000)
-#define CPM_BRG_EN              ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2       ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6       ((uint)0x00008000)
-#define CPM_BRG_ATB             ((uint)0x00002000)
-#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
-#define CPM_BRG_DIV16           ((uint)0x00000001)
-
-/* SI Clock Route Register
-*/
-#define SICR_RCLK_SCC1_BRG1     ((uint)0x00000000)
-#define SICR_TCLK_SCC1_BRG1     ((uint)0x00000000)
-#define SICR_RCLK_SCC2_BRG2     ((uint)0x00000800)
-#define SICR_TCLK_SCC2_BRG2     ((uint)0x00000100)
-#define SICR_RCLK_SCC3_BRG3     ((uint)0x00100000)
-#define SICR_TCLK_SCC3_BRG3     ((uint)0x00020000)
-#define SICR_RCLK_SCC4_BRG4     ((uint)0x18000000)
-#define SICR_TCLK_SCC4_BRG4     ((uint)0x03000000)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP           ((uint)0x00040000)
-#define SCC_GSMRH_GDE           ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT    ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC   ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC     ((uint)0x00000000)
-#define SCC_GSMRH_REVD          ((uint)0x00002000)
-#define SCC_GSMRH_TRX           ((uint)0x00001000)
-#define SCC_GSMRH_TTX           ((uint)0x00000800)
-#define SCC_GSMRH_CDP           ((uint)0x00000400)
-#define SCC_GSMRH_CTSP          ((uint)0x00000200)
-#define SCC_GSMRH_CDS           ((uint)0x00000100)
-#define SCC_GSMRH_CTSS          ((uint)0x00000080)
-#define SCC_GSMRH_TFL           ((uint)0x00000040)
-#define SCC_GSMRH_RFW           ((uint)0x00000020)
-#define SCC_GSMRH_TXSY          ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16        ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8         ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4         ((uint)0x00000004)
-#define SCC_GSMRH_RTSM          ((uint)0x00000002)
-#define SCC_GSMRH_RSYN          ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR           ((uint)0x80000000)      /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE     ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG      ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS      ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH     ((uint)0x00000000)
-#define SCC_GSMRL_TCI           ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3        ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4        ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14       ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF      ((uint)0x00000000)
-#define SCC_GSMRL_RINV          ((uint)0x02000000)
-#define SCC_GSMRL_TINV          ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128       ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64        ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48        ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32        ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16        ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8         ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE      ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1      ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01        ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10        ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS     ((uint)0x00000000)
-#define SCC_GSMRL_TEND          ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32       ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16       ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8        ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1        ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32       ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16       ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8        ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1        ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN    ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH    ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0      ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI     ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ      ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN    ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH    ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0      ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI     ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ      ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE       ((uint)0x000000c0)      /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO     ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP     ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM     ((uint)0x00000000)
-#define SCC_GSMRL_ENR           ((uint)0x00000020)
-#define SCC_GSMRL_ENT           ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET     ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_QMC      ((uint)0x0000000a)
-#define SCC_GSMRL_MODE_DDCMP    ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC   ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14      ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC    ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART     ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7      ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK    ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC     ((uint)0x00000000)
-
-#define SCC_TODR_TOD            ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE        ((unsigned char)0x10)
-#define SCCM_BSY        ((unsigned char)0x04)
-#define SCCM_TX         ((unsigned char)0x02)
-#define SCCM_RX         ((unsigned char)0x01)
-
-typedef struct scc_param {
-        ushort  scc_rbase;      /* Rx Buffer descriptor base address */
-        ushort  scc_tbase;      /* Tx Buffer descriptor base address */
-        u_char  scc_rfcr;       /* Rx function code */
-        u_char  scc_tfcr;       /* Tx function code */
-        ushort  scc_mrblr;      /* Max receive buffer length */
-        uint    scc_rstate;     /* Internal */
-        uint    scc_idp;        /* Internal */
-        ushort  scc_rbptr;      /* Internal */
-        ushort  scc_ibc;        /* Internal */
-        uint    scc_rxtmp;      /* Internal */
-        uint    scc_tstate;     /* Internal */
-        uint    scc_tdp;        /* Internal */
-        ushort  scc_tbptr;      /* Internal */
-        ushort  scc_tbc;        /* Internal */
-        uint    scc_txtmp;      /* Internal */
-        uint    scc_rcrc;       /* Internal */
-        uint    scc_tcrc;       /* Internal */
-} sccp_t;
-
-/* Function code bits.
-*/
-#define SCC_EB  ((u_char)0x10)  /* Set big endian byte order */
-
-/* CPM Ethernet through SCCx.
- */
-typedef struct scc_enet {
-        sccp_t  sen_genscc;
-        uint    sen_cpres;      /* Preset CRC */
-        uint    sen_cmask;      /* Constant mask for CRC */
-        uint    sen_crcec;      /* CRC Error counter */
-        uint    sen_alec;       /* alignment error counter */
-        uint    sen_disfc;      /* discard frame counter */
-        ushort  sen_pads;       /* Tx short frame pad character */
-        ushort  sen_retlim;     /* Retry limit threshold */
-        ushort  sen_retcnt;     /* Retry limit counter */
-        ushort  sen_maxflr;     /* maximum frame length register */
-        ushort  sen_minflr;     /* minimum frame length register */
-        ushort  sen_maxd1;      /* maximum DMA1 length */
-        ushort  sen_maxd2;      /* maximum DMA2 length */
-        ushort  sen_maxd;       /* Rx max DMA */
-        ushort  sen_dmacnt;     /* Rx DMA counter */
-        ushort  sen_maxb;       /* Max BD byte count */
-        ushort  sen_gaddr1;     /* Group address filter */
-        ushort  sen_gaddr2;
-        ushort  sen_gaddr3;
-        ushort  sen_gaddr4;
-        uint    sen_tbuf0data0; /* Save area 0 - current frame */
-        uint    sen_tbuf0data1; /* Save area 1 - current frame */
-        uint    sen_tbuf0rba;   /* Internal */
-        uint    sen_tbuf0crc;   /* Internal */
-        ushort  sen_tbuf0bcnt;  /* Internal */
-        ushort  sen_paddrh;     /* physical address (MSB) */
-        ushort  sen_paddrm;
-        ushort  sen_paddrl;     /* physical address (LSB) */
-        ushort  sen_pper;       /* persistence */
-        ushort  sen_rfbdptr;    /* Rx first BD pointer */
-        ushort  sen_tfbdptr;    /* Tx first BD pointer */
-        ushort  sen_tlbdptr;    /* Tx last BD pointer */
-        uint    sen_tbuf1data0; /* Save area 0 - current frame */
-        uint    sen_tbuf1data1; /* Save area 1 - current frame */
-        uint    sen_tbuf1rba;   /* Internal */
-        uint    sen_tbuf1crc;   /* Internal */
-        ushort  sen_tbuf1bcnt;  /* Internal */
-        ushort  sen_txlen;      /* Tx Frame length counter */
-        ushort  sen_iaddr1;     /* Individual address filter */
-        ushort  sen_iaddr2;
-        ushort  sen_iaddr3;
-        ushort  sen_iaddr4;
-        ushort  sen_boffcnt;    /* Backoff counter */
-
-        /* NOTE: Some versions of the manual have the following items
-         * incorrectly documented.  Below is the proper order.
-         */
-        ushort  sen_taddrh;     /* temp address (MSB) */
-        ushort  sen_taddrm;
-        ushort  sen_taddrl;     /* temp address (LSB) */
-} scc_enet_t;
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA   ((ushort)0x0080)        /* Graceful stop complete */
-#define SCCE_ENET_TXE   ((ushort)0x0010)        /* Transmit Error */
-#define SCCE_ENET_RXF   ((ushort)0x0008)        /* Full frame received */
-#define SCCE_ENET_BSY   ((ushort)0x0004)        /* All incoming buffers full */
-#define SCCE_ENET_TXB   ((ushort)0x0002)        /* A buffer was transmitted */
-#define SCCE_ENET_RXB   ((ushort)0x0001)        /* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC    ((ushort)0x8000)        /* Enable heartbeat */
-#define SCC_PSMR_FC     ((ushort)0x4000)        /* Force collision */
-#define SCC_PSMR_RSH    ((ushort)0x2000)        /* Receive short frames */
-#define SCC_PSMR_IAM    ((ushort)0x1000)        /* Check individual hash */
-#define SCC_PSMR_ENCRC  ((ushort)0x0800)        /* Ethernet CRC mode */
-#define SCC_PSMR_PRO    ((ushort)0x0200)        /* Promiscuous mode */
-#define SCC_PSMR_BRO    ((ushort)0x0100)        /* Catch broadcast pkts */
-#define SCC_PSMR_SBT    ((ushort)0x0080)        /* Special backoff timer */
-#define SCC_PSMR_LPB    ((ushort)0x0040)        /* Set Loopback mode */
-#define SCC_PSMR_SIP    ((ushort)0x0020)        /* Sample Input Pins */
-#define SCC_PSMR_LCW    ((ushort)0x0010)        /* Late collision window */
-#define SCC_PSMR_NIB22  ((ushort)0x000a)        /* Start frame search */
-#define SCC_PSMR_FDE    ((ushort)0x0001)        /* Full duplex enable */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
-        sccp_t  scc_genscc;
-        char    res1[8];        /* Reserved */
-        ushort  scc_maxidl;     /* Maximum idle chars */
-        ushort  scc_idlc;       /* temp idle counter */
-        ushort  scc_brkcr;      /* Break count register */
-        ushort  scc_parec;      /* receive parity error counter */
-        ushort  scc_frmec;      /* receive framing error counter */
-        ushort  scc_nosec;      /* receive noise counter */
-        ushort  scc_brkec;      /* receive break condition counter */
-        ushort  scc_brkln;      /* last received break length */
-        ushort  scc_uaddr1;     /* UART address character 1 */
-        ushort  scc_uaddr2;     /* UART address character 2 */
-        ushort  scc_rtemp;      /* Temp storage */
-        ushort  scc_toseq;      /* Transmit out of sequence char */
-        ushort  scc_char1;      /* control character 1 */
-        ushort  scc_char2;      /* control character 2 */
-        ushort  scc_char3;      /* control character 3 */
-        ushort  scc_char4;      /* control character 4 */
-        ushort  scc_char5;      /* control character 5 */
-        ushort  scc_char6;      /* control character 6 */
-        ushort  scc_char7;      /* control character 7 */
-        ushort  scc_char8;      /* control character 8 */
-        ushort  scc_rccm;       /* receive control character mask */
-        ushort  scc_rccr;       /* receive control character register */
-        ushort  scc_rlbc;       /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR           ((ushort)0x1000)
-#define UART_SCCM_GLT           ((ushort)0x0800)
-#define UART_SCCM_AB            ((ushort)0x0200)
-#define UART_SCCM_IDL           ((ushort)0x0100)
-#define UART_SCCM_GRA           ((ushort)0x0080)
-#define UART_SCCM_BRKE          ((ushort)0x0040)
-#define UART_SCCM_BRKS          ((ushort)0x0020)
-#define UART_SCCM_CCR           ((ushort)0x0008)
-#define UART_SCCM_BSY           ((ushort)0x0004)
-#define UART_SCCM_TX            ((ushort)0x0002)
-#define UART_SCCM_RX            ((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PSMR_FLC            ((ushort)0x8000)
-#define SCU_PSMR_SL             ((ushort)0x4000)
-#define SCU_PSMR_CL             ((ushort)0x3000)
-#define SCU_PSMR_UM             ((ushort)0x0c00)
-#define SCU_PSMR_FRZ            ((ushort)0x0200)
-#define SCU_PSMR_RZS            ((ushort)0x0100)
-#define SCU_PSMR_SYN            ((ushort)0x0080)
-#define SCU_PSMR_DRT            ((ushort)0x0040)
-#define SCU_PSMR_PEN            ((ushort)0x0010)
-#define SCU_PSMR_RPM            ((ushort)0x000c)
-#define SCU_PSMR_REVP           ((ushort)0x0008)
-#define SCU_PSMR_TPM            ((ushort)0x0003)
-#define SCU_PSMR_TEVP           ((ushort)0x0002)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
-        sccp_t  st_genscc;
-        uint    st_cpres;       /* Preset CRC */
-        uint    st_cmask;       /* Constant mask for CRC */
-} scc_trans_t;
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
-        ushort  iic_rbase;      /* Rx Buffer descriptor base address */
-        ushort  iic_tbase;      /* Tx Buffer descriptor base address */
-        u_char  iic_rfcr;       /* Rx function code */
-        u_char  iic_tfcr;       /* Tx function code */
-        ushort  iic_mrblr;      /* Max receive buffer length */
-        uint    iic_rstate;     /* Internal */
-        uint    iic_rdp;        /* Internal */
-        ushort  iic_rbptr;      /* Internal */
-        ushort  iic_rbc;        /* Internal */
-        uint    iic_rxtmp;      /* Internal */
-        uint    iic_tstate;     /* Internal */
-        uint    iic_tdp;        /* Internal */
-        ushort  iic_tbptr;      /* Internal */
-        ushort  iic_tbc;        /* Internal */
-        uint    iic_txtmp;      /* Internal */
-        char    res1[4];        /* Reserved */
-        ushort  iic_rpbase;     /* Relocation pointer */
-        char    res2[2];        /* Reserved */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
-        ushort  spi_rbase;      /* Rx Buffer descriptor base address */
-        ushort  spi_tbase;      /* Tx Buffer descriptor base address */
-        u_char  spi_rfcr;       /* Rx function code */
-        u_char  spi_tfcr;       /* Tx function code */
-        ushort  spi_mrblr;      /* Max receive buffer length */
-        uint    spi_rstate;     /* Internal */
-        uint    spi_rdp;        /* Internal */
-        ushort  spi_rbptr;      /* Internal */
-        ushort  spi_rbc;        /* Internal */
-        uint    spi_rxtmp;      /* Internal */
-        uint    spi_tstate;     /* Internal */
-        uint    spi_tdp;        /* Internal */
-        ushort  spi_tbptr;      /* Internal */
-        ushort  spi_tbc;        /* Internal */
-        uint    spi_txtmp;      /* Internal */
-        uint    spi_res;
-        ushort  spi_rpbase;     /* Relocation pointer */
-        ushort  spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP     ((ushort)0x4000)        /* Loopback */
-#define SPMODE_CI       ((ushort)0x2000)        /* Clock Invert */
-#define SPMODE_CP       ((ushort)0x1000)        /* Clock Phase */
-#define SPMODE_DIV16    ((ushort)0x0800)        /* BRG/16 mode */
-#define SPMODE_REV      ((ushort)0x0400)        /* Reversed Data */
-#define SPMODE_MSTR     ((ushort)0x0200)        /* SPI Master */
-#define SPMODE_EN       ((ushort)0x0100)        /* Enable */
-#define SPMODE_LENMSK   ((ushort)0x00f0)        /* character length */
-#define SPMODE_LEN4     ((ushort)0x0030)        /*  4 bits per char */
-#define SPMODE_LEN8     ((ushort)0x0070)        /*  8 bits per char */
-#define SPMODE_LEN16    ((ushort)0x00f0)        /* 16 bits per char */
-#define SPMODE_PMMSK    ((ushort)0x000f)        /* prescale modulus */
-
-/* SPIE fields */
-#define SPIE_MME        0x20
-#define SPIE_TXE        0x10
-#define SPIE_BSY        0x04
-#define SPIE_TXB        0x02
-#define SPIE_RXB        0x01
-
-/*
- * RISC Controller Configuration Register definitons
- */
-#define RCCR_TIME       0x8000                  /* RISC Timer Enable */
-#define RCCR_TIMEP(t)   (((t) & 0x3F)<<8)       /* RISC Timer Period */
-#define RCCR_TIME_MASK  0x00FF                  /* not RISC Timer related bits */
-
-/* RISC Timer Parameter RAM offset */
-#define PROFF_RTMR      ((uint)0x01B0)
-
-typedef struct risc_timer_pram {
-        unsigned short  tm_base;        /* RISC Timer Table Base Address */
-        unsigned short  tm_ptr;         /* RISC Timer Table Pointer (internal) */
-        unsigned short  r_tmr;          /* RISC Timer Mode Register */
-        unsigned short  r_tmv;          /* RISC Timer Valid Register */
-        unsigned long   tm_cmd;         /* RISC Timer Command Register */
-        unsigned long   tm_cnt;         /* RISC Timer Internal Count */
-} rt_pram_t;
-
-/* Bits in RISC Timer Command Register */
-#define TM_CMD_VALID    0x80000000      /* Valid - Enables the timer */
-#define TM_CMD_RESTART  0x40000000      /* Restart - for automatic restart */
-#define TM_CMD_PWM      0x20000000      /* Run in Pulse Width Modulation Mode */
-#define TM_CMD_NUM(n)   (((n)&0xF)<<16) /* Timer Number */
-#define TM_CMD_PERIOD(p) ((p)&0xFFFF)   /* Timer Period */
-
-/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
- * channels or devices.  All of these are presented to the PPC core
- * as a single interrupt.  The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler.  We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-#define CPMVEC_NR               32
-#define CPMVEC_PIO_PC15         ((ushort)0x1f)
-#define CPMVEC_SCC1             ((ushort)0x1e)
-#define CPMVEC_SCC2             ((ushort)0x1d)
-#define CPMVEC_SCC3             ((ushort)0x1c)
-#define CPMVEC_SCC4             ((ushort)0x1b)
-#define CPMVEC_PIO_PC14         ((ushort)0x1a)
-#define CPMVEC_TIMER1           ((ushort)0x19)
-#define CPMVEC_PIO_PC13         ((ushort)0x18)
-#define CPMVEC_PIO_PC12         ((ushort)0x17)
-#define CPMVEC_SDMA_CB_ERR      ((ushort)0x16)
-#define CPMVEC_IDMA1            ((ushort)0x15)
-#define CPMVEC_IDMA2            ((ushort)0x14)
-#define CPMVEC_TIMER2           ((ushort)0x12)
-#define CPMVEC_RISCTIMER        ((ushort)0x11)
-#define CPMVEC_I2C              ((ushort)0x10)
-#define CPMVEC_PIO_PC11         ((ushort)0x0f)
-#define CPMVEC_PIO_PC10         ((ushort)0x0e)
-#define CPMVEC_TIMER3           ((ushort)0x0c)
-#define CPMVEC_PIO_PC9          ((ushort)0x0b)
-#define CPMVEC_PIO_PC8          ((ushort)0x0a)
-#define CPMVEC_PIO_PC7          ((ushort)0x09)
-#define CPMVEC_TIMER4           ((ushort)0x07)
-#define CPMVEC_PIO_PC6          ((ushort)0x06)
-#define CPMVEC_SPI              ((ushort)0x05)
-#define CPMVEC_SMC1             ((ushort)0x04)
-#define CPMVEC_SMC2             ((ushort)0x03)
-#define CPMVEC_PIO_PC5          ((ushort)0x02)
-#define CPMVEC_PIO_PC4          ((ushort)0x01)
-#define CPMVEC_ERROR            ((ushort)0x00)
-
-/* CPM interrupt configuration vector.
-*/
-#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
-#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
-#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
-#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
-#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
-#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
-#define CICR_IEN                ((uint)0x00000080)      /* Int. enable */
-#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
-
-#define IMAP_ADDR               (get_immrbase())
-
-#define CPM_PIN_INPUT     0
-#define CPM_PIN_OUTPUT    1
-#define CPM_PIN_PRIMARY   0
-#define CPM_PIN_SECONDARY 2
-#define CPM_PIN_GPIO      4
-#define CPM_PIN_OPENDRAIN 8
-
-enum cpm_port {
-        CPM_PORTA,
-        CPM_PORTB,
-        CPM_PORTC,
-        CPM_PORTD,
-        CPM_PORTE,
-};
-
-void cpm1_set_pin(enum cpm_port port, int pin, int flags);
-
-enum cpm_clk_dir {
-        CPM_CLK_RX,
-        CPM_CLK_TX,
-        CPM_CLK_RTX
-};
-
-enum cpm_clk_target {
-        CPM_CLK_SCC1,
-        CPM_CLK_SCC2,
-        CPM_CLK_SCC3,
-        CPM_CLK_SCC4,
-        CPM_CLK_SMC1,
-        CPM_CLK_SMC2,
-};
-
-enum cpm_clk {
-        CPM_BRG1,       /* Baud Rate Generator  1 */
-        CPM_BRG2,       /* Baud Rate Generator  2 */
-        CPM_BRG3,       /* Baud Rate Generator  3 */
-        CPM_BRG4,       /* Baud Rate Generator  4 */
-        CPM_CLK1,       /* Clock  1 */
-        CPM_CLK2,       /* Clock  2 */
-        CPM_CLK3,       /* Clock  3 */
-        CPM_CLK4,       /* Clock  4 */
-        CPM_CLK5,       /* Clock  5 */
-        CPM_CLK6,       /* Clock  6 */
-        CPM_CLK7,       /* Clock  7 */
-        CPM_CLK8,       /* Clock  8 */
-};
-
-int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
-
-#endif /* __CPM1__ */
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
deleted file mode 100644
index 2a6fa0183ac9..000000000000
--- a/include/asm-powerpc/cpm2.h
+++ /dev/null
@@ -1,1195 +0,0 @@
-/*
- * Communication Processor Module v2.
- *
- * This file contains structures and information for the communication
- * processor channels found in the dual port RAM or parameter RAM.
- * All CPM control and status is available through the CPM2 internal
- * memory map.  See immap_cpm2.h for details.
- */
-#ifdef __KERNEL__
-#ifndef __CPM2__
-#define __CPM2__
-
-#include <asm/immap_cpm2.h>
-#include <asm/cpm.h>
-#include <sysdev/fsl_soc.h>
-
-#ifdef CONFIG_PPC_85xx
-#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
-#endif
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST      ((uint)0x80000000)
-#define CPM_CR_PAGE     ((uint)0x7c000000)
-#define CPM_CR_SBLOCK   ((uint)0x03e00000)
-#define CPM_CR_FLG      ((uint)0x00010000)
-#define CPM_CR_MCN      ((uint)0x00003fc0)
-#define CPM_CR_OPCODE   ((uint)0x0000000f)
-
-/* Device sub-block and page codes.
-*/
-#define CPM_CR_SCC1_SBLOCK      (0x04)
-#define CPM_CR_SCC2_SBLOCK      (0x05)
-#define CPM_CR_SCC3_SBLOCK      (0x06)
-#define CPM_CR_SCC4_SBLOCK      (0x07)
-#define CPM_CR_SMC1_SBLOCK      (0x08)
-#define CPM_CR_SMC2_SBLOCK      (0x09)
-#define CPM_CR_SPI_SBLOCK       (0x0a)
-#define CPM_CR_I2C_SBLOCK       (0x0b)
-#define CPM_CR_TIMER_SBLOCK     (0x0f)
-#define CPM_CR_RAND_SBLOCK      (0x0e)
-#define CPM_CR_FCC1_SBLOCK      (0x10)
-#define CPM_CR_FCC2_SBLOCK      (0x11)
-#define CPM_CR_FCC3_SBLOCK      (0x12)
-#define CPM_CR_IDMA1_SBLOCK     (0x14)
-#define CPM_CR_IDMA2_SBLOCK     (0x15)
-#define CPM_CR_IDMA3_SBLOCK     (0x16)
-#define CPM_CR_IDMA4_SBLOCK     (0x17)
-#define CPM_CR_MCC1_SBLOCK      (0x1c)
-
-#define CPM_CR_FCC_SBLOCK(x)    (x + 0x10)
-
-#define CPM_CR_SCC1_PAGE        (0x00)
-#define CPM_CR_SCC2_PAGE        (0x01)
-#define CPM_CR_SCC3_PAGE        (0x02)
-#define CPM_CR_SCC4_PAGE        (0x03)
-#define CPM_CR_SMC1_PAGE        (0x07)
-#define CPM_CR_SMC2_PAGE        (0x08)
-#define CPM_CR_SPI_PAGE         (0x09)
-#define CPM_CR_I2C_PAGE         (0x0a)
-#define CPM_CR_TIMER_PAGE       (0x0a)
-#define CPM_CR_RAND_PAGE        (0x0a)
-#define CPM_CR_FCC1_PAGE        (0x04)
-#define CPM_CR_FCC2_PAGE        (0x05)
-#define CPM_CR_FCC3_PAGE        (0x06)
-#define CPM_CR_IDMA1_PAGE       (0x07)
-#define CPM_CR_IDMA2_PAGE       (0x08)
-#define CPM_CR_IDMA3_PAGE       (0x09)
-#define CPM_CR_IDMA4_PAGE       (0x0a)
-#define CPM_CR_MCC1_PAGE        (0x07)
-#define CPM_CR_MCC2_PAGE        (0x08)
-
-#define CPM_CR_FCC_PAGE(x)      (x + 0x04)
-
-/* CPM2-specific opcodes (see cpm.h for common opcodes)
-*/
-#define CPM_CR_START_IDMA       ((ushort)0x0009)
-
-#define mk_cr_cmd(PG, SBC, MCN, OP) \
-        ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
-
-/* The number of pages of host memory we allocate for CPM.  This is
- * done early in kernel initialization to get physically contiguous
- * pages.
- */
-#define NUM_CPM_HOST_PAGES      2
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
-
-#define cpm_dpalloc cpm_muram_alloc
-#define cpm_dpfree cpm_muram_free
-#define cpm_dpram_addr cpm_muram_addr
-
-extern void cpm2_reset(void);
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST             ((uint)0x00020000)
-#define CPM_BRG_EN              ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9     ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15    ((uint)0x00008000)
-#define CPM_BRG_ATB             ((uint)0x00002000)
-#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
-#define CPM_BRG_DIV16           ((uint)0x00000001)
-
-#define CPM2_BRG_INT_CLK        (get_brgfreq())
-#define CPM2_BRG_UART_CLK       (CPM2_BRG_INT_CLK/16)
-
-extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-static inline void cpm_setbrg(uint brg, uint rate)
-{
-        __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-        __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
-}
-
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL      ((u_char)0x20)  /* Set memory snooping */
-#define CPMFCR_EB       ((u_char)0x10)  /* Set big endian byte order */
-#define CPMFCR_TC2      ((u_char)0x04)  /* Transfer code 2 value */
-#define CPMFCR_DTB      ((u_char)0x02)  /* Use local bus for data when set */
-#define CPMFCR_BDB      ((u_char)0x01)  /* Use local bus for BD when set */
-
-/* Parameter RAM offsets from the base.
-*/
-#define PROFF_SCC1              ((uint)0x8000)
-#define PROFF_SCC2              ((uint)0x8100)
-#define PROFF_SCC3              ((uint)0x8200)
-#define PROFF_SCC4              ((uint)0x8300)
-#define PROFF_FCC1              ((uint)0x8400)
-#define PROFF_FCC2              ((uint)0x8500)
-#define PROFF_FCC3              ((uint)0x8600)
-#define PROFF_MCC1              ((uint)0x8700)
-#define PROFF_SMC1_BASE         ((uint)0x87fc)
-#define PROFF_IDMA1_BASE        ((uint)0x87fe)
-#define PROFF_MCC2              ((uint)0x8800)
-#define PROFF_SMC2_BASE         ((uint)0x88fc)
-#define PROFF_IDMA2_BASE        ((uint)0x88fe)
-#define PROFF_SPI_BASE          ((uint)0x89fc)
-#define PROFF_IDMA3_BASE        ((uint)0x89fe)
-#define PROFF_TIMERS            ((uint)0x8ae0)
-#define PROFF_REVNUM            ((uint)0x8af0)
-#define PROFF_RAND              ((uint)0x8af8)
-#define PROFF_I2C_BASE          ((uint)0x8afc)
-#define PROFF_IDMA4_BASE        ((uint)0x8afe)
-
-#define PROFF_SCC_SIZE          ((uint)0x100)
-#define PROFF_FCC_SIZE          ((uint)0x100)
-#define PROFF_SMC_SIZE          ((uint)64)
-
-/* The SMCs are relocated to any of the first eight DPRAM pages.
- * We will fix these at the first locations of DPRAM, until we
- * get some microcode patches :-).
- * The parameter ram space for the SMCs is fifty-some bytes, and
- * they are required to start on a 64 byte boundary.
- */
-#define PROFF_SMC1      (0)
-#define PROFF_SMC2      (64)
-
-
-/* Define enough so I can at least use the serial port as a UART.
- */
-typedef struct smc_uart {
-        ushort  smc_rbase;      /* Rx Buffer descriptor base address */
-        ushort  smc_tbase;      /* Tx Buffer descriptor base address */
-        u_char  smc_rfcr;       /* Rx function code */
-        u_char  smc_tfcr;       /* Tx function code */
-        ushort  smc_mrblr;      /* Max receive buffer length */
-        uint    smc_rstate;     /* Internal */
-        uint    smc_idp;        /* Internal */
-        ushort  smc_rbptr;      /* Internal */
-        ushort  smc_ibc;        /* Internal */
-        uint    smc_rxtmp;      /* Internal */
-        uint    smc_tstate;     /* Internal */
-        uint    smc_tdp;        /* Internal */
-        ushort  smc_tbptr;      /* Internal */
-        ushort  smc_tbc;        /* Internal */
-        uint    smc_txtmp;      /* Internal */
-        ushort  smc_maxidl;     /* Maximum idle characters */
-        ushort  smc_tmpidl;     /* Temporary idle counter */
-        ushort  smc_brklen;     /* Last received break length */
-        ushort  smc_brkec;      /* rcv'd break condition counter */
-        ushort  smc_brkcr;      /* xmt break count register */
-        ushort  smc_rmask;      /* Temporary bit mask */
-        uint    smc_stmp;       /* SDMA Temp */
-} smc_uart_t;
-
-/* SMC uart mode register (Internal memory map).
-*/
-#define SMCMR_REN       ((ushort)0x0001)
-#define SMCMR_TEN       ((ushort)0x0002)
-#define SMCMR_DM        ((ushort)0x000c)
-#define SMCMR_SM_GCI    ((ushort)0x0000)
-#define SMCMR_SM_UART   ((ushort)0x0020)
-#define SMCMR_SM_TRANS  ((ushort)0x0030)
-#define SMCMR_SM_MASK   ((ushort)0x0030)
-#define SMCMR_PM_EVEN   ((ushort)0x0100)        /* Even parity, else odd */
-#define SMCMR_REVD      SMCMR_PM_EVEN
-#define SMCMR_PEN       ((ushort)0x0200)        /* Parity enable */
-#define SMCMR_BS        SMCMR_PEN
-#define SMCMR_SL        ((ushort)0x0400)        /* Two stops, else one */
-#define SMCR_CLEN_MASK  ((ushort)0x7800)        /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
-#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
-#define SMCM_TXE        ((unsigned char)0x10)
-#define SMCM_BSY        ((unsigned char)0x04)
-#define SMCM_TX         ((unsigned char)0x02)
-#define SMCM_RX         ((unsigned char)0x01)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP           ((uint)0x00040000)
-#define SCC_GSMRH_GDE           ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT    ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC   ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC     ((uint)0x00000000)
-#define SCC_GSMRH_REVD          ((uint)0x00002000)
-#define SCC_GSMRH_TRX           ((uint)0x00001000)
-#define SCC_GSMRH_TTX           ((uint)0x00000800)
-#define SCC_GSMRH_CDP           ((uint)0x00000400)
-#define SCC_GSMRH_CTSP          ((uint)0x00000200)
-#define SCC_GSMRH_CDS           ((uint)0x00000100)
-#define SCC_GSMRH_CTSS          ((uint)0x00000080)
-#define SCC_GSMRH_TFL           ((uint)0x00000040)
-#define SCC_GSMRH_RFW           ((uint)0x00000020)
-#define SCC_GSMRH_TXSY          ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16        ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8         ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4         ((uint)0x00000004)
-#define SCC_GSMRH_RTSM          ((uint)0x00000002)
-#define SCC_GSMRH_RSYN          ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR           ((uint)0x80000000)      /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE     ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG      ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS      ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH     ((uint)0x00000000)
-#define SCC_GSMRL_TCI           ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3        ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4        ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14       ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF      ((uint)0x00000000)
-#define SCC_GSMRL_RINV          ((uint)0x02000000)
-#define SCC_GSMRL_TINV          ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128       ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64        ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48        ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32        ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16        ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8         ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE      ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1      ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01        ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10        ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS     ((uint)0x00000000)
-#define SCC_GSMRL_TEND          ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32       ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16       ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8        ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1        ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32       ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16       ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8        ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1        ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN    ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH    ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0      ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI     ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ      ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN    ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH    ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0      ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI     ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ      ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE       ((uint)0x000000c0)      /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO     ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP     ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM     ((uint)0x00000000)
-#define SCC_GSMRL_ENR           ((uint)0x00000020)
-#define SCC_GSMRL_ENT           ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET     ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP    ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC   ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14      ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC    ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART     ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7      ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK    ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC     ((uint)0x00000000)
-
-#define SCC_TODR_TOD            ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE        ((unsigned char)0x10)
-#define SCCM_BSY        ((unsigned char)0x04)
-#define SCCM_TX         ((unsigned char)0x02)
-#define SCCM_RX         ((unsigned char)0x01)
-
-typedef struct scc_param {
-        ushort  scc_rbase;      /* Rx Buffer descriptor base address */
-        ushort  scc_tbase;      /* Tx Buffer descriptor base address */
-        u_char  scc_rfcr;       /* Rx function code */
-        u_char  scc_tfcr;       /* Tx function code */
-        ushort  scc_mrblr;      /* Max receive buffer length */
-        uint    scc_rstate;     /* Internal */
-        uint    scc_idp;        /* Internal */
-        ushort  scc_rbptr;      /* Internal */
-        ushort  scc_ibc;        /* Internal */
-        uint    scc_rxtmp;      /* Internal */
-        uint    scc_tstate;     /* Internal */
-        uint    scc_tdp;        /* Internal */
-        ushort  scc_tbptr;      /* Internal */
-        ushort  scc_tbc;        /* Internal */
-        uint    scc_txtmp;      /* Internal */
-        uint    scc_rcrc;       /* Internal */
-        uint    scc_tcrc;       /* Internal */
-} sccp_t;
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
-        sccp_t  sen_genscc;
-        uint    sen_cpres;      /* Preset CRC */
-        uint    sen_cmask;      /* Constant mask for CRC */
-        uint    sen_crcec;      /* CRC Error counter */
-        uint    sen_alec;       /* alignment error counter */
-        uint    sen_disfc;      /* discard frame counter */
-        ushort  sen_pads;       /* Tx short frame pad character */
-        ushort  sen_retlim;     /* Retry limit threshold */
-        ushort  sen_retcnt;     /* Retry limit counter */
-        ushort  sen_maxflr;     /* maximum frame length register */
-        ushort  sen_minflr;     /* minimum frame length register */
-        ushort  sen_maxd1;      /* maximum DMA1 length */
-        ushort  sen_maxd2;      /* maximum DMA2 length */
-        ushort  sen_maxd;       /* Rx max DMA */
-        ushort  sen_dmacnt;     /* Rx DMA counter */
-        ushort  sen_maxb;       /* Max BD byte count */
-        ushort  sen_gaddr1;     /* Group address filter */
-        ushort  sen_gaddr2;
-        ushort  sen_gaddr3;
-        ushort  sen_gaddr4;
-        uint    sen_tbuf0data0; /* Save area 0 - current frame */
-        uint    sen_tbuf0data1; /* Save area 1 - current frame */
-        uint    sen_tbuf0rba;   /* Internal */
-        uint    sen_tbuf0crc;   /* Internal */
-        ushort  sen_tbuf0bcnt;  /* Internal */
-        ushort  sen_paddrh;     /* physical address (MSB) */
-        ushort  sen_paddrm;
-        ushort  sen_paddrl;     /* physical address (LSB) */
-        ushort  sen_pper;       /* persistence */
-        ushort  sen_rfbdptr;    /* Rx first BD pointer */
-        ushort  sen_tfbdptr;    /* Tx first BD pointer */
-        ushort  sen_tlbdptr;    /* Tx last BD pointer */
-        uint    sen_tbuf1data0; /* Save area 0 - current frame */
-        uint    sen_tbuf1data1; /* Save area 1 - current frame */
-        uint    sen_tbuf1rba;   /* Internal */
-        uint    sen_tbuf1crc;   /* Internal */
-        ushort  sen_tbuf1bcnt;  /* Internal */
-        ushort  sen_txlen;      /* Tx Frame length counter */
-        ushort  sen_iaddr1;     /* Individual address filter */
-        ushort  sen_iaddr2;
-        ushort  sen_iaddr3;
-        ushort  sen_iaddr4;
-        ushort  sen_boffcnt;    /* Backoff counter */
-
-        /* NOTE: Some versions of the manual have the following items
-         * incorrectly documented.  Below is the proper order.
-         */
-        ushort  sen_taddrh;     /* temp address (MSB) */
-        ushort  sen_taddrm;
-        ushort  sen_taddrl;     /* temp address (LSB) */
-} scc_enet_t;
-
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA   ((ushort)0x0080)        /* Graceful stop complete */
-#define SCCE_ENET_TXE   ((ushort)0x0010)        /* Transmit Error */
-#define SCCE_ENET_RXF   ((ushort)0x0008)        /* Full frame received */
-#define SCCE_ENET_BSY   ((ushort)0x0004)        /* All incoming buffers full */
-#define SCCE_ENET_TXB   ((ushort)0x0002)        /* A buffer was transmitted */
-#define SCCE_ENET_RXB   ((ushort)0x0001)        /* A buffer was received */
-
-/* SCC Mode Register (PSMR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC    ((ushort)0x8000)        /* Enable heartbeat */
-#define SCC_PSMR_FC     ((ushort)0x4000)        /* Force collision */
-#define SCC_PSMR_RSH    ((ushort)0x2000)        /* Receive short frames */
-#define SCC_PSMR_IAM    ((ushort)0x1000)        /* Check individual hash */
-#define SCC_PSMR_ENCRC  ((ushort)0x0800)        /* Ethernet CRC mode */
-#define SCC_PSMR_PRO    ((ushort)0x0200)        /* Promiscuous mode */
-#define SCC_PSMR_BRO    ((ushort)0x0100)        /* Catch broadcast pkts */
-#define SCC_PSMR_SBT    ((ushort)0x0080)        /* Special backoff timer */
-#define SCC_PSMR_LPB    ((ushort)0x0040)        /* Set Loopback mode */
-#define SCC_PSMR_SIP    ((ushort)0x0020)        /* Sample Input Pins */
-#define SCC_PSMR_LCW    ((ushort)0x0010)        /* Late collision window */
-#define SCC_PSMR_NIB22  ((ushort)0x000a)        /* Start frame search */
-#define SCC_PSMR_FDE    ((ushort)0x0001)        /* Full duplex enable */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
-        sccp_t  scc_genscc;
-        uint    scc_res1;       /* Reserved */
-        uint    scc_res2;       /* Reserved */
-        ushort  scc_maxidl;     /* Maximum idle chars */
-        ushort  scc_idlc;       /* temp idle counter */
-        ushort  scc_brkcr;      /* Break count register */
-        ushort  scc_parec;      /* receive parity error counter */
-        ushort  scc_frmec;      /* receive framing error counter */
-        ushort  scc_nosec;      /* receive noise counter */
-        ushort  scc_brkec;      /* receive break condition counter */
-        ushort  scc_brkln;      /* last received break length */
-        ushort  scc_uaddr1;     /* UART address character 1 */
-        ushort  scc_uaddr2;     /* UART address character 2 */
-        ushort  scc_rtemp;      /* Temp storage */
-        ushort  scc_toseq;      /* Transmit out of sequence char */
-        ushort  scc_char1;      /* control character 1 */
-        ushort  scc_char2;      /* control character 2 */
-        ushort  scc_char3;      /* control character 3 */
-        ushort  scc_char4;      /* control character 4 */
-        ushort  scc_char5;      /* control character 5 */
-        ushort  scc_char6;      /* control character 6 */
-        ushort  scc_char7;      /* control character 7 */
-        ushort  scc_char8;      /* control character 8 */
-        ushort  scc_rccm;       /* receive control character mask */
-        ushort  scc_rccr;       /* receive control character register */
-        ushort  scc_rlbc;       /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR           ((ushort)0x1000)
-#define UART_SCCM_GLT           ((ushort)0x0800)
-#define UART_SCCM_AB            ((ushort)0x0200)
-#define UART_SCCM_IDL           ((ushort)0x0100)
-#define UART_SCCM_GRA           ((ushort)0x0080)
-#define UART_SCCM_BRKE          ((ushort)0x0040)
-#define UART_SCCM_BRKS          ((ushort)0x0020)
-#define UART_SCCM_CCR           ((ushort)0x0008)
-#define UART_SCCM_BSY           ((ushort)0x0004)
-#define UART_SCCM_TX            ((ushort)0x0002)
-#define UART_SCCM_RX            ((ushort)0x0001)
-
-/* The SCC PSMR when used as a UART.
-*/
-#define SCU_PSMR_FLC            ((ushort)0x8000)
-#define SCU_PSMR_SL             ((ushort)0x4000)
-#define SCU_PSMR_CL             ((ushort)0x3000)
-#define SCU_PSMR_UM             ((ushort)0x0c00)
-#define SCU_PSMR_FRZ            ((ushort)0x0200)
-#define SCU_PSMR_RZS            ((ushort)0x0100)
-#define SCU_PSMR_SYN            ((ushort)0x0080)
-#define SCU_PSMR_DRT            ((ushort)0x0040)
-#define SCU_PSMR_PEN            ((ushort)0x0010)
-#define SCU_PSMR_RPM            ((ushort)0x000c)
-#define SCU_PSMR_REVP           ((ushort)0x0008)
-#define SCU_PSMR_TPM            ((ushort)0x0003)
-#define SCU_PSMR_TEVP           ((ushort)0x0002)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
-        sccp_t  st_genscc;
-        uint    st_cpres;       /* Preset CRC */
-        uint    st_cmask;       /* Constant mask for CRC */
-} scc_trans_t;
-
-/* How about some FCCs.....
-*/
-#define FCC_GFMR_DIAG_NORM      ((uint)0x00000000)
-#define FCC_GFMR_DIAG_LE        ((uint)0x40000000)
-#define FCC_GFMR_DIAG_AE        ((uint)0x80000000)
-#define FCC_GFMR_DIAG_ALE       ((uint)0xc0000000)
-#define FCC_GFMR_TCI            ((uint)0x20000000)
-#define FCC_GFMR_TRX            ((uint)0x10000000)
-#define FCC_GFMR_TTX            ((uint)0x08000000)
-#define FCC_GFMR_TTX            ((uint)0x08000000)
-#define FCC_GFMR_CDP            ((uint)0x04000000)
-#define FCC_GFMR_CTSP           ((uint)0x02000000)
-#define FCC_GFMR_CDS            ((uint)0x01000000)
-#define FCC_GFMR_CTSS           ((uint)0x00800000)
-#define FCC_GFMR_SYNL_NONE      ((uint)0x00000000)
-#define FCC_GFMR_SYNL_AUTO      ((uint)0x00004000)
-#define FCC_GFMR_SYNL_8         ((uint)0x00008000)
-#define FCC_GFMR_SYNL_16        ((uint)0x0000c000)
-#define FCC_GFMR_RTSM           ((uint)0x00002000)
-#define FCC_GFMR_RENC_NRZ       ((uint)0x00000000)
-#define FCC_GFMR_RENC_NRZI      ((uint)0x00000800)
-#define FCC_GFMR_REVD           ((uint)0x00000400)
-#define FCC_GFMR_TENC_NRZ       ((uint)0x00000000)
-#define FCC_GFMR_TENC_NRZI      ((uint)0x00000100)
-#define FCC_GFMR_TCRC_16        ((uint)0x00000000)
-#define FCC_GFMR_TCRC_32        ((uint)0x00000080)
-#define FCC_GFMR_ENR            ((uint)0x00000020)
-#define FCC_GFMR_ENT            ((uint)0x00000010)
-#define FCC_GFMR_MODE_ENET      ((uint)0x0000000c)
-#define FCC_GFMR_MODE_ATM       ((uint)0x0000000a)
-#define FCC_GFMR_MODE_HDLC      ((uint)0x00000000)
-
-/* Generic FCC parameter ram.
-*/
-typedef struct fcc_param {
-        ushort  fcc_riptr;      /* Rx Internal temp pointer */
-        ushort  fcc_tiptr;      /* Tx Internal temp pointer */
-        ushort  fcc_res1;
-        ushort  fcc_mrblr;      /* Max receive buffer length, mod 32 bytes */
-        uint    fcc_rstate;     /* Upper byte is Func code, must be set */
-        uint    fcc_rbase;      /* Receive BD base */
-        ushort  fcc_rbdstat;    /* RxBD status */
-        ushort  fcc_rbdlen;     /* RxBD down counter */
-        uint    fcc_rdptr;      /* RxBD internal data pointer */
-        uint    fcc_tstate;     /* Upper byte is Func code, must be set */
-        uint    fcc_tbase;      /* Transmit BD base */
-        ushort  fcc_tbdstat;    /* TxBD status */
-        ushort  fcc_tbdlen;     /* TxBD down counter */
-        uint    fcc_tdptr;      /* TxBD internal data pointer */
-        uint    fcc_rbptr;      /* Rx BD Internal buf pointer */
-        uint    fcc_tbptr;      /* Tx BD Internal buf pointer */
-        uint    fcc_rcrc;       /* Rx temp CRC */
-        uint    fcc_res2;
-        uint    fcc_tcrc;       /* Tx temp CRC */
-} fccp_t;
-
-
-/* Ethernet controller through FCC.
-*/
-typedef struct fcc_enet {
-        fccp_t  fen_genfcc;
-        uint    fen_statbuf;    /* Internal status buffer */
-        uint    fen_camptr;     /* CAM address */
-        uint    fen_cmask;      /* Constant mask for CRC */
-        uint    fen_cpres;      /* Preset CRC */
-        uint    fen_crcec;      /* CRC Error counter */
-        uint    fen_alec;       /* alignment error counter */
-        uint    fen_disfc;      /* discard frame counter */
-        ushort  fen_retlim;     /* Retry limit */
-        ushort  fen_retcnt;     /* Retry counter */
-        ushort  fen_pper;       /* Persistence */
-        ushort  fen_boffcnt;    /* backoff counter */
-        uint    fen_gaddrh;     /* Group address filter, high 32-bits */
-        uint    fen_gaddrl;     /* Group address filter, low 32-bits */
-        ushort  fen_tfcstat;    /* out of sequence TxBD */
-        ushort  fen_tfclen;
-        uint    fen_tfcptr;
-        ushort  fen_mflr;       /* Maximum frame length (1518) */
-        ushort  fen_paddrh;     /* MAC address */
-        ushort  fen_paddrm;
-        ushort  fen_paddrl;
-        ushort  fen_ibdcount;   /* Internal BD counter */
-        ushort  fen_ibdstart;   /* Internal BD start pointer */
-        ushort  fen_ibdend;     /* Internal BD end pointer */
-        ushort  fen_txlen;      /* Internal Tx frame length counter */
-        uint    fen_ibdbase[8]; /* Internal use */
-        uint    fen_iaddrh;     /* Individual address filter */
-        uint    fen_iaddrl;
-        ushort  fen_minflr;     /* Minimum frame length (64) */
-        ushort  fen_taddrh;     /* Filter transfer MAC address */
-        ushort  fen_taddrm;
-        ushort  fen_taddrl;
-        ushort  fen_padptr;     /* Pointer to pad byte buffer */
-        ushort  fen_cftype;     /* control frame type */
-        ushort  fen_cfrange;    /* control frame range */
-        ushort  fen_maxb;       /* maximum BD count */
-        ushort  fen_maxd1;      /* Max DMA1 length (1520) */
-        ushort  fen_maxd2;      /* Max DMA2 length (1520) */
-        ushort  fen_maxd;       /* internal max DMA count */
-        ushort  fen_dmacnt;     /* internal DMA counter */
-        uint    fen_octc;       /* Total octect counter */
-        uint    fen_colc;       /* Total collision counter */
-        uint    fen_broc;       /* Total broadcast packet counter */
-        uint    fen_mulc;       /* Total multicast packet count */
-        uint    fen_uspc;       /* Total packets < 64 bytes */
-        uint    fen_frgc;       /* Total packets < 64 bytes with errors */
-        uint    fen_ospc;       /* Total packets > 1518 */
-        uint    fen_jbrc;       /* Total packets > 1518 with errors */
-        uint    fen_p64c;       /* Total packets == 64 bytes */
-        uint    fen_p65c;       /* Total packets 64 < bytes <= 127 */
-        uint    fen_p128c;      /* Total packets 127 < bytes <= 255 */
-        uint    fen_p256c;      /* Total packets 256 < bytes <= 511 */
-        uint    fen_p512c;      /* Total packets 512 < bytes <= 1023 */
-        uint    fen_p1024c;     /* Total packets 1024 < bytes <= 1518 */
-        uint    fen_cambuf;     /* Internal CAM buffer poiner */
-        ushort  fen_rfthr;      /* Received frames threshold */
-        ushort  fen_rfcnt;      /* Received frames count */
-} fcc_enet_t;
-
-/* FCC Event/Mask register as used by Ethernet.
-*/
-#define FCC_ENET_GRA    ((ushort)0x0080)        /* Graceful stop complete */
-#define FCC_ENET_RXC    ((ushort)0x0040)        /* Control Frame Received */
-#define FCC_ENET_TXC    ((ushort)0x0020)        /* Out of seq. Tx sent */
-#define FCC_ENET_TXE    ((ushort)0x0010)        /* Transmit Error */
-#define FCC_ENET_RXF    ((ushort)0x0008)        /* Full frame received */
-#define FCC_ENET_BSY    ((ushort)0x0004)        /* Busy.  Rx Frame dropped */
-#define FCC_ENET_TXB    ((ushort)0x0002)        /* A buffer was transmitted */
-#define FCC_ENET_RXB    ((ushort)0x0001)        /* A buffer was received */
-
-/* FCC Mode Register (FPSMR) as used by Ethernet.
-*/
-#define FCC_PSMR_HBC    ((uint)0x80000000)      /* Enable heartbeat */
-#define FCC_PSMR_FC     ((uint)0x40000000)      /* Force Collision */
-#define FCC_PSMR_SBT    ((uint)0x20000000)      /* Stop backoff timer */
-#define FCC_PSMR_LPB    ((uint)0x10000000)      /* Local protect. 1 = FDX */
-#define FCC_PSMR_LCW    ((uint)0x08000000)      /* Late collision select */
-#define FCC_PSMR_FDE    ((uint)0x04000000)      /* Full Duplex Enable */
-#define FCC_PSMR_MON    ((uint)0x02000000)      /* RMON Enable */
-#define FCC_PSMR_PRO    ((uint)0x00400000)      /* Promiscuous Enable */
-#define FCC_PSMR_FCE    ((uint)0x00200000)      /* Flow Control Enable */
-#define FCC_PSMR_RSH    ((uint)0x00100000)      /* Receive Short Frames */
-#define FCC_PSMR_CAM    ((uint)0x00000400)      /* CAM enable */
-#define FCC_PSMR_BRO    ((uint)0x00000200)      /* Broadcast pkt discard */
-#define FCC_PSMR_ENCRC  ((uint)0x00000080)      /* Use 32-bit CRC */
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
-        ushort  iic_rbase;      /* Rx Buffer descriptor base address */
-        ushort  iic_tbase;      /* Tx Buffer descriptor base address */
-        u_char  iic_rfcr;       /* Rx function code */
-        u_char  iic_tfcr;       /* Tx function code */
-        ushort  iic_mrblr;      /* Max receive buffer length */
-        uint    iic_rstate;     /* Internal */
-        uint    iic_rdp;        /* Internal */
-        ushort  iic_rbptr;      /* Internal */
-        ushort  iic_rbc;        /* Internal */
-        uint    iic_rxtmp;      /* Internal */
-        uint    iic_tstate;     /* Internal */
-        uint    iic_tdp;        /* Internal */
-        ushort  iic_tbptr;      /* Internal */
-        ushort  iic_tbc;        /* Internal */
-        uint    iic_txtmp;      /* Internal */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
-        ushort  spi_rbase;      /* Rx Buffer descriptor base address */
-        ushort  spi_tbase;      /* Tx Buffer descriptor base address */
-        u_char  spi_rfcr;       /* Rx function code */
-        u_char  spi_tfcr;       /* Tx function code */
-        ushort  spi_mrblr;      /* Max receive buffer length */
-        uint    spi_rstate;     /* Internal */
-        uint    spi_rdp;        /* Internal */
-        ushort  spi_rbptr;      /* Internal */
-        ushort  spi_rbc;        /* Internal */
-        uint    spi_rxtmp;      /* Internal */
-        uint    spi_tstate;     /* Internal */
-        uint    spi_tdp;        /* Internal */
-        ushort  spi_tbptr;      /* Internal */
-        ushort  spi_tbc;        /* Internal */
-        uint    spi_txtmp;      /* Internal */
-        uint    spi_res;        /* Tx temp. */
-        uint    spi_res1[4];    /* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP     ((ushort)0x4000)        /* Loopback */
-#define SPMODE_CI       ((ushort)0x2000)        /* Clock Invert */
-#define SPMODE_CP       ((ushort)0x1000)        /* Clock Phase */
-#define SPMODE_DIV16    ((ushort)0x0800)        /* BRG/16 mode */
-#define SPMODE_REV      ((ushort)0x0400)        /* Reversed Data */
-#define SPMODE_MSTR     ((ushort)0x0200)        /* SPI Master */
-#define SPMODE_EN       ((ushort)0x0100)        /* Enable */
-#define SPMODE_LENMSK   ((ushort)0x00f0)        /* character length */
-#define SPMODE_PMMSK    ((ushort)0x000f)        /* prescale modulus */
-
-#define SPMODE_LEN(x)   ((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x)    ((x) &0xF)
-
-#define SPI_EB          ((u_char)0x10)          /* big endian byte order */
-
-/* IDMA parameter RAM
-*/
-typedef struct idma {
-        ushort ibase;           /* IDMA buffer descriptor table base address */
-        ushort dcm;             /* DMA channel mode */
-        ushort ibdptr;          /* IDMA current buffer descriptor pointer */
-        ushort dpr_buf;         /* IDMA transfer buffer base address */
-        ushort buf_inv;         /* internal buffer inventory */
-        ushort ss_max;          /* steady-state maximum transfer size */
-        ushort dpr_in_ptr;      /* write pointer inside the internal buffer */
-        ushort sts;             /* source transfer size */
-        ushort dpr_out_ptr;     /* read pointer inside the internal buffer */
-        ushort seob;            /* source end of burst */
-        ushort deob;            /* destination end of burst */
-        ushort dts;             /* destination transfer size */
-        ushort ret_add;         /* return address when working in ERM=1 mode */
-        ushort res0;            /* reserved */
-        uint   bd_cnt;          /* internal byte count */
-        uint   s_ptr;           /* source internal data pointer */
-        uint   d_ptr;           /* destination internal data pointer */
-        uint   istate;          /* internal state */
-        u_char res1[20];        /* pad to 64-byte length */
-} idma_t;
-
-/* DMA channel mode bit fields
-*/
-#define IDMA_DCM_FB             ((ushort)0x8000) /* fly-by mode */
-#define IDMA_DCM_LP             ((ushort)0x4000) /* low priority */
-#define IDMA_DCM_TC2            ((ushort)0x0400) /* value driven on TC[2] */
-#define IDMA_DCM_DMA_WRAP_MASK  ((ushort)0x01c0) /* mask for DMA wrap */
-#define IDMA_DCM_DMA_WRAP_64    ((ushort)0x0000) /* 64-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_128   ((ushort)0x0040) /* 128-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_256   ((ushort)0x0080) /* 256-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_512   ((ushort)0x00c0) /* 512-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_1024  ((ushort)0x0100) /* 1024-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_2048  ((ushort)0x0140) /* 2048-byte DMA xfer buffer */
-#define IDMA_DCM_SINC           ((ushort)0x0020) /* source inc addr */
-#define IDMA_DCM_DINC           ((ushort)0x0010) /* destination inc addr */
-#define IDMA_DCM_ERM            ((ushort)0x0008) /* external request mode */
-#define IDMA_DCM_DT             ((ushort)0x0004) /* DONE treatment */
-#define IDMA_DCM_SD_MASK        ((ushort)0x0003) /* mask for SD bit field */
-#define IDMA_DCM_SD_MEM2MEM     ((ushort)0x0000) /* memory-to-memory xfer */
-#define IDMA_DCM_SD_PER2MEM     ((ushort)0x0002) /* peripheral-to-memory xfer */
-#define IDMA_DCM_SD_MEM2PER     ((ushort)0x0001) /* memory-to-peripheral xfer */
-
-/* IDMA Buffer Descriptors
-*/
-typedef struct idma_bd {
-        uint flags;
-        uint len;       /* data length */
-        uint src;       /* source data buffer pointer */
-        uint dst;       /* destination data buffer pointer */
-} idma_bd_t;
-
-/* IDMA buffer descriptor flag bit fields
-*/
-#define IDMA_BD_V       ((uint)0x80000000)      /* valid */
-#define IDMA_BD_W       ((uint)0x20000000)      /* wrap */
-#define IDMA_BD_I       ((uint)0x10000000)      /* interrupt */
-#define IDMA_BD_L       ((uint)0x08000000)      /* last */
-#define IDMA_BD_CM      ((uint)0x02000000)      /* continuous mode */
-#define IDMA_BD_SDN     ((uint)0x00400000)      /* source done */
-#define IDMA_BD_DDN     ((uint)0x00200000)      /* destination done */
-#define IDMA_BD_DGBL    ((uint)0x00100000)      /* destination global */
-#define IDMA_BD_DBO_LE  ((uint)0x00040000)      /* little-end dest byte order */
-#define IDMA_BD_DBO_BE  ((uint)0x00080000)      /* big-end dest byte order */
-#define IDMA_BD_DDTB    ((uint)0x00010000)      /* destination data bus */
-#define IDMA_BD_SGBL    ((uint)0x00002000)      /* source global */
-#define IDMA_BD_SBO_LE  ((uint)0x00000800)      /* little-end src byte order */
-#define IDMA_BD_SBO_BE  ((uint)0x00001000)      /* big-end src byte order */
-#define IDMA_BD_SDTB    ((uint)0x00000200)      /* source data bus */
-
-/* per-channel IDMA registers
-*/
-typedef struct im_idma {
-        u_char idsr;                    /* IDMAn event status register */
-        u_char res0[3];
-        u_char idmr;                    /* IDMAn event mask register */
-        u_char res1[3];
-} im_idma_t;
-
-/* IDMA event register bit fields
-*/
-#define IDMA_EVENT_SC   ((unsigned char)0x08)   /* stop completed */
-#define IDMA_EVENT_OB   ((unsigned char)0x04)   /* out of buffers */
-#define IDMA_EVENT_EDN  ((unsigned char)0x02)   /* external DONE asserted */
-#define IDMA_EVENT_BC   ((unsigned char)0x01)   /* buffer descriptor complete */
-
-/* RISC Controller Configuration Register (RCCR) bit fields
-*/
-#define RCCR_TIME       ((uint)0x80000000) /* timer enable */
-#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */
-#define RCCR_DR0M       ((uint)0x00800000) /* IDMA0 request mode */
-#define RCCR_DR1M       ((uint)0x00400000) /* IDMA1 request mode */
-#define RCCR_DR2M       ((uint)0x00000080) /* IDMA2 request mode */
-#define RCCR_DR3M       ((uint)0x00000040) /* IDMA3 request mode */
-#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */
-#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
-#define RCCR_DR0QP_MED  ((uint)0x00100000) /* IDMA0 has medium req priority */
-#define RCCR_DR0QP_LOW  ((uint)0x00200000) /* IDMA0 has low req priority */
-#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */
-#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
-#define RCCR_DR1QP_MED  ((uint)0x00010000) /* IDMA1 has medium req priority */
-#define RCCR_DR1QP_LOW  ((uint)0x00020000) /* IDMA1 has low req priority */
-#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */
-#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
-#define RCCR_DR2QP_MED  ((uint)0x00000010) /* IDMA2 has medium req priority */
-#define RCCR_DR2QP_LOW  ((uint)0x00000020) /* IDMA2 has low req priority */
-#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */
-#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
-#define RCCR_DR3QP_MED  ((uint)0x00000001) /* IDMA3 has medium req priority */
-#define RCCR_DR3QP_LOW  ((uint)0x00000002) /* IDMA3 has low req priority */
-#define RCCR_EIE        ((uint)0x00080000) /* external interrupt enable */
-#define RCCR_SCD        ((uint)0x00040000) /* scheduler configuration */
-#define RCCR_ERAM_MASK  ((uint)0x0000e000) /* mask for enable RAM microcode */
-#define RCCR_ERAM_0KB   ((uint)0x00000000) /* use 0KB of dpram for microcode */
-#define RCCR_ERAM_2KB   ((uint)0x00002000) /* use 2KB of dpram for microcode */
-#define RCCR_ERAM_4KB   ((uint)0x00004000) /* use 4KB of dpram for microcode */
-#define RCCR_ERAM_6KB   ((uint)0x00006000) /* use 6KB of dpram for microcode */
-#define RCCR_ERAM_8KB   ((uint)0x00008000) /* use 8KB of dpram for microcode */
-#define RCCR_ERAM_10KB  ((uint)0x0000a000) /* use 10KB of dpram for microcode */
-#define RCCR_ERAM_12KB  ((uint)0x0000c000) /* use 12KB of dpram for microcode */
-#define RCCR_EDM0       ((uint)0x00000800) /* DREQ0 edge detect mode */
-#define RCCR_EDM1       ((uint)0x00000400) /* DREQ1 edge detect mode */
-#define RCCR_EDM2       ((uint)0x00000200) /* DREQ2 edge detect mode */
-#define RCCR_EDM3       ((uint)0x00000100) /* DREQ3 edge detect mode */
-#define RCCR_DEM01      ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
-#define RCCR_DEM23      ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
-
-/*-----------------------------------------------------------------------
- * CMXFCR - CMX FCC Clock Route Register
- */
-#define CMXFCR_FC1         0x40000000   /* FCC1 connection              */
-#define CMXFCR_RF1CS_MSK   0x38000000   /* Receive FCC1 Clock Source Mask */
-#define CMXFCR_TF1CS_MSK   0x07000000   /* Transmit FCC1 Clock Source Mask */
-#define CMXFCR_FC2         0x00400000   /* FCC2 connection              */
-#define CMXFCR_RF2CS_MSK   0x00380000   /* Receive FCC2 Clock Source Mask */
-#define CMXFCR_TF2CS_MSK   0x00070000   /* Transmit FCC2 Clock Source Mask */
-#define CMXFCR_FC3         0x00004000   /* FCC3 connection              */
-#define CMXFCR_RF3CS_MSK   0x00003800   /* Receive FCC3 Clock Source Mask */
-#define CMXFCR_TF3CS_MSK   0x00000700   /* Transmit FCC3 Clock Source Mask */
-
-#define CMXFCR_RF1CS_BRG5  0x00000000   /* Receive FCC1 Clock Source is BRG5 */
-#define CMXFCR_RF1CS_BRG6  0x08000000   /* Receive FCC1 Clock Source is BRG6 */
-#define CMXFCR_RF1CS_BRG7  0x10000000   /* Receive FCC1 Clock Source is BRG7 */
-#define CMXFCR_RF1CS_BRG8  0x18000000   /* Receive FCC1 Clock Source is BRG8 */
-#define CMXFCR_RF1CS_CLK9  0x20000000   /* Receive FCC1 Clock Source is CLK9 */
-#define CMXFCR_RF1CS_CLK10 0x28000000   /* Receive FCC1 Clock Source is CLK10 */
-#define CMXFCR_RF1CS_CLK11 0x30000000   /* Receive FCC1 Clock Source is CLK11 */
-#define CMXFCR_RF1CS_CLK12 0x38000000   /* Receive FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_TF1CS_BRG5  0x00000000   /* Transmit FCC1 Clock Source is BRG5 */
-#define CMXFCR_TF1CS_BRG6  0x01000000   /* Transmit FCC1 Clock Source is BRG6 */
-#define CMXFCR_TF1CS_BRG7  0x02000000   /* Transmit FCC1 Clock Source is BRG7 */
-#define CMXFCR_TF1CS_BRG8  0x03000000   /* Transmit FCC1 Clock Source is BRG8 */
-#define CMXFCR_TF1CS_CLK9  0x04000000   /* Transmit FCC1 Clock Source is CLK9 */
-#define CMXFCR_TF1CS_CLK10 0x05000000   /* Transmit FCC1 Clock Source is CLK10 */
-#define CMXFCR_TF1CS_CLK11 0x06000000   /* Transmit FCC1 Clock Source is CLK11 */
-#define CMXFCR_TF1CS_CLK12 0x07000000   /* Transmit FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_RF2CS_BRG5  0x00000000   /* Receive FCC2 Clock Source is BRG5 */
-#define CMXFCR_RF2CS_BRG6  0x00080000   /* Receive FCC2 Clock Source is BRG6 */
-#define CMXFCR_RF2CS_BRG7  0x00100000   /* Receive FCC2 Clock Source is BRG7 */
-#define CMXFCR_RF2CS_BRG8  0x00180000   /* Receive FCC2 Clock Source is BRG8 */
-#define CMXFCR_RF2CS_CLK13 0x00200000   /* Receive FCC2 Clock Source is CLK13 */
-#define CMXFCR_RF2CS_CLK14 0x00280000   /* Receive FCC2 Clock Source is CLK14 */
-#define CMXFCR_RF2CS_CLK15 0x00300000   /* Receive FCC2 Clock Source is CLK15 */
-#define CMXFCR_RF2CS_CLK16 0x00380000   /* Receive FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_TF2CS_BRG5  0x00000000   /* Transmit FCC2 Clock Source is BRG5 */
-#define CMXFCR_TF2CS_BRG6  0x00010000   /* Transmit FCC2 Clock Source is BRG6 */
-#define CMXFCR_TF2CS_BRG7  0x00020000   /* Transmit FCC2 Clock Source is BRG7 */
-#define CMXFCR_TF2CS_BRG8  0x00030000   /* Transmit FCC2 Clock Source is BRG8 */
-#define CMXFCR_TF2CS_CLK13 0x00040000   /* Transmit FCC2 Clock Source is CLK13 */
-#define CMXFCR_TF2CS_CLK14 0x00050000   /* Transmit FCC2 Clock Source is CLK14 */
-#define CMXFCR_TF2CS_CLK15 0x00060000   /* Transmit FCC2 Clock Source is CLK15 */
-#define CMXFCR_TF2CS_CLK16 0x00070000   /* Transmit FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_RF3CS_BRG5  0x00000000   /* Receive FCC3 Clock Source is BRG5 */
-#define CMXFCR_RF3CS_BRG6  0x00000800   /* Receive FCC3 Clock Source is BRG6 */
-#define CMXFCR_RF3CS_BRG7  0x00001000   /* Receive FCC3 Clock Source is BRG7 */
-#define CMXFCR_RF3CS_BRG8  0x00001800   /* Receive FCC3 Clock Source is BRG8 */
-#define CMXFCR_RF3CS_CLK13 0x00002000   /* Receive FCC3 Clock Source is CLK13 */
-#define CMXFCR_RF3CS_CLK14 0x00002800   /* Receive FCC3 Clock Source is CLK14 */
-#define CMXFCR_RF3CS_CLK15 0x00003000   /* Receive FCC3 Clock Source is CLK15 */
-#define CMXFCR_RF3CS_CLK16 0x00003800   /* Receive FCC3 Clock Source is CLK16 */
-
-#define CMXFCR_TF3CS_BRG5  0x00000000   /* Transmit FCC3 Clock Source is BRG5 */
-#define CMXFCR_TF3CS_BRG6  0x00000100   /* Transmit FCC3 Clock Source is BRG6 */
-#define CMXFCR_TF3CS_BRG7  0x00000200   /* Transmit FCC3 Clock Source is BRG7 */
-#define CMXFCR_TF3CS_BRG8  0x00000300   /* Transmit FCC3 Clock Source is BRG8 */
-#define CMXFCR_TF3CS_CLK13 0x00000400   /* Transmit FCC3 Clock Source is CLK13 */
-#define CMXFCR_TF3CS_CLK14 0x00000500   /* Transmit FCC3 Clock Source is CLK14 */
-#define CMXFCR_TF3CS_CLK15 0x00000600   /* Transmit FCC3 Clock Source is CLK15 */
-#define CMXFCR_TF3CS_CLK16 0x00000700   /* Transmit FCC3 Clock Source is CLK16 */
-
-/*-----------------------------------------------------------------------
- * CMXSCR - CMX SCC Clock Route Register
- */
-#define CMXSCR_GR1         0x80000000   /* Grant Support of SCC1        */
-#define CMXSCR_SC1         0x40000000   /* SCC1 connection              */
-#define CMXSCR_RS1CS_MSK   0x38000000   /* Receive SCC1 Clock Source Mask */
-#define CMXSCR_TS1CS_MSK   0x07000000   /* Transmit SCC1 Clock Source Mask */
-#define CMXSCR_GR2         0x00800000   /* Grant Support of SCC2        */
-#define CMXSCR_SC2         0x00400000   /* SCC2 connection              */
-#define CMXSCR_RS2CS_MSK   0x00380000   /* Receive SCC2 Clock Source Mask */
-#define CMXSCR_TS2CS_MSK   0x00070000   /* Transmit SCC2 Clock Source Mask */
-#define CMXSCR_GR3         0x00008000   /* Grant Support of SCC3        */
-#define CMXSCR_SC3         0x00004000   /* SCC3 connection              */
-#define CMXSCR_RS3CS_MSK   0x00003800   /* Receive SCC3 Clock Source Mask */
-#define CMXSCR_TS3CS_MSK   0x00000700   /* Transmit SCC3 Clock Source Mask */
-#define CMXSCR_GR4         0x00000080   /* Grant Support of SCC4        */
-#define CMXSCR_SC4         0x00000040   /* SCC4 connection              */
-#define CMXSCR_RS4CS_MSK   0x00000038   /* Receive SCC4 Clock Source Mask */
-#define CMXSCR_TS4CS_MSK   0x00000007   /* Transmit SCC4 Clock Source Mask */
-
-#define CMXSCR_RS1CS_BRG1  0x00000000   /* SCC1 Rx Clock Source is BRG1 */
-#define CMXSCR_RS1CS_BRG2  0x08000000   /* SCC1 Rx Clock Source is BRG2 */
-#define CMXSCR_RS1CS_BRG3  0x10000000   /* SCC1 Rx Clock Source is BRG3 */
-#define CMXSCR_RS1CS_BRG4  0x18000000   /* SCC1 Rx Clock Source is BRG4 */
-#define CMXSCR_RS1CS_CLK11 0x20000000   /* SCC1 Rx Clock Source is CLK11 */
-#define CMXSCR_RS1CS_CLK12 0x28000000   /* SCC1 Rx Clock Source is CLK12 */
-#define CMXSCR_RS1CS_CLK3  0x30000000   /* SCC1 Rx Clock Source is CLK3 */
-#define CMXSCR_RS1CS_CLK4  0x38000000   /* SCC1 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS1CS_BRG1  0x00000000   /* SCC1 Tx Clock Source is BRG1 */
-#define CMXSCR_TS1CS_BRG2  0x01000000   /* SCC1 Tx Clock Source is BRG2 */
-#define CMXSCR_TS1CS_BRG3  0x02000000   /* SCC1 Tx Clock Source is BRG3 */
-#define CMXSCR_TS1CS_BRG4  0x03000000   /* SCC1 Tx Clock Source is BRG4 */
-#define CMXSCR_TS1CS_CLK11 0x04000000   /* SCC1 Tx Clock Source is CLK11 */
-#define CMXSCR_TS1CS_CLK12 0x05000000   /* SCC1 Tx Clock Source is CLK12 */
-#define CMXSCR_TS1CS_CLK3  0x06000000   /* SCC1 Tx Clock Source is CLK3 */
-#define CMXSCR_TS1CS_CLK4  0x07000000   /* SCC1 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS2CS_BRG1  0x00000000   /* SCC2 Rx Clock Source is BRG1 */
-#define CMXSCR_RS2CS_BRG2  0x00080000   /* SCC2 Rx Clock Source is BRG2 */
-#define CMXSCR_RS2CS_BRG3  0x00100000   /* SCC2 Rx Clock Source is BRG3 */
-#define CMXSCR_RS2CS_BRG4  0x00180000   /* SCC2 Rx Clock Source is BRG4 */
-#define CMXSCR_RS2CS_CLK11 0x00200000   /* SCC2 Rx Clock Source is CLK11 */
-#define CMXSCR_RS2CS_CLK12 0x00280000   /* SCC2 Rx Clock Source is CLK12 */
-#define CMXSCR_RS2CS_CLK3  0x00300000   /* SCC2 Rx Clock Source is CLK3 */
-#define CMXSCR_RS2CS_CLK4  0x00380000   /* SCC2 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS2CS_BRG1  0x00000000   /* SCC2 Tx Clock Source is BRG1 */
-#define CMXSCR_TS2CS_BRG2  0x00010000   /* SCC2 Tx Clock Source is BRG2 */
-#define CMXSCR_TS2CS_BRG3  0x00020000   /* SCC2 Tx Clock Source is BRG3 */
-#define CMXSCR_TS2CS_BRG4  0x00030000   /* SCC2 Tx Clock Source is BRG4 */
-#define CMXSCR_TS2CS_CLK11 0x00040000   /* SCC2 Tx Clock Source is CLK11 */
-#define CMXSCR_TS2CS_CLK12 0x00050000   /* SCC2 Tx Clock Source is CLK12 */
-#define CMXSCR_TS2CS_CLK3  0x00060000   /* SCC2 Tx Clock Source is CLK3 */
-#define CMXSCR_TS2CS_CLK4  0x00070000   /* SCC2 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS3CS_BRG1  0x00000000   /* SCC3 Rx Clock Source is BRG1 */
-#define CMXSCR_RS3CS_BRG2  0x00000800   /* SCC3 Rx Clock Source is BRG2 */
-#define CMXSCR_RS3CS_BRG3  0x00001000   /* SCC3 Rx Clock Source is BRG3 */
-#define CMXSCR_RS3CS_BRG4  0x00001800   /* SCC3 Rx Clock Source is BRG4 */
-#define CMXSCR_RS3CS_CLK5  0x00002000   /* SCC3 Rx Clock Source is CLK5 */
-#define CMXSCR_RS3CS_CLK6  0x00002800   /* SCC3 Rx Clock Source is CLK6 */
-#define CMXSCR_RS3CS_CLK7  0x00003000   /* SCC3 Rx Clock Source is CLK7 */
-#define CMXSCR_RS3CS_CLK8  0x00003800   /* SCC3 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS3CS_BRG1  0x00000000   /* SCC3 Tx Clock Source is BRG1 */
-#define CMXSCR_TS3CS_BRG2  0x00000100   /* SCC3 Tx Clock Source is BRG2 */
-#define CMXSCR_TS3CS_BRG3  0x00000200   /* SCC3 Tx Clock Source is BRG3 */
-#define CMXSCR_TS3CS_BRG4  0x00000300   /* SCC3 Tx Clock Source is BRG4 */
-#define CMXSCR_TS3CS_CLK5  0x00000400   /* SCC3 Tx Clock Source is CLK5 */
-#define CMXSCR_TS3CS_CLK6  0x00000500   /* SCC3 Tx Clock Source is CLK6 */
-#define CMXSCR_TS3CS_CLK7  0x00000600   /* SCC3 Tx Clock Source is CLK7 */
-#define CMXSCR_TS3CS_CLK8  0x00000700   /* SCC3 Tx Clock Source is CLK8 */
-
-#define CMXSCR_RS4CS_BRG1  0x00000000   /* SCC4 Rx Clock Source is BRG1 */
-#define CMXSCR_RS4CS_BRG2  0x00000008   /* SCC4 Rx Clock Source is BRG2 */
-#define CMXSCR_RS4CS_BRG3  0x00000010   /* SCC4 Rx Clock Source is BRG3 */
-#define CMXSCR_RS4CS_BRG4  0x00000018   /* SCC4 Rx Clock Source is BRG4 */
-#define CMXSCR_RS4CS_CLK5  0x00000020   /* SCC4 Rx Clock Source is CLK5 */
-#define CMXSCR_RS4CS_CLK6  0x00000028   /* SCC4 Rx Clock Source is CLK6 */
-#define CMXSCR_RS4CS_CLK7  0x00000030   /* SCC4 Rx Clock Source is CLK7 */
-#define CMXSCR_RS4CS_CLK8  0x00000038   /* SCC4 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS4CS_BRG1  0x00000000   /* SCC4 Tx Clock Source is BRG1 */
-#define CMXSCR_TS4CS_BRG2  0x00000001   /* SCC4 Tx Clock Source is BRG2 */
-#define CMXSCR_TS4CS_BRG3  0x00000002   /* SCC4 Tx Clock Source is BRG3 */
-#define CMXSCR_TS4CS_BRG4  0x00000003   /* SCC4 Tx Clock Source is BRG4 */
-#define CMXSCR_TS4CS_CLK5  0x00000004   /* SCC4 Tx Clock Source is CLK5 */
-#define CMXSCR_TS4CS_CLK6  0x00000005   /* SCC4 Tx Clock Source is CLK6 */
-#define CMXSCR_TS4CS_CLK7  0x00000006   /* SCC4 Tx Clock Source is CLK7 */
-#define CMXSCR_TS4CS_CLK8  0x00000007   /* SCC4 Tx Clock Source is CLK8 */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration Register                            4-31
- */
-#define SIUMCR_BBD      0x80000000      /* Bus Busy Disable             */
-#define SIUMCR_ESE      0x40000000      /* External Snoop Enable        */
-#define SIUMCR_PBSE     0x20000000      /* Parity Byte Select Enable    */
-#define SIUMCR_CDIS     0x10000000      /* Core Disable                 */
-#define SIUMCR_DPPC00   0x00000000      /* Data Parity Pins Configuration*/
-#define SIUMCR_DPPC01   0x04000000      /* - " -                        */
-#define SIUMCR_DPPC10   0x08000000      /* - " -                        */
-#define SIUMCR_DPPC11   0x0c000000      /* - " -                        */
-#define SIUMCR_L2CPC00  0x00000000      /* L2 Cache Pins Configuration  */
-#define SIUMCR_L2CPC01  0x01000000      /* - " -                        */
-#define SIUMCR_L2CPC10  0x02000000      /* - " -                        */
-#define SIUMCR_L2CPC11  0x03000000      /* - " -                        */
-#define SIUMCR_LBPC00   0x00000000      /* Local Bus Pins Configuration */
-#define SIUMCR_LBPC01   0x00400000      /* - " -                        */
-#define SIUMCR_LBPC10   0x00800000      /* - " -                        */
-#define SIUMCR_LBPC11   0x00c00000      /* - " -                        */
-#define SIUMCR_APPC00   0x00000000      /* Address Parity Pins Configuration*/
-#define SIUMCR_APPC01   0x00100000      /* - " -                        */
-#define SIUMCR_APPC10   0x00200000      /* - " -                        */
-#define SIUMCR_APPC11   0x00300000      /* - " -                        */
-#define SIUMCR_CS10PC00 0x00000000      /* CS10 Pin Configuration       */
-#define SIUMCR_CS10PC01 0x00040000      /* - " -                        */
-#define SIUMCR_CS10PC10 0x00080000      /* - " -                        */
-#define SIUMCR_CS10PC11 0x000c0000      /* - " -                        */
-#define SIUMCR_BCTLC00  0x00000000      /* Buffer Control Configuration */
-#define SIUMCR_BCTLC01  0x00010000      /* - " -                        */
-#define SIUMCR_BCTLC10  0x00020000      /* - " -                        */
-#define SIUMCR_BCTLC11  0x00030000      /* - " -                        */
-#define SIUMCR_MMR00    0x00000000      /* Mask Masters Requests        */
-#define SIUMCR_MMR01    0x00004000      /* - " -                        */
-#define SIUMCR_MMR10    0x00008000      /* - " -                        */
-#define SIUMCR_MMR11    0x0000c000      /* - " -                        */
-#define SIUMCR_LPBSE    0x00002000      /* LocalBus Parity Byte Select Enable*/
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control Register                                  9-8
-*/
-#define SCCR_PCI_MODE   0x00000100      /* PCI Mode     */
-#define SCCR_PCI_MODCK  0x00000080      /* Value of PCI_MODCK pin       */
-#define SCCR_PCIDF_MSK  0x00000078      /* PCI division factor  */
-#define SCCR_PCIDF_SHIFT 3
-
-#ifndef CPM_IMMR_OFFSET
-#define CPM_IMMR_OFFSET 0x101a8
-#endif
-
-#define FCC_PSMR_RMII   ((uint)0x00020000)      /* Use RMII interface */
-
-/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
- * in order to use clock-computing stuff below for the FCC x
- */
-
-/* Automatically generates register configurations */
-#define PC_CLK(x)       ((uint)(1<<(x-1)))      /* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27))     /* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24))     /* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19))     /* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))     /* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11))     /* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))      /* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK      PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK      PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE  (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK   ((uint)0xff000000)
-
-#define PC_F2RXCLK      PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK      PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE  (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK   ((uint)0x00ff0000)
-
-#define PC_F3RXCLK      PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK      PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE  (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK   ((uint)0x0000ff00)
-
-#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
-#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
-
-#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
-
-/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL         0x00000001U
-#define PA1_CRS         0x00000002U
-#define PA1_TXER        0x00000004U
-#define PA1_TXEN        0x00000008U
-#define PA1_RXDV        0x00000010U
-#define PA1_RXER        0x00000020U
-#define PA1_TXDAT       0x00003c00U
-#define PA1_RXDAT       0x0003c000U
-#define PA1_PSORA0      (PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA1      (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
-                PA1_RXDV | PA1_RXER)
-#define PA1_DIRA0       (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA1       (PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER        0x00000001U
-#define PB2_RXDV        0x00000002U
-#define PB2_TXEN        0x00000004U
-#define PB2_RXER        0x00000008U
-#define PB2_COL         0x00000010U
-#define PB2_CRS         0x00000020U
-#define PB2_TXDAT       0x000003c0U
-#define PB2_RXDAT       0x00003c00U
-#define PB2_PSORB0      (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
-                PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB1      (PB2_TXEN)
-#define PB2_DIRB0       (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB1       (PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV        0x00004000U
-#define PB3_RXER        0x00008000U
-#define PB3_TXER        0x00010000U
-#define PB3_TXEN        0x00020000U
-#define PB3_COL         0x00040000U
-#define PB3_CRS         0x00080000U
-#define PB3_TXDAT       0x0f000000U
-#define PC3_TXDAT       0x00000010U
-#define PB3_RXDAT       0x00f00000U
-#define PB3_PSORB0      (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
-                PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB1      0
-#define PB3_DIRB0       (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB1       (PB3_TXDAT | PB3_TXEN | PB3_TXER)
-#define PC3_DIRC1       (PC3_TXDAT)
-
-/* Handy macro to specify mem for FCCs*/
-#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
-#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
-#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
-#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
-
-/* Clocks and GRG's */
-
-enum cpm_clk_dir {
-        CPM_CLK_RX,
-        CPM_CLK_TX,
-        CPM_CLK_RTX
-};
-
-enum cpm_clk_target {
-        CPM_CLK_SCC1,
-        CPM_CLK_SCC2,
-        CPM_CLK_SCC3,
-        CPM_CLK_SCC4,
-        CPM_CLK_FCC1,
-        CPM_CLK_FCC2,
-        CPM_CLK_FCC3,
-        CPM_CLK_SMC1,
-        CPM_CLK_SMC2,
-};
-
-enum cpm_clk {
-        CPM_CLK_NONE = 0,
-        CPM_BRG1,       /* Baud Rate Generator  1 */
-        CPM_BRG2,       /* Baud Rate Generator  2 */
-        CPM_BRG3,       /* Baud Rate Generator  3 */
-        CPM_BRG4,       /* Baud Rate Generator  4 */
-        CPM_BRG5,       /* Baud Rate Generator  5 */
-        CPM_BRG6,       /* Baud Rate Generator  6 */
-        CPM_BRG7,       /* Baud Rate Generator  7 */
-        CPM_BRG8,       /* Baud Rate Generator  8 */
-        CPM_CLK1,       /* Clock  1 */
-        CPM_CLK2,       /* Clock  2 */
-        CPM_CLK3,       /* Clock  3 */
-        CPM_CLK4,       /* Clock  4 */
-        CPM_CLK5,       /* Clock  5 */
-        CPM_CLK6,       /* Clock  6 */
-        CPM_CLK7,       /* Clock  7 */
-        CPM_CLK8,       /* Clock  8 */
-        CPM_CLK9,       /* Clock  9 */
-        CPM_CLK10,      /* Clock 10 */
-        CPM_CLK11,      /* Clock 11 */
-        CPM_CLK12,      /* Clock 12 */
-        CPM_CLK13,      /* Clock 13 */
-        CPM_CLK14,      /* Clock 14 */
-        CPM_CLK15,      /* Clock 15 */
-        CPM_CLK16,      /* Clock 16 */
-        CPM_CLK17,      /* Clock 17 */
-        CPM_CLK18,      /* Clock 18 */
-        CPM_CLK19,      /* Clock 19 */
-        CPM_CLK20,      /* Clock 20 */
-        CPM_CLK_DUMMY
-};
-
-extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
-extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
-
-#define CPM_PIN_INPUT     0
-#define CPM_PIN_OUTPUT    1
-#define CPM_PIN_PRIMARY   0
-#define CPM_PIN_SECONDARY 2
-#define CPM_PIN_GPIO      4
-#define CPM_PIN_OPENDRAIN 8
-
-void cpm2_set_pin(int port, int pin, int flags);
-
-#endif /* __CPM2__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
deleted file mode 100644
index ef8a248dfd55..000000000000
--- a/include/asm-powerpc/cputable.h
+++ /dev/null
@@ -1,514 +0,0 @@
-#ifndef __ASM_POWERPC_CPUTABLE_H
-#define __ASM_POWERPC_CPUTABLE_H
-
-#define PPC_FEATURE_32                  0x80000000
-#define PPC_FEATURE_64                  0x40000000
-#define PPC_FEATURE_601_INSTR           0x20000000
-#define PPC_FEATURE_HAS_ALTIVEC         0x10000000
-#define PPC_FEATURE_HAS_FPU             0x08000000
-#define PPC_FEATURE_HAS_MMU             0x04000000
-#define PPC_FEATURE_HAS_4xxMAC          0x02000000
-#define PPC_FEATURE_UNIFIED_CACHE       0x01000000
-#define PPC_FEATURE_HAS_SPE             0x00800000
-#define PPC_FEATURE_HAS_EFP_SINGLE      0x00400000
-#define PPC_FEATURE_HAS_EFP_DOUBLE      0x00200000
-#define PPC_FEATURE_NO_TB               0x00100000
-#define PPC_FEATURE_POWER4              0x00080000
-#define PPC_FEATURE_POWER5              0x00040000
-#define PPC_FEATURE_POWER5_PLUS         0x00020000
-#define PPC_FEATURE_CELL                0x00010000
-#define PPC_FEATURE_BOOKE               0x00008000
-#define PPC_FEATURE_SMT                 0x00004000
-#define PPC_FEATURE_ICACHE_SNOOP        0x00002000
-#define PPC_FEATURE_ARCH_2_05           0x00001000
-#define PPC_FEATURE_PA6T                0x00000800
-#define PPC_FEATURE_HAS_DFP             0x00000400
-#define PPC_FEATURE_POWER6_EXT          0x00000200
-#define PPC_FEATURE_ARCH_2_06           0x00000100
-#define PPC_FEATURE_HAS_VSX             0x00000080
-
-#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
-                                        0x00000040
-
-#define PPC_FEATURE_TRUE_LE             0x00000002
-#define PPC_FEATURE_PPC_LE              0x00000001
-
-#ifdef __KERNEL__
-
-#include <asm/asm-compat.h>
-#include <asm/feature-fixups.h>
-
-#ifndef __ASSEMBLY__
-
-/* This structure can grow, it's real size is used by head.S code
- * via the mkdefs mechanism.
- */
-struct cpu_spec;
-
-typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
-typedef void (*cpu_restore_t)(void);
-
-enum powerpc_oprofile_type {
-        PPC_OPROFILE_INVALID = 0,
-        PPC_OPROFILE_RS64 = 1,
-        PPC_OPROFILE_POWER4 = 2,
-        PPC_OPROFILE_G4 = 3,
-        PPC_OPROFILE_FSL_EMB = 4,
-        PPC_OPROFILE_CELL = 5,
-        PPC_OPROFILE_PA6T = 6,
-};
-
-enum powerpc_pmc_type {
-        PPC_PMC_DEFAULT = 0,
-        PPC_PMC_IBM = 1,
-        PPC_PMC_PA6T = 2,
-};
-
-struct pt_regs;
-
-extern int machine_check_generic(struct pt_regs *regs);
-extern int machine_check_4xx(struct pt_regs *regs);
-extern int machine_check_440A(struct pt_regs *regs);
-extern int machine_check_e500(struct pt_regs *regs);
-extern int machine_check_e200(struct pt_regs *regs);
-
-/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
-struct cpu_spec {
-        /* CPU is matched via (PVR & pvr_mask) == pvr_value */
-        unsigned int    pvr_mask;
-        unsigned int    pvr_value;
-
-        char            *cpu_name;
-        unsigned long   cpu_features;           /* Kernel features */
-        unsigned int    cpu_user_features;      /* Userland features */
-
-        /* cache line sizes */
-        unsigned int    icache_bsize;
-        unsigned int    dcache_bsize;
-
-        /* number of performance monitor counters */
-        unsigned int    num_pmcs;
-        enum powerpc_pmc_type pmc_type;
-
-        /* this is called to initialize various CPU bits like L1 cache,
-         * BHT, SPD, etc... from head.S before branching to identify_machine
-         */
-        cpu_setup_t     cpu_setup;
-        /* Used to restore cpu setup on secondary processors and at resume */
-        cpu_restore_t   cpu_restore;
-
-        /* Used by oprofile userspace to select the right counters */
-        char            *oprofile_cpu_type;
-
-        /* Processor specific oprofile operations */
-        enum powerpc_oprofile_type oprofile_type;
-
-        /* Bit locations inside the mmcra change */
-        unsigned long   oprofile_mmcra_sihv;
-        unsigned long   oprofile_mmcra_sipr;
-
-        /* Bits to clear during an oprofile exception */
-        unsigned long   oprofile_mmcra_clear;
-
-        /* Name of processor class, for the ELF AT_PLATFORM entry */
-        char            *platform;
-
-        /* Processor specific machine check handling. Return negative
-         * if the error is fatal, 1 if it was fully recovered and 0 to
-         * pass up (not CPU originated) */
-        int             (*machine_check)(struct pt_regs *regs);
-};
-
-extern struct cpu_spec          *cur_cpu_spec;
-
-extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
-
-extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
-extern void do_feature_fixups(unsigned long value, void *fixup_start,
-                              void *fixup_end);
-
-extern const char *powerpc_base_platform;
-
-#endif /* __ASSEMBLY__ */
-
-/* CPU kernel features */
-
-/* Retain the 32b definitions all use bottom half of word */
-#define CPU_FTR_COHERENT_ICACHE         ASM_CONST(0x0000000000000001)
-#define CPU_FTR_L2CR                    ASM_CONST(0x0000000000000002)
-#define CPU_FTR_SPEC7450                ASM_CONST(0x0000000000000004)
-#define CPU_FTR_ALTIVEC                 ASM_CONST(0x0000000000000008)
-#define CPU_FTR_TAU                     ASM_CONST(0x0000000000000010)
-#define CPU_FTR_CAN_DOZE                ASM_CONST(0x0000000000000020)
-#define CPU_FTR_USE_TB                  ASM_CONST(0x0000000000000040)
-#define CPU_FTR_L2CSR                   ASM_CONST(0x0000000000000080)
-#define CPU_FTR_601                     ASM_CONST(0x0000000000000100)
-#define CPU_FTR_HPTE_TABLE              ASM_CONST(0x0000000000000200)
-#define CPU_FTR_CAN_NAP                 ASM_CONST(0x0000000000000400)
-#define CPU_FTR_L3CR                    ASM_CONST(0x0000000000000800)
-#define CPU_FTR_L3_DISABLE_NAP          ASM_CONST(0x0000000000001000)
-#define CPU_FTR_NAP_DISABLE_L2_PR       ASM_CONST(0x0000000000002000)
-#define CPU_FTR_DUAL_PLL_750FX          ASM_CONST(0x0000000000004000)
-#define CPU_FTR_NO_DPM                  ASM_CONST(0x0000000000008000)
-#define CPU_FTR_HAS_HIGH_BATS           ASM_CONST(0x0000000000010000)
-#define CPU_FTR_NEED_COHERENT           ASM_CONST(0x0000000000020000)
-#define CPU_FTR_NO_BTIC                 ASM_CONST(0x0000000000040000)
-#define CPU_FTR_BIG_PHYS                ASM_CONST(0x0000000000080000)
-#define CPU_FTR_NODSISRALIGN            ASM_CONST(0x0000000000100000)
-#define CPU_FTR_PPC_LE                  ASM_CONST(0x0000000000200000)
-#define CPU_FTR_REAL_LE                 ASM_CONST(0x0000000000400000)
-#define CPU_FTR_FPU_UNAVAILABLE         ASM_CONST(0x0000000000800000)
-#define CPU_FTR_UNIFIED_ID_CACHE        ASM_CONST(0x0000000001000000)
-#define CPU_FTR_SPE                     ASM_CONST(0x0000000002000000)
-#define CPU_FTR_NEED_PAIRED_STWCX       ASM_CONST(0x0000000004000000)
-#define CPU_FTR_LWSYNC                  ASM_CONST(0x0000000008000000)
-
-/*
- * Add the 64-bit processor unique features in the top half of the word;
- * on 32-bit, make the names available but defined to be 0.
- */
-#ifdef __powerpc64__
-#define LONG_ASM_CONST(x)               ASM_CONST(x)
-#else
-#define LONG_ASM_CONST(x)               0
-#endif
-
-#define CPU_FTR_SLB                     LONG_ASM_CONST(0x0000000100000000)
-#define CPU_FTR_16M_PAGE                LONG_ASM_CONST(0x0000000200000000)
-#define CPU_FTR_TLBIEL                  LONG_ASM_CONST(0x0000000400000000)
-#define CPU_FTR_NOEXECUTE               LONG_ASM_CONST(0x0000000800000000)
-#define CPU_FTR_IABR                    LONG_ASM_CONST(0x0000002000000000)
-#define CPU_FTR_MMCRA                   LONG_ASM_CONST(0x0000004000000000)
-#define CPU_FTR_CTRL                    LONG_ASM_CONST(0x0000008000000000)
-#define CPU_FTR_SMT                     LONG_ASM_CONST(0x0000010000000000)
-#define CPU_FTR_LOCKLESS_TLBIE          LONG_ASM_CONST(0x0000040000000000)
-#define CPU_FTR_CI_LARGE_PAGE           LONG_ASM_CONST(0x0000100000000000)
-#define CPU_FTR_PAUSE_ZERO              LONG_ASM_CONST(0x0000200000000000)
-#define CPU_FTR_PURR                    LONG_ASM_CONST(0x0000400000000000)
-#define CPU_FTR_CELL_TB_BUG             LONG_ASM_CONST(0x0000800000000000)
-#define CPU_FTR_SPURR                   LONG_ASM_CONST(0x0001000000000000)
-#define CPU_FTR_DSCR                    LONG_ASM_CONST(0x0002000000000000)
-#define CPU_FTR_1T_SEGMENT              LONG_ASM_CONST(0x0004000000000000)
-#define CPU_FTR_NO_SLBIE_B              LONG_ASM_CONST(0x0008000000000000)
-#define CPU_FTR_VSX                     LONG_ASM_CONST(0x0010000000000000)
-#define CPU_FTR_SAO                     LONG_ASM_CONST(0x0020000000000000)
-
-#ifndef __ASSEMBLY__
-
-#define CPU_FTR_PPCAS_ARCH_V2   (CPU_FTR_SLB | \
-                                 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
-                                 CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
-
-/* We only set the altivec features if the kernel was compiled with altivec
- * support
- */
-#ifdef CONFIG_ALTIVEC
-#define CPU_FTR_ALTIVEC_COMP    CPU_FTR_ALTIVEC
-#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC
-#else
-#define CPU_FTR_ALTIVEC_COMP    0
-#define PPC_FEATURE_HAS_ALTIVEC_COMP    0
-#endif
-
-/* We only set the VSX features if the kernel was compiled with VSX
- * support
- */
-#ifdef CONFIG_VSX
-#define CPU_FTR_VSX_COMP        CPU_FTR_VSX
-#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX
-#else
-#define CPU_FTR_VSX_COMP        0
-#define PPC_FEATURE_HAS_VSX_COMP    0
-#endif
-
-/* We only set the spe features if the kernel was compiled with spe
- * support
- */
-#ifdef CONFIG_SPE
-#define CPU_FTR_SPE_COMP        CPU_FTR_SPE
-#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE
-#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE
-#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE
-#else
-#define CPU_FTR_SPE_COMP        0
-#define PPC_FEATURE_HAS_SPE_COMP    0
-#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0
-#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0
-#endif
-
-/* We need to mark all pages as being coherent if we're SMP or we have a
- * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
- * require it for PCI "streaming/prefetch" to work properly.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
-        || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
-#define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
-#else
-#define CPU_FTR_COMMON                  0
-#endif
-
-/* The powersave features NAP & DOZE seems to confuse BDI when
-   debugging. So if a BDI is used, disable theses
- */
-#ifndef CONFIG_BDI_SWITCH
-#define CPU_FTR_MAYBE_CAN_DOZE  CPU_FTR_CAN_DOZE
-#define CPU_FTR_MAYBE_CAN_NAP   CPU_FTR_CAN_NAP
-#else
-#define CPU_FTR_MAYBE_CAN_DOZE  0
-#define CPU_FTR_MAYBE_CAN_NAP   0
-#endif
-
-#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
-                     !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
-                     !defined(CONFIG_BOOKE))
-
-#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \
-        CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
-#define CPU_FTRS_603    (CPU_FTR_COMMON | \
-            CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
-#define CPU_FTRS_604    (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE)
-#define CPU_FTRS_740_NOTAU      (CPU_FTR_COMMON | \
-            CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
-#define CPU_FTRS_740    (CPU_FTR_COMMON | \
-            CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-            CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
-            CPU_FTR_PPC_LE)
-#define CPU_FTRS_750    (CPU_FTR_COMMON | \
-            CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-            CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
-            CPU_FTR_PPC_LE)
-#define CPU_FTRS_750CL  (CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS)
-#define CPU_FTRS_750FX1 (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM)
-#define CPU_FTRS_750FX2 (CPU_FTRS_750 | CPU_FTR_NO_DPM)
-#define CPU_FTRS_750FX  (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \
-                CPU_FTR_HAS_HIGH_BATS)
-#define CPU_FTRS_750GX  (CPU_FTRS_750FX)
-#define CPU_FTRS_7400_NOTAU     (CPU_FTR_COMMON | \
-            CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-            CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7400   (CPU_FTR_COMMON | \
-            CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-            CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7450_20        (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7450_21        (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
-            CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7450_23        (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
-            CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
-            CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7455_20        (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
-            CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7455   (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-            CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7447_10        (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-            CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \
-            CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7447   (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-            CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7447A  (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-            CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7448   (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-            CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-            CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_82XX   (CPU_FTR_COMMON | \
-            CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
-#define CPU_FTRS_G2_LE  (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
-            CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
-#define CPU_FTRS_E300   (CPU_FTR_MAYBE_CAN_DOZE | \
-            CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
-            CPU_FTR_COMMON)
-#define CPU_FTRS_E300C2 (CPU_FTR_MAYBE_CAN_DOZE | \
-            CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
-            CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
-#define CPU_FTRS_CLASSIC32      (CPU_FTR_COMMON | \
-            CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
-#define CPU_FTRS_8XX    (CPU_FTR_USE_TB)
-#define CPU_FTRS_40X    (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_44X    (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E200   (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
-            CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
-            CPU_FTR_UNIFIED_ID_CACHE)
-#define CPU_FTRS_E500   (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-            CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-            CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
-            CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \
-            CPU_FTR_L2CSR | CPU_FTR_LWSYNC)
-#define CPU_FTRS_GENERIC_32     (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
-
-/* 64-bit CPUs */
-#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE)
-#define CPU_FTRS_RS64   (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
-            CPU_FTR_MMCRA | CPU_FTR_CTRL)
-#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-            CPU_FTR_MMCRA)
-#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-            CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
-#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-            CPU_FTR_MMCRA | CPU_FTR_SMT | \
-            CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-            CPU_FTR_PURR)
-#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-            CPU_FTR_MMCRA | CPU_FTR_SMT | \
-            CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-            CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
-            CPU_FTR_DSCR)
-#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-            CPU_FTR_MMCRA | CPU_FTR_SMT | \
-            CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-            CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
-            CPU_FTR_DSCR | CPU_FTR_SAO)
-#define CPU_FTRS_CELL   (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-            CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-            CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
-#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
-            CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
-            CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
-#define CPU_FTRS_COMPATIBLE     (CPU_FTR_USE_TB | \
-            CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2)
-
-#ifdef __powerpc64__
-#define CPU_FTRS_POSSIBLE       \
-            (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |        \
-            CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |       \
-            CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |           \
-            CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
-#else
-enum {
-        CPU_FTRS_POSSIBLE =
-#if CLASSIC_PPC
-            CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
-            CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
-            CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX |
-            CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 |
-            CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
-            CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
-            CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
-            CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
-            CPU_FTRS_CLASSIC32 |
-#else
-            CPU_FTRS_GENERIC_32 |
-#endif
-#ifdef CONFIG_8xx
-            CPU_FTRS_8XX |
-#endif
-#ifdef CONFIG_40x
-            CPU_FTRS_40X |
-#endif
-#ifdef CONFIG_44x
-            CPU_FTRS_44X |
-#endif
-#ifdef CONFIG_E200
-            CPU_FTRS_E200 |
-#endif
-#ifdef CONFIG_E500
-            CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
-#endif
-            0,
-};
-#endif /* __powerpc64__ */
-
-#ifdef __powerpc64__
-#define CPU_FTRS_ALWAYS         \
-            (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &        \
-            CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 &       \
-            CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
-#else
-enum {
-        CPU_FTRS_ALWAYS =
-#if CLASSIC_PPC
-            CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
-            CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
-            CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX &
-            CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 &
-            CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
-            CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
-            CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
-            CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
-            CPU_FTRS_CLASSIC32 &
-#else
-            CPU_FTRS_GENERIC_32 &
-#endif
-#ifdef CONFIG_8xx
-            CPU_FTRS_8XX &
-#endif
-#ifdef CONFIG_40x
-            CPU_FTRS_40X &
-#endif
-#ifdef CONFIG_44x
-            CPU_FTRS_44X &
-#endif
-#ifdef CONFIG_E200
-            CPU_FTRS_E200 &
-#endif
-#ifdef CONFIG_E500
-            CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
-#endif
-            CPU_FTRS_POSSIBLE,
-};
-#endif /* __powerpc64__ */
-
-static inline int cpu_has_feature(unsigned long feature)
-{
-        return (CPU_FTRS_ALWAYS & feature) ||
-               (CPU_FTRS_POSSIBLE
-                & cur_cpu_spec->cpu_features
-                & feature);
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_CPUTABLE_H */
diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h
deleted file mode 100644
index fb11b0c459b8..000000000000
--- a/include/asm-powerpc/cputhreads.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _ASM_POWERPC_CPUTHREADS_H
-#define _ASM_POWERPC_CPUTHREADS_H
-
-#include <linux/cpumask.h>
-
-/*
- * Mapping of threads to cores
- */
-
-#ifdef CONFIG_SMP
-extern int threads_per_core;
-extern int threads_shift;
-extern cpumask_t threads_core_mask;
-#else
-#define threads_per_core        1
-#define threads_shift           0
-#define threads_core_mask       (CPU_MASK_CPU0)
-#endif
-
-/* cpu_thread_mask_to_cores - Return a cpumask of one per cores
- *                            hit by the argument
- *
- * @threads:    a cpumask of threads
- *
- * This function returns a cpumask which will have one "cpu" (or thread)
- * bit set for each core that has at least one thread set in the argument.
- *
- * This can typically be used for things like IPI for tlb invalidations
- * since those need to be done only once per core/TLB
- */
-static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
-{
-        cpumask_t       tmp, res;
-        int             i;
-
-        res = CPU_MASK_NONE;
-        for (i = 0; i < NR_CPUS; i += threads_per_core) {
-                cpus_shift_left(tmp, threads_core_mask, i);
-                if (cpus_intersects(threads, tmp))
-                        cpu_set(i, res);
-        }
-        return res;
-}
-
-static inline int cpu_nr_cores(void)
-{
-        return NR_CPUS >> threads_shift;
-}
-
-static inline cpumask_t cpu_online_cores_map(void)
-{
-        return cpu_thread_mask_to_cores(cpu_online_map);
-}
-
-static inline int cpu_thread_to_core(int cpu)
-{
-        return cpu >> threads_shift;
-}
-
-static inline int cpu_thread_in_core(int cpu)
-{
-        return cpu & (threads_per_core - 1);
-}
-
-static inline int cpu_first_thread_in_core(int cpu)
-{
-        return cpu & ~(threads_per_core - 1);
-}
-
-#endif /* _ASM_POWERPC_CPUTHREADS_H */
-
diff --git a/include/asm-powerpc/cputime.h b/include/asm-powerpc/cputime.h
deleted file mode 100644
index f42e623030ee..000000000000
--- a/include/asm-powerpc/cputime.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Definitions for measuring cputime on powerpc machines.
- *
- * Copyright (C) 2006 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in
- * the same units as the timebase.  Otherwise we measure cpu time
- * in jiffies using the generic definitions.
- */
-
-#ifndef __POWERPC_CPUTIME_H
-#define __POWERPC_CPUTIME_H
-
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-#include <asm-generic/cputime.h>
-#else
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <asm/div64.h>
-#include <asm/time.h>
-#include <asm/param.h>
-
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
-
-#define cputime_zero                    ((cputime_t)0)
-#define cputime_max                     ((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b)           ((__a) +  (__b))
-#define cputime_sub(__a, __b)           ((__a) -  (__b))
-#define cputime_div(__a, __n)           ((__a) /  (__n))
-#define cputime_halve(__a)              ((__a) >> 1)
-#define cputime_eq(__a, __b)            ((__a) == (__b))
-#define cputime_gt(__a, __b)            ((__a) >  (__b))
-#define cputime_ge(__a, __b)            ((__a) >= (__b))
-#define cputime_lt(__a, __b)            ((__a) <  (__b))
-#define cputime_le(__a, __b)            ((__a) <= (__b))
-
-#define cputime64_zero                  ((cputime64_t)0)
-#define cputime64_add(__a, __b)         ((__a) + (__b))
-#define cputime64_sub(__a, __b)         ((__a) - (__b))
-#define cputime_to_cputime64(__ct)      (__ct)
-
-#ifdef __KERNEL__
-
-/*
- * Convert cputime <-> jiffies
- */
-extern u64 __cputime_jiffies_factor;
-DECLARE_PER_CPU(unsigned long, cputime_last_delta);
-DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta);
-
-static inline unsigned long cputime_to_jiffies(const cputime_t ct)
-{
-        return mulhdu(ct, __cputime_jiffies_factor);
-}
-
-/* Estimate the scaled cputime by scaling the real cputime based on
- * the last scaled to real ratio */
-static inline cputime_t cputime_to_scaled(const cputime_t ct)
-{
-        if (cpu_has_feature(CPU_FTR_SPURR) &&
-            per_cpu(cputime_last_delta, smp_processor_id()))
-                return ct *
-                        per_cpu(cputime_scaled_last_delta, smp_processor_id())/
-                        per_cpu(cputime_last_delta, smp_processor_id());
-        return ct;
-}
-
-static inline cputime_t jiffies_to_cputime(const unsigned long jif)
-{
-        cputime_t ct;
-        unsigned long sec;
-
-        /* have to be a little careful about overflow */
-        ct = jif % HZ;
-        sec = jif / HZ;
-        if (ct) {
-                ct *= tb_ticks_per_sec;
-                do_div(ct, HZ);
-        }
-        if (sec)
-                ct += (cputime_t) sec * tb_ticks_per_sec;
-        return ct;
-}
-
-static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
-{
-        cputime_t ct;
-        u64 sec;
-
-        /* have to be a little careful about overflow */
-        ct = jif % HZ;
-        sec = jif / HZ;
-        if (ct) {
-                ct *= tb_ticks_per_sec;
-                do_div(ct, HZ);
-        }
-        if (sec)
-                ct += (cputime_t) sec * tb_ticks_per_sec;
-        return ct;
-}
-
-static inline u64 cputime64_to_jiffies64(const cputime_t ct)
-{
-        return mulhdu(ct, __cputime_jiffies_factor);
-}
-
-/*
- * Convert cputime <-> milliseconds
- */
-extern u64 __cputime_msec_factor;
-
-static inline unsigned long cputime_to_msecs(const cputime_t ct)
-{
-        return mulhdu(ct, __cputime_msec_factor);
-}
-
-static inline cputime_t msecs_to_cputime(const unsigned long ms)
-{
-        cputime_t ct;
-        unsigned long sec;
-
-        /* have to be a little careful about overflow */
-        ct = ms % 1000;
-        sec = ms / 1000;
-        if (ct) {
-                ct *= tb_ticks_per_sec;
-                do_div(ct, 1000);
-        }
-        if (sec)
-                ct += (cputime_t) sec * tb_ticks_per_sec;
-        return ct;
-}
-
-/*
- * Convert cputime <-> seconds
- */
-extern u64 __cputime_sec_factor;
-
-static inline unsigned long cputime_to_secs(const cputime_t ct)
-{
-        return mulhdu(ct, __cputime_sec_factor);
-}
-
-static inline cputime_t secs_to_cputime(const unsigned long sec)
-{
-        return (cputime_t) sec * tb_ticks_per_sec;
-}
-
-/*
- * Convert cputime <-> timespec
- */
-static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
-{
-        u64 x = ct;
-        unsigned int frac;
-
-        frac = do_div(x, tb_ticks_per_sec);
-        p->tv_sec = x;
-        x = (u64) frac * 1000000000;
-        do_div(x, tb_ticks_per_sec);
-        p->tv_nsec = x;
-}
-
-static inline cputime_t timespec_to_cputime(const struct timespec *p)
-{
-        cputime_t ct;
-
-        ct = (u64) p->tv_nsec * tb_ticks_per_sec;
-        do_div(ct, 1000000000);
-        return ct + (u64) p->tv_sec * tb_ticks_per_sec;
-}
-
-/*
- * Convert cputime <-> timeval
- */
-static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
-{
-        u64 x = ct;
-        unsigned int frac;
-
-        frac = do_div(x, tb_ticks_per_sec);
-        p->tv_sec = x;
-        x = (u64) frac * 1000000;
-        do_div(x, tb_ticks_per_sec);
-        p->tv_usec = x;
-}
-
-static inline cputime_t timeval_to_cputime(const struct timeval *p)
-{
-        cputime_t ct;
-
-        ct = (u64) p->tv_usec * tb_ticks_per_sec;
-        do_div(ct, 1000000);
-        return ct + (u64) p->tv_sec * tb_ticks_per_sec;
-}
-
-/*
- * Convert cputime <-> clock_t (units of 1/USER_HZ seconds)
- */
-extern u64 __cputime_clockt_factor;
-
-static inline unsigned long cputime_to_clock_t(const cputime_t ct)
-{
-        return mulhdu(ct, __cputime_clockt_factor);
-}
-
-static inline cputime_t clock_t_to_cputime(const unsigned long clk)
-{
-        cputime_t ct;
-        unsigned long sec;
-
-        /* have to be a little careful about overflow */
-        ct = clk % USER_HZ;
-        sec = clk / USER_HZ;
-        if (ct) {
-                ct *= tb_ticks_per_sec;
-                do_div(ct, USER_HZ);
-        }
-        if (sec)
-                ct += (cputime_t) sec * tb_ticks_per_sec;
-        return ct;
-}
-
-#define cputime64_to_clock_t(ct)        cputime_to_clock_t((cputime_t)(ct))
-
-#endif /* __KERNEL__ */
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
-#endif /* __POWERPC_CPUTIME_H */
diff --git a/include/asm-powerpc/current.h b/include/asm-powerpc/current.h
deleted file mode 100644
index e2c7f06931e7..000000000000
--- a/include/asm-powerpc/current.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _ASM_POWERPC_CURRENT_H
-#define _ASM_POWERPC_CURRENT_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-struct task_struct;
-
-#ifdef __powerpc64__
-#include <linux/stddef.h>
-#include <asm/paca.h>
-
-static inline struct task_struct *get_current(void)
-{
-        struct task_struct *task;
-
-        __asm__ __volatile__("ld %0,%1(13)"
-        : "=r" (task)
-        : "i" (offsetof(struct paca_struct, __current)));
-
-        return task;
-}
-#define current get_current()
-
-#else
-
-/*
- * We keep `current' in r2 for speed.
- */
-register struct task_struct *current asm ("r2");
-
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_CURRENT_H */
diff --git a/include/asm-powerpc/dbdma.h b/include/asm-powerpc/dbdma.h
deleted file mode 100644
index e23f07e73cb3..000000000000
--- a/include/asm-powerpc/dbdma.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Definitions for using the Apple Descriptor-Based DMA controller
- * in Power Macintosh computers.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-
-#ifdef __KERNEL__
-#ifndef _ASM_DBDMA_H_
-#define _ASM_DBDMA_H_
-/*
- * DBDMA control/status registers.  All little-endian.
- */
-struct dbdma_regs {
-    unsigned int control;       /* lets you change bits in status */
-    unsigned int status;        /* DMA and device status bits (see below) */
-    unsigned int cmdptr_hi;     /* upper 32 bits of command address */
-    unsigned int cmdptr;        /* (lower 32 bits of) command address (phys) */
-    unsigned int intr_sel;      /* select interrupt condition bit */
-    unsigned int br_sel;        /* select branch condition bit */
-    unsigned int wait_sel;      /* select wait condition bit */
-    unsigned int xfer_mode;
-    unsigned int data2ptr_hi;
-    unsigned int data2ptr;
-    unsigned int res1;
-    unsigned int address_hi;
-    unsigned int br_addr_hi;
-    unsigned int res2[3];
-};
-
-/* Bits in control and status registers */
-#define RUN     0x8000
-#define PAUSE   0x4000
-#define FLUSH   0x2000
-#define WAKE    0x1000
-#define DEAD    0x0800
-#define ACTIVE  0x0400
-#define BT      0x0100
-#define DEVSTAT 0x00ff
-
-/*
- * DBDMA command structure.  These fields are all little-endian!
- */
-struct dbdma_cmd {
-    unsigned short req_count;   /* requested byte transfer count */
-    unsigned short command;     /* command word (has bit-fields) */
-    unsigned int   phy_addr;    /* physical data address */
-    unsigned int   cmd_dep;     /* command-dependent field */
-    unsigned short res_count;   /* residual count after completion */
-    unsigned short xfer_status; /* transfer status */
-};
-
-/* DBDMA command values in command field */
-#define OUTPUT_MORE     0       /* transfer memory data to stream */
-#define OUTPUT_LAST     0x1000  /* ditto followed by end marker */
-#define INPUT_MORE      0x2000  /* transfer stream data to memory */
-#define INPUT_LAST      0x3000  /* ditto, expect end marker */
-#define STORE_WORD      0x4000  /* write word (4 bytes) to device reg */
-#define LOAD_WORD       0x5000  /* read word (4 bytes) from device reg */
-#define DBDMA_NOP       0x6000  /* do nothing */
-#define DBDMA_STOP      0x7000  /* suspend processing */
-
-/* Key values in command field */
-#define KEY_STREAM0     0       /* usual data stream */
-#define KEY_STREAM1     0x100   /* control/status stream */
-#define KEY_STREAM2     0x200   /* device-dependent stream */
-#define KEY_STREAM3     0x300   /* device-dependent stream */
-#define KEY_REGS        0x500   /* device register space */
-#define KEY_SYSTEM      0x600   /* system memory-mapped space */
-#define KEY_DEVICE      0x700   /* device memory-mapped space */
-
-/* Interrupt control values in command field */
-#define INTR_NEVER      0       /* don't interrupt */
-#define INTR_IFSET      0x10    /* intr if condition bit is 1 */
-#define INTR_IFCLR      0x20    /* intr if condition bit is 0 */
-#define INTR_ALWAYS     0x30    /* always interrupt */
-
-/* Branch control values in command field */
-#define BR_NEVER        0       /* don't branch */
-#define BR_IFSET        0x4     /* branch if condition bit is 1 */
-#define BR_IFCLR        0x8     /* branch if condition bit is 0 */
-#define BR_ALWAYS       0xc     /* always branch */
-
-/* Wait control values in command field */
-#define WAIT_NEVER      0       /* don't wait */
-#define WAIT_IFSET      1       /* wait if condition bit is 1 */
-#define WAIT_IFCLR      2       /* wait if condition bit is 0 */
-#define WAIT_ALWAYS     3       /* always wait */
-
-/* Align an address for a DBDMA command structure */
-#define DBDMA_ALIGN(x)  (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \
-                         & -sizeof(struct dbdma_cmd))
-
-/* Useful macros */
-#define DBDMA_DO_STOP(regs) do {                                \
-        out_le32(&((regs)->control), (RUN|FLUSH)<<16);          \
-        while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH))      \
-                ; \
-} while(0)
-
-#define DBDMA_DO_RESET(regs) do {                               \
-        out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\
-        while(in_le32(&((regs)->status)) & (RUN)) \
-                ; \
-} while(0)
-
-#endif /* _ASM_DBDMA_H_ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/dcr-generic.h b/include/asm-powerpc/dcr-generic.h
deleted file mode 100644
index 35b71599ec46..000000000000
--- a/include/asm-powerpc/dcr-generic.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_GENERIC_H
-#define _ASM_POWERPC_DCR_GENERIC_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID};
-
-typedef struct {
-        enum host_type_t type;
-        union {
-                dcr_host_mmio_t mmio;
-                dcr_host_native_t native;
-        } host;
-} dcr_host_t;
-
-extern bool dcr_map_ok_generic(dcr_host_t host);
-
-extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n,
-                          unsigned int dcr_c);
-extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c);
-
-extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n);
-
-extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_GENERIC_H */
-
-
diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h
deleted file mode 100644
index acd491dbd45a..000000000000
--- a/include/asm-powerpc/dcr-mmio.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_MMIO_H
-#define _ASM_POWERPC_DCR_MMIO_H
-#ifdef __KERNEL__
-
-#include <asm/io.h>
-
-typedef struct {
-        void __iomem *token;
-        unsigned int stride;
-        unsigned int base;
-} dcr_host_mmio_t;
-
-static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host)
-{
-        return host.token != NULL;
-}
-
-extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
-                                    unsigned int dcr_n,
-                                    unsigned int dcr_c);
-extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c);
-
-static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n)
-{
-        return in_be32(host.token + ((host.base + dcr_n) * host.stride));
-}
-
-static inline void dcr_write_mmio(dcr_host_mmio_t host,
-                                  unsigned int dcr_n,
-                                  u32 value)
-{
-        out_be32(host.token + ((host.base + dcr_n) * host.stride), value);
-}
-
-extern u64 of_translate_dcr_address(struct device_node *dev,
-                                    unsigned int dcr_n,
-                                    unsigned int *stride);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_MMIO_H */
-
-
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
deleted file mode 100644
index 72d2b72c7390..000000000000
--- a/include/asm-powerpc/dcr-native.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_NATIVE_H
-#define _ASM_POWERPC_DCR_NATIVE_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <linux/spinlock.h>
-
-typedef struct {
-        unsigned int base;
-} dcr_host_native_t;
-
-static inline bool dcr_map_ok_native(dcr_host_native_t host)
-{
-        return 1;
-}
-
-#define dcr_map_native(dev, dcr_n, dcr_c) \
-        ((dcr_host_native_t){ .base = (dcr_n) })
-#define dcr_unmap_native(host, dcr_c)           do {} while (0)
-#define dcr_read_native(host, dcr_n)            mfdcr(dcr_n + host.base)
-#define dcr_write_native(host, dcr_n, value)    mtdcr(dcr_n + host.base, value)
-
-/* Device Control Registers */
-void __mtdcr(int reg, unsigned int val);
-unsigned int __mfdcr(int reg);
-#define mfdcr(rn)                                               \
-        ({unsigned int rval;                                    \
-        if (__builtin_constant_p(rn))                           \
-                asm volatile("mfdcr %0," __stringify(rn)        \
-                              : "=r" (rval));                   \
-        else                                                    \
-                rval = __mfdcr(rn);                             \
-        rval;})
-
-#define mtdcr(rn, v)                                            \
-do {                                                            \
-        if (__builtin_constant_p(rn))                           \
-                asm volatile("mtdcr " __stringify(rn) ",%0"     \
-                              : : "r" (v));                     \
-        else                                                    \
-                __mtdcr(rn, v);                                 \
-} while (0)
-
-/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
-extern spinlock_t dcr_ind_lock;
-
-static inline unsigned __mfdcri(int base_addr, int base_data, int reg)
-{
-        unsigned long flags;
-        unsigned int val;
-
-        spin_lock_irqsave(&dcr_ind_lock, flags);
-        __mtdcr(base_addr, reg);
-        val = __mfdcr(base_data);
-        spin_unlock_irqrestore(&dcr_ind_lock, flags);
-        return val;
-}
-
-static inline void __mtdcri(int base_addr, int base_data, int reg,
-                            unsigned val)
-{
-        unsigned long flags;
-
-        spin_lock_irqsave(&dcr_ind_lock, flags);
-        __mtdcr(base_addr, reg);
-        __mtdcr(base_data, val);
-        spin_unlock_irqrestore(&dcr_ind_lock, flags);
-}
-
-static inline void __dcri_clrset(int base_addr, int base_data, int reg,
-                                 unsigned clr, unsigned set)
-{
-        unsigned long flags;
-        unsigned int val;
-
-        spin_lock_irqsave(&dcr_ind_lock, flags);
-        __mtdcr(base_addr, reg);
-        val = (__mfdcr(base_data) & ~clr) | set;
-        __mtdcr(base_data, val);
-        spin_unlock_irqrestore(&dcr_ind_lock, flags);
-}
-
-#define mfdcri(base, reg)       __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \
-                                         DCRN_ ## base ## _CONFIG_DATA, \
-                                         reg)
-
-#define mtdcri(base, reg, data) __mtdcri(DCRN_ ## base ## _CONFIG_ADDR, \
-                                         DCRN_ ## base ## _CONFIG_DATA, \
-                                         reg, data)
-
-#define dcri_clrset(base, reg, clr, set)        __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR,    \
-                                                              DCRN_ ## base ## _CONFIG_DATA,    \
-                                                              reg, clr, set)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h
deleted file mode 100644
index 29b0ecef980a..000000000000
--- a/include/asm-powerpc/dcr-regs.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Common DCR / SDR / CPR register definitions used on various IBM/AMCC
- * 4xx processors
- *
- *    Copyright 2007 Benjamin Herrenschmidt, IBM Corp
- *                   <benh@kernel.crashing.org>
- *
- * Mostly lifted from asm-ppc/ibm4xx.h by
- *
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- */
-
-#ifndef __DCR_REGS_H__
-#define __DCR_REGS_H__
-
-/*
- * Most DCRs used for controlling devices such as the MAL, DMA engine,
- * etc... are obtained for the device tree.
- *
- * The definitions in this files are fixed DCRs and indirect DCRs that
- * are commonly used outside of specific drivers or refer to core
- * common registers that may occasionally have to be tweaked outside
- * of the driver main register set
- */
-
-/* CPRs (440GX and 440SP/440SPe) */
-#define DCRN_CPR0_CONFIG_ADDR   0xc
-#define DCRN_CPR0_CONFIG_DATA   0xd
-
-/* SDRs (440GX and 440SP/440SPe) */
-#define DCRN_SDR0_CONFIG_ADDR   0xe
-#define DCRN_SDR0_CONFIG_DATA   0xf
-
-#define SDR0_PFC0               0x4100
-#define SDR0_PFC1               0x4101
-#define SDR0_PFC1_EPS           0x1c00000
-#define SDR0_PFC1_EPS_SHIFT     22
-#define SDR0_PFC1_RMII          0x02000000
-#define SDR0_MFR                0x4300
-#define SDR0_MFR_TAH0           0x80000000      /* TAHOE0 Enable */
-#define SDR0_MFR_TAH1           0x40000000      /* TAHOE1 Enable */
-#define SDR0_MFR_PCM            0x10000000      /* PPC440GP irq compat mode */
-#define SDR0_MFR_ECS            0x08000000      /* EMAC int clk */
-#define SDR0_MFR_T0TXFL         0x00080000
-#define SDR0_MFR_T0TXFH         0x00040000
-#define SDR0_MFR_T1TXFL         0x00020000
-#define SDR0_MFR_T1TXFH         0x00010000
-#define SDR0_MFR_E0TXFL         0x00008000
-#define SDR0_MFR_E0TXFH         0x00004000
-#define SDR0_MFR_E0RXFL         0x00002000
-#define SDR0_MFR_E0RXFH         0x00001000
-#define SDR0_MFR_E1TXFL         0x00000800
-#define SDR0_MFR_E1TXFH         0x00000400
-#define SDR0_MFR_E1RXFL         0x00000200
-#define SDR0_MFR_E1RXFH         0x00000100
-#define SDR0_MFR_E2TXFL         0x00000080
-#define SDR0_MFR_E2TXFH         0x00000040
-#define SDR0_MFR_E2RXFL         0x00000020
-#define SDR0_MFR_E2RXFH         0x00000010
-#define SDR0_MFR_E3TXFL         0x00000008
-#define SDR0_MFR_E3TXFH         0x00000004
-#define SDR0_MFR_E3RXFL         0x00000002
-#define SDR0_MFR_E3RXFH         0x00000001
-#define SDR0_UART0              0x0120
-#define SDR0_UART1              0x0121
-#define SDR0_UART2              0x0122
-#define SDR0_UART3              0x0123
-#define SDR0_CUST0              0x4000
-
-/*
- * All those DCR register addresses are offsets from the base address
- * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
- * excluded here and configured in the device tree.
- */
-#define DCRN_SRAM0_SB0CR        0x00
-#define DCRN_SRAM0_SB1CR        0x01
-#define DCRN_SRAM0_SB2CR        0x02
-#define DCRN_SRAM0_SB3CR        0x03
-#define  SRAM_SBCR_BU_MASK      0x00000180
-#define  SRAM_SBCR_BS_64KB      0x00000800
-#define  SRAM_SBCR_BU_RO        0x00000080
-#define  SRAM_SBCR_BU_RW        0x00000180
-#define DCRN_SRAM0_BEAR         0x04
-#define DCRN_SRAM0_BESR0        0x05
-#define DCRN_SRAM0_BESR1        0x06
-#define DCRN_SRAM0_PMEG         0x07
-#define DCRN_SRAM0_CID          0x08
-#define DCRN_SRAM0_REVID        0x09
-#define DCRN_SRAM0_DPC          0x0a
-#define  SRAM_DPC_ENABLE        0x80000000
-
-/*
- * All those DCR register addresses are offsets from the base address
- * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
- * excluded here and configured in the device tree.
- */
-#define DCRN_L2C0_CFG           0x00
-#define  L2C_CFG_L2M            0x80000000
-#define  L2C_CFG_ICU            0x40000000
-#define  L2C_CFG_DCU            0x20000000
-#define  L2C_CFG_DCW_MASK       0x1e000000
-#define  L2C_CFG_TPC            0x01000000
-#define  L2C_CFG_CPC            0x00800000
-#define  L2C_CFG_FRAN           0x00200000
-#define  L2C_CFG_SS_MASK        0x00180000
-#define  L2C_CFG_SS_256         0x00000000
-#define  L2C_CFG_CPIM           0x00040000
-#define  L2C_CFG_TPIM           0x00020000
-#define  L2C_CFG_LIM            0x00010000
-#define  L2C_CFG_PMUX_MASK      0x00007000
-#define  L2C_CFG_PMUX_SNP       0x00000000
-#define  L2C_CFG_PMUX_IF        0x00001000
-#define  L2C_CFG_PMUX_DF        0x00002000
-#define  L2C_CFG_PMUX_DS        0x00003000
-#define  L2C_CFG_PMIM           0x00000800
-#define  L2C_CFG_TPEI           0x00000400
-#define  L2C_CFG_CPEI           0x00000200
-#define  L2C_CFG_NAM            0x00000100
-#define  L2C_CFG_SMCM           0x00000080
-#define  L2C_CFG_NBRM           0x00000040
-#define  L2C_CFG_RDBW           0x00000008      /* only 460EX/GT */
-#define DCRN_L2C0_CMD           0x01
-#define  L2C_CMD_CLR            0x80000000
-#define  L2C_CMD_DIAG           0x40000000
-#define  L2C_CMD_INV            0x20000000
-#define  L2C_CMD_CCP            0x10000000
-#define  L2C_CMD_CTE            0x08000000
-#define  L2C_CMD_STRC           0x04000000
-#define  L2C_CMD_STPC           0x02000000
-#define  L2C_CMD_RPMC           0x01000000
-#define  L2C_CMD_HCC            0x00800000
-#define DCRN_L2C0_ADDR          0x02
-#define DCRN_L2C0_DATA          0x03
-#define DCRN_L2C0_SR            0x04
-#define  L2C_SR_CC              0x80000000
-#define  L2C_SR_CPE             0x40000000
-#define  L2C_SR_TPE             0x20000000
-#define  L2C_SR_LRU             0x10000000
-#define  L2C_SR_PCS             0x08000000
-#define DCRN_L2C0_REVID         0x05
-#define DCRN_L2C0_SNP0          0x06
-#define DCRN_L2C0_SNP1          0x07
-#define  L2C_SNP_BA_MASK        0xffff0000
-#define  L2C_SNP_SSR_MASK       0x0000f000
-#define  L2C_SNP_SSR_32G        0x0000f000
-#define  L2C_SNP_ESR            0x00000800
-
-#endif /* __DCR_REGS_H__ */
diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h
deleted file mode 100644
index 53b283050ab3..000000000000
--- a/include/asm-powerpc/dcr.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_H
-#define _ASM_POWERPC_DCR_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_PPC_DCR
-
-#ifdef CONFIG_PPC_DCR_NATIVE
-#include <asm/dcr-native.h>
-#endif
-
-#ifdef CONFIG_PPC_DCR_MMIO
-#include <asm/dcr-mmio.h>
-#endif
-
-
-/* Indirection layer for providing both NATIVE and MMIO support. */
-
-#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
-
-#include <asm/dcr-generic.h>
-
-#define DCR_MAP_OK(host)        dcr_map_ok_generic(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
-
-#else
-
-#ifdef CONFIG_PPC_DCR_NATIVE
-typedef dcr_host_native_t dcr_host_t;
-#define DCR_MAP_OK(host)        dcr_map_ok_native(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
-#else
-typedef dcr_host_mmio_t dcr_host_t;
-#define DCR_MAP_OK(host)        dcr_map_ok_mmio(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
-#endif
-
-#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
-
-/*
- * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
- * base from the device-tree
- */
-#ifdef CONFIG_PPC_MERGE
-struct device_node;
-extern unsigned int dcr_resource_start(struct device_node *np,
-                                       unsigned int index);
-extern unsigned int dcr_resource_len(struct device_node *np,
-                                     unsigned int index);
-#endif /* CONFIG_PPC_MERGE */
-
-#endif /* CONFIG_PPC_DCR */
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_H */
diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h
deleted file mode 100644
index f9200a65c632..000000000000
--- a/include/asm-powerpc/delay.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _ASM_POWERPC_DELAY_H
-#define _ASM_POWERPC_DELAY_H
-#ifdef __KERNEL__
-
-/*
- * Copyright 1996, Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan,
- * Anton Blanchard.
- */
-
-extern void __delay(unsigned long loops);
-extern void udelay(unsigned long usecs);
-
-/*
- * On shared processor machines the generic implementation of mdelay can
- * result in large errors. While each iteration of the loop inside mdelay
- * is supposed to take 1ms, the hypervisor could sleep our partition for
- * longer (eg 10ms). With the right timing these errors can add up.
- *
- * Since there is no 32bit overflow issue on 64bit kernels, just call
- * udelay directly.
- */
-#ifdef CONFIG_PPC64
-#define mdelay(n)       udelay((n) * 1000)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DELAY_H */
diff --git a/include/asm-powerpc/device.h b/include/asm-powerpc/device.h
deleted file mode 100644
index 228ab2a315b9..000000000000
--- a/include/asm-powerpc/device.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#ifndef _ASM_POWERPC_DEVICE_H
-#define _ASM_POWERPC_DEVICE_H
-
-struct dma_mapping_ops;
-struct device_node;
-
-struct dev_archdata {
-        /* Optional pointer to an OF device node */
-        struct device_node      *of_node;
-
-        /* DMA operations on that device */
-        struct dma_mapping_ops  *dma_ops;
-        void                    *dma_data;
-
-        /* NUMA node if applicable */
-        int                     numa_node;
-};
-
-#endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/include/asm-powerpc/div64.h b/include/asm-powerpc/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-powerpc/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
deleted file mode 100644
index c7ca45f97dd2..000000000000
--- a/include/asm-powerpc/dma-mapping.h
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * Copyright (C) 2004 IBM
- *
- * Implements the generic device dma API for powerpc.
- * the pci and vio busses
- */
-#ifndef _ASM_DMA_MAPPING_H
-#define _ASM_DMA_MAPPING_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/cache.h>
-/* need struct page definitions */
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-attrs.h>
-#include <asm/io.h>
-
-#define DMA_ERROR_CODE          (~(dma_addr_t)0x0)
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * DMA-consistent mapping functions for PowerPCs that don't support
- * cache snooping.  These allocate/free a region of uncached mapped
- * memory space for use with DMA devices.  Alternatively, you could
- * allocate the space "normally" and use the cache management functions
- * to ensure it is consistent.
- */
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
-extern void __dma_free_coherent(size_t size, void *vaddr);
-extern void __dma_sync(void *vaddr, size_t size, int direction);
-extern void __dma_sync_page(struct page *page, unsigned long offset,
-                                 size_t size, int direction);
-
-#else /* ! CONFIG_NOT_COHERENT_CACHE */
-/*
- * Cache coherent cores.
- */
-
-#define __dma_alloc_coherent(gfp, size, handle) NULL
-#define __dma_free_coherent(size, addr)         ((void)0)
-#define __dma_sync(addr, size, rw)              ((void)0)
-#define __dma_sync_page(pg, off, sz, rw)        ((void)0)
-
-#endif /* ! CONFIG_NOT_COHERENT_CACHE */
-
-#ifdef CONFIG_PPC64
-
-static inline unsigned long device_to_mask(struct device *dev)
-{
-        if (dev->dma_mask && *dev->dma_mask)
-                return *dev->dma_mask;
-        /* Assume devices without mask can take 32 bit addresses */
-        return 0xfffffffful;
-}
-
-/*
- * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
- */
-struct dma_mapping_ops {
-        void *          (*alloc_coherent)(struct device *dev, size_t size,
-                                dma_addr_t *dma_handle, gfp_t flag);
-        void            (*free_coherent)(struct device *dev, size_t size,
-                                void *vaddr, dma_addr_t dma_handle);
-        dma_addr_t      (*map_single)(struct device *dev, void *ptr,
-                                size_t size, enum dma_data_direction direction,
-                                struct dma_attrs *attrs);
-        void            (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
-                                size_t size, enum dma_data_direction direction,
-                                struct dma_attrs *attrs);
-        int             (*map_sg)(struct device *dev, struct scatterlist *sg,
-                                int nents, enum dma_data_direction direction,
-                                struct dma_attrs *attrs);
-        void            (*unmap_sg)(struct device *dev, struct scatterlist *sg,
-                                int nents, enum dma_data_direction direction,
-                                struct dma_attrs *attrs);
-        int             (*dma_supported)(struct device *dev, u64 mask);
-        int             (*set_dma_mask)(struct device *dev, u64 dma_mask);
-};
-
-static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
-{
-        /* We don't handle the NULL dev case for ISA for now. We could
-         * do it via an out of line call but it is not needed for now. The
-         * only ISA DMA device we support is the floppy and we have a hack
-         * in the floppy driver directly to get a device for us.
-         */
-        if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
-                return NULL;
-        return dev->archdata.dma_ops;
-}
-
-static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
-{
-        dev->archdata.dma_ops = ops;
-}
-
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        if (unlikely(dma_ops == NULL))
-                return 0;
-        if (dma_ops->dma_supported == NULL)
-                return 1;
-        return dma_ops->dma_supported(dev, mask);
-}
-
-/* We have our own implementation of pci_set_dma_mask() */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        if (unlikely(dma_ops == NULL))
-                return -EIO;
-        if (dma_ops->set_dma_mask != NULL)
-                return dma_ops->set_dma_mask(dev, dma_mask);
-        if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-                return -EIO;
-        *dev->dma_mask = dma_mask;
-        return 0;
-}
-
-static inline dma_addr_t dma_map_single_attrs(struct device *dev,
-                                              void *cpu_addr,
-                                              size_t size,
-                                              enum dma_data_direction direction,
-                                              struct dma_attrs *attrs)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        BUG_ON(!dma_ops);
-        return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
-}
-
-static inline void dma_unmap_single_attrs(struct device *dev,
-                                          dma_addr_t dma_addr,
-                                          size_t size,
-                                          enum dma_data_direction direction,
-                                          struct dma_attrs *attrs)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        BUG_ON(!dma_ops);
-        dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
-}
-
-static inline dma_addr_t dma_map_page_attrs(struct device *dev,
-                                            struct page *page,
-                                            unsigned long offset, size_t size,
-                                            enum dma_data_direction direction,
-                                            struct dma_attrs *attrs)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        BUG_ON(!dma_ops);
-        return dma_ops->map_single(dev, page_address(page) + offset, size,
-                        direction, attrs);
-}
-
-static inline void dma_unmap_page_attrs(struct device *dev,
-                                        dma_addr_t dma_address,
-                                        size_t size,
-                                        enum dma_data_direction direction,
-                                        struct dma_attrs *attrs)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        BUG_ON(!dma_ops);
-        dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
-}
-
-static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
-                                   int nents, enum dma_data_direction direction,
-                                   struct dma_attrs *attrs)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        BUG_ON(!dma_ops);
-        return dma_ops->map_sg(dev, sg, nents, direction, attrs);
-}
-
-static inline void dma_unmap_sg_attrs(struct device *dev,
-                                      struct scatterlist *sg,
-                                      int nhwentries,
-                                      enum dma_data_direction direction,
-                                      struct dma_attrs *attrs)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        BUG_ON(!dma_ops);
-        dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-                                       dma_addr_t *dma_handle, gfp_t flag)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        BUG_ON(!dma_ops);
-        return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-                                     void *cpu_addr, dma_addr_t dma_handle)
-{
-        struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-        BUG_ON(!dma_ops);
-        dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-                                        size_t size,
-                                        enum dma_data_direction direction)
-{
-        return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-                                    size_t size,
-                                    enum dma_data_direction direction)
-{
-        dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-                                      unsigned long offset, size_t size,
-                                      enum dma_data_direction direction)
-{
-        return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-                                  size_t size,
-                                  enum dma_data_direction direction)
-{
-        dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-                             int nents, enum dma_data_direction direction)
-{
-        return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-                                int nhwentries,
-                                enum dma_data_direction direction)
-{
-        dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
-}
-
-/*
- * Available generic sets of operations
- */
-extern struct dma_mapping_ops dma_iommu_ops;
-extern struct dma_mapping_ops dma_direct_ops;
-
-#else /* CONFIG_PPC64 */
-
-#define dma_supported(dev, mask)        (1)
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-        if (!dev->dma_mask || !dma_supported(dev, mask))
-                return -EIO;
-
-        *dev->dma_mask = dma_mask;
-
-        return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-                                       dma_addr_t * dma_handle,
-                                       gfp_t gfp)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
-        return __dma_alloc_coherent(size, dma_handle, gfp);
-#else
-        void *ret;
-        /* ignore region specifiers */
-        gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-
-        if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
-                gfp |= GFP_DMA;
-
-        ret = (void *)__get_free_pages(gfp, get_order(size));
-
-        if (ret != NULL) {
-                memset(ret, 0, size);
-                *dma_handle = virt_to_bus(ret);
-        }
-
-        return ret;
-#endif
-}
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-                  dma_addr_t dma_handle)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
-        __dma_free_coherent(size, vaddr);
-#else
-        free_pages((unsigned long)vaddr, get_order(size));
-#endif
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-               enum dma_data_direction direction)
-{
-        BUG_ON(direction == DMA_NONE);
-
-        __dma_sync(ptr, size, direction);
-
-        return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-                                    size_t size,
-                                    enum dma_data_direction direction)
-{
-        /* We do nothing. */
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-             unsigned long offset, size_t size,
-             enum dma_data_direction direction)
-{
-        BUG_ON(direction == DMA_NONE);
-
-        __dma_sync_page(page, offset, size, direction);
-
-        return page_to_bus(page) + offset;
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-                                  size_t size,
-                                  enum dma_data_direction direction)
-{
-        /* We do nothing. */
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-           enum dma_data_direction direction)
-{
-        struct scatterlist *sg;
-        int i;
-
-        BUG_ON(direction == DMA_NONE);
-
-        for_each_sg(sgl, sg, nents, i) {
-                BUG_ON(!sg_page(sg));
-                __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-                sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
-        }
-
-        return nents;
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-                                int nhwentries,
-                                enum dma_data_direction direction)
-{
-        /* We don't do anything here. */
-}
-
-#endif /* CONFIG_PPC64 */
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-                dma_addr_t dma_handle, size_t size,
-                enum dma_data_direction direction)
-{
-        BUG_ON(direction == DMA_NONE);
-        __dma_sync(bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-                dma_addr_t dma_handle, size_t size,
-                enum dma_data_direction direction)
-{
-        BUG_ON(direction == DMA_NONE);
-        __dma_sync(bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-                struct scatterlist *sgl, int nents,
-                enum dma_data_direction direction)
-{
-        struct scatterlist *sg;
-        int i;
-
-        BUG_ON(direction == DMA_NONE);
-
-        for_each_sg(sgl, sg, nents, i)
-                __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-                struct scatterlist *sgl, int nents,
-                enum dma_data_direction direction)
-{
-        struct scatterlist *sg;
-        int i;
-
-        BUG_ON(direction == DMA_NONE);
-
-        for_each_sg(sgl, sg, nents, i)
-                __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-#ifdef CONFIG_PPC64
-        return (dma_addr == DMA_ERROR_CODE);
-#else
-        return 0;
-#endif
-}
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define dma_is_consistent(d, h) (0)
-#else
-#define dma_is_consistent(d, h) (1)
-#endif
-
-static inline int dma_get_cache_alignment(void)
-{
-#ifdef CONFIG_PPC64
-        /* no easy way to get cache size on all processors, so return
-         * the maximum possible, to be safe */
-        return (1 << INTERNODE_CACHE_SHIFT);
-#else
-        /*
-         * Each processor family will define its own L1_CACHE_SHIFT,
-         * L1_CACHE_BYTES wraps to this, so this is always safe.
-         */
-        return L1_CACHE_BYTES;
-#endif
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-                dma_addr_t dma_handle, unsigned long offset, size_t size,
-                enum dma_data_direction direction)
-{
-        /* just sync everything for now */
-        dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-                dma_addr_t dma_handle, unsigned long offset, size_t size,
-                enum dma_data_direction direction)
-{
-        /* just sync everything for now */
-        dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-                enum dma_data_direction direction)
-{
-        BUG_ON(direction == DMA_NONE);
-        __dma_sync(vaddr, size, (int)direction);
-}
-
-#endif /* __KERNEL__ */
-#endif  /* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-powerpc/dma.h b/include/asm-powerpc/dma.h
deleted file mode 100644
index a7e06e25c708..000000000000
--- a/include/asm-powerpc/dma.h
+++ /dev/null
@@ -1,360 +0,0 @@
-#ifndef _ASM_POWERPC_DMA_H
-#define _ASM_POWERPC_DMA_H
-#ifdef __KERNEL__
-
-/*
- * Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- * Changes for ppc sound by Christoph Nadig
- */
-
-/*
- * Note: Adapted for PowerPC by Gary Thomas
- * Modified by Cort Dougan <cort@cs.nmt.edu>
- *
- * None of this really applies for Power Macintoshes.  There is
- * basically just enough here to get kernel/dma.c to compile.
- *
- * There may be some comments or restrictions made here which are
- * not valid for the PReP platform.  Take what you read
- * with a grain of salt.
- */
-
-#include <asm/io.h>
-#include <linux/spinlock.h>
-#include <asm/system.h>
-
-#ifndef MAX_DMA_CHANNELS
-#define MAX_DMA_CHANNELS        8
-#endif
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-/* Doesn't really apply... */
-#define MAX_DMA_ADDRESS         (~0UL)
-
-#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI)
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb        outb_p
-#else
-#define dma_outb        outb
-#endif
-
-#define dma_inb         inb
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
- * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE    0x00    /* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE    0xC0    /* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG            0x08    /* command register (w) */
-#define DMA1_STAT_REG           0x08    /* status register (r) */
-#define DMA1_REQ_REG            0x09    /* request register (w) */
-#define DMA1_MASK_REG           0x0A    /* single-channel mask (w) */
-#define DMA1_MODE_REG           0x0B    /* mode register (w) */
-#define DMA1_CLEAR_FF_REG       0x0C    /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
-#define DMA1_RESET_REG          0x0D    /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
-#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
-
-#define DMA2_CMD_REG            0xD0    /* command register (w) */
-#define DMA2_STAT_REG           0xD0    /* status register (r) */
-#define DMA2_REQ_REG            0xD2    /* request register (w) */
-#define DMA2_MASK_REG           0xD4    /* single-channel mask (w) */
-#define DMA2_MODE_REG           0xD6    /* mode register (w) */
-#define DMA2_CLEAR_FF_REG       0xD8    /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
-#define DMA2_RESET_REG          0xDA    /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
-#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
-
-#define DMA_ADDR_0              0x00    /* DMA address registers */
-#define DMA_ADDR_1              0x02
-#define DMA_ADDR_2              0x04
-#define DMA_ADDR_3              0x06
-#define DMA_ADDR_4              0xC0
-#define DMA_ADDR_5              0xC4
-#define DMA_ADDR_6              0xC8
-#define DMA_ADDR_7              0xCC
-
-#define DMA_CNT_0               0x01    /* DMA count registers */
-#define DMA_CNT_1               0x03
-#define DMA_CNT_2               0x05
-#define DMA_CNT_3               0x07
-#define DMA_CNT_4               0xC2
-#define DMA_CNT_5               0xC6
-#define DMA_CNT_6               0xCA
-#define DMA_CNT_7               0xCE
-
-#define DMA_LO_PAGE_0           0x87    /* DMA page registers */
-#define DMA_LO_PAGE_1           0x83
-#define DMA_LO_PAGE_2           0x81
-#define DMA_LO_PAGE_3           0x82
-#define DMA_LO_PAGE_5           0x8B
-#define DMA_LO_PAGE_6           0x89
-#define DMA_LO_PAGE_7           0x8A
-
-#define DMA_HI_PAGE_0           0x487   /* DMA page registers */
-#define DMA_HI_PAGE_1           0x483
-#define DMA_HI_PAGE_2           0x481
-#define DMA_HI_PAGE_3           0x482
-#define DMA_HI_PAGE_5           0x48B
-#define DMA_HI_PAGE_6           0x489
-#define DMA_HI_PAGE_7           0x48A
-
-#define DMA1_EXT_REG            0x40B
-#define DMA2_EXT_REG            0x4D6
-
-#ifndef __powerpc64__
-    /* in arch/ppc/kernel/setup.c -- Cort */
-    extern unsigned int DMA_MODE_WRITE;
-    extern unsigned int DMA_MODE_READ;
-    extern unsigned long ISA_DMA_THRESHOLD;
-#else
-    #define DMA_MODE_READ       0x44    /* I/O to memory, no autoinit, increment, single mode */
-    #define DMA_MODE_WRITE      0x48    /* memory to I/O, no autoinit, increment, single mode */
-#endif
-
-#define DMA_MODE_CASCADE        0xC0    /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT            0x10
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-        unsigned long flags;
-        spin_lock_irqsave(&dma_spin_lock, flags);
-        return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-        spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-        unsigned char ucDmaCmd = 0x00;
-
-        if (dmanr != 4) {
-                dma_outb(0, DMA2_MASK_REG);     /* This may not be enabled */
-                dma_outb(ucDmaCmd, DMA2_CMD_REG);       /* Enable group */
-        }
-        if (dmanr <= 3) {
-                dma_outb(dmanr, DMA1_MASK_REG);
-                dma_outb(ucDmaCmd, DMA1_CMD_REG);       /* Enable group */
-        } else {
-                dma_outb(dmanr & 3, DMA2_MASK_REG);
-        }
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-        if (dmanr <= 3)
-                dma_outb(dmanr | 4, DMA1_MASK_REG);
-        else
-                dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-        if (dmanr <= 3)
-                dma_outb(0, DMA1_CLEAR_FF_REG);
-        else
-                dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-        if (dmanr <= 3)
-                dma_outb(mode | dmanr, DMA1_MODE_REG);
-        else
-                dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
-{
-        switch (dmanr) {
-        case 0:
-                dma_outb(pagenr, DMA_LO_PAGE_0);
-                dma_outb(pagenr >> 8, DMA_HI_PAGE_0);
-                break;
-        case 1:
-                dma_outb(pagenr, DMA_LO_PAGE_1);
-                dma_outb(pagenr >> 8, DMA_HI_PAGE_1);
-                break;
-        case 2:
-                dma_outb(pagenr, DMA_LO_PAGE_2);
-                dma_outb(pagenr >> 8, DMA_HI_PAGE_2);
-                break;
-        case 3:
-                dma_outb(pagenr, DMA_LO_PAGE_3);
-                dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
-                break;
-        case 5:
-                dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
-                dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
-                break;
-        case 6:
-                dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
-                dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
-                break;
-        case 7:
-                dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
-                dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
-                break;
-        }
-}
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
-{
-        if (dmanr <= 3) {
-                dma_outb(phys & 0xff,
-                         ((dmanr & 3) << 1) + IO_DMA1_BASE);
-                dma_outb((phys >> 8) & 0xff,
-                         ((dmanr & 3) << 1) + IO_DMA1_BASE);
-        } else {
-                dma_outb((phys >> 1) & 0xff,
-                         ((dmanr & 3) << 2) + IO_DMA2_BASE);
-                dma_outb((phys >> 9) & 0xff,
-                         ((dmanr & 3) << 2) + IO_DMA2_BASE);
-        }
-        set_dma_page(dmanr, phys >> 16);
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-        count--;
-        if (dmanr <= 3) {
-                dma_outb(count & 0xff,
-                         ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
-                dma_outb((count >> 8) & 0xff,
-                         ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
-        } else {
-                dma_outb((count >> 1) & 0xff,
-                         ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
-                dma_outb((count >> 9) & 0xff,
-                         ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
-        }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-        unsigned int io_port = (dmanr <= 3)
-            ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
-            : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
-
-        /* using short to get 16-bit wrap around */
-        unsigned short count;
-
-        count = 1 + dma_inb(io_port);
-        count += dma_inb(io_port) << 8;
-
-        return (dmanr <= 3) ? count : (count << 1);
-}
-
-/* These are in kernel/dma.c: */
-
-/* reserve a DMA channel */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-/* release it again */
-extern void free_dma(unsigned int dmanr);
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-#endif  /* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */
-
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_DMA_H */
diff --git a/include/asm-powerpc/edac.h b/include/asm-powerpc/edac.h
deleted file mode 100644
index 6ead88bbfbb8..000000000000
--- a/include/asm-powerpc/edac.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * PPC EDAC common defs
- *
- * Author: Dave Jiang <djiang@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef ASM_EDAC_H
-#define ASM_EDAC_H
-/*
- * ECC atomic, DMA, SMP and interrupt safe scrub function.
- * Implements the per arch atomic_scrub() that EDAC use for software
- * ECC scrubbing.  It reads memory and then writes back the original
- * value, allowing the hardware to detect and correct memory errors.
- */
-static __inline__ void atomic_scrub(void *va, u32 size)
-{
-        unsigned int *virt_addr = va;
-        unsigned int temp;
-        unsigned int i;
-
-        for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
-                /* Very carefully read and write to memory atomically
-                 * so we are interrupt, DMA and SMP safe.
-                 */
-                __asm__ __volatile__ ("\n\
-                                1:      lwarx   %0,0,%1\n\
-                                        stwcx.  %0,0,%1\n\
-                                        bne-    1b\n\
-                                        isync"
-                                        : "=&r"(temp)
-                                        : "r"(virt_addr)
-                                        : "cr0", "memory");
-        }
-}
-
-#endif
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
deleted file mode 100644
index b886bec67016..000000000000
--- a/include/asm-powerpc/eeh.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * eeh.h
- * Copyright (C) 2001  Dave Engebretsen & Todd Inglett IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _PPC64_EEH_H
-#define _PPC64_EEH_H
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/string.h>
-
-struct pci_dev;
-struct pci_bus;
-struct device_node;
-
-#ifdef CONFIG_EEH
-
-extern int eeh_subsystem_enabled;
-
-/* Values for eeh_mode bits in device_node */
-#define EEH_MODE_SUPPORTED     (1<<0)
-#define EEH_MODE_NOCHECK       (1<<1)
-#define EEH_MODE_ISOLATED      (1<<2)
-#define EEH_MODE_RECOVERING    (1<<3)
-#define EEH_MODE_IRQ_DISABLED  (1<<4)
-
-/* Max number of EEH freezes allowed before we consider the device
- * to be permanently disabled. */
-#define EEH_MAX_ALLOWED_FREEZES 5
-
-void __init eeh_init(void);
-unsigned long eeh_check_failure(const volatile void __iomem *token,
-                                unsigned long val);
-int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
-void __init pci_addr_cache_build(void);
-
-/**
- * eeh_add_device_early
- * eeh_add_device_late
- *
- * Perform eeh initialization for devices added after boot.
- * Call eeh_add_device_early before doing any i/o to the
- * device (including config space i/o).  Call eeh_add_device_late
- * to finish the eeh setup for this device.
- */
-void eeh_add_device_tree_early(struct device_node *);
-void eeh_add_device_tree_late(struct pci_bus *);
-
-/**
- * eeh_remove_device_recursive - undo EEH for device & children.
- * @dev: pci device to be removed
- *
- * As above, this removes the device; it also removes child
- * pci devices as well.
- */
-void eeh_remove_bus_device(struct pci_dev *);
-
-/**
- * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
- *
- * If this macro yields TRUE, the caller relays to eeh_check_failure()
- * which does further tests out of line.
- */
-#define EEH_POSSIBLE_ERROR(val, type)   ((val) == (type)~0 && eeh_subsystem_enabled)
-
-/*
- * Reads from a device which has been isolated by EEH will return
- * all 1s.  This macro gives an all-1s value of the given size (in
- * bytes: 1, 2, or 4) for comparing with the result of a read.
- */
-#define EEH_IO_ERROR_VALUE(size)        (~0U >> ((4 - (size)) * 8))
-
-#else /* !CONFIG_EEH */
-static inline void eeh_init(void) { }
-
-static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
-{
-        return val;
-}
-
-static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
-{
-        return 0;
-}
-
-static inline void pci_addr_cache_build(void) { }
-
-static inline void eeh_add_device_tree_early(struct device_node *dn) { }
-
-static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
-
-static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
-#define EEH_POSSIBLE_ERROR(val, type) (0)
-#define EEH_IO_ERROR_VALUE(size) (-1UL)
-#endif /* CONFIG_EEH */
-
-/*
- * MMIO read/write operations with EEH support.
- */
-static inline u8 eeh_readb(const volatile void __iomem *addr)
-{
-        u8 val = in_8(addr);
-        if (EEH_POSSIBLE_ERROR(val, u8))
-                return eeh_check_failure(addr, val);
-        return val;
-}
-
-static inline u16 eeh_readw(const volatile void __iomem *addr)
-{
-        u16 val = in_le16(addr);
-        if (EEH_POSSIBLE_ERROR(val, u16))
-                return eeh_check_failure(addr, val);
-        return val;
-}
-
-static inline u32 eeh_readl(const volatile void __iomem *addr)
-{
-        u32 val = in_le32(addr);
-        if (EEH_POSSIBLE_ERROR(val, u32))
-                return eeh_check_failure(addr, val);
-        return val;
-}
-
-static inline u64 eeh_readq(const volatile void __iomem *addr)
-{
-        u64 val = in_le64(addr);
-        if (EEH_POSSIBLE_ERROR(val, u64))
-                return eeh_check_failure(addr, val);
-        return val;
-}
-
-static inline u16 eeh_readw_be(const volatile void __iomem *addr)
-{
-        u16 val = in_be16(addr);
-        if (EEH_POSSIBLE_ERROR(val, u16))
-                return eeh_check_failure(addr, val);
-        return val;
-}
-
-static inline u32 eeh_readl_be(const volatile void __iomem *addr)
-{
-        u32 val = in_be32(addr);
-        if (EEH_POSSIBLE_ERROR(val, u32))
-                return eeh_check_failure(addr, val);
-        return val;
-}
-
-static inline u64 eeh_readq_be(const volatile void __iomem *addr)
-{
-        u64 val = in_be64(addr);
-        if (EEH_POSSIBLE_ERROR(val, u64))
-                return eeh_check_failure(addr, val);
-        return val;
-}
-
-static inline void eeh_memcpy_fromio(void *dest, const
-                                     volatile void __iomem *src,
-                                     unsigned long n)
-{
-        _memcpy_fromio(dest, src, n);
-
-        /* Look for ffff's here at dest[n].  Assume that at least 4 bytes
-         * were copied. Check all four bytes.
-         */
-        if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32))
-                eeh_check_failure(src, *((u32 *)(dest + n - 4)));
-}
-
-/* in-string eeh macros */
-static inline void eeh_readsb(const volatile void __iomem *addr, void * buf,
-                              int ns)
-{
-        _insb(addr, buf, ns);
-        if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8))
-                eeh_check_failure(addr, *(u8*)buf);
-}
-
-static inline void eeh_readsw(const volatile void __iomem *addr, void * buf,
-                              int ns)
-{
-        _insw(addr, buf, ns);
-        if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16))
-                eeh_check_failure(addr, *(u16*)buf);
-}
-
-static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
-                              int nl)
-{
-        _insl(addr, buf, nl);
-        if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32))
-                eeh_check_failure(addr, *(u32*)buf);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_EEH_H */
diff --git a/include/asm-powerpc/eeh_event.h b/include/asm-powerpc/eeh_event.h
deleted file mode 100644
index cc3cb04539ac..000000000000
--- a/include/asm-powerpc/eeh_event.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *      eeh_event.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
- */
-
-#ifndef ASM_POWERPC_EEH_EVENT_H
-#define ASM_POWERPC_EEH_EVENT_H
-#ifdef __KERNEL__
-
-/** EEH event -- structure holding pci controller data that describes
- *  a change in the isolation status of a PCI slot.  A pointer
- *  to this struct is passed as the data pointer in a notify callback.
- */
-struct eeh_event {
-        struct list_head     list;
-        struct device_node      *dn;   /* struct device node */
-        struct pci_dev       *dev;  /* affected device */
-};
-
-/**
- * eeh_send_failure_event - generate a PCI error event
- * @dev pci device
- *
- * This routine builds a PCI error event which will be delivered
- * to all listeners on the eeh_notifier_chain.
- *
- * This routine can be called within an interrupt context;
- * the actual event will be delivered in a normal context
- * (from a workqueue).
- */
-int eeh_send_failure_event (struct device_node *dn,
-                            struct pci_dev *dev);
-
-/* Main recovery function */
-struct pci_dn * handle_eeh_events (struct eeh_event *);
-
-#endif /* __KERNEL__ */
-#endif /* ASM_POWERPC_EEH_EVENT_H */
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
deleted file mode 100644
index 80d1f399ee51..000000000000
--- a/include/asm-powerpc/elf.h
+++ /dev/null
@@ -1,424 +0,0 @@
-#ifndef _ASM_POWERPC_ELF_H
-#define _ASM_POWERPC_ELF_H
-
-#ifdef __KERNEL__
-#include <linux/sched.h>        /* for task_struct */
-#include <asm/page.h>
-#include <asm/string.h>
-#endif
-
-#include <asm/types.h>
-#include <asm/ptrace.h>
-#include <asm/cputable.h>
-#include <asm/auxvec.h>
-
-/* PowerPC relocations defined by the ABIs */
-#define R_PPC_NONE              0
-#define R_PPC_ADDR32            1       /* 32bit absolute address */
-#define R_PPC_ADDR24            2       /* 26bit address, 2 bits ignored.  */
-#define R_PPC_ADDR16            3       /* 16bit absolute address */
-#define R_PPC_ADDR16_LO         4       /* lower 16bit of absolute address */
-#define R_PPC_ADDR16_HI         5       /* high 16bit of absolute address */
-#define R_PPC_ADDR16_HA         6       /* adjusted high 16bit */
-#define R_PPC_ADDR14            7       /* 16bit address, 2 bits ignored */
-#define R_PPC_ADDR14_BRTAKEN    8
-#define R_PPC_ADDR14_BRNTAKEN   9
-#define R_PPC_REL24             10      /* PC relative 26 bit */
-#define R_PPC_REL14             11      /* PC relative 16 bit */
-#define R_PPC_REL14_BRTAKEN     12
-#define R_PPC_REL14_BRNTAKEN    13
-#define R_PPC_GOT16             14
-#define R_PPC_GOT16_LO          15
-#define R_PPC_GOT16_HI          16
-#define R_PPC_GOT16_HA          17
-#define R_PPC_PLTREL24          18
-#define R_PPC_COPY              19
-#define R_PPC_GLOB_DAT          20
-#define R_PPC_JMP_SLOT          21
-#define R_PPC_RELATIVE          22
-#define R_PPC_LOCAL24PC         23
-#define R_PPC_UADDR32           24
-#define R_PPC_UADDR16           25
-#define R_PPC_REL32             26
-#define R_PPC_PLT32             27
-#define R_PPC_PLTREL32          28
-#define R_PPC_PLT16_LO          29
-#define R_PPC_PLT16_HI          30
-#define R_PPC_PLT16_HA          31
-#define R_PPC_SDAREL16          32
-#define R_PPC_SECTOFF           33
-#define R_PPC_SECTOFF_LO        34
-#define R_PPC_SECTOFF_HI        35
-#define R_PPC_SECTOFF_HA        36
-
-/* PowerPC relocations defined for the TLS access ABI.  */
-#define R_PPC_TLS               67 /* none      (sym+add)@tls */
-#define R_PPC_DTPMOD32          68 /* word32    (sym+add)@dtpmod */
-#define R_PPC_TPREL16           69 /* half16*   (sym+add)@tprel */
-#define R_PPC_TPREL16_LO        70 /* half16    (sym+add)@tprel@l */
-#define R_PPC_TPREL16_HI        71 /* half16    (sym+add)@tprel@h */
-#define R_PPC_TPREL16_HA        72 /* half16    (sym+add)@tprel@ha */
-#define R_PPC_TPREL32           73 /* word32    (sym+add)@tprel */
-#define R_PPC_DTPREL16          74 /* half16*   (sym+add)@dtprel */
-#define R_PPC_DTPREL16_LO       75 /* half16    (sym+add)@dtprel@l */
-#define R_PPC_DTPREL16_HI       76 /* half16    (sym+add)@dtprel@h */
-#define R_PPC_DTPREL16_HA       77 /* half16    (sym+add)@dtprel@ha */
-#define R_PPC_DTPREL32          78 /* word32    (sym+add)@dtprel */
-#define R_PPC_GOT_TLSGD16       79 /* half16*   (sym+add)@got@tlsgd */
-#define R_PPC_GOT_TLSGD16_LO    80 /* half16    (sym+add)@got@tlsgd@l */
-#define R_PPC_GOT_TLSGD16_HI    81 /* half16    (sym+add)@got@tlsgd@h */
-#define R_PPC_GOT_TLSGD16_HA    82 /* half16    (sym+add)@got@tlsgd@ha */
-#define R_PPC_GOT_TLSLD16       83 /* half16*   (sym+add)@got@tlsld */
-#define R_PPC_GOT_TLSLD16_LO    84 /* half16    (sym+add)@got@tlsld@l */
-#define R_PPC_GOT_TLSLD16_HI    85 /* half16    (sym+add)@got@tlsld@h */
-#define R_PPC_GOT_TLSLD16_HA    86 /* half16    (sym+add)@got@tlsld@ha */
-#define R_PPC_GOT_TPREL16       87 /* half16*   (sym+add)@got@tprel */
-#define R_PPC_GOT_TPREL16_LO    88 /* half16    (sym+add)@got@tprel@l */
-#define R_PPC_GOT_TPREL16_HI    89 /* half16    (sym+add)@got@tprel@h */
-#define R_PPC_GOT_TPREL16_HA    90 /* half16    (sym+add)@got@tprel@ha */
-#define R_PPC_GOT_DTPREL16      91 /* half16*   (sym+add)@got@dtprel */
-#define R_PPC_GOT_DTPREL16_LO   92 /* half16*   (sym+add)@got@dtprel@l */
-#define R_PPC_GOT_DTPREL16_HI   93 /* half16*   (sym+add)@got@dtprel@h */
-#define R_PPC_GOT_DTPREL16_HA   94 /* half16*   (sym+add)@got@dtprel@ha */
-
-/* keep this the last entry. */
-#define R_PPC_NUM               95
-
-/*
- * ELF register definitions..
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define ELF_NGREG       48      /* includes nip, msr, lr, etc. */
-#define ELF_NFPREG      33      /* includes fpscr */
-
-typedef unsigned long elf_greg_t64;
-typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
-
-typedef unsigned int elf_greg_t32;
-typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
-typedef elf_gregset_t32 compat_elf_gregset_t;
-
-/*
- * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
- */
-#ifdef __powerpc64__
-# define ELF_NVRREG32   33      /* includes vscr & vrsave stuffed together */
-# define ELF_NVRREG     34      /* includes vscr & vrsave in split vectors */
-# define ELF_NVSRHALFREG 32     /* Half the vsx registers */
-# define ELF_GREG_TYPE  elf_greg_t64
-#else
-# define ELF_NEVRREG    34      /* includes acc (as 2) */
-# define ELF_NVRREG     33      /* includes vscr */
-# define ELF_GREG_TYPE  elf_greg_t32
-# define ELF_ARCH       EM_PPC
-# define ELF_CLASS      ELFCLASS32
-# define ELF_DATA       ELFDATA2MSB
-#endif /* __powerpc64__ */
-
-#ifndef ELF_ARCH
-# define ELF_ARCH       EM_PPC64
-# define ELF_CLASS      ELFCLASS64
-# define ELF_DATA       ELFDATA2MSB
-  typedef elf_greg_t64 elf_greg_t;
-  typedef elf_gregset_t64 elf_gregset_t;
-#else
-  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
-  typedef elf_greg_t32 elf_greg_t;
-  typedef elf_gregset_t32 elf_gregset_t;
-#endif /* ELF_ARCH */
-
-/* Floating point registers */
-typedef double elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
-
-/* Altivec registers */
-/*
- * The entries with indexes 0-31 contain the corresponding vector registers. 
- * The entry with index 32 contains the vscr as the last word (offset 12) 
- * within the quadword.  This allows the vscr to be stored as either a 
- * quadword (since it must be copied via a vector register to/from storage) 
- * or as a word.  
- *
- * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
- * word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32 
- * ptrace interface.  This allows signal handling and ptrace to use the same 
- * structures.  This also simplifies the implementation of a bi-arch 
- * (combined (32- and 64-bit) gdb.
- *
- * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
- * vrsave along with vscr and so only uses 33 vectors for the register set
- */
-typedef __vector128 elf_vrreg_t;
-typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
-#ifdef __powerpc64__
-typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
-typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
-#endif
-
-#ifdef __KERNEL__
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
-#define compat_elf_check_arch(x)        ((x)->e_machine == EM_PPC)
-
-#define USE_ELF_CORE_DUMP
-#define CORE_DUMP_USE_REGSET
-#define ELF_EXEC_PAGESIZE       PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (0x20000000)
-
-/*
- * Our registers are always unsigned longs, whether we're a 32 bit
- * process or 64 bit, on either a 64 bit or 32 bit kernel.
- *
- * This macro relies on elf_regs[i] having the right type to truncate to,
- * either u32 or u64.  It defines the body of the elf_core_copy_regs
- * function, either the native one with elf_gregset_t elf_regs or
- * the 32-bit one with elf_gregset_t32 elf_regs.
- */
-#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \
-        int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \
-                           (size_t)ELF_NGREG);                    \
-        for (i = 0; i < nregs; i++) \
-                elf_regs[i] = ((unsigned long *) regs)[i]; \
-        memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0]))
-
-/* Common routine for both 32-bit and 64-bit native processes */
-static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs,
-                                          struct pt_regs *regs)
-{
-        PPC_ELF_CORE_COPY_REGS(elf_regs, regs);
-}
-#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs);
-
-typedef elf_vrregset_t elf_fpxregset_t;
-
-/* ELF_HWCAP yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  This could be done in userspace,
-   but it's not easy, and we've already done it here.  */
-# define ELF_HWCAP      (cur_cpu_spec->cpu_user_features)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM    (cur_cpu_spec->platform)
-
-/* While ELF_PLATFORM indicates the ISA supported by the platform, it
- * may not accurately reflect the underlying behavior of the hardware
- * (as in the case of running in Power5+ compatibility mode on a
- * Power6 machine).  ELF_BASE_PLATFORM allows ld.so to load libraries
- * that are tuned for the real hardware.
- */
-#define ELF_BASE_PLATFORM (powerpc_base_platform)
-
-#ifdef __powerpc64__
-# define ELF_PLAT_INIT(_r, load_addr)   do {    \
-        _r->gpr[2] = load_addr;                 \
-} while (0)
-#endif /* __powerpc64__ */
-
-#ifdef __powerpc64__
-# define SET_PERSONALITY(ex, ibcs2)                             \
-do {                                                            \
-        unsigned long new_flags = 0;                            \
-        if ((ex).e_ident[EI_CLASS] == ELFCLASS32)               \
-                new_flags = _TIF_32BIT;                         \
-        if ((current_thread_info()->flags & _TIF_32BIT)         \
-            != new_flags)                                       \
-                set_thread_flag(TIF_ABI_PENDING);               \
-        else                                                    \
-                clear_thread_flag(TIF_ABI_PENDING);             \
-        if (personality(current->personality) != PER_LINUX32)   \
-                set_personality(PER_LINUX |                     \
-                        (current->personality & (~PER_MASK)));  \
-} while (0)
-/*
- * An executable for which elf_read_implies_exec() returns TRUE will
- * have the READ_IMPLIES_EXEC personality flag set automatically. This
- * is only required to work around bugs in old 32bit toolchains. Since
- * the 64bit ABI has never had these issues dont enable the workaround
- * even if we have an executable stack.
- */
-# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
-                (exec_stk != EXSTACK_DISABLE_X) : 0)
-#else 
-# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-#endif /* __powerpc64__ */
-
-extern int dcache_bsize;
-extern int icache_bsize;
-extern int ucache_bsize;
-
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-                                       int executable_stack);
-#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
-
-#endif /* __KERNEL__ */
-
-/*
- * The requirements here are:
- * - keep the final alignment of sp (sp & 0xf)
- * - make sure the 32-bit value at the first 16 byte aligned position of
- *   AUXV is greater than 16 for glibc compatibility.
- *   AT_IGNOREPPC is used for that.
- * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
- *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
- * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
- */
-#define ARCH_DLINFO                                                     \
-do {                                                                    \
-        /* Handle glibc compatibility. */                               \
-        NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);                        \
-        NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);                        \
-        /* Cache size items */                                          \
-        NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);                      \
-        NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);                      \
-        NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);                      \
-        VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base)   \
-} while (0)
-
-/* PowerPC64 relocations defined by the ABIs */
-#define R_PPC64_NONE    R_PPC_NONE
-#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
-#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
-#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
-#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
-#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
-#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
-#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
-#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
-#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
-#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
-#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
-#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
-#define R_PPC64_GOT16     R_PPC_GOT16
-#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
-#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
-#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
-
-#define R_PPC64_COPY      R_PPC_COPY
-#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
-#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
-#define R_PPC64_RELATIVE  R_PPC_RELATIVE
-
-#define R_PPC64_UADDR32   R_PPC_UADDR32
-#define R_PPC64_UADDR16   R_PPC_UADDR16
-#define R_PPC64_REL32     R_PPC_REL32
-#define R_PPC64_PLT32     R_PPC_PLT32
-#define R_PPC64_PLTREL32  R_PPC_PLTREL32
-#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
-#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
-#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
-
-#define R_PPC64_SECTOFF     R_PPC_SECTOFF
-#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
-#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
-#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
-#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
-#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
-#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
-#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
-#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
-#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
-#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
-#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
-#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
-#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
-#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
-#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
-#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
-#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
-#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
-#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
-#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
-#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
-#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
-
-#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
-#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
-#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
-#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
-#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
-#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
-#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
-#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
-#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
-#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
-#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
-
-/* PowerPC64 relocations defined for the TLS access ABI.  */
-#define R_PPC64_TLS             67 /* none      (sym+add)@tls */
-#define R_PPC64_DTPMOD64        68 /* doubleword64 (sym+add)@dtpmod */
-#define R_PPC64_TPREL16         69 /* half16*   (sym+add)@tprel */
-#define R_PPC64_TPREL16_LO      70 /* half16    (sym+add)@tprel@l */
-#define R_PPC64_TPREL16_HI      71 /* half16    (sym+add)@tprel@h */
-#define R_PPC64_TPREL16_HA      72 /* half16    (sym+add)@tprel@ha */
-#define R_PPC64_TPREL64         73 /* doubleword64 (sym+add)@tprel */
-#define R_PPC64_DTPREL16        74 /* half16*   (sym+add)@dtprel */
-#define R_PPC64_DTPREL16_LO     75 /* half16    (sym+add)@dtprel@l */
-#define R_PPC64_DTPREL16_HI     76 /* half16    (sym+add)@dtprel@h */
-#define R_PPC64_DTPREL16_HA     77 /* half16    (sym+add)@dtprel@ha */
-#define R_PPC64_DTPREL64        78 /* doubleword64 (sym+add)@dtprel */
-#define R_PPC64_GOT_TLSGD16     79 /* half16*   (sym+add)@got@tlsgd */
-#define R_PPC64_GOT_TLSGD16_LO  80 /* half16    (sym+add)@got@tlsgd@l */
-#define R_PPC64_GOT_TLSGD16_HI  81 /* half16    (sym+add)@got@tlsgd@h */
-#define R_PPC64_GOT_TLSGD16_HA  82 /* half16    (sym+add)@got@tlsgd@ha */
-#define R_PPC64_GOT_TLSLD16     83 /* half16*   (sym+add)@got@tlsld */
-#define R_PPC64_GOT_TLSLD16_LO  84 /* half16    (sym+add)@got@tlsld@l */
-#define R_PPC64_GOT_TLSLD16_HI  85 /* half16    (sym+add)@got@tlsld@h */
-#define R_PPC64_GOT_TLSLD16_HA  86 /* half16    (sym+add)@got@tlsld@ha */
-#define R_PPC64_GOT_TPREL16_DS  87 /* half16ds* (sym+add)@got@tprel */
-#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-#define R_PPC64_GOT_TPREL16_HI  89 /* half16    (sym+add)@got@tprel@h */
-#define R_PPC64_GOT_TPREL16_HA  90 /* half16    (sym+add)@got@tprel@ha */
-#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */
-#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-#define R_PPC64_GOT_DTPREL16_HI 93 /* half16    (sym+add)@got@dtprel@h */
-#define R_PPC64_GOT_DTPREL16_HA 94 /* half16    (sym+add)@got@dtprel@ha */
-#define R_PPC64_TPREL16_DS      95 /* half16ds* (sym+add)@tprel */
-#define R_PPC64_TPREL16_LO_DS   96 /* half16ds  (sym+add)@tprel@l */
-#define R_PPC64_TPREL16_HIGHER  97 /* half16    (sym+add)@tprel@higher */
-#define R_PPC64_TPREL16_HIGHERA 98 /* half16    (sym+add)@tprel@highera */
-#define R_PPC64_TPREL16_HIGHEST 99 /* half16    (sym+add)@tprel@highest */
-#define R_PPC64_TPREL16_HIGHESTA 100 /* half16  (sym+add)@tprel@highesta */
-#define R_PPC64_DTPREL16_DS     101 /* half16ds* (sym+add)@dtprel */
-#define R_PPC64_DTPREL16_LO_DS  102 /* half16ds (sym+add)@dtprel@l */
-#define R_PPC64_DTPREL16_HIGHER 103 /* half16   (sym+add)@dtprel@higher */
-#define R_PPC64_DTPREL16_HIGHERA 104 /* half16  (sym+add)@dtprel@highera */
-#define R_PPC64_DTPREL16_HIGHEST 105 /* half16  (sym+add)@dtprel@highest */
-#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */
-
-/* Keep this the last entry.  */
-#define R_PPC64_NUM             107
-
-#ifdef  __KERNEL__
-
-#ifdef CONFIG_SPU_BASE
-/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
-#define NT_SPU          1
-
-#define ARCH_HAVE_EXTRA_ELF_NOTES
-
-#endif /* CONFIG_SPU_BASE */
-
-#endif /* __KERNEL */
-
-#endif /* _ASM_POWERPC_ELF_H */
diff --git a/include/asm-powerpc/emergency-restart.h b/include/asm-powerpc/emergency-restart.h
deleted file mode 100644
index 3711bd9d50bd..000000000000
--- a/include/asm-powerpc/emergency-restart.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/emergency-restart.h>
diff --git a/include/asm-powerpc/errno.h b/include/asm-powerpc/errno.h
deleted file mode 100644
index 8c145fd17d86..000000000000
--- a/include/asm-powerpc/errno.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_POWERPC_ERRNO_H
-#define _ASM_POWERPC_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#undef  EDEADLOCK
-#define EDEADLOCK       58      /* File locking deadlock error */
-
-#define _LAST_ERRNO     516
-
-#endif  /* _ASM_POWERPC_ERRNO_H */
diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h
deleted file mode 100644
index 329148b5acc6..000000000000
--- a/include/asm-powerpc/exception.h
+++ /dev/null
@@ -1,311 +0,0 @@
-#ifndef _ASM_POWERPC_EXCEPTION_H
-#define _ASM_POWERPC_EXCEPTION_H
-/*
- * Extracted from head_64.S
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *
- *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
- *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
- *
- *  This file contains the low-level support and setup for the
- *  PowerPC-64 platform, including trap and interrupt dispatch.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-/*
- * The following macros define the code that appears as
- * the prologue to each of the exception handlers.  They
- * are split into two parts to allow a single kernel binary
- * to be used for pSeries and iSeries.
- *
- * We make as much of the exception code common between native
- * exception handlers (including pSeries LPAR) and iSeries LPAR
- * implementations as possible.
- */
-
-#define EX_R9           0
-#define EX_R10          8
-#define EX_R11          16
-#define EX_R12          24
-#define EX_R13          32
-#define EX_SRR0         40
-#define EX_DAR          48
-#define EX_DSISR        56
-#define EX_CCR          60
-#define EX_R3           64
-#define EX_LR           72
-
-/*
- * We're short on space and time in the exception prolog, so we can't
- * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
- * low halfword of the address, but for Kdump we need the whole low
- * word.
- */
-#ifdef CONFIG_CRASH_DUMP
-#define LOAD_HANDLER(reg, label)                                        \
-        oris    reg,reg,(label)@h;      /* virt addr of handler ... */  \
-        ori     reg,reg,(label)@l;      /* .. and the rest */
-#else
-#define LOAD_HANDLER(reg, label)                                        \
-        ori     reg,reg,(label)@l;      /* virt addr of handler ... */
-#endif
-
-#define EXCEPTION_PROLOG_1(area)                                \
-        mfspr   r13,SPRN_SPRG3;         /* get paca address into r13 */ \
-        std     r9,area+EX_R9(r13);     /* save r9 - r12 */             \
-        std     r10,area+EX_R10(r13);                                   \
-        std     r11,area+EX_R11(r13);                                   \
-        std     r12,area+EX_R12(r13);                                   \
-        mfspr   r9,SPRN_SPRG1;                                          \
-        std     r9,area+EX_R13(r13);                                    \
-        mfcr    r9
-
-/*
- * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
- * The firmware calls the registered system_reset_fwnmi and
- * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
- * a 32bit application at the time of the event.
- * This firmware bug is present on POWER4 and JS20.
- */
-#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)               \
-        EXCEPTION_PROLOG_1(area);                                       \
-        clrrdi  r12,r13,32;             /* get high part of &label */   \
-        mfmsr   r10;                                                    \
-        /* force 64bit mode */                                          \
-        li      r11,5;                  /* MSR_SF_LG|MSR_ISF_LG */      \
-        rldimi  r10,r11,61,0;           /* insert into top 3 bits */    \
-        /* done 64bit mode */                                           \
-        mfspr   r11,SPRN_SRR0;          /* save SRR0 */                 \
-        LOAD_HANDLER(r12,label)                                         \
-        ori     r10,r10,MSR_IR|MSR_DR|MSR_RI;                           \
-        mtspr   SPRN_SRR0,r12;                                          \
-        mfspr   r12,SPRN_SRR1;          /* and SRR1 */                  \
-        mtspr   SPRN_SRR1,r10;                                          \
-        rfid;                                                           \
-        b       .       /* prevent speculative execution */
-
-#define EXCEPTION_PROLOG_PSERIES(area, label)                           \
-        EXCEPTION_PROLOG_1(area);                                       \
-        clrrdi  r12,r13,32;             /* get high part of &label */   \
-        mfmsr   r10;                                                    \
-        mfspr   r11,SPRN_SRR0;          /* save SRR0 */                 \
-        LOAD_HANDLER(r12,label)                                         \
-        ori     r10,r10,MSR_IR|MSR_DR|MSR_RI;                           \
-        mtspr   SPRN_SRR0,r12;                                          \
-        mfspr   r12,SPRN_SRR1;          /* and SRR1 */                  \
-        mtspr   SPRN_SRR1,r10;                                          \
-        rfid;                                                           \
-        b       .       /* prevent speculative execution */
-
-/*
- * The common exception prolog is used for all except a few exceptions
- * such as a segment miss on a kernel address.  We have to be prepared
- * to take another exception from the point where we first touch the
- * kernel stack onwards.
- *
- * On entry r13 points to the paca, r9-r13 are saved in the paca,
- * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
- * SRR1, and relocation is on.
- */
-#define EXCEPTION_PROLOG_COMMON(n, area)                                   \
-        andi.   r10,r12,MSR_PR;         /* See if coming from user      */ \
-        mr      r10,r1;                 /* Save r1                      */ \
-        subi    r1,r1,INT_FRAME_SIZE;   /* alloc frame on kernel stack  */ \
-        beq-    1f;                                                        \
-        ld      r1,PACAKSAVE(r13);      /* kernel stack to use          */ \
-1:      cmpdi   cr1,r1,0;               /* check if r1 is in userspace  */ \
-        bge-    cr1,2f;                 /* abort if it is               */ \
-        b       3f;                                                        \
-2:      li      r1,(n);                 /* will be reloaded later       */ \
-        sth     r1,PACA_TRAP_SAVE(r13);                                    \
-        b       bad_stack;                                                 \
-3:      std     r9,_CCR(r1);            /* save CR in stackframe        */ \
-        std     r11,_NIP(r1);           /* save SRR0 in stackframe      */ \
-        std     r12,_MSR(r1);           /* save SRR1 in stackframe      */ \
-        std     r10,0(r1);              /* make stack chain pointer     */ \
-        std     r0,GPR0(r1);            /* save r0 in stackframe        */ \
-        std     r10,GPR1(r1);           /* save r1 in stackframe        */ \
-        ACCOUNT_CPU_USER_ENTRY(r9, r10);                                   \
-        std     r2,GPR2(r1);            /* save r2 in stackframe        */ \
-        SAVE_4GPRS(3, r1);              /* save r3 - r6 in stackframe   */ \
-        SAVE_2GPRS(7, r1);              /* save r7, r8 in stackframe    */ \
-        ld      r9,area+EX_R9(r13);     /* move r9, r10 to stackframe   */ \
-        ld      r10,area+EX_R10(r13);                                      \
-        std     r9,GPR9(r1);                                               \
-        std     r10,GPR10(r1);                                             \
-        ld      r9,area+EX_R11(r13);    /* move r11 - r13 to stackframe */ \
-        ld      r10,area+EX_R12(r13);                                      \
-        ld      r11,area+EX_R13(r13);                                      \
-        std     r9,GPR11(r1);                                              \
-        std     r10,GPR12(r1);                                             \
-        std     r11,GPR13(r1);                                             \
-        ld      r2,PACATOC(r13);        /* get kernel TOC into r2       */ \
-        mflr    r9;                     /* save LR in stackframe        */ \
-        std     r9,_LINK(r1);                                              \
-        mfctr   r10;                    /* save CTR in stackframe       */ \
-        std     r10,_CTR(r1);                                              \
-        lbz     r10,PACASOFTIRQEN(r13);                            \
-        mfspr   r11,SPRN_XER;           /* save XER in stackframe       */ \
-        std     r10,SOFTE(r1);                                             \
-        std     r11,_XER(r1);                                              \
-        li      r9,(n)+1;                                                  \
-        std     r9,_TRAP(r1);           /* set trap number              */ \
-        li      r10,0;                                                     \
-        ld      r11,exception_marker@toc(r2);                              \
-        std     r10,RESULT(r1);         /* clear regs->result           */ \
-        std     r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame      */
-
-/*
- * Exception vectors.
- */
-#define STD_EXCEPTION_PSERIES(n, label)                 \
-        . = n;                                          \
-        .globl label##_pSeries;                         \
-label##_pSeries:                                        \
-        HMT_MEDIUM;                                     \
-        mtspr   SPRN_SPRG1,r13;         /* save r13 */  \
-        EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-#define HSTD_EXCEPTION_PSERIES(n, label)                \
-        . = n;                                          \
-        .globl label##_pSeries;                         \
-label##_pSeries:                                        \
-        HMT_MEDIUM;                                     \
-        mtspr   SPRN_SPRG1,r20;         /* save r20 */  \
-        mfspr   r20,SPRN_HSRR0;         /* copy HSRR0 to SRR0 */ \
-        mtspr   SPRN_SRR0,r20;                          \
-        mfspr   r20,SPRN_HSRR1;         /* copy HSRR0 to SRR0 */ \
-        mtspr   SPRN_SRR1,r20;                          \
-        mfspr   r20,SPRN_SPRG1;         /* restore r20 */ \
-        mtspr   SPRN_SPRG1,r13;         /* save r13 */  \
-        EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label)                            \
-        . = n;                                                          \
-        .globl label##_pSeries;                                         \
-label##_pSeries:                                                        \
-        HMT_MEDIUM;                                                     \
-        mtspr   SPRN_SPRG1,r13;         /* save r13 */                  \
-        mfspr   r13,SPRN_SPRG3;         /* get paca address into r13 */ \
-        std     r9,PACA_EXGEN+EX_R9(r13);       /* save r9, r10 */      \
-        std     r10,PACA_EXGEN+EX_R10(r13);                             \
-        lbz     r10,PACASOFTIRQEN(r13);                                 \
-        mfcr    r9;                                                     \
-        cmpwi   r10,0;                                                  \
-        beq     masked_interrupt;                                       \
-        mfspr   r10,SPRN_SPRG1;                                         \
-        std     r10,PACA_EXGEN+EX_R13(r13);                             \
-        std     r11,PACA_EXGEN+EX_R11(r13);                             \
-        std     r12,PACA_EXGEN+EX_R12(r13);                             \
-        clrrdi  r12,r13,32;             /* get high part of &label */   \
-        mfmsr   r10;                                                    \
-        mfspr   r11,SPRN_SRR0;          /* save SRR0 */                 \
-        LOAD_HANDLER(r12,label##_common)                                \
-        ori     r10,r10,MSR_IR|MSR_DR|MSR_RI;                           \
-        mtspr   SPRN_SRR0,r12;                                          \
-        mfspr   r12,SPRN_SRR1;          /* and SRR1 */                  \
-        mtspr   SPRN_SRR1,r10;                                          \
-        rfid;                                                           \
-        b       .       /* prevent speculative execution */
-
-#ifdef CONFIG_PPC_ISERIES
-#define DISABLE_INTS                            \
-        li      r11,0;                          \
-        stb     r11,PACASOFTIRQEN(r13);         \
-BEGIN_FW_FTR_SECTION;                           \
-        stb     r11,PACAHARDIRQEN(r13);         \
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);   \
-        TRACE_DISABLE_INTS;                     \
-BEGIN_FW_FTR_SECTION;                           \
-        mfmsr   r10;                            \
-        ori     r10,r10,MSR_EE;                 \
-        mtmsrd  r10,1;                          \
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#else
-#define DISABLE_INTS                            \
-        li      r11,0;                          \
-        stb     r11,PACASOFTIRQEN(r13);         \
-        stb     r11,PACAHARDIRQEN(r13);         \
-        TRACE_DISABLE_INTS
-#endif /* CONFIG_PPC_ISERIES */
-
-#define ENABLE_INTS                             \
-        ld      r12,_MSR(r1);                   \
-        mfmsr   r11;                            \
-        rlwimi  r11,r12,0,MSR_EE;               \
-        mtmsrd  r11,1
-
-#define STD_EXCEPTION_COMMON(trap, label, hdlr)         \
-        .align  7;                                      \
-        .globl label##_common;                          \
-label##_common:                                         \
-        EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);      \
-        DISABLE_INTS;                                   \
-        bl      .save_nvgprs;                           \
-        addi    r3,r1,STACK_FRAME_OVERHEAD;             \
-        bl      hdlr;                                   \
-        b       .ret_from_except
-
-/*
- * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
- * in the idle task and therefore need the special idle handling.
- */
-#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)    \
-        .align  7;                                      \
-        .globl label##_common;                          \
-label##_common:                                         \
-        EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);      \
-        FINISH_NAP;                                     \
-        DISABLE_INTS;                                   \
-        bl      .save_nvgprs;                           \
-        addi    r3,r1,STACK_FRAME_OVERHEAD;             \
-        bl      hdlr;                                   \
-        b       .ret_from_except
-
-#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)    \
-        .align  7;                                      \
-        .globl label##_common;                          \
-label##_common:                                         \
-        EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);      \
-        FINISH_NAP;                                     \
-        DISABLE_INTS;                                   \
-BEGIN_FTR_SECTION                                       \
-        bl      .ppc64_runlatch_on;                     \
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)                     \
-        addi    r3,r1,STACK_FRAME_OVERHEAD;             \
-        bl      hdlr;                                   \
-        b       .ret_from_except_lite
-
-/*
- * When the idle code in power4_idle puts the CPU into NAP mode,
- * it has to do so in a loop, and relies on the external interrupt
- * and decrementer interrupt entry code to get it out of the loop.
- * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
- * to signal that it is in the loop and needs help to get out.
- */
-#ifdef CONFIG_PPC_970_NAP
-#define FINISH_NAP                              \
-BEGIN_FTR_SECTION                               \
-        clrrdi  r11,r1,THREAD_SHIFT;            \
-        ld      r9,TI_LOCAL_FLAGS(r11);         \
-        andi.   r10,r9,_TLF_NAPPING;            \
-        bnel    power4_fixup_nap;               \
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-#else
-#define FINISH_NAP
-#endif
-
-#endif  /* _ASM_POWERPC_EXCEPTION_H */
diff --git a/include/asm-powerpc/fb.h b/include/asm-powerpc/fb.h
deleted file mode 100644
index 411af8d17a69..000000000000
--- a/include/asm-powerpc/fb.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-                                unsigned long off)
-{
-        vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT,
-                                                 vma->vm_end - vma->vm_start,
-                                                 vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-        return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-powerpc/fcntl.h b/include/asm-powerpc/fcntl.h
deleted file mode 100644
index ce5c4516d404..000000000000
--- a/include/asm-powerpc/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_FCNTL_H
-#define _ASM_FCNTL_H
-
-#define O_DIRECTORY      040000 /* must be a directory */
-#define O_NOFOLLOW      0100000 /* don't follow links */
-#define O_LARGEFILE     0200000
-#define O_DIRECT        0400000 /* direct disk access hint */
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _ASM_FCNTL_H */
diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h
deleted file mode 100644
index a1029967620b..000000000000
--- a/include/asm-powerpc/feature-fixups.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H
-#define __ASM_POWERPC_FEATURE_FIXUPS_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __ASSEMBLY__
-
-/*
- * Feature section common macros
- *
- * Note that the entries now contain offsets between the table entry
- * and the code rather than absolute code pointers in order to be
- * useable with the vdso shared library. There is also an assumption
- * that values will be negative, that is, the fixup table has to be
- * located after the code it fixes up.
- */
-#if defined(CONFIG_PPC64) && !defined(__powerpc64__)
-/* 64 bits kernel, 32 bits code (ie. vdso32) */
-#define FTR_ENTRY_LONG          .llong
-#define FTR_ENTRY_OFFSET        .long 0xffffffff; .long
-#else
-/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
-#define FTR_ENTRY_LONG          PPC_LONG
-#define FTR_ENTRY_OFFSET        PPC_LONG
-#endif
-
-#define START_FTR_SECTION(label)        label##1:
-
-#define FTR_SECTION_ELSE_NESTED(label)                  \
-label##2:                                               \
-        .pushsection __ftr_alt_##label,"a";             \
-        .align 2;                                       \
-label##3:
-
-#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect)   \
-label##4:                                               \
-        .popsection;                                    \
-        .pushsection sect,"a";                          \
-        .align 3;                                       \
-label##5:                                               \
-        FTR_ENTRY_LONG msk;                             \
-        FTR_ENTRY_LONG val;                             \
-        FTR_ENTRY_OFFSET label##1b-label##5b;           \
-        FTR_ENTRY_OFFSET label##2b-label##5b;           \
-        FTR_ENTRY_OFFSET label##3b-label##5b;           \
-        FTR_ENTRY_OFFSET label##4b-label##5b;           \
-        .popsection;
-
-
-/* CPU feature dependent sections */
-#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label)
-#define BEGIN_FTR_SECTION               START_FTR_SECTION(97)
-
-#define END_FTR_SECTION_NESTED(msk, val, label)                 \
-        FTR_SECTION_ELSE_NESTED(label)                          \
-        MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
-
-#define END_FTR_SECTION(msk, val)               \
-        END_FTR_SECTION_NESTED(msk, val, 97)
-
-#define END_FTR_SECTION_IFSET(msk)      END_FTR_SECTION((msk), (msk))
-#define END_FTR_SECTION_IFCLR(msk)      END_FTR_SECTION((msk), 0)
-
-/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */
-#define FTR_SECTION_ELSE        FTR_SECTION_ELSE_NESTED(97)
-#define ALT_FTR_SECTION_END_NESTED(msk, val, label)     \
-        MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
-#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label)    \
-        ALT_FTR_SECTION_END_NESTED(msk, msk, label)
-#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label)    \
-        ALT_FTR_SECTION_END_NESTED(msk, 0, label)
-#define ALT_FTR_SECTION_END(msk, val)   \
-        ALT_FTR_SECTION_END_NESTED(msk, val, 97)
-#define ALT_FTR_SECTION_END_IFSET(msk)  \
-        ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97)
-#define ALT_FTR_SECTION_END_IFCLR(msk)  \
-        ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
-
-/* Firmware feature dependent sections */
-#define BEGIN_FW_FTR_SECTION_NESTED(label)      START_FTR_SECTION(label)
-#define BEGIN_FW_FTR_SECTION                    START_FTR_SECTION(97)
-
-#define END_FW_FTR_SECTION_NESTED(msk, val, label)              \
-        FTR_SECTION_ELSE_NESTED(label)                          \
-        MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
-
-#define END_FW_FTR_SECTION(msk, val)            \
-        END_FW_FTR_SECTION_NESTED(msk, val, 97)
-
-#define END_FW_FTR_SECTION_IFSET(msk)   END_FW_FTR_SECTION((msk), (msk))
-#define END_FW_FTR_SECTION_IFCLR(msk)   END_FW_FTR_SECTION((msk), 0)
-
-/* Firmware feature sections with alternatives */
-#define FW_FTR_SECTION_ELSE_NESTED(label)       FTR_SECTION_ELSE_NESTED(label)
-#define FW_FTR_SECTION_ELSE     FTR_SECTION_ELSE_NESTED(97)
-#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label)  \
-        MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
-#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \
-        ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label)
-#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \
-        ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label)
-#define ALT_FW_FTR_SECTION_END(msk, val)        \
-        ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97)
-#define ALT_FW_FTR_SECTION_END_IFSET(msk)       \
-        ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97)
-#define ALT_FW_FTR_SECTION_END_IFCLR(msk)       \
-        ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
-
-#endif /* __ASSEMBLY__ */
-
-/* LWSYNC feature sections */
-#define START_LWSYNC_SECTION(label)     label##1:
-#define MAKE_LWSYNC_SECTION_ENTRY(label, sect)          \
-label##2:                                               \
-        .pushsection sect,"a";                          \
-        .align 2;                                       \
-label##3:                                               \
-        .long label##1b-label##3b;                      \
-        .popsection;
-
-#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
deleted file mode 100644
index 3a179827528d..000000000000
--- a/include/asm-powerpc/firmware.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- *  Modifications for ppc64:
- *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_POWERPC_FIRMWARE_H
-#define __ASM_POWERPC_FIRMWARE_H
-
-#ifdef __KERNEL__
-
-#include <asm/asm-compat.h>
-#include <asm/feature-fixups.h>
-
-/* firmware feature bitmask values */
-#define FIRMWARE_MAX_FEATURES 63
-
-#define FW_FEATURE_PFT          ASM_CONST(0x0000000000000001)
-#define FW_FEATURE_TCE          ASM_CONST(0x0000000000000002)
-#define FW_FEATURE_SPRG0        ASM_CONST(0x0000000000000004)
-#define FW_FEATURE_DABR         ASM_CONST(0x0000000000000008)
-#define FW_FEATURE_COPY         ASM_CONST(0x0000000000000010)
-#define FW_FEATURE_ASR          ASM_CONST(0x0000000000000020)
-#define FW_FEATURE_DEBUG        ASM_CONST(0x0000000000000040)
-#define FW_FEATURE_TERM         ASM_CONST(0x0000000000000080)
-#define FW_FEATURE_PERF         ASM_CONST(0x0000000000000100)
-#define FW_FEATURE_DUMP         ASM_CONST(0x0000000000000200)
-#define FW_FEATURE_INTERRUPT    ASM_CONST(0x0000000000000400)
-#define FW_FEATURE_MIGRATE      ASM_CONST(0x0000000000000800)
-#define FW_FEATURE_PERFMON      ASM_CONST(0x0000000000001000)
-#define FW_FEATURE_CRQ          ASM_CONST(0x0000000000002000)
-#define FW_FEATURE_VIO          ASM_CONST(0x0000000000004000)
-#define FW_FEATURE_RDMA         ASM_CONST(0x0000000000008000)
-#define FW_FEATURE_LLAN         ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK         ASM_CONST(0x0000000000020000)
-#define FW_FEATURE_XDABR        ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE     ASM_CONST(0x0000000000080000)
-#define FW_FEATURE_SPLPAR       ASM_CONST(0x0000000000100000)
-#define FW_FEATURE_ISERIES      ASM_CONST(0x0000000000200000)
-#define FW_FEATURE_LPAR         ASM_CONST(0x0000000000400000)
-#define FW_FEATURE_PS3_LV1      ASM_CONST(0x0000000000800000)
-#define FW_FEATURE_BEAT         ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_BULK_REMOVE  ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_CMO          ASM_CONST(0x0000000004000000)
-
-#ifndef __ASSEMBLY__
-
-enum {
-#ifdef CONFIG_PPC64
-        FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE |
-                FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY |
-                FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM |
-                FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
-                FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
-                FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
-                FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
-                FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
-        FW_FEATURE_PSERIES_ALWAYS = 0,
-        FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
-        FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
-        FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
-        FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
-        FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
-        FW_FEATURE_CELLEB_ALWAYS = 0,
-        FW_FEATURE_NATIVE_POSSIBLE = 0,
-        FW_FEATURE_NATIVE_ALWAYS = 0,
-        FW_FEATURE_POSSIBLE =
-#ifdef CONFIG_PPC_PSERIES
-                FW_FEATURE_PSERIES_POSSIBLE |
-#endif
-#ifdef CONFIG_PPC_ISERIES
-                FW_FEATURE_ISERIES_POSSIBLE |
-#endif
-#ifdef CONFIG_PPC_PS3
-                FW_FEATURE_PS3_POSSIBLE |
-#endif
-#ifdef CONFIG_PPC_CELLEB
-                FW_FEATURE_CELLEB_POSSIBLE |
-#endif
-#ifdef CONFIG_PPC_NATIVE
-                FW_FEATURE_NATIVE_ALWAYS |
-#endif
-                0,
-        FW_FEATURE_ALWAYS =
-#ifdef CONFIG_PPC_PSERIES
-                FW_FEATURE_PSERIES_ALWAYS &
-#endif
-#ifdef CONFIG_PPC_ISERIES
-                FW_FEATURE_ISERIES_ALWAYS &
-#endif
-#ifdef CONFIG_PPC_PS3
-                FW_FEATURE_PS3_ALWAYS &
-#endif
-#ifdef CONFIG_PPC_CELLEB
-                FW_FEATURE_CELLEB_ALWAYS &
-#endif
-#ifdef CONFIG_PPC_NATIVE
-                FW_FEATURE_NATIVE_ALWAYS &
-#endif
-                FW_FEATURE_POSSIBLE,
-
-#else /* CONFIG_PPC64 */
-        FW_FEATURE_POSSIBLE = 0,
-        FW_FEATURE_ALWAYS = 0,
-#endif
-};
-
-/* This is used to identify firmware features which are available
- * to the kernel.
- */
-extern unsigned long    powerpc_firmware_features;
-
-#define firmware_has_feature(feature)                                   \
-        ((FW_FEATURE_ALWAYS & (feature)) ||                             \
-                (FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature)))
-
-extern void system_reset_fwnmi(void);
-extern void machine_check_fwnmi(void);
-
-/* This is true if we are using the firmware NMI handler (typically LPAR) */
-extern int fwnmi_active;
-
-extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/include/asm-powerpc/fixmap.h b/include/asm-powerpc/fixmap.h
deleted file mode 100644
index 8428b38a3d30..000000000000
--- a/include/asm-powerpc/fixmap.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * fixmap.h: compile-time virtual memory allocation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Copyright 2008 Freescale Semiconductor Inc.
- *   Port to powerpc added by Kumar Gala
- */
-
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
-
-extern unsigned long FIXADDR_TOP;
-
-#ifndef __ASSEMBLY__
-#include <linux/kernel.h>
-#include <asm/page.h>
-#ifdef CONFIG_HIGHMEM
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
-#endif
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
- * from the end of virtual memory (0xfffff000) backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-enum fixed_addresses {
-        FIX_HOLE,
-#ifdef CONFIG_HIGHMEM
-        FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
-        FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#endif
-        /* FIX_PCIE_MCFG, */
-        __end_of_fixed_addresses
-};
-
-extern void __set_fixmap (enum fixed_addresses idx,
-                                        phys_addr_t phys, pgprot_t flags);
-
-#define set_fixmap(idx, phys) \
-                __set_fixmap(idx, phys, PAGE_KERNEL)
-/*
- * Some hardware wants to get fixmapped without caching.
- */
-#define set_fixmap_nocache(idx, phys) \
-                __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
-
-#define clear_fixmap(idx) \
-                __set_fixmap(idx, 0, __pgprot(0))
-
-#define __FIXADDR_SIZE  (__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START           (FIXADDR_TOP - __FIXADDR_SIZE)
-
-#define __fix_to_virt(x)        (FIXADDR_TOP - ((x) << PAGE_SHIFT))
-#define __virt_to_fix(x)        ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
-
-extern void __this_fixmap_does_not_exist(void);
-
-/*
- * 'index to address' translation. If anyone tries to use the idx
- * directly without tranlation, we catch the bug with a NULL-deference
- * kernel oops. Illegal ranges of incoming indices are caught too.
- */
-static __always_inline unsigned long fix_to_virt(const unsigned int idx)
-{
-        /*
-         * this branch gets completely eliminated after inlining,
-         * except when someone tries to use fixaddr indices in an
-         * illegal way. (such as mixing up address types or using
-         * out-of-range indices).
-         *
-         * If it doesn't get removed, the linker will complain
-         * loudly with a reasonably clear error message..
-         */
-        if (idx >= __end_of_fixed_addresses)
-                __this_fixmap_does_not_exist();
-
-        return __fix_to_virt(idx);
-}
-
-static inline unsigned long virt_to_fix(const unsigned long vaddr)
-{
-        BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
-        return __virt_to_fix(vaddr);
-}
-
-#endif /* !__ASSEMBLY__ */
-#endif
diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h
deleted file mode 100644
index 24bd34c57e9d..000000000000
--- a/include/asm-powerpc/floppy.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef __ASM_POWERPC_FLOPPY_H
-#define __ASM_POWERPC_FLOPPY_H
-#ifdef __KERNEL__
-
-#include <asm/machdep.h>
-
-#define fd_inb(port)            inb_p(port)
-#define fd_outb(value,port)     outb_p(value,port)
-
-#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
-#define fd_disable_dma()         fd_ops->_disable_dma(FLOPPY_DMA)
-#define fd_free_dma()           fd_ops->_free_dma(FLOPPY_DMA)
-#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
-#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA, mode)
-#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
-#define fd_get_dma_residue()    fd_ops->_get_dma_residue(FLOPPY_DMA)
-#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
-#define fd_cacheflush(addr,size) /* nothing */
-#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
-
-#include <linux/pci.h>
-#include <asm/ppc-pci.h>        /* for isa_bridge_pcidev */
-
-#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io)
-
-static int fd_request_dma(void);
-
-struct fd_dma_ops {
-        void (*_disable_dma)(unsigned int dmanr);
-        void (*_free_dma)(unsigned int dmanr);
-        int (*_get_dma_residue)(unsigned int dummy);
-        int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-};
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_vdma;
-static struct fd_dma_ops *fd_ops;
-
-static irqreturn_t floppy_hardint(int irq, void *dev_id)
-{
-        unsigned char st;
-        int lcount;
-        char *lptr;
-
-        if (!doing_vdma)
-                return floppy_interrupt(irq, dev_id);
-
-
-        st = 1;
-        for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
-             lcount; lcount--, lptr++) {
-                st=inb(virtual_dma_port+4) & 0xa0 ;
-                if (st != 0xa0)
-                        break;
-                if (virtual_dma_mode)
-                        outb_p(*lptr, virtual_dma_port+5);
-                else
-                        *lptr = inb_p(virtual_dma_port+5);
-        }
-        virtual_dma_count = lcount;
-        virtual_dma_addr = lptr;
-        st = inb(virtual_dma_port+4);
-
-        if (st == 0x20)
-                return IRQ_HANDLED;
-        if (!(st & 0x20)) {
-                virtual_dma_residue += virtual_dma_count;
-                virtual_dma_count=0;
-                doing_vdma = 0;
-                floppy_interrupt(irq, dev_id);
-                return IRQ_HANDLED;
-        }
-        return IRQ_HANDLED;
-}
-
-static void vdma_disable_dma(unsigned int dummy)
-{
-        doing_vdma = 0;
-        virtual_dma_residue += virtual_dma_count;
-        virtual_dma_count=0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
-        return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
-        if (can_use_virtual_dma)
-                return request_irq(FLOPPY_IRQ, floppy_hardint,
-                                   IRQF_DISABLED, "floppy", NULL);
-        else
-                return request_irq(FLOPPY_IRQ, floppy_interrupt,
-                                   IRQF_DISABLED, "floppy", NULL);
-}
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-        doing_vdma = 1;
-        virtual_dma_port = io;
-        virtual_dma_mode = (mode  == DMA_MODE_WRITE);
-        virtual_dma_addr = addr;
-        virtual_dma_count = size;
-        virtual_dma_residue = 0;
-        return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-        static unsigned long prev_size;
-        static dma_addr_t bus_addr = 0;
-        static char *prev_addr;
-        static int prev_dir;
-        int dir;
-
-        doing_vdma = 0;
-        dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
-
-        if (bus_addr 
-            && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
-                /* different from last time -- unmap prev */
-                pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir);
-                bus_addr = 0;
-        }
-
-        if (!bus_addr)  /* need to map it */
-                bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir);
-
-        /* remember this one as prev */
-        prev_addr = addr;
-        prev_size = size;
-        prev_dir = dir;
-
-        fd_clear_dma_ff();
-        fd_cacheflush(addr, size);
-        fd_set_dma_mode(mode);
-        set_dma_addr(FLOPPY_DMA, bus_addr);
-        fd_set_dma_count(size);
-        virtual_dma_port = io;
-        fd_enable_dma();
-
-        return 0;
-}
-
-static struct fd_dma_ops real_dma_ops =
-{
-        ._disable_dma = disable_dma,
-        ._free_dma = free_dma,
-        ._get_dma_residue = get_dma_residue,
-        ._dma_setup = hard_dma_setup
-};
-
-static struct fd_dma_ops virt_dma_ops =
-{
-        ._disable_dma = vdma_disable_dma,
-        ._free_dma = vdma_nop,
-        ._get_dma_residue = vdma_get_dma_residue,
-        ._dma_setup = vdma_dma_setup
-};
-
-static int fd_request_dma(void)
-{
-        if (can_use_virtual_dma & 1) {
-                fd_ops = &virt_dma_ops;
-                return 0;
-        }
-        else {
-                fd_ops = &real_dma_ops;
-                return request_dma(FLOPPY_DMA, "floppy");
-        }
-}
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Again, the CMOS information not available
- */
-#define FLOPPY0_TYPE 6
-#define FLOPPY1_TYPE 0
-
-#define N_FDC 2                 /* Don't change this! */
-#define N_DRIVE 8
-
-/*
- * The PowerPC has no problems with floppy DMA crossing 64k borders.
- */
-#define CROSS_64KB(a,s) (0)
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_FLOPPY_H */
diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h
deleted file mode 100644
index 9361cd5342cc..000000000000
--- a/include/asm-powerpc/fs_pd.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Platform information definitions.
- *
- * 2006 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef FS_PD_H
-#define FS_PD_H
-#include <sysdev/fsl_soc.h>
-#include <asm/time.h>
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-
-#if defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#endif
-
-#define cpm2_map(member) (&cpm2_immr->member)
-#define cpm2_map_size(member, size) (&cpm2_immr->member)
-#define cpm2_unmap(addr) do {} while(0)
-#endif
-
-#ifdef CONFIG_8xx
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-
-extern immap_t __iomem *mpc8xx_immr;
-
-#define immr_map(member) (&mpc8xx_immr->member)
-#define immr_map_size(member, size) (&mpc8xx_immr->member)
-#define immr_unmap(addr) do {} while (0)
-#endif
-
-static inline int uart_baudrate(void)
-{
-        return get_baudrate();
-}
-
-static inline int uart_clock(void)
-{
-        return ppc_proc_freq;
-}
-
-#endif
diff --git a/include/asm-powerpc/fsl_gtm.h b/include/asm-powerpc/fsl_gtm.h
deleted file mode 100644
index 8e8c9b5032d3..000000000000
--- a/include/asm-powerpc/fsl_gtm.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Freescale General-purpose Timers Module
- *
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
- *               Shlomi Gridish <gridish@freescale.com>
- *               Jerry Huang <Chang-Ming.Huang@freescale.com>
- * Copyright (c) MontaVista Software, Inc. 2008.
- *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_FSL_GTM_H
-#define __ASM_FSL_GTM_H
-
-#include <linux/types.h>
-
-struct gtm;
-
-struct gtm_timer {
-        unsigned int irq;
-
-        struct gtm *gtm;
-        bool requested;
-        u8 __iomem *gtcfr;
-        __be16 __iomem *gtmdr;
-        __be16 __iomem *gtpsr;
-        __be16 __iomem *gtcnr;
-        __be16 __iomem *gtrfr;
-        __be16 __iomem *gtevr;
-};
-
-extern struct gtm_timer *gtm_get_timer16(void);
-extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
-                                                  unsigned int timer);
-extern void gtm_put_timer16(struct gtm_timer *tmr);
-extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec,
-                             bool reload);
-extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec,
-                                 bool reload);
-extern void gtm_stop_timer16(struct gtm_timer *tmr);
-extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events);
-
-#endif /* __ASM_FSL_GTM_H */
diff --git a/include/asm-powerpc/fsl_lbc.h b/include/asm-powerpc/fsl_lbc.h
deleted file mode 100644
index 303f5484c050..000000000000
--- a/include/asm-powerpc/fsl_lbc.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/* Freescale Local Bus Controller
- *
- * Copyright (c) 2006-2007 Freescale Semiconductor
- *
- * Authors: Nick Spence <nick.spence@freescale.com>,
- *          Scott Wood <scottwood@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_FSL_LBC_H
-#define __ASM_FSL_LBC_H
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
-
-struct fsl_lbc_bank {
-        __be32 br;             /**< Base Register  */
-#define BR_BA           0xFFFF8000
-#define BR_BA_SHIFT             15
-#define BR_PS           0x00001800
-#define BR_PS_SHIFT             11
-#define BR_PS_8         0x00000800  /* Port Size 8 bit */
-#define BR_PS_16        0x00001000  /* Port Size 16 bit */
-#define BR_PS_32        0x00001800  /* Port Size 32 bit */
-#define BR_DECC         0x00000600
-#define BR_DECC_SHIFT            9
-#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
-#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
-#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
-#define BR_WP           0x00000100
-#define BR_WP_SHIFT              8
-#define BR_MSEL         0x000000E0
-#define BR_MSEL_SHIFT            5
-#define BR_MS_GPCM      0x00000000  /* GPCM */
-#define BR_MS_FCM       0x00000020  /* FCM */
-#define BR_MS_SDRAM     0x00000060  /* SDRAM */
-#define BR_MS_UPMA      0x00000080  /* UPMA */
-#define BR_MS_UPMB      0x000000A0  /* UPMB */
-#define BR_MS_UPMC      0x000000C0  /* UPMC */
-#define BR_V            0x00000001
-#define BR_V_SHIFT               0
-#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
-
-        __be32 or;             /**< Base Register  */
-#define OR0 0x5004
-#define OR1 0x500C
-#define OR2 0x5014
-#define OR3 0x501C
-#define OR4 0x5024
-#define OR5 0x502C
-#define OR6 0x5034
-#define OR7 0x503C
-
-#define OR_FCM_AM               0xFFFF8000
-#define OR_FCM_AM_SHIFT                 15
-#define OR_FCM_BCTLD            0x00001000
-#define OR_FCM_BCTLD_SHIFT              12
-#define OR_FCM_PGS              0x00000400
-#define OR_FCM_PGS_SHIFT                10
-#define OR_FCM_CSCT             0x00000200
-#define OR_FCM_CSCT_SHIFT                9
-#define OR_FCM_CST              0x00000100
-#define OR_FCM_CST_SHIFT                 8
-#define OR_FCM_CHT              0x00000080
-#define OR_FCM_CHT_SHIFT                 7
-#define OR_FCM_SCY              0x00000070
-#define OR_FCM_SCY_SHIFT                 4
-#define OR_FCM_SCY_1            0x00000010
-#define OR_FCM_SCY_2            0x00000020
-#define OR_FCM_SCY_3            0x00000030
-#define OR_FCM_SCY_4            0x00000040
-#define OR_FCM_SCY_5            0x00000050
-#define OR_FCM_SCY_6            0x00000060
-#define OR_FCM_SCY_7            0x00000070
-#define OR_FCM_RST              0x00000008
-#define OR_FCM_RST_SHIFT                 3
-#define OR_FCM_TRLX             0x00000004
-#define OR_FCM_TRLX_SHIFT                2
-#define OR_FCM_EHTR             0x00000002
-#define OR_FCM_EHTR_SHIFT                1
-};
-
-struct fsl_lbc_regs {
-        struct fsl_lbc_bank bank[8];
-        u8 res0[0x28];
-        __be32 mar;             /**< UPM Address Register */
-        u8 res1[0x4];
-        __be32 mamr;            /**< UPMA Mode Register */
-#define MxMR_OP_NO      (0 << 28) /**< normal operation */
-#define MxMR_OP_WA      (1 << 28) /**< write array */
-#define MxMR_OP_RA      (2 << 28) /**< read array */
-#define MxMR_OP_RP      (3 << 28) /**< run pattern */
-#define MxMR_MAD        0x3f      /**< machine address */
-        __be32 mbmr;            /**< UPMB Mode Register */
-        __be32 mcmr;            /**< UPMC Mode Register */
-        u8 res2[0x8];
-        __be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
-        __be32 mdr;             /**< UPM Data Register */
-        u8 res3[0x4];
-        __be32 lsor;            /**< Special Operation Initiation Register */
-        __be32 lsdmr;           /**< SDRAM Mode Register */
-        u8 res4[0x8];
-        __be32 lurt;            /**< UPM Refresh Timer */
-        __be32 lsrt;            /**< SDRAM Refresh Timer */
-        u8 res5[0x8];
-        __be32 ltesr;           /**< Transfer Error Status Register */
-#define LTESR_BM   0x80000000
-#define LTESR_FCT  0x40000000
-#define LTESR_PAR  0x20000000
-#define LTESR_WP   0x04000000
-#define LTESR_ATMW 0x00800000
-#define LTESR_ATMR 0x00400000
-#define LTESR_CS   0x00080000
-#define LTESR_CC   0x00000001
-#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
-        __be32 ltedr;           /**< Transfer Error Disable Register */
-        __be32 lteir;           /**< Transfer Error Interrupt Register */
-        __be32 lteatr;          /**< Transfer Error Attributes Register */
-        __be32 ltear;           /**< Transfer Error Address Register */
-        u8 res6[0xC];
-        __be32 lbcr;            /**< Configuration Register */
-#define LBCR_LDIS  0x80000000
-#define LBCR_LDIS_SHIFT    31
-#define LBCR_BCTLC 0x00C00000
-#define LBCR_BCTLC_SHIFT   22
-#define LBCR_AHD   0x00200000
-#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT   17
-#define LBCR_EPAR  0x00010000
-#define LBCR_EPAR_SHIFT    16
-#define LBCR_BMT   0x0000FF00
-#define LBCR_BMT_SHIFT      8
-#define LBCR_INIT  0x00040000
-        __be32 lcrr;            /**< Clock Ratio Register */
-#define LCRR_DBYP    0x80000000
-#define LCRR_DBYP_SHIFT      31
-#define LCRR_BUFCMDC 0x30000000
-#define LCRR_BUFCMDC_SHIFT   28
-#define LCRR_ECL     0x03000000
-#define LCRR_ECL_SHIFT       24
-#define LCRR_EADC    0x00030000
-#define LCRR_EADC_SHIFT      16
-#define LCRR_CLKDIV  0x0000000F
-#define LCRR_CLKDIV_SHIFT     0
-        u8 res7[0x8];
-        __be32 fmr;             /**< Flash Mode Register */
-#define FMR_CWTO     0x0000F000
-#define FMR_CWTO_SHIFT       12
-#define FMR_BOOT     0x00000800
-#define FMR_ECCM     0x00000100
-#define FMR_AL       0x00000030
-#define FMR_AL_SHIFT          4
-#define FMR_OP       0x00000003
-#define FMR_OP_SHIFT          0
-        __be32 fir;             /**< Flash Instruction Register */
-#define FIR_OP0      0xF0000000
-#define FIR_OP0_SHIFT        28
-#define FIR_OP1      0x0F000000
-#define FIR_OP1_SHIFT        24
-#define FIR_OP2      0x00F00000
-#define FIR_OP2_SHIFT        20
-#define FIR_OP3      0x000F0000
-#define FIR_OP3_SHIFT        16
-#define FIR_OP4      0x0000F000
-#define FIR_OP4_SHIFT        12
-#define FIR_OP5      0x00000F00
-#define FIR_OP5_SHIFT         8
-#define FIR_OP6      0x000000F0
-#define FIR_OP6_SHIFT         4
-#define FIR_OP7      0x0000000F
-#define FIR_OP7_SHIFT         0
-#define FIR_OP_NOP   0x0        /* No operation and end of sequence */
-#define FIR_OP_CA    0x1        /* Issue current column address */
-#define FIR_OP_PA    0x2        /* Issue current block+page address */
-#define FIR_OP_UA    0x3        /* Issue user defined address */
-#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
-#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
-#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
-#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
-#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
-#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
-        __be32 fcr;             /**< Flash Command Register */
-#define FCR_CMD0     0xFF000000
-#define FCR_CMD0_SHIFT       24
-#define FCR_CMD1     0x00FF0000
-#define FCR_CMD1_SHIFT       16
-#define FCR_CMD2     0x0000FF00
-#define FCR_CMD2_SHIFT        8
-#define FCR_CMD3     0x000000FF
-#define FCR_CMD3_SHIFT        0
-        __be32 fbar;            /**< Flash Block Address Register */
-#define FBAR_BLK     0x00FFFFFF
-        __be32 fpar;            /**< Flash Page Address Register */
-#define FPAR_SP_PI   0x00007C00
-#define FPAR_SP_PI_SHIFT     10
-#define FPAR_SP_MS   0x00000200
-#define FPAR_SP_CI   0x000001FF
-#define FPAR_SP_CI_SHIFT      0
-#define FPAR_LP_PI   0x0003F000
-#define FPAR_LP_PI_SHIFT     12
-#define FPAR_LP_MS   0x00000800
-#define FPAR_LP_CI   0x000007FF
-#define FPAR_LP_CI_SHIFT      0
-        __be32 fbcr;            /**< Flash Byte Count Register */
-#define FBCR_BC      0x00000FFF
-        u8 res11[0x8];
-        u8 res8[0xF00];
-};
-
-extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-extern spinlock_t fsl_lbc_lock;
-
-/*
- * FSL UPM routines
- */
-struct fsl_upm {
-        __be32 __iomem *mxmr;
-        int width;
-};
-
-extern int fsl_lbc_find(phys_addr_t addr_base);
-extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
-
-/**
- * fsl_upm_start_pattern - start UPM patterns execution
- * @upm:        pointer to the fsl_upm structure obtained via fsl_upm_find
- * @pat_offset: UPM pattern offset for the command to be executed
- *
- * This routine programmes UPM so the next memory access that hits an UPM
- * will trigger pattern execution, starting at pat_offset.
- */
-static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
-{
-        clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset);
-}
-
-/**
- * fsl_upm_end_pattern - end UPM patterns execution
- * @upm:        pointer to the fsl_upm structure obtained via fsl_upm_find
- *
- * This routine reverts UPM to normal operation mode.
- */
-static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
-{
-        clrbits32(upm->mxmr, MxMR_OP_RP);
-
-        while (in_be32(upm->mxmr) & MxMR_OP_RP)
-                cpu_relax();
-}
-
-/**
- * fsl_upm_run_pattern - actually run an UPM pattern
- * @upm:        pointer to the fsl_upm structure obtained via fsl_upm_find
- * @io_base:    remapped pointer to where memory access should happen
- * @mar:        MAR register content during pattern execution
- *
- * This function triggers dummy write to the memory specified by the io_base,
- * thus UPM pattern actually executed. Note that mar usage depends on the
- * pre-programmed AMX bits in the UPM RAM.
- */
-static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
-                                      void __iomem *io_base, u32 mar)
-{
-        int ret = 0;
-        unsigned long flags;
-
-        spin_lock_irqsave(&fsl_lbc_lock, flags);
-
-        out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
-
-        switch (upm->width) {
-        case 8:
-                out_8(io_base, 0x0);
-                break;
-        case 16:
-                out_be16(io_base, 0x0);
-                break;
-        case 32:
-                out_be32(io_base, 0x0);
-                break;
-        default:
-                ret = -EINVAL;
-                break;
-        }
-
-        spin_unlock_irqrestore(&fsl_lbc_lock, flags);
-
-        return ret;
-}
-
-#endif /* __ASM_FSL_LBC_H */
diff --git a/include/asm-powerpc/ftrace.h b/include/asm-powerpc/ftrace.h
deleted file mode 100644
index de921326cca8..000000000000
--- a/include/asm-powerpc/ftrace.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_POWERPC_FTRACE
-#define _ASM_POWERPC_FTRACE
-
-#ifdef CONFIG_FTRACE
-#define MCOUNT_ADDR             ((long)(_mcount))
-#define MCOUNT_INSN_SIZE        4 /* sizeof mcount call */
-
-#ifndef __ASSEMBLY__
-extern void _mcount(void);
-#endif
-
-#endif
-
-#endif /* _ASM_POWERPC_FTRACE */
diff --git a/include/asm-powerpc/futex.h b/include/asm-powerpc/futex.h
deleted file mode 100644
index 6d406c5c5de4..000000000000
--- a/include/asm-powerpc/futex.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _ASM_POWERPC_FUTEX_H
-#define _ASM_POWERPC_FUTEX_H
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-#include <asm/synch.h>
-#include <asm/asm-compat.h>
-
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
-  __asm__ __volatile ( \
-        LWSYNC_ON_SMP \
-"1:     lwarx   %0,0,%2\n" \
-        insn \
-        PPC405_ERR77(0, %2) \
-"2:     stwcx.  %1,0,%2\n" \
-        "bne-   1b\n" \
-        "li     %1,0\n" \
-"3:     .section .fixup,\"ax\"\n" \
-"4:     li      %1,%3\n" \
-        "b      3b\n" \
-        ".previous\n" \
-        ".section __ex_table,\"a\"\n" \
-        ".align 3\n" \
-        PPC_LONG "1b,4b,2b,4b\n" \
-        ".previous" \
-        : "=&r" (oldval), "=&r" (ret) \
-        : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
-        : "cr0", "memory")
-
-static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
-{
-        int op = (encoded_op >> 28) & 7;
-        int cmp = (encoded_op >> 24) & 15;
-        int oparg = (encoded_op << 8) >> 20;
-        int cmparg = (encoded_op << 20) >> 20;
-        int oldval = 0, ret;
-        if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-                oparg = 1 << oparg;
-
-        if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
-                return -EFAULT;
-
-        pagefault_disable();
-
-        switch (op) {
-        case FUTEX_OP_SET:
-                __futex_atomic_op("", ret, oldval, uaddr, oparg);
-                break;
-        case FUTEX_OP_ADD:
-                __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
-                break;
-        case FUTEX_OP_OR:
-                __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
-                break;
-        case FUTEX_OP_ANDN:
-                __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
-                break;
-        case FUTEX_OP_XOR:
-                __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
-                break;
-        default:
-                ret = -ENOSYS;
-        }
-
-        pagefault_enable();
-
-        if (!ret) {
-                switch (cmp) {
-                case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-                case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-                case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-                case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-                case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-                case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-                default: ret = -ENOSYS;
-                }
-        }
-        return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
-        int prev;
-
-        if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-                return -EFAULT;
-
-        __asm__ __volatile__ (
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
-        cmpw    0,%0,%3\n\
-        bne-    3f\n"
-        PPC405_ERR77(0,%2)
-"2:     stwcx.  %4,0,%2\n\
-        bne-    1b\n"
-        ISYNC_ON_SMP
-"3:     .section .fixup,\"ax\"\n\
-4:      li      %0,%5\n\
-        b       3b\n\
-        .previous\n\
-        .section __ex_table,\"a\"\n\
-        .align 3\n\
-        " PPC_LONG "1b,4b,2b,4b\n\
-        .previous" \
-        : "=&r" (prev), "+m" (*uaddr)
-        : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)
-        : "cc", "memory");
-
-        return prev;
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_FUTEX_H */
diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h
deleted file mode 100644
index ea04632399d8..000000000000
--- a/include/asm-powerpc/gpio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Generic GPIO API implementation for PowerPC.
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_POWERPC_GPIO_H
-#define __ASM_POWERPC_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * We don't (yet) implement inlined/rapid versions for on-chip gpios.
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-        return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-        __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-        return __gpio_cansleep(gpio);
-}
-
-/*
- * Not implemented, yet.
- */
-static inline int gpio_to_irq(unsigned int gpio)
-{
-        return -ENOSYS;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-        return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-powerpc/grackle.h b/include/asm-powerpc/grackle.h
deleted file mode 100644
index bd7812a519d4..000000000000
--- a/include/asm-powerpc/grackle.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_POWERPC_GRACKLE_H
-#define _ASM_POWERPC_GRACKLE_H
-#ifdef __KERNEL__
-/*
- * Functions for setting up and using a MPC106 northbridge
- */
-
-#include <asm/pci-bridge.h>
-
-extern void setup_grackle(struct pci_controller *hose);
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_GRACKLE_H */
diff --git a/include/asm-powerpc/hardirq.h b/include/asm-powerpc/hardirq.h
deleted file mode 100644
index 288e14d53b7f..000000000000
--- a/include/asm-powerpc/hardirq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _ASM_POWERPC_HARDIRQ_H
-#define _ASM_POWERPC_HARDIRQ_H
-#ifdef __KERNEL__
-
-#include <asm/irq.h>
-#include <asm/bug.h>
-
-/* The __last_jiffy_stamp field is needed to ensure that no decrementer
- * interrupt is lost on SMP machines. Since on most CPUs it is in the same
- * cache line as local_irq_count, it is cheap to access and is also used on UP
- * for uniformity.
- */
-typedef struct {
-        unsigned int __softirq_pending; /* set_bit is used on this */
-        unsigned int __last_jiffy_stamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
-
-#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
-
-static inline void ack_bad_irq(int irq)
-{
-        printk(KERN_CRIT "illegal vector %d received!\n", irq);
-        BUG();
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HARDIRQ_H */
diff --git a/include/asm-powerpc/heathrow.h b/include/asm-powerpc/heathrow.h
deleted file mode 100644
index 93f54958a9d1..000000000000
--- a/include/asm-powerpc/heathrow.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _ASM_POWERPC_HEATHROW_H
-#define _ASM_POWERPC_HEATHROW_H
-#ifdef __KERNEL__
-/*
- * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
- *
- * Grabbed from Open Firmware definitions on a PowerBook G3 Series
- *
- * Copyright (C) 1997 Paul Mackerras.
- */
-
-/* Front light color on Yikes/B&W G3. 32 bits */
-#define HEATHROW_FRONT_LIGHT            0x32 /* (set to 0 or 0xffffffff) */
-
-/* Brightness/contrast (gossamer iMac ?). 8 bits */
-#define HEATHROW_BRIGHTNESS_CNTL        0x32
-#define HEATHROW_CONTRAST_CNTL          0x33
-
-/* offset from ohare base for feature control register */
-#define HEATHROW_MBCR                   0x34    /* Media bay control */
-#define HEATHROW_FCR                    0x38    /* Feature control */
-#define HEATHROW_AUX_CNTL_REG           0x3c    /* Aux control */
-
-/*
- * Bits in feature control register.
- * Bits postfixed with a _N are in inverse logic
- */
-#define HRW_SCC_TRANS_EN_N      0x00000001      /* Also controls modem power */
-#define HRW_BAY_POWER_N         0x00000002
-#define HRW_BAY_PCI_ENABLE      0x00000004
-#define HRW_BAY_IDE_ENABLE      0x00000008
-#define HRW_BAY_FLOPPY_ENABLE   0x00000010
-#define HRW_IDE0_ENABLE         0x00000020
-#define HRW_IDE0_RESET_N        0x00000040
-#define HRW_BAY_DEV_MASK        0x0000001c
-#define HRW_BAY_RESET_N         0x00000080
-#define HRW_IOBUS_ENABLE        0x00000100      /* Internal IDE ? */
-#define HRW_SCC_ENABLE          0x00000200
-#define HRW_MESH_ENABLE         0x00000400
-#define HRW_SWIM_ENABLE         0x00000800
-#define HRW_SOUND_POWER_N       0x00001000
-#define HRW_SOUND_CLK_ENABLE    0x00002000
-#define HRW_SCCA_IO             0x00004000
-#define HRW_SCCB_IO             0x00008000
-#define HRW_PORT_OR_DESK_VIA_N  0x00010000      /* This one is 0 on PowerBook */
-#define HRW_PWM_MON_ID_N        0x00020000      /* ??? (0) */
-#define HRW_HOOK_MB_CNT_N       0x00040000      /* ??? (0) */
-#define HRW_SWIM_CLONE_FLOPPY   0x00080000      /* ??? (0) */
-#define HRW_AUD_RUN22           0x00100000      /* ??? (1) */
-#define HRW_SCSI_LINK_MODE      0x00200000      /* Read ??? (1) */
-#define HRW_ARB_BYPASS          0x00400000      /* Disable internal PCI arbitrer */
-#define HRW_IDE1_RESET_N        0x00800000      /* Media bay */
-#define HRW_SLOW_SCC_PCLK       0x01000000      /* ??? (0) */
-#define HRW_RESET_SCC           0x02000000
-#define HRW_MFDC_CELL_ENABLE    0x04000000      /* ??? (0) */
-#define HRW_USE_MFDC            0x08000000      /* ??? (0) */
-#define HRW_BMAC_IO_ENABLE      0x60000000      /* two bits, not documented in OF */
-#define HRW_BMAC_RESET          0x80000000      /* not documented in OF */
-
-/* We OR those features at boot on desktop G3s */
-#define HRW_DEFAULTS            (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
-
-/* Looks like Heathrow has some sort of GPIOs as well... */
-#define HRW_GPIO_MODEM_RESET    0x6d
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HEATHROW_H */
diff --git a/include/asm-powerpc/highmem.h b/include/asm-powerpc/highmem.h
deleted file mode 100644
index 5d99b6489d56..000000000000
--- a/include/asm-powerpc/highmem.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * highmem.h: virtual kernel memory mappings for high memory
- *
- * PowerPC version, stolen from the i386 version.
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- *                    Gerhard.Wichert@pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with
- * up to 16 Terrabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- */
-
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/kmap_types.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-#include <asm/fixmap.h>
-
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-#define LAST_PKMAP      (1 << PTE_SHIFT)
-#define LAST_PKMAP_MASK (LAST_PKMAP-1)
-#define PKMAP_BASE      ((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK)
-#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-extern void *kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-static inline void *kmap(struct page *page)
-{
-        might_sleep();
-        if (!PageHighMem(page))
-                return page_address(page);
-        return kmap_high(page);
-}
-
-static inline void kunmap(struct page *page)
-{
-        BUG_ON(in_interrupt());
-        if (!PageHighMem(page))
-                return;
-        kunmap_high(page);
-}
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
-        unsigned int idx;
-        unsigned long vaddr;
-
-        /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-        pagefault_disable();
-        if (!PageHighMem(page))
-                return page_address(page);
-
-        idx = type + KM_TYPE_NR*smp_processor_id();
-        vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
-        BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
-        set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
-        flush_tlb_page(NULL, vaddr);
-
-        return (void*) vaddr;
-}
-
-static inline void *kmap_atomic(struct page *page, enum km_type type)
-{
-        return kmap_atomic_prot(page, type, kmap_prot);
-}
-
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
-        unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-        enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
-        if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-                pagefault_enable();
-                return;
-        }
-
-        BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
-        /*
-         * force other mappings to Oops if they'll try to access
-         * this pte without first remap it
-         */
-        pte_clear(&init_mm, vaddr, kmap_pte-idx);
-        flush_tlb_page(NULL, vaddr);
-#endif
-        pagefault_enable();
-}
-
-static inline struct page *kmap_atomic_to_page(void *ptr)
-{
-        unsigned long idx, vaddr = (unsigned long) ptr;
-        pte_t *pte;
-
-        if (vaddr < FIXADDR_START)
-                return virt_to_page(ptr);
-
-        idx = virt_to_fix(vaddr);
-        pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-        return pte_page(*pte);
-}
-
-#define flush_cache_kmaps()     flush_cache_all()
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
deleted file mode 100644
index 26f0d0ab27a5..000000000000
--- a/include/asm-powerpc/hugetlb.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _ASM_POWERPC_HUGETLB_H
-#define _ASM_POWERPC_HUGETLB_H
-
-#include <asm/page.h>
-
-
-int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
-                           unsigned long len);
-
-void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
-                            unsigned long end, unsigned long floor,
-                            unsigned long ceiling);
-
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-                     pte_t *ptep, pte_t pte);
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-                              pte_t *ptep);
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-static inline int prepare_hugepage_range(struct file *file,
-                        unsigned long addr, unsigned long len)
-{
-        struct hstate *h = hstate_file(file);
-        if (len & ~huge_page_mask(h))
-                return -EINVAL;
-        if (addr & ~huge_page_mask(h))
-                return -EINVAL;
-        return 0;
-}
-
-static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
-{
-}
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-                                         unsigned long addr, pte_t *ptep)
-{
-}
-
-static inline int huge_pte_none(pte_t pte)
-{
-        return pte_none(pte);
-}
-
-static inline pte_t huge_pte_wrprotect(pte_t pte)
-{
-        return pte_wrprotect(pte);
-}
-
-static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
-                                             unsigned long addr, pte_t *ptep,
-                                             pte_t pte, int dirty)
-{
-        return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
-}
-
-static inline pte_t huge_ptep_get(pte_t *ptep)
-{
-        return *ptep;
-}
-
-static inline int arch_prepare_hugepage(struct page *page)
-{
-        return 0;
-}
-
-static inline void arch_release_hugepage(struct page *page)
-{
-}
-
-#endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
deleted file mode 100644
index fbe2932fa9e9..000000000000
--- a/include/asm-powerpc/hvcall.h
+++ /dev/null
@@ -1,296 +0,0 @@
-#ifndef _ASM_POWERPC_HVCALL_H
-#define _ASM_POWERPC_HVCALL_H
-#ifdef __KERNEL__
-
-#define HVSC                    .long 0x44000022
-
-#define H_SUCCESS       0
-#define H_BUSY          1       /* Hardware busy -- retry later */
-#define H_CLOSED        2       /* Resource closed */
-#define H_NOT_AVAILABLE 3
-#define H_CONSTRAINED   4       /* Resource request constrained to max allowed */
-#define H_PARTIAL       5
-#define H_IN_PROGRESS   14      /* Kind of like busy */
-#define H_PAGE_REGISTERED 15
-#define H_PARTIAL_STORE   16
-#define H_PENDING       17      /* returned from H_POLL_PENDING */
-#define H_CONTINUE      18      /* Returned from H_Join on success */
-#define H_LONG_BUSY_START_RANGE         9900  /* Start of long busy range */
-#define H_LONG_BUSY_ORDER_1_MSEC        9900  /* Long busy, hint that 1msec \
-                                                 is a good time to retry */
-#define H_LONG_BUSY_ORDER_10_MSEC       9901  /* Long busy, hint that 10msec \
-                                                 is a good time to retry */
-#define H_LONG_BUSY_ORDER_100_MSEC      9902  /* Long busy, hint that 100msec \
-                                                 is a good time to retry */
-#define H_LONG_BUSY_ORDER_1_SEC         9903  /* Long busy, hint that 1sec \
-                                                 is a good time to retry */
-#define H_LONG_BUSY_ORDER_10_SEC        9904  /* Long busy, hint that 10sec \
-                                                 is a good time to retry */
-#define H_LONG_BUSY_ORDER_100_SEC       9905  /* Long busy, hint that 100sec \
-                                                 is a good time to retry */
-#define H_LONG_BUSY_END_RANGE           9905  /* End of long busy range */
-#define H_HARDWARE      -1      /* Hardware error */
-#define H_FUNCTION      -2      /* Function not supported */
-#define H_PRIVILEGE     -3      /* Caller not privileged */
-#define H_PARAMETER     -4      /* Parameter invalid, out-of-range or conflicting */
-#define H_BAD_MODE      -5      /* Illegal msr value */
-#define H_PTEG_FULL     -6      /* PTEG is full */
-#define H_NOT_FOUND     -7      /* PTE was not found" */
-#define H_RESERVED_DABR -8      /* DABR address is reserved by the hypervisor on this processor" */
-#define H_NO_MEM        -9
-#define H_AUTHORITY     -10
-#define H_PERMISSION    -11
-#define H_DROPPED       -12
-#define H_SOURCE_PARM   -13
-#define H_DEST_PARM     -14
-#define H_REMOTE_PARM   -15
-#define H_RESOURCE      -16
-#define H_ADAPTER_PARM  -17
-#define H_RH_PARM       -18
-#define H_RCQ_PARM      -19
-#define H_SCQ_PARM      -20
-#define H_EQ_PARM       -21
-#define H_RT_PARM       -22
-#define H_ST_PARM       -23
-#define H_SIGT_PARM     -24
-#define H_TOKEN_PARM    -25
-#define H_MLENGTH_PARM  -27
-#define H_MEM_PARM      -28
-#define H_MEM_ACCESS_PARM -29
-#define H_ATTR_PARM     -30
-#define H_PORT_PARM     -31
-#define H_MCG_PARM      -32
-#define H_VL_PARM       -33
-#define H_TSIZE_PARM    -34
-#define H_TRACE_PARM    -35
-
-#define H_MASK_PARM     -37
-#define H_MCG_FULL      -38
-#define H_ALIAS_EXIST   -39
-#define H_P_COUNTER     -40
-#define H_TABLE_FULL    -41
-#define H_ALT_TABLE     -42
-#define H_MR_CONDITION  -43
-#define H_NOT_ENOUGH_RESOURCES -44
-#define H_R_STATE       -45
-#define H_RESCINDEND    -46
-
-
-/* Long Busy is a condition that can be returned by the firmware
- * when a call cannot be completed now, but the identical call
- * should be retried later.  This prevents calls blocking in the
- * firmware for long periods of time.  Annoyingly the firmware can return
- * a range of return codes, hinting at how long we should wait before
- * retrying.  If you don't care for the hint, the macro below is a good
- * way to check for the long_busy return codes
- */
-#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
-                             && (x <= H_LONG_BUSY_END_RANGE))
-
-/* Flags */
-#define H_LARGE_PAGE            (1UL<<(63-16))
-#define H_EXACT                 (1UL<<(63-24))  /* Use exact PTE or return H_PTEG_FULL */
-#define H_R_XLATE               (1UL<<(63-25))  /* include a valid logical page num in the pte if the valid bit is set */
-#define H_READ_4                (1UL<<(63-26))  /* Return 4 PTEs */
-#define H_PAGE_STATE_CHANGE     (1UL<<(63-28))
-#define H_PAGE_UNUSED           ((1UL<<(63-29)) | (1UL<<(63-30)))
-#define H_PAGE_SET_UNUSED       (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
-#define H_PAGE_SET_LOANED       (H_PAGE_SET_UNUSED | (1UL<<(63-31)))
-#define H_PAGE_SET_ACTIVE       H_PAGE_STATE_CHANGE
-#define H_AVPN                  (1UL<<(63-32))  /* An avpn is provided as a sanity test */
-#define H_ANDCOND               (1UL<<(63-33))
-#define H_ICACHE_INVALIDATE     (1UL<<(63-40))  /* icbi, etc.  (ignored for IO pages) */
-#define H_ICACHE_SYNCHRONIZE    (1UL<<(63-41))  /* dcbst, icbi, etc (ignored for IO pages */
-#define H_ZERO_PAGE             (1UL<<(63-48))  /* zero the page before mapping (ignored for IO pages) */
-#define H_COPY_PAGE             (1UL<<(63-49))
-#define H_N                     (1UL<<(63-61))
-#define H_PP1                   (1UL<<(63-62))
-#define H_PP2                   (1UL<<(63-63))
-
-/* VASI States */
-#define H_VASI_INVALID          0
-#define H_VASI_ENABLED          1
-#define H_VASI_ABORTED          2
-#define H_VASI_SUSPENDING       3
-#define H_VASI_SUSPENDED        4
-#define H_VASI_RESUMED          5
-#define H_VASI_COMPLETED        6
-
-/* DABRX flags */
-#define H_DABRX_HYPERVISOR      (1UL<<(63-61))
-#define H_DABRX_KERNEL          (1UL<<(63-62))
-#define H_DABRX_USER            (1UL<<(63-63))
-
-/* Each control block has to be on a 4K bondary */
-#define H_CB_ALIGNMENT          4096
-
-/* pSeries hypervisor opcodes */
-#define H_REMOVE                0x04
-#define H_ENTER                 0x08
-#define H_READ                  0x0c
-#define H_CLEAR_MOD             0x10
-#define H_CLEAR_REF             0x14
-#define H_PROTECT               0x18
-#define H_GET_TCE               0x1c
-#define H_PUT_TCE               0x20
-#define H_SET_SPRG0             0x24
-#define H_SET_DABR              0x28
-#define H_PAGE_INIT             0x2c
-#define H_SET_ASR               0x30
-#define H_ASR_ON                0x34
-#define H_ASR_OFF               0x38
-#define H_LOGICAL_CI_LOAD       0x3c
-#define H_LOGICAL_CI_STORE      0x40
-#define H_LOGICAL_CACHE_LOAD    0x44
-#define H_LOGICAL_CACHE_STORE   0x48
-#define H_LOGICAL_ICBI          0x4c
-#define H_LOGICAL_DCBF          0x50
-#define H_GET_TERM_CHAR         0x54
-#define H_PUT_TERM_CHAR         0x58
-#define H_REAL_TO_LOGICAL       0x5c
-#define H_HYPERVISOR_DATA       0x60
-#define H_EOI                   0x64
-#define H_CPPR                  0x68
-#define H_IPI                   0x6c
-#define H_IPOLL                 0x70
-#define H_XIRR                  0x74
-#define H_PERFMON               0x7c
-#define H_MIGRATE_DMA           0x78
-#define H_REGISTER_VPA          0xDC
-#define H_CEDE                  0xE0
-#define H_CONFER                0xE4
-#define H_PROD                  0xE8
-#define H_GET_PPP               0xEC
-#define H_SET_PPP               0xF0
-#define H_PURR                  0xF4
-#define H_PIC                   0xF8
-#define H_REG_CRQ               0xFC
-#define H_FREE_CRQ              0x100
-#define H_VIO_SIGNAL            0x104
-#define H_SEND_CRQ              0x108
-#define H_COPY_RDMA             0x110
-#define H_REGISTER_LOGICAL_LAN  0x114
-#define H_FREE_LOGICAL_LAN      0x118
-#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
-#define H_SEND_LOGICAL_LAN      0x120
-#define H_BULK_REMOVE           0x124
-#define H_MULTICAST_CTRL        0x130
-#define H_SET_XDABR             0x134
-#define H_STUFF_TCE             0x138
-#define H_PUT_TCE_INDIRECT      0x13C
-#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
-#define H_VTERM_PARTNER_INFO    0x150
-#define H_REGISTER_VTERM        0x154
-#define H_FREE_VTERM            0x158
-#define H_RESET_EVENTS          0x15C
-#define H_ALLOC_RESOURCE        0x160
-#define H_FREE_RESOURCE         0x164
-#define H_MODIFY_QP             0x168
-#define H_QUERY_QP              0x16C
-#define H_REREGISTER_PMR        0x170
-#define H_REGISTER_SMR          0x174
-#define H_QUERY_MR              0x178
-#define H_QUERY_MW              0x17C
-#define H_QUERY_HCA             0x180
-#define H_QUERY_PORT            0x184
-#define H_MODIFY_PORT           0x188
-#define H_DEFINE_AQP1           0x18C
-#define H_GET_TRACE_BUFFER      0x190
-#define H_DEFINE_AQP0           0x194
-#define H_RESIZE_MR             0x198
-#define H_ATTACH_MCQP           0x19C
-#define H_DETACH_MCQP           0x1A0
-#define H_CREATE_RPT            0x1A4
-#define H_REMOVE_RPT            0x1A8
-#define H_REGISTER_RPAGES       0x1AC
-#define H_DISABLE_AND_GETC      0x1B0
-#define H_ERROR_DATA            0x1B4
-#define H_GET_HCA_INFO          0x1B8
-#define H_GET_PERF_COUNT        0x1BC
-#define H_MANAGE_TRACE          0x1C0
-#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
-#define H_QUERY_INT_STATE       0x1E4
-#define H_POLL_PENDING          0x1D8
-#define H_ILLAN_ATTRIBUTES      0x244
-#define H_JOIN                  0x298
-#define H_VASI_STATE            0x2A4
-#define H_ENABLE_CRQ            0x2B0
-#define H_SET_MPP               0x2D0
-#define H_GET_MPP               0x2D4
-#define MAX_HCALL_OPCODE        H_GET_MPP
-
-#ifndef __ASSEMBLY__
-
-/**
- * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
- * @opcode: The hypervisor call to make.
- *
- * This call supports up to 7 arguments and only returns the status of
- * the hcall. Use this version where possible, its slightly faster than
- * the other plpar_hcalls.
- */
-long plpar_hcall_norets(unsigned long opcode, ...);
-
-/**
- * plpar_hcall: - Make a pseries hypervisor call
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 4 return arguments in.
- *
- * This call supports up to 6 arguments and 4 return arguments. Use
- * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
- *
- * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
- */
-#define PLPAR_HCALL_BUFSIZE 4
-long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
-
-/**
- * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 4 return arguments in.
- *
- * This call supports up to 6 arguments and 4 return arguments. Use
- * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
- *
- * Used when phyp interface needs to be called in real mode. Similar to
- * plpar_hcall, but plpar_hcall_raw works in real mode and does not
- * calculate hypervisor call statistics.
- */
-long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
-
-/**
- * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 9 return arguments in.
- *
- * This call supports up to 9 arguments and 9 return arguments. Use
- * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
- */
-#define PLPAR_HCALL9_BUFSIZE 9
-long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
-
-/* For hcall instrumentation.  One structure per-hcall, per-CPU */
-struct hcall_stats {
-        unsigned long   num_calls;      /* number of calls (on this CPU) */
-        unsigned long   tb_total;       /* total wall time (mftb) of calls. */
-        unsigned long   purr_total;     /* total cpu time (PURR) of calls. */
-};
-#define HCALL_STAT_ARRAY_SIZE   ((MAX_HCALL_OPCODE >> 2) + 1)
-
-struct hvcall_mpp_data {
-        unsigned long entitled_mem;
-        unsigned long mapped_mem;
-        unsigned short group_num;
-        unsigned short pool_num;
-        unsigned char mem_weight;
-        unsigned char unallocated_mem_weight;
-        unsigned long unallocated_entitlement;  /* value in bytes */
-        unsigned long pool_size;
-        signed long loan_request;
-        unsigned long backing_mem;
-};
-
-int h_get_mpp(struct hvcall_mpp_data *);
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/include/asm-powerpc/hvconsole.h b/include/asm-powerpc/hvconsole.h
deleted file mode 100644
index 35ea69e8121f..000000000000
--- a/include/asm-powerpc/hvconsole.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * hvconsole.h
- * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
- *
- * LPAR console support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _PPC64_HVCONSOLE_H
-#define _PPC64_HVCONSOLE_H
-#ifdef __KERNEL__
-
-/*
- * PSeries firmware will only send/recv up to 16 bytes of character data per
- * hcall.
- */
-#define MAX_VIO_PUT_CHARS       16
-#define SIZE_VIO_GET_CHARS      16
-
-/*
- * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars.  The 'count'
- * parm is included to conform to put_chars() function pointer template
- */
-extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
-extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_HVCONSOLE_H */
diff --git a/include/asm-powerpc/hvcserver.h b/include/asm-powerpc/hvcserver.h
deleted file mode 100644
index 67d7da3a4da4..000000000000
--- a/include/asm-powerpc/hvcserver.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * hvcserver.h
- * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
- *
- * PPC64 virtual I/O console server support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _PPC64_HVCSERVER_H
-#define _PPC64_HVCSERVER_H
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-
-/* Converged Location Code length */
-#define HVCS_CLC_LENGTH 79
-
-/**
- * hvcs_partner_info - an element in a list of partner info
- * @node: list_head denoting this partner_info struct's position in the list of
- *      partner info.
- * @unit_address: The partner unit address of this entry.
- * @partition_ID: The partner partition ID of this entry.
- * @location_code: The converged location code of this entry + 1 char for the
- *      null-term.
- *
- * This structure outlines the format that partner info is presented to a caller
- * of the hvcs partner info fetching functions.  These are strung together into
- * a list using linux kernel lists.
- */
-struct hvcs_partner_info {
-        struct list_head node;
-        uint32_t unit_address;
-        uint32_t partition_ID;
-        char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */
-};
-
-extern int hvcs_free_partner_info(struct list_head *head);
-extern int hvcs_get_partner_info(uint32_t unit_address,
-                struct list_head *head, unsigned long *pi_buff);
-extern int hvcs_register_connection(uint32_t unit_address,
-                uint32_t p_partition_ID, uint32_t p_unit_address);
-extern int hvcs_free_connection(uint32_t unit_address);
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_HVCSERVER_H */
diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h
deleted file mode 100644
index f75a5fc64d2e..000000000000
--- a/include/asm-powerpc/hw_irq.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- */
-#ifndef _ASM_POWERPC_HW_IRQ_H
-#define _ASM_POWERPC_HW_IRQ_H
-
-#ifdef __KERNEL__
-
-#include <linux/errno.h>
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-
-extern void timer_interrupt(struct pt_regs *);
-
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-
-static inline unsigned long local_get_flags(void)
-{
-        unsigned long flags;
-
-        __asm__ __volatile__("lbz %0,%1(13)"
-        : "=r" (flags)
-        : "i" (offsetof(struct paca_struct, soft_enabled)));
-
-        return flags;
-}
-
-static inline unsigned long raw_local_irq_disable(void)
-{
-        unsigned long flags, zero;
-
-        __asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)"
-        : "=r" (flags), "=&r" (zero)
-        : "i" (offsetof(struct paca_struct, soft_enabled))
-        : "memory");
-
-        return flags;
-}
-
-extern void raw_local_irq_restore(unsigned long);
-extern void iseries_handle_interrupts(void);
-
-#define raw_local_irq_enable()          raw_local_irq_restore(1)
-#define raw_local_save_flags(flags)     ((flags) = local_get_flags())
-#define raw_local_irq_save(flags)       ((flags) = raw_local_irq_disable())
-
-#define raw_irqs_disabled()             (local_get_flags() == 0)
-#define raw_irqs_disabled_flags(flags)  ((flags) == 0)
-
-#define __hard_irq_enable()     __mtmsrd(mfmsr() | MSR_EE, 1)
-#define __hard_irq_disable()    __mtmsrd(mfmsr() & ~MSR_EE, 1)
-
-#define  hard_irq_disable()                     \
-        do {                                    \
-                __hard_irq_disable();           \
-                get_paca()->soft_enabled = 0;   \
-                get_paca()->hard_enabled = 0;   \
-        } while(0)
-
-static inline int irqs_disabled_flags(unsigned long flags)
-{
-        return flags == 0;
-}
-
-#else
-
-#if defined(CONFIG_BOOKE)
-#define SET_MSR_EE(x)   mtmsr(x)
-#define local_irq_restore(flags)        __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
-#else
-#define SET_MSR_EE(x)   mtmsr(x)
-#define local_irq_restore(flags)        mtmsr(flags)
-#endif
-
-static inline void local_irq_disable(void)
-{
-#ifdef CONFIG_BOOKE
-        __asm__ __volatile__("wrteei 0": : :"memory");
-#else
-        unsigned long msr;
-        __asm__ __volatile__("": : :"memory");
-        msr = mfmsr();
-        SET_MSR_EE(msr & ~MSR_EE);
-#endif
-}
-
-static inline void local_irq_enable(void)
-{
-#ifdef CONFIG_BOOKE
-        __asm__ __volatile__("wrteei 1": : :"memory");
-#else
-        unsigned long msr;
-        __asm__ __volatile__("": : :"memory");
-        msr = mfmsr();
-        SET_MSR_EE(msr | MSR_EE);
-#endif
-}
-
-static inline void local_irq_save_ptr(unsigned long *flags)
-{
-        unsigned long msr;
-        msr = mfmsr();
-        *flags = msr;
-#ifdef CONFIG_BOOKE
-        __asm__ __volatile__("wrteei 0": : :"memory");
-#else
-        SET_MSR_EE(msr & ~MSR_EE);
-#endif
-        __asm__ __volatile__("": : :"memory");
-}
-
-#define local_save_flags(flags) ((flags) = mfmsr())
-#define local_irq_save(flags)   local_irq_save_ptr(&flags)
-#define irqs_disabled()         ((mfmsr() & MSR_EE) == 0)
-
-#define hard_irq_enable()       local_irq_enable()
-#define hard_irq_disable()      local_irq_disable()
-
-static inline int irqs_disabled_flags(unsigned long flags)
-{
-        return (flags & MSR_EE) == 0;
-}
-
-#endif /* CONFIG_PPC64 */
-
-/*
- * interrupt-retrigger: should we handle this via lost interrupts and IPIs
- * or should we not care like we do now ? --BenH.
- */
-struct hw_interrupt_type;
-
-#endif  /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_HW_IRQ_H */
diff --git a/include/asm-powerpc/hydra.h b/include/asm-powerpc/hydra.h
deleted file mode 100644
index 1ad4eed07fbe..000000000000
--- a/include/asm-powerpc/hydra.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
- *
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is based on the following documentation:
- *
- *      Macintosh Technology in the Common Hardware Reference Platform
- *      Apple Computer, Inc.
- *
- *      © Copyright 1995 Apple Computer, Inc. All rights reserved.
- *
- *  It's available online from http://chrp.apple.com/MacTech.pdf.
- *  You can obtain paper copies of this book from computer bookstores or by
- *  writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
- *  Francisco, CA 94104. Reference ISBN 1-55860-393-X.
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#ifndef _ASMPPC_HYDRA_H
-#define _ASMPPC_HYDRA_H
-
-#ifdef __KERNEL__
-
-struct Hydra {
-    /* DBDMA Controller Register Space */
-    char Pad1[0x30];
-    u_int CachePD;
-    u_int IDs;
-    u_int Feature_Control;
-    char Pad2[0x7fc4];
-    /* DBDMA Channel Register Space */
-    char SCSI_DMA[0x100];
-    char Pad3[0x300];
-    char SCCA_Tx_DMA[0x100];
-    char SCCA_Rx_DMA[0x100];
-    char SCCB_Tx_DMA[0x100];
-    char SCCB_Rx_DMA[0x100];
-    char Pad4[0x7800];
-    /* Device Register Space */
-    char SCSI[0x1000];
-    char ADB[0x1000];
-    char SCC_Legacy[0x1000];
-    char SCC[0x1000];
-    char Pad9[0x2000];
-    char VIA[0x2000];
-    char Pad10[0x28000];
-    char OpenPIC[0x40000];
-};
-
-extern volatile struct Hydra __iomem *Hydra;
-
-
-    /*
-     *  Feature Control Register
-     */
-
-#define HYDRA_FC_SCC_CELL_EN    0x00000001      /* Enable SCC Clock */
-#define HYDRA_FC_SCSI_CELL_EN   0x00000002      /* Enable SCSI Clock */
-#define HYDRA_FC_SCCA_ENABLE    0x00000004      /* Enable SCC A Lines */
-#define HYDRA_FC_SCCB_ENABLE    0x00000008      /* Enable SCC B Lines */
-#define HYDRA_FC_ARB_BYPASS     0x00000010      /* Bypass Internal Arbiter */
-#define HYDRA_FC_RESET_SCC      0x00000020      /* Reset SCC */
-#define HYDRA_FC_MPIC_ENABLE    0x00000040      /* Enable OpenPIC */
-#define HYDRA_FC_SLOW_SCC_PCLK  0x00000080      /* 1=15.6672, 0=25 MHz */
-#define HYDRA_FC_MPIC_IS_MASTER 0x00000100      /* OpenPIC Master Mode */
-
-
-    /*
-     *  OpenPIC Interrupt Sources
-     */
-
-#define HYDRA_INT_SIO           0
-#define HYDRA_INT_SCSI_DMA      1
-#define HYDRA_INT_SCCA_TX_DMA   2
-#define HYDRA_INT_SCCA_RX_DMA   3
-#define HYDRA_INT_SCCB_TX_DMA   4
-#define HYDRA_INT_SCCB_RX_DMA   5
-#define HYDRA_INT_SCSI          6
-#define HYDRA_INT_SCCA          7
-#define HYDRA_INT_SCCB          8
-#define HYDRA_INT_VIA           9
-#define HYDRA_INT_ADB           10
-#define HYDRA_INT_ADB_NMI       11
-#define HYDRA_INT_EXT1          12      /* PCI IRQW */
-#define HYDRA_INT_EXT2          13      /* PCI IRQX */
-#define HYDRA_INT_EXT3          14      /* PCI IRQY */
-#define HYDRA_INT_EXT4          15      /* PCI IRQZ */
-#define HYDRA_INT_EXT5          16      /* IDE Primay/Secondary */
-#define HYDRA_INT_EXT6          17      /* IDE Secondary */
-#define HYDRA_INT_EXT7          18      /* Power Off Request */
-#define HYDRA_INT_SPARE         19
-
-extern int hydra_init(void);
-extern void macio_adb_init(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASMPPC_HYDRA_H */
diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h
deleted file mode 100644
index db1362f8c603..000000000000
--- a/include/asm-powerpc/i8259.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_POWERPC_I8259_H
-#define _ASM_POWERPC_I8259_H
-#ifdef __KERNEL__
-
-#include <linux/irq.h>
-
-#ifdef CONFIG_PPC_MERGE
-extern void i8259_init(struct device_node *node, unsigned long intack_addr);
-extern unsigned int i8259_irq(void);
-extern struct irq_host *i8259_get_host(void);
-#else
-extern void i8259_init(unsigned long intack_addr, int offset);
-extern int i8259_irq(void);
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/ibmebus.h b/include/asm-powerpc/ibmebus.h
deleted file mode 100644
index 1a9d9aea21fa..000000000000
--- a/include/asm-powerpc/ibmebus.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * IBM PowerPC eBus Infrastructure Support.
- *
- * Copyright (c) 2005 IBM Corporation
- *  Joachim Fenkes <fenkes@de.ibm.com>
- *  Heiko J Schick <schickhj@de.ibm.com>
- *
- * All rights reserved.
- *
- * This source code is distributed under a dual license of GPL v2.0 and OpenIB
- * BSD.
- *
- * OpenIB BSD License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
- * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_EBUS_H
-#define _ASM_EBUS_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/mod_devicetable.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-
-extern struct bus_type ibmebus_bus_type;
-
-int ibmebus_register_driver(struct of_platform_driver *drv);
-void ibmebus_unregister_driver(struct of_platform_driver *drv);
-
-int ibmebus_request_irq(u32 ist, irq_handler_t handler,
-                        unsigned long irq_flags, const char *devname,
-                        void *dev_id);
-void ibmebus_free_irq(u32 ist, void *dev_id);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_IBMEBUS_H */
diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h
deleted file mode 100644
index 1aaf27be8741..000000000000
--- a/include/asm-powerpc/ide.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  Copyright (C) 1994-1996 Linus Torvalds & authors
- *
- *  This file contains the powerpc architecture specific IDE code.
- */
-#ifndef _ASM_POWERPC_IDE_H
-#define _ASM_POWERPC_IDE_H
-
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <linux/sched.h>
-#include <asm/mpc8xx.h>
-#endif
-#include <asm/io.h>
-
-#define __ide_mm_insw(p, a, c)  readsw((void __iomem *)(p), (a), (c))
-#define __ide_mm_insl(p, a, c)  readsl((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c))
-
-#ifndef  __powerpc64__
-#include <linux/hdreg.h>
-#include <linux/ioport.h>
-
-/* FIXME: use ide_platform host driver */
-static __inline__ int ide_default_irq(unsigned long base)
-{
-#ifdef CONFIG_PPLUS
-        switch (base) {
-        case 0x1f0:     return 14;
-        case 0x170:     return 15;
-        }
-#endif
-        return 0;
-}
-
-/* FIXME: use ide_platform host driver */
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-#ifdef CONFIG_PPLUS
-        switch (index) {
-        case 0:         return 0x1f0;
-        case 1:         return 0x170;
-        }
-#endif
-        return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
-#define IDE_ARCH_ACK_INTR  1
-#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
-#endif
-
-#endif /* __powerpc64__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_IDE_H */
diff --git a/include/asm-powerpc/immap_86xx.h b/include/asm-powerpc/immap_86xx.h
deleted file mode 100644
index 0f165e59c326..000000000000
--- a/include/asm-powerpc/immap_86xx.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/**
- * MPC86xx Internal Memory Map
- *
- * Authors: Jeff Brown
- *          Timur Tabi <timur@freescale.com>
- *
- * Copyright 2004,2007 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This header file defines structures for various 86xx SOC devices that are
- * used by multiple source files.
- */
-
-#ifndef __ASM_POWERPC_IMMAP_86XX_H__
-#define __ASM_POWERPC_IMMAP_86XX_H__
-#ifdef __KERNEL__
-
-/* Global Utility Registers */
-struct ccsr_guts {
-        __be32  porpllsr;       /* 0x.0000 - POR PLL Ratio Status Register */
-        __be32  porbmsr;        /* 0x.0004 - POR Boot Mode Status Register */
-        __be32  porimpscr;      /* 0x.0008 - POR I/O Impedance Status and Control Register */
-        __be32  pordevsr;       /* 0x.000c - POR I/O Device Status Register */
-        __be32  pordbgmsr;      /* 0x.0010 - POR Debug Mode Status Register */
-        u8      res1[0x20 - 0x14];
-        __be32  porcir;         /* 0x.0020 - POR Configuration Information Register */
-        u8      res2[0x30 - 0x24];
-        __be32  gpiocr;         /* 0x.0030 - GPIO Control Register */
-        u8      res3[0x40 - 0x34];
-        __be32  gpoutdr;        /* 0x.0040 - General-Purpose Output Data Register */
-        u8      res4[0x50 - 0x44];
-        __be32  gpindr;         /* 0x.0050 - General-Purpose Input Data Register */
-        u8      res5[0x60 - 0x54];
-        __be32  pmuxcr;         /* 0x.0060 - Alternate Function Signal Multiplex Control */
-        u8      res6[0x70 - 0x64];
-        __be32  devdisr;        /* 0x.0070 - Device Disable Control */
-        __be32  devdisr2;       /* 0x.0074 - Device Disable Control 2 */
-        u8      res7[0x80 - 0x78];
-        __be32  powmgtcsr;      /* 0x.0080 - Power Management Status and Control Register */
-        u8      res8[0x90 - 0x84];
-        __be32  mcpsumr;        /* 0x.0090 - Machine Check Summary Register */
-        __be32  rstrscr;        /* 0x.0094 - Reset Request Status and Control Register */
-        u8      res9[0xA0 - 0x98];
-        __be32  pvr;            /* 0x.00a0 - Processor Version Register */
-        __be32  svr;            /* 0x.00a4 - System Version Register */
-        u8      res10[0xB0 - 0xA8];
-        __be32  rstcr;          /* 0x.00b0 - Reset Control Register */
-        u8      res11[0xC0 - 0xB4];
-        __be32  elbcvselcr;     /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
-        u8      res12[0x800 - 0xC4];
-        __be32  clkdvdr;        /* 0x.0800 - Clock Divide Register */
-        u8      res13[0x900 - 0x804];
-        __be32  ircr;           /* 0x.0900 - Infrared Control Register */
-        u8      res14[0x908 - 0x904];
-        __be32  dmacr;          /* 0x.0908 - DMA Control Register */
-        u8      res15[0x914 - 0x90C];
-        __be32  elbccr;         /* 0x.0914 - eLBC Control Register */
-        u8      res16[0xB20 - 0x918];
-        __be32  ddr1clkdr;      /* 0x.0b20 - DDR1 Clock Disable Register */
-        __be32  ddr2clkdr;      /* 0x.0b24 - DDR2 Clock Disable Register */
-        __be32  ddrclkdr;       /* 0x.0b28 - DDR Clock Disable Register */
-        u8      res17[0xE00 - 0xB2C];
-        __be32  clkocr;         /* 0x.0e00 - Clock Out Select Register */
-        u8      res18[0xE10 - 0xE04];
-        __be32  ddrdllcr;       /* 0x.0e10 - DDR DLL Control Register */
-        u8      res19[0xE20 - 0xE14];
-        __be32  lbcdllcr;       /* 0x.0e20 - LBC DLL Control Register */
-        u8      res20[0xF04 - 0xE24];
-        __be32  srds1cr0;       /* 0x.0f04 - SerDes1 Control Register 0 */
-        __be32  srds1cr1;       /* 0x.0f08 - SerDes1 Control Register 0 */
-        u8      res21[0xF40 - 0xF0C];
-        __be32  srds2cr0;       /* 0x.0f40 - SerDes1 Control Register 0 */
-        __be32  srds2cr1;       /* 0x.0f44 - SerDes1 Control Register 0 */
-} __attribute__ ((packed));
-
-#define CCSR_GUTS_DMACR_DEV_SSI 0       /* DMA controller/channel set to SSI */
-#define CCSR_GUTS_DMACR_DEV_IR  1       /* DMA controller/channel set to IR */
-
-/*
- * Set the DMACR register in the GUTS
- *
- * The DMACR register determines the source of initiated transfers for each
- * channel on each DMA controller.  Rather than have a bunch of repetitive
- * macros for the bit patterns, we just have a function that calculates
- * them.
- *
- * guts: Pointer to GUTS structure
- * co: The DMA controller (0 or 1)
- * ch: The channel on the DMA controller (0, 1, 2, or 3)
- * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
- */
-static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
-        unsigned int co, unsigned int ch, unsigned int device)
-{
-        unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
-
-        clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
-}
-
-#define CCSR_GUTS_PMUXCR_LDPSEL         0x00010000
-#define CCSR_GUTS_PMUXCR_SSI1_MASK      0x0000C000      /* Bitmask for SSI1 */
-#define CCSR_GUTS_PMUXCR_SSI1_LA        0x00000000      /* Latched address */
-#define CCSR_GUTS_PMUXCR_SSI1_HI        0x00004000      /* High impedance */
-#define CCSR_GUTS_PMUXCR_SSI1_SSI       0x00008000      /* Used for SSI1 */
-#define CCSR_GUTS_PMUXCR_SSI2_MASK      0x00003000      /* Bitmask for SSI2 */
-#define CCSR_GUTS_PMUXCR_SSI2_LA        0x00000000      /* Latched address */
-#define CCSR_GUTS_PMUXCR_SSI2_HI        0x00001000      /* High impedance */
-#define CCSR_GUTS_PMUXCR_SSI2_SSI       0x00002000      /* Used for SSI2 */
-#define CCSR_GUTS_PMUXCR_LA_22_25_LA    0x00000000      /* Latched Address */
-#define CCSR_GUTS_PMUXCR_LA_22_25_HI    0x00000400      /* High impedance */
-#define CCSR_GUTS_PMUXCR_DBGDRV         0x00000200      /* Signals not driven */
-#define CCSR_GUTS_PMUXCR_DMA2_0         0x00000008
-#define CCSR_GUTS_PMUXCR_DMA2_3         0x00000004
-#define CCSR_GUTS_PMUXCR_DMA1_0         0x00000002
-#define CCSR_GUTS_PMUXCR_DMA1_3         0x00000001
-
-/*
- * Set the DMA external control bits in the GUTS
- *
- * The DMA external control bits in the PMUXCR are only meaningful for
- * channels 0 and 3.  Any other channels are ignored.
- *
- * guts: Pointer to GUTS structure
- * co: The DMA controller (0 or 1)
- * ch: The channel on the DMA controller (0, 1, 2, or 3)
- * value: the new value for the bit (0 or 1)
- */
-static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
-        unsigned int co, unsigned int ch, unsigned int value)
-{
-        if ((ch == 0) || (ch == 3)) {
-                unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
-
-                clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
-        }
-}
-
-#define CCSR_GUTS_CLKDVDR_PXCKEN        0x80000000
-#define CCSR_GUTS_CLKDVDR_SSICKEN       0x20000000
-#define CCSR_GUTS_CLKDVDR_PXCKINV       0x10000000
-#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
-#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK  0x06000000
-#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
-        (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
-#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT   16
-#define CCSR_GUTS_CLKDVDR_PXCLK_MASK    0x001F0000
-#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
-#define CCSR_GUTS_CLKDVDR_SSICLK_MASK   0x000000FF
-#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
-
-#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/immap_cpm2.h b/include/asm-powerpc/immap_cpm2.h
deleted file mode 100644
index 4080bab0468c..000000000000
--- a/include/asm-powerpc/immap_cpm2.h
+++ /dev/null
@@ -1,650 +0,0 @@
-/*
- * CPM2 Internal Memory Map
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- *
- * The Internal Memory Map for devices with CPM2 on them.  This
- * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
- * 8560).
- */
-#ifdef __KERNEL__
-#ifndef __IMMAP_CPM2__
-#define __IMMAP_CPM2__
-
-#include <linux/types.h>
-
-/* System configuration registers.
-*/
-typedef struct sys_82xx_conf {
-        u32     sc_siumcr;
-        u32     sc_sypcr;
-        u8      res1[6];
-        u16     sc_swsr;
-        u8      res2[20];
-        u32     sc_bcr;
-        u8      sc_ppc_acr;
-        u8      res3[3];
-        u32     sc_ppc_alrh;
-        u32     sc_ppc_alrl;
-        u8      sc_lcl_acr;
-        u8      res4[3];
-        u32     sc_lcl_alrh;
-        u32     sc_lcl_alrl;
-        u32     sc_tescr1;
-        u32     sc_tescr2;
-        u32     sc_ltescr1;
-        u32     sc_ltescr2;
-        u32     sc_pdtea;
-        u8      sc_pdtem;
-        u8      res5[3];
-        u32     sc_ldtea;
-        u8      sc_ldtem;
-        u8      res6[163];
-} sysconf_82xx_cpm2_t;
-
-typedef struct sys_85xx_conf {
-        u32     sc_cear;
-        u16     sc_ceer;
-        u16     sc_cemr;
-        u8      res1[70];
-        u32     sc_smaer;
-        u8      res2[4];
-        u32     sc_smevr;
-        u32     sc_smctr;
-        u32     sc_lmaer;
-        u8      res3[4];
-        u32     sc_lmevr;
-        u32     sc_lmctr;
-        u8      res4[144];
-} sysconf_85xx_cpm2_t;
-
-typedef union sys_conf {
-        sysconf_82xx_cpm2_t     siu_82xx;
-        sysconf_85xx_cpm2_t     siu_85xx;
-} sysconf_cpm2_t;
-
-
-
-/* Memory controller registers.
-*/
-typedef struct  mem_ctlr {
-        u32     memc_br0;
-        u32     memc_or0;
-        u32     memc_br1;
-        u32     memc_or1;
-        u32     memc_br2;
-        u32     memc_or2;
-        u32     memc_br3;
-        u32     memc_or3;
-        u32     memc_br4;
-        u32     memc_or4;
-        u32     memc_br5;
-        u32     memc_or5;
-        u32     memc_br6;
-        u32     memc_or6;
-        u32     memc_br7;
-        u32     memc_or7;
-        u32     memc_br8;
-        u32     memc_or8;
-        u32     memc_br9;
-        u32     memc_or9;
-        u32     memc_br10;
-        u32     memc_or10;
-        u32     memc_br11;
-        u32     memc_or11;
-        u8      res1[8];
-        u32     memc_mar;
-        u8      res2[4];
-        u32     memc_mamr;
-        u32     memc_mbmr;
-        u32     memc_mcmr;
-        u8      res3[8];
-        u16     memc_mptpr;
-        u8      res4[2];
-        u32     memc_mdr;
-        u8      res5[4];
-        u32     memc_psdmr;
-        u32     memc_lsdmr;
-        u8      memc_purt;
-        u8      res6[3];
-        u8      memc_psrt;
-        u8      res7[3];
-        u8      memc_lurt;
-        u8      res8[3];
-        u8      memc_lsrt;
-        u8      res9[3];
-        u32     memc_immr;
-        u32     memc_pcibr0;
-        u32     memc_pcibr1;
-        u8      res10[16];
-        u32     memc_pcimsk0;
-        u32     memc_pcimsk1;
-        u8      res11[52];
-} memctl_cpm2_t;
-
-/* System Integration Timers.
-*/
-typedef struct  sys_int_timers {
-        u8      res1[32];
-        u16     sit_tmcntsc;
-        u8      res2[2];
-        u32     sit_tmcnt;
-        u8      res3[4];
-        u32     sit_tmcntal;
-        u8      res4[16];
-        u16     sit_piscr;
-        u8      res5[2];
-        u32     sit_pitc;
-        u32     sit_pitr;
-        u8      res6[94];
-        u8      res7[390];
-} sit_cpm2_t;
-
-#define PISCR_PIRQ_MASK         ((u16)0xff00)
-#define PISCR_PS                ((u16)0x0080)
-#define PISCR_PIE               ((u16)0x0004)
-#define PISCR_PTF               ((u16)0x0002)
-#define PISCR_PTE               ((u16)0x0001)
-
-/* PCI Controller.
-*/
-typedef struct pci_ctlr {
-        u32     pci_omisr;
-        u32     pci_omimr;
-        u8      res1[8];
-        u32     pci_ifqpr;
-        u32     pci_ofqpr;
-        u8      res2[8];
-        u32     pci_imr0;
-        u32     pci_imr1;
-        u32     pci_omr0;
-        u32     pci_omr1;
-        u32     pci_odr;
-        u8      res3[4];
-        u32     pci_idr;
-        u8      res4[20];
-        u32     pci_imisr;
-        u32     pci_imimr;
-        u8      res5[24];
-        u32     pci_ifhpr;
-        u8      res6[4];
-        u32     pci_iftpr;
-        u8      res7[4];
-        u32     pci_iphpr;
-        u8      res8[4];
-        u32     pci_iptpr;
-        u8      res9[4];
-        u32     pci_ofhpr;
-        u8      res10[4];
-        u32     pci_oftpr;
-        u8      res11[4];
-        u32     pci_ophpr;
-        u8      res12[4];
-        u32     pci_optpr;
-        u8      res13[8];
-        u32     pci_mucr;
-        u8      res14[8];
-        u32     pci_qbar;
-        u8      res15[12];
-        u32     pci_dmamr0;
-        u32     pci_dmasr0;
-        u32     pci_dmacdar0;
-        u8      res16[4];
-        u32     pci_dmasar0;
-        u8      res17[4];
-        u32     pci_dmadar0;
-        u8      res18[4];
-        u32     pci_dmabcr0;
-        u32     pci_dmandar0;
-        u8      res19[86];
-        u32     pci_dmamr1;
-        u32     pci_dmasr1;
-        u32     pci_dmacdar1;
-        u8      res20[4];
-        u32     pci_dmasar1;
-        u8      res21[4];
-        u32     pci_dmadar1;
-        u8      res22[4];
-        u32     pci_dmabcr1;
-        u32     pci_dmandar1;
-        u8      res23[88];
-        u32     pci_dmamr2;
-        u32     pci_dmasr2;
-        u32     pci_dmacdar2;
-        u8      res24[4];
-        u32     pci_dmasar2;
-        u8      res25[4];
-        u32     pci_dmadar2;
-        u8      res26[4];
-        u32     pci_dmabcr2;
-        u32     pci_dmandar2;
-        u8      res27[88];
-        u32     pci_dmamr3;
-        u32     pci_dmasr3;
-        u32     pci_dmacdar3;
-        u8      res28[4];
-        u32     pci_dmasar3;
-        u8      res29[4];
-        u32     pci_dmadar3;
-        u8      res30[4];
-        u32     pci_dmabcr3;
-        u32     pci_dmandar3;
-        u8      res31[344];
-        u32     pci_potar0;
-        u8      res32[4];
-        u32     pci_pobar0;
-        u8      res33[4];
-        u32     pci_pocmr0;
-        u8      res34[4];
-        u32     pci_potar1;
-        u8      res35[4];
-        u32     pci_pobar1;
-        u8      res36[4];
-        u32     pci_pocmr1;
-        u8      res37[4];
-        u32     pci_potar2;
-        u8      res38[4];
-        u32     pci_pobar2;
-        u8      res39[4];
-        u32     pci_pocmr2;
-        u8      res40[50];
-        u32     pci_ptcr;
-        u32     pci_gpcr;
-        u32     pci_gcr;
-        u32     pci_esr;
-        u32     pci_emr;
-        u32     pci_ecr;
-        u32     pci_eacr;
-        u8      res41[4];
-        u32     pci_edcr;
-        u8      res42[4];
-        u32     pci_eccr;
-        u8      res43[44];
-        u32     pci_pitar1;
-        u8      res44[4];
-        u32     pci_pibar1;
-        u8      res45[4];
-        u32     pci_picmr1;
-        u8      res46[4];
-        u32     pci_pitar0;
-        u8      res47[4];
-        u32     pci_pibar0;
-        u8      res48[4];
-        u32     pci_picmr0;
-        u8      res49[4];
-        u32     pci_cfg_addr;
-        u32     pci_cfg_data;
-        u32     pci_int_ack;
-        u8      res50[756];
-} pci_cpm2_t;
-
-/* Interrupt Controller.
-*/
-typedef struct interrupt_controller {
-        u16     ic_sicr;
-        u8      res1[2];
-        u32     ic_sivec;
-        u32     ic_sipnrh;
-        u32     ic_sipnrl;
-        u32     ic_siprr;
-        u32     ic_scprrh;
-        u32     ic_scprrl;
-        u32     ic_simrh;
-        u32     ic_simrl;
-        u32     ic_siexr;
-        u8      res2[88];
-} intctl_cpm2_t;
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
-        u32     car_sccr;
-        u8      res1[4];
-        u32     car_scmr;
-        u8      res2[4];
-        u32     car_rsr;
-        u32     car_rmr;
-        u8      res[104];
-} car_cpm2_t;
-
-/* Input/Output Port control/status registers.
- * Names consistent with processor manual, although they are different
- * from the original 8xx names.......
- */
-typedef struct io_port {
-        u32     iop_pdira;
-        u32     iop_ppara;
-        u32     iop_psora;
-        u32     iop_podra;
-        u32     iop_pdata;
-        u8      res1[12];
-        u32     iop_pdirb;
-        u32     iop_pparb;
-        u32     iop_psorb;
-        u32     iop_podrb;
-        u32     iop_pdatb;
-        u8      res2[12];
-        u32     iop_pdirc;
-        u32     iop_pparc;
-        u32     iop_psorc;
-        u32     iop_podrc;
-        u32     iop_pdatc;
-        u8      res3[12];
-        u32     iop_pdird;
-        u32     iop_ppard;
-        u32     iop_psord;
-        u32     iop_podrd;
-        u32     iop_pdatd;
-        u8      res4[12];
-} iop_cpm2_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
-        u8      cpmt_tgcr1;
-        u8      res1[3];
-        u8      cpmt_tgcr2;
-        u8      res2[11];
-        u16     cpmt_tmr1;
-        u16     cpmt_tmr2;
-        u16     cpmt_trr1;
-        u16     cpmt_trr2;
-        u16     cpmt_tcr1;
-        u16     cpmt_tcr2;
-        u16     cpmt_tcn1;
-        u16     cpmt_tcn2;
-        u16     cpmt_tmr3;
-        u16     cpmt_tmr4;
-        u16     cpmt_trr3;
-        u16     cpmt_trr4;
-        u16     cpmt_tcr3;
-        u16     cpmt_tcr4;
-        u16     cpmt_tcn3;
-        u16     cpmt_tcn4;
-        u16     cpmt_ter1;
-        u16     cpmt_ter2;
-        u16     cpmt_ter3;
-        u16     cpmt_ter4;
-        u8      res3[584];
-} cpmtimer_cpm2_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
-        u8      res0[24];
-        u8      sdma_sdsr;
-        u8      res1[3];
-        u8      sdma_sdmr;
-        u8      res2[3];
-        u8      sdma_idsr1;
-        u8      res3[3];
-        u8      sdma_idmr1;
-        u8      res4[3];
-        u8      sdma_idsr2;
-        u8      res5[3];
-        u8      sdma_idmr2;
-        u8      res6[3];
-        u8      sdma_idsr3;
-        u8      res7[3];
-        u8      sdma_idmr3;
-        u8      res8[3];
-        u8      sdma_idsr4;
-        u8      res9[3];
-        u8      sdma_idmr4;
-        u8      res10[707];
-} sdma_cpm2_t;
-
-/* Fast controllers
-*/
-typedef struct fcc {
-        u32     fcc_gfmr;
-        u32     fcc_fpsmr;
-        u16     fcc_ftodr;
-        u8      res1[2];
-        u16     fcc_fdsr;
-        u8      res2[2];
-        u16     fcc_fcce;
-        u8      res3[2];
-        u16     fcc_fccm;
-        u8      res4[2];
-        u8      fcc_fccs;
-        u8      res5[3];
-        u8      fcc_ftirr_phy[4];
-} fcc_t;
-
-/* Fast controllers continued
- */
-typedef struct fcc_c {
-        u32     fcc_firper;
-        u32     fcc_firer;
-        u32     fcc_firsr_hi;
-        u32     fcc_firsr_lo;
-        u8      fcc_gfemr;
-        u8      res1[15];
-} fcc_c_t;
-
-/* TC Layer
- */
-typedef struct tclayer {
-        u16     tc_tcmode;
-        u16     tc_cdsmr;
-        u16     tc_tcer;
-        u16     tc_rcc;
-        u16     tc_tcmr;
-        u16     tc_fcc;
-        u16     tc_ccc;
-        u16     tc_icc;
-        u16     tc_tcc;
-        u16     tc_ecc;
-        u8      res1[12];
-} tclayer_t;
-
-
-/* I2C
-*/
-typedef struct i2c {
-        u8      i2c_i2mod;
-        u8      res1[3];
-        u8      i2c_i2add;
-        u8      res2[3];
-        u8      i2c_i2brg;
-        u8      res3[3];
-        u8      i2c_i2com;
-        u8      res4[3];
-        u8      i2c_i2cer;
-        u8      res5[3];
-        u8      i2c_i2cmr;
-        u8      res6[331];
-} i2c_cpm2_t;
-
-typedef struct scc {            /* Serial communication channels */
-        u32     scc_gsmrl;
-        u32     scc_gsmrh;
-        u16     scc_psmr;
-        u8      res1[2];
-        u16     scc_todr;
-        u16     scc_dsr;
-        u16     scc_scce;
-        u8      res2[2];
-        u16     scc_sccm;
-        u8      res3;
-        u8      scc_sccs;
-        u8      res4[8];
-} scc_t;
-
-typedef struct smc {            /* Serial management channels */
-        u8      res1[2];
-        u16     smc_smcmr;
-        u8      res2[2];
-        u8      smc_smce;
-        u8      res3[3];
-        u8      smc_smcm;
-        u8      res4[5];
-} smc_t;
-
-/* Serial Peripheral Interface.
-*/
-typedef struct spi_ctrl {
-        u16     spi_spmode;
-        u8      res1[4];
-        u8      spi_spie;
-        u8      res2[3];
-        u8      spi_spim;
-        u8      res3[2];
-        u8      spi_spcom;
-        u8      res4[82];
-} spictl_cpm2_t;
-
-/* CPM Mux.
-*/
-typedef struct cpmux {
-        u8      cmx_si1cr;
-        u8      res1;
-        u8      cmx_si2cr;
-        u8      res2;
-        u32     cmx_fcr;
-        u32     cmx_scr;
-        u8      cmx_smr;
-        u8      res3;
-        u16     cmx_uar;
-        u8      res4[16];
-} cpmux_t;
-
-/* SIRAM control
-*/
-typedef struct siram {
-        u16     si_amr;
-        u16     si_bmr;
-        u16     si_cmr;
-        u16     si_dmr;
-        u8      si_gmr;
-        u8      res1;
-        u8      si_cmdr;
-        u8      res2;
-        u8      si_str;
-        u8      res3;
-        u16     si_rsr;
-} siramctl_t;
-
-typedef struct mcc {
-        u16     mcc_mcce;
-        u8      res1[2];
-        u16     mcc_mccm;
-        u8      res2[2];
-        u8      mcc_mccf;
-        u8      res3[7];
-} mcc_t;
-
-typedef struct comm_proc {
-        u32     cp_cpcr;
-        u32     cp_rccr;
-        u8      res1[14];
-        u16     cp_rter;
-        u8      res2[2];
-        u16     cp_rtmr;
-        u16     cp_rtscr;
-        u8      res3[2];
-        u32     cp_rtsr;
-        u8      res4[12];
-} cpm_cpm2_t;
-
-/* USB Controller.
-*/
-typedef struct usb_ctlr {
-        u8      usb_usmod;
-        u8      usb_usadr;
-        u8      usb_uscom;
-        u8      res1[1];
-        u16     usb_usep1;
-        u16     usb_usep2;
-        u16     usb_usep3;
-        u16     usb_usep4;
-        u8      res2[4];
-        u16     usb_usber;
-        u8      res3[2];
-        u16     usb_usbmr;
-        u8      usb_usbs;
-        u8      res4[7];
-} usb_cpm2_t;
-
-/* ...and the whole thing wrapped up....
-*/
-
-typedef struct immap {
-        /* Some references are into the unique and known dpram spaces,
-         * others are from the generic base.
-         */
-#define im_dprambase    im_dpram1
-        u8              im_dpram1[16*1024];
-        u8              res1[16*1024];
-        u8              im_dpram2[4*1024];
-        u8              res2[8*1024];
-        u8              im_dpram3[4*1024];
-        u8              res3[16*1024];
-
-        sysconf_cpm2_t  im_siu_conf;    /* SIU Configuration */
-        memctl_cpm2_t   im_memctl;      /* Memory Controller */
-        sit_cpm2_t      im_sit;         /* System Integration Timers */
-        pci_cpm2_t      im_pci;         /* PCI Controller */
-        intctl_cpm2_t   im_intctl;      /* Interrupt Controller */
-        car_cpm2_t      im_clkrst;      /* Clocks and reset */
-        iop_cpm2_t      im_ioport;      /* IO Port control/status */
-        cpmtimer_cpm2_t im_cpmtimer;    /* CPM timers */
-        sdma_cpm2_t     im_sdma;        /* SDMA control/status */
-
-        fcc_t           im_fcc[3];      /* Three FCCs */
-        u8              res4z[32];
-        fcc_c_t         im_fcc_c[3];    /* Continued FCCs */
-
-        u8              res4[32];
-
-        tclayer_t       im_tclayer[8];  /* Eight TCLayers */
-        u16             tc_tcgsr;
-        u16             tc_tcger;
-
-        /* First set of baud rate generators.
-        */
-        u8              res[236];
-        u32             im_brgc5;
-        u32             im_brgc6;
-        u32             im_brgc7;
-        u32             im_brgc8;
-
-        u8              res5[608];
-
-        i2c_cpm2_t      im_i2c;         /* I2C control/status */
-        cpm_cpm2_t      im_cpm;         /* Communication processor */
-
-        /* Second set of baud rate generators.
-        */
-        u32             im_brgc1;
-        u32             im_brgc2;
-        u32             im_brgc3;
-        u32             im_brgc4;
-
-        scc_t           im_scc[4];      /* Four SCCs */
-        smc_t           im_smc[2];      /* Couple of SMCs */
-        spictl_cpm2_t   im_spi;         /* A SPI */
-        cpmux_t         im_cpmux;       /* CPM clock route mux */
-        siramctl_t      im_siramctl1;   /* First SI RAM Control */
-        mcc_t           im_mcc1;        /* First MCC */
-        siramctl_t      im_siramctl2;   /* Second SI RAM Control */
-        mcc_t           im_mcc2;        /* Second MCC */
-        usb_cpm2_t      im_usb;         /* USB Controller */
-
-        u8              res6[1153];
-
-        u16             im_si1txram[256];
-        u8              res7[512];
-        u16             im_si1rxram[256];
-        u8              res8[512];
-        u16             im_si2txram[256];
-        u8              res9[512];
-        u16             im_si2rxram[256];
-        u8              res10[512];
-        u8              res11[4096];
-} cpm2_map_t;
-
-extern cpm2_map_t __iomem *cpm2_immr;
-
-#endif /* __IMMAP_CPM2__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
deleted file mode 100644
index 7b6f411db3e6..000000000000
--- a/include/asm-powerpc/immap_qe.h
+++ /dev/null
@@ -1,485 +0,0 @@
-/*
- * include/asm-powerpc/immap_qe.h
- *
- * QUICC Engine (QE) Internal Memory Map.
- * The Internal Memory Map for devices with QE on them. This
- * is the superset of all QE devices (8360, etc.).
-
- * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors:     Shlomi Gridish <gridish@freescale.com>
- *              Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_IMMAP_QE_H
-#define _ASM_POWERPC_IMMAP_QE_H
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#define QE_IMMAP_SIZE   (1024 * 1024)   /* 1MB from 1MB+IMMR */
-
-/* QE I-RAM */
-struct qe_iram {
-        __be32  iadd;           /* I-RAM Address Register */
-        __be32  idata;          /* I-RAM Data Register */
-        u8      res0[0x78];
-} __attribute__ ((packed));
-
-/* QE Interrupt Controller */
-struct qe_ic_regs {
-        __be32  qicr;
-        __be32  qivec;
-        __be32  qripnr;
-        __be32  qipnr;
-        __be32  qipxcc;
-        __be32  qipycc;
-        __be32  qipwcc;
-        __be32  qipzcc;
-        __be32  qimr;
-        __be32  qrimr;
-        __be32  qicnr;
-        u8      res0[0x4];
-        __be32  qiprta;
-        __be32  qiprtb;
-        u8      res1[0x4];
-        __be32  qricr;
-        u8      res2[0x20];
-        __be32  qhivec;
-        u8      res3[0x1C];
-} __attribute__ ((packed));
-
-/* Communications Processor */
-struct cp_qe {
-        __be32  cecr;           /* QE command register */
-        __be32  ceccr;          /* QE controller configuration register */
-        __be32  cecdr;          /* QE command data register */
-        u8      res0[0xA];
-        __be16  ceter;          /* QE timer event register */
-        u8      res1[0x2];
-        __be16  cetmr;          /* QE timers mask register */
-        __be32  cetscr;         /* QE time-stamp timer control register */
-        __be32  cetsr1;         /* QE time-stamp register 1 */
-        __be32  cetsr2;         /* QE time-stamp register 2 */
-        u8      res2[0x8];
-        __be32  cevter;         /* QE virtual tasks event register */
-        __be32  cevtmr;         /* QE virtual tasks mask register */
-        __be16  cercr;          /* QE RAM control register */
-        u8      res3[0x2];
-        u8      res4[0x24];
-        __be16  ceexe1;         /* QE external request 1 event register */
-        u8      res5[0x2];
-        __be16  ceexm1;         /* QE external request 1 mask register */
-        u8      res6[0x2];
-        __be16  ceexe2;         /* QE external request 2 event register */
-        u8      res7[0x2];
-        __be16  ceexm2;         /* QE external request 2 mask register */
-        u8      res8[0x2];
-        __be16  ceexe3;         /* QE external request 3 event register */
-        u8      res9[0x2];
-        __be16  ceexm3;         /* QE external request 3 mask register */
-        u8      res10[0x2];
-        __be16  ceexe4;         /* QE external request 4 event register */
-        u8      res11[0x2];
-        __be16  ceexm4;         /* QE external request 4 mask register */
-        u8      res12[0x3A];
-        __be32  ceurnr;         /* QE microcode revision number register */
-        u8      res13[0x244];
-} __attribute__ ((packed));
-
-/* QE Multiplexer */
-struct qe_mux {
-        __be32  cmxgcr;         /* CMX general clock route register */
-        __be32  cmxsi1cr_l;     /* CMX SI1 clock route low register */
-        __be32  cmxsi1cr_h;     /* CMX SI1 clock route high register */
-        __be32  cmxsi1syr;      /* CMX SI1 SYNC route register */
-        __be32  cmxucr[4];      /* CMX UCCx clock route registers */
-        __be32  cmxupcr;        /* CMX UPC clock route register */
-        u8      res0[0x1C];
-} __attribute__ ((packed));
-
-/* QE Timers */
-struct qe_timers {
-        u8      gtcfr1;         /* Timer 1 and Timer 2 global config register*/
-        u8      res0[0x3];
-        u8      gtcfr2;         /* Timer 3 and timer 4 global config register*/
-        u8      res1[0xB];
-        __be16  gtmdr1;         /* Timer 1 mode register */
-        __be16  gtmdr2;         /* Timer 2 mode register */
-        __be16  gtrfr1;         /* Timer 1 reference register */
-        __be16  gtrfr2;         /* Timer 2 reference register */
-        __be16  gtcpr1;         /* Timer 1 capture register */
-        __be16  gtcpr2;         /* Timer 2 capture register */
-        __be16  gtcnr1;         /* Timer 1 counter */
-        __be16  gtcnr2;         /* Timer 2 counter */
-        __be16  gtmdr3;         /* Timer 3 mode register */
-        __be16  gtmdr4;         /* Timer 4 mode register */
-        __be16  gtrfr3;         /* Timer 3 reference register */
-        __be16  gtrfr4;         /* Timer 4 reference register */
-        __be16  gtcpr3;         /* Timer 3 capture register */
-        __be16  gtcpr4;         /* Timer 4 capture register */
-        __be16  gtcnr3;         /* Timer 3 counter */
-        __be16  gtcnr4;         /* Timer 4 counter */
-        __be16  gtevr1;         /* Timer 1 event register */
-        __be16  gtevr2;         /* Timer 2 event register */
-        __be16  gtevr3;         /* Timer 3 event register */
-        __be16  gtevr4;         /* Timer 4 event register */
-        __be16  gtps;           /* Timer 1 prescale register */
-        u8 res2[0x46];
-} __attribute__ ((packed));
-
-/* BRG */
-struct qe_brg {
-        __be32  brgc[16];       /* BRG configuration registers */
-        u8      res0[0x40];
-} __attribute__ ((packed));
-
-/* SPI */
-struct spi {
-        u8      res0[0x20];
-        __be32  spmode;         /* SPI mode register */
-        u8      res1[0x2];
-        u8      spie;           /* SPI event register */
-        u8      res2[0x1];
-        u8      res3[0x2];
-        u8      spim;           /* SPI mask register */
-        u8      res4[0x1];
-        u8      res5[0x1];
-        u8      spcom;          /* SPI command register */
-        u8      res6[0x2];
-        __be32  spitd;          /* SPI transmit data register (cpu mode) */
-        __be32  spird;          /* SPI receive data register (cpu mode) */
-        u8      res7[0x8];
-} __attribute__ ((packed));
-
-/* SI */
-struct si1 {
-        __be16  siamr1;         /* SI1 TDMA mode register */
-        __be16  sibmr1;         /* SI1 TDMB mode register */
-        __be16  sicmr1;         /* SI1 TDMC mode register */
-        __be16  sidmr1;         /* SI1 TDMD mode register */
-        u8      siglmr1_h;      /* SI1 global mode register high */
-        u8      res0[0x1];
-        u8      sicmdr1_h;      /* SI1 command register high */
-        u8      res2[0x1];
-        u8      sistr1_h;       /* SI1 status register high */
-        u8      res3[0x1];
-        __be16  sirsr1_h;       /* SI1 RAM shadow address register high */
-        u8      sitarc1;        /* SI1 RAM counter Tx TDMA */
-        u8      sitbrc1;        /* SI1 RAM counter Tx TDMB */
-        u8      sitcrc1;        /* SI1 RAM counter Tx TDMC */
-        u8      sitdrc1;        /* SI1 RAM counter Tx TDMD */
-        u8      sirarc1;        /* SI1 RAM counter Rx TDMA */
-        u8      sirbrc1;        /* SI1 RAM counter Rx TDMB */
-        u8      sircrc1;        /* SI1 RAM counter Rx TDMC */
-        u8      sirdrc1;        /* SI1 RAM counter Rx TDMD */
-        u8      res4[0x8];
-        __be16  siemr1;         /* SI1 TDME mode register 16 bits */
-        __be16  sifmr1;         /* SI1 TDMF mode register 16 bits */
-        __be16  sigmr1;         /* SI1 TDMG mode register 16 bits */
-        __be16  sihmr1;         /* SI1 TDMH mode register 16 bits */
-        u8      siglmg1_l;      /* SI1 global mode register low 8 bits */
-        u8      res5[0x1];
-        u8      sicmdr1_l;      /* SI1 command register low 8 bits */
-        u8      res6[0x1];
-        u8      sistr1_l;       /* SI1 status register low 8 bits */
-        u8      res7[0x1];
-        __be16  sirsr1_l;       /* SI1 RAM shadow address register low 16 bits*/
-        u8      siterc1;        /* SI1 RAM counter Tx TDME 8 bits */
-        u8      sitfrc1;        /* SI1 RAM counter Tx TDMF 8 bits */
-        u8      sitgrc1;        /* SI1 RAM counter Tx TDMG 8 bits */
-        u8      sithrc1;        /* SI1 RAM counter Tx TDMH 8 bits */
-        u8      sirerc1;        /* SI1 RAM counter Rx TDME 8 bits */
-        u8      sirfrc1;        /* SI1 RAM counter Rx TDMF 8 bits */
-        u8      sirgrc1;        /* SI1 RAM counter Rx TDMG 8 bits */
-        u8      sirhrc1;        /* SI1 RAM counter Rx TDMH 8 bits */
-        u8      res8[0x8];
-        __be32  siml1;          /* SI1 multiframe limit register */
-        u8      siedm1;         /* SI1 extended diagnostic mode register */
-        u8      res9[0xBB];
-} __attribute__ ((packed));
-
-/* SI Routing Tables */
-struct sir {
-        u8      tx[0x400];
-        u8      rx[0x400];
-        u8      res0[0x800];
-} __attribute__ ((packed));
-
-/* USB Controller */
-struct usb_ctlr {
-        u8      usb_usmod;
-        u8      usb_usadr;
-        u8      usb_uscom;
-        u8      res1[1];
-        __be16  usb_usep1;
-        __be16  usb_usep2;
-        __be16  usb_usep3;
-        __be16  usb_usep4;
-        u8      res2[4];
-        __be16  usb_usber;
-        u8      res3[2];
-        __be16  usb_usbmr;
-        u8      res4[1];
-        u8      usb_usbs;
-        __be16  usb_ussft;
-        u8      res5[2];
-        __be16  usb_usfrn;
-        u8      res6[0x22];
-} __attribute__ ((packed));
-
-/* MCC */
-struct mcc {
-        __be32  mcce;           /* MCC event register */
-        __be32  mccm;           /* MCC mask register */
-        __be32  mccf;           /* MCC configuration register */
-        __be32  merl;           /* MCC emergency request level register */
-        u8      res0[0xF0];
-} __attribute__ ((packed));
-
-/* QE UCC Slow */
-struct ucc_slow {
-        __be32  gumr_l;         /* UCCx general mode register (low) */
-        __be32  gumr_h;         /* UCCx general mode register (high) */
-        __be16  upsmr;          /* UCCx protocol-specific mode register */
-        u8      res0[0x2];
-        __be16  utodr;          /* UCCx transmit on demand register */
-        __be16  udsr;           /* UCCx data synchronization register */
-        __be16  ucce;           /* UCCx event register */
-        u8      res1[0x2];
-        __be16  uccm;           /* UCCx mask register */
-        u8      res2[0x1];
-        u8      uccs;           /* UCCx status register */
-        u8      res3[0x24];
-        __be16  utpt;
-        u8      res4[0x52];
-        u8      guemr;          /* UCC general extended mode register */
-} __attribute__ ((packed));
-
-/* QE UCC Fast */
-struct ucc_fast {
-        __be32  gumr;           /* UCCx general mode register */
-        __be32  upsmr;          /* UCCx protocol-specific mode register */
-        __be16  utodr;          /* UCCx transmit on demand register */
-        u8      res0[0x2];
-        __be16  udsr;           /* UCCx data synchronization register */
-        u8      res1[0x2];
-        __be32  ucce;           /* UCCx event register */
-        __be32  uccm;           /* UCCx mask register */
-        u8      uccs;           /* UCCx status register */
-        u8      res2[0x7];
-        __be32  urfb;           /* UCC receive FIFO base */
-        __be16  urfs;           /* UCC receive FIFO size */
-        u8      res3[0x2];
-        __be16  urfet;          /* UCC receive FIFO emergency threshold */
-        __be16  urfset;         /* UCC receive FIFO special emergency
-                                   threshold */
-        __be32  utfb;           /* UCC transmit FIFO base */
-        __be16  utfs;           /* UCC transmit FIFO size */
-        u8      res4[0x2];
-        __be16  utfet;          /* UCC transmit FIFO emergency threshold */
-        u8      res5[0x2];
-        __be16  utftt;          /* UCC transmit FIFO transmit threshold */
-        u8      res6[0x2];
-        __be16  utpt;           /* UCC transmit polling timer */
-        u8      res7[0x2];
-        __be32  urtry;          /* UCC retry counter register */
-        u8      res8[0x4C];
-        u8      guemr;          /* UCC general extended mode register */
-} __attribute__ ((packed));
-
-struct ucc {
-        union {
-                struct  ucc_slow slow;
-                struct  ucc_fast fast;
-                u8      res[0x200];     /* UCC blocks are 512 bytes each */
-        };
-} __attribute__ ((packed));
-
-/* MultiPHY UTOPIA POS Controllers (UPC) */
-struct upc {
-        __be32  upgcr;          /* UTOPIA/POS general configuration register */
-        __be32  uplpa;          /* UTOPIA/POS last PHY address */
-        __be32  uphec;          /* ATM HEC register */
-        __be32  upuc;           /* UTOPIA/POS UCC configuration */
-        __be32  updc1;          /* UTOPIA/POS device 1 configuration */
-        __be32  updc2;          /* UTOPIA/POS device 2 configuration */
-        __be32  updc3;          /* UTOPIA/POS device 3 configuration */
-        __be32  updc4;          /* UTOPIA/POS device 4 configuration */
-        __be32  upstpa;         /* UTOPIA/POS STPA threshold */
-        u8      res0[0xC];
-        __be32  updrs1_h;       /* UTOPIA/POS device 1 rate select */
-        __be32  updrs1_l;       /* UTOPIA/POS device 1 rate select */
-        __be32  updrs2_h;       /* UTOPIA/POS device 2 rate select */
-        __be32  updrs2_l;       /* UTOPIA/POS device 2 rate select */
-        __be32  updrs3_h;       /* UTOPIA/POS device 3 rate select */
-        __be32  updrs3_l;       /* UTOPIA/POS device 3 rate select */
-        __be32  updrs4_h;       /* UTOPIA/POS device 4 rate select */
-        __be32  updrs4_l;       /* UTOPIA/POS device 4 rate select */
-        __be32  updrp1;         /* UTOPIA/POS device 1 receive priority low */
-        __be32  updrp2;         /* UTOPIA/POS device 2 receive priority low */
-        __be32  updrp3;         /* UTOPIA/POS device 3 receive priority low */
-        __be32  updrp4;         /* UTOPIA/POS device 4 receive priority low */
-        __be32  upde1;          /* UTOPIA/POS device 1 event */
-        __be32  upde2;          /* UTOPIA/POS device 2 event */
-        __be32  upde3;          /* UTOPIA/POS device 3 event */
-        __be32  upde4;          /* UTOPIA/POS device 4 event */
-        __be16  uprp1;
-        __be16  uprp2;
-        __be16  uprp3;
-        __be16  uprp4;
-        u8      res1[0x8];
-        __be16  uptirr1_0;      /* Device 1 transmit internal rate 0 */
-        __be16  uptirr1_1;      /* Device 1 transmit internal rate 1 */
-        __be16  uptirr1_2;      /* Device 1 transmit internal rate 2 */
-        __be16  uptirr1_3;      /* Device 1 transmit internal rate 3 */
-        __be16  uptirr2_0;      /* Device 2 transmit internal rate 0 */
-        __be16  uptirr2_1;      /* Device 2 transmit internal rate 1 */
-        __be16  uptirr2_2;      /* Device 2 transmit internal rate 2 */
-        __be16  uptirr2_3;      /* Device 2 transmit internal rate 3 */
-        __be16  uptirr3_0;      /* Device 3 transmit internal rate 0 */
-        __be16  uptirr3_1;      /* Device 3 transmit internal rate 1 */
-        __be16  uptirr3_2;      /* Device 3 transmit internal rate 2 */
-        __be16  uptirr3_3;      /* Device 3 transmit internal rate 3 */
-        __be16  uptirr4_0;      /* Device 4 transmit internal rate 0 */
-        __be16  uptirr4_1;      /* Device 4 transmit internal rate 1 */
-        __be16  uptirr4_2;      /* Device 4 transmit internal rate 2 */
-        __be16  uptirr4_3;      /* Device 4 transmit internal rate 3 */
-        __be32  uper1;          /* Device 1 port enable register */
-        __be32  uper2;          /* Device 2 port enable register */
-        __be32  uper3;          /* Device 3 port enable register */
-        __be32  uper4;          /* Device 4 port enable register */
-        u8      res2[0x150];
-} __attribute__ ((packed));
-
-/* SDMA */
-struct sdma {
-        __be32  sdsr;           /* Serial DMA status register */
-        __be32  sdmr;           /* Serial DMA mode register */
-        __be32  sdtr1;          /* SDMA system bus threshold register */
-        __be32  sdtr2;          /* SDMA secondary bus threshold register */
-        __be32  sdhy1;          /* SDMA system bus hysteresis register */
-        __be32  sdhy2;          /* SDMA secondary bus hysteresis register */
-        __be32  sdta1;          /* SDMA system bus address register */
-        __be32  sdta2;          /* SDMA secondary bus address register */
-        __be32  sdtm1;          /* SDMA system bus MSNUM register */
-        __be32  sdtm2;          /* SDMA secondary bus MSNUM register */
-        u8      res0[0x10];
-        __be32  sdaqr;          /* SDMA address bus qualify register */
-        __be32  sdaqmr;         /* SDMA address bus qualify mask register */
-        u8      res1[0x4];
-        __be32  sdebcr;         /* SDMA CAM entries base register */
-        u8      res2[0x38];
-} __attribute__ ((packed));
-
-/* Debug Space */
-struct dbg {
-        __be32  bpdcr;          /* Breakpoint debug command register */
-        __be32  bpdsr;          /* Breakpoint debug status register */
-        __be32  bpdmr;          /* Breakpoint debug mask register */
-        __be32  bprmrr0;        /* Breakpoint request mode risc register 0 */
-        __be32  bprmrr1;        /* Breakpoint request mode risc register 1 */
-        u8      res0[0x8];
-        __be32  bprmtr0;        /* Breakpoint request mode trb register 0 */
-        __be32  bprmtr1;        /* Breakpoint request mode trb register 1 */
-        u8      res1[0x8];
-        __be32  bprmir;         /* Breakpoint request mode immediate register */
-        __be32  bprmsr;         /* Breakpoint request mode serial register */
-        __be32  bpemr;          /* Breakpoint exit mode register */
-        u8      res2[0x48];
-} __attribute__ ((packed));
-
-/*
- * RISC Special Registers (Trap and Breakpoint).  These are described in
- * the QE Developer's Handbook.
- */
-struct rsp {
-        __be32 tibcr[16];       /* Trap/instruction breakpoint control regs */
-        u8 res0[64];
-        __be32 ibcr0;
-        __be32 ibs0;
-        __be32 ibcnr0;
-        u8 res1[4];
-        __be32 ibcr1;
-        __be32 ibs1;
-        __be32 ibcnr1;
-        __be32 npcr;
-        __be32 dbcr;
-        __be32 dbar;
-        __be32 dbamr;
-        __be32 dbsr;
-        __be32 dbcnr;
-        u8 res2[12];
-        __be32 dbdr_h;
-        __be32 dbdr_l;
-        __be32 dbdmr_h;
-        __be32 dbdmr_l;
-        __be32 bsr;
-        __be32 bor;
-        __be32 bior;
-        u8 res3[4];
-        __be32 iatr[4];
-        __be32 eccr;            /* Exception control configuration register */
-        __be32 eicr;
-        u8 res4[0x100-0xf8];
-} __attribute__ ((packed));
-
-struct qe_immap {
-        struct qe_iram          iram;           /* I-RAM */
-        struct qe_ic_regs       ic;             /* Interrupt Controller */
-        struct cp_qe            cp;             /* Communications Processor */
-        struct qe_mux           qmx;            /* QE Multiplexer */
-        struct qe_timers        qet;            /* QE Timers */
-        struct spi              spi[0x2];       /* spi */
-        struct mcc              mcc;            /* mcc */
-        struct qe_brg           brg;            /* brg */
-        struct usb_ctlr         usb;            /* USB */
-        struct si1              si1;            /* SI */
-        u8                      res11[0x800];
-        struct sir              sir;            /* SI Routing Tables */
-        struct ucc              ucc1;           /* ucc1 */
-        struct ucc              ucc3;           /* ucc3 */
-        struct ucc              ucc5;           /* ucc5 */
-        struct ucc              ucc7;           /* ucc7 */
-        u8                      res12[0x600];
-        struct upc              upc1;           /* MultiPHY UTOPIA POS Ctrlr 1*/
-        struct ucc              ucc2;           /* ucc2 */
-        struct ucc              ucc4;           /* ucc4 */
-        struct ucc              ucc6;           /* ucc6 */
-        struct ucc              ucc8;           /* ucc8 */
-        u8                      res13[0x600];
-        struct upc              upc2;           /* MultiPHY UTOPIA POS Ctrlr 2*/
-        struct sdma             sdma;           /* SDMA */
-        struct dbg              dbg;            /* 0x104080 - 0x1040FF
-                                                   Debug Space */
-        struct rsp              rsp[0x2];       /* 0x104100 - 0x1042FF
-                                                   RISC Special Registers
-                                                   (Trap and Breakpoint) */
-        u8                      res14[0x300];   /* 0x104300 - 0x1045FF */
-        u8                      res15[0x3A00];  /* 0x104600 - 0x107FFF */
-        u8                      res16[0x8000];  /* 0x108000 - 0x110000 */
-        u8                      muram[0xC000];  /* 0x110000 - 0x11C000
-                                                   Multi-user RAM */
-        u8                      res17[0x24000]; /* 0x11C000 - 0x140000 */
-        u8                      res18[0xC0000]; /* 0x140000 - 0x200000 */
-} __attribute__ ((packed));
-
-extern struct qe_immap __iomem *qe_immr;
-extern phys_addr_t get_qe_base(void);
-
-static inline unsigned long immrbar_virt_to_phys(void *address)
-{
-        if ( ((u32)address >= (u32)qe_immr) &&
-                        ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
-                return (unsigned long)(address - (u32)qe_immr +
-                                (u32)get_qe_base());
-        return (unsigned long)virt_to_phys(address);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/include/asm-powerpc/io-defs.h b/include/asm-powerpc/io-defs.h
deleted file mode 100644
index 44d7927aec69..000000000000
--- a/include/asm-powerpc/io-defs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* This file is meant to be include multiple times by other headers */
-/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */
-
-DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-
-#ifdef __powerpc64__
-DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-#endif /* __powerpc64__ */
-
-DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
-DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port)
-DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port)
-DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port)
-DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port)
-DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port)
-
-DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c),
-                 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c),
-                 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c),
-                 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c),
-                 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c),
-                 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c),
-                 (a, b, c), mem, a)
-
-DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c),
-                 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c),
-                 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
-                 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
-                 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
-                 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
-                 (p, b, c), pio, p)
-
-DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n),
-                 (a, c, n), mem, a)
-DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n),
-                 (d, s, n), mem, s)
-DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n),
-                 (d, s, n), mem, d)
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
deleted file mode 100644
index 77c7fa025e65..000000000000
--- a/include/asm-powerpc/io.h
+++ /dev/null
@@ -1,787 +0,0 @@
-#ifndef _ASM_POWERPC_IO_H
-#define _ASM_POWERPC_IO_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Check of existence of legacy devices */
-extern int check_legacy_ioport(unsigned long base_port);
-#define I8042_DATA_REG  0x60
-#define FDC_BASE        0x3f0
-/* only relevant for PReP */
-#define _PIDXR          0x279
-#define _PNPWRP         0xa79
-#define PNPBIOS_BASE    0xf000
-
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/byteorder.h>
-#include <asm/synch.h>
-#include <asm/delay.h>
-#include <asm/mmu.h>
-
-#include <asm-generic/iomap.h>
-
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-#endif
-
-#define SIO_CONFIG_RA   0x398
-#define SIO_CONFIG_RD   0x399
-
-#define SLOW_DOWN_IO
-
-/* 32 bits uses slightly different variables for the various IO
- * bases. Most of this file only uses _IO_BASE though which we
- * define properly based on the platform
- */
-#ifndef CONFIG_PCI
-#define _IO_BASE        0
-#define _ISA_MEM_BASE   0
-#define PCI_DRAM_OFFSET 0
-#elif defined(CONFIG_PPC32)
-#define _IO_BASE        isa_io_base
-#define _ISA_MEM_BASE   isa_mem_base
-#define PCI_DRAM_OFFSET pci_dram_offset
-#else
-#define _IO_BASE        pci_io_base
-#define _ISA_MEM_BASE   isa_mem_base
-#define PCI_DRAM_OFFSET 0
-#endif
-
-extern unsigned long isa_io_base;
-extern unsigned long pci_io_base;
-extern unsigned long pci_dram_offset;
-
-extern resource_size_t isa_mem_base;
-
-#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
-#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
-#endif
-
-/*
- *
- * Low level MMIO accessors
- *
- * This provides the non-bus specific accessors to MMIO. Those are PowerPC
- * specific and thus shouldn't be used in generic code. The accessors
- * provided here are:
- *
- *      in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
- *      out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
- *      _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
- *
- * Those operate directly on a kernel virtual address. Note that the prototype
- * for the out_* accessors has the arguments in opposite order from the usual
- * linux PCI accessors. Unlike those, they take the address first and the value
- * next.
- *
- * Note: I might drop the _ns suffix on the stream operations soon as it is
- * simply normal for stream operations to not swap in the first place.
- *
- */
-
-#ifdef CONFIG_PPC64
-#define IO_SET_SYNC_FLAG()      do { local_paca->io_sync = 1; } while(0)
-#else
-#define IO_SET_SYNC_FLAG()
-#endif
-
-/* gcc 4.0 and older doesn't have 'Z' constraint */
-#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
-#define DEF_MMIO_IN_LE(name, size, insn)                                \
-static inline u##size name(const volatile u##size __iomem *addr)        \
-{                                                                       \
-        u##size ret;                                                    \
-        __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync"    \
-                : "=r" (ret) : "r" (addr), "m" (*addr) : "memory");     \
-        return ret;                                                     \
-}
-
-#define DEF_MMIO_OUT_LE(name, size, insn)                               \
-static inline void name(volatile u##size __iomem *addr, u##size val)    \
-{                                                                       \
-        __asm__ __volatile__("sync;"#insn" %1,0,%2"                     \
-                : "=m" (*addr) : "r" (val), "r" (addr) : "memory");     \
-        IO_SET_SYNC_FLAG();                                             \
-}
-#else /* newer gcc */
-#define DEF_MMIO_IN_LE(name, size, insn)                                \
-static inline u##size name(const volatile u##size __iomem *addr)        \
-{                                                                       \
-        u##size ret;                                                    \
-        __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync"     \
-                : "=r" (ret) : "Z" (*addr) : "memory");                 \
-        return ret;                                                     \
-}
-
-#define DEF_MMIO_OUT_LE(name, size, insn)                               \
-static inline void name(volatile u##size __iomem *addr, u##size val)    \
-{                                                                       \
-        __asm__ __volatile__("sync;"#insn" %1,%y0"                      \
-                : "=Z" (*addr) : "r" (val) : "memory");                 \
-        IO_SET_SYNC_FLAG();                                             \
-}
-#endif
-
-#define DEF_MMIO_IN_BE(name, size, insn)                                \
-static inline u##size name(const volatile u##size __iomem *addr)        \
-{                                                                       \
-        u##size ret;                                                    \
-        __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
-                : "=r" (ret) : "m" (*addr) : "memory");                 \
-        return ret;                                                     \
-}
-
-#define DEF_MMIO_OUT_BE(name, size, insn)                               \
-static inline void name(volatile u##size __iomem *addr, u##size val)    \
-{                                                                       \
-        __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0"                 \
-                : "=m" (*addr) : "r" (val) : "memory");                 \
-        IO_SET_SYNC_FLAG();                                             \
-}
-
-
-DEF_MMIO_IN_BE(in_8,     8, lbz);
-DEF_MMIO_IN_BE(in_be16, 16, lhz);
-DEF_MMIO_IN_BE(in_be32, 32, lwz);
-DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
-DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
-
-DEF_MMIO_OUT_BE(out_8,     8, stb);
-DEF_MMIO_OUT_BE(out_be16, 16, sth);
-DEF_MMIO_OUT_BE(out_be32, 32, stw);
-DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
-DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
-
-#ifdef __powerpc64__
-DEF_MMIO_OUT_BE(out_be64, 64, std);
-DEF_MMIO_IN_BE(in_be64, 64, ld);
-
-/* There is no asm instructions for 64 bits reverse loads and stores */
-static inline u64 in_le64(const volatile u64 __iomem *addr)
-{
-        return swab64(in_be64(addr));
-}
-
-static inline void out_le64(volatile u64 __iomem *addr, u64 val)
-{
-        out_be64(addr, swab64(val));
-}
-#endif /* __powerpc64__ */
-
-/*
- * Low level IO stream instructions are defined out of line for now
- */
-extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
-extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
-extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
-extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
-extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
-extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
-
-/* The _ns naming is historical and will be removed. For now, just #define
- * the non _ns equivalent names
- */
-#define _insw   _insw_ns
-#define _insl   _insl_ns
-#define _outsw  _outsw_ns
-#define _outsl  _outsl_ns
-
-
-/*
- * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
- */
-
-extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
-extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
-                           unsigned long n);
-extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
-                         unsigned long n);
-
-/*
- *
- * PCI and standard ISA accessors
- *
- * Those are globally defined linux accessors for devices on PCI or ISA
- * busses. They follow the Linux defined semantics. The current implementation
- * for PowerPC is as close as possible to the x86 version of these, and thus
- * provides fairly heavy weight barriers for the non-raw versions
- *
- * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
- * allowing the platform to provide its own implementation of some or all
- * of the accessors.
- */
-
-/*
- * Include the EEH definitions when EEH is enabled only so they don't get
- * in the way when building for 32 bits
- */
-#ifdef CONFIG_EEH
-#include <asm/eeh.h>
-#endif
-
-/* Shortcut to the MMIO argument pointer */
-#define PCI_IO_ADDR     volatile void __iomem *
-
-/* Indirect IO address tokens:
- *
- * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
- * on all IOs. (Note that this is all 64 bits only for now)
- *
- * To help platforms who may need to differenciate MMIO addresses in
- * their hooks, a bitfield is reserved for use by the platform near the
- * top of MMIO addresses (not PIO, those have to cope the hard way).
- *
- * This bit field is 12 bits and is at the top of the IO virtual
- * addresses PCI_IO_INDIRECT_TOKEN_MASK.
- *
- * The kernel virtual space is thus:
- *
- *  0xD000000000000000          : vmalloc
- *  0xD000080000000000          : PCI PHB IO space
- *  0xD000080080000000          : ioremap
- *  0xD0000fffffffffff          : end of ioremap region
- *
- * Since the top 4 bits are reserved as the region ID, we use thus
- * the next 12 bits and keep 4 bits available for the future if the
- * virtual address space is ever to be extended.
- *
- * The direct IO mapping operations will then mask off those bits
- * before doing the actual access, though that only happen when
- * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
- * mechanism
- */
-
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define PCI_IO_IND_TOKEN_MASK   0x0fff000000000000ul
-#define PCI_IO_IND_TOKEN_SHIFT  48
-#define PCI_FIX_ADDR(addr)                                              \
-        ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
-#define PCI_GET_ADDR_TOKEN(addr)                                        \
-        (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >>             \
-                PCI_IO_IND_TOKEN_SHIFT)
-#define PCI_SET_ADDR_TOKEN(addr, token)                                 \
-do {                                                                    \
-        unsigned long __a = (unsigned long)(addr);                      \
-        __a &= ~PCI_IO_IND_TOKEN_MASK;                                  \
-        __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT;      \
-        (addr) = (void __iomem *)__a;                                   \
-} while(0)
-#else
-#define PCI_FIX_ADDR(addr) (addr)
-#endif
-
-
-/*
- * Non ordered and non-swapping "raw" accessors
- */
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
-        return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
-        return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
-        return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
-        *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
-        *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
-        *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
-}
-
-#ifdef __powerpc64__
-static inline unsigned long __raw_readq(const volatile void __iomem *addr)
-{
-        return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
-}
-static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
-{
-        *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
-}
-#endif /* __powerpc64__ */
-
-/*
- *
- * PCI PIO and MMIO accessors.
- *
- *
- * On 32 bits, PIO operations have a recovery mechanism in case they trigger
- * machine checks (which they occasionally do when probing non existing
- * IO ports on some platforms, like PowerMac and 8xx).
- * I always found it to be of dubious reliability and I am tempted to get
- * rid of it one of these days. So if you think it's important to keep it,
- * please voice up asap. We never had it for 64 bits and I do not intend
- * to port it over
- */
-
-#ifdef CONFIG_PPC32
-
-#define __do_in_asm(name, op)                           \
-static inline unsigned int name(unsigned int port)      \
-{                                                       \
-        unsigned int x;                                 \
-        __asm__ __volatile__(                           \
-                "sync\n"                                \
-                "0:"    op "    %0,0,%1\n"              \
-                "1:     twi     0,%0,0\n"               \
-                "2:     isync\n"                        \
-                "3:     nop\n"                          \
-                "4:\n"                                  \
-                ".section .fixup,\"ax\"\n"              \
-                "5:     li      %0,-1\n"                \
-                "       b       4b\n"                   \
-                ".previous\n"                           \
-                ".section __ex_table,\"a\"\n"           \
-                "       .align  2\n"                    \
-                "       .long   0b,5b\n"                \
-                "       .long   1b,5b\n"                \
-                "       .long   2b,5b\n"                \
-                "       .long   3b,5b\n"                \
-                ".previous"                             \
-                : "=&r" (x)                             \
-                : "r" (port + _IO_BASE)                 \
-                : "memory");                            \
-        return x;                                       \
-}
-
-#define __do_out_asm(name, op)                          \
-static inline void name(unsigned int val, unsigned int port) \
-{                                                       \
-        __asm__ __volatile__(                           \
-                "sync\n"                                \
-                "0:" op " %0,0,%1\n"                    \
-                "1:     sync\n"                         \
-                "2:\n"                                  \
-                ".section __ex_table,\"a\"\n"           \
-                "       .align  2\n"                    \
-                "       .long   0b,2b\n"                \
-                "       .long   1b,2b\n"                \
-                ".previous"                             \
-                : : "r" (val), "r" (port + _IO_BASE)    \
-                : "memory");                            \
-}
-
-__do_in_asm(_rec_inb, "lbzx")
-__do_in_asm(_rec_inw, "lhbrx")
-__do_in_asm(_rec_inl, "lwbrx")
-__do_out_asm(_rec_outb, "stbx")
-__do_out_asm(_rec_outw, "sthbrx")
-__do_out_asm(_rec_outl, "stwbrx")
-
-#endif /* CONFIG_PPC32 */
-
-/* The "__do_*" operations below provide the actual "base" implementation
- * for each of the defined acccessor. Some of them use the out_* functions
- * directly, some of them still use EEH, though we might change that in the
- * future. Those macros below provide the necessary argument swapping and
- * handling of the IO base for PIO.
- *
- * They are themselves used by the macros that define the actual accessors
- * and can be used by the hooks if any.
- *
- * Note that PIO operations are always defined in terms of their corresonding
- * MMIO operations. That allows platforms like iSeries who want to modify the
- * behaviour of both to only hook on the MMIO version and get both. It's also
- * possible to hook directly at the toplevel PIO operation if they have to
- * be handled differently
- */
-#define __do_writeb(val, addr)  out_8(PCI_FIX_ADDR(addr), val)
-#define __do_writew(val, addr)  out_le16(PCI_FIX_ADDR(addr), val)
-#define __do_writel(val, addr)  out_le32(PCI_FIX_ADDR(addr), val)
-#define __do_writeq(val, addr)  out_le64(PCI_FIX_ADDR(addr), val)
-#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
-#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
-#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
-
-#ifdef CONFIG_EEH
-#define __do_readb(addr)        eeh_readb(PCI_FIX_ADDR(addr))
-#define __do_readw(addr)        eeh_readw(PCI_FIX_ADDR(addr))
-#define __do_readl(addr)        eeh_readl(PCI_FIX_ADDR(addr))
-#define __do_readq(addr)        eeh_readq(PCI_FIX_ADDR(addr))
-#define __do_readw_be(addr)     eeh_readw_be(PCI_FIX_ADDR(addr))
-#define __do_readl_be(addr)     eeh_readl_be(PCI_FIX_ADDR(addr))
-#define __do_readq_be(addr)     eeh_readq_be(PCI_FIX_ADDR(addr))
-#else /* CONFIG_EEH */
-#define __do_readb(addr)        in_8(PCI_FIX_ADDR(addr))
-#define __do_readw(addr)        in_le16(PCI_FIX_ADDR(addr))
-#define __do_readl(addr)        in_le32(PCI_FIX_ADDR(addr))
-#define __do_readq(addr)        in_le64(PCI_FIX_ADDR(addr))
-#define __do_readw_be(addr)     in_be16(PCI_FIX_ADDR(addr))
-#define __do_readl_be(addr)     in_be32(PCI_FIX_ADDR(addr))
-#define __do_readq_be(addr)     in_be64(PCI_FIX_ADDR(addr))
-#endif /* !defined(CONFIG_EEH) */
-
-#ifdef CONFIG_PPC32
-#define __do_outb(val, port)    _rec_outb(val, port)
-#define __do_outw(val, port)    _rec_outw(val, port)
-#define __do_outl(val, port)    _rec_outl(val, port)
-#define __do_inb(port)          _rec_inb(port)
-#define __do_inw(port)          _rec_inw(port)
-#define __do_inl(port)          _rec_inl(port)
-#else /* CONFIG_PPC32 */
-#define __do_outb(val, port)    writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_outw(val, port)    writew(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_outl(val, port)    writel(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_inb(port)          readb((PCI_IO_ADDR)_IO_BASE + port);
-#define __do_inw(port)          readw((PCI_IO_ADDR)_IO_BASE + port);
-#define __do_inl(port)          readl((PCI_IO_ADDR)_IO_BASE + port);
-#endif /* !CONFIG_PPC32 */
-
-#ifdef CONFIG_EEH
-#define __do_readsb(a, b, n)    eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsw(a, b, n)    eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsl(a, b, n)    eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
-#else /* CONFIG_EEH */
-#define __do_readsb(a, b, n)    _insb(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsw(a, b, n)    _insw(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsl(a, b, n)    _insl(PCI_FIX_ADDR(a), (b), (n))
-#endif /* !CONFIG_EEH */
-#define __do_writesb(a, b, n)   _outsb(PCI_FIX_ADDR(a),(b),(n))
-#define __do_writesw(a, b, n)   _outsw(PCI_FIX_ADDR(a),(b),(n))
-#define __do_writesl(a, b, n)   _outsl(PCI_FIX_ADDR(a),(b),(n))
-
-#define __do_insb(p, b, n)      readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_insw(p, b, n)      readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_insl(p, b, n)      readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_outsb(p, b, n)     writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-#define __do_outsw(p, b, n)     writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-#define __do_outsl(p, b, n)     writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-
-#define __do_memset_io(addr, c, n)      \
-                                _memset_io(PCI_FIX_ADDR(addr), c, n)
-#define __do_memcpy_toio(dst, src, n)   \
-                                _memcpy_toio(PCI_FIX_ADDR(dst), src, n)
-
-#ifdef CONFIG_EEH
-#define __do_memcpy_fromio(dst, src, n) \
-                                eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
-#else /* CONFIG_EEH */
-#define __do_memcpy_fromio(dst, src, n) \
-                                _memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
-#endif /* !CONFIG_EEH */
-
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define DEF_PCI_HOOK(x)         x
-#else
-#define DEF_PCI_HOOK(x)         NULL
-#endif
-
-/* Structure containing all the hooks */
-extern struct ppc_pci_io {
-
-#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)    ret (*name) at;
-#define DEF_PCI_AC_NORET(name, at, al, space, aa)       void (*name) at;
-
-#include <asm/io-defs.h>
-
-#undef DEF_PCI_AC_RET
-#undef DEF_PCI_AC_NORET
-
-} ppc_pci_io;
-
-/* The inline wrappers */
-#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)            \
-static inline ret name at                                       \
-{                                                               \
-        if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)              \
-                return ppc_pci_io.name al;                      \
-        return __do_##name al;                                  \
-}
-
-#define DEF_PCI_AC_NORET(name, at, al, space, aa)               \
-static inline void name at                                      \
-{                                                               \
-        if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)              \
-                ppc_pci_io.name al;                             \
-        else                                                    \
-                __do_##name al;                                 \
-}
-
-#include <asm/io-defs.h>
-
-#undef DEF_PCI_AC_RET
-#undef DEF_PCI_AC_NORET
-
-/* Some drivers check for the presence of readq & writeq with
- * a #ifdef, so we make them happy here.
- */
-#ifdef __powerpc64__
-#define readq   readq
-#define writeq  writeq
-#endif
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)    __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)   p
-
-/*
- * We don't do relaxed operations yet, at least not with this semantic
- */
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define readq_relaxed(addr) readq(addr)
-
-#ifdef CONFIG_PPC32
-#define mmiowb()
-#else
-/*
- * Enforce synchronisation of stores vs. spin_unlock
- * (this does it explicitly, though our implementation of spin_unlock
- * does it implicitely too)
- */
-static inline void mmiowb(void)
-{
-        unsigned long tmp;
-
-        __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)"
-        : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync))
-        : "memory");
-}
-#endif /* !CONFIG_PPC32 */
-
-static inline void iosync(void)
-{
-        __asm__ __volatile__ ("sync" : : : "memory");
-}
-
-/* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- * Those are fairly week though. They don't provide a barrier between
- * MMIO and cacheable storage nor do they provide a barrier vs. locks,
- * they only provide barriers between 2 __raw MMIO operations and
- * possibly break write combining.
- */
-#define iobarrier_rw() eieio()
-#define iobarrier_r()  eieio()
-#define iobarrier_w()  eieio()
-
-
-/*
- * output pause versions need a delay at least for the
- * w83c105 ide controller in a p610.
- */
-#define inb_p(port)             inb(port)
-#define outb_p(val, port)       (udelay(1), outb((val), (port)))
-#define inw_p(port)             inw(port)
-#define outw_p(val, port)       (udelay(1), outw((val), (port)))
-#define inl_p(port)             inl(port)
-#define outl_p(val, port)       (udelay(1), outl((val), (port)))
-
-
-#define IO_SPACE_LIMIT ~(0UL)
-
-
-/**
- * ioremap     -   map bus memory into CPU space
- * @address:   bus address of the memory
- * @size:      size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * We provide a few variations of it:
- *
- * * ioremap is the standard one and provides non-cacheable guarded mappings
- *   and can be hooked by the platform via ppc_md
- *
- * * ioremap_flags allows to specify the page flags as an argument and can
- *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
- *   same thing as ioremap_flags.
- *
- * * ioremap_nocache is identical to ioremap
- *
- * * iounmap undoes such a mapping and can be hooked
- *
- * * __ioremap_at (and the pending __iounmap_at) are low level functions to
- *   create hand-made mappings for use only by the PCI code and cannot
- *   currently be hooked. Must be page aligned.
- *
- * * __ioremap is the low level implementation used by ioremap and
- *   ioremap_flags and cannot be hooked (but can be used by a hook on one
- *   of the previous ones)
- *
- * * __iounmap, is the low level implementation used by iounmap and cannot
- *   be hooked (but can be used by a hook on iounmap)
- *
- */
-extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
-                                   unsigned long flags);
-#define ioremap_nocache(addr, size)     ioremap((addr), (size))
-#define ioremap_prot(addr, size, prot)  ioremap_flags((addr), (size), (prot))
-
-extern void iounmap(volatile void __iomem *addr);
-
-extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
-                               unsigned long flags);
-extern void __iounmap(volatile void __iomem *addr);
-
-extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
-                                   unsigned long size, unsigned long flags);
-extern void __iounmap_at(void *ea, unsigned long size);
-
-/*
- * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
- * which needs some additional definitions here. They basically allow PIO
- * space overall to be 1GB. This will work as long as we never try to use
- * iomap to map MMIO below 1GB which should be fine on ppc64
- */
-#define HAVE_ARCH_PIO_SIZE              1
-#define PIO_OFFSET                      0x00000000UL
-#define PIO_MASK                        (FULL_IO_SIZE - 1)
-#define PIO_RESERVED                    (FULL_IO_SIZE)
-
-#define mmio_read16be(addr)             readw_be(addr)
-#define mmio_read32be(addr)             readl_be(addr)
-#define mmio_write16be(val, addr)       writew_be(val, addr)
-#define mmio_write32be(val, addr)       writel_be(val, addr)
-#define mmio_insb(addr, dst, count)     readsb(addr, dst, count)
-#define mmio_insw(addr, dst, count)     readsw(addr, dst, count)
-#define mmio_insl(addr, dst, count)     readsl(addr, dst, count)
-#define mmio_outsb(addr, src, count)    writesb(addr, src, count)
-#define mmio_outsw(addr, src, count)    writesw(addr, src, count)
-#define mmio_outsl(addr, src, count)    writesl(addr, src, count)
-
-/**
- *      virt_to_phys    -       map virtual addresses to physical
- *      @address: address to remap
- *
- *      The returned physical address is the physical (CPU) mapping for
- *      the memory address given. It is only valid to use this function on
- *      addresses directly mapped or allocated via kmalloc.
- *
- *      This function does not give bus mappings for DMA transfers. In
- *      almost all conceivable cases a device driver should not be using
- *      this function
- */
-static inline unsigned long virt_to_phys(volatile void * address)
-{
-        return __pa((unsigned long)address);
-}
-
-/**
- *      phys_to_virt    -       map physical address to virtual
- *      @address: address to remap
- *
- *      The returned virtual address is a current CPU mapping for
- *      the memory address given. It is only valid to use this function on
- *      addresses that have a kernel mapping
- *
- *      This function does not handle bus mappings for DMA transfers. In
- *      almost all conceivable cases a device driver should not be using
- *      this function
- */
-static inline void * phys_to_virt(unsigned long address)
-{
-        return (void *)__va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
-
-/* We do NOT want virtual merging, it would put too much pressure on
- * our iommu allocator. Instead, we want drivers to be smart enough
- * to coalesce sglists that happen to have been mapped in a contiguous
- * way by the iommu
- */
-#define BIO_VMERGE_BOUNDARY     0
-
-/*
- * 32 bits still uses virt_to_bus() for it's implementation of DMA
- * mappings se we have to keep it defined here. We also have some old
- * drivers (shame shame shame) that use bus_to_virt() and haven't been
- * fixed yet so I need to define it here.
- */
-#ifdef CONFIG_PPC32
-
-static inline unsigned long virt_to_bus(volatile void * address)
-{
-        if (address == NULL)
-                return 0;
-        return __pa(address) + PCI_DRAM_OFFSET;
-}
-
-static inline void * bus_to_virt(unsigned long address)
-{
-        if (address == 0)
-                return NULL;
-        return __va(address - PCI_DRAM_OFFSET);
-}
-
-#define page_to_bus(page)       (page_to_phys(page) + PCI_DRAM_OFFSET)
-
-#endif /* CONFIG_PPC32 */
-
-/* access ports */
-#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))
-#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
-
-#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
-#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
-
-#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
-#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
-
-/* Clear and set bits in one shot.  These macros can be used to clear and
- * set multiple bits in a register using a single read-modify-write.  These
- * macros can also be used to set a multiple-bit bit pattern using a mask,
- * by specifying the mask in the 'clear' parameter and the new bit pattern
- * in the 'set' parameter.
- */
-
-#define clrsetbits(type, addr, clear, set) \
-        out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
-
-#ifdef __powerpc64__
-#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
-#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
-#endif
-
-#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
-#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
-
-#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
-#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
-
-#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
-
-void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
-                                size_t size, unsigned long flags);
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_IO_H */
diff --git a/include/asm-powerpc/ioctl.h b/include/asm-powerpc/ioctl.h
deleted file mode 100644
index 57d68304218b..000000000000
--- a/include/asm-powerpc/ioctl.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ASM_POWERPC_IOCTL_H
-#define _ASM_POWERPC_IOCTL_H
-
-#define _IOC_SIZEBITS   13
-#define _IOC_DIRBITS    3
-
-#define _IOC_NONE       1U
-#define _IOC_READ       2U
-#define _IOC_WRITE      4U
-
-#include <asm-generic/ioctl.h>
-
-#endif  /* _ASM_POWERPC_IOCTL_H */
diff --git a/include/asm-powerpc/ioctls.h b/include/asm-powerpc/ioctls.h
deleted file mode 100644
index 279a6229584b..000000000000
--- a/include/asm-powerpc/ioctls.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef _ASM_POWERPC_IOCTLS_H
-#define _ASM_POWERPC_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-#define FIOCLEX         _IO('f', 1)
-#define FIONCLEX        _IO('f', 2)
-#define FIOASYNC        _IOW('f', 125, int)
-#define FIONBIO         _IOW('f', 126, int)
-#define FIONREAD        _IOR('f', 127, int)
-#define TIOCINQ         FIONREAD
-#define FIOQSIZE        _IOR('f', 128, loff_t)
-
-#define TIOCGETP        _IOR('t', 8, struct sgttyb)
-#define TIOCSETP        _IOW('t', 9, struct sgttyb)
-#define TIOCSETN        _IOW('t', 10, struct sgttyb)    /* TIOCSETP wo flush */
-
-#define TIOCSETC        _IOW('t', 17, struct tchars)
-#define TIOCGETC        _IOR('t', 18, struct tchars)
-#define TCGETS          _IOR('t', 19, struct termios)
-#define TCSETS          _IOW('t', 20, struct termios)
-#define TCSETSW         _IOW('t', 21, struct termios)
-#define TCSETSF         _IOW('t', 22, struct termios)
-
-#define TCGETA          _IOR('t', 23, struct termio)
-#define TCSETA          _IOW('t', 24, struct termio)
-#define TCSETAW         _IOW('t', 25, struct termio)
-#define TCSETAF         _IOW('t', 28, struct termio)
-
-#define TCSBRK          _IO('t', 29)
-#define TCXONC          _IO('t', 30)
-#define TCFLSH          _IO('t', 31)
-
-#define TIOCSWINSZ      _IOW('t', 103, struct winsize)
-#define TIOCGWINSZ      _IOR('t', 104, struct winsize)
-#define TIOCSTART       _IO('t', 110)           /* start output, like ^Q */
-#define TIOCSTOP        _IO('t', 111)           /* stop output, like ^S */
-#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
-
-#define TIOCGLTC        _IOR('t', 116, struct ltchars)
-#define TIOCSLTC        _IOW('t', 117, struct ltchars)
-#define TIOCSPGRP       _IOW('t', 118, int)
-#define TIOCGPGRP       _IOR('t', 119, int)
-
-#define TIOCEXCL        0x540C
-#define TIOCNXCL        0x540D
-#define TIOCSCTTY       0x540E
-
-#define TIOCSTI         0x5412
-#define TIOCMGET        0x5415
-#define TIOCMBIS        0x5416
-#define TIOCMBIC        0x5417
-#define TIOCMSET        0x5418
-# define TIOCM_LE       0x001
-# define TIOCM_DTR      0x002
-# define TIOCM_RTS      0x004
-# define TIOCM_ST       0x008
-# define TIOCM_SR       0x010
-# define TIOCM_CTS      0x020
-# define TIOCM_CAR      0x040
-# define TIOCM_RNG      0x080
-# define TIOCM_DSR      0x100
-# define TIOCM_CD       TIOCM_CAR
-# define TIOCM_RI       TIOCM_RNG
-#define TIOCM_OUT1      0x2000
-#define TIOCM_OUT2      0x4000
-#define TIOCM_LOOP      0x8000
-
-#define TIOCGSOFTCAR    0x5419
-#define TIOCSSOFTCAR    0x541A
-#define TIOCLINUX       0x541C
-#define TIOCCONS        0x541D
-#define TIOCGSERIAL     0x541E
-#define TIOCSSERIAL     0x541F
-#define TIOCPKT         0x5420
-# define TIOCPKT_DATA            0
-# define TIOCPKT_FLUSHREAD       1
-# define TIOCPKT_FLUSHWRITE      2
-# define TIOCPKT_STOP            4
-# define TIOCPKT_START           8
-# define TIOCPKT_NOSTOP         16
-# define TIOCPKT_DOSTOP         32
-
-
-#define TIOCNOTTY       0x5422
-#define TIOCSETD        0x5423
-#define TIOCGETD        0x5424
-#define TCSBRKP         0x5425  /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK        0x5427  /* BSD compatibility */
-#define TIOCCBRK        0x5428  /* BSD compatibility */
-#define TIOCGSID        0x5429  /* Return the session ID of FD */
-#define TIOCGPTN        _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK      _IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define TIOCSERCONFIG   0x5453
-#define TIOCSERGWILD    0x5454
-#define TIOCSERSWILD    0x5455
-#define TIOCGLCKTRMIOS  0x5456
-#define TIOCSLCKTRMIOS  0x5457
-#define TIOCSERGSTRUCT  0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-# define TIOCSER_TEMT    0x01   /* Transmitter physically empty */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT      0x545C  /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT     0x545D  /* read serial port inline interrupt counts */
-
-#endif  /* _ASM_POWERPC_IOCTLS_H */
diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h
deleted file mode 100644
index 51ecfef8d843..000000000000
--- a/include/asm-powerpc/iommu.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
- * Rewrite, cleanup:
- * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _ASM_IOMMU_H
-#define _ASM_IOMMU_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/bitops.h>
-#include <asm/machdep.h>
-#include <asm/types.h>
-
-#define IOMMU_PAGE_SHIFT      12
-#define IOMMU_PAGE_SIZE       (ASM_CONST(1) << IOMMU_PAGE_SHIFT)
-#define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
-#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
-
-/* Boot time flags */
-extern int iommu_is_off;
-extern int iommu_force_on;
-
-/* Pure 2^n version of get_order */
-static __inline__ __attribute_const__ int get_iommu_order(unsigned long size)
-{
-        return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1;
-}
-
-
-/*
- * IOMAP_MAX_ORDER defines the largest contiguous block
- * of dma space we can get.  IOMAP_MAX_ORDER = 13
- * allows up to 2**12 pages (4096 * 4096) = 16 MB
- */
-#define IOMAP_MAX_ORDER         13
-
-struct iommu_table {
-        unsigned long  it_busno;     /* Bus number this table belongs to */
-        unsigned long  it_size;      /* Size of iommu table in entries */
-        unsigned long  it_offset;    /* Offset into global table */
-        unsigned long  it_base;      /* mapped address of tce table */
-        unsigned long  it_index;     /* which iommu table this is */
-        unsigned long  it_type;      /* type: PCI or Virtual Bus */
-        unsigned long  it_blocksize; /* Entries in each block (cacheline) */
-        unsigned long  it_hint;      /* Hint for next alloc */
-        unsigned long  it_largehint; /* Hint for large allocs */
-        unsigned long  it_halfpoint; /* Breaking point for small/large allocs */
-        spinlock_t     it_lock;      /* Protects it_map */
-        unsigned long *it_map;       /* A simple allocation bitmap for now */
-};
-
-struct scatterlist;
-
-/* Frees table for an individual device node */
-extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
-
-/* Initializes an iommu_table based in values set in the passed-in
- * structure
- */
-extern struct iommu_table *iommu_init_table(struct iommu_table * tbl,
-                                            int nid);
-
-extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
-                        struct scatterlist *sglist, int nelems,
-                        unsigned long mask, enum dma_data_direction direction,
-                        struct dma_attrs *attrs);
-extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
-                           int nelems, enum dma_data_direction direction,
-                           struct dma_attrs *attrs);
-
-extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
-                                  size_t size, dma_addr_t *dma_handle,
-                                  unsigned long mask, gfp_t flag, int node);
-extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
-                                void *vaddr, dma_addr_t dma_handle);
-extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
-                                   void *vaddr, size_t size, unsigned long mask,
-                                   enum dma_data_direction direction,
-                                   struct dma_attrs *attrs);
-extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
-                               size_t size, enum dma_data_direction direction,
-                               struct dma_attrs *attrs);
-
-extern void iommu_init_early_pSeries(void);
-extern void iommu_init_early_iSeries(void);
-extern void iommu_init_early_dart(void);
-extern void iommu_init_early_pasemi(void);
-
-#ifdef CONFIG_PCI
-extern void pci_iommu_init(void);
-extern void pci_direct_iommu_init(void);
-#else
-static inline void pci_iommu_init(void) { }
-#endif
-
-extern void alloc_dart_table(void);
-#if defined(CONFIG_PPC64) && defined(CONFIG_PM)
-static inline void iommu_save(void)
-{
-        if (ppc_md.iommu_save)
-                ppc_md.iommu_save();
-}
-
-static inline void iommu_restore(void)
-{
-        if (ppc_md.iommu_restore)
-                ppc_md.iommu_restore();
-}
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_IOMMU_H */
diff --git a/include/asm-powerpc/ipcbuf.h b/include/asm-powerpc/ipcbuf.h
deleted file mode 100644
index 2c3e1d94db1d..000000000000
--- a/include/asm-powerpc/ipcbuf.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _ASM_POWERPC_IPCBUF_H
-#define _ASM_POWERPC_IPCBUF_H
-
-/*
- * The ipc64_perm structure for the powerpc is identical to
- * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the
- * kernel.  Note extra padding because this structure is passed back
- * and forth between kernel and user space.  Pad space is left for:
- *      - 1 32-bit value to fill up for 8-byte alignment
- *      - 2 miscellaneous 64-bit values
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-
-struct ipc64_perm
-{
-        __kernel_key_t  key;
-        __kernel_uid_t  uid;
-        __kernel_gid_t  gid;
-        __kernel_uid_t  cuid;
-        __kernel_gid_t  cgid;
-        __kernel_mode_t mode;
-        unsigned int    seq;
-        unsigned int    __pad1;
-        unsigned long long __unused1;
-        unsigned long long __unused2;
-};
-
-#endif /* _ASM_POWERPC_IPCBUF_H */
diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h
deleted file mode 100644
index 8ff08be00146..000000000000
--- a/include/asm-powerpc/ipic.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * include/asm-powerpc/ipic.h
- *
- * IPIC external definitions and structure.
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_IPIC_H__
-#define __ASM_IPIC_H__
-
-#include <linux/irq.h>
-
-/* Flags when we init the IPIC */
-#define IPIC_SPREADMODE_GRP_A   0x00000001
-#define IPIC_SPREADMODE_GRP_B   0x00000002
-#define IPIC_SPREADMODE_GRP_C   0x00000004
-#define IPIC_SPREADMODE_GRP_D   0x00000008
-#define IPIC_SPREADMODE_MIX_A   0x00000010
-#define IPIC_SPREADMODE_MIX_B   0x00000020
-#define IPIC_DISABLE_MCP_OUT    0x00000040
-#define IPIC_IRQ0_MCP           0x00000080
-
-/* IPIC registers offsets */
-#define IPIC_SICFR      0x00    /* System Global Interrupt Configuration Register */
-#define IPIC_SIVCR      0x04    /* System Global Interrupt Vector Register */
-#define IPIC_SIPNR_H    0x08    /* System Internal Interrupt Pending Register (HIGH) */
-#define IPIC_SIPNR_L    0x0C    /* System Internal Interrupt Pending Register (LOW) */
-#define IPIC_SIPRR_A    0x10    /* System Internal Interrupt group A Priority Register */
-#define IPIC_SIPRR_B    0x14    /* System Internal Interrupt group B Priority Register */
-#define IPIC_SIPRR_C    0x18    /* System Internal Interrupt group C Priority Register */
-#define IPIC_SIPRR_D    0x1C    /* System Internal Interrupt group D Priority Register */
-#define IPIC_SIMSR_H    0x20    /* System Internal Interrupt Mask Register (HIGH) */
-#define IPIC_SIMSR_L    0x24    /* System Internal Interrupt Mask Register (LOW) */
-#define IPIC_SICNR      0x28    /* System Internal Interrupt Control Register */
-#define IPIC_SEPNR      0x2C    /* System External Interrupt Pending Register */
-#define IPIC_SMPRR_A    0x30    /* System Mixed Interrupt group A Priority Register */
-#define IPIC_SMPRR_B    0x34    /* System Mixed Interrupt group B Priority Register */
-#define IPIC_SEMSR      0x38    /* System External Interrupt Mask Register */
-#define IPIC_SECNR      0x3C    /* System External Interrupt Control Register */
-#define IPIC_SERSR      0x40    /* System Error Status Register */
-#define IPIC_SERMR      0x44    /* System Error Mask Register */
-#define IPIC_SERCR      0x48    /* System Error Control Register */
-#define IPIC_SIFCR_H    0x50    /* System Internal Interrupt Force Register (HIGH) */
-#define IPIC_SIFCR_L    0x54    /* System Internal Interrupt Force Register (LOW) */
-#define IPIC_SEFCR      0x58    /* System External Interrupt Force Register */
-#define IPIC_SERFR      0x5C    /* System Error Force Register */
-#define IPIC_SCVCR      0x60    /* System Critical Interrupt Vector Register */
-#define IPIC_SMVCR      0x64    /* System Management Interrupt Vector Register */
-
-enum ipic_prio_grp {
-        IPIC_INT_GRP_A = IPIC_SIPRR_A,
-        IPIC_INT_GRP_D = IPIC_SIPRR_D,
-        IPIC_MIX_GRP_A = IPIC_SMPRR_A,
-        IPIC_MIX_GRP_B = IPIC_SMPRR_B,
-};
-
-enum ipic_mcp_irq {
-        IPIC_MCP_IRQ0 = 0,
-        IPIC_MCP_WDT  = 1,
-        IPIC_MCP_SBA  = 2,
-        IPIC_MCP_PCI1 = 5,
-        IPIC_MCP_PCI2 = 6,
-        IPIC_MCP_MU   = 7,
-};
-
-extern int ipic_set_priority(unsigned int irq, unsigned int priority);
-extern void ipic_set_highest_priority(unsigned int irq);
-extern void ipic_set_default_priority(void);
-extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq);
-extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
-extern u32 ipic_get_mcp_status(void);
-extern void ipic_clear_mcp_status(u32 mask);
-
-#ifdef CONFIG_PPC_MERGE
-extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
-extern unsigned int ipic_get_irq(void);
-#else
-extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
-                unsigned int irq_offset,
-                unsigned char *senses, unsigned int senses_count);
-extern int ipic_get_irq(void);
-#endif
-
-#endif /* __ASM_IPIC_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
deleted file mode 100644
index 1ef8e304e0ea..000000000000
--- a/include/asm-powerpc/irq.h
+++ /dev/null
@@ -1,654 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _ASM_POWERPC_IRQ_H
-#define _ASM_POWERPC_IRQ_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/threads.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-
-#include <asm/types.h>
-#include <asm/atomic.h>
-
-
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
-        for ((i) = 0; (i) < NR_IRQS; ++(i))
-
-extern atomic_t ppc_n_lost_interrupts;
-
-#ifdef CONFIG_PPC_MERGE
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ                  (0)
-
-/* This is a special irq number to return from get_irq() to tell that
- * no interrupt happened _and_ ignore it (don't count it as bad). Some
- * platforms like iSeries rely on that.
- */
-#define NO_IRQ_IGNORE           ((unsigned int)-1)
-
-/* Total number of virq in the platform (make it a CONFIG_* option ? */
-#define NR_IRQS         512
-
-/* Number of irqs reserved for the legacy controller */
-#define NUM_ISA_INTERRUPTS      16
-
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-/* Interrupt controller "host" data structure. This could be defined as a
- * irq domain controller. That is, it handles the mapping between hardware
- * and virtual interrupt numbers for a given interrupt domain. The host
- * structure is generally created by the PIC code for a given PIC instance
- * (though a host can cover more than one PIC if they have a flat number
- * model). It's the host callbacks that are responsible for setting the
- * irq_chip on a given irq_desc after it's been mapped.
- *
- * The host code and data structures are fairly agnostic to the fact that
- * we use an open firmware device-tree. We do have references to struct
- * device_node in two places: in irq_find_host() to find the host matching
- * a given interrupt controller node, and of course as an argument to its
- * counterpart host->ops->match() callback. However, those are treated as
- * generic pointers by the core and the fact that it's actually a device-node
- * pointer is purely a convention between callers and implementation. This
- * code could thus be used on other architectures by replacing those two
- * by some sort of arch-specific void * "token" used to identify interrupt
- * controllers.
- */
-struct irq_host;
-struct radix_tree_root;
-
-/* Functions below are provided by the host and called whenever a new mapping
- * is created or an old mapping is disposed. The host can then proceed to
- * whatever internal data structures management is required. It also needs
- * to setup the irq_desc when returning from map().
- */
-struct irq_host_ops {
-        /* Match an interrupt controller device node to a host, returns
-         * 1 on a match
-         */
-        int (*match)(struct irq_host *h, struct device_node *node);
-
-        /* Create or update a mapping between a virtual irq number and a hw
-         * irq number. This is called only once for a given mapping.
-         */
-        int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
-        /* Dispose of such a mapping */
-        void (*unmap)(struct irq_host *h, unsigned int virq);
-
-        /* Update of such a mapping  */
-        void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
-        /* Translate device-tree interrupt specifier from raw format coming
-         * from the firmware to a irq_hw_number_t (interrupt line number) and
-         * type (sense) that can be passed to set_irq_type(). In the absence
-         * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
-         * will return the hw number in the first cell and IRQ_TYPE_NONE for
-         * the type (which amount to keeping whatever default value the
-         * interrupt controller has for that line)
-         */
-        int (*xlate)(struct irq_host *h, struct device_node *ctrler,
-                     u32 *intspec, unsigned int intsize,
-                     irq_hw_number_t *out_hwirq, unsigned int *out_type);
-};
-
-struct irq_host {
-        struct list_head        link;
-
-        /* type of reverse mapping technique */
-        unsigned int            revmap_type;
-#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
-#define IRQ_HOST_MAP_NOMAP      1 /* no fast reverse mapping */
-#define IRQ_HOST_MAP_LINEAR     2 /* linear map of interrupts */
-#define IRQ_HOST_MAP_TREE       3 /* radix tree */
-        union {
-                struct {
-                        unsigned int size;
-                        unsigned int *revmap;
-                } linear;
-                struct radix_tree_root tree;
-        } revmap_data;
-        struct irq_host_ops     *ops;
-        void                    *host_data;
-        irq_hw_number_t         inval_irq;
-
-        /* Optional device node pointer */
-        struct device_node      *of_node;
-};
-
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
-        irq_hw_number_t hwirq;
-        struct irq_host *host;
-};
-
-extern struct irq_map_entry irq_map[NR_IRQS];
-
-extern irq_hw_number_t virq_to_hw(unsigned int virq);
-
-/**
- * irq_alloc_host - Allocate a new irq_host data structure
- * @of_node: optional device-tree node of the interrupt controller
- * @revmap_type: type of reverse mapping to use
- * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
- * @ops: map/unmap host callbacks
- * @inval_irq: provide a hw number in that host space that is always invalid
- *
- * Allocates and initialize and irq_host structure. Note that in the case of
- * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
- * for all legacy interrupts except 0 (which is always the invalid irq for
- * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
- * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
- * later during boot automatically (the reverse mapping will use the slow path
- * until that happens).
- */
-extern struct irq_host *irq_alloc_host(struct device_node *of_node,
-                                       unsigned int revmap_type,
-                                       unsigned int revmap_arg,
-                                       struct irq_host_ops *ops,
-                                       irq_hw_number_t inval_irq);
-
-
-/**
- * irq_find_host - Locates a host for a given device node
- * @node: device-tree node of the interrupt controller
- */
-extern struct irq_host *irq_find_host(struct device_node *node);
-
-
-/**
- * irq_set_default_host - Set a "default" host
- * @host: default host pointer
- *
- * For convenience, it's possible to set a "default" host that will be used
- * whenever NULL is passed to irq_create_mapping(). It makes life easier for
- * platforms that want to manipulate a few hard coded interrupt numbers that
- * aren't properly represented in the device-tree.
- */
-extern void irq_set_default_host(struct irq_host *host);
-
-
-/**
- * irq_set_virq_count - Set the maximum number of virt irqs
- * @count: number of linux virtual irqs, capped with NR_IRQS
- *
- * This is mainly for use by platforms like iSeries who want to program
- * the virtual irq number in the controller to avoid the reverse mapping
- */
-extern void irq_set_virq_count(unsigned int count);
-
-
-/**
- * irq_create_mapping - Map a hardware interrupt into linux virq space
- * @host: host owning this hardware interrupt or NULL for default host
- * @hwirq: hardware irq number in that host space
- *
- * Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number.
- * If the sense/trigger is to be specified, set_irq_type() should be called
- * on the number returned from that call.
- */
-extern unsigned int irq_create_mapping(struct irq_host *host,
-                                       irq_hw_number_t hwirq);
-
-
-/**
- * irq_dispose_mapping - Unmap an interrupt
- * @virq: linux virq number of the interrupt to unmap
- */
-extern void irq_dispose_mapping(unsigned int virq);
-
-/**
- * irq_find_mapping - Find a linux virq from an hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a slow path, for use by generic code. It's expected that an
- * irq controller implementation directly calls the appropriate low level
- * mapping function.
- */
-extern unsigned int irq_find_mapping(struct irq_host *host,
-                                     irq_hw_number_t hwirq);
-
-/**
- * irq_create_direct_mapping - Allocate a virq for direct mapping
- * @host: host to allocate the virq for or NULL for default host
- *
- * This routine is used for irq controllers which can choose the hardware
- * interrupt numbers they generate. In such a case it's simplest to use
- * the linux virq as the hardware interrupt number.
- */
-extern unsigned int irq_create_direct_mapping(struct irq_host *host);
-
-/**
- * irq_radix_revmap - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses radix tree
- * revmaps
- */
-extern unsigned int irq_radix_revmap(struct irq_host *host,
-                                     irq_hw_number_t hwirq);
-
-/**
- * irq_linear_revmap - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses linear
- * revmaps. It does fallback to the slow path if the revmap doesn't exist
- * yet and will create the revmap entry with appropriate locking
- */
-
-extern unsigned int irq_linear_revmap(struct irq_host *host,
-                                      irq_hw_number_t hwirq);
-
-
-
-/**
- * irq_alloc_virt - Allocate virtual irq numbers
- * @host: host owning these new virtual irqs
- * @count: number of consecutive numbers to allocate
- * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
- *
- * This is a low level function that is used internally by irq_create_mapping()
- * and that can be used by some irq controllers implementations for things
- * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
- */
-extern unsigned int irq_alloc_virt(struct irq_host *host,
-                                   unsigned int count,
-                                   unsigned int hint);
-
-/**
- * irq_free_virt - Free virtual irq numbers
- * @virq: virtual irq number of the first interrupt to free
- * @count: number of interrupts to free
- *
- * This function is the opposite of irq_alloc_virt. It will not clear reverse
- * maps, this should be done previously by unmap'ing the interrupt. In fact,
- * all interrupts covered by the range being freed should have been unmapped
- * prior to calling this.
- */
-extern void irq_free_virt(unsigned int virq, unsigned int count);
-
-
-/* -- OF helpers -- */
-
-/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
- * @controller: Device node of the interrupt controller
- * @inspec: Interrupt specifier from the device-tree
- * @intsize: Size of the interrupt specifier from the device-tree
- *
- * This function is identical to irq_create_mapping except that it takes
- * as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions.
- */
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
-                                          u32 *intspec, unsigned int intsize);
-
-
-/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
- * @device: Device node of the device whose interrupt is to be mapped
- * @index: Index of the interrupt to map
- *
- * This function is a wrapper that chains of_irq_map_one() and
- * irq_create_of_mapping() to make things easier to callers
- */
-extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
-
-/* -- End OF helpers -- */
-
-/**
- * irq_early_init - Init irq remapping subsystem
- */
-extern void irq_early_init(void);
-
-static __inline__ int irq_canonicalize(int irq)
-{
-        return irq;
-}
-
-
-#else /* CONFIG_PPC_MERGE */
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ                  (-1)
-#define NO_IRQ_IGNORE           (-2)
-
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK          0x1
-#define IRQ_SENSE_LEVEL         0x1     /* interrupt on active level */
-#define IRQ_SENSE_EDGE          0x0     /* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK       0x2
-#define IRQ_POLARITY_POSITIVE   0x2     /* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE   0x0     /* low level or high->low edge */
-
-
-#if defined(CONFIG_40x)
-#include <asm/ibm4xx.h>
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#ifndef UIC_WIDTH /* Number of interrupts per device */
-#define UIC_WIDTH 32
-#endif
-
-#ifndef NR_UICS /* number  of UIC devices */
-#define NR_UICS 1
-#endif
-
-#if defined (CONFIG_403)
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#define NR_AIC_IRQS 32
-#define NR_IRQS  (NR_AIC_IRQS + NR_BOARD_IRQS)
-
-#elif !defined (CONFIG_403)
-
-/*
- *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
- * possible interrupts as well. There are seven, configurable external
- * interrupt pins and there are 17 internal interrupts for the on-chip
- * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
- *
- */
-
-
-#define NR_UIC_IRQS UIC_WIDTH
-#define NR_IRQS         ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-#endif
-
-#elif defined(CONFIG_44x)
-#include <asm/ibm44x.h>
-
-#define NR_UIC_IRQS     32
-#define NR_IRQS         ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-
-#elif defined(CONFIG_8xx)
-
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc8xx.h>
-
-/* The MPC8xx cores have 16 possible interrupts.  There are eight
- * possible level sensitive interrupts assigned and generated internally
- * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
- * There are eight external interrupts (IRQs) that can be configured
- * as either level or edge sensitive.
- *
- * On some implementations, there is also the possibility of an 8259
- * through the PCI and PCI-ISA bridges.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * and 8259 interrupt controllers so that we can uniquely identify
- * any interrupt source with a single integer.
- */
-#define NR_SIU_INTS     16
-#define NR_CPM_INTS     32
-#ifndef NR_8259_INTS
-#define NR_8259_INTS 0
-#endif
-
-#define SIU_IRQ_OFFSET          0
-#define CPM_IRQ_OFFSET          (SIU_IRQ_OFFSET + NR_SIU_INTS)
-#define I8259_IRQ_OFFSET        (CPM_IRQ_OFFSET + NR_CPM_INTS)
-
-#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* These values must be zero-based and map 1:1 with the SIU configuration.
- * They are used throughout the 8xx I/O subsystem to generate
- * interrupt masks, flags, and other control patterns.  This is why the
- * current kernel assumption of the 8259 as the base controller is such
- * a pain in the butt.
- */
-#define SIU_IRQ0        (0)     /* Highest priority */
-#define SIU_LEVEL0      (1)
-#define SIU_IRQ1        (2)
-#define SIU_LEVEL1      (3)
-#define SIU_IRQ2        (4)
-#define SIU_LEVEL2      (5)
-#define SIU_IRQ3        (6)
-#define SIU_LEVEL3      (7)
-#define SIU_IRQ4        (8)
-#define SIU_LEVEL4      (9)
-#define SIU_IRQ5        (10)
-#define SIU_LEVEL5      (11)
-#define SIU_IRQ6        (12)
-#define SIU_LEVEL6      (13)
-#define SIU_IRQ7        (14)
-#define SIU_LEVEL7      (15)
-
-#define MPC8xx_INT_FEC1         SIU_LEVEL1
-#define MPC8xx_INT_FEC2         SIU_LEVEL3
-
-#define MPC8xx_INT_SCC1         (CPM_IRQ_OFFSET + CPMVEC_SCC1)
-#define MPC8xx_INT_SCC2         (CPM_IRQ_OFFSET + CPMVEC_SCC2)
-#define MPC8xx_INT_SCC3         (CPM_IRQ_OFFSET + CPMVEC_SCC3)
-#define MPC8xx_INT_SCC4         (CPM_IRQ_OFFSET + CPMVEC_SCC4)
-#define MPC8xx_INT_SMC1         (CPM_IRQ_OFFSET + CPMVEC_SMC1)
-#define MPC8xx_INT_SMC2         (CPM_IRQ_OFFSET + CPMVEC_SMC2)
-
-/* The internal interrupts we can configure as we see fit.
- * My personal preference is CPM at level 2, which puts it above the
- * MBX PCI/ISA/IDE interrupts.
- */
-#ifndef PIT_INTERRUPT
-#define PIT_INTERRUPT           SIU_LEVEL0
-#endif
-#ifndef CPM_INTERRUPT
-#define CPM_INTERRUPT           SIU_LEVEL2
-#endif
-#ifndef PCMCIA_INTERRUPT
-#define PCMCIA_INTERRUPT        SIU_LEVEL6
-#endif
-#ifndef DEC_INTERRUPT
-#define DEC_INTERRUPT           SIU_LEVEL7
-#endif
-
-/* Some internal interrupt registers use an 8-bit mask for the interrupt
- * level instead of a number.
- */
-#define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
-
-#else /* CONFIG_40x + CONFIG_8xx */
-/*
- * this is the # irq's for all ppc arch's (pmac/chrp/prep)
- * so it is the max of them all
- */
-#define NR_IRQS                 256
-#define __DO_IRQ_CANON  1
-
-#ifndef CONFIG_8260
-
-#define NUM_8259_INTERRUPTS     16
-
-#else /* CONFIG_8260 */
-
-/* The 8260 has an internal interrupt controller with a maximum of
- * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
- * Don't be confused by the 8260 documentation where they list an
- * "interrupt number" and "interrupt vector".  We are only interested
- * in the interrupt vector.  There are "reserved" holes where the
- * vector number increases, but the interrupt number in the table does not.
- * (Document errata updates have fixed this...make sure you have up to
- * date processor documentation -- Dan).
- */
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET  0
-#endif
-
-#define NR_CPM_INTS     64
-
-#define SIU_INT_ERROR           ((uint)0x00 + CPM_IRQ_OFFSET)
-#define SIU_INT_I2C             ((uint)0x01 + CPM_IRQ_OFFSET)
-#define SIU_INT_SPI             ((uint)0x02 + CPM_IRQ_OFFSET)
-#define SIU_INT_RISC            ((uint)0x03 + CPM_IRQ_OFFSET)
-#define SIU_INT_SMC1            ((uint)0x04 + CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2            ((uint)0x05 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA1           ((uint)0x06 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA2           ((uint)0x07 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA3           ((uint)0x08 + CPM_IRQ_OFFSET)
-#define SIU_INT_IDMA4           ((uint)0x09 + CPM_IRQ_OFFSET)
-#define SIU_INT_SDMA            ((uint)0x0a + CPM_IRQ_OFFSET)
-#define SIU_INT_USB             ((uint)0x0b + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER1          ((uint)0x0c + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER2          ((uint)0x0d + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER3          ((uint)0x0e + CPM_IRQ_OFFSET)
-#define SIU_INT_TIMER4          ((uint)0x0f + CPM_IRQ_OFFSET)
-#define SIU_INT_TMCNT           ((uint)0x10 + CPM_IRQ_OFFSET)
-#define SIU_INT_PIT             ((uint)0x11 + CPM_IRQ_OFFSET)
-#define SIU_INT_PCI             ((uint)0x12 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ1            ((uint)0x13 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ2            ((uint)0x14 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ3            ((uint)0x15 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ4            ((uint)0x16 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ5            ((uint)0x17 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ6            ((uint)0x18 + CPM_IRQ_OFFSET)
-#define SIU_INT_IRQ7            ((uint)0x19 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC1            ((uint)0x20 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC2            ((uint)0x21 + CPM_IRQ_OFFSET)
-#define SIU_INT_FCC3            ((uint)0x22 + CPM_IRQ_OFFSET)
-#define SIU_INT_MCC1            ((uint)0x24 + CPM_IRQ_OFFSET)
-#define SIU_INT_MCC2            ((uint)0x25 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC1            ((uint)0x28 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC2            ((uint)0x29 + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC3            ((uint)0x2a + CPM_IRQ_OFFSET)
-#define SIU_INT_SCC4            ((uint)0x2b + CPM_IRQ_OFFSET)
-#define SIU_INT_PC15            ((uint)0x30 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC14            ((uint)0x31 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC13            ((uint)0x32 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC12            ((uint)0x33 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC11            ((uint)0x34 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC10            ((uint)0x35 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC9             ((uint)0x36 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC8             ((uint)0x37 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC7             ((uint)0x38 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC6             ((uint)0x39 + CPM_IRQ_OFFSET)
-#define SIU_INT_PC5             ((uint)0x3a + CPM_IRQ_OFFSET)
-#define SIU_INT_PC4             ((uint)0x3b + CPM_IRQ_OFFSET)
-#define SIU_INT_PC3             ((uint)0x3c + CPM_IRQ_OFFSET)
-#define SIU_INT_PC2             ((uint)0x3d + CPM_IRQ_OFFSET)
-#define SIU_INT_PC1             ((uint)0x3e + CPM_IRQ_OFFSET)
-#define SIU_INT_PC0             ((uint)0x3f + CPM_IRQ_OFFSET)
-
-#endif /* CONFIG_8260 */
-
-#endif /* Whatever way too big #ifdef */
-
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-/* pedantic: these are long because they are used with set_bit --RR */
-extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-
-/*
- * Because many systems have two overlapping names spaces for
- * interrupts (ISA and XICS for example), and the ISA interrupts
- * have historically not been easy to renumber, we allow ISA
- * interrupts to take values 0 - 15, and shift up the remaining
- * interrupts by 0x10.
- */
-#define NUM_ISA_INTERRUPTS      0x10
-extern int __irq_offset_value;
-
-static inline int irq_offset_up(int irq)
-{
-        return(irq + __irq_offset_value);
-}
-
-static inline int irq_offset_down(int irq)
-{
-        return(irq - __irq_offset_value);
-}
-
-static inline int irq_offset_value(void)
-{
-        return __irq_offset_value;
-}
-
-#ifdef __DO_IRQ_CANON
-extern int ppc_do_canonicalize_irqs;
-#else
-#define ppc_do_canonicalize_irqs        0
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
-        if (ppc_do_canonicalize_irqs && irq == 2)
-                irq = 9;
-        return irq;
-}
-#endif /* CONFIG_PPC_MERGE */
-
-extern int distribute_irqs;
-
-struct irqaction;
-struct pt_regs;
-
-#define __ARCH_HAS_DO_SOFTIRQ
-
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-/*
- * Per-cpu stacks for handling critical, debug and machine check
- * level interrupts.
- */
-extern struct thread_info *critirq_ctx[NR_CPUS];
-extern struct thread_info *dbgirq_ctx[NR_CPUS];
-extern struct thread_info *mcheckirq_ctx[NR_CPUS];
-extern void exc_lvl_ctx_init(void);
-#else
-#define exc_lvl_ctx_init()
-#endif
-
-#ifdef CONFIG_IRQSTACKS
-/*
- * Per-cpu stacks for handling hard and soft interrupts.
- */
-extern struct thread_info *hardirq_ctx[NR_CPUS];
-extern struct thread_info *softirq_ctx[NR_CPUS];
-
-extern void irq_ctx_init(void);
-extern void call_do_softirq(struct thread_info *tp);
-extern int call_handle_irq(int irq, void *p1,
-                           struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
-extern void do_IRQ(struct pt_regs *regs);
-
-#endif /* _ASM_IRQ_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq_regs.h b/include/asm-powerpc/irq_regs.h
deleted file mode 100644
index ba94b51a0a70..000000000000
--- a/include/asm-powerpc/irq_regs.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#include <asm-generic/irq_regs.h>
-
diff --git a/include/asm-powerpc/irqflags.h b/include/asm-powerpc/irqflags.h
deleted file mode 100644
index cc6fdba33660..000000000000
--- a/include/asm-powerpc/irqflags.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-powerpc/irqflags.h
- *
- * IRQ flags handling
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#ifndef __ASSEMBLY__
-/*
- * Get definitions for raw_local_save_flags(x), etc.
- */
-#include <asm-powerpc/hw_irq.h>
-
-#else
-#ifdef CONFIG_TRACE_IRQFLAGS
-/*
- * Most of the CPU's IRQ-state tracing is done from assembly code; we
- * have to call a C function so call a wrapper that saves all the
- * C-clobbered registers.
- */
-#define TRACE_ENABLE_INTS       bl .trace_hardirqs_on
-#define TRACE_DISABLE_INTS      bl .trace_hardirqs_off
-#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)  \
-        cmpdi   en, 0;                          \
-        bne     95f;                            \
-        stb     en,PACASOFTIRQEN(r13);          \
-        bl      .trace_hardirqs_off;            \
-        b       skip;                           \
-95:     bl      .trace_hardirqs_on;             \
-        li      en,1;
-#define TRACE_AND_RESTORE_IRQ(en)               \
-        TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);  \
-96:     stb     en,PACASOFTIRQEN(r13)
-#else
-#define TRACE_ENABLE_INTS
-#define TRACE_DISABLE_INTS
-#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
-#define TRACE_AND_RESTORE_IRQ(en)               \
-        stb     en,PACASOFTIRQEN(r13)
-#endif
-#endif
-
-#endif
diff --git a/include/asm-powerpc/iseries/alpaca.h b/include/asm-powerpc/iseries/alpaca.h
deleted file mode 100644
index c0cce6727a69..000000000000
--- a/include/asm-powerpc/iseries/alpaca.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright © 2008  Stephen Rothwell IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
-#define _ASM_POWERPC_ISERIES_ALPACA_H
-
-/*
- * This is the part of the paca that the iSeries hypervisor
- * needs to be statically initialised. Immediately after boot
- * we switch to the normal Linux paca.
- */
-struct alpaca {
-        struct lppaca *lppaca_ptr;      /* Pointer to LpPaca for PLIC */
-        const void *reg_save_ptr;       /* Pointer to LpRegSave for PLIC */
-};
-
-#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */
diff --git a/include/asm-powerpc/iseries/hv_call.h b/include/asm-powerpc/iseries/hv_call.h
deleted file mode 100644
index 162d653ad51f..000000000000
--- a/include/asm-powerpc/iseries/hv_call.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file contains the "hypervisor call" interface which is used to
- * drive the hypervisor from the OS.
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H
-#define _ASM_POWERPC_ISERIES_HV_CALL_H
-
-#include <asm/iseries/hv_call_sc.h>
-#include <asm/iseries/hv_types.h>
-#include <asm/paca.h>
-
-/* Type of yield for HvCallBaseYieldProcessor */
-#define HvCall_YieldTimed       0       /* Yield until specified time (tb) */
-#define HvCall_YieldToActive    1       /* Yield until all active procs have run */
-#define HvCall_YieldToProc      2       /* Yield until the specified processor has run */
-
-/* interrupt masks for setEnabledInterrupts */
-#define HvCall_MaskIPI          0x00000001
-#define HvCall_MaskLpEvent      0x00000002
-#define HvCall_MaskLpProd       0x00000004
-#define HvCall_MaskTimeout      0x00000008
-
-/* Log buffer formats */
-#define HvCall_LogBuffer_ASCII          0
-#define HvCall_LogBuffer_EBCDIC         1
-
-#define HvCallBaseAckDeferredInts                       HvCallBase +  0
-#define HvCallBaseCpmPowerOff                           HvCallBase +  1
-#define HvCallBaseGetHwPatch                            HvCallBase +  2
-#define HvCallBaseReIplSpAttn                           HvCallBase +  3
-#define HvCallBaseSetASR                                HvCallBase +  4
-#define HvCallBaseSetASRAndRfi                          HvCallBase +  5
-#define HvCallBaseSetIMR                                HvCallBase +  6
-#define HvCallBaseSendIPI                               HvCallBase +  7
-#define HvCallBaseTerminateMachine                      HvCallBase +  8
-#define HvCallBaseTerminateMachineSrc                   HvCallBase +  9
-#define HvCallBaseProcessPlicInterrupts                 HvCallBase + 10
-#define HvCallBaseIsPrimaryCpmOrMsdIpl                  HvCallBase + 11
-#define HvCallBaseSetVirtualSIT                         HvCallBase + 12
-#define HvCallBaseVaryOffThisProcessor                  HvCallBase + 13
-#define HvCallBaseVaryOffMemoryChunk                    HvCallBase + 14
-#define HvCallBaseVaryOffInteractivePercentage          HvCallBase + 15
-#define HvCallBaseSendLpProd                            HvCallBase + 16
-#define HvCallBaseSetEnabledInterrupts                  HvCallBase + 17
-#define HvCallBaseYieldProcessor                        HvCallBase + 18
-#define HvCallBaseVaryOffSharedProcUnits                HvCallBase + 19
-#define HvCallBaseSetVirtualDecr                        HvCallBase + 20
-#define HvCallBaseClearLogBuffer                        HvCallBase + 21
-#define HvCallBaseGetLogBufferCodePage                  HvCallBase + 22
-#define HvCallBaseGetLogBufferFormat                    HvCallBase + 23
-#define HvCallBaseGetLogBufferLength                    HvCallBase + 24
-#define HvCallBaseReadLogBuffer                         HvCallBase + 25
-#define HvCallBaseSetLogBufferFormatAndCodePage         HvCallBase + 26
-#define HvCallBaseWriteLogBuffer                        HvCallBase + 27
-#define HvCallBaseRouter28                              HvCallBase + 28
-#define HvCallBaseRouter29                              HvCallBase + 29
-#define HvCallBaseRouter30                              HvCallBase + 30
-#define HvCallBaseSetDebugBus                           HvCallBase + 31
-
-#define HvCallCcSetDABR                                 HvCallCc + 7
-
-static inline void HvCall_setVirtualDecr(void)
-{
-        /*
-         * Ignore any error return codes - most likely means that the
-         * target value for the LP has been increased and this vary off
-         * would bring us below the new target.
-         */
-        HvCall0(HvCallBaseSetVirtualDecr);
-}
-
-static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm)
-{
-        HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm);
-}
-
-static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts)
-{
-        HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts);
-}
-
-static inline void HvCall_setLogBufferFormatAndCodepage(int format,
-                u32 codePage)
-{
-        HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage);
-}
-
-extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen);
-
-static inline void HvCall_sendIPI(struct paca_struct *targetPaca)
-{
-        HvCall1(HvCallBaseSendIPI, targetPaca->paca_index);
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */
diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/include/asm-powerpc/iseries/hv_call_event.h
deleted file mode 100644
index cc029d388e11..000000000000
--- a/include/asm-powerpc/iseries/hv_call_event.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file contains the "hypervisor call" interface which is used to
- * drive the hypervisor from the OS.
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
-#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
-
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/iseries/hv_call_sc.h>
-#include <asm/iseries/hv_types.h>
-#include <asm/abs_addr.h>
-
-struct HvLpEvent;
-
-typedef u8 HvLpEvent_Type;
-typedef u8 HvLpEvent_AckInd;
-typedef u8 HvLpEvent_AckType;
-
-typedef u8 HvLpDma_Direction;
-typedef u8 HvLpDma_AddressType;
-
-typedef u64 HvLpEvent_Rc;
-typedef u64 HvLpDma_Rc;
-
-#define HvCallEventAckLpEvent                           HvCallEvent +  0
-#define HvCallEventCancelLpEvent                        HvCallEvent +  1
-#define HvCallEventCloseLpEventPath                     HvCallEvent +  2
-#define HvCallEventDmaBufList                           HvCallEvent +  3
-#define HvCallEventDmaSingle                            HvCallEvent +  4
-#define HvCallEventDmaToSp                              HvCallEvent +  5
-#define HvCallEventGetOverflowLpEvents                  HvCallEvent +  6
-#define HvCallEventGetSourceLpInstanceId                HvCallEvent +  7
-#define HvCallEventGetTargetLpInstanceId                HvCallEvent +  8
-#define HvCallEventOpenLpEventPath                      HvCallEvent +  9
-#define HvCallEventSetLpEventStack                      HvCallEvent + 10
-#define HvCallEventSignalLpEvent                        HvCallEvent + 11
-#define HvCallEventSignalLpEventParms                   HvCallEvent + 12
-#define HvCallEventSetInterLpQueueIndex                 HvCallEvent + 13
-#define HvCallEventSetLpEventQueueInterruptProc         HvCallEvent + 14
-#define HvCallEventRouter15                             HvCallEvent + 15
-
-static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex)
-{
-        HvCall1(HvCallEventGetOverflowLpEvents, queueIndex);
-}
-
-static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex)
-{
-        HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex);
-}
-
-static inline void HvCallEvent_setLpEventStack(u8 queueIndex,
-                char *eventStackAddr, u32 eventStackSize)
-{
-        HvCall3(HvCallEventSetLpEventStack, queueIndex,
-                        virt_to_abs(eventStackAddr), eventStackSize);
-}
-
-static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex,
-                u16 lpLogicalProcIndex)
-{
-        HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex,
-                        lpLogicalProcIndex);
-}
-
-static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event)
-{
-        return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event));
-}
-
-static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp,
-                HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd,
-                HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId,
-                HvLpInstanceId targetInstanceId, u64 correlationToken,
-                u64 eventData1, u64 eventData2, u64 eventData3,
-                u64 eventData4, u64 eventData5)
-{
-        /* Pack the misc bits into a single Dword to pass to PLIC */
-        union {
-                struct {
-                        u8              ack_and_target;
-                        u8              type;
-                        u16             subtype;
-                        HvLpInstanceId  src_inst;
-                        HvLpInstanceId  target_inst;
-                } parms;
-                u64             dword;
-        } packed;
-
-        packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp;
-        packed.parms.type = type;
-        packed.parms.subtype = subtype;
-        packed.parms.src_inst = sourceInstanceId;
-        packed.parms.target_inst = targetInstanceId;
-
-        return HvCall7(HvCallEventSignalLpEventParms, packed.dword,
-                        correlationToken, eventData1, eventData2,
-                        eventData3, eventData4, eventData5);
-}
-
-extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag);
-extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle);
-extern dma_addr_t iseries_hv_map(void *vaddr, size_t size,
-                        enum dma_data_direction direction);
-extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
-                        enum dma_data_direction direction);
-
-static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event)
-{
-        return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event));
-}
-
-static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event)
-{
-        return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event));
-}
-
-static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId(
-                HvLpIndex targetLp, HvLpEvent_Type type)
-{
-        return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type);
-}
-
-static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId(
-                HvLpIndex targetLp, HvLpEvent_Type type)
-{
-        return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type);
-}
-
-static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp,
-                HvLpEvent_Type type)
-{
-        HvCall2(HvCallEventOpenLpEventPath, targetLp, type);
-}
-
-static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp,
-                HvLpEvent_Type type)
-{
-        HvCall2(HvCallEventCloseLpEventPath, targetLp, type);
-}
-
-static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type,
-                HvLpIndex remoteLp, HvLpDma_Direction direction,
-                HvLpInstanceId localInstanceId,
-                HvLpInstanceId remoteInstanceId,
-                HvLpDma_AddressType localAddressType,
-                HvLpDma_AddressType remoteAddressType,
-                /* Do these need to be converted to absolute addresses? */
-                u64 localBufList, u64 remoteBufList, u32 transferLength)
-{
-        /* Pack the misc bits into a single Dword to pass to PLIC */
-        union {
-                struct {
-                        u8              flags;
-                        HvLpIndex       remote;
-                        u8              type;
-                        u8              reserved;
-                        HvLpInstanceId  local_inst;
-                        HvLpInstanceId  remote_inst;
-                } parms;
-                u64             dword;
-        } packed;
-
-        packed.parms.flags = (direction << 7) |
-                (localAddressType << 6) | (remoteAddressType << 5);
-        packed.parms.remote = remoteLp;
-        packed.parms.type = type;
-        packed.parms.reserved = 0;
-        packed.parms.local_inst = localInstanceId;
-        packed.parms.remote_inst = remoteInstanceId;
-
-        return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList,
-                        remoteBufList, transferLength);
-}
-
-static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote,
-                u32 length, HvLpDma_Direction dir)
-{
-        return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote,
-                        length, dir);
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */
diff --git a/include/asm-powerpc/iseries/hv_call_sc.h b/include/asm-powerpc/iseries/hv_call_sc.h
deleted file mode 100644
index f5d210959250..000000000000
--- a/include/asm-powerpc/iseries/hv_call_sc.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H
-#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H
-
-#include <linux/types.h>
-
-#define HvCallBase              0x8000000000000000ul
-#define HvCallCc                0x8001000000000000ul
-#define HvCallCfg               0x8002000000000000ul
-#define HvCallEvent             0x8003000000000000ul
-#define HvCallHpt               0x8004000000000000ul
-#define HvCallPci               0x8005000000000000ul
-#define HvCallSm                0x8007000000000000ul
-#define HvCallXm                0x8009000000000000ul
-
-extern u64 HvCall0(u64);
-extern u64 HvCall1(u64, u64);
-extern u64 HvCall2(u64, u64, u64);
-extern u64 HvCall3(u64, u64, u64, u64);
-extern u64 HvCall4(u64, u64, u64, u64, u64);
-extern u64 HvCall5(u64, u64, u64, u64, u64, u64);
-extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64);
-extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64);
-
-extern u64 HvCall0Ret16(u64, void *);
-extern u64 HvCall1Ret16(u64, void *, u64);
-extern u64 HvCall2Ret16(u64, void *, u64, u64);
-extern u64 HvCall3Ret16(u64, void *, u64, u64, u64);
-extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64);
-extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64);
-extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64);
-extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64);
-
-#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */
diff --git a/include/asm-powerpc/iseries/hv_call_xm.h b/include/asm-powerpc/iseries/hv_call_xm.h
deleted file mode 100644
index 392ac3f54df0..000000000000
--- a/include/asm-powerpc/iseries/hv_call_xm.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * This file contains the "hypervisor call" interface which is used to
- * drive the hypervisor from SLIC.
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H
-#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H
-
-#include <asm/iseries/hv_call_sc.h>
-#include <asm/iseries/hv_types.h>
-
-#define HvCallXmGetTceTableParms        HvCallXm +  0
-#define HvCallXmTestBus                 HvCallXm +  1
-#define HvCallXmConnectBusUnit          HvCallXm +  2
-#define HvCallXmLoadTod                 HvCallXm +  8
-#define HvCallXmTestBusUnit             HvCallXm +  9
-#define HvCallXmSetTce                  HvCallXm + 11
-#define HvCallXmSetTces                 HvCallXm + 13
-
-static inline void HvCallXm_getTceTableParms(u64 cb)
-{
-        HvCall1(HvCallXmGetTceTableParms, cb);
-}
-
-static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce)
-{
-        return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce);
-}
-
-static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset,
-                u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4)
-{
-        return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces,
-                             tce1, tce2, tce3, tce4);
-}
-
-static inline u64 HvCallXm_testBus(u16 busNumber)
-{
-        return HvCall1(HvCallXmTestBus, busNumber);
-}
-
-static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber,
-                u8 deviceId)
-{
-        return HvCall2(HvCallXmTestBusUnit, busNumber,
-                        (subBusNumber << 8) | deviceId);
-}
-
-static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber,
-                u8 deviceId, u64 interruptToken)
-{
-        return HvCall5(HvCallXmConnectBusUnit, busNumber,
-                        (subBusNumber << 8) | deviceId, interruptToken, 0,
-                        0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */);
-}
-
-static inline u64 HvCallXm_loadTod(void)
-{
-        return HvCall0(HvCallXmLoadTod);
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */
diff --git a/include/asm-powerpc/iseries/hv_lp_config.h b/include/asm-powerpc/iseries/hv_lp_config.h
deleted file mode 100644
index a006fd1e4a2c..000000000000
--- a/include/asm-powerpc/iseries/hv_lp_config.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
-#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
-
-/*
- * This file contains the interface to the LPAR configuration data
- * to determine which resources should be allocated to each partition.
- */
-
-#include <asm/iseries/hv_call_sc.h>
-#include <asm/iseries/hv_types.h>
-
-enum {
-        HvCallCfg_Cur   = 0,
-        HvCallCfg_Init  = 1,
-        HvCallCfg_Max   = 2,
-        HvCallCfg_Min   = 3
-};
-
-#define HvCallCfgGetSystemPhysicalProcessors            HvCallCfg +  6
-#define HvCallCfgGetPhysicalProcessors                  HvCallCfg +  7
-#define HvCallCfgGetMsChunks                            HvCallCfg +  9
-#define HvCallCfgGetSharedPoolIndex                     HvCallCfg + 20
-#define HvCallCfgGetSharedProcUnits                     HvCallCfg + 21
-#define HvCallCfgGetNumProcsInSharedPool                HvCallCfg + 22
-#define HvCallCfgGetVirtualLanIndexMap                  HvCallCfg + 30
-#define HvCallCfgGetHostingLpIndex                      HvCallCfg + 32
-
-extern HvLpIndex HvLpConfig_getLpIndex_outline(void);
-extern HvLpIndex HvLpConfig_getLpIndex(void);
-extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void);
-
-static inline u64 HvLpConfig_getMsChunks(void)
-{
-        return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(),
-                        HvCallCfg_Cur);
-}
-
-static inline u64 HvLpConfig_getSystemPhysicalProcessors(void)
-{
-        return HvCall0(HvCallCfgGetSystemPhysicalProcessors);
-}
-
-static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI)
-{
-        return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI);
-}
-
-static inline u64 HvLpConfig_getPhysicalProcessors(void)
-{
-        return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
-                        HvCallCfg_Cur);
-}
-
-static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void)
-{
-        return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex());
-}
-
-static inline u64 HvLpConfig_getSharedProcUnits(void)
-{
-        return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
-                        HvCallCfg_Cur);
-}
-
-static inline u64 HvLpConfig_getMaxSharedProcUnits(void)
-{
-        return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
-                        HvCallCfg_Max);
-}
-
-static inline u64 HvLpConfig_getMaxPhysicalProcessors(void)
-{
-        return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
-                        HvCallCfg_Max);
-}
-
-static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp(
-                HvLpIndex lp)
-{
-        /*
-         * This is a new function in V5R1 so calls to this on older
-         * hypervisors will return -1
-         */
-        u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp);
-        if (retVal == -1)
-                retVal = 0;
-        return retVal;
-}
-
-static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void)
-{
-        return HvLpConfig_getVirtualLanIndexMapForLp(
-                        HvLpConfig_getLpIndex_outline());
-}
-
-static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1,
-                HvLpIndex lp2)
-{
-        HvLpVirtualLanIndexMap virtualLanIndexMap1 =
-                HvLpConfig_getVirtualLanIndexMapForLp(lp1);
-        HvLpVirtualLanIndexMap virtualLanIndexMap2 =
-                HvLpConfig_getVirtualLanIndexMapForLp(lp2);
-        return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0);
-}
-
-static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp)
-{
-        return HvCall1(HvCallCfgGetHostingLpIndex, lp);
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */
diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/include/asm-powerpc/iseries/hv_lp_event.h
deleted file mode 100644
index 8f5da7d77202..000000000000
--- a/include/asm-powerpc/iseries/hv_lp_event.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-/* This file contains the class for HV events in the system. */
-
-#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
-#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
-
-#include <asm/types.h>
-#include <asm/ptrace.h>
-#include <asm/iseries/hv_types.h>
-#include <asm/iseries/hv_call_event.h>
-
-/*
- * HvLpEvent is the structure for Lp Event messages passed between
- * partitions through PLIC.
- */
-
-struct HvLpEvent {
-        u8      flags;                  /* Event flags                x00-x00 */
-        u8      xType;                  /* Type of message            x01-x01 */
-        u16     xSubtype;               /* Subtype for event          x02-x03 */
-        u8      xSourceLp;              /* Source LP                  x04-x04 */
-        u8      xTargetLp;              /* Target LP                  x05-x05 */
-        u8      xSizeMinus1;            /* Size of Derived class - 1  x06-x06 */
-        u8      xRc;                    /* RC for Ack flows           x07-x07 */
-        u16     xSourceInstanceId;      /* Source sides instance id   x08-x09 */
-        u16     xTargetInstanceId;      /* Target sides instance id   x0A-x0B */
-        union {
-                u32     xSubtypeData;   /* Data usable by the subtype x0C-x0F */
-                u16     xSubtypeDataShort[2];   /* Data as 2 shorts */
-                u8      xSubtypeDataChar[4];    /* Data as 4 chars */
-        } x;
-
-        u64     xCorrelationToken;      /* Unique value for source/type x10-x17 */
-};
-
-typedef void (*LpEventHandler)(struct HvLpEvent *);
-
-/* Register a handler for an event type - returns 0 on success */
-extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType,
-                LpEventHandler hdlr);
-
-/*
- * Unregister a handler for an event type
- *
- * This call will sleep until the handler being removed is guaranteed to
- * be no longer executing on any CPU. Do not call with locks held.
- *
- *  returns 0 on success
- *  Unregister will fail if there are any paths open for the type
- */
-extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType);
-
-/*
- * Open an Lp Event Path for an event type
- * returns 0 on success
- * openPath will fail if there is no handler registered for the event type.
- * The lpIndex specified is the partition index for the target partition
- * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero)
- */
-extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
-
-/*
- * Close an Lp Event Path for a type and partition
- * returns 0 on success
- */
-extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
-
-#define HvLpEvent_Type_Hypervisor 0
-#define HvLpEvent_Type_MachineFac 1
-#define HvLpEvent_Type_SessionMgr 2
-#define HvLpEvent_Type_SpdIo      3
-#define HvLpEvent_Type_VirtualBus 4
-#define HvLpEvent_Type_PciIo      5
-#define HvLpEvent_Type_RioIo      6
-#define HvLpEvent_Type_VirtualLan 7
-#define HvLpEvent_Type_VirtualIo  8
-#define HvLpEvent_Type_NumTypes   9
-
-#define HvLpEvent_Rc_Good 0
-#define HvLpEvent_Rc_BufferNotAvailable 1
-#define HvLpEvent_Rc_Cancelled 2
-#define HvLpEvent_Rc_GenericError 3
-#define HvLpEvent_Rc_InvalidAddress 4
-#define HvLpEvent_Rc_InvalidPartition 5
-#define HvLpEvent_Rc_InvalidSize 6
-#define HvLpEvent_Rc_InvalidSubtype 7
-#define HvLpEvent_Rc_InvalidSubtypeData 8
-#define HvLpEvent_Rc_InvalidType 9
-#define HvLpEvent_Rc_PartitionDead 10
-#define HvLpEvent_Rc_PathClosed 11
-#define HvLpEvent_Rc_SubtypeError 12
-
-#define HvLpEvent_Function_Ack 0
-#define HvLpEvent_Function_Int 1
-
-#define HvLpEvent_AckInd_NoAck 0
-#define HvLpEvent_AckInd_DoAck 1
-
-#define HvLpEvent_AckType_ImmediateAck 0
-#define HvLpEvent_AckType_DeferredAck 1
-
-#define HV_LP_EVENT_INT                 0x01
-#define HV_LP_EVENT_DO_ACK              0x02
-#define HV_LP_EVENT_DEFERRED_ACK        0x04
-#define HV_LP_EVENT_VALID               0x80
-
-#define HvLpDma_Direction_LocalToRemote 0
-#define HvLpDma_Direction_RemoteToLocal 1
-
-#define HvLpDma_AddressType_TceIndex 0
-#define HvLpDma_AddressType_RealAddress 1
-
-#define HvLpDma_Rc_Good 0
-#define HvLpDma_Rc_Error 1
-#define HvLpDma_Rc_PartitionDead 2
-#define HvLpDma_Rc_PathClosed 3
-#define HvLpDma_Rc_InvalidAddress 4
-#define HvLpDma_Rc_InvalidLength 5
-
-static inline int hvlpevent_is_valid(struct HvLpEvent *h)
-{
-        return h->flags & HV_LP_EVENT_VALID;
-}
-
-static inline void hvlpevent_invalidate(struct HvLpEvent *h)
-{
-        h->flags &= ~ HV_LP_EVENT_VALID;
-}
-
-static inline int hvlpevent_is_int(struct HvLpEvent *h)
-{
-        return h->flags & HV_LP_EVENT_INT;
-}
-
-static inline int hvlpevent_is_ack(struct HvLpEvent *h)
-{
-        return !hvlpevent_is_int(h);
-}
-
-static inline int hvlpevent_need_ack(struct HvLpEvent *h)
-{
-        return h->flags & HV_LP_EVENT_DO_ACK;
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */
diff --git a/include/asm-powerpc/iseries/hv_types.h b/include/asm-powerpc/iseries/hv_types.h
deleted file mode 100644
index c3e6d2a1d1c3..000000000000
--- a/include/asm-powerpc/iseries/hv_types.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H
-#define _ASM_POWERPC_ISERIES_HV_TYPES_H
-
-/*
- * General typedefs for the hypervisor.
- */
-
-#include <asm/types.h>
-
-typedef u8      HvLpIndex;
-typedef u16     HvLpInstanceId;
-typedef u64     HvLpTOD;
-typedef u64     HvLpSystemSerialNum;
-typedef u8      HvLpDeviceSerialNum[12];
-typedef u16     HvLpSanHwSet;
-typedef u16     HvLpBus;
-typedef u16     HvLpBoard;
-typedef u16     HvLpCard;
-typedef u8      HvLpDeviceType[4];
-typedef u8      HvLpDeviceModel[3];
-typedef u64     HvIoToken;
-typedef u8      HvLpName[8];
-typedef u32     HvIoId;
-typedef u64     HvRealMemoryIndex;
-typedef u32     HvLpIndexMap;   /* Must hold HVMAXARCHITECTEDLPS bits!!! */
-typedef u16     HvLpVrmIndex;
-typedef u32     HvXmGenerationId;
-typedef u8      HvLpBusPool;
-typedef u8      HvLpSharedPoolIndex;
-typedef u16     HvLpSharedProcUnitsX100;
-typedef u8      HvLpVirtualLanIndex;
-typedef u16     HvLpVirtualLanIndexMap; /* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */
-typedef u16     HvBusNumber;    /* Hypervisor Bus Number */
-typedef u8      HvSubBusNumber; /* Hypervisor SubBus Number */
-typedef u8      HvAgentId;      /* Hypervisor DevFn */
-
-
-#define HVMAXARCHITECTEDLPS             32
-#define HVMAXARCHITECTEDVIRTUALLANS     16
-#define HVMAXARCHITECTEDVIRTUALDISKS    32
-#define HVMAXARCHITECTEDVIRTUALCDROMS   8
-#define HVMAXARCHITECTEDVIRTUALTAPES    8
-#define HVCHUNKSIZE                     (256 * 1024)
-#define HVPAGESIZE                      (4 * 1024)
-#define HVLPMINMEGSPRIMARY              256
-#define HVLPMINMEGSSECONDARY            64
-#define HVCHUNKSPERMEG                  4
-#define HVPAGESPERMEG                   256
-#define HVPAGESPERCHUNK                 64
-
-#define HvLpIndexInvalid                ((HvLpIndex)0xff)
-
-/*
- * Enums for the sub-components under PLIC
- * Used in HvCall  and HvPrimaryCall
- */
-enum {
-        HvCallCompId = 0,
-        HvCallCpuCtlsCompId = 1,
-        HvCallCfgCompId = 2,
-        HvCallEventCompId = 3,
-        HvCallHptCompId = 4,
-        HvCallPciCompId = 5,
-        HvCallSlmCompId = 6,
-        HvCallSmCompId = 7,
-        HvCallSpdCompId = 8,
-        HvCallXmCompId = 9,
-        HvCallRioCompId = 10,
-        HvCallRsvd3CompId = 11,
-        HvCallRsvd2CompId = 12,
-        HvCallRsvd1CompId = 13,
-        HvCallMaxCompId = 14,
-        HvPrimaryCallCompId = 0,
-        HvPrimaryCallCfgCompId = 1,
-        HvPrimaryCallPciCompId = 2,
-        HvPrimaryCallSmCompId = 3,
-        HvPrimaryCallSpdCompId = 4,
-        HvPrimaryCallXmCompId = 5,
-        HvPrimaryCallRioCompId = 6,
-        HvPrimaryCallRsvd7CompId = 7,
-        HvPrimaryCallRsvd6CompId = 8,
-        HvPrimaryCallRsvd5CompId = 9,
-        HvPrimaryCallRsvd4CompId = 10,
-        HvPrimaryCallRsvd3CompId = 11,
-        HvPrimaryCallRsvd2CompId = 12,
-        HvPrimaryCallRsvd1CompId = 13,
-        HvPrimaryCallMaxCompId = HvCallMaxCompId
-};
-
-struct HvLpBufferList {
-        u64 addr;
-        u64 len;
-};
-
-#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */
diff --git a/include/asm-powerpc/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h
deleted file mode 100644
index c59ee7e4bed1..000000000000
--- a/include/asm-powerpc/iseries/iommu.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _ASM_POWERPC_ISERIES_IOMMU_H
-#define _ASM_POWERPC_ISERIES_IOMMU_H
-
-/*
- * Copyright (C) 2005  Stephen Rothwell, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the:
- * Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330,
- * Boston, MA  02111-1307  USA
- */
-
-struct pci_dev;
-struct vio_dev;
-struct device_node;
-struct iommu_table;
-
-/* Creates table for an individual device node */
-extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
-                                       struct device_node *dn);
-
-/* Get table parameters from HV */
-extern void iommu_table_getparms_iSeries(unsigned long busno,
-                unsigned char slotno, unsigned char virtbus,
-                struct iommu_table *tbl);
-
-extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev);
-extern void iommu_vio_init(void);
-
-#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */
diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/include/asm-powerpc/iseries/it_lp_queue.h
deleted file mode 100644
index 428278838821..000000000000
--- a/include/asm-powerpc/iseries/it_lp_queue.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
-#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
-
-/*
- *      This control block defines the simple LP queue structure that is
- *      shared between the hypervisor (PLIC) and the OS in order to send
- *      events to an LP.
- */
-
-#include <asm/types.h>
-#include <asm/ptrace.h>
-
-#define IT_LP_MAX_QUEUES        8
-
-#define IT_LP_NOT_USED          0       /* Queue will not be used by PLIC */
-#define IT_LP_DEDICATED_IO      1       /* Queue dedicated to IO processor specified */
-#define IT_LP_DEDICATED_LP      2       /* Queue dedicated to LP specified */
-#define IT_LP_SHARED            3       /* Queue shared for both IO and LP */
-
-#define IT_LP_EVENT_STACK_SIZE  4096
-#define IT_LP_EVENT_MAX_SIZE    256
-#define IT_LP_EVENT_ALIGN       64
-
-struct hvlpevent_queue {
-/*
- * The hq_current_event is the pointer to the next event stack entry
- * that will become valid.  The OS must peek at this entry to determine
- * if it is valid.  PLIC will set the valid indicator as the very last
- * store into that entry.
- *
- * When the OS has completed processing of the event then it will mark
- * the event as invalid so that PLIC knows it can store into that event
- * location again.
- *
- * If the event stack fills and there are overflow events, then PLIC
- * will set the hq_overflow_pending flag in which case the OS will
- * have to fetch the additional LP events once they have drained the
- * event stack.
- *
- * The first 16-bytes are known by both the OS and PLIC.  The remainder
- * of the cache line is for use by the OS.
- */
-        u8              hq_overflow_pending;    /* 0x00 Overflow events are pending */
-        u8              hq_status;              /* 0x01 DedicatedIo or DedicatedLp or NotUsed */
-        u16             hq_proc_index;          /* 0x02 Logical Proc Index for correlation */
-        u8              hq_reserved1[12];       /* 0x04 */
-        char            *hq_current_event;      /* 0x10 */
-        char            *hq_last_event;         /* 0x18 */
-        char            *hq_event_stack;        /* 0x20 */
-        u8              hq_index;               /* 0x28 unique sequential index. */
-        u8              hq_reserved2[3];        /* 0x29-2b */
-        spinlock_t      hq_lock;
-};
-
-extern struct hvlpevent_queue hvlpevent_queue;
-
-extern int hvlpevent_is_pending(void);
-extern void process_hvlpevents(void);
-extern void setup_hvlpevent_queue(void);
-
-#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */
diff --git a/include/asm-powerpc/iseries/lpar_map.h b/include/asm-powerpc/iseries/lpar_map.h
deleted file mode 100644
index 5e9f3e128ee2..000000000000
--- a/include/asm-powerpc/iseries/lpar_map.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H
-#define _ASM_POWERPC_ISERIES_LPAR_MAP_H
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-#endif
-
-/*
- * The iSeries hypervisor will set up mapping for one or more
- * ESID/VSID pairs (in SLB/segment registers) and will set up
- * mappings of one or more ranges of pages to VAs.
- * We will have the hypervisor set up the ESID->VSID mapping
- * for the four kernel segments (C-F).  With shared processors,
- * the hypervisor will clear all segment registers and reload
- * these four whenever the processor is switched from one
- * partition to another.
- */
-
-/* The Vsid and Esid identified below will be used by the hypervisor
- * to set up a memory mapping for part of the load area before giving
- * control to the Linux kernel.  The load area is 64 MB, but this must
- * not attempt to map the whole load area.  The Hashed Page Table may
- * need to be located within the load area (if the total partition size
- * is 64 MB), but cannot be mapped.  Typically, this should specify
- * to map half (32 MB) of the load area.
- *
- * The hypervisor will set up page table entries for the number of
- * pages specified.
- *
- * In 32-bit mode, the hypervisor will load all four of the
- * segment registers (identified by the low-order four bits of the
- * Esid field.  In 64-bit mode, the hypervisor will load one SLB
- * entry to map the Esid to the Vsid.
-*/
-
-#define HvEsidsToMap    2
-#define HvRangesToMap   1
-
-/* Hypervisor initially maps 32MB of the load area */
-#define HvPagesToMap    8192
-
-#ifndef __ASSEMBLY__
-struct LparMap {
-        u64     xNumberEsids;   // Number of ESID/VSID pairs
-        u64     xNumberRanges;  // Number of VA ranges to map
-        u64     xSegmentTableOffs; // Page number within load area of seg table
-        u64     xRsvd[5];
-        struct {
-                u64     xKernelEsid;    // Esid used to map kernel load
-                u64     xKernelVsid;    // Vsid used to map kernel load
-        } xEsids[HvEsidsToMap];
-        struct {
-                u64     xPages;         // Number of pages to be mapped
-                u64     xOffset;        // Offset from start of load area
-                u64     xVPN;           // Virtual Page Number
-        } xRanges[HvRangesToMap];
-};
-
-extern const struct LparMap     xLparMap;
-
-#endif /* __ASSEMBLY__ */
-
-/* the fixed address where the LparMap exists */
-#define LPARMAP_PHYS            0x7000
-
-#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */
diff --git a/include/asm-powerpc/iseries/mf.h b/include/asm-powerpc/iseries/mf.h
deleted file mode 100644
index eb851a9c9e5c..000000000000
--- a/include/asm-powerpc/iseries/mf.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2001  Troy D. Armstrong IBM Corporation
- * Copyright (C) 2004  Stephen Rothwell IBM Corporation
- *
- * This modules exists as an interface between a Linux secondary partition
- * running on an iSeries and the primary partition's Virtual Service
- * Processor (VSP) object.  The VSP has final authority over powering on/off
- * all partitions in the iSeries.  It also provides miscellaneous low-level
- * machine facility type operations.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_MF_H
-#define _ASM_POWERPC_ISERIES_MF_H
-
-#include <linux/types.h>
-
-#include <asm/iseries/hv_types.h>
-#include <asm/iseries/hv_call_event.h>
-
-struct rtc_time;
-
-typedef void (*MFCompleteHandler)(void *clientToken, int returnCode);
-
-extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
-                unsigned size, unsigned amount, MFCompleteHandler hdlr,
-                void *userToken);
-extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
-                unsigned count, MFCompleteHandler hdlr, void *userToken);
-
-extern void mf_power_off(void);
-extern void mf_reboot(char *cmd);
-
-extern void mf_display_src(u32 word);
-extern void mf_display_progress(u16 value);
-
-extern void mf_init(void);
-
-#endif /* _ASM_POWERPC_ISERIES_MF_H */
diff --git a/include/asm-powerpc/iseries/vio.h b/include/asm-powerpc/iseries/vio.h
deleted file mode 100644
index f9ac0d00b951..000000000000
--- a/include/asm-powerpc/iseries/vio.h
+++ /dev/null
@@ -1,265 +0,0 @@
-/* -*- linux-c -*-
- *
- *  iSeries Virtual I/O Message Path header
- *
- *  Authors: Dave Boutcher <boutcher@us.ibm.com>
- *           Ryan Arnold <ryanarn@us.ibm.com>
- *           Colin Devilbiss <devilbis@us.ibm.com>
- *
- * (C) Copyright 2000 IBM Corporation
- *
- * This header file is used by the iSeries virtual I/O device
- * drivers.  It defines the interfaces to the common functions
- * (implemented in drivers/char/viopath.h) as well as defining
- * common functions and structures.  Currently (at the time I
- * wrote this comment) the iSeries virtual I/O device drivers
- * that use this are
- *   drivers/block/viodasd.c
- *   drivers/char/viocons.c
- *   drivers/char/viotape.c
- *   drivers/cdrom/viocd.c
- *
- * The iSeries virtual ethernet support (veth.c) uses a whole
- * different set of functions.
- *
- * This program is free software;  you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) anyu later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef _ASM_POWERPC_ISERIES_VIO_H
-#define _ASM_POWERPC_ISERIES_VIO_H
-
-#include <asm/iseries/hv_types.h>
-#include <asm/iseries/hv_lp_event.h>
-
-/*
- * iSeries virtual I/O events use the subtype field in
- * HvLpEvent to figure out what kind of vio event is coming
- * in.  We use a table to route these, and this defines
- * the maximum number of distinct subtypes
- */
-#define VIO_MAX_SUBTYPES 8
-
-#define VIOMAXBLOCKDMA  12
-
-struct open_data {
-        u64     disk_size;
-        u16     max_disk;
-        u16     cylinders;
-        u16     tracks;
-        u16     sectors;
-        u16     bytes_per_sector;
-};
-
-struct rw_data {
-        u64     offset;
-        struct {
-                u32     token;
-                u32     reserved;
-                u64     len;
-        } dma_info[VIOMAXBLOCKDMA];
-};
-
-struct vioblocklpevent {
-        struct HvLpEvent        event;
-        u32                     reserved;
-        u16                     version;
-        u16                     sub_result;
-        u16                     disk;
-        u16                     flags;
-        union {
-                struct open_data        open_data;
-                struct rw_data          rw_data;
-                u64                     changed;
-        } u;
-};
-
-#define vioblockflags_ro   0x0001
-
-enum vioblocksubtype {
-        vioblockopen = 0x0001,
-        vioblockclose = 0x0002,
-        vioblockread = 0x0003,
-        vioblockwrite = 0x0004,
-        vioblockflush = 0x0005,
-        vioblockcheck = 0x0007
-};
-
-struct viocdlpevent {
-        struct HvLpEvent        event;
-        u32                     reserved;
-        u16                     version;
-        u16                     sub_result;
-        u16                     disk;
-        u16                     flags;
-        u32                     token;
-        u64                     offset;         /* On open, max number of disks */
-        u64                     len;            /* On open, size of the disk */
-        u32                     block_size;     /* Only set on open */
-        u32                     media_size;     /* Only set on open */
-};
-
-enum viocdsubtype {
-        viocdopen = 0x0001,
-        viocdclose = 0x0002,
-        viocdread = 0x0003,
-        viocdwrite = 0x0004,
-        viocdlockdoor = 0x0005,
-        viocdgetinfo = 0x0006,
-        viocdcheck = 0x0007
-};
-
-struct viotapelpevent {
-        struct HvLpEvent event;
-        u32 reserved;
-        u16 version;
-        u16 sub_type_result;
-        u16 tape;
-        u16 flags;
-        u32 token;
-        u64 len;
-        union {
-                struct {
-                        u32 tape_op;
-                        u32 count;
-                } op;
-                struct {
-                        u32 type;
-                        u32 resid;
-                        u32 dsreg;
-                        u32 gstat;
-                        u32 erreg;
-                        u32 file_no;
-                        u32 block_no;
-                } get_status;
-                struct {
-                        u32 block_no;
-                } get_pos;
-        } u;
-};
-
-enum viotapesubtype {
-        viotapeopen = 0x0001,
-        viotapeclose = 0x0002,
-        viotaperead = 0x0003,
-        viotapewrite = 0x0004,
-        viotapegetinfo = 0x0005,
-        viotapeop = 0x0006,
-        viotapegetpos = 0x0007,
-        viotapesetpos = 0x0008,
-        viotapegetstatus = 0x0009
-};
-
-/*
- * Each subtype can register a handler to process their events.
- * The handler must have this interface.
- */
-typedef void (vio_event_handler_t) (struct HvLpEvent * event);
-
-extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq);
-extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq);
-extern int vio_setHandler(int subtype, vio_event_handler_t * beh);
-extern int vio_clearHandler(int subtype);
-extern int viopath_isactive(HvLpIndex lp);
-extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp);
-extern HvLpInstanceId viopath_targetinst(HvLpIndex lp);
-extern void vio_set_hostlp(void);
-extern void *vio_get_event_buffer(int subtype);
-extern void vio_free_event_buffer(int subtype, void *buffer);
-
-extern struct vio_dev *vio_create_viodasd(u32 unit);
-
-extern HvLpIndex viopath_hostLp;
-extern HvLpIndex viopath_ourLp;
-
-#define VIOCHAR_MAX_DATA        200
-
-#define VIOMAJOR_SUBTYPE_MASK   0xff00
-#define VIOMINOR_SUBTYPE_MASK   0x00ff
-#define VIOMAJOR_SUBTYPE_SHIFT  8
-
-#define VIOVERSION              0x0101
-
-/*
- * This is the general structure for VIO errors; each module should have
- * a table of them, and each table should be terminated by an entry of
- * { 0, 0, NULL }.  Then, to find a specific error message, a module
- * should pass its local table and the return code.
- */
-struct vio_error_entry {
-        u16 rc;
-        int errno;
-        const char *msg;
-};
-extern const struct vio_error_entry *vio_lookup_rc(
-                const struct vio_error_entry *local_table, u16 rc);
-
-enum viosubtypes {
-        viomajorsubtype_monitor = 0x0100,
-        viomajorsubtype_blockio = 0x0200,
-        viomajorsubtype_chario = 0x0300,
-        viomajorsubtype_config = 0x0400,
-        viomajorsubtype_cdio = 0x0500,
-        viomajorsubtype_tape = 0x0600,
-        viomajorsubtype_scsi = 0x0700
-};
-
-enum vioconfigsubtype {
-        vioconfigget = 0x0001,
-};
-
-enum viorc {
-        viorc_good = 0x0000,
-        viorc_noConnection = 0x0001,
-        viorc_noReceiver = 0x0002,
-        viorc_noBufferAvailable = 0x0003,
-        viorc_invalidMessageType = 0x0004,
-        viorc_invalidRange = 0x0201,
-        viorc_invalidToken = 0x0202,
-        viorc_DMAError = 0x0203,
-        viorc_useError = 0x0204,
-        viorc_releaseError = 0x0205,
-        viorc_invalidDisk = 0x0206,
-        viorc_openRejected = 0x0301
-};
-
-/*
- * The structure of the events that flow between us and OS/400 for chario
- * events.  You can't mess with this unless the OS/400 side changes too.
- */
-struct viocharlpevent {
-        struct HvLpEvent event;
-        u32 reserved;
-        u16 version;
-        u16 subtype_result_code;
-        u8 virtual_device;
-        u8 len;
-        u8 data[VIOCHAR_MAX_DATA];
-};
-
-#define VIOCHAR_WINDOW          10
-
-enum viocharsubtype {
-        viocharopen = 0x0001,
-        viocharclose = 0x0002,
-        viochardata = 0x0003,
-        viocharack = 0x0004,
-        viocharconfig = 0x0005
-};
-
-enum viochar_rc {
-        viochar_rc_ebusy = 1
-};
-
-#endif /* _ASM_POWERPC_ISERIES_VIO_H */
diff --git a/include/asm-powerpc/kdebug.h b/include/asm-powerpc/kdebug.h
deleted file mode 100644
index ae6d206728af..000000000000
--- a/include/asm-powerpc/kdebug.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_KDEBUG_H
-#define _ASM_POWERPC_KDEBUG_H
-#ifdef __KERNEL__
-
-/* Grossly misnamed. */
-enum die_val {
-        DIE_OOPS = 1,
-        DIE_IABR_MATCH,
-        DIE_DABR_MATCH,
-        DIE_BPT,
-        DIE_SSTEP,
-};
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_KDEBUG_H */
diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h
deleted file mode 100644
index f6c93c716898..000000000000
--- a/include/asm-powerpc/kdump.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _PPC64_KDUMP_H
-#define _PPC64_KDUMP_H
-
-/* Kdump kernel runs at 32 MB, change at your peril. */
-#define KDUMP_KERNELBASE        0x2000000
-
-/* How many bytes to reserve at zero for kdump. The reserve limit should
- * be greater or equal to the trampoline's end address.
- * Reserve to the end of the FWNMI area, see head_64.S */
-#define KDUMP_RESERVE_LIMIT     0x10000 /* 64K */
-
-#ifdef CONFIG_CRASH_DUMP
-
-#define KDUMP_TRAMPOLINE_START  0x0100
-#define KDUMP_TRAMPOLINE_END    0x3000
-
-#define KDUMP_MIN_TCE_ENTRIES   2048
-
-#endif /* CONFIG_CRASH_DUMP */
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_CRASH_DUMP
-
-extern void reserve_kdump_trampoline(void);
-extern void setup_kdump_trampoline(void);
-
-#else /* !CONFIG_CRASH_DUMP */
-
-static inline void reserve_kdump_trampoline(void) { ; }
-static inline void setup_kdump_trampoline(void) { ; }
-
-#endif /* CONFIG_CRASH_DUMP */
-#endif /* __ASSEMBLY__ */
-
-#endif /* __PPC64_KDUMP_H */
diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h
deleted file mode 100644
index acdcdc66f1b6..000000000000
--- a/include/asm-powerpc/kexec.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _ASM_POWERPC_KEXEC_H
-#define _ASM_POWERPC_KEXEC_H
-#ifdef __KERNEL__
-
-/*
- * Maximum page that is mapped directly into kernel memory.
- * XXX: Since we copy virt we can use any page we allocate
- */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-
-/*
- * Maximum address we can reach in physical address mode.
- * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR.
- */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-
-/* Maximum address we can use for the control code buffer */
-#ifdef __powerpc64__
-#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
-#else
-/* TASK_SIZE, probably left over from use_mm ?? */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-#endif
-
-#define KEXEC_CONTROL_CODE_SIZE 4096
-
-/* The native architecture */
-#ifdef __powerpc64__
-#define KEXEC_ARCH KEXEC_ARCH_PPC64
-#else
-#define KEXEC_ARCH KEXEC_ARCH_PPC
-#endif
-
-#ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
-
-typedef void (*crash_shutdown_t)(void);
-
-#ifdef CONFIG_KEXEC
-
-#ifdef __powerpc64__
-/*
- * This function is responsible for capturing register states if coming
- * via panic or invoking dump using sysrq-trigger.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-                                        struct pt_regs *oldregs)
-{
-        if (oldregs)
-                memcpy(newregs, oldregs, sizeof(*newregs));
-        else {
-                /* FIXME Merge this with xmon_save_regs ?? */
-                unsigned long tmp1, tmp2;
-                __asm__ __volatile__ (
-                        "std    0,0(%2)\n"
-                        "std    1,8(%2)\n"
-                        "std    2,16(%2)\n"
-                        "std    3,24(%2)\n"
-                        "std    4,32(%2)\n"
-                        "std    5,40(%2)\n"
-                        "std    6,48(%2)\n"
-                        "std    7,56(%2)\n"
-                        "std    8,64(%2)\n"
-                        "std    9,72(%2)\n"
-                        "std    10,80(%2)\n"
-                        "std    11,88(%2)\n"
-                        "std    12,96(%2)\n"
-                        "std    13,104(%2)\n"
-                        "std    14,112(%2)\n"
-                        "std    15,120(%2)\n"
-                        "std    16,128(%2)\n"
-                        "std    17,136(%2)\n"
-                        "std    18,144(%2)\n"
-                        "std    19,152(%2)\n"
-                        "std    20,160(%2)\n"
-                        "std    21,168(%2)\n"
-                        "std    22,176(%2)\n"
-                        "std    23,184(%2)\n"
-                        "std    24,192(%2)\n"
-                        "std    25,200(%2)\n"
-                        "std    26,208(%2)\n"
-                        "std    27,216(%2)\n"
-                        "std    28,224(%2)\n"
-                        "std    29,232(%2)\n"
-                        "std    30,240(%2)\n"
-                        "std    31,248(%2)\n"
-                        "mfmsr  %0\n"
-                        "std    %0, 264(%2)\n"
-                        "mfctr  %0\n"
-                        "std    %0, 280(%2)\n"
-                        "mflr   %0\n"
-                        "std    %0, 288(%2)\n"
-                        "bl     1f\n"
-                "1:     mflr   %1\n"
-                        "std    %1, 256(%2)\n"
-                        "mtlr   %0\n"
-                        "mfxer  %0\n"
-                        "std    %0, 296(%2)\n"
-                        : "=&r" (tmp1), "=&r" (tmp2)
-                        : "b" (newregs)
-                        : "memory");
-        }
-}
-#else
-/*
- * Provide a dummy definition to avoid build failures. Will remain
- * empty till crash dump support is enabled.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-                                        struct pt_regs *oldregs) { }
-#endif /* !__powerpc64 __ */
-
-extern void kexec_smp_wait(void);       /* get and clear naca physid, wait for
-                                          master to copy new code to 0 */
-extern int crashing_cpu;
-extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
-extern cpumask_t cpus_in_sr;
-static inline int kexec_sr_activated(int cpu)
-{
-        return cpu_isset(cpu,cpus_in_sr);
-}
-
-struct kimage;
-struct pt_regs;
-extern void default_machine_kexec(struct kimage *image);
-extern int default_machine_kexec_prepare(struct kimage *image);
-extern void default_machine_crash_shutdown(struct pt_regs *regs);
-extern int crash_shutdown_register(crash_shutdown_t handler);
-extern int crash_shutdown_unregister(crash_shutdown_t handler);
-
-extern void machine_kexec_simple(struct kimage *image);
-extern void crash_kexec_secondary(struct pt_regs *regs);
-extern int overlaps_crashkernel(unsigned long start, unsigned long size);
-extern void reserve_crashkernel(void);
-
-#else /* !CONFIG_KEXEC */
-static inline int kexec_sr_activated(int cpu) { return 0; }
-static inline void crash_kexec_secondary(struct pt_regs *regs) { }
-
-static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
-{
-        return 0;
-}
-
-static inline void reserve_crashkernel(void) { ; }
-
-static inline int crash_shutdown_register(crash_shutdown_t handler)
-{
-        return 0;
-}
-
-static inline int crash_shutdown_unregister(crash_shutdown_t handler)
-{
-        return 0;
-}
-
-#endif /* CONFIG_KEXEC */
-#endif /* ! __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/include/asm-powerpc/keylargo.h b/include/asm-powerpc/keylargo.h
deleted file mode 100644
index d8520ef121f9..000000000000
--- a/include/asm-powerpc/keylargo.h
+++ /dev/null
@@ -1,261 +0,0 @@
-#ifndef _ASM_POWERPC_KEYLARGO_H
-#define _ASM_POWERPC_KEYLARGO_H
-#ifdef __KERNEL__
-/*
- * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
- *
- */
-
-/* "Pangea" chipset has keylargo device-id 0x25 while core99
- * has device-id 0x22. The rev. of the pangea one is 0, so we
- * fake an artificial rev. in keylargo_rev by oring 0x100
- */
-#define KL_PANGEA_REV           0x100
-
-/* offset from base for feature control registers */
-#define KEYLARGO_MBCR           0x34    /* KL Only, Media bay control/status */
-#define KEYLARGO_FCR0           0x38
-#define KEYLARGO_FCR1           0x3c
-#define KEYLARGO_FCR2           0x40
-#define KEYLARGO_FCR3           0x44
-#define KEYLARGO_FCR4           0x48
-#define KEYLARGO_FCR5           0x4c    /* Pangea only */
-
-/* K2 aditional FCRs */
-#define K2_FCR6                 0x34
-#define K2_FCR7                 0x30
-#define K2_FCR8                 0x2c
-#define K2_FCR9                 0x28
-#define K2_FCR10                0x24
-
-/* GPIO registers */
-#define KEYLARGO_GPIO_LEVELS0           0x50
-#define KEYLARGO_GPIO_LEVELS1           0x54
-#define KEYLARGO_GPIO_EXTINT_0          0x58
-#define KEYLARGO_GPIO_EXTINT_CNT        18
-#define KEYLARGO_GPIO_0                 0x6A
-#define KEYLARGO_GPIO_CNT               17
-#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE  0x80
-#define KEYLARGO_GPIO_OUTPUT_ENABLE     0x04
-#define KEYLARGO_GPIO_OUTOUT_DATA       0x01
-#define KEYLARGO_GPIO_INPUT_DATA        0x02
-
-/* K2 does only extint GPIOs and does 51 of them */
-#define K2_GPIO_EXTINT_0                0x58
-#define K2_GPIO_EXTINT_CNT              51
-
-/* Specific GPIO regs */
-
-#define KL_GPIO_MODEM_RESET             (KEYLARGO_GPIO_0+0x03)
-#define KL_GPIO_MODEM_POWER             (KEYLARGO_GPIO_0+0x02) /* Pangea */
-
-#define KL_GPIO_SOUND_POWER             (KEYLARGO_GPIO_0+0x05)
-
-/* Hrm... this one is only to be used on Pismo. It seeem to also
- * control the timebase enable on other machines. Still to be
- * experimented... --BenH.
- */
-#define KL_GPIO_FW_CABLE_POWER          (KEYLARGO_GPIO_0+0x09)
-#define KL_GPIO_TB_ENABLE               (KEYLARGO_GPIO_0+0x09)
-
-#define KL_GPIO_ETH_PHY_RESET           (KEYLARGO_GPIO_0+0x10)
-
-#define KL_GPIO_EXTINT_CPU1             (KEYLARGO_GPIO_0+0x0a)
-#define KL_GPIO_EXTINT_CPU1_ASSERT      0x04
-#define KL_GPIO_EXTINT_CPU1_RELEASE     0x38
-
-#define KL_GPIO_RESET_CPU0              (KEYLARGO_GPIO_EXTINT_0+0x03)
-#define KL_GPIO_RESET_CPU1              (KEYLARGO_GPIO_EXTINT_0+0x04)
-#define KL_GPIO_RESET_CPU2              (KEYLARGO_GPIO_EXTINT_0+0x0f)
-#define KL_GPIO_RESET_CPU3              (KEYLARGO_GPIO_EXTINT_0+0x10)
-
-#define KL_GPIO_PMU_MESSAGE_IRQ         (KEYLARGO_GPIO_EXTINT_0+0x09)
-#define KL_GPIO_PMU_MESSAGE_BIT         KEYLARGO_GPIO_INPUT_DATA
-
-#define KL_GPIO_MEDIABAY_IRQ            (KEYLARGO_GPIO_EXTINT_0+0x0e)
-
-#define KL_GPIO_AIRPORT_0               (KEYLARGO_GPIO_EXTINT_0+0x0a)
-#define KL_GPIO_AIRPORT_1               (KEYLARGO_GPIO_EXTINT_0+0x0d)
-#define KL_GPIO_AIRPORT_2               (KEYLARGO_GPIO_0+0x0d)
-#define KL_GPIO_AIRPORT_3               (KEYLARGO_GPIO_0+0x0e)
-#define KL_GPIO_AIRPORT_4               (KEYLARGO_GPIO_0+0x0f)
-
-/*
- * Bits in feature control register. Those bits different for K2 are
- * listed separately
- */
-#define KL_MBCR_MB0_PCI_ENABLE          0x00000800      /* exist ? */
-#define KL_MBCR_MB0_IDE_ENABLE          0x00001000
-#define KL_MBCR_MB0_FLOPPY_ENABLE       0x00002000      /* exist ? */
-#define KL_MBCR_MB0_SOUND_ENABLE        0x00004000      /* hrm... */
-#define KL_MBCR_MB0_DEV_MASK            0x00007800
-#define KL_MBCR_MB0_DEV_POWER           0x00000400
-#define KL_MBCR_MB0_DEV_RESET           0x00000200
-#define KL_MBCR_MB0_ENABLE              0x00000100
-#define KL_MBCR_MB1_PCI_ENABLE          0x08000000      /* exist ? */
-#define KL_MBCR_MB1_IDE_ENABLE          0x10000000
-#define KL_MBCR_MB1_FLOPPY_ENABLE       0x20000000      /* exist ? */
-#define KL_MBCR_MB1_SOUND_ENABLE        0x40000000      /* hrm... */
-#define KL_MBCR_MB1_DEV_MASK            0x78000000
-#define KL_MBCR_MB1_DEV_POWER           0x04000000
-#define KL_MBCR_MB1_DEV_RESET           0x02000000
-#define KL_MBCR_MB1_ENABLE              0x01000000
-
-#define KL0_SCC_B_INTF_ENABLE           0x00000001      /* (KL Only) */
-#define KL0_SCC_A_INTF_ENABLE           0x00000002
-#define KL0_SCC_SLOWPCLK                0x00000004
-#define KL0_SCC_RESET                   0x00000008
-#define KL0_SCCA_ENABLE                 0x00000010
-#define KL0_SCCB_ENABLE                 0x00000020
-#define KL0_SCC_CELL_ENABLE             0x00000040
-#define KL0_IRDA_HIGH_BAND              0x00000100      /* (KL Only) */
-#define KL0_IRDA_SOURCE2_SEL            0x00000200      /* (KL Only) */
-#define KL0_IRDA_SOURCE1_SEL            0x00000400      /* (KL Only) */
-#define KL0_PG_USB0_PMI_ENABLE          0x00000400      /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_RESET                  0x00000800      /* (KL Only) */
-#define KL0_PG_USB0_REF_SUSPEND_SEL     0x00000800      /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_DEFAULT1               0x00001000      /* (KL Only) */
-#define KL0_PG_USB0_REF_SUSPEND         0x00001000      /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_DEFAULT0               0x00002000      /* (KL Only) */
-#define KL0_PG_USB0_PAD_SUSPEND         0x00002000      /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_FAST_CONNECT           0x00004000      /* (KL Only) */
-#define KL0_PG_USB1_PMI_ENABLE          0x00004000      /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_ENABLE                 0x00008000      /* (KL Only) */
-#define KL0_PG_USB1_REF_SUSPEND_SEL     0x00008000      /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_CLK32_ENABLE           0x00010000      /* (KL Only) */
-#define KL0_PG_USB1_REF_SUSPEND         0x00010000      /* (Pangea/Intrepid Only) */
-#define KL0_IRDA_CLK19_ENABLE           0x00020000      /* (KL Only) */
-#define KL0_PG_USB1_PAD_SUSPEND         0x00020000      /* (Pangea/Intrepid Only) */
-#define KL0_USB0_PAD_SUSPEND0           0x00040000
-#define KL0_USB0_PAD_SUSPEND1           0x00080000
-#define KL0_USB0_CELL_ENABLE            0x00100000
-#define KL0_USB1_PAD_SUSPEND0           0x00400000
-#define KL0_USB1_PAD_SUSPEND1           0x00800000
-#define KL0_USB1_CELL_ENABLE            0x01000000
-#define KL0_USB_REF_SUSPEND             0x10000000      /* (KL Only) */
-
-#define KL0_SERIAL_ENABLE               (KL0_SCC_B_INTF_ENABLE | \
-                                        KL0_SCC_SLOWPCLK | \
-                                        KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
-
-#define KL1_USB2_PMI_ENABLE             0x00000001      /* Intrepid only */
-#define KL1_AUDIO_SEL_22MCLK            0x00000002      /* KL/Pangea only */
-#define KL1_USB2_REF_SUSPEND_SEL        0x00000002      /* Intrepid only */
-#define KL1_USB2_REF_SUSPEND            0x00000004      /* Intrepid only */
-#define KL1_AUDIO_CLK_ENABLE_BIT        0x00000008      /* KL/Pangea only */
-#define KL1_USB2_PAD_SUSPEND_SEL        0x00000008      /* Intrepid only */
-#define KL1_USB2_PAD_SUSPEND0           0x00000010      /* Intrepid only */
-#define KL1_AUDIO_CLK_OUT_ENABLE        0x00000020      /* KL/Pangea only */
-#define KL1_USB2_PAD_SUSPEND1           0x00000020      /* Intrepid only */
-#define KL1_AUDIO_CELL_ENABLE           0x00000040      /* KL/Pangea only */
-#define KL1_USB2_CELL_ENABLE            0x00000040      /* Intrepid only */
-#define KL1_AUDIO_CHOOSE                0x00000080      /* KL/Pangea only */
-#define KL1_I2S0_CHOOSE                 0x00000200      /* KL Only */
-#define KL1_I2S0_CELL_ENABLE            0x00000400
-#define KL1_I2S0_CLK_ENABLE_BIT         0x00001000
-#define KL1_I2S0_ENABLE                 0x00002000
-#define KL1_I2S1_CELL_ENABLE            0x00020000
-#define KL1_I2S1_CLK_ENABLE_BIT         0x00080000
-#define KL1_I2S1_ENABLE                 0x00100000
-#define KL1_EIDE0_ENABLE                0x00800000      /* KL/Intrepid Only */
-#define KL1_EIDE0_RESET_N               0x01000000      /* KL/Intrepid Only */
-#define KL1_EIDE1_ENABLE                0x04000000      /* KL Only */
-#define KL1_EIDE1_RESET_N               0x08000000      /* KL Only */
-#define KL1_UIDE_ENABLE                 0x20000000      /* KL/Pangea Only */
-#define KL1_UIDE_RESET_N                0x40000000      /* KL/Pangea Only */
-
-#define KL2_IOBUS_ENABLE                0x00000002
-#define KL2_SLEEP_STATE_BIT             0x00000100      /* KL Only */
-#define KL2_PG_STOP_ALL_CLOCKS          0x00000100      /* Pangea Only */
-#define KL2_MPIC_ENABLE                 0x00020000
-#define KL2_CARDSLOT_RESET              0x00040000      /* Pangea/Intrepid Only */
-#define KL2_ALT_DATA_OUT                0x02000000      /* KL Only ??? */
-#define KL2_MEM_IS_BIG                  0x04000000
-#define KL2_CARDSEL_16                  0x08000000
-
-#define KL3_SHUTDOWN_PLL_TOTAL          0x00000001      /* KL/Pangea only */
-#define KL3_SHUTDOWN_PLLKW6             0x00000002      /* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL3            0x00000002      /* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW4             0x00000004      /* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL2            0x00000004      /* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW35            0x00000008      /* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL1            0x00000008      /* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW12            0x00000010      /* KL Only */
-#define KL3_IT_ENABLE_PLL3_SHUTDOWN     0x00000010      /* Intrepid only */
-#define KL3_PLL_RESET                   0x00000020      /* KL/Pangea only */
-#define KL3_IT_ENABLE_PLL2_SHUTDOWN     0x00000020      /* Intrepid only */
-#define KL3_IT_ENABLE_PLL1_SHUTDOWN     0x00000010      /* Intrepid only */
-#define KL3_SHUTDOWN_PLL2X              0x00000080      /* KL Only */
-#define KL3_CLK66_ENABLE                0x00000100      /* KL Only */
-#define KL3_CLK49_ENABLE                0x00000200
-#define KL3_CLK45_ENABLE                0x00000400
-#define KL3_CLK31_ENABLE                0x00000800      /* KL/Pangea only */
-#define KL3_TIMER_CLK18_ENABLE          0x00001000
-#define KL3_I2S1_CLK18_ENABLE           0x00002000
-#define KL3_I2S0_CLK18_ENABLE           0x00004000
-#define KL3_VIA_CLK16_ENABLE            0x00008000      /* KL/Pangea only */
-#define KL3_IT_VIA_CLK32_ENABLE         0x00008000      /* Intrepid only */
-#define KL3_STOPPING33_ENABLED          0x00080000      /* KL Only */
-#define KL3_PG_PLL_ENABLE_TEST          0x00080000      /* Pangea Only */
-
-/* Intrepid USB bus 2, port 0,1 */
-#define KL3_IT_PORT_WAKEUP_ENABLE(p)            (0x00080000 << ((p)<<3))
-#define KL3_IT_PORT_RESUME_WAKE_EN(p)           (0x00040000 << ((p)<<3))
-#define KL3_IT_PORT_CONNECT_WAKE_EN(p)          (0x00020000 << ((p)<<3))
-#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p)       (0x00010000 << ((p)<<3))
-#define KL3_IT_PORT_RESUME_STAT(p)              (0x00300000 << ((p)<<3))
-#define KL3_IT_PORT_CONNECT_STAT(p)             (0x00200000 << ((p)<<3))
-#define KL3_IT_PORT_DISCONNECT_STAT(p)          (0x00100000 << ((p)<<3))
-
-/* Port 0,1 : bus 0, port 2,3 : bus 1 */
-#define KL4_PORT_WAKEUP_ENABLE(p)       (0x00000008 << ((p)<<3))
-#define KL4_PORT_RESUME_WAKE_EN(p)      (0x00000004 << ((p)<<3))
-#define KL4_PORT_CONNECT_WAKE_EN(p)     (0x00000002 << ((p)<<3))
-#define KL4_PORT_DISCONNECT_WAKE_EN(p)  (0x00000001 << ((p)<<3))
-#define KL4_PORT_RESUME_STAT(p)         (0x00000040 << ((p)<<3))
-#define KL4_PORT_CONNECT_STAT(p)        (0x00000020 << ((p)<<3))
-#define KL4_PORT_DISCONNECT_STAT(p)     (0x00000010 << ((p)<<3))
-
-/* Pangea and Intrepid only */
-#define KL5_VIA_USE_CLK31               0000000001      /* Pangea Only */
-#define KL5_SCC_USE_CLK31               0x00000002      /* Pangea Only */
-#define KL5_PWM_CLK32_EN                0x00000004
-#define KL5_CLK3_68_EN                  0x00000010
-#define KL5_CLK32_EN                    0x00000020
-
-
-/* K2 definitions */
-#define K2_FCR0_USB0_SWRESET            0x00200000
-#define K2_FCR0_USB1_SWRESET            0x02000000
-#define K2_FCR0_RING_PME_DISABLE        0x08000000
-
-#define K2_FCR1_PCI1_BUS_RESET_N        0x00000010
-#define K2_FCR1_PCI1_SLEEP_RESET_EN     0x00000020
-#define K2_FCR1_I2S0_CELL_ENABLE        0x00000400
-#define K2_FCR1_I2S0_RESET              0x00000800
-#define K2_FCR1_I2S0_CLK_ENABLE_BIT     0x00001000
-#define K2_FCR1_I2S0_ENABLE             0x00002000
-#define K2_FCR1_PCI1_CLK_ENABLE         0x00004000
-#define K2_FCR1_FW_CLK_ENABLE           0x00008000
-#define K2_FCR1_FW_RESET_N              0x00010000
-#define K2_FCR1_I2S1_CELL_ENABLE        0x00020000
-#define K2_FCR1_I2S1_CLK_ENABLE_BIT     0x00080000
-#define K2_FCR1_I2S1_ENABLE             0x00100000
-#define K2_FCR1_GMAC_CLK_ENABLE         0x00400000
-#define K2_FCR1_GMAC_POWER_DOWN         0x00800000
-#define K2_FCR1_GMAC_RESET_N            0x01000000
-#define K2_FCR1_SATA_CLK_ENABLE         0x02000000
-#define K2_FCR1_SATA_POWER_DOWN         0x04000000
-#define K2_FCR1_SATA_RESET_N            0x08000000
-#define K2_FCR1_UATA_CLK_ENABLE         0x10000000
-#define K2_FCR1_UATA_RESET_N            0x40000000
-#define K2_FCR1_UATA_CHOOSE_CLK66       0x80000000
-
-/* Shasta definitions */
-#define SH_FCR1_I2S2_CELL_ENABLE        0x00000010
-#define SH_FCR1_I2S2_CLK_ENABLE_BIT     0x00000040
-#define SH_FCR1_I2S2_ENABLE             0x00000080
-#define SH_FCR3_I2S2_CLK18_ENABLE       0x00008000
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_KEYLARGO_H */
diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h
deleted file mode 100644
index 1399caf719ae..000000000000
--- a/include/asm-powerpc/kgdb.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/asm-powerpc/kgdb.h
- *
- * The PowerPC (32/64) specific defines / externs for KGDB.  Based on
- * the previous 32bit and 64bit specific files, which had the following
- * copyrights:
- *
- * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
- * PPC Mods (C) 2004 Tom Rini (trini@mvista.com)
- * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com)
- * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
- *
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Author: Tom Rini <trini@kernel.crashing.org>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifdef __KERNEL__
-#ifndef __POWERPC_KGDB_H__
-#define __POWERPC_KGDB_H__
-
-#ifndef __ASSEMBLY__
-
-#define BREAK_INSTR_SIZE        4
-#define BUFMAX                  ((NUMREGBYTES * 2) + 512)
-#define OUTBUFMAX               ((NUMREGBYTES * 2) + 512)
-static inline void arch_kgdb_breakpoint(void)
-{
-        asm(".long 0x7d821008"); /* twge r2, r2 */
-}
-#define CACHE_FLUSH_IS_SAFE     1
-
-/* The number bytes of registers we have to save depends on a few
- * things.  For 64bit we default to not including vector registers and
- * vector state registers. */
-#ifdef CONFIG_PPC64
-/*
- * 64 bit (8 byte) registers:
- *   32 gpr, 32 fpr, nip, msr, link, ctr
- * 32 bit (4 byte) registers:
- *   ccr, xer, fpscr
- */
-#define NUMREGBYTES             ((68 * 8) + (3 * 4))
-#define NUMCRITREGBYTES         184
-#else /* CONFIG_PPC32 */
-/* On non-E500 family PPC32 we determine the size by picking the last
- * register we need, but on E500 we skip sections so we list what we
- * need to store, and add it up. */
-#ifndef CONFIG_E500
-#define MAXREG                  (PT_FPSCR+1)
-#else
-/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
-#define MAXREG                 ((32*2)+6+2+1)
-#endif
-#define NUMREGBYTES             (MAXREG * sizeof(int))
-/* CR/LR, R1, R2, R13-R31 inclusive. */
-#define NUMCRITREGBYTES         (23 * sizeof(int))
-#endif /* 32/64 */
-#endif /* !(__ASSEMBLY__) */
-#endif /* !__POWERPC_KGDB_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/kmap_types.h b/include/asm-powerpc/kmap_types.h
deleted file mode 100644
index b6bac6f61c16..000000000000
--- a/include/asm-powerpc/kmap_types.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _ASM_POWERPC_KMAP_TYPES_H
-#define _ASM_POWERPC_KMAP_TYPES_H
-
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-enum km_type {
-        KM_BOUNCE_READ,
-        KM_SKB_SUNRPC_DATA,
-        KM_SKB_DATA_SOFTIRQ,
-        KM_USER0,
-        KM_USER1,
-        KM_BIO_SRC_IRQ,
-        KM_BIO_DST_IRQ,
-        KM_PTE0,
-        KM_PTE1,
-        KM_IRQ0,
-        KM_IRQ1,
-        KM_SOFTIRQ0,
-        KM_SOFTIRQ1,
-        KM_PPC_SYNC_PAGE,
-        KM_PPC_SYNC_ICACHE,
-        KM_TYPE_NR
-};
-
-#endif  /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_KMAP_TYPES_H */
diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h
deleted file mode 100644
index d0e7701fa1f6..000000000000
--- a/include/asm-powerpc/kprobes.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef _ASM_POWERPC_KPROBES_H
-#define _ASM_POWERPC_KPROBES_H
-#ifdef __KERNEL__
-/*
- *  Kernel Probes (KProbes)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- *
- * 2002-Oct     Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
- *              Probes initial implementation ( includes suggestions from
- *              Rusty Russell).
- * 2004-Nov     Modified for PPC64 by Ananth N Mavinakayanahalli
- *              <ananth@in.ibm.com>
- */
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-
-#define  __ARCH_WANT_KPROBES_INSN_SLOT
-
-struct pt_regs;
-struct kprobe;
-
-typedef unsigned int kprobe_opcode_t;
-#define BREAKPOINT_INSTRUCTION  0x7fe00008      /* trap */
-#define MAX_INSN_SIZE 1
-
-#define IS_TW(instr)            (((instr) & 0xfc0007fe) == 0x7c000008)
-#define IS_TD(instr)            (((instr) & 0xfc0007fe) == 0x7c000088)
-#define IS_TDI(instr)           (((instr) & 0xfc000000) == 0x08000000)
-#define IS_TWI(instr)           (((instr) & 0xfc000000) == 0x0c000000)
-
-#ifdef CONFIG_PPC64
-/*
- * 64bit powerpc uses function descriptors.
- * Handle cases where:
- *              - User passes a <.symbol> or <module:.symbol>
- *              - User passes a <symbol> or <module:symbol>
- *              - User passes a non-existant symbol, kallsyms_lookup_name
- *                returns 0. Don't deref the NULL pointer in that case
- */
-#define kprobe_lookup_name(name, addr)                                  \
-{                                                                       \
-        addr = (kprobe_opcode_t *)kallsyms_lookup_name(name);           \
-        if (addr) {                                                     \
-                char *colon;                                            \
-                if ((colon = strchr(name, ':')) != NULL) {              \
-                        colon++;                                        \
-                        if (*colon != '\0' && *colon != '.')            \
-                                addr = *(kprobe_opcode_t **)addr;       \
-                } else if (name[0] != '.')                              \
-                        addr = *(kprobe_opcode_t **)addr;               \
-        } else {                                                        \
-                char dot_name[KSYM_NAME_LEN];                           \
-                dot_name[0] = '.';                                      \
-                dot_name[1] = '\0';                                     \
-                strncat(dot_name, name, KSYM_NAME_LEN - 2);             \
-                addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \
-        }                                                               \
-}
-
-#define is_trap(instr)  (IS_TW(instr) || IS_TD(instr) || \
-                        IS_TWI(instr) || IS_TDI(instr))
-#else
-/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */
-#define is_trap(instr)  (IS_TW(instr) || IS_TWI(instr))
-#endif
-
-#define flush_insn_slot(p)      do { } while (0)
-#define kretprobe_blacklist_size 0
-
-void kretprobe_trampoline(void);
-extern void arch_remove_kprobe(struct kprobe *p);
-
-/* Architecture specific copy of original instruction */
-struct arch_specific_insn {
-        /* copy of original instruction */
-        kprobe_opcode_t *insn;
-        /*
-         * Set in kprobes code, initially to 0. If the instruction can be
-         * eumulated, this is set to 1, if not, to -1.
-         */
-        int boostable;
-};
-
-struct prev_kprobe {
-        struct kprobe *kp;
-        unsigned long status;
-        unsigned long saved_msr;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
-        unsigned long kprobe_status;
-        unsigned long kprobe_saved_msr;
-        struct pt_regs jprobe_saved_regs;
-        struct prev_kprobe prev_kprobe;
-};
-
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-                                        unsigned long val, void *data);
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_KPROBES_H */
diff --git a/include/asm-powerpc/kvm.h b/include/asm-powerpc/kvm.h
deleted file mode 100644
index f993e4198d5c..000000000000
--- a/include/asm-powerpc/kvm.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2007
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __LINUX_KVM_POWERPC_H
-#define __LINUX_KVM_POWERPC_H
-
-#include <asm/types.h>
-
-struct kvm_regs {
-        __u64 pc;
-        __u64 cr;
-        __u64 ctr;
-        __u64 lr;
-        __u64 xer;
-        __u64 msr;
-        __u64 srr0;
-        __u64 srr1;
-        __u64 pid;
-
-        __u64 sprg0;
-        __u64 sprg1;
-        __u64 sprg2;
-        __u64 sprg3;
-        __u64 sprg4;
-        __u64 sprg5;
-        __u64 sprg6;
-        __u64 sprg7;
-
-        __u64 gpr[32];
-};
-
-struct kvm_sregs {
-};
-
-struct kvm_fpu {
-        __u64 fpr[32];
-};
-
-#endif /* __LINUX_KVM_POWERPC_H */
diff --git a/include/asm-powerpc/kvm_asm.h b/include/asm-powerpc/kvm_asm.h
deleted file mode 100644
index 2197764796d9..000000000000
--- a/include/asm-powerpc/kvm_asm.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2008
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __POWERPC_KVM_ASM_H__
-#define __POWERPC_KVM_ASM_H__
-
-/* IVPR must be 64KiB-aligned. */
-#define VCPU_SIZE_ORDER 4
-#define VCPU_SIZE_LOG   (VCPU_SIZE_ORDER + 12)
-#define VCPU_TLB_PGSZ   PPC44x_TLB_64K
-#define VCPU_SIZE_BYTES (1<<VCPU_SIZE_LOG)
-
-#define BOOKE_INTERRUPT_CRITICAL 0
-#define BOOKE_INTERRUPT_MACHINE_CHECK 1
-#define BOOKE_INTERRUPT_DATA_STORAGE 2
-#define BOOKE_INTERRUPT_INST_STORAGE 3
-#define BOOKE_INTERRUPT_EXTERNAL 4
-#define BOOKE_INTERRUPT_ALIGNMENT 5
-#define BOOKE_INTERRUPT_PROGRAM 6
-#define BOOKE_INTERRUPT_FP_UNAVAIL 7
-#define BOOKE_INTERRUPT_SYSCALL 8
-#define BOOKE_INTERRUPT_AP_UNAVAIL 9
-#define BOOKE_INTERRUPT_DECREMENTER 10
-#define BOOKE_INTERRUPT_FIT 11
-#define BOOKE_INTERRUPT_WATCHDOG 12
-#define BOOKE_INTERRUPT_DTLB_MISS 13
-#define BOOKE_INTERRUPT_ITLB_MISS 14
-#define BOOKE_INTERRUPT_DEBUG 15
-#define BOOKE_MAX_INTERRUPT 15
-
-#define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
-#define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
-
-#define RESUME_GUEST            0
-#define RESUME_GUEST_NV         RESUME_FLAG_NV
-#define RESUME_HOST             RESUME_FLAG_HOST
-#define RESUME_HOST_NV          (RESUME_FLAG_HOST|RESUME_FLAG_NV)
-
-#endif /* __POWERPC_KVM_ASM_H__ */
diff --git a/include/asm-powerpc/kvm_host.h b/include/asm-powerpc/kvm_host.h
deleted file mode 100644
index 2655e2a4831e..000000000000
--- a/include/asm-powerpc/kvm_host.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2007
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __POWERPC_KVM_HOST_H__
-#define __POWERPC_KVM_HOST_H__
-
-#include <linux/mutex.h>
-#include <linux/timer.h>
-#include <linux/types.h>
-#include <linux/kvm_types.h>
-#include <asm/kvm_asm.h>
-
-#define KVM_MAX_VCPUS 1
-#define KVM_MEMORY_SLOTS 32
-/* memory slots that does not exposed to userspace */
-#define KVM_PRIVATE_MEM_SLOTS 4
-
-#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
-
-/* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1<<31)
-
-struct kvm;
-struct kvm_run;
-struct kvm_vcpu;
-
-struct kvm_vm_stat {
-        u32 remote_tlb_flush;
-};
-
-struct kvm_vcpu_stat {
-        u32 sum_exits;
-        u32 mmio_exits;
-        u32 dcr_exits;
-        u32 signal_exits;
-        u32 light_exits;
-        /* Account for special types of light exits: */
-        u32 itlb_real_miss_exits;
-        u32 itlb_virt_miss_exits;
-        u32 dtlb_real_miss_exits;
-        u32 dtlb_virt_miss_exits;
-        u32 syscall_exits;
-        u32 isi_exits;
-        u32 dsi_exits;
-        u32 emulated_inst_exits;
-        u32 dec_exits;
-        u32 ext_intr_exits;
-        u32 halt_wakeup;
-};
-
-struct tlbe {
-        u32 tid; /* Only the low 8 bits are used. */
-        u32 word0;
-        u32 word1;
-        u32 word2;
-};
-
-struct kvm_arch {
-};
-
-struct kvm_vcpu_arch {
-        /* Unmodified copy of the guest's TLB. */
-        struct tlbe guest_tlb[PPC44x_TLB_SIZE];
-        /* TLB that's actually used when the guest is running. */
-        struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
-        /* Pages which are referenced in the shadow TLB. */
-        struct page *shadow_pages[PPC44x_TLB_SIZE];
-        /* Copy of the host's TLB. */
-        struct tlbe host_tlb[PPC44x_TLB_SIZE];
-
-        u32 host_stack;
-        u32 host_pid;
-
-        u64 fpr[32];
-        u32 gpr[32];
-
-        u32 pc;
-        u32 cr;
-        u32 ctr;
-        u32 lr;
-        u32 xer;
-
-        u32 msr;
-        u32 mmucr;
-        u32 sprg0;
-        u32 sprg1;
-        u32 sprg2;
-        u32 sprg3;
-        u32 sprg4;
-        u32 sprg5;
-        u32 sprg6;
-        u32 sprg7;
-        u32 srr0;
-        u32 srr1;
-        u32 csrr0;
-        u32 csrr1;
-        u32 dsrr0;
-        u32 dsrr1;
-        u32 dear;
-        u32 esr;
-        u32 dec;
-        u32 decar;
-        u32 tbl;
-        u32 tbu;
-        u32 tcr;
-        u32 tsr;
-        u32 ivor[16];
-        u32 ivpr;
-        u32 pir;
-        u32 pid;
-        u32 pvr;
-        u32 ccr0;
-        u32 ccr1;
-        u32 dbcr0;
-        u32 dbcr1;
-
-        u32 last_inst;
-        u32 fault_dear;
-        u32 fault_esr;
-        gpa_t paddr_accessed;
-
-        u8 io_gpr; /* GPR used as IO source/target */
-        u8 mmio_is_bigendian;
-        u8 dcr_needed;
-        u8 dcr_is_write;
-
-        u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
-
-        struct timer_list dec_timer;
-        unsigned long pending_exceptions;
-};
-
-struct kvm_guest_debug {
-        int enabled;
-        unsigned long bp[4];
-        int singlestep;
-};
-
-#endif /* __POWERPC_KVM_HOST_H__ */
diff --git a/include/asm-powerpc/kvm_para.h b/include/asm-powerpc/kvm_para.h
deleted file mode 100644
index 2d48f6a63d0b..000000000000
--- a/include/asm-powerpc/kvm_para.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2008
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __POWERPC_KVM_PARA_H__
-#define __POWERPC_KVM_PARA_H__
-
-#ifdef __KERNEL__
-
-static inline int kvm_para_available(void)
-{
-        return 0;
-}
-
-static inline unsigned int kvm_arch_para_features(void)
-{
-        return 0;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __POWERPC_KVM_PARA_H__ */
diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h
deleted file mode 100644
index a8b068792260..000000000000
--- a/include/asm-powerpc/kvm_ppc.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2008
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __POWERPC_KVM_PPC_H__
-#define __POWERPC_KVM_PPC_H__
-
-/* This file exists just so we can dereference kvm_vcpu, avoiding nested header
- * dependencies. */
-
-#include <linux/mutex.h>
-#include <linux/timer.h>
-#include <linux/types.h>
-#include <linux/kvm_types.h>
-#include <linux/kvm_host.h>
-
-struct kvm_tlb {
-        struct tlbe guest_tlb[PPC44x_TLB_SIZE];
-        struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
-};
-
-enum emulation_result {
-        EMULATE_DONE,         /* no further processing */
-        EMULATE_DO_MMIO,      /* kvm_run filled with MMIO request */
-        EMULATE_DO_DCR,       /* kvm_run filled with DCR request */
-        EMULATE_FAIL,         /* can't emulate this instruction */
-};
-
-extern const unsigned char exception_priority[];
-extern const unsigned char priority_exception[];
-
-extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
-extern char kvmppc_handlers_start[];
-extern unsigned long kvmppc_handler_len;
-
-extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
-extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                              unsigned int rt, unsigned int bytes,
-                              int is_bigendian);
-extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                               u32 val, unsigned int bytes, int is_bigendian);
-
-extern int kvmppc_emulate_instruction(struct kvm_run *run,
-                                      struct kvm_vcpu *vcpu);
-extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
-
-extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
-                           u64 asid, u32 flags);
-extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
-                                  gva_t eend, u32 asid);
-extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
-
-extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu);
-
-static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception)
-{
-        unsigned int priority = exception_priority[exception];
-        set_bit(priority, &vcpu->arch.pending_exceptions);
-}
-
-static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception)
-{
-        unsigned int priority = exception_priority[exception];
-        clear_bit(priority, &vcpu->arch.pending_exceptions);
-}
-
-/* Helper function for "full" MSR writes. No need to call this if only EE is
- * changing. */
-static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
-{
-        if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR))
-                kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR);
-
-        vcpu->arch.msr = new_msr;
-
-        if (vcpu->arch.msr & MSR_WE)
-                kvm_vcpu_block(vcpu);
-}
-
-#endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/include/asm-powerpc/libata-portmap.h b/include/asm-powerpc/libata-portmap.h
deleted file mode 100644
index 4d8518049f4d..000000000000
--- a/include/asm-powerpc/libata-portmap.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
-#define __ASM_POWERPC_LIBATA_PORTMAP_H
-
-#define ATA_PRIMARY_CMD 0x1F0
-#define ATA_PRIMARY_CTL 0x3F6
-#define ATA_PRIMARY_IRQ(dev)    pci_get_legacy_ide_irq(dev, 0)
-
-#define ATA_SECONDARY_CMD       0x170
-#define ATA_SECONDARY_CTL       0x376
-#define ATA_SECONDARY_IRQ(dev)  pci_get_legacy_ide_irq(dev, 1)
-
-#endif
diff --git a/include/asm-powerpc/linkage.h b/include/asm-powerpc/linkage.h
deleted file mode 100644
index e1c4ac1cc4ba..000000000000
--- a/include/asm-powerpc/linkage.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_POWERPC_LINKAGE_H
-#define _ASM_POWERPC_LINKAGE_H
-
-/* Nothing to see here... */
-
-#endif  /* _ASM_POWERPC_LINKAGE_H */
diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h
deleted file mode 100644
index 6f5fdf0a19ae..000000000000
--- a/include/asm-powerpc/lmb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_LMB_H
-#define _ASM_POWERPC_LMB_H
-
-#include <asm/udbg.h>
-
-#define LMB_DBG(fmt...) udbg_printf(fmt)
-
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define LMB_REAL_LIMIT  lowmem_end_addr
-#else
-#define LMB_REAL_LIMIT  0
-#endif
-
-#endif /* _ASM_POWERPC_LMB_H */
diff --git a/include/asm-powerpc/local.h b/include/asm-powerpc/local.h
deleted file mode 100644
index 612d83276653..000000000000
--- a/include/asm-powerpc/local.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef _ARCH_POWERPC_LOCAL_H
-#define _ARCH_POWERPC_LOCAL_H
-
-#include <linux/percpu.h>
-#include <asm/atomic.h>
-
-typedef struct
-{
-        atomic_long_t a;
-} local_t;
-
-#define LOCAL_INIT(i)   { ATOMIC_LONG_INIT(i) }
-
-#define local_read(l)   atomic_long_read(&(l)->a)
-#define local_set(l,i)  atomic_long_set(&(l)->a, (i))
-
-#define local_add(i,l)  atomic_long_add((i),(&(l)->a))
-#define local_sub(i,l)  atomic_long_sub((i),(&(l)->a))
-#define local_inc(l)    atomic_long_inc(&(l)->a)
-#define local_dec(l)    atomic_long_dec(&(l)->a)
-
-static __inline__ long local_add_return(long a, local_t *l)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX       "%0,0,%2                # local_add_return\n\
-        add     %0,%1,%0\n"
-        PPC405_ERR77(0,%2)
-        PPC_STLCX       "%0,0,%2 \n\
-        bne-    1b"
-        : "=&r" (t)
-        : "r" (a), "r" (&(l->a.counter))
-        : "cc", "memory");
-
-        return t;
-}
-
-#define local_add_negative(a, l)        (local_add_return((a), (l)) < 0)
-
-static __inline__ long local_sub_return(long a, local_t *l)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX       "%0,0,%2                # local_sub_return\n\
-        subf    %0,%1,%0\n"
-        PPC405_ERR77(0,%2)
-        PPC_STLCX       "%0,0,%2 \n\
-        bne-    1b"
-        : "=&r" (t)
-        : "r" (a), "r" (&(l->a.counter))
-        : "cc", "memory");
-
-        return t;
-}
-
-static __inline__ long local_inc_return(local_t *l)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX       "%0,0,%1                # local_inc_return\n\
-        addic   %0,%0,1\n"
-        PPC405_ERR77(0,%1)
-        PPC_STLCX       "%0,0,%1 \n\
-        bne-    1b"
-        : "=&r" (t)
-        : "r" (&(l->a.counter))
-        : "cc", "memory");
-
-        return t;
-}
-
-/*
- * local_inc_and_test - increment and test
- * @l: pointer of type local_t
- *
- * Atomically increments @l by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define local_inc_and_test(l) (local_inc_return(l) == 0)
-
-static __inline__ long local_dec_return(local_t *l)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX       "%0,0,%1                # local_dec_return\n\
-        addic   %0,%0,-1\n"
-        PPC405_ERR77(0,%1)
-        PPC_STLCX       "%0,0,%1\n\
-        bne-    1b"
-        : "=&r" (t)
-        : "r" (&(l->a.counter))
-        : "cc", "memory");
-
-        return t;
-}
-
-#define local_cmpxchg(l, o, n) \
-        (cmpxchg_local(&((l)->a.counter), (o), (n)))
-#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
-
-/**
- * local_add_unless - add unless the number is a given value
- * @l: pointer of type local_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
- */
-static __inline__ int local_add_unless(local_t *l, long a, long u)
-{
-        long t;
-
-        __asm__ __volatile__ (
-"1:"    PPC_LLARX       "%0,0,%1                # local_add_unless\n\
-        cmpw    0,%0,%3 \n\
-        beq-    2f \n\
-        add     %0,%2,%0 \n"
-        PPC405_ERR77(0,%2)
-        PPC_STLCX       "%0,0,%1 \n\
-        bne-    1b \n"
-"       subf    %0,%2,%0 \n\
-2:"
-        : "=&r" (t)
-        : "r" (&(l->a.counter)), "r" (a), "r" (u)
-        : "cc", "memory");
-
-        return t != u;
-}
-
-#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
-
-#define local_sub_and_test(a, l)        (local_sub_return((a), (l)) == 0)
-#define local_dec_and_test(l)           (local_dec_return((l)) == 0)
-
-/*
- * Atomically test *l and decrement if it is greater than 0.
- * The function returns the old value of *l minus 1.
- */
-static __inline__ long local_dec_if_positive(local_t *l)
-{
-        long t;
-
-        __asm__ __volatile__(
-"1:"    PPC_LLARX       "%0,0,%1                # local_dec_if_positive\n\
-        cmpwi   %0,1\n\
-        addi    %0,%0,-1\n\
-        blt-    2f\n"
-        PPC405_ERR77(0,%1)
-        PPC_STLCX       "%0,0,%1\n\
-        bne-    1b"
-        "\n\
-2:"     : "=&b" (t)
-        : "r" (&(l->a.counter))
-        : "cc", "memory");
-
-        return t;
-}
-
-/* Use these for per-cpu local_t variables: on some archs they are
- * much more efficient than these naive implementations.  Note they take
- * a variable, not an address.
- */
-
-#define __local_inc(l)          ((l)->a.counter++)
-#define __local_dec(l)          ((l)->a.counter++)
-#define __local_add(i,l)        ((l)->a.counter+=(i))
-#define __local_sub(i,l)        ((l)->a.counter-=(i))
-
-/* Need to disable preemption for the cpu local counters otherwise we could
-   still access a variable of a previous CPU in a non atomic way. */
-#define cpu_local_wrap_v(l)             \
-        ({ local_t res__;               \
-           preempt_disable();           \
-           res__ = (l);                 \
-           preempt_enable();            \
-           res__; })
-#define cpu_local_wrap(l)               \
-        ({ preempt_disable();           \
-           l;                           \
-           preempt_enable(); })         \
-
-#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
-#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
-#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
-#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
-#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
-#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
-
-#define __cpu_local_inc(l)      cpu_local_inc(l)
-#define __cpu_local_dec(l)      cpu_local_dec(l)
-#define __cpu_local_add(i, l)   cpu_local_add((i), (l))
-#define __cpu_local_sub(i, l)   cpu_local_sub((i), (l))
-
-#endif /* _ARCH_POWERPC_LOCAL_H */
diff --git a/include/asm-powerpc/lppaca.h b/include/asm-powerpc/lppaca.h
deleted file mode 100644
index 2fe268b10333..000000000000
--- a/include/asm-powerpc/lppaca.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * lppaca.h
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_LPPACA_H
-#define _ASM_POWERPC_LPPACA_H
-#ifdef __KERNEL__
-
-//=============================================================================
-//
-//      This control block contains the data that is shared between the
-//      hypervisor (PLIC) and the OS.
-//
-//
-//----------------------------------------------------------------------------
-#include <linux/cache.h>
-#include <asm/types.h>
-#include <asm/mmu.h>
-
-/* The Hypervisor barfs if the lppaca crosses a page boundary.  A 1k
- * alignment is sufficient to prevent this */
-struct lppaca {
-//=============================================================================
-// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
-// NOTE: The xDynXyz fields are fields that will be dynamically changed by
-// PLIC when preparing to bring a processor online or when dispatching a
-// virtual processor!
-//=============================================================================
-        u32     desc;                   // Eye catcher 0xD397D781       x00-x03
-        u16     size;                   // Size of this struct          x04-x05
-        u16     reserved1;              // Reserved                     x06-x07
-        u16     reserved2:14;           // Reserved                     x08-x09
-        u8      shared_proc:1;          // Shared processor indicator   ...
-        u8      secondary_thread:1;     // Secondary thread indicator   ...
-        volatile u8 dyn_proc_status:8;  // Dynamic Status of this proc  x0A-x0A
-        u8      secondary_thread_count; // Secondary thread count       x0B-x0B
-        volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D
-        volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F
-        u32     decr_val;               // Value for Decr programming   x10-x13
-        u32     pmc_val;                // Value for PMC regs           x14-x17
-        volatile u32 dyn_hw_node_id;    // Dynamic Hardware Node id     x18-x1B
-        volatile u32 dyn_hw_proc_id;    // Dynamic Hardware Proc Id     x1C-x1F
-        volatile u32 dyn_pir;           // Dynamic ProcIdReg value      x20-x23
-        u32     dsei_data;              // DSEI data                    x24-x27
-        u64     sprg3;                  // SPRG3 value                  x28-x2F
-        u8      reserved3[80];          // Reserved                     x30-x7F
-
-//=============================================================================
-// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
-//=============================================================================
-        // This Dword contains a byte for each type of interrupt that can occur.
-        // The IPI is a count while the others are just a binary 1 or 0.
-        union {
-                u64     any_int;
-                struct {
-                        u16     reserved;       // Reserved - cleared by #mpasmbl
-                        u8      xirr_int;       // Indicates xXirrValue is valid or Immed IO
-                        u8      ipi_cnt;        // IPI Count
-                        u8      decr_int;       // DECR interrupt occurred
-                        u8      pdc_int;        // PDC interrupt occurred
-                        u8      quantum_int;    // Interrupt quantum reached
-                        u8      old_plic_deferred_ext_int;      // Old PLIC has a deferred XIRR pending
-                } fields;
-        } int_dword;
-
-        // Whenever any fields in this Dword are set then PLIC will defer the
-        // processing of external interrupts.  Note that PLIC will store the
-        // XIRR directly into the xXirrValue field so that another XIRR will
-        // not be presented until this one clears.  The layout of the low
-        // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
-        // entire Dword is zero or not.  A non-zero value in the low order
-        // 2-bytes will result in SLIC being granted the highest thread
-        // priority upon return.  A 0 will return to SLIC as medium priority.
-        u64     plic_defer_ints_area;   // Entire Dword
-
-        // Used to pass the real SRR0/1 from PLIC to SLIC as well as to
-        // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid.
-        u64     saved_srr0;             // Saved SRR0                   x10-x17
-        u64     saved_srr1;             // Saved SRR1                   x18-x1F
-
-        // Used to pass parms from the OS to PLIC for SetAsrAndRfid
-        u64     saved_gpr3;             // Saved GPR3                   x20-x27
-        u64     saved_gpr4;             // Saved GPR4                   x28-x2F
-        u64     saved_gpr5;             // Saved GPR5                   x30-x37
-
-        u8      reserved4;              // Reserved                     x38-x38
-        u8      donate_dedicated_cpu;   // Donate dedicated CPU cycles  x39-x39
-        u8      fpregs_in_use;          // FP regs in use               x3A-x3A
-        u8      pmcregs_in_use;         // PMC regs in use              x3B-x3B
-        volatile u32 saved_decr;        // Saved Decr Value             x3C-x3F
-        volatile u64 emulated_time_base;// Emulated TB for this thread  x40-x47
-        volatile u64 cur_plic_latency;  // Unaccounted PLIC latency     x48-x4F
-        u64     tot_plic_latency;       // Accumulated PLIC latency     x50-x57
-        u64     wait_state_cycles;      // Wait cycles for this proc    x58-x5F
-        u64     end_of_quantum;         // TB at end of quantum         x60-x67
-        u64     pdc_saved_sprg1;        // Saved SPRG1 for PMC int      x68-x6F
-        u64     pdc_saved_srr0;         // Saved SRR0 for PMC int       x70-x77
-        volatile u32 virtual_decr;      // Virtual DECR for shared procsx78-x7B
-        u16     slb_count;              // # of SLBs to maintain        x7C-x7D
-        u8      idle;                   // Indicate OS is idle          x7E
-        u8      vmxregs_in_use;         // VMX registers in use         x7F
-
-
-//=============================================================================
-// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors
-//=============================================================================
-        // This is the yield_count.  An "odd" value (low bit on) means that
-        // the processor is yielded (either because of an OS yield or a PLIC
-        // preempt).  An even value implies that the processor is currently
-        // executing.
-        // NOTE: This value will ALWAYS be zero for dedicated processors and
-        // will NEVER be zero for shared processors (ie, initialized to a 1).
-        volatile u32 yield_count;       // PLIC increments each dispatchx00-x03
-        u32 reserved6;
-        volatile u64 cmo_faults;        // CMO page fault count         x08-x0F
-        volatile u64 cmo_fault_time;    // CMO page fault time          x10-x17
-        u8      reserved7[104];         // Reserved                     x18-x7F
-
-//=============================================================================
-// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
-//=============================================================================
-        u8      pmc_save_area[256];     // PMC interrupt Area           x00-xFF
-} __attribute__((__aligned__(0x400)));
-
-extern struct lppaca lppaca[];
-
-/*
- * SLB shadow buffer structure as defined in the PAPR.  The save_area
- * contains adjacent ESID and VSID pairs for each shadowed SLB.  The
- * ESID is stored in the lower 64bits, then the VSID.
- */
-struct slb_shadow {
-        u32     persistent;             // Number of persistent SLBs    x00-x03
-        u32     buffer_length;          // Total shadow buffer length   x04-x07
-        u64     reserved;               // Alignment                    x08-x0f
-        struct  {
-                u64     esid;
-                u64     vsid;
-        } save_area[SLB_NUM_BOLTED];    //                              x10-x40
-} ____cacheline_aligned;
-
-extern struct slb_shadow slb_shadow[];
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/include/asm-powerpc/lv1call.h b/include/asm-powerpc/lv1call.h
deleted file mode 100644
index 81713acf7529..000000000000
--- a/include/asm-powerpc/lv1call.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- *  PS3 hvcall interface.
- *
- *  Copyright (C) 2006 Sony Computer Entertainment Inc.
- *  Copyright 2006 Sony Corp.
- *  Copyright 2003, 2004 (c) MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(_ASM_POWERPC_LV1CALL_H)
-#define _ASM_POWERPC_LV1CALL_H
-
-#if !defined(__ASSEMBLY__)
-
-#include <linux/types.h>
-
-/* lv1 call declaration macros */
-
-#define LV1_1_IN_ARG_DECL u64 in_1
-#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2
-#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3
-#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4
-#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5
-#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6
-#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7
-#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8
-#define LV1_1_OUT_ARG_DECL u64 *out_1
-#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2
-#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3
-#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4
-#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5
-#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6
-#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7
-
-#define LV1_0_IN_0_OUT_ARG_DECL void
-#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL
-#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL
-#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL
-#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL
-#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL
-#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL
-#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL
-
-#define LV1_0_IN_1_OUT_ARG_DECL                    LV1_1_OUT_ARG_DECL
-#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-
-#define LV1_0_IN_2_OUT_ARG_DECL                    LV1_2_OUT_ARG_DECL
-#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-
-#define LV1_0_IN_3_OUT_ARG_DECL                    LV1_3_OUT_ARG_DECL
-#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-
-#define LV1_0_IN_4_OUT_ARG_DECL                    LV1_4_OUT_ARG_DECL
-#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-
-#define LV1_0_IN_5_OUT_ARG_DECL                    LV1_5_OUT_ARG_DECL
-#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-
-#define LV1_0_IN_6_OUT_ARG_DECL                    LV1_6_OUT_ARG_DECL
-#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-
-#define LV1_0_IN_7_OUT_ARG_DECL                    LV1_7_OUT_ARG_DECL
-#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-
-#define LV1_1_IN_ARGS in_1
-#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2
-#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3
-#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4
-#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5
-#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6
-#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7
-#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8
-
-#define LV1_1_OUT_ARGS out_1
-#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2
-#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3
-#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4
-#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5
-#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6
-#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7
-
-#define LV1_0_IN_0_OUT_ARGS
-#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS
-#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS
-#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS
-#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS
-#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS
-#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS
-#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS
-
-#define LV1_0_IN_1_OUT_ARGS                LV1_1_OUT_ARGS
-#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS
-
-#define LV1_0_IN_2_OUT_ARGS                LV1_2_OUT_ARGS
-#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS
-
-#define LV1_0_IN_3_OUT_ARGS                LV1_3_OUT_ARGS
-#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS
-
-#define LV1_0_IN_4_OUT_ARGS                LV1_4_OUT_ARGS
-#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS
-
-#define LV1_0_IN_5_OUT_ARGS                LV1_5_OUT_ARGS
-#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS
-
-#define LV1_0_IN_6_OUT_ARGS                LV1_6_OUT_ARGS
-#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS
-
-#define LV1_0_IN_7_OUT_ARGS                LV1_7_OUT_ARGS
-#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS
-
-/*
- * This LV1_CALL() macro is for use by callers.  It expands into an
- * inline call wrapper and an underscored HV call declaration.  The
- * wrapper can be used to instrument the lv1 call interface.  The
- * file lv1call.S defines its own LV1_CALL() macro to expand into
- * the actual underscored call definition.
- */
-
-#if !defined(LV1_CALL)
-#define LV1_CALL(name, in, out, num)                               \
-  extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL);      \
-  static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \
-    {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);}
-#endif
-
-#endif /* !defined(__ASSEMBLY__) */
-
-/* lv1 call table */
-
-LV1_CALL(allocate_memory,                               4, 2,   0 )
-LV1_CALL(write_htab_entry,                              4, 0,   1 )
-LV1_CALL(construct_virtual_address_space,               3, 2,   2 )
-LV1_CALL(invalidate_htab_entries,                       5, 0,   3 )
-LV1_CALL(get_virtual_address_space_id_of_ppe,           1, 1,   4 )
-LV1_CALL(query_logical_partition_address_region_info,   1, 5,   6 )
-LV1_CALL(select_virtual_address_space,                  1, 0,   7 )
-LV1_CALL(pause,                                         1, 0,   9 )
-LV1_CALL(destruct_virtual_address_space,                1, 0,  10 )
-LV1_CALL(configure_irq_state_bitmap,                    3, 0,  11 )
-LV1_CALL(connect_irq_plug_ext,                          5, 0,  12 )
-LV1_CALL(release_memory,                                1, 0,  13 )
-LV1_CALL(put_iopte,                                     5, 0,  15 )
-LV1_CALL(disconnect_irq_plug_ext,                       3, 0,  17 )
-LV1_CALL(construct_event_receive_port,                  0, 1,  18 )
-LV1_CALL(destruct_event_receive_port,                   1, 0,  19 )
-LV1_CALL(send_event_locally,                            1, 0,  24 )
-LV1_CALL(end_of_interrupt,                              1, 0,  27 )
-LV1_CALL(connect_irq_plug,                              2, 0,  28 )
-LV1_CALL(disconnect_irq_plug,                           1, 0,  29 )
-LV1_CALL(end_of_interrupt_ext,                          3, 0,  30 )
-LV1_CALL(did_update_interrupt_mask,                     2, 0,  31 )
-LV1_CALL(shutdown_logical_partition,                    1, 0,  44 )
-LV1_CALL(destruct_logical_spe,                          1, 0,  54 )
-LV1_CALL(construct_logical_spe,                         7, 6,  57 )
-LV1_CALL(set_spe_interrupt_mask,                        3, 0,  61 )
-LV1_CALL(set_spe_transition_notifier,                   3, 0,  64 )
-LV1_CALL(disable_logical_spe,                           2, 0,  65 )
-LV1_CALL(clear_spe_interrupt_status,                    4, 0,  66 )
-LV1_CALL(get_spe_interrupt_status,                      2, 1,  67 )
-LV1_CALL(get_logical_ppe_id,                            0, 1,  69 )
-LV1_CALL(set_interrupt_mask,                            5, 0,  73 )
-LV1_CALL(get_logical_partition_id,                      0, 1,  74 )
-LV1_CALL(configure_execution_time_variable,             1, 0,  77 )
-LV1_CALL(get_spe_irq_outlet,                            2, 1,  78 )
-LV1_CALL(set_spe_privilege_state_area_1_register,       3, 0,  79 )
-LV1_CALL(create_repository_node,                        6, 0,  90 )
-LV1_CALL(get_repository_node_value,                     5, 2,  91 )
-LV1_CALL(modify_repository_node_value,                  6, 0,  92 )
-LV1_CALL(remove_repository_node,                        4, 0,  93 )
-LV1_CALL(read_htab_entries,                             2, 5,  95 )
-LV1_CALL(set_dabr,                                      2, 0,  96 )
-LV1_CALL(get_total_execution_time,                      2, 1, 103 )
-LV1_CALL(allocate_io_segment,                           3, 1, 116 )
-LV1_CALL(release_io_segment,                            2, 0, 117 )
-LV1_CALL(construct_io_irq_outlet,                       1, 1, 120 )
-LV1_CALL(destruct_io_irq_outlet,                        1, 0, 121 )
-LV1_CALL(map_htab,                                      1, 1, 122 )
-LV1_CALL(unmap_htab,                                    1, 0, 123 )
-LV1_CALL(get_version_info,                              0, 1, 127 )
-LV1_CALL(insert_htab_entry,                             6, 3, 158 )
-LV1_CALL(read_virtual_uart,                             3, 1, 162 )
-LV1_CALL(write_virtual_uart,                            3, 1, 163 )
-LV1_CALL(set_virtual_uart_param,                        3, 0, 164 )
-LV1_CALL(get_virtual_uart_param,                        2, 1, 165 )
-LV1_CALL(configure_virtual_uart_irq,                    1, 1, 166 )
-LV1_CALL(open_device,                                   3, 0, 170 )
-LV1_CALL(close_device,                                  2, 0, 171 )
-LV1_CALL(map_device_mmio_region,                        5, 1, 172 )
-LV1_CALL(unmap_device_mmio_region,                      3, 0, 173 )
-LV1_CALL(allocate_device_dma_region,                    5, 1, 174 )
-LV1_CALL(free_device_dma_region,                        3, 0, 175 )
-LV1_CALL(map_device_dma_region,                         6, 0, 176 )
-LV1_CALL(unmap_device_dma_region,                       4, 0, 177 )
-LV1_CALL(net_add_multicast_address,                     4, 0, 185 )
-LV1_CALL(net_remove_multicast_address,                  4, 0, 186 )
-LV1_CALL(net_start_tx_dma,                              4, 0, 187 )
-LV1_CALL(net_stop_tx_dma,                               3, 0, 188 )
-LV1_CALL(net_start_rx_dma,                              4, 0, 189 )
-LV1_CALL(net_stop_rx_dma,                               3, 0, 190 )
-LV1_CALL(net_set_interrupt_status_indicator,            4, 0, 191 )
-LV1_CALL(net_set_interrupt_mask,                        4, 0, 193 )
-LV1_CALL(net_control,                                   6, 2, 194 )
-LV1_CALL(connect_interrupt_event_receive_port,          4, 0, 197 )
-LV1_CALL(disconnect_interrupt_event_receive_port,       4, 0, 198 )
-LV1_CALL(get_spe_all_interrupt_statuses,                1, 1, 199 )
-LV1_CALL(deconfigure_virtual_uart_irq,                  0, 0, 202 )
-LV1_CALL(enable_logical_spe,                            2, 0, 207 )
-LV1_CALL(gpu_open,                                      1, 0, 210 )
-LV1_CALL(gpu_close,                                     0, 0, 211 )
-LV1_CALL(gpu_device_map,                                1, 2, 212 )
-LV1_CALL(gpu_device_unmap,                              1, 0, 213 )
-LV1_CALL(gpu_memory_allocate,                           5, 2, 214 )
-LV1_CALL(gpu_memory_free,                               1, 0, 216 )
-LV1_CALL(gpu_context_allocate,                          2, 5, 217 )
-LV1_CALL(gpu_context_free,                              1, 0, 218 )
-LV1_CALL(gpu_context_iomap,                             5, 0, 221 )
-LV1_CALL(gpu_context_attribute,                         6, 0, 225 )
-LV1_CALL(gpu_context_intr,                              1, 1, 227 )
-LV1_CALL(gpu_attribute,                                 5, 0, 228 )
-LV1_CALL(get_rtc,                                       0, 2, 232 )
-LV1_CALL(set_ppe_periodic_tracer_frequency,             1, 0, 240 )
-LV1_CALL(start_ppe_periodic_tracer,                     5, 0, 241 )
-LV1_CALL(stop_ppe_periodic_tracer,                      1, 1, 242 )
-LV1_CALL(storage_read,                                  6, 1, 245 )
-LV1_CALL(storage_write,                                 6, 1, 246 )
-LV1_CALL(storage_send_device_command,                   6, 1, 248 )
-LV1_CALL(storage_get_async_status,                      1, 2, 249 )
-LV1_CALL(storage_check_async_status,                    2, 1, 254 )
-LV1_CALL(panic,                                         1, 0, 255 )
-LV1_CALL(construct_lpm,                                 6, 3, 140 )
-LV1_CALL(destruct_lpm,                                  1, 0, 141 )
-LV1_CALL(start_lpm,                                     1, 0, 142 )
-LV1_CALL(stop_lpm,                                      1, 1, 143 )
-LV1_CALL(copy_lpm_trace_buffer,                         3, 1, 144 )
-LV1_CALL(add_lpm_event_bookmark,                        5, 0, 145 )
-LV1_CALL(delete_lpm_event_bookmark,                     3, 0, 146 )
-LV1_CALL(set_lpm_interrupt_mask,                        3, 1, 147 )
-LV1_CALL(get_lpm_interrupt_status,                      1, 1, 148 )
-LV1_CALL(set_lpm_general_control,                       5, 2, 149 )
-LV1_CALL(set_lpm_interval,                              3, 1, 150 )
-LV1_CALL(set_lpm_trigger_control,                       3, 1, 151 )
-LV1_CALL(set_lpm_counter_control,                       4, 1, 152 )
-LV1_CALL(set_lpm_group_control,                         3, 1, 153 )
-LV1_CALL(set_lpm_debug_bus_control,                     3, 1, 154 )
-LV1_CALL(set_lpm_counter,                               5, 2, 155 )
-LV1_CALL(set_lpm_signal,                                7, 0, 156 )
-LV1_CALL(set_lpm_spr_trigger,                           2, 0, 157 )
-
-#endif
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
deleted file mode 100644
index 893aafd87fde..000000000000
--- a/include/asm-powerpc/machdep.h
+++ /dev/null
@@ -1,365 +0,0 @@
-#ifndef _ASM_POWERPC_MACHDEP_H
-#define _ASM_POWERPC_MACHDEP_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/setup.h>
-
-/* We export this macro for external modules like Alsa to know if
- * ppc_md.feature_call is implemented or not
- */
-#define CONFIG_PPC_HAS_FEATURE_CALLS
-
-struct pt_regs;
-struct pci_bus; 
-struct device_node;
-struct iommu_table;
-struct rtc_time;
-struct file;
-struct pci_controller;
-#ifdef CONFIG_KEXEC
-struct kimage;
-#endif
-
-#ifdef CONFIG_SMP
-struct smp_ops_t {
-        void  (*message_pass)(int target, int msg);
-        int   (*probe)(void);
-        void  (*kick_cpu)(int nr);
-        void  (*setup_cpu)(int nr);
-        void  (*take_timebase)(void);
-        void  (*give_timebase)(void);
-        int   (*cpu_enable)(unsigned int nr);
-        int   (*cpu_disable)(void);
-        void  (*cpu_die)(unsigned int nr);
-        int   (*cpu_bootable)(unsigned int nr);
-};
-#endif
-
-struct machdep_calls {
-        char            *name;
-#ifdef CONFIG_PPC64
-        void            (*hpte_invalidate)(unsigned long slot,
-                                           unsigned long va,
-                                           int psize, int ssize,
-                                           int local);
-        long            (*hpte_updatepp)(unsigned long slot, 
-                                         unsigned long newpp, 
-                                         unsigned long va,
-                                         int psize, int ssize,
-                                         int local);
-        void            (*hpte_updateboltedpp)(unsigned long newpp, 
-                                               unsigned long ea,
-                                               int psize, int ssize);
-        long            (*hpte_insert)(unsigned long hpte_group,
-                                       unsigned long va,
-                                       unsigned long prpn,
-                                       unsigned long rflags,
-                                       unsigned long vflags,
-                                       int psize, int ssize);
-        long            (*hpte_remove)(unsigned long hpte_group);
-        void            (*hpte_removebolted)(unsigned long ea,
-                                             int psize, int ssize);
-        void            (*flush_hash_range)(unsigned long number, int local);
-
-        /* special for kexec, to be called in real mode, linar mapping is
-         * destroyed as well */
-        void            (*hpte_clear_all)(void);
-
-        int             (*tce_build)(struct iommu_table *tbl,
-                                     long index,
-                                     long npages,
-                                     unsigned long uaddr,
-                                     enum dma_data_direction direction,
-                                     struct dma_attrs *attrs);
-        void            (*tce_free)(struct iommu_table *tbl,
-                                    long index,
-                                    long npages);
-        unsigned long   (*tce_get)(struct iommu_table *tbl,
-                                    long index);
-        void            (*tce_flush)(struct iommu_table *tbl);
-        void            (*pci_dma_dev_setup)(struct pci_dev *dev);
-        void            (*pci_dma_bus_setup)(struct pci_bus *bus);
-
-        void __iomem *  (*ioremap)(phys_addr_t addr, unsigned long size,
-                                   unsigned long flags);
-        void            (*iounmap)(volatile void __iomem *token);
-
-#ifdef CONFIG_PM
-        void            (*iommu_save)(void);
-        void            (*iommu_restore)(void);
-#endif
-#endif /* CONFIG_PPC64 */
-
-        int             (*probe)(void);
-        void            (*setup_arch)(void); /* Optional, may be NULL */
-        void            (*init_early)(void);
-        /* Optional, may be NULL. */
-        void            (*show_cpuinfo)(struct seq_file *m);
-        void            (*show_percpuinfo)(struct seq_file *m, int i);
-
-        void            (*init_IRQ)(void);
-        unsigned int    (*get_irq)(void);
-#ifdef CONFIG_KEXEC
-        void            (*kexec_cpu_down)(int crash_shutdown, int secondary);
-#endif
-
-        /* PCI stuff */
-        /* Called after scanning the bus, before allocating resources */
-        void            (*pcibios_fixup)(void);
-        int             (*pci_probe_mode)(struct pci_bus *);
-        void            (*pci_irq_fixup)(struct pci_dev *dev);
-
-        /* To setup PHBs when using automatic OF platform driver for PCI */
-        int             (*pci_setup_phb)(struct pci_controller *host);
-
-#ifdef CONFIG_PCI_MSI
-        int             (*msi_check_device)(struct pci_dev* dev,
-                                            int nvec, int type);
-        int             (*setup_msi_irqs)(struct pci_dev *dev,
-                                          int nvec, int type);
-        void            (*teardown_msi_irqs)(struct pci_dev *dev);
-#endif
-
-        void            (*restart)(char *cmd);
-        void            (*power_off)(void);
-        void            (*halt)(void);
-        void            (*panic)(char *str);
-        void            (*cpu_die)(void);
-
-        long            (*time_init)(void); /* Optional, may be NULL */
-
-        int             (*set_rtc_time)(struct rtc_time *);
-        void            (*get_rtc_time)(struct rtc_time *);
-        unsigned long   (*get_boot_time)(void);
-        unsigned char   (*rtc_read_val)(int addr);
-        void            (*rtc_write_val)(int addr, unsigned char val);
-
-        void            (*calibrate_decr)(void);
-
-        void            (*progress)(char *, unsigned short);
-
-        /* Interface for platform error logging */
-        void            (*log_error)(char *buf, unsigned int err_type, int fatal);
-
-        unsigned char   (*nvram_read_val)(int addr);
-        void            (*nvram_write_val)(int addr, unsigned char val);
-        ssize_t         (*nvram_write)(char *buf, size_t count, loff_t *index);
-        ssize_t         (*nvram_read)(char *buf, size_t count, loff_t *index);  
-        ssize_t         (*nvram_size)(void);            
-        void            (*nvram_sync)(void);
-
-        /* Exception handlers */
-        int             (*system_reset_exception)(struct pt_regs *regs);
-        int             (*machine_check_exception)(struct pt_regs *regs);
-
-        /* Motherboard/chipset features. This is a kind of general purpose
-         * hook used to control some machine specific features (like reset
-         * lines, chip power control, etc...).
-         */
-        long            (*feature_call)(unsigned int feature, ...);
-
-        /* Get legacy PCI/IDE interrupt mapping */ 
-        int             (*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel);
-        
-        /* Get access protection for /dev/mem */
-        pgprot_t        (*phys_mem_access_prot)(struct file *file,
-                                                unsigned long pfn,
-                                                unsigned long size,
-                                                pgprot_t vma_prot);
-
-        /* Idle loop for this platform, leave empty for default idle loop */
-        void            (*idle_loop)(void);
-
-        /*
-         * Function for waiting for work with reduced power in idle loop;
-         * called with interrupts disabled.
-         */
-        void            (*power_save)(void);
-
-        /* Function to enable performance monitor counters for this
-           platform, called once per cpu. */
-        void            (*enable_pmcs)(void);
-
-        /* Set DABR for this platform, leave empty for default implemenation */
-        int             (*set_dabr)(unsigned long dabr);
-
-#ifdef CONFIG_PPC32     /* XXX for now */
-        /* A general init function, called by ppc_init in init/main.c.
-           May be NULL. */
-        void            (*init)(void);
-
-        void            (*kgdb_map_scc)(void);
-
-        /*
-         * optional PCI "hooks"
-         */
-        /* Called in indirect_* to avoid touching devices */
-        int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
-
-        /* Called at then very end of pcibios_init() */
-        void (*pcibios_after_init)(void);
-
-#endif /* CONFIG_PPC32 */
-
-        /* Called after PPC generic resource fixup to perform
-           machine specific fixups */
-        void (*pcibios_fixup_resources)(struct pci_dev *);
-
-        /* Called for each PCI bus in the system when it's probed */
-        void (*pcibios_fixup_bus)(struct pci_bus *);
-
-        /* Called when pci_enable_device() is called. Returns 0 to
-         * allow assignment/enabling of the device. */
-        int  (*pcibios_enable_device_hook)(struct pci_dev *);
-
-        /* Called to shutdown machine specific hardware not already controlled
-         * by other drivers.
-         */
-        void (*machine_shutdown)(void);
-
-#ifdef CONFIG_KEXEC
-        /* Called to do the minimal shutdown needed to run a kexec'd kernel
-         * to run successfully.
-         * XXX Should we move this one out of kexec scope?
-         */
-        void (*machine_crash_shutdown)(struct pt_regs *regs);
-
-        /* Called to do what every setup is needed on image and the
-         * reboot code buffer. Returns 0 on success.
-         * Provide your own (maybe dummy) implementation if your platform
-         * claims to support kexec.
-         */
-        int (*machine_kexec_prepare)(struct kimage *image);
-
-        /* Called to handle any machine specific cleanup on image */
-        void (*machine_kexec_cleanup)(struct kimage *image);
-
-        /* Called to perform the _real_ kexec.
-         * Do NOT allocate memory or fail here. We are past the point of
-         * no return.
-         */
-        void (*machine_kexec)(struct kimage *image);
-#endif /* CONFIG_KEXEC */
-
-#ifdef CONFIG_SUSPEND
-        /* These are called to disable and enable, respectively, IRQs when
-         * entering a suspend state.  If NULL, then the generic versions
-         * will be called.  The generic versions disable/enable the
-         * decrementer along with interrupts.
-         */
-        void (*suspend_disable_irqs)(void);
-        void (*suspend_enable_irqs)(void);
-#endif
-};
-
-extern void e500_idle(void);
-extern void power4_idle(void);
-extern void power4_cpu_offline_powersave(void);
-extern void ppc6xx_idle(void);
-
-/*
- * ppc_md contains a copy of the machine description structure for the
- * current platform. machine_id contains the initial address where the
- * description was found during boot.
- */
-extern struct machdep_calls ppc_md;
-extern struct machdep_calls *machine_id;
-
-#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
-
-#define define_machine(name)                                    \
-        extern struct machdep_calls mach_##name;                \
-        EXPORT_SYMBOL(mach_##name);                             \
-        struct machdep_calls mach_##name __machine_desc =
-
-#define machine_is(name) \
-        ({ \
-                extern struct machdep_calls mach_##name \
-                        __attribute__((weak));           \
-                machine_id == &mach_##name; \
-        })
-
-extern void probe_machine(void);
-
-extern char cmd_line[COMMAND_LINE_SIZE];
-
-#ifdef CONFIG_PPC_PMAC
-/*
- * Power macintoshes have either a CUDA, PMU or SMU controlling
- * system reset, power, NVRAM, RTC.
- */
-typedef enum sys_ctrler_kind {
-        SYS_CTRLER_UNKNOWN = 0,
-        SYS_CTRLER_CUDA = 1,
-        SYS_CTRLER_PMU = 2,
-        SYS_CTRLER_SMU = 3,
-} sys_ctrler_t;
-extern sys_ctrler_t sys_ctrler;
-
-#endif /* CONFIG_PPC_PMAC */
-
-extern void setup_pci_ptrs(void);
-
-#ifdef CONFIG_SMP
-/* Poor default implementations */
-extern void __devinit smp_generic_give_timebase(void);
-extern void __devinit smp_generic_take_timebase(void);
-#endif /* CONFIG_SMP */
-
-
-/* Functions to produce codes on the leds.
- * The SRC code should be unique for the message category and should
- * be limited to the lower 24 bits (the upper 8 are set by these funcs),
- * and (for boot & dump) should be sorted numerically in the order
- * the events occur.
- */
-/* Print a boot progress message. */
-void ppc64_boot_msg(unsigned int src, const char *msg);
-/* Print a termination message (print only -- does not stop the kernel) */
-void ppc64_terminate_msg(unsigned int src, const char *msg);
-
-static inline void log_error(char *buf, unsigned int err_type, int fatal)
-{
-        if (ppc_md.log_error)
-                ppc_md.log_error(buf, err_type, fatal);
-}
-
-#define __define_machine_initcall(mach,level,fn,id) \
-        static int __init __machine_initcall_##mach##_##fn(void) { \
-                if (machine_is(mach)) return fn(); \
-                return 0; \
-        } \
-        __define_initcall(level,__machine_initcall_##mach##_##fn,id);
-
-#define machine_core_initcall(mach,fn)          __define_machine_initcall(mach,"1",fn,1)
-#define machine_core_initcall_sync(mach,fn)     __define_machine_initcall(mach,"1s",fn,1s)
-#define machine_postcore_initcall(mach,fn)      __define_machine_initcall(mach,"2",fn,2)
-#define machine_postcore_initcall_sync(mach,fn) __define_machine_initcall(mach,"2s",fn,2s)
-#define machine_arch_initcall(mach,fn)          __define_machine_initcall(mach,"3",fn,3)
-#define machine_arch_initcall_sync(mach,fn)     __define_machine_initcall(mach,"3s",fn,3s)
-#define machine_subsys_initcall(mach,fn)        __define_machine_initcall(mach,"4",fn,4)
-#define machine_subsys_initcall_sync(mach,fn)   __define_machine_initcall(mach,"4s",fn,4s)
-#define machine_fs_initcall(mach,fn)            __define_machine_initcall(mach,"5",fn,5)
-#define machine_fs_initcall_sync(mach,fn)       __define_machine_initcall(mach,"5s",fn,5s)
-#define machine_rootfs_initcall(mach,fn)        __define_machine_initcall(mach,"rootfs",fn,rootfs)
-#define machine_device_initcall(mach,fn)        __define_machine_initcall(mach,"6",fn,6)
-#define machine_device_initcall_sync(mach,fn)   __define_machine_initcall(mach,"6s",fn,6s)
-#define machine_late_initcall(mach,fn)          __define_machine_initcall(mach,"7",fn,7)
-#define machine_late_initcall_sync(mach,fn)     __define_machine_initcall(mach,"7s",fn,7s)
-
-void generic_suspend_disable_irqs(void);
-void generic_suspend_enable_irqs(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_MACHDEP_H */
diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h
deleted file mode 100644
index 079c06eae446..000000000000
--- a/include/asm-powerpc/macio.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef __MACIO_ASIC_H__
-#define __MACIO_ASIC_H__
-#ifdef __KERNEL__
-
-#include <linux/of_device.h>
-
-extern struct bus_type macio_bus_type;
-
-/* MacIO device driver is defined later */
-struct macio_driver;
-struct macio_chip;
-
-#define MACIO_DEV_COUNT_RESOURCES       8
-#define MACIO_DEV_COUNT_IRQS            8
-
-/*
- * the macio_bus structure is used to describe a "virtual" bus
- * within a MacIO ASIC. It's typically provided by a macio_pci_asic
- * PCI device, but could be provided differently as well (nubus
- * machines using a fake OF tree).
- *
- * The pdev field can be NULL on non-PCI machines
- */
-struct macio_bus
-{
-        struct macio_chip       *chip;          /* macio_chip (private use) */
-        int                     index;          /* macio chip index in system */
-#ifdef CONFIG_PCI
-        struct pci_dev          *pdev;          /* PCI device hosting this bus */
-#endif
-};
-
-/*
- * the macio_dev structure is used to describe a device
- * within an Apple MacIO ASIC.
- */
-struct macio_dev
-{
-        struct macio_bus        *bus;           /* macio bus this device is on */
-        struct macio_dev        *media_bay;     /* Device is part of a media bay */
-        struct of_device        ofdev;
-        int                     n_resources;
-        struct resource         resource[MACIO_DEV_COUNT_RESOURCES];
-        int                     n_interrupts;
-        struct resource         interrupt[MACIO_DEV_COUNT_IRQS];
-};
-#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
-#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
-
-extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
-extern void macio_dev_put(struct macio_dev *dev);
-
-/*
- * Accessors to resources & interrupts and other device
- * fields
- */
-
-static inline int macio_resource_count(struct macio_dev *dev)
-{
-        return dev->n_resources;
-}
-
-static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
-{
-        return dev->resource[resource_no].start;
-}
-
-static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
-{
-        return dev->resource[resource_no].end;
-}
-
-static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
-{
-        struct resource *res = &dev->resource[resource_no];
-        if (res->start == 0 || res->end == 0 || res->end < res->start)
-                return 0;
-        return res->end - res->start + 1;
-}
-
-extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
-extern void macio_release_resource(struct macio_dev *dev, int resource_no);
-extern int macio_request_resources(struct macio_dev *dev, const char *name);
-extern void macio_release_resources(struct macio_dev *dev);
-
-static inline int macio_irq_count(struct macio_dev *dev)
-{
-        return dev->n_interrupts;
-}
-
-static inline int macio_irq(struct macio_dev *dev, int irq_no)
-{
-        return dev->interrupt[irq_no].start;
-}
-
-static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
-{
-        dev_set_drvdata(&dev->ofdev.dev, data);
-}
-
-static inline void* macio_get_drvdata(struct macio_dev *dev)
-{
-        return dev_get_drvdata(&dev->ofdev.dev);
-}
-
-static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
-{
-        return mdev->ofdev.node;
-}
-
-#ifdef CONFIG_PCI
-static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
-{
-        return mdev->bus->pdev;
-}
-#endif
-
-/*
- * A driver for a mac-io chip based device
- */
-struct macio_driver
-{
-        char                    *name;
-        struct of_device_id     *match_table;
-        struct module           *owner;
-
-        int     (*probe)(struct macio_dev* dev, const struct of_device_id *match);
-        int     (*remove)(struct macio_dev* dev);
-
-        int     (*suspend)(struct macio_dev* dev, pm_message_t state);
-        int     (*resume)(struct macio_dev* dev);
-        int     (*shutdown)(struct macio_dev* dev);
-
-        struct device_driver    driver;
-};
-#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
-
-extern int macio_register_driver(struct macio_driver *);
-extern void macio_unregister_driver(struct macio_driver *);
-
-#endif /* __KERNEL__ */
-#endif /* __MACIO_ASIC_H__ */
diff --git a/include/asm-powerpc/mc146818rtc.h b/include/asm-powerpc/mc146818rtc.h
deleted file mode 100644
index f2741c8b59a1..000000000000
--- a/include/asm-powerpc/mc146818rtc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _ASM_POWERPC_MC146818RTC_H
-#define _ASM_POWERPC_MC146818RTC_H
-
-/*
- * Machine dependent access functions for RTC registers.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __KERNEL__
-
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)     (0x70 + (x))
-#define RTC_ALWAYS_BCD  1       /* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#endif  /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_MC146818RTC_H */
diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h
deleted file mode 100644
index b2efb3325808..000000000000
--- a/include/asm-powerpc/mediabay.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * mediabay.h: definitions for using the media bay
- * on PowerBook 3400 and similar computers.
- *
- * Copyright (C) 1997 Paul Mackerras.
- */
-#ifndef _PPC_MEDIABAY_H
-#define _PPC_MEDIABAY_H
-
-#ifdef __KERNEL__
-
-#define MB_FD           0       /* media bay contains floppy drive (automatic eject ?) */
-#define MB_FD1          1       /* media bay contains floppy drive (manual eject ?) */
-#define MB_SOUND        2       /* sound device ? */
-#define MB_CD           3       /* media bay contains ATA drive such as CD or ZIP */
-#define MB_PCI          5       /* media bay contains a PCI device */
-#define MB_POWER        6       /* media bay contains a Power device (???) */
-#define MB_NO           7       /* media bay contains nothing */
-
-/* Number of bays in the machine or 0 */
-extern int media_bay_count;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-#include <linux/ide.h>
-
-int check_media_bay_by_base(unsigned long base, int what);
-/* called by IDE PMAC host driver to register IDE controller for media bay */
-int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
-                            int irq, ide_hwif_t *hwif);
-
-int check_media_bay(struct device_node *which_bay, int what);
-
-#else
-
-static inline int check_media_bay(struct device_node *which_bay, int what)
-{
-        return -ENODEV;
-}
-
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _PPC_MEDIABAY_H */
diff --git a/include/asm-powerpc/mman.h b/include/asm-powerpc/mman.h
deleted file mode 100644
index 9209f755763e..000000000000
--- a/include/asm-powerpc/mman.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef _ASM_POWERPC_MMAN_H
-#define _ASM_POWERPC_MMAN_H
-
-#include <asm-generic/mman.h>
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define PROT_SAO        0x10            /* Strong Access Ordering */
-
-#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
-#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
-#define MAP_LOCKED      0x80
-
-#define MAP_GROWSDOWN   0x0100          /* stack-like segment */
-#define MAP_DENYWRITE   0x0800          /* ETXTBSY */
-#define MAP_EXECUTABLE  0x1000          /* mark it as an executable */
-
-#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
-#define MCL_FUTURE      0x4000          /* lock all additions to address space */
-
-#define MAP_POPULATE    0x8000          /* populate (prefault) pagetables */
-#define MAP_NONBLOCK    0x10000         /* do not block on IO */
-
-#ifdef __KERNEL__
-#ifdef CONFIG_PPC64
-
-#include <asm/cputable.h>
-#include <linux/mm.h>
-
-/*
- * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits()
- * here.  How important is the optimization?
- */
-static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot)
-{
-        return (prot & PROT_SAO) ? VM_SAO : 0;
-}
-#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot)
-
-static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
-{
-        return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0;
-}
-#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
-
-static inline int arch_validate_prot(unsigned long prot)
-{
-        if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO))
-                return 0;
-        if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO))
-                return 0;
-        return 1;
-}
-#define arch_validate_prot(prot) arch_validate_prot(prot)
-
-#endif /* CONFIG_PPC64 */
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_MMAN_H */
diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h
deleted file mode 100644
index 3d108676584c..000000000000
--- a/include/asm-powerpc/mmu-40x.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_40X_H_
-#define _ASM_POWERPC_MMU_40X_H_
-
-/*
- * PPC40x support
- */
-
-#define PPC40X_TLB_SIZE 64
-
-/*
- * TLB entries are defined by a "high" tag portion and a "low" data
- * portion.  On all architectures, the data portion is 32-bits.
- *
- * TLB entries are managed entirely under software control by reading,
- * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
- * instructions.
- */
-
-#define TLB_LO          1
-#define TLB_HI          0
-
-#define TLB_DATA        TLB_LO
-#define TLB_TAG         TLB_HI
-
-/* Tag portion */
-
-#define TLB_EPN_MASK    0xFFFFFC00      /* Effective Page Number */
-#define TLB_PAGESZ_MASK 0x00000380
-#define TLB_PAGESZ(x)   (((x) & 0x7) << 7)
-#define   PAGESZ_1K             0
-#define   PAGESZ_4K             1
-#define   PAGESZ_16K            2
-#define   PAGESZ_64K            3
-#define   PAGESZ_256K           4
-#define   PAGESZ_1M             5
-#define   PAGESZ_4M             6
-#define   PAGESZ_16M            7
-#define TLB_VALID       0x00000040      /* Entry is valid */
-
-/* Data portion */
-
-#define TLB_RPN_MASK    0xFFFFFC00      /* Real Page Number */
-#define TLB_PERM_MASK   0x00000300
-#define TLB_EX          0x00000200      /* Instruction execution allowed */
-#define TLB_WR          0x00000100      /* Writes permitted */
-#define TLB_ZSEL_MASK   0x000000F0
-#define TLB_ZSEL(x)     (((x) & 0xF) << 4)
-#define TLB_ATTR_MASK   0x0000000F
-#define TLB_W           0x00000008      /* Caching is write-through */
-#define TLB_I           0x00000004      /* Caching is inhibited */
-#define TLB_M           0x00000002      /* Memory is coherent */
-#define TLB_G           0x00000001      /* Memory is guarded from prefetch */
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-        unsigned long id;
-        unsigned long vdso_base;
-} mm_context_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/include/asm-powerpc/mmu-44x.h b/include/asm-powerpc/mmu-44x.h
deleted file mode 100644
index a825524c981a..000000000000
--- a/include/asm-powerpc/mmu-44x.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_44X_H_
-#define _ASM_POWERPC_MMU_44X_H_
-/*
- * PPC440 support
- */
-
-#define PPC44x_MMUCR_TID        0x000000ff
-#define PPC44x_MMUCR_STS        0x00010000
-
-#define PPC44x_TLB_PAGEID       0
-#define PPC44x_TLB_XLAT         1
-#define PPC44x_TLB_ATTRIB       2
-
-/* Page identification fields */
-#define PPC44x_TLB_EPN_MASK     0xfffffc00      /* Effective Page Number */
-#define PPC44x_TLB_VALID        0x00000200      /* Valid flag */
-#define PPC44x_TLB_TS           0x00000100      /* Translation address space */
-#define PPC44x_TLB_1K           0x00000000      /* Page sizes */
-#define PPC44x_TLB_4K           0x00000010
-#define PPC44x_TLB_16K          0x00000020
-#define PPC44x_TLB_64K          0x00000030
-#define PPC44x_TLB_256K         0x00000040
-#define PPC44x_TLB_1M           0x00000050
-#define PPC44x_TLB_16M          0x00000070
-#define PPC44x_TLB_256M         0x00000090
-
-/* Translation fields */
-#define PPC44x_TLB_RPN_MASK     0xfffffc00      /* Real Page Number */
-#define PPC44x_TLB_ERPN_MASK    0x0000000f
-
-/* Storage attribute and access control fields */
-#define PPC44x_TLB_ATTR_MASK    0x0000ff80
-#define PPC44x_TLB_U0           0x00008000      /* User 0 */
-#define PPC44x_TLB_U1           0x00004000      /* User 1 */
-#define PPC44x_TLB_U2           0x00002000      /* User 2 */
-#define PPC44x_TLB_U3           0x00001000      /* User 3 */
-#define PPC44x_TLB_W            0x00000800      /* Caching is write-through */
-#define PPC44x_TLB_I            0x00000400      /* Caching is inhibited */
-#define PPC44x_TLB_M            0x00000200      /* Memory is coherent */
-#define PPC44x_TLB_G            0x00000100      /* Memory is guarded */
-#define PPC44x_TLB_E            0x00000080      /* Memory is guarded */
-
-#define PPC44x_TLB_PERM_MASK    0x0000003f
-#define PPC44x_TLB_UX           0x00000020      /* User execution */
-#define PPC44x_TLB_UW           0x00000010      /* User write */
-#define PPC44x_TLB_UR           0x00000008      /* User read */
-#define PPC44x_TLB_SX           0x00000004      /* Super execution */
-#define PPC44x_TLB_SW           0x00000002      /* Super write */
-#define PPC44x_TLB_SR           0x00000001      /* Super read */
-
-/* Number of TLB entries */
-#define PPC44x_TLB_SIZE         64
-
-#ifndef __ASSEMBLY__
-
-extern unsigned int tlb_44x_hwater;
-
-typedef struct {
-        unsigned long id;
-        unsigned long vdso_base;
-} mm_context_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#ifndef CONFIG_PPC_EARLY_DEBUG_44x
-#define PPC44x_EARLY_TLBS       1
-#else
-#define PPC44x_EARLY_TLBS       2
-#define PPC44x_EARLY_DEBUG_VIRTADDR     (ASM_CONST(0xf0000000) \
-        | (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff))
-#endif
-
-/* Size of the TLBs used for pinning in lowmem */
-#define PPC_PIN_SIZE    (1 << 28)       /* 256M */
-
-#endif /* _ASM_POWERPC_MMU_44X_H_ */
diff --git a/include/asm-powerpc/mmu-8xx.h b/include/asm-powerpc/mmu-8xx.h
deleted file mode 100644
index 9db877eb88db..000000000000
--- a/include/asm-powerpc/mmu-8xx.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_8XX_H_
-#define _ASM_POWERPC_MMU_8XX_H_
-/*
- * PPC8xx support
- */
-
-/* Control/status registers for the MPC8xx.
- * A write operation to these registers causes serialized access.
- * During software tablewalk, the registers used perform mask/shift-add
- * operations when written/read.  A TLB entry is created when the Mx_RPN
- * is written, and the contents of several registers are used to
- * create the entry.
- */
-#define SPRN_MI_CTR     784     /* Instruction TLB control register */
-#define MI_GPM          0x80000000      /* Set domain manager mode */
-#define MI_PPM          0x40000000      /* Set subpage protection */
-#define MI_CIDEF        0x20000000      /* Set cache inhibit when MMU dis */
-#define MI_RSV4I        0x08000000      /* Reserve 4 TLB entries */
-#define MI_PPCS         0x02000000      /* Use MI_RPN prob/priv state */
-#define MI_IDXMASK      0x00001f00      /* TLB index to be loaded */
-#define MI_RESETVAL     0x00000000      /* Value of register at reset */
-
-/* These are the Ks and Kp from the PowerPC books.  For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define SPRN_MI_AP      786
-#define MI_Ks           0x80000000      /* Should not be set */
-#define MI_Kp           0x40000000      /* Should always be set */
-
-/* The effective page number register.  When read, contains the information
- * about the last instruction TLB miss.  When MI_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define SPRN_MI_EPN     787
-#define MI_EPNMASK      0xfffff000      /* Effective page number for entry */
-#define MI_EVALID       0x00000200      /* Entry is valid */
-#define MI_ASIDMASK     0x0000000f      /* ASID match value */
-                                        /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the instruction TLB, it contains bits that get loaded into the
- * TLB entry when the MI_RPN is written.
- */
-#define SPRN_MI_TWC     789
-#define MI_APG          0x000001e0      /* Access protection group (0) */
-#define MI_GUARDED      0x00000010      /* Guarded storage */
-#define MI_PSMASK       0x0000000c      /* Mask of page size bits */
-#define MI_PS8MEG       0x0000000c      /* 8M page size */
-#define MI_PS512K       0x00000004      /* 512K page size */
-#define MI_PS4K_16K     0x00000000      /* 4K or 16K page size */
-#define MI_SVALID       0x00000001      /* Segment entry is valid */
-                                        /* Reset value is undefined */
-
-/* Real page number.  Defined by the pte.  Writing this register
- * causes a TLB entry to be created for the instruction TLB, using
- * additional information from the MI_EPN, and MI_TWC registers.
- */
-#define SPRN_MI_RPN     790
-
-/* Define an RPN value for mapping kernel memory to large virtual
- * pages for boot initialization.  This has real page number of 0,
- * large page size, shared page, cache enabled, and valid.
- * Also mark all subpages valid and write access.
- */
-#define MI_BOOTINIT     0x000001fd
-
-#define SPRN_MD_CTR     792     /* Data TLB control register */
-#define MD_GPM          0x80000000      /* Set domain manager mode */
-#define MD_PPM          0x40000000      /* Set subpage protection */
-#define MD_CIDEF        0x20000000      /* Set cache inhibit when MMU dis */
-#define MD_WTDEF        0x10000000      /* Set writethrough when MMU dis */
-#define MD_RSV4I        0x08000000      /* Reserve 4 TLB entries */
-#define MD_TWAM         0x04000000      /* Use 4K page hardware assist */
-#define MD_PPCS         0x02000000      /* Use MI_RPN prob/priv state */
-#define MD_IDXMASK      0x00001f00      /* TLB index to be loaded */
-#define MD_RESETVAL     0x04000000      /* Value of register at reset */
-
-#define SPRN_M_CASID    793     /* Address space ID (context) to match */
-#define MC_ASIDMASK     0x0000000f      /* Bits used for ASID value */
-
-
-/* These are the Ks and Kp from the PowerPC books.  For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define SPRN_MD_AP      794
-#define MD_Ks           0x80000000      /* Should not be set */
-#define MD_Kp           0x40000000      /* Should always be set */
-
-/* The effective page number register.  When read, contains the information
- * about the last instruction TLB miss.  When MD_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define SPRN_MD_EPN     795
-#define MD_EPNMASK      0xfffff000      /* Effective page number for entry */
-#define MD_EVALID       0x00000200      /* Entry is valid */
-#define MD_ASIDMASK     0x0000000f      /* ASID match value */
-                                        /* Reset value is undefined */
-
-/* The pointer to the base address of the first level page table.
- * During a software tablewalk, reading this register provides the address
- * of the entry associated with MD_EPN.
- */
-#define SPRN_M_TWB      796
-#define M_L1TB          0xfffff000      /* Level 1 table base address */
-#define M_L1INDX        0x00000ffc      /* Level 1 index, when read */
-                                        /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the data TLB, it contains bits that get loaded into the TLB entry
- * when the MD_RPN is written.  It is also provides the hardware assist
- * for finding the PTE address during software tablewalk.
- */
-#define SPRN_MD_TWC     797
-#define MD_L2TB         0xfffff000      /* Level 2 table base address */
-#define MD_L2INDX       0xfffffe00      /* Level 2 index (*pte), when read */
-#define MD_APG          0x000001e0      /* Access protection group (0) */
-#define MD_GUARDED      0x00000010      /* Guarded storage */
-#define MD_PSMASK       0x0000000c      /* Mask of page size bits */
-#define MD_PS8MEG       0x0000000c      /* 8M page size */
-#define MD_PS512K       0x00000004      /* 512K page size */
-#define MD_PS4K_16K     0x00000000      /* 4K or 16K page size */
-#define MD_WT           0x00000002      /* Use writethrough page attribute */
-#define MD_SVALID       0x00000001      /* Segment entry is valid */
-                                        /* Reset value is undefined */
-
-
-/* Real page number.  Defined by the pte.  Writing this register
- * causes a TLB entry to be created for the data TLB, using
- * additional information from the MD_EPN, and MD_TWC registers.
- */
-#define SPRN_MD_RPN     798
-
-/* This is a temporary storage register that could be used to save
- * a processor working register during a tablewalk.
- */
-#define SPRN_M_TW       799
-
-#ifndef __ASSEMBLY__
-typedef struct {
-        unsigned long id;
-        unsigned long vdso_base;
-} mm_context_t;
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/include/asm-powerpc/mmu-fsl-booke.h
deleted file mode 100644
index 925d93cf64d8..000000000000
--- a/include/asm-powerpc/mmu-fsl-booke.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_
-#define _ASM_POWERPC_MMU_FSL_BOOKE_H_
-/*
- * Freescale Book-E MMU support
- */
-
-/* Book-E defined page sizes */
-#define BOOKE_PAGESZ_1K         0
-#define BOOKE_PAGESZ_4K         1
-#define BOOKE_PAGESZ_16K        2
-#define BOOKE_PAGESZ_64K        3
-#define BOOKE_PAGESZ_256K       4
-#define BOOKE_PAGESZ_1M         5
-#define BOOKE_PAGESZ_4M         6
-#define BOOKE_PAGESZ_16M        7
-#define BOOKE_PAGESZ_64M        8
-#define BOOKE_PAGESZ_256M       9
-#define BOOKE_PAGESZ_1GB        10
-#define BOOKE_PAGESZ_4GB        11
-#define BOOKE_PAGESZ_16GB       12
-#define BOOKE_PAGESZ_64GB       13
-#define BOOKE_PAGESZ_256GB      14
-#define BOOKE_PAGESZ_1TB        15
-
-#define MAS0_TLBSEL(x)  ((x << 28) & 0x30000000)
-#define MAS0_ESEL(x)    ((x << 16) & 0x0FFF0000)
-#define MAS0_NV(x)      ((x) & 0x00000FFF)
-
-#define MAS1_VALID      0x80000000
-#define MAS1_IPROT      0x40000000
-#define MAS1_TID(x)     ((x << 16) & 0x3FFF0000)
-#define MAS1_TS         0x00001000
-#define MAS1_TSIZE(x)   ((x << 8) & 0x00000F00)
-
-#define MAS2_EPN        0xFFFFF000
-#define MAS2_X0         0x00000040
-#define MAS2_X1         0x00000020
-#define MAS2_W          0x00000010
-#define MAS2_I          0x00000008
-#define MAS2_M          0x00000004
-#define MAS2_G          0x00000002
-#define MAS2_E          0x00000001
-
-#define MAS3_RPN        0xFFFFF000
-#define MAS3_U0         0x00000200
-#define MAS3_U1         0x00000100
-#define MAS3_U2         0x00000080
-#define MAS3_U3         0x00000040
-#define MAS3_UX         0x00000020
-#define MAS3_SX         0x00000010
-#define MAS3_UW         0x00000008
-#define MAS3_SW         0x00000004
-#define MAS3_UR         0x00000002
-#define MAS3_SR         0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_TIDDSEL    0x000F0000
-#define MAS4_TSIZED(x)  MAS1_TSIZE(x)
-#define MAS4_X0D        0x00000040
-#define MAS4_X1D        0x00000020
-#define MAS4_WD         0x00000010
-#define MAS4_ID         0x00000008
-#define MAS4_MD         0x00000004
-#define MAS4_GD         0x00000002
-#define MAS4_ED         0x00000001
-
-#define MAS6_SPID0      0x3FFF0000
-#define MAS6_SPID1      0x00007FFE
-#define MAS6_SAS        0x00000001
-#define MAS6_SPID       MAS6_SPID0
-
-#define MAS7_RPN        0xFFFFFFFF
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-        unsigned long id;
-        unsigned long vdso_base;
-} mm_context_t;
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */
diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h
deleted file mode 100644
index 16b1a1e77e64..000000000000
--- a/include/asm-powerpc/mmu-hash32.h
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_HASH32_H_
-#define _ASM_POWERPC_MMU_HASH32_H_
-/*
- * 32-bit hash table MMU support
- */
-
-/*
- * BATs
- */
-
-/* Block size masks */
-#define BL_128K 0x000
-#define BL_256K 0x001
-#define BL_512K 0x003
-#define BL_1M   0x007
-#define BL_2M   0x00F
-#define BL_4M   0x01F
-#define BL_8M   0x03F
-#define BL_16M  0x07F
-#define BL_32M  0x0FF
-#define BL_64M  0x1FF
-#define BL_128M 0x3FF
-#define BL_256M 0x7FF
-
-/* BAT Access Protection */
-#define BPP_XX  0x00            /* No access */
-#define BPP_RX  0x01            /* Read only */
-#define BPP_RW  0x02            /* Read/write */
-
-#ifndef __ASSEMBLY__
-/* Contort a phys_addr_t into the right format/bits for a BAT */
-#ifdef CONFIG_PHYS_64BIT
-#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \
-                                ((x & 0x0000000e00000000ULL) >> 24) | \
-                                ((x & 0x0000000100000000ULL) >> 30)))
-#else
-#define BAT_PHYS_ADDR(x) (x)
-#endif
-
-struct ppc_bat {
-        u32 batu;
-        u32 batl;
-};
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Hash table
- */
-
-/* Values for PP (assumes Ks=0, Kp=1) */
-#define PP_RWXX 0       /* Supervisor read/write, User none */
-#define PP_RWRX 1       /* Supervisor read/write, User read */
-#define PP_RWRW 2       /* Supervisor read/write, User read/write */
-#define PP_RXRX 3       /* Supervisor read,       User read */
-
-#ifndef __ASSEMBLY__
-
-/* Hardware Page Table Entry */
-struct hash_pte {
-        unsigned long v:1;      /* Entry is valid */
-        unsigned long vsid:24;  /* Virtual segment identifier */
-        unsigned long h:1;      /* Hash algorithm indicator */
-        unsigned long api:6;    /* Abbreviated page index */
-        unsigned long rpn:20;   /* Real (physical) page number */
-        unsigned long    :3;    /* Unused */
-        unsigned long r:1;      /* Referenced */
-        unsigned long c:1;      /* Changed */
-        unsigned long w:1;      /* Write-thru cache mode */
-        unsigned long i:1;      /* Cache inhibited */
-        unsigned long m:1;      /* Memory coherence */
-        unsigned long g:1;      /* Guarded */
-        unsigned long  :1;      /* Unused */
-        unsigned long pp:2;     /* Page protection */
-};
-
-typedef struct {
-        unsigned long id;
-        unsigned long vdso_base;
-} mm_context_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
deleted file mode 100644
index 19c7a9403490..000000000000
--- a/include/asm-powerpc/mmu-hash64.h
+++ /dev/null
@@ -1,478 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_HASH64_H_
-#define _ASM_POWERPC_MMU_HASH64_H_
-/*
- * PowerPC64 memory management structures
- *
- * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com>
- *   PPC64 rework.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm-compat.h>
-#include <asm/page.h>
-
-/*
- * Segment table
- */
-
-#define STE_ESID_V      0x80
-#define STE_ESID_KS     0x20
-#define STE_ESID_KP     0x10
-#define STE_ESID_N      0x08
-
-#define STE_VSID_SHIFT  12
-
-/* Location of cpu0's segment table */
-#define STAB0_PAGE      0x6
-#define STAB0_OFFSET    (STAB0_PAGE << 12)
-#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START)
-
-#ifndef __ASSEMBLY__
-extern char initial_stab[];
-#endif /* ! __ASSEMBLY */
-
-/*
- * SLB
- */
-
-#define SLB_NUM_BOLTED          3
-#define SLB_CACHE_ENTRIES       8
-
-/* Bits in the SLB ESID word */
-#define SLB_ESID_V              ASM_CONST(0x0000000008000000) /* valid */
-
-/* Bits in the SLB VSID word */
-#define SLB_VSID_SHIFT          12
-#define SLB_VSID_SHIFT_1T       24
-#define SLB_VSID_SSIZE_SHIFT    62
-#define SLB_VSID_B              ASM_CONST(0xc000000000000000)
-#define SLB_VSID_B_256M         ASM_CONST(0x0000000000000000)
-#define SLB_VSID_B_1T           ASM_CONST(0x4000000000000000)
-#define SLB_VSID_KS             ASM_CONST(0x0000000000000800)
-#define SLB_VSID_KP             ASM_CONST(0x0000000000000400)
-#define SLB_VSID_N              ASM_CONST(0x0000000000000200) /* no-execute */
-#define SLB_VSID_L              ASM_CONST(0x0000000000000100)
-#define SLB_VSID_C              ASM_CONST(0x0000000000000080) /* class */
-#define SLB_VSID_LP             ASM_CONST(0x0000000000000030)
-#define SLB_VSID_LP_00          ASM_CONST(0x0000000000000000)
-#define SLB_VSID_LP_01          ASM_CONST(0x0000000000000010)
-#define SLB_VSID_LP_10          ASM_CONST(0x0000000000000020)
-#define SLB_VSID_LP_11          ASM_CONST(0x0000000000000030)
-#define SLB_VSID_LLP            (SLB_VSID_L|SLB_VSID_LP)
-
-#define SLB_VSID_KERNEL         (SLB_VSID_KP)
-#define SLB_VSID_USER           (SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C)
-
-#define SLBIE_C                 (0x08000000)
-#define SLBIE_SSIZE_SHIFT       25
-
-/*
- * Hash table
- */
-
-#define HPTES_PER_GROUP 8
-
-#define HPTE_V_SSIZE_SHIFT      62
-#define HPTE_V_AVPN_SHIFT       7
-#define HPTE_V_AVPN             ASM_CONST(0x3fffffffffffff80)
-#define HPTE_V_AVPN_VAL(x)      (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT)
-#define HPTE_V_COMPARE(x,y)     (!(((x) ^ (y)) & 0xffffffffffffff80UL))
-#define HPTE_V_BOLTED           ASM_CONST(0x0000000000000010)
-#define HPTE_V_LOCK             ASM_CONST(0x0000000000000008)
-#define HPTE_V_LARGE            ASM_CONST(0x0000000000000004)
-#define HPTE_V_SECONDARY        ASM_CONST(0x0000000000000002)
-#define HPTE_V_VALID            ASM_CONST(0x0000000000000001)
-
-#define HPTE_R_PP0              ASM_CONST(0x8000000000000000)
-#define HPTE_R_TS               ASM_CONST(0x4000000000000000)
-#define HPTE_R_RPN_SHIFT        12
-#define HPTE_R_RPN              ASM_CONST(0x3ffffffffffff000)
-#define HPTE_R_FLAGS            ASM_CONST(0x00000000000003ff)
-#define HPTE_R_PP               ASM_CONST(0x0000000000000003)
-#define HPTE_R_N                ASM_CONST(0x0000000000000004)
-#define HPTE_R_C                ASM_CONST(0x0000000000000080)
-#define HPTE_R_R                ASM_CONST(0x0000000000000100)
-
-#define HPTE_V_1TB_SEG          ASM_CONST(0x4000000000000000)
-#define HPTE_V_VRMA_MASK        ASM_CONST(0x4001ffffff000000)
-
-/* Values for PP (assumes Ks=0, Kp=1) */
-/* pp0 will always be 0 for linux     */
-#define PP_RWXX 0       /* Supervisor read/write, User none */
-#define PP_RWRX 1       /* Supervisor read/write, User read */
-#define PP_RWRW 2       /* Supervisor read/write, User read/write */
-#define PP_RXRX 3       /* Supervisor read,       User read */
-
-#ifndef __ASSEMBLY__
-
-struct hash_pte {
-        unsigned long v;
-        unsigned long r;
-};
-
-extern struct hash_pte *htab_address;
-extern unsigned long htab_size_bytes;
-extern unsigned long htab_hash_mask;
-
-/*
- * Page size definition
- *
- *    shift : is the "PAGE_SHIFT" value for that page size
- *    sllp  : is a bit mask with the value of SLB L || LP to be or'ed
- *            directly to a slbmte "vsid" value
- *    penc  : is the HPTE encoding mask for the "LP" field:
- *
- */
-struct mmu_psize_def
-{
-        unsigned int    shift;  /* number of bits */
-        unsigned int    penc;   /* HPTE encoding */
-        unsigned int    tlbiel; /* tlbiel supported for that page size */
-        unsigned long   avpnm;  /* bits to mask out in AVPN in the HPTE */
-        unsigned long   sllp;   /* SLB L||LP (exact mask to use in slbmte) */
-};
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The kernel use the constants below to index in the page sizes array.
- * The use of fixed constants for this purpose is better for performances
- * of the low level hash refill handlers.
- *
- * A non supported page size has a "shift" field set to 0
- *
- * Any new page size being implemented can get a new entry in here. Whether
- * the kernel will use it or not is a different matter though. The actual page
- * size used by hugetlbfs is not defined here and may be made variable
- */
-
-#define MMU_PAGE_4K             0       /* 4K */
-#define MMU_PAGE_64K            1       /* 64K */
-#define MMU_PAGE_64K_AP         2       /* 64K Admixed (in a 4K segment) */
-#define MMU_PAGE_1M             3       /* 1M */
-#define MMU_PAGE_16M            4       /* 16M */
-#define MMU_PAGE_16G            5       /* 16G */
-#define MMU_PAGE_COUNT          6
-
-/*
- * Segment sizes.
- * These are the values used by hardware in the B field of
- * SLB entries and the first dword of MMU hashtable entries.
- * The B field is 2 bits; the values 2 and 3 are unused and reserved.
- */
-#define MMU_SEGSIZE_256M        0
-#define MMU_SEGSIZE_1T          1
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * The current system page and segment sizes
- */
-extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
-extern int mmu_linear_psize;
-extern int mmu_virtual_psize;
-extern int mmu_vmalloc_psize;
-extern int mmu_vmemmap_psize;
-extern int mmu_io_psize;
-extern int mmu_kernel_ssize;
-extern int mmu_highuser_ssize;
-extern u16 mmu_slb_size;
-extern unsigned long tce_alloc_start, tce_alloc_end;
-
-/*
- * If the processor supports 64k normal pages but not 64k cache
- * inhibited pages, we have to be prepared to switch processes
- * to use 4k pages when they create cache-inhibited mappings.
- * If this is the case, mmu_ci_restrictions will be set to 1.
- */
-extern int mmu_ci_restrictions;
-
-#ifdef CONFIG_HUGETLB_PAGE
-/*
- * The page size indexes of the huge pages for use by hugetlbfs
- */
-extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT];
-
-#endif /* CONFIG_HUGETLB_PAGE */
-
-/*
- * This function sets the AVPN and L fields of the HPTE  appropriately
- * for the page size
- */
-static inline unsigned long hpte_encode_v(unsigned long va, int psize,
-                                          int ssize)
-{
-        unsigned long v;
-        v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
-        v <<= HPTE_V_AVPN_SHIFT;
-        if (psize != MMU_PAGE_4K)
-                v |= HPTE_V_LARGE;
-        v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
-        return v;
-}
-
-/*
- * This function sets the ARPN, and LP fields of the HPTE appropriately
- * for the page size. We assume the pa is already "clean" that is properly
- * aligned for the requested page size
- */
-static inline unsigned long hpte_encode_r(unsigned long pa, int psize)
-{
-        unsigned long r;
-
-        /* A 4K page needs no special encoding */
-        if (psize == MMU_PAGE_4K)
-                return pa & HPTE_R_RPN;
-        else {
-                unsigned int penc = mmu_psize_defs[psize].penc;
-                unsigned int shift = mmu_psize_defs[psize].shift;
-                return (pa & ~((1ul << shift) - 1)) | (penc << 12);
-        }
-        return r;
-}
-
-/*
- * Build a VA given VSID, EA and segment size
- */
-static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid,
-                                   int ssize)
-{
-        if (ssize == MMU_SEGSIZE_256M)
-                return (vsid << 28) | (ea & 0xfffffffUL);
-        return (vsid << 40) | (ea & 0xffffffffffUL);
-}
-
-/*
- * This hashes a virtual address
- */
-
-static inline unsigned long hpt_hash(unsigned long va, unsigned int shift,
-                                     int ssize)
-{
-        unsigned long hash, vsid;
-
-        if (ssize == MMU_SEGSIZE_256M) {
-                hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift);
-        } else {
-                vsid = va >> 40;
-                hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift);
-        }
-        return hash & 0x7fffffffffUL;
-}
-
-extern int __hash_page_4K(unsigned long ea, unsigned long access,
-                          unsigned long vsid, pte_t *ptep, unsigned long trap,
-                          unsigned int local, int ssize, int subpage_prot);
-extern int __hash_page_64K(unsigned long ea, unsigned long access,
-                           unsigned long vsid, pte_t *ptep, unsigned long trap,
-                           unsigned int local, int ssize);
-struct mm_struct;
-extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
-extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
-                          unsigned long ea, unsigned long vsid, int local,
-                          unsigned long trap);
-
-extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-                             unsigned long pstart, unsigned long mode,
-                             int psize, int ssize);
-extern void set_huge_psize(int psize);
-extern void add_gpage(unsigned long addr, unsigned long page_size,
-                          unsigned long number_of_pages);
-extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
-
-extern void htab_initialize(void);
-extern void htab_initialize_secondary(void);
-extern void hpte_init_native(void);
-extern void hpte_init_lpar(void);
-extern void hpte_init_iSeries(void);
-extern void hpte_init_beat(void);
-extern void hpte_init_beat_v3(void);
-
-extern void stabs_alloc(void);
-extern void slb_initialize(void);
-extern void slb_flush_and_rebolt(void);
-extern void stab_initialize(unsigned long stab);
-
-extern void slb_vmalloc_update(void);
-#endif /* __ASSEMBLY__ */
-
-/*
- * VSID allocation
- *
- * We first generate a 36-bit "proto-VSID".  For kernel addresses this
- * is equal to the ESID, for user addresses it is:
- *      (context << 15) | (esid & 0x7fff)
- *
- * The two forms are distinguishable because the top bit is 0 for user
- * addresses, whereas the top two bits are 1 for kernel addresses.
- * Proto-VSIDs with the top two bits equal to 0b10 are reserved for
- * now.
- *
- * The proto-VSIDs are then scrambled into real VSIDs with the
- * multiplicative hash:
- *
- *      VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS
- *      where   VSID_MULTIPLIER = 268435399 = 0xFFFFFC7
- *              VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF
- *
- * This scramble is only well defined for proto-VSIDs below
- * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are
- * reserved.  VSID_MULTIPLIER is prime, so in particular it is
- * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
- * Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
- *
- * This scheme has several advantages over older methods:
- *
- *      - We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
- *
- *      - We allow for 15 significant bits of ESID and 20 bits of
- * context for user addresses.  i.e. 8T (43 bits) of address space for
- * up to 1M contexts (although the page table structure and context
- * allocation will need changes to take advantage of this).
- *
- *      - The scramble function gives robust scattering in the hash
- * table (at least based on some initial results).  The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
- */
-/*
- * WARNING - If you change these you must make sure the asm
- * implementations in slb_allocate (slb_low.S), do_stab_bolted
- * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly.
- *
- * You'll also need to change the precomputed VSID values in head.S
- * which are used by the iSeries firmware.
- */
-
-#define VSID_MULTIPLIER_256M    ASM_CONST(200730139)    /* 28-bit prime */
-#define VSID_BITS_256M          36
-#define VSID_MODULUS_256M       ((1UL<<VSID_BITS_256M)-1)
-
-#define VSID_MULTIPLIER_1T      ASM_CONST(12538073)     /* 24-bit prime */
-#define VSID_BITS_1T            24
-#define VSID_MODULUS_1T         ((1UL<<VSID_BITS_1T)-1)
-
-#define CONTEXT_BITS            19
-#define USER_ESID_BITS          16
-#define USER_ESID_BITS_1T       4
-
-#define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT))
-
-/*
- * This macro generates asm code to compute the VSID scramble
- * function.  Used in slb_allocate() and do_stab_bolted.  The function
- * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
- *
- *      rt = register continaing the proto-VSID and into which the
- *              VSID will be stored
- *      rx = scratch register (clobbered)
- *
- *      - rt and rx must be different registers
- *      - The answer will end up in the low VSID_BITS bits of rt.  The higher
- *        bits may contain other garbage, so you may need to mask the
- *        result.
- */
-#define ASM_VSID_SCRAMBLE(rt, rx, size)                                 \
-        lis     rx,VSID_MULTIPLIER_##size@h;                            \
-        ori     rx,rx,VSID_MULTIPLIER_##size@l;                         \
-        mulld   rt,rt,rx;               /* rt = rt * MULTIPLIER */      \
-                                                                        \
-        srdi    rx,rt,VSID_BITS_##size;                                 \
-        clrldi  rt,rt,(64-VSID_BITS_##size);                            \
-        add     rt,rt,rx;               /* add high and low bits */     \
-        /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and         \
-         * 2^36-1+2^28-1.  That in particular means that if r3 >=       \
-         * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has     \
-         * the bit clear, r3 already has the answer we want, if it      \
-         * doesn't, the answer is the low 36 bits of r3+1.  So in all   \
-         * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
-        addi    rx,rt,1;                                                \
-        srdi    rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */   \
-        add     rt,rt,rx
-
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_context_id_t;
-
-typedef struct {
-        mm_context_id_t id;
-        u16 user_psize;         /* page size index */
-
-#ifdef CONFIG_PPC_MM_SLICES
-        u64 low_slices_psize;   /* SLB page size encodings */
-        u64 high_slices_psize;  /* 4 bits per slice for now */
-#else
-        u16 sllp;               /* SLB page size encoding */
-#endif
-        unsigned long vdso_base;
-} mm_context_t;
-
-
-#if 0
-/*
- * The code below is equivalent to this function for arguments
- * < 2^VSID_BITS, which is all this should ever be called
- * with.  However gcc is not clever enough to compute the
- * modulus (2^n-1) without a second multiply.
- */
-#define vsid_scrample(protovsid, size) \
-        ((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size))
-
-#else /* 1 */
-#define vsid_scramble(protovsid, size) \
-        ({                                                               \
-                unsigned long x;                                         \
-                x = (protovsid) * VSID_MULTIPLIER_##size;                \
-                x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \
-                (x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \
-        })
-#endif /* 1 */
-
-/* This is only valid for addresses >= KERNELBASE */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
-        if (ssize == MMU_SEGSIZE_256M)
-                return vsid_scramble(ea >> SID_SHIFT, 256M);
-        return vsid_scramble(ea >> SID_SHIFT_1T, 1T);
-}
-
-/* Returns the segment size indicator for a user address */
-static inline int user_segment_size(unsigned long addr)
-{
-        /* Use 1T segments if possible for addresses >= 1T */
-        if (addr >= (1UL << SID_SHIFT_1T))
-                return mmu_highuser_ssize;
-        return MMU_SEGSIZE_256M;
-}
-
-/* This is only valid for user addresses (which are below 2^44) */
-static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
-                                     int ssize)
-{
-        if (ssize == MMU_SEGSIZE_256M)
-                return vsid_scramble((context << USER_ESID_BITS)
-                                     | (ea >> SID_SHIFT), 256M);
-        return vsid_scramble((context << USER_ESID_BITS_1T)
-                             | (ea >> SID_SHIFT_1T), 1T);
-}
-
-/*
- * This is only used on legacy iSeries in lparmap.c,
- * hence the 256MB segment assumption.
- */
-#define VSID_SCRAMBLE(pvsid)    (((pvsid) * VSID_MULTIPLIER_256M) %     \
-                                 VSID_MODULUS_256M)
-#define KERNEL_VSID(ea)         VSID_SCRAMBLE(GET_ESID(ea))
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h
deleted file mode 100644
index 4c0e1b4f975c..000000000000
--- a/include/asm-powerpc/mmu.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_H_
-#define _ASM_POWERPC_MMU_H_
-#ifdef __KERNEL__
-
-#ifdef CONFIG_PPC64
-/* 64-bit classic hash table MMU */
-#  include <asm/mmu-hash64.h>
-#elif defined(CONFIG_PPC_STD_MMU)
-/* 32-bit classic hash table MMU */
-#  include <asm/mmu-hash32.h>
-#elif defined(CONFIG_40x)
-/* 40x-style software loaded TLB */
-#  include <asm/mmu-40x.h>
-#elif defined(CONFIG_44x)
-/* 44x-style software loaded TLB */
-#  include <asm/mmu-44x.h>
-#elif defined(CONFIG_FSL_BOOKE)
-/* Freescale Book-E software loaded TLB */
-#  include <asm/mmu-fsl-booke.h>
-#elif defined (CONFIG_PPC_8xx)
-/* Motorola/Freescale 8xx software loaded TLB */
-#  include <asm/mmu-8xx.h>
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h
deleted file mode 100644
index 9102b8bf0ead..000000000000
--- a/include/asm-powerpc/mmu_context.h
+++ /dev/null
@@ -1,280 +0,0 @@
-#ifndef __ASM_POWERPC_MMU_CONTEXT_H
-#define __ASM_POWERPC_MMU_CONTEXT_H
-#ifdef __KERNEL__
-
-#include <asm/mmu.h>    
-#include <asm/cputable.h>
-#include <asm-generic/mm_hooks.h>
-
-#ifndef CONFIG_PPC64
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-
-/*
- * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
- * (virtual segment identifiers) for each context.  Although the
- * hardware supports 24-bit VSIDs, and thus >1 million contexts,
- * we only use 32,768 of them.  That is ample, since there can be
- * at most around 30,000 tasks in the system anyway, and it means
- * that we can use a bitmap to indicate which contexts are in use.
- * Using a bitmap means that we entirely avoid all of the problems
- * that we used to have when the context number overflowed,
- * particularly on SMP systems.
- *  -- paulus.
- */
-
-/*
- * This function defines the mapping from contexts to VSIDs (virtual
- * segment IDs).  We use a skew on both the context and the high 4 bits
- * of the 32-bit virtual address (the "effective segment ID") in order
- * to spread out the entries in the MMU hash table.  Note, if this
- * function is changed then arch/ppc/mm/hashtable.S will have to be
- * changed to correspond.
- */
-#define CTX_TO_VSID(ctx, va)    (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
-                                 & 0xffffff)
-
-/*
-   The MPC8xx has only 16 contexts.  We rotate through them on each
-   task switch.  A better way would be to keep track of tasks that
-   own contexts, and implement an LRU usage.  That way very active
-   tasks don't always have to pay the TLB reload overhead.  The
-   kernel pages are mapped shared, so the kernel can run on behalf
-   of any task that makes a kernel entry.  Shared does not mean they
-   are not protected, just that the ASID comparison is not performed.
-        -- Dan
-
-   The IBM4xx has 256 contexts, so we can just rotate through these
-   as a way of "switching" contexts.  If the TID of the TLB is zero,
-   the PID/TID comparison is disabled, so we can use a TID of zero
-   to represent all kernel pages as shared among all contexts.
-        -- Dan
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifdef CONFIG_8xx
-#define NO_CONTEXT              16
-#define LAST_CONTEXT            15
-#define FIRST_CONTEXT           0
-
-#elif defined(CONFIG_4xx)
-#define NO_CONTEXT              256
-#define LAST_CONTEXT            255
-#define FIRST_CONTEXT           1
-
-#elif defined(CONFIG_E200) || defined(CONFIG_E500)
-#define NO_CONTEXT              256
-#define LAST_CONTEXT            255
-#define FIRST_CONTEXT           1
-
-#else
-
-/* PPC 6xx, 7xx CPUs */
-#define NO_CONTEXT              ((unsigned long) -1)
-#define LAST_CONTEXT            32767
-#define FIRST_CONTEXT           1
-#endif
-
-/*
- * Set the current MMU context.
- * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
- * loading up the segment registers for the user part of the address space.
- *
- * Since the PGD is immediately available, it is much faster to simply
- * pass this along as a second parameter, which is required for 8xx and
- * can be used for debugging on all processors (if you happen to have
- * an Abatron).
- */
-extern void set_context(unsigned long contextid, pgd_t *pgd);
-
-/*
- * Bitmap of contexts in use.
- * The size of this bitmap is LAST_CONTEXT + 1 bits.
- */
-extern unsigned long context_map[];
-
-/*
- * This caches the next context number that we expect to be free.
- * Its use is an optimization only, we can't rely on this context
- * number to be free, but it usually will be.
- */
-extern unsigned long next_mmu_context;
-
-/*
- * If we don't have sufficient contexts to give one to every task
- * that could be in the system, we need to be able to steal contexts.
- * These variables support that.
- */
-#if LAST_CONTEXT < 30000
-#define FEW_CONTEXTS    1
-extern atomic_t nr_free_contexts;
-extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern void steal_context(void);
-#endif
-
-/*
- * Get a new mmu context for the address space described by `mm'.
- */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
-        unsigned long ctx;
-
-        if (mm->context.id != NO_CONTEXT)
-                return;
-#ifdef FEW_CONTEXTS
-        while (atomic_dec_if_positive(&nr_free_contexts) < 0)
-                steal_context();
-#endif
-        ctx = next_mmu_context;
-        while (test_and_set_bit(ctx, context_map)) {
-                ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
-                if (ctx > LAST_CONTEXT)
-                        ctx = 0;
-        }
-        next_mmu_context = (ctx + 1) & LAST_CONTEXT;
-        mm->context.id = ctx;
-#ifdef FEW_CONTEXTS
-        context_mm[ctx] = mm;
-#endif
-}
-
-/*
- * Set up the context for a new address space.
- */
-static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
-{
-        mm->context.id = NO_CONTEXT;
-        mm->context.vdso_base = 0;
-        return 0;
-}
-
-/*
- * We're finished using the context for an address space.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-        preempt_disable();
-        if (mm->context.id != NO_CONTEXT) {
-                clear_bit(mm->context.id, context_map);
-                mm->context.id = NO_CONTEXT;
-#ifdef FEW_CONTEXTS
-                atomic_inc(&nr_free_contexts);
-#endif
-        }
-        preempt_enable();
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-                             struct task_struct *tsk)
-{
-#ifdef CONFIG_ALTIVEC
-        if (cpu_has_feature(CPU_FTR_ALTIVEC))
-        asm volatile ("dssall;\n"
-#ifndef CONFIG_POWER4
-         "sync;\n" /* G4 needs a sync here, G5 apparently not */
-#endif
-         : : );
-#endif /* CONFIG_ALTIVEC */
-
-        tsk->thread.pgdir = next->pgd;
-
-        /* No need to flush userspace segments if the mm doesnt change */
-        if (prev == next)
-                return;
-
-        /* Setup new userspace context */
-        get_mmu_context(next);
-        set_context(next->context.id, next->pgd);
-}
-
-#define deactivate_mm(tsk,mm)   do { } while (0)
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-#define activate_mm(active_mm, mm)   switch_mm(active_mm, mm, current)
-
-extern void mmu_context_init(void);
-
-
-#else
-
-#include <linux/kernel.h>       
-#include <linux/mm.h>   
-#include <linux/sched.h>
-
-/*
- * Copyright (C) 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm,
-                                  struct task_struct *tsk)
-{
-}
-
-/*
- * The proto-VSID space has 2^35 - 1 segments available for user mappings.
- * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
- * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
- */
-#define NO_CONTEXT      0
-#define MAX_CONTEXT     ((1UL << 19) - 1)
-
-extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-extern void destroy_context(struct mm_struct *mm);
-
-extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
-extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
-
-/*
- * switch_mm is the entry point called from the architecture independent
- * code in kernel/sched.c
- */
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-                             struct task_struct *tsk)
-{
-        if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
-                cpu_set(smp_processor_id(), next->cpu_vm_mask);
-
-        /* No need to flush userspace segments if the mm doesnt change */
-        if (prev == next)
-                return;
-
-#ifdef CONFIG_ALTIVEC
-        if (cpu_has_feature(CPU_FTR_ALTIVEC))
-                asm volatile ("dssall");
-#endif /* CONFIG_ALTIVEC */
-
-        if (cpu_has_feature(CPU_FTR_SLB))
-                switch_slb(tsk, next);
-        else
-                switch_stab(tsk, next);
-}
-
-#define deactivate_mm(tsk,mm)   do { } while (0)
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
-{
-        unsigned long flags;
-
-        local_irq_save(flags);
-        switch_mm(prev, next, current);
-        local_irq_restore(flags);
-}
-
-#endif /* CONFIG_PPC64 */
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/include/asm-powerpc/mmzone.h b/include/asm-powerpc/mmzone.h
deleted file mode 100644
index 19f299b7e256..000000000000
--- a/include/asm-powerpc/mmzone.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
- *
- * PowerPC64 port:
- * Copyright (C) 2002 Anton Blanchard, IBM Corp.
- */
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
-#ifdef __KERNEL__
-
-
-/*
- * generic non-linear memory support:
- *
- * 1) we will not split memory into more chunks than will fit into the
- *    flags field of the struct page
- */
-
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-
-extern struct pglist_data *node_data[];
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)          (node_data[nid])
-
-/*
- * Following are specific to this numa platform.
- */
-
-extern int numa_cpu_lookup_table[];
-extern cpumask_t numa_cpumask_lookup_table[];
-#ifdef CONFIG_MEMORY_HOTPLUG
-extern unsigned long max_pfn;
-#endif
-
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid)     (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)       (NODE_DATA(nid)->node_end_pfn)
-
-#endif /* CONFIG_NEED_MULTIPLE_NODES */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-powerpc/module.h b/include/asm-powerpc/module.h
deleted file mode 100644
index e5f14b13ccf0..000000000000
--- a/include/asm-powerpc/module.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _ASM_POWERPC_MODULE_H
-#define _ASM_POWERPC_MODULE_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/list.h>
-#include <asm/bug.h>
-
-
-#ifndef __powerpc64__
-/*
- * Thanks to Paul M for explaining this.
- *
- * PPC can only do rel jumps += 32MB, and often the kernel and other
- * modules are furthur away than this.  So, we jump to a table of
- * trampolines attached to the module (the Procedure Linkage Table)
- * whenever that happens.
- */
-
-struct ppc_plt_entry {
-        /* 16 byte jump instruction sequence (4 instructions) */
-        unsigned int jump[4];
-};
-#endif  /* __powerpc64__ */
-
-
-struct mod_arch_specific {
-#ifdef __powerpc64__
-        unsigned int stubs_section;     /* Index of stubs section in module */
-        unsigned int toc_section;       /* What section is the TOC? */
-#else
-        /* Indices of PLT sections within module. */
-        unsigned int core_plt_section;
-        unsigned int init_plt_section;
-#endif
-
-        /* List of BUG addresses, source line numbers and filenames */
-        struct list_head bug_list;
-        struct bug_entry *bug_table;
-        unsigned int num_bugs;
-};
-
-/*
- * Select ELF headers.
- * Make empty section for module_frob_arch_sections to expand.
- */
-
-#ifdef __powerpc64__
-#    define Elf_Shdr    Elf64_Shdr
-#    define Elf_Sym     Elf64_Sym
-#    define Elf_Ehdr    Elf64_Ehdr
-#    ifdef MODULE
-        asm(".section .stubs,\"ax\",@nobits; .align 3; .previous");
-#    endif
-#else
-#    define Elf_Shdr    Elf32_Shdr
-#    define Elf_Sym     Elf32_Sym
-#    define Elf_Ehdr    Elf32_Ehdr
-#    ifdef MODULE
-        asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
-        asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
-#    endif      /* MODULE */
-#endif
-
-
-struct exception_table_entry;
-void sort_ex_table(struct exception_table_entry *start,
-                   struct exception_table_entry *finish);
-
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_MODULE_H */
diff --git a/include/asm-powerpc/mpc512x.h b/include/asm-powerpc/mpc512x.h
deleted file mode 100644
index c48a1658eeac..000000000000
--- a/include/asm-powerpc/mpc512x.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007
- *
- * Description:
- * MPC5121 Prototypes and definitions
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_POWERPC_MPC512x_H__
-#define __ASM_POWERPC_MPC512x_H__
-
-extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
-
-#endif /* __ASM_POWERPC_MPC512x_H__ */
-
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
deleted file mode 100644
index 81ef10b6b672..000000000000
--- a/include/asm-powerpc/mpc52xx.h
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
- * May need to be cleaned as the port goes on ...
- *
- * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_POWERPC_MPC52xx_H__
-#define __ASM_POWERPC_MPC52xx_H__
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-#include <asm/prom.h>
-#endif /* __ASSEMBLY__ */
-
-#include <linux/suspend.h>
-
-/* Variants of the 5200(B) */
-#define MPC5200_SVR             0x80110010
-#define MPC5200_SVR_MASK        0xfffffff0
-#define MPC5200B_SVR            0x80110020
-#define MPC5200B_SVR_MASK       0xfffffff0
-
-/* ======================================================================== */
-/* Structures mapping of some unit register set                             */
-/* ======================================================================== */
-
-#ifndef __ASSEMBLY__
-
-/* Memory Mapping Control */
-struct mpc52xx_mmap_ctl {
-        u32 mbar;               /* MMAP_CTRL + 0x00 */
-
-        u32 cs0_start;          /* MMAP_CTRL + 0x04 */
-        u32 cs0_stop;           /* MMAP_CTRL + 0x08 */
-        u32 cs1_start;          /* MMAP_CTRL + 0x0c */
-        u32 cs1_stop;           /* MMAP_CTRL + 0x10 */
-        u32 cs2_start;          /* MMAP_CTRL + 0x14 */
-        u32 cs2_stop;           /* MMAP_CTRL + 0x18 */
-        u32 cs3_start;          /* MMAP_CTRL + 0x1c */
-        u32 cs3_stop;           /* MMAP_CTRL + 0x20 */
-        u32 cs4_start;          /* MMAP_CTRL + 0x24 */
-        u32 cs4_stop;           /* MMAP_CTRL + 0x28 */
-        u32 cs5_start;          /* MMAP_CTRL + 0x2c */
-        u32 cs5_stop;           /* MMAP_CTRL + 0x30 */
-
-        u32 sdram0;             /* MMAP_CTRL + 0x34 */
-        u32 sdram1;             /* MMAP_CTRL + 0X38 */
-
-        u32 reserved[4];        /* MMAP_CTRL + 0x3c .. 0x48 */
-
-        u32 boot_start;         /* MMAP_CTRL + 0x4c */
-        u32 boot_stop;          /* MMAP_CTRL + 0x50 */
-
-        u32 ipbi_ws_ctrl;       /* MMAP_CTRL + 0x54 */
-
-        u32 cs6_start;          /* MMAP_CTRL + 0x58 */
-        u32 cs6_stop;           /* MMAP_CTRL + 0x5c */
-        u32 cs7_start;          /* MMAP_CTRL + 0x60 */
-        u32 cs7_stop;           /* MMAP_CTRL + 0x64 */
-};
-
-/* SDRAM control */
-struct mpc52xx_sdram {
-        u32 mode;               /* SDRAM + 0x00 */
-        u32 ctrl;               /* SDRAM + 0x04 */
-        u32 config1;            /* SDRAM + 0x08 */
-        u32 config2;            /* SDRAM + 0x0c */
-};
-
-/* SDMA */
-struct mpc52xx_sdma {
-        u32 taskBar;            /* SDMA + 0x00 */
-        u32 currentPointer;     /* SDMA + 0x04 */
-        u32 endPointer;         /* SDMA + 0x08 */
-        u32 variablePointer;    /* SDMA + 0x0c */
-
-        u8 IntVect1;            /* SDMA + 0x10 */
-        u8 IntVect2;            /* SDMA + 0x11 */
-        u16 PtdCntrl;           /* SDMA + 0x12 */
-
-        u32 IntPend;            /* SDMA + 0x14 */
-        u32 IntMask;            /* SDMA + 0x18 */
-
-        u16 tcr[16];            /* SDMA + 0x1c .. 0x3a */
-
-        u8 ipr[32];             /* SDMA + 0x3c .. 0x5b */
-
-        u32 cReqSelect;         /* SDMA + 0x5c */
-        u32 task_size0;         /* SDMA + 0x60 */
-        u32 task_size1;         /* SDMA + 0x64 */
-        u32 MDEDebug;           /* SDMA + 0x68 */
-        u32 ADSDebug;           /* SDMA + 0x6c */
-        u32 Value1;             /* SDMA + 0x70 */
-        u32 Value2;             /* SDMA + 0x74 */
-        u32 Control;            /* SDMA + 0x78 */
-        u32 Status;             /* SDMA + 0x7c */
-        u32 PTDDebug;           /* SDMA + 0x80 */
-};
-
-/* GPT */
-struct mpc52xx_gpt {
-        u32 mode;               /* GPTx + 0x00 */
-        u32 count;              /* GPTx + 0x04 */
-        u32 pwm;                /* GPTx + 0x08 */
-        u32 status;             /* GPTx + 0X0c */
-};
-
-/* GPIO */
-struct mpc52xx_gpio {
-        u32 port_config;        /* GPIO + 0x00 */
-        u32 simple_gpioe;       /* GPIO + 0x04 */
-        u32 simple_ode;         /* GPIO + 0x08 */
-        u32 simple_ddr;         /* GPIO + 0x0c */
-        u32 simple_dvo;         /* GPIO + 0x10 */
-        u32 simple_ival;        /* GPIO + 0x14 */
-        u8 outo_gpioe;          /* GPIO + 0x18 */
-        u8 reserved1[3];        /* GPIO + 0x19 */
-        u8 outo_dvo;            /* GPIO + 0x1c */
-        u8 reserved2[3];        /* GPIO + 0x1d */
-        u8 sint_gpioe;          /* GPIO + 0x20 */
-        u8 reserved3[3];        /* GPIO + 0x21 */
-        u8 sint_ode;            /* GPIO + 0x24 */
-        u8 reserved4[3];        /* GPIO + 0x25 */
-        u8 sint_ddr;            /* GPIO + 0x28 */
-        u8 reserved5[3];        /* GPIO + 0x29 */
-        u8 sint_dvo;            /* GPIO + 0x2c */
-        u8 reserved6[3];        /* GPIO + 0x2d */
-        u8 sint_inten;          /* GPIO + 0x30 */
-        u8 reserved7[3];        /* GPIO + 0x31 */
-        u16 sint_itype;         /* GPIO + 0x34 */
-        u16 reserved8;          /* GPIO + 0x36 */
-        u8 gpio_control;        /* GPIO + 0x38 */
-        u8 reserved9[3];        /* GPIO + 0x39 */
-        u8 sint_istat;          /* GPIO + 0x3c */
-        u8 sint_ival;           /* GPIO + 0x3d */
-        u8 bus_errs;            /* GPIO + 0x3e */
-        u8 reserved10;          /* GPIO + 0x3f */
-};
-
-#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4
-#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD    5
-#define MPC52xx_GPIO_PCI_DIS                    (1<<15)
-
-/* GPIO with WakeUp*/
-struct mpc52xx_gpio_wkup {
-        u8 wkup_gpioe;          /* GPIO_WKUP + 0x00 */
-        u8 reserved1[3];        /* GPIO_WKUP + 0x03 */
-        u8 wkup_ode;            /* GPIO_WKUP + 0x04 */
-        u8 reserved2[3];        /* GPIO_WKUP + 0x05 */
-        u8 wkup_ddr;            /* GPIO_WKUP + 0x08 */
-        u8 reserved3[3];        /* GPIO_WKUP + 0x09 */
-        u8 wkup_dvo;            /* GPIO_WKUP + 0x0C */
-        u8 reserved4[3];        /* GPIO_WKUP + 0x0D */
-        u8 wkup_inten;          /* GPIO_WKUP + 0x10 */
-        u8 reserved5[3];        /* GPIO_WKUP + 0x11 */
-        u8 wkup_iinten;         /* GPIO_WKUP + 0x14 */
-        u8 reserved6[3];        /* GPIO_WKUP + 0x15 */
-        u16 wkup_itype;         /* GPIO_WKUP + 0x18 */
-        u8 reserved7[2];        /* GPIO_WKUP + 0x1A */
-        u8 wkup_maste;          /* GPIO_WKUP + 0x1C */
-        u8 reserved8[3];        /* GPIO_WKUP + 0x1D */
-        u8 wkup_ival;           /* GPIO_WKUP + 0x20 */
-        u8 reserved9[3];        /* GPIO_WKUP + 0x21 */
-        u8 wkup_istat;          /* GPIO_WKUP + 0x24 */
-        u8 reserved10[3];       /* GPIO_WKUP + 0x25 */
-};
-
-/* XLB Bus control */
-struct mpc52xx_xlb {
-        u8 reserved[0x40];
-        u32 config;             /* XLB + 0x40 */
-        u32 version;            /* XLB + 0x44 */
-        u32 status;             /* XLB + 0x48 */
-        u32 int_enable;         /* XLB + 0x4c */
-        u32 addr_capture;       /* XLB + 0x50 */
-        u32 bus_sig_capture;    /* XLB + 0x54 */
-        u32 addr_timeout;       /* XLB + 0x58 */
-        u32 data_timeout;       /* XLB + 0x5c */
-        u32 bus_act_timeout;    /* XLB + 0x60 */
-        u32 master_pri_enable;  /* XLB + 0x64 */
-        u32 master_priority;    /* XLB + 0x68 */
-        u32 base_address;       /* XLB + 0x6c */
-        u32 snoop_window;       /* XLB + 0x70 */
-};
-
-#define MPC52xx_XLB_CFG_PLDIS           (1 << 31)
-#define MPC52xx_XLB_CFG_SNOOP           (1 << 15)
-
-/* Clock Distribution control */
-struct mpc52xx_cdm {
-        u32 jtag_id;            /* CDM + 0x00  reg0 read only */
-        u32 rstcfg;             /* CDM + 0x04  reg1 read only */
-        u32 breadcrumb;         /* CDM + 0x08  reg2 */
-
-        u8 mem_clk_sel;         /* CDM + 0x0c  reg3 byte0 */
-        u8 xlb_clk_sel;         /* CDM + 0x0d  reg3 byte1 read only */
-        u8 ipb_clk_sel;         /* CDM + 0x0e  reg3 byte2 */
-        u8 pci_clk_sel;         /* CDM + 0x0f  reg3 byte3 */
-
-        u8 ext_48mhz_en;        /* CDM + 0x10  reg4 byte0 */
-        u8 fd_enable;           /* CDM + 0x11  reg4 byte1 */
-        u16 fd_counters;        /* CDM + 0x12  reg4 byte2,3 */
-
-        u32 clk_enables;        /* CDM + 0x14  reg5 */
-
-        u8 osc_disable;         /* CDM + 0x18  reg6 byte0 */
-        u8 reserved0[3];        /* CDM + 0x19  reg6 byte1,2,3 */
-
-        u8 ccs_sleep_enable;    /* CDM + 0x1c  reg7 byte0 */
-        u8 osc_sleep_enable;    /* CDM + 0x1d  reg7 byte1 */
-        u8 reserved1;           /* CDM + 0x1e  reg7 byte2 */
-        u8 ccs_qreq_test;       /* CDM + 0x1f  reg7 byte3 */
-
-        u8 soft_reset;          /* CDM + 0x20  u8 byte0 */
-        u8 no_ckstp;            /* CDM + 0x21  u8 byte0 */
-        u8 reserved2[2];        /* CDM + 0x22  u8 byte1,2,3 */
-
-        u8 pll_lock;            /* CDM + 0x24  reg9 byte0 */
-        u8 pll_looselock;       /* CDM + 0x25  reg9 byte1 */
-        u8 pll_sm_lockwin;      /* CDM + 0x26  reg9 byte2 */
-        u8 reserved3;           /* CDM + 0x27  reg9 byte3 */
-
-        u16 reserved4;          /* CDM + 0x28  reg10 byte0,1 */
-        u16 mclken_div_psc1;    /* CDM + 0x2a  reg10 byte2,3 */
-
-        u16 reserved5;          /* CDM + 0x2c  reg11 byte0,1 */
-        u16 mclken_div_psc2;    /* CDM + 0x2e  reg11 byte2,3 */
-
-        u16 reserved6;          /* CDM + 0x30  reg12 byte0,1 */
-        u16 mclken_div_psc3;    /* CDM + 0x32  reg12 byte2,3 */
-
-        u16 reserved7;          /* CDM + 0x34  reg13 byte0,1 */
-        u16 mclken_div_psc6;    /* CDM + 0x36  reg13 byte2,3 */
-};
-
-#endif /* __ASSEMBLY__ */
-
-
-/* ========================================================================= */
-/* Prototypes for MPC52xx sysdev                                             */
-/* ========================================================================= */
-
-#ifndef __ASSEMBLY__
-
-/* mpc52xx_common.c */
-extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
-extern void mpc5200_setup_xlb_arbiter(void);
-extern void mpc52xx_declare_of_platform_devices(void);
-extern void mpc52xx_map_common_devices(void);
-extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
-extern void mpc52xx_restart(char *cmd);
-
-/* mpc52xx_pic.c */
-extern void mpc52xx_init_irq(void);
-extern unsigned int mpc52xx_get_irq(void);
-
-/* mpc52xx_pci.c */
-#ifdef CONFIG_PCI
-extern int __init mpc52xx_add_bridge(struct device_node *node);
-extern void __init mpc52xx_setup_pci(void);
-#else
-static inline void mpc52xx_setup_pci(void) { }
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_PM
-struct mpc52xx_suspend {
-        void (*board_suspend_prepare)(void __iomem *mbar);
-        void (*board_resume_finish)(void __iomem *mbar);
-};
-
-extern struct mpc52xx_suspend mpc52xx_suspend;
-extern int __init mpc52xx_pm_init(void);
-extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
-
-#ifdef CONFIG_PPC_LITE5200
-extern int __init lite5200_pm_init(void);
-
-/* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(void);
-extern int mpc52xx_pm_enter(suspend_state_t);
-extern void mpc52xx_pm_finish(void);
-extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
-#endif
-#endif /* CONFIG_PM */
-
-#endif /* __ASM_POWERPC_MPC52xx_H__ */
-
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
deleted file mode 100644
index 8917ed630565..000000000000
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * include/asm-ppc/mpc52xx_psc.h
- *
- * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
- * PSCs. Theses are shared between multiple drivers since a PSC can be
- * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based/Extracted from some header of the 2.4 originally written by
- * Dale Farnsworth <dfarnsworth@mvista.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_MPC52xx_PSC_H__
-#define __ASM_MPC52xx_PSC_H__
-
-#include <asm/types.h>
-
-/* Max number of PSCs */
-#define MPC52xx_PSC_MAXNUM      6
-
-/* Programmable Serial Controller (PSC) status register bits */
-#define MPC52xx_PSC_SR_CDE      0x0080
-#define MPC52xx_PSC_SR_RXRDY    0x0100
-#define MPC52xx_PSC_SR_RXFULL   0x0200
-#define MPC52xx_PSC_SR_TXRDY    0x0400
-#define MPC52xx_PSC_SR_TXEMP    0x0800
-#define MPC52xx_PSC_SR_OE       0x1000
-#define MPC52xx_PSC_SR_PE       0x2000
-#define MPC52xx_PSC_SR_FE       0x4000
-#define MPC52xx_PSC_SR_RB       0x8000
-
-/* PSC Command values */
-#define MPC52xx_PSC_RX_ENABLE           0x0001
-#define MPC52xx_PSC_RX_DISABLE          0x0002
-#define MPC52xx_PSC_TX_ENABLE           0x0004
-#define MPC52xx_PSC_TX_DISABLE          0x0008
-#define MPC52xx_PSC_SEL_MODE_REG_1      0x0010
-#define MPC52xx_PSC_RST_RX              0x0020
-#define MPC52xx_PSC_RST_TX              0x0030
-#define MPC52xx_PSC_RST_ERR_STAT        0x0040
-#define MPC52xx_PSC_RST_BRK_CHG_INT     0x0050
-#define MPC52xx_PSC_START_BRK           0x0060
-#define MPC52xx_PSC_STOP_BRK            0x0070
-
-/* PSC TxRx FIFO status bits */
-#define MPC52xx_PSC_RXTX_FIFO_ERR       0x0040
-#define MPC52xx_PSC_RXTX_FIFO_UF        0x0020
-#define MPC52xx_PSC_RXTX_FIFO_OF        0x0010
-#define MPC52xx_PSC_RXTX_FIFO_FR        0x0008
-#define MPC52xx_PSC_RXTX_FIFO_FULL      0x0004
-#define MPC52xx_PSC_RXTX_FIFO_ALARM     0x0002
-#define MPC52xx_PSC_RXTX_FIFO_EMPTY     0x0001
-
-/* PSC interrupt status/mask bits */
-#define MPC52xx_PSC_IMR_TXRDY           0x0100
-#define MPC52xx_PSC_IMR_RXRDY           0x0200
-#define MPC52xx_PSC_IMR_DB              0x0400
-#define MPC52xx_PSC_IMR_TXEMP           0x0800
-#define MPC52xx_PSC_IMR_ORERR           0x1000
-#define MPC52xx_PSC_IMR_IPC             0x8000
-
-/* PSC input port change bit */
-#define MPC52xx_PSC_CTS                 0x01
-#define MPC52xx_PSC_DCD                 0x02
-#define MPC52xx_PSC_D_CTS               0x10
-#define MPC52xx_PSC_D_DCD               0x20
-
-/* PSC mode fields */
-#define MPC52xx_PSC_MODE_5_BITS                 0x00
-#define MPC52xx_PSC_MODE_6_BITS                 0x01
-#define MPC52xx_PSC_MODE_7_BITS                 0x02
-#define MPC52xx_PSC_MODE_8_BITS                 0x03
-#define MPC52xx_PSC_MODE_BITS_MASK              0x03
-#define MPC52xx_PSC_MODE_PAREVEN                0x00
-#define MPC52xx_PSC_MODE_PARODD                 0x04
-#define MPC52xx_PSC_MODE_PARFORCE               0x08
-#define MPC52xx_PSC_MODE_PARNONE                0x10
-#define MPC52xx_PSC_MODE_ERR                    0x20
-#define MPC52xx_PSC_MODE_FFULL                  0x40
-#define MPC52xx_PSC_MODE_RXRTS                  0x80
-
-#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS        0x00
-#define MPC52xx_PSC_MODE_ONE_STOP               0x07
-#define MPC52xx_PSC_MODE_TWO_STOP               0x0f
-
-#define MPC52xx_PSC_RFNUM_MASK  0x01ff
-
-#define MPC52xx_PSC_SICR_DTS1                   (1 << 29)
-#define MPC52xx_PSC_SICR_SHDR                   (1 << 28)
-#define MPC52xx_PSC_SICR_SIM_MASK               (0xf << 24)
-#define MPC52xx_PSC_SICR_SIM_UART               (0x0 << 24)
-#define MPC52xx_PSC_SICR_SIM_UART_DCD           (0x8 << 24)
-#define MPC52xx_PSC_SICR_SIM_CODEC_8            (0x1 << 24)
-#define MPC52xx_PSC_SICR_SIM_CODEC_16           (0x2 << 24)
-#define MPC52xx_PSC_SICR_SIM_AC97               (0x3 << 24)
-#define MPC52xx_PSC_SICR_SIM_SIR                (0x8 << 24)
-#define MPC52xx_PSC_SICR_SIM_SIR_DCD            (0xc << 24)
-#define MPC52xx_PSC_SICR_SIM_MIR                (0x5 << 24)
-#define MPC52xx_PSC_SICR_SIM_FIR                (0x6 << 24)
-#define MPC52xx_PSC_SICR_SIM_CODEC_24           (0x7 << 24)
-#define MPC52xx_PSC_SICR_SIM_CODEC_32           (0xf << 24)
-#define MPC52xx_PSC_SICR_GENCLK                 (1 << 23)
-#define MPC52xx_PSC_SICR_I2S                    (1 << 22)
-#define MPC52xx_PSC_SICR_CLKPOL                 (1 << 21)
-#define MPC52xx_PSC_SICR_SYNCPOL                (1 << 20)
-#define MPC52xx_PSC_SICR_CELLSLAVE              (1 << 19)
-#define MPC52xx_PSC_SICR_CELL2XCLK              (1 << 18)
-#define MPC52xx_PSC_SICR_ESAI                   (1 << 17)
-#define MPC52xx_PSC_SICR_ENAC97                 (1 << 16)
-#define MPC52xx_PSC_SICR_SPI                    (1 << 15)
-#define MPC52xx_PSC_SICR_MSTR                   (1 << 14)
-#define MPC52xx_PSC_SICR_CPOL                   (1 << 13)
-#define MPC52xx_PSC_SICR_CPHA                   (1 << 12)
-#define MPC52xx_PSC_SICR_USEEOF                 (1 << 11)
-#define MPC52xx_PSC_SICR_DISABLEEOF             (1 << 10)
-
-/* Structure of the hardware registers */
-struct mpc52xx_psc {
-        u8              mode;           /* PSC + 0x00 */
-        u8              reserved0[3];
-        union {                         /* PSC + 0x04 */
-                u16     status;
-                u16     clock_select;
-        } sr_csr;
-#define mpc52xx_psc_status      sr_csr.status
-#define mpc52xx_psc_clock_select sr_csr.clock_select
-        u16             reserved1;
-        u8              command;        /* PSC + 0x08 */
-        u8              reserved2[3];
-        union {                         /* PSC + 0x0c */
-                u8      buffer_8;
-                u16     buffer_16;
-                u32     buffer_32;
-        } buffer;
-#define mpc52xx_psc_buffer_8    buffer.buffer_8
-#define mpc52xx_psc_buffer_16   buffer.buffer_16
-#define mpc52xx_psc_buffer_32   buffer.buffer_32
-        union {                         /* PSC + 0x10 */
-                u8      ipcr;
-                u8      acr;
-        } ipcr_acr;
-#define mpc52xx_psc_ipcr        ipcr_acr.ipcr
-#define mpc52xx_psc_acr         ipcr_acr.acr
-        u8              reserved3[3];
-        union {                         /* PSC + 0x14 */
-                u16     isr;
-                u16     imr;
-        } isr_imr;
-#define mpc52xx_psc_isr         isr_imr.isr
-#define mpc52xx_psc_imr         isr_imr.imr
-        u16             reserved4;
-        u8              ctur;           /* PSC + 0x18 */
-        u8              reserved5[3];
-        u8              ctlr;           /* PSC + 0x1c */
-        u8              reserved6[3];
-        /* BitClkDiv field of CCR is byte swapped in
-         * the hardware for mpc5200/b compatibility */
-        u32             ccr;            /* PSC + 0x20 */
-        u32             ac97_slots;     /* PSC + 0x24 */
-        u32             ac97_cmd;       /* PSC + 0x28 */
-        u32             ac97_data;      /* PSC + 0x2c */
-        u8              ivr;            /* PSC + 0x30 */
-        u8              reserved8[3];
-        u8              ip;             /* PSC + 0x34 */
-        u8              reserved9[3];
-        u8              op1;            /* PSC + 0x38 */
-        u8              reserved10[3];
-        u8              op0;            /* PSC + 0x3c */
-        u8              reserved11[3];
-        u32             sicr;           /* PSC + 0x40 */
-        u8              ircr1;          /* PSC + 0x44 */
-        u8              reserved13[3];
-        u8              ircr2;          /* PSC + 0x44 */
-        u8              reserved14[3];
-        u8              irsdr;          /* PSC + 0x4c */
-        u8              reserved15[3];
-        u8              irmdr;          /* PSC + 0x50 */
-        u8              reserved16[3];
-        u8              irfdr;          /* PSC + 0x54 */
-        u8              reserved17[3];
-};
-
-struct mpc52xx_psc_fifo {
-        u16             rfnum;          /* PSC + 0x58 */
-        u16             reserved18;
-        u16             tfnum;          /* PSC + 0x5c */
-        u16             reserved19;
-        u32             rfdata;         /* PSC + 0x60 */
-        u16             rfstat;         /* PSC + 0x64 */
-        u16             reserved20;
-        u8              rfcntl;         /* PSC + 0x68 */
-        u8              reserved21[5];
-        u16             rfalarm;        /* PSC + 0x6e */
-        u16             reserved22;
-        u16             rfrptr;         /* PSC + 0x72 */
-        u16             reserved23;
-        u16             rfwptr;         /* PSC + 0x76 */
-        u16             reserved24;
-        u16             rflrfptr;       /* PSC + 0x7a */
-        u16             reserved25;
-        u16             rflwfptr;       /* PSC + 0x7e */
-        u32             tfdata;         /* PSC + 0x80 */
-        u16             tfstat;         /* PSC + 0x84 */
-        u16             reserved26;
-        u8              tfcntl;         /* PSC + 0x88 */
-        u8              reserved27[5];
-        u16             tfalarm;        /* PSC + 0x8e */
-        u16             reserved28;
-        u16             tfrptr;         /* PSC + 0x92 */
-        u16             reserved29;
-        u16             tfwptr;         /* PSC + 0x96 */
-        u16             reserved30;
-        u16             tflrfptr;       /* PSC + 0x9a */
-        u16             reserved31;
-        u16             tflwfptr;       /* PSC + 0x9e */
-};
-
-#define MPC512x_PSC_FIFO_RESET_SLICE    0x80
-#define MPC512x_PSC_FIFO_ENABLE_SLICE   0x01
-#define MPC512x_PSC_FIFO_ENABLE_DMA     0x04
-
-#define MPC512x_PSC_FIFO_EMPTY          0x1
-#define MPC512x_PSC_FIFO_FULL           0x2
-#define MPC512x_PSC_FIFO_ALARM          0x4
-#define MPC512x_PSC_FIFO_URERR          0x8
-#define MPC512x_PSC_FIFO_ORERR          0x01
-#define MPC512x_PSC_FIFO_MEMERROR       0x02
-
-struct mpc512x_psc_fifo {
-        u32             reserved1[10];
-        u32             txcmd;          /* PSC + 0x80 */
-        u32             txalarm;        /* PSC + 0x84 */
-        u32             txsr;           /* PSC + 0x88 */
-        u32             txisr;          /* PSC + 0x8c */
-        u32             tximr;          /* PSC + 0x90 */
-        u32             txcnt;          /* PSC + 0x94 */
-        u32             txptr;          /* PSC + 0x98 */
-        u32             txsz;           /* PSC + 0x9c */
-        u32             reserved2[7];
-        union {
-                u8      txdata_8;
-                u16     txdata_16;
-                u32     txdata_32;
-        } txdata;                       /* PSC + 0xbc */
-#define txdata_8 txdata.txdata_8
-#define txdata_16 txdata.txdata_16
-#define txdata_32 txdata.txdata_32
-        u32             rxcmd;          /* PSC + 0xc0 */
-        u32             rxalarm;        /* PSC + 0xc4 */
-        u32             rxsr;           /* PSC + 0xc8 */
-        u32             rxisr;          /* PSC + 0xcc */
-        u32             rximr;          /* PSC + 0xd0 */
-        u32             rxcnt;          /* PSC + 0xd4 */
-        u32             rxptr;          /* PSC + 0xd8 */
-        u32             rxsz;           /* PSC + 0xdc */
-        u32             reserved3[7];
-        union {
-                u8      rxdata_8;
-                u16     rxdata_16;
-                u32     rxdata_32;
-        } rxdata;                       /* PSC + 0xfc */
-#define rxdata_8 rxdata.rxdata_8
-#define rxdata_16 rxdata.rxdata_16
-#define rxdata_32 rxdata.rxdata_32
-};
-
-#endif  /* __ASM_MPC52xx_PSC_H__ */
diff --git a/include/asm-powerpc/mpc6xx.h b/include/asm-powerpc/mpc6xx.h
deleted file mode 100644
index effc2291beb2..000000000000
--- a/include/asm-powerpc/mpc6xx.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_POWERPC_MPC6xx_H
-#define __ASM_POWERPC_MPC6xx_H
-
-void mpc6xx_enter_standby(void);
-
-#endif
diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h
deleted file mode 100644
index 03317e1e6185..000000000000
--- a/include/asm-powerpc/mpc8260.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Since there are many different boards and no standard configuration,
- * we have a unique include file for each.  Rather than change every
- * file that has to include MPC8260 configuration, they all include
- * this one and the configuration switching is done here.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_MPC8260_H__
-#define __ASM_POWERPC_MPC8260_H__
-
-#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */
-
-#ifdef CONFIG_8260
-
-#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
-#include <platforms/82xx/pq2ads.h>
-#endif
-
-#ifdef CONFIG_PCI_8260
-#include <platforms/82xx/m82xx_pci.h>
-#endif
-
-#endif /* CONFIG_8260 */
-#endif /* !__ASM_POWERPC_MPC8260_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h
deleted file mode 100644
index 15f650f987e7..000000000000
--- a/include/asm-powerpc/mpc86xx.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * MPC86xx definitions
- *
- * Author: Jeff Brown
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_MPC86xx_H__
-#define __ASM_POWERPC_MPC86xx_H__
-
-#include <asm/mmu.h>
-
-#ifdef CONFIG_PPC_86xx
-
-#define CPU0_BOOT_RELEASE 0x01000000
-#define CPU1_BOOT_RELEASE 0x02000000
-#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
-#define MCM_PORT_CONFIG_OFFSET 0x1010
-
-/* Offset from CCSRBAR */
-#define MPC86xx_MCM_OFFSET      (0x00000)
-#define MPC86xx_MCM_SIZE        (0x02000)
-
-#endif /* CONFIG_PPC_86xx */
-#endif /* __ASM_POWERPC_MPC86xx_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h
deleted file mode 100644
index 98f3c4f17328..000000000000
--- a/include/asm-powerpc/mpc8xx.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* This is the single file included by all MPC8xx build options.
- * Since there are many different boards and no standard configuration,
- * we have a unique include file for each.  Rather than change every
- * file that has to include MPC8xx configuration, they all include
- * this one and the configuration switching is done here.
- */
-#ifndef __CONFIG_8xx_DEFS
-#define __CONFIG_8xx_DEFS
-
-extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
-
-#endif /* __CONFIG_8xx_DEFS */
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
deleted file mode 100644
index fe566a348a86..000000000000
--- a/include/asm-powerpc/mpic.h
+++ /dev/null
@@ -1,481 +0,0 @@
-#ifndef _ASM_POWERPC_MPIC_H
-#define _ASM_POWERPC_MPIC_H
-#ifdef __KERNEL__
-
-#include <linux/irq.h>
-#include <linux/sysdev.h>
-#include <asm/dcr.h>
-
-/*
- * Global registers
- */
-
-#define MPIC_GREG_BASE                  0x01000
-
-#define MPIC_GREG_FEATURE_0             0x00000
-#define         MPIC_GREG_FEATURE_LAST_SRC_MASK         0x07ff0000
-#define         MPIC_GREG_FEATURE_LAST_SRC_SHIFT        16
-#define         MPIC_GREG_FEATURE_LAST_CPU_MASK         0x00001f00
-#define         MPIC_GREG_FEATURE_LAST_CPU_SHIFT        8
-#define         MPIC_GREG_FEATURE_VERSION_MASK          0xff
-#define MPIC_GREG_FEATURE_1             0x00010
-#define MPIC_GREG_GLOBAL_CONF_0         0x00020
-#define         MPIC_GREG_GCONF_RESET                   0x80000000
-#define         MPIC_GREG_GCONF_8259_PTHROU_DIS         0x20000000
-#define         MPIC_GREG_GCONF_NO_BIAS                 0x10000000
-#define         MPIC_GREG_GCONF_BASE_MASK               0x000fffff
-#define         MPIC_GREG_GCONF_MCK                     0x08000000
-#define MPIC_GREG_GLOBAL_CONF_1         0x00030
-#define         MPIC_GREG_GLOBAL_CONF_1_SIE             0x08000000
-#define         MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK  0x70000000
-#define         MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r)    \
-                        (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK)
-#define MPIC_GREG_VENDOR_0              0x00040
-#define MPIC_GREG_VENDOR_1              0x00050
-#define MPIC_GREG_VENDOR_2              0x00060
-#define MPIC_GREG_VENDOR_3              0x00070
-#define MPIC_GREG_VENDOR_ID             0x00080
-#define         MPIC_GREG_VENDOR_ID_STEPPING_MASK       0x00ff0000
-#define         MPIC_GREG_VENDOR_ID_STEPPING_SHIFT      16
-#define         MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK      0x0000ff00
-#define         MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT     8
-#define         MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK      0x000000ff
-#define MPIC_GREG_PROCESSOR_INIT        0x00090
-#define MPIC_GREG_IPI_VECTOR_PRI_0      0x000a0
-#define MPIC_GREG_IPI_VECTOR_PRI_1      0x000b0
-#define MPIC_GREG_IPI_VECTOR_PRI_2      0x000c0
-#define MPIC_GREG_IPI_VECTOR_PRI_3      0x000d0
-#define MPIC_GREG_IPI_STRIDE            0x10
-#define MPIC_GREG_SPURIOUS              0x000e0
-#define MPIC_GREG_TIMER_FREQ            0x000f0
-
-/*
- *
- * Timer registers
- */
-#define MPIC_TIMER_BASE                 0x01100
-#define MPIC_TIMER_STRIDE               0x40
-
-#define MPIC_TIMER_CURRENT_CNT          0x00000
-#define MPIC_TIMER_BASE_CNT             0x00010
-#define MPIC_TIMER_VECTOR_PRI           0x00020
-#define MPIC_TIMER_DESTINATION          0x00030
-
-/*
- * Per-Processor registers
- */
-
-#define MPIC_CPU_THISBASE               0x00000
-#define MPIC_CPU_BASE                   0x20000
-#define MPIC_CPU_STRIDE                 0x01000
-
-#define MPIC_CPU_IPI_DISPATCH_0         0x00040
-#define MPIC_CPU_IPI_DISPATCH_1         0x00050
-#define MPIC_CPU_IPI_DISPATCH_2         0x00060
-#define MPIC_CPU_IPI_DISPATCH_3         0x00070
-#define MPIC_CPU_IPI_DISPATCH_STRIDE    0x00010
-#define MPIC_CPU_CURRENT_TASK_PRI       0x00080
-#define         MPIC_CPU_TASKPRI_MASK                   0x0000000f
-#define MPIC_CPU_WHOAMI                 0x00090
-#define         MPIC_CPU_WHOAMI_MASK                    0x0000001f
-#define MPIC_CPU_INTACK                 0x000a0
-#define MPIC_CPU_EOI                    0x000b0
-#define MPIC_CPU_MCACK                  0x000c0
-
-/*
- * Per-source registers
- */
-
-#define MPIC_IRQ_BASE                   0x10000
-#define MPIC_IRQ_STRIDE                 0x00020
-#define MPIC_IRQ_VECTOR_PRI             0x00000
-#define         MPIC_VECPRI_MASK                        0x80000000
-#define         MPIC_VECPRI_ACTIVITY                    0x40000000      /* Read Only */
-#define         MPIC_VECPRI_PRIORITY_MASK               0x000f0000
-#define         MPIC_VECPRI_PRIORITY_SHIFT              16
-#define         MPIC_VECPRI_VECTOR_MASK                 0x000007ff
-#define         MPIC_VECPRI_POLARITY_POSITIVE           0x00800000
-#define         MPIC_VECPRI_POLARITY_NEGATIVE           0x00000000
-#define         MPIC_VECPRI_POLARITY_MASK               0x00800000
-#define         MPIC_VECPRI_SENSE_LEVEL                 0x00400000
-#define         MPIC_VECPRI_SENSE_EDGE                  0x00000000
-#define         MPIC_VECPRI_SENSE_MASK                  0x00400000
-#define MPIC_IRQ_DESTINATION            0x00010
-
-#define MPIC_MAX_IRQ_SOURCES    2048
-#define MPIC_MAX_CPUS           32
-#define MPIC_MAX_ISU            32
-
-/*
- * Tsi108 implementation of MPIC has many differences from the original one
- */
-
-/*
- * Global registers
- */
-
-#define TSI108_GREG_BASE                0x00000
-#define TSI108_GREG_FEATURE_0           0x00000
-#define TSI108_GREG_GLOBAL_CONF_0       0x00004
-#define TSI108_GREG_VENDOR_ID           0x0000c
-#define TSI108_GREG_IPI_VECTOR_PRI_0    0x00204         /* Doorbell 0 */
-#define TSI108_GREG_IPI_STRIDE          0x0c
-#define TSI108_GREG_SPURIOUS            0x00010
-#define TSI108_GREG_TIMER_FREQ          0x00014
-
-/*
- * Timer registers
- */
-#define TSI108_TIMER_BASE               0x0030
-#define TSI108_TIMER_STRIDE             0x10
-#define TSI108_TIMER_CURRENT_CNT        0x00000
-#define TSI108_TIMER_BASE_CNT           0x00004
-#define TSI108_TIMER_VECTOR_PRI         0x00008
-#define TSI108_TIMER_DESTINATION        0x0000c
-
-/*
- * Per-Processor registers
- */
-#define TSI108_CPU_BASE                 0x00300
-#define TSI108_CPU_STRIDE               0x00040
-#define TSI108_CPU_IPI_DISPATCH_0       0x00200
-#define TSI108_CPU_IPI_DISPATCH_STRIDE  0x00000
-#define TSI108_CPU_CURRENT_TASK_PRI     0x00000
-#define TSI108_CPU_WHOAMI               0xffffffff
-#define TSI108_CPU_INTACK               0x00004
-#define TSI108_CPU_EOI                  0x00008
-#define TSI108_CPU_MCACK                0x00004 /* Doesn't really exist here */
-
-/*
- * Per-source registers
- */
-#define TSI108_IRQ_BASE                 0x00100
-#define TSI108_IRQ_STRIDE               0x00008
-#define TSI108_IRQ_VECTOR_PRI           0x00000
-#define TSI108_VECPRI_VECTOR_MASK       0x000000ff
-#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000
-#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000
-#define TSI108_VECPRI_SENSE_LEVEL       0x02000000
-#define TSI108_VECPRI_SENSE_EDGE        0x00000000
-#define TSI108_VECPRI_POLARITY_MASK     0x01000000
-#define TSI108_VECPRI_SENSE_MASK        0x02000000
-#define TSI108_IRQ_DESTINATION          0x00004
-
-/* weird mpic register indices and mask bits in the HW info array */
-enum {
-        MPIC_IDX_GREG_BASE = 0,
-        MPIC_IDX_GREG_FEATURE_0,
-        MPIC_IDX_GREG_GLOBAL_CONF_0,
-        MPIC_IDX_GREG_VENDOR_ID,
-        MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
-        MPIC_IDX_GREG_IPI_STRIDE,
-        MPIC_IDX_GREG_SPURIOUS,
-        MPIC_IDX_GREG_TIMER_FREQ,
-
-        MPIC_IDX_TIMER_BASE,
-        MPIC_IDX_TIMER_STRIDE,
-        MPIC_IDX_TIMER_CURRENT_CNT,
-        MPIC_IDX_TIMER_BASE_CNT,
-        MPIC_IDX_TIMER_VECTOR_PRI,
-        MPIC_IDX_TIMER_DESTINATION,
-
-        MPIC_IDX_CPU_BASE,
-        MPIC_IDX_CPU_STRIDE,
-        MPIC_IDX_CPU_IPI_DISPATCH_0,
-        MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
-        MPIC_IDX_CPU_CURRENT_TASK_PRI,
-        MPIC_IDX_CPU_WHOAMI,
-        MPIC_IDX_CPU_INTACK,
-        MPIC_IDX_CPU_EOI,
-        MPIC_IDX_CPU_MCACK,
-
-        MPIC_IDX_IRQ_BASE,
-        MPIC_IDX_IRQ_STRIDE,
-        MPIC_IDX_IRQ_VECTOR_PRI,
-
-        MPIC_IDX_VECPRI_VECTOR_MASK,
-        MPIC_IDX_VECPRI_POLARITY_POSITIVE,
-        MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
-        MPIC_IDX_VECPRI_SENSE_LEVEL,
-        MPIC_IDX_VECPRI_SENSE_EDGE,
-        MPIC_IDX_VECPRI_POLARITY_MASK,
-        MPIC_IDX_VECPRI_SENSE_MASK,
-        MPIC_IDX_IRQ_DESTINATION,
-        MPIC_IDX_END
-};
-
-
-#ifdef CONFIG_MPIC_U3_HT_IRQS
-/* Fixup table entry */
-struct mpic_irq_fixup
-{
-        u8 __iomem      *base;
-        u8 __iomem      *applebase;
-        u32             data;
-        unsigned int    index;
-};
-#endif /* CONFIG_MPIC_U3_HT_IRQS */
-
-
-enum mpic_reg_type {
-        mpic_access_mmio_le,
-        mpic_access_mmio_be,
-#ifdef CONFIG_PPC_DCR
-        mpic_access_dcr
-#endif
-};
-
-struct mpic_reg_bank {
-        u32 __iomem     *base;
-#ifdef CONFIG_PPC_DCR
-        dcr_host_t      dhost;
-#endif /* CONFIG_PPC_DCR */
-};
-
-struct mpic_irq_save {
-        u32             vecprio,
-                        dest;
-#ifdef CONFIG_MPIC_U3_HT_IRQS
-        u32             fixup_data;
-#endif
-};
-
-/* The instance data of a given MPIC */
-struct mpic
-{
-        /* The remapper for this MPIC */
-        struct irq_host         *irqhost;
-
-        /* The "linux" controller struct */
-        struct irq_chip         hc_irq;
-#ifdef CONFIG_MPIC_U3_HT_IRQS
-        struct irq_chip         hc_ht_irq;
-#endif
-#ifdef CONFIG_SMP
-        struct irq_chip         hc_ipi;
-#endif
-        const char              *name;
-        /* Flags */
-        unsigned int            flags;
-        /* How many irq sources in a given ISU */
-        unsigned int            isu_size;
-        unsigned int            isu_shift;
-        unsigned int            isu_mask;
-        unsigned int            irq_count;
-        /* Number of sources */
-        unsigned int            num_sources;
-        /* Number of CPUs */
-        unsigned int            num_cpus;
-        /* default senses array */
-        unsigned char           *senses;
-        unsigned int            senses_count;
-
-        /* vector numbers used for internal sources (ipi/timers) */
-        unsigned int            ipi_vecs[4];
-        unsigned int            timer_vecs[4];
-
-        /* Spurious vector to program into unused sources */
-        unsigned int            spurious_vec;
-
-#ifdef CONFIG_MPIC_U3_HT_IRQS
-        /* The fixup table */
-        struct mpic_irq_fixup   *fixups;
-        spinlock_t              fixup_lock;
-#endif
-
-        /* Register access method */
-        enum mpic_reg_type      reg_type;
-
-        /* The various ioremap'ed bases */
-        struct mpic_reg_bank    gregs;
-        struct mpic_reg_bank    tmregs;
-        struct mpic_reg_bank    cpuregs[MPIC_MAX_CPUS];
-        struct mpic_reg_bank    isus[MPIC_MAX_ISU];
-
-        /* Protected sources */
-        unsigned long           *protected;
-
-#ifdef CONFIG_MPIC_WEIRD
-        /* Pointer to HW info array */
-        u32                     *hw_set;
-#endif
-
-#ifdef CONFIG_PCI_MSI
-        spinlock_t              bitmap_lock;
-        unsigned long           *hwirq_bitmap;
-#endif
-
-#ifdef CONFIG_MPIC_BROKEN_REGREAD
-        u32                     isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];
-#endif
-
-        /* link */
-        struct mpic             *next;
-
-        struct sys_device       sysdev;
-
-#ifdef CONFIG_PM
-        struct mpic_irq_save    *save_data;
-#endif
-};
-
-/*
- * MPIC flags (passed to mpic_alloc)
- *
- * The top 4 bits contain an MPIC bhw id that is used to index the
- * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
- * Note setting any ID (leaving those bits to 0) means standard MPIC
- */
-
-/* This is the primary controller, only that one has IPIs and
- * has afinity control. A non-primary MPIC always uses CPU0
- * registers only
- */
-#define MPIC_PRIMARY                    0x00000001
-
-/* Set this for a big-endian MPIC */
-#define MPIC_BIG_ENDIAN                 0x00000002
-/* Broken U3 MPIC */
-#define MPIC_U3_HT_IRQS                 0x00000004
-/* Broken IPI registers (autodetected) */
-#define MPIC_BROKEN_IPI                 0x00000008
-/* MPIC wants a reset */
-#define MPIC_WANTS_RESET                0x00000010
-/* Spurious vector requires EOI */
-#define MPIC_SPV_EOI                    0x00000020
-/* No passthrough disable */
-#define MPIC_NO_PTHROU_DIS              0x00000040
-/* DCR based MPIC */
-#define MPIC_USES_DCR                   0x00000080
-/* MPIC has 11-bit vector fields (or larger) */
-#define MPIC_LARGE_VECTORS              0x00000100
-/* Enable delivery of prio 15 interrupts as MCK instead of EE */
-#define MPIC_ENABLE_MCK                 0x00000200
-/* Disable bias among target selection, spread interrupts evenly */
-#define MPIC_NO_BIAS                    0x00000400
-/* Ignore NIRQS as reported by FRR */
-#define MPIC_BROKEN_FRR_NIRQS           0x00000800
-
-/* MPIC HW modification ID */
-#define MPIC_REGSET_MASK                0xf0000000
-#define MPIC_REGSET(val)                (((val) & 0xf ) << 28)
-#define MPIC_GET_REGSET(flags)          (((flags) >> 28) & 0xf)
-
-#define MPIC_REGSET_STANDARD            MPIC_REGSET(0)  /* Original MPIC */
-#define MPIC_REGSET_TSI108              MPIC_REGSET(1)  /* Tsi108/109 PIC */
-
-/* Allocate the controller structure and setup the linux irq descs
- * for the range if interrupts passed in. No HW initialization is
- * actually performed.
- * 
- * @phys_addr:  physial base address of the MPIC
- * @flags:      flags, see constants above
- * @isu_size:   number of interrupts in an ISU. Use 0 to use a
- *              standard ISU-less setup (aka powermac)
- * @irq_offset: first irq number to assign to this mpic
- * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
- *              to match the number of sources
- * @ipi_offset: first irq number to assign to this mpic IPI sources,
- *              used only on primary mpic
- * @senses:     array of sense values
- * @senses_num: number of entries in the array
- *
- * Note about the sense array. If none is passed, all interrupts are
- * setup to be level negative unless MPIC_U3_HT_IRQS is set in which
- * case they are edge positive (and the array is ignored anyway).
- * The values in the array start at the first source of the MPIC,
- * that is senses[0] correspond to linux irq "irq_offset".
- */
-extern struct mpic *mpic_alloc(struct device_node *node,
-                               phys_addr_t phys_addr,
-                               unsigned int flags,
-                               unsigned int isu_size,
-                               unsigned int irq_count,
-                               const char *name);
-
-/* Assign ISUs, to call before mpic_init()
- *
- * @mpic:       controller structure as returned by mpic_alloc()
- * @isu_num:    ISU number
- * @phys_addr:  physical address of the ISU
- */
-extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
-                            phys_addr_t phys_addr);
-
-/* Set default sense codes
- *
- * @mpic:       controller
- * @senses:     array of sense codes
- * @count:      size of above array
- *
- * Optionally provide an array (indexed on hardware interrupt numbers
- * for this MPIC) of default sense codes for the chip. Those are linux
- * sense codes IRQ_TYPE_*
- *
- * The driver gets ownership of the pointer, don't dispose of it or
- * anything like that. __init only.
- */
-extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
-
-
-/* Initialize the controller. After this has been called, none of the above
- * should be called again for this mpic
- */
-extern void mpic_init(struct mpic *mpic);
-
-/*
- * All of the following functions must only be used after the
- * ISUs have been assigned and the controller fully initialized
- * with mpic_init()
- */
-
-
-/* Change the priority of an interrupt. Default is 8 for irqs and
- * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
- * IPI number is then the offset'ed (linux irq number mapped to the IPI)
- */
-extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
-
-/* Setup a non-boot CPU */
-extern void mpic_setup_this_cpu(void);
-
-/* Clean up for kexec (or cpu offline or ...) */
-extern void mpic_teardown_this_cpu(int secondary);
-
-/* Get the current cpu priority for this cpu (0..15) */
-extern int mpic_cpu_get_priority(void);
-
-/* Set the current cpu priority for this cpu */
-extern void mpic_cpu_set_priority(int prio);
-
-/* Request IPIs on primary mpic */
-extern void mpic_request_ipis(void);
-
-/* Send an IPI (non offseted number 0..3) */
-extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
-
-/* Send a message (IPI) to a given target (cpu number or MSG_*) */
-void smp_mpic_message_pass(int target, int msg);
-
-/* Unmask a specific virq */
-extern void mpic_unmask_irq(unsigned int irq);
-/* Mask a specific virq */
-extern void mpic_mask_irq(unsigned int irq);
-/* EOI a specific virq */
-extern void mpic_end_irq(unsigned int irq);
-
-/* Fetch interrupt from a given mpic */
-extern unsigned int mpic_get_one_irq(struct mpic *mpic);
-/* This one gets from the primary mpic */
-extern unsigned int mpic_get_irq(void);
-/* Fetch Machine Check interrupt from primary mpic */
-extern unsigned int mpic_get_mcirq(void);
-
-/* Set the EPIC clock ratio */
-void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
-
-/* Enable/Disable EPIC serial interrupt mode */
-void mpic_set_serial_int(struct mpic *mpic, int enable);
-
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_MPIC_H */
diff --git a/include/asm-powerpc/msgbuf.h b/include/asm-powerpc/msgbuf.h
deleted file mode 100644
index dd76743c7537..000000000000
--- a/include/asm-powerpc/msgbuf.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _ASM_POWERPC_MSGBUF_H
-#define _ASM_POWERPC_MSGBUF_H
-
-/*
- * The msqid64_ds structure for the PowerPC architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- */
-
-struct msqid64_ds {
-        struct ipc64_perm msg_perm;
-#ifndef __powerpc64__
-        unsigned int    __unused1;
-#endif
-        __kernel_time_t msg_stime;      /* last msgsnd time */
-#ifndef __powerpc64__
-        unsigned int    __unused2;
-#endif
-        __kernel_time_t msg_rtime;      /* last msgrcv time */
-#ifndef __powerpc64__
-        unsigned int    __unused3;
-#endif
-        __kernel_time_t msg_ctime;      /* last change time */
-        unsigned long  msg_cbytes;      /* current number of bytes on queue */
-        unsigned long  msg_qnum;        /* number of messages in queue */
-        unsigned long  msg_qbytes;      /* max number of bytes on queue */
-        __kernel_pid_t msg_lspid;       /* pid of last msgsnd */
-        __kernel_pid_t msg_lrpid;       /* last receive pid */
-        unsigned long  __unused4;
-        unsigned long  __unused5;
-};
-
-#endif  /* _ASM_POWERPC_MSGBUF_H */
diff --git a/include/asm-powerpc/mutex.h b/include/asm-powerpc/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-powerpc/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h
deleted file mode 100644
index efde5ac82f7b..000000000000
--- a/include/asm-powerpc/nvram.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * NVRAM definitions and access functions.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_NVRAM_H
-#define _ASM_POWERPC_NVRAM_H
-
-#include <linux/errno.h>
-
-#define NVRW_CNT 0x20
-#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */
-#define NVRAM_BLOCK_LEN 16
-#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN)
-#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN)
-
-#define NVRAM_AS0  0x74
-#define NVRAM_AS1  0x75
-#define NVRAM_DATA 0x77
-
-
-/* RTC Offsets */
-
-#define MOTO_RTC_SECONDS        0x1FF9
-#define MOTO_RTC_MINUTES        0x1FFA
-#define MOTO_RTC_HOURS          0x1FFB
-#define MOTO_RTC_DAY_OF_WEEK    0x1FFC
-#define MOTO_RTC_DAY_OF_MONTH   0x1FFD
-#define MOTO_RTC_MONTH          0x1FFE
-#define MOTO_RTC_YEAR           0x1FFF
-#define MOTO_RTC_CONTROLA       0x1FF8
-#define MOTO_RTC_CONTROLB       0x1FF9
-
-#define NVRAM_SIG_SP    0x02    /* support processor */
-#define NVRAM_SIG_OF    0x50    /* open firmware config */
-#define NVRAM_SIG_FW    0x51    /* general firmware */
-#define NVRAM_SIG_HW    0x52    /* hardware (VPD) */
-#define NVRAM_SIG_FLIP  0x5a    /* Apple flip/flop header */
-#define NVRAM_SIG_APPL  0x5f    /* Apple "system" (???) */
-#define NVRAM_SIG_SYS   0x70    /* system env vars */
-#define NVRAM_SIG_CFG   0x71    /* config data */
-#define NVRAM_SIG_ELOG  0x72    /* error log */
-#define NVRAM_SIG_VEND  0x7e    /* vendor defined */
-#define NVRAM_SIG_FREE  0x7f    /* Free space */
-#define NVRAM_SIG_OS    0xa0    /* OS defined */
-#define NVRAM_SIG_PANIC 0xa1    /* Apple OSX "panic" */
-
-/* If change this size, then change the size of NVNAME_LEN */
-struct nvram_header {
-        unsigned char signature;
-        unsigned char checksum;
-        unsigned short length;
-        char name[12];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-
-struct nvram_partition {
-        struct list_head partition;
-        struct nvram_header header;
-        unsigned int index;
-};
-
-
-extern int nvram_write_error_log(char * buff, int length,
-                                         unsigned int err_type, unsigned int err_seq);
-extern int nvram_read_error_log(char * buff, int length,
-                                         unsigned int * err_type, unsigned int *err_seq);
-extern int nvram_clear_error_log(void);
-extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
-
-extern int pSeries_nvram_init(void);
-
-#ifdef CONFIG_MMIO_NVRAM
-extern int mmio_nvram_init(void);
-#else
-static inline int mmio_nvram_init(void)
-{
-        return -ENODEV;
-}
-#endif
-
-#endif /* __KERNEL__ */
-
-/* PowerMac specific nvram stuffs */
-
-enum {
-        pmac_nvram_OF,          /* Open Firmware partition */
-        pmac_nvram_XPRAM,       /* MacOS XPRAM partition */
-        pmac_nvram_NR           /* MacOS Name Registry partition */
-};
-
-#ifdef __KERNEL__
-/* Return partition offset in nvram */
-extern int      pmac_get_partition(int partition);
-
-/* Direct access to XPRAM on PowerMacs */
-extern u8       pmac_xpram_read(int xpaddr);
-extern void     pmac_xpram_write(int xpaddr, u8 data);
-
-/* Synchronize NVRAM */
-extern void     nvram_sync(void);
-
-/* Normal access to NVRAM */
-extern unsigned char nvram_read_byte(int i);
-extern void nvram_write_byte(unsigned char c, int i);
-#endif
-
-/* Some offsets in XPRAM */
-#define PMAC_XPRAM_MACHINE_LOC  0xe4
-#define PMAC_XPRAM_SOUND_VOLUME 0x08
-
-/* Machine location structure in PowerMac XPRAM */
-struct pmac_machine_location {
-        unsigned int    latitude;       /* 2+30 bit Fractional number */
-        unsigned int    longitude;      /* 2+30 bit Fractional number */
-        unsigned int    delta;          /* mix of GMT delta and DLS */
-};
-
-/*
- * /dev/nvram ioctls
- *
- * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
- * definitely obsolete. Do not use it if you can avoid it
- */
-
-#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
-                                _IOWR('p', 0x40, int)
-
-#define IOC_NVRAM_GET_OFFSET    _IOWR('p', 0x42, int)   /* Get NVRAM partition offset */
-#define IOC_NVRAM_SYNC          _IO('p', 0x43)          /* Sync NVRAM image */
-
-#endif /* _ASM_POWERPC_NVRAM_H */
diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h
deleted file mode 100644
index 3c123990ca2e..000000000000
--- a/include/asm-powerpc/of_device.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ASM_POWERPC_OF_DEVICE_H
-#define _ASM_POWERPC_OF_DEVICE_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/of.h>
-
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device
-{
-        struct device_node      *node;          /* to be obsoleted */
-        u64                     dma_mask;       /* DMA mask */
-        struct device           dev;            /* Generic device interface */
-};
-
-extern struct of_device *of_device_alloc(struct device_node *np,
-                                         const char *bus_id,
-                                         struct device *parent);
-
-extern int of_device_uevent(struct device *dev,
-                            struct kobj_uevent_env *env);
-
-/* This is just here during the transition */
-#include <linux/of_device.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/include/asm-powerpc/of_platform.h b/include/asm-powerpc/of_platform.h
deleted file mode 100644
index 18659ef72139..000000000000
--- a/include/asm-powerpc/of_platform.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASM_POWERPC_OF_PLATFORM_H
-#define _ASM_POWERPC_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *                       <benh@kernel.crashing.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
-        return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
-        of_unregister_driver(drv);
-}
-
-/* Platform devices and busses creation */
-extern struct of_device *of_platform_device_create(struct device_node *np,
-                                                   const char *bus_id,
-                                                   struct device *parent);
-/* pseudo "matches" value to not do deep probe */
-#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
-
-extern int of_platform_bus_probe(struct device_node *root,
-                                 const struct of_device_id *matches,
-                                 struct device *parent);
-
-extern struct of_device *of_find_device_by_phandle(phandle ph);
-
-extern void of_instantiate_rtc(void);
-
-#endif  /* _ASM_POWERPC_OF_PLATFORM_H */
diff --git a/include/asm-powerpc/ohare.h b/include/asm-powerpc/ohare.h
deleted file mode 100644
index 0d030f9dea24..000000000000
--- a/include/asm-powerpc/ohare.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _ASM_POWERPC_OHARE_H
-#define _ASM_POWERPC_OHARE_H
-#ifdef __KERNEL__
-/*
- * ohare.h: definitions for using the "O'Hare" I/O controller chip.
- *
- * Copyright (C) 1997 Paul Mackerras.
- *
- * BenH: Changed to match those of heathrow (but not all of them). Please
- *       check if I didn't break anything (especially the media bay).
- */
-
-/* offset from ohare base for feature control register */
-#define OHARE_MBCR      0x34
-#define OHARE_FCR       0x38
-
-/*
- * Bits in feature control register.
- * These were mostly derived by experiment on a powerbook 3400
- * and may differ for other machines.
- */
-#define OH_SCC_RESET            1
-#define OH_BAY_POWER_N          2       /* a guess */
-#define OH_BAY_PCI_ENABLE       4       /* a guess */
-#define OH_BAY_IDE_ENABLE       8
-#define OH_BAY_FLOPPY_ENABLE    0x10
-#define OH_IDE0_ENABLE          0x20
-#define OH_IDE0_RESET_N         0x40    /* a guess */
-#define OH_BAY_DEV_MASK         0x1c
-#define OH_BAY_RESET_N          0x80
-#define OH_IOBUS_ENABLE         0x100   /* IOBUS seems to be IDE */
-#define OH_SCC_ENABLE           0x200
-#define OH_MESH_ENABLE          0x400
-#define OH_FLOPPY_ENABLE        0x800
-#define OH_SCCA_IO              0x4000
-#define OH_SCCB_IO              0x8000
-#define OH_VIA_ENABLE           0x10000 /* Is apparently wrong, to be verified */
-#define OH_IDE1_RESET_N         0x800000
-
-/*
- * Bits to set in the feature control register on PowerBooks.
- */
-#define PBOOK_FEATURES          (OH_IDE_ENABLE | OH_SCC_ENABLE | \
-                                 OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
-
-/*
- * A magic value to put into the feature control register of the
- * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
- * Contributed by Harry Eaton.
- */
-#define STARMAX_FEATURES        0xbeff7a
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OHARE_H */
diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h
deleted file mode 100644
index 95035c602ba6..000000000000
--- a/include/asm-powerpc/oprofile_impl.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Based on alpha version.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
-#define _ASM_POWERPC_OPROFILE_IMPL_H
-#ifdef __KERNEL__
-
-#define OP_MAX_COUNTER 8
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-        unsigned long enabled;
-        unsigned long event;
-        unsigned long count;
-        /* Classic doesn't support per-counter user/kernel selection */
-        unsigned long kernel;
-        unsigned long user;
-        unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-#ifdef CONFIG_PPC64
-        unsigned long mmcr0;
-        unsigned long mmcr1;
-        unsigned long mmcra;
-#endif
-        unsigned long enable_kernel;
-        unsigned long enable_user;
-};
-
-/* Per-arch configuration */
-struct op_powerpc_model {
-        int (*reg_setup) (struct op_counter_config *,
-                           struct op_system_config *,
-                           int num_counters);
-        int  (*cpu_setup) (struct op_counter_config *);
-        int  (*start) (struct op_counter_config *);
-        int  (*global_start) (struct op_counter_config *);
-        void (*stop) (void);
-        void (*global_stop) (void);
-        int (*sync_start)(void);
-        int (*sync_stop)(void);
-        void (*handle_interrupt) (struct pt_regs *,
-                                  struct op_counter_config *);
-        int num_counters;
-};
-
-extern struct op_powerpc_model op_model_fsl_emb;
-extern struct op_powerpc_model op_model_rs64;
-extern struct op_powerpc_model op_model_power4;
-extern struct op_powerpc_model op_model_7450;
-extern struct op_powerpc_model op_model_cell;
-extern struct op_powerpc_model op_model_pa6t;
-
-
-/* All the classic PPC parts use these */
-static inline unsigned int classic_ctr_read(unsigned int i)
-{
-        switch(i) {
-        case 0:
-                return mfspr(SPRN_PMC1);
-        case 1:
-                return mfspr(SPRN_PMC2);
-        case 2:
-                return mfspr(SPRN_PMC3);
-        case 3:
-                return mfspr(SPRN_PMC4);
-        case 4:
-                return mfspr(SPRN_PMC5);
-        case 5:
-                return mfspr(SPRN_PMC6);
-
-/* No PPC32 chip has more than 6 so far */
-#ifdef CONFIG_PPC64
-        case 6:
-                return mfspr(SPRN_PMC7);
-        case 7:
-                return mfspr(SPRN_PMC8);
-#endif
-        default:
-                return 0;
-        }
-}
-
-static inline void classic_ctr_write(unsigned int i, unsigned int val)
-{
-        switch(i) {
-        case 0:
-                mtspr(SPRN_PMC1, val);
-                break;
-        case 1:
-                mtspr(SPRN_PMC2, val);
-                break;
-        case 2:
-                mtspr(SPRN_PMC3, val);
-                break;
-        case 3:
-                mtspr(SPRN_PMC4, val);
-                break;
-        case 4:
-                mtspr(SPRN_PMC5, val);
-                break;
-        case 5:
-                mtspr(SPRN_PMC6, val);
-                break;
-
-/* No PPC32 chip has more than 6, yet */
-#ifdef CONFIG_PPC64
-        case 6:
-                mtspr(SPRN_PMC7, val);
-                break;
-        case 7:
-                mtspr(SPRN_PMC8, val);
-                break;
-#endif
-        default:
-                break;
-        }
-}
-
-
-extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/include/asm-powerpc/pSeries_reconfig.h b/include/asm-powerpc/pSeries_reconfig.h
deleted file mode 100644
index e482e5352e69..000000000000
--- a/include/asm-powerpc/pSeries_reconfig.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _PPC64_PSERIES_RECONFIG_H
-#define _PPC64_PSERIES_RECONFIG_H
-#ifdef __KERNEL__
-
-#include <linux/notifier.h>
-
-/*
- * Use this API if your code needs to know about OF device nodes being
- * added or removed on pSeries systems.
- */
-
-#define PSERIES_RECONFIG_ADD            0x0001
-#define PSERIES_RECONFIG_REMOVE         0x0002
-#define PSERIES_DRCONF_MEM_ADD          0x0003
-#define PSERIES_DRCONF_MEM_REMOVE       0x0004
-
-#ifdef CONFIG_PPC_PSERIES
-extern int pSeries_reconfig_notifier_register(struct notifier_block *);
-extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
-#else /* !CONFIG_PPC_PSERIES */
-static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
-{
-        return 0;
-}
-static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
-#endif /* CONFIG_PPC_PSERIES */
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h
deleted file mode 100644
index 7b564444ff61..000000000000
--- a/include/asm-powerpc/paca.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * include/asm-powerpc/paca.h
- *
- * This control block defines the PACA which defines the processor
- * specific data for each logical processor on the system.
- * There are some pointers defined that are utilized by PLIC.
- *
- * C 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_PACA_H
-#define _ASM_POWERPC_PACA_H
-#ifdef __KERNEL__
-
-#include        <asm/types.h>
-#include        <asm/lppaca.h>
-#include        <asm/mmu.h>
-
-register struct paca_struct *local_paca asm("r13");
-
-#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP)
-extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
-/*
- * Add standard checks that preemption cannot occur when using get_paca():
- * otherwise the paca_struct it points to may be the wrong one just after.
- */
-#define get_paca()      ((void) debug_smp_processor_id(), local_paca)
-#else
-#define get_paca()      local_paca
-#endif
-
-#define get_lppaca()    (get_paca()->lppaca_ptr)
-#define get_slb_shadow()        (get_paca()->slb_shadow_ptr)
-
-struct task_struct;
-
-/*
- * Defines the layout of the paca.
- *
- * This structure is not directly accessed by firmware or the service
- * processor.
- */
-struct paca_struct {
-        /*
-         * Because hw_cpu_id, unlike other paca fields, is accessed
-         * routinely from other CPUs (from the IRQ code), we stick to
-         * read-only (after boot) fields in the first cacheline to
-         * avoid cacheline bouncing.
-         */
-
-        struct lppaca *lppaca_ptr;      /* Pointer to LpPaca for PLIC */
-
-        /*
-         * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c 
-         * load lock_token and paca_index with a single lwz
-         * instruction.  They must travel together and be properly
-         * aligned.
-         */
-        u16 lock_token;                 /* Constant 0x8000, used in locks */
-        u16 paca_index;                 /* Logical processor number */
-
-        u64 kernel_toc;                 /* Kernel TOC address */
-        u64 stab_real;                  /* Absolute address of segment table */
-        u64 stab_addr;                  /* Virtual address of segment table */
-        void *emergency_sp;             /* pointer to emergency stack */
-        u64 data_offset;                /* per cpu data offset */
-        s16 hw_cpu_id;                  /* Physical processor number */
-        u8 cpu_start;                   /* At startup, processor spins until */
-                                        /* this becomes non-zero. */
-        struct slb_shadow *slb_shadow_ptr;
-
-        /*
-         * Now, starting in cacheline 2, the exception save areas
-         */
-        /* used for most interrupts/exceptions */
-        u64 exgen[10] __attribute__((aligned(0x80)));
-        u64 exmc[10];           /* used for machine checks */
-        u64 exslb[10];          /* used for SLB/segment table misses
-                                 * on the linear mapping */
-
-        mm_context_t context;
-        u16 vmalloc_sllp;
-        u16 slb_cache_ptr;
-        u16 slb_cache[SLB_CACHE_ENTRIES];
-
-        /*
-         * then miscellaneous read-write fields
-         */
-        struct task_struct *__current;  /* Pointer to current */
-        u64 kstack;                     /* Saved Kernel stack addr */
-        u64 stab_rr;                    /* stab/slb round-robin counter */
-        u64 saved_r1;                   /* r1 save for RTAS calls */
-        u64 saved_msr;                  /* MSR saved here by enter_rtas */
-        u16 trap_save;                  /* Used when bad stack is encountered */
-        u8 soft_enabled;                /* irq soft-enable flag */
-        u8 hard_enabled;                /* set if irqs are enabled in MSR */
-        u8 io_sync;                     /* writel() needs spin_unlock sync */
-
-        /* Stuff for accurate time accounting */
-        u64 user_time;                  /* accumulated usermode TB ticks */
-        u64 system_time;                /* accumulated system TB ticks */
-        u64 startpurr;                  /* PURR/TB value snapshot */
-        u64 startspurr;                 /* SPURR value snapshot */
-};
-
-extern struct paca_struct paca[];
-extern void initialise_pacas(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PACA_H */
diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h
deleted file mode 100644
index e088545cb3f5..000000000000
--- a/include/asm-powerpc/page.h
+++ /dev/null
@@ -1,225 +0,0 @@
-#ifndef _ASM_POWERPC_PAGE_H
-#define _ASM_POWERPC_PAGE_H
-
-/*
- * Copyright (C) 2001,2005 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm-compat.h>
-#include <asm/kdump.h>
-#include <asm/types.h>
-
-/*
- * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
- * page size. When using 64K pages however, whether we are really supporting
- * 64K pages in HW or not is irrelevant to those definitions.
- */
-#ifdef CONFIG_PPC_64K_PAGES
-#define PAGE_SHIFT              16
-#else
-#define PAGE_SHIFT              12
-#endif
-
-#define PAGE_SIZE               (ASM_CONST(1) << PAGE_SHIFT)
-
-/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
-#define __HAVE_ARCH_GATE_AREA           1
-
-/*
- * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we
- * assign PAGE_MASK to a larger type it gets extended the way we want
- * (i.e. with 1s in the high bits)
- */
-#define PAGE_MASK      (~((1 << PAGE_SHIFT) - 1))
-
-/*
- * KERNELBASE is the virtual address of the start of the kernel, it's often
- * the same as PAGE_OFFSET, but _might not be_.
- *
- * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
- *
- * PAGE_OFFSET is the virtual address of the start of lowmem.
- *
- * PHYSICAL_START is the physical address of the start of the kernel.
- *
- * MEMORY_START is the physical address of the start of lowmem.
- *
- * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on
- * ppc32 and based on how they are set we determine MEMORY_START.
- *
- * For the linear mapping the following equation should be true:
- * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START
- *
- * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
- *
- * There are two was to determine a physical address from a virtual one:
- * va = pa + PAGE_OFFSET - MEMORY_START
- * va = pa + KERNELBASE - PHYSICAL_START
- *
- * If you want to know something's offset from the start of the kernel you
- * should subtract KERNELBASE.
- *
- * If you want to test if something's a kernel address, use is_kernel_addr().
- */
-
-#define KERNELBASE      ASM_CONST(CONFIG_KERNEL_START)
-#define PAGE_OFFSET     ASM_CONST(CONFIG_PAGE_OFFSET)
-#define LOAD_OFFSET     ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
-
-#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
-#ifndef __ASSEMBLY__
-extern phys_addr_t memstart_addr;
-extern phys_addr_t kernstart_addr;
-#endif
-#define PHYSICAL_START  kernstart_addr
-#define MEMORY_START    memstart_addr
-#else
-#define PHYSICAL_START  ASM_CONST(CONFIG_PHYSICAL_START)
-#define MEMORY_START    (PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
-#endif
-
-#ifdef CONFIG_FLATMEM
-#define ARCH_PFN_OFFSET         (MEMORY_START >> PAGE_SHIFT)
-#define pfn_valid(pfn)          ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
-#endif
-
-#define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_kaddr(pfn)       __va((pfn) << PAGE_SHIFT)
-#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
-#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
-
-/*
- * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
- * and needs to be executable.  This means the whole heap ends
- * up being executable.
- */
-#define VM_DATA_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \
-                                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#define VM_DATA_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \
-                                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#ifdef __powerpc64__
-#include <asm/page_64.h>
-#else
-#include <asm/page_32.h>
-#endif
-
-/* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr,size)    (((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr,size)  ((addr)&(~((size)-1)))
-
-/* align addr on a size boundary - adjust address up if needed */
-#define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
-
-/*
- * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
- * "kernelness", use is_kernel_addr() - it should do what you want.
- */
-#define is_kernel_addr(x)       ((x) >= PAGE_OFFSET)
-
-#ifndef __ASSEMBLY__
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/* These are used to make use of C type-checking. */
-
-/* PTE level */
-typedef struct { pte_basic_t pte; } pte_t;
-#define pte_val(x)      ((x).pte)
-#define __pte(x)        ((pte_t) { (x) })
-
-/* 64k pages additionally define a bigger "real PTE" type that gathers
- * the "second half" part of the PTE for pseudo 64k pages
- */
-#ifdef CONFIG_PPC_64K_PAGES
-typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
-#else
-typedef struct { pte_t pte; } real_pte_t;
-#endif
-
-/* PMD level */
-#ifdef CONFIG_PPC64
-typedef struct { unsigned long pmd; } pmd_t;
-#define pmd_val(x)      ((x).pmd)
-#define __pmd(x)        ((pmd_t) { (x) })
-
-/* PUD level exusts only on 4k pages */
-#ifndef CONFIG_PPC_64K_PAGES
-typedef struct { unsigned long pud; } pud_t;
-#define pud_val(x)      ((x).pud)
-#define __pud(x)        ((pud_t) { (x) })
-#endif /* !CONFIG_PPC_64K_PAGES */
-#endif /* CONFIG_PPC64 */
-
-/* PGD level */
-typedef struct { unsigned long pgd; } pgd_t;
-#define pgd_val(x)      ((x).pgd)
-#define __pgd(x)        ((pgd_t) { (x) })
-
-/* Page protection bits */
-typedef struct { unsigned long pgprot; } pgprot_t;
-#define pgprot_val(x)   ((x).pgprot)
-#define __pgprot(x)     ((pgprot_t) { (x) })
-
-#else
-
-/*
- * .. while these make it easier on the compiler
- */
-
-typedef pte_basic_t pte_t;
-#define pte_val(x)      (x)
-#define __pte(x)        (x)
-
-#ifdef CONFIG_PPC_64K_PAGES
-typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
-#else
-typedef unsigned long real_pte_t;
-#endif
-
-
-#ifdef CONFIG_PPC64
-typedef unsigned long pmd_t;
-#define pmd_val(x)      (x)
-#define __pmd(x)        (x)
-
-#ifndef CONFIG_PPC_64K_PAGES
-typedef unsigned long pud_t;
-#define pud_val(x)      (x)
-#define __pud(x)        (x)
-#endif /* !CONFIG_PPC_64K_PAGES */
-#endif /* CONFIG_PPC64 */
-
-typedef unsigned long pgd_t;
-#define pgd_val(x)      (x)
-#define pgprot_val(x)   (x)
-
-typedef unsigned long pgprot_t;
-#define __pgd(x)        (x)
-#define __pgprot(x)     (x)
-
-#endif
-
-struct page;
-extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
-extern void copy_user_page(void *to, void *from, unsigned long vaddr,
-                struct page *p);
-extern int page_is_ram(unsigned long pfn);
-
-struct vm_area_struct;
-
-typedef struct page *pgtable_t;
-
-#include <asm-generic/memory_model.h>
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PAGE_H */
diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h
deleted file mode 100644
index ebfae530a379..000000000000
--- a/include/asm-powerpc/page_32.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_POWERPC_PAGE_32_H
-#define _ASM_POWERPC_PAGE_32_H
-
-#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
-#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
-#endif
-#endif
-
-#define VM_DATA_DEFAULT_FLAGS   VM_DATA_DEFAULT_FLAGS32
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define ARCH_KMALLOC_MINALIGN   L1_CACHE_BYTES
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
- * physical addressing.  For now this just the IBM PPC440.
- */
-#ifdef CONFIG_PTE_64BIT
-typedef unsigned long long pte_basic_t;
-#define PTE_SHIFT       (PAGE_SHIFT - 3)        /* 512 ptes per page */
-#else
-typedef unsigned long pte_basic_t;
-#define PTE_SHIFT       (PAGE_SHIFT - 2)        /* 1024 ptes per page */
-#endif
-
-struct page;
-extern void clear_pages(void *page, int order);
-static inline void clear_page(void *page) { clear_pages(page, 0); }
-extern void copy_page(void *to, void *from);
-
-#include <asm-generic/page.h>
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PAGE_32_H */
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
deleted file mode 100644
index 043bfdfe4f73..000000000000
--- a/include/asm-powerpc/page_64.h
+++ /dev/null
@@ -1,185 +0,0 @@
-#ifndef _ASM_POWERPC_PAGE_64_H
-#define _ASM_POWERPC_PAGE_64_H
-
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux
- * specific, every notion of page number shared with the firmware, TCEs,
- * iommu, etc... still uses a page size of 4K.
- */
-#define HW_PAGE_SHIFT           12
-#define HW_PAGE_SIZE            (ASM_CONST(1) << HW_PAGE_SHIFT)
-#define HW_PAGE_MASK            (~(HW_PAGE_SIZE-1))
-
-/*
- * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and
- * HW_PAGE_SHIFT, that is 4K pages.
- */
-#define PAGE_FACTOR             (PAGE_SHIFT - HW_PAGE_SHIFT)
-
-/* Segment size; normal 256M segments */
-#define SID_SHIFT               28
-#define SID_MASK                ASM_CONST(0xfffffffff)
-#define ESID_MASK               0xfffffffff0000000UL
-#define GET_ESID(x)             (((x) >> SID_SHIFT) & SID_MASK)
-
-/* 1T segments */
-#define SID_SHIFT_1T            40
-#define SID_MASK_1T             0xffffffUL
-#define ESID_MASK_1T            0xffffff0000000000UL
-#define GET_ESID_1T(x)          (((x) >> SID_SHIFT_1T) & SID_MASK_1T)
-
-#ifndef __ASSEMBLY__
-#include <asm/cache.h>
-
-typedef unsigned long pte_basic_t;
-
-static __inline__ void clear_page(void *addr)
-{
-        unsigned long lines, line_size;
-
-        line_size = ppc64_caches.dline_size;
-        lines = ppc64_caches.dlines_per_page;
-
-        __asm__ __volatile__(
-        "mtctr  %1      # clear_page\n\
-1:      dcbz    0,%0\n\
-        add     %0,%0,%3\n\
-        bdnz+   1b"
-        : "=r" (addr)
-        : "r" (lines), "0" (addr), "r" (line_size)
-        : "ctr", "memory");
-}
-
-extern void copy_4K_page(void *to, void *from);
-
-#ifdef CONFIG_PPC_64K_PAGES
-static inline void copy_page(void *to, void *from)
-{
-        unsigned int i;
-        for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) {
-                copy_4K_page(to, from);
-                to += 4096;
-                from += 4096;
-        }
-}
-#else /* CONFIG_PPC_64K_PAGES */
-static inline void copy_page(void *to, void *from)
-{
-        copy_4K_page(to, from);
-}
-#endif /* CONFIG_PPC_64K_PAGES */
-
-/* Log 2 of page table size */
-extern u64 ppc64_pft_size;
-
-/* Large pages size */
-#ifdef CONFIG_HUGETLB_PAGE
-extern unsigned int HPAGE_SHIFT;
-#else
-#define HPAGE_SHIFT PAGE_SHIFT
-#endif
-#define HPAGE_SIZE              ((1UL) << HPAGE_SHIFT)
-#define HPAGE_MASK              (~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER      (HPAGE_SHIFT - PAGE_SHIFT)
-#define HUGE_MAX_HSTATE         3
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_PPC_MM_SLICES
-
-#define SLICE_LOW_SHIFT         28
-#define SLICE_HIGH_SHIFT        40
-
-#define SLICE_LOW_TOP           (0x100000000ul)
-#define SLICE_NUM_LOW           (SLICE_LOW_TOP >> SLICE_LOW_SHIFT)
-#define SLICE_NUM_HIGH          (PGTABLE_RANGE >> SLICE_HIGH_SHIFT)
-
-#define GET_LOW_SLICE_INDEX(addr)       ((addr) >> SLICE_LOW_SHIFT)
-#define GET_HIGH_SLICE_INDEX(addr)      ((addr) >> SLICE_HIGH_SHIFT)
-
-#ifndef __ASSEMBLY__
-
-struct slice_mask {
-        u16 low_slices;
-        u16 high_slices;
-};
-
-struct mm_struct;
-
-extern unsigned long slice_get_unmapped_area(unsigned long addr,
-                                             unsigned long len,
-                                             unsigned long flags,
-                                             unsigned int psize,
-                                             int topdown,
-                                             int use_cache);
-
-extern unsigned int get_slice_psize(struct mm_struct *mm,
-                                    unsigned long addr);
-
-extern void slice_init_context(struct mm_struct *mm, unsigned int psize);
-extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
-extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
-                                  unsigned long len, unsigned int psize);
-
-#define slice_mm_new_context(mm)        ((mm)->context.id == 0)
-
-#endif /* __ASSEMBLY__ */
-#else
-#define slice_init()
-#define get_slice_psize(mm, addr)       ((mm)->context.user_psize)
-#define slice_set_user_psize(mm, psize)         \
-do {                                            \
-        (mm)->context.user_psize = (psize);     \
-        (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
-} while (0)
-#define slice_set_range_psize(mm, start, len, psize)    \
-        slice_set_user_psize((mm), (psize))
-#define slice_mm_new_context(mm)        1
-#endif /* CONFIG_PPC_MM_SLICES */
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
-
-#endif /* !CONFIG_HUGETLB_PAGE */
-
-#ifdef MODULE
-#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
-#else
-#define __page_aligned \
-        __attribute__((__aligned__(PAGE_SIZE), \
-                __section__(".data.page_aligned")))
-#endif
-
-#define VM_DATA_DEFAULT_FLAGS \
-        (test_thread_flag(TIF_32BIT) ? \
-         VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
-
-/*
- * This is the default if a program doesn't have a PT_GNU_STACK
- * program header entry. The PPC64 ELF ABI has a non executable stack
- * stack by default, so in the absense of a PT_GNU_STACK program header
- * we turn execute permission off.
- */
-#define VM_STACK_DEFAULT_FLAGS32        (VM_READ | VM_WRITE | VM_EXEC | \
-                                         VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#define VM_STACK_DEFAULT_FLAGS64        (VM_READ | VM_WRITE | \
-                                         VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#define VM_STACK_DEFAULT_FLAGS \
-        (test_thread_flag(TIF_32BIT) ? \
-         VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64)
-
-#include <asm-generic/page.h>
-
-#endif /* _ASM_POWERPC_PAGE_64_H */
diff --git a/include/asm-powerpc/param.h b/include/asm-powerpc/param.h
deleted file mode 100644
index 094f63d4d5ca..000000000000
--- a/include/asm-powerpc/param.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_POWERPC_PARAM_H
-#define _ASM_POWERPC_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ              CONFIG_HZ       /* internal kernel timer frequency */
-#define USER_HZ         100             /* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC  (USER_HZ)       /* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE   4096
-
-#ifndef NOGROUP
-#define NOGROUP         (-1)
-#endif
-
-#define MAXHOSTNAMELEN  64      /* max length of hostname */
-
-#endif  /* _ASM_POWERPC_PARAM_H */
diff --git a/include/asm-powerpc/parport.h b/include/asm-powerpc/parport.h
deleted file mode 100644
index 414c50e2e881..000000000000
--- a/include/asm-powerpc/parport.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * parport.h: platform-specific PC-style parport initialisation
- *
- * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef _ASM_POWERPC_PARPORT_H
-#define _ASM_POWERPC_PARPORT_H
-#ifdef __KERNEL__
-
-#include <asm/prom.h>
-
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-        struct device_node *np;
-        const u32 *prop;
-        u32 io1, io2;
-        int propsize;
-        int count = 0;
-        for (np = NULL; (np = of_find_compatible_node(np,
-                                                      "parallel",
-                                                      "pnpPNP,400")) != NULL;) {
-                prop = of_get_property(np, "reg", &propsize);
-                if (!prop || propsize > 6*sizeof(u32))
-                        continue;
-                io1 = prop[1]; io2 = prop[2];
-                prop = of_get_property(np, "interrupts", NULL);
-                if (!prop)
-                        continue;
-                if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
-                        count++;
-        }
-        return count;
-}
-
-#endif /* __KERNEL__ */
-#endif /* !(_ASM_POWERPC_PARPORT_H) */
diff --git a/include/asm-powerpc/pasemi_dma.h b/include/asm-powerpc/pasemi_dma.h
deleted file mode 100644
index 19fd7933e2d9..000000000000
--- a/include/asm-powerpc/pasemi_dma.h
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * Copyright (C) 2006-2008 PA Semi, Inc
- *
- * Hardware register layout and descriptor formats for the on-board
- * DMA engine on PA Semi PWRficient. Used by ethernet, function and security
- * drivers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef ASM_PASEMI_DMA_H
-#define ASM_PASEMI_DMA_H
-
-/* status register layout in IOB region, at 0xfb800000 */
-struct pasdma_status {
-        u64 rx_sta[64];         /* RX channel status */
-        u64 tx_sta[20];         /* TX channel status */
-};
-
-
-/* All these registers live in the PCI configuration space for the DMA PCI
- * device. Use the normal PCI config access functions for them.
- */
-enum {
-        PAS_DMA_CAP_TXCH  = 0x44,       /* Transmit Channel Info      */
-        PAS_DMA_CAP_RXCH  = 0x48,       /* Transmit Channel Info      */
-        PAS_DMA_CAP_IFI   = 0x4c,       /* Interface Info             */
-        PAS_DMA_COM_TXCMD = 0x100,      /* Transmit Command Register  */
-        PAS_DMA_COM_TXSTA = 0x104,      /* Transmit Status Register   */
-        PAS_DMA_COM_RXCMD = 0x108,      /* Receive Command Register   */
-        PAS_DMA_COM_RXSTA = 0x10c,      /* Receive Status Register    */
-        PAS_DMA_COM_CFG   = 0x114,      /* Common config reg          */
-        PAS_DMA_TXF_SFLG0 = 0x140,      /* Set flags                  */
-        PAS_DMA_TXF_SFLG1 = 0x144,      /* Set flags                  */
-        PAS_DMA_TXF_CFLG0 = 0x148,      /* Set flags                  */
-        PAS_DMA_TXF_CFLG1 = 0x14c,      /* Set flags                  */
-};
-
-
-#define PAS_DMA_CAP_TXCH_TCHN_M 0x00ff0000 /* # of TX channels */
-#define PAS_DMA_CAP_TXCH_TCHN_S 16
-
-#define PAS_DMA_CAP_RXCH_RCHN_M 0x00ff0000 /* # of RX channels */
-#define PAS_DMA_CAP_RXCH_RCHN_S 16
-
-#define PAS_DMA_CAP_IFI_IOFF_M  0xff000000 /* Cfg reg for intf pointers */
-#define PAS_DMA_CAP_IFI_IOFF_S  24
-#define PAS_DMA_CAP_IFI_NIN_M   0x00ff0000 /* # of interfaces */
-#define PAS_DMA_CAP_IFI_NIN_S   16
-
-#define PAS_DMA_COM_TXCMD_EN    0x00000001 /* enable */
-#define PAS_DMA_COM_TXSTA_ACT   0x00000001 /* active */
-#define PAS_DMA_COM_RXCMD_EN    0x00000001 /* enable */
-#define PAS_DMA_COM_RXSTA_ACT   0x00000001 /* active */
-
-
-/* Per-interface and per-channel registers */
-#define _PAS_DMA_RXINT_STRIDE           0x20
-#define PAS_DMA_RXINT_RCMDSTA(i)        (0x200+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_RCMDSTA_EN     0x00000001
-#define    PAS_DMA_RXINT_RCMDSTA_ST     0x00000002
-#define    PAS_DMA_RXINT_RCMDSTA_MBT    0x00000008
-#define    PAS_DMA_RXINT_RCMDSTA_MDR    0x00000010
-#define    PAS_DMA_RXINT_RCMDSTA_MOO    0x00000020
-#define    PAS_DMA_RXINT_RCMDSTA_MBP    0x00000040
-#define    PAS_DMA_RXINT_RCMDSTA_BT     0x00000800
-#define    PAS_DMA_RXINT_RCMDSTA_DR     0x00001000
-#define    PAS_DMA_RXINT_RCMDSTA_OO     0x00002000
-#define    PAS_DMA_RXINT_RCMDSTA_BP     0x00004000
-#define    PAS_DMA_RXINT_RCMDSTA_TB     0x00008000
-#define    PAS_DMA_RXINT_RCMDSTA_ACT    0x00010000
-#define    PAS_DMA_RXINT_RCMDSTA_DROPS_M        0xfffe0000
-#define    PAS_DMA_RXINT_RCMDSTA_DROPS_S        17
-#define PAS_DMA_RXINT_CFG(i)            (0x204+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_CFG_RBP        0x80000000
-#define    PAS_DMA_RXINT_CFG_ITRR       0x40000000
-#define    PAS_DMA_RXINT_CFG_DHL_M      0x07000000
-#define    PAS_DMA_RXINT_CFG_DHL_S      24
-#define    PAS_DMA_RXINT_CFG_DHL(x)     (((x) << PAS_DMA_RXINT_CFG_DHL_S) & \
-                                         PAS_DMA_RXINT_CFG_DHL_M)
-#define    PAS_DMA_RXINT_CFG_ITR        0x00400000
-#define    PAS_DMA_RXINT_CFG_LW         0x00200000
-#define    PAS_DMA_RXINT_CFG_L2         0x00100000
-#define    PAS_DMA_RXINT_CFG_HEN        0x00080000
-#define    PAS_DMA_RXINT_CFG_WIF        0x00000002
-#define    PAS_DMA_RXINT_CFG_WIL        0x00000001
-
-#define PAS_DMA_RXINT_INCR(i)           (0x210+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_INCR_INCR_M    0x0000ffff
-#define    PAS_DMA_RXINT_INCR_INCR_S    0
-#define    PAS_DMA_RXINT_INCR_INCR(x)   ((x) & 0x0000ffff)
-#define PAS_DMA_RXINT_BASEL(i)          (0x218+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_BASEL_BRBL(x)  ((x) & ~0x3f)
-#define PAS_DMA_RXINT_BASEU(i)          (0x21c+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_BASEU_BRBH(x)  ((x) & 0xfff)
-#define    PAS_DMA_RXINT_BASEU_SIZ_M    0x3fff0000      /* # of cache lines worth of buffer ring */
-#define    PAS_DMA_RXINT_BASEU_SIZ_S    16              /* 0 = 16K */
-#define    PAS_DMA_RXINT_BASEU_SIZ(x)   (((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \
-                                         PAS_DMA_RXINT_BASEU_SIZ_M)
-
-
-#define _PAS_DMA_TXCHAN_STRIDE  0x20    /* Size per channel             */
-#define _PAS_DMA_TXCHAN_TCMDSTA 0x300   /* Command / Status             */
-#define _PAS_DMA_TXCHAN_CFG     0x304   /* Configuration                */
-#define _PAS_DMA_TXCHAN_DSCRBU  0x308   /* Descriptor BU Allocation     */
-#define _PAS_DMA_TXCHAN_INCR    0x310   /* Descriptor increment         */
-#define _PAS_DMA_TXCHAN_CNT     0x314   /* Descriptor count/offset      */
-#define _PAS_DMA_TXCHAN_BASEL   0x318   /* Descriptor ring base (low)   */
-#define _PAS_DMA_TXCHAN_BASEU   0x31c   /*                      (high)  */
-#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define    PAS_DMA_TXCHAN_TCMDSTA_EN    0x00000001      /* Enabled */
-#define    PAS_DMA_TXCHAN_TCMDSTA_ST    0x00000002      /* Stop interface */
-#define    PAS_DMA_TXCHAN_TCMDSTA_ACT   0x00010000      /* Active */
-#define    PAS_DMA_TXCHAN_TCMDSTA_SZ    0x00000800
-#define    PAS_DMA_TXCHAN_TCMDSTA_DB    0x00000400
-#define    PAS_DMA_TXCHAN_TCMDSTA_DE    0x00000200
-#define    PAS_DMA_TXCHAN_TCMDSTA_DA    0x00000100
-#define PAS_DMA_TXCHAN_CFG(c)     (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define    PAS_DMA_TXCHAN_CFG_TY_IFACE  0x00000000      /* Type = interface */
-#define    PAS_DMA_TXCHAN_CFG_TY_COPY   0x00000001      /* Type = copy only */
-#define    PAS_DMA_TXCHAN_CFG_TY_FUNC   0x00000002      /* Type = function */
-#define    PAS_DMA_TXCHAN_CFG_TY_XOR    0x00000003      /* Type = xor only */
-#define    PAS_DMA_TXCHAN_CFG_TATTR_M   0x0000003c
-#define    PAS_DMA_TXCHAN_CFG_TATTR_S   2
-#define    PAS_DMA_TXCHAN_CFG_TATTR(x)  (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
-                                         PAS_DMA_TXCHAN_CFG_TATTR_M)
-#define    PAS_DMA_TXCHAN_CFG_LPDQ      0x00000800
-#define    PAS_DMA_TXCHAN_CFG_LPSQ      0x00000400
-#define    PAS_DMA_TXCHAN_CFG_WT_M      0x000003c0
-#define    PAS_DMA_TXCHAN_CFG_WT_S      6
-#define    PAS_DMA_TXCHAN_CFG_WT(x)     (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
-                                         PAS_DMA_TXCHAN_CFG_WT_M)
-#define    PAS_DMA_TXCHAN_CFG_TRD       0x00010000      /* translate data */
-#define    PAS_DMA_TXCHAN_CFG_TRR       0x00008000      /* translate rings */
-#define    PAS_DMA_TXCHAN_CFG_UP        0x00004000      /* update tx descr when sent */
-#define    PAS_DMA_TXCHAN_CFG_CL        0x00002000      /* Clean last line */
-#define    PAS_DMA_TXCHAN_CFG_CF        0x00001000      /* Clean first line */
-#define PAS_DMA_TXCHAN_INCR(c)    (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define PAS_DMA_TXCHAN_BASEL(c)   (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define    PAS_DMA_TXCHAN_BASEL_BRBL_M  0xffffffc0
-#define    PAS_DMA_TXCHAN_BASEL_BRBL_S  0
-#define    PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \
-                                         PAS_DMA_TXCHAN_BASEL_BRBL_M)
-#define PAS_DMA_TXCHAN_BASEU(c)   (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define    PAS_DMA_TXCHAN_BASEU_BRBH_M  0x00000fff
-#define    PAS_DMA_TXCHAN_BASEU_BRBH_S  0
-#define    PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \
-                                         PAS_DMA_TXCHAN_BASEU_BRBH_M)
-/* # of cache lines worth of buffer ring */
-#define    PAS_DMA_TXCHAN_BASEU_SIZ_M   0x3fff0000
-#define    PAS_DMA_TXCHAN_BASEU_SIZ_S   16              /* 0 = 16K */
-#define    PAS_DMA_TXCHAN_BASEU_SIZ(x)  (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \
-                                         PAS_DMA_TXCHAN_BASEU_SIZ_M)
-
-#define _PAS_DMA_RXCHAN_STRIDE  0x20    /* Size per channel             */
-#define _PAS_DMA_RXCHAN_CCMDSTA 0x800   /* Command / Status             */
-#define _PAS_DMA_RXCHAN_CFG     0x804   /* Configuration                */
-#define _PAS_DMA_RXCHAN_INCR    0x810   /* Descriptor increment         */
-#define _PAS_DMA_RXCHAN_CNT     0x814   /* Descriptor count/offset      */
-#define _PAS_DMA_RXCHAN_BASEL   0x818   /* Descriptor ring base (low)   */
-#define _PAS_DMA_RXCHAN_BASEU   0x81c   /*                      (high)  */
-#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define    PAS_DMA_RXCHAN_CCMDSTA_EN    0x00000001      /* Enabled */
-#define    PAS_DMA_RXCHAN_CCMDSTA_ST    0x00000002      /* Stop interface */
-#define    PAS_DMA_RXCHAN_CCMDSTA_ACT   0x00010000      /* Active */
-#define    PAS_DMA_RXCHAN_CCMDSTA_DU    0x00020000
-#define    PAS_DMA_RXCHAN_CCMDSTA_OD    0x00002000
-#define    PAS_DMA_RXCHAN_CCMDSTA_FD    0x00001000
-#define    PAS_DMA_RXCHAN_CCMDSTA_DT    0x00000800
-#define PAS_DMA_RXCHAN_CFG(c)     (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define    PAS_DMA_RXCHAN_CFG_CTR       0x00000400
-#define    PAS_DMA_RXCHAN_CFG_HBU_M     0x00000380
-#define    PAS_DMA_RXCHAN_CFG_HBU_S     7
-#define    PAS_DMA_RXCHAN_CFG_HBU(x)    (((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \
-                                         PAS_DMA_RXCHAN_CFG_HBU_M)
-#define PAS_DMA_RXCHAN_INCR(c)    (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define PAS_DMA_RXCHAN_BASEL(c)   (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define    PAS_DMA_RXCHAN_BASEL_BRBL_M  0xffffffc0
-#define    PAS_DMA_RXCHAN_BASEL_BRBL_S  0
-#define    PAS_DMA_RXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \
-                                         PAS_DMA_RXCHAN_BASEL_BRBL_M)
-#define PAS_DMA_RXCHAN_BASEU(c)   (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define    PAS_DMA_RXCHAN_BASEU_BRBH_M  0x00000fff
-#define    PAS_DMA_RXCHAN_BASEU_BRBH_S  0
-#define    PAS_DMA_RXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \
-                                         PAS_DMA_RXCHAN_BASEU_BRBH_M)
-/* # of cache lines worth of buffer ring */
-#define    PAS_DMA_RXCHAN_BASEU_SIZ_M   0x3fff0000
-#define    PAS_DMA_RXCHAN_BASEU_SIZ_S   16              /* 0 = 16K */
-#define    PAS_DMA_RXCHAN_BASEU_SIZ(x)  (((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \
-                                         PAS_DMA_RXCHAN_BASEU_SIZ_M)
-
-#define    PAS_STATUS_PCNT_M            0x000000000000ffffull
-#define    PAS_STATUS_PCNT_S            0
-#define    PAS_STATUS_DCNT_M            0x00000000ffff0000ull
-#define    PAS_STATUS_DCNT_S            16
-#define    PAS_STATUS_BPCNT_M           0x0000ffff00000000ull
-#define    PAS_STATUS_BPCNT_S           32
-#define    PAS_STATUS_CAUSE_M           0xf000000000000000ull
-#define    PAS_STATUS_TIMER             0x1000000000000000ull
-#define    PAS_STATUS_ERROR             0x2000000000000000ull
-#define    PAS_STATUS_SOFT              0x4000000000000000ull
-#define    PAS_STATUS_INT               0x8000000000000000ull
-
-#define PAS_IOB_COM_PKTHDRCNT           0x120
-#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M      0x0fff0000
-#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S      16
-#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M      0x00000fff
-#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S      0
-
-#define PAS_IOB_DMA_RXCH_CFG(i)         (0x1100 + (i)*4)
-#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_M         0x00000fff
-#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_S         0
-#define    PAS_IOB_DMA_RXCH_CFG_CNTTH(x)        (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \
-                                                 PAS_IOB_DMA_RXCH_CFG_CNTTH_M)
-#define PAS_IOB_DMA_TXCH_CFG(i)         (0x1200 + (i)*4)
-#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_M         0x00000fff
-#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_S         0
-#define    PAS_IOB_DMA_TXCH_CFG_CNTTH(x)        (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \
-                                                 PAS_IOB_DMA_TXCH_CFG_CNTTH_M)
-#define PAS_IOB_DMA_RXCH_STAT(i)        (0x1300 + (i)*4)
-#define    PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000
-#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_M       0x00000fff
-#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_S       0
-#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL(x)      (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\
-                                                 PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
-#define PAS_IOB_DMA_TXCH_STAT(i)        (0x1400 + (i)*4)
-#define    PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000
-#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_M       0x00000fff
-#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_S       0
-#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL(x)      (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\
-                                                 PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
-#define PAS_IOB_DMA_RXCH_RESET(i)       (0x1500 + (i)*4)
-#define    PAS_IOB_DMA_RXCH_RESET_PCNT_M        0xffff0000
-#define    PAS_IOB_DMA_RXCH_RESET_PCNT_S        16
-#define    PAS_IOB_DMA_RXCH_RESET_PCNT(x)       (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
-                                                 PAS_IOB_DMA_RXCH_RESET_PCNT_M)
-#define    PAS_IOB_DMA_RXCH_RESET_PCNTRST       0x00000020
-#define    PAS_IOB_DMA_RXCH_RESET_DCNTRST       0x00000010
-#define    PAS_IOB_DMA_RXCH_RESET_TINTC         0x00000008
-#define    PAS_IOB_DMA_RXCH_RESET_DINTC         0x00000004
-#define    PAS_IOB_DMA_RXCH_RESET_SINTC         0x00000002
-#define    PAS_IOB_DMA_RXCH_RESET_PINTC         0x00000001
-#define PAS_IOB_DMA_TXCH_RESET(i)       (0x1600 + (i)*4)
-#define    PAS_IOB_DMA_TXCH_RESET_PCNT_M        0xffff0000
-#define    PAS_IOB_DMA_TXCH_RESET_PCNT_S        16
-#define    PAS_IOB_DMA_TXCH_RESET_PCNT(x)       (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
-                                                 PAS_IOB_DMA_TXCH_RESET_PCNT_M)
-#define    PAS_IOB_DMA_TXCH_RESET_PCNTRST       0x00000020
-#define    PAS_IOB_DMA_TXCH_RESET_DCNTRST       0x00000010
-#define    PAS_IOB_DMA_TXCH_RESET_TINTC         0x00000008
-#define    PAS_IOB_DMA_TXCH_RESET_DINTC         0x00000004
-#define    PAS_IOB_DMA_TXCH_RESET_SINTC         0x00000002
-#define    PAS_IOB_DMA_TXCH_RESET_PINTC         0x00000001
-
-#define PAS_IOB_DMA_COM_TIMEOUTCFG              0x1700
-#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M    0x00ffffff
-#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S    0
-#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x)   (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \
-                                                 PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M)
-
-/* Transmit descriptor fields */
-#define XCT_MACTX_T             0x8000000000000000ull
-#define XCT_MACTX_ST            0x4000000000000000ull
-#define XCT_MACTX_NORES         0x0000000000000000ull
-#define XCT_MACTX_8BRES         0x1000000000000000ull
-#define XCT_MACTX_24BRES        0x2000000000000000ull
-#define XCT_MACTX_40BRES        0x3000000000000000ull
-#define XCT_MACTX_I             0x0800000000000000ull
-#define XCT_MACTX_O             0x0400000000000000ull
-#define XCT_MACTX_E             0x0200000000000000ull
-#define XCT_MACTX_VLAN_M        0x0180000000000000ull
-#define XCT_MACTX_VLAN_NOP      0x0000000000000000ull
-#define XCT_MACTX_VLAN_REMOVE   0x0080000000000000ull
-#define XCT_MACTX_VLAN_INSERT   0x0100000000000000ull
-#define XCT_MACTX_VLAN_REPLACE  0x0180000000000000ull
-#define XCT_MACTX_CRC_M         0x0060000000000000ull
-#define XCT_MACTX_CRC_NOP       0x0000000000000000ull
-#define XCT_MACTX_CRC_INSERT    0x0020000000000000ull
-#define XCT_MACTX_CRC_PAD       0x0040000000000000ull
-#define XCT_MACTX_CRC_REPLACE   0x0060000000000000ull
-#define XCT_MACTX_SS            0x0010000000000000ull
-#define XCT_MACTX_LLEN_M        0x00007fff00000000ull
-#define XCT_MACTX_LLEN_S        32ull
-#define XCT_MACTX_LLEN(x)       ((((long)(x)) << XCT_MACTX_LLEN_S) & \
-                                 XCT_MACTX_LLEN_M)
-#define XCT_MACTX_IPH_M         0x00000000f8000000ull
-#define XCT_MACTX_IPH_S         27ull
-#define XCT_MACTX_IPH(x)        ((((long)(x)) << XCT_MACTX_IPH_S) & \
-                                 XCT_MACTX_IPH_M)
-#define XCT_MACTX_IPO_M         0x0000000007c00000ull
-#define XCT_MACTX_IPO_S         22ull
-#define XCT_MACTX_IPO(x)        ((((long)(x)) << XCT_MACTX_IPO_S) & \
-                                 XCT_MACTX_IPO_M)
-#define XCT_MACTX_CSUM_M        0x0000000000000060ull
-#define XCT_MACTX_CSUM_NOP      0x0000000000000000ull
-#define XCT_MACTX_CSUM_TCP      0x0000000000000040ull
-#define XCT_MACTX_CSUM_UDP      0x0000000000000060ull
-#define XCT_MACTX_V6            0x0000000000000010ull
-#define XCT_MACTX_C             0x0000000000000004ull
-#define XCT_MACTX_AL2           0x0000000000000002ull
-
-/* Receive descriptor fields */
-#define XCT_MACRX_T             0x8000000000000000ull
-#define XCT_MACRX_ST            0x4000000000000000ull
-#define XCT_MACRX_RR_M          0x3000000000000000ull
-#define XCT_MACRX_RR_NORES      0x0000000000000000ull
-#define XCT_MACRX_RR_8BRES      0x1000000000000000ull
-#define XCT_MACRX_O             0x0400000000000000ull
-#define XCT_MACRX_E             0x0200000000000000ull
-#define XCT_MACRX_FF            0x0100000000000000ull
-#define XCT_MACRX_PF            0x0080000000000000ull
-#define XCT_MACRX_OB            0x0040000000000000ull
-#define XCT_MACRX_OD            0x0020000000000000ull
-#define XCT_MACRX_FS            0x0010000000000000ull
-#define XCT_MACRX_NB_M          0x000fc00000000000ull
-#define XCT_MACRX_NB_S          46ULL
-#define XCT_MACRX_NB(x)         ((((long)(x)) << XCT_MACRX_NB_S) & \
-                                 XCT_MACRX_NB_M)
-#define XCT_MACRX_LLEN_M        0x00003fff00000000ull
-#define XCT_MACRX_LLEN_S        32ULL
-#define XCT_MACRX_LLEN(x)       ((((long)(x)) << XCT_MACRX_LLEN_S) & \
-                                 XCT_MACRX_LLEN_M)
-#define XCT_MACRX_CRC           0x0000000080000000ull
-#define XCT_MACRX_LEN_M         0x0000000060000000ull
-#define XCT_MACRX_LEN_TOOSHORT  0x0000000020000000ull
-#define XCT_MACRX_LEN_BELOWMIN  0x0000000040000000ull
-#define XCT_MACRX_LEN_TRUNC     0x0000000060000000ull
-#define XCT_MACRX_CAST_M        0x0000000018000000ull
-#define XCT_MACRX_CAST_UNI      0x0000000000000000ull
-#define XCT_MACRX_CAST_MULTI    0x0000000008000000ull
-#define XCT_MACRX_CAST_BROAD    0x0000000010000000ull
-#define XCT_MACRX_CAST_PAUSE    0x0000000018000000ull
-#define XCT_MACRX_VLC_M         0x0000000006000000ull
-#define XCT_MACRX_FM            0x0000000001000000ull
-#define XCT_MACRX_HTY_M         0x0000000000c00000ull
-#define XCT_MACRX_HTY_IPV4_OK   0x0000000000000000ull
-#define XCT_MACRX_HTY_IPV6      0x0000000000400000ull
-#define XCT_MACRX_HTY_IPV4_BAD  0x0000000000800000ull
-#define XCT_MACRX_HTY_NONIP     0x0000000000c00000ull
-#define XCT_MACRX_IPP_M         0x00000000003f0000ull
-#define XCT_MACRX_IPP_S         16
-#define XCT_MACRX_CSUM_M        0x000000000000ffffull
-#define XCT_MACRX_CSUM_S        0
-
-#define XCT_PTR_T               0x8000000000000000ull
-#define XCT_PTR_LEN_M           0x7ffff00000000000ull
-#define XCT_PTR_LEN_S           44
-#define XCT_PTR_LEN(x)          ((((long)(x)) << XCT_PTR_LEN_S) & \
-                                 XCT_PTR_LEN_M)
-#define XCT_PTR_ADDR_M          0x00000fffffffffffull
-#define XCT_PTR_ADDR_S          0
-#define XCT_PTR_ADDR(x)         ((((long)(x)) << XCT_PTR_ADDR_S) & \
-                                 XCT_PTR_ADDR_M)
-
-/* Receive interface 8byte result fields */
-#define XCT_RXRES_8B_L4O_M      0xff00000000000000ull
-#define XCT_RXRES_8B_L4O_S      56
-#define XCT_RXRES_8B_RULE_M     0x00ffff0000000000ull
-#define XCT_RXRES_8B_RULE_S     40
-#define XCT_RXRES_8B_EVAL_M     0x000000ffff000000ull
-#define XCT_RXRES_8B_EVAL_S     24
-#define XCT_RXRES_8B_HTYPE_M    0x0000000000f00000ull
-#define XCT_RXRES_8B_HASH_M     0x00000000000fffffull
-#define XCT_RXRES_8B_HASH_S     0
-
-/* Receive interface buffer fields */
-#define XCT_RXB_LEN_M           0x0ffff00000000000ull
-#define XCT_RXB_LEN_S           44
-#define XCT_RXB_LEN(x)          ((((long)(x)) << XCT_RXB_LEN_S) & \
-                                 XCT_RXB_LEN_M)
-#define XCT_RXB_ADDR_M          0x00000fffffffffffull
-#define XCT_RXB_ADDR_S          0
-#define XCT_RXB_ADDR(x)         ((((long)(x)) << XCT_RXB_ADDR_S) & \
-                                 XCT_RXB_ADDR_M)
-
-/* Copy descriptor fields */
-#define XCT_COPY_T              0x8000000000000000ull
-#define XCT_COPY_ST             0x4000000000000000ull
-#define XCT_COPY_RR_M           0x3000000000000000ull
-#define XCT_COPY_RR_NORES       0x0000000000000000ull
-#define XCT_COPY_RR_8BRES       0x1000000000000000ull
-#define XCT_COPY_RR_24BRES      0x2000000000000000ull
-#define XCT_COPY_RR_40BRES      0x3000000000000000ull
-#define XCT_COPY_I              0x0800000000000000ull
-#define XCT_COPY_O              0x0400000000000000ull
-#define XCT_COPY_E              0x0200000000000000ull
-#define XCT_COPY_STY_ZERO       0x01c0000000000000ull
-#define XCT_COPY_DTY_PREF       0x0038000000000000ull
-#define XCT_COPY_LLEN_M         0x0007ffff00000000ull
-#define XCT_COPY_LLEN_S         32
-#define XCT_COPY_LLEN(x)        ((((long)(x)) << XCT_COPY_LLEN_S) & \
-                                 XCT_COPY_LLEN_M)
-#define XCT_COPY_SE             0x0000000000000001ull
-
-/* Function descriptor fields */
-#define XCT_FUN_T               0x8000000000000000ull
-#define XCT_FUN_ST              0x4000000000000000ull
-#define XCT_FUN_RR_M            0x3000000000000000ull
-#define XCT_FUN_RR_NORES        0x0000000000000000ull
-#define XCT_FUN_RR_8BRES        0x1000000000000000ull
-#define XCT_FUN_RR_24BRES       0x2000000000000000ull
-#define XCT_FUN_RR_40BRES       0x3000000000000000ull
-#define XCT_FUN_I               0x0800000000000000ull
-#define XCT_FUN_O               0x0400000000000000ull
-#define XCT_FUN_E               0x0200000000000000ull
-#define XCT_FUN_FUN_M           0x01c0000000000000ull
-#define XCT_FUN_FUN_S           54
-#define XCT_FUN_FUN(x)          ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
-#define XCT_FUN_CRM_M           0x0038000000000000ull
-#define XCT_FUN_CRM_NOP         0x0000000000000000ull
-#define XCT_FUN_CRM_SIG         0x0008000000000000ull
-#define XCT_FUN_LLEN_M          0x0007ffff00000000ull
-#define XCT_FUN_LLEN_S          32
-#define XCT_FUN_LLEN(x)         ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
-#define XCT_FUN_SHL_M           0x00000000f8000000ull
-#define XCT_FUN_SHL_S           27
-#define XCT_FUN_SHL(x)          ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
-#define XCT_FUN_CHL_M           0x0000000007c00000ull
-#define XCT_FUN_HSZ_M           0x00000000003c0000ull
-#define XCT_FUN_ALG_M           0x0000000000038000ull
-#define XCT_FUN_HP              0x0000000000004000ull
-#define XCT_FUN_BCM_M           0x0000000000003800ull
-#define XCT_FUN_BCP_M           0x0000000000000600ull
-#define XCT_FUN_SIG_M           0x00000000000001f0ull
-#define XCT_FUN_SIG_TCP4        0x0000000000000140ull
-#define XCT_FUN_SIG_TCP6        0x0000000000000150ull
-#define XCT_FUN_SIG_UDP4        0x0000000000000160ull
-#define XCT_FUN_SIG_UDP6        0x0000000000000170ull
-#define XCT_FUN_A               0x0000000000000008ull
-#define XCT_FUN_C               0x0000000000000004ull
-#define XCT_FUN_AL2             0x0000000000000002ull
-#define XCT_FUN_SE              0x0000000000000001ull
-
-/* Function descriptor 8byte result fields */
-#define XCT_FUNRES_8B_CS_M      0x0000ffff00000000ull
-#define XCT_FUNRES_8B_CS_S      32
-#define XCT_FUNRES_8B_CRC_M     0x00000000ffffffffull
-#define XCT_FUNRES_8B_CRC_S     0
-
-/* Control descriptor fields */
-#define CTRL_CMD_T              0x8000000000000000ull
-#define CTRL_CMD_META_EVT       0x2000000000000000ull
-#define CTRL_CMD_O              0x0400000000000000ull
-#define CTRL_CMD_ETYPE_M        0x0038000000000000ull
-#define CTRL_CMD_ETYPE_EXT      0x0000000000000000ull
-#define CTRL_CMD_ETYPE_WSET     0x0020000000000000ull
-#define CTRL_CMD_ETYPE_WCLR     0x0028000000000000ull
-#define CTRL_CMD_ETYPE_SET      0x0030000000000000ull
-#define CTRL_CMD_ETYPE_CLR      0x0038000000000000ull
-#define CTRL_CMD_REG_M          0x000000000000007full
-#define CTRL_CMD_REG_S          0
-#define CTRL_CMD_REG(x)         ((((long)(x)) << CTRL_CMD_REG_S) & \
-                                 CTRL_CMD_REG_M)
-
-
-
-/* Prototypes for the shared DMA functions in the platform code. */
-
-/* DMA TX Channel type. Right now only limitations used are event types 0/1,
- * for event-triggered DMA transactions.
- */
-
-enum pasemi_dmachan_type {
-        RXCHAN = 0,             /* Any RX chan */
-        TXCHAN = 1,             /* Any TX chan */
-        TXCHAN_EVT0 = 0x1001,   /* TX chan in event class 0 (chan 0-9) */
-        TXCHAN_EVT1 = 0x2001,   /* TX chan in event class 1 (chan 10-19) */
-};
-
-struct pasemi_dmachan {
-        int              chno;          /* Channel number */
-        enum pasemi_dmachan_type chan_type;     /* TX / RX */
-        u64             *status;        /* Ptr to cacheable status */
-        int              irq;           /* IRQ used by channel */
-        unsigned int     ring_size;     /* size of allocated ring */
-        dma_addr_t       ring_dma;      /* DMA address for ring */
-        u64             *ring_virt;     /* Virt address for ring */
-        void            *priv;          /* Ptr to start of client struct */
-};
-
-/* Read/write the different registers in the I/O Bridge, Ethernet
- * and DMA Controller
- */
-extern unsigned int pasemi_read_iob_reg(unsigned int reg);
-extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val);
-
-extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg);
-extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val);
-
-extern unsigned int pasemi_read_dma_reg(unsigned int reg);
-extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val);
-
-/* Channel management routines */
-
-extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type,
-                                   int total_size, int offset);
-extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan);
-
-extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan,
-                                  const u32 cmdsta);
-extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan);
-
-/* Common routines to allocate rings and buffers */
-
-extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size);
-extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan);
-
-extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size,
-                                  dma_addr_t *handle);
-extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
-                                dma_addr_t *handle);
-
-/* Routines to allocate flags (events) for channel syncronization */
-extern int  pasemi_dma_alloc_flag(void);
-extern void pasemi_dma_free_flag(int flag);
-extern void pasemi_dma_set_flag(int flag);
-extern void pasemi_dma_clear_flag(int flag);
-
-/* Routines to allocate function engines */
-extern int  pasemi_dma_alloc_fun(void);
-extern void pasemi_dma_free_fun(int fun);
-
-/* Initialize the library, must be called before any other functions */
-extern int pasemi_dma_init(void);
-
-#endif /* ASM_PASEMI_DMA_H */
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
deleted file mode 100644
index ae2ea803a0f2..000000000000
--- a/include/asm-powerpc/pci-bridge.h
+++ /dev/null
@@ -1,302 +0,0 @@
-#ifndef _ASM_POWERPC_PCI_BRIDGE_H
-#define _ASM_POWERPC_PCI_BRIDGE_H
-#ifdef __KERNEL__
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/pci.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-
-struct device_node;
-
-extern unsigned int ppc_pci_flags;
-enum {
-        /* Force re-assigning all resources (ignore firmware
-         * setup completely)
-         */
-        PPC_PCI_REASSIGN_ALL_RSRC       = 0x00000001,
-
-        /* Re-assign all bus numbers */
-        PPC_PCI_REASSIGN_ALL_BUS        = 0x00000002,
-
-        /* Do not try to assign, just use existing setup */
-        PPC_PCI_PROBE_ONLY              = 0x00000004,
-
-        /* Don't bother with ISA alignment unless the bridge has
-         * ISA forwarding enabled
-         */
-        PPC_PCI_CAN_SKIP_ISA_ALIGN      = 0x00000008,
-
-        /* Enable domain numbers in /proc */
-        PPC_PCI_ENABLE_PROC_DOMAINS     = 0x00000010,
-        /* ... except for domain 0 */
-        PPC_PCI_COMPAT_DOMAIN_0         = 0x00000020,
-};
-
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
-        struct pci_bus *bus;
-        char is_dynamic;
-#ifdef CONFIG_PPC64
-        int node;
-#endif
-        struct device_node *dn;
-        struct list_head list_node;
-        struct device *parent;
-
-        int first_busno;
-        int last_busno;
-#ifndef CONFIG_PPC64
-        int self_busno;
-#endif
-
-        void __iomem *io_base_virt;
-#ifdef CONFIG_PPC64
-        void *io_base_alloc;
-#endif
-        resource_size_t io_base_phys;
-#ifndef CONFIG_PPC64
-        resource_size_t pci_io_size;
-#endif
-
-        /* Some machines (PReP) have a non 1:1 mapping of
-         * the PCI memory space in the CPU bus space
-         */
-        resource_size_t pci_mem_offset;
-#ifdef CONFIG_PPC64
-        unsigned long pci_io_size;
-#endif
-
-        struct pci_ops *ops;
-        unsigned int __iomem *cfg_addr;
-        void __iomem *cfg_data;
-
-#ifndef CONFIG_PPC64
-        /*
-         * Used for variants of PCI indirect handling and possible quirks:
-         *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
-         *  EXT_REG - provides access to PCI-e extended registers
-         *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
-         *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
-         *   to determine which bus number to match on when generating type0
-         *   config cycles
-         *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
-         *   hanging if we don't have link and try to do config cycles to
-         *   anything but the PHB.  Only allow talking to the PHB if this is
-         *   set.
-         *  BIG_ENDIAN - cfg_addr is a big endian register
-         *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
-         *   the PLB4.  Effectively disable MRM commands by setting this.
-         */
-#define PPC_INDIRECT_TYPE_SET_CFG_TYPE          0x00000001
-#define PPC_INDIRECT_TYPE_EXT_REG               0x00000002
-#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS  0x00000004
-#define PPC_INDIRECT_TYPE_NO_PCIE_LINK          0x00000008
-#define PPC_INDIRECT_TYPE_BIG_ENDIAN            0x00000010
-#define PPC_INDIRECT_TYPE_BROKEN_MRM            0x00000020
-        u32 indirect_type;
-#endif  /* !CONFIG_PPC64 */
-        /* Currently, we limit ourselves to 1 IO range and 3 mem
-         * ranges since the common pci_bus structure can't handle more
-         */
-        struct resource io_resource;
-        struct resource mem_resources[3];
-        int global_number;              /* PCI domain number */
-#ifdef CONFIG_PPC64
-        unsigned long buid;
-        unsigned long dma_window_base_cur;
-        unsigned long dma_window_size;
-
-        void *private_data;
-#endif  /* CONFIG_PPC64 */
-};
-
-#ifndef CONFIG_PPC64
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-        return bus->sysdata;
-}
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
-        /* No specific ISA handling on ppc32 at this stage, it
-         * all goes through PCI
-         */
-        return 0;
-}
-
-/* These are used for config access before all the PCI probing
-   has been done. */
-extern int early_read_config_byte(struct pci_controller *hose, int bus,
-                        int dev_fn, int where, u8 *val);
-extern int early_read_config_word(struct pci_controller *hose, int bus,
-                        int dev_fn, int where, u16 *val);
-extern int early_read_config_dword(struct pci_controller *hose, int bus,
-                        int dev_fn, int where, u32 *val);
-extern int early_write_config_byte(struct pci_controller *hose, int bus,
-                        int dev_fn, int where, u8 val);
-extern int early_write_config_word(struct pci_controller *hose, int bus,
-                        int dev_fn, int where, u16 val);
-extern int early_write_config_dword(struct pci_controller *hose, int bus,
-                        int dev_fn, int where, u32 val);
-
-extern int early_find_capability(struct pci_controller *hose, int bus,
-                                 int dev_fn, int cap);
-
-extern void setup_indirect_pci(struct pci_controller* hose,
-                               resource_size_t cfg_addr,
-                               resource_size_t cfg_data, u32 flags);
-extern void setup_grackle(struct pci_controller *hose);
-#else   /* CONFIG_PPC64 */
-
-/*
- * PCI stuff, for nodes representing PCI devices, pointed to
- * by device_node->data.
- */
-struct iommu_table;
-
-struct pci_dn {
-        int     busno;                  /* pci bus number */
-        int     devfn;                  /* pci device and function number */
-
-        struct  pci_controller *phb;    /* for pci devices */
-        struct  iommu_table *iommu_table;       /* for phb's or bridges */
-        struct  device_node *node;      /* back-pointer to the device_node */
-
-        int     pci_ext_config_space;   /* for pci devices */
-
-#ifdef CONFIG_EEH
-        struct  pci_dev *pcidev;        /* back-pointer to the pci device */
-        int     class_code;             /* pci device class */
-        int     eeh_mode;               /* See eeh.h for possible EEH_MODEs */
-        int     eeh_config_addr;
-        int     eeh_pe_config_addr; /* new-style partition endpoint address */
-        int     eeh_check_count;        /* # times driver ignored error */
-        int     eeh_freeze_count;       /* # times this device froze up. */
-        int     eeh_false_positives;    /* # times this device reported #ff's */
-        u32     config_space[16];       /* saved PCI config space */
-#endif
-};
-
-/* Get the pointer to a device_node's pci_dn */
-#define PCI_DN(dn)      ((struct pci_dn *) (dn)->data)
-
-extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
-
-/* Get a device_node from a pci_dev.  This code must be fast except
- * in the case where the sysdata is incorrect and needs to be fixed
- * up (this will only happen once).
- * In this case the sysdata will have been inherited from a PCI host
- * bridge or a PCI-PCI bridge further up the tree, so it will point
- * to a valid struct pci_dn, just not the one we want.
- */
-static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
-{
-        struct device_node *dn = dev->sysdata;
-        struct pci_dn *pdn = dn->data;
-
-        if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number)
-                return dn;      /* fast path.  sysdata is good */
-        return fetch_dev_dn(dev);
-}
-
-static inline int pci_device_from_OF_node(struct device_node *np,
-                                          u8 *bus, u8 *devfn)
-{
-        if (!PCI_DN(np))
-                return -ENODEV;
-        *bus = PCI_DN(np)->busno;
-        *devfn = PCI_DN(np)->devfn;
-        return 0;
-}
-
-static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
-{
-        if (bus->self)
-                return pci_device_to_OF_node(bus->self);
-        else
-                return bus->sysdata; /* Must be root bus (PHB) */
-}
-
-/** Find the bus corresponding to the indicated device node */
-extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
-
-/** Remove all of the PCI devices under this bus */
-extern void pcibios_remove_pci_devices(struct pci_bus *bus);
-
-/** Discover new pci devices under this bus, and add them */
-extern void pcibios_add_pci_devices(struct pci_bus *bus);
-extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
-
-extern int pcibios_remove_root_bus(struct pci_controller *phb);
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-        struct device_node *busdn = bus->sysdata;
-
-        BUG_ON(busdn == NULL);
-        return PCI_DN(busdn)->phb;
-}
-
-
-extern void isa_bridge_find_early(struct pci_controller *hose);
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
-        /* Check if address hits the reserved legacy IO range */
-        unsigned long ea = (unsigned long)address;
-        return ea >= ISA_IO_BASE && ea < ISA_IO_END;
-}
-
-extern int pcibios_unmap_io_space(struct pci_bus *bus);
-extern int pcibios_map_io_space(struct pci_bus *bus);
-
-/* Return values for ppc_md.pci_probe_mode function */
-#define PCI_PROBE_NONE          -1      /* Don't look at this bus at all */
-#define PCI_PROBE_NORMAL        0       /* Do normal PCI probing */
-#define PCI_PROBE_DEVTREE       1       /* Instantiate from device tree */
-
-#ifdef CONFIG_NUMA
-#define PHB_SET_NODE(PHB, NODE)         ((PHB)->node = (NODE))
-#else
-#define PHB_SET_NODE(PHB, NODE)         ((PHB)->node = -1)
-#endif
-
-#endif  /* CONFIG_PPC64 */
-
-/* Get the PCI host controller for an OF device */
-extern struct pci_controller *pci_find_hose_for_OF_device(
-                        struct device_node* node);
-
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-                        struct device_node *dev, int primary);
-
-/* Allocate & free a PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
-extern void pcibios_free_controller(struct pci_controller *phb);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-extern int pcibios_vaddr_is_ioport(void __iomem *address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-        return (unsigned long)-1;
-}
-static inline int pcibios_vaddr_is_ioport(void __iomem *address)
-{
-        return 0;
-}
-#endif  /* CONFIG_PCI */
-
-#endif  /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_PCI_BRIDGE_H */
diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h
deleted file mode 100644
index a05a942b1c25..000000000000
--- a/include/asm-powerpc/pci.h
+++ /dev/null
@@ -1,228 +0,0 @@
-#ifndef __ASM_POWERPC_PCI_H
-#define __ASM_POWERPC_PCI_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/machdep.h>
-#include <asm/scatterlist.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#include <asm-generic/pci-dma-compat.h>
-
-#define PCIBIOS_MIN_IO          0x1000
-#define PCIBIOS_MIN_MEM         0x10000000
-
-struct pci_dev;
-
-/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
-#define IOBASE_BRIDGE_NUMBER    0
-#define IOBASE_MEMORY           1
-#define IOBASE_IO               2
-#define IOBASE_ISA_IO           3
-#define IOBASE_ISA_MEM          4
-
-/*
- * Set this to 1 if you want the kernel to re-assign all PCI
- * bus numbers (don't do that on ppc64 yet !)
- */
-#define pcibios_assign_all_busses()     (ppc_pci_flags & \
-                                         PPC_PCI_REASSIGN_ALL_BUS)
-#define pcibios_scan_all_fns(a, b)      0
-
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
-        /* No special bus mastering setup handling */
-}
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-        /* We don't do dynamic PCI IRQ allocation */
-}
-
-#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-        if (ppc_md.pci_get_legacy_ide_irq)
-                return ppc_md.pci_get_legacy_ide_irq(dev, channel);
-        return channel ? 15 : 14;
-}
-
-#ifdef CONFIG_PPC64
-
-/*
- * We want to avoid touching the cacheline size or MWI bit.
- * pSeries firmware sets the cacheline size (which is not the cpu cacheline
- * size in all cases) and hardware treats MWI the same as memory write.
- */
-#define PCI_DISABLE_MWI
-
-#ifdef CONFIG_PCI
-extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
-extern struct dma_mapping_ops *get_pci_dma_ops(void);
-
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-                                        enum pci_dma_burst_strategy *strat,
-                                        unsigned long *strategy_parameter)
-{
-        unsigned long cacheline_size;
-        u8 byte;
-
-        pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
-        if (byte == 0)
-                cacheline_size = 1024;
-        else
-                cacheline_size = (int) byte * 4;
-
-        *strat = PCI_DMA_BURST_MULTIPLE;
-        *strategy_parameter = cacheline_size;
-}
-#else   /* CONFIG_PCI */
-#define set_pci_dma_ops(d)
-#define get_pci_dma_ops()       NULL
-#endif
-
-#else /* 32-bit */
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-                                        enum pci_dma_burst_strategy *strat,
-                                        unsigned long *strategy_parameter)
-{
-        *strat = PCI_DMA_BURST_INFINITY;
-        *strategy_parameter = ~0UL;
-}
-#endif
-#endif /* CONFIG_PPC64 */
-
-extern int pci_domain_nr(struct pci_bus *bus);
-
-/* Decide whether to display the domain number in /proc */
-extern int pci_proc_domain(struct pci_bus *bus);
-
-
-struct vm_area_struct;
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
-                        enum pci_mmap_state mmap_state, int write_combine);
-
-/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP   1
-
-#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
-/*
- * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
- * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
- * so on are not nops.
- * and thus...
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
-        dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)         \
-        __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)                  \
-        ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)         \
-        (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)                    \
-        ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)           \
-        (((PTR)->LEN_NAME) = (VAL))
-
-#else /* 32-bit && coherent */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)          (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)            (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)   do { } while (0)
-
-#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
-
-#ifdef CONFIG_PPC64
-
-/* The PCI address space does not equal the physical memory address
- * space (we have an IOMMU).  The IDE and SCSI device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS     (0)
-
-#else /* 32-bit */
-
-/* The PCI address space does equal the physical memory
- * address space (no IOMMU).  The IDE and SCSI device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS     (1)
-
-#endif /* CONFIG_PPC64 */
-
-extern void pcibios_resource_to_bus(struct pci_dev *dev,
-                        struct pci_bus_region *region,
-                        struct resource *res);
-
-extern void pcibios_bus_to_resource(struct pci_dev *dev,
-                        struct resource *res,
-                        struct pci_bus_region *region);
-
-static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
-                        struct resource *res)
-{
-        struct resource *root = NULL;
-
-        if (res->flags & IORESOURCE_IO)
-                root = &ioport_resource;
-        if (res->flags & IORESOURCE_MEM)
-                root = &iomem_resource;
-
-        return root;
-}
-
-extern void pcibios_setup_new_device(struct pci_dev *dev);
-
-extern void pcibios_claim_one_bus(struct pci_bus *b);
-
-extern void pcibios_resource_survey(void);
-
-extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
-
-extern struct pci_dev *of_create_pci_dev(struct device_node *node,
-                                        struct pci_bus *bus, int devfn);
-
-extern void of_scan_pci_bridge(struct device_node *node,
-                                struct pci_dev *dev);
-
-extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
-
-extern int pci_read_irq_line(struct pci_dev *dev);
-
-struct file;
-extern pgprot_t pci_phys_mem_access_prot(struct file *file,
-                                         unsigned long pfn,
-                                         unsigned long size,
-                                         pgprot_t prot);
-
-#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
-                                 const struct resource *rsrc,
-                                 resource_size_t *start, resource_size_t *end);
-
-extern void pcibios_do_bus_setup(struct pci_bus *bus);
-extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
-
-#endif  /* __KERNEL__ */
-#endif /* __ASM_POWERPC_PCI_H */
diff --git a/include/asm-powerpc/percpu.h b/include/asm-powerpc/percpu.h
deleted file mode 100644
index f879252b7ea6..000000000000
--- a/include/asm-powerpc/percpu.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASM_POWERPC_PERCPU_H_
-#define _ASM_POWERPC_PERCPU_H_
-#ifdef __powerpc64__
-#include <linux/compiler.h>
-
-/*
- * Same as asm-generic/percpu.h, except that we store the per cpu offset
- * in the paca. Based on the x86-64 implementation.
- */
-
-#ifdef CONFIG_SMP
-
-#include <asm/paca.h>
-
-#define __per_cpu_offset(cpu) (paca[cpu].data_offset)
-#define __my_cpu_offset local_paca->data_offset
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-#endif /* CONFIG_SMP */
-#endif /* __powerpc64__ */
-
-#include <asm-generic/percpu.h>
-
-#endif /* _ASM_POWERPC_PERCPU_H_ */
diff --git a/include/asm-powerpc/pgalloc-32.h b/include/asm-powerpc/pgalloc-32.h
deleted file mode 100644
index 58c07147b3ea..000000000000
--- a/include/asm-powerpc/pgalloc-32.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _ASM_POWERPC_PGALLOC_32_H
-#define _ASM_POWERPC_PGALLOC_32_H
-
-#include <linux/threads.h>
-
-extern void __bad_pte(pmd_t *pmd);
-
-extern pgd_t *pgd_alloc(struct mm_struct *mm);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-/*
- * We don't have any real pmd's, and this code never triggers because
- * the pgd will always be present..
- */
-/* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
-#define pmd_free(mm, x)                 do { } while (0)
-#define __pmd_free_tlb(tlb,x)           do { } while (0)
-/* #define pgd_populate(mm, pmd, pte)      BUG() */
-
-#ifndef CONFIG_BOOKE
-#define pmd_populate_kernel(mm, pmd, pte)       \
-                (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte)      \
-                (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-#else
-#define pmd_populate_kernel(mm, pmd, pte)       \
-                (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte)      \
-                (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-#endif
-
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
-extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
-extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
-extern void pte_free(struct mm_struct *mm, pgtable_t pte);
-
-#define __pte_free_tlb(tlb, pte)        pte_free((tlb)->mm, (pte))
-
-#define check_pgt_cache()       do { } while (0)
-
-#endif /* _ASM_POWERPC_PGALLOC_32_H */
diff --git a/include/asm-powerpc/pgalloc-64.h b/include/asm-powerpc/pgalloc-64.h
deleted file mode 100644
index 812a1d8f35cb..000000000000
--- a/include/asm-powerpc/pgalloc-64.h
+++ /dev/null
@@ -1,166 +0,0 @@
-#ifndef _ASM_POWERPC_PGALLOC_64_H
-#define _ASM_POWERPC_PGALLOC_64_H
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/cpumask.h>
-#include <linux/percpu.h>
-
-#ifndef CONFIG_PPC_SUBPAGE_PROT
-static inline void subpage_prot_free(pgd_t *pgd) {}
-#endif
-
-extern struct kmem_cache *pgtable_cache[];
-
-#define PGD_CACHE_NUM           0
-#define PUD_CACHE_NUM           1
-#define PMD_CACHE_NUM           1
-#define HUGEPTE_CACHE_NUM       2
-#define PTE_NONCACHE_NUM        7  /* from GFP rather than kmem_cache */
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-        return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-        subpage_prot_free(pgd);
-        kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
-}
-
-#ifndef CONFIG_PPC_64K_PAGES
-
-#define pgd_populate(MM, PGD, PUD)      pgd_set(PGD, PUD)
-
-static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-        return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
-                                GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pud_free(struct mm_struct *mm, pud_t *pud)
-{
-        kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
-}
-
-static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
-        pud_set(pud, (unsigned long)pmd);
-}
-
-#define pmd_populate(mm, pmd, pte_page) \
-        pmd_populate_kernel(mm, pmd, page_address(pte_page))
-#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-
-#else /* CONFIG_PPC_64K_PAGES */
-
-#define pud_populate(mm, pud, pmd)      pud_set(pud, (unsigned long)pmd)
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
-                                       pte_t *pte)
-{
-        pmd_set(pmd, (unsigned long)pte);
-}
-
-#define pmd_populate(mm, pmd, pte_page) \
-        pmd_populate_kernel(mm, pmd, page_address(pte_page))
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-#endif /* CONFIG_PPC_64K_PAGES */
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-        return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
-                                GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-        kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
-}
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-                                          unsigned long address)
-{
-        return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
-                                        unsigned long address)
-{
-        struct page *page;
-        pte_t *pte;
-
-        pte = pte_alloc_one_kernel(mm, address);
-        if (!pte)
-                return NULL;
-        page = virt_to_page(pte);
-        pgtable_page_ctor(page);
-        return page;
-}
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-        free_page((unsigned long)pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
-{
-        pgtable_page_dtor(ptepage);
-        __free_page(ptepage);
-}
-
-#define PGF_CACHENUM_MASK       0x7
-
-typedef struct pgtable_free {
-        unsigned long val;
-} pgtable_free_t;
-
-static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
-                                                unsigned long mask)
-{
-        BUG_ON(cachenum > PGF_CACHENUM_MASK);
-
-        return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
-}
-
-static inline void pgtable_free(pgtable_free_t pgf)
-{
-        void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
-        int cachenum = pgf.val & PGF_CACHENUM_MASK;
-
-        if (cachenum == PTE_NONCACHE_NUM)
-                free_page((unsigned long)p);
-        else
-                kmem_cache_free(pgtable_cache[cachenum], p);
-}
-
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
-
-#define __pte_free_tlb(tlb,ptepage)     \
-do { \
-        pgtable_page_dtor(ptepage); \
-        pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
-                PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
-} while (0)
-#define __pmd_free_tlb(tlb, pmd)        \
-        pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
-                PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
-#ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud)        \
-        pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
-                PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
-#endif /* CONFIG_PPC_64K_PAGES */
-
-#define check_pgt_cache()       do { } while (0)
-
-#endif /* _ASM_POWERPC_PGALLOC_64_H */
diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h
deleted file mode 100644
index b4505ed0f0f2..000000000000
--- a/include/asm-powerpc/pgalloc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_POWERPC_PGALLOC_H
-#define _ASM_POWERPC_PGALLOC_H
-#ifdef __KERNEL__
-
-#ifdef CONFIG_PPC64
-#include <asm/pgalloc-64.h>
-#else
-#include <asm/pgalloc-32.h>
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h
deleted file mode 100644
index 6b18ba9d2d85..000000000000
--- a/include/asm-powerpc/pgtable-4k.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_4K_H
-#define _ASM_POWERPC_PGTABLE_4K_H
-/*
- * Entries per page directory level.  The PTE level must use a 64b record
- * for each page table entry.  The PMD and PGD level use a 32b record for
- * each entry by assuming that each entry is page aligned.
- */
-#define PTE_INDEX_SIZE  9
-#define PMD_INDEX_SIZE  7
-#define PUD_INDEX_SIZE  7
-#define PGD_INDEX_SIZE  9
-
-#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE  (sizeof(pte_t) << PTE_INDEX_SIZE)
-#define PMD_TABLE_SIZE  (sizeof(pmd_t) << PMD_INDEX_SIZE)
-#define PUD_TABLE_SIZE  (sizeof(pud_t) << PUD_INDEX_SIZE)
-#define PGD_TABLE_SIZE  (sizeof(pgd_t) << PGD_INDEX_SIZE)
-#endif  /* __ASSEMBLY__ */
-
-#define PTRS_PER_PTE    (1 << PTE_INDEX_SIZE)
-#define PTRS_PER_PMD    (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PUD    (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PGD    (1 << PGD_INDEX_SIZE)
-
-/* PMD_SHIFT determines what a second-level page table entry can map */
-#define PMD_SHIFT       (PAGE_SHIFT + PTE_INDEX_SIZE)
-#define PMD_SIZE        (1UL << PMD_SHIFT)
-#define PMD_MASK        (~(PMD_SIZE-1))
-
-/* With 4k base page size, hugepage PTEs go at the PMD level */
-#define MIN_HUGEPTE_SHIFT       PMD_SHIFT
-
-/* PUD_SHIFT determines what a third-level page table entry can map */
-#define PUD_SHIFT       (PMD_SHIFT + PMD_INDEX_SIZE)
-#define PUD_SIZE        (1UL << PUD_SHIFT)
-#define PUD_MASK        (~(PUD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
-#define PGDIR_SHIFT     (PUD_SHIFT + PUD_INDEX_SIZE)
-#define PGDIR_SIZE      (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK      (~(PGDIR_SIZE-1))
-
-/* PTE bits */
-#define _PAGE_HASHPTE   0x0400 /* software: pte has an associated HPTE */
-#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
-#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
-#define _PAGE_F_SECOND  _PAGE_SECONDARY
-#define _PAGE_F_GIX     _PAGE_GROUP_IX
-#define _PAGE_SPECIAL   0x10000 /* software: special page */
-#define __HAVE_ARCH_PTE_SPECIAL
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
-                         _PAGE_SECONDARY | _PAGE_GROUP_IX)
-
-/* There is no 4K PFN hack on 4K pages */
-#define _PAGE_4K_PFN    0
-
-/* PAGE_MASK gives the right answer below, but only by accident */
-/* It should be preserving the high 48 bits and then specifically */
-/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
-#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
-                         _PAGE_HPTEFLAGS)
-
-/* Bits to mask out from a PMD to get to the PTE page */
-#define PMD_MASKED_BITS         0
-/* Bits to mask out from a PUD to get to the PMD page */
-#define PUD_MASKED_BITS         0
-/* Bits to mask out from a PGD to get to the PUD page */
-#define PGD_MASKED_BITS         0
-
-/* shift to put page number into pte */
-#define PTE_RPN_SHIFT   (17)
-
-#ifdef STRICT_MM_TYPECHECKS
-#define __real_pte(e,p)         ((real_pte_t){(e)})
-#define __rpte_to_pte(r)        ((r).pte)
-#else
-#define __real_pte(e,p)         (e)
-#define __rpte_to_pte(r)        (__pte(r))
-#endif
-#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12)
-
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
-        do {                                                             \
-                index = 0;                                               \
-                shift = mmu_psize_defs[psize].shift;                     \
-
-#define pte_iterate_hashed_end() } while(0)
-
-#ifdef CONFIG_PPC_HAS_HASH_64K
-#define pte_pagesize_index(mm, addr, pte)       get_slice_psize(mm, addr)
-#else
-#define pte_pagesize_index(mm, addr, pte)       MMU_PAGE_4K
-#endif
-
-/*
- * 4-level page tables related bits
- */
-
-#define pgd_none(pgd)           (!pgd_val(pgd))
-#define pgd_bad(pgd)            (pgd_val(pgd) == 0)
-#define pgd_present(pgd)        (pgd_val(pgd) != 0)
-#define pgd_clear(pgdp)         (pgd_val(*(pgdp)) = 0)
-#define pgd_page_vaddr(pgd)     (pgd_val(pgd) & ~PGD_MASKED_BITS)
-#define pgd_page(pgd)           virt_to_page(pgd_page_vaddr(pgd))
-
-#define pud_offset(pgdp, addr)  \
-  (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
-    (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
-
-#define pud_ERROR(e) \
-        printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
-
-#define remap_4k_pfn(vma, addr, pfn, prot)      \
-        remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
-#endif /* _ASM_POWERPC_PGTABLE_4K_H */
diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h
deleted file mode 100644
index 07b0d8f09cb6..000000000000
--- a/include/asm-powerpc/pgtable-64k.h
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_64K_H
-#define _ASM_POWERPC_PGTABLE_64K_H
-
-#include <asm-generic/pgtable-nopud.h>
-
-
-#define PTE_INDEX_SIZE  12
-#define PMD_INDEX_SIZE  12
-#define PUD_INDEX_SIZE  0
-#define PGD_INDEX_SIZE  4
-
-#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE  (sizeof(real_pte_t) << PTE_INDEX_SIZE)
-#define PMD_TABLE_SIZE  (sizeof(pmd_t) << PMD_INDEX_SIZE)
-#define PGD_TABLE_SIZE  (sizeof(pgd_t) << PGD_INDEX_SIZE)
-
-#define PTRS_PER_PTE    (1 << PTE_INDEX_SIZE)
-#define PTRS_PER_PMD    (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PGD    (1 << PGD_INDEX_SIZE)
-
-#ifdef CONFIG_PPC_SUBPAGE_PROT
-/*
- * For the sub-page protection option, we extend the PGD with one of
- * these.  Basically we have a 3-level tree, with the top level being
- * the protptrs array.  To optimize speed and memory consumption when
- * only addresses < 4GB are being protected, pointers to the first
- * four pages of sub-page protection words are stored in the low_prot
- * array.
- * Each page of sub-page protection words protects 1GB (4 bytes
- * protects 64k).  For the 3-level tree, each page of pointers then
- * protects 8TB.
- */
-struct subpage_prot_table {
-        unsigned long maxaddr;  /* only addresses < this are protected */
-        unsigned int **protptrs[2];
-        unsigned int *low_prot[4];
-};
-
-#undef PGD_TABLE_SIZE
-#define PGD_TABLE_SIZE          ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \
-                                 sizeof(struct subpage_prot_table))
-
-#define SBP_L1_BITS             (PAGE_SHIFT - 2)
-#define SBP_L2_BITS             (PAGE_SHIFT - 3)
-#define SBP_L1_COUNT            (1 << SBP_L1_BITS)
-#define SBP_L2_COUNT            (1 << SBP_L2_BITS)
-#define SBP_L2_SHIFT            (PAGE_SHIFT + SBP_L1_BITS)
-#define SBP_L3_SHIFT            (SBP_L2_SHIFT + SBP_L2_BITS)
-
-extern void subpage_prot_free(pgd_t *pgd);
-
-static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
-{
-        return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD);
-}
-#endif /* CONFIG_PPC_SUBPAGE_PROT */
-#endif  /* __ASSEMBLY__ */
-
-/* With 4k base page size, hugepage PTEs go at the PMD level */
-#define MIN_HUGEPTE_SHIFT       PAGE_SHIFT
-
-/* PMD_SHIFT determines what a second-level page table entry can map */
-#define PMD_SHIFT       (PAGE_SHIFT + PTE_INDEX_SIZE)
-#define PMD_SIZE        (1UL << PMD_SHIFT)
-#define PMD_MASK        (~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT     (PMD_SHIFT + PMD_INDEX_SIZE)
-#define PGDIR_SIZE      (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK      (~(PGDIR_SIZE-1))
-
-/* Additional PTE bits (don't change without checking asm in hash_low.S) */
-#define __HAVE_ARCH_PTE_SPECIAL
-#define _PAGE_SPECIAL   0x00000400 /* software: special page */
-#define _PAGE_HPTE_SUB  0x0ffff000 /* combo only: sub pages HPTE bits */
-#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */
-#define _PAGE_COMBO     0x10000000 /* this is a combo 4k page */
-#define _PAGE_4K_PFN    0x20000000 /* PFN is for a single 4k page */
-
-/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
- * we set that to be the whole sub-bits mask. The C code will only
- * test this, so a multi-bit mask will work. For combo pages, this
- * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
- * all the sub bits. For real 64k pages, we now have the assembly set
- * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
- * that mask. This is fine as long as the HIDX bits are never set on
- * a PTE that isn't hashed, which is the case today.
- *
- * A little nit is for the huge page C code, which does the hashing
- * in C, we need to provide which bit to use.
- */
-#define _PAGE_HASHPTE   _PAGE_HPTE_SUB
-
-/* Note the full page bits must be in the same location as for normal
- * 4k pages as the same asssembly will be used to insert 64K pages
- * wether the kernel has CONFIG_PPC_64K_PAGES or not
- */
-#define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
-#define _PAGE_F_GIX     0x00007000 /* full page: hidx bits */
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
-
-/* Shift to put page number into pte.
- *
- * That gives us a max RPN of 34 bits, which means a max of 50 bits
- * of addressable physical space, or 46 bits for the special 4k PFNs.
- */
-#define PTE_RPN_SHIFT   (30)
-#define PTE_RPN_MAX     (1UL << (64 - PTE_RPN_SHIFT))
-#define PTE_RPN_MASK    (~((1UL<<PTE_RPN_SHIFT)-1))
-
-/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
- * pgprot changes
- */
-#define _PAGE_CHG_MASK  (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
-                         _PAGE_ACCESSED)
-
-/* Bits to mask out from a PMD to get to the PTE page */
-#define PMD_MASKED_BITS         0x1ff
-/* Bits to mask out from a PGD/PUD to get to the PMD page */
-#define PUD_MASKED_BITS         0x1ff
-
-/* Manipulate "rpte" values */
-#define __real_pte(e,p)         ((real_pte_t) { \
-        (e), pte_val(*((p) + PTRS_PER_PTE)) })
-#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
-        (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
-#define __rpte_to_pte(r)        ((r).pte)
-#define __rpte_sub_valid(rpte, index) \
-        (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
-
-
-/* Trick: we set __end to va + 64k, which happens works for
- * a 16M page as well as we want only one iteration
- */
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)          \
-        do {                                                                \
-                unsigned long __end = va + PAGE_SIZE;                       \
-                unsigned __split = (psize == MMU_PAGE_4K ||                 \
-                                    psize == MMU_PAGE_64K_AP);              \
-                shift = mmu_psize_defs[psize].shift;                        \
-                for (index = 0; va < __end; index++, va += (1L << shift)) { \
-                        if (!__split || __rpte_sub_valid(rpte, index)) do { \
-
-#define pte_iterate_hashed_end() } while(0); } } while(0)
-
-#define pte_pagesize_index(mm, addr, pte)       \
-        (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
-
-#define remap_4k_pfn(vma, addr, pfn, prot)                              \
-        remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,                \
-                        __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
-
-#endif /* _ASM_POWERPC_PGTABLE_64K_H */
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
deleted file mode 100644
index 6fe39e327047..000000000000
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ /dev/null
@@ -1,802 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
-#define _ASM_POWERPC_PGTABLE_PPC32_H
-
-#include <asm-generic/pgtable-nopmd.h>
-
-#ifndef __ASSEMBLY__
-#include <linux/sched.h>
-#include <linux/threads.h>
-#include <asm/io.h>                     /* For sub-arch specific PPC_PIN_SIZE */
-
-extern unsigned long va_to_phys(unsigned long address);
-extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
-
-#ifdef CONFIG_44x
-extern int icache_44x_need_flush;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The PowerPC MMU uses a hash table containing PTEs, together with
- * a set of 16 segment registers (on 32-bit implementations), to define
- * the virtual to physical address mapping.
- *
- * We use the hash table as an extended TLB, i.e. a cache of currently
- * active mappings.  We maintain a two-level page table tree, much
- * like that used by the i386, for the sake of the Linux memory
- * management code.  Low-level assembler code in hashtable.S
- * (procedure hash_page) is responsible for extracting ptes from the
- * tree and putting them into the hash table when necessary, and
- * updating the accessed and modified bits in the page table tree.
- */
-
-/*
- * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
- * We also use the two level tables, but we can put the real bits in them
- * needed for the TLB and tablewalk.  These definitions require Mx_CTR.PPM = 0,
- * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1.  The level 2 descriptor has
- * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
- * based upon user/super access.  The TLB does not have accessed nor write
- * protect.  We assume that if the TLB get loaded with an entry it is
- * accessed, and overload the changed bit for write protect.  We use
- * two bits in the software pte that are supposed to be set to zero in
- * the TLB entry (24 and 25) for these indicators.  Although the level 1
- * descriptor contains the guarded and writethrough/copyback bits, we can
- * set these at the page level since they get copied from the Mx_TWC
- * register when the TLB entry is loaded.  We will use bit 27 for guard, since
- * that is where it exists in the MD_TWC, and bit 26 for writethrough.
- * These will get masked from the level 2 descriptor at TLB load time, and
- * copied to the MD_TWC before it gets loaded.
- * Large page sizes added.  We currently support two sizes, 4K and 8M.
- * This also allows a TLB hander optimization because we can directly
- * load the PMD into MD_TWC.  The 8M pages are only used for kernel
- * mapping of well known areas.  The PMD (PGD) entries contain control
- * flags in addition to the address, so care must be taken that the
- * software no longer assumes these are only pointers.
- */
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully-associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively (see "mmu.h" for definitions).
- */
-
-/*
- * The normal case is that PTEs are 32-bits and we have a 1-page
- * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
- *
- * For any >32-bit physical address platform, we can use the following
- * two level page table layout where the pgdir is 8KB and the MS 13 bits
- * are an index to the second level table.  The combined pgdir/pmd first
- * level has 2048 entries and the second level has 512 64-bit PTE entries.
- * -Matt
- */
-/* PGDIR_SHIFT determines what a top-level page table entry can map */
-#define PGDIR_SHIFT     (PAGE_SHIFT + PTE_SHIFT)
-#define PGDIR_SIZE      (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK      (~(PGDIR_SIZE-1))
-
-/*
- * entries per page directory level: our page-table tree is two-level, so
- * we don't really have any PMD directory.
- */
-#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE  (sizeof(pte_t) << PTE_SHIFT)
-#define PGD_TABLE_SIZE  (sizeof(pgd_t) << (32 - PGDIR_SHIFT))
-#endif  /* __ASSEMBLY__ */
-
-#define PTRS_PER_PTE    (1 << PTE_SHIFT)
-#define PTRS_PER_PMD    1
-#define PTRS_PER_PGD    (1 << (32 - PGDIR_SHIFT))
-
-#define USER_PTRS_PER_PGD       (TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS      0
-
-#define pte_ERROR(e) \
-        printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
-                (unsigned long long)pte_val(e))
-#define pgd_ERROR(e) \
-        printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- *
- * We no longer map larger than phys RAM with the BATs so we don't have
- * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
- * about clashes between our early calls to ioremap() that start growing down
- * from ioremap_base being run into the VM area allocations (growing upwards
- * from VMALLOC_START).  For this reason we have ioremap_bot to check when
- * we actually run into our mappings setup in the early boot with the VM
- * system.  This really does become a problem for machines with good amounts
- * of RAM.  -- Cort
- */
-#define VMALLOC_OFFSET (0x1000000) /* 16M */
-#ifdef PPC_PIN_SIZE
-#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
-#else
-#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
-#endif
-#define VMALLOC_END     ioremap_bot
-
-/*
- * Bits in a linux-style PTE.  These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible.
- */
-
-#if defined(CONFIG_40x)
-
-/* There are several potential gotchas here.  The 40x hardware TLBLO
-   field looks like this:
-
-   0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
-   RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
-
-   Where possible we make the Linux PTE bits match up with this
-
-   - bits 20 and 21 must be cleared, because we use 4k pages (40x can
-     support down to 1k pages), this is done in the TLBMiss exception
-     handler.
-   - We use only zones 0 (for kernel pages) and 1 (for user pages)
-     of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
-     miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
-     zone.
-   - PRESENT *must* be in the bottom two bits because swap cache
-     entries use the top 30 bits.  Because 40x doesn't support SMP
-     anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
-     is cleared in the TLB miss handler before the TLB entry is loaded.
-   - All other bits of the PTE are loaded into TLBLO without
-     modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
-     software PTE bits.  We actually use use bits 21, 24, 25, and
-     30 respectively for the software bits: ACCESSED, DIRTY, RW, and
-     PRESENT.
-*/
-
-/* Definitions for 40x embedded chips. */
-#define _PAGE_GUARDED   0x001   /* G: page is guarded from prefetch */
-#define _PAGE_FILE      0x001   /* when !present: nonlinear file mapping */
-#define _PAGE_PRESENT   0x002   /* software: PTE contains a translation */
-#define _PAGE_NO_CACHE  0x004   /* I: caching is inhibited */
-#define _PAGE_WRITETHRU 0x008   /* W: caching is write-through */
-#define _PAGE_USER      0x010   /* matches one of the zone permission bits */
-#define _PAGE_RW        0x040   /* software: Writes permitted */
-#define _PAGE_DIRTY     0x080   /* software: dirty page */
-#define _PAGE_HWWRITE   0x100   /* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC    0x200   /* hardware: EX permission */
-#define _PAGE_ACCESSED  0x400   /* software: R: page referenced */
-
-#define _PMD_PRESENT    0x400   /* PMD points to page of PTEs */
-#define _PMD_BAD        0x802
-#define _PMD_SIZE       0x0e0   /* size field, != 0 for large-page PMD entry */
-#define _PMD_SIZE_4M    0x0c0
-#define _PMD_SIZE_16M   0x0e0
-#define PMD_PAGE_SIZE(pmdval)   (1024 << (((pmdval) & _PMD_SIZE) >> 4))
-
-/* Until my rework is finished, 40x still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES      1
-
-#elif defined(CONFIG_44x)
-/*
- * Definitions for PPC440
- *
- * Because of the 3 word TLB entries to support 36-bit addressing,
- * the attribute are difficult to map in such a fashion that they
- * are easily loaded during exception processing.  I decided to
- * organize the entry so the ERPN is the only portion in the
- * upper word of the PTE and the attribute bits below are packed
- * in as sensibly as they can be in the area below a 4KB page size
- * oriented RPN.  This at least makes it easy to load the RPN and
- * ERPN fields in the TLB. -Matt
- *
- * Note that these bits preclude future use of a page size
- * less than 4KB.
- *
- *
- * PPC 440 core has following TLB attribute fields;
- *
- *   TLB1:
- *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- *   RPN.................................  -  -  -  -  -  - ERPN.......
- *
- *   TLB2:
- *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- *   -  -  -  -  -    - U0 U1 U2 U3 W  I  M  G  E   - UX UW UR SX SW SR
- *
- * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
- * TLB2 storage attibute fields. Those are:
- *
- *   TLB2:
- *   0...10    11   12   13   14   15   16...31
- *   no change WL1  IL1I IL1D IL2I IL2D no change
- *
- * There are some constrains and options, to decide mapping software bits
- * into TLB entry.
- *
- *   - PRESENT *must* be in the bottom three bits because swap cache
- *     entries use the top 29 bits for TLB2.
- *
- *   - FILE *must* be in the bottom three bits because swap cache
- *     entries use the top 29 bits for TLB2.
- *
- *   - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
- *     doesn't support SMP. So we can use this as software bit, like
- *     DIRTY.
- *
- * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
- * for memory protection related functions (see PTE structure in
- * include/asm-ppc/mmu.h).  The _PAGE_XXX definitions in this file map to the
- * above bits.  Note that the bit values are CPU specific, not architecture
- * specific.
- *
- * The kernel PTE entry holds an arch-dependent swp_entry structure under
- * certain situations. In other words, in such situations some portion of
- * the PTE bits are used as a swp_entry. In the PPC implementation, the
- * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
- * hold protection values. That means the three protection bits are
- * reserved for both PTE and SWAP entry at the most significant three
- * LSBs.
- *
- * There are three protection bits available for SWAP entry:
- *      _PAGE_PRESENT
- *      _PAGE_FILE
- *      _PAGE_HASHPTE (if HW has)
- *
- * So those three bits have to be inside of 0-2nd LSB of PTE.
- *
- */
-
-#define _PAGE_PRESENT   0x00000001              /* S: PTE valid */
-#define _PAGE_RW        0x00000002              /* S: Write permission */
-#define _PAGE_FILE      0x00000004              /* S: nonlinear file mapping */
-#define _PAGE_HWEXEC    0x00000004              /* H: Execute permission */
-#define _PAGE_ACCESSED  0x00000008              /* S: Page referenced */
-#define _PAGE_DIRTY     0x00000010              /* S: Page dirty */
-#define _PAGE_USER      0x00000040              /* S: User page */
-#define _PAGE_ENDIAN    0x00000080              /* H: E bit */
-#define _PAGE_GUARDED   0x00000100              /* H: G bit */
-#define _PAGE_COHERENT  0x00000200              /* H: M bit */
-#define _PAGE_NO_CACHE  0x00000400              /* H: I bit */
-#define _PAGE_WRITETHRU 0x00000800              /* H: W bit */
-
-/* TODO: Add large page lowmem mapping support */
-#define _PMD_PRESENT    0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD        (~PAGE_MASK)
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK  0xffffffff00000000ULL
-
-
-#elif defined(CONFIG_FSL_BOOKE)
-/*
-   MMU Assist Register 3:
-
-   32 33 34 35 36  ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
-   RPN......................  0  0 U0 U1 U2 U3 UX SX UW SW UR SR
-
-   - PRESENT *must* be in the bottom three bits because swap cache
-     entries use the top 29 bits.
-
-   - FILE *must* be in the bottom three bits because swap cache
-     entries use the top 29 bits.
-*/
-
-/* Definitions for FSL Book-E Cores */
-#define _PAGE_PRESENT   0x00001 /* S: PTE contains a translation */
-#define _PAGE_USER      0x00002 /* S: User page (maps to UR) */
-#define _PAGE_FILE      0x00002 /* S: when !present: nonlinear file mapping */
-#define _PAGE_RW        0x00004 /* S: Write permission (SW) */
-#define _PAGE_DIRTY     0x00008 /* S: Page dirty */
-#define _PAGE_HWEXEC    0x00010 /* H: SX permission */
-#define _PAGE_ACCESSED  0x00020 /* S: Page referenced */
-
-#define _PAGE_ENDIAN    0x00040 /* H: E bit */
-#define _PAGE_GUARDED   0x00080 /* H: G bit */
-#define _PAGE_COHERENT  0x00100 /* H: M bit */
-#define _PAGE_NO_CACHE  0x00200 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
-
-#ifdef CONFIG_PTE_64BIT
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK  0xffffffffffff0000ULL
-#endif
-
-#define _PMD_PRESENT    0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD        (~PAGE_MASK)
-
-#elif defined(CONFIG_8xx)
-/* Definitions for 8xx embedded chips. */
-#define _PAGE_PRESENT   0x0001  /* Page is valid */
-#define _PAGE_FILE      0x0002  /* when !present: nonlinear file mapping */
-#define _PAGE_NO_CACHE  0x0002  /* I: cache inhibit */
-#define _PAGE_SHARED    0x0004  /* No ASID (context) compare */
-
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
- */
-#define _PAGE_EXEC      0x0008  /* software: i-cache coherency required */
-#define _PAGE_GUARDED   0x0010  /* software: guarded access */
-#define _PAGE_DIRTY     0x0020  /* software: page changed */
-#define _PAGE_RW        0x0040  /* software: user write access allowed */
-#define _PAGE_ACCESSED  0x0080  /* software: page referenced */
-
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change.  It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_HWWRITE   0x0100  /* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER      0x0800  /* One of the PP bits, the other is USER&~RW */
-
-#define _PMD_PRESENT    0x0001
-#define _PMD_BAD        0x0ff0
-#define _PMD_PAGE_MASK  0x000c
-#define _PMD_PAGE_8M    0x000c
-
-#define _PTE_NONE_MASK _PAGE_ACCESSED
-
-/* Until my rework is finished, 8xx still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES      1
-
-#else /* CONFIG_6xx */
-/* Definitions for 60x, 740/750, etc. */
-#define _PAGE_PRESENT   0x001   /* software: pte contains a translation */
-#define _PAGE_HASHPTE   0x002   /* hash_page has made an HPTE for this pte */
-#define _PAGE_FILE      0x004   /* when !present: nonlinear file mapping */
-#define _PAGE_USER      0x004   /* usermode access allowed */
-#define _PAGE_GUARDED   0x008   /* G: prohibit speculative access */
-#define _PAGE_COHERENT  0x010   /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE  0x020   /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x040   /* W: cache write-through */
-#define _PAGE_DIRTY     0x080   /* C: page changed */
-#define _PAGE_ACCESSED  0x100   /* R: page referenced */
-#define _PAGE_EXEC      0x200   /* software: i-cache coherency required */
-#define _PAGE_RW        0x400   /* software: user write access allowed */
-
-#define _PTE_NONE_MASK  _PAGE_HASHPTE
-
-#define _PMD_PRESENT    0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD        (~PAGE_MASK)
-
-/* Hash table based platforms need atomic updates of the linux PTE */
-#define PTE_ATOMIC_UPDATES      1
-
-#endif
-
-/*
- * Some bits are only used on some cpu families...
- */
-#ifndef _PAGE_HASHPTE
-#define _PAGE_HASHPTE   0
-#endif
-#ifndef _PTE_NONE_MASK
-#define _PTE_NONE_MASK 0
-#endif
-#ifndef _PAGE_SHARED
-#define _PAGE_SHARED    0
-#endif
-#ifndef _PAGE_HWWRITE
-#define _PAGE_HWWRITE   0
-#endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC    0
-#endif
-#ifndef _PAGE_EXEC
-#define _PAGE_EXEC      0
-#endif
-#ifndef _PAGE_ENDIAN
-#define _PAGE_ENDIAN    0
-#endif
-#ifndef _PAGE_COHERENT
-#define _PAGE_COHERENT  0
-#endif
-#ifndef _PAGE_WRITETHRU
-#define _PAGE_WRITETHRU 0
-#endif
-#ifndef _PMD_PRESENT_MASK
-#define _PMD_PRESENT_MASK       _PMD_PRESENT
-#endif
-#ifndef _PMD_SIZE
-#define _PMD_SIZE       0
-#define PMD_PAGE_SIZE(pmd)      bad_call_to_PMD_PAGE_SIZE()
-#endif
-
-#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-
-#define PAGE_PROT_BITS  __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
-                                 _PAGE_WRITETHRU | _PAGE_ENDIAN | \
-                                 _PAGE_USER | _PAGE_ACCESSED | \
-                                 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
-                                 _PAGE_EXEC | _PAGE_HWEXEC)
-/*
- * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
- * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
- * to have it in the Linux PTE, and in fact the bit could be reused for
- * another purpose.  -- paulus.
- */
-
-#ifdef CONFIG_44x
-#define _PAGE_BASE      (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
-#else
-#define _PAGE_BASE      (_PAGE_PRESENT | _PAGE_ACCESSED)
-#endif
-#define _PAGE_WRENABLE  (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
-#define _PAGE_KERNEL    (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
-
-#ifdef CONFIG_PPC_STD_MMU
-/* On standard PPC MMU, no user access implies kernel read/write access,
- * so to write-protect kernel memory we must turn on user access */
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
-#else
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
-#endif
-
-#define _PAGE_IO        (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define _PAGE_RAM       (_PAGE_KERNEL | _PAGE_HWEXEC)
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
-        defined(CONFIG_KPROBES)
-/* We want the debuggers to be able to set breakpoints anywhere, so
- * don't write protect the kernel text */
-#define _PAGE_RAM_TEXT  _PAGE_RAM
-#else
-#define _PAGE_RAM_TEXT  (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
-#endif
-
-#define PAGE_NONE       __pgprot(_PAGE_BASE)
-#define PAGE_READONLY   __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_SHARED     __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
-#define PAGE_SHARED_X   __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
-#define PAGE_COPY       __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X     __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-
-#define PAGE_KERNEL             __pgprot(_PAGE_RAM)
-#define PAGE_KERNEL_NOCACHE     __pgprot(_PAGE_IO)
-
-/*
- * The PowerPC can only do execute protection on a segment (256MB) basis,
- * not on a page basis.  So we consider execute permission the same as read.
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- */
-#define __P000  PAGE_NONE
-#define __P001  PAGE_READONLY_X
-#define __P010  PAGE_COPY
-#define __P011  PAGE_COPY_X
-#define __P100  PAGE_READONLY
-#define __P101  PAGE_READONLY_X
-#define __P110  PAGE_COPY
-#define __P111  PAGE_COPY_X
-
-#define __S000  PAGE_NONE
-#define __S001  PAGE_READONLY_X
-#define __S010  PAGE_SHARED
-#define __S011  PAGE_SHARED_X
-#define __S100  PAGE_READONLY
-#define __S101  PAGE_READONLY_X
-#define __S110  PAGE_SHARED
-#define __S111  PAGE_SHARED_X
-
-#ifndef __ASSEMBLY__
-/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
- * kernel without large page PMD support */
-extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
-
-/*
- * Conversions between PTE values and page frame numbers.
- */
-
-/* in some case we want to additionaly adjust where the pfn is in the pte to
- * allow room for more flags */
-#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
-#define PFN_SHIFT_OFFSET        (PAGE_SHIFT + 8)
-#else
-#define PFN_SHIFT_OFFSET        (PAGE_SHIFT)
-#endif
-
-#define pte_pfn(x)              (pte_val(x) >> PFN_SHIFT_OFFSET)
-#define pte_page(x)             pfn_to_page(pte_pfn(x))
-
-#define pfn_pte(pfn, prot)      __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
-                                        pgprot_val(prot))
-#define mk_pte(page, prot)      pfn_pte(page_to_pfn(page), prot)
-#endif /* __ASSEMBLY__ */
-
-#define pte_none(pte)           ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
-#define pte_present(pte)        (pte_val(pte) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
-
-#define pmd_none(pmd)           (!pmd_val(pmd))
-#define pmd_bad(pmd)            (pmd_val(pmd) & _PMD_BAD)
-#define pmd_present(pmd)        (pmd_val(pmd) & _PMD_PRESENT_MASK)
-#define pmd_clear(pmdp)         do { pmd_val(*(pmdp)) = 0; } while (0)
-
-#ifndef __ASSEMBLY__
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte)          { return pte_val(pte) & _PAGE_RW; }
-static inline int pte_dirty(pte_t pte)          { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte)          { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte)           { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte)        { return 0; }
-
-static inline void pte_uncache(pte_t pte)       { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte)         { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
-        pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
-        pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
-        pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-
-static inline pte_t pte_mkwrite(pte_t pte) {
-        pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
-        pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
-        pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
-        return pte; }
-static inline unsigned long pte_pgprot(pte_t pte)
-{
-        return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
-}
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-        pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
-        return pte;
-}
-
-/*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_pages(unsigned context, unsigned long va,
-                            unsigned long pmdval, int count);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va,
-                          unsigned long pmdval);
-
-/*
- * Atomic PTE updates.
- *
- * pte_update clears and sets bit atomically, and returns
- * the old pte value.  In the 64-bit PTE case we lock around the
- * low PTE word since we expect ALL flag bits to be there
- */
-#ifndef CONFIG_PTE_64BIT
-static inline unsigned long pte_update(pte_t *p,
-                                       unsigned long clr,
-                                       unsigned long set)
-{
-#ifdef PTE_ATOMIC_UPDATES
-        unsigned long old, tmp;
-
-        __asm__ __volatile__("\
-1:      lwarx   %0,0,%3\n\
-        andc    %1,%0,%4\n\
-        or      %1,%1,%5\n"
-        PPC405_ERR77(0,%3)
-"       stwcx.  %1,0,%3\n\
-        bne-    1b"
-        : "=&r" (old), "=&r" (tmp), "=m" (*p)
-        : "r" (p), "r" (clr), "r" (set), "m" (*p)
-        : "cc" );
-#else /* PTE_ATOMIC_UPDATES */
-        unsigned long old = pte_val(*p);
-        *p = __pte((old & ~clr) | set);
-#endif /* !PTE_ATOMIC_UPDATES */
-
-#ifdef CONFIG_44x
-        if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
-                icache_44x_need_flush = 1;
-#endif
-        return old;
-}
-#else /* CONFIG_PTE_64BIT */
-/* TODO: Change that to only modify the low word and move set_pte_at()
- * out of line
- */
-static inline unsigned long long pte_update(pte_t *p,
-                                            unsigned long clr,
-                                            unsigned long set)
-{
-#ifdef PTE_ATOMIC_UPDATES
-        unsigned long long old;
-        unsigned long tmp;
-
-        __asm__ __volatile__("\
-1:      lwarx   %L0,0,%4\n\
-        lwzx    %0,0,%3\n\
-        andc    %1,%L0,%5\n\
-        or      %1,%1,%6\n"
-        PPC405_ERR77(0,%3)
-"       stwcx.  %1,0,%4\n\
-        bne-    1b"
-        : "=&r" (old), "=&r" (tmp), "=m" (*p)
-        : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
-        : "cc" );
-#else /* PTE_ATOMIC_UPDATES */
-        unsigned long long old = pte_val(*p);
-        *p = __pte((old & ~(unsigned long long)clr) | set);
-#endif /* !PTE_ATOMIC_UPDATES */
-
-#ifdef CONFIG_44x
-        if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
-                icache_44x_need_flush = 1;
-#endif
-        return old;
-}
-#endif /* CONFIG_PTE_64BIT */
-
-/*
- * set_pte stores a linux PTE into the linux page table.
- * On machines which use an MMU hash table we avoid changing the
- * _PAGE_HASHPTE bit.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-                              pte_t *ptep, pte_t pte)
-{
-#if _PAGE_HASHPTE != 0
-        pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
-#else
-        *ptep = pte;
-#endif
-}
-
-/*
- * 2.6 calls this without flushing the TLB entry; this is wrong
- * for our hash-based implementation, we fix that up here.
- */
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
-{
-        unsigned long old;
-        old = pte_update(ptep, _PAGE_ACCESSED, 0);
-#if _PAGE_HASHPTE != 0
-        if (old & _PAGE_HASHPTE) {
-                unsigned long ptephys = __pa(ptep) & PAGE_MASK;
-                flush_hash_pages(context, addr, ptephys, 1);
-        }
-#endif
-        return (old & _PAGE_ACCESSED) != 0;
-}
-#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
-        __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-                                       pte_t *ptep)
-{
-        return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
-}
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
-                                      pte_t *ptep)
-{
-        pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
-}
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-                                           unsigned long addr, pte_t *ptep)
-{
-        ptep_set_wrprotect(mm, addr, ptep);
-}
-
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
-{
-        unsigned long bits = pte_val(entry) &
-                (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
-        pte_update(ptep, 0, bits);
-}
-
-#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({                                                                         \
-        int __changed = !pte_same(*(__ptep), __entry);                     \
-        if (__changed) {                                                   \
-                __ptep_set_access_flags(__ptep, __entry, __dirty);         \
-                flush_tlb_page_nohash(__vma, __address);                   \
-        }                                                                  \
-        __changed;                                                         \
-})
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot)  (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-                                     unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-#define __HAVE_ARCH_PTE_SAME
-#define pte_same(A,B)   (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
-
-/*
- * Note that on Book E processors, the pmd contains the kernel virtual
- * (lowmem) address of the pte page.  The physical address is less useful
- * because everything runs with translation enabled (even the TLB miss
- * handler).  On everything else the pmd contains the physical address
- * of the pte page.  -- paulus
- */
-#ifndef CONFIG_BOOKE
-#define pmd_page_vaddr(pmd)     \
-        ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd)           \
-        (mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
-#else
-#define pmd_page_vaddr(pmd)     \
-        ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd)           \
-        pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
-#endif
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* to find an entry in a page-table-directory */
-#define pgd_index(address)       ((address) >> PGDIR_SHIFT)
-#define pgd_offset(mm, address)  ((mm)->pgd + pgd_index(address))
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(address)              \
-        (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, addr)    \
-        ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
-#define pte_offset_map(dir, addr)               \
-        ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
-#define pte_offset_map_nested(dir, addr)        \
-        ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
-
-#define pte_unmap(pte)          kunmap_atomic(pte, KM_PTE0)
-#define pte_unmap_nested(pte)   kunmap_atomic(pte, KM_PTE1)
-
-/*
- * Encode and decode a swap entry.
- * Note that the bits we use in a PTE for representing a swap entry
- * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
- *_PAGE_HASHPTE bit (if used).  -- paulus
- */
-#define __swp_type(entry)               ((entry).val & 0x1f)
-#define __swp_offset(entry)             ((entry).val >> 5)
-#define __swp_entry(type, offset)       ((swp_entry_t) { (type) | ((offset) << 5) })
-#define __pte_to_swp_entry(pte)         ((swp_entry_t) { pte_val(pte) >> 3 })
-#define __swp_entry_to_pte(x)           ((pte_t) { (x).val << 3 })
-
-/* Encode and decode a nonlinear file mapping entry */
-#define PTE_FILE_MAX_BITS       29
-#define pte_to_pgoff(pte)       (pte_val(pte) >> 3)
-#define pgoff_to_pte(off)       ((pte_t) { ((off) << 3) | _PAGE_FILE })
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()    do { } while (0)
-
-extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
-                      pmd_t **pmdp);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
deleted file mode 100644
index 74c6f380b805..000000000000
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ /dev/null
@@ -1,468 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_
-#define _ASM_POWERPC_PGTABLE_PPC64_H_
-/*
- * This file contains the functions and defines necessary to modify and use
- * the ppc64 hashed page table.
- */
-
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <asm/tlbflush.h>
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pgtable-64k.h>
-#else
-#include <asm/pgtable-4k.h>
-#endif
-
-#define FIRST_USER_ADDRESS      0
-
-/*
- * Size of EA range mapped by our pagetables.
- */
-#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
-                            PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
-#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
-
-#if TASK_SIZE_USER64 > PGTABLE_RANGE
-#error TASK_SIZE_USER64 exceeds pagetable range
-#endif
-
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
-#error TASK_SIZE_USER64 exceeds user VSID range
-#endif
-
-
-/*
- * Define the address range of the vmalloc VM area.
- */
-#define VMALLOC_START ASM_CONST(0xD000000000000000)
-#define VMALLOC_SIZE  (PGTABLE_RANGE >> 1)
-#define VMALLOC_END   (VMALLOC_START + VMALLOC_SIZE)
-
-/*
- * Define the address ranges for MMIO and IO space :
- *
- *  ISA_IO_BASE = VMALLOC_END, 64K reserved area
- *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
- * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
- */
-#define FULL_IO_SIZE    0x80000000ul
-#define  ISA_IO_BASE    (VMALLOC_END)
-#define  ISA_IO_END     (VMALLOC_END + 0x10000ul)
-#define  PHB_IO_BASE    (ISA_IO_END)
-#define  PHB_IO_END     (VMALLOC_END + FULL_IO_SIZE)
-#define IOREMAP_BASE    (PHB_IO_END)
-#define IOREMAP_END     (VMALLOC_START + PGTABLE_RANGE)
-
-/*
- * Region IDs
- */
-#define REGION_SHIFT            60UL
-#define REGION_MASK             (0xfUL << REGION_SHIFT)
-#define REGION_ID(ea)           (((unsigned long)(ea)) >> REGION_SHIFT)
-
-#define VMALLOC_REGION_ID       (REGION_ID(VMALLOC_START))
-#define KERNEL_REGION_ID        (REGION_ID(PAGE_OFFSET))
-#define VMEMMAP_REGION_ID       (0xfUL)
-#define USER_REGION_ID          (0UL)
-
-/*
- * Defines the address of the vmemap area, in its own region
- */
-#define VMEMMAP_BASE            (VMEMMAP_REGION_ID << REGION_SHIFT)
-#define vmemmap                 ((struct page *)VMEMMAP_BASE)
-
-
-/*
- * Common bits in a linux-style PTE.  These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible. Additional
- * bits may be defined in pgtable-*.h
- */
-#define _PAGE_PRESENT   0x0001 /* software: pte contains a translation */
-#define _PAGE_USER      0x0002 /* matches one of the PP bits */
-#define _PAGE_FILE      0x0002 /* (!present only) software: pte holds file offset */
-#define _PAGE_EXEC      0x0004 /* No execute on POWER4 and newer (we invert) */
-#define _PAGE_GUARDED   0x0008
-#define _PAGE_COHERENT  0x0010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE  0x0020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */
-#define _PAGE_DIRTY     0x0080 /* C: page changed */
-#define _PAGE_ACCESSED  0x0100 /* R: page referenced */
-#define _PAGE_RW        0x0200 /* software: user write access allowed */
-#define _PAGE_BUSY      0x0800 /* software: PTE & hash are busy */
-
-/* Strong Access Ordering */
-#define _PAGE_SAO       (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
-
-#define _PAGE_BASE      (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
-
-#define _PAGE_WRENABLE  (_PAGE_RW | _PAGE_DIRTY)
-
-/* __pgprot defined in asm-powerpc/page.h */
-#define PAGE_NONE       __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
-
-#define PAGE_SHARED     __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
-#define PAGE_SHARED_X   __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_COPY       __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X     __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_READONLY   __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_KERNEL     __pgprot(_PAGE_BASE | _PAGE_WRENABLE)
-#define PAGE_KERNEL_CI  __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-                               _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
-
-#define PAGE_AGP        __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
-#define HAVE_PAGE_AGP
-
-#define PAGE_PROT_BITS  __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \
-                                 _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
-                                 _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
-                                 _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
-/* PTEIDX nibble */
-#define _PTEIDX_SECONDARY       0x8
-#define _PTEIDX_GROUP_IX        0x7
-
-
-/*
- * POWER4 and newer have per page execute protection, older chips can only
- * do this on a segment (256MB) basis.
- *
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- *
- * Note due to the way vm flags are laid out, the bits are XWR
- */
-#define __P000  PAGE_NONE
-#define __P001  PAGE_READONLY
-#define __P010  PAGE_COPY
-#define __P011  PAGE_COPY
-#define __P100  PAGE_READONLY_X
-#define __P101  PAGE_READONLY_X
-#define __P110  PAGE_COPY_X
-#define __P111  PAGE_COPY_X
-
-#define __S000  PAGE_NONE
-#define __S001  PAGE_READONLY
-#define __S010  PAGE_SHARED
-#define __S011  PAGE_SHARED
-#define __S100  PAGE_READONLY_X
-#define __S101  PAGE_READONLY_X
-#define __S110  PAGE_SHARED_X
-#define __S111  PAGE_SHARED_X
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * mk_pte takes a (struct page *) as input
- */
-#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
-{
-        pte_t pte;
-
-
-        pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot);
-        return pte;
-}
-
-#define pte_modify(_pte, newprot) \
-  (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
-
-#define pte_none(pte)           ((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
-#define pte_present(pte)        (pte_val(pte) & _PAGE_PRESENT)
-
-/* pte_clear moved to later in this file */
-
-#define pte_pfn(x)              ((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT)))
-#define pte_page(x)             pfn_to_page(pte_pfn(x))
-
-#define PMD_BAD_BITS            (PTE_TABLE_SIZE-1)
-#define PUD_BAD_BITS            (PMD_TABLE_SIZE-1)
-
-#define pmd_set(pmdp, pmdval)   (pmd_val(*(pmdp)) = (pmdval))
-#define pmd_none(pmd)           (!pmd_val(pmd))
-#define pmd_bad(pmd)            (!is_kernel_addr(pmd_val(pmd)) \
-                                 || (pmd_val(pmd) & PMD_BAD_BITS))
-#define pmd_present(pmd)        (pmd_val(pmd) != 0)
-#define pmd_clear(pmdp)         (pmd_val(*(pmdp)) = 0)
-#define pmd_page_vaddr(pmd)     (pmd_val(pmd) & ~PMD_MASKED_BITS)
-#define pmd_page(pmd)           virt_to_page(pmd_page_vaddr(pmd))
-
-#define pud_set(pudp, pudval)   (pud_val(*(pudp)) = (pudval))
-#define pud_none(pud)           (!pud_val(pud))
-#define pud_bad(pud)            (!is_kernel_addr(pud_val(pud)) \
-                                 || (pud_val(pud) & PUD_BAD_BITS))
-#define pud_present(pud)        (pud_val(pud) != 0)
-#define pud_clear(pudp)         (pud_val(*(pudp)) = 0)
-#define pud_page_vaddr(pud)     (pud_val(pud) & ~PUD_MASKED_BITS)
-#define pud_page(pud)           virt_to_page(pud_page_vaddr(pud))
-
-#define pgd_set(pgdp, pudp)     ({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
-
-/*
- * Find an entry in a page-table-directory.  We combine the address region
- * (the high order N bits) and the pgd portion of the address.
- */
-/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
-#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff)
-
-#define pgd_offset(mm, address)  ((mm)->pgd + pgd_index(address))
-
-#define pmd_offset(pudp,addr) \
-  (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
-
-#define pte_offset_kernel(dir,addr) \
-  (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
-
-#define pte_offset_map(dir,addr)        pte_offset_kernel((dir), (addr))
-#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir), (addr))
-#define pte_unmap(pte)                  do { } while(0)
-#define pte_unmap_nested(pte)           do { } while(0)
-
-/* to find an entry in a kernel page-table-directory */
-/* This now only contains the vmalloc pages */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
-static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
-
-static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
-        pte_val(pte) &= ~(_PAGE_RW); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
-        pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
-        pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) {
-        pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
-        pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
-        pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkhuge(pte_t pte) {
-        return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
-        pte_val(pte) |= _PAGE_SPECIAL; return pte; }
-static inline unsigned long pte_pgprot(pte_t pte)
-{
-        return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
-}
-
-/* Atomic PTE updates */
-static inline unsigned long pte_update(struct mm_struct *mm,
-                                       unsigned long addr,
-                                       pte_t *ptep, unsigned long clr,
-                                       int huge)
-{
-        unsigned long old, tmp;
-
-        __asm__ __volatile__(
-        "1:     ldarx   %0,0,%3         # pte_update\n\
-        andi.   %1,%0,%6\n\
-        bne-    1b \n\
-        andc    %1,%0,%4 \n\
-        stdcx.  %1,0,%3 \n\
-        bne-    1b"
-        : "=&r" (old), "=&r" (tmp), "=m" (*ptep)
-        : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
-        : "cc" );
-
-        if (old & _PAGE_HASHPTE)
-                hpte_need_flush(mm, addr, ptep, old, huge);
-        return old;
-}
-
-static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
-                                              unsigned long addr, pte_t *ptep)
-{
-        unsigned long old;
-
-        if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
-                return 0;
-        old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
-        return (old & _PAGE_ACCESSED) != 0;
-}
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define ptep_test_and_clear_young(__vma, __addr, __ptep)                   \
-({                                                                         \
-        int __r;                                                           \
-        __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
-        __r;                                                               \
-})
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
-                                      pte_t *ptep)
-{
-        unsigned long old;
-
-        if ((pte_val(*ptep) & _PAGE_RW) == 0)
-                return;
-        old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
-}
-
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-                                           unsigned long addr, pte_t *ptep)
-{
-        unsigned long old;
-
-        if ((pte_val(*ptep) & _PAGE_RW) == 0)
-                return;
-        old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
-}
-
-/*
- * We currently remove entries from the hashtable regardless of whether
- * the entry was young or dirty. The generic routines only flush if the
- * entry was young or dirty which is not good enough.
- *
- * We should be more intelligent about this but for the moment we override
- * these functions and force a tlb flush unconditionally
- */
-#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-#define ptep_clear_flush_young(__vma, __address, __ptep)                \
-({                                                                      \
-        int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
-                                                  __ptep);              \
-        __young;                                                        \
-})
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
-                                       unsigned long addr, pte_t *ptep)
-{
-        unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
-        return __pte(old);
-}
-
-static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
-                             pte_t * ptep)
-{
-        pte_update(mm, addr, ptep, ~0UL, 0);
-}
-
-/*
- * set_pte stores a linux PTE into the linux page table.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-                              pte_t *ptep, pte_t pte)
-{
-        if (pte_present(*ptep))
-                pte_clear(mm, addr, ptep);
-        pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
-        *ptep = pte;
-}
-
-/* Set the dirty and/or accessed bits atomically in a linux PTE, this
- * function doesn't need to flush the hash entry
- */
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
-{
-        unsigned long bits = pte_val(entry) &
-                (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
-        unsigned long old, tmp;
-
-        __asm__ __volatile__(
-        "1:     ldarx   %0,0,%4\n\
-                andi.   %1,%0,%6\n\
-                bne-    1b \n\
-                or      %0,%3,%0\n\
-                stdcx.  %0,0,%4\n\
-                bne-    1b"
-        :"=&r" (old), "=&r" (tmp), "=m" (*ptep)
-        :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
-        :"cc");
-}
-#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({                                                                         \
-        int __changed = !pte_same(*(__ptep), __entry);                     \
-        if (__changed) {                                                   \
-                __ptep_set_access_flags(__ptep, __entry, __dirty);         \
-                flush_tlb_page_nohash(__vma, __address);                   \
-        }                                                                  \
-        __changed;                                                         \
-})
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot)  (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-                                     unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-#define __HAVE_ARCH_PTE_SAME
-#define pte_same(A,B)   (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
-
-#define pte_ERROR(e) \
-        printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
-        printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
-        printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/* Encode and de-code a swap entry */
-#define __swp_type(entry)       (((entry).val >> 1) & 0x3f)
-#define __swp_offset(entry)     ((entry).val >> 8)
-#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)})
-#define __pte_to_swp_entry(pte) ((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT})
-#define __swp_entry_to_pte(x)   ((pte_t) { (x).val << PTE_RPN_SHIFT })
-#define pte_to_pgoff(pte)       (pte_val(pte) >> PTE_RPN_SHIFT)
-#define pgoff_to_pte(off)       ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
-#define PTE_FILE_MAX_BITS       (BITS_PER_LONG - PTE_RPN_SHIFT)
-
-void pgtable_cache_init(void);
-
-/*
- * find_linux_pte returns the address of a linux pte for a given
- * effective address and directory.  If not found, it returns zero.
- */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea)
-{
-        pgd_t *pg;
-        pud_t *pu;
-        pmd_t *pm;
-        pte_t *pt = NULL;
-
-        pg = pgdir + pgd_index(ea);
-        if (!pgd_none(*pg)) {
-                pu = pud_offset(pg, ea);
-                if (!pud_none(*pu)) {
-                        pm = pmd_offset(pu, ea);
-                        if (pmd_present(*pm))
-                                pt = pte_offset_kernel(pm, ea);
-                }
-        }
-        return pt;
-}
-
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/include/asm-powerpc/pgtable.h b/include/asm-powerpc/pgtable.h
deleted file mode 100644
index dbb8ca172e44..000000000000
--- a/include/asm-powerpc/pgtable.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_H
-#define _ASM_POWERPC_PGTABLE_H
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>              /* For TASK_SIZE */
-#include <asm/mmu.h>
-#include <asm/page.h>
-struct mm_struct;
-#endif /* !__ASSEMBLY__ */
-
-#if defined(CONFIG_PPC64)
-#  include <asm/pgtable-ppc64.h>
-#else
-#  include <asm/pgtable-ppc32.h>
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-extern pgd_t swapper_pg_dir[];
-
-extern void paging_init(void);
-
-/*
- * kern_addr_valid is intended to indicate whether an address is a valid
- * kernel address.  Most 32-bit archs define it as always true (like this)
- * but most 64-bit archs actually perform a test.  What should we do here?
- */
-#define kern_addr_valid(addr)   (1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)         \
-                remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-#include <asm-generic/pgtable.h>
-
-
-/*
- * This gets called at the end of handling a page fault, when
- * the kernel has put a new PTE into the page table for the process.
- * We use it to ensure coherency between the i-cache and d-cache
- * for the page which has just been mapped in.
- * On machines which use an MMU hash table, we use this to put a
- * corresponding HPTE into the hash table ahead of time, instead of
- * waiting for the inevitable extra hash-table miss exception.
- */
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/include/asm-powerpc/phyp_dump.h b/include/asm-powerpc/phyp_dump.h
deleted file mode 100644
index fa74c6c3e106..000000000000
--- a/include/asm-powerpc/phyp_dump.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Hypervisor-assisted dump
- *
- * Linas Vepstas, Manish Ahuja 2008
- * Copyright 2008 IBM Corp.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#ifndef _PPC64_PHYP_DUMP_H
-#define _PPC64_PHYP_DUMP_H
-
-#ifdef CONFIG_PHYP_DUMP
-
-/* The RMR region will be saved for later dumping
- * whenever the kernel crashes. Set this to 256MB. */
-#define PHYP_DUMP_RMR_START 0x0
-#define PHYP_DUMP_RMR_END   (1UL<<28)
-
-struct phyp_dump {
-        /* Memory that is reserved during very early boot. */
-        unsigned long init_reserve_start;
-        unsigned long init_reserve_size;
-        /* cmd line options during boot */
-        unsigned long reserve_bootvar;
-        unsigned long phyp_dump_at_boot;
-        /* Check status during boot if dump supported, active & present*/
-        unsigned long phyp_dump_configured;
-        unsigned long phyp_dump_is_active;
-        /* store cpu & hpte size */
-        unsigned long cpu_state_size;
-        unsigned long hpte_region_size;
-        /* previous scratch area values */
-        unsigned long reserved_scratch_addr;
-        unsigned long reserved_scratch_size;
-};
-
-extern struct phyp_dump *phyp_dump_info;
-
-int early_init_dt_scan_phyp_dump(unsigned long node,
-                const char *uname, int depth, void *data);
-
-#endif /* CONFIG_PHYP_DUMP */
-#endif /* _PPC64_PHYP_DUMP_H */
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h
deleted file mode 100644
index 877c35a4356e..000000000000
--- a/include/asm-powerpc/pmac_feature.h
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * Definition of platform feature hooks for PowerMacs
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Paul Mackerras &
- *                    Ben. Herrenschmidt.
- *
- *
- * Note: I removed media-bay details from the feature stuff, I believe it's
- *       not worth it, the media-bay driver can directly use the mac-io
- *       ASIC registers.
- *
- * Implementation note: Currently, none of these functions will block.
- * However, they may internally protect themselves with a spinlock
- * for way too long. Be prepared for at least some of these to block
- * in the future.
- *
- * Unless specifically defined, the result code is assumed to be an
- * error when negative, 0 is the default success result. Some functions
- * may return additional positive result values.
- *
- * To keep implementation simple, all feature calls are assumed to have
- * the prototype parameters (struct device_node* node, int value).
- * When either is not used, pass 0.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_PMAC_FEATURE_H
-#define __ASM_POWERPC_PMAC_FEATURE_H
-
-#include <asm/macio.h>
-#include <asm/machdep.h>
-
-/*
- * Known Mac motherboard models
- *
- * Please, report any error here to benh@kernel.crashing.org, thanks !
- *
- * Note that I don't fully maintain this list for Core99 & MacRISC2
- * and I'm considering removing all NewWorld entries from it and
- * entirely rely on the model string.
- */
-
-/* PowerSurge are the first generation of PCI Pmacs. This include
- * all of the Grand-Central based machines. We currently don't
- * differenciate most of them.
- */
-#define PMAC_TYPE_PSURGE                0x10    /* PowerSurge */
-#define PMAC_TYPE_ANS                   0x11    /* Apple Network Server */
-
-/* Here is the infamous serie of OHare based machines
- */
-#define PMAC_TYPE_COMET                 0x20    /* Beleived to be PowerBook 2400 */
-#define PMAC_TYPE_HOOPER                0x21    /* Beleived to be PowerBook 3400 */
-#define PMAC_TYPE_KANGA                 0x22    /* PowerBook 3500 (first G3) */
-#define PMAC_TYPE_ALCHEMY               0x23    /* Alchemy motherboard base */
-#define PMAC_TYPE_GAZELLE               0x24    /* Spartacus, some 5xxx/6xxx */
-#define PMAC_TYPE_UNKNOWN_OHARE         0x2f    /* Unknown, but OHare based */
-
-/* Here are the Heathrow based machines
- * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
- */
-#define PMAC_TYPE_GOSSAMER              0x30    /* Gossamer motherboard */
-#define PMAC_TYPE_SILK                  0x31    /* Desktop PowerMac G3 */
-#define PMAC_TYPE_WALLSTREET            0x32    /* Wallstreet/Mainstreet PowerBook*/
-#define PMAC_TYPE_UNKNOWN_HEATHROW      0x3f    /* Unknown but heathrow based */
-
-/* Here are newworld machines based on Paddington (heathrow derivative)
- */
-#define PMAC_TYPE_101_PBOOK             0x40    /* 101 PowerBook (aka Lombard) */
-#define PMAC_TYPE_ORIG_IMAC             0x41    /* First generation iMac */
-#define PMAC_TYPE_YOSEMITE              0x42    /* B&W G3 */
-#define PMAC_TYPE_YIKES                 0x43    /* Yikes G4 (PCI graphics) */
-#define PMAC_TYPE_UNKNOWN_PADDINGTON    0x4f    /* Unknown but paddington based */
-
-/* Core99 machines based on UniNorth 1.0 and 1.5
- *
- * Note: A single entry here may cover several actual models according
- * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
- * FireWire based iMacs, etc...). Those machines are too similar to be
- * distinguished here, when they need to be differencied, use the
- * device-tree "model" or "compatible" property.
- */
-#define PMAC_TYPE_ORIG_IBOOK            0x40    /* First iBook model (no firewire) */
-#define PMAC_TYPE_SAWTOOTH              0x41    /* Desktop G4s */
-#define PMAC_TYPE_FW_IMAC               0x42    /* FireWire iMacs (except Pangea based) */
-#define PMAC_TYPE_FW_IBOOK              0x43    /* FireWire iBooks (except iBook2) */
-#define PMAC_TYPE_CUBE                  0x44    /* Cube PowerMac */
-#define PMAC_TYPE_QUICKSILVER           0x45    /* QuickSilver G4s */
-#define PMAC_TYPE_PISMO                 0x46    /* Pismo PowerBook */
-#define PMAC_TYPE_TITANIUM              0x47    /* Titanium PowerBook */
-#define PMAC_TYPE_TITANIUM2             0x48    /* Titanium II PowerBook (no L3, M6) */
-#define PMAC_TYPE_TITANIUM3             0x49    /* Titanium III PowerBook (with L3 & M7) */
-#define PMAC_TYPE_TITANIUM4             0x50    /* Titanium IV PowerBook (with L3 & M9) */
-#define PMAC_TYPE_EMAC                  0x50    /* eMac */
-#define PMAC_TYPE_UNKNOWN_CORE99        0x5f
-
-/* MacRisc2 with UniNorth 2.0 */
-#define PMAC_TYPE_RACKMAC               0x80    /* XServe */
-#define PMAC_TYPE_WINDTUNNEL            0x81
-
-/* MacRISC2 machines based on the Pangea chipset
- */
-#define PMAC_TYPE_PANGEA_IMAC           0x100   /* Flower Power iMac */
-#define PMAC_TYPE_IBOOK2                0x101   /* iBook2 (polycarbonate) */
-#define PMAC_TYPE_FLAT_PANEL_IMAC       0x102   /* Flat panel iMac */
-#define PMAC_TYPE_UNKNOWN_PANGEA        0x10f
-
-/* MacRISC2 machines based on the Intrepid chipset
- */
-#define PMAC_TYPE_UNKNOWN_INTREPID      0x11f   /* Generic */
-
-/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
- * but rather machine families
- */
-#define PMAC_TYPE_POWERMAC_G5           0x150   /* U3 & U3H based */
-#define PMAC_TYPE_POWERMAC_G5_U3L       0x151   /* U3L based desktop */
-#define PMAC_TYPE_IMAC_G5               0x152   /* iMac G5 */
-#define PMAC_TYPE_XSERVE_G5             0x153   /* Xserve G5 */
-#define PMAC_TYPE_UNKNOWN_K2            0x19f   /* Any other K2 based */
-#define PMAC_TYPE_UNKNOWN_SHASTA        0x19e   /* Any other Shasta based */
-
-/*
- * Motherboard flags
- */
-
-#define PMAC_MB_CAN_SLEEP               0x00000001
-#define PMAC_MB_HAS_FW_POWER            0x00000002
-#define PMAC_MB_OLD_CORE99              0x00000004
-#define PMAC_MB_MOBILE                  0x00000008
-#define PMAC_MB_MAY_SLEEP               0x00000010
-
-/*
- * Feature calls supported on pmac
- *
- */
-
-/*
- * Use this inline wrapper
- */
-struct device_node;
-
-static inline long pmac_call_feature(int selector, struct device_node* node,
-                                        long param, long value)
-{
-        if (!ppc_md.feature_call || !machine_is(powermac))
-                return -ENODEV;
-        return ppc_md.feature_call(selector, node, param, value);
-}
-
-/* PMAC_FTR_SERIAL_ENABLE       (struct device_node* node, int param, int value)
- * enable/disable an SCC side. Pass the node corresponding to the
- * channel side as a parameter.
- * param is the type of port
- * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
- * for use by xmon.
- */
-#define PMAC_FTR_SCC_ENABLE             PMAC_FTR_DEF(0)
-        #define PMAC_SCC_ASYNC          0
-        #define PMAC_SCC_IRDA           1
-        #define PMAC_SCC_I2S1           2
-        #define PMAC_SCC_FLAG_XMON      0x00001000
-
-/* PMAC_FTR_MODEM_ENABLE        (struct device_node* node, 0, int value)
- * enable/disable the internal modem.
- */
-#define PMAC_FTR_MODEM_ENABLE           PMAC_FTR_DEF(1)
-
-/* PMAC_FTR_SWIM3_ENABLE        (struct device_node* node, 0,int value)
- * enable/disable the swim3 (floppy) cell of a mac-io ASIC
- */
-#define PMAC_FTR_SWIM3_ENABLE           PMAC_FTR_DEF(2)
-
-/* PMAC_FTR_MESH_ENABLE         (struct device_node* node, 0, int value)
- * enable/disable the mesh (scsi) cell of a mac-io ASIC
- */
-#define PMAC_FTR_MESH_ENABLE            PMAC_FTR_DEF(3)
-
-/* PMAC_FTR_IDE_ENABLE          (struct device_node* node, int busID, int value)
- * enable/disable an IDE port of a mac-io ASIC
- * pass the busID parameter
- */
-#define PMAC_FTR_IDE_ENABLE             PMAC_FTR_DEF(4)
-
-/* PMAC_FTR_IDE_RESET           (struct device_node* node, int busID, int value)
- * assert(1)/release(0) an IDE reset line (mac-io IDE only)
- */
-#define PMAC_FTR_IDE_RESET              PMAC_FTR_DEF(5)
-
-/* PMAC_FTR_BMAC_ENABLE         (struct device_node* node, 0, int value)
- * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
- * it's reset line
- */
-#define PMAC_FTR_BMAC_ENABLE            PMAC_FTR_DEF(6)
-
-/* PMAC_FTR_GMAC_ENABLE         (struct device_node* node, 0, int value)
- * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
- * control the cell's clock.
- */
-#define PMAC_FTR_GMAC_ENABLE            PMAC_FTR_DEF(7)
-
-/* PMAC_FTR_GMAC_PHY_RESET      (struct device_node* node, 0, 0)
- * Perform a HW reset of the PHY connected to a gmac controller.
- * Pass the gmac device node, not the PHY node.
- */
-#define PMAC_FTR_GMAC_PHY_RESET         PMAC_FTR_DEF(8)
-
-/* PMAC_FTR_SOUND_CHIP_ENABLE   (struct device_node* node, 0, int value)
- * enable/disable the sound chip, whatever it is and provided it can
- * acually be controlled
- */
-#define PMAC_FTR_SOUND_CHIP_ENABLE      PMAC_FTR_DEF(9)
-
-/* -- add various tweaks related to sound routing -- */
-
-/* PMAC_FTR_AIRPORT_ENABLE      (struct device_node* node, 0, int value)
- * enable/disable the airport card
- */
-#define PMAC_FTR_AIRPORT_ENABLE         PMAC_FTR_DEF(10)
-
-/* PMAC_FTR_RESET_CPU           (NULL, int cpu_nr, 0)
- * toggle the reset line of a CPU on an uninorth-based SMP machine
- */
-#define PMAC_FTR_RESET_CPU              PMAC_FTR_DEF(11)
-
-/* PMAC_FTR_USB_ENABLE          (struct device_node* node, 0, int value)
- * enable/disable an USB cell, along with the power of the USB "pad"
- * on keylargo based machines
- */
-#define PMAC_FTR_USB_ENABLE             PMAC_FTR_DEF(12)
-
-/* PMAC_FTR_1394_ENABLE         (struct device_node* node, 0, int value)
- * enable/disable the firewire cell of an uninorth ASIC.
- */
-#define PMAC_FTR_1394_ENABLE            PMAC_FTR_DEF(13)
-
-/* PMAC_FTR_1394_CABLE_POWER    (struct device_node* node, 0, int value)
- * enable/disable the firewire cable power supply of the uninorth
- * firewire cell
- */
-#define PMAC_FTR_1394_CABLE_POWER       PMAC_FTR_DEF(14)
-
-/* PMAC_FTR_SLEEP_STATE         (struct device_node* node, 0, int value)
- * set the sleep state of the motherboard.
- *
- * Pass -1 as value to query for sleep capability
- * Pass 1 to set IOs to sleep
- * Pass 0 to set IOs to wake
- */
-#define PMAC_FTR_SLEEP_STATE            PMAC_FTR_DEF(15)
-
-/* PMAC_FTR_GET_MB_INFO         (NULL, selector, 0)
- *
- * returns some motherboard infos.
- * selector: 0  - model id
- *           1  - model flags (capabilities)
- *           2  - model name (cast to const char *)
- */
-#define PMAC_FTR_GET_MB_INFO            PMAC_FTR_DEF(16)
-#define   PMAC_MB_INFO_MODEL    0
-#define   PMAC_MB_INFO_FLAGS    1
-#define   PMAC_MB_INFO_NAME     2
-
-/* PMAC_FTR_READ_GPIO           (NULL, int index, 0)
- *
- * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
- * the value returned is a byte (positive), or a negative error code
- */
-#define PMAC_FTR_READ_GPIO              PMAC_FTR_DEF(17)
-
-/* PMAC_FTR_WRITE_GPIO          (NULL, int index, int value)
- *
- * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
- */
-#define PMAC_FTR_WRITE_GPIO             PMAC_FTR_DEF(18)
-
-/* PMAC_FTR_ENABLE_MPIC
- *
- * Enable the MPIC cell
- */
-#define PMAC_FTR_ENABLE_MPIC            PMAC_FTR_DEF(19)
-
-/* PMAC_FTR_AACK_DELAY_ENABLE   (NULL, int enable, 0)
- *
- * Enable/disable the AACK delay on the northbridge for systems using DFS
- */
-#define PMAC_FTR_AACK_DELAY_ENABLE      PMAC_FTR_DEF(20)
-
-/* PMAC_FTR_DEVICE_CAN_WAKE
- *
- * Used by video drivers to inform system that they can actually perform
- * wakeup from sleep
- */
-#define PMAC_FTR_DEVICE_CAN_WAKE        PMAC_FTR_DEF(22)
-
-
-/* Don't use those directly, they are for the sake of pmac_setup.c */
-extern long pmac_do_feature_call(unsigned int selector, ...);
-extern void pmac_feature_init(void);
-
-/* Video suspend tweak */
-extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
-extern void pmac_call_early_video_resume(void);
-
-#define PMAC_FTR_DEF(x) ((0x6660000) | (x))
-
-/* The AGP driver registers itself here */
-extern void pmac_register_agp_pm(struct pci_dev *bridge,
-                                 int (*suspend)(struct pci_dev *bridge),
-                                 int (*resume)(struct pci_dev *bridge));
-
-/* Those are meant to be used by video drivers to deal with AGP
- * suspend resume properly
- */
-extern void pmac_suspend_agp_for_card(struct pci_dev *dev);
-extern void pmac_resume_agp_for_card(struct pci_dev *dev);
-
-/*
- * The part below is for use by macio_asic.c only, do not rely
- * on the data structures or constants below in a normal driver
- *
- */
-
-#define MAX_MACIO_CHIPS         2
-
-enum {
-        macio_unknown = 0,
-        macio_grand_central,
-        macio_ohare,
-        macio_ohareII,
-        macio_heathrow,
-        macio_gatwick,
-        macio_paddington,
-        macio_keylargo,
-        macio_pangea,
-        macio_intrepid,
-        macio_keylargo2,
-        macio_shasta,
-};
-
-struct macio_chip
-{
-        struct device_node      *of_node;
-        int                     type;
-        const char              *name;
-        int                     rev;
-        volatile u32            __iomem *base;
-        unsigned long           flags;
-
-        /* For use by macio_asic PCI driver */
-        struct macio_bus        lbus;
-};
-
-extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
-
-#define MACIO_FLAG_SCCA_ON      0x00000001
-#define MACIO_FLAG_SCCB_ON      0x00000002
-#define MACIO_FLAG_SCC_LOCKED   0x00000004
-#define MACIO_FLAG_AIRPORT_ON   0x00000010
-#define MACIO_FLAG_FW_SUPPORTED 0x00000020
-
-extern struct macio_chip* macio_find(struct device_node* child, int type);
-
-#define MACIO_FCR32(macio, r)   ((macio)->base + ((r) >> 2))
-#define MACIO_FCR8(macio, r)    (((volatile u8 __iomem *)((macio)->base)) + (r))
-
-#define MACIO_IN32(r)           (in_le32(MACIO_FCR32(macio,r)))
-#define MACIO_OUT32(r,v)        (out_le32(MACIO_FCR32(macio,r), (v)))
-#define MACIO_BIS(r,v)          (MACIO_OUT32((r), MACIO_IN32(r) | (v)))
-#define MACIO_BIC(r,v)          (MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
-#define MACIO_IN8(r)            (in_8(MACIO_FCR8(macio,r)))
-#define MACIO_OUT8(r,v)         (out_8(MACIO_FCR8(macio,r), (v)))
-
-/*
- * Those are exported by pmac feature for internal use by arch code
- * only like the platform function callbacks, do not use directly in drivers
- */
-extern spinlock_t feature_lock;
-extern struct device_node *uninorth_node;
-extern u32 __iomem *uninorth_base;
-
-/*
- * Uninorth reg. access. Note that Uni-N regs are big endian
- */
-
-#define UN_REG(r)       (uninorth_base + ((r) >> 2))
-#define UN_IN(r)        (in_be32(UN_REG(r)))
-#define UN_OUT(r,v)     (out_be32(UN_REG(r), (v)))
-#define UN_BIS(r,v)     (UN_OUT((r), UN_IN(r) | (v)))
-#define UN_BIC(r,v)     (UN_OUT((r), UN_IN(r) & ~(v)))
-
-/* Uninorth variant:
- *
- * 0 = not uninorth
- * 1 = U1.x or U2.x
- * 3 = U3
- * 4 = U4
- */
-extern int pmac_get_uninorth_variant(void);
-
-#endif /* __ASM_POWERPC_PMAC_FEATURE_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/pmac_low_i2c.h b/include/asm-powerpc/pmac_low_i2c.h
deleted file mode 100644
index 131011bd7e76..000000000000
--- a/include/asm-powerpc/pmac_low_i2c.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* 
- *  include/asm-ppc/pmac_low_i2c.h
- *
- *  Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#ifndef __PMAC_LOW_I2C_H__
-#define __PMAC_LOW_I2C_H__
-#ifdef __KERNEL__
-
-/* i2c mode (based on the platform functions format) */
-enum {
-        pmac_i2c_mode_dumb      = 1,
-        pmac_i2c_mode_std       = 2,
-        pmac_i2c_mode_stdsub    = 3,
-        pmac_i2c_mode_combined  = 4,
-};
-
-/* RW bit in address */
-enum {
-        pmac_i2c_read           = 0x01,
-        pmac_i2c_write          = 0x00
-};
-
-/* i2c bus type */
-enum {
-        pmac_i2c_bus_keywest    = 0,
-        pmac_i2c_bus_pmu        = 1,
-        pmac_i2c_bus_smu        = 2,
-};
-
-/* i2c bus features */
-enum {
-        /* can_largesub : supports >1 byte subaddresses (SMU only) */
-        pmac_i2c_can_largesub   = 0x00000001u,
-
-        /* multibus : device node holds multiple busses, bus number is
-         * encoded in bits 0xff00 of "reg" of a given device
-         */
-        pmac_i2c_multibus       = 0x00000002u,
-};
-
-/* i2c busses in the system */
-struct pmac_i2c_bus;
-struct i2c_adapter;
-
-/* Init, called early during boot */
-extern int pmac_i2c_init(void);
-
-/* Lookup an i2c bus for a device-node. The node can be either the bus
- * node itself or a device below it. In the case of a multibus, the bus
- * node itself is the controller node, else, it's a child of the controller
- * node
- */
-extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node);
-
-/* Get the address for an i2c device. This strips the bus number if
- * necessary. The 7 bits address is returned 1 bit right shifted so that the
- * direction can be directly ored in
- */
-extern u8 pmac_i2c_get_dev_addr(struct device_node *device);
-
-/* Get infos about a bus */
-extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus);
-extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus);
-extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus);
-extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
-extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
-
-/* i2c layer adapter attach/detach */
-extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
-                                    struct i2c_adapter *adapter);
-extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
-                                    struct i2c_adapter *adapter);
-extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
-extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
-
-/* March a device or bus with an i2c adapter structure, to be used by drivers
- * to match device-tree nodes with i2c adapters during adapter discovery
- * callbacks
- */
-extern int pmac_i2c_match_adapter(struct device_node *dev,
-                                  struct i2c_adapter *adapter);
-
-
-/* (legacy) Locking functions exposed to i2c-keywest */
-extern int pmac_low_i2c_lock(struct device_node *np);
-extern int pmac_low_i2c_unlock(struct device_node *np);
-
-/* Access functions for platform code */
-extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled);
-extern void pmac_i2c_close(struct pmac_i2c_bus *bus);
-extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode);
-extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
-                         u32 subaddr, u8 *data,  int len);
-
-/* Suspend/resume code called by via-pmu directly for now */
-extern void pmac_pfunc_i2c_suspend(void);
-extern void pmac_pfunc_i2c_resume(void);
-
-#endif /* __KERNEL__ */
-#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/include/asm-powerpc/pmac_pfunc.h b/include/asm-powerpc/pmac_pfunc.h
deleted file mode 100644
index 1330d6a58c57..000000000000
--- a/include/asm-powerpc/pmac_pfunc.h
+++ /dev/null
@@ -1,252 +0,0 @@
-#ifndef __PMAC_PFUNC_H__
-#define __PMAC_PFUNC_H__
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-/* Flags in command lists */
-#define PMF_FLAGS_ON_INIT               0x80000000u
-#define PMF_FLGAS_ON_TERM               0x40000000u
-#define PMF_FLAGS_ON_SLEEP              0x20000000u
-#define PMF_FLAGS_ON_WAKE               0x10000000u
-#define PMF_FLAGS_ON_DEMAND             0x08000000u
-#define PMF_FLAGS_INT_GEN               0x04000000u
-#define PMF_FLAGS_HIGH_SPEED            0x02000000u
-#define PMF_FLAGS_LOW_SPEED             0x01000000u
-#define PMF_FLAGS_SIDE_EFFECTS          0x00800000u
-
-/*
- * Arguments to a platform function call.
- *
- * NOTE: By convention, pointer arguments point to an u32
- */
-struct pmf_args {
-        union {
-                u32 v;
-                u32 *p;
-        } u[4];
-        unsigned int count;
-};
-
-/*
- * A driver capable of interpreting commands provides a handlers
- * structure filled with whatever handlers are implemented by this
- * driver. Non implemented handlers are left NULL.
- *
- * PMF_STD_ARGS are the same arguments that are passed to the parser
- * and that gets passed back to the various handlers.
- *
- * Interpreting a given function always start with a begin() call which
- * returns an instance data to be passed around subsequent calls, and
- * ends with an end() call. This allows the low level driver to implement
- * locking policy or per-function instance data.
- *
- * For interrupt capable functions, irq_enable() is called when a client
- * registers, and irq_disable() is called when the last client unregisters
- * Note that irq_enable & irq_disable are called within a semaphore held
- * by the core, thus you should not try to register yourself to some other
- * pmf interrupt during those calls.
- */
-
-#define PMF_STD_ARGS    struct pmf_function *func, void *instdata, \
-                        struct pmf_args *args
-
-struct pmf_function;
-
-struct pmf_handlers {
-        void * (*begin)(struct pmf_function *func, struct pmf_args *args);
-        void (*end)(struct pmf_function *func, void *instdata);
-
-        int (*irq_enable)(struct pmf_function *func);
-        int (*irq_disable)(struct pmf_function *func);
-
-        int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask);
-        int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor);
-
-        int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
-        int (*read_reg32)(PMF_STD_ARGS, u32 offset);
-        int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
-        int (*read_reg16)(PMF_STD_ARGS, u32 offset);
-        int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
-        int (*read_reg8)(PMF_STD_ARGS, u32 offset);
-
-        int (*delay)(PMF_STD_ARGS, u32 duration);
-
-        int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
-        int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
-        int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
-
-        int (*read_i2c)(PMF_STD_ARGS, u32 len);
-        int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data);
-        int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen,
-                       const u8 *maskdata, const u8 *valuedata);
-
-        int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len);
-        int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data);
-        int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen,
-                       u32 totallen, const u8 *maskdata, const u8 *valuedata);
-
-        int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len);
-        int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data);
-        int (*set_i2c_mode)(PMF_STD_ARGS, int mode);
-        int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen,
-                           u32 totallen, const u8 *maskdata,
-                           const u8 *valuedata);
-
-        int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
-                               u32 xor);
-        int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
-                               u32 xor);
-        int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
-                              u32 xor);
-
-        int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
-        int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
-        int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
-
-        int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata,
-                                const u8 *valuedata);
-
-        struct module *owner;
-};
-
-
-/*
- * Drivers who expose platform functions register at init time, this
- * causes the platform functions for that device node to be parsed in
- * advance and associated with the device. The data structures are
- * partially public so a driver can walk the list of platform functions
- * and eventually inspect the flags
- */
-struct pmf_device;
-
-struct pmf_function {
-        /* All functions for a given driver are linked */
-        struct list_head        link;
-
-        /* Function node & driver data */
-        struct device_node      *node;
-        void                    *driver_data;
-
-        /* For internal use by core */
-        struct pmf_device       *dev;
-
-        /* The name is the "xxx" in "platform-do-xxx", this is how
-         * platform functions are identified by this code. Some functions
-         * only operate for a given target, in which case the phandle is
-         * here (or 0 if the filter doesn't apply)
-         */
-        const char              *name;
-        u32                     phandle;
-
-        /* The flags for that function. You can have several functions
-         * with the same name and different flag
-         */
-        u32                     flags;
-
-        /* The actual tokenized function blob */
-        const void              *data;
-        unsigned int            length;
-
-        /* Interrupt clients */
-        struct list_head        irq_clients;
-
-        /* Refcounting */
-        struct kref             ref;
-};
-
-/*
- * For platform functions that are interrupts, one can register
- * irq_client structures. You canNOT use the same structure twice
- * as it contains a link member. Also, the callback is called with
- * a spinlock held, you must not call back into any of the pmf_* functions
- * from within that callback
- */
-struct pmf_irq_client {
-        void                    (*handler)(void *data);
-        void                    *data;
-        struct module           *owner;
-        struct list_head        link;
-        struct pmf_function     *func;
-};
-
-
-/*
- * Register/Unregister a function-capable driver and its handlers
- */
-extern int pmf_register_driver(struct device_node *np,
-                              struct pmf_handlers *handlers,
-                              void *driverdata);
-
-extern void pmf_unregister_driver(struct device_node *np);
-
-
-/*
- * Register/Unregister interrupt clients
- */
-extern int pmf_register_irq_client(struct device_node *np,
-                                   const char *name,
-                                   struct pmf_irq_client *client);
-
-extern void pmf_unregister_irq_client(struct pmf_irq_client *client);
-
-/*
- * Called by the handlers when an irq happens
- */
-extern void pmf_do_irq(struct pmf_function *func);
-
-
-/*
- * Low level call to platform functions.
- *
- * The phandle can filter on the target object for functions that have
- * multiple targets, the flags allow you to restrict the call to a given
- * combination of flags.
- *
- * The args array contains as many arguments as is required by the function,
- * this is dependent on the function you are calling, unfortunately Apple
- * mechanism provides no way to encode that so you have to get it right at
- * the call site. Some functions require no args, in which case, you can
- * pass NULL.
- *
- * You can also pass NULL to the name. This will match any function that has
- * the appropriate combination of flags & phandle or you can pass 0 to the
- * phandle to match any
- */
-extern int pmf_do_functions(struct device_node *np, const char *name,
-                            u32 phandle, u32 flags, struct pmf_args *args);
-
-
-
-/*
- * High level call to a platform function.
- *
- * This one looks for the platform-xxx first so you should call it to the
- * actual target if any. It will fallback to platform-do-xxx if it can't
- * find one. It will also exclusively target functions that have
- * the "OnDemand" flag.
- */
-
-extern int pmf_call_function(struct device_node *target, const char *name,
-                             struct pmf_args *args);
-
-
-/*
- * For low latency interrupt usage, you can lookup for on-demand functions
- * using the functions below
- */
-
-extern struct pmf_function *pmf_find_function(struct device_node *target,
-                                              const char *name);
-
-extern struct pmf_function * pmf_get_function(struct pmf_function *func);
-extern void pmf_put_function(struct pmf_function *func);
-
-extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args);
-
-
-/* Suspend/resume code called by via-pmu directly for now */
-extern void pmac_pfunc_base_suspend(void);
-extern void pmac_pfunc_base_resume(void);
-
-#endif /* __PMAC_PFUNC_H__ */
diff --git a/include/asm-powerpc/pmc.h b/include/asm-powerpc/pmc.h
deleted file mode 100644
index d6a616a1b3ea..000000000000
--- a/include/asm-powerpc/pmc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * pmc.h
- * Copyright (C) 2004  David Gibson, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _POWERPC_PMC_H
-#define _POWERPC_PMC_H
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-
-typedef void (*perf_irq_t)(struct pt_regs *);
-extern perf_irq_t perf_irq;
-
-int reserve_pmc_hardware(perf_irq_t new_perf_irq);
-void release_pmc_hardware(void);
-
-#ifdef CONFIG_PPC64
-void power4_enable_pmcs(void);
-void pasemi_enable_pmcs(void);
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_PMC_H */
diff --git a/include/asm-powerpc/pmi.h b/include/asm-powerpc/pmi.h
deleted file mode 100644
index b4e91fbf5081..000000000000
--- a/include/asm-powerpc/pmi.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _POWERPC_PMI_H
-#define _POWERPC_PMI_H
-
-/*
- * Definitions for talking with PMI device on PowerPC
- *
- * PMI (Platform Management Interrupt) is a way to communicate
- * with the BMC (Baseboard Management Controller) via interrupts.
- * Unlike IPMI it is bidirectional and has a low latency.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __KERNEL__
-
-#define PMI_TYPE_FREQ_CHANGE    0x01
-#define PMI_TYPE_POWER_BUTTON   0x02
-#define PMI_READ_TYPE           0
-#define PMI_READ_DATA0          1
-#define PMI_READ_DATA1          2
-#define PMI_READ_DATA2          3
-#define PMI_WRITE_TYPE          4
-#define PMI_WRITE_DATA0         5
-#define PMI_WRITE_DATA1         6
-#define PMI_WRITE_DATA2         7
-
-#define PMI_ACK                 0x80
-
-#define PMI_TIMEOUT             100
-
-typedef struct {
-        u8      type;
-        u8      data0;
-        u8      data1;
-        u8      data2;
-} pmi_message_t;
-
-struct pmi_handler {
-        struct list_head node;
-        u8 type;
-        void (*handle_pmi_message) (pmi_message_t);
-};
-
-int pmi_register_handler(struct pmi_handler *);
-void pmi_unregister_handler(struct pmi_handler *);
-
-int pmi_send_message(pmi_message_t);
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_PMI_H */
diff --git a/include/asm-powerpc/poll.h b/include/asm-powerpc/poll.h
deleted file mode 100644
index c98509d3149e..000000000000
--- a/include/asm-powerpc/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/include/asm-powerpc/posix_types.h b/include/asm-powerpc/posix_types.h
deleted file mode 100644
index c4e396b540df..000000000000
--- a/include/asm-powerpc/posix_types.h
+++ /dev/null
@@ -1,128 +0,0 @@
-#ifndef _ASM_POWERPC_POSIX_TYPES_H
-#define _ASM_POWERPC_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long   __kernel_ino_t;
-typedef unsigned int    __kernel_mode_t;
-typedef long            __kernel_off_t;
-typedef int             __kernel_pid_t;
-typedef unsigned int    __kernel_uid_t;
-typedef unsigned int    __kernel_gid_t;
-typedef long            __kernel_ptrdiff_t;
-typedef long            __kernel_time_t;
-typedef long            __kernel_clock_t;
-typedef int             __kernel_timer_t;
-typedef int             __kernel_clockid_t;
-typedef long            __kernel_suseconds_t;
-typedef int             __kernel_daddr_t;
-typedef char *          __kernel_caddr_t;
-typedef unsigned short  __kernel_uid16_t;
-typedef unsigned short  __kernel_gid16_t;
-typedef unsigned int    __kernel_uid32_t;
-typedef unsigned int    __kernel_gid32_t;
-typedef unsigned int    __kernel_old_uid_t;
-typedef unsigned int    __kernel_old_gid_t;
-
-#ifdef __powerpc64__
-typedef unsigned long   __kernel_nlink_t;
-typedef int             __kernel_ipc_pid_t;
-typedef unsigned long   __kernel_size_t;
-typedef long            __kernel_ssize_t;
-typedef unsigned long   __kernel_old_dev_t;
-#else
-typedef unsigned short  __kernel_nlink_t;
-typedef short           __kernel_ipc_pid_t;
-typedef unsigned int    __kernel_size_t;
-typedef int             __kernel_ssize_t;
-typedef unsigned int    __kernel_old_dev_t;
-#endif
-
-#ifdef __powerpc64__
-typedef long long       __kernel_loff_t;
-#else
-#ifdef __GNUC__
-typedef long long       __kernel_loff_t;
-#endif
-#endif
-
-typedef struct {
-        int     val[2];
-} __kernel_fsid_t;
-
-#ifndef __GNUC__
-
-#define __FD_SET(d, set)        ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-#define __FD_CLR(d, set)        ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-#define __FD_ISSET(d, set)      (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
-#define __FD_ZERO(set)  \
-  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
-
-#else /* __GNUC__ */
-
-#if defined(__KERNEL__)
-/* With GNU C, use inline functions instead so args are evaluated only once: */
-
-#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-        unsigned long _tmp = fd / __NFDBITS;
-        unsigned long _rem = fd % __NFDBITS;
-        fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
-}
-
-#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-        unsigned long _tmp = fd / __NFDBITS;
-        unsigned long _rem = fd % __NFDBITS;
-        fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
-}
-
-#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
-{ 
-        unsigned long _tmp = fd / __NFDBITS;
-        unsigned long _rem = fd % __NFDBITS;
-        return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *p)
-{
-        unsigned long *tmp = (unsigned long *)p->fds_bits;
-        int i;
-
-        if (__builtin_constant_p(__FDSET_LONGS)) {
-                switch (__FDSET_LONGS) {
-                      case 16:
-                        tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-                        tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-
-                      case 8:
-                        tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-
-                      case 4:
-                        tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-                        return;
-                }
-        }
-        i = __FDSET_LONGS;
-        while (i) {
-                i--;
-                *tmp = 0;
-                tmp++;
-        }
-}
-
-#endif /* defined(__KERNEL__) */
-#endif /* __GNUC__ */
-#endif /* _ASM_POWERPC_POSIX_TYPES_H */
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
deleted file mode 100644
index 854ab713f56c..000000000000
--- a/include/asm-powerpc/ppc-pci.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_PPC_PCI_H
-#define _ASM_POWERPC_PPC_PCI_H
-#ifdef __KERNEL__
-
-#ifdef CONFIG_PCI
-
-#include <linux/pci.h>
-#include <asm/pci-bridge.h>
-
-extern unsigned long isa_io_base;
-
-extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
-extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
-
-
-extern struct list_head hose_list;
-
-extern void find_and_init_phbs(void);
-
-extern struct pci_dev *isa_bridge_pcidev;       /* may be NULL if no ISA bus */
-
-/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
-#define BUID_HI(buid) ((buid) >> 32)
-#define BUID_LO(buid) ((buid) & 0xffffffff)
-
-/* PCI device_node operations */
-struct device_node;
-typedef void *(*traverse_func)(struct device_node *me, void *data);
-void *traverse_pci_devices(struct device_node *start, traverse_func pre,
-                void *data);
-
-extern void pci_devs_phb_init(void);
-extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
-extern void scan_phb(struct pci_controller *hose);
-
-/* From rtas_pci.h */
-extern void init_pci_config_tokens (void);
-extern unsigned long get_phb_buid (struct device_node *);
-extern int rtas_setup_phb(struct pci_controller *phb);
-
-extern unsigned long pci_probe_only;
-
-/* ---- EEH internal-use-only related routines ---- */
-#ifdef CONFIG_EEH
-
-void pci_addr_cache_insert_device(struct pci_dev *dev);
-void pci_addr_cache_remove_device(struct pci_dev *dev);
-void pci_addr_cache_build(void);
-struct pci_dev *pci_get_device_by_addr(unsigned long addr);
-
-/**
- * eeh_slot_error_detail -- record and EEH error condition to the log
- * @pdn:      pci device node
- * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
- *
- * Obtains the EEH error details from the RTAS subsystem,
- * and then logs these details with the RTAS error log system.
- */
-#define EEH_LOG_TEMP_FAILURE 1
-#define EEH_LOG_PERM_FAILURE 2
-void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
-
-/**
- * rtas_pci_enable - enable IO transfers for this slot
- * @pdn:       pci device node
- * @function:  either EEH_THAW_MMIO or EEH_THAW_DMA 
- *
- * Enable I/O transfers to this slot 
- */
-#define EEH_THAW_MMIO 2
-#define EEH_THAW_DMA  3
-int rtas_pci_enable(struct pci_dn *pdn, int function);
-
-/**
- * rtas_set_slot_reset -- unfreeze a frozen slot
- * @pdn:       pci device node
- *
- * Clear the EEH-frozen condition on a slot.  This routine
- * does this by asserting the PCI #RST line for 1/8th of
- * a second; this routine will sleep while the adapter is
- * being reset.
- *
- * Returns a non-zero value if the reset failed.
- */
-int rtas_set_slot_reset (struct pci_dn *);
-int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
-
-/** 
- * eeh_restore_bars - Restore device configuration info.
- * @pdn:       pci device node
- *
- * A reset of a PCI device will clear out its config space.
- * This routines will restore the config space for this
- * device, and is children, to values previously obtained
- * from the firmware.
- */
-void eeh_restore_bars(struct pci_dn *);
-
-/**
- * rtas_configure_bridge -- firmware initialization of pci bridge
- * @pdn:       pci device node
- *
- * Ask the firmware to configure all PCI bridges devices
- * located behind the indicated node. Required after a
- * pci device reset. Does essentially the same hing as
- * eeh_restore_bars, but for brdges, and lets firmware 
- * do the work.
- */
-void rtas_configure_bridge(struct pci_dn *);
-
-int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
-int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
-
-/**
- * eeh_mark_slot -- set mode flags for pertition endpoint
- * @pdn:       pci device node
- *
- * mark and clear slots: find "partition endpoint" PE and set or 
- * clear the flags for each subnode of the PE.
- */
-void eeh_mark_slot (struct device_node *dn, int mode_flag);
-void eeh_clear_slot (struct device_node *dn, int mode_flag);
-
-/**
- * find_device_pe -- Find the associated "Partiationable Endpoint" PE
- * @pdn:       pci device node
- */
-struct device_node * find_device_pe(struct device_node *dn);
-
-void eeh_sysfs_add_device(struct pci_dev *pdev);
-void eeh_sysfs_remove_device(struct pci_dev *pdev);
-
-#endif /* CONFIG_EEH */
-
-#else /* CONFIG_PCI */
-static inline void find_and_init_phbs(void) { }
-static inline void init_pci_config_tokens(void) { }
-#endif /* !CONFIG_PCI */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PPC_PCI_H */
diff --git a/include/asm-powerpc/ppc4xx.h b/include/asm-powerpc/ppc4xx.h
deleted file mode 100644
index 033039a80c42..000000000000
--- a/include/asm-powerpc/ppc4xx.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * PPC4xx Prototypes and definitions
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_POWERPC_PPC4xx_H__
-#define __ASM_POWERPC_PPC4xx_H__
-
-extern void ppc4xx_reset_system(char *cmd);
-
-#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h
deleted file mode 100644
index 0966899d974b..000000000000
--- a/include/asm-powerpc/ppc_asm.h
+++ /dev/null
@@ -1,689 +0,0 @@
-/*
- * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
- */
-#ifndef _ASM_POWERPC_PPC_ASM_H
-#define _ASM_POWERPC_PPC_ASM_H
-
-#include <linux/stringify.h>
-#include <asm/asm-compat.h>
-#include <asm/processor.h>
-
-#ifndef __ASSEMBLY__
-#error __FILE__ should only be used in assembler files
-#else
-
-#define SZL                     (BITS_PER_LONG/8)
-
-/*
- * Stuff for accurate CPU time accounting.
- * These macros handle transitions between user and system state
- * in exception entry and exit and accumulate time to the
- * user_time and system_time fields in the paca.
- */
-
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
-#define ACCOUNT_CPU_USER_EXIT(ra, rb)
-#else
-#define ACCOUNT_CPU_USER_ENTRY(ra, rb)                                  \
-        beq     2f;                     /* if from kernel mode */       \
-BEGIN_FTR_SECTION;                                                      \
-        mfspr   ra,SPRN_PURR;           /* get processor util. reg */   \
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);                                    \
-BEGIN_FTR_SECTION;                                                      \
-        MFTB(ra);                       /* or get TB if no PURR */      \
-END_FTR_SECTION_IFCLR(CPU_FTR_PURR);                                    \
-        ld      rb,PACA_STARTPURR(r13);                                 \
-        std     ra,PACA_STARTPURR(r13);                                 \
-        subf    rb,rb,ra;               /* subtract start value */      \
-        ld      ra,PACA_USER_TIME(r13);                                 \
-        add     ra,ra,rb;               /* add on to user time */       \
-        std     ra,PACA_USER_TIME(r13);                                 \
-2:
-
-#define ACCOUNT_CPU_USER_EXIT(ra, rb)                                   \
-BEGIN_FTR_SECTION;                                                      \
-        mfspr   ra,SPRN_PURR;           /* get processor util. reg */   \
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);                                    \
-BEGIN_FTR_SECTION;                                                      \
-        MFTB(ra);                       /* or get TB if no PURR */      \
-END_FTR_SECTION_IFCLR(CPU_FTR_PURR);                                    \
-        ld      rb,PACA_STARTPURR(r13);                                 \
-        std     ra,PACA_STARTPURR(r13);                                 \
-        subf    rb,rb,ra;               /* subtract start value */      \
-        ld      ra,PACA_SYSTEM_TIME(r13);                               \
-        add     ra,ra,rb;               /* add on to user time */       \
-        std     ra,PACA_SYSTEM_TIME(r13);
-#endif
-
-/*
- * Macros for storing registers into and loading registers from
- * exception frames.
- */
-#ifdef __powerpc64__
-#define SAVE_GPR(n, base)       std     n,GPR0+8*(n)(base)
-#define REST_GPR(n, base)       ld      n,GPR0+8*(n)(base)
-#define SAVE_NVGPRS(base)       SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
-#define REST_NVGPRS(base)       REST_8GPRS(14, base); REST_10GPRS(22, base)
-#else
-#define SAVE_GPR(n, base)       stw     n,GPR0+4*(n)(base)
-#define REST_GPR(n, base)       lwz     n,GPR0+4*(n)(base)
-#define SAVE_NVGPRS(base)       SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
-                                SAVE_10GPRS(22, base)
-#define REST_NVGPRS(base)       REST_GPR(13, base); REST_8GPRS(14, base); \
-                                REST_10GPRS(22, base)
-#endif
-
-/*
- * Define what the VSX XX1 form instructions will look like, then add
- * the 128 bit load store instructions based on that.
- */
-#define VSX_XX1(xs, ra, rb)     (((xs) & 0x1f) << 21 | ((ra) << 16) |  \
-                                 ((rb) << 11) | (((xs) >> 5)))
-
-#define STXVD2X(xs, ra, rb)     .long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
-#define LXVD2X(xs, ra, rb)      .long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
-
-#define SAVE_2GPRS(n, base)     SAVE_GPR(n, base); SAVE_GPR(n+1, base)
-#define SAVE_4GPRS(n, base)     SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
-#define SAVE_8GPRS(n, base)     SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
-#define SAVE_10GPRS(n, base)    SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
-#define REST_2GPRS(n, base)     REST_GPR(n, base); REST_GPR(n+1, base)
-#define REST_4GPRS(n, base)     REST_2GPRS(n, base); REST_2GPRS(n+2, base)
-#define REST_8GPRS(n, base)     REST_4GPRS(n, base); REST_4GPRS(n+4, base)
-#define REST_10GPRS(n, base)    REST_8GPRS(n, base); REST_2GPRS(n+8, base)
-
-#define SAVE_FPR(n, base)       stfd    n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
-#define SAVE_2FPRS(n, base)     SAVE_FPR(n, base); SAVE_FPR(n+1, base)
-#define SAVE_4FPRS(n, base)     SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
-#define SAVE_8FPRS(n, base)     SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
-#define SAVE_16FPRS(n, base)    SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
-#define SAVE_32FPRS(n, base)    SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
-#define REST_FPR(n, base)       lfd     n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
-#define REST_2FPRS(n, base)     REST_FPR(n, base); REST_FPR(n+1, base)
-#define REST_4FPRS(n, base)     REST_2FPRS(n, base); REST_2FPRS(n+2, base)
-#define REST_8FPRS(n, base)     REST_4FPRS(n, base); REST_4FPRS(n+4, base)
-#define REST_16FPRS(n, base)    REST_8FPRS(n, base); REST_8FPRS(n+8, base)
-#define REST_32FPRS(n, base)    REST_16FPRS(n, base); REST_16FPRS(n+16, base)
-
-#define SAVE_VR(n,b,base)       li b,THREAD_VR0+(16*(n));  stvx n,b,base
-#define SAVE_2VRS(n,b,base)     SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
-#define SAVE_4VRS(n,b,base)     SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
-#define SAVE_8VRS(n,b,base)     SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
-#define SAVE_16VRS(n,b,base)    SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
-#define SAVE_32VRS(n,b,base)    SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
-#define REST_VR(n,b,base)       li b,THREAD_VR0+(16*(n)); lvx n,b,base
-#define REST_2VRS(n,b,base)     REST_VR(n,b,base); REST_VR(n+1,b,base)
-#define REST_4VRS(n,b,base)     REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
-#define REST_8VRS(n,b,base)     REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
-#define REST_16VRS(n,b,base)    REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
-#define REST_32VRS(n,b,base)    REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
-
-/* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base)      li b,THREAD_VSR0+(16*(n));  STXVD2X(n,b,base)
-#define SAVE_2VSRS(n,b,base)    SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
-#define SAVE_4VSRS(n,b,base)    SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
-#define SAVE_8VSRS(n,b,base)    SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
-#define SAVE_16VSRS(n,b,base)   SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
-#define SAVE_32VSRS(n,b,base)   SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base)      li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
-#define REST_2VSRS(n,b,base)    REST_VSR(n,b,base); REST_VSR(n+1,b,base)
-#define REST_4VSRS(n,b,base)    REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
-#define REST_8VSRS(n,b,base)    REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
-#define REST_16VSRS(n,b,base)   REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
-#define REST_32VSRS(n,b,base)   REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
-/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base)     li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,b,base)
-#define SAVE_2VSRSU(n,b,base)   SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
-#define SAVE_4VSRSU(n,b,base)   SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
-#define SAVE_8VSRSU(n,b,base)   SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
-#define SAVE_16VSRSU(n,b,base)  SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
-#define SAVE_32VSRSU(n,b,base)  SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base)     li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
-#define REST_2VSRSU(n,b,base)   REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
-#define REST_4VSRSU(n,b,base)   REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
-#define REST_8VSRSU(n,b,base)   REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
-#define REST_16VSRSU(n,b,base)  REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
-#define REST_32VSRSU(n,b,base)  REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
-
-#define SAVE_EVR(n,s,base)      evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
-#define SAVE_2EVRS(n,s,base)    SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
-#define SAVE_4EVRS(n,s,base)    SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base)
-#define SAVE_8EVRS(n,s,base)    SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base)
-#define SAVE_16EVRS(n,s,base)   SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base)
-#define SAVE_32EVRS(n,s,base)   SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base)
-#define REST_EVR(n,s,base)      lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n
-#define REST_2EVRS(n,s,base)    REST_EVR(n,s,base); REST_EVR(n+1,s,base)
-#define REST_4EVRS(n,s,base)    REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base)
-#define REST_8EVRS(n,s,base)    REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base)
-#define REST_16EVRS(n,s,base)   REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base)
-#define REST_32EVRS(n,s,base)   REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base)
-
-/* Macros to adjust thread priority for hardware multithreading */
-#define HMT_VERY_LOW    or      31,31,31        # very low priority
-#define HMT_LOW         or      1,1,1
-#define HMT_MEDIUM_LOW  or      6,6,6           # medium low priority
-#define HMT_MEDIUM      or      2,2,2
-#define HMT_MEDIUM_HIGH or      5,5,5           # medium high priority
-#define HMT_HIGH        or      3,3,3
-
-/* handle instructions that older assemblers may not know */
-#define RFCI            .long 0x4c000066        /* rfci instruction */
-#define RFDI            .long 0x4c00004e        /* rfdi instruction */
-#define RFMCI           .long 0x4c00004c        /* rfmci instruction */
-
-#ifdef __KERNEL__
-#ifdef CONFIG_PPC64
-
-#define XGLUE(a,b) a##b
-#define GLUE(a,b) XGLUE(a,b)
-
-#define _GLOBAL(name) \
-        .section ".text"; \
-        .align 2 ; \
-        .globl name; \
-        .globl GLUE(.,name); \
-        .section ".opd","aw"; \
-name: \
-        .quad GLUE(.,name); \
-        .quad .TOC.@tocbase; \
-        .quad 0; \
-        .previous; \
-        .type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _INIT_GLOBAL(name) \
-        .section ".text.init.refok"; \
-        .align 2 ; \
-        .globl name; \
-        .globl GLUE(.,name); \
-        .section ".opd","aw"; \
-name: \
-        .quad GLUE(.,name); \
-        .quad .TOC.@tocbase; \
-        .quad 0; \
-        .previous; \
-        .type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _KPROBE(name) \
-        .section ".kprobes.text","a"; \
-        .align 2 ; \
-        .globl name; \
-        .globl GLUE(.,name); \
-        .section ".opd","aw"; \
-name: \
-        .quad GLUE(.,name); \
-        .quad .TOC.@tocbase; \
-        .quad 0; \
-        .previous; \
-        .type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _STATIC(name) \
-        .section ".text"; \
-        .align 2 ; \
-        .section ".opd","aw"; \
-name: \
-        .quad GLUE(.,name); \
-        .quad .TOC.@tocbase; \
-        .quad 0; \
-        .previous; \
-        .type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _INIT_STATIC(name) \
-        .section ".text.init.refok"; \
-        .align 2 ; \
-        .section ".opd","aw"; \
-name: \
-        .quad GLUE(.,name); \
-        .quad .TOC.@tocbase; \
-        .quad 0; \
-        .previous; \
-        .type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#else /* 32-bit */
-
-#define _ENTRY(n)       \
-        .globl n;       \
-n:
-
-#define _GLOBAL(n)      \
-        .text;          \
-        .stabs __stringify(n:F-1),N_FUN,0,0,n;\
-        .globl n;       \
-n:
-
-#define _KPROBE(n)      \
-        .section ".kprobes.text","a";   \
-        .globl  n;      \
-n:
-
-#endif
-
-/* 
- * LOAD_REG_IMMEDIATE(rn, expr)
- *   Loads the value of the constant expression 'expr' into register 'rn'
- *   using immediate instructions only.  Use this when it's important not
- *   to reference other data (i.e. on ppc64 when the TOC pointer is not
- *   valid).
- *
- * LOAD_REG_ADDR(rn, name)
- *   Loads the address of label 'name' into register 'rn'.  Use this when
- *   you don't particularly need immediate instructions only, but you need
- *   the whole address in one register (e.g. it's a structure address and
- *   you want to access various offsets within it).  On ppc32 this is
- *   identical to LOAD_REG_IMMEDIATE.
- *
- * LOAD_REG_ADDRBASE(rn, name)
- * ADDROFF(name)
- *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
- *   register 'rn'.  ADDROFF(name) returns the remainder of the address as
- *   a constant expression.  ADDROFF(name) is a signed expression < 16 bits
- *   in size, so is suitable for use directly as an offset in load and store
- *   instructions.  Use this when loading/storing a single word or less as:
- *      LOAD_REG_ADDRBASE(rX, name)
- *      ld      rY,ADDROFF(name)(rX)
- */
-#ifdef __powerpc64__
-#define LOAD_REG_IMMEDIATE(reg,expr)            \
-        lis     (reg),(expr)@highest;           \
-        ori     (reg),(reg),(expr)@higher;      \
-        rldicr  (reg),(reg),32,31;              \
-        oris    (reg),(reg),(expr)@h;           \
-        ori     (reg),(reg),(expr)@l;
-
-#define LOAD_REG_ADDR(reg,name)                 \
-        ld      (reg),name@got(r2)
-
-#define LOAD_REG_ADDRBASE(reg,name)     LOAD_REG_ADDR(reg,name)
-#define ADDROFF(name)                   0
-
-/* offsets for stack frame layout */
-#define LRSAVE  16
-
-#else /* 32-bit */
-
-#define LOAD_REG_IMMEDIATE(reg,expr)            \
-        lis     (reg),(expr)@ha;                \
-        addi    (reg),(reg),(expr)@l;
-
-#define LOAD_REG_ADDR(reg,name)         LOAD_REG_IMMEDIATE(reg, name)
-
-#define LOAD_REG_ADDRBASE(reg, name)    lis     (reg),name@ha
-#define ADDROFF(name)                   name@l
-
-/* offsets for stack frame layout */
-#define LRSAVE  4
-
-#endif
-
-/* various errata or part fixups */
-#ifdef CONFIG_PPC601_SYNC_FIX
-#define SYNC                            \
-BEGIN_FTR_SECTION                       \
-        sync;                           \
-        isync;                          \
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-#define SYNC_601                        \
-BEGIN_FTR_SECTION                       \
-        sync;                           \
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-#define ISYNC_601                       \
-BEGIN_FTR_SECTION                       \
-        isync;                          \
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-#else
-#define SYNC
-#define SYNC_601
-#define ISYNC_601
-#endif
-
-#ifdef CONFIG_PPC_CELL
-#define MFTB(dest)                      \
-90:     mftb  dest;                     \
-BEGIN_FTR_SECTION_NESTED(96);           \
-        cmpwi dest,0;                   \
-        beq-  90b;                      \
-END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
-#else
-#define MFTB(dest)                      mftb dest
-#endif
-
-#ifndef CONFIG_SMP
-#define TLBSYNC
-#else /* CONFIG_SMP */
-/* tlbsync is not implemented on 601 */
-#define TLBSYNC                         \
-BEGIN_FTR_SECTION                       \
-        tlbsync;                        \
-        sync;                           \
-END_FTR_SECTION_IFCLR(CPU_FTR_601)
-#endif
-
-        
-/*
- * This instruction is not implemented on the PPC 603 or 601; however, on
- * the 403GCX and 405GP tlbia IS defined and tlbie is not.
- * All of these instructions exist in the 8xx, they have magical powers,
- * and they must be used.
- */
-
-#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
-#define tlbia                                   \
-        li      r4,1024;                        \
-        mtctr   r4;                             \
-        lis     r4,KERNELBASE@h;                \
-0:      tlbie   r4;                             \
-        addi    r4,r4,0x1000;                   \
-        bdnz    0b
-#endif
-
-
-#ifdef CONFIG_IBM440EP_ERR42
-#define PPC440EP_ERR42 isync
-#else
-#define PPC440EP_ERR42
-#endif
-
-
-#if defined(CONFIG_BOOKE)
-#define toreal(rd)
-#define fromreal(rd)
-
-/*
- * We use addis to ensure compatibility with the "classic" ppc versions of
- * these macros, which use rs = 0 to get the tophys offset in rd, rather than
- * converting the address in r0, and so this version has to do that too
- * (i.e. set register rd to 0 when rs == 0).
- */
-#define tophys(rd,rs)                           \
-        addis   rd,rs,0
-
-#define tovirt(rd,rs)                           \
-        addis   rd,rs,0
-
-#elif defined(CONFIG_PPC64)
-#define toreal(rd)              /* we can access c000... in real mode */
-#define fromreal(rd)
-
-#define tophys(rd,rs)                           \
-        clrldi  rd,rs,2
-
-#define tovirt(rd,rs)                           \
-        rotldi  rd,rs,16;                       \
-        ori     rd,rd,((KERNELBASE>>48)&0xFFFF);\
-        rotldi  rd,rd,48
-#else
-/*
- * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
- * physical base address of RAM at compile time.
- */
-#define toreal(rd)      tophys(rd,rd)
-#define fromreal(rd)    tovirt(rd,rd)
-
-#define tophys(rd,rs)                           \
-0:      addis   rd,rs,-KERNELBASE@h;            \
-        .section ".vtop_fixup","aw";            \
-        .align  1;                              \
-        .long   0b;                             \
-        .previous
-
-#define tovirt(rd,rs)                           \
-0:      addis   rd,rs,KERNELBASE@h;             \
-        .section ".ptov_fixup","aw";            \
-        .align  1;                              \
-        .long   0b;                             \
-        .previous
-#endif
-
-#ifdef CONFIG_PPC64
-#define RFI             rfid
-#define MTMSRD(r)       mtmsrd  r
-
-#else
-#define FIX_SRR1(ra, rb)
-#ifndef CONFIG_40x
-#define RFI             rfi
-#else
-#define RFI             rfi; b .        /* Prevent prefetch past rfi */
-#endif
-#define MTMSRD(r)       mtmsr   r
-#define CLR_TOP32(r)
-#endif
-
-#endif /* __KERNEL__ */
-
-/* The boring bits... */
-
-/* Condition Register Bit Fields */
-
-#define cr0     0
-#define cr1     1
-#define cr2     2
-#define cr3     3
-#define cr4     4
-#define cr5     5
-#define cr6     6
-#define cr7     7
-
-
-/* General Purpose Registers (GPRs) */
-
-#define r0      0
-#define r1      1
-#define r2      2
-#define r3      3
-#define r4      4
-#define r5      5
-#define r6      6
-#define r7      7
-#define r8      8
-#define r9      9
-#define r10     10
-#define r11     11
-#define r12     12
-#define r13     13
-#define r14     14
-#define r15     15
-#define r16     16
-#define r17     17
-#define r18     18
-#define r19     19
-#define r20     20
-#define r21     21
-#define r22     22
-#define r23     23
-#define r24     24
-#define r25     25
-#define r26     26
-#define r27     27
-#define r28     28
-#define r29     29
-#define r30     30
-#define r31     31
-
-
-/* Floating Point Registers (FPRs) */
-
-#define fr0     0
-#define fr1     1
-#define fr2     2
-#define fr3     3
-#define fr4     4
-#define fr5     5
-#define fr6     6
-#define fr7     7
-#define fr8     8
-#define fr9     9
-#define fr10    10
-#define fr11    11
-#define fr12    12
-#define fr13    13
-#define fr14    14
-#define fr15    15
-#define fr16    16
-#define fr17    17
-#define fr18    18
-#define fr19    19
-#define fr20    20
-#define fr21    21
-#define fr22    22
-#define fr23    23
-#define fr24    24
-#define fr25    25
-#define fr26    26
-#define fr27    27
-#define fr28    28
-#define fr29    29
-#define fr30    30
-#define fr31    31
-
-/* AltiVec Registers (VPRs) */
-
-#define vr0     0
-#define vr1     1
-#define vr2     2
-#define vr3     3
-#define vr4     4
-#define vr5     5
-#define vr6     6
-#define vr7     7
-#define vr8     8
-#define vr9     9
-#define vr10    10
-#define vr11    11
-#define vr12    12
-#define vr13    13
-#define vr14    14
-#define vr15    15
-#define vr16    16
-#define vr17    17
-#define vr18    18
-#define vr19    19
-#define vr20    20
-#define vr21    21
-#define vr22    22
-#define vr23    23
-#define vr24    24
-#define vr25    25
-#define vr26    26
-#define vr27    27
-#define vr28    28
-#define vr29    29
-#define vr30    30
-#define vr31    31
-
-/* VSX Registers (VSRs) */
-
-#define vsr0    0
-#define vsr1    1
-#define vsr2    2
-#define vsr3    3
-#define vsr4    4
-#define vsr5    5
-#define vsr6    6
-#define vsr7    7
-#define vsr8    8
-#define vsr9    9
-#define vsr10   10
-#define vsr11   11
-#define vsr12   12
-#define vsr13   13
-#define vsr14   14
-#define vsr15   15
-#define vsr16   16
-#define vsr17   17
-#define vsr18   18
-#define vsr19   19
-#define vsr20   20
-#define vsr21   21
-#define vsr22   22
-#define vsr23   23
-#define vsr24   24
-#define vsr25   25
-#define vsr26   26
-#define vsr27   27
-#define vsr28   28
-#define vsr29   29
-#define vsr30   30
-#define vsr31   31
-#define vsr32   32
-#define vsr33   33
-#define vsr34   34
-#define vsr35   35
-#define vsr36   36
-#define vsr37   37
-#define vsr38   38
-#define vsr39   39
-#define vsr40   40
-#define vsr41   41
-#define vsr42   42
-#define vsr43   43
-#define vsr44   44
-#define vsr45   45
-#define vsr46   46
-#define vsr47   47
-#define vsr48   48
-#define vsr49   49
-#define vsr50   50
-#define vsr51   51
-#define vsr52   52
-#define vsr53   53
-#define vsr54   54
-#define vsr55   55
-#define vsr56   56
-#define vsr57   57
-#define vsr58   58
-#define vsr59   59
-#define vsr60   60
-#define vsr61   61
-#define vsr62   62
-#define vsr63   63
-
-/* SPE Registers (EVPRs) */
-
-#define evr0    0
-#define evr1    1
-#define evr2    2
-#define evr3    3
-#define evr4    4
-#define evr5    5
-#define evr6    6
-#define evr7    7
-#define evr8    8
-#define evr9    9
-#define evr10   10
-#define evr11   11
-#define evr12   12
-#define evr13   13
-#define evr14   14
-#define evr15   15
-#define evr16   16
-#define evr17   17
-#define evr18   18
-#define evr19   19
-#define evr20   20
-#define evr21   21
-#define evr22   22
-#define evr23   23
-#define evr24   24
-#define evr25   25
-#define evr26   26
-#define evr27   27
-#define evr28   28
-#define evr29   29
-#define evr30   30
-#define evr31   31
-
-/* some stab codes */
-#define N_FUN   36
-#define N_RSYM  64
-#define N_SLINE 68
-#define N_SO    100
-
-#endif /*  __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PPC_ASM_H */
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
deleted file mode 100644
index 101ed87f7d84..000000000000
--- a/include/asm-powerpc/processor.h
+++ /dev/null
@@ -1,314 +0,0 @@
-#ifndef _ASM_POWERPC_PROCESSOR_H
-#define _ASM_POWERPC_PROCESSOR_H
-
-/*
- * Copyright (C) 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/reg.h>
-
-#ifdef CONFIG_VSX
-#define TS_FPRWIDTH 2
-#else
-#define TS_FPRWIDTH 1
-#endif
-
-#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-/* We do _not_ want to define new machine types at all, those must die
- * in favor of using the device-tree
- * -- BenH.
- */
-
-/* PREP sub-platform types see residual.h for these */
-#define _PREP_Motorola  0x01    /* motorola prep */
-#define _PREP_Firm      0x02    /* firmworks prep */
-#define _PREP_IBM       0x00    /* ibm prep */
-#define _PREP_Bull      0x03    /* bull prep */
-
-/* CHRP sub-platform types. These are arbitrary */
-#define _CHRP_Motorola  0x04    /* motorola chrp, the cobra */
-#define _CHRP_IBM       0x05    /* IBM chrp, the longtrail and longtrail 2 */
-#define _CHRP_Pegasos   0x06    /* Genesi/bplan's Pegasos and Pegasos2 */
-#define _CHRP_briq      0x07    /* TotalImpact's briQ */
-
-#if defined(__KERNEL__) && defined(CONFIG_PPC32)
-
-extern int _chrp_type;
-
-#ifdef CONFIG_PPC_PREP
-
-/* what kind of prep workstation we are */
-extern int _prep_type;
-
-#endif /* CONFIG_PPC_PREP */
-
-#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-/* Macros for adjusting thread priority (hardware multi-threading) */
-#define HMT_very_low()   asm volatile("or 31,31,31   # very low priority")
-#define HMT_low()        asm volatile("or 1,1,1      # low priority")
-#define HMT_medium_low() asm volatile("or 6,6,6      # medium low priority")
-#define HMT_medium()     asm volatile("or 2,2,2      # medium priority")
-#define HMT_medium_high() asm volatile("or 5,5,5      # medium high priority")
-#define HMT_high()       asm volatile("or 3,3,3      # high priority")
-
-#ifdef __KERNEL__
-
-extern int have_of;
-
-struct task_struct;
-void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
-void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-extern void prepare_to_copy(struct task_struct *tsk);
-
-/* Create a new kernel thread. */
-extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-extern struct task_struct *last_task_used_altivec;
-extern struct task_struct *last_task_used_vsx;
-extern struct task_struct *last_task_used_spe;
-
-#ifdef CONFIG_PPC32
-
-#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
-#error User TASK_SIZE overlaps with KERNEL_START address
-#endif
-#define TASK_SIZE       (CONFIG_TASK_SIZE)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE      (TASK_SIZE / 8 * 3)
-#endif
-
-#ifdef CONFIG_PPC64
-/* 64-bit user address space is 44-bits (16TB user VM) */
-#define TASK_SIZE_USER64 (0x0000100000000000UL)
-
-/* 
- * 32-bit user address space is 4GB - 1 page 
- * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
- */
-#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE))
-
-#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
-                TASK_SIZE_USER32 : TASK_SIZE_USER64)
-#define TASK_SIZE         TASK_SIZE_OF(current)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
-#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4))
-
-#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \
-                TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
-#endif
-
-#ifdef __KERNEL__
-#ifdef __powerpc64__
-
-#define STACK_TOP_USER64 TASK_SIZE_USER64
-#define STACK_TOP_USER32 TASK_SIZE_USER32
-
-#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
-                   STACK_TOP_USER32 : STACK_TOP_USER64)
-
-#define STACK_TOP_MAX STACK_TOP_USER64
-
-#else /* __powerpc64__ */
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX   STACK_TOP
-
-#endif /* __powerpc64__ */
-#endif /* __KERNEL__ */
-
-typedef struct {
-        unsigned long seg;
-} mm_segment_t;
-
-#define TS_FPROFFSET 0
-#define TS_VSRLOWOFFSET 1
-#define TS_FPR(i) fpr[i][TS_FPROFFSET]
-
-struct thread_struct {
-        unsigned long   ksp;            /* Kernel stack pointer */
-        unsigned long   ksp_limit;      /* if ksp <= ksp_limit stack overflow */
-
-#ifdef CONFIG_PPC64
-        unsigned long   ksp_vsid;
-#endif
-        struct pt_regs  *regs;          /* Pointer to saved register state */
-        mm_segment_t    fs;             /* for get_fs() validation */
-#ifdef CONFIG_PPC32
-        void            *pgdir;         /* root of page-table tree */
-#endif
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-        unsigned long   dbcr0;          /* debug control register values */
-        unsigned long   dbcr1;
-#endif
-        /* FP and VSX 0-31 register set */
-        double          fpr[32][TS_FPRWIDTH];
-        struct {
-
-                unsigned int pad;
-                unsigned int val;       /* Floating point status */
-        } fpscr;
-        int             fpexc_mode;     /* floating-point exception mode */
-        unsigned int    align_ctl;      /* alignment handling control */
-#ifdef CONFIG_PPC64
-        unsigned long   start_tb;       /* Start purr when proc switched in */
-        unsigned long   accum_tb;       /* Total accumilated purr for process */
-#endif
-        unsigned long   dabr;           /* Data address breakpoint register */
-#ifdef CONFIG_ALTIVEC
-        /* Complete AltiVec register set */
-        vector128       vr[32] __attribute__((aligned(16)));
-        /* AltiVec status */
-        vector128       vscr __attribute__((aligned(16)));
-        unsigned long   vrsave;
-        int             used_vr;        /* set if process has used altivec */
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-        /* VSR status */
-        int             used_vsr;       /* set if process has used altivec */
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-        unsigned long   evr[32];        /* upper 32-bits of SPE regs */
-        u64             acc;            /* Accumulator */
-        unsigned long   spefscr;        /* SPE & eFP status */
-        int             used_spe;       /* set if process has used spe */
-#endif /* CONFIG_SPE */
-};
-
-#define ARCH_MIN_TASKALIGN 16
-
-#define INIT_SP         (sizeof(init_stack) + (unsigned long) &init_stack)
-#define INIT_SP_LIMIT \
-        (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
-
-
-#ifdef CONFIG_PPC32
-#define INIT_THREAD { \
-        .ksp = INIT_SP, \
-        .ksp_limit = INIT_SP_LIMIT, \
-        .fs = KERNEL_DS, \
-        .pgdir = swapper_pg_dir, \
-        .fpexc_mode = MSR_FE0 | MSR_FE1, \
-}
-#else
-#define INIT_THREAD  { \
-        .ksp = INIT_SP, \
-        .ksp_limit = INIT_SP_LIMIT, \
-        .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
-        .fs = KERNEL_DS, \
-        .fpr = {{0}}, \
-        .fpscr = { .val = 0, }, \
-        .fpexc_mode = 0, \
-}
-#endif
-
-/*
- * Return saved PC of a blocked thread. For now, this is the "user" PC
- */
-#define thread_saved_pc(tsk)    \
-        ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
-
-#define task_pt_regs(tsk)       ((struct pt_regs *)(tsk)->thread.regs)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
-#define KSTK_ESP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
-
-/* Get/set floating-point exception mode */
-#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr))
-#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val))
-
-extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
-extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
-
-#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr))
-#define SET_ENDIAN(tsk, val) set_endian((tsk), (val))
-
-extern int get_endian(struct task_struct *tsk, unsigned long adr);
-extern int set_endian(struct task_struct *tsk, unsigned int val);
-
-#define GET_UNALIGN_CTL(tsk, adr)       get_unalign_ctl((tsk), (adr))
-#define SET_UNALIGN_CTL(tsk, val)       set_unalign_ctl((tsk), (val))
-
-extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
-extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
-
-static inline unsigned int __unpack_fe01(unsigned long msr_bits)
-{
-        return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
-}
-
-static inline unsigned long __pack_fe01(unsigned int fpmode)
-{
-        return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1);
-}
-
-#ifdef CONFIG_PPC64
-#define cpu_relax()     do { HMT_low(); HMT_medium(); barrier(); } while (0)
-#else
-#define cpu_relax()     barrier()
-#endif
-
-/* Check that a certain kernel stack pointer is valid in task_struct p */
-int validate_sp(unsigned long sp, struct task_struct *p,
-                       unsigned long nbytes);
-
-/*
- * Prefetch macros.
- */
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-static inline void prefetch(const void *x)
-{
-        if (unlikely(!x))
-                return;
-
-        __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x));
-}
-
-static inline void prefetchw(const void *x)
-{
-        if (unlikely(!x))
-                return;
-
-        __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x));
-}
-
-#define spin_lock_prefetch(x)   prefetchw(x)
-
-#ifdef CONFIG_PPC64
-#define HAVE_ARCH_PICK_MMAP_LAYOUT
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
deleted file mode 100644
index eb3bd2e1c7f6..000000000000
--- a/include/asm-powerpc/prom.h
+++ /dev/null
@@ -1,356 +0,0 @@
-#ifndef _POWERPC_PROM_H
-#define _POWERPC_PROM_H
-#ifdef __KERNEL__
-
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/platform_device.h>
-#include <asm/irq.h>
-#include <asm/atomic.h>
-
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
-
-#define of_compat_cmp(s1, s2, l)        strcasecmp((s1), (s2))
-#define of_prop_cmp(s1, s2)             strcmp((s1), (s2))
-#define of_node_cmp(s1, s2)             strcasecmp((s1), (s2))
-
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER            0xd00dfeed      /* marker */
-#define OF_DT_BEGIN_NODE        0x1             /* Start of node, full name */
-#define OF_DT_END_NODE          0x2             /* End node */
-#define OF_DT_PROP              0x3             /* Property: name off, size,
-                                                 * content */
-#define OF_DT_NOP               0x4             /* nop */
-#define OF_DT_END               0x9
-
-#define OF_DT_VERSION           0x10
-
-/*
- * This is what gets passed to the kernel by prom_init or kexec
- *
- * The dt struct contains the device tree structure, full pathes and
- * property contents. The dt strings contain a separate block with just
- * the strings for the property names, and is fully page aligned and
- * self contained in a page, so that it can be kept around by the kernel,
- * each property name appears only once in this page (cheap compression)
- *
- * the mem_rsvmap contains a map of reserved ranges of physical memory,
- * passing it here instead of in the device-tree itself greatly simplifies
- * the job of everybody. It's just a list of u64 pairs (base/size) that
- * ends when size is 0
- */
-struct boot_param_header
-{
-        u32     magic;                  /* magic word OF_DT_HEADER */
-        u32     totalsize;              /* total size of DT block */
-        u32     off_dt_struct;          /* offset to structure */
-        u32     off_dt_strings;         /* offset to strings */
-        u32     off_mem_rsvmap;         /* offset to memory reserve map */
-        u32     version;                /* format version */
-        u32     last_comp_version;      /* last compatible version */
-        /* version 2 fields below */
-        u32     boot_cpuid_phys;        /* Physical CPU id we're booting on */
-        /* version 3 fields below */
-        u32     dt_strings_size;        /* size of the DT strings block */
-        /* version 17 fields below */
-        u32     dt_struct_size;         /* size of the DT structure block */
-};
-
-
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-        char    *name;
-        int     length;
-        void    *value;
-        struct property *next;
-};
-
-struct device_node {
-        const char *name;
-        const char *type;
-        phandle node;
-        phandle linux_phandle;
-        char    *full_name;
-
-        struct  property *properties;
-        struct  property *deadprops; /* removed properties */
-        struct  device_node *parent;
-        struct  device_node *child;
-        struct  device_node *sibling;
-        struct  device_node *next;      /* next device of same type */
-        struct  device_node *allnext;   /* next in list of all nodes */
-        struct  proc_dir_entry *pde;    /* this node's proc directory */
-        struct  kref kref;
-        unsigned long _flags;
-        void    *data;
-};
-
-extern struct device_node *of_chosen;
-
-static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
-{
-        return test_bit(flag, &n->_flags);
-}
-
-static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
-{
-        set_bit(flag, &n->_flags);
-}
-
-
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
-static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-{
-        dn->pde = de;
-}
-
-
-extern struct device_node *of_find_all_nodes(struct device_node *prev);
-extern struct device_node *of_node_get(struct device_node *node);
-extern void of_node_put(struct device_node *node);
-
-/* For scanning the flat device-tree at boot time */
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
-                                            const char *uname, int depth,
-                                            void *data),
-                                  void *data);
-extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
-                                        unsigned long *size);
-extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
-
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-
-/* Other Prototypes */
-extern void finish_device_tree(void);
-extern void unflatten_device_tree(void);
-extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
-extern void print_properties(struct device_node *node);
-extern int prom_n_intr_cells(struct device_node* np);
-extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
-                                struct property *newprop,
-                                struct property *oldprop);
-
-#ifdef CONFIG_PPC32
-/*
- * PCI <-> OF matching functions
- * (XXX should these be here?)
- */
-struct pci_bus;
-struct pci_dev;
-extern int pci_device_from_OF_node(struct device_node *node,
-                                   u8* bus, u8* devfn);
-extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
-extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
-extern void pci_create_OF_bus_map(void);
-#endif
-
-extern struct resource *request_OF_resource(struct device_node* node,
-                                int index, const char* name_postfix);
-extern int release_OF_resource(struct device_node* node, int index);
-
-
-/*
- * OF address retreival & translation
- */
-
-
-/* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const u32 *cell, int size)
-{
-        u64 r = 0;
-        while (size--)
-                r = (r << 32) | *(cell++);
-        return r;
-}
-
-/* Like of_read_number, but we want an unsigned long result */
-#ifdef CONFIG_PPC32
-static inline unsigned long of_read_ulong(const u32 *cell, int size)
-{
-        return cell[size-1];
-}
-#else
-#define of_read_ulong(cell, size)       of_read_number(cell, size)
-#endif
-
-/* Translate an OF address block into a CPU physical address
- */
-extern u64 of_translate_address(struct device_node *np, const u32 *addr);
-
-/* Translate a DMA address from device space to CPU space */
-extern u64 of_translate_dma_address(struct device_node *dev,
-                                    const u32 *in_addr);
-
-/* Extract an address from a device, returns the region size and
- * the address space flags too. The PCI version uses a BAR number
- * instead of an absolute index
- */
-extern const u32 *of_get_address(struct device_node *dev, int index,
-                           u64 *size, unsigned int *flags);
-#ifdef CONFIG_PCI
-extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
-                               u64 *size, unsigned int *flags);
-#else
-static inline const u32 *of_get_pci_address(struct device_node *dev,
-                int bar_no, u64 *size, unsigned int *flags)
-{
-        return NULL;
-}
-#endif /* CONFIG_PCI */
-
-/* Get an address as a resource. Note that if your address is
- * a PIO address, the conversion will fail if the physical address
- * can't be internally converted to an IO token with
- * pci_address_to_pio(), that is because it's either called to early
- * or it can't be matched to any host bridge IO space
- */
-extern int of_address_to_resource(struct device_node *dev, int index,
-                                  struct resource *r);
-#ifdef CONFIG_PCI
-extern int of_pci_address_to_resource(struct device_node *dev, int bar,
-                                      struct resource *r);
-#else
-static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
-                struct resource *r)
-{
-        return -ENOSYS;
-}
-#endif /* CONFIG_PCI */
-
-/* Parse the ibm,dma-window property of an OF node into the busno, phys and
- * size parameters.
- */
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-                unsigned long *busno, unsigned long *phys, unsigned long *size);
-
-extern void kdump_move_device_tree(void);
-
-/* CPU OF node matching */
-struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
-
-/* Get the MAC address */
-extern const void *of_get_mac_address(struct device_node *np);
-
-/*
- * OF interrupt mapping
- */
-
-/* This structure is returned when an interrupt is mapped. The controller
- * field needs to be put() after use
- */
-
-#define OF_MAX_IRQ_SPEC          4 /* We handle specifiers of at most 4 cells */
-
-struct of_irq {
-        struct device_node *controller; /* Interrupt controller node */
-        u32 size;                       /* Specifier size */
-        u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
-};
-
-/**
- * of_irq_map_init - Initialize the irq remapper
- * @flags:      flags defining workarounds to enable
- *
- * Some machines have bugs in the device-tree which require certain workarounds
- * to be applied. Call this before any interrupt mapping attempts to enable
- * those workarounds.
- */
-#define OF_IMAP_OLDWORLD_MAC    0x00000001
-#define OF_IMAP_NO_PHANDLE      0x00000002
-
-extern void of_irq_map_init(unsigned int flags);
-
-/**
- * of_irq_map_raw - Low level interrupt tree parsing
- * @parent:     the device interrupt parent
- * @intspec:    interrupt specifier ("interrupts" property of the device)
- * @ointsize:   size of the passed in interrupt specifier
- * @addr:       address specifier (start of "reg" property of the device)
- * @out_irq:    structure of_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthetized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- *
- */
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
-                          u32 ointsize, const u32 *addr,
-                          struct of_irq *out_irq);
-
-
-/**
- * of_irq_map_one - Resolve an interrupt for a device
- * @device:     the device whose interrupt is to be resolved
- * @index:      index of the interrupt to resolve
- * @out_irq:    structure of_irq filled by this function
- *
- * This function resolves an interrupt, walking the tree, for a given
- * device-tree node. It's the high level pendant to of_irq_map_raw().
- * It also implements the workarounds for OldWolrd Macs.
- */
-extern int of_irq_map_one(struct device_node *device, int index,
-                          struct of_irq *out_irq);
-
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:       the device whose interrupt is to be resolved
- * @out_irq:    structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
-extern int of_irq_to_resource(struct device_node *dev, int index,
-                        struct resource *r);
-
-/**
- * of_iomap - Maps the memory mapped IO for a given device_node
- * @device:     the device whose io range will be mapped
- * @index:      index of the io range
- *
- * Returns a pointer to the mapped memory
- */
-extern void __iomem *of_iomap(struct device_node *device, int index);
-
-/*
- * NB:  This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_PROM_H */
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
deleted file mode 100644
index f9e34c493cbb..000000000000
--- a/include/asm-powerpc/ps3.h
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- *  PS3 platform declarations.
- *
- *  Copyright (C) 2006 Sony Computer Entertainment Inc.
- *  Copyright 2006 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(_ASM_POWERPC_PS3_H)
-#define _ASM_POWERPC_PS3_H
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/device.h>
-#include "cell-pmu.h"
-
-union ps3_firmware_version {
-        u64 raw;
-        struct {
-                u16 pad;
-                u16 major;
-                u16 minor;
-                u16 rev;
-        };
-};
-
-void ps3_get_firmware_version(union ps3_firmware_version *v);
-int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev);
-
-/* 'Other OS' area */
-
-enum ps3_param_av_multi_out {
-        PS3_PARAM_AV_MULTI_OUT_NTSC = 0,
-        PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1,
-        PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2,
-        PS3_PARAM_AV_MULTI_OUT_SECAM = 3,
-};
-
-enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void);
-
-/* dma routines */
-
-enum ps3_dma_page_size {
-        PS3_DMA_4K = 12U,
-        PS3_DMA_64K = 16U,
-        PS3_DMA_1M = 20U,
-        PS3_DMA_16M = 24U,
-};
-
-enum ps3_dma_region_type {
-        PS3_DMA_OTHER = 0,
-        PS3_DMA_INTERNAL = 2,
-};
-
-struct ps3_dma_region_ops;
-
-/**
- * struct ps3_dma_region - A per device dma state variables structure
- * @did: The HV device id.
- * @page_size: The ioc pagesize.
- * @region_type: The HV region type.
- * @bus_addr: The 'translated' bus address of the region.
- * @len: The length in bytes of the region.
- * @offset: The offset from the start of memory of the region.
- * @ioid: The IOID of the device who owns this region
- * @chunk_list: Opaque variable used by the ioc page manager.
- * @region_ops: struct ps3_dma_region_ops - dma region operations
- */
-
-struct ps3_dma_region {
-        struct ps3_system_bus_device *dev;
-        /* device variables */
-        const struct ps3_dma_region_ops *region_ops;
-        unsigned char ioid;
-        enum ps3_dma_page_size page_size;
-        enum ps3_dma_region_type region_type;
-        unsigned long len;
-        unsigned long offset;
-
-        /* driver variables  (set by ps3_dma_region_create) */
-        unsigned long bus_addr;
-        struct {
-                spinlock_t lock;
-                struct list_head head;
-        } chunk_list;
-};
-
-struct ps3_dma_region_ops {
-        int (*create)(struct ps3_dma_region *);
-        int (*free)(struct ps3_dma_region *);
-        int (*map)(struct ps3_dma_region *,
-                   unsigned long virt_addr,
-                   unsigned long len,
-                   unsigned long *bus_addr,
-                   u64 iopte_pp);
-        int (*unmap)(struct ps3_dma_region *,
-                     unsigned long bus_addr,
-                     unsigned long len);
-};
-/**
- * struct ps3_dma_region_init - Helper to initialize structure variables
- *
- * Helper to properly initialize variables prior to calling
- * ps3_system_bus_device_register.
- */
-
-struct ps3_system_bus_device;
-
-int ps3_dma_region_init(struct ps3_system_bus_device *dev,
-        struct ps3_dma_region *r, enum ps3_dma_page_size page_size,
-        enum ps3_dma_region_type region_type, void *addr, unsigned long len);
-int ps3_dma_region_create(struct ps3_dma_region *r);
-int ps3_dma_region_free(struct ps3_dma_region *r);
-int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
-        unsigned long len, unsigned long *bus_addr,
-        u64 iopte_pp);
-int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
-        unsigned long len);
-
-/* mmio routines */
-
-enum ps3_mmio_page_size {
-        PS3_MMIO_4K = 12U,
-        PS3_MMIO_64K = 16U
-};
-
-struct ps3_mmio_region_ops;
-/**
- * struct ps3_mmio_region - a per device mmio state variables structure
- *
- * Current systems can be supported with a single region per device.
- */
-
-struct ps3_mmio_region {
-        struct ps3_system_bus_device *dev;
-        const struct ps3_mmio_region_ops *mmio_ops;
-        unsigned long bus_addr;
-        unsigned long len;
-        enum ps3_mmio_page_size page_size;
-        unsigned long lpar_addr;
-};
-
-struct ps3_mmio_region_ops {
-        int (*create)(struct ps3_mmio_region *);
-        int (*free)(struct ps3_mmio_region *);
-};
-/**
- * struct ps3_mmio_region_init - Helper to initialize structure variables
- *
- * Helper to properly initialize variables prior to calling
- * ps3_system_bus_device_register.
- */
-
-int ps3_mmio_region_init(struct ps3_system_bus_device *dev,
-        struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len,
-        enum ps3_mmio_page_size page_size);
-int ps3_mmio_region_create(struct ps3_mmio_region *r);
-int ps3_free_mmio_region(struct ps3_mmio_region *r);
-unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr);
-
-/* inrerrupt routines */
-
-enum ps3_cpu_binding {
-        PS3_BINDING_CPU_ANY = -1,
-        PS3_BINDING_CPU_0 = 0,
-        PS3_BINDING_CPU_1 = 1,
-};
-
-int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
-        unsigned int *virq);
-int ps3_irq_plug_destroy(unsigned int virq);
-int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq);
-int ps3_event_receive_port_destroy(unsigned int virq);
-int ps3_send_event_locally(unsigned int virq);
-
-int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
-        unsigned int *virq);
-int ps3_io_irq_destroy(unsigned int virq);
-int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
-        unsigned int *virq);
-int ps3_vuart_irq_destroy(unsigned int virq);
-int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
-        unsigned int class, unsigned int *virq);
-int ps3_spe_irq_destroy(unsigned int virq);
-
-int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
-        enum ps3_cpu_binding cpu, unsigned int *virq);
-int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
-        unsigned int virq);
-
-/* lv1 result codes */
-
-enum lv1_result {
-        LV1_SUCCESS                     = 0,
-        /* not used                       -1 */
-        LV1_RESOURCE_SHORTAGE           = -2,
-        LV1_NO_PRIVILEGE                = -3,
-        LV1_DENIED_BY_POLICY            = -4,
-        LV1_ACCESS_VIOLATION            = -5,
-        LV1_NO_ENTRY                    = -6,
-        LV1_DUPLICATE_ENTRY             = -7,
-        LV1_TYPE_MISMATCH               = -8,
-        LV1_BUSY                        = -9,
-        LV1_EMPTY                       = -10,
-        LV1_WRONG_STATE                 = -11,
-        /* not used                       -12 */
-        LV1_NO_MATCH                    = -13,
-        LV1_ALREADY_CONNECTED           = -14,
-        LV1_UNSUPPORTED_PARAMETER_VALUE = -15,
-        LV1_CONDITION_NOT_SATISFIED     = -16,
-        LV1_ILLEGAL_PARAMETER_VALUE     = -17,
-        LV1_BAD_OPTION                  = -18,
-        LV1_IMPLEMENTATION_LIMITATION   = -19,
-        LV1_NOT_IMPLEMENTED             = -20,
-        LV1_INVALID_CLASS_ID            = -21,
-        LV1_CONSTRAINT_NOT_SATISFIED    = -22,
-        LV1_ALIGNMENT_ERROR             = -23,
-        LV1_HARDWARE_ERROR              = -24,
-        LV1_INVALID_DATA_FORMAT         = -25,
-        LV1_INVALID_OPERATION           = -26,
-        LV1_INTERNAL_ERROR              = -32768,
-};
-
-static inline const char* ps3_result(int result)
-{
-#if defined(DEBUG)
-        switch (result) {
-        case LV1_SUCCESS:
-                return "LV1_SUCCESS (0)";
-        case -1:
-                return "** unknown result ** (-1)";
-        case LV1_RESOURCE_SHORTAGE:
-                return "LV1_RESOURCE_SHORTAGE (-2)";
-        case LV1_NO_PRIVILEGE:
-                return "LV1_NO_PRIVILEGE (-3)";
-        case LV1_DENIED_BY_POLICY:
-                return "LV1_DENIED_BY_POLICY (-4)";
-        case LV1_ACCESS_VIOLATION:
-                return "LV1_ACCESS_VIOLATION (-5)";
-        case LV1_NO_ENTRY:
-                return "LV1_NO_ENTRY (-6)";
-        case LV1_DUPLICATE_ENTRY:
-                return "LV1_DUPLICATE_ENTRY (-7)";
-        case LV1_TYPE_MISMATCH:
-                return "LV1_TYPE_MISMATCH (-8)";
-        case LV1_BUSY:
-                return "LV1_BUSY (-9)";
-        case LV1_EMPTY:
-                return "LV1_EMPTY (-10)";
-        case LV1_WRONG_STATE:
-                return "LV1_WRONG_STATE (-11)";
-        case -12:
-                return "** unknown result ** (-12)";
-        case LV1_NO_MATCH:
-                return "LV1_NO_MATCH (-13)";
-        case LV1_ALREADY_CONNECTED:
-                return "LV1_ALREADY_CONNECTED (-14)";
-        case LV1_UNSUPPORTED_PARAMETER_VALUE:
-                return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)";
-        case LV1_CONDITION_NOT_SATISFIED:
-                return "LV1_CONDITION_NOT_SATISFIED (-16)";
-        case LV1_ILLEGAL_PARAMETER_VALUE:
-                return "LV1_ILLEGAL_PARAMETER_VALUE (-17)";
-        case LV1_BAD_OPTION:
-                return "LV1_BAD_OPTION (-18)";
-        case LV1_IMPLEMENTATION_LIMITATION:
-                return "LV1_IMPLEMENTATION_LIMITATION (-19)";
-        case LV1_NOT_IMPLEMENTED:
-                return "LV1_NOT_IMPLEMENTED (-20)";
-        case LV1_INVALID_CLASS_ID:
-                return "LV1_INVALID_CLASS_ID (-21)";
-        case LV1_CONSTRAINT_NOT_SATISFIED:
-                return "LV1_CONSTRAINT_NOT_SATISFIED (-22)";
-        case LV1_ALIGNMENT_ERROR:
-                return "LV1_ALIGNMENT_ERROR (-23)";
-        case LV1_HARDWARE_ERROR:
-                return "LV1_HARDWARE_ERROR (-24)";
-        case LV1_INVALID_DATA_FORMAT:
-                return "LV1_INVALID_DATA_FORMAT (-25)";
-        case LV1_INVALID_OPERATION:
-                return "LV1_INVALID_OPERATION (-26)";
-        case LV1_INTERNAL_ERROR:
-                return "LV1_INTERNAL_ERROR (-32768)";
-        default:
-                BUG();
-                return "** unknown result **";
-        };
-#else
-        return "";
-#endif
-}
-
-/* system bus routines */
-
-enum ps3_match_id {
-        PS3_MATCH_ID_EHCI           = 1,
-        PS3_MATCH_ID_OHCI           = 2,
-        PS3_MATCH_ID_GELIC          = 3,
-        PS3_MATCH_ID_AV_SETTINGS    = 4,
-        PS3_MATCH_ID_SYSTEM_MANAGER = 5,
-        PS3_MATCH_ID_STOR_DISK      = 6,
-        PS3_MATCH_ID_STOR_ROM       = 7,
-        PS3_MATCH_ID_STOR_FLASH     = 8,
-        PS3_MATCH_ID_SOUND          = 9,
-        PS3_MATCH_ID_GRAPHICS       = 10,
-        PS3_MATCH_ID_LPM            = 11,
-};
-
-#define PS3_MODULE_ALIAS_EHCI           "ps3:1"
-#define PS3_MODULE_ALIAS_OHCI           "ps3:2"
-#define PS3_MODULE_ALIAS_GELIC          "ps3:3"
-#define PS3_MODULE_ALIAS_AV_SETTINGS    "ps3:4"
-#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5"
-#define PS3_MODULE_ALIAS_STOR_DISK      "ps3:6"
-#define PS3_MODULE_ALIAS_STOR_ROM       "ps3:7"
-#define PS3_MODULE_ALIAS_STOR_FLASH     "ps3:8"
-#define PS3_MODULE_ALIAS_SOUND          "ps3:9"
-#define PS3_MODULE_ALIAS_GRAPHICS       "ps3:10"
-#define PS3_MODULE_ALIAS_LPM            "ps3:11"
-
-enum ps3_system_bus_device_type {
-        PS3_DEVICE_TYPE_IOC0 = 1,
-        PS3_DEVICE_TYPE_SB,
-        PS3_DEVICE_TYPE_VUART,
-        PS3_DEVICE_TYPE_LPM,
-};
-
-enum ps3_match_sub_id {
-        /* for PS3_MATCH_ID_GRAPHICS */
-        PS3_MATCH_SUB_ID_FB             = 1,
-};
-
-/**
- * struct ps3_system_bus_device - a device on the system bus
- */
-
-struct ps3_system_bus_device {
-        enum ps3_match_id match_id;
-        enum ps3_match_sub_id match_sub_id;
-        enum ps3_system_bus_device_type dev_type;
-
-        u64 bus_id;                       /* SB */
-        u64 dev_id;                       /* SB */
-        unsigned int interrupt_id;        /* SB */
-        struct ps3_dma_region *d_region;  /* SB, IOC0 */
-        struct ps3_mmio_region *m_region; /* SB, IOC0*/
-        unsigned int port_number;         /* VUART */
-        struct {                          /* LPM */
-                u64 node_id;
-                u64 pu_id;
-                u64 rights;
-        } lpm;
-
-/*      struct iommu_table *iommu_table; -- waiting for BenH's cleanups */
-        struct device core;
-        void *driver_priv; /* private driver variables */
-};
-
-int ps3_open_hv_device(struct ps3_system_bus_device *dev);
-int ps3_close_hv_device(struct ps3_system_bus_device *dev);
-
-/**
- * struct ps3_system_bus_driver - a driver for a device on the system bus
- */
-
-struct ps3_system_bus_driver {
-        enum ps3_match_id match_id;
-        enum ps3_match_sub_id match_sub_id;
-        struct device_driver core;
-        int (*probe)(struct ps3_system_bus_device *);
-        int (*remove)(struct ps3_system_bus_device *);
-        int (*shutdown)(struct ps3_system_bus_device *);
-/*      int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */
-/*      int (*resume)(struct ps3_system_bus_device *); */
-};
-
-int ps3_system_bus_device_register(struct ps3_system_bus_device *dev);
-int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv);
-void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv);
-
-static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv(
-        struct device_driver *_drv)
-{
-        return container_of(_drv, struct ps3_system_bus_driver, core);
-}
-static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev(
-        struct device *_dev)
-{
-        return container_of(_dev, struct ps3_system_bus_device, core);
-}
-static inline struct ps3_system_bus_driver *
-        ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev)
-{
-        BUG_ON(!_dev);
-        BUG_ON(!_dev->core.driver);
-        return ps3_drv_to_system_bus_drv(_dev->core.driver);
-}
-
-/**
- * ps3_system_bus_set_drvdata -
- * @dev: device structure
- * @data: Data to set
- */
-
-static inline void ps3_system_bus_set_driver_data(
-        struct ps3_system_bus_device *dev, void *data)
-{
-        dev->core.driver_data = data;
-}
-static inline void *ps3_system_bus_get_driver_data(
-        struct ps3_system_bus_device *dev)
-{
-        return dev->core.driver_data;
-}
-
-/* These two need global scope for get_dma_ops(). */
-
-extern struct bus_type ps3_system_bus_type;
-
-/* system manager */
-
-struct ps3_sys_manager_ops {
-        struct ps3_system_bus_device *dev;
-        void (*power_off)(struct ps3_system_bus_device *dev);
-        void (*restart)(struct ps3_system_bus_device *dev);
-};
-
-void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
-void __noreturn ps3_sys_manager_power_off(void);
-void __noreturn ps3_sys_manager_restart(void);
-void __noreturn ps3_sys_manager_halt(void);
-int ps3_sys_manager_get_wol(void);
-void ps3_sys_manager_set_wol(int state);
-
-struct ps3_prealloc {
-    const char *name;
-    void *address;
-    unsigned long size;
-    unsigned long align;
-};
-
-extern struct ps3_prealloc ps3fb_videomemory;
-extern struct ps3_prealloc ps3flash_bounce_buffer;
-
-/* logical performance monitor */
-
-/**
- * enum ps3_lpm_rights - Rigths granted by the system policy module.
- *
- * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm.
- * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer.
- */
-
-enum ps3_lpm_rights {
-        PS3_LPM_RIGHTS_USE_LPM = 0x001,
-        PS3_LPM_RIGHTS_USE_TB = 0x100,
-};
-
-/**
- * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use.
- *
- * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer.
- * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer.  Must have
- *  rights @PS3_LPM_RIGHTS_USE_TB.
- */
-
-enum ps3_lpm_tb_type {
-        PS3_LPM_TB_TYPE_NONE = 0,
-        PS3_LPM_TB_TYPE_INTERNAL = 1,
-};
-
-int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache,
-        u64 tb_cache_size);
-int ps3_lpm_close(void);
-int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count,
-        unsigned long *bytes_copied);
-int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
-        unsigned long count, unsigned long *bytes_copied);
-void ps3_set_bookmark(u64 bookmark);
-void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id);
-int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit,
-        u8 bus_word);
-
-u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr);
-void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
-u32 ps3_read_ctr(u32 cpu, u32 ctr);
-void ps3_write_ctr(u32 cpu, u32 ctr, u32 val);
-
-u32 ps3_read_pm07_control(u32 cpu, u32 ctr);
-void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val);
-u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg);
-void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
-
-u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr);
-void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
-
-void ps3_enable_pm(u32 cpu);
-void ps3_disable_pm(u32 cpu);
-void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
-void ps3_disable_pm_interrupts(u32 cpu);
-
-u32 ps3_get_and_clear_pm_interrupts(u32 cpu);
-void ps3_sync_irq(int node);
-u32 ps3_get_hw_thread_id(int cpu);
-u64 ps3_get_spe_id(void *arg);
-
-#endif
diff --git a/include/asm-powerpc/ps3av.h b/include/asm-powerpc/ps3av.h
deleted file mode 100644
index fda98715cd35..000000000000
--- a/include/asm-powerpc/ps3av.h
+++ /dev/null
@@ -1,744 +0,0 @@
-/*
- *  PS3 AV backend support.
- *
- *  Copyright (C) 2007 Sony Computer Entertainment Inc.
- *  Copyright 2007 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _ASM_POWERPC_PS3AV_H_
-#define _ASM_POWERPC_PS3AV_H_
-
-/** command for ioctl() **/
-#define PS3AV_VERSION 0x205     /* version of ps3av command */
-
-#define PS3AV_CID_AV_INIT              0x00000001
-#define PS3AV_CID_AV_FIN               0x00000002
-#define PS3AV_CID_AV_GET_HW_CONF       0x00000003
-#define PS3AV_CID_AV_GET_MONITOR_INFO  0x00000004
-#define PS3AV_CID_AV_ENABLE_EVENT      0x00000006
-#define PS3AV_CID_AV_DISABLE_EVENT     0x00000007
-#define PS3AV_CID_AV_TV_MUTE           0x0000000a
-
-#define PS3AV_CID_AV_VIDEO_CS          0x00010001
-#define PS3AV_CID_AV_VIDEO_MUTE        0x00010002
-#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003
-#define PS3AV_CID_AV_AUDIO_PARAM       0x00020001
-#define PS3AV_CID_AV_AUDIO_MUTE        0x00020002
-#define PS3AV_CID_AV_HDMI_MODE         0x00040001
-
-#define PS3AV_CID_VIDEO_INIT           0x01000001
-#define PS3AV_CID_VIDEO_MODE           0x01000002
-#define PS3AV_CID_VIDEO_FORMAT         0x01000004
-#define PS3AV_CID_VIDEO_PITCH          0x01000005
-
-#define PS3AV_CID_AUDIO_INIT           0x02000001
-#define PS3AV_CID_AUDIO_MODE           0x02000002
-#define PS3AV_CID_AUDIO_MUTE           0x02000003
-#define PS3AV_CID_AUDIO_ACTIVE         0x02000004
-#define PS3AV_CID_AUDIO_INACTIVE       0x02000005
-#define PS3AV_CID_AUDIO_SPDIF_BIT      0x02000006
-#define PS3AV_CID_AUDIO_CTRL           0x02000007
-
-#define PS3AV_CID_EVENT_UNPLUGGED      0x10000001
-#define PS3AV_CID_EVENT_PLUGGED        0x10000002
-#define PS3AV_CID_EVENT_HDCP_DONE      0x10000003
-#define PS3AV_CID_EVENT_HDCP_FAIL      0x10000004
-#define PS3AV_CID_EVENT_HDCP_AUTH      0x10000005
-#define PS3AV_CID_EVENT_HDCP_ERROR     0x10000006
-
-#define PS3AV_CID_AVB_PARAM            0x04000001
-
-/* max backend ports */
-#define PS3AV_HDMI_MAX                 2        /* HDMI_0 HDMI_1 */
-#define PS3AV_AVMULTI_MAX              1        /* AVMULTI_0 */
-#define PS3AV_AV_PORT_MAX              (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX)
-#define PS3AV_OPT_PORT_MAX             1        /* SPDIF0 */
-#define PS3AV_HEAD_MAX                 2        /* HEAD_A HEAD_B */
-
-/* num of pkt for PS3AV_CID_AVB_PARAM */
-#define PS3AV_AVB_NUM_VIDEO            PS3AV_HEAD_MAX
-#define PS3AV_AVB_NUM_AUDIO            0        /* not supported */
-#define PS3AV_AVB_NUM_AV_VIDEO         PS3AV_AV_PORT_MAX
-#define PS3AV_AVB_NUM_AV_AUDIO         PS3AV_HDMI_MAX
-
-#define PS3AV_MUTE_PORT_MAX            1        /* num of ports in mute pkt */
-
-/* event_bit */
-#define PS3AV_CMD_EVENT_BIT_UNPLUGGED                   (1 << 0)
-#define PS3AV_CMD_EVENT_BIT_PLUGGED                     (1 << 1)
-#define PS3AV_CMD_EVENT_BIT_HDCP_DONE                   (1 << 2)
-#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL                   (1 << 3)
-#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH                 (1 << 4)
-#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY               (1 << 5)
-
-/* common params */
-/* mute */
-#define PS3AV_CMD_MUTE_OFF                              0x0000
-#define PS3AV_CMD_MUTE_ON                               0x0001
-/* avport */
-#define PS3AV_CMD_AVPORT_HDMI_0                         0x0000
-#define PS3AV_CMD_AVPORT_HDMI_1                         0x0001
-#define PS3AV_CMD_AVPORT_AVMULTI_0                      0x0010
-#define PS3AV_CMD_AVPORT_SPDIF_0                        0x0020
-#define PS3AV_CMD_AVPORT_SPDIF_1                        0x0021
-
-/* for av backend */
-/* av_mclk */
-#define PS3AV_CMD_AV_MCLK_128                           0x0000
-#define PS3AV_CMD_AV_MCLK_256                           0x0001
-#define PS3AV_CMD_AV_MCLK_512                           0x0003
-/* av_inputlen */
-#define PS3AV_CMD_AV_INPUTLEN_16                        0x02
-#define PS3AV_CMD_AV_INPUTLEN_20                        0x0a
-#define PS3AV_CMD_AV_INPUTLEN_24                        0x0b
-/* alayout */
-#define PS3AV_CMD_AV_LAYOUT_32                          (1 << 0)
-#define PS3AV_CMD_AV_LAYOUT_44                          (1 << 1)
-#define PS3AV_CMD_AV_LAYOUT_48                          (1 << 2)
-#define PS3AV_CMD_AV_LAYOUT_88                          (1 << 3)
-#define PS3AV_CMD_AV_LAYOUT_96                          (1 << 4)
-#define PS3AV_CMD_AV_LAYOUT_176                         (1 << 5)
-#define PS3AV_CMD_AV_LAYOUT_192                         (1 << 6)
-/* hdmi_mode */
-#define PS3AV_CMD_AV_HDMI_MODE_NORMAL                   0xff
-#define PS3AV_CMD_AV_HDMI_HDCP_OFF                      0x01
-#define PS3AV_CMD_AV_HDMI_EDID_PASS                     0x80
-#define PS3AV_CMD_AV_HDMI_DVI                           0x40
-
-/* for video module */
-/* video_head */
-#define PS3AV_CMD_VIDEO_HEAD_A                          0x0000
-#define PS3AV_CMD_VIDEO_HEAD_B                          0x0001
-/* video_cs_out video_cs_in */
-#define PS3AV_CMD_VIDEO_CS_NONE                         0x0000
-#define PS3AV_CMD_VIDEO_CS_RGB_8                        0x0001
-#define PS3AV_CMD_VIDEO_CS_YUV444_8                     0x0002
-#define PS3AV_CMD_VIDEO_CS_YUV422_8                     0x0003
-#define PS3AV_CMD_VIDEO_CS_XVYCC_8                      0x0004
-#define PS3AV_CMD_VIDEO_CS_RGB_10                       0x0005
-#define PS3AV_CMD_VIDEO_CS_YUV444_10                    0x0006
-#define PS3AV_CMD_VIDEO_CS_YUV422_10                    0x0007
-#define PS3AV_CMD_VIDEO_CS_XVYCC_10                     0x0008
-#define PS3AV_CMD_VIDEO_CS_RGB_12                       0x0009
-#define PS3AV_CMD_VIDEO_CS_YUV444_12                    0x000a
-#define PS3AV_CMD_VIDEO_CS_YUV422_12                    0x000b
-#define PS3AV_CMD_VIDEO_CS_XVYCC_12                     0x000c
-/* video_vid */
-#define PS3AV_CMD_VIDEO_VID_NONE                        0x0000
-#define PS3AV_CMD_VIDEO_VID_480I                        0x0001
-#define PS3AV_CMD_VIDEO_VID_576I                        0x0003
-#define PS3AV_CMD_VIDEO_VID_480P                        0x0005
-#define PS3AV_CMD_VIDEO_VID_576P                        0x0006
-#define PS3AV_CMD_VIDEO_VID_1080I_60HZ                  0x0007
-#define PS3AV_CMD_VIDEO_VID_1080I_50HZ                  0x0008
-#define PS3AV_CMD_VIDEO_VID_720P_60HZ                   0x0009
-#define PS3AV_CMD_VIDEO_VID_720P_50HZ                   0x000a
-#define PS3AV_CMD_VIDEO_VID_1080P_60HZ                  0x000b
-#define PS3AV_CMD_VIDEO_VID_1080P_50HZ                  0x000c
-#define PS3AV_CMD_VIDEO_VID_WXGA                        0x000d
-#define PS3AV_CMD_VIDEO_VID_SXGA                        0x000e
-#define PS3AV_CMD_VIDEO_VID_WUXGA                       0x000f
-#define PS3AV_CMD_VIDEO_VID_480I_A                      0x0010
-/* video_format */
-#define PS3AV_CMD_VIDEO_FORMAT_BLACK                    0x0000
-#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT                0x0007
-/* video_order */
-#define PS3AV_CMD_VIDEO_ORDER_RGB                       0x0000
-#define PS3AV_CMD_VIDEO_ORDER_BGR                       0x0001
-/* video_fmt */
-#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8                    0x0000
-/* video_out_format */
-#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT            0x0000
-/* video_cl_cnv */
-#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT               0x0000
-#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT              0x0010
-/* video_sync */
-#define PS3AV_CMD_VIDEO_SYNC_VSYNC                      0x0001
-#define PS3AV_CMD_VIDEO_SYNC_CSYNC                      0x0004
-#define PS3AV_CMD_VIDEO_SYNC_HSYNC                      0x0010
-
-/* for audio module */
-/* num_of_ch */
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_2                     0x0000
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_3                     0x0001
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_4                     0x0002
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_5                     0x0003
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_6                     0x0004
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_7                     0x0005
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_8                     0x0006
-/* audio_fs */
-#define PS3AV_CMD_AUDIO_FS_32K                          0x0001
-#define PS3AV_CMD_AUDIO_FS_44K                          0x0002
-#define PS3AV_CMD_AUDIO_FS_48K                          0x0003
-#define PS3AV_CMD_AUDIO_FS_88K                          0x0004
-#define PS3AV_CMD_AUDIO_FS_96K                          0x0005
-#define PS3AV_CMD_AUDIO_FS_176K                         0x0006
-#define PS3AV_CMD_AUDIO_FS_192K                         0x0007
-/* audio_word_bits */
-#define PS3AV_CMD_AUDIO_WORD_BITS_16                    0x0001
-#define PS3AV_CMD_AUDIO_WORD_BITS_20                    0x0002
-#define PS3AV_CMD_AUDIO_WORD_BITS_24                    0x0003
-/* audio_format */
-#define PS3AV_CMD_AUDIO_FORMAT_PCM                      0x0001
-#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM                0x00ff
-/* audio_source */
-#define PS3AV_CMD_AUDIO_SOURCE_SERIAL                   0x0000
-#define PS3AV_CMD_AUDIO_SOURCE_SPDIF                    0x0001
-/* audio_swap */
-#define PS3AV_CMD_AUDIO_SWAP_0                          0x0000
-#define PS3AV_CMD_AUDIO_SWAP_1                          0x0000
-/* audio_map */
-#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0                    0x0000
-#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1                    0x0001
-#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2                    0x0002
-#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3                    0x0003
-/* audio_layout */
-#define PS3AV_CMD_AUDIO_LAYOUT_2CH                      0x0000
-#define PS3AV_CMD_AUDIO_LAYOUT_6CH                      0x000b  /* LREClr */
-#define PS3AV_CMD_AUDIO_LAYOUT_8CH                      0x001f  /* LREClrXY */
-/* audio_downmix */
-#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED               0x0000
-#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED              0x0001
-
-/* audio_port */
-#define PS3AV_CMD_AUDIO_PORT_HDMI_0                     ( 1 << 0 )
-#define PS3AV_CMD_AUDIO_PORT_HDMI_1                     ( 1 << 1 )
-#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0                  ( 1 << 10 )
-#define PS3AV_CMD_AUDIO_PORT_SPDIF_0                    ( 1 << 20 )
-#define PS3AV_CMD_AUDIO_PORT_SPDIF_1                    ( 1 << 21 )
-
-/* audio_ctrl_id */
-#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET               0x0000
-#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS         0x0001
-#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK                   0x0002
-/* audio_ctrl_data[0] reset */
-#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE               0x0000
-#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT               0x0001
-/* audio_ctrl_data[0] de-emphasis */
-#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF            0x0000
-#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON             0x0001
-/* audio_ctrl_data[0] avclk */
-#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22                   0x0000
-#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18                   0x0001
-
-/* av_vid */
-/* do not use these params directly, use vid_video2av */
-#define PS3AV_CMD_AV_VID_480I                           0x0000
-#define PS3AV_CMD_AV_VID_480P                           0x0001
-#define PS3AV_CMD_AV_VID_720P_60HZ                      0x0002
-#define PS3AV_CMD_AV_VID_1080I_60HZ                     0x0003
-#define PS3AV_CMD_AV_VID_1080P_60HZ                     0x0004
-#define PS3AV_CMD_AV_VID_576I                           0x0005
-#define PS3AV_CMD_AV_VID_576P                           0x0006
-#define PS3AV_CMD_AV_VID_720P_50HZ                      0x0007
-#define PS3AV_CMD_AV_VID_1080I_50HZ                     0x0008
-#define PS3AV_CMD_AV_VID_1080P_50HZ                     0x0009
-#define PS3AV_CMD_AV_VID_WXGA                           0x000a
-#define PS3AV_CMD_AV_VID_SXGA                           0x000b
-#define PS3AV_CMD_AV_VID_WUXGA                          0x000c
-/* av_cs_out av_cs_in */
-/* use cs_video2av() */
-#define PS3AV_CMD_AV_CS_RGB_8                           0x0000
-#define PS3AV_CMD_AV_CS_YUV444_8                        0x0001
-#define PS3AV_CMD_AV_CS_YUV422_8                        0x0002
-#define PS3AV_CMD_AV_CS_XVYCC_8                         0x0003
-#define PS3AV_CMD_AV_CS_RGB_10                          0x0004
-#define PS3AV_CMD_AV_CS_YUV444_10                       0x0005
-#define PS3AV_CMD_AV_CS_YUV422_10                       0x0006
-#define PS3AV_CMD_AV_CS_XVYCC_10                        0x0007
-#define PS3AV_CMD_AV_CS_RGB_12                          0x0008
-#define PS3AV_CMD_AV_CS_YUV444_12                       0x0009
-#define PS3AV_CMD_AV_CS_YUV422_12                       0x000a
-#define PS3AV_CMD_AV_CS_XVYCC_12                        0x000b
-#define PS3AV_CMD_AV_CS_8                               0x0000
-#define PS3AV_CMD_AV_CS_10                              0x0001
-#define PS3AV_CMD_AV_CS_12                              0x0002
-/* dither */
-#define PS3AV_CMD_AV_DITHER_OFF                         0x0000
-#define PS3AV_CMD_AV_DITHER_ON                          0x0001
-#define PS3AV_CMD_AV_DITHER_8BIT                        0x0000
-#define PS3AV_CMD_AV_DITHER_10BIT                       0x0002
-#define PS3AV_CMD_AV_DITHER_12BIT                       0x0004
-/* super_white */
-#define PS3AV_CMD_AV_SUPER_WHITE_OFF                    0x0000
-#define PS3AV_CMD_AV_SUPER_WHITE_ON                     0x0001
-/* aspect */
-#define PS3AV_CMD_AV_ASPECT_16_9                        0x0000
-#define PS3AV_CMD_AV_ASPECT_4_3                         0x0001
-/* video_cs_cnv() */
-#define PS3AV_CMD_VIDEO_CS_RGB                          0x0001
-#define PS3AV_CMD_VIDEO_CS_YUV422                       0x0002
-#define PS3AV_CMD_VIDEO_CS_YUV444                       0x0003
-
-/* for broadcast automode */
-#define PS3AV_RESBIT_720x480P                   0x0003  /* 0x0001 | 0x0002 */
-#define PS3AV_RESBIT_720x576P                   0x0003  /* 0x0001 | 0x0002 */
-#define PS3AV_RESBIT_1280x720P                  0x0004
-#define PS3AV_RESBIT_1920x1080I                 0x0008
-#define PS3AV_RESBIT_1920x1080P                 0x4000
-#define PS3AV_RES_MASK_60                       (PS3AV_RESBIT_720x480P \
-                                                | PS3AV_RESBIT_1280x720P \
-                                                | PS3AV_RESBIT_1920x1080I \
-                                                | PS3AV_RESBIT_1920x1080P)
-#define PS3AV_RES_MASK_50                       (PS3AV_RESBIT_720x576P \
-                                                | PS3AV_RESBIT_1280x720P \
-                                                | PS3AV_RESBIT_1920x1080I \
-                                                | PS3AV_RESBIT_1920x1080P)
-
-/* for VESA automode */
-#define PS3AV_RESBIT_VGA                        0x0001
-#define PS3AV_RESBIT_WXGA                       0x0002
-#define PS3AV_RESBIT_SXGA                       0x0004
-#define PS3AV_RESBIT_WUXGA                      0x0008
-#define PS3AV_RES_MASK_VESA                     (PS3AV_RESBIT_WXGA |\
-                                                 PS3AV_RESBIT_SXGA |\
-                                                 PS3AV_RESBIT_WUXGA)
-
-#define PS3AV_MONITOR_TYPE_HDMI                 1       /* HDMI */
-#define PS3AV_MONITOR_TYPE_DVI                  2       /* DVI */
-
-
-/* for video mode */
-enum ps3av_mode_num {
-        PS3AV_MODE_AUTO                         = 0,
-        PS3AV_MODE_480I                         = 1,
-        PS3AV_MODE_480P                         = 2,
-        PS3AV_MODE_720P60                       = 3,
-        PS3AV_MODE_1080I60                      = 4,
-        PS3AV_MODE_1080P60                      = 5,
-        PS3AV_MODE_576I                         = 6,
-        PS3AV_MODE_576P                         = 7,
-        PS3AV_MODE_720P50                       = 8,
-        PS3AV_MODE_1080I50                      = 9,
-        PS3AV_MODE_1080P50                      = 10,
-        PS3AV_MODE_WXGA                         = 11,
-        PS3AV_MODE_SXGA                         = 12,
-        PS3AV_MODE_WUXGA                        = 13,
-};
-
-#define PS3AV_MODE_MASK                         0x000F
-#define PS3AV_MODE_HDCP_OFF                     0x1000  /* Retail PS3 product doesn't support this */
-#define PS3AV_MODE_DITHER                       0x0800
-#define PS3AV_MODE_COLOR                        0x0400
-#define PS3AV_MODE_WHITE                        0x0200
-#define PS3AV_MODE_FULL                         0x0080
-#define PS3AV_MODE_DVI                          0x0040
-#define PS3AV_MODE_RGB                          0x0020
-
-
-#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60       PS3AV_MODE_480P
-#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60    PS3AV_MODE_480I
-#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50       PS3AV_MODE_576P
-#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50    PS3AV_MODE_576I
-
-#define PS3AV_REGION_60                         0x01
-#define PS3AV_REGION_50                         0x02
-#define PS3AV_REGION_RGB                        0x10
-
-#define get_status(buf)                         (((__u32 *)buf)[2])
-#define PS3AV_HDR_SIZE                          4       /* version + size */
-
-
-/** command packet structure **/
-struct ps3av_send_hdr {
-        u16 version;
-        u16 size;               /* size of command packet */
-        u32 cid;                /* command id */
-};
-
-struct ps3av_reply_hdr {
-        u16 version;
-        u16 size;
-        u32 cid;
-        u32 status;
-};
-
-/* backend: initialization */
-struct ps3av_pkt_av_init {
-        struct ps3av_send_hdr send_hdr;
-        u32 event_bit;
-};
-
-/* backend: finalize */
-struct ps3av_pkt_av_fin {
-        struct ps3av_send_hdr send_hdr;
-        /* recv */
-        u32 reserved;
-};
-
-/* backend: get port */
-struct ps3av_pkt_av_get_hw_conf {
-        struct ps3av_send_hdr send_hdr;
-        /* recv */
-        u32 status;
-        u16 num_of_hdmi;        /* out: number of hdmi */
-        u16 num_of_avmulti;     /* out: number of avmulti */
-        u16 num_of_spdif;       /* out: number of hdmi */
-        u16 reserved;
-};
-
-/* backend: get monitor info */
-struct ps3av_info_resolution {
-        u32 res_bits;
-        u32 native;
-};
-
-struct ps3av_info_cs {
-        u8 rgb;
-        u8 yuv444;
-        u8 yuv422;
-        u8 reserved;
-};
-
-struct ps3av_info_color {
-        u16 red_x;
-        u16 red_y;
-        u16 green_x;
-        u16 green_y;
-        u16 blue_x;
-        u16 blue_y;
-        u16 white_x;
-        u16 white_y;
-        u32 gamma;
-};
-
-struct ps3av_info_audio {
-        u8 type;
-        u8 max_num_of_ch;
-        u8 fs;
-        u8 sbit;
-};
-
-struct ps3av_info_monitor {
-        u8 avport;
-        u8 monitor_id[10];
-        u8 monitor_type;
-        u8 monitor_name[16];
-        struct ps3av_info_resolution res_60;
-        struct ps3av_info_resolution res_50;
-        struct ps3av_info_resolution res_other;
-        struct ps3av_info_resolution res_vesa;
-        struct ps3av_info_cs cs;
-        struct ps3av_info_color color;
-        u8 supported_ai;
-        u8 speaker_info;
-        u8 num_of_audio_block;
-        struct ps3av_info_audio audio[0];       /* 0 or more audio blocks */
-        u8 reserved[169];
-} __attribute__ ((packed));
-
-struct ps3av_pkt_av_get_monitor_info {
-        struct ps3av_send_hdr send_hdr;
-        u16 avport;             /* in: avport */
-        u16 reserved;
-        /* recv */
-        struct ps3av_info_monitor info; /* out: monitor info */
-};
-
-/* backend: enable/disable event */
-struct ps3av_pkt_av_event {
-        struct ps3av_send_hdr send_hdr;
-        u32 event_bit;          /* in */
-};
-
-/* backend: video cs param */
-struct ps3av_pkt_av_video_cs {
-        struct ps3av_send_hdr send_hdr;
-        u16 avport;             /* in: avport */
-        u16 av_vid;             /* in: video resolution */
-        u16 av_cs_out;          /* in: output color space */
-        u16 av_cs_in;           /* in: input color space */
-        u8 dither;              /* in: dither bit length */
-        u8 bitlen_out;          /* in: bit length */
-        u8 super_white;         /* in: super white */
-        u8 aspect;              /* in: aspect ratio */
-};
-
-/* backend: video mute */
-struct ps3av_av_mute {
-        u16 avport;             /* in: avport */
-        u16 mute;               /* in: mute on/off */
-};
-
-struct ps3av_pkt_av_video_mute {
-        struct ps3av_send_hdr send_hdr;
-        struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
-};
-
-/* backend: video disable signal */
-struct ps3av_pkt_av_video_disable_sig {
-        struct ps3av_send_hdr send_hdr;
-        u16 avport;             /* in: avport */
-        u16 reserved;
-};
-
-/* backend: audio param */
-struct ps3av_audio_info_frame {
-        struct pb1_bit {
-                u8 ct:4;
-                u8 rsv:1;
-                u8 cc:3;
-        } pb1;
-        struct pb2_bit {
-                u8 rsv:3;
-                u8 sf:3;
-                u8 ss:2;
-        } pb2;
-        u8 pb3;
-        u8 pb4;
-        struct pb5_bit {
-                u8 dm:1;
-                u8 lsv:4;
-                u8 rsv:3;
-        } pb5;
-};
-
-struct ps3av_pkt_av_audio_param {
-        struct ps3av_send_hdr send_hdr;
-        u16 avport;             /* in: avport */
-        u16 reserved;
-        u8 mclk;                /* in: audio mclk */
-        u8 ns[3];               /* in: audio ns val */
-        u8 enable;              /* in: audio enable */
-        u8 swaplr;              /* in: audio swap */
-        u8 fifomap;             /* in: audio fifomap */
-        u8 inputctrl;           /* in: audio input ctrl */
-        u8 inputlen;            /* in: sample bit size */
-        u8 layout;              /* in: speaker layout param */
-        struct ps3av_audio_info_frame info;     /* in: info */
-        u8 chstat[5];           /* in: ch stat */
-};
-
-/* backend: audio_mute */
-struct ps3av_pkt_av_audio_mute {
-        struct ps3av_send_hdr send_hdr;
-        struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
-};
-
-/* backend: hdmi_mode */
-struct ps3av_pkt_av_hdmi_mode {
-        struct ps3av_send_hdr send_hdr;
-        u8 mode;                /* in: hdmi_mode */
-        u8 reserved0;
-        u8 reserved1;
-        u8 reserved2;
-};
-
-/* backend: tv_mute */
-struct ps3av_pkt_av_tv_mute {
-        struct ps3av_send_hdr send_hdr;
-        u16 avport;             /* in: avport HDMI only */
-        u16 mute;               /* in: mute */
-};
-
-/* video: initialize */
-struct ps3av_pkt_video_init {
-        struct ps3av_send_hdr send_hdr;
-        /* recv */
-        u32 reserved;
-};
-
-/* video: mode setting */
-struct ps3av_pkt_video_mode {
-        struct ps3av_send_hdr send_hdr;
-        u32 video_head;         /* in: head */
-        u32 reserved;
-        u32 video_vid;          /* in: video resolution */
-        u16 reserved1;
-        u16 width;              /* in: width in pixel */
-        u16 reserved2;
-        u16 height;             /* in: height in pixel */
-        u32 pitch;              /* in: line size in byte */
-        u32 video_out_format;   /* in: out format */
-        u32 video_format;       /* in: input frame buffer format */
-        u8 reserved3;
-        u8 video_cl_cnv;        /* in: color conversion */
-        u16 video_order;        /* in: input RGB order */
-        u32 reserved4;
-};
-
-/* video: format */
-struct ps3av_pkt_video_format {
-        struct ps3av_send_hdr send_hdr;
-        u32 video_head;         /* in: head */
-        u32 video_format;       /* in: frame buffer format */
-        u8 reserved;
-        u8 video_cl_cnv;        /* in: color conversion */
-        u16 video_order;        /* in: input RGB order */
-};
-
-/* video: pitch */
-struct ps3av_pkt_video_pitch {
-        u16 version;
-        u16 size;               /* size of command packet */
-        u32 cid;                /* command id */
-        u32 video_head;         /* in: head */
-        u32 pitch;              /* in: line size in byte */
-};
-
-/* audio: initialize */
-struct ps3av_pkt_audio_init {
-        struct ps3av_send_hdr send_hdr;
-        /* recv */
-        u32 reserved;
-};
-
-/* audio: mode setting */
-struct ps3av_pkt_audio_mode {
-        struct ps3av_send_hdr send_hdr;
-        u8 avport;              /* in: avport */
-        u8 reserved0[3];
-        u32 mask;               /* in: mask */
-        u32 audio_num_of_ch;    /* in: number of ch */
-        u32 audio_fs;           /* in: sampling freq */
-        u32 audio_word_bits;    /* in: sample bit size */
-        u32 audio_format;       /* in: audio output format */
-        u32 audio_source;       /* in: audio source */
-        u8 audio_enable[4];     /* in: audio enable */
-        u8 audio_swap[4];       /* in: audio swap */
-        u8 audio_map[4];        /* in: audio map */
-        u32 audio_layout;       /* in: speaker layout */
-        u32 audio_downmix;      /* in: audio downmix permission */
-        u32 audio_downmix_level;
-        u8 audio_cs_info[8];    /* in: IEC channel status */
-};
-
-/* audio: mute */
-struct ps3av_audio_mute {
-        u8 avport;              /* in: opt_port optical */
-        u8 reserved[3];
-        u32 mute;               /* in: mute */
-};
-
-struct ps3av_pkt_audio_mute {
-        struct ps3av_send_hdr send_hdr;
-        struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX];
-};
-
-/* audio: active/inactive */
-struct ps3av_pkt_audio_active {
-        struct ps3av_send_hdr send_hdr;
-        u32 audio_port;         /* in: audio active/inactive port */
-};
-
-/* audio: SPDIF user bit */
-struct ps3av_pkt_audio_spdif_bit {
-        u16 version;
-        u16 size;               /* size of command packet */
-        u32 cid;                /* command id */
-        u8 avport;              /* in: avport SPDIF only */
-        u8 reserved[3];
-        u32 audio_port;         /* in: SPDIF only */
-        u32 spdif_bit_data[12]; /* in: user bit data */
-};
-
-/* audio: audio control */
-struct ps3av_pkt_audio_ctrl {
-        u16 version;
-        u16 size;               /* size of command packet */
-        u32 cid;                /* command id */
-        u32 audio_ctrl_id;      /* in: control id */
-        u32 audio_ctrl_data[4]; /* in: control data */
-};
-
-/* avb:param */
-#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE        \
-        (PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \
-         PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \
-         PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \
-         PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param))
-
-struct ps3av_pkt_avb_param {
-        struct ps3av_send_hdr send_hdr;
-        u16 num_of_video_pkt;
-        u16 num_of_audio_pkt;
-        u16 num_of_av_video_pkt;
-        u16 num_of_av_audio_pkt;
-        /*
-         * The actual buffer layout depends on the fields above:
-         *
-         * struct ps3av_pkt_video_mode video[num_of_video_pkt];
-         * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt];
-         * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt];
-         * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt];
-         */
-        u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE];
-};
-
-
-/** command status **/
-#define PS3AV_STATUS_SUCCESS                    0x0000  /* success */
-#define PS3AV_STATUS_RECEIVE_VUART_ERROR        0x0001  /* receive vuart error */
-#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL    0x0002  /* syscon communication error */
-#define PS3AV_STATUS_INVALID_COMMAND            0x0003  /* obsolete invalid CID */
-#define PS3AV_STATUS_INVALID_PORT               0x0004  /* invalid port number */
-#define PS3AV_STATUS_INVALID_VID                0x0005  /* invalid video format */
-#define PS3AV_STATUS_INVALID_COLOR_SPACE        0x0006  /* invalid video colose space */
-#define PS3AV_STATUS_INVALID_FS                 0x0007  /* invalid audio sampling freq */
-#define PS3AV_STATUS_INVALID_AUDIO_CH           0x0008  /* invalid audio channel number */
-#define PS3AV_STATUS_UNSUPPORTED_VERSION        0x0009  /* version mismatch  */
-#define PS3AV_STATUS_INVALID_SAMPLE_SIZE        0x000a  /* invalid audio sample bit size */
-#define PS3AV_STATUS_FAILURE                    0x000b  /* other failures */
-#define PS3AV_STATUS_UNSUPPORTED_COMMAND        0x000c  /* unsupported cid */
-#define PS3AV_STATUS_BUFFER_OVERFLOW            0x000d  /* write buffer overflow */
-#define PS3AV_STATUS_INVALID_VIDEO_PARAM        0x000e  /* invalid video param */
-#define PS3AV_STATUS_NO_SEL                     0x000f  /* not exist selector */
-#define PS3AV_STATUS_INVALID_AV_PARAM           0x0010  /* invalid backend param */
-#define PS3AV_STATUS_INVALID_AUDIO_PARAM        0x0011  /* invalid audio param */
-#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE      0x0012  /* unsupported hdmi mode */
-#define PS3AV_STATUS_NO_SYNC_HEAD               0x0013  /* sync head failed */
-
-extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *);
-extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *);
-
-extern int ps3av_cmd_init(void);
-extern int ps3av_cmd_fin(void);
-extern int ps3av_cmd_av_video_mute(int, u32 *, u32);
-extern int ps3av_cmd_av_video_disable_sig(u32);
-extern int ps3av_cmd_av_tv_mute(u32, u32);
-extern int ps3av_cmd_enable_event(void);
-extern int ps3av_cmd_av_hdmi_mode(u8);
-extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32);
-extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32);
-extern int ps3av_cmd_video_format_black(u32, u32, u32);
-extern int ps3av_cmd_av_audio_mute(int, u32 *, u32);
-extern u32 ps3av_cmd_set_av_audio_param(void *, u32,
-                                        const struct ps3av_pkt_audio_mode *,
-                                        u32);
-extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32,
-                                     u32, u32, u32, u32);
-extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *);
-extern int ps3av_cmd_audio_mute(int, u32 *, u32);
-extern int ps3av_cmd_audio_active(int, u32);
-extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32);
-extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *);
-extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *,
-                                            u32);
-
-extern int ps3av_set_video_mode(u32);
-extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32);
-extern int ps3av_get_auto_mode(void);
-extern int ps3av_get_mode(void);
-extern int ps3av_video_mode2res(u32, u32 *, u32 *);
-extern int ps3av_video_mute(int);
-extern int ps3av_audio_mute(int);
-extern int ps3av_dev_open(void);
-extern int ps3av_dev_close(void);
-extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data),
-                                    void *flip_data);
-extern void ps3av_flip_ctl(int on);
-
-#endif  /* _ASM_POWERPC_PS3AV_H_ */
diff --git a/include/asm-powerpc/ps3fb.h b/include/asm-powerpc/ps3fb.h
deleted file mode 100644
index 3f121fe4010d..000000000000
--- a/include/asm-powerpc/ps3fb.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2006 Sony Computer Entertainment Inc.
- * Copyright 2006, 2007 Sony Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published
- * by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _ASM_POWERPC_PS3FB_H_
-#define _ASM_POWERPC_PS3FB_H_
-
-#include <linux/ioctl.h>
-
-/* ioctl */
-#define PS3FB_IOCTL_SETMODE       _IOW('r',  1, int) /* set video mode */
-#define PS3FB_IOCTL_GETMODE       _IOR('r',  2, int) /* get video mode */
-#define PS3FB_IOCTL_SCREENINFO    _IOR('r',  3, int) /* get screen info */
-#define PS3FB_IOCTL_ON            _IO('r', 4)        /* use IOCTL_FSEL */
-#define PS3FB_IOCTL_OFF           _IO('r', 5)        /* return to normal-flip */
-#define PS3FB_IOCTL_FSEL          _IOW('r', 6, int)  /* blit and flip request */
-
-#ifndef FBIO_WAITFORVSYNC
-#define FBIO_WAITFORVSYNC         _IOW('F', 0x20, __u32) /* wait for vsync */
-#endif
-
-struct ps3fb_ioctl_res {
-        __u32 xres; /* frame buffer x_size */
-        __u32 yres; /* frame buffer y_size */
-        __u32 xoff; /* margine x  */
-        __u32 yoff; /* margine y */
-        __u32 num_frames; /* num of frame buffers */
-};
-
-#endif /* _ASM_POWERPC_PS3FB_H_ */
diff --git a/include/asm-powerpc/ps3stor.h b/include/asm-powerpc/ps3stor.h
deleted file mode 100644
index 6fcaf714fa50..000000000000
--- a/include/asm-powerpc/ps3stor.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * PS3 Storage Devices
- *
- * Copyright (C) 2007 Sony Computer Entertainment Inc.
- * Copyright 2007 Sony Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published
- * by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _ASM_POWERPC_PS3STOR_H_
-#define _ASM_POWERPC_PS3STOR_H_
-
-#include <linux/interrupt.h>
-
-#include <asm/ps3.h>
-
-
-struct ps3_storage_region {
-        unsigned int id;
-        u64 start;
-        u64 size;
-};
-
-struct ps3_storage_device {
-        struct ps3_system_bus_device sbd;
-
-        struct ps3_dma_region dma_region;
-        unsigned int irq;
-        u64 blk_size;
-
-        u64 tag;
-        u64 lv1_status;
-        struct completion done;
-
-        unsigned long bounce_size;
-        void *bounce_buf;
-        u64 bounce_lpar;
-        dma_addr_t bounce_dma;
-
-        unsigned int num_regions;
-        unsigned long accessible_regions;
-        unsigned int region_idx;                /* first accessible region */
-        struct ps3_storage_region regions[0];   /* Must be last */
-};
-
-static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev)
-{
-        return container_of(dev, struct ps3_storage_device, sbd.core);
-}
-
-extern int ps3stor_setup(struct ps3_storage_device *dev,
-                         irq_handler_t handler);
-extern void ps3stor_teardown(struct ps3_storage_device *dev);
-extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar,
-                                      u64 start_sector, u64 sectors,
-                                      int write);
-extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd,
-                                u64 arg1, u64 arg2, u64 arg3, u64 arg4);
-
-#endif /* _ASM_POWERPC_PS3STOR_H_ */
diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h
deleted file mode 100644
index 734e0754fb9b..000000000000
--- a/include/asm-powerpc/ptrace.h
+++ /dev/null
@@ -1,293 +0,0 @@
-#ifndef _ASM_POWERPC_PTRACE_H
-#define _ASM_POWERPC_PTRACE_H
-
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- *
- * this should only contain volatile regs
- * since we can keep non-volatile in the thread_struct
- * should set this up when only volatiles are saved
- * by intr code.
- *
- * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
- * that the overall structure is a multiple of 16 bytes in length.
- *
- * Note that the offsets of the fields in this struct correspond with
- * the PT_* values below.  This simplifies arch/powerpc/kernel/ptrace.c.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs {
-        unsigned long gpr[32];
-        unsigned long nip;
-        unsigned long msr;
-        unsigned long orig_gpr3;        /* Used for restarting system calls */
-        unsigned long ctr;
-        unsigned long link;
-        unsigned long xer;
-        unsigned long ccr;
-#ifdef __powerpc64__
-        unsigned long softe;            /* Soft enabled/disabled */
-#else
-        unsigned long mq;               /* 601 only (not used at present) */
-                                        /* Used on APUS to hold IPL value. */
-#endif
-        unsigned long trap;             /* Reason for being here */
-        /* N.B. for critical exceptions on 4xx, the dar and dsisr
-           fields are overloaded to hold srr0 and srr1. */
-        unsigned long dar;              /* Fault registers */
-        unsigned long dsisr;            /* on 4xx/Book-E used for ESR */
-        unsigned long result;           /* Result of a system call */
-};
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#ifdef __powerpc64__
-
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
-#define STACK_FRAME_OVERHEAD    112     /* size of minimum stack frame */
-#define STACK_FRAME_LR_SAVE     2       /* Location of LR in stack frame */
-#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265)
-#define STACK_INT_FRAME_SIZE    (sizeof(struct pt_regs) + \
-                                        STACK_FRAME_OVERHEAD + 288)
-#define STACK_FRAME_MARKER      12
-
-/* Size of dummy stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE      128
-#define __SIGNAL_FRAMESIZE32    64
-
-#else /* __powerpc64__ */
-
-#define STACK_FRAME_OVERHEAD    16      /* size of minimum stack frame */
-#define STACK_FRAME_LR_SAVE     1       /* Location of LR in stack frame */
-#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773)
-#define STACK_INT_FRAME_SIZE    (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
-#define STACK_FRAME_MARKER      2
-
-/* Size of stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE      64
-
-#endif /* __powerpc64__ */
-
-#ifndef __ASSEMBLY__
-
-#define instruction_pointer(regs) ((regs)->nip)
-#define user_stack_pointer(regs) ((regs)->gpr[1])
-#define regs_return_value(regs) ((regs)->gpr[3])
-
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
-#ifdef __powerpc64__
-#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
-#else
-#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
-#endif
-
-#define force_successful_syscall_return()   \
-        do { \
-                set_thread_flag(TIF_NOERROR); \
-        } while(0)
-
-struct task_struct;
-extern unsigned long ptrace_get_reg(struct task_struct *task, int regno);
-extern int ptrace_put_reg(struct task_struct *task, int regno,
-                          unsigned long data);
-
-/*
- * We use the least-significant bit of the trap field to indicate
- * whether we have saved the full set of registers, or only a
- * partial set.  A 1 there means the partial set.
- * On 4xx we use the next bit to indicate whether the exception
- * is a critical exception (1 means it is).
- */
-#define FULL_REGS(regs)         (((regs)->trap & 1) == 0)
-#ifndef __powerpc64__
-#define IS_CRITICAL_EXC(regs)   (((regs)->trap & 2) != 0)
-#define IS_MCHECK_EXC(regs)     (((regs)->trap & 4) != 0)
-#define IS_DEBUG_EXC(regs)      (((regs)->trap & 8) != 0)
-#endif /* ! __powerpc64__ */
-#define TRAP(regs)              ((regs)->trap & ~0xF)
-#ifdef __powerpc64__
-#define CHECK_FULL_REGS(regs)   BUG_ON(regs->trap & 1)
-#else
-#define CHECK_FULL_REGS(regs)                                                 \
-do {                                                                          \
-        if ((regs)->trap & 1)                                                 \
-                printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
-} while (0)
-#endif /* __powerpc64__ */
-
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
-#define arch_has_single_step()  (1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-/*
- * Offsets used by 'ptrace' system call interface.
- * These can't be changed without breaking binary compatibility
- * with MkLinux, etc.
- */
-#define PT_R0   0
-#define PT_R1   1
-#define PT_R2   2
-#define PT_R3   3
-#define PT_R4   4
-#define PT_R5   5
-#define PT_R6   6
-#define PT_R7   7
-#define PT_R8   8
-#define PT_R9   9
-#define PT_R10  10
-#define PT_R11  11
-#define PT_R12  12
-#define PT_R13  13
-#define PT_R14  14
-#define PT_R15  15
-#define PT_R16  16
-#define PT_R17  17
-#define PT_R18  18
-#define PT_R19  19
-#define PT_R20  20
-#define PT_R21  21
-#define PT_R22  22
-#define PT_R23  23
-#define PT_R24  24
-#define PT_R25  25
-#define PT_R26  26
-#define PT_R27  27
-#define PT_R28  28
-#define PT_R29  29
-#define PT_R30  30
-#define PT_R31  31
-
-#define PT_NIP  32
-#define PT_MSR  33
-#define PT_ORIG_R3 34
-#define PT_CTR  35
-#define PT_LNK  36
-#define PT_XER  37
-#define PT_CCR  38
-#ifndef __powerpc64__
-#define PT_MQ   39
-#else
-#define PT_SOFTE 39
-#endif
-#define PT_TRAP 40
-#define PT_DAR  41
-#define PT_DSISR 42
-#define PT_RESULT 43
-#define PT_REGS_COUNT 44
-
-#define PT_FPR0 48      /* each FP reg occupies 2 slots in this space */
-
-#ifndef __powerpc64__
-
-#define PT_FPR31 (PT_FPR0 + 2*31)
-#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
-
-#else /* __powerpc64__ */
-
-#define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */
-
-#ifdef __KERNEL__
-#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */
-#endif
-
-#define PT_VR0 82       /* each Vector reg occupies 2 slots in 64-bit */
-#define PT_VSCR (PT_VR0 + 32*2 + 1)
-#define PT_VRSAVE (PT_VR0 + 33*2)
-
-#ifdef __KERNEL__
-#define PT_VR0_32 164   /* each Vector reg occupies 4 slots in 32-bit */
-#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
-#define PT_VRSAVE_32 (PT_VR0 + 33*4)
-#endif
-
-/*
- * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
- */
-#define PT_VSR0 150     /* each VSR reg occupies 2 slots in 64-bit */
-#define PT_VSR31 (PT_VSR0 + 2*31)
-#ifdef __KERNEL__
-#define PT_VSR0_32 300  /* each VSR reg occupies 4 slots in 32-bit */
-#endif
-#endif /* __powerpc64__ */
-
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
- * The transfer totals 34 quadword.  Quadwords 0-31 contain the
- * corresponding vector registers.  Quadword 32 contains the vscr as the
- * last word (offset 12) within that quadword.  Quadword 33 contains the
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface.  This allows signal handling and ptrace to use the same
- * structures.  This also simplifies the implementation of a bi-arch
- * (combined (32- and 64-bit) gdb.
- */
-#define PTRACE_GETVRREGS        18
-#define PTRACE_SETVRREGS        19
-
-/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
- * spefscr, in one go */
-#define PTRACE_GETEVRREGS       20
-#define PTRACE_SETEVRREGS       21
-
-/* Get the first 32 128bit VSX registers */
-#define PTRACE_GETVSRREGS       27
-#define PTRACE_SETVSRREGS       28
-
-/*
- * Get or set a debug register. The first 16 are DABR registers and the
- * second 16 are IABR registers.
- */
-#define PTRACE_GET_DEBUGREG     25
-#define PTRACE_SET_DEBUGREG     26
-
-/* (new) PTRACE requests using the same numbers as x86 and the same
- * argument ordering. Additionally, they support more registers too
- */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_GETREGS64          22
-#define PTRACE_SETREGS64          23
-
-/* (old) PTRACE requests with inverted arguments */
-#define PPC_PTRACE_GETREGS      0x99    /* Get GPRs 0 - 31 */
-#define PPC_PTRACE_SETREGS      0x98    /* Set GPRs 0 - 31 */
-#define PPC_PTRACE_GETFPREGS    0x97    /* Get FPRs 0 - 31 */
-#define PPC_PTRACE_SETFPREGS    0x96    /* Set FPRs 0 - 31 */
-
-/* Calls to trace a 64bit program from a 32bit program */
-#define PPC_PTRACE_PEEKTEXT_3264 0x95
-#define PPC_PTRACE_PEEKDATA_3264 0x94
-#define PPC_PTRACE_POKETEXT_3264 0x93
-#define PPC_PTRACE_POKEDATA_3264 0x92
-#define PPC_PTRACE_PEEKUSR_3264  0x91
-#define PPC_PTRACE_POKEUSR_3264  0x90
-
-#endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
deleted file mode 100644
index edee15d269ea..000000000000
--- a/include/asm-powerpc/qe.h
+++ /dev/null
@@ -1,642 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors:     Shlomi Gridish <gridish@freescale.com>
- *              Li Yang <leoli@freescale.com>
- *
- * Description:
- * QUICC Engine (QE) external definitions and structure.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_H
-#define _ASM_POWERPC_QE_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <asm/cpm.h>
-#include <asm/immap_qe.h>
-
-#define QE_NUM_OF_SNUM  28
-#define QE_NUM_OF_BRGS  16
-#define QE_NUM_OF_PORTS 1024
-
-/* Memory partitions
-*/
-#define MEM_PART_SYSTEM         0
-#define MEM_PART_SECONDARY      1
-#define MEM_PART_MURAM          2
-
-/* Clocks and BRGs */
-enum qe_clock {
-        QE_CLK_NONE = 0,
-        QE_BRG1,                /* Baud Rate Generator 1 */
-        QE_BRG2,                /* Baud Rate Generator 2 */
-        QE_BRG3,                /* Baud Rate Generator 3 */
-        QE_BRG4,                /* Baud Rate Generator 4 */
-        QE_BRG5,                /* Baud Rate Generator 5 */
-        QE_BRG6,                /* Baud Rate Generator 6 */
-        QE_BRG7,                /* Baud Rate Generator 7 */
-        QE_BRG8,                /* Baud Rate Generator 8 */
-        QE_BRG9,                /* Baud Rate Generator 9 */
-        QE_BRG10,               /* Baud Rate Generator 10 */
-        QE_BRG11,               /* Baud Rate Generator 11 */
-        QE_BRG12,               /* Baud Rate Generator 12 */
-        QE_BRG13,               /* Baud Rate Generator 13 */
-        QE_BRG14,               /* Baud Rate Generator 14 */
-        QE_BRG15,               /* Baud Rate Generator 15 */
-        QE_BRG16,               /* Baud Rate Generator 16 */
-        QE_CLK1,                /* Clock 1 */
-        QE_CLK2,                /* Clock 2 */
-        QE_CLK3,                /* Clock 3 */
-        QE_CLK4,                /* Clock 4 */
-        QE_CLK5,                /* Clock 5 */
-        QE_CLK6,                /* Clock 6 */
-        QE_CLK7,                /* Clock 7 */
-        QE_CLK8,                /* Clock 8 */
-        QE_CLK9,                /* Clock 9 */
-        QE_CLK10,               /* Clock 10 */
-        QE_CLK11,               /* Clock 11 */
-        QE_CLK12,               /* Clock 12 */
-        QE_CLK13,               /* Clock 13 */
-        QE_CLK14,               /* Clock 14 */
-        QE_CLK15,               /* Clock 15 */
-        QE_CLK16,               /* Clock 16 */
-        QE_CLK17,               /* Clock 17 */
-        QE_CLK18,               /* Clock 18 */
-        QE_CLK19,               /* Clock 19 */
-        QE_CLK20,               /* Clock 20 */
-        QE_CLK21,               /* Clock 21 */
-        QE_CLK22,               /* Clock 22 */
-        QE_CLK23,               /* Clock 23 */
-        QE_CLK24,               /* Clock 24 */
-        QE_CLK_DUMMY
-};
-
-static inline bool qe_clock_is_brg(enum qe_clock clk)
-{
-        return clk >= QE_BRG1 && clk <= QE_BRG16;
-}
-
-extern spinlock_t cmxgcr_lock;
-
-/* Export QE common operations */
-extern void __init qe_reset(void);
-
-/* QE PIO */
-#define QE_PIO_PINS 32
-
-struct qe_pio_regs {
-        __be32  cpodr;          /* Open drain register */
-        __be32  cpdata;         /* Data register */
-        __be32  cpdir1;         /* Direction register */
-        __be32  cpdir2;         /* Direction register */
-        __be32  cppar1;         /* Pin assignment register */
-        __be32  cppar2;         /* Pin assignment register */
-#ifdef CONFIG_PPC_85xx
-        u8      pad[8];
-#endif
-};
-
-extern int par_io_init(struct device_node *np);
-extern int par_io_of_config(struct device_node *np);
-#define QE_PIO_DIR_IN   2
-#define QE_PIO_DIR_OUT  1
-extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
-                                int dir, int open_drain, int assignment,
-                                int has_irq);
-extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-                             int assignment, int has_irq);
-extern int par_io_data_set(u8 port, u8 pin, u8 val);
-
-/* QE internal API */
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-enum qe_clock qe_clock_source(const char *source);
-unsigned int qe_get_brg_clk(void);
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
-int qe_get_snum(void);
-void qe_put_snum(u8 snum);
-/* we actually use cpm_muram implementation, define this for convenience */
-#define qe_muram_init cpm_muram_init
-#define qe_muram_alloc cpm_muram_alloc
-#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
-#define qe_muram_free cpm_muram_free
-#define qe_muram_addr cpm_muram_addr
-#define qe_muram_offset cpm_muram_offset
-
-/* Structure that defines QE firmware binary files.
- *
- * See Documentation/powerpc/qe-firmware.txt for a description of these
- * fields.
- */
-struct qe_firmware {
-        struct qe_header {
-                __be32 length;  /* Length of the entire structure, in bytes */
-                u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
-                u8 version;     /* Version of this layout. First ver is '1' */
-        } header;
-        u8 id[62];      /* Null-terminated identifier string */
-        u8 split;       /* 0 = shared I-RAM, 1 = split I-RAM */
-        u8 count;       /* Number of microcode[] structures */
-        struct {
-                __be16 model;           /* The SOC model  */
-                u8 major;               /* The SOC revision major */
-                u8 minor;               /* The SOC revision minor */
-        } __attribute__ ((packed)) soc;
-        u8 padding[4];                  /* Reserved, for alignment */
-        __be64 extended_modes;          /* Extended modes */
-        __be32 vtraps[8];               /* Virtual trap addresses */
-        u8 reserved[4];                 /* Reserved, for future expansion */
-        struct qe_microcode {
-                u8 id[32];              /* Null-terminated identifier */
-                __be32 traps[16];       /* Trap addresses, 0 == ignore */
-                __be32 eccr;            /* The value for the ECCR register */
-                __be32 iram_offset;     /* Offset into I-RAM for the code */
-                __be32 count;           /* Number of 32-bit words of the code */
-                __be32 code_offset;     /* Offset of the actual microcode */
-                u8 major;               /* The microcode version major */
-                u8 minor;               /* The microcode version minor */
-                u8 revision;            /* The microcode version revision */
-                u8 padding;             /* Reserved, for alignment */
-                u8 reserved[4];         /* Reserved, for future expansion */
-        } __attribute__ ((packed)) microcode[1];
-        /* All microcode binaries should be located here */
-        /* CRC32 should be located here, after the microcode binaries */
-} __attribute__ ((packed));
-
-struct qe_firmware_info {
-        char id[64];            /* Firmware name */
-        u32 vtraps[8];          /* Virtual trap addresses */
-        u64 extended_modes;     /* Extended modes */
-};
-
-/* Upload a firmware to the QE */
-int qe_upload_firmware(const struct qe_firmware *firmware);
-
-/* Obtain information on the uploaded firmware */
-struct qe_firmware_info *qe_get_firmware_info(void);
-
-/* QE USB */
-int qe_usb_clock_set(enum qe_clock clk, int rate);
-
-/* Buffer descriptors */
-struct qe_bd {
-        __be16 status;
-        __be16 length;
-        __be32 buf;
-} __attribute__ ((packed));
-
-#define BD_STATUS_MASK  0xffff0000
-#define BD_LENGTH_MASK  0x0000ffff
-
-/* Alignment */
-#define QE_INTR_TABLE_ALIGN     16      /* ??? */
-#define QE_ALIGNMENT_OF_BD      8
-#define QE_ALIGNMENT_OF_PRAM    64
-
-/* RISC allocation */
-enum qe_risc_allocation {
-        QE_RISC_ALLOCATION_RISC1 = 1,   /* RISC 1 */
-        QE_RISC_ALLOCATION_RISC2 = 2,   /* RISC 2 */
-        QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3  /* Dynamically choose
-                                                   RISC 1 or RISC 2 */
-};
-
-/* QE extended filtering Table Lookup Key Size */
-enum qe_fltr_tbl_lookup_key_size {
-        QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
-                = 0x3f,         /* LookupKey parsed by the Generate LookupKey
-                                   CMD is truncated to 8 bytes */
-        QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
-                = 0x5f,         /* LookupKey parsed by the Generate LookupKey
-                                   CMD is truncated to 16 bytes */
-};
-
-/* QE FLTR extended filtering Largest External Table Lookup Key Size */
-enum qe_fltr_largest_external_tbl_lookup_key_size {
-        QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
-                = 0x0,/* not used */
-        QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
-                = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,        /* 8 bytes */
-        QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
-                = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,       /* 16 bytes */
-};
-
-/* structure representing QE parameter RAM */
-struct qe_timer_tables {
-        u16 tm_base;            /* QE timer table base adr */
-        u16 tm_ptr;             /* QE timer table pointer */
-        u16 r_tmr;              /* QE timer mode register */
-        u16 r_tmv;              /* QE timer valid register */
-        u32 tm_cmd;             /* QE timer cmd register */
-        u32 tm_cnt;             /* QE timer internal cnt */
-} __attribute__ ((packed));
-
-#define QE_FLTR_TAD_SIZE        8
-
-/* QE extended filtering Termination Action Descriptor (TAD) */
-struct qe_fltr_tad {
-        u8 serialized[QE_FLTR_TAD_SIZE];
-} __attribute__ ((packed));
-
-/* Communication Direction */
-enum comm_dir {
-        COMM_DIR_NONE = 0,
-        COMM_DIR_RX = 1,
-        COMM_DIR_TX = 2,
-        COMM_DIR_RX_AND_TX = 3
-};
-
-/* QE CMXUCR Registers.
- * There are two UCCs represented in each of the four CMXUCR registers.
- * These values are for the UCC in the LSBs
- */
-#define QE_CMXUCR_MII_ENET_MNG          0x00007000
-#define QE_CMXUCR_MII_ENET_MNG_SHIFT    12
-#define QE_CMXUCR_GRANT                 0x00008000
-#define QE_CMXUCR_TSA                   0x00004000
-#define QE_CMXUCR_BKPT                  0x00000100
-#define QE_CMXUCR_TX_CLK_SRC_MASK       0x0000000F
-
-/* QE CMXGCR Registers.
-*/
-#define QE_CMXGCR_MII_ENET_MNG          0x00007000
-#define QE_CMXGCR_MII_ENET_MNG_SHIFT    12
-#define QE_CMXGCR_USBCS                 0x0000000f
-#define QE_CMXGCR_USBCS_CLK3            0x1
-#define QE_CMXGCR_USBCS_CLK5            0x2
-#define QE_CMXGCR_USBCS_CLK7            0x3
-#define QE_CMXGCR_USBCS_CLK9            0x4
-#define QE_CMXGCR_USBCS_CLK13           0x5
-#define QE_CMXGCR_USBCS_CLK17           0x6
-#define QE_CMXGCR_USBCS_CLK19           0x7
-#define QE_CMXGCR_USBCS_CLK21           0x8
-#define QE_CMXGCR_USBCS_BRG9            0x9
-#define QE_CMXGCR_USBCS_BRG10           0xa
-
-/* QE CECR Commands.
-*/
-#define QE_CR_FLG                       0x00010000
-#define QE_RESET                        0x80000000
-#define QE_INIT_TX_RX                   0x00000000
-#define QE_INIT_RX                      0x00000001
-#define QE_INIT_TX                      0x00000002
-#define QE_ENTER_HUNT_MODE              0x00000003
-#define QE_STOP_TX                      0x00000004
-#define QE_GRACEFUL_STOP_TX             0x00000005
-#define QE_RESTART_TX                   0x00000006
-#define QE_CLOSE_RX_BD                  0x00000007
-#define QE_SWITCH_COMMAND               0x00000007
-#define QE_SET_GROUP_ADDRESS            0x00000008
-#define QE_START_IDMA                   0x00000009
-#define QE_MCC_STOP_RX                  0x00000009
-#define QE_ATM_TRANSMIT                 0x0000000a
-#define QE_HPAC_CLEAR_ALL               0x0000000b
-#define QE_GRACEFUL_STOP_RX             0x0000001a
-#define QE_RESTART_RX                   0x0000001b
-#define QE_HPAC_SET_PRIORITY            0x0000010b
-#define QE_HPAC_STOP_TX                 0x0000020b
-#define QE_HPAC_STOP_RX                 0x0000030b
-#define QE_HPAC_GRACEFUL_STOP_TX        0x0000040b
-#define QE_HPAC_GRACEFUL_STOP_RX        0x0000050b
-#define QE_HPAC_START_TX                0x0000060b
-#define QE_HPAC_START_RX                0x0000070b
-#define QE_USB_STOP_TX                  0x0000000a
-#define QE_USB_RESTART_TX               0x0000000c
-#define QE_QMC_STOP_TX                  0x0000000c
-#define QE_QMC_STOP_RX                  0x0000000d
-#define QE_SS7_SU_FIL_RESET             0x0000000e
-/* jonathbr added from here down for 83xx */
-#define QE_RESET_BCS                    0x0000000a
-#define QE_MCC_INIT_TX_RX_16            0x00000003
-#define QE_MCC_STOP_TX                  0x00000004
-#define QE_MCC_INIT_TX_1                0x00000005
-#define QE_MCC_INIT_RX_1                0x00000006
-#define QE_MCC_RESET                    0x00000007
-#define QE_SET_TIMER                    0x00000008
-#define QE_RANDOM_NUMBER                0x0000000c
-#define QE_ATM_MULTI_THREAD_INIT        0x00000011
-#define QE_ASSIGN_PAGE                  0x00000012
-#define QE_ADD_REMOVE_HASH_ENTRY        0x00000013
-#define QE_START_FLOW_CONTROL           0x00000014
-#define QE_STOP_FLOW_CONTROL            0x00000015
-#define QE_ASSIGN_PAGE_TO_DEVICE        0x00000016
-
-#define QE_ASSIGN_RISC                  0x00000010
-#define QE_CR_MCN_NORMAL_SHIFT          6
-#define QE_CR_MCN_USB_SHIFT             4
-#define QE_CR_MCN_RISC_ASSIGN_SHIFT     8
-#define QE_CR_SNUM_SHIFT                17
-
-/* QE CECR Sub Block - sub block of QE command.
-*/
-#define QE_CR_SUBBLOCK_INVALID          0x00000000
-#define QE_CR_SUBBLOCK_USB              0x03200000
-#define QE_CR_SUBBLOCK_UCCFAST1         0x02000000
-#define QE_CR_SUBBLOCK_UCCFAST2         0x02200000
-#define QE_CR_SUBBLOCK_UCCFAST3         0x02400000
-#define QE_CR_SUBBLOCK_UCCFAST4         0x02600000
-#define QE_CR_SUBBLOCK_UCCFAST5         0x02800000
-#define QE_CR_SUBBLOCK_UCCFAST6         0x02a00000
-#define QE_CR_SUBBLOCK_UCCFAST7         0x02c00000
-#define QE_CR_SUBBLOCK_UCCFAST8         0x02e00000
-#define QE_CR_SUBBLOCK_UCCSLOW1         0x00000000
-#define QE_CR_SUBBLOCK_UCCSLOW2         0x00200000
-#define QE_CR_SUBBLOCK_UCCSLOW3         0x00400000
-#define QE_CR_SUBBLOCK_UCCSLOW4         0x00600000
-#define QE_CR_SUBBLOCK_UCCSLOW5         0x00800000
-#define QE_CR_SUBBLOCK_UCCSLOW6         0x00a00000
-#define QE_CR_SUBBLOCK_UCCSLOW7         0x00c00000
-#define QE_CR_SUBBLOCK_UCCSLOW8         0x00e00000
-#define QE_CR_SUBBLOCK_MCC1             0x03800000
-#define QE_CR_SUBBLOCK_MCC2             0x03a00000
-#define QE_CR_SUBBLOCK_MCC3             0x03000000
-#define QE_CR_SUBBLOCK_IDMA1            0x02800000
-#define QE_CR_SUBBLOCK_IDMA2            0x02a00000
-#define QE_CR_SUBBLOCK_IDMA3            0x02c00000
-#define QE_CR_SUBBLOCK_IDMA4            0x02e00000
-#define QE_CR_SUBBLOCK_HPAC             0x01e00000
-#define QE_CR_SUBBLOCK_SPI1             0x01400000
-#define QE_CR_SUBBLOCK_SPI2             0x01600000
-#define QE_CR_SUBBLOCK_RAND             0x01c00000
-#define QE_CR_SUBBLOCK_TIMER            0x01e00000
-#define QE_CR_SUBBLOCK_GENERAL          0x03c00000
-
-/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
-#define QE_CR_PROTOCOL_UNSPECIFIED      0x00    /* For all other protocols */
-#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
-#define QE_CR_PROTOCOL_QMC              0x02
-#define QE_CR_PROTOCOL_UART             0x04
-#define QE_CR_PROTOCOL_ATM_POS          0x0A
-#define QE_CR_PROTOCOL_ETHERNET         0x0C
-#define QE_CR_PROTOCOL_L2_SWITCH        0x0D
-
-/* BRG configuration register */
-#define QE_BRGC_ENABLE          0x00010000
-#define QE_BRGC_DIVISOR_SHIFT   1
-#define QE_BRGC_DIVISOR_MAX     0xFFF
-#define QE_BRGC_DIV16           1
-
-/* QE Timers registers */
-#define QE_GTCFR1_PCAS  0x80
-#define QE_GTCFR1_STP2  0x20
-#define QE_GTCFR1_RST2  0x10
-#define QE_GTCFR1_GM2   0x08
-#define QE_GTCFR1_GM1   0x04
-#define QE_GTCFR1_STP1  0x02
-#define QE_GTCFR1_RST1  0x01
-
-/* SDMA registers */
-#define QE_SDSR_BER1    0x02000000
-#define QE_SDSR_BER2    0x01000000
-
-#define QE_SDMR_GLB_1_MSK       0x80000000
-#define QE_SDMR_ADR_SEL         0x20000000
-#define QE_SDMR_BER1_MSK        0x02000000
-#define QE_SDMR_BER2_MSK        0x01000000
-#define QE_SDMR_EB1_MSK         0x00800000
-#define QE_SDMR_ER1_MSK         0x00080000
-#define QE_SDMR_ER2_MSK         0x00040000
-#define QE_SDMR_CEN_MASK        0x0000E000
-#define QE_SDMR_SBER_1          0x00000200
-#define QE_SDMR_SBER_2          0x00000200
-#define QE_SDMR_EB1_PR_MASK     0x000000C0
-#define QE_SDMR_ER1_PR          0x00000008
-
-#define QE_SDMR_CEN_SHIFT       13
-#define QE_SDMR_EB1_PR_SHIFT    6
-
-#define QE_SDTM_MSNUM_SHIFT     24
-
-#define QE_SDEBCR_BA_MASK       0x01FFFFFF
-
-/* Communication Processor */
-#define QE_CP_CERCR_MEE         0x8000  /* Multi-user RAM ECC enable */
-#define QE_CP_CERCR_IEE         0x4000  /* Instruction RAM ECC enable */
-#define QE_CP_CERCR_CIR         0x0800  /* Common instruction RAM */
-
-/* I-RAM */
-#define QE_IRAM_IADD_AIE        0x80000000      /* Auto Increment Enable */
-#define QE_IRAM_IADD_BADDR      0x00080000      /* Base Address */
-
-/* UPC */
-#define UPGCR_PROTOCOL  0x80000000      /* protocol ul2 or pl2 */
-#define UPGCR_TMS       0x40000000      /* Transmit master/slave mode */
-#define UPGCR_RMS       0x20000000      /* Receive master/slave mode */
-#define UPGCR_ADDR      0x10000000      /* Master MPHY Addr multiplexing */
-#define UPGCR_DIAG      0x01000000      /* Diagnostic mode */
-
-/* UCC GUEMR register */
-#define UCC_GUEMR_MODE_MASK_RX  0x02
-#define UCC_GUEMR_MODE_FAST_RX  0x02
-#define UCC_GUEMR_MODE_SLOW_RX  0x00
-#define UCC_GUEMR_MODE_MASK_TX  0x01
-#define UCC_GUEMR_MODE_FAST_TX  0x01
-#define UCC_GUEMR_MODE_SLOW_TX  0x00
-#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
-#define UCC_GUEMR_SET_RESERVED3 0x10    /* Bit 3 in the guemr is reserved but
-                                           must be set 1 */
-
-/* structure representing UCC SLOW parameter RAM */
-struct ucc_slow_pram {
-        __be16 rbase;           /* RX BD base address */
-        __be16 tbase;           /* TX BD base address */
-        u8 rbmr;                /* RX bus mode register (same as CPM's RFCR) */
-        u8 tbmr;                /* TX bus mode register (same as CPM's TFCR) */
-        __be16 mrblr;           /* Rx buffer length */
-        __be32 rstate;          /* Rx internal state */
-        __be32 rptr;            /* Rx internal data pointer */
-        __be16 rbptr;           /* rb BD Pointer */
-        __be16 rcount;          /* Rx internal byte count */
-        __be32 rtemp;           /* Rx temp */
-        __be32 tstate;          /* Tx internal state */
-        __be32 tptr;            /* Tx internal data pointer */
-        __be16 tbptr;           /* Tx BD pointer */
-        __be16 tcount;          /* Tx byte count */
-        __be32 ttemp;           /* Tx temp */
-        __be32 rcrc;            /* temp receive CRC */
-        __be32 tcrc;            /* temp transmit CRC */
-} __attribute__ ((packed));
-
-/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_SAM_QMC         0x00000000
-#define UCC_SLOW_GUMR_H_SAM_SATM        0x00008000
-#define UCC_SLOW_GUMR_H_REVD            0x00002000
-#define UCC_SLOW_GUMR_H_TRX             0x00001000
-#define UCC_SLOW_GUMR_H_TTX             0x00000800
-#define UCC_SLOW_GUMR_H_CDP             0x00000400
-#define UCC_SLOW_GUMR_H_CTSP            0x00000200
-#define UCC_SLOW_GUMR_H_CDS             0x00000100
-#define UCC_SLOW_GUMR_H_CTSS            0x00000080
-#define UCC_SLOW_GUMR_H_TFL             0x00000040
-#define UCC_SLOW_GUMR_H_RFW             0x00000020
-#define UCC_SLOW_GUMR_H_TXSY            0x00000010
-#define UCC_SLOW_GUMR_H_4SYNC           0x00000004
-#define UCC_SLOW_GUMR_H_8SYNC           0x00000008
-#define UCC_SLOW_GUMR_H_16SYNC          0x0000000c
-#define UCC_SLOW_GUMR_H_RTSM            0x00000002
-#define UCC_SLOW_GUMR_H_RSYN            0x00000001
-
-#define UCC_SLOW_GUMR_L_TCI             0x10000000
-#define UCC_SLOW_GUMR_L_RINV            0x02000000
-#define UCC_SLOW_GUMR_L_TINV            0x01000000
-#define UCC_SLOW_GUMR_L_TEND            0x00040000
-#define UCC_SLOW_GUMR_L_TDCR_MASK       0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_32         0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_16         0x00020000
-#define UCC_SLOW_GUMR_L_TDCR_8          0x00010000
-#define UCC_SLOW_GUMR_L_TDCR_1          0x00000000
-#define UCC_SLOW_GUMR_L_RDCR_MASK       0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_32         0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_16         0x00008000
-#define UCC_SLOW_GUMR_L_RDCR_8          0x00004000
-#define UCC_SLOW_GUMR_L_RDCR_1          0x00000000
-#define UCC_SLOW_GUMR_L_RENC_NRZI       0x00000800
-#define UCC_SLOW_GUMR_L_RENC_NRZ        0x00000000
-#define UCC_SLOW_GUMR_L_TENC_NRZI       0x00000100
-#define UCC_SLOW_GUMR_L_TENC_NRZ        0x00000000
-#define UCC_SLOW_GUMR_L_DIAG_MASK       0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_LE         0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_ECHO       0x00000080
-#define UCC_SLOW_GUMR_L_DIAG_LOOP       0x00000040
-#define UCC_SLOW_GUMR_L_DIAG_NORM       0x00000000
-#define UCC_SLOW_GUMR_L_ENR             0x00000020
-#define UCC_SLOW_GUMR_L_ENT             0x00000010
-#define UCC_SLOW_GUMR_L_MODE_MASK       0x0000000F
-#define UCC_SLOW_GUMR_L_MODE_BISYNC     0x00000008
-#define UCC_SLOW_GUMR_L_MODE_AHDLC      0x00000006
-#define UCC_SLOW_GUMR_L_MODE_UART       0x00000004
-#define UCC_SLOW_GUMR_L_MODE_QMC        0x00000002
-
-/* General UCC FAST Mode Register */
-#define UCC_FAST_GUMR_TCI       0x20000000
-#define UCC_FAST_GUMR_TRX       0x10000000
-#define UCC_FAST_GUMR_TTX       0x08000000
-#define UCC_FAST_GUMR_CDP       0x04000000
-#define UCC_FAST_GUMR_CTSP      0x02000000
-#define UCC_FAST_GUMR_CDS       0x01000000
-#define UCC_FAST_GUMR_CTSS      0x00800000
-#define UCC_FAST_GUMR_TXSY      0x00020000
-#define UCC_FAST_GUMR_RSYN      0x00010000
-#define UCC_FAST_GUMR_RTSM      0x00002000
-#define UCC_FAST_GUMR_REVD      0x00000400
-#define UCC_FAST_GUMR_ENR       0x00000020
-#define UCC_FAST_GUMR_ENT       0x00000010
-
-/* UART Slow UCC Event Register (UCCE) */
-#define UCC_UART_UCCE_AB        0x0200
-#define UCC_UART_UCCE_IDLE      0x0100
-#define UCC_UART_UCCE_GRA       0x0080
-#define UCC_UART_UCCE_BRKE      0x0040
-#define UCC_UART_UCCE_BRKS      0x0020
-#define UCC_UART_UCCE_CCR       0x0008
-#define UCC_UART_UCCE_BSY       0x0004
-#define UCC_UART_UCCE_TX        0x0002
-#define UCC_UART_UCCE_RX        0x0001
-
-/* HDLC Slow UCC Event Register (UCCE) */
-#define UCC_HDLC_UCCE_GLR       0x1000
-#define UCC_HDLC_UCCE_GLT       0x0800
-#define UCC_HDLC_UCCE_IDLE      0x0100
-#define UCC_HDLC_UCCE_BRKE      0x0040
-#define UCC_HDLC_UCCE_BRKS      0x0020
-#define UCC_HDLC_UCCE_TXE       0x0010
-#define UCC_HDLC_UCCE_RXF       0x0008
-#define UCC_HDLC_UCCE_BSY       0x0004
-#define UCC_HDLC_UCCE_TXB       0x0002
-#define UCC_HDLC_UCCE_RXB       0x0001
-
-/* BISYNC Slow UCC Event Register (UCCE) */
-#define UCC_BISYNC_UCCE_GRA     0x0080
-#define UCC_BISYNC_UCCE_TXE     0x0010
-#define UCC_BISYNC_UCCE_RCH     0x0008
-#define UCC_BISYNC_UCCE_BSY     0x0004
-#define UCC_BISYNC_UCCE_TXB     0x0002
-#define UCC_BISYNC_UCCE_RXB     0x0001
-
-/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
-#define UCC_GETH_UCCE_MPD       0x80000000
-#define UCC_GETH_UCCE_SCAR      0x40000000
-#define UCC_GETH_UCCE_GRA       0x20000000
-#define UCC_GETH_UCCE_CBPR      0x10000000
-#define UCC_GETH_UCCE_BSY       0x08000000
-#define UCC_GETH_UCCE_RXC       0x04000000
-#define UCC_GETH_UCCE_TXC       0x02000000
-#define UCC_GETH_UCCE_TXE       0x01000000
-#define UCC_GETH_UCCE_TXB7      0x00800000
-#define UCC_GETH_UCCE_TXB6      0x00400000
-#define UCC_GETH_UCCE_TXB5      0x00200000
-#define UCC_GETH_UCCE_TXB4      0x00100000
-#define UCC_GETH_UCCE_TXB3      0x00080000
-#define UCC_GETH_UCCE_TXB2      0x00040000
-#define UCC_GETH_UCCE_TXB1      0x00020000
-#define UCC_GETH_UCCE_TXB0      0x00010000
-#define UCC_GETH_UCCE_RXB7      0x00008000
-#define UCC_GETH_UCCE_RXB6      0x00004000
-#define UCC_GETH_UCCE_RXB5      0x00002000
-#define UCC_GETH_UCCE_RXB4      0x00001000
-#define UCC_GETH_UCCE_RXB3      0x00000800
-#define UCC_GETH_UCCE_RXB2      0x00000400
-#define UCC_GETH_UCCE_RXB1      0x00000200
-#define UCC_GETH_UCCE_RXB0      0x00000100
-#define UCC_GETH_UCCE_RXF7      0x00000080
-#define UCC_GETH_UCCE_RXF6      0x00000040
-#define UCC_GETH_UCCE_RXF5      0x00000020
-#define UCC_GETH_UCCE_RXF4      0x00000010
-#define UCC_GETH_UCCE_RXF3      0x00000008
-#define UCC_GETH_UCCE_RXF2      0x00000004
-#define UCC_GETH_UCCE_RXF1      0x00000002
-#define UCC_GETH_UCCE_RXF0      0x00000001
-
-/* UPSMR, when used as a UART */
-#define UCC_UART_UPSMR_FLC              0x8000
-#define UCC_UART_UPSMR_SL               0x4000
-#define UCC_UART_UPSMR_CL_MASK          0x3000
-#define UCC_UART_UPSMR_CL_8             0x3000
-#define UCC_UART_UPSMR_CL_7             0x2000
-#define UCC_UART_UPSMR_CL_6             0x1000
-#define UCC_UART_UPSMR_CL_5             0x0000
-#define UCC_UART_UPSMR_UM_MASK          0x0c00
-#define UCC_UART_UPSMR_UM_NORMAL        0x0000
-#define UCC_UART_UPSMR_UM_MAN_MULTI     0x0400
-#define UCC_UART_UPSMR_UM_AUTO_MULTI    0x0c00
-#define UCC_UART_UPSMR_FRZ              0x0200
-#define UCC_UART_UPSMR_RZS              0x0100
-#define UCC_UART_UPSMR_SYN              0x0080
-#define UCC_UART_UPSMR_DRT              0x0040
-#define UCC_UART_UPSMR_PEN              0x0010
-#define UCC_UART_UPSMR_RPM_MASK         0x000c
-#define UCC_UART_UPSMR_RPM_ODD          0x0000
-#define UCC_UART_UPSMR_RPM_LOW          0x0004
-#define UCC_UART_UPSMR_RPM_EVEN         0x0008
-#define UCC_UART_UPSMR_RPM_HIGH         0x000C
-#define UCC_UART_UPSMR_TPM_MASK         0x0003
-#define UCC_UART_UPSMR_TPM_ODD          0x0000
-#define UCC_UART_UPSMR_TPM_LOW          0x0001
-#define UCC_UART_UPSMR_TPM_EVEN         0x0002
-#define UCC_UART_UPSMR_TPM_HIGH         0x0003
-
-/* UCC Transmit On Demand Register (UTODR) */
-#define UCC_SLOW_TOD    0x8000
-#define UCC_FAST_TOD    0x8000
-
-/* UCC Bus Mode Register masks */
-/* Not to be confused with the Bundle Mode Register */
-#define UCC_BMR_GBL             0x20
-#define UCC_BMR_BO_BE           0x10
-#define UCC_BMR_CETM            0x04
-#define UCC_BMR_DTB             0x02
-#define UCC_BMR_BDB             0x01
-
-/* Function code masks */
-#define FC_GBL                          0x20
-#define FC_DTB_LCL                      0x02
-#define UCC_FAST_FUNCTION_CODE_GBL      0x20
-#define UCC_FAST_FUNCTION_CODE_DTB_LCL  0x02
-#define UCC_FAST_FUNCTION_CODE_BDB_LCL  0x01
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h
deleted file mode 100644
index a779b2c9eaf1..000000000000
--- a/include/asm-powerpc/qe_ic.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * include/asm-powerpc/qe_ic.h
- *
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors:     Shlomi Gridish <gridish@freescale.com>
- *              Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE IC external definitions and structure.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_IC_H
-#define _ASM_POWERPC_QE_IC_H
-
-#include <linux/irq.h>
-
-#define NUM_OF_QE_IC_GROUPS     6
-
-/* Flags when we init the QE IC */
-#define QE_IC_SPREADMODE_GRP_W                  0x00000001
-#define QE_IC_SPREADMODE_GRP_X                  0x00000002
-#define QE_IC_SPREADMODE_GRP_Y                  0x00000004
-#define QE_IC_SPREADMODE_GRP_Z                  0x00000008
-#define QE_IC_SPREADMODE_GRP_RISCA              0x00000010
-#define QE_IC_SPREADMODE_GRP_RISCB              0x00000020
-
-#define QE_IC_LOW_SIGNAL                        0x00000100
-#define QE_IC_HIGH_SIGNAL                       0x00000200
-
-#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH       0x00001000
-#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH       0x00002000
-#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH       0x00004000
-#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH       0x00008000
-#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH       0x00010000
-#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH       0x00020000
-#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH       0x00040000
-#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH       0x00080000
-#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH   0x00100000
-#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH   0x00200000
-#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH   0x00400000
-#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH   0x00800000
-#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT           (12)
-
-/* QE interrupt sources groups */
-enum qe_ic_grp_id {
-        QE_IC_GRP_W = 0,        /* QE interrupt controller group W */
-        QE_IC_GRP_X,            /* QE interrupt controller group X */
-        QE_IC_GRP_Y,            /* QE interrupt controller group Y */
-        QE_IC_GRP_Z,            /* QE interrupt controller group Z */
-        QE_IC_GRP_RISCA,        /* QE interrupt controller RISC group A */
-        QE_IC_GRP_RISCB         /* QE interrupt controller RISC group B */
-};
-
-void qe_ic_init(struct device_node *node, unsigned int flags,
-                void (*low_handler)(unsigned int irq, struct irq_desc *desc),
-                void (*high_handler)(unsigned int irq, struct irq_desc *desc));
-void qe_ic_set_highest_priority(unsigned int virq, int high);
-int qe_ic_set_priority(unsigned int virq, unsigned int priority);
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
-
-struct qe_ic;
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
-
-static inline void qe_ic_cascade_low_ipic(unsigned int irq,
-                                          struct irq_desc *desc)
-{
-        struct qe_ic *qe_ic = desc->handler_data;
-        unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-        if (cascade_irq != NO_IRQ)
-                generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_high_ipic(unsigned int irq,
-                                           struct irq_desc *desc)
-{
-        struct qe_ic *qe_ic = desc->handler_data;
-        unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-
-        if (cascade_irq != NO_IRQ)
-                generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_low_mpic(unsigned int irq,
-                                          struct irq_desc *desc)
-{
-        struct qe_ic *qe_ic = desc->handler_data;
-        unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-        if (cascade_irq != NO_IRQ)
-                generic_handle_irq(cascade_irq);
-
-        desc->chip->eoi(irq);
-}
-
-static inline void qe_ic_cascade_high_mpic(unsigned int irq,
-                                           struct irq_desc *desc)
-{
-        struct qe_ic *qe_ic = desc->handler_data;
-        unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-
-        if (cascade_irq != NO_IRQ)
-                generic_handle_irq(cascade_irq);
-
-        desc->chip->eoi(irq);
-}
-
-static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
-                                            struct irq_desc *desc)
-{
-        struct qe_ic *qe_ic = desc->handler_data;
-        unsigned int cascade_irq;
-
-        cascade_irq = qe_ic_get_high_irq(qe_ic);
-        if (cascade_irq == NO_IRQ)
-                cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-        if (cascade_irq != NO_IRQ)
-                generic_handle_irq(cascade_irq);
-
-        desc->chip->eoi(irq);
-}
-
-#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
deleted file mode 100644
index c6d1ab650778..000000000000
--- a/include/asm-powerpc/reg.h
+++ /dev/null
@@ -1,788 +0,0 @@
-/*
- * Contains the definition of registers common to all PowerPC variants.
- * If a register definition has been changed in a different PowerPC
- * variant, we will case it in #ifndef XXX ... #endif, and have the
- * number used in the Programming Environments Manual For 32-Bit
- * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
- */
-
-#ifndef _ASM_POWERPC_REG_H
-#define _ASM_POWERPC_REG_H
-#ifdef __KERNEL__
-
-#include <linux/stringify.h>
-#include <asm/cputable.h>
-
-/* Pickup Book E specific registers. */
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-#include <asm/reg_booke.h>
-#endif /* CONFIG_BOOKE || CONFIG_40x */
-
-#ifdef CONFIG_FSL_EMB_PERFMON
-#include <asm/reg_fsl_emb.h>
-#endif
-
-#ifdef CONFIG_8xx
-#include <asm/reg_8xx.h>
-#endif /* CONFIG_8xx */
-
-#define MSR_SF_LG       63              /* Enable 64 bit mode */
-#define MSR_ISF_LG      61              /* Interrupt 64b mode valid on 630 */
-#define MSR_HV_LG       60              /* Hypervisor state */
-#define MSR_VEC_LG      25              /* Enable AltiVec */
-#define MSR_VSX_LG      23              /* Enable VSX */
-#define MSR_POW_LG      18              /* Enable Power Management */
-#define MSR_WE_LG       18              /* Wait State Enable */
-#define MSR_TGPR_LG     17              /* TLB Update registers in use */
-#define MSR_CE_LG       17              /* Critical Interrupt Enable */
-#define MSR_ILE_LG      16              /* Interrupt Little Endian */
-#define MSR_EE_LG       15              /* External Interrupt Enable */
-#define MSR_PR_LG       14              /* Problem State / Privilege Level */
-#define MSR_FP_LG       13              /* Floating Point enable */
-#define MSR_ME_LG       12              /* Machine Check Enable */
-#define MSR_FE0_LG      11              /* Floating Exception mode 0 */
-#define MSR_SE_LG       10              /* Single Step */
-#define MSR_BE_LG       9               /* Branch Trace */
-#define MSR_DE_LG       9               /* Debug Exception Enable */
-#define MSR_FE1_LG      8               /* Floating Exception mode 1 */
-#define MSR_IP_LG       6               /* Exception prefix 0x000/0xFFF */
-#define MSR_IR_LG       5               /* Instruction Relocate */
-#define MSR_DR_LG       4               /* Data Relocate */
-#define MSR_PE_LG       3               /* Protection Enable */
-#define MSR_PX_LG       2               /* Protection Exclusive Mode */
-#define MSR_PMM_LG      2               /* Performance monitor */
-#define MSR_RI_LG       1               /* Recoverable Exception */
-#define MSR_LE_LG       0               /* Little Endian */
-
-#ifdef __ASSEMBLY__
-#define __MASK(X)       (1<<(X))
-#else
-#define __MASK(X)       (1UL<<(X))
-#endif
-
-#ifdef CONFIG_PPC64
-#define MSR_SF          __MASK(MSR_SF_LG)       /* Enable 64 bit mode */
-#define MSR_ISF         __MASK(MSR_ISF_LG)      /* Interrupt 64b mode valid on 630 */
-#define MSR_HV          __MASK(MSR_HV_LG)       /* Hypervisor state */
-#else
-/* so tests for these bits fail on 32-bit */
-#define MSR_SF          0
-#define MSR_ISF         0
-#define MSR_HV          0
-#endif
-
-#define MSR_VEC         __MASK(MSR_VEC_LG)      /* Enable AltiVec */
-#define MSR_VSX         __MASK(MSR_VSX_LG)      /* Enable VSX */
-#define MSR_POW         __MASK(MSR_POW_LG)      /* Enable Power Management */
-#define MSR_WE          __MASK(MSR_WE_LG)       /* Wait State Enable */
-#define MSR_TGPR        __MASK(MSR_TGPR_LG)     /* TLB Update registers in use */
-#define MSR_CE          __MASK(MSR_CE_LG)       /* Critical Interrupt Enable */
-#define MSR_ILE         __MASK(MSR_ILE_LG)      /* Interrupt Little Endian */
-#define MSR_EE          __MASK(MSR_EE_LG)       /* External Interrupt Enable */
-#define MSR_PR          __MASK(MSR_PR_LG)       /* Problem State / Privilege Level */
-#define MSR_FP          __MASK(MSR_FP_LG)       /* Floating Point enable */
-#define MSR_ME          __MASK(MSR_ME_LG)       /* Machine Check Enable */
-#define MSR_FE0         __MASK(MSR_FE0_LG)      /* Floating Exception mode 0 */
-#define MSR_SE          __MASK(MSR_SE_LG)       /* Single Step */
-#define MSR_BE          __MASK(MSR_BE_LG)       /* Branch Trace */
-#define MSR_DE          __MASK(MSR_DE_LG)       /* Debug Exception Enable */
-#define MSR_FE1         __MASK(MSR_FE1_LG)      /* Floating Exception mode 1 */
-#define MSR_IP          __MASK(MSR_IP_LG)       /* Exception prefix 0x000/0xFFF */
-#define MSR_IR          __MASK(MSR_IR_LG)       /* Instruction Relocate */
-#define MSR_DR          __MASK(MSR_DR_LG)       /* Data Relocate */
-#define MSR_PE          __MASK(MSR_PE_LG)       /* Protection Enable */
-#define MSR_PX          __MASK(MSR_PX_LG)       /* Protection Exclusive Mode */
-#ifndef MSR_PMM
-#define MSR_PMM         __MASK(MSR_PMM_LG)      /* Performance monitor */
-#endif
-#define MSR_RI          __MASK(MSR_RI_LG)       /* Recoverable Exception */
-#define MSR_LE          __MASK(MSR_LE_LG)       /* Little Endian */
-
-#ifdef CONFIG_PPC64
-#define MSR_            MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
-#define MSR_KERNEL      MSR_ | MSR_SF
-
-#define MSR_USER32      MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64      MSR_USER32 | MSR_SF
-
-#else /* 32-bit */
-/* Default MSR for kernel mode. */
-#ifndef MSR_KERNEL      /* reg_booke.h also defines this */
-#define MSR_KERNEL      (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
-#endif
-
-#define MSR_USER        (MSR_KERNEL|MSR_PR|MSR_EE)
-#endif
-
-/* Floating Point Status and Control Register (FPSCR) Fields */
-#define FPSCR_FX        0x80000000      /* FPU exception summary */
-#define FPSCR_FEX       0x40000000      /* FPU enabled exception summary */
-#define FPSCR_VX        0x20000000      /* Invalid operation summary */
-#define FPSCR_OX        0x10000000      /* Overflow exception summary */
-#define FPSCR_UX        0x08000000      /* Underflow exception summary */
-#define FPSCR_ZX        0x04000000      /* Zero-divide exception summary */
-#define FPSCR_XX        0x02000000      /* Inexact exception summary */
-#define FPSCR_VXSNAN    0x01000000      /* Invalid op for SNaN */
-#define FPSCR_VXISI     0x00800000      /* Invalid op for Inv - Inv */
-#define FPSCR_VXIDI     0x00400000      /* Invalid op for Inv / Inv */
-#define FPSCR_VXZDZ     0x00200000      /* Invalid op for Zero / Zero */
-#define FPSCR_VXIMZ     0x00100000      /* Invalid op for Inv * Zero */
-#define FPSCR_VXVC      0x00080000      /* Invalid op for Compare */
-#define FPSCR_FR        0x00040000      /* Fraction rounded */
-#define FPSCR_FI        0x00020000      /* Fraction inexact */
-#define FPSCR_FPRF      0x0001f000      /* FPU Result Flags */
-#define FPSCR_FPCC      0x0000f000      /* FPU Condition Codes */
-#define FPSCR_VXSOFT    0x00000400      /* Invalid op for software request */
-#define FPSCR_VXSQRT    0x00000200      /* Invalid op for square root */
-#define FPSCR_VXCVI     0x00000100      /* Invalid op for integer convert */
-#define FPSCR_VE        0x00000080      /* Invalid op exception enable */
-#define FPSCR_OE        0x00000040      /* IEEE overflow exception enable */
-#define FPSCR_UE        0x00000020      /* IEEE underflow exception enable */
-#define FPSCR_ZE        0x00000010      /* IEEE zero divide exception enable */
-#define FPSCR_XE        0x00000008      /* FP inexact exception enable */
-#define FPSCR_NI        0x00000004      /* FPU non IEEE-Mode */
-#define FPSCR_RN        0x00000003      /* FPU rounding control */
-
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_CTR        0x009   /* Count Register */
-#define SPRN_DSCR       0x11
-#define SPRN_CTRLF      0x088
-#define SPRN_CTRLT      0x098
-#define   CTRL_CT       0xc0000000      /* current thread */
-#define   CTRL_CT0      0x80000000      /* thread 0 */
-#define   CTRL_CT1      0x40000000      /* thread 1 */
-#define   CTRL_TE       0x00c00000      /* thread enable */
-#define   CTRL_RUNLATCH 0x1
-#define SPRN_DABR       0x3F5   /* Data Address Breakpoint Register */
-#define   DABR_TRANSLATION      (1UL << 2)
-#define SPRN_DABR2      0x13D   /* e300 */
-#define SPRN_DABRX      0x3F7   /* Data Address Breakpoint Register Extension */
-#define   DABRX_USER    (1UL << 0)
-#define   DABRX_KERNEL  (1UL << 1)
-#define SPRN_DAR        0x013   /* Data Address Register */
-#define SPRN_DBCR       0x136   /* e300 Data Breakpoint Control Reg */
-#define SPRN_DSISR      0x012   /* Data Storage Interrupt Status Register */
-#define   DSISR_NOHPTE          0x40000000      /* no translation found */
-#define   DSISR_PROTFAULT       0x08000000      /* protection fault */
-#define   DSISR_ISSTORE         0x02000000      /* access was a store */
-#define   DSISR_DABRMATCH       0x00400000      /* hit data breakpoint */
-#define   DSISR_NOSEGMENT       0x00200000      /* STAB/SLB miss */
-#define SPRN_TBRL       0x10C   /* Time Base Read Lower Register (user, R/O) */
-#define SPRN_TBRU       0x10D   /* Time Base Read Upper Register (user, R/O) */
-#define SPRN_TBWL       0x11C   /* Time Base Lower Register (super, R/W) */
-#define SPRN_TBWU       0x11D   /* Time Base Upper Register (super, R/W) */
-#define SPRN_SPURR      0x134   /* Scaled PURR */
-#define SPRN_HIOR       0x137   /* 970 Hypervisor interrupt offset */
-#define SPRN_LPCR       0x13E   /* LPAR Control Register */
-#define SPRN_DBAT0L     0x219   /* Data BAT 0 Lower Register */
-#define SPRN_DBAT0U     0x218   /* Data BAT 0 Upper Register */
-#define SPRN_DBAT1L     0x21B   /* Data BAT 1 Lower Register */
-#define SPRN_DBAT1U     0x21A   /* Data BAT 1 Upper Register */
-#define SPRN_DBAT2L     0x21D   /* Data BAT 2 Lower Register */
-#define SPRN_DBAT2U     0x21C   /* Data BAT 2 Upper Register */
-#define SPRN_DBAT3L     0x21F   /* Data BAT 3 Lower Register */
-#define SPRN_DBAT3U     0x21E   /* Data BAT 3 Upper Register */
-#define SPRN_DBAT4L     0x239   /* Data BAT 4 Lower Register */
-#define SPRN_DBAT4U     0x238   /* Data BAT 4 Upper Register */
-#define SPRN_DBAT5L     0x23B   /* Data BAT 5 Lower Register */
-#define SPRN_DBAT5U     0x23A   /* Data BAT 5 Upper Register */
-#define SPRN_DBAT6L     0x23D   /* Data BAT 6 Lower Register */
-#define SPRN_DBAT6U     0x23C   /* Data BAT 6 Upper Register */
-#define SPRN_DBAT7L     0x23F   /* Data BAT 7 Lower Register */
-#define SPRN_DBAT7U     0x23E   /* Data BAT 7 Upper Register */
-
-#define SPRN_DEC        0x016           /* Decrement Register */
-#define SPRN_DER        0x095           /* Debug Enable Regsiter */
-#define DER_RSTE        0x40000000      /* Reset Interrupt */
-#define DER_CHSTPE      0x20000000      /* Check Stop */
-#define DER_MCIE        0x10000000      /* Machine Check Interrupt */
-#define DER_EXTIE       0x02000000      /* External Interrupt */
-#define DER_ALIE        0x01000000      /* Alignment Interrupt */
-#define DER_PRIE        0x00800000      /* Program Interrupt */
-#define DER_FPUVIE      0x00400000      /* FP Unavailable Interrupt */
-#define DER_DECIE       0x00200000      /* Decrementer Interrupt */
-#define DER_SYSIE       0x00040000      /* System Call Interrupt */
-#define DER_TRE         0x00020000      /* Trace Interrupt */
-#define DER_SEIE        0x00004000      /* FP SW Emulation Interrupt */
-#define DER_ITLBMSE     0x00002000      /* Imp. Spec. Instruction TLB Miss */
-#define DER_ITLBERE     0x00001000      /* Imp. Spec. Instruction TLB Error */
-#define DER_DTLBMSE     0x00000800      /* Imp. Spec. Data TLB Miss */
-#define DER_DTLBERE     0x00000400      /* Imp. Spec. Data TLB Error */
-#define DER_LBRKE       0x00000008      /* Load/Store Breakpoint Interrupt */
-#define DER_IBRKE       0x00000004      /* Instruction Breakpoint Interrupt */
-#define DER_EBRKE       0x00000002      /* External Breakpoint Interrupt */
-#define DER_DPIE        0x00000001      /* Dev. Port Nonmaskable Request */
-#define SPRN_DMISS      0x3D0           /* Data TLB Miss Register */
-#define SPRN_EAR        0x11A           /* External Address Register */
-#define SPRN_HASH1      0x3D2           /* Primary Hash Address Register */
-#define SPRN_HASH2      0x3D3           /* Secondary Hash Address Resgister */
-#define SPRN_HID0       0x3F0           /* Hardware Implementation Register 0 */
-#define HID0_EMCP       (1<<31)         /* Enable Machine Check pin */
-#define HID0_EBA        (1<<29)         /* Enable Bus Address Parity */
-#define HID0_EBD        (1<<28)         /* Enable Bus Data Parity */
-#define HID0_SBCLK      (1<<27)
-#define HID0_EICE       (1<<26)
-#define HID0_TBEN       (1<<26)         /* Timebase enable - 745x */
-#define HID0_ECLK       (1<<25)
-#define HID0_PAR        (1<<24)
-#define HID0_STEN       (1<<24)         /* Software table search enable - 745x */
-#define HID0_HIGH_BAT   (1<<23)         /* Enable high BATs - 7455 */
-#define HID0_DOZE       (1<<23)
-#define HID0_NAP        (1<<22)
-#define HID0_SLEEP      (1<<21)
-#define HID0_DPM        (1<<20)
-#define HID0_BHTCLR     (1<<18)         /* Clear branch history table - 7450 */
-#define HID0_XAEN       (1<<17)         /* Extended addressing enable - 7450 */
-#define HID0_NHR        (1<<16)         /* Not hard reset (software bit-7450)*/
-#define HID0_ICE        (1<<15)         /* Instruction Cache Enable */
-#define HID0_DCE        (1<<14)         /* Data Cache Enable */
-#define HID0_ILOCK      (1<<13)         /* Instruction Cache Lock */
-#define HID0_DLOCK      (1<<12)         /* Data Cache Lock */
-#define HID0_ICFI       (1<<11)         /* Instr. Cache Flash Invalidate */
-#define HID0_DCI        (1<<10)         /* Data Cache Invalidate */
-#define HID0_SPD        (1<<9)          /* Speculative disable */
-#define HID0_DAPUEN     (1<<8)          /* Debug APU enable */
-#define HID0_SGE        (1<<7)          /* Store Gathering Enable */
-#define HID0_SIED       (1<<7)          /* Serial Instr. Execution [Disable] */
-#define HID0_DCFA       (1<<6)          /* Data Cache Flush Assist */
-#define HID0_LRSTK      (1<<4)          /* Link register stack - 745x */
-#define HID0_BTIC       (1<<5)          /* Branch Target Instr Cache Enable */
-#define HID0_ABE        (1<<3)          /* Address Broadcast Enable */
-#define HID0_FOLD       (1<<3)          /* Branch Folding enable - 745x */
-#define HID0_BHTE       (1<<2)          /* Branch History Table Enable */
-#define HID0_BTCD       (1<<1)          /* Branch target cache disable */
-#define HID0_NOPDST     (1<<1)          /* No-op dst, dstt, etc. instr. */
-#define HID0_NOPTI      (1<<0)          /* No-op dcbt and dcbst instr. */
-
-#define SPRN_HID1       0x3F1           /* Hardware Implementation Register 1 */
-#define HID1_EMCP       (1<<31)         /* 7450 Machine Check Pin Enable */
-#define HID1_DFS        (1<<22)         /* 7447A Dynamic Frequency Scaling */
-#define HID1_PC0        (1<<16)         /* 7450 PLL_CFG[0] */
-#define HID1_PC1        (1<<15)         /* 7450 PLL_CFG[1] */
-#define HID1_PC2        (1<<14)         /* 7450 PLL_CFG[2] */
-#define HID1_PC3        (1<<13)         /* 7450 PLL_CFG[3] */
-#define HID1_SYNCBE     (1<<11)         /* 7450 ABE for sync, eieio */
-#define HID1_ABE        (1<<10)         /* 7450 Address Broadcast Enable */
-#define HID1_PS         (1<<16)         /* 750FX PLL selection */
-#define SPRN_HID2       0x3F8           /* Hardware Implementation Register 2 */
-#define SPRN_IABR       0x3F2   /* Instruction Address Breakpoint Register */
-#define SPRN_IABR2      0x3FA           /* 83xx */
-#define SPRN_IBCR       0x135           /* 83xx Insn Breakpoint Control Reg */
-#define SPRN_HID4       0x3F4           /* 970 HID4 */
-#define SPRN_HID5       0x3F6           /* 970 HID5 */
-#define SPRN_HID6       0x3F9   /* BE HID 6 */
-#define   HID6_LB       (0x0F<<12) /* Concurrent Large Page Modes */
-#define   HID6_DLP      (1<<20) /* Disable all large page modes (4K only) */
-#define SPRN_TSC_CELL   0x399   /* Thread switch control on Cell */
-#define   TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */
-#define   TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */
-#define   TSC_CELL_EE_ENABLE    0x100000 /* External Interrupt */
-#define   TSC_CELL_EE_BOOST     0x080000 /* External Interrupt Boost */
-#define SPRN_TSC        0x3FD   /* Thread switch control on others */
-#define SPRN_TST        0x3FC   /* Thread switch timeout on others */
-#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
-#define SPRN_IAC1       0x3F4           /* Instruction Address Compare 1 */
-#define SPRN_IAC2       0x3F5           /* Instruction Address Compare 2 */
-#endif
-#define SPRN_IBAT0L     0x211           /* Instruction BAT 0 Lower Register */
-#define SPRN_IBAT0U     0x210           /* Instruction BAT 0 Upper Register */
-#define SPRN_IBAT1L     0x213           /* Instruction BAT 1 Lower Register */
-#define SPRN_IBAT1U     0x212           /* Instruction BAT 1 Upper Register */
-#define SPRN_IBAT2L     0x215           /* Instruction BAT 2 Lower Register */
-#define SPRN_IBAT2U     0x214           /* Instruction BAT 2 Upper Register */
-#define SPRN_IBAT3L     0x217           /* Instruction BAT 3 Lower Register */
-#define SPRN_IBAT3U     0x216           /* Instruction BAT 3 Upper Register */
-#define SPRN_IBAT4L     0x231           /* Instruction BAT 4 Lower Register */
-#define SPRN_IBAT4U     0x230           /* Instruction BAT 4 Upper Register */
-#define SPRN_IBAT5L     0x233           /* Instruction BAT 5 Lower Register */
-#define SPRN_IBAT5U     0x232           /* Instruction BAT 5 Upper Register */
-#define SPRN_IBAT6L     0x235           /* Instruction BAT 6 Lower Register */
-#define SPRN_IBAT6U     0x234           /* Instruction BAT 6 Upper Register */
-#define SPRN_IBAT7L     0x237           /* Instruction BAT 7 Lower Register */
-#define SPRN_IBAT7U     0x236           /* Instruction BAT 7 Upper Register */
-#define SPRN_ICMP       0x3D5           /* Instruction TLB Compare Register */
-#define SPRN_ICTC       0x3FB   /* Instruction Cache Throttling Control Reg */
-#define SPRN_ICTRL      0x3F3   /* 1011 7450 icache and interrupt ctrl */
-#define ICTRL_EICE      0x08000000      /* enable icache parity errs */
-#define ICTRL_EDC       0x04000000      /* enable dcache parity errs */
-#define ICTRL_EICP      0x00000100      /* enable icache par. check */
-#define SPRN_IMISS      0x3D4           /* Instruction TLB Miss Register */
-#define SPRN_IMMR       0x27E           /* Internal Memory Map Register */
-#define SPRN_L2CR       0x3F9           /* Level 2 Cache Control Regsiter */
-#define SPRN_L2CR2      0x3f8
-#define L2CR_L2E                0x80000000      /* L2 enable */
-#define L2CR_L2PE               0x40000000      /* L2 parity enable */
-#define L2CR_L2SIZ_MASK         0x30000000      /* L2 size mask */
-#define L2CR_L2SIZ_256KB        0x10000000      /* L2 size 256KB */
-#define L2CR_L2SIZ_512KB        0x20000000      /* L2 size 512KB */
-#define L2CR_L2SIZ_1MB          0x30000000      /* L2 size 1MB */
-#define L2CR_L2CLK_MASK         0x0e000000      /* L2 clock mask */
-#define L2CR_L2CLK_DISABLED     0x00000000      /* L2 clock disabled */
-#define L2CR_L2CLK_DIV1         0x02000000      /* L2 clock / 1 */
-#define L2CR_L2CLK_DIV1_5       0x04000000      /* L2 clock / 1.5 */
-#define L2CR_L2CLK_DIV2         0x08000000      /* L2 clock / 2 */
-#define L2CR_L2CLK_DIV2_5       0x0a000000      /* L2 clock / 2.5 */
-#define L2CR_L2CLK_DIV3         0x0c000000      /* L2 clock / 3 */
-#define L2CR_L2RAM_MASK         0x01800000      /* L2 RAM type mask */
-#define L2CR_L2RAM_FLOW         0x00000000      /* L2 RAM flow through */
-#define L2CR_L2RAM_PIPE         0x01000000      /* L2 RAM pipelined */
-#define L2CR_L2RAM_PIPE_LW      0x01800000      /* L2 RAM pipelined latewr */
-#define L2CR_L2DO               0x00400000      /* L2 data only */
-#define L2CR_L2I                0x00200000      /* L2 global invalidate */
-#define L2CR_L2CTL              0x00100000      /* L2 RAM control */
-#define L2CR_L2WT               0x00080000      /* L2 write-through */
-#define L2CR_L2TS               0x00040000      /* L2 test support */
-#define L2CR_L2OH_MASK          0x00030000      /* L2 output hold mask */
-#define L2CR_L2OH_0_5           0x00000000      /* L2 output hold 0.5 ns */
-#define L2CR_L2OH_1_0           0x00010000      /* L2 output hold 1.0 ns */
-#define L2CR_L2SL               0x00008000      /* L2 DLL slow */
-#define L2CR_L2DF               0x00004000      /* L2 differential clock */
-#define L2CR_L2BYP              0x00002000      /* L2 DLL bypass */
-#define L2CR_L2IP               0x00000001      /* L2 GI in progress */
-#define L2CR_L2IO_745x          0x00100000      /* L2 instr. only (745x) */
-#define L2CR_L2DO_745x          0x00010000      /* L2 data only (745x) */
-#define L2CR_L2REP_745x         0x00001000      /* L2 repl. algorithm (745x) */
-#define L2CR_L2HWF_745x         0x00000800      /* L2 hardware flush (745x) */
-#define SPRN_L3CR               0x3FA   /* Level 3 Cache Control Regsiter */
-#define L3CR_L3E                0x80000000      /* L3 enable */
-#define L3CR_L3PE               0x40000000      /* L3 data parity enable */
-#define L3CR_L3APE              0x20000000      /* L3 addr parity enable */
-#define L3CR_L3SIZ              0x10000000      /* L3 size */
-#define L3CR_L3CLKEN            0x08000000      /* L3 clock enable */
-#define L3CR_L3RES              0x04000000      /* L3 special reserved bit */
-#define L3CR_L3CLKDIV           0x03800000      /* L3 clock divisor */
-#define L3CR_L3IO               0x00400000      /* L3 instruction only */
-#define L3CR_L3SPO              0x00040000      /* L3 sample point override */
-#define L3CR_L3CKSP             0x00030000      /* L3 clock sample point */
-#define L3CR_L3PSP              0x0000e000      /* L3 P-clock sample point */
-#define L3CR_L3REP              0x00001000      /* L3 replacement algorithm */
-#define L3CR_L3HWF              0x00000800      /* L3 hardware flush */
-#define L3CR_L3I                0x00000400      /* L3 global invalidate */
-#define L3CR_L3RT               0x00000300      /* L3 SRAM type */
-#define L3CR_L3NIRCA            0x00000080      /* L3 non-integer ratio clock adj. */
-#define L3CR_L3DO               0x00000040      /* L3 data only mode */
-#define L3CR_PMEN               0x00000004      /* L3 private memory enable */
-#define L3CR_PMSIZ              0x00000001      /* L3 private memory size */
-
-#define SPRN_MSSCR0     0x3f6   /* Memory Subsystem Control Register 0 */
-#define SPRN_MSSSR0     0x3f7   /* Memory Subsystem Status Register 1 */
-#define SPRN_LDSTCR     0x3f8   /* Load/Store control register */
-#define SPRN_LDSTDB     0x3f4   /* */
-#define SPRN_LR         0x008   /* Link Register */
-#ifndef SPRN_PIR
-#define SPRN_PIR        0x3FF   /* Processor Identification Register */
-#endif
-#define SPRN_PTEHI      0x3D5   /* 981 7450 PTE HI word (S/W TLB load) */
-#define SPRN_PTELO      0x3D6   /* 982 7450 PTE LO word (S/W TLB load) */
-#define SPRN_PURR       0x135   /* Processor Utilization of Resources Reg */
-#define SPRN_PVR        0x11F   /* Processor Version Register */
-#define SPRN_RPA        0x3D6   /* Required Physical Address Register */
-#define SPRN_SDA        0x3BF   /* Sampled Data Address Register */
-#define SPRN_SDR1       0x019   /* MMU Hash Base Register */
-#define SPRN_ASR        0x118   /* Address Space Register */
-#define SPRN_SIA        0x3BB   /* Sampled Instruction Address Register */
-#define SPRN_SPRG0      0x110   /* Special Purpose Register General 0 */
-#define SPRN_SPRG1      0x111   /* Special Purpose Register General 1 */
-#define SPRN_SPRG2      0x112   /* Special Purpose Register General 2 */
-#define SPRN_SPRG3      0x113   /* Special Purpose Register General 3 */
-#define SPRN_SPRG4      0x114   /* Special Purpose Register General 4 */
-#define SPRN_SPRG5      0x115   /* Special Purpose Register General 5 */
-#define SPRN_SPRG6      0x116   /* Special Purpose Register General 6 */
-#define SPRN_SPRG7      0x117   /* Special Purpose Register General 7 */
-#define SPRN_SRR0       0x01A   /* Save/Restore Register 0 */
-#define SPRN_SRR1       0x01B   /* Save/Restore Register 1 */
-#define   SRR1_WAKEMASK         0x00380000 /* reason for wakeup */
-#define   SRR1_WAKERESET        0x00380000 /* System reset */
-#define   SRR1_WAKESYSERR       0x00300000 /* System error */
-#define   SRR1_WAKEEE           0x00200000 /* External interrupt */
-#define   SRR1_WAKEMT           0x00280000 /* mtctrl */
-#define   SRR1_WAKEDEC          0x00180000 /* Decrementer interrupt */
-#define   SRR1_WAKETHERM        0x00100000 /* Thermal management interrupt */
-#define SPRN_HSRR0      0x13A   /* Save/Restore Register 0 */
-#define SPRN_HSRR1      0x13B   /* Save/Restore Register 1 */
-
-#define SPRN_TBCTL      0x35f   /* PA6T Timebase control register */
-#define   TBCTL_FREEZE          0x0000000000000000ull /* Freeze all tbs */
-#define   TBCTL_RESTART         0x0000000100000000ull /* Restart all tbs */
-#define   TBCTL_UPDATE_UPPER    0x0000000200000000ull /* Set upper 32 bits */
-#define   TBCTL_UPDATE_LOWER    0x0000000300000000ull /* Set lower 32 bits */
-
-#ifndef SPRN_SVR
-#define SPRN_SVR        0x11E   /* System Version Register */
-#endif
-#define SPRN_THRM1      0x3FC           /* Thermal Management Register 1 */
-/* these bits were defined in inverted endian sense originally, ugh, confusing */
-#define THRM1_TIN       (1 << 31)
-#define THRM1_TIV       (1 << 30)
-#define THRM1_THRES(x)  ((x&0x7f)<<23)
-#define THRM3_SITV(x)   ((x&0x3fff)<<1)
-#define THRM1_TID       (1<<2)
-#define THRM1_TIE       (1<<1)
-#define THRM1_V         (1<<0)
-#define SPRN_THRM2      0x3FD           /* Thermal Management Register 2 */
-#define SPRN_THRM3      0x3FE           /* Thermal Management Register 3 */
-#define THRM3_E         (1<<0)
-#define SPRN_TLBMISS    0x3D4           /* 980 7450 TLB Miss Register */
-#define SPRN_UMMCR0     0x3A8   /* User Monitor Mode Control Register 0 */
-#define SPRN_UMMCR1     0x3AC   /* User Monitor Mode Control Register 0 */
-#define SPRN_UPMC1      0x3A9   /* User Performance Counter Register 1 */
-#define SPRN_UPMC2      0x3AA   /* User Performance Counter Register 2 */
-#define SPRN_UPMC3      0x3AD   /* User Performance Counter Register 3 */
-#define SPRN_UPMC4      0x3AE   /* User Performance Counter Register 4 */
-#define SPRN_USIA       0x3AB   /* User Sampled Instruction Address Register */
-#define SPRN_VRSAVE     0x100   /* Vector Register Save Register */
-#define SPRN_XER        0x001   /* Fixed Point Exception Register */
-
-#define SPRN_SCOMC      0x114   /* SCOM Access Control */
-#define SPRN_SCOMD      0x115   /* SCOM Access DATA */
-
-/* Performance monitor SPRs */
-#ifdef CONFIG_PPC64
-#define SPRN_MMCR0      795
-#define   MMCR0_FC      0x80000000UL /* freeze counters */
-#define   MMCR0_FCS     0x40000000UL /* freeze in supervisor state */
-#define   MMCR0_KERNEL_DISABLE MMCR0_FCS
-#define   MMCR0_FCP     0x20000000UL /* freeze in problem state */
-#define   MMCR0_PROBLEM_DISABLE MMCR0_FCP
-#define   MMCR0_FCM1    0x10000000UL /* freeze counters while MSR mark = 1 */
-#define   MMCR0_FCM0    0x08000000UL /* freeze counters while MSR mark = 0 */
-#define   MMCR0_PMXE    0x04000000UL /* performance monitor exception enable */
-#define   MMCR0_FCECE   0x02000000UL /* freeze ctrs on enabled cond or event */
-#define   MMCR0_TBEE    0x00400000UL /* time base exception enable */
-#define   MMCR0_PMC1CE  0x00008000UL /* PMC1 count enable*/
-#define   MMCR0_PMCjCE  0x00004000UL /* PMCj count enable*/
-#define   MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
-#define   MMCR0_PMAO    0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
-#define   MMCR0_SHRFC   0x00000040UL /* SHRre freeze conditions between threads */
-#define   MMCR0_FCTI    0x00000008UL /* freeze counters in tags inactive mode */
-#define   MMCR0_FCTA    0x00000004UL /* freeze counters in tags active mode */
-#define   MMCR0_FCWAIT  0x00000002UL /* freeze counter in WAIT state */
-#define   MMCR0_FCHV    0x00000001UL /* freeze conditions in hypervisor mode */
-#define SPRN_MMCR1      798
-#define SPRN_MMCRA      0x312
-#define   MMCRA_SIHV    0x10000000UL /* state of MSR HV when SIAR set */
-#define   MMCRA_SIPR    0x08000000UL /* state of MSR PR when SIAR set */
-#define   MMCRA_SLOT    0x07000000UL /* SLOT bits (37-39) */
-#define   MMCRA_SLOT_SHIFT      24
-#define   MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
-#define   POWER6_MMCRA_SIHV   0x0000040000000000ULL
-#define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
-#define   POWER6_MMCRA_THRM     0x00000020UL
-#define   POWER6_MMCRA_OTHER    0x0000000EUL
-#define SPRN_PMC1       787
-#define SPRN_PMC2       788
-#define SPRN_PMC3       789
-#define SPRN_PMC4       790
-#define SPRN_PMC5       791
-#define SPRN_PMC6       792
-#define SPRN_PMC7       793
-#define SPRN_PMC8       794
-#define SPRN_SIAR       780
-#define SPRN_SDAR       781
-
-#define SPRN_PA6T_MMCR0 795
-#define   PA6T_MMCR0_EN0        0x0000000000000001UL
-#define   PA6T_MMCR0_EN1        0x0000000000000002UL
-#define   PA6T_MMCR0_EN2        0x0000000000000004UL
-#define   PA6T_MMCR0_EN3        0x0000000000000008UL
-#define   PA6T_MMCR0_EN4        0x0000000000000010UL
-#define   PA6T_MMCR0_EN5        0x0000000000000020UL
-#define   PA6T_MMCR0_SUPEN      0x0000000000000040UL
-#define   PA6T_MMCR0_PREN       0x0000000000000080UL
-#define   PA6T_MMCR0_HYPEN      0x0000000000000100UL
-#define   PA6T_MMCR0_FCM0       0x0000000000000200UL
-#define   PA6T_MMCR0_FCM1       0x0000000000000400UL
-#define   PA6T_MMCR0_INTGEN     0x0000000000000800UL
-#define   PA6T_MMCR0_INTEN0     0x0000000000001000UL
-#define   PA6T_MMCR0_INTEN1     0x0000000000002000UL
-#define   PA6T_MMCR0_INTEN2     0x0000000000004000UL
-#define   PA6T_MMCR0_INTEN3     0x0000000000008000UL
-#define   PA6T_MMCR0_INTEN4     0x0000000000010000UL
-#define   PA6T_MMCR0_INTEN5     0x0000000000020000UL
-#define   PA6T_MMCR0_DISCNT     0x0000000000040000UL
-#define   PA6T_MMCR0_UOP        0x0000000000080000UL
-#define   PA6T_MMCR0_TRG        0x0000000000100000UL
-#define   PA6T_MMCR0_TRGEN      0x0000000000200000UL
-#define   PA6T_MMCR0_TRGREG     0x0000000001600000UL
-#define   PA6T_MMCR0_SIARLOG    0x0000000002000000UL
-#define   PA6T_MMCR0_SDARLOG    0x0000000004000000UL
-#define   PA6T_MMCR0_PROEN      0x0000000008000000UL
-#define   PA6T_MMCR0_PROLOG     0x0000000010000000UL
-#define   PA6T_MMCR0_DAMEN2     0x0000000020000000UL
-#define   PA6T_MMCR0_DAMEN3     0x0000000040000000UL
-#define   PA6T_MMCR0_DAMEN4     0x0000000080000000UL
-#define   PA6T_MMCR0_DAMEN5     0x0000000100000000UL
-#define   PA6T_MMCR0_DAMSEL2    0x0000000200000000UL
-#define   PA6T_MMCR0_DAMSEL3    0x0000000400000000UL
-#define   PA6T_MMCR0_DAMSEL4    0x0000000800000000UL
-#define   PA6T_MMCR0_DAMSEL5    0x0000001000000000UL
-#define   PA6T_MMCR0_HANDDIS    0x0000002000000000UL
-#define   PA6T_MMCR0_PCTEN      0x0000004000000000UL
-#define   PA6T_MMCR0_SOCEN      0x0000008000000000UL
-#define   PA6T_MMCR0_SOCMOD     0x0000010000000000UL
-
-#define SPRN_PA6T_MMCR1 798
-#define   PA6T_MMCR1_ES2        0x00000000000000ffUL
-#define   PA6T_MMCR1_ES3        0x000000000000ff00UL
-#define   PA6T_MMCR1_ES4        0x0000000000ff0000UL
-#define   PA6T_MMCR1_ES5        0x00000000ff000000UL
-
-#define SPRN_PA6T_UPMC0 771     /* User PerfMon Counter 0 */
-#define SPRN_PA6T_UPMC1 772     /* ... */
-#define SPRN_PA6T_UPMC2 773
-#define SPRN_PA6T_UPMC3 774
-#define SPRN_PA6T_UPMC4 775
-#define SPRN_PA6T_UPMC5 776
-#define SPRN_PA6T_UMMCR0 779    /* User Monitor Mode Control Register 0 */
-#define SPRN_PA6T_SIAR  780     /* Sampled Instruction Address */
-#define SPRN_PA6T_UMMCR1 782    /* User Monitor Mode Control Register 1 */
-#define SPRN_PA6T_SIER  785     /* Sampled Instruction Event Register */
-#define SPRN_PA6T_PMC0  787
-#define SPRN_PA6T_PMC1  788
-#define SPRN_PA6T_PMC2  789
-#define SPRN_PA6T_PMC3  790
-#define SPRN_PA6T_PMC4  791
-#define SPRN_PA6T_PMC5  792
-#define SPRN_PA6T_TSR0  793     /* Timestamp Register 0 */
-#define SPRN_PA6T_TSR1  794     /* Timestamp Register 1 */
-#define SPRN_PA6T_TSR2  799     /* Timestamp Register 2 */
-#define SPRN_PA6T_TSR3  784     /* Timestamp Register 3 */
-
-#define SPRN_PA6T_IER   981     /* Icache Error Register */
-#define SPRN_PA6T_DER   982     /* Dcache Error Register */
-#define SPRN_PA6T_BER   862     /* BIU Error Address Register */
-#define SPRN_PA6T_MER   849     /* MMU Error Register */
-
-#define SPRN_PA6T_IMA0  880     /* Instruction Match Array 0 */
-#define SPRN_PA6T_IMA1  881     /* ... */
-#define SPRN_PA6T_IMA2  882
-#define SPRN_PA6T_IMA3  883
-#define SPRN_PA6T_IMA4  884
-#define SPRN_PA6T_IMA5  885
-#define SPRN_PA6T_IMA6  886
-#define SPRN_PA6T_IMA7  887
-#define SPRN_PA6T_IMA8  888
-#define SPRN_PA6T_IMA9  889
-#define SPRN_PA6T_BTCR  978     /* Breakpoint and Tagging Control Register */
-#define SPRN_PA6T_IMAAT 979     /* Instruction Match Array Action Table */
-#define SPRN_PA6T_PCCR  1019    /* Power Counter Control Register */
-#define SPRN_BKMK       1020    /* Cell Bookmark Register */
-#define SPRN_PA6T_RPCCR 1021    /* Retire PC Trace Control Register */
-
-
-#else /* 32-bit */
-#define SPRN_MMCR0      952     /* Monitor Mode Control Register 0 */
-#define   MMCR0_FC      0x80000000UL /* freeze counters */
-#define   MMCR0_FCS     0x40000000UL /* freeze in supervisor state */
-#define   MMCR0_FCP     0x20000000UL /* freeze in problem state */
-#define   MMCR0_FCM1    0x10000000UL /* freeze counters while MSR mark = 1 */
-#define   MMCR0_FCM0    0x08000000UL /* freeze counters while MSR mark = 0 */
-#define   MMCR0_PMXE    0x04000000UL /* performance monitor exception enable */
-#define   MMCR0_FCECE   0x02000000UL /* freeze ctrs on enabled cond or event */
-#define   MMCR0_TBEE    0x00400000UL /* time base exception enable */
-#define   MMCR0_PMC1CE  0x00008000UL /* PMC1 count enable*/
-#define   MMCR0_PMCnCE  0x00004000UL /* count enable for all but PMC 1*/
-#define   MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
-#define   MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */
-#define   MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */
-
-#define SPRN_MMCR1      956
-#define   MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */
-#define   MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */
-#define   MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */
-#define   MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
-#define SPRN_MMCR2      944
-#define SPRN_PMC1       953     /* Performance Counter Register 1 */
-#define SPRN_PMC2       954     /* Performance Counter Register 2 */
-#define SPRN_PMC3       957     /* Performance Counter Register 3 */
-#define SPRN_PMC4       958     /* Performance Counter Register 4 */
-#define SPRN_PMC5       945     /* Performance Counter Register 5 */
-#define SPRN_PMC6       946     /* Performance Counter Register 6 */
-
-#define SPRN_SIAR       955     /* Sampled Instruction Address Register */
-
-/* Bit definitions for MMCR0 and PMC1 / PMC2. */
-#define MMCR0_PMC1_CYCLES       (1 << 7)
-#define MMCR0_PMC1_ICACHEMISS   (5 << 7)
-#define MMCR0_PMC1_DTLB         (6 << 7)
-#define MMCR0_PMC2_DCACHEMISS   0x6
-#define MMCR0_PMC2_CYCLES       0x1
-#define MMCR0_PMC2_ITLB         0x7
-#define MMCR0_PMC2_LOADMISSTIME 0x5
-#endif
-
-/*
- * An mtfsf instruction with the L bit set. On CPUs that support this a
- * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
- *
- * Until binutils gets the new form of mtfsf, hardwire the instruction.
- */
-#ifdef CONFIG_PPC64
-#define MTFSF_L(REG) \
-        .long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25))
-#else
-#define MTFSF_L(REG)    mtfsf   0xff, (REG)
-#endif
-
-/* Processor Version Register (PVR) field extraction */
-
-#define PVR_VER(pvr)    (((pvr) >>  16) & 0xFFFF)       /* Version field */
-#define PVR_REV(pvr)    (((pvr) >>   0) & 0xFFFF)       /* Revison field */
-
-#define __is_processor(pv)      (PVR_VER(mfspr(SPRN_PVR)) == (pv))
-
-/*
- * IBM has further subdivided the standard PowerPC 16-bit version and
- * revision subfields of the PVR for the PowerPC 403s into the following:
- */
-
-#define PVR_FAM(pvr)    (((pvr) >> 20) & 0xFFF) /* Family field */
-#define PVR_MEM(pvr)    (((pvr) >> 16) & 0xF)   /* Member field */
-#define PVR_CORE(pvr)   (((pvr) >> 12) & 0xF)   /* Core field */
-#define PVR_CFG(pvr)    (((pvr) >>  8) & 0xF)   /* Configuration field */
-#define PVR_MAJ(pvr)    (((pvr) >>  4) & 0xF)   /* Major revision field */
-#define PVR_MIN(pvr)    (((pvr) >>  0) & 0xF)   /* Minor revision field */
-
-/* Processor Version Numbers */
-
-#define PVR_403GA       0x00200000
-#define PVR_403GB       0x00200100
-#define PVR_403GC       0x00200200
-#define PVR_403GCX      0x00201400
-#define PVR_405GP       0x40110000
-#define PVR_STB03XXX    0x40310000
-#define PVR_NP405H      0x41410000
-#define PVR_NP405L      0x41610000
-#define PVR_601         0x00010000
-#define PVR_602         0x00050000
-#define PVR_603         0x00030000
-#define PVR_603e        0x00060000
-#define PVR_603ev       0x00070000
-#define PVR_603r        0x00071000
-#define PVR_604         0x00040000
-#define PVR_604e        0x00090000
-#define PVR_604r        0x000A0000
-#define PVR_620         0x00140000
-#define PVR_740         0x00080000
-#define PVR_750         PVR_740
-#define PVR_740P        0x10080000
-#define PVR_750P        PVR_740P
-#define PVR_7400        0x000C0000
-#define PVR_7410        0x800C0000
-#define PVR_7450        0x80000000
-#define PVR_8540        0x80200000
-#define PVR_8560        0x80200000
-/*
- * For the 8xx processors, all of them report the same PVR family for
- * the PowerPC core. The various versions of these processors must be
- * differentiated by the version number in the Communication Processor
- * Module (CPM).
- */
-#define PVR_821         0x00500000
-#define PVR_823         PVR_821
-#define PVR_850         PVR_821
-#define PVR_860         PVR_821
-#define PVR_8240        0x00810100
-#define PVR_8245        0x80811014
-#define PVR_8260        PVR_8240
-
-/* 64-bit processors */
-/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
-#define PV_NORTHSTAR    0x0033
-#define PV_PULSAR       0x0034
-#define PV_POWER4       0x0035
-#define PV_ICESTAR      0x0036
-#define PV_SSTAR        0x0037
-#define PV_POWER4p      0x0038
-#define PV_970          0x0039
-#define PV_POWER5       0x003A
-#define PV_POWER5p      0x003B
-#define PV_970FX        0x003C
-#define PV_630          0x0040
-#define PV_630p 0x0041
-#define PV_970MP        0x0044
-#define PV_970GX        0x0045
-#define PV_BE           0x0070
-#define PV_PA6T         0x0090
-
-/* Macros for setting and retrieving special purpose registers */
-#ifndef __ASSEMBLY__
-#define mfmsr()         ({unsigned long rval; \
-                        asm volatile("mfmsr %0" : "=r" (rval)); rval;})
-#ifdef CONFIG_PPC64
-#define __mtmsrd(v, l)  asm volatile("mtmsrd %0," __stringify(l) \
-                                     : : "r" (v))
-#define mtmsrd(v)       __mtmsrd((v), 0)
-#define mtmsr(v)        mtmsrd(v)
-#else
-#define mtmsr(v)        asm volatile("mtmsr %0" : : "r" (v))
-#endif
-
-#define mfspr(rn)       ({unsigned long rval; \
-                        asm volatile("mfspr %0," __stringify(rn) \
-                                : "=r" (rval)); rval;})
-#define mtspr(rn, v)    asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
-
-#ifdef __powerpc64__
-#ifdef CONFIG_PPC_CELL
-#define mftb()          ({unsigned long rval;                           \
-                        asm volatile(                                   \
-                                "90:    mftb %0;\n"                     \
-                                "97:    cmpwi %0,0;\n"                  \
-                                "       beq- 90b;\n"                    \
-                                "99:\n"                                 \
-                                ".section __ftr_fixup,\"a\"\n"          \
-                                ".align 3\n"                            \
-                                "98:\n"                                 \
-                                "       .llong %1\n"                    \
-                                "       .llong %1\n"                    \
-                                "       .llong 97b-98b\n"               \
-                                "       .llong 99b-98b\n"               \
-                                "       .llong 0\n"                     \
-                                "       .llong 0\n"                     \
-                                ".previous"                             \
-                        : "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
-#else
-#define mftb()          ({unsigned long rval;   \
-                        asm volatile("mftb %0" : "=r" (rval)); rval;})
-#endif /* !CONFIG_PPC_CELL */
-
-#else /* __powerpc64__ */
-
-#define mftbl()         ({unsigned long rval;   \
-                        asm volatile("mftbl %0" : "=r" (rval)); rval;})
-#define mftbu()         ({unsigned long rval;   \
-                        asm volatile("mftbu %0" : "=r" (rval)); rval;})
-#endif /* !__powerpc64__ */
-
-#define mttbl(v)        asm volatile("mttbl %0":: "r"(v))
-#define mttbu(v)        asm volatile("mttbu %0":: "r"(v))
-
-#ifdef CONFIG_PPC32
-#define mfsrin(v)       ({unsigned int rval; \
-                        asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
-                                        rval;})
-#endif
-
-#define proc_trap()     asm volatile("trap")
-
-#ifdef CONFIG_PPC64
-
-extern void ppc64_runlatch_on(void);
-extern void ppc64_runlatch_off(void);
-
-extern unsigned long scom970_read(unsigned int address);
-extern void scom970_write(unsigned int address, unsigned long value);
-
-#else
-#define ppc64_runlatch_on()
-#define ppc64_runlatch_off()
-
-#endif /* CONFIG_PPC64 */
-
-#define __get_SP()      ({unsigned long sp; \
-                        asm volatile("mr %0,1": "=r" (sp)); sp;})
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_REG_H */
diff --git a/include/asm-powerpc/reg_8xx.h b/include/asm-powerpc/reg_8xx.h
deleted file mode 100644
index e8ea346b21d3..000000000000
--- a/include/asm-powerpc/reg_8xx.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Contains register definitions common to PowerPC 8xx CPUs.  Notice
- */
-#ifndef _ASM_POWERPC_REG_8xx_H
-#define _ASM_POWERPC_REG_8xx_H
-
-/* Cache control on the MPC8xx is provided through some additional
- * special purpose registers.
- */
-#define SPRN_IC_CST     560     /* Instruction cache control/status */
-#define SPRN_IC_ADR     561     /* Address needed for some commands */
-#define SPRN_IC_DAT     562     /* Read-only data register */
-#define SPRN_DC_CST     568     /* Data cache control/status */
-#define SPRN_DC_ADR     569     /* Address needed for some commands */
-#define SPRN_DC_DAT     570     /* Read-only data register */
-
-/* Commands.  Only the first few are available to the instruction cache.
-*/
-#define IDC_ENABLE      0x02000000      /* Cache enable */
-#define IDC_DISABLE     0x04000000      /* Cache disable */
-#define IDC_LDLCK       0x06000000      /* Load and lock */
-#define IDC_UNLINE      0x08000000      /* Unlock line */
-#define IDC_UNALL       0x0a000000      /* Unlock all */
-#define IDC_INVALL      0x0c000000      /* Invalidate all */
-
-#define DC_FLINE        0x0e000000      /* Flush data cache line */
-#define DC_SFWT         0x01000000      /* Set forced writethrough mode */
-#define DC_CFWT         0x03000000      /* Clear forced writethrough mode */
-#define DC_SLES         0x05000000      /* Set little endian swap mode */
-#define DC_CLES         0x07000000      /* Clear little endian swap mode */
-
-/* Status.
-*/
-#define IDC_ENABLED     0x80000000      /* Cache is enabled */
-#define IDC_CERR1       0x00200000      /* Cache error 1 */
-#define IDC_CERR2       0x00100000      /* Cache error 2 */
-#define IDC_CERR3       0x00080000      /* Cache error 3 */
-
-#define DC_DFWT         0x40000000      /* Data cache is forced write through */
-#define DC_LES          0x20000000      /* Caches are little endian mode */
-
-#endif /* _ASM_POWERPC_REG_8xx_H */
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
deleted file mode 100644
index be980f4ee495..000000000000
--- a/include/asm-powerpc/reg_booke.h
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * Contains register definitions common to the Book E PowerPC
- * specification.  Notice that while the IBM-40x series of CPUs
- * are not true Book E PowerPCs, they borrowed a number of features
- * before Book E was finalized, and are included here as well.  Unfortunatly,
- * they sometimes used different locations than true Book E CPUs did.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_REG_BOOKE_H__
-#define __ASM_POWERPC_REG_BOOKE_H__
-
-/* Machine State Register (MSR) Fields */
-#define MSR_UCLE        (1<<26) /* User-mode cache lock enable */
-#define MSR_SPE         (1<<25) /* Enable SPE */
-#define MSR_DWE         (1<<10) /* Debug Wait Enable */
-#define MSR_UBLE        (1<<10) /* BTB lock enable (e500) */
-#define MSR_IS          MSR_IR  /* Instruction Space */
-#define MSR_DS          MSR_DR  /* Data Space */
-#define MSR_PMM         (1<<2)  /* Performance monitor mark bit */
-
-/* Default MSR for kernel mode. */
-#if defined (CONFIG_40x)
-#define MSR_KERNEL      (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
-#elif defined(CONFIG_BOOKE)
-#define MSR_KERNEL      (MSR_ME|MSR_RI|MSR_CE)
-#endif
-
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_DECAR      0x036   /* Decrementer Auto Reload Register */
-#define SPRN_IVPR       0x03F   /* Interrupt Vector Prefix Register */
-#define SPRN_USPRG0     0x100   /* User Special Purpose Register General 0 */
-#define SPRN_SPRG4R     0x104   /* Special Purpose Register General 4 Read */
-#define SPRN_SPRG5R     0x105   /* Special Purpose Register General 5 Read */
-#define SPRN_SPRG6R     0x106   /* Special Purpose Register General 6 Read */
-#define SPRN_SPRG7R     0x107   /* Special Purpose Register General 7 Read */
-#define SPRN_SPRG4W     0x114   /* Special Purpose Register General 4 Write */
-#define SPRN_SPRG5W     0x115   /* Special Purpose Register General 5 Write */
-#define SPRN_SPRG6W     0x116   /* Special Purpose Register General 6 Write */
-#define SPRN_SPRG7W     0x117   /* Special Purpose Register General 7 Write */
-#define SPRN_DBCR2      0x136   /* Debug Control Register 2 */
-#define SPRN_IAC3       0x13A   /* Instruction Address Compare 3 */
-#define SPRN_IAC4       0x13B   /* Instruction Address Compare 4 */
-#define SPRN_DVC1       0x13E   /* Data Value Compare Register 1 */
-#define SPRN_DVC2       0x13F   /* Data Value Compare Register 2 */
-#define SPRN_IVOR0      0x190   /* Interrupt Vector Offset Register 0 */
-#define SPRN_IVOR1      0x191   /* Interrupt Vector Offset Register 1 */
-#define SPRN_IVOR2      0x192   /* Interrupt Vector Offset Register 2 */
-#define SPRN_IVOR3      0x193   /* Interrupt Vector Offset Register 3 */
-#define SPRN_IVOR4      0x194   /* Interrupt Vector Offset Register 4 */
-#define SPRN_IVOR5      0x195   /* Interrupt Vector Offset Register 5 */
-#define SPRN_IVOR6      0x196   /* Interrupt Vector Offset Register 6 */
-#define SPRN_IVOR7      0x197   /* Interrupt Vector Offset Register 7 */
-#define SPRN_IVOR8      0x198   /* Interrupt Vector Offset Register 8 */
-#define SPRN_IVOR9      0x199   /* Interrupt Vector Offset Register 9 */
-#define SPRN_IVOR10     0x19A   /* Interrupt Vector Offset Register 10 */
-#define SPRN_IVOR11     0x19B   /* Interrupt Vector Offset Register 11 */
-#define SPRN_IVOR12     0x19C   /* Interrupt Vector Offset Register 12 */
-#define SPRN_IVOR13     0x19D   /* Interrupt Vector Offset Register 13 */
-#define SPRN_IVOR14     0x19E   /* Interrupt Vector Offset Register 14 */
-#define SPRN_IVOR15     0x19F   /* Interrupt Vector Offset Register 15 */
-#define SPRN_SPEFSCR    0x200   /* SPE & Embedded FP Status & Control */
-#define SPRN_BBEAR      0x201   /* Branch Buffer Entry Address Register */
-#define SPRN_BBTAR      0x202   /* Branch Buffer Target Address Register */
-#define SPRN_L1CFG0     0x203   /* L1 Cache Configure Register 0 */
-#define SPRN_L1CFG1     0x204   /* L1 Cache Configure Register 1 */
-#define SPRN_ATB        0x20E   /* Alternate Time Base */
-#define SPRN_ATBL       0x20E   /* Alternate Time Base Lower */
-#define SPRN_ATBU       0x20F   /* Alternate Time Base Upper */
-#define SPRN_IVOR32     0x210   /* Interrupt Vector Offset Register 32 */
-#define SPRN_IVOR33     0x211   /* Interrupt Vector Offset Register 33 */
-#define SPRN_IVOR34     0x212   /* Interrupt Vector Offset Register 34 */
-#define SPRN_IVOR35     0x213   /* Interrupt Vector Offset Register 35 */
-#define SPRN_IVOR36     0x214   /* Interrupt Vector Offset Register 36 */
-#define SPRN_IVOR37     0x215   /* Interrupt Vector Offset Register 37 */
-#define SPRN_MCSRR0     0x23A   /* Machine Check Save and Restore Register 0 */
-#define SPRN_MCSRR1     0x23B   /* Machine Check Save and Restore Register 1 */
-#define SPRN_MCSR       0x23C   /* Machine Check Status Register */
-#define SPRN_MCAR       0x23D   /* Machine Check Address Register */
-#define SPRN_DSRR0      0x23E   /* Debug Save and Restore Register 0 */
-#define SPRN_DSRR1      0x23F   /* Debug Save and Restore Register 1 */
-#define SPRN_SPRG8      0x25C   /* Special Purpose Register General 8 */
-#define SPRN_SPRG9      0x25D   /* Special Purpose Register General 9 */
-#define SPRN_L1CSR2     0x25E   /* L1 Cache Control and Status Register 2 */
-#define SPRN_MAS0       0x270   /* MMU Assist Register 0 */
-#define SPRN_MAS1       0x271   /* MMU Assist Register 1 */
-#define SPRN_MAS2       0x272   /* MMU Assist Register 2 */
-#define SPRN_MAS3       0x273   /* MMU Assist Register 3 */
-#define SPRN_MAS4       0x274   /* MMU Assist Register 4 */
-#define SPRN_MAS5       0x275   /* MMU Assist Register 5 */
-#define SPRN_MAS6       0x276   /* MMU Assist Register 6 */
-#define SPRN_PID1       0x279   /* Process ID Register 1 */
-#define SPRN_PID2       0x27A   /* Process ID Register 2 */
-#define SPRN_TLB0CFG    0x2B0   /* TLB 0 Config Register */
-#define SPRN_TLB1CFG    0x2B1   /* TLB 1 Config Register */
-#define SPRN_EPR        0x2BE   /* External Proxy Register */
-#define SPRN_CCR1       0x378   /* Core Configuration Register 1 */
-#define SPRN_ZPR        0x3B0   /* Zone Protection Register (40x) */
-#define SPRN_MAS7       0x3B0   /* MMU Assist Register 7 */
-#define SPRN_MMUCR      0x3B2   /* MMU Control Register */
-#define SPRN_CCR0       0x3B3   /* Core Configuration Register 0 */
-#define SPRN_EPLC       0x3B3   /* External Process ID Load Context */
-#define SPRN_EPSC       0x3B4   /* External Process ID Store Context */
-#define SPRN_SGR        0x3B9   /* Storage Guarded Register */
-#define SPRN_DCWR       0x3BA   /* Data Cache Write-thru Register */
-#define SPRN_SLER       0x3BB   /* Little-endian real mode */
-#define SPRN_SU0R       0x3BC   /* "User 0" real mode (40x) */
-#define SPRN_DCMP       0x3D1   /* Data TLB Compare Register */
-#define SPRN_ICDBDR     0x3D3   /* Instruction Cache Debug Data Register */
-#define SPRN_EVPR       0x3D6   /* Exception Vector Prefix Register */
-#define SPRN_L1CSR0     0x3F2   /* L1 Cache Control and Status Register 0 */
-#define SPRN_L1CSR1     0x3F3   /* L1 Cache Control and Status Register 1 */
-#define SPRN_PIT        0x3DB   /* Programmable Interval Timer */
-#define SPRN_BUCSR      0x3F5   /* Branch Unit Control and Status */
-#define SPRN_L2CSR0     0x3F9   /* L2 Data Cache Control and Status Register 0 */
-#define SPRN_L2CSR1     0x3FA   /* L2 Data Cache Control and Status Register 1 */
-#define SPRN_DCCR       0x3FA   /* Data Cache Cacheability Register */
-#define SPRN_ICCR       0x3FB   /* Instruction Cache Cacheability Register */
-#define SPRN_SVR        0x3FF   /* System Version Register */
-
-/*
- * SPRs which have conflicting definitions on true Book E versus classic,
- * or IBM 40x.
- */
-#ifdef CONFIG_BOOKE
-#define SPRN_PID        0x030   /* Process ID */
-#define SPRN_PID0       SPRN_PID/* Process ID Register 0 */
-#define SPRN_CSRR0      0x03A   /* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1      0x03B   /* Critical Save and Restore Register 1 */
-#define SPRN_DEAR       0x03D   /* Data Error Address Register */
-#define SPRN_ESR        0x03E   /* Exception Syndrome Register */
-#define SPRN_PIR        0x11E   /* Processor Identification Register */
-#define SPRN_DBSR       0x130   /* Debug Status Register */
-#define SPRN_DBCR0      0x134   /* Debug Control Register 0 */
-#define SPRN_DBCR1      0x135   /* Debug Control Register 1 */
-#define SPRN_IAC1       0x138   /* Instruction Address Compare 1 */
-#define SPRN_IAC2       0x139   /* Instruction Address Compare 2 */
-#define SPRN_DAC1       0x13C   /* Data Address Compare 1 */
-#define SPRN_DAC2       0x13D   /* Data Address Compare 2 */
-#define SPRN_TSR        0x150   /* Timer Status Register */
-#define SPRN_TCR        0x154   /* Timer Control Register */
-#endif /* Book E */
-#ifdef CONFIG_40x
-#define SPRN_PID        0x3B1   /* Process ID */
-#define SPRN_DBCR1      0x3BD   /* Debug Control Register 1 */          
-#define SPRN_ESR        0x3D4   /* Exception Syndrome Register */
-#define SPRN_DEAR       0x3D5   /* Data Error Address Register */
-#define SPRN_TSR        0x3D8   /* Timer Status Register */
-#define SPRN_TCR        0x3DA   /* Timer Control Register */
-#define SPRN_SRR2       0x3DE   /* Save/Restore Register 2 */
-#define SPRN_SRR3       0x3DF   /* Save/Restore Register 3 */
-#define SPRN_DBSR       0x3F0   /* Debug Status Register */             
-#define SPRN_DBCR0      0x3F2   /* Debug Control Register 0 */
-#define SPRN_DAC1       0x3F6   /* Data Address Compare 1 */
-#define SPRN_DAC2       0x3F7   /* Data Address Compare 2 */
-#define SPRN_CSRR0      SPRN_SRR2 /* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1      SPRN_SRR3 /* Critical Save and Restore Register 1 */
-#endif
-
-/* Bit definitions for CCR1. */
-#define CCR1_DPC        0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
-#define CCR1_TCS        0x00000080 /* Timer Clock Select */
-
-/* Bit definitions for the MCSR. */
-#define MCSR_MCS        0x80000000 /* Machine Check Summary */
-#define MCSR_IB         0x40000000 /* Instruction PLB Error */
-#define MCSR_DRB        0x20000000 /* Data Read PLB Error */
-#define MCSR_DWB        0x10000000 /* Data Write PLB Error */
-#define MCSR_TLBP       0x08000000 /* TLB Parity Error */
-#define MCSR_ICP        0x04000000 /* I-Cache Parity Error */
-#define MCSR_DCSP       0x02000000 /* D-Cache Search Parity Error */
-#define MCSR_DCFP       0x01000000 /* D-Cache Flush Parity Error */
-#define MCSR_IMPE       0x00800000 /* Imprecise Machine Check Exception */
-
-#ifdef CONFIG_E500
-#define MCSR_MCP        0x80000000UL /* Machine Check Input Pin */
-#define MCSR_ICPERR     0x40000000UL /* I-Cache Parity Error */
-#define MCSR_DCP_PERR   0x20000000UL /* D-Cache Push Parity Error */
-#define MCSR_DCPERR     0x10000000UL /* D-Cache Parity Error */
-#define MCSR_BUS_IAERR  0x00000080UL /* Instruction Address Error */
-#define MCSR_BUS_RAERR  0x00000040UL /* Read Address Error */
-#define MCSR_BUS_WAERR  0x00000020UL /* Write Address Error */
-#define MCSR_BUS_IBERR  0x00000010UL /* Instruction Data Error */
-#define MCSR_BUS_RBERR  0x00000008UL /* Read Data Bus Error */
-#define MCSR_BUS_WBERR  0x00000004UL /* Write Data Bus Error */
-#define MCSR_BUS_IPERR  0x00000002UL /* Instruction parity Error */
-#define MCSR_BUS_RPERR  0x00000001UL /* Read parity Error */
-
-/* e500 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK       (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
-                        MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
-                        MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
-                        MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
-#endif
-#ifdef CONFIG_E200
-#define MCSR_MCP        0x80000000UL /* Machine Check Input Pin */
-#define MCSR_CP_PERR    0x20000000UL /* Cache Push Parity Error */
-#define MCSR_CPERR      0x10000000UL /* Cache Parity Error */
-#define MCSR_EXCP_ERR   0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn
-                                        fetch for an exception handler */
-#define MCSR_BUS_IRERR  0x00000010UL /* Read Bus Error on instruction fetch*/
-#define MCSR_BUS_DRERR  0x00000008UL /* Read Bus Error on data load */
-#define MCSR_BUS_WRERR  0x00000004UL /* Write Bus Error on buffered
-                                        store or cache line push */
-
-/* e200 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK       (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
-                        MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
-                        MCSR_BUS_WRERR)
-#endif
-
-/* Bit definitions for the DBSR. */
-/*
- * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
- */
-#ifdef CONFIG_BOOKE
-#define DBSR_IC         0x08000000      /* Instruction Completion */
-#define DBSR_BT         0x04000000      /* Branch Taken */
-#define DBSR_IRPT       0x02000000      /* Exception Debug Event */
-#define DBSR_TIE        0x01000000      /* Trap Instruction Event */
-#define DBSR_IAC1       0x00800000      /* Instr Address Compare 1 Event */
-#define DBSR_IAC2       0x00400000      /* Instr Address Compare 2 Event */
-#define DBSR_IAC3       0x00200000      /* Instr Address Compare 3 Event */
-#define DBSR_IAC4       0x00100000      /* Instr Address Compare 4 Event */
-#define DBSR_DAC1R      0x00080000      /* Data Addr Compare 1 Read Event */
-#define DBSR_DAC1W      0x00040000      /* Data Addr Compare 1 Write Event */
-#define DBSR_DAC2R      0x00020000      /* Data Addr Compare 2 Read Event */
-#define DBSR_DAC2W      0x00010000      /* Data Addr Compare 2 Write Event */
-#define DBSR_RET        0x00008000      /* Return Debug Event */
-#define DBSR_CIRPT      0x00000040      /* Critical Interrupt Taken Event */
-#define DBSR_CRET       0x00000020      /* Critical Return Debug Event */
-#endif
-#ifdef CONFIG_40x
-#define DBSR_IC         0x80000000      /* Instruction Completion */
-#define DBSR_BT         0x40000000      /* Branch taken */
-#define DBSR_IRPT       0x20000000      /* Exception Debug Event */
-#define DBSR_TIE        0x10000000      /* Trap Instruction debug Event */
-#define DBSR_IAC1       0x04000000      /* Instruction Address Compare 1 Event */
-#define DBSR_IAC2       0x02000000      /* Instruction Address Compare 2 Event */
-#define DBSR_IAC3       0x00080000      /* Instruction Address Compare 3 Event */
-#define DBSR_IAC4       0x00040000      /* Instruction Address Compare 4 Event */
-#define DBSR_DAC1R      0x01000000      /* Data Address Compare 1 Read Event */
-#define DBSR_DAC1W      0x00800000      /* Data Address Compare 1 Write Event */
-#define DBSR_DAC2R      0x00400000      /* Data Address Compare 2 Read Event */
-#define DBSR_DAC2W      0x00200000      /* Data Address Compare 2 Write Event */
-#endif
-
-/* Bit definitions related to the ESR. */
-#define ESR_MCI         0x80000000      /* Machine Check - Instruction */
-#define ESR_IMCP        0x80000000      /* Instr. Machine Check - Protection */
-#define ESR_IMCN        0x40000000      /* Instr. Machine Check - Non-config */
-#define ESR_IMCB        0x20000000      /* Instr. Machine Check - Bus error */
-#define ESR_IMCT        0x10000000      /* Instr. Machine Check - Timeout */
-#define ESR_PIL         0x08000000      /* Program Exception - Illegal */
-#define ESR_PPR         0x04000000      /* Program Exception - Privileged */
-#define ESR_PTR         0x02000000      /* Program Exception - Trap */
-#define ESR_FP          0x01000000      /* Floating Point Operation */
-#define ESR_DST         0x00800000      /* Storage Exception - Data miss */
-#define ESR_DIZ         0x00400000      /* Storage Exception - Zone fault */
-#define ESR_ST          0x00800000      /* Store Operation */
-#define ESR_DLK         0x00200000      /* Data Cache Locking */
-#define ESR_ILK         0x00100000      /* Instr. Cache Locking */
-#define ESR_PUO         0x00040000      /* Unimplemented Operation exception */
-#define ESR_BO          0x00020000      /* Byte Ordering */
-
-/* Bit definitions related to the DBCR0. */
-#if defined(CONFIG_40x)
-#define DBCR0_EDM       0x80000000      /* External Debug Mode */
-#define DBCR0_IDM       0x40000000      /* Internal Debug Mode */
-#define DBCR0_RST       0x30000000      /* all the bits in the RST field */
-#define DBCR0_RST_SYSTEM 0x30000000     /* System Reset */
-#define DBCR0_RST_CHIP  0x20000000      /* Chip Reset */
-#define DBCR0_RST_CORE  0x10000000      /* Core Reset */
-#define DBCR0_RST_NONE  0x00000000      /* No Reset */
-#define DBCR0_IC        0x08000000      /* Instruction Completion */
-#define DBCR0_ICMP      DBCR0_IC
-#define DBCR0_BT        0x04000000      /* Branch Taken */
-#define DBCR0_BRT       DBCR0_BT
-#define DBCR0_EDE       0x02000000      /* Exception Debug Event */
-#define DBCR0_IRPT      DBCR0_EDE
-#define DBCR0_TDE       0x01000000      /* TRAP Debug Event */
-#define DBCR0_IA1       0x00800000      /* Instr Addr compare 1 enable */
-#define DBCR0_IAC1      DBCR0_IA1
-#define DBCR0_IA2       0x00400000      /* Instr Addr compare 2 enable */
-#define DBCR0_IAC2      DBCR0_IA2
-#define DBCR0_IA12      0x00200000      /* Instr Addr 1-2 range enable */
-#define DBCR0_IA12X     0x00100000      /* Instr Addr 1-2 range eXclusive */
-#define DBCR0_IA3       0x00080000      /* Instr Addr compare 3 enable */
-#define DBCR0_IAC3      DBCR0_IA3
-#define DBCR0_IA4       0x00040000      /* Instr Addr compare 4 enable */
-#define DBCR0_IAC4      DBCR0_IA4
-#define DBCR0_IA34      0x00020000      /* Instr Addr 3-4 range Enable */
-#define DBCR0_IA34X     0x00010000      /* Instr Addr 3-4 range eXclusive */
-#define DBCR0_IA12T     0x00008000      /* Instr Addr 1-2 range Toggle */
-#define DBCR0_IA34T     0x00004000      /* Instr Addr 3-4 range Toggle */
-#define DBCR0_FT        0x00000001      /* Freeze Timers on debug event */
-#elif defined(CONFIG_BOOKE)
-#define DBCR0_EDM       0x80000000      /* External Debug Mode */
-#define DBCR0_IDM       0x40000000      /* Internal Debug Mode */
-#define DBCR0_RST       0x30000000      /* all the bits in the RST field */
-/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
-#define DBCR0_RST_SYSTEM 0x30000000     /* System Reset */
-#define DBCR0_RST_CHIP  0x20000000      /* Chip Reset */
-#define DBCR0_RST_CORE  0x10000000      /* Core Reset */
-#define DBCR0_RST_NONE  0x00000000      /* No Reset */
-#define DBCR0_ICMP      0x08000000      /* Instruction Completion */
-#define DBCR0_IC        DBCR0_ICMP
-#define DBCR0_BRT       0x04000000      /* Branch Taken */
-#define DBCR0_BT        DBCR0_BRT
-#define DBCR0_IRPT      0x02000000      /* Exception Debug Event */
-#define DBCR0_TDE       0x01000000      /* TRAP Debug Event */
-#define DBCR0_TIE       DBCR0_TDE
-#define DBCR0_IAC1      0x00800000      /* Instr Addr compare 1 enable */
-#define DBCR0_IAC2      0x00400000      /* Instr Addr compare 2 enable */
-#define DBCR0_IAC3      0x00200000      /* Instr Addr compare 3 enable */
-#define DBCR0_IAC4      0x00100000      /* Instr Addr compare 4 enable */
-#define DBCR0_DAC1R     0x00080000      /* DAC 1 Read enable */
-#define DBCR0_DAC1W     0x00040000      /* DAC 1 Write enable */
-#define DBCR0_DAC2R     0x00020000      /* DAC 2 Read enable */
-#define DBCR0_DAC2W     0x00010000      /* DAC 2 Write enable */
-#define DBCR0_RET       0x00008000      /* Return Debug Event */
-#define DBCR0_CIRPT     0x00000040      /* Critical Interrupt Taken Event */
-#define DBCR0_CRET      0x00000020      /* Critical Return Debug Event */
-#define DBCR0_FT        0x00000001      /* Freeze Timers on debug event */
-
-/* Bit definitions related to the DBCR1. */
-#define DBCR1_IAC12M    0x00800000      /* Instr Addr 1-2 range enable */
-#define DBCR1_IAC12MX   0x00C00000      /* Instr Addr 1-2 range eXclusive */
-#define DBCR1_IAC12AT   0x00010000      /* Instr Addr 1-2 range Toggle */
-#define DBCR1_IAC34M    0x00000080      /* Instr Addr 3-4 range enable */
-#define DBCR1_IAC34MX   0x000000C0      /* Instr Addr 3-4 range eXclusive */
-#define DBCR1_IAC34AT   0x00000001      /* Instr Addr 3-4 range Toggle */
-
-/* Bit definitions related to the DBCR2. */
-#define DBCR2_DAC12M    0x00800000      /* DAC 1-2 range enable */
-#define DBCR2_DAC12MX   0x00C00000      /* DAC 1-2 range eXclusive */
-#define DBCR2_DAC12A    0x00200000      /* DAC 1-2 Asynchronous */
-#endif
-
-/* Bit definitions related to the TCR. */
-#define TCR_WP(x)       (((x)&0x3)<<30) /* WDT Period */
-#define TCR_WP_MASK     TCR_WP(3)
-#define WP_2_17         0               /* 2^17 clocks */
-#define WP_2_21         1               /* 2^21 clocks */
-#define WP_2_25         2               /* 2^25 clocks */
-#define WP_2_29         3               /* 2^29 clocks */
-#define TCR_WRC(x)      (((x)&0x3)<<28) /* WDT Reset Control */
-#define TCR_WRC_MASK    TCR_WRC(3)
-#define WRC_NONE        0               /* No reset will occur */
-#define WRC_CORE        1               /* Core reset will occur */
-#define WRC_CHIP        2               /* Chip reset will occur */
-#define WRC_SYSTEM      3               /* System reset will occur */
-#define TCR_WIE         0x08000000      /* WDT Interrupt Enable */
-#define TCR_PIE         0x04000000      /* PIT Interrupt Enable */
-#define TCR_DIE         TCR_PIE         /* DEC Interrupt Enable */
-#define TCR_FP(x)       (((x)&0x3)<<24) /* FIT Period */
-#define TCR_FP_MASK     TCR_FP(3)
-#define FP_2_9          0               /* 2^9 clocks */
-#define FP_2_13         1               /* 2^13 clocks */
-#define FP_2_17         2               /* 2^17 clocks */
-#define FP_2_21         3               /* 2^21 clocks */
-#define TCR_FIE         0x00800000      /* FIT Interrupt Enable */
-#define TCR_ARE         0x00400000      /* Auto Reload Enable */
-
-/* Bit definitions for the TSR. */
-#define TSR_ENW         0x80000000      /* Enable Next Watchdog */
-#define TSR_WIS         0x40000000      /* WDT Interrupt Status */
-#define TSR_WRS(x)      (((x)&0x3)<<28) /* WDT Reset Status */
-#define WRS_NONE        0               /* No WDT reset occurred */
-#define WRS_CORE        1               /* WDT forced core reset */
-#define WRS_CHIP        2               /* WDT forced chip reset */
-#define WRS_SYSTEM      3               /* WDT forced system reset */
-#define TSR_PIS         0x08000000      /* PIT Interrupt Status */
-#define TSR_DIS         TSR_PIS         /* DEC Interrupt Status */
-#define TSR_FIS         0x04000000      /* FIT Interrupt Status */
-
-/* Bit definitions for the DCCR. */
-#define DCCR_NOCACHE    0               /* Noncacheable */
-#define DCCR_CACHE      1               /* Cacheable */
-
-/* Bit definitions for DCWR. */
-#define DCWR_COPY       0               /* Copy-back */
-#define DCWR_WRITE      1               /* Write-through */
-
-/* Bit definitions for ICCR. */
-#define ICCR_NOCACHE    0               /* Noncacheable */
-#define ICCR_CACHE      1               /* Cacheable */
-
-/* Bit definitions for L1CSR0. */
-#define L1CSR0_CLFC     0x00000100      /* Cache Lock Bits Flash Clear */
-#define L1CSR0_DCFI     0x00000002      /* Data Cache Flash Invalidate */
-#define L1CSR0_CFI      0x00000002      /* Cache Flash Invalidate */
-#define L1CSR0_DCE      0x00000001      /* Data Cache Enable */
-
-/* Bit definitions for L1CSR1. */
-#define L1CSR1_ICLFR    0x00000100      /* Instr Cache Lock Bits Flash Reset */
-#define L1CSR1_ICFI     0x00000002      /* Instr Cache Flash Invalidate */
-#define L1CSR1_ICE      0x00000001      /* Instr Cache Enable */
-
-/* Bit definitions for L2CSR0. */
-#define L2CSR0_L2E      0x80000000      /* L2 Cache Enable */
-#define L2CSR0_L2PE     0x40000000      /* L2 Cache Parity/ECC Enable */
-#define L2CSR0_L2WP     0x1c000000      /* L2 I/D Way Partioning */
-#define L2CSR0_L2CM     0x03000000      /* L2 Cache Coherency Mode */
-#define L2CSR0_L2FI     0x00200000      /* L2 Cache Flash Invalidate */
-#define L2CSR0_L2IO     0x00100000      /* L2 Cache Instruction Only */
-#define L2CSR0_L2DO     0x00010000      /* L2 Cache Data Only */
-#define L2CSR0_L2REP    0x00003000      /* L2 Line Replacement Algo */
-#define L2CSR0_L2FL     0x00000800      /* L2 Cache Flush */
-#define L2CSR0_L2LFC    0x00000400      /* L2 Cache Lock Flash Clear */
-#define L2CSR0_L2LOA    0x00000080      /* L2 Cache Lock Overflow Allocate */
-#define L2CSR0_L2LO     0x00000020      /* L2 Cache Lock Overflow */
-
-/* Bit definitions for SGR. */
-#define SGR_NORMAL      0               /* Speculative fetching allowed. */
-#define SGR_GUARDED     1               /* Speculative fetching disallowed. */
-
-/* Bit definitions for SPEFSCR. */
-#define SPEFSCR_SOVH    0x80000000      /* Summary integer overflow high */
-#define SPEFSCR_OVH     0x40000000      /* Integer overflow high */
-#define SPEFSCR_FGH     0x20000000      /* Embedded FP guard bit high */
-#define SPEFSCR_FXH     0x10000000      /* Embedded FP sticky bit high */
-#define SPEFSCR_FINVH   0x08000000      /* Embedded FP invalid operation high */
-#define SPEFSCR_FDBZH   0x04000000      /* Embedded FP div by zero high */
-#define SPEFSCR_FUNFH   0x02000000      /* Embedded FP underflow high */
-#define SPEFSCR_FOVFH   0x01000000      /* Embedded FP overflow high */
-#define SPEFSCR_FINXS   0x00200000      /* Embedded FP inexact sticky */
-#define SPEFSCR_FINVS   0x00100000      /* Embedded FP invalid op. sticky */
-#define SPEFSCR_FDBZS   0x00080000      /* Embedded FP div by zero sticky */
-#define SPEFSCR_FUNFS   0x00040000      /* Embedded FP underflow sticky */
-#define SPEFSCR_FOVFS   0x00020000      /* Embedded FP overflow sticky */
-#define SPEFSCR_MODE    0x00010000      /* Embedded FP mode */
-#define SPEFSCR_SOV     0x00008000      /* Integer summary overflow */
-#define SPEFSCR_OV      0x00004000      /* Integer overflow */
-#define SPEFSCR_FG      0x00002000      /* Embedded FP guard bit */
-#define SPEFSCR_FX      0x00001000      /* Embedded FP sticky bit */
-#define SPEFSCR_FINV    0x00000800      /* Embedded FP invalid operation */
-#define SPEFSCR_FDBZ    0x00000400      /* Embedded FP div by zero */
-#define SPEFSCR_FUNF    0x00000200      /* Embedded FP underflow */
-#define SPEFSCR_FOVF    0x00000100      /* Embedded FP overflow */
-#define SPEFSCR_FINXE   0x00000040      /* Embedded FP inexact enable */
-#define SPEFSCR_FINVE   0x00000020      /* Embedded FP invalid op. enable */
-#define SPEFSCR_FDBZE   0x00000010      /* Embedded FP div by zero enable */
-#define SPEFSCR_FUNFE   0x00000008      /* Embedded FP underflow enable */
-#define SPEFSCR_FOVFE   0x00000004      /* Embedded FP overflow enable */
-#define SPEFSCR_FRMC    0x00000003      /* Embedded FP rounding mode control */
-
-/*
- * The IBM-403 is an even more odd special case, as it is much
- * older than the IBM-405 series.  We put these down here incase someone
- * wishes to support these machines again.
- */
-#ifdef CONFIG_403GCX
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_TBHU       0x3CC   /* Time Base High User-mode */
-#define SPRN_TBLU       0x3CD   /* Time Base Low User-mode */
-#define SPRN_CDBCR      0x3D7   /* Cache Debug Control Register */
-#define SPRN_TBHI       0x3DC   /* Time Base High */
-#define SPRN_TBLO       0x3DD   /* Time Base Low */
-#define SPRN_DBCR       0x3F2   /* Debug Control Regsiter */
-#define SPRN_PBL1       0x3FC   /* Protection Bound Lower 1 */
-#define SPRN_PBL2       0x3FE   /* Protection Bound Lower 2 */
-#define SPRN_PBU1       0x3FD   /* Protection Bound Upper 1 */
-#define SPRN_PBU2       0x3FF   /* Protection Bound Upper 2 */
-
-
-/* Bit definitions for the DBCR. */
-#define DBCR_EDM        DBCR0_EDM
-#define DBCR_IDM        DBCR0_IDM
-#define DBCR_RST(x)     (((x) & 0x3) << 28)
-#define DBCR_RST_NONE   0
-#define DBCR_RST_CORE   1
-#define DBCR_RST_CHIP   2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC         DBCR0_IC        /* Instruction Completion Debug Evnt */
-#define DBCR_BT         DBCR0_BT        /* Branch Taken Debug Event */
-#define DBCR_EDE        DBCR0_EDE       /* Exception Debug Event */
-#define DBCR_TDE        DBCR0_TDE       /* TRAP Debug Event */
-#define DBCR_FER        0x00F80000      /* First Events Remaining Mask */
-#define DBCR_FT         0x00040000      /* Freeze Timers on Debug Event */
-#define DBCR_IA1        0x00020000      /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2        0x00010000      /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R        0x00008000      /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W        0x00004000      /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x)     (((x) & 0x3) << 12)     /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE        0
-#define DAC_HALF        1
-#define DAC_WORD        2
-#define DAC_QUAD        3
-#define DBCR_D2R        0x00000800      /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W        0x00000400      /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x)     (((x) & 0x3) << 8)      /* Data Addr. Compare 2 Size */
-#define DBCR_SBT        0x00000040      /* Second Branch Taken Debug Event */
-#define DBCR_SED        0x00000020      /* Second Exception Debug Event */
-#define DBCR_STD        0x00000010      /* Second Trap Debug Event */
-#define DBCR_SIA        0x00000008      /* Second IAC Enable */
-#define DBCR_SDA        0x00000004      /* Second DAC Enable */
-#define DBCR_JOI        0x00000002      /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII        0x00000001      /* JTAG Serial Inbound Int. Enable */
-#endif /* 403GCX */
-#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/reg_fsl_emb.h b/include/asm-powerpc/reg_fsl_emb.h
deleted file mode 100644
index 1e180a594589..000000000000
--- a/include/asm-powerpc/reg_fsl_emb.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Contains register definitions for the Freescale Embedded Performance
- * Monitor.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
-#define __ASM_POWERPC_REG_FSL_EMB_H__
-
-#ifndef __ASSEMBLY__
-/* Performance Monitor Registers */
-#define mfpmr(rn)       ({unsigned int rval; \
-                        asm volatile("mfpmr %0," __stringify(rn) \
-                                     : "=r" (rval)); rval;})
-#define mtpmr(rn, v)    asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
-#endif /* __ASSEMBLY__ */
-
-/* Freescale Book E Performance Monitor APU Registers */
-#define PMRN_PMC0       0x010   /* Performance Monitor Counter 0 */
-#define PMRN_PMC1       0x011   /* Performance Monitor Counter 1 */
-#define PMRN_PMC2       0x012   /* Performance Monitor Counter 1 */
-#define PMRN_PMC3       0x013   /* Performance Monitor Counter 1 */
-#define PMRN_PMLCA0     0x090   /* PM Local Control A0 */
-#define PMRN_PMLCA1     0x091   /* PM Local Control A1 */
-#define PMRN_PMLCA2     0x092   /* PM Local Control A2 */
-#define PMRN_PMLCA3     0x093   /* PM Local Control A3 */
-
-#define PMLCA_FC        0x80000000      /* Freeze Counter */
-#define PMLCA_FCS       0x40000000      /* Freeze in Supervisor */
-#define PMLCA_FCU       0x20000000      /* Freeze in User */
-#define PMLCA_FCM1      0x10000000      /* Freeze when PMM==1 */
-#define PMLCA_FCM0      0x08000000      /* Freeze when PMM==0 */
-#define PMLCA_CE        0x04000000      /* Condition Enable */
-
-#define PMLCA_EVENT_MASK 0x007f0000     /* Event field */
-#define PMLCA_EVENT_SHIFT       16
-
-#define PMRN_PMLCB0     0x110   /* PM Local Control B0 */
-#define PMRN_PMLCB1     0x111   /* PM Local Control B1 */
-#define PMRN_PMLCB2     0x112   /* PM Local Control B2 */
-#define PMRN_PMLCB3     0x113   /* PM Local Control B3 */
-
-#define PMLCB_THRESHMUL_MASK    0x0700  /* Threshhold Multiple Field */
-#define PMLCB_THRESHMUL_SHIFT   8
-
-#define PMLCB_THRESHOLD_MASK    0x003f  /* Threshold Field */
-#define PMLCB_THRESHOLD_SHIFT   0
-
-#define PMRN_PMGC0      0x190   /* PM Global Control 0 */
-
-#define PMGC0_FAC       0x80000000      /* Freeze all Counters */
-#define PMGC0_PMIE      0x40000000      /* Interrupt Enable */
-#define PMGC0_FCECE     0x20000000      /* Freeze countes on
-                                           Enabled Condition or
-                                           Event */
-
-#define PMRN_UPMC0      0x000   /* User Performance Monitor Counter 0 */
-#define PMRN_UPMC1      0x001   /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2      0x002   /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3      0x003   /* User Performance Monitor Counter 1 */
-#define PMRN_UPMLCA0    0x080   /* User PM Local Control A0 */
-#define PMRN_UPMLCA1    0x081   /* User PM Local Control A1 */
-#define PMRN_UPMLCA2    0x082   /* User PM Local Control A2 */
-#define PMRN_UPMLCA3    0x083   /* User PM Local Control A3 */
-#define PMRN_UPMLCB0    0x100   /* User PM Local Control B0 */
-#define PMRN_UPMLCB1    0x101   /* User PM Local Control B1 */
-#define PMRN_UPMLCB2    0x102   /* User PM Local Control B2 */
-#define PMRN_UPMLCB3    0x103   /* User PM Local Control B3 */
-#define PMRN_UPMGC0     0x180   /* User PM Global Control 0 */
-
-
-#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/resource.h b/include/asm-powerpc/resource.h
deleted file mode 100644
index 04bc4db8921b..000000000000
--- a/include/asm-powerpc/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/resource.h>
diff --git a/include/asm-powerpc/rheap.h b/include/asm-powerpc/rheap.h
deleted file mode 100644
index 172381769cfc..000000000000
--- a/include/asm-powerpc/rheap.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-ppc/rheap.h
- *
- * Header file for the implementation of a remote heap.
- *
- * Author: Pantelis Antoniou <panto@intracom.gr>
- *
- * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_PPC_RHEAP_H__
-#define __ASM_PPC_RHEAP_H__
-
-#include <linux/list.h>
-
-typedef struct _rh_block {
-        struct list_head list;
-        unsigned long start;
-        int size;
-        const char *owner;
-} rh_block_t;
-
-typedef struct _rh_info {
-        unsigned int alignment;
-        int max_blocks;
-        int empty_slots;
-        rh_block_t *block;
-        struct list_head empty_list;
-        struct list_head free_list;
-        struct list_head taken_list;
-        unsigned int flags;
-} rh_info_t;
-
-#define RHIF_STATIC_INFO        0x1
-#define RHIF_STATIC_BLOCK       0x2
-
-typedef struct _rh_stats {
-        unsigned long start;
-        int size;
-        const char *owner;
-} rh_stats_t;
-
-#define RHGS_FREE       0
-#define RHGS_TAKEN      1
-
-/* Create a remote heap dynamically */
-extern rh_info_t *rh_create(unsigned int alignment);
-
-/* Destroy a remote heap, created by rh_create() */
-extern void rh_destroy(rh_info_t * info);
-
-/* Initialize in place a remote info block */
-extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
-                    rh_block_t * block);
-
-/* Attach a free region to manage */
-extern int rh_attach_region(rh_info_t * info, unsigned long start, int size);
-
-/* Detach a free region */
-extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size);
-
-/* Allocate the given size from the remote heap (with alignment) */
-extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment,
-                const char *owner);
-
-/* Allocate the given size from the remote heap */
-extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner);
-
-/* Allocate the given size from the given address */
-extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size,
-                            const char *owner);
-
-/* Free the allocated area */
-extern int rh_free(rh_info_t * info, unsigned long start);
-
-/* Get stats for debugging purposes */
-extern int rh_get_stats(rh_info_t * info, int what, int max_stats,
-                        rh_stats_t * stats);
-
-/* Simple dump of remote heap info */
-extern void rh_dump(rh_info_t * info);
-
-/* Set owner of taken block */
-extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner);
-
-#endif                          /* __ASM_PPC_RHEAP_H__ */
diff --git a/include/asm-powerpc/rio.h b/include/asm-powerpc/rio.h
deleted file mode 100644
index 0018bf80cb25..000000000000
--- a/include/asm-powerpc/rio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * RapidIO architecture support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef ASM_PPC_RIO_H
-#define ASM_PPC_RIO_H
-
-extern void platform_rio_init(void);
-
-#endif                          /* ASM_PPC_RIO_H */
diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h
deleted file mode 100644
index 8eaa7b28d9d0..000000000000
--- a/include/asm-powerpc/rtas.h
+++ /dev/null
@@ -1,247 +0,0 @@
-#ifndef _POWERPC_RTAS_H
-#define _POWERPC_RTAS_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <asm/page.h>
-
-/*
- * Definitions for talking to the RTAS on CHRP machines.
- *
- * Copyright (C) 2001 Peter Bergner
- * Copyright (C) 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define RTAS_UNKNOWN_SERVICE (-1)
-#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
-
-/* Buffer size for ppc_rtas system call. */
-#define RTAS_RMOBUF_MAX (64 * 1024)
-
-/* RTAS return status codes */
-#define RTAS_NOT_SUSPENDABLE    -9004
-#define RTAS_BUSY               -2    /* RTAS Busy */
-#define RTAS_EXTENDED_DELAY_MIN 9900
-#define RTAS_EXTENDED_DELAY_MAX 9905
-
-/*
- * In general to call RTAS use rtas_token("string") to lookup
- * an RTAS token for the given string (e.g. "event-scan").
- * To actually perform the call use
- *    ret = rtas_call(token, n_in, n_out, ...)
- * Where n_in is the number of input parameters and
- *       n_out is the number of output parameters
- *
- * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
- * will be returned as a token.  rtas_call() does look for this
- * token and error out gracefully so rtas_call(rtas_token("str"), ...)
- * may be safely used for one-shot calls to RTAS.
- *
- */
-
-typedef u32 rtas_arg_t;
-
-struct rtas_args {
-        u32 token;
-        u32 nargs;
-        u32 nret; 
-        rtas_arg_t args[16];
-        rtas_arg_t *rets;     /* Pointer to return values in args[]. */
-};  
-
-struct rtas_t {
-        unsigned long entry;            /* physical address pointer */
-        unsigned long base;             /* physical address pointer */
-        unsigned long size;
-        spinlock_t lock;
-        struct rtas_args args;
-        struct device_node *dev;        /* virtual address pointer */
-};
-
-/* RTAS event classes */
-#define RTAS_INTERNAL_ERROR             0x80000000 /* set bit 0 */
-#define RTAS_EPOW_WARNING               0x40000000 /* set bit 1 */
-#define RTAS_POWERMGM_EVENTS            0x20000000 /* set bit 2 */
-#define RTAS_HOTPLUG_EVENTS             0x10000000 /* set bit 3 */
-#define RTAS_EVENT_SCAN_ALL_EVENTS      0xf0000000
-
-/* RTAS event severity */
-#define RTAS_SEVERITY_FATAL             0x5
-#define RTAS_SEVERITY_ERROR             0x4
-#define RTAS_SEVERITY_ERROR_SYNC        0x3
-#define RTAS_SEVERITY_WARNING           0x2
-#define RTAS_SEVERITY_EVENT             0x1
-#define RTAS_SEVERITY_NO_ERROR          0x0
-
-/* RTAS event disposition */
-#define RTAS_DISP_FULLY_RECOVERED       0x0
-#define RTAS_DISP_LIMITED_RECOVERY      0x1
-#define RTAS_DISP_NOT_RECOVERED         0x2
-
-/* RTAS event initiator */
-#define RTAS_INITIATOR_UNKNOWN          0x0
-#define RTAS_INITIATOR_CPU              0x1
-#define RTAS_INITIATOR_PCI              0x2
-#define RTAS_INITIATOR_ISA              0x3
-#define RTAS_INITIATOR_MEMORY           0x4
-#define RTAS_INITIATOR_POWERMGM         0x5
-
-/* RTAS event target */
-#define RTAS_TARGET_UNKNOWN             0x0
-#define RTAS_TARGET_CPU                 0x1
-#define RTAS_TARGET_PCI                 0x2
-#define RTAS_TARGET_ISA                 0x3
-#define RTAS_TARGET_MEMORY              0x4
-#define RTAS_TARGET_POWERMGM            0x5
-
-/* RTAS event type */
-#define RTAS_TYPE_RETRY                 0x01
-#define RTAS_TYPE_TCE_ERR               0x02
-#define RTAS_TYPE_INTERN_DEV_FAIL       0x03
-#define RTAS_TYPE_TIMEOUT               0x04
-#define RTAS_TYPE_DATA_PARITY           0x05
-#define RTAS_TYPE_ADDR_PARITY           0x06
-#define RTAS_TYPE_CACHE_PARITY          0x07
-#define RTAS_TYPE_ADDR_INVALID          0x08
-#define RTAS_TYPE_ECC_UNCORR            0x09
-#define RTAS_TYPE_ECC_CORR              0x0a
-#define RTAS_TYPE_EPOW                  0x40
-#define RTAS_TYPE_PLATFORM              0xE0
-#define RTAS_TYPE_IO                    0xE1
-#define RTAS_TYPE_INFO                  0xE2
-#define RTAS_TYPE_DEALLOC               0xE3
-#define RTAS_TYPE_DUMP                  0xE4
-/* I don't add PowerMGM events right now, this is a different topic */ 
-#define RTAS_TYPE_PMGM_POWER_SW_ON      0x60
-#define RTAS_TYPE_PMGM_POWER_SW_OFF     0x61
-#define RTAS_TYPE_PMGM_LID_OPEN         0x62
-#define RTAS_TYPE_PMGM_LID_CLOSE        0x63
-#define RTAS_TYPE_PMGM_SLEEP_BTN        0x64
-#define RTAS_TYPE_PMGM_WAKE_BTN         0x65
-#define RTAS_TYPE_PMGM_BATTERY_WARN     0x66
-#define RTAS_TYPE_PMGM_BATTERY_CRIT     0x67
-#define RTAS_TYPE_PMGM_SWITCH_TO_BAT    0x68
-#define RTAS_TYPE_PMGM_SWITCH_TO_AC     0x69
-#define RTAS_TYPE_PMGM_KBD_OR_MOUSE     0x6a
-#define RTAS_TYPE_PMGM_ENCLOS_OPEN      0x6b
-#define RTAS_TYPE_PMGM_ENCLOS_CLOSED    0x6c
-#define RTAS_TYPE_PMGM_RING_INDICATE    0x6d
-#define RTAS_TYPE_PMGM_LAN_ATTENTION    0x6e
-#define RTAS_TYPE_PMGM_TIME_ALARM       0x6f
-#define RTAS_TYPE_PMGM_CONFIG_CHANGE    0x70
-#define RTAS_TYPE_PMGM_SERVICE_PROC     0x71
-
-struct rtas_error_log {
-        unsigned long version:8;                /* Architectural version */
-        unsigned long severity:3;               /* Severity level of error */
-        unsigned long disposition:2;            /* Degree of recovery */
-        unsigned long extended:1;               /* extended log present? */
-        unsigned long /* reserved */ :2;        /* Reserved for future use */
-        unsigned long initiator:4;              /* Initiator of event */
-        unsigned long target:4;                 /* Target of failed operation */
-        unsigned long type:8;                   /* General event or error*/
-        unsigned long extended_log_length:32;   /* length in bytes */
-        unsigned char buffer[1];
-};
-
-/*
- * This can be set by the rtas_flash module so that it can get called
- * as the absolutely last thing before the kernel terminates.
- */
-extern void (*rtas_flash_term_hook)(int);
-
-extern struct rtas_t rtas;
-
-extern void enter_rtas(unsigned long);
-extern int rtas_token(const char *service);
-extern int rtas_service_present(const char *service);
-extern int rtas_call(int token, int, int, int *, ...);
-extern void rtas_restart(char *cmd);
-extern void rtas_power_off(void);
-extern void rtas_halt(void);
-extern void rtas_os_term(char *str);
-extern int rtas_get_sensor(int sensor, int index, int *state);
-extern int rtas_get_power_level(int powerdomain, int *level);
-extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
-extern int rtas_set_indicator(int indicator, int index, int new_value);
-extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
-extern void rtas_progress(char *s, unsigned short hex);
-extern void rtas_initialize(void);
-
-struct rtc_time;
-extern unsigned long rtas_get_boot_time(void);
-extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
-extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
-
-extern unsigned int rtas_busy_delay_time(int status);
-extern unsigned int rtas_busy_delay(int status);
-
-extern int early_init_dt_scan_rtas(unsigned long node,
-                const char *uname, int depth, void *data);
-
-extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
-
-/* Error types logged.  */
-#define ERR_FLAG_ALREADY_LOGGED 0x0
-#define ERR_FLAG_BOOT           0x1     /* log was pulled from NVRAM on boot */
-#define ERR_TYPE_RTAS_LOG       0x2     /* from rtas event-scan */
-#define ERR_TYPE_KERNEL_PANIC   0x4     /* from panic() */
-
-/* All the types and not flags */
-#define ERR_TYPE_MASK   (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
-
-#define RTAS_DEBUG KERN_DEBUG "RTAS: "
- 
-#define RTAS_ERROR_LOG_MAX 2048
-
-/*
- * Return the firmware-specified size of the error log buffer
- *  for all rtas calls that require an error buffer argument.
- *  This includes 'check-exception' and 'rtas-last-error'.
- */
-extern int rtas_get_error_log_max(void);
-
-/* Event Scan Parameters */
-#define EVENT_SCAN_ALL_EVENTS   0xf0000000
-#define SURVEILLANCE_TOKEN      9000
-#define LOG_NUMBER              64              /* must be a power of two */
-#define LOG_NUMBER_MASK         (LOG_NUMBER-1)
-
-/* Some RTAS ops require a data buffer and that buffer must be < 4G.
- * Rather than having a memory allocator, just use this buffer
- * (get the lock first), make the RTAS call.  Copy the data instead
- * of holding the buffer for long.
- */
-
-#define RTAS_DATA_BUF_SIZE 4096
-extern spinlock_t rtas_data_buf_lock;
-extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
-
-/* RMO buffer reserved for user-space RTAS use */
-extern unsigned long rtas_rmo_buf;
-
-#define GLOBAL_INTERRUPT_QUEUE 9005
-
-/**
- * rtas_config_addr - Format a busno, devfn and reg for RTAS.
- * @busno: The bus number.
- * @devfn: The device and function number as encoded by PCI_DEVFN().
- * @reg: The register number.
- *
- * This function encodes the given busno, devfn and register number as
- * required for RTAS calls that take a "config_addr" parameter.
- * See PAPR requirement 7.3.4-1 for more info.
- */
-static inline u32 rtas_config_addr(int busno, int devfn, int reg)
-{
-        return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) |
-                        (devfn << 8) | (reg & 0xff);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_RTAS_H */
diff --git a/include/asm-powerpc/rtc.h b/include/asm-powerpc/rtc.h
deleted file mode 100644
index f5802926b6c0..000000000000
--- a/include/asm-powerpc/rtc.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Real-time clock definitions and interfaces
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on:
- * include/asm-m68k/rtc.h
- *
- * Copyright Richard Zidlicky
- * implementation details for genrtc/q40rtc driver
- *
- * And the old drivers/macintosh/rtc.c which was heavily based on:
- * Linux/SPARC Real Time Clock Driver
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- *
- * With additional work by Paul Mackerras and Franz Sirl.
- */
-
-#ifndef __ASM_POWERPC_RTC_H__
-#define __ASM_POWERPC_RTC_H__
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/time.h>
-
-#define RTC_PIE 0x40            /* periodic interrupt enable */
-#define RTC_AIE 0x20            /* alarm interrupt enable */
-#define RTC_UIE 0x10            /* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100      /* battery bad */
-#define RTC_SQWE 0x08           /* enable square-wave output */
-#define RTC_DM_BINARY 0x04      /* all time/date values are BCD if clear */
-#define RTC_24H 0x02            /* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01         /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
-        if (ppc_md.get_rtc_time)
-                ppc_md.get_rtc_time(time);
-        return RTC_24H;
-}
-
-/* Set the current date and time in the real time clock. */
-static inline int set_rtc_time(struct rtc_time *time)
-{
-        if (ppc_md.set_rtc_time)
-                return ppc_md.set_rtc_time(time);
-        return -EINVAL;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
-        struct rtc_time h;
-
-        get_rtc_time(&h);
-        return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
-        return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
-        return -EINVAL;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_RTC_H__ */
diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h
deleted file mode 100644
index a6cc93b78b98..000000000000
--- a/include/asm-powerpc/rwsem.h
+++ /dev/null
@@ -1,173 +0,0 @@
-#ifndef _ASM_POWERPC_RWSEM_H
-#define _ASM_POWERPC_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
-#endif
-
-#ifdef __KERNEL__
-
-/*
- * include/asm-powerpc/rwsem.h: R/W semaphores for PPC using the stuff
- * in lib/rwsem.c.  Adapted largely from include/asm-i386/rwsem.h
- * by Paul Mackerras <paulus@samba.org>.
- */
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
-        /* XXX this should be able to be an atomic_t  -- paulus */
-        signed int              count;
-#define RWSEM_UNLOCKED_VALUE            0x00000000
-#define RWSEM_ACTIVE_BIAS               0x00000001
-#define RWSEM_ACTIVE_MASK               0x0000ffff
-#define RWSEM_WAITING_BIAS              (-0x00010000)
-#define RWSEM_ACTIVE_READ_BIAS          RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS         (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-        spinlock_t              wait_lock;
-        struct list_head        wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-        struct lockdep_map      dep_map;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
-        { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
-          LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
-
-#define DECLARE_RWSEM(name)             \
-        struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
-                         struct lock_class_key *key);
-
-#define init_rwsem(sem)                                 \
-        do {                                            \
-                static struct lock_class_key __key;     \
-                                                        \
-                __init_rwsem((sem), #sem, &__key);      \
-        } while (0)
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
-        if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0))
-                rwsem_down_read_failed(sem);
-}
-
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
-        int tmp;
-
-        while ((tmp = sem->count) >= 0) {
-                if (tmp == cmpxchg(&sem->count, tmp,
-                                   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-                        return 1;
-                }
-        }
-        return 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-        int tmp;
-
-        tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
-                                (atomic_t *)(&sem->count));
-        if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
-                rwsem_down_write_failed(sem);
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
-        __down_write_nested(sem, 0);
-}
-
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
-        int tmp;
-
-        tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
-                      RWSEM_ACTIVE_WRITE_BIAS);
-        return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
-        int tmp;
-
-        tmp = atomic_dec_return((atomic_t *)(&sem->count));
-        if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
-                rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
-        if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
-                              (atomic_t *)(&sem->count)) < 0))
-                rwsem_wake(sem);
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
-{
-        atomic_add(delta, (atomic_t *)(&sem->count));
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
-        int tmp;
-
-        tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
-        if (tmp < 0)
-                rwsem_downgrade_wake(sem);
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
-{
-        return atomic_add_return(delta, (atomic_t *)(&sem->count));
-}
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-        return (sem->count != 0);
-}
-
-#endif  /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_RWSEM_H */
diff --git a/include/asm-powerpc/scatterlist.h b/include/asm-powerpc/scatterlist.h
deleted file mode 100644
index fcf7d55afe45..000000000000
--- a/include/asm-powerpc/scatterlist.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _ASM_POWERPC_SCATTERLIST_H
-#define _ASM_POWERPC_SCATTERLIST_H
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#include <asm/dma.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-        unsigned long sg_magic;
-#endif
-        unsigned long page_link;
-        unsigned int offset;
-        unsigned int length;
-
-        /* For TCE support */
-        dma_addr_t dma_address;
-        u32 dma_length;
-};
-
-/*
- * These macros should be used after a dma_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#ifdef __powerpc64__
-#define sg_dma_len(sg)          ((sg)->dma_length)
-#else
-#define sg_dma_len(sg)          ((sg)->length)
-#endif
-
-#ifdef __powerpc64__
-#define ISA_DMA_THRESHOLD       (~0UL)
-#endif
-
-#define ARCH_HAS_SG_CHAIN
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/include/asm-powerpc/seccomp.h b/include/asm-powerpc/seccomp.h
deleted file mode 100644
index 853765eb1f65..000000000000
--- a/include/asm-powerpc/seccomp.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_SECCOMP_H
-#define _ASM_POWERPC_SECCOMP_H
-
-#ifdef __KERNEL__
-#include <linux/thread_info.h>
-#endif
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#define __NR_seccomp_read_32 __NR_read
-#define __NR_seccomp_write_32 __NR_write
-#define __NR_seccomp_exit_32 __NR_exit
-#define __NR_seccomp_sigreturn_32 __NR_sigreturn
-
-#endif  /* _ASM_POWERPC_SECCOMP_H */
diff --git a/include/asm-powerpc/sections.h b/include/asm-powerpc/sections.h
deleted file mode 100644
index 916018e425c4..000000000000
--- a/include/asm-powerpc/sections.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_POWERPC_SECTIONS_H
-#define _ASM_POWERPC_SECTIONS_H
-#ifdef __KERNEL__
-
-#include <asm-generic/sections.h>
-
-#ifdef __powerpc64__
-
-extern char _end[];
-
-static inline int in_kernel_text(unsigned long addr)
-{
-        if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end)
-                return 1;
-
-        return 0;
-}
-
-#endif
-
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_SECTIONS_H */
diff --git a/include/asm-powerpc/sembuf.h b/include/asm-powerpc/sembuf.h
deleted file mode 100644
index 99a41938ae3d..000000000000
--- a/include/asm-powerpc/sembuf.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _ASM_POWERPC_SEMBUF_H
-#define _ASM_POWERPC_SEMBUF_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * The semid64_ds structure for PPC architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-        struct ipc64_perm sem_perm;     /* permissions .. see ipc.h */
-#ifndef __powerpc64__
-        unsigned long   __unused1;
-#endif
-        __kernel_time_t sem_otime;      /* last semop time */
-#ifndef __powerpc64__
-        unsigned long   __unused2;
-#endif
-        __kernel_time_t sem_ctime;      /* last change time */
-        unsigned long   sem_nsems;      /* no. of semaphores in array */
-        unsigned long   __unused3;
-        unsigned long   __unused4;
-};
-
-#endif  /* _ASM_POWERPC_SEMBUF_H */
diff --git a/include/asm-powerpc/serial.h b/include/asm-powerpc/serial.h
deleted file mode 100644
index 3e8589b43cb2..000000000000
--- a/include/asm-powerpc/serial.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_SERIAL_H
-#define _ASM_POWERPC_SERIAL_H
-
-/*
- * Serial ports are not listed here, because they are discovered
- * through the device tree.
- */
-
-/* Default baud base if not found in device-tree */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#ifdef CONFIG_PPC_UDBG_16550
-extern void find_legacy_serial_ports(void);
-#else
-#define find_legacy_serial_ports()      do { } while (0)
-#endif
-
-#endif /* _PPC64_SERIAL_H */
diff --git a/include/asm-powerpc/setjmp.h b/include/asm-powerpc/setjmp.h
deleted file mode 100644
index 279d03a1eec6..000000000000
--- a/include/asm-powerpc/setjmp.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright © 2008 Michael Neuling IBM Corporation
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- *
- */
-#ifndef _ASM_POWERPC_SETJMP_H
-#define _ASM_POWERPC_SETJMP_H
-
-#define JMP_BUF_LEN    23
-
-extern long setjmp(long *);
-extern void longjmp(long *, long);
-
-#endif /* _ASM_POWERPC_SETJMP_H */
diff --git a/include/asm-powerpc/setup.h b/include/asm-powerpc/setup.h
deleted file mode 100644
index 817fac0a0714..000000000000
--- a/include/asm-powerpc/setup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_POWERPC_SETUP_H
-#define _ASM_POWERPC_SETUP_H
-
-#define COMMAND_LINE_SIZE       512
-
-#endif  /* _ASM_POWERPC_SETUP_H */
diff --git a/include/asm-powerpc/shmbuf.h b/include/asm-powerpc/shmbuf.h
deleted file mode 100644
index 8efa39698b6c..000000000000
--- a/include/asm-powerpc/shmbuf.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _ASM_POWERPC_SHMBUF_H
-#define _ASM_POWERPC_SHMBUF_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * The shmid64_ds structure for PPC architecture.
- *
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-        struct ipc64_perm       shm_perm;       /* operation perms */
-#ifndef __powerpc64__
-        unsigned long           __unused1;
-#endif
-        __kernel_time_t         shm_atime;      /* last attach time */
-#ifndef __powerpc64__
-        unsigned long           __unused2;
-#endif
-        __kernel_time_t         shm_dtime;      /* last detach time */
-#ifndef __powerpc64__
-        unsigned long           __unused3;
-#endif
-        __kernel_time_t         shm_ctime;      /* last change time */
-#ifndef __powerpc64__
-        unsigned long           __unused4;
-#endif
-        size_t                  shm_segsz;      /* size of segment (bytes) */
-        __kernel_pid_t          shm_cpid;       /* pid of creator */
-        __kernel_pid_t          shm_lpid;       /* pid of last operator */
-        unsigned long           shm_nattch;     /* no. of current attaches */
-        unsigned long           __unused5;
-        unsigned long           __unused6;
-};
-
-struct shminfo64 {
-        unsigned long   shmmax;
-        unsigned long   shmmin;
-        unsigned long   shmmni;
-        unsigned long   shmseg;
-        unsigned long   shmall;
-        unsigned long   __unused1;
-        unsigned long   __unused2;
-        unsigned long   __unused3;
-        unsigned long   __unused4;
-};
-
-#endif  /* _ASM_POWERPC_SHMBUF_H */
diff --git a/include/asm-powerpc/shmparam.h b/include/asm-powerpc/shmparam.h
deleted file mode 100644
index 5cda42a6d39e..000000000000
--- a/include/asm-powerpc/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_POWERPC_SHMPARAM_H
-#define _ASM_POWERPC_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
-
-#endif  /* _ASM_POWERPC_SHMPARAM_H */
diff --git a/include/asm-powerpc/sigcontext.h b/include/asm-powerpc/sigcontext.h
deleted file mode 100644
index 9c1f24fd5d11..000000000000
--- a/include/asm-powerpc/sigcontext.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _ASM_POWERPC_SIGCONTEXT_H
-#define _ASM_POWERPC_SIGCONTEXT_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#ifdef __powerpc64__
-#include <asm/elf.h>
-#endif
-
-struct sigcontext {
-        unsigned long   _unused[4];
-        int             signal;
-#ifdef __powerpc64__
-        int             _pad0;
-#endif
-        unsigned long   handler;
-        unsigned long   oldmask;
-        struct pt_regs  __user *regs;
-#ifdef __powerpc64__
-        elf_gregset_t   gp_regs;
-        elf_fpregset_t  fp_regs;
-/*
- * To maintain compatibility with current implementations the sigcontext is
- * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t)
- * followed by an unstructured (vmx_reserve) field of 69 doublewords.  This
- * allows the array of vector registers to be quadword aligned independent of
- * the alignment of the containing sigcontext or ucontext. It is the
- * responsibility of the code setting the sigcontext to set this pointer to
- * either NULL (if this processor does not support the VMX feature) or the
- * address of the first quadword within the allocated (vmx_reserve) area.
- *
- * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with
- * an array of 34 quadword entries (elf_vrregset_t).  The entries with
- * indexes 0-31 contain the corresponding vector registers.  The entry with
- * index 32 contains the vscr as the last word (offset 12) within the
- * quadword.  This allows the vscr to be stored as either a quadword (since
- * it must be copied via a vector register to/from storage) or as a word.
- * The entry with index 33 contains the vrsave as the first word (offset 0)
- * within the quadword.
- *
- * Part of the VSX data is stored here also by extending vmx_restore
- * by an additional 32 double words.  Architecturally the layout of
- * the VSR registers and how they overlap on top of the legacy FPR and
- * VR registers is shown below:
- *
- *                    VSR doubleword 0               VSR doubleword 1
- *           ----------------------------------------------------------------
- *   VSR[0]  |             FPR[0]            |                              |
- *           ----------------------------------------------------------------
- *   VSR[1]  |             FPR[1]            |                              |
- *           ----------------------------------------------------------------
- *           |              ...              |                              |
- *           |              ...              |                              |
- *           ----------------------------------------------------------------
- *   VSR[30] |             FPR[30]           |                              |
- *           ----------------------------------------------------------------
- *   VSR[31] |             FPR[31]           |                              |
- *           ----------------------------------------------------------------
- *   VSR[32] |                             VR[0]                            |
- *           ----------------------------------------------------------------
- *   VSR[33] |                             VR[1]                            |
- *           ----------------------------------------------------------------
- *           |                              ...                             |
- *           |                              ...                             |
- *           ----------------------------------------------------------------
- *   VSR[62] |                             VR[30]                           |
- *           ----------------------------------------------------------------
- *   VSR[63] |                             VR[31]                           |
- *           ----------------------------------------------------------------
- *
- * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63
- * is stored at the start of vmx_reserve.  vmx_reserve is extended for
- * backwards compatility to store VSR 0-31 doubleword 1 after the VMX
- * registers and vscr/vrsave.
- */
-        elf_vrreg_t     __user *v_regs;
-        long            vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1];
-#endif
-};
-
-#endif /* _ASM_POWERPC_SIGCONTEXT_H */
diff --git a/include/asm-powerpc/siginfo.h b/include/asm-powerpc/siginfo.h
deleted file mode 100644
index 12f1bce037be..000000000000
--- a/include/asm-powerpc/siginfo.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _ASM_POWERPC_SIGINFO_H
-#define _ASM_POWERPC_SIGINFO_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __powerpc64__
-#    define __ARCH_SI_PREAMBLE_SIZE     (4 * sizeof(int))
-#    define SI_PAD_SIZE32               ((SI_MAX_SIZE/sizeof(int)) - 3)
-#endif
-
-#include <asm-generic/siginfo.h>
-
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRANCH     (__SI_FAULT|3)  /* process taken branch trap */
-#define TRAP_HWBKPT     (__SI_FAULT|4)  /* hardware breakpoint or watchpoint */
-#undef NSIGTRAP
-#define NSIGTRAP        4
-
-#endif  /* _ASM_POWERPC_SIGINFO_H */
diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h
deleted file mode 100644
index a7360cdd99eb..000000000000
--- a/include/asm-powerpc/signal.h
+++ /dev/null
@@ -1,150 +0,0 @@
-#ifndef _ASM_POWERPC_SIGNAL_H
-#define _ASM_POWERPC_SIGNAL_H
-
-#include <linux/types.h>
-
-#define _NSIG           64
-#ifdef __powerpc64__
-#define _NSIG_BPW       64
-#else
-#define _NSIG_BPW       32
-#endif
-#define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;             /* at least 32 bits */
-
-typedef struct {
-        unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define SIGHUP           1
-#define SIGINT           2
-#define SIGQUIT          3
-#define SIGILL           4
-#define SIGTRAP          5
-#define SIGABRT          6
-#define SIGIOT           6
-#define SIGBUS           7
-#define SIGFPE           8
-#define SIGKILL          9
-#define SIGUSR1         10
-#define SIGSEGV         11
-#define SIGUSR2         12
-#define SIGPIPE         13
-#define SIGALRM         14
-#define SIGTERM         15
-#define SIGSTKFLT       16
-#define SIGCHLD         17
-#define SIGCONT         18
-#define SIGSTOP         19
-#define SIGTSTP         20
-#define SIGTTIN         21
-#define SIGTTOU         22
-#define SIGURG          23
-#define SIGXCPU         24
-#define SIGXFSZ         25
-#define SIGVTALRM       26
-#define SIGPROF         27
-#define SIGWINCH        28
-#define SIGIO           29
-#define SIGPOLL         SIGIO
-/*
-#define SIGLOST         29
-*/
-#define SIGPWR          30
-#define SIGSYS          31
-#define SIGUNUSED       31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN        32
-#define SIGRTMAX        _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP    0x00000001U
-#define SA_NOCLDWAIT    0x00000002U
-#define SA_SIGINFO      0x00000004U
-#define SA_ONSTACK      0x08000000U
-#define SA_RESTART      0x10000000U
-#define SA_NODEFER      0x40000000U
-#define SA_RESETHAND    0x80000000U
-
-#define SA_NOMASK       SA_NODEFER
-#define SA_ONESHOT      SA_RESETHAND
-
-#define SA_RESTORER     0x04000000U
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK      1
-#define SS_DISABLE      2
-
-#define MINSIGSTKSZ     2048
-#define SIGSTKSZ        8192
-
-#include <asm-generic/signal.h>
-
-struct old_sigaction {
-        __sighandler_t sa_handler;
-        old_sigset_t sa_mask;
-        unsigned long sa_flags;
-        __sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-        __sighandler_t sa_handler;
-        unsigned long sa_flags;
-        __sigrestore_t sa_restorer;
-        sigset_t sa_mask;               /* mask last for extensibility */
-};
-
-struct k_sigaction {
-        struct sigaction sa;
-};
-
-typedef struct sigaltstack {
-        void __user *ss_sp;
-        int ss_flags;
-        size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-struct pt_regs;
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#endif /* __KERNEL__ */
-
-#ifndef __powerpc64__
-/*
- * These are parameters to dbg_sigreturn syscall.  They enable or
- * disable certain debugging things that can be done from signal
- * handlers.  The dbg_sigreturn syscall *must* be called from a
- * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
- * array of struct sig_dbg_op, which has the debug operations to
- * perform before returning from the signal.
- */
-struct sig_dbg_op {
-        int dbg_type;
-        unsigned long dbg_value;
-};
-
-/* Enable or disable single-stepping.  The value sets the state. */
-#define SIG_DBG_SINGLE_STEPPING         1
-
-/* Enable or disable branch tracing.  The value sets the state. */
-#define SIG_DBG_BRANCH_TRACING          2
-#endif /* ! __powerpc64__ */
-
-#endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h
deleted file mode 100644
index 4d28e1e4521b..000000000000
--- a/include/asm-powerpc/smp.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* 
- * smp.h: PowerPC-specific SMP code.
- *
- * Original was a copy of sparc smp.h.  Now heavily modified
- * for PPC.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_SMP_H
-#define _ASM_POWERPC_SMP_H
-#ifdef __KERNEL__
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/kernel.h>
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-#endif
-#include <asm/percpu.h>
-
-extern int boot_cpuid;
-
-extern void cpu_die(void);
-
-#ifdef CONFIG_SMP
-
-extern void smp_send_debugger_break(int cpu);
-extern void smp_message_recv(int);
-
-DECLARE_PER_CPU(unsigned int, pvr);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(cpumask_t map);
-int generic_cpu_disable(void);
-int generic_cpu_enable(unsigned int cpu);
-void generic_cpu_die(unsigned int cpu);
-void generic_mach_cpu_die(void);
-#endif
-
-#ifdef CONFIG_PPC64
-#define raw_smp_processor_id()  (local_paca->paca_index)
-#define hard_smp_processor_id() (get_paca()->hw_cpu_id)
-#else
-/* 32-bit */
-extern int smp_hw_index[];
-
-#define raw_smp_processor_id()  (current_thread_info()->cpu)
-#define hard_smp_processor_id()         (smp_hw_index[smp_processor_id()])
-#define get_hard_smp_processor_id(cpu)  (smp_hw_index[(cpu)])
-#define set_hard_smp_processor_id(cpu, phys)\
-                                        (smp_hw_index[(cpu)] = (phys))
-#endif
-
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-DECLARE_PER_CPU(cpumask_t, cpu_core_map);
-extern int cpu_to_core_id(int cpu);
-
-/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
- *
- * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
- * in /proc/interrupts will be wrong!!! --Troy */
-#define PPC_MSG_CALL_FUNCTION   0
-#define PPC_MSG_RESCHEDULE      1
-#define PPC_MSG_CALL_FUNC_SINGLE        2
-#define PPC_MSG_DEBUGGER_BREAK  3
-
-void smp_init_iSeries(void);
-void smp_init_pSeries(void);
-void smp_init_cell(void);
-void smp_init_celleb(void);
-void smp_setup_cpu_maps(void);
-void smp_setup_cpu_sibling_map(void);
-
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-
-#else
-/* for UP */
-#define hard_smp_processor_id()         0
-#define smp_setup_cpu_maps()
-
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PPC64
-#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
-#define set_hard_smp_processor_id(CPU, VAL) \
-        do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
-
-extern void smp_release_cpus(void);
-
-#else
-/* 32-bit */
-#ifndef CONFIG_SMP
-extern int boot_cpuid_phys;
-#define get_hard_smp_processor_id(cpu)  boot_cpuid_phys
-#define set_hard_smp_processor_id(cpu, phys)
-#endif
-#endif
-
-extern int smt_enabled_at_boot;
-
-extern int smp_mpic_probe(void);
-extern void smp_mpic_setup_cpu(int cpu);
-extern void smp_generic_kick_cpu(int nr);
-
-extern void smp_generic_give_timebase(void);
-extern void smp_generic_take_timebase(void);
-
-extern struct smp_ops_t *smp_ops;
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SMP_H) */
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
deleted file mode 100644
index 7ae2753da565..000000000000
--- a/include/asm-powerpc/smu.h
+++ /dev/null
@@ -1,700 +0,0 @@
-#ifndef _SMU_H
-#define _SMU_H
-
-/*
- * Definitions for talking to the SMU chip in newer G5 PowerMacs
- */
-#ifdef __KERNEL__
-#include <linux/list.h>
-#endif
-#include <linux/types.h>
-
-/*
- * Known SMU commands
- *
- * Most of what is below comes from looking at the Open Firmware driver,
- * though this is still incomplete and could use better documentation here
- * or there...
- */
-
-
-/*
- * Partition info commands
- *
- * These commands are used to retrieve the sdb-partition-XX datas from
- * the SMU. The length is always 2. First byte is the subcommand code
- * and second byte is the partition ID.
- *
- * The reply is 6 bytes:
- *
- *  - 0..1 : partition address
- *  - 2    : a byte containing the partition ID
- *  - 3    : length (maybe other bits are rest of header ?)
- *
- * The data must then be obtained with calls to another command:
- * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below).
- */
-#define SMU_CMD_PARTITION_COMMAND               0x3e
-#define   SMU_CMD_PARTITION_LATEST              0x01
-#define   SMU_CMD_PARTITION_BASE                0x02
-#define   SMU_CMD_PARTITION_UPDATE              0x03
-
-
-/*
- * Fan control
- *
- * This is a "mux" for fan control commands. The command seem to
- * act differently based on the number of arguments. With 1 byte
- * of argument, this seem to be queries for fans status, setpoint,
- * etc..., while with 0xe arguments, we will set the fans speeds.
- *
- * Queries (1 byte arg):
- * ---------------------
- *
- * arg=0x01: read RPM fans status
- * arg=0x02: read RPM fans setpoint
- * arg=0x11: read PWM fans status
- * arg=0x12: read PWM fans setpoint
- *
- * the "status" queries return the current speed while the "setpoint" ones
- * return the programmed/target speed. It _seems_ that the result is a bit
- * mask in the first byte of active/available fans, followed by 6 words (16
- * bits) containing the requested speed.
- *
- * Setpoint (14 bytes arg):
- * ------------------------
- *
- * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the
- * mask of fans affected by the command. Followed by 6 words containing the
- * setpoint value for selected fans in the mask (or 0 if mask value is 0)
- */
-#define SMU_CMD_FAN_COMMAND                     0x4a
-
-
-/*
- * Battery access
- *
- * Same command number as the PMU, could it be same syntax ?
- */
-#define SMU_CMD_BATTERY_COMMAND                 0x6f
-#define   SMU_CMD_GET_BATTERY_INFO              0x00
-
-/*
- * Real time clock control
- *
- * This is a "mux", first data byte contains the "sub" command.
- * The "RTC" part of the SMU controls the date, time, powerup
- * timer, but also a PRAM
- *
- * Dates are in BCD format on 7 bytes:
- * [sec] [min] [hour] [weekday] [month day] [month] [year]
- * with month being 1 based and year minus 100
- */
-#define SMU_CMD_RTC_COMMAND                     0x8e
-#define   SMU_CMD_RTC_SET_PWRUP_TIMER           0x00 /* i: 7 bytes date */
-#define   SMU_CMD_RTC_GET_PWRUP_TIMER           0x01 /* o: 7 bytes date */
-#define   SMU_CMD_RTC_STOP_PWRUP_TIMER          0x02
-#define   SMU_CMD_RTC_SET_PRAM_BYTE_ACC         0x20 /* i: 1 byte (address?) */
-#define   SMU_CMD_RTC_SET_PRAM_AUTOINC          0x21 /* i: 1 byte (data?) */
-#define   SMU_CMD_RTC_SET_PRAM_LO_BYTES         0x22 /* i: 10 bytes */
-#define   SMU_CMD_RTC_SET_PRAM_HI_BYTES         0x23 /* i: 10 bytes */
-#define   SMU_CMD_RTC_GET_PRAM_BYTE             0x28 /* i: 1 bytes (address?) */
-#define   SMU_CMD_RTC_GET_PRAM_LO_BYTES         0x29 /* o: 10 bytes */
-#define   SMU_CMD_RTC_GET_PRAM_HI_BYTES         0x2a /* o: 10 bytes */
-#define   SMU_CMD_RTC_SET_DATETIME              0x80 /* i: 7 bytes date */
-#define   SMU_CMD_RTC_GET_DATETIME              0x81 /* o: 7 bytes date */
-
- /*
-  * i2c commands
-  *
-  * To issue an i2c command, first is to send a parameter block to the
-  * the SMU. This is a command of type 0x9a with 9 bytes of header
-  * eventually followed by data for a write:
-  *
-  * 0: bus number (from device-tree usually, SMU has lots of busses !)
-  * 1: transfer type/format (see below)
-  * 2: device address. For combined and combined4 type transfers, this
-  *    is the "write" version of the address (bit 0x01 cleared)
-  * 3: subaddress length (0..3)
-  * 4: subaddress byte 0 (or only byte for subaddress length 1)
-  * 5: subaddress byte 1
-  * 6: subaddress byte 2
-  * 7: combined address (device address for combined mode data phase)
-  * 8: data length
-  *
-  * The transfer types are the same good old Apple ones it seems,
-  * that is:
-  *   - 0x00: Simple transfer
-  *   - 0x01: Subaddress transfer (addr write + data tx, no restart)
-  *   - 0x02: Combined transfer (addr write + restart + data tx)
-  *
-  * This is then followed by actual data for a write.
-  *
-  * At this point, the OF driver seems to have a limitation on transfer
-  * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
-  * wether this is just an OF limit due to some temporary buffer size
-  * or if this is an SMU imposed limit. This driver has the same limitation
-  * for now as I use a 0x10 bytes temporary buffer as well
-  *
-  * Once that is completed, a response is expected from the SMU. This is
-  * obtained via a command of type 0x9a with a length of 1 byte containing
-  * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's
-  * though I can't tell yet if this is actually necessary. Once this command
-  * is complete, at this point, all I can tell is what OF does. OF tests
-  * byte 0 of the reply:
-  *   - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ?
-  *   - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0)
-  *   - on write, < 0 -> failure (immediate exit)
-  *   - else, OF just exists (without error, weird)
-  *
-  * So on read, there is this wait-for-busy thing when getting a 0xfc or
-  * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and
-  * doing the above again until either the retries expire or the result
-  * is no longer 0xfe or 0xfc
-  *
-  * The Darwin I2C driver is less subtle though. On any non-success status
-  * from the response command, it waits 5ms and tries again up to 20 times,
-  * it doesn't differenciate between fatal errors or "busy" status.
-  *
-  * This driver provides an asynchronous paramblock based i2c command
-  * interface to be used either directly by low level code or by a higher
-  * level driver interfacing to the linux i2c layer. The current
-  * implementation of this relies on working timers & timer interrupts
-  * though, so be careful of calling context for now. This may be "fixed"
-  * in the future by adding a polling facility.
-  */
-#define SMU_CMD_I2C_COMMAND                     0x9a
-          /* transfer types */
-#define   SMU_I2C_TRANSFER_SIMPLE       0x00
-#define   SMU_I2C_TRANSFER_STDSUB       0x01
-#define   SMU_I2C_TRANSFER_COMBINED     0x02
-
-/*
- * Power supply control
- *
- * The "sub" command is an ASCII string in the data, the
- * data length is that of the string.
- *
- * The VSLEW command can be used to get or set the voltage slewing.
- *  - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
- *    reply at data offset 6, 7 and 8.
- *  - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
- *    used to set the voltage slewing point. The SMU replies with "DONE"
- * I yet have to figure out their exact meaning of those 3 bytes in
- * both cases. They seem to be:
- *  x = processor mask
- *  y = op. point index
- *  z = processor freq. step index
- * I haven't yet decyphered result codes
- *
- */
-#define SMU_CMD_POWER_COMMAND                   0xaa
-#define   SMU_CMD_POWER_RESTART                 "RESTART"
-#define   SMU_CMD_POWER_SHUTDOWN                "SHUTDOWN"
-#define   SMU_CMD_POWER_VOLTAGE_SLEW            "VSLEW"
-
-/*
- * Read ADC sensors
- *
- * This command takes one byte of parameter: the sensor ID (or "reg"
- * value in the device-tree) and returns a 16 bits value
- */
-#define SMU_CMD_READ_ADC                        0xd8
-
-
-/* Misc commands
- *
- * This command seem to be a grab bag of various things
- *
- * Parameters:
- *   1: subcommand
- */
-#define SMU_CMD_MISC_df_COMMAND                 0xdf
-
-/*
- * Sets "system ready" status
- *
- * I did not yet understand how it exactly works or what it does.
- *
- * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used
- * the same codebase for all OF versions. On PowerBooks, this command would
- * enable the backlight. For the G5s, it only activates the front LED. However,
- * don't take this for granted.
- *
- * Parameters:
- *   2: status [0x00, 0x01 or 0x02]
- */
-#define   SMU_CMD_MISC_df_SET_DISPLAY_LIT       0x02
-
-/*
- * Sets mode of power switch.
- *
- * What this actually does is not yet known. Maybe it enables some interrupt.
- *
- * Parameters:
- *   2: enable power switch? [0x00 or 0x01]
- *   3 (optional): enable nmi? [0x00 or 0x01]
- *
- * Returns:
- *   If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
- *   NMI is enabled. Otherwise unknown.
- */
-#define   SMU_CMD_MISC_df_NMI_OPTION            0x04
-
-/* Sets LED dimm offset.
- *
- * The front LED dimms itself during sleep. Its brightness (or, well, the PWM
- * frequency) depends on current time. Therefore, the SMU needs to know the
- * timezone.
- *
- * Parameters:
- *   2-8: unknown (BCD coding)
- */
-#define   SMU_CMD_MISC_df_DIMM_OFFSET           0x99
-
-
-/*
- * Version info commands
- *
- * Parameters:
- *   1 (optional): Specifies version part to retrieve
- *
- * Returns:
- *   Version value
- */
-#define SMU_CMD_VERSION_COMMAND                 0xea
-#define   SMU_VERSION_RUNNING                   0x00
-#define   SMU_VERSION_BASE                      0x01
-#define   SMU_VERSION_UPDATE                    0x02
-
-
-/*
- * Switches
- *
- * These are switches whose status seems to be known to the SMU.
- *
- * Parameters:
- *   none
- *
- * Result:
- *   Switch bits (ORed, see below)
- */
-#define SMU_CMD_SWITCHES                        0xdc
-
-/* Switches bits */
-#define SMU_SWITCH_CASE_CLOSED                  0x01
-#define SMU_SWITCH_AC_POWER                     0x04
-#define SMU_SWITCH_POWER_SWITCH                 0x08
-
-
-/*
- * Misc commands
- *
- * This command seem to be a grab bag of various things
- *
- * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
- * transfer blocks of data from the SMU. So far, I've decrypted it's
- * usage to retrieve partition data. In order to do that, you have to
- * break your transfer in "chunks" since that command cannot transfer
- * more than a chunk at a time. The chunk size used by OF is 0xe bytes,
- * but it seems that the darwin driver will let you do 0x1e bytes if
- * your "PMU" version is >= 0x30. You can get the "PMU" version apparently
- * either in the last 16 bits of property "smu-version-pmu" or as the 16
- * bytes at offset 1 of "smu-version-info"
- *
- * For each chunk, the command takes 7 bytes of arguments:
- *  byte 0: subcommand code (0x02)
- *  byte 1: 0x04 (always, I don't know what it means, maybe the address
- *                space to use or some other nicety. It's hard coded in OF)
- *  byte 2..5: SMU address of the chunk (big endian 32 bits)
- *  byte 6: size to transfer (up to max chunk size)
- *
- * The data is returned directly
- */
-#define SMU_CMD_MISC_ee_COMMAND                 0xee
-#define   SMU_CMD_MISC_ee_GET_DATABLOCK_REC     0x02
-
-/* Retrieves currently used watts.
- *
- * Parameters:
- *   1: 0x03 (Meaning unknown)
- */
-#define   SMU_CMD_MISC_ee_GET_WATTS             0x03
-
-#define   SMU_CMD_MISC_ee_LEDS_CTRL             0x04 /* i: 00 (00,01) [00] */
-#define   SMU_CMD_MISC_ee_GET_DATA              0x05 /* i: 00 , o: ?? */
-
-
-/*
- * Power related commands
- *
- * Parameters:
- *   1: subcommand
- */
-#define SMU_CMD_POWER_EVENTS_COMMAND            0x8f
-
-/* SMU_POWER_EVENTS subcommands */
-enum {
-        SMU_PWR_GET_POWERUP_EVENTS      = 0x00,
-        SMU_PWR_SET_POWERUP_EVENTS      = 0x01,
-        SMU_PWR_CLR_POWERUP_EVENTS      = 0x02,
-        SMU_PWR_GET_WAKEUP_EVENTS       = 0x03,
-        SMU_PWR_SET_WAKEUP_EVENTS       = 0x04,
-        SMU_PWR_CLR_WAKEUP_EVENTS       = 0x05,
-
-        /*
-         * Get last shutdown cause
-         *
-         * Returns:
-         *   1 byte (signed char): Last shutdown cause. Exact meaning unknown.
-         */
-        SMU_PWR_LAST_SHUTDOWN_CAUSE     = 0x07,
-
-        /*
-         * Sets or gets server ID. Meaning or use is unknown.
-         *
-         * Parameters:
-         *   2 (optional): Set server ID (1 byte)
-         *
-         * Returns:
-         *   1 byte (server ID?)
-         */
-        SMU_PWR_SERVER_ID               = 0x08,
-};
-
-/* Power events wakeup bits */
-enum {
-        SMU_PWR_WAKEUP_KEY              = 0x01, /* Wake on key press */
-        SMU_PWR_WAKEUP_AC_INSERT        = 0x02, /* Wake on AC adapter plug */
-        SMU_PWR_WAKEUP_AC_CHANGE        = 0x04,
-        SMU_PWR_WAKEUP_LID_OPEN         = 0x08,
-        SMU_PWR_WAKEUP_RING             = 0x10,
-};
-
-
-/*
- * - Kernel side interface -
- */
-
-#ifdef __KERNEL__
-
-/*
- * Asynchronous SMU commands
- *
- * Fill up this structure and submit it via smu_queue_command(),
- * and get notified by the optional done() callback, or because
- * status becomes != 1
- */
-
-struct smu_cmd;
-
-struct smu_cmd
-{
-        /* public */
-        u8                      cmd;            /* command */
-        int                     data_len;       /* data len */
-        int                     reply_len;      /* reply len */
-        void                    *data_buf;      /* data buffer */
-        void                    *reply_buf;     /* reply buffer */
-        int                     status;         /* command status */
-        void                    (*done)(struct smu_cmd *cmd, void *misc);
-        void                    *misc;
-
-        /* private */
-        struct list_head        link;
-};
-
-/*
- * Queues an SMU command, all fields have to be initialized
- */
-extern int smu_queue_cmd(struct smu_cmd *cmd);
-
-/*
- * Simple command wrapper. This structure embeds a small buffer
- * to ease sending simple SMU commands from the stack
- */
-struct smu_simple_cmd
-{
-        struct smu_cmd  cmd;
-        u8              buffer[16];
-};
-
-/*
- * Queues a simple command. All fields will be initialized by that
- * function
- */
-extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
-                            unsigned int data_len,
-                            void (*done)(struct smu_cmd *cmd, void *misc),
-                            void *misc,
-                            ...);
-
-/*
- * Completion helper. Pass it to smu_queue_simple or as 'done'
- * member to smu_queue_cmd, it will call complete() on the struct
- * completion passed in the "misc" argument
- */
-extern void smu_done_complete(struct smu_cmd *cmd, void *misc);
-
-/*
- * Synchronous helpers. Will spin-wait for completion of a command
- */
-extern void smu_spinwait_cmd(struct smu_cmd *cmd);
-
-static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd)
-{
-        smu_spinwait_cmd(&scmd->cmd);
-}
-
-/*
- * Poll routine to call if blocked with irqs off
- */
-extern void smu_poll(void);
-
-
-/*
- * Init routine, presence check....
- */
-extern int smu_init(void);
-extern int smu_present(void);
-struct of_device;
-extern struct of_device *smu_get_ofdev(void);
-
-
-/*
- * Common command wrappers
- */
-extern void smu_shutdown(void);
-extern void smu_restart(void);
-struct rtc_time;
-extern int smu_get_rtc_time(struct rtc_time *time, int spinwait);
-extern int smu_set_rtc_time(struct rtc_time *time, int spinwait);
-
-/*
- * SMU command buffer absolute address, exported by pmac_setup,
- * this is allocated very early during boot.
- */
-extern unsigned long smu_cmdbuf_abs;
-
-
-/*
- * Kenrel asynchronous i2c interface
- */
-
-#define SMU_I2C_READ_MAX        0x1d
-#define SMU_I2C_WRITE_MAX       0x15
-
-/* SMU i2c header, exactly matches i2c header on wire */
-struct smu_i2c_param
-{
-        u8      bus;            /* SMU bus ID (from device tree) */
-        u8      type;           /* i2c transfer type */
-        u8      devaddr;        /* device address (includes direction) */
-        u8      sublen;         /* subaddress length */
-        u8      subaddr[3];     /* subaddress */
-        u8      caddr;          /* combined address, filled by SMU driver */
-        u8      datalen;        /* length of transfer */
-        u8      data[SMU_I2C_READ_MAX]; /* data */
-};
-
-struct smu_i2c_cmd
-{
-        /* public */
-        struct smu_i2c_param    info;
-        void                    (*done)(struct smu_i2c_cmd *cmd, void *misc);
-        void                    *misc;
-        int                     status; /* 1 = pending, 0 = ok, <0 = fail */
-
-        /* private */
-        struct smu_cmd          scmd;
-        int                     read;
-        int                     stage;
-        int                     retries;
-        u8                      pdata[32];
-        struct list_head        link;
-};
-
-/*
- * Call this to queue an i2c command to the SMU. You must fill info,
- * including info.data for a write, done and misc.
- * For now, no polling interface is provided so you have to use completion
- * callback.
- */
-extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
-
-
-#endif /* __KERNEL__ */
-
-
-/*
- * - SMU "sdb" partitions informations -
- */
-
-
-/*
- * Partition header format
- */
-struct smu_sdbp_header {
-        __u8    id;
-        __u8    len;
-        __u8    version;
-        __u8    flags;
-};
-
-
- /*
- * demangle 16 and 32 bits integer in some SMU partitions
- * (currently, afaik, this concerns only the FVT partition
- * (0x12)
- */
-#define SMU_U16_MIX(x)  le16_to_cpu(x);
-#define SMU_U32_MIX(x)  ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8))
-
-
-/* This is the definition of the SMU sdb-partition-0x12 table (called
- * CPU F/V/T operating points in Darwin). The definition for all those
- * SMU tables should be moved to some separate file
- */
-#define SMU_SDB_FVT_ID                  0x12
-
-struct smu_sdbp_fvt {
-        __u32   sysclk;                 /* Base SysClk frequency in Hz for
-                                         * this operating point. Value need to
-                                         * be unmixed with SMU_U32_MIX()
-                                         */
-        __u8    pad;
-        __u8    maxtemp;                /* Max temp. supported by this
-                                         * operating point
-                                         */
-
-        __u16   volts[3];               /* CPU core voltage for the 3
-                                         * PowerTune modes, a mode with
-                                         * 0V = not supported. Value need
-                                         * to be unmixed with SMU_U16_MIX()
-                                         */
-};
-
-/* This partition contains voltage & current sensor calibration
- * informations
- */
-#define SMU_SDB_CPUVCP_ID               0x21
-
-struct smu_sdbp_cpuvcp {
-        __u16   volt_scale;             /* u4.12 fixed point */
-        __s16   volt_offset;            /* s4.12 fixed point */
-        __u16   curr_scale;             /* u4.12 fixed point */
-        __s16   curr_offset;            /* s4.12 fixed point */
-        __s32   power_quads[3];         /* s4.28 fixed point */
-};
-
-/* This partition contains CPU thermal diode calibration
- */
-#define SMU_SDB_CPUDIODE_ID             0x18
-
-struct smu_sdbp_cpudiode {
-        __u16   m_value;                /* u1.15 fixed point */
-        __s16   b_value;                /* s10.6 fixed point */
-
-};
-
-/* This partition contains Slots power calibration
- */
-#define SMU_SDB_SLOTSPOW_ID             0x78
-
-struct smu_sdbp_slotspow {
-        __u16   pow_scale;              /* u4.12 fixed point */
-        __s16   pow_offset;             /* s4.12 fixed point */
-};
-
-/* This partition contains machine specific version information about
- * the sensor/control layout
- */
-#define SMU_SDB_SENSORTREE_ID           0x25
-
-struct smu_sdbp_sensortree {
-        __u8    model_id;
-        __u8    unknown[3];
-};
-
-/* This partition contains CPU thermal control PID informations. So far
- * only single CPU machines have been seen with an SMU, so we assume this
- * carries only informations for those
- */
-#define SMU_SDB_CPUPIDDATA_ID           0x17
-
-struct smu_sdbp_cpupiddata {
-        __u8    unknown1;
-        __u8    target_temp_delta;
-        __u8    unknown2;
-        __u8    history_len;
-        __s16   power_adj;
-        __u16   max_power;
-        __s32   gp,gr,gd;
-};
-
-
-/* Other partitions without known structures */
-#define SMU_SDB_DEBUG_SWITCHES_ID       0x05
-
-#ifdef __KERNEL__
-/*
- * This returns the pointer to an SMU "sdb" partition data or NULL
- * if not found. The data format is described below
- */
-extern const struct smu_sdbp_header *smu_get_sdb_partition(int id,
-                                        unsigned int *size);
-
-/* Get "sdb" partition data from an SMU satellite */
-extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id,
-                                        int id, unsigned int *size);
-
-
-#endif /* __KERNEL__ */
-
-
-/*
- * - Userland interface -
- */
-
-/*
- * A given instance of the device can be configured for 2 different
- * things at the moment:
- *
- *  - sending SMU commands (default at open() time)
- *  - receiving SMU events (not yet implemented)
- *
- * Commands are written with write() of a command block. They can be
- * "driver" commands (for example to switch to event reception mode)
- * or real SMU commands. They are made of a header followed by command
- * data if any.
- *
- * For SMU commands (not for driver commands), you can then read() back
- * a reply. The reader will be blocked or not depending on how the device
- * file is opened. poll() isn't implemented yet. The reply will consist
- * of a header as well, followed by the reply data if any. You should
- * always provide a buffer large enough for the maximum reply data, I
- * recommand one page.
- *
- * It is illegal to send SMU commands through a file descriptor configured
- * for events reception
- *
- */
-struct smu_user_cmd_hdr
-{
-        __u32           cmdtype;
-#define SMU_CMDTYPE_SMU                 0       /* SMU command */
-#define SMU_CMDTYPE_WANTS_EVENTS        1       /* switch fd to events mode */
-#define SMU_CMDTYPE_GET_PARTITION       2       /* retrieve an sdb partition */
-
-        __u8            cmd;                    /* SMU command byte */
-        __u8            pad[3];                 /* padding */
-        __u32           data_len;               /* Length of data following */
-};
-
-struct smu_user_reply_hdr
-{
-        __u32           status;                 /* Command status */
-        __u32           reply_len;              /* Length of data follwing */
-};
-
-#endif /*  _SMU_H */
diff --git a/include/asm-powerpc/socket.h b/include/asm-powerpc/socket.h
deleted file mode 100644
index f5a4e168e498..000000000000
--- a/include/asm-powerpc/socket.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef _ASM_POWERPC_SOCKET_H
-#define _ASM_POWERPC_SOCKET_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET      1
-
-#define SO_DEBUG        1
-#define SO_REUSEADDR    2
-#define SO_TYPE         3
-#define SO_ERROR        4
-#define SO_DONTROUTE    5
-#define SO_BROADCAST    6
-#define SO_SNDBUF       7
-#define SO_RCVBUF       8
-#define SO_SNDBUFFORCE  32
-#define SO_RCVBUFFORCE  33
-#define SO_KEEPALIVE    9
-#define SO_OOBINLINE    10
-#define SO_NO_CHECK     11
-#define SO_PRIORITY     12
-#define SO_LINGER       13
-#define SO_BSDCOMPAT    14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_RCVLOWAT     16
-#define SO_SNDLOWAT     17
-#define SO_RCVTIMEO     18
-#define SO_SNDTIMEO     19
-#define SO_PASSCRED     20
-#define SO_PEERCRED     21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION              22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT        23
-#define SO_SECURITY_ENCRYPTION_NETWORK          24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP            29
-#define SCM_TIMESTAMP           SO_TIMESTAMP
-
-#define SO_ACCEPTCONN           30
-
-#define SO_PEERSEC              31
-#define SO_PASSSEC              34
-#define SO_TIMESTAMPNS          35
-#define SCM_TIMESTAMPNS         SO_TIMESTAMPNS
-
-#define SO_MARK                 36
-
-#endif  /* _ASM_POWERPC_SOCKET_H */
diff --git a/include/asm-powerpc/sockios.h b/include/asm-powerpc/sockios.h
deleted file mode 100644
index 55cef7675a31..000000000000
--- a/include/asm-powerpc/sockios.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_SOCKIOS_H
-#define _ASM_POWERPC_SOCKIOS_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN       0x8901
-#define SIOCSPGRP       0x8902
-#define FIOGETOWN       0x8903
-#define SIOCGPGRP       0x8904
-#define SIOCATMARK      0x8905
-#define SIOCGSTAMP      0x8906          /* Get stamp (timeval) */
-#define SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
-
-#endif  /* _ASM_POWERPC_SOCKIOS_H */
diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h
deleted file mode 100644
index 54a47ea2c3aa..000000000000
--- a/include/asm-powerpc/sparsemem.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _ASM_POWERPC_SPARSEMEM_H
-#define _ASM_POWERPC_SPARSEMEM_H 1
-#ifdef __KERNEL__
-
-#ifdef CONFIG_SPARSEMEM
-/*
- * SECTION_SIZE_BITS            2^N: how big each section will be
- * MAX_PHYSADDR_BITS            2^N: how much physical address space we have
- * MAX_PHYSMEM_BITS             2^N: how much memory we can have in that space
- */
-#define SECTION_SIZE_BITS       24
-
-#define MAX_PHYSADDR_BITS       44
-#define MAX_PHYSMEM_BITS        44
-
-#endif /* CONFIG_SPARSEMEM */
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-extern void create_section_mapping(unsigned long start, unsigned long end);
-extern int remove_section_mapping(unsigned long start, unsigned long end);
-#ifdef CONFIG_NUMA
-extern int hot_add_scn_to_nid(unsigned long scn_addr);
-#else
-static inline int hot_add_scn_to_nid(unsigned long scn_addr)
-{
-        return 0;
-}
-#endif /* CONFIG_NUMA */
-#endif /* CONFIG_MEMORY_HOTPLUG */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h
deleted file mode 100644
index f56a843f4705..000000000000
--- a/include/asm-powerpc/spinlock.h
+++ /dev/null
@@ -1,295 +0,0 @@
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-#ifdef __KERNEL__
-
-/*
- * Simple spin lock operations.  
- *
- * Copyright (C) 2001-2004 Paul Mackerras <paulus@au.ibm.com>, IBM
- * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
- * Copyright (C) 2002 Dave Engebretsen <engebret@us.ibm.com>, IBM
- *      Rework to support virtual processors
- *
- * Type of int is used as a full 64b word is not necessary.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * (the type definitions are in asm/spinlock_types.h)
- */
-#include <linux/irqflags.h>
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-#include <asm/hvcall.h>
-#include <asm/iseries/hv_call.h>
-#endif
-#include <asm/asm-compat.h>
-#include <asm/synch.h>
-
-#define __raw_spin_is_locked(x)         ((x)->slock != 0)
-
-#ifdef CONFIG_PPC64
-/* use 0x800000yy when locked, where yy == CPU number */
-#define LOCK_TOKEN      (*(u32 *)(&get_paca()->lock_token))
-#else
-#define LOCK_TOKEN      1
-#endif
-
-#if defined(CONFIG_PPC64) && defined(CONFIG_SMP)
-#define CLEAR_IO_SYNC   (get_paca()->io_sync = 0)
-#define SYNC_IO         do {                                            \
-                                if (unlikely(get_paca()->io_sync)) {    \
-                                        mb();                           \
-                                        get_paca()->io_sync = 0;        \
-                                }                                       \
-                        } while (0)
-#else
-#define CLEAR_IO_SYNC
-#define SYNC_IO
-#endif
-
-/*
- * This returns the old value in the lock, so we succeeded
- * in getting the lock if the return value is 0.
- */
-static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
-{
-        unsigned long tmp, token;
-
-        token = LOCK_TOKEN;
-        __asm__ __volatile__(
-"1:     lwarx           %0,0,%2\n\
-        cmpwi           0,%0,0\n\
-        bne-            2f\n\
-        stwcx.          %1,0,%2\n\
-        bne-            1b\n\
-        isync\n\
-2:"     : "=&r" (tmp)
-        : "r" (token), "r" (&lock->slock)
-        : "cr0", "memory");
-
-        return tmp;
-}
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
-        CLEAR_IO_SYNC;
-        return __spin_trylock(lock) == 0;
-}
-
-/*
- * On a system with shared processors (that is, where a physical
- * processor is multiplexed between several virtual processors),
- * there is no point spinning on a lock if the holder of the lock
- * isn't currently scheduled on a physical processor.  Instead
- * we detect this situation and ask the hypervisor to give the
- * rest of our timeslice to the lock holder.
- *
- * So that we can tell which virtual processor is holding a lock,
- * we put 0x80000000 | smp_processor_id() in the lock when it is
- * held.  Conveniently, we have a word in the paca that holds this
- * value.
- */
-
-#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
-/* We only yield to the hypervisor if we are in shared processor mode */
-#define SHARED_PROCESSOR (get_lppaca()->shared_proc)
-extern void __spin_yield(raw_spinlock_t *lock);
-extern void __rw_yield(raw_rwlock_t *lock);
-#else /* SPLPAR || ISERIES */
-#define __spin_yield(x) barrier()
-#define __rw_yield(x)   barrier()
-#define SHARED_PROCESSOR        0
-#endif
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
-        CLEAR_IO_SYNC;
-        while (1) {
-                if (likely(__spin_trylock(lock) == 0))
-                        break;
-                do {
-                        HMT_low();
-                        if (SHARED_PROCESSOR)
-                                __spin_yield(lock);
-                } while (unlikely(lock->slock != 0));
-                HMT_medium();
-        }
-}
-
-static inline
-void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
-{
-        unsigned long flags_dis;
-
-        CLEAR_IO_SYNC;
-        while (1) {
-                if (likely(__spin_trylock(lock) == 0))
-                        break;
-                local_save_flags(flags_dis);
-                local_irq_restore(flags);
-                do {
-                        HMT_low();
-                        if (SHARED_PROCESSOR)
-                                __spin_yield(lock);
-                } while (unlikely(lock->slock != 0));
-                HMT_medium();
-                local_irq_restore(flags_dis);
-        }
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
-        SYNC_IO;
-        __asm__ __volatile__("# __raw_spin_unlock\n\t"
-                                LWSYNC_ON_SMP: : :"memory");
-        lock->slock = 0;
-}
-
-#ifdef CONFIG_PPC64
-extern void __raw_spin_unlock_wait(raw_spinlock_t *lock);
-#else
-#define __raw_spin_unlock_wait(lock) \
-        do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
-#endif
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-#define __raw_read_can_lock(rw)         ((rw)->lock >= 0)
-#define __raw_write_can_lock(rw)        (!(rw)->lock)
-
-#ifdef CONFIG_PPC64
-#define __DO_SIGN_EXTEND        "extsw  %0,%0\n"
-#define WRLOCK_TOKEN            LOCK_TOKEN      /* it's negative */
-#else
-#define __DO_SIGN_EXTEND
-#define WRLOCK_TOKEN            (-1)
-#endif
-
-/*
- * This returns the old value in the lock + 1,
- * so we got a read lock if the return value is > 0.
- */
-static inline long __read_trylock(raw_rwlock_t *rw)
-{
-        long tmp;
-
-        __asm__ __volatile__(
-"1:     lwarx           %0,0,%1\n"
-        __DO_SIGN_EXTEND
-"       addic.          %0,%0,1\n\
-        ble-            2f\n"
-        PPC405_ERR77(0,%1)
-"       stwcx.          %0,0,%1\n\
-        bne-            1b\n\
-        isync\n\
-2:"     : "=&r" (tmp)
-        : "r" (&rw->lock)
-        : "cr0", "xer", "memory");
-
-        return tmp;
-}
-
-/*
- * This returns the old value in the lock,
- * so we got the write lock if the return value is 0.
- */
-static inline long __write_trylock(raw_rwlock_t *rw)
-{
-        long tmp, token;
-
-        token = WRLOCK_TOKEN;
-        __asm__ __volatile__(
-"1:     lwarx           %0,0,%2\n\
-        cmpwi           0,%0,0\n\
-        bne-            2f\n"
-        PPC405_ERR77(0,%1)
-"       stwcx.          %1,0,%2\n\
-        bne-            1b\n\
-        isync\n\
-2:"     : "=&r" (tmp)
-        : "r" (token), "r" (&rw->lock)
-        : "cr0", "memory");
-
-        return tmp;
-}
-
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
-        while (1) {
-                if (likely(__read_trylock(rw) > 0))
-                        break;
-                do {
-                        HMT_low();
-                        if (SHARED_PROCESSOR)
-                                __rw_yield(rw);
-                } while (unlikely(rw->lock < 0));
-                HMT_medium();
-        }
-}
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
-        while (1) {
-                if (likely(__write_trylock(rw) == 0))
-                        break;
-                do {
-                        HMT_low();
-                        if (SHARED_PROCESSOR)
-                                __rw_yield(rw);
-                } while (unlikely(rw->lock != 0));
-                HMT_medium();
-        }
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *rw)
-{
-        return __read_trylock(rw) > 0;
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *rw)
-{
-        return __write_trylock(rw) == 0;
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
-        long tmp;
-
-        __asm__ __volatile__(
-        "# read_unlock\n\t"
-        LWSYNC_ON_SMP
-"1:     lwarx           %0,0,%1\n\
-        addic           %0,%0,-1\n"
-        PPC405_ERR77(0,%1)
-"       stwcx.          %0,0,%1\n\
-        bne-            1b"
-        : "=&r"(tmp)
-        : "r"(&rw->lock)
-        : "cr0", "memory");
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
-        __asm__ __volatile__("# write_unlock\n\t"
-                                LWSYNC_ON_SMP: : :"memory");
-        rw->lock = 0;
-}
-
-#define _raw_spin_relax(lock)   __spin_yield(lock)
-#define _raw_read_relax(lock)   __rw_yield(lock)
-#define _raw_write_relax(lock)  __rw_yield(lock)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-powerpc/spinlock_types.h b/include/asm-powerpc/spinlock_types.h
deleted file mode 100644
index 74236c9f05b1..000000000000
--- a/include/asm-powerpc/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H
-#define _ASM_POWERPC_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-        volatile unsigned int slock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED        { 0 }
-
-typedef struct {
-        volatile signed int lock;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED          { 0 }
-
-#endif
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
deleted file mode 100644
index 8b2eb044270a..000000000000
--- a/include/asm-powerpc/spu.h
+++ /dev/null
@@ -1,732 +0,0 @@
-/*
- * SPU core / file system interface and HW structures
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
- *
- * Author: Arnd Bergmann <arndb@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SPU_H
-#define _SPU_H
-#ifdef __KERNEL__
-
-#include <linux/workqueue.h>
-#include <linux/sysdev.h>
-
-#define LS_SIZE (256 * 1024)
-#define LS_ADDR_MASK (LS_SIZE - 1)
-
-#define MFC_PUT_CMD             0x20
-#define MFC_PUTS_CMD            0x28
-#define MFC_PUTR_CMD            0x30
-#define MFC_PUTF_CMD            0x22
-#define MFC_PUTB_CMD            0x21
-#define MFC_PUTFS_CMD           0x2A
-#define MFC_PUTBS_CMD           0x29
-#define MFC_PUTRF_CMD           0x32
-#define MFC_PUTRB_CMD           0x31
-#define MFC_PUTL_CMD            0x24
-#define MFC_PUTRL_CMD           0x34
-#define MFC_PUTLF_CMD           0x26
-#define MFC_PUTLB_CMD           0x25
-#define MFC_PUTRLF_CMD          0x36
-#define MFC_PUTRLB_CMD          0x35
-
-#define MFC_GET_CMD             0x40
-#define MFC_GETS_CMD            0x48
-#define MFC_GETF_CMD            0x42
-#define MFC_GETB_CMD            0x41
-#define MFC_GETFS_CMD           0x4A
-#define MFC_GETBS_CMD           0x49
-#define MFC_GETL_CMD            0x44
-#define MFC_GETLF_CMD           0x46
-#define MFC_GETLB_CMD           0x45
-
-#define MFC_SDCRT_CMD           0x80
-#define MFC_SDCRTST_CMD         0x81
-#define MFC_SDCRZ_CMD           0x89
-#define MFC_SDCRS_CMD           0x8D
-#define MFC_SDCRF_CMD           0x8F
-
-#define MFC_GETLLAR_CMD         0xD0
-#define MFC_PUTLLC_CMD          0xB4
-#define MFC_PUTLLUC_CMD         0xB0
-#define MFC_PUTQLLUC_CMD        0xB8
-#define MFC_SNDSIG_CMD          0xA0
-#define MFC_SNDSIGB_CMD         0xA1
-#define MFC_SNDSIGF_CMD         0xA2
-#define MFC_BARRIER_CMD         0xC0
-#define MFC_EIEIO_CMD           0xC8
-#define MFC_SYNC_CMD            0xCC
-
-#define MFC_MIN_DMA_SIZE_SHIFT  4       /* 16 bytes */
-#define MFC_MAX_DMA_SIZE_SHIFT  14      /* 16384 bytes */
-#define MFC_MIN_DMA_SIZE        (1 << MFC_MIN_DMA_SIZE_SHIFT)
-#define MFC_MAX_DMA_SIZE        (1 << MFC_MAX_DMA_SIZE_SHIFT)
-#define MFC_MIN_DMA_SIZE_MASK   (MFC_MIN_DMA_SIZE - 1)
-#define MFC_MAX_DMA_SIZE_MASK   (MFC_MAX_DMA_SIZE - 1)
-#define MFC_MIN_DMA_LIST_SIZE   0x0008  /*   8 bytes */
-#define MFC_MAX_DMA_LIST_SIZE   0x4000  /* 16K bytes */
-
-#define MFC_TAGID_TO_TAGMASK(tag_id)  (1 << (tag_id & 0x1F))
-
-/* Events for Channels 0-2 */
-#define MFC_DMA_TAG_STATUS_UPDATE_EVENT     0x00000001
-#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT  0x00000002
-#define MFC_DMA_QUEUE_AVAILABLE_EVENT       0x00000008
-#define MFC_SPU_MAILBOX_WRITTEN_EVENT       0x00000010
-#define MFC_DECREMENTER_EVENT               0x00000020
-#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT  0x00000040
-#define MFC_PU_MAILBOX_AVAILABLE_EVENT      0x00000080
-#define MFC_SIGNAL_2_EVENT                  0x00000100
-#define MFC_SIGNAL_1_EVENT                  0x00000200
-#define MFC_LLR_LOST_EVENT                  0x00000400
-#define MFC_PRIV_ATTN_EVENT                 0x00000800
-#define MFC_MULTI_SRC_EVENT                 0x00001000
-
-/* Flag indicating progress during context switch. */
-#define SPU_CONTEXT_SWITCH_PENDING      0UL
-#define SPU_CONTEXT_FAULT_PENDING       1UL
-
-struct spu_context;
-struct spu_runqueue;
-struct spu_lscsa;
-struct device_node;
-
-enum spu_utilization_state {
-        SPU_UTIL_USER,
-        SPU_UTIL_SYSTEM,
-        SPU_UTIL_IOWAIT,
-        SPU_UTIL_IDLE_LOADED,
-        SPU_UTIL_MAX
-};
-
-struct spu {
-        const char *name;
-        unsigned long local_store_phys;
-        u8 *local_store;
-        unsigned long problem_phys;
-        struct spu_problem __iomem *problem;
-        struct spu_priv2 __iomem *priv2;
-        struct list_head cbe_list;
-        struct list_head full_list;
-        enum { SPU_FREE, SPU_USED } alloc_state;
-        int number;
-        unsigned int irqs[3];
-        u32 node;
-        u64 flags;
-        u64 class_0_pending;
-        u64 class_0_dar;
-        u64 class_1_dar;
-        u64 class_1_dsisr;
-        size_t ls_size;
-        unsigned int slb_replace;
-        struct mm_struct *mm;
-        struct spu_context *ctx;
-        struct spu_runqueue *rq;
-        unsigned long long timestamp;
-        pid_t pid;
-        pid_t tgid;
-        spinlock_t register_lock;
-
-        void (* wbox_callback)(struct spu *spu);
-        void (* ibox_callback)(struct spu *spu);
-        void (* stop_callback)(struct spu *spu, int irq);
-        void (* mfc_callback)(struct spu *spu);
-
-        char irq_c0[8];
-        char irq_c1[8];
-        char irq_c2[8];
-
-        u64 spe_id;
-
-        void* pdata; /* platform private data */
-
-        /* of based platforms only */
-        struct device_node *devnode;
-
-        /* native only */
-        struct spu_priv1 __iomem *priv1;
-
-        /* beat only */
-        u64 shadow_int_mask_RW[3];
-
-        struct sys_device sysdev;
-
-        int has_mem_affinity;
-        struct list_head aff_list;
-
-        struct {
-                /* protected by interrupt reentrancy */
-                enum spu_utilization_state util_state;
-                unsigned long long tstamp;
-                unsigned long long times[SPU_UTIL_MAX];
-                unsigned long long vol_ctx_switch;
-                unsigned long long invol_ctx_switch;
-                unsigned long long min_flt;
-                unsigned long long maj_flt;
-                unsigned long long hash_flt;
-                unsigned long long slb_flt;
-                unsigned long long class2_intr;
-                unsigned long long libassist;
-        } stats;
-};
-
-struct cbe_spu_info {
-        struct mutex list_mutex;
-        struct list_head spus;
-        int n_spus;
-        int nr_active;
-        atomic_t busy_spus;
-        atomic_t reserved_spus;
-};
-
-extern struct cbe_spu_info cbe_spu_info[];
-
-void spu_init_channels(struct spu *spu);
-void spu_irq_setaffinity(struct spu *spu, int cpu);
-
-void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
-                void *code, int code_size);
-
-#ifdef CONFIG_KEXEC
-void crash_register_spus(struct list_head *list);
-#else
-static inline void crash_register_spus(struct list_head *list)
-{
-}
-#endif
-
-extern void spu_invalidate_slbs(struct spu *spu);
-extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm);
-int spu_64k_pages_available(void);
-
-/* Calls from the memory management to the SPU */
-struct mm_struct;
-extern void spu_flush_all_slbs(struct mm_struct *mm);
-
-/* This interface allows a profiler (e.g., OProfile) to store a ref
- * to spu context information that it creates.  This caching technique
- * avoids the need to recreate this information after a save/restore operation.
- *
- * Assumes the caller has already incremented the ref count to
- * profile_info; then spu_context_destroy must call kref_put
- * on prof_info_kref.
- */
-void spu_set_profile_private_kref(struct spu_context *ctx,
-                                  struct kref *prof_info_kref,
-                                  void ( * prof_info_release) (struct kref *kref));
-
-void *spu_get_profile_private_kref(struct spu_context *ctx);
-
-/* system callbacks from the SPU */
-struct spu_syscall_block {
-        u64 nr_ret;
-        u64 parm[6];
-};
-extern long spu_sys_callback(struct spu_syscall_block *s);
-
-/* syscalls implemented in spufs */
-struct file;
-struct spufs_calls {
-        long (*create_thread)(const char __user *name,
-                                        unsigned int flags, mode_t mode,
-                                        struct file *neighbor);
-        long (*spu_run)(struct file *filp, __u32 __user *unpc,
-                                                __u32 __user *ustatus);
-        int (*coredump_extra_notes_size)(void);
-        int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset);
-        void (*notify_spus_active)(void);
-        struct module *owner;
-};
-
-/* return status from spu_run, same as in libspe */
-#define SPE_EVENT_DMA_ALIGNMENT         0x0008  /*A DMA alignment error */
-#define SPE_EVENT_SPE_ERROR             0x0010  /*An illegal instruction error*/
-#define SPE_EVENT_SPE_DATA_SEGMENT      0x0020  /*A DMA segmentation error    */
-#define SPE_EVENT_SPE_DATA_STORAGE      0x0040  /*A DMA storage error */
-#define SPE_EVENT_INVALID_DMA           0x0800  /* Invalid MFC DMA */
-
-/*
- * Flags for sys_spu_create.
- */
-#define SPU_CREATE_EVENTS_ENABLED       0x0001
-#define SPU_CREATE_GANG                 0x0002
-#define SPU_CREATE_NOSCHED              0x0004
-#define SPU_CREATE_ISOLATE              0x0008
-#define SPU_CREATE_AFFINITY_SPU         0x0010
-#define SPU_CREATE_AFFINITY_MEM         0x0020
-
-#define SPU_CREATE_FLAG_ALL             0x003f /* mask of all valid flags */
-
-
-int register_spu_syscalls(struct spufs_calls *calls);
-void unregister_spu_syscalls(struct spufs_calls *calls);
-
-int spu_add_sysdev_attr(struct sysdev_attribute *attr);
-void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
-
-int spu_add_sysdev_attr_group(struct attribute_group *attrs);
-void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
-
-int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
-                unsigned long dsisr, unsigned *flt);
-
-/*
- * Notifier blocks:
- *
- * oprofile can get notified when a context switch is performed
- * on an spe. The notifer function that gets called is passed
- * a pointer to the SPU structure as well as the object-id that
- * identifies the binary running on that SPU now.
- *
- * For a context save, the object-id that is passed is zero,
- * identifying that the kernel will run from that moment on.
- *
- * For a context restore, the object-id is the value written
- * to object-id spufs file from user space and the notifer
- * function can assume that spu->ctx is valid.
- */
-struct notifier_block;
-int spu_switch_event_register(struct notifier_block * n);
-int spu_switch_event_unregister(struct notifier_block * n);
-
-extern void notify_spus_active(void);
-extern void do_notify_spus_active(void);
-
-/*
- * This defines the Local Store, Problem Area and Privilege Area of an SPU.
- */
-
-union mfc_tag_size_class_cmd {
-        struct {
-                u16 mfc_size;
-                u16 mfc_tag;
-                u8  pad;
-                u8  mfc_rclassid;
-                u16 mfc_cmd;
-        } u;
-        struct {
-                u32 mfc_size_tag32;
-                u32 mfc_class_cmd32;
-        } by32;
-        u64 all64;
-};
-
-struct mfc_cq_sr {
-        u64 mfc_cq_data0_RW;
-        u64 mfc_cq_data1_RW;
-        u64 mfc_cq_data2_RW;
-        u64 mfc_cq_data3_RW;
-};
-
-struct spu_problem {
-#define MS_SYNC_PENDING         1L
-        u64 spc_mssync_RW;                                      /* 0x0000 */
-        u8  pad_0x0008_0x3000[0x3000 - 0x0008];
-
-        /* DMA Area */
-        u8  pad_0x3000_0x3004[0x4];                             /* 0x3000 */
-        u32 mfc_lsa_W;                                          /* 0x3004 */
-        u64 mfc_ea_W;                                           /* 0x3008 */
-        union mfc_tag_size_class_cmd mfc_union_W;                       /* 0x3010 */
-        u8  pad_0x3018_0x3104[0xec];                            /* 0x3018 */
-        u32 dma_qstatus_R;                                      /* 0x3104 */
-        u8  pad_0x3108_0x3204[0xfc];                            /* 0x3108 */
-        u32 dma_querytype_RW;                                   /* 0x3204 */
-        u8  pad_0x3208_0x321c[0x14];                            /* 0x3208 */
-        u32 dma_querymask_RW;                                   /* 0x321c */
-        u8  pad_0x3220_0x322c[0xc];                             /* 0x3220 */
-        u32 dma_tagstatus_R;                                    /* 0x322c */
-#define DMA_TAGSTATUS_INTR_ANY  1u
-#define DMA_TAGSTATUS_INTR_ALL  2u
-        u8  pad_0x3230_0x4000[0x4000 - 0x3230];                 /* 0x3230 */
-
-        /* SPU Control Area */
-        u8  pad_0x4000_0x4004[0x4];                             /* 0x4000 */
-        u32 pu_mb_R;                                            /* 0x4004 */
-        u8  pad_0x4008_0x400c[0x4];                             /* 0x4008 */
-        u32 spu_mb_W;                                           /* 0x400c */
-        u8  pad_0x4010_0x4014[0x4];                             /* 0x4010 */
-        u32 mb_stat_R;                                          /* 0x4014 */
-        u8  pad_0x4018_0x401c[0x4];                             /* 0x4018 */
-        u32 spu_runcntl_RW;                                     /* 0x401c */
-#define SPU_RUNCNTL_STOP        0L
-#define SPU_RUNCNTL_RUNNABLE    1L
-#define SPU_RUNCNTL_ISOLATE     2L
-        u8  pad_0x4020_0x4024[0x4];                             /* 0x4020 */
-        u32 spu_status_R;                                       /* 0x4024 */
-#define SPU_STOP_STATUS_SHIFT           16
-#define SPU_STATUS_STOPPED              0x0
-#define SPU_STATUS_RUNNING              0x1
-#define SPU_STATUS_STOPPED_BY_STOP      0x2
-#define SPU_STATUS_STOPPED_BY_HALT      0x4
-#define SPU_STATUS_WAITING_FOR_CHANNEL  0x8
-#define SPU_STATUS_SINGLE_STEP          0x10
-#define SPU_STATUS_INVALID_INSTR        0x20
-#define SPU_STATUS_INVALID_CH           0x40
-#define SPU_STATUS_ISOLATED_STATE       0x80
-#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200
-#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400
-        u8  pad_0x4028_0x402c[0x4];                             /* 0x4028 */
-        u32 spu_spe_R;                                          /* 0x402c */
-        u8  pad_0x4030_0x4034[0x4];                             /* 0x4030 */
-        u32 spu_npc_RW;                                         /* 0x4034 */
-        u8  pad_0x4038_0x14000[0x14000 - 0x4038];               /* 0x4038 */
-
-        /* Signal Notification Area */
-        u8  pad_0x14000_0x1400c[0xc];                           /* 0x14000 */
-        u32 signal_notify1;                                     /* 0x1400c */
-        u8  pad_0x14010_0x1c00c[0x7ffc];                        /* 0x14010 */
-        u32 signal_notify2;                                     /* 0x1c00c */
-} __attribute__ ((aligned(0x20000)));
-
-/* SPU Privilege 2 State Area */
-struct spu_priv2 {
-        /* MFC Registers */
-        u8  pad_0x0000_0x1100[0x1100 - 0x0000];                 /* 0x0000 */
-
-        /* SLB Management Registers */
-        u8  pad_0x1100_0x1108[0x8];                             /* 0x1100 */
-        u64 slb_index_W;                                        /* 0x1108 */
-#define SLB_INDEX_MASK                          0x7L
-        u64 slb_esid_RW;                                        /* 0x1110 */
-        u64 slb_vsid_RW;                                        /* 0x1118 */
-#define SLB_VSID_SUPERVISOR_STATE       (0x1ull << 11)
-#define SLB_VSID_SUPERVISOR_STATE_MASK  (0x1ull << 11)
-#define SLB_VSID_PROBLEM_STATE          (0x1ull << 10)
-#define SLB_VSID_PROBLEM_STATE_MASK     (0x1ull << 10)
-#define SLB_VSID_EXECUTE_SEGMENT        (0x1ull << 9)
-#define SLB_VSID_NO_EXECUTE_SEGMENT     (0x1ull << 9)
-#define SLB_VSID_EXECUTE_SEGMENT_MASK   (0x1ull << 9)
-#define SLB_VSID_4K_PAGE                (0x0 << 8)
-#define SLB_VSID_LARGE_PAGE             (0x1ull << 8)
-#define SLB_VSID_PAGE_SIZE_MASK         (0x1ull << 8)
-#define SLB_VSID_CLASS_MASK             (0x1ull << 7)
-#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK (0x1ull << 6)
-        u64 slb_invalidate_entry_W;                             /* 0x1120 */
-        u64 slb_invalidate_all_W;                               /* 0x1128 */
-        u8  pad_0x1130_0x2000[0x2000 - 0x1130];                 /* 0x1130 */
-
-        /* Context Save / Restore Area */
-        struct mfc_cq_sr spuq[16];                              /* 0x2000 */
-        struct mfc_cq_sr puq[8];                                /* 0x2200 */
-        u8  pad_0x2300_0x3000[0x3000 - 0x2300];                 /* 0x2300 */
-
-        /* MFC Control */
-        u64 mfc_control_RW;                                     /* 0x3000 */
-#define MFC_CNTL_RESUME_DMA_QUEUE               (0ull << 0)
-#define MFC_CNTL_SUSPEND_DMA_QUEUE              (1ull << 0)
-#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK         (1ull << 0)
-#define MFC_CNTL_SUSPEND_MASK                   (1ull << 4)
-#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION     (0ull << 8)
-#define MFC_CNTL_SUSPEND_IN_PROGRESS            (1ull << 8)
-#define MFC_CNTL_SUSPEND_COMPLETE               (3ull << 8)
-#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK        (3ull << 8)
-#define MFC_CNTL_DMA_QUEUES_EMPTY               (1ull << 14)
-#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK          (1ull << 14)
-#define MFC_CNTL_PURGE_DMA_REQUEST              (1ull << 15)
-#define MFC_CNTL_PURGE_DMA_IN_PROGRESS          (1ull << 24)
-#define MFC_CNTL_PURGE_DMA_COMPLETE             (3ull << 24)
-#define MFC_CNTL_PURGE_DMA_STATUS_MASK          (3ull << 24)
-#define MFC_CNTL_RESTART_DMA_COMMAND            (1ull << 32)
-#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING    (1ull << 32)
-#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32)
-#define MFC_CNTL_MFC_PRIVILEGE_STATE            (2ull << 33)
-#define MFC_CNTL_MFC_PROBLEM_STATE              (3ull << 33)
-#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK  (3ull << 33)
-#define MFC_CNTL_DECREMENTER_HALTED             (1ull << 35)
-#define MFC_CNTL_DECREMENTER_RUNNING            (1ull << 40)
-#define MFC_CNTL_DECREMENTER_STATUS_MASK        (1ull << 40)
-        u8  pad_0x3008_0x4000[0x4000 - 0x3008];                 /* 0x3008 */
-
-        /* Interrupt Mailbox */
-        u64 puint_mb_R;                                         /* 0x4000 */
-        u8  pad_0x4008_0x4040[0x4040 - 0x4008];                 /* 0x4008 */
-
-        /* SPU Control */
-        u64 spu_privcntl_RW;                                    /* 0x4040 */
-#define SPU_PRIVCNTL_MODE_NORMAL                (0x0ull << 0)
-#define SPU_PRIVCNTL_MODE_SINGLE_STEP           (0x1ull << 0)
-#define SPU_PRIVCNTL_MODE_MASK                  (0x1ull << 0)
-#define SPU_PRIVCNTL_NO_ATTENTION_EVENT         (0x0ull << 1)
-#define SPU_PRIVCNTL_ATTENTION_EVENT            (0x1ull << 1)
-#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK       (0x1ull << 1)
-#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL         (0x0ull << 2)
-#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK    (0x1ull << 2)
-        u8  pad_0x4048_0x4058[0x10];                            /* 0x4048 */
-        u64 spu_lslr_RW;                                        /* 0x4058 */
-        u64 spu_chnlcntptr_RW;                                  /* 0x4060 */
-        u64 spu_chnlcnt_RW;                                     /* 0x4068 */
-        u64 spu_chnldata_RW;                                    /* 0x4070 */
-        u64 spu_cfg_RW;                                         /* 0x4078 */
-        u8  pad_0x4080_0x5000[0x5000 - 0x4080];                 /* 0x4080 */
-
-        /* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */
-        u64 spu_pm_trace_tag_status_RW;                         /* 0x5000 */
-        u64 spu_tag_status_query_RW;                            /* 0x5008 */
-#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32)
-#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull)
-        u64 spu_cmd_buf1_RW;                                    /* 0x5010 */
-#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32)
-#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull)
-        u64 spu_cmd_buf2_RW;                                    /* 0x5018 */
-#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32)
-#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16)
-#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full)
-        u64 spu_atomic_status_RW;                               /* 0x5020 */
-} __attribute__ ((aligned(0x20000)));
-
-/* SPU Privilege 1 State Area */
-struct spu_priv1 {
-        /* Control and Configuration Area */
-        u64 mfc_sr1_RW;                                         /* 0x000 */
-#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK    0x01ull
-#define MFC_STATE1_BUS_TLBIE_MASK               0x02ull
-#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK 0x04ull
-#define MFC_STATE1_PROBLEM_STATE_MASK           0x08ull
-#define MFC_STATE1_RELOCATE_MASK                0x10ull
-#define MFC_STATE1_MASTER_RUN_CONTROL_MASK      0x20ull
-#define MFC_STATE1_TABLE_SEARCH_MASK            0x40ull
-        u64 mfc_lpid_RW;                                        /* 0x008 */
-        u64 spu_idr_RW;                                         /* 0x010 */
-        u64 mfc_vr_RO;                                          /* 0x018 */
-#define MFC_VERSION_BITS                (0xffff << 16)
-#define MFC_REVISION_BITS               (0xffff)
-#define MFC_GET_VERSION_BITS(vr)        (((vr) & MFC_VERSION_BITS) >> 16)
-#define MFC_GET_REVISION_BITS(vr)       ((vr) & MFC_REVISION_BITS)
-        u64 spu_vr_RO;                                          /* 0x020 */
-#define SPU_VERSION_BITS                (0xffff << 16)
-#define SPU_REVISION_BITS               (0xffff)
-#define SPU_GET_VERSION_BITS(vr)        (vr & SPU_VERSION_BITS) >> 16
-#define SPU_GET_REVISION_BITS(vr)       (vr & SPU_REVISION_BITS)
-        u8  pad_0x28_0x100[0x100 - 0x28];                       /* 0x28 */
-
-        /* Interrupt Area */
-        u64 int_mask_RW[3];                                     /* 0x100 */
-#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR                0x1L
-#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR          0x2L
-#define CLASS0_ENABLE_SPU_ERROR_INTR                    0x4L
-#define CLASS0_ENABLE_MFC_FIR_INTR                      0x8L
-#define CLASS1_ENABLE_SEGMENT_FAULT_INTR                0x1L
-#define CLASS1_ENABLE_STORAGE_FAULT_INTR                0x2L
-#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR    0x4L
-#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR    0x8L
-#define CLASS2_ENABLE_MAILBOX_INTR                      0x1L
-#define CLASS2_ENABLE_SPU_STOP_INTR                     0x2L
-#define CLASS2_ENABLE_SPU_HALT_INTR                     0x4L
-#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR   0x8L
-#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR            0x10L
-        u8  pad_0x118_0x140[0x28];                              /* 0x118 */
-        u64 int_stat_RW[3];                                     /* 0x140 */
-#define CLASS0_DMA_ALIGNMENT_INTR                       0x1L
-#define CLASS0_INVALID_DMA_COMMAND_INTR                 0x2L
-#define CLASS0_SPU_ERROR_INTR                           0x4L
-#define CLASS0_INTR_MASK                                0x7L
-#define CLASS1_SEGMENT_FAULT_INTR                       0x1L
-#define CLASS1_STORAGE_FAULT_INTR                       0x2L
-#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR           0x4L
-#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR           0x8L
-#define CLASS1_INTR_MASK                                0xfL
-#define CLASS2_MAILBOX_INTR                             0x1L
-#define CLASS2_SPU_STOP_INTR                            0x2L
-#define CLASS2_SPU_HALT_INTR                            0x4L
-#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR          0x8L
-#define CLASS2_MAILBOX_THRESHOLD_INTR                   0x10L
-#define CLASS2_INTR_MASK                                0x1fL
-        u8  pad_0x158_0x180[0x28];                              /* 0x158 */
-        u64 int_route_RW;                                       /* 0x180 */
-
-        /* Interrupt Routing */
-        u8  pad_0x188_0x200[0x200 - 0x188];                     /* 0x188 */
-
-        /* Atomic Unit Control Area */
-        u64 mfc_atomic_flush_RW;                                /* 0x200 */
-#define mfc_atomic_flush_enable                 0x1L
-        u8  pad_0x208_0x280[0x78];                              /* 0x208 */
-        u64 resource_allocation_groupID_RW;                     /* 0x280 */
-        u64 resource_allocation_enable_RW;                      /* 0x288 */
-        u8  pad_0x290_0x3c8[0x3c8 - 0x290];                     /* 0x290 */
-
-        /* SPU_Cache_ImplRegs: Implementation-dependent cache registers */
-
-        u64 smf_sbi_signal_sel;                                 /* 0x3c8 */
-#define smf_sbi_mask_lsb        56
-#define smf_sbi_shift           (63 - smf_sbi_mask_lsb)
-#define smf_sbi_mask            (0x301LL << smf_sbi_shift)
-#define smf_sbi_bus0_bits       (0x001LL << smf_sbi_shift)
-#define smf_sbi_bus2_bits       (0x100LL << smf_sbi_shift)
-#define smf_sbi2_bus0_bits      (0x201LL << smf_sbi_shift)
-#define smf_sbi2_bus2_bits      (0x300LL << smf_sbi_shift)
-        u64 smf_ato_signal_sel;                                 /* 0x3d0 */
-#define smf_ato_mask_lsb        35
-#define smf_ato_shift           (63 - smf_ato_mask_lsb)
-#define smf_ato_mask            (0x3LL << smf_ato_shift)
-#define smf_ato_bus0_bits       (0x2LL << smf_ato_shift)
-#define smf_ato_bus2_bits       (0x1LL << smf_ato_shift)
-        u8  pad_0x3d8_0x400[0x400 - 0x3d8];                     /* 0x3d8 */
-
-        /* TLB Management Registers */
-        u64 mfc_sdr_RW;                                         /* 0x400 */
-        u8  pad_0x408_0x500[0xf8];                              /* 0x408 */
-        u64 tlb_index_hint_RO;                                  /* 0x500 */
-        u64 tlb_index_W;                                        /* 0x508 */
-        u64 tlb_vpn_RW;                                         /* 0x510 */
-        u64 tlb_rpn_RW;                                         /* 0x518 */
-        u8  pad_0x520_0x540[0x20];                              /* 0x520 */
-        u64 tlb_invalidate_entry_W;                             /* 0x540 */
-        u64 tlb_invalidate_all_W;                               /* 0x548 */
-        u8  pad_0x550_0x580[0x580 - 0x550];                     /* 0x550 */
-
-        /* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */
-        u64 smm_hid;                                            /* 0x580 */
-#define PAGE_SIZE_MASK          0xf000000000000000ull
-#define PAGE_SIZE_16MB_64KB     0x2000000000000000ull
-        u8  pad_0x588_0x600[0x600 - 0x588];                     /* 0x588 */
-
-        /* MFC Status/Control Area */
-        u64 mfc_accr_RW;                                        /* 0x600 */
-#define MFC_ACCR_EA_ACCESS_GET          (1 << 0)
-#define MFC_ACCR_EA_ACCESS_PUT          (1 << 1)
-#define MFC_ACCR_LS_ACCESS_GET          (1 << 3)
-#define MFC_ACCR_LS_ACCESS_PUT          (1 << 4)
-        u8  pad_0x608_0x610[0x8];                               /* 0x608 */
-        u64 mfc_dsisr_RW;                                       /* 0x610 */
-#define MFC_DSISR_PTE_NOT_FOUND         (1 << 30)
-#define MFC_DSISR_ACCESS_DENIED         (1 << 27)
-#define MFC_DSISR_ATOMIC                (1 << 26)
-#define MFC_DSISR_ACCESS_PUT            (1 << 25)
-#define MFC_DSISR_ADDR_MATCH            (1 << 22)
-#define MFC_DSISR_LS                    (1 << 17)
-#define MFC_DSISR_L                     (1 << 16)
-#define MFC_DSISR_ADDRESS_OVERFLOW      (1 << 0)
-        u8  pad_0x618_0x620[0x8];                               /* 0x618 */
-        u64 mfc_dar_RW;                                         /* 0x620 */
-        u8  pad_0x628_0x700[0x700 - 0x628];                     /* 0x628 */
-
-        /* Replacement Management Table (RMT) Area */
-        u64 rmt_index_RW;                                       /* 0x700 */
-        u8  pad_0x708_0x710[0x8];                               /* 0x708 */
-        u64 rmt_data1_RW;                                       /* 0x710 */
-        u8  pad_0x718_0x800[0x800 - 0x718];                     /* 0x718 */
-
-        /* Control/Configuration Registers */
-        u64 mfc_dsir_R;                                         /* 0x800 */
-#define MFC_DSIR_Q                      (1 << 31)
-#define MFC_DSIR_SPU_QUEUE              MFC_DSIR_Q
-        u64 mfc_lsacr_RW;                                       /* 0x808 */
-#define MFC_LSACR_COMPARE_MASK          ((~0ull) << 32)
-#define MFC_LSACR_COMPARE_ADDR          ((~0ull) >> 32)
-        u64 mfc_lscrr_R;                                        /* 0x810 */
-#define MFC_LSCRR_Q                     (1 << 31)
-#define MFC_LSCRR_SPU_QUEUE             MFC_LSCRR_Q
-#define MFC_LSCRR_QI_SHIFT              32
-#define MFC_LSCRR_QI_MASK               ((~0ull) << MFC_LSCRR_QI_SHIFT)
-        u8  pad_0x818_0x820[0x8];                               /* 0x818 */
-        u64 mfc_tclass_id_RW;                                   /* 0x820 */
-#define MFC_TCLASS_ID_ENABLE            (1L << 0L)
-#define MFC_TCLASS_SLOT2_ENABLE         (1L << 5L)
-#define MFC_TCLASS_SLOT1_ENABLE         (1L << 6L)
-#define MFC_TCLASS_SLOT0_ENABLE         (1L << 7L)
-#define MFC_TCLASS_QUOTA_2_SHIFT        8L
-#define MFC_TCLASS_QUOTA_1_SHIFT        16L
-#define MFC_TCLASS_QUOTA_0_SHIFT        24L
-#define MFC_TCLASS_QUOTA_2_MASK         (0x1FL << MFC_TCLASS_QUOTA_2_SHIFT)
-#define MFC_TCLASS_QUOTA_1_MASK         (0x1FL << MFC_TCLASS_QUOTA_1_SHIFT)
-#define MFC_TCLASS_QUOTA_0_MASK         (0x1FL << MFC_TCLASS_QUOTA_0_SHIFT)
-        u8  pad_0x828_0x900[0x900 - 0x828];                     /* 0x828 */
-
-        /* Real Mode Support Registers */
-        u64 mfc_rm_boundary;                                    /* 0x900 */
-        u8  pad_0x908_0x938[0x30];                              /* 0x908 */
-        u64 smf_dma_signal_sel;                                 /* 0x938 */
-#define mfc_dma1_mask_lsb       41
-#define mfc_dma1_shift          (63 - mfc_dma1_mask_lsb)
-#define mfc_dma1_mask           (0x3LL << mfc_dma1_shift)
-#define mfc_dma1_bits           (0x1LL << mfc_dma1_shift)
-#define mfc_dma2_mask_lsb       43
-#define mfc_dma2_shift          (63 - mfc_dma2_mask_lsb)
-#define mfc_dma2_mask           (0x3LL << mfc_dma2_shift)
-#define mfc_dma2_bits           (0x1LL << mfc_dma2_shift)
-        u8  pad_0x940_0xa38[0xf8];                              /* 0x940 */
-        u64 smm_signal_sel;                                     /* 0xa38 */
-#define smm_sig_mask_lsb        12
-#define smm_sig_shift           (63 - smm_sig_mask_lsb)
-#define smm_sig_mask            (0x3LL << smm_sig_shift)
-#define smm_sig_bus0_bits       (0x2LL << smm_sig_shift)
-#define smm_sig_bus2_bits       (0x1LL << smm_sig_shift)
-        u8  pad_0xa40_0xc00[0xc00 - 0xa40];                     /* 0xa40 */
-
-        /* DMA Command Error Area */
-        u64 mfc_cer_R;                                          /* 0xc00 */
-#define MFC_CER_Q               (1 << 31)
-#define MFC_CER_SPU_QUEUE       MFC_CER_Q
-        u8  pad_0xc08_0x1000[0x1000 - 0xc08];                   /* 0xc08 */
-
-        /* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */
-        /* DMA Command Error Area */
-        u64 spu_ecc_cntl_RW;                                    /* 0x1000 */
-#define SPU_ECC_CNTL_E                  (1ull << 0ull)
-#define SPU_ECC_CNTL_ENABLE             SPU_ECC_CNTL_E
-#define SPU_ECC_CNTL_DISABLE            (~SPU_ECC_CNTL_E & 1L)
-#define SPU_ECC_CNTL_S                  (1ull << 1ull)
-#define SPU_ECC_STOP_AFTER_ERROR        SPU_ECC_CNTL_S
-#define SPU_ECC_CONTINUE_AFTER_ERROR    (~SPU_ECC_CNTL_S & 2L)
-#define SPU_ECC_CNTL_B                  (1ull << 2ull)
-#define SPU_ECC_BACKGROUND_ENABLE       SPU_ECC_CNTL_B
-#define SPU_ECC_BACKGROUND_DISABLE      (~SPU_ECC_CNTL_B & 4L)
-#define SPU_ECC_CNTL_I_SHIFT            3ull
-#define SPU_ECC_CNTL_I_MASK             (3ull << SPU_ECC_CNTL_I_SHIFT)
-#define SPU_ECC_WRITE_ALWAYS            (~SPU_ECC_CNTL_I & 12L)
-#define SPU_ECC_WRITE_CORRECTABLE       (1ull << SPU_ECC_CNTL_I_SHIFT)
-#define SPU_ECC_WRITE_UNCORRECTABLE     (3ull << SPU_ECC_CNTL_I_SHIFT)
-#define SPU_ECC_CNTL_D                  (1ull << 5ull)
-#define SPU_ECC_DETECTION_ENABLE        SPU_ECC_CNTL_D
-#define SPU_ECC_DETECTION_DISABLE       (~SPU_ECC_CNTL_D & 32L)
-        u64 spu_ecc_stat_RW;                                    /* 0x1008 */
-#define SPU_ECC_CORRECTED_ERROR         (1ull << 0ul)
-#define SPU_ECC_UNCORRECTED_ERROR       (1ull << 1ul)
-#define SPU_ECC_SCRUB_COMPLETE          (1ull << 2ul)
-#define SPU_ECC_SCRUB_IN_PROGRESS       (1ull << 3ul)
-#define SPU_ECC_INSTRUCTION_ERROR       (1ull << 4ul)
-#define SPU_ECC_DATA_ERROR              (1ull << 5ul)
-#define SPU_ECC_DMA_ERROR               (1ull << 6ul)
-#define SPU_ECC_STATUS_CNT_MASK         (256ull << 8)
-        u64 spu_ecc_addr_RW;                                    /* 0x1010 */
-        u64 spu_err_mask_RW;                                    /* 0x1018 */
-#define SPU_ERR_ILLEGAL_INSTR           (1ull << 0ul)
-#define SPU_ERR_ILLEGAL_CHANNEL         (1ull << 1ul)
-        u8  pad_0x1020_0x1028[0x1028 - 0x1020];                 /* 0x1020 */
-
-        /* SPU Debug-Trace Bus (DTB) Selection Registers */
-        u64 spu_trig0_sel;                                      /* 0x1028 */
-        u64 spu_trig1_sel;                                      /* 0x1030 */
-        u64 spu_trig2_sel;                                      /* 0x1038 */
-        u64 spu_trig3_sel;                                      /* 0x1040 */
-        u64 spu_trace_sel;                                      /* 0x1048 */
-#define spu_trace_sel_mask              0x1f1fLL
-#define spu_trace_sel_bus0_bits         0x1000LL
-#define spu_trace_sel_bus2_bits         0x0010LL
-        u64 spu_event0_sel;                                     /* 0x1050 */
-        u64 spu_event1_sel;                                     /* 0x1058 */
-        u64 spu_event2_sel;                                     /* 0x1060 */
-        u64 spu_event3_sel;                                     /* 0x1068 */
-        u64 spu_trace_cntl;                                     /* 0x1070 */
-} __attribute__ ((aligned(0x2000)));
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
deleted file mode 100644
index a40fd491250c..000000000000
--- a/include/asm-powerpc/spu_csa.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * spu_csa.h: Definitions for SPU context save area (CSA).
- *
- * (C) Copyright IBM 2005
- *
- * Author: Mark Nutter <mnutter@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SPU_CSA_H_
-#define _SPU_CSA_H_
-#ifdef __KERNEL__
-
-/*
- * Total number of 128-bit registers.
- */
-#define NR_SPU_GPRS             128
-#define NR_SPU_SPRS             9
-#define NR_SPU_REGS_PAD         7
-#define NR_SPU_SPILL_REGS       144     /* GPRS + SPRS + PAD */
-#define SIZEOF_SPU_SPILL_REGS   NR_SPU_SPILL_REGS * 16
-
-#define SPU_SAVE_COMPLETE       0x3FFB
-#define SPU_RESTORE_COMPLETE    0x3FFC
-
-/*
- * Definitions for various 'stopped' status conditions,
- * to be recreated during context restore.
- */
-#define SPU_STOPPED_STATUS_P    1
-#define SPU_STOPPED_STATUS_I    2
-#define SPU_STOPPED_STATUS_H    3
-#define SPU_STOPPED_STATUS_S    4
-#define SPU_STOPPED_STATUS_S_I  5
-#define SPU_STOPPED_STATUS_S_P  6
-#define SPU_STOPPED_STATUS_P_H  7
-#define SPU_STOPPED_STATUS_P_I  8
-#define SPU_STOPPED_STATUS_R    9
-
-/*
- * Definitions for software decrementer status flag.
- */
-#define SPU_DECR_STATUS_RUNNING 0x1
-#define SPU_DECR_STATUS_WRAPPED 0x2
-
-#ifndef  __ASSEMBLY__
-/**
- * spu_reg128 - generic 128-bit register definition.
- */
-struct spu_reg128 {
-        u32 slot[4];
-};
-
-/**
- * struct spu_lscsa - Local Store Context Save Area.
- * @gprs: Array of saved registers.
- * @fpcr: Saved floating point status control register.
- * @decr: Saved decrementer value.
- * @decr_status: Indicates software decrementer status flags.
- * @ppu_mb: Saved PPU mailbox data.
- * @ppuint_mb: Saved PPU interrupting mailbox data.
- * @tag_mask: Saved tag group mask.
- * @event_mask: Saved event mask.
- * @srr0: Saved SRR0.
- * @stopped_status: Conditions to be recreated by restore.
- * @ls: Saved contents of Local Storage Area.
- *
- * The LSCSA represents state that is primarily saved and
- * restored by SPU-side code.
- */
-struct spu_lscsa {
-        struct spu_reg128 gprs[128];
-        struct spu_reg128 fpcr;
-        struct spu_reg128 decr;
-        struct spu_reg128 decr_status;
-        struct spu_reg128 ppu_mb;
-        struct spu_reg128 ppuint_mb;
-        struct spu_reg128 tag_mask;
-        struct spu_reg128 event_mask;
-        struct spu_reg128 srr0;
-        struct spu_reg128 stopped_status;
-
-        /*
-         * 'ls' must be page-aligned on all configurations.
-         * Since we don't want to rely on having the spu-gcc
-         * installed to build the kernel and this structure
-         * is used in the SPU-side code, make it 64k-page
-         * aligned for now.
-         */
-        unsigned char ls[LS_SIZE] __attribute__((aligned(65536)));
-};
-
-#ifndef __SPU__
-/*
- * struct spu_problem_collapsed - condensed problem state area, w/o pads.
- */
-struct spu_problem_collapsed {
-        u64 spc_mssync_RW;
-        u32 mfc_lsa_W;
-        u32 unused_pad0;
-        u64 mfc_ea_W;
-        union mfc_tag_size_class_cmd mfc_union_W;
-        u32 dma_qstatus_R;
-        u32 dma_querytype_RW;
-        u32 dma_querymask_RW;
-        u32 dma_tagstatus_R;
-        u32 pu_mb_R;
-        u32 spu_mb_W;
-        u32 mb_stat_R;
-        u32 spu_runcntl_RW;
-        u32 spu_status_R;
-        u32 spu_spc_R;
-        u32 spu_npc_RW;
-        u32 signal_notify1;
-        u32 signal_notify2;
-        u32 unused_pad1;
-};
-
-/*
- * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads.
- */
-struct spu_priv1_collapsed {
-        u64 mfc_sr1_RW;
-        u64 mfc_lpid_RW;
-        u64 spu_idr_RW;
-        u64 mfc_vr_RO;
-        u64 spu_vr_RO;
-        u64 int_mask_class0_RW;
-        u64 int_mask_class1_RW;
-        u64 int_mask_class2_RW;
-        u64 int_stat_class0_RW;
-        u64 int_stat_class1_RW;
-        u64 int_stat_class2_RW;
-        u64 int_route_RW;
-        u64 mfc_atomic_flush_RW;
-        u64 resource_allocation_groupID_RW;
-        u64 resource_allocation_enable_RW;
-        u64 mfc_fir_R;
-        u64 mfc_fir_status_or_W;
-        u64 mfc_fir_status_and_W;
-        u64 mfc_fir_mask_R;
-        u64 mfc_fir_mask_or_W;
-        u64 mfc_fir_mask_and_W;
-        u64 mfc_fir_chkstp_enable_RW;
-        u64 smf_sbi_signal_sel;
-        u64 smf_ato_signal_sel;
-        u64 tlb_index_hint_RO;
-        u64 tlb_index_W;
-        u64 tlb_vpn_RW;
-        u64 tlb_rpn_RW;
-        u64 tlb_invalidate_entry_W;
-        u64 tlb_invalidate_all_W;
-        u64 smm_hid;
-        u64 mfc_accr_RW;
-        u64 mfc_dsisr_RW;
-        u64 mfc_dar_RW;
-        u64 rmt_index_RW;
-        u64 rmt_data1_RW;
-        u64 mfc_dsir_R;
-        u64 mfc_lsacr_RW;
-        u64 mfc_lscrr_R;
-        u64 mfc_tclass_id_RW;
-        u64 mfc_rm_boundary;
-        u64 smf_dma_signal_sel;
-        u64 smm_signal_sel;
-        u64 mfc_cer_R;
-        u64 pu_ecc_cntl_RW;
-        u64 pu_ecc_stat_RW;
-        u64 spu_ecc_addr_RW;
-        u64 spu_err_mask_RW;
-        u64 spu_trig0_sel;
-        u64 spu_trig1_sel;
-        u64 spu_trig2_sel;
-        u64 spu_trig3_sel;
-        u64 spu_trace_sel;
-        u64 spu_event0_sel;
-        u64 spu_event1_sel;
-        u64 spu_event2_sel;
-        u64 spu_event3_sel;
-        u64 spu_trace_cntl;
-};
-
-/*
- * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
- */
-struct spu_priv2_collapsed {
-        u64 slb_index_W;
-        u64 slb_esid_RW;
-        u64 slb_vsid_RW;
-        u64 slb_invalidate_entry_W;
-        u64 slb_invalidate_all_W;
-        struct mfc_cq_sr spuq[16];
-        struct mfc_cq_sr puq[8];
-        u64 mfc_control_RW;
-        u64 puint_mb_R;
-        u64 spu_privcntl_RW;
-        u64 spu_lslr_RW;
-        u64 spu_chnlcntptr_RW;
-        u64 spu_chnlcnt_RW;
-        u64 spu_chnldata_RW;
-        u64 spu_cfg_RW;
-        u64 spu_tag_status_query_RW;
-        u64 spu_cmd_buf1_RW;
-        u64 spu_cmd_buf2_RW;
-        u64 spu_atomic_status_RW;
-};
-
-/**
- * struct spu_state
- * @lscsa: Local Store Context Save Area.
- * @prob: Collapsed Problem State Area, w/o pads.
- * @priv1: Collapsed Privileged 1 Area, w/o pads.
- * @priv2: Collapsed Privileged 2 Area, w/o pads.
- * @spu_chnlcnt_RW: Array of saved channel counts.
- * @spu_chnldata_RW: Array of saved channel data.
- * @suspend_time: Time stamp when decrementer disabled.
- *
- * Structure representing the whole of the SPU
- * context save area (CSA).  This struct contains
- * all of the state necessary to suspend and then
- * later optionally resume execution of an SPU
- * context.
- *
- * The @lscsa region is by far the largest, and is
- * allocated separately so that it may either be
- * pinned or mapped to/from application memory, as
- * appropriate for the OS environment.
- */
-struct spu_state {
-        struct spu_lscsa *lscsa;
-#ifdef CONFIG_SPU_FS_64K_LS
-        int             use_big_pages;
-        /* One struct page per 64k page */
-#define SPU_LSCSA_NUM_BIG_PAGES (sizeof(struct spu_lscsa) / 0x10000)
-        struct page     *lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES];
-#endif
-        struct spu_problem_collapsed prob;
-        struct spu_priv1_collapsed priv1;
-        struct spu_priv2_collapsed priv2;
-        u64 spu_chnlcnt_RW[32];
-        u64 spu_chnldata_RW[32];
-        u32 spu_mailbox_data[4];
-        u32 pu_mailbox_data[1];
-        u64 class_0_dar, class_0_pending;
-        u64 class_1_dar, class_1_dsisr;
-        unsigned long suspend_time;
-        spinlock_t register_lock;
-};
-
-#endif /* !__SPU__ */
-#endif /* __KERNEL__ */
-#endif /* !__ASSEMBLY__ */
-#endif /* _SPU_CSA_H_ */
diff --git a/include/asm-powerpc/spu_info.h b/include/asm-powerpc/spu_info.h
deleted file mode 100644
index 3545efbf9891..000000000000
--- a/include/asm-powerpc/spu_info.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * SPU info structures
- *
- * (C) Copyright 2006 IBM Corp.
- *
- * Author: Dwayne Grant McConnell <decimal@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SPU_INFO_H
-#define _SPU_INFO_H
-
-#ifdef __KERNEL__
-#include <asm/spu.h>
-#include <linux/types.h>
-#else
-struct mfc_cq_sr {
-        __u64 mfc_cq_data0_RW;
-        __u64 mfc_cq_data1_RW;
-        __u64 mfc_cq_data2_RW;
-        __u64 mfc_cq_data3_RW;
-};
-#endif /* __KERNEL__ */
-
-struct spu_dma_info {
-        __u64 dma_info_type;
-        __u64 dma_info_mask;
-        __u64 dma_info_status;
-        __u64 dma_info_stall_and_notify;
-        __u64 dma_info_atomic_command_status;
-        struct mfc_cq_sr dma_info_command_data[16];
-};
-
-struct spu_proxydma_info {
-        __u64 proxydma_info_type;
-        __u64 proxydma_info_mask;
-        __u64 proxydma_info_status;
-        struct mfc_cq_sr proxydma_info_command_data[8];
-};
-
-#endif
diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h
deleted file mode 100644
index 25020a34ce7f..000000000000
--- a/include/asm-powerpc/spu_priv1.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Defines an spu hypervisor abstraction layer.
- *
- *  Copyright 2006 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(_SPU_PRIV1_H)
-#define _SPU_PRIV1_H
-#if defined(__KERNEL__)
-
-#include <linux/types.h>
-
-struct spu;
-struct spu_context;
-
-/* access to priv1 registers */
-
-struct spu_priv1_ops {
-        void (*int_mask_and) (struct spu *spu, int class, u64 mask);
-        void (*int_mask_or) (struct spu *spu, int class, u64 mask);
-        void (*int_mask_set) (struct spu *spu, int class, u64 mask);
-        u64 (*int_mask_get) (struct spu *spu, int class);
-        void (*int_stat_clear) (struct spu *spu, int class, u64 stat);
-        u64 (*int_stat_get) (struct spu *spu, int class);
-        void (*cpu_affinity_set) (struct spu *spu, int cpu);
-        u64 (*mfc_dar_get) (struct spu *spu);
-        u64 (*mfc_dsisr_get) (struct spu *spu);
-        void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr);
-        void (*mfc_sdr_setup) (struct spu *spu);
-        void (*mfc_sr1_set) (struct spu *spu, u64 sr1);
-        u64 (*mfc_sr1_get) (struct spu *spu);
-        void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id);
-        u64 (*mfc_tclass_id_get) (struct spu *spu);
-        void (*tlb_invalidate) (struct spu *spu);
-        void (*resource_allocation_groupID_set) (struct spu *spu, u64 id);
-        u64 (*resource_allocation_groupID_get) (struct spu *spu);
-        void (*resource_allocation_enable_set) (struct spu *spu, u64 enable);
-        u64 (*resource_allocation_enable_get) (struct spu *spu);
-};
-
-extern const struct spu_priv1_ops* spu_priv1_ops;
-
-static inline void
-spu_int_mask_and (struct spu *spu, int class, u64 mask)
-{
-        spu_priv1_ops->int_mask_and(spu, class, mask);
-}
-
-static inline void
-spu_int_mask_or (struct spu *spu, int class, u64 mask)
-{
-        spu_priv1_ops->int_mask_or(spu, class, mask);
-}
-
-static inline void
-spu_int_mask_set (struct spu *spu, int class, u64 mask)
-{
-        spu_priv1_ops->int_mask_set(spu, class, mask);
-}
-
-static inline u64
-spu_int_mask_get (struct spu *spu, int class)
-{
-        return spu_priv1_ops->int_mask_get(spu, class);
-}
-
-static inline void
-spu_int_stat_clear (struct spu *spu, int class, u64 stat)
-{
-        spu_priv1_ops->int_stat_clear(spu, class, stat);
-}
-
-static inline u64
-spu_int_stat_get (struct spu *spu, int class)
-{
-        return spu_priv1_ops->int_stat_get (spu, class);
-}
-
-static inline void
-spu_cpu_affinity_set (struct spu *spu, int cpu)
-{
-        spu_priv1_ops->cpu_affinity_set(spu, cpu);
-}
-
-static inline u64
-spu_mfc_dar_get (struct spu *spu)
-{
-        return spu_priv1_ops->mfc_dar_get(spu);
-}
-
-static inline u64
-spu_mfc_dsisr_get (struct spu *spu)
-{
-        return spu_priv1_ops->mfc_dsisr_get(spu);
-}
-
-static inline void
-spu_mfc_dsisr_set (struct spu *spu, u64 dsisr)
-{
-        spu_priv1_ops->mfc_dsisr_set(spu, dsisr);
-}
-
-static inline void
-spu_mfc_sdr_setup (struct spu *spu)
-{
-        spu_priv1_ops->mfc_sdr_setup(spu);
-}
-
-static inline void
-spu_mfc_sr1_set (struct spu *spu, u64 sr1)
-{
-        spu_priv1_ops->mfc_sr1_set(spu, sr1);
-}
-
-static inline u64
-spu_mfc_sr1_get (struct spu *spu)
-{
-        return spu_priv1_ops->mfc_sr1_get(spu);
-}
-
-static inline void
-spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id)
-{
-        spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id);
-}
-
-static inline u64
-spu_mfc_tclass_id_get (struct spu *spu)
-{
-        return spu_priv1_ops->mfc_tclass_id_get(spu);
-}
-
-static inline void
-spu_tlb_invalidate (struct spu *spu)
-{
-        spu_priv1_ops->tlb_invalidate(spu);
-}
-
-static inline void
-spu_resource_allocation_groupID_set (struct spu *spu, u64 id)
-{
-        spu_priv1_ops->resource_allocation_groupID_set(spu, id);
-}
-
-static inline u64
-spu_resource_allocation_groupID_get (struct spu *spu)
-{
-        return spu_priv1_ops->resource_allocation_groupID_get(spu);
-}
-
-static inline void
-spu_resource_allocation_enable_set (struct spu *spu, u64 enable)
-{
-        spu_priv1_ops->resource_allocation_enable_set(spu, enable);
-}
-
-static inline u64
-spu_resource_allocation_enable_get (struct spu *spu)
-{
-        return spu_priv1_ops->resource_allocation_enable_get(spu);
-}
-
-/* spu management abstraction */
-
-struct spu_management_ops {
-        int (*enumerate_spus)(int (*fn)(void *data));
-        int (*create_spu)(struct spu *spu, void *data);
-        int (*destroy_spu)(struct spu *spu);
-        void (*enable_spu)(struct spu_context *ctx);
-        void (*disable_spu)(struct spu_context *ctx);
-        int (*init_affinity)(void);
-};
-
-extern const struct spu_management_ops* spu_management_ops;
-
-static inline int
-spu_enumerate_spus (int (*fn)(void *data))
-{
-        return spu_management_ops->enumerate_spus(fn);
-}
-
-static inline int
-spu_create_spu (struct spu *spu, void *data)
-{
-        return spu_management_ops->create_spu(spu, data);
-}
-
-static inline int
-spu_destroy_spu (struct spu *spu)
-{
-        return spu_management_ops->destroy_spu(spu);
-}
-
-static inline int
-spu_init_affinity (void)
-{
-        return spu_management_ops->init_affinity();
-}
-
-static inline void
-spu_enable_spu (struct spu_context *ctx)
-{
-        spu_management_ops->enable_spu(ctx);
-}
-
-static inline void
-spu_disable_spu (struct spu_context *ctx)
-{
-        spu_management_ops->disable_spu(ctx);
-}
-
-/*
- * The declarations folowing are put here for convenience
- * and only intended to be used by the platform setup code.
- */
-
-extern const struct spu_priv1_ops spu_priv1_mmio_ops;
-extern const struct spu_priv1_ops spu_priv1_beat_ops;
-
-extern const struct spu_management_ops spu_management_of_ops;
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-powerpc/sstep.h b/include/asm-powerpc/sstep.h
deleted file mode 100644
index f593b0f9b627..000000000000
--- a/include/asm-powerpc/sstep.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2004 Paul Mackerras <paulus@au.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-struct pt_regs;
-
-/*
- * We don't allow single-stepping an mtmsrd that would clear
- * MSR_RI, since that would make the exception unrecoverable.
- * Since we need to single-step to proceed from a breakpoint,
- * we don't allow putting a breakpoint on an mtmsrd instruction.
- * Similarly we don't allow breakpoints on rfid instructions.
- * These macros tell us if an instruction is a mtmsrd or rfid.
- * Note that IS_MTMSRD returns true for both an mtmsr (32-bit)
- * and an mtmsrd (64-bit).
- */
-#define IS_MTMSRD(instr)        (((instr) & 0xfc0007be) == 0x7c000124)
-#define IS_RFID(instr)          (((instr) & 0xfc0007fe) == 0x4c000024)
-#define IS_RFI(instr)           (((instr) & 0xfc0007fe) == 0x4c000064)
-
-/* Emulate instructions that cause a transfer of control. */
-extern int emulate_step(struct pt_regs *regs, unsigned int instr);
diff --git a/include/asm-powerpc/stat.h b/include/asm-powerpc/stat.h
deleted file mode 100644
index e4edc510b530..000000000000
--- a/include/asm-powerpc/stat.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef _ASM_POWERPC_STAT_H
-#define _ASM_POWERPC_STAT_H
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-
-#define STAT_HAVE_NSEC 1
-
-#ifndef __powerpc64__
-struct __old_kernel_stat {
-        unsigned short st_dev;
-        unsigned short st_ino;
-        unsigned short st_mode;
-        unsigned short st_nlink;
-        unsigned short st_uid;
-        unsigned short st_gid;
-        unsigned short st_rdev;
-        unsigned long  st_size;
-        unsigned long  st_atime;
-        unsigned long  st_mtime;
-        unsigned long  st_ctime;
-};
-#endif /* !__powerpc64__ */
-
-struct stat {
-        unsigned long   st_dev;
-        ino_t           st_ino;
-#ifdef __powerpc64__
-        nlink_t         st_nlink;
-        mode_t          st_mode;
-#else
-        mode_t          st_mode;
-        nlink_t         st_nlink;
-#endif
-        uid_t           st_uid;
-        gid_t           st_gid;
-        unsigned long   st_rdev;
-        off_t           st_size;
-        unsigned long   st_blksize;
-        unsigned long   st_blocks;
-        unsigned long   st_atime;
-        unsigned long   st_atime_nsec;
-        unsigned long   st_mtime;
-        unsigned long   st_mtime_nsec;
-        unsigned long   st_ctime;
-        unsigned long   st_ctime_nsec;
-        unsigned long   __unused4;
-        unsigned long   __unused5;
-#ifdef __powerpc64__
-        unsigned long   __unused6;
-#endif
-};
-
-/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
-struct stat64 {
-        unsigned long long st_dev;              /* Device.  */
-        unsigned long long st_ino;              /* File serial number.  */
-        unsigned int    st_mode;        /* File mode.  */
-        unsigned int    st_nlink;       /* Link count.  */
-        unsigned int    st_uid;         /* User ID of the file's owner.  */
-        unsigned int    st_gid;         /* Group ID of the file's group. */
-        unsigned long long st_rdev;     /* Device number, if device.  */
-        unsigned short  __pad2;
-        long long       st_size;        /* Size of file, in bytes.  */
-        int             st_blksize;     /* Optimal block size for I/O.  */
-        long long       st_blocks;      /* Number 512-byte blocks allocated. */
-        int             st_atime;       /* Time of last access.  */
-        unsigned int    st_atime_nsec;
-        int             st_mtime;       /* Time of last modification.  */
-        unsigned int    st_mtime_nsec;
-        int             st_ctime;       /* Time of last status change.  */
-        unsigned int    st_ctime_nsec;
-        unsigned int    __unused4;
-        unsigned int    __unused5;
-};
-
-#endif /* _ASM_POWERPC_STAT_H */
diff --git a/include/asm-powerpc/statfs.h b/include/asm-powerpc/statfs.h
deleted file mode 100644
index 67024026c10d..000000000000
--- a/include/asm-powerpc/statfs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _ASM_POWERPC_STATFS_H
-#define _ASM_POWERPC_STATFS_H
-
-/* For ppc32 we just use the generic definitions, not so simple on ppc64 */
-
-#ifndef __powerpc64__
-#include <asm-generic/statfs.h>
-#else
-
-#ifndef __KERNEL_STRICT_NAMES
-#include <linux/types.h>
-typedef __kernel_fsid_t fsid_t;
-#endif
-
-/*
- * We're already 64-bit, so duplicate the definition
- */
-struct statfs {
-        long f_type;
-        long f_bsize;
-        long f_blocks;
-        long f_bfree;
-        long f_bavail;
-        long f_files;
-        long f_ffree;
-        __kernel_fsid_t f_fsid;
-        long f_namelen;
-        long f_frsize;
-        long f_spare[5];
-};
-
-struct statfs64 {
-        long f_type;
-        long f_bsize;
-        long f_blocks;
-        long f_bfree;
-        long f_bavail;
-        long f_files;
-        long f_ffree;
-        __kernel_fsid_t f_fsid;
-        long f_namelen;
-        long f_frsize;
-        long f_spare[5];
-};
-
-struct compat_statfs64 {
-        __u32 f_type;
-        __u32 f_bsize;
-        __u64 f_blocks;
-        __u64 f_bfree;
-        __u64 f_bavail;
-        __u64 f_files;
-        __u64 f_ffree;
-        __kernel_fsid_t f_fsid;
-        __u32 f_namelen;
-        __u32 f_frsize;
-        __u32 f_spare[5];
-};
-#endif /* ! __powerpc64__ */
-#endif
diff --git a/include/asm-powerpc/string.h b/include/asm-powerpc/string.h
deleted file mode 100644
index e40010abcaf1..000000000000
--- a/include/asm-powerpc/string.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _ASM_POWERPC_STRING_H
-#define _ASM_POWERPC_STRING_H
-
-#ifdef __KERNEL__
-
-#define __HAVE_ARCH_STRCPY
-#define __HAVE_ARCH_STRNCPY
-#define __HAVE_ARCH_STRLEN
-#define __HAVE_ARCH_STRCMP
-#define __HAVE_ARCH_STRNCMP
-#define __HAVE_ARCH_STRCAT
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMMOVE
-#define __HAVE_ARCH_MEMCMP
-#define __HAVE_ARCH_MEMCHR
-
-extern char * strcpy(char *,const char *);
-extern char * strncpy(char *,const char *, __kernel_size_t);
-extern __kernel_size_t strlen(const char *);
-extern int strcmp(const char *,const char *);
-extern int strncmp(const char *, const char *, __kernel_size_t);
-extern char * strcat(char *, const char *);
-extern void * memset(void *,int,__kernel_size_t);
-extern void * memcpy(void *,const void *,__kernel_size_t);
-extern void * memmove(void *,const void *,__kernel_size_t);
-extern int memcmp(const void *,const void *,__kernel_size_t);
-extern void * memchr(const void *,int,__kernel_size_t);
-
-#endif /* __KERNEL__ */
-
-#endif  /* _ASM_POWERPC_STRING_H */
diff --git a/include/asm-powerpc/suspend.h b/include/asm-powerpc/suspend.h
deleted file mode 100644
index cbf2c9404c37..000000000000
--- a/include/asm-powerpc/suspend.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_POWERPC_SUSPEND_H
-#define __ASM_POWERPC_SUSPEND_H
-
-static inline int arch_prepare_suspend(void) { return 0; }
-
-void save_processor_state(void);
-void restore_processor_state(void);
-
-#endif /* __ASM_POWERPC_SUSPEND_H */
diff --git a/include/asm-powerpc/synch.h b/include/asm-powerpc/synch.h
deleted file mode 100644
index 45963e80f557..000000000000
--- a/include/asm-powerpc/synch.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _ASM_POWERPC_SYNCH_H 
-#define _ASM_POWERPC_SYNCH_H 
-#ifdef __KERNEL__
-
-#include <linux/stringify.h>
-#include <asm/feature-fixups.h>
-
-#ifndef __ASSEMBLY__
-extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
-extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
-                             void *fixup_end);
-
-static inline void eieio(void)
-{
-        __asm__ __volatile__ ("eieio" : : : "memory");
-}
-
-static inline void isync(void)
-{
-        __asm__ __volatile__ ("isync" : : : "memory");
-}
-#endif /* __ASSEMBLY__ */
-
-#if defined(__powerpc64__)
-#    define LWSYNC      lwsync
-#elif defined(CONFIG_E500)
-#    define LWSYNC                                      \
-        START_LWSYNC_SECTION(96);                       \
-        sync;                                           \
-        MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup);
-#else
-#    define LWSYNC      sync
-#endif
-
-#ifdef CONFIG_SMP
-#define ISYNC_ON_SMP    "\n\tisync\n"
-#define LWSYNC_ON_SMP   stringify_in_c(LWSYNC) "\n"
-#else
-#define ISYNC_ON_SMP
-#define LWSYNC_ON_SMP
-#endif
-
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_SYNCH_H */
diff --git a/include/asm-powerpc/syscall.h b/include/asm-powerpc/syscall.h
deleted file mode 100644
index efa7f0b879f3..000000000000
--- a/include/asm-powerpc/syscall.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Access to user system call parameters and results
- *
- * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * See asm-generic/syscall.h for descriptions of what we must do here.
- */
-
-#ifndef _ASM_SYSCALL_H
-#define _ASM_SYSCALL_H  1
-
-#include <linux/sched.h>
-
-static inline long syscall_get_nr(struct task_struct *task,
-                                  struct pt_regs *regs)
-{
-        return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L;
-}
-
-static inline void syscall_rollback(struct task_struct *task,
-                                    struct pt_regs *regs)
-{
-        regs->gpr[3] = regs->orig_gpr3;
-}
-
-static inline long syscall_get_error(struct task_struct *task,
-                                     struct pt_regs *regs)
-{
-        return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0;
-}
-
-static inline long syscall_get_return_value(struct task_struct *task,
-                                            struct pt_regs *regs)
-{
-        return regs->gpr[3];
-}
-
-static inline void syscall_set_return_value(struct task_struct *task,
-                                            struct pt_regs *regs,
-                                            int error, long val)
-{
-        if (error) {
-                regs->ccr |= 0x1000L;
-                regs->gpr[3] = -error;
-        } else {
-                regs->ccr &= ~0x1000L;
-                regs->gpr[3] = val;
-        }
-}
-
-static inline void syscall_get_arguments(struct task_struct *task,
-                                         struct pt_regs *regs,
-                                         unsigned int i, unsigned int n,
-                                         unsigned long *args)
-{
-        BUG_ON(i + n > 6);
-#ifdef CONFIG_PPC64
-        if (test_tsk_thread_flag(task, TIF_32BIT)) {
-                /*
-                 * Zero-extend 32-bit argument values.  The high bits are
-                 * garbage ignored by the actual syscall dispatch.
-                 */
-                while (n-- > 0)
-                        args[n] = (u32) regs->gpr[3 + i + n];
-                return;
-        }
-#endif
-        memcpy(args, &regs->gpr[3 + i], n * sizeof(args[0]));
-}
-
-static inline void syscall_set_arguments(struct task_struct *task,
-                                         struct pt_regs *regs,
-                                         unsigned int i, unsigned int n,
-                                         const unsigned long *args)
-{
-        BUG_ON(i + n > 6);
-        memcpy(&regs->gpr[3 + i], args, n * sizeof(args[0]));
-}
-
-#endif  /* _ASM_SYSCALL_H */
diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h
deleted file mode 100644
index eb8eb400c664..000000000000
--- a/include/asm-powerpc/syscalls.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef __ASM_POWERPC_SYSCALLS_H
-#define __ASM_POWERPC_SYSCALLS_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <asm/signal.h>
-
-struct new_utsname;
-struct pt_regs;
-struct rtas_args;
-struct sigaction;
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
-                unsigned long prot, unsigned long flags,
-                unsigned long fd, off_t offset);
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
-                unsigned long prot, unsigned long flags,
-                unsigned long fd, unsigned long pgoff);
-asmlinkage int sys_execve(unsigned long a0, unsigned long a1,
-                unsigned long a2, unsigned long a3, unsigned long a4,
-                unsigned long a5, struct pt_regs *regs);
-asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp,
-                int __user *parent_tidp, void __user *child_threadptr,
-                int __user *child_tidp, int p6, struct pt_regs *regs);
-asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
-                unsigned long p3, unsigned long p4, unsigned long p5,
-                unsigned long p6, struct pt_regs *regs);
-asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
-                unsigned long p3, unsigned long p4, unsigned long p5,
-                unsigned long p6, struct pt_regs *regs);
-asmlinkage long sys_pipe(int __user *fildes);
-asmlinkage long sys_pipe2(int __user *fildes, int flags);
-asmlinkage long sys_rt_sigaction(int sig,
-                const struct sigaction __user *act,
-                struct sigaction __user *oact, size_t sigsetsize);
-asmlinkage int sys_ipc(uint call, int first, unsigned long second,
-                long third, void __user *ptr, long fifth);
-asmlinkage long ppc64_personality(unsigned long personality);
-asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
-asmlinkage time_t sys64_time(time_t __user * tloc);
-asmlinkage long ppc_newuname(struct new_utsname __user * name);
-
-asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
-                size_t sigsetsize);
-asmlinkage long sys_sigaltstack(const stack_t __user *uss,
-                stack_t __user *uoss, unsigned long r5, unsigned long r6,
-                unsigned long r7, unsigned long r8, struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_SYSCALLS_H */
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
deleted file mode 100644
index e084272ed1c2..000000000000
--- a/include/asm-powerpc/systbl.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * List of powerpc syscalls. For the meaning of the _SPU suffix see
- * arch/powerpc/platforms/cell/spu_callbacks.c
- */
-
-SYSCALL(restart_syscall)
-SYSCALL(exit)
-PPC_SYS(fork)
-SYSCALL_SPU(read)
-SYSCALL_SPU(write)
-COMPAT_SYS_SPU(open)
-SYSCALL_SPU(close)
-COMPAT_SYS_SPU(waitpid)
-COMPAT_SYS_SPU(creat)
-SYSCALL_SPU(link)
-SYSCALL_SPU(unlink)
-COMPAT_SYS(execve)
-SYSCALL_SPU(chdir)
-COMPAT_SYS_SPU(time)
-SYSCALL_SPU(mknod)
-SYSCALL_SPU(chmod)
-SYSCALL_SPU(lchown)
-SYSCALL(ni_syscall)
-OLDSYS(stat)
-SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek)
-SYSCALL_SPU(getpid)
-COMPAT_SYS(mount)
-SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount)
-SYSCALL_SPU(setuid)
-SYSCALL_SPU(getuid)
-COMPAT_SYS_SPU(stime)
-COMPAT_SYS(ptrace)
-SYSCALL_SPU(alarm)
-OLDSYS(fstat)
-COMPAT_SYS(pause)
-COMPAT_SYS(utime)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(access)
-COMPAT_SYS_SPU(nice)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(sync)
-COMPAT_SYS_SPU(kill)
-SYSCALL_SPU(rename)
-COMPAT_SYS_SPU(mkdir)
-SYSCALL_SPU(rmdir)
-SYSCALL_SPU(dup)
-SYSCALL_SPU(pipe)
-COMPAT_SYS_SPU(times)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(brk)
-SYSCALL_SPU(setgid)
-SYSCALL_SPU(getgid)
-SYSCALL(signal)
-SYSCALL_SPU(geteuid)
-SYSCALL_SPU(getegid)
-SYSCALL(acct)
-SYSCALL(umount)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(ioctl)
-COMPAT_SYS_SPU(fcntl)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(setpgid)
-SYSCALL(ni_syscall)
-SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
-COMPAT_SYS_SPU(umask)
-SYSCALL_SPU(chroot)
-SYSCALL(ustat)
-SYSCALL_SPU(dup2)
-SYSCALL_SPU(getppid)
-SYSCALL_SPU(getpgrp)
-SYSCALL_SPU(setsid)
-SYS32ONLY(sigaction)
-SYSCALL_SPU(sgetmask)
-COMPAT_SYS_SPU(ssetmask)
-SYSCALL_SPU(setreuid)
-SYSCALL_SPU(setregid)
-SYS32ONLY(sigsuspend)
-COMPAT_SYS(sigpending)
-COMPAT_SYS_SPU(sethostname)
-COMPAT_SYS_SPU(setrlimit)
-COMPAT_SYS(old_getrlimit)
-COMPAT_SYS_SPU(getrusage)
-COMPAT_SYS_SPU(gettimeofday)
-COMPAT_SYS_SPU(settimeofday)
-COMPAT_SYS_SPU(getgroups)
-COMPAT_SYS_SPU(setgroups)
-SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select)
-SYSCALL_SPU(symlink)
-OLDSYS(lstat)
-COMPAT_SYS_SPU(readlink)
-SYSCALL(uselib)
-SYSCALL(swapon)
-SYSCALL(reboot)
-SYSX(sys_ni_syscall,old32_readdir,old_readdir)
-SYSCALL_SPU(mmap)
-SYSCALL_SPU(munmap)
-SYSCALL_SPU(truncate)
-SYSCALL_SPU(ftruncate)
-SYSCALL_SPU(fchmod)
-SYSCALL_SPU(fchown)
-COMPAT_SYS_SPU(getpriority)
-COMPAT_SYS_SPU(setpriority)
-SYSCALL(ni_syscall)
-COMPAT_SYS(statfs)
-COMPAT_SYS(fstatfs)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(socketcall)
-COMPAT_SYS_SPU(syslog)
-COMPAT_SYS_SPU(setitimer)
-COMPAT_SYS_SPU(getitimer)
-COMPAT_SYS_SPU(newstat)
-COMPAT_SYS_SPU(newlstat)
-COMPAT_SYS_SPU(newfstat)
-SYSX(sys_ni_syscall,sys_uname,sys_uname)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(vhangup)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(wait4)
-SYSCALL(swapoff)
-COMPAT_SYS_SPU(sysinfo)
-COMPAT_SYS(ipc)
-SYSCALL_SPU(fsync)
-SYS32ONLY(sigreturn)
-PPC_SYS(clone)
-COMPAT_SYS_SPU(setdomainname)
-PPC_SYS_SPU(newuname)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(adjtimex)
-SYSCALL_SPU(mprotect)
-SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask)
-SYSCALL(ni_syscall)
-SYSCALL(init_module)
-SYSCALL(delete_module)
-SYSCALL(ni_syscall)
-SYSCALL(quotactl)
-COMPAT_SYS_SPU(getpgid)
-SYSCALL_SPU(fchdir)
-SYSCALL_SPU(bdflush)
-COMPAT_SYS(sysfs)
-SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(setfsuid)
-SYSCALL_SPU(setfsgid)
-SYSCALL_SPU(llseek)
-COMPAT_SYS_SPU(getdents)
-SYSX_SPU(sys_select,ppc32_select,ppc_select)
-SYSCALL_SPU(flock)
-SYSCALL_SPU(msync)
-COMPAT_SYS_SPU(readv)
-COMPAT_SYS_SPU(writev)
-COMPAT_SYS_SPU(getsid)
-SYSCALL_SPU(fdatasync)
-COMPAT_SYS(sysctl)
-SYSCALL_SPU(mlock)
-SYSCALL_SPU(munlock)
-SYSCALL_SPU(mlockall)
-SYSCALL_SPU(munlockall)
-COMPAT_SYS_SPU(sched_setparam)
-COMPAT_SYS_SPU(sched_getparam)
-COMPAT_SYS_SPU(sched_setscheduler)
-COMPAT_SYS_SPU(sched_getscheduler)
-SYSCALL_SPU(sched_yield)
-COMPAT_SYS_SPU(sched_get_priority_max)
-COMPAT_SYS_SPU(sched_get_priority_min)
-COMPAT_SYS_SPU(sched_rr_get_interval)
-COMPAT_SYS_SPU(nanosleep)
-SYSCALL_SPU(mremap)
-SYSCALL_SPU(setresuid)
-SYSCALL_SPU(getresuid)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(poll)
-COMPAT_SYS(nfsservctl)
-SYSCALL_SPU(setresgid)
-SYSCALL_SPU(getresgid)
-COMPAT_SYS_SPU(prctl)
-COMPAT_SYS(rt_sigreturn)
-COMPAT_SYS(rt_sigaction)
-COMPAT_SYS(rt_sigprocmask)
-COMPAT_SYS(rt_sigpending)
-COMPAT_SYS(rt_sigtimedwait)
-COMPAT_SYS(rt_sigqueueinfo)
-COMPAT_SYS(rt_sigsuspend)
-COMPAT_SYS_SPU(pread64)
-COMPAT_SYS_SPU(pwrite64)
-SYSCALL_SPU(chown)
-SYSCALL_SPU(getcwd)
-SYSCALL_SPU(capget)
-SYSCALL_SPU(capset)
-COMPAT_SYS(sigaltstack)
-SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-PPC_SYS(vfork)
-COMPAT_SYS_SPU(getrlimit)
-COMPAT_SYS_SPU(readahead)
-SYS32ONLY(mmap2)
-SYS32ONLY(truncate64)
-SYS32ONLY(ftruncate64)
-SYSX(sys_ni_syscall,sys_stat64,sys_stat64)
-SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64)
-SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64)
-SYSCALL(pciconfig_read)
-SYSCALL(pciconfig_write)
-SYSCALL(pciconfig_iobase)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(getdents64)
-SYSCALL_SPU(pivot_root)
-SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64)
-SYSCALL_SPU(madvise)
-SYSCALL_SPU(mincore)
-SYSCALL_SPU(gettid)
-SYSCALL_SPU(tkill)
-SYSCALL_SPU(setxattr)
-SYSCALL_SPU(lsetxattr)
-SYSCALL_SPU(fsetxattr)
-SYSCALL_SPU(getxattr)
-SYSCALL_SPU(lgetxattr)
-SYSCALL_SPU(fgetxattr)
-SYSCALL_SPU(listxattr)
-SYSCALL_SPU(llistxattr)
-SYSCALL_SPU(flistxattr)
-SYSCALL_SPU(removexattr)
-SYSCALL_SPU(lremovexattr)
-SYSCALL_SPU(fremovexattr)
-COMPAT_SYS_SPU(futex)
-COMPAT_SYS_SPU(sched_setaffinity)
-COMPAT_SYS_SPU(sched_getaffinity)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-SYS32ONLY(sendfile64)
-COMPAT_SYS_SPU(io_setup)
-SYSCALL_SPU(io_destroy)
-COMPAT_SYS_SPU(io_getevents)
-COMPAT_SYS_SPU(io_submit)
-SYSCALL_SPU(io_cancel)
-SYSCALL(set_tid_address)
-SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64)
-SYSCALL(exit_group)
-SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie)
-SYSCALL_SPU(epoll_create)
-SYSCALL_SPU(epoll_ctl)
-SYSCALL_SPU(epoll_wait)
-SYSCALL_SPU(remap_file_pages)
-SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create)
-COMPAT_SYS_SPU(timer_settime)
-COMPAT_SYS_SPU(timer_gettime)
-SYSCALL_SPU(timer_getoverrun)
-SYSCALL_SPU(timer_delete)
-COMPAT_SYS_SPU(clock_settime)
-COMPAT_SYS_SPU(clock_gettime)
-COMPAT_SYS_SPU(clock_getres)
-COMPAT_SYS_SPU(clock_nanosleep)
-SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
-COMPAT_SYS_SPU(tgkill)
-COMPAT_SYS_SPU(utimes)
-COMPAT_SYS_SPU(statfs64)
-COMPAT_SYS_SPU(fstatfs64)
-SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
-PPC_SYS_SPU(rtas)
-OLDSYS(debug_setcontext)
-SYSCALL(ni_syscall)
-COMPAT_SYS(migrate_pages)
-COMPAT_SYS(mbind)
-COMPAT_SYS(get_mempolicy)
-COMPAT_SYS(set_mempolicy)
-COMPAT_SYS(mq_open)
-SYSCALL(mq_unlink)
-COMPAT_SYS(mq_timedsend)
-COMPAT_SYS(mq_timedreceive)
-COMPAT_SYS(mq_notify)
-COMPAT_SYS(mq_getsetattr)
-COMPAT_SYS(kexec_load)
-COMPAT_SYS(add_key)
-COMPAT_SYS(request_key)
-COMPAT_SYS(keyctl)
-COMPAT_SYS(waitid)
-COMPAT_SYS(ioprio_set)
-COMPAT_SYS(ioprio_get)
-SYSCALL(inotify_init)
-SYSCALL(inotify_add_watch)
-SYSCALL(inotify_rm_watch)
-SYSCALL(spu_run)
-SYSCALL(spu_create)
-COMPAT_SYS(pselect6)
-COMPAT_SYS(ppoll)
-SYSCALL_SPU(unshare)
-SYSCALL_SPU(splice)
-SYSCALL_SPU(tee)
-COMPAT_SYS_SPU(vmsplice)
-COMPAT_SYS_SPU(openat)
-SYSCALL_SPU(mkdirat)
-SYSCALL_SPU(mknodat)
-SYSCALL_SPU(fchownat)
-COMPAT_SYS_SPU(futimesat)
-SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
-SYSCALL_SPU(unlinkat)
-SYSCALL_SPU(renameat)
-SYSCALL_SPU(linkat)
-SYSCALL_SPU(symlinkat)
-SYSCALL_SPU(readlinkat)
-SYSCALL_SPU(fchmodat)
-SYSCALL_SPU(faccessat)
-COMPAT_SYS_SPU(get_robust_list)
-COMPAT_SYS_SPU(set_robust_list)
-COMPAT_SYS_SPU(move_pages)
-SYSCALL_SPU(getcpu)
-COMPAT_SYS(epoll_pwait)
-COMPAT_SYS_SPU(utimensat)
-COMPAT_SYS_SPU(signalfd)
-SYSCALL_SPU(timerfd_create)
-SYSCALL_SPU(eventfd)
-COMPAT_SYS_SPU(sync_file_range2)
-COMPAT_SYS(fallocate)
-SYSCALL(subpage_prot)
-COMPAT_SYS_SPU(timerfd_settime)
-COMPAT_SYS_SPU(timerfd_gettime)
-COMPAT_SYS_SPU(signalfd4)
-SYSCALL_SPU(eventfd2)
-SYSCALL_SPU(epoll_create1)
-SYSCALL_SPU(dup3)
-SYSCALL_SPU(pipe2)
-SYSCALL(inotify_init1)
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
deleted file mode 100644
index d6648c143322..000000000000
--- a/include/asm-powerpc/system.h
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- */
-#ifndef _ASM_POWERPC_SYSTEM_H
-#define _ASM_POWERPC_SYSTEM_H
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-#include <asm/hw_irq.h>
-
-/*
- * Memory barrier.
- * The sync instruction guarantees that all memory accesses initiated
- * by this processor have been performed (with respect to all other
- * mechanisms that access memory).  The eieio instruction is a barrier
- * providing an ordering (separately) for (a) cacheable stores and (b)
- * loads and stores to non-cacheable memory (e.g. I/O devices).
- *
- * mb() prevents loads and stores being reordered across this point.
- * rmb() prevents loads being reordered across this point.
- * wmb() prevents stores being reordered across this point.
- * read_barrier_depends() prevents data-dependent loads being reordered
- *      across this point (nop on PPC).
- *
- * We have to use the sync instructions for mb(), since lwsync doesn't
- * order loads with respect to previous stores.  Lwsync is fine for
- * rmb(), though. Note that rmb() actually uses a sync on 32-bit
- * architectures.
- *
- * For wmb(), we use sync since wmb is used in drivers to order
- * stores to system memory with respect to writes to the device.
- * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
- * on SMP since it is only used to order updates to system memory.
- */
-#define mb()   __asm__ __volatile__ ("sync" : : : "memory")
-#define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
-#define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
-#define read_barrier_depends()  do { } while(0)
-
-#define set_mb(var, value)      do { var = value; mb(); } while (0)
-
-#ifdef __KERNEL__
-#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
-#ifdef CONFIG_SMP
-
-#ifdef __SUBARCH_HAS_LWSYNC
-#    define SMPWMB      lwsync
-#else
-#    define SMPWMB      eieio
-#endif
-
-#define smp_mb()        mb()
-#define smp_rmb()       rmb()
-#define smp_wmb()       __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
-#define smp_read_barrier_depends()      read_barrier_depends()
-#else
-#define smp_mb()        barrier()
-#define smp_rmb()       barrier()
-#define smp_wmb()       barrier()
-#define smp_read_barrier_depends()      do { } while(0)
-#endif /* CONFIG_SMP */
-
-/*
- * This is a barrier which prevents following instructions from being
- * started until the value of the argument x is known.  For example, if
- * x is a variable loaded from memory, this prevents following
- * instructions from being executed until the load has been performed.
- */
-#define data_barrier(x) \
-        asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
-
-struct task_struct;
-struct pt_regs;
-
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-
-extern int (*__debugger)(struct pt_regs *regs);
-extern int (*__debugger_ipi)(struct pt_regs *regs);
-extern int (*__debugger_bpt)(struct pt_regs *regs);
-extern int (*__debugger_sstep)(struct pt_regs *regs);
-extern int (*__debugger_iabr_match)(struct pt_regs *regs);
-extern int (*__debugger_dabr_match)(struct pt_regs *regs);
-extern int (*__debugger_fault_handler)(struct pt_regs *regs);
-
-#define DEBUGGER_BOILERPLATE(__NAME) \
-static inline int __NAME(struct pt_regs *regs) \
-{ \
-        if (unlikely(__ ## __NAME)) \
-                return __ ## __NAME(regs); \
-        return 0; \
-}
-
-DEBUGGER_BOILERPLATE(debugger)
-DEBUGGER_BOILERPLATE(debugger_ipi)
-DEBUGGER_BOILERPLATE(debugger_bpt)
-DEBUGGER_BOILERPLATE(debugger_sstep)
-DEBUGGER_BOILERPLATE(debugger_iabr_match)
-DEBUGGER_BOILERPLATE(debugger_dabr_match)
-DEBUGGER_BOILERPLATE(debugger_fault_handler)
-
-#else
-static inline int debugger(struct pt_regs *regs) { return 0; }
-static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
-static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
-static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
-static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
-static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
-static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
-#endif
-
-extern int set_dabr(unsigned long dabr);
-extern void do_dabr(struct pt_regs *regs, unsigned long address,
-                    unsigned long error_code);
-extern void print_backtrace(unsigned long *);
-extern void show_regs(struct pt_regs * regs);
-extern void flush_instruction_cache(void);
-extern void hard_reset_now(void);
-extern void poweroff_now(void);
-
-#ifdef CONFIG_6xx
-extern long _get_L2CR(void);
-extern long _get_L3CR(void);
-extern void _set_L2CR(unsigned long);
-extern void _set_L3CR(unsigned long);
-#else
-#define _get_L2CR()     0L
-#define _get_L3CR()     0L
-#define _set_L2CR(val)  do { } while(0)
-#define _set_L3CR(val)  do { } while(0)
-#endif
-
-extern void via_cuda_init(void);
-extern void read_rtc_time(void);
-extern void pmac_find_display(void);
-extern void giveup_fpu(struct task_struct *);
-extern void disable_kernel_fp(void);
-extern void enable_kernel_fp(void);
-extern void flush_fp_to_thread(struct task_struct *);
-extern void enable_kernel_altivec(void);
-extern void giveup_altivec(struct task_struct *);
-extern void load_up_altivec(struct task_struct *);
-extern int emulate_altivec(struct pt_regs *);
-extern void __giveup_vsx(struct task_struct *);
-extern void giveup_vsx(struct task_struct *);
-extern void enable_kernel_spe(void);
-extern void giveup_spe(struct task_struct *);
-extern void load_up_spe(struct task_struct *);
-extern int fix_alignment(struct pt_regs *);
-extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
-extern void cvt_df(double *from, float *to, struct thread_struct *thread);
-
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ALTIVEC
-extern void flush_altivec_to_thread(struct task_struct *);
-#else
-static inline void flush_altivec_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-#ifdef CONFIG_VSX
-extern void flush_vsx_to_thread(struct task_struct *);
-#else
-static inline void flush_vsx_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-#ifdef CONFIG_SPE
-extern void flush_spe_to_thread(struct task_struct *);
-#else
-static inline void flush_spe_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-extern int call_rtas(const char *, int, int, unsigned long *, ...);
-extern void cacheable_memzero(void *p, unsigned int nb);
-extern void *cacheable_memcpy(void *, const void *, unsigned int);
-extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
-extern void bad_page_fault(struct pt_regs *, unsigned long, int);
-extern int die(const char *, struct pt_regs *, long);
-extern void _exception(int, struct pt_regs *, int, unsigned long);
-extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-#endif /* CONFIG_BOOKE_WDT */
-
-struct device_node;
-extern void note_scsi_host(struct device_node *, void *);
-
-extern struct task_struct *__switch_to(struct task_struct *,
-        struct task_struct *);
-#define switch_to(prev, next, last)     ((last) = __switch_to((prev), (next)))
-
-struct thread_struct;
-extern struct task_struct *_switch(struct thread_struct *prev,
-                                   struct thread_struct *next);
-
-extern unsigned int rtas_data;
-extern int mem_init_done;       /* set on boot once kmalloc can be called */
-extern int init_bootmem_done;   /* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
-extern unsigned long klimit;
-
-extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
-extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
-
-extern int powersave_nap;       /* set if nap mode can be used in idle loop */
-
-/*
- * Atomic exchange
- *
- * Changes the memory location '*ptr' to be val and returns
- * the previous value stored there.
- */
-static __always_inline unsigned long
-__xchg_u32(volatile void *p, unsigned long val)
-{
-        unsigned long prev;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%2 \n"
-        PPC405_ERR77(0,%2)
-"       stwcx.  %3,0,%2 \n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (prev), "+m" (*(volatile unsigned int *)p)
-        : "r" (p), "r" (val)
-        : "cc", "memory");
-
-        return prev;
-}
-
-/*
- * Atomic exchange
- *
- * Changes the memory location '*ptr' to be val and returns
- * the previous value stored there.
- */
-static __always_inline unsigned long
-__xchg_u32_local(volatile void *p, unsigned long val)
-{
-        unsigned long prev;
-
-        __asm__ __volatile__(
-"1:     lwarx   %0,0,%2 \n"
-        PPC405_ERR77(0,%2)
-"       stwcx.  %3,0,%2 \n\
-        bne-    1b"
-        : "=&r" (prev), "+m" (*(volatile unsigned int *)p)
-        : "r" (p), "r" (val)
-        : "cc", "memory");
-
-        return prev;
-}
-
-#ifdef CONFIG_PPC64
-static __always_inline unsigned long
-__xchg_u64(volatile void *p, unsigned long val)
-{
-        unsigned long prev;
-
-        __asm__ __volatile__(
-        LWSYNC_ON_SMP
-"1:     ldarx   %0,0,%2 \n"
-        PPC405_ERR77(0,%2)
-"       stdcx.  %3,0,%2 \n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        : "=&r" (prev), "+m" (*(volatile unsigned long *)p)
-        : "r" (p), "r" (val)
-        : "cc", "memory");
-
-        return prev;
-}
-
-static __always_inline unsigned long
-__xchg_u64_local(volatile void *p, unsigned long val)
-{
-        unsigned long prev;
-
-        __asm__ __volatile__(
-"1:     ldarx   %0,0,%2 \n"
-        PPC405_ERR77(0,%2)
-"       stdcx.  %3,0,%2 \n\
-        bne-    1b"
-        : "=&r" (prev), "+m" (*(volatile unsigned long *)p)
-        : "r" (p), "r" (val)
-        : "cc", "memory");
-
-        return prev;
-}
-#endif
-
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid xchg().
- */
-extern void __xchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-__xchg(volatile void *ptr, unsigned long x, unsigned int size)
-{
-        switch (size) {
-        case 4:
-                return __xchg_u32(ptr, x);
-#ifdef CONFIG_PPC64
-        case 8:
-                return __xchg_u64(ptr, x);
-#endif
-        }
-        __xchg_called_with_bad_pointer();
-        return x;
-}
-
-static __always_inline unsigned long
-__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
-{
-        switch (size) {
-        case 4:
-                return __xchg_u32_local(ptr, x);
-#ifdef CONFIG_PPC64
-        case 8:
-                return __xchg_u64_local(ptr, x);
-#endif
-        }
-        __xchg_called_with_bad_pointer();
-        return x;
-}
-#define xchg(ptr,x)                                                          \
-  ({                                                                         \
-     __typeof__(*(ptr)) _x_ = (x);                                           \
-     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
-  })
-
-#define xchg_local(ptr,x)                                                    \
-  ({                                                                         \
-     __typeof__(*(ptr)) _x_ = (x);                                           \
-     (__typeof__(*(ptr))) __xchg_local((ptr),                                \
-                (unsigned long)_x_, sizeof(*(ptr)));                         \
-  })
-
-/*
- * Compare and exchange - if *p == old, set it to new,
- * and return the old value of *p.
- */
-#define __HAVE_ARCH_CMPXCHG     1
-
-static __always_inline unsigned long
-__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
-{
-        unsigned int prev;
-
-        __asm__ __volatile__ (
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%2         # __cmpxchg_u32\n\
-        cmpw    0,%0,%3\n\
-        bne-    2f\n"
-        PPC405_ERR77(0,%2)
-"       stwcx.  %4,0,%2\n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        "\n\
-2:"
-        : "=&r" (prev), "+m" (*p)
-        : "r" (p), "r" (old), "r" (new)
-        : "cc", "memory");
-
-        return prev;
-}
-
-static __always_inline unsigned long
-__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
-                        unsigned long new)
-{
-        unsigned int prev;
-
-        __asm__ __volatile__ (
-"1:     lwarx   %0,0,%2         # __cmpxchg_u32\n\
-        cmpw    0,%0,%3\n\
-        bne-    2f\n"
-        PPC405_ERR77(0,%2)
-"       stwcx.  %4,0,%2\n\
-        bne-    1b"
-        "\n\
-2:"
-        : "=&r" (prev), "+m" (*p)
-        : "r" (p), "r" (old), "r" (new)
-        : "cc", "memory");
-
-        return prev;
-}
-
-#ifdef CONFIG_PPC64
-static __always_inline unsigned long
-__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
-{
-        unsigned long prev;
-
-        __asm__ __volatile__ (
-        LWSYNC_ON_SMP
-"1:     ldarx   %0,0,%2         # __cmpxchg_u64\n\
-        cmpd    0,%0,%3\n\
-        bne-    2f\n\
-        stdcx.  %4,0,%2\n\
-        bne-    1b"
-        ISYNC_ON_SMP
-        "\n\
-2:"
-        : "=&r" (prev), "+m" (*p)
-        : "r" (p), "r" (old), "r" (new)
-        : "cc", "memory");
-
-        return prev;
-}
-
-static __always_inline unsigned long
-__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
-                        unsigned long new)
-{
-        unsigned long prev;
-
-        __asm__ __volatile__ (
-"1:     ldarx   %0,0,%2         # __cmpxchg_u64\n\
-        cmpd    0,%0,%3\n\
-        bne-    2f\n\
-        stdcx.  %4,0,%2\n\
-        bne-    1b"
-        "\n\
-2:"
-        : "=&r" (prev), "+m" (*p)
-        : "r" (p), "r" (old), "r" (new)
-        : "cc", "memory");
-
-        return prev;
-}
-#endif
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
-          unsigned int size)
-{
-        switch (size) {
-        case 4:
-                return __cmpxchg_u32(ptr, old, new);
-#ifdef CONFIG_PPC64
-        case 8:
-                return __cmpxchg_u64(ptr, old, new);
-#endif
-        }
-        __cmpxchg_called_with_bad_pointer();
-        return old;
-}
-
-static __always_inline unsigned long
-__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
-          unsigned int size)
-{
-        switch (size) {
-        case 4:
-                return __cmpxchg_u32_local(ptr, old, new);
-#ifdef CONFIG_PPC64
-        case 8:
-                return __cmpxchg_u64_local(ptr, old, new);
-#endif
-        }
-        __cmpxchg_called_with_bad_pointer();
-        return old;
-}
-
-#define cmpxchg(ptr, o, n)                                               \
-  ({                                                                     \
-     __typeof__(*(ptr)) _o_ = (o);                                       \
-     __typeof__(*(ptr)) _n_ = (n);                                       \
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,           \
-                                    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-
-#define cmpxchg_local(ptr, o, n)                                         \
-  ({                                                                     \
-     __typeof__(*(ptr)) _o_ = (o);                                       \
-     __typeof__(*(ptr)) _n_ = (n);                                       \
-     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,     \
-                                    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-#ifdef CONFIG_PPC64
-/*
- * We handle most unaligned accesses in hardware. On the other hand 
- * unaligned DMA can be very expensive on some ppc64 IO chips (it does
- * powers of 2 writes until it reaches sufficient alignment).
- *
- * Based on this we disable the IP header alignment in network drivers.
- * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
- * cacheline alignment of buffers.
- */
-#define NET_IP_ALIGN    0
-#define NET_SKB_PAD     L1_CACHE_BYTES
-
-#define cmpxchg64(ptr, o, n)                                            \
-  ({                                                                    \
-        BUILD_BUG_ON(sizeof(*(ptr)) != 8);                              \
-        cmpxchg((ptr), (o), (n));                                       \
-  })
-#define cmpxchg64_local(ptr, o, n)                                      \
-  ({                                                                    \
-        BUILD_BUG_ON(sizeof(*(ptr)) != 8);                              \
-        cmpxchg_local((ptr), (o), (n));                                 \
-  })
-#else
-#include <asm-generic/cmpxchg-local.h>
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-#endif
-
-#define arch_align_stack(x) (x)
-
-/* Used in very early kernel initialization. */
-extern unsigned long reloc_offset(void);
-extern unsigned long add_reloc_offset(unsigned long);
-extern void reloc_got2(unsigned long);
-
-#define PTRRELOC(x)     ((typeof(x)) add_reloc_offset((unsigned long)(x)))
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void account_system_vtime(struct task_struct *);
-#endif
-
-extern struct dentry *powerpc_debugfs_root;
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SYSTEM_H */
diff --git a/include/asm-powerpc/tce.h b/include/asm-powerpc/tce.h
deleted file mode 100644
index f663634cccc9..000000000000
--- a/include/asm-powerpc/tce.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
- * Rewrite, cleanup:
- * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_TCE_H
-#define _ASM_POWERPC_TCE_H
-#ifdef __KERNEL__
-
-#include <asm/iommu.h>
-
-/*
- * Tces come in two formats, one for the virtual bus and a different
- * format for PCI
- */
-#define TCE_VB  0
-#define TCE_PCI 1
-
-/* TCE page size is 4096 bytes (1 << 12) */
-
-#define TCE_SHIFT       12
-#define TCE_PAGE_SIZE   (1 << TCE_SHIFT)
-
-#define TCE_ENTRY_SIZE          8               /* each TCE is 64 bits */
-
-#define TCE_RPN_MASK            0xfffffffffful  /* 40-bit RPN (4K pages) */
-#define TCE_RPN_SHIFT           12
-#define TCE_VALID               0x800           /* TCE valid */
-#define TCE_ALLIO               0x400           /* TCE valid for all lpars */
-#define TCE_PCI_WRITE           0x2             /* write from PCI allowed */
-#define TCE_PCI_READ            0x1             /* read from PCI allowed */
-#define TCE_VB_WRITE            0x1             /* write from VB allowed */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_TCE_H */
diff --git a/include/asm-powerpc/termbits.h b/include/asm-powerpc/termbits.h
deleted file mode 100644
index 6698188ca550..000000000000
--- a/include/asm-powerpc/termbits.h
+++ /dev/null
@@ -1,209 +0,0 @@
-#ifndef _ASM_POWERPC_TERMBITS_H
-#define _ASM_POWERPC_TERMBITS_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-typedef unsigned char   cc_t;
-typedef unsigned int    speed_t;
-typedef unsigned int    tcflag_t;
-
-/*
- * termios type and macro definitions.  Be careful about adding stuff
- * to this file since it's used in GNU libc and there are strict rules
- * concerning namespace pollution.
- */
-
-#define NCCS 19
-struct termios {
-        tcflag_t c_iflag;               /* input mode flags */
-        tcflag_t c_oflag;               /* output mode flags */
-        tcflag_t c_cflag;               /* control mode flags */
-        tcflag_t c_lflag;               /* local mode flags */
-        cc_t c_cc[NCCS];                /* control characters */
-        cc_t c_line;                    /* line discipline (== c_cc[19]) */
-        speed_t c_ispeed;               /* input speed */
-        speed_t c_ospeed;               /* output speed */
-};
-
-/* For PowerPC the termios and ktermios are the same */
-
-struct ktermios {
-        tcflag_t c_iflag;               /* input mode flags */
-        tcflag_t c_oflag;               /* output mode flags */
-        tcflag_t c_cflag;               /* control mode flags */
-        tcflag_t c_lflag;               /* local mode flags */
-        cc_t c_cc[NCCS];                /* control characters */
-        cc_t c_line;                    /* line discipline (== c_cc[19]) */
-        speed_t c_ispeed;               /* input speed */
-        speed_t c_ospeed;               /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR            0
-#define VQUIT            1
-#define VERASE           2
-#define VKILL            3
-#define VEOF             4
-#define VMIN             5
-#define VEOL             6
-#define VTIME            7
-#define VEOL2            8
-#define VSWTC            9
-#define VWERASE         10
-#define VREPRINT        11
-#define VSUSP           12
-#define VSTART          13
-#define VSTOP           14
-#define VLNEXT          15
-#define VDISCARD        16
-
-/* c_iflag bits */
-#define IGNBRK  0000001
-#define BRKINT  0000002
-#define IGNPAR  0000004
-#define PARMRK  0000010
-#define INPCK   0000020
-#define ISTRIP  0000040
-#define INLCR   0000100
-#define IGNCR   0000200
-#define ICRNL   0000400
-#define IXON    0001000
-#define IXOFF   0002000
-#define IXANY   0004000
-#define IUCLC   0010000
-#define IMAXBEL 0020000
-#define IUTF8   0040000
-
-/* c_oflag bits */
-#define OPOST   0000001
-#define ONLCR   0000002
-#define OLCUC   0000004
-
-#define OCRNL   0000010
-#define ONOCR   0000020
-#define ONLRET  0000040
-
-#define OFILL   00000100
-#define OFDEL   00000200
-#define NLDLY   00001400
-#define   NL0   00000000
-#define   NL1   00000400
-#define   NL2   00001000
-#define   NL3   00001400
-#define TABDLY  00006000
-#define   TAB0  00000000
-#define   TAB1  00002000
-#define   TAB2  00004000
-#define   TAB3  00006000
-#define   XTABS 00006000        /* required by POSIX to == TAB3 */
-#define CRDLY   00030000
-#define   CR0   00000000
-#define   CR1   00010000
-#define   CR2   00020000
-#define   CR3   00030000
-#define FFDLY   00040000
-#define   FF0   00000000
-#define   FF1   00040000
-#define BSDLY   00100000
-#define   BS0   00000000
-#define   BS1   00100000
-#define VTDLY   00200000
-#define   VT0   00000000
-#define   VT1   00200000
-
-/* c_cflag bit meaning */
-#define CBAUD   0000377
-#define  B0     0000000         /* hang up */
-#define  B50    0000001
-#define  B75    0000002
-#define  B110   0000003
-#define  B134   0000004
-#define  B150   0000005
-#define  B200   0000006
-#define  B300   0000007
-#define  B600   0000010
-#define  B1200  0000011
-#define  B1800  0000012
-#define  B2400  0000013
-#define  B4800  0000014
-#define  B9600  0000015
-#define  B19200 0000016
-#define  B38400 0000017
-#define  EXTA   B19200
-#define  EXTB   B38400
-#define  CBAUDEX 0000000
-#define  B57600   00020
-#define  B115200  00021
-#define  B230400  00022
-#define  B460800  00023
-#define  B500000  00024
-#define  B576000  00025
-#define  B921600  00026
-#define B1000000  00027
-#define B1152000  00030
-#define B1500000  00031
-#define B2000000  00032
-#define B2500000  00033
-#define B3000000  00034
-#define B3500000  00035
-#define B4000000  00036
-#define   BOTHER  00037
-
-#define CIBAUD  077600000
-#define IBSHIFT 16              /* Shift from CBAUD to CIBAUD */
-
-#define CSIZE   00001400
-#define   CS5   00000000
-#define   CS6   00000400
-#define   CS7   00001000
-#define   CS8   00001400
-
-#define CSTOPB  00002000
-#define CREAD   00004000
-#define PARENB  00010000
-#define PARODD  00020000
-#define HUPCL   00040000
-
-#define CLOCAL  00100000
-#define CMSPAR    010000000000          /* mark or space (stick) parity */
-#define CRTSCTS   020000000000          /* flow control */
-
-/* c_lflag bits */
-#define ISIG    0x00000080
-#define ICANON  0x00000100
-#define XCASE   0x00004000
-#define ECHO    0x00000008
-#define ECHOE   0x00000002
-#define ECHOK   0x00000004
-#define ECHONL  0x00000010
-#define NOFLSH  0x80000000
-#define TOSTOP  0x00400000
-#define ECHOCTL 0x00000040
-#define ECHOPRT 0x00000020
-#define ECHOKE  0x00000001
-#define FLUSHO  0x00800000
-#define PENDIN  0x20000000
-#define IEXTEN  0x00000400
-
-/* Values for the ACTION argument to `tcflow'.  */
-#define TCOOFF          0
-#define TCOON           1
-#define TCIOFF          2
-#define TCION           3
-
-/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
-#define TCIFLUSH        0
-#define TCOFLUSH        1
-#define TCIOFLUSH       2
-
-/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
-#define TCSANOW         0
-#define TCSADRAIN       1
-#define TCSAFLUSH       2
-
-#endif  /* _ASM_POWERPC_TERMBITS_H */
diff --git a/include/asm-powerpc/termios.h b/include/asm-powerpc/termios.h
deleted file mode 100644
index 2c14fea07c8a..000000000000
--- a/include/asm-powerpc/termios.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef _ASM_POWERPC_TERMIOS_H
-#define _ASM_POWERPC_TERMIOS_H
-
-/*
- * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
- * fields have been reordered so that termio & termios share the
- * common subset in the same order (for brain dead programs that don't
- * know or care about the differences).
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/ioctls.h>
-#include <asm/termbits.h>
-
-struct sgttyb {
-        char    sg_ispeed;
-        char    sg_ospeed;
-        char    sg_erase;
-        char    sg_kill;
-        short   sg_flags;
-};
-
-struct tchars {
-        char    t_intrc;
-        char    t_quitc;
-        char    t_startc;
-        char    t_stopc;
-        char    t_eofc;
-        char    t_brkc;
-};
-
-struct ltchars {
-        char    t_suspc;
-        char    t_dsuspc;
-        char    t_rprntc;
-        char    t_flushc;
-        char    t_werasc;
-        char    t_lnextc;
-};
-
-struct winsize {
-        unsigned short ws_row;
-        unsigned short ws_col;
-        unsigned short ws_xpixel;
-        unsigned short ws_ypixel;
-};
-
-#define NCC 10
-struct termio {
-        unsigned short c_iflag;         /* input mode flags */
-        unsigned short c_oflag;         /* output mode flags */
-        unsigned short c_cflag;         /* control mode flags */
-        unsigned short c_lflag;         /* local mode flags */
-        unsigned char c_line;           /* line discipline */
-        unsigned char c_cc[NCC];        /* control characters */
-};
-
-/* c_cc characters */
-#define _VINTR  0
-#define _VQUIT  1
-#define _VERASE 2
-#define _VKILL  3
-#define _VEOF   4
-#define _VMIN   5
-#define _VEOL   6
-#define _VTIME  7
-#define _VEOL2  8
-#define _VSWTC  9
-
-#ifdef __KERNEL__
-/*                   ^C  ^\ del  ^U  ^D   1   0   0   0   0  ^W  ^R  ^Z  ^Q  ^S  ^V  ^U  */
-#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" 
-#endif
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios.h>
-
-#endif  /* __KERNEL__ */
-
-#endif  /* _ASM_POWERPC_TERMIOS_H */
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
deleted file mode 100644
index 9665a26a253a..000000000000
--- a/include/asm-powerpc/thread_info.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/* thread_info.h: PowerPC low-level thread information
- * adapted from the i386 version by Paul Mackerras
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_POWERPC_THREAD_INFO_H
-#define _ASM_POWERPC_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-/* We have 8k stacks on ppc32 and 16k on ppc64 */
-
-#ifdef CONFIG_PPC64
-#define THREAD_SHIFT            14
-#else
-#define THREAD_SHIFT            13
-#endif
-
-#define THREAD_SIZE             (1 << THREAD_SHIFT)
-
-#ifndef __ASSEMBLY__
-#include <linux/cache.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <linux/stringify.h>
-
-/*
- * low level task data.
- */
-struct thread_info {
-        struct task_struct *task;               /* main task structure */
-        struct exec_domain *exec_domain;        /* execution domain */
-        int             cpu;                    /* cpu we're on */
-        int             preempt_count;          /* 0 => preemptable,
-                                                   <0 => BUG */
-        struct restart_block restart_block;
-        unsigned long   local_flags;            /* private flags for thread */
-
-        /* low level flags - has atomic operations done on it */
-        unsigned long   flags ____cacheline_aligned_in_smp;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#define INIT_THREAD_INFO(tsk)                   \
-{                                               \
-        .task =         &tsk,                   \
-        .exec_domain =  &default_exec_domain,   \
-        .cpu =          0,                      \
-        .preempt_count = 1,                     \
-        .restart_block = {                      \
-                .fn = do_no_restart_syscall,    \
-        },                                      \
-        .flags =        0,                      \
-}
-
-#define init_thread_info        (init_thread_union.thread_info)
-#define init_stack              (init_thread_union.stack)
-
-/* thread information allocation */
-
-#if THREAD_SHIFT >= PAGE_SHIFT
-
-#define THREAD_SIZE_ORDER       (THREAD_SHIFT - PAGE_SHIFT)
-
-#else /* THREAD_SHIFT < PAGE_SHIFT */
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
-extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
-extern void free_thread_info(struct thread_info *ti);
-
-#endif /* THREAD_SHIFT < PAGE_SHIFT */
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-        register unsigned long sp asm("r1");
-
-        /* gcc4, at least, is smart enough to turn this into a single
-         * rlwinm for ppc32 and clrrdi for ppc64 */
-        return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
-}
-
-#endif /* __ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE          0x10000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
-#define TIF_SIGPENDING          1       /* signal pending */
-#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
-                                           TIF_NEED_RESCHED */
-#define TIF_32BIT               4       /* 32 bit binary */
-#define TIF_PERFMON_WORK        5       /* work for pfm_handle_work() */
-#define TIF_PERFMON_CTXSW       6       /* perfmon needs ctxsw calls */
-#define TIF_SYSCALL_AUDIT       7       /* syscall auditing active */
-#define TIF_SINGLESTEP          8       /* singlestepping active */
-#define TIF_MEMDIE              9
-#define TIF_SECCOMP             10      /* secure computing */
-#define TIF_RESTOREALL          11      /* Restore all regs (implies NOERROR) */
-#define TIF_NOERROR             12      /* Force successful syscall return */
-#define TIF_NOTIFY_RESUME       13      /* callback before returning to user */
-#define TIF_FREEZE              14      /* Freezing for suspend */
-#define TIF_RUNLATCH            15      /* Is the runlatch enabled? */
-#define TIF_ABI_PENDING         16      /* 32/64 bit switch needed */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
-#define _TIF_32BIT              (1<<TIF_32BIT)
-#define _TIF_PERFMON_WORK       (1<<TIF_PERFMON_WORK)
-#define _TIF_PERFMON_CTXSW      (1<<TIF_PERFMON_CTXSW)
-#define _TIF_SYSCALL_AUDIT      (1<<TIF_SYSCALL_AUDIT)
-#define _TIF_SINGLESTEP         (1<<TIF_SINGLESTEP)
-#define _TIF_SECCOMP            (1<<TIF_SECCOMP)
-#define _TIF_RESTOREALL         (1<<TIF_RESTOREALL)
-#define _TIF_NOERROR            (1<<TIF_NOERROR)
-#define _TIF_NOTIFY_RESUME      (1<<TIF_NOTIFY_RESUME)
-#define _TIF_FREEZE             (1<<TIF_FREEZE)
-#define _TIF_RUNLATCH           (1<<TIF_RUNLATCH)
-#define _TIF_ABI_PENDING        (1<<TIF_ABI_PENDING)
-#define _TIF_SYSCALL_T_OR_A     (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
-
-#define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-                                 _TIF_NOTIFY_RESUME)
-#define _TIF_PERSYSCALL_MASK    (_TIF_RESTOREALL|_TIF_NOERROR)
-
-/* Bits in local_flags */
-/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
-#define TLF_NAPPING             0       /* idle thread enabled NAP mode */
-#define TLF_SLEEPING            1       /* suspend code enabled SLEEP mode */
-#define TLF_RESTORE_SIGMASK     2       /* Restore signal mask in do_signal */
-
-#define _TLF_NAPPING            (1 << TLF_NAPPING)
-#define _TLF_SLEEPING           (1 << TLF_SLEEPING)
-#define _TLF_RESTORE_SIGMASK    (1 << TLF_RESTORE_SIGMASK)
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK        1
-static inline void set_restore_sigmask(void)
-{
-        struct thread_info *ti = current_thread_info();
-        ti->local_flags |= _TLF_RESTORE_SIGMASK;
-        set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif  /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_THREAD_INFO_H */
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
deleted file mode 100644
index febd581ec9b0..000000000000
--- a/include/asm-powerpc/time.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Common time prototypes and such for all ppc machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __POWERPC_TIME_H
-#define __POWERPC_TIME_H
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#include <linux/percpu.h>
-
-#include <asm/processor.h>
-#ifdef CONFIG_PPC_ISERIES
-#include <asm/paca.h>
-#include <asm/firmware.h>
-#include <asm/iseries/hv_call.h>
-#endif
-
-/* time.c */
-extern unsigned long tb_ticks_per_jiffy;
-extern unsigned long tb_ticks_per_usec;
-extern unsigned long tb_ticks_per_sec;
-extern u64 tb_to_xs;
-extern unsigned      tb_to_us;
-
-struct rtc_time;
-extern void to_tm(int tim, struct rtc_time * tm);
-extern void GregorianDay(struct rtc_time *tm);
-extern time_t last_rtc_update;
-
-extern void generic_calibrate_decr(void);
-extern void wakeup_decrementer(void);
-extern void snapshot_timebase(void);
-
-extern void set_dec_cpu6(unsigned int val);
-
-/* Some sane defaults: 125 MHz timebase, 1GHz processor */
-extern unsigned long ppc_proc_freq;
-#define DEFAULT_PROC_FREQ       (DEFAULT_TB_FREQ * 8)
-extern unsigned long ppc_tb_freq;
-#define DEFAULT_TB_FREQ         125000000UL
-
-/*
- * By putting all of this stuff into a single struct we 
- * reduce the number of cache lines touched by do_gettimeofday.
- * Both by collecting all of the data in one cache line and
- * by touching only one TOC entry on ppc64.
- */
-struct gettimeofday_vars {
-        u64 tb_to_xs;
-        u64 stamp_xsec;
-        u64 tb_orig_stamp;
-};
-
-struct gettimeofday_struct {
-        unsigned long tb_ticks_per_sec;
-        struct gettimeofday_vars vars[2];
-        struct gettimeofday_vars * volatile varp;
-        unsigned      var_idx;
-        unsigned      tb_to_us;
-};
-
-struct div_result {
-        u64 result_high;
-        u64 result_low;
-};
-
-/* Accessor functions for the timebase (RTC on 601) registers. */
-/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
-#ifdef CONFIG_6xx
-#define __USE_RTC()     (!cpu_has_feature(CPU_FTR_USE_TB))
-#else
-#define __USE_RTC()     0
-#endif
-
-#ifdef CONFIG_PPC64
-
-/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */
-#define get_tbl         get_tb
-
-#else
-
-static inline unsigned long get_tbl(void)
-{
-#if defined(CONFIG_403GCX)
-        unsigned long tbl;
-        asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
-        return tbl;
-#else
-        return mftbl();
-#endif
-}
-
-static inline unsigned int get_tbu(void)
-{
-#ifdef CONFIG_403GCX
-        unsigned int tbu;
-        asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
-        return tbu;
-#else
-        return mftbu();
-#endif
-}
-#endif /* !CONFIG_PPC64 */
-
-static inline unsigned int get_rtcl(void)
-{
-        unsigned int rtcl;
-
-        asm volatile("mfrtcl %0" : "=r" (rtcl));
-        return rtcl;
-}
-
-static inline u64 get_rtc(void)
-{
-        unsigned int hi, lo, hi2;
-
-        do {
-                asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2"
-                             : "=r" (hi), "=r" (lo), "=r" (hi2));
-        } while (hi2 != hi);
-        return (u64)hi * 1000000000 + lo;
-}
-
-#ifdef CONFIG_PPC64
-static inline u64 get_tb(void)
-{
-        return mftb();
-}
-#else /* CONFIG_PPC64 */
-static inline u64 get_tb(void)
-{
-        unsigned int tbhi, tblo, tbhi2;
-
-        do {
-                tbhi = get_tbu();
-                tblo = get_tbl();
-                tbhi2 = get_tbu();
-        } while (tbhi != tbhi2);
-
-        return ((u64)tbhi << 32) | tblo;
-}
-#endif /* !CONFIG_PPC64 */
-
-static inline u64 get_tb_or_rtc(void)
-{
-        return __USE_RTC() ? get_rtc() : get_tb();
-}
-
-static inline void set_tb(unsigned int upper, unsigned int lower)
-{
-        mtspr(SPRN_TBWL, 0);
-        mtspr(SPRN_TBWU, upper);
-        mtspr(SPRN_TBWL, lower);
-}
-
-/* Accessor functions for the decrementer register.
- * The 4xx doesn't even have a decrementer.  I tried to use the
- * generic timer interrupt code, which seems OK, with the 4xx PIT
- * in auto-reload mode.  The problem is PIT stops counting when it
- * hits zero.  If it would wrap, we could use it just like a decrementer.
- */
-static inline unsigned int get_dec(void)
-{
-#if defined(CONFIG_40x)
-        return (mfspr(SPRN_PIT));
-#else
-        return (mfspr(SPRN_DEC));
-#endif
-}
-
-/*
- * Note: Book E and 4xx processors differ from other PowerPC processors
- * in when the decrementer generates its interrupt: on the 1 to 0
- * transition for Book E/4xx, but on the 0 to -1 transition for others.
- */
-static inline void set_dec(int val)
-{
-#if defined(CONFIG_40x)
-        mtspr(SPRN_PIT, val);
-#elif defined(CONFIG_8xx_CPU6)
-        set_dec_cpu6(val - 1);
-#else
-#ifndef CONFIG_BOOKE
-        --val;
-#endif
-#ifdef CONFIG_PPC_ISERIES
-        if (firmware_has_feature(FW_FEATURE_ISERIES) &&
-                        get_lppaca()->shared_proc) {
-                get_lppaca()->virtual_decr = val;
-                if (get_dec() > val)
-                        HvCall_setVirtualDecr();
-                return;
-        }
-#endif
-        mtspr(SPRN_DEC, val);
-#endif /* not 40x or 8xx_CPU6 */
-}
-
-static inline unsigned long tb_ticks_since(unsigned long tstamp)
-{
-        if (__USE_RTC()) {
-                int delta = get_rtcl() - (unsigned int) tstamp;
-                return delta < 0 ? delta + 1000000000 : delta;
-        }
-        return get_tbl() - tstamp;
-}
-
-#define mulhwu(x,y) \
-({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
-#ifdef CONFIG_PPC64
-#define mulhdu(x,y) \
-({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-#else
-extern u64 mulhdu(u64, u64);
-#endif
-
-extern void smp_space_timers(unsigned int);
-
-extern unsigned mulhwu_scale_factor(unsigned, unsigned);
-extern void div128_by_32(u64 dividend_high, u64 dividend_low,
-                         unsigned divisor, struct div_result *dr);
-
-/* Used to store Processor Utilization register (purr) values */
-
-struct cpu_usage {
-        u64 current_tb;  /* Holds the current purr register values */
-};
-
-DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
-
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING)
-extern void calculate_steal_time(void);
-extern void snapshot_timebases(void);
-#define account_process_vtime(tsk)              account_process_tick(tsk, 0)
-#else
-#define calculate_steal_time()                  do { } while (0)
-#define snapshot_timebases()                    do { } while (0)
-#define account_process_vtime(tsk)              do { } while (0)
-#endif
-
-extern void secondary_cpu_time_init(void);
-extern void iSeries_time_init_early(void);
-
-#endif /* __KERNEL__ */
-#endif /* __POWERPC_TIME_H */
diff --git a/include/asm-powerpc/timex.h b/include/asm-powerpc/timex.h
deleted file mode 100644
index c55e14f7ef44..000000000000
--- a/include/asm-powerpc/timex.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _ASM_POWERPC_TIMEX_H
-#define _ASM_POWERPC_TIMEX_H
-
-#ifdef __KERNEL__
-
-/*
- * PowerPC architecture timex specifications
- */
-
-#include <asm/cputable.h>
-#include <asm/reg.h>
-
-#define CLOCK_TICK_RATE 1024000 /* Underlying HZ */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
-#ifdef __powerpc64__
-        return mftb();
-#else
-        cycles_t ret;
-
-        /*
-         * For the "cycle" counter we use the timebase lower half.
-         * Currently only used on SMP.
-         */
-
-        ret = 0;
-
-        __asm__ __volatile__(
-                "97:    mftb %0\n"
-                "99:\n"
-                ".section __ftr_fixup,\"a\"\n"
-                ".align 2\n"
-                "98:\n"
-                "       .long %1\n"
-                "       .long 0\n"
-                "       .long 97b-98b\n"
-                "       .long 99b-98b\n"
-                "       .long 0\n"
-                "       .long 0\n"
-                ".previous"
-                : "=r" (ret) : "i" (CPU_FTR_601));
-        return ret;
-#endif
-}
-
-#endif  /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_TIMEX_H */
diff --git a/include/asm-powerpc/tlb.h b/include/asm-powerpc/tlb.h
deleted file mode 100644
index e20ff7541f36..000000000000
--- a/include/asm-powerpc/tlb.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *      TLB shootdown specifics for powerpc
- *
- * Copyright (C) 2002 Anton Blanchard, IBM Corp.
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_TLB_H
-#define _ASM_POWERPC_TLB_H
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <asm/pgtable.h>
-#endif
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#ifndef __powerpc64__
-#include <asm/page.h>
-#include <asm/mmu.h>
-#endif
-
-#include <linux/pagemap.h>
-
-struct mmu_gather;
-
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma)   do { } while (0)
-
-#if !defined(CONFIG_PPC_STD_MMU)
-
-#define tlb_flush(tlb)                  flush_tlb_mm((tlb)->mm)
-
-#elif defined(__powerpc64__)
-
-extern void pte_free_finish(void);
-
-static inline void tlb_flush(struct mmu_gather *tlb)
-{
-        struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
-
-        /* If there's a TLB batch pending, then we must flush it because the
-         * pages are going to be freed and we really don't want to have a CPU
-         * access a freed page because it has a stale TLB
-         */
-        if (tlbbatch->index)
-                __flush_tlb_pending(tlbbatch);
-
-        pte_free_finish();
-}
-
-#else
-
-extern void tlb_flush(struct mmu_gather *tlb);
-
-#endif
-
-/* Get the generic bits... */
-#include <asm-generic/tlb.h>
-
-#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
-
-#else
-extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
-                             unsigned long address);
-
-static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
-                                        unsigned long address)
-{
-        if (pte_val(*ptep) & _PAGE_HASHPTE)
-                flush_hash_entry(tlb->mm, ptep, address);
-}
-
-#endif
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_TLB_H */
diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h
deleted file mode 100644
index 361cd5c7a32b..000000000000
--- a/include/asm-powerpc/tlbflush.h
+++ /dev/null
@@ -1,166 +0,0 @@
-#ifndef _ASM_POWERPC_TLBFLUSH_H
-#define _ASM_POWERPC_TLBFLUSH_H
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#ifdef __KERNEL__
-
-#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
-/*
- * TLB flushing for software loaded TLB chips
- *
- * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
- * flush_tlb_kernel_range are best implemented as tlbia vs
- * specific tlbie's
- */
-
-#include <linux/mm.h>
-
-extern void _tlbie(unsigned long address, unsigned int pid);
-
-#if defined(CONFIG_40x) || defined(CONFIG_8xx)
-#define _tlbia()        asm volatile ("tlbia; sync" : : : "memory")
-#else /* CONFIG_44x || CONFIG_FSL_BOOKE */
-extern void _tlbia(void);
-#endif
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-        _tlbia();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-                                  unsigned long vmaddr)
-{
-        _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
-}
-
-static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
-                                         unsigned long vmaddr)
-{
-        _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-                                   unsigned long start, unsigned long end)
-{
-        _tlbia();
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-                                          unsigned long end)
-{
-        _tlbia();
-}
-
-#elif defined(CONFIG_PPC32)
-/*
- * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx
- */
-extern void _tlbie(unsigned long address);
-extern void _tlbia(void);
-
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
-extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-                            unsigned long end);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-
-#else
-/*
- * TLB flushing for 64-bit has-MMU CPUs
- */
-
-#include <linux/percpu.h>
-#include <asm/page.h>
-
-#define PPC64_TLB_BATCH_NR 192
-
-struct ppc64_tlb_batch {
-        int                     active;
-        unsigned long           index;
-        struct mm_struct        *mm;
-        real_pte_t              pte[PPC64_TLB_BATCH_NR];
-        unsigned long           vaddr[PPC64_TLB_BATCH_NR];
-        unsigned int            psize;
-        int                     ssize;
-};
-DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
-
-extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
-
-extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
-                            pte_t *ptep, unsigned long pte, int huge);
-
-#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
-
-static inline void arch_enter_lazy_mmu_mode(void)
-{
-        struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-        batch->active = 1;
-}
-
-static inline void arch_leave_lazy_mmu_mode(void)
-{
-        struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-        if (batch->index)
-                __flush_tlb_pending(batch);
-        batch->active = 0;
-}
-
-#define arch_flush_lazy_mmu_mode()      do {} while (0)
-
-
-extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
-                            int ssize, int local);
-extern void flush_hash_range(unsigned long number, int local);
-
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-                                  unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
-                                         unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-                                   unsigned long start, unsigned long end)
-{
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-                                          unsigned long end)
-{
-}
-
-/* Private function for use by PCI IO mapping code */
-extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
-                                     unsigned long end);
-
-
-#endif
-
-#endif /*__KERNEL__ */
-#endif /* _ASM_POWERPC_TLBFLUSH_H */
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
deleted file mode 100644
index c32da6f97999..000000000000
--- a/include/asm-powerpc/topology.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _ASM_POWERPC_TOPOLOGY_H
-#define _ASM_POWERPC_TOPOLOGY_H
-#ifdef __KERNEL__
-
-
-struct sys_device;
-struct device_node;
-
-#ifdef CONFIG_NUMA
-
-#include <asm/mmzone.h>
-
-static inline int cpu_to_node(int cpu)
-{
-        return numa_cpu_lookup_table[cpu];
-}
-
-#define parent_node(node)       (node)
-
-static inline cpumask_t node_to_cpumask(int node)
-{
-        return numa_cpumask_lookup_table[node];
-}
-
-static inline int node_to_first_cpu(int node)
-{
-        cpumask_t tmp;
-        tmp = node_to_cpumask(node);
-        return first_cpu(tmp);
-}
-
-int of_node_to_nid(struct device_node *device);
-
-struct pci_bus;
-#ifdef CONFIG_PCI
-extern int pcibus_to_node(struct pci_bus *bus);
-#else
-static inline int pcibus_to_node(struct pci_bus *bus)
-{
-        return -1;
-}
-#endif
-
-#define pcibus_to_cpumask(bus)  (pcibus_to_node(bus) == -1 ? \
-                                        CPU_MASK_ALL : \
-                                        node_to_cpumask(pcibus_to_node(bus)) \
-                                )
-
-/* sched_domains SD_NODE_INIT for PPC64 machines */
-#define SD_NODE_INIT (struct sched_domain) {            \
-        .span                   = CPU_MASK_NONE,        \
-        .parent                 = NULL,                 \
-        .child                  = NULL,                 \
-        .groups                 = NULL,                 \
-        .min_interval           = 8,                    \
-        .max_interval           = 32,                   \
-        .busy_factor            = 32,                   \
-        .imbalance_pct          = 125,                  \
-        .cache_nice_tries       = 1,                    \
-        .busy_idx               = 3,                    \
-        .idle_idx               = 1,                    \
-        .newidle_idx            = 2,                    \
-        .wake_idx               = 1,                    \
-        .flags                  = SD_LOAD_BALANCE       \
-                                | SD_BALANCE_EXEC       \
-                                | SD_BALANCE_NEWIDLE    \
-                                | SD_WAKE_IDLE          \
-                                | SD_SERIALIZE          \
-                                | SD_WAKE_BALANCE,      \
-        .last_balance           = jiffies,              \
-        .balance_interval       = 1,                    \
-        .nr_balance_failed      = 0,                    \
-}
-
-extern void __init dump_numa_cpu_topology(void);
-
-extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
-extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
-
-#else
-
-static inline int of_node_to_nid(struct device_node *device)
-{
-        return 0;
-}
-
-static inline void dump_numa_cpu_topology(void) {}
-
-static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
-{
-        return 0;
-}
-
-static inline void sysfs_remove_device_from_node(struct sys_device *dev,
-                                                int nid)
-{
-}
-
-#endif /* CONFIG_NUMA */
-
-#include <asm-generic/topology.h>
-
-#ifdef CONFIG_SMP
-#include <asm/cputable.h>
-#define smt_capable()           (cpu_has_feature(CPU_FTR_SMT))
-
-#ifdef CONFIG_PPC64
-#include <asm/smp.h>
-
-#define topology_thread_siblings(cpu)   (per_cpu(cpu_sibling_map, cpu))
-#define topology_core_siblings(cpu)     (per_cpu(cpu_core_map, cpu))
-#define topology_core_id(cpu)           (cpu_to_core_id(cpu))
-#endif
-#endif
-
-#endif /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_TOPOLOGY_H */
diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h
deleted file mode 100644
index f8b60793b7a9..000000000000
--- a/include/asm-powerpc/tsi108.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * common routine and memory layout for Tundra TSI108(Grendel) host bridge
- * memory controller.
- *
- * Author: Jacob Pan (jacob.pan@freescale.com)
- *         Alex Bounine (alexandreb@tundra.com)
- *
- * Copyright 2004-2006 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __PPC_KERNEL_TSI108_H
-#define __PPC_KERNEL_TSI108_H
-
-#include <asm/pci-bridge.h>
-
-/* Size of entire register space */
-#define TSI108_REG_SIZE         (0x10000)
-
-/* Sizes of register spaces for individual blocks */
-#define TSI108_HLP_SIZE         0x1000
-#define TSI108_PCI_SIZE         0x1000
-#define TSI108_CLK_SIZE         0x1000
-#define TSI108_PB_SIZE          0x1000
-#define TSI108_SD_SIZE          0x1000
-#define TSI108_DMA_SIZE         0x1000
-#define TSI108_ETH_SIZE         0x1000
-#define TSI108_I2C_SIZE         0x400
-#define TSI108_MPIC_SIZE        0x400
-#define TSI108_UART0_SIZE       0x200
-#define TSI108_GPIO_SIZE        0x200
-#define TSI108_UART1_SIZE       0x200
-
-/* Offsets within Tsi108(A) CSR space for individual blocks */
-#define TSI108_HLP_OFFSET       0x0000
-#define TSI108_PCI_OFFSET       0x1000
-#define TSI108_CLK_OFFSET       0x2000
-#define TSI108_PB_OFFSET        0x3000
-#define TSI108_SD_OFFSET        0x4000
-#define TSI108_DMA_OFFSET       0x5000
-#define TSI108_ETH_OFFSET       0x6000
-#define TSI108_I2C_OFFSET       0x7000
-#define TSI108_MPIC_OFFSET      0x7400
-#define TSI108_UART0_OFFSET     0x7800
-#define TSI108_GPIO_OFFSET      0x7A00
-#define TSI108_UART1_OFFSET     0x7C00
-
-/* Tsi108 registers used by common code components */
-#define TSI108_PCI_CSR          (0x004)
-#define TSI108_PCI_IRP_CFG_CTL  (0x180)
-#define TSI108_PCI_IRP_STAT     (0x184)
-#define TSI108_PCI_IRP_ENABLE   (0x188)
-#define TSI108_PCI_IRP_INTAD    (0x18C)
-
-#define TSI108_PCI_IRP_STAT_P_INT       (0x00400000)
-#define TSI108_PCI_IRP_ENABLE_P_INT     (0x00400000)
-
-#define TSI108_CG_PWRUP_STATUS  (0x234)
-
-#define TSI108_PB_ISR           (0x00C)
-#define TSI108_PB_ERRCS         (0x404)
-#define TSI108_PB_AERR          (0x408)
-
-#define TSI108_PB_ERRCS_ES              (1 << 1)
-#define TSI108_PB_ISR_PBS_RD_ERR        (1 << 8)
-
-#define TSI108_PCI_CFG_SIZE             (0x01000000)
-
-/*
- * PHY Configuration Options
- *
- * Specify "bcm54xx" in the compatible property of your device tree phy
- * nodes if your board uses the Broadcom PHYs
- */
-#define TSI108_PHY_MV88E        0       /* Marvel 88Exxxx PHY */
-#define TSI108_PHY_BCM54XX      1       /* Broardcom BCM54xx PHY */
-
-/* Global variables */
-
-extern u32 tsi108_pci_cfg_base;
-/* Exported functions */
-
-extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
-extern unsigned long tsi108_get_mem_size(void);
-extern unsigned long tsi108_get_cpu_clk(void);
-extern unsigned long tsi108_get_sdc_clk(void);
-extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
-                                      int offset, int len, u32 val);
-extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
-                                     int offset, int len, u32 * val);
-extern void tsi108_clear_pci_error(u32 pci_cfg_base);
-
-extern phys_addr_t get_csrbase(void);
-
-typedef struct {
-        u32 regs;               /* hw registers base address */
-        u32 phyregs;            /* phy registers base address */
-        u16 phy;                /* phy address */
-        u16 irq_num;            /* irq number */
-        u8 mac_addr[6];         /* phy mac address */
-        u16 phy_type;   /* type of phy on board */
-} hw_info;
-
-extern u32 get_vir_csrbase(void);
-extern u32 tsi108_csr_vir_base;
-
-static inline u32 tsi108_read_reg(u32 reg_offset)
-{
-        return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
-}
-
-static inline void tsi108_write_reg(u32 reg_offset, u32 val)
-{
-        out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
-}
-
-#endif                          /* __PPC_KERNEL_TSI108_H */
diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h
deleted file mode 100644
index 6ed93979fbe4..000000000000
--- a/include/asm-powerpc/tsi108_irq.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2005 Tundra Semiconductor Corp.
- * Alex Bounine, <alexandreb at tundra.com).
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * definitions for interrupt controller initialization and external interrupt
- * demultiplexing on TSI108EMU/SVB boards.
- */
-
-#ifndef _ASM_POWERPC_TSI108_IRQ_H
-#define _ASM_POWERPC_TSI108_IRQ_H
-
-/*
- * Tsi108 interrupts
- */
-#ifndef TSI108_IRQ_REG_BASE
-#define TSI108_IRQ_REG_BASE             0
-#endif
-
-#define TSI108_IRQ(x)           (TSI108_IRQ_REG_BASE + (x))
-
-#define TSI108_MAX_VECTORS      (36 + 4)        /* 36 sources + PCI INT demux */
-#define MAX_TASK_PRIO   0xF
-
-#define TSI108_IRQ_SPURIOUS     (TSI108_MAX_VECTORS)
-
-#define DEFAULT_PRIO_LVL        10      /* initial priority level */
-
-/* Interrupt vectors assignment to external and internal
- * sources of requests. */
-
-/* EXTERNAL INTERRUPT SOURCES */
-
-#define IRQ_TSI108_EXT_INT0     TSI108_IRQ(0)   /* External Source at INT[0] */
-#define IRQ_TSI108_EXT_INT1     TSI108_IRQ(1)   /* External Source at INT[1] */
-#define IRQ_TSI108_EXT_INT2     TSI108_IRQ(2)   /* External Source at INT[2] */
-#define IRQ_TSI108_EXT_INT3     TSI108_IRQ(3)   /* External Source at INT[3] */
-
-/* INTERNAL INTERRUPT SOURCES */
-
-#define IRQ_TSI108_RESERVED0    TSI108_IRQ(4)   /* Reserved IRQ */
-#define IRQ_TSI108_RESERVED1    TSI108_IRQ(5)   /* Reserved IRQ */
-#define IRQ_TSI108_RESERVED2    TSI108_IRQ(6)   /* Reserved IRQ */
-#define IRQ_TSI108_RESERVED3    TSI108_IRQ(7)   /* Reserved IRQ */
-#define IRQ_TSI108_DMA0         TSI108_IRQ(8)   /* DMA0 */
-#define IRQ_TSI108_DMA1         TSI108_IRQ(9)   /* DMA1 */
-#define IRQ_TSI108_DMA2         TSI108_IRQ(10)  /* DMA2 */
-#define IRQ_TSI108_DMA3         TSI108_IRQ(11)  /* DMA3 */
-#define IRQ_TSI108_UART0        TSI108_IRQ(12)  /* UART0 */
-#define IRQ_TSI108_UART1        TSI108_IRQ(13)  /* UART1 */
-#define IRQ_TSI108_I2C          TSI108_IRQ(14)  /* I2C */
-#define IRQ_TSI108_GPIO         TSI108_IRQ(15)  /* GPIO */
-#define IRQ_TSI108_GIGE0        TSI108_IRQ(16)  /* GIGE0 */
-#define IRQ_TSI108_GIGE1        TSI108_IRQ(17)  /* GIGE1 */
-#define IRQ_TSI108_RESERVED4    TSI108_IRQ(18)  /* Reserved IRQ */
-#define IRQ_TSI108_HLP          TSI108_IRQ(19)  /* HLP */
-#define IRQ_TSI108_SDRAM        TSI108_IRQ(20)  /* SDC */
-#define IRQ_TSI108_PROC_IF      TSI108_IRQ(21)  /* Processor IF */
-#define IRQ_TSI108_RESERVED5    TSI108_IRQ(22)  /* Reserved IRQ */
-#define IRQ_TSI108_PCI          TSI108_IRQ(23)  /* PCI/X block */
-
-#define IRQ_TSI108_MBOX0        TSI108_IRQ(24)  /* Mailbox 0 register */
-#define IRQ_TSI108_MBOX1        TSI108_IRQ(25)  /* Mailbox 1 register */
-#define IRQ_TSI108_MBOX2        TSI108_IRQ(26)  /* Mailbox 2 register */
-#define IRQ_TSI108_MBOX3        TSI108_IRQ(27)  /* Mailbox 3 register */
-
-#define IRQ_TSI108_DBELL0       TSI108_IRQ(28)  /* Doorbell 0 */
-#define IRQ_TSI108_DBELL1       TSI108_IRQ(29)  /* Doorbell 1 */
-#define IRQ_TSI108_DBELL2       TSI108_IRQ(30)  /* Doorbell 2 */
-#define IRQ_TSI108_DBELL3       TSI108_IRQ(31)  /* Doorbell 3 */
-
-#define IRQ_TSI108_TIMER0       TSI108_IRQ(32)  /* Global Timer 0 */
-#define IRQ_TSI108_TIMER1       TSI108_IRQ(33)  /* Global Timer 1 */
-#define IRQ_TSI108_TIMER2       TSI108_IRQ(34)  /* Global Timer 2 */
-#define IRQ_TSI108_TIMER3       TSI108_IRQ(35)  /* Global Timer 3 */
-
-/*
- * PCI bus INTA# - INTD# lines demultiplexor
- */
-#define IRQ_PCI_INTAD_BASE      TSI108_IRQ(36)
-#define IRQ_PCI_INTA            (IRQ_PCI_INTAD_BASE + 0)
-#define IRQ_PCI_INTB            (IRQ_PCI_INTAD_BASE + 1)
-#define IRQ_PCI_INTC            (IRQ_PCI_INTAD_BASE + 2)
-#define IRQ_PCI_INTD            (IRQ_PCI_INTAD_BASE + 3)
-#define NUM_PCI_IRQS            (4)
-
-/* number of entries in vector dispatch table */
-#define IRQ_TSI108_TAB_SIZE     (TSI108_MAX_VECTORS + 1)
-
-/* Mapping of MPIC outputs to processors' interrupt pins */
-
-#define IDIR_INT_OUT0           0x1
-#define IDIR_INT_OUT1           0x2
-#define IDIR_INT_OUT2           0x4
-#define IDIR_INT_OUT3           0x8
-
-/*---------------------------------------------------------------
- * IRQ line configuration parameters */
-
-/* Interrupt delivery modes */
-typedef enum {
-        TSI108_IRQ_DIRECTED,
-        TSI108_IRQ_DISTRIBUTED,
-} TSI108_IRQ_MODE;
-#endif                          /*  _ASM_POWERPC_TSI108_IRQ_H */
diff --git a/include/asm-powerpc/tsi108_pci.h b/include/asm-powerpc/tsi108_pci.h
deleted file mode 100644
index 5653d7cc3e24..000000000000
--- a/include/asm-powerpc/tsi108_pci.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2007 IBM Corp
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_TSI108_PCI_H
-#define _ASM_POWERPC_TSI108_PCI_H
-
-#include <asm/tsi108.h>
-
-/* Register definitions */
-#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10)
-#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14)
-#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18)
-#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c)
-#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c)
-#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204)
-#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208)
-#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c)
-#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210)
-#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214)
-#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220)
-#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230)
-
-extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary);
-extern void tsi108_pci_int_init(struct device_node *node);
-extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
-extern void tsi108_clear_pci_cfg_error(void);
-
-#endif                          /*  _ASM_POWERPC_TSI108_PCI_H */
diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h
deleted file mode 100644
index d3374bc865ba..000000000000
--- a/include/asm-powerpc/types.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _ASM_POWERPC_TYPES_H
-#define _ASM_POWERPC_TYPES_H
-
-#ifdef __powerpc64__
-# include <asm-generic/int-l64.h>
-#else
-# include <asm-generic/int-ll64.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __powerpc64__
-typedef unsigned int umode_t;
-#else
-typedef unsigned short umode_t;
-#endif
-
-typedef struct {
-        __u32 u[4];
-} __attribute__((aligned(16))) __vector128;
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __powerpc64__
-#define BITS_PER_LONG 64
-#else
-#define BITS_PER_LONG 32
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef __vector128 vector128;
-
-/* Physical address used by some IO functions */
-#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
-typedef u64 phys_addr_t;
-#else
-typedef u32 phys_addr_t;
-#endif
-
-#ifdef __powerpc64__
-typedef u64 dma_addr_t;
-#else
-typedef u32 dma_addr_t;
-#endif
-typedef u64 dma64_addr_t;
-
-typedef struct {
-        unsigned long entry;
-        unsigned long toc;
-        unsigned long env;
-} func_descr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_TYPES_H */
diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h
deleted file mode 100644
index bd0fb8495154..000000000000
--- a/include/asm-powerpc/uaccess.h
+++ /dev/null
@@ -1,496 +0,0 @@
-#ifndef _ARCH_POWERPC_UACCESS_H
-#define _ARCH_POWERPC_UACCESS_H
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <asm/asm-compat.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-
-#define VERIFY_READ     0
-#define VERIFY_WRITE    1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- *
- * The fs/ds values are now the highest legal address in the "segment".
- * This simplifies the checking in the routines below.
- */
-
-#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
-
-#define KERNEL_DS       MAKE_MM_SEG(~0UL)
-#ifdef __powerpc64__
-/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */
-#define USER_DS         MAKE_MM_SEG(TASK_SIZE_USER64 - 1)
-#else
-#define USER_DS         MAKE_MM_SEG(TASK_SIZE - 1)
-#endif
-
-#define get_ds()        (KERNEL_DS)
-#define get_fs()        (current->thread.fs)
-#define set_fs(val)     (current->thread.fs = (val))
-
-#define segment_eq(a, b)        ((a).seg == (b).seg)
-
-#ifdef __powerpc64__
-/*
- * This check is sufficient because there is a large enough
- * gap between user addresses and the kernel addresses
- */
-#define __access_ok(addr, size, segment)        \
-        (((addr) <= (segment).seg) && ((size) <= (segment).seg))
-
-#else
-
-#define __access_ok(addr, size, segment)        \
-        (((addr) <= (segment).seg) &&           \
-         (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr)))))
-
-#endif
-
-#define access_ok(type, addr, size)             \
-        (__chk_user_ptr(addr),                  \
-         __access_ok((__force unsigned long)(addr), (size), get_fs()))
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-        unsigned long insn;
-        unsigned long fixup;
-};
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- *
- * As we use the same address space for kernel and user data on the
- * PowerPC, we can just do these as direct assignments.  (Of course, the
- * exception handling means that it's no longer "just"...)
- *
- * The "user64" versions of the user access functions are versions that
- * allow access of 64-bit data. The "get_user" functions do not
- * properly handle 64-bit data because the value gets down cast to a long.
- * The "put_user" functions already handle 64-bit data properly but we add
- * "user64" versions for completeness
- */
-#define get_user(x, ptr) \
-        __get_user_check((x), (ptr), sizeof(*(ptr)))
-#define put_user(x, ptr) \
-        __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user(x, ptr) \
-        __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user(x, ptr) \
-        __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#ifndef __powerpc64__
-#define __get_user64(x, ptr) \
-        __get_user64_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user64(x, ptr) __put_user(x, ptr)
-#endif
-
-#define __get_user_inatomic(x, ptr) \
-        __get_user_nosleep((x), (ptr), sizeof(*(ptr)))
-#define __put_user_inatomic(x, ptr) \
-        __put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
-extern long __put_user_bad(void);
-
-/*
- * We don't tell gcc that we are accessing memory, but this is OK
- * because we do not write to any memory gcc knows about, so there
- * are no aliasing issues.
- */
-#define __put_user_asm(x, addr, err, op)                        \
-        __asm__ __volatile__(                                   \
-                "1:     " op " %1,0(%2) # put_user\n"           \
-                "2:\n"                                          \
-                ".section .fixup,\"ax\"\n"                      \
-                "3:     li %0,%3\n"                             \
-                "       b 2b\n"                                 \
-                ".previous\n"                                   \
-                ".section __ex_table,\"a\"\n"                   \
-                        PPC_LONG_ALIGN "\n"                     \
-                        PPC_LONG "1b,3b\n"                      \
-                ".previous"                                     \
-                : "=r" (err)                                    \
-                : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
-
-#ifdef __powerpc64__
-#define __put_user_asm2(x, ptr, retval)                         \
-          __put_user_asm(x, ptr, retval, "std")
-#else /* __powerpc64__ */
-#define __put_user_asm2(x, addr, err)                           \
-        __asm__ __volatile__(                                   \
-                "1:     stw %1,0(%2)\n"                         \
-                "2:     stw %1+1,4(%2)\n"                       \
-                "3:\n"                                          \
-                ".section .fixup,\"ax\"\n"                      \
-                "4:     li %0,%3\n"                             \
-                "       b 3b\n"                                 \
-                ".previous\n"                                   \
-                ".section __ex_table,\"a\"\n"                   \
-                        PPC_LONG_ALIGN "\n"                     \
-                        PPC_LONG "1b,4b\n"                      \
-                        PPC_LONG "2b,4b\n"                      \
-                ".previous"                                     \
-                : "=r" (err)                                    \
-                : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
-#endif /* __powerpc64__ */
-
-#define __put_user_size(x, ptr, size, retval)                   \
-do {                                                            \
-        retval = 0;                                             \
-        switch (size) {                                         \
-          case 1: __put_user_asm(x, ptr, retval, "stb"); break; \
-          case 2: __put_user_asm(x, ptr, retval, "sth"); break; \
-          case 4: __put_user_asm(x, ptr, retval, "stw"); break; \
-          case 8: __put_user_asm2(x, ptr, retval); break;       \
-          default: __put_user_bad();                            \
-        }                                                       \
-} while (0)
-
-#define __put_user_nocheck(x, ptr, size)                        \
-({                                                              \
-        long __pu_err;                                          \
-        __typeof__(*(ptr)) __user *__pu_addr = (ptr);           \
-        if (!is_kernel_addr((unsigned long)__pu_addr))          \
-                might_sleep();                                  \
-        __chk_user_ptr(ptr);                                    \
-        __put_user_size((x), __pu_addr, (size), __pu_err);      \
-        __pu_err;                                               \
-})
-
-#define __put_user_check(x, ptr, size)                                  \
-({                                                                      \
-        long __pu_err = -EFAULT;                                        \
-        __typeof__(*(ptr)) __user *__pu_addr = (ptr);                   \
-        might_sleep();                                                  \
-        if (access_ok(VERIFY_WRITE, __pu_addr, size))                   \
-                __put_user_size((x), __pu_addr, (size), __pu_err);      \
-        __pu_err;                                                       \
-})
-
-#define __put_user_nosleep(x, ptr, size)                        \
-({                                                              \
-        long __pu_err;                                          \
-        __typeof__(*(ptr)) __user *__pu_addr = (ptr);           \
-        __chk_user_ptr(ptr);                                    \
-        __put_user_size((x), __pu_addr, (size), __pu_err);      \
-        __pu_err;                                               \
-})
-
-
-extern long __get_user_bad(void);
-
-#define __get_user_asm(x, addr, err, op)                \
-        __asm__ __volatile__(                           \
-                "1:     "op" %1,0(%2)   # get_user\n"   \
-                "2:\n"                                  \
-                ".section .fixup,\"ax\"\n"              \
-                "3:     li %0,%3\n"                     \
-                "       li %1,0\n"                      \
-                "       b 2b\n"                         \
-                ".previous\n"                           \
-                ".section __ex_table,\"a\"\n"           \
-                        PPC_LONG_ALIGN "\n"             \
-                        PPC_LONG "1b,3b\n"              \
-                ".previous"                             \
-                : "=r" (err), "=r" (x)                  \
-                : "b" (addr), "i" (-EFAULT), "0" (err))
-
-#ifdef __powerpc64__
-#define __get_user_asm2(x, addr, err)                   \
-        __get_user_asm(x, addr, err, "ld")
-#else /* __powerpc64__ */
-#define __get_user_asm2(x, addr, err)                   \
-        __asm__ __volatile__(                           \
-                "1:     lwz %1,0(%2)\n"                 \
-                "2:     lwz %1+1,4(%2)\n"               \
-                "3:\n"                                  \
-                ".section .fixup,\"ax\"\n"              \
-                "4:     li %0,%3\n"                     \
-                "       li %1,0\n"                      \
-                "       li %1+1,0\n"                    \
-                "       b 3b\n"                         \
-                ".previous\n"                           \
-                ".section __ex_table,\"a\"\n"           \
-                        PPC_LONG_ALIGN "\n"             \
-                        PPC_LONG "1b,4b\n"              \
-                        PPC_LONG "2b,4b\n"              \
-                ".previous"                             \
-                : "=r" (err), "=&r" (x)                 \
-                : "b" (addr), "i" (-EFAULT), "0" (err))
-#endif /* __powerpc64__ */
-
-#define __get_user_size(x, ptr, size, retval)                   \
-do {                                                            \
-        retval = 0;                                             \
-        __chk_user_ptr(ptr);                                    \
-        if (size > sizeof(x))                                   \
-                (x) = __get_user_bad();                         \
-        switch (size) {                                         \
-        case 1: __get_user_asm(x, ptr, retval, "lbz"); break;   \
-        case 2: __get_user_asm(x, ptr, retval, "lhz"); break;   \
-        case 4: __get_user_asm(x, ptr, retval, "lwz"); break;   \
-        case 8: __get_user_asm2(x, ptr, retval);  break;        \
-        default: (x) = __get_user_bad();                        \
-        }                                                       \
-} while (0)
-
-#define __get_user_nocheck(x, ptr, size)                        \
-({                                                              \
-        long __gu_err;                                          \
-        unsigned long __gu_val;                                 \
-        const __typeof__(*(ptr)) __user *__gu_addr = (ptr);     \
-        __chk_user_ptr(ptr);                                    \
-        if (!is_kernel_addr((unsigned long)__gu_addr))          \
-                might_sleep();                                  \
-        __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
-        (x) = (__typeof__(*(ptr)))__gu_val;                     \
-        __gu_err;                                               \
-})
-
-#ifndef __powerpc64__
-#define __get_user64_nocheck(x, ptr, size)                      \
-({                                                              \
-        long __gu_err;                                          \
-        long long __gu_val;                                     \
-        const __typeof__(*(ptr)) __user *__gu_addr = (ptr);     \
-        __chk_user_ptr(ptr);                                    \
-        if (!is_kernel_addr((unsigned long)__gu_addr))          \
-                might_sleep();                                  \
-        __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
-        (x) = (__typeof__(*(ptr)))__gu_val;                     \
-        __gu_err;                                               \
-})
-#endif /* __powerpc64__ */
-
-#define __get_user_check(x, ptr, size)                                  \
-({                                                                      \
-        long __gu_err = -EFAULT;                                        \
-        unsigned long  __gu_val = 0;                                    \
-        const __typeof__(*(ptr)) __user *__gu_addr = (ptr);             \
-        might_sleep();                                                  \
-        if (access_ok(VERIFY_READ, __gu_addr, (size)))                  \
-                __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
-        (x) = (__typeof__(*(ptr)))__gu_val;                             \
-        __gu_err;                                                       \
-})
-
-#define __get_user_nosleep(x, ptr, size)                        \
-({                                                              \
-        long __gu_err;                                          \
-        unsigned long __gu_val;                                 \
-        const __typeof__(*(ptr)) __user *__gu_addr = (ptr);     \
-        __chk_user_ptr(ptr);                                    \
-        __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
-        (x) = (__typeof__(*(ptr)))__gu_val;                     \
-        __gu_err;                                               \
-})
-
-
-/* more complex routines */
-
-extern unsigned long __copy_tofrom_user(void __user *to,
-                const void __user *from, unsigned long size);
-
-#ifndef __powerpc64__
-
-static inline unsigned long copy_from_user(void *to,
-                const void __user *from, unsigned long n)
-{
-        unsigned long over;
-
-        if (access_ok(VERIFY_READ, from, n))
-                return __copy_tofrom_user((__force void __user *)to, from, n);
-        if ((unsigned long)from < TASK_SIZE) {
-                over = (unsigned long)from + n - TASK_SIZE;
-                return __copy_tofrom_user((__force void __user *)to, from,
-                                n - over) + over;
-        }
-        return n;
-}
-
-static inline unsigned long copy_to_user(void __user *to,
-                const void *from, unsigned long n)
-{
-        unsigned long over;
-
-        if (access_ok(VERIFY_WRITE, to, n))
-                return __copy_tofrom_user(to, (__force void __user *)from, n);
-        if ((unsigned long)to < TASK_SIZE) {
-                over = (unsigned long)to + n - TASK_SIZE;
-                return __copy_tofrom_user(to, (__force void __user *)from,
-                                n - over) + over;
-        }
-        return n;
-}
-
-#else /* __powerpc64__ */
-
-#define __copy_in_user(to, from, size) \
-        __copy_tofrom_user((to), (from), (size))
-
-extern unsigned long copy_from_user(void *to, const void __user *from,
-                                    unsigned long n);
-extern unsigned long copy_to_user(void __user *to, const void *from,
-                                  unsigned long n);
-extern unsigned long copy_in_user(void __user *to, const void __user *from,
-                                  unsigned long n);
-
-#endif /* __powerpc64__ */
-
-static inline unsigned long __copy_from_user_inatomic(void *to,
-                const void __user *from, unsigned long n)
-{
-        if (__builtin_constant_p(n) && (n <= 8)) {
-                unsigned long ret = 1;
-
-                switch (n) {
-                case 1:
-                        __get_user_size(*(u8 *)to, from, 1, ret);
-                        break;
-                case 2:
-                        __get_user_size(*(u16 *)to, from, 2, ret);
-                        break;
-                case 4:
-                        __get_user_size(*(u32 *)to, from, 4, ret);
-                        break;
-                case 8:
-                        __get_user_size(*(u64 *)to, from, 8, ret);
-                        break;
-                }
-                if (ret == 0)
-                        return 0;
-        }
-        return __copy_tofrom_user((__force void __user *)to, from, n);
-}
-
-static inline unsigned long __copy_to_user_inatomic(void __user *to,
-                const void *from, unsigned long n)
-{
-        if (__builtin_constant_p(n) && (n <= 8)) {
-                unsigned long ret = 1;
-
-                switch (n) {
-                case 1:
-                        __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret);
-                        break;
-                case 2:
-                        __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret);
-                        break;
-                case 4:
-                        __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret);
-                        break;
-                case 8:
-                        __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret);
-                        break;
-                }
-                if (ret == 0)
-                        return 0;
-        }
-        return __copy_tofrom_user(to, (__force const void __user *)from, n);
-}
-
-static inline unsigned long __copy_from_user(void *to,
-                const void __user *from, unsigned long size)
-{
-        might_sleep();
-        return __copy_from_user_inatomic(to, from, size);
-}
-
-static inline unsigned long __copy_to_user(void __user *to,
-                const void *from, unsigned long size)
-{
-        might_sleep();
-        return __copy_to_user_inatomic(to, from, size);
-}
-
-extern unsigned long __clear_user(void __user *addr, unsigned long size);
-
-static inline unsigned long clear_user(void __user *addr, unsigned long size)
-{
-        might_sleep();
-        if (likely(access_ok(VERIFY_WRITE, addr, size)))
-                return __clear_user(addr, size);
-        if ((unsigned long)addr < TASK_SIZE) {
-                unsigned long over = (unsigned long)addr + size - TASK_SIZE;
-                return __clear_user(addr, size - over) + over;
-        }
-        return size;
-}
-
-extern int __strncpy_from_user(char *dst, const char __user *src, long count);
-
-static inline long strncpy_from_user(char *dst, const char __user *src,
-                long count)
-{
-        might_sleep();
-        if (likely(access_ok(VERIFY_READ, src, 1)))
-                return __strncpy_from_user(dst, src, count);
-        return -EFAULT;
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 for error
- */
-extern int __strnlen_user(const char __user *str, long len, unsigned long top);
-
-/*
- * Returns the length of the string at str (including the null byte),
- * or 0 if we hit a page we can't access,
- * or something > len if we didn't find a null byte.
- *
- * The `top' parameter to __strnlen_user is to make sure that
- * we can never overflow from the user area into kernel space.
- */
-static inline int strnlen_user(const char __user *str, long len)
-{
-        unsigned long top = current->thread.fs.seg;
-
-        if ((unsigned long)str > top)
-                return 0;
-        return __strnlen_user(str, len, top);
-}
-
-#define strlen_user(str)        strnlen_user((str), 0x7ffffffe)
-
-#endif  /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-#endif  /* _ARCH_POWERPC_UACCESS_H */
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
deleted file mode 100644
index 46b09ba6bead..000000000000
--- a/include/asm-powerpc/ucc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors:     Shlomi Gridish <gridish@freescale.com>
- *              Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC unit routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_H__
-#define __UCC_H__
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#define STATISTICS
-
-#define UCC_MAX_NUM     8
-
-/* Slow or fast type for UCCs.
-*/
-enum ucc_speed_type {
-        UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
-        UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
-};
-
-/* ucc_set_type
- * Sets UCC to slow or fast mode.
- *
- * ucc_num - (In) number of UCC (0-7).
- * speed   - (In) slow or fast mode for UCC.
- */
-int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
-
-int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
-
-int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
-        enum comm_dir mode);
-
-int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
-
-/* QE MUX clock routing for UCC
-*/
-static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
-{
-        return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
-}
-
-static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
-{
-        return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
-}
-
-static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
-{
-        return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
-}
-
-#endif                          /* __UCC_H__ */
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
deleted file mode 100644
index fce16abe7ee1..000000000000
--- a/include/asm-powerpc/ucc_fast.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * include/asm-powerpc/ucc_fast.h
- *
- * Internal header file for UCC FAST unit routines.
- *
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors:     Shlomi Gridish <gridish@freescale.com>
- *              Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_FAST_H__
-#define __UCC_FAST_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include "ucc.h"
-
-/* Receive BD's status */
-#define R_E     0x80000000      /* buffer empty */
-#define R_W     0x20000000      /* wrap bit */
-#define R_I     0x10000000      /* interrupt on reception */
-#define R_L     0x08000000      /* last */
-#define R_F     0x04000000      /* first */
-
-/* transmit BD's status */
-#define T_R     0x80000000      /* ready bit */
-#define T_W     0x20000000      /* wrap bit */
-#define T_I     0x10000000      /* interrupt on completion */
-#define T_L     0x08000000      /* last */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases */
-#define UCC_FAST_RX_ALIGN                       4
-#define UCC_FAST_MRBLR_ALIGNMENT                4
-#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT       8
-
-/* Sizes */
-#define UCC_FAST_URFS_MIN_VAL                           0x88
-#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
-
-/* ucc_fast_channel_protocol_mode - UCC FAST mode */
-enum ucc_fast_channel_protocol_mode {
-        UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
-        UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
-        UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
-        UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
-        UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
-        UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
-        UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
-        UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
-        UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
-        UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
-        UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
-        UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
-        UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
-        UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
-        UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
-        UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
-};
-
-/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
-enum ucc_fast_transparent_txrx {
-        UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
-        UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
-};
-
-/* UCC fast diagnostic mode */
-enum ucc_fast_diag_mode {
-        UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
-        UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
-        UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
-        UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
-};
-
-/* UCC fast Sync length (transparent mode only) */
-enum ucc_fast_sync_len {
-        UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
-        UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
-        UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
-        UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
-};
-
-/* UCC fast RTS mode */
-enum ucc_fast_ready_to_send {
-        UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
-        UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
-};
-
-/* UCC fast receiver decoding mode */
-enum ucc_fast_rx_decoding_method {
-        UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
-        UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
-        UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
-        UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
-};
-
-/* UCC fast transmitter encoding mode */
-enum ucc_fast_tx_encoding_method {
-        UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
-        UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
-        UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
-        UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
-};
-
-/* UCC fast CRC length */
-enum ucc_fast_transparent_tcrc {
-        UCC_FAST_16_BIT_CRC = 0x00000000,
-        UCC_FAST_CRC_RESERVED0 = 0x00000040,
-        UCC_FAST_32_BIT_CRC = 0x00000080,
-        UCC_FAST_CRC_RESERVED1 = 0x000000C0
-};
-
-/* Fast UCC initialization structure */
-struct ucc_fast_info {
-        int ucc_num;
-        enum qe_clock rx_clock;
-        enum qe_clock tx_clock;
-        u32 regs;
-        int irq;
-        u32 uccm_mask;
-        int bd_mem_part;
-        int brkpt_support;
-        int grant_support;
-        int tsa;
-        int cdp;
-        int cds;
-        int ctsp;
-        int ctss;
-        int tci;
-        int txsy;
-        int rtsm;
-        int revd;
-        int rsyn;
-        u16 max_rx_buf_length;
-        u16 urfs;
-        u16 urfet;
-        u16 urfset;
-        u16 utfs;
-        u16 utfet;
-        u16 utftt;
-        u16 ufpt;
-        enum ucc_fast_channel_protocol_mode mode;
-        enum ucc_fast_transparent_txrx ttx_trx;
-        enum ucc_fast_tx_encoding_method tenc;
-        enum ucc_fast_rx_decoding_method renc;
-        enum ucc_fast_transparent_tcrc tcrc;
-        enum ucc_fast_sync_len synl;
-};
-
-struct ucc_fast_private {
-        struct ucc_fast_info *uf_info;
-        struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
-        u32 __iomem *p_ucce;    /* a pointer to the event register in memory. */
-        u32 __iomem *p_uccm;    /* a pointer to the mask register in memory. */
-#ifdef CONFIG_UGETH_TX_ON_DEMAND
-        u16 __iomem *p_utodr;   /* pointer to the transmit on demand register */
-#endif
-        int enabled_tx;         /* Whether channel is enabled for Tx (ENT) */
-        int enabled_rx;         /* Whether channel is enabled for Rx (ENR) */
-        int stopped_tx;         /* Whether channel has been stopped for Tx
-                                   (STOP_TX, etc.) */
-        int stopped_rx;         /* Whether channel has been stopped for Rx */
-        u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
-                                                    virtual fifo */
-        u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
-                                                    virtual fifo */
-#ifdef STATISTICS
-        u32 tx_frames;          /* Transmitted frames counter. */
-        u32 rx_frames;          /* Received frames counter (only frames
-                                   passed to application). */
-        u32 tx_discarded;       /* Discarded tx frames counter (frames that
-                                   were discarded by the driver due to errors).
-                                   */
-        u32 rx_discarded;       /* Discarded rx frames counter (frames that
-                                   were discarded by the driver due to errors).
-                                   */
-#endif                          /* STATISTICS */
-        u16 mrblr;              /* maximum receive buffer length */
-};
-
-/* ucc_fast_init
- * Initializes Fast UCC according to user provided parameters.
- *
- * uf_info  - (In) pointer to the fast UCC info structure.
- * uccf_ret - (Out) pointer to the fast UCC structure.
- */
-int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
-
-/* ucc_fast_free
- * Frees all resources for fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_free(struct ucc_fast_private * uccf);
-
-/* ucc_fast_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_irq
- * Handles interrupts on fast UCC.
- * Called from the general interrupt routine to handle interrupts on fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_irq(struct ucc_fast_private * uccf);
-
-/* ucc_fast_transmit_on_demand
- * Immediately forces a poll of the transmitter for data to be sent.
- * Typically, the hardware performs a periodic poll for data that the
- * transmit routine has set up to be transmitted. In cases where
- * this polling cycle is not soon enough, this optional routine can
- * be invoked to force a poll right away, instead. Proper use for
- * each transmission for which this functionality is desired is to
- * call the transmit routine and then this routine right after.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
-
-u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
-
-void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
-
-#endif                          /* __UCC_FAST_H__ */
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
deleted file mode 100644
index 0980e6ad335b..000000000000
--- a/include/asm-powerpc/ucc_slow.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors:     Shlomi Gridish <gridish@freescale.com>
- *              Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC SLOW unit routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_SLOW_H__
-#define __UCC_SLOW_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include "ucc.h"
-
-/* transmit BD's status */
-#define T_R     0x80000000      /* ready bit */
-#define T_PAD   0x40000000      /* add pads to short frames */
-#define T_W     0x20000000      /* wrap bit */
-#define T_I     0x10000000      /* interrupt on completion */
-#define T_L     0x08000000      /* last */
-
-#define T_A     0x04000000      /* Address - the data transmitted as address
-                                   chars */
-#define T_TC    0x04000000      /* transmit CRC */
-#define T_CM    0x02000000      /* continuous mode */
-#define T_DEF   0x02000000      /* collision on previous attempt to transmit */
-#define T_P     0x01000000      /* Preamble - send Preamble sequence before
-                                   data */
-#define T_HB    0x01000000      /* heartbeat */
-#define T_NS    0x00800000      /* No Stop */
-#define T_LC    0x00800000      /* late collision */
-#define T_RL    0x00400000      /* retransmission limit */
-#define T_UN    0x00020000      /* underrun */
-#define T_CT    0x00010000      /* CTS lost */
-#define T_CSL   0x00010000      /* carrier sense lost */
-#define T_RC    0x003c0000      /* retry count */
-
-/* Receive BD's status */
-#define R_E     0x80000000      /* buffer empty */
-#define R_W     0x20000000      /* wrap bit */
-#define R_I     0x10000000      /* interrupt on reception */
-#define R_L     0x08000000      /* last */
-#define R_C     0x08000000      /* the last byte in this buffer is a cntl
-                                   char */
-#define R_F     0x04000000      /* first */
-#define R_A     0x04000000      /* the first byte in this buffer is address
-                                   byte */
-#define R_CM    0x02000000      /* continuous mode */
-#define R_ID    0x01000000      /* buffer close on reception of idles */
-#define R_M     0x01000000      /* Frame received because of promiscuous
-                                   mode */
-#define R_AM    0x00800000      /* Address match */
-#define R_DE    0x00800000      /* Address match */
-#define R_LG    0x00200000      /* Break received */
-#define R_BR    0x00200000      /* Frame length violation */
-#define R_NO    0x00100000      /* Rx Non Octet Aligned Packet */
-#define R_FR    0x00100000      /* Framing Error (no stop bit) character
-                                   received */
-#define R_PR    0x00080000      /* Parity Error character received */
-#define R_AB    0x00080000      /* Frame Aborted */
-#define R_SH    0x00080000      /* frame is too short */
-#define R_CR    0x00040000      /* CRC Error */
-#define R_OV    0x00020000      /* Overrun */
-#define R_CD    0x00010000      /* CD lost */
-#define R_CL    0x00010000      /* this frame is closed because of a
-                                   collision */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases.*/
-#define UCC_SLOW_RX_ALIGN               4
-#define UCC_SLOW_MRBLR_ALIGNMENT        4
-#define UCC_SLOW_PRAM_SIZE              0x100
-#define ALIGNMENT_OF_UCC_SLOW_PRAM      64
-
-/* UCC Slow Channel Protocol Mode */
-enum ucc_slow_channel_protocol_mode {
-        UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
-        UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
-        UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
-};
-
-/* UCC Slow Transparent Transmit CRC (TCRC) */
-enum ucc_slow_transparent_tcrc {
-        /* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
-        UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
-        /* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
-        UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
-        /* 32-bit CCITT CRC (Ethernet and HDLC) */
-        UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
-};
-
-/* UCC Slow oversampling rate for transmitter (TDCR) */
-enum ucc_slow_tx_oversampling_rate {
-        /* 1x clock mode */
-        UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
-        /* 8x clock mode */
-        UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
-        /* 16x clock mode */
-        UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
-        /* 32x clock mode */
-        UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
-};
-
-/* UCC Slow Oversampling rate for receiver (RDCR)
-*/
-enum ucc_slow_rx_oversampling_rate {
-        /* 1x clock mode */
-        UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
-        /* 8x clock mode */
-        UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
-        /* 16x clock mode */
-        UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
-        /* 32x clock mode */
-        UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
-};
-
-/* UCC Slow Transmitter encoding method (TENC)
-*/
-enum ucc_slow_tx_encoding_method {
-        UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
-        UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
-};
-
-/* UCC Slow Receiver decoding method (RENC)
-*/
-enum ucc_slow_rx_decoding_method {
-        UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
-        UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
-};
-
-/* UCC Slow Diagnostic mode (DIAG)
-*/
-enum ucc_slow_diag_mode {
-        UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
-        UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
-        UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
-        UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
-};
-
-struct ucc_slow_info {
-        int ucc_num;
-        int protocol;                   /* QE_CR_PROTOCOL_xxx */
-        enum qe_clock rx_clock;
-        enum qe_clock tx_clock;
-        phys_addr_t regs;
-        int irq;
-        u16 uccm_mask;
-        int data_mem_part;
-        int init_tx;
-        int init_rx;
-        u32 tx_bd_ring_len;
-        u32 rx_bd_ring_len;
-        int rx_interrupts;
-        int brkpt_support;
-        int grant_support;
-        int tsa;
-        int cdp;
-        int cds;
-        int ctsp;
-        int ctss;
-        int rinv;
-        int tinv;
-        int rtsm;
-        int rfw;
-        int tci;
-        int tend;
-        int tfl;
-        int txsy;
-        u16 max_rx_buf_length;
-        enum ucc_slow_transparent_tcrc tcrc;
-        enum ucc_slow_channel_protocol_mode mode;
-        enum ucc_slow_diag_mode diag;
-        enum ucc_slow_tx_oversampling_rate tdcr;
-        enum ucc_slow_rx_oversampling_rate rdcr;
-        enum ucc_slow_tx_encoding_method tenc;
-        enum ucc_slow_rx_decoding_method renc;
-};
-
-struct ucc_slow_private {
-        struct ucc_slow_info *us_info;
-        struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
-        struct ucc_slow_pram *us_pram;  /* a pointer to the parameter RAM */
-        u32 us_pram_offset;
-        int enabled_tx;         /* Whether channel is enabled for Tx (ENT) */
-        int enabled_rx;         /* Whether channel is enabled for Rx (ENR) */
-        int stopped_tx;         /* Whether channel has been stopped for Tx
-                                   (STOP_TX, etc.) */
-        int stopped_rx;         /* Whether channel has been stopped for Rx */
-        struct list_head confQ; /* frames passed to chip waiting for tx */
-        u32 first_tx_bd_mask;   /* mask is used in Tx routine to save status
-                                   and length for first BD in a frame */
-        u32 tx_base_offset;     /* first BD in Tx BD table offset (In MURAM) */
-        u32 rx_base_offset;     /* first BD in Rx BD table offset (In MURAM) */
-        struct qe_bd *confBd;   /* next BD for confirm after Tx */
-        struct qe_bd *tx_bd;    /* next BD for new Tx request */
-        struct qe_bd *rx_bd;    /* next BD to collect after Rx */
-        void *p_rx_frame;       /* accumulating receive frame */
-        u16 *p_ucce;            /* a pointer to the event register in memory.
-                                 */
-        u16 *p_uccm;            /* a pointer to the mask register in memory */
-        u16 saved_uccm;         /* a saved mask for the RX Interrupt bits */
-#ifdef STATISTICS
-        u32 tx_frames;          /* Transmitted frames counters */
-        u32 rx_frames;          /* Received frames counters (only frames
-                                   passed to application) */
-        u32 rx_discarded;       /* Discarded frames counters (frames that
-                                   were discarded by the driver due to
-                                   errors) */
-#endif                          /* STATISTICS */
-};
-
-/* ucc_slow_init
- * Initializes Slow UCC according to provided parameters.
- *
- * us_info  - (In) pointer to the slow UCC info structure.
- * uccs_ret - (Out) pointer to the slow UCC structure.
- */
-int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
-
-/* ucc_slow_free
- * Frees all resources for slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_free(struct ucc_slow_private * uccs);
-
-/* ucc_slow_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_poll_transmitter_now
- * Immediately forces a poll of the transmitter for data to be sent.
- * Typically, the hardware performs a periodic poll for data that the
- * transmit routine has set up to be transmitted. In cases where
- * this polling cycle is not soon enough, this optional routine can
- * be invoked to force a poll right away, instead. Proper use for
- * each transmission for which this functionality is desired is to
- * call the transmit routine and then this routine right after.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
-
-/* ucc_slow_graceful_stop_tx
- * Smoothly stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_stop_tx
- * Stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_restart_tx
- * Restarts transmitting on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
-
-u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
-
-#endif                          /* __UCC_SLOW_H__ */
diff --git a/include/asm-powerpc/ucontext.h b/include/asm-powerpc/ucontext.h
deleted file mode 100644
index d9a4ddf0cc86..000000000000
--- a/include/asm-powerpc/ucontext.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _ASM_POWERPC_UCONTEXT_H
-#define _ASM_POWERPC_UCONTEXT_H
-
-#ifdef __powerpc64__
-#include <asm/sigcontext.h>
-#else
-#include <asm/elf.h>
-#endif
-#include <asm/signal.h>
-
-#ifndef __powerpc64__
-struct mcontext {
-        elf_gregset_t   mc_gregs;
-        elf_fpregset_t  mc_fregs;
-        unsigned long   mc_pad[2];
-        elf_vrregset_t  mc_vregs __attribute__((__aligned__(16)));
-};
-#endif
-
-struct ucontext {
-        unsigned long   uc_flags;
-        struct ucontext __user *uc_link;
-        stack_t         uc_stack;
-#ifndef __powerpc64__
-        int             uc_pad[7];
-        struct mcontext __user *uc_regs;/* points to uc_mcontext field */
-#endif
-        sigset_t        uc_sigmask;
-        /* glibc has 1024-bit signal masks, ours are 64-bit */
-#ifdef __powerpc64__
-        sigset_t        __unused[15];   /* Allow for uc_sigmask growth */
-        struct sigcontext uc_mcontext;  /* last for extensibility */
-#else
-        int             uc_maskext[30];
-        int             uc_pad2[3];
-        struct mcontext uc_mcontext;
-#endif
-};
-
-#endif /* _ASM_POWERPC_UCONTEXT_H */
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
deleted file mode 100644
index 6418ceea44b7..000000000000
--- a/include/asm-powerpc/udbg.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * (c) 2001, 2006 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_UDBG_H
-#define _ASM_POWERPC_UDBG_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-extern void (*udbg_putc)(char c);
-extern int (*udbg_getc)(void);
-extern int (*udbg_getc_poll)(void);
-
-extern void udbg_puts(const char *s);
-extern int udbg_write(const char *s, int n);
-extern int udbg_read(char *buf, int buflen);
-
-extern void register_early_udbg_console(void);
-extern void udbg_printf(const char *fmt, ...)
-        __attribute__ ((format (printf, 1, 2)));
-extern void udbg_progress(char *s, unsigned short hex);
-
-extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
-                           unsigned int clock);
-extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
-                                          unsigned int clock);
-
-struct device_node;
-extern void udbg_scc_init(int force_scc);
-extern int udbg_adb_init(int force_btext);
-extern void udbg_adb_init_early(void);
-
-extern void __init udbg_early_init(void);
-extern void __init udbg_init_debug_lpar(void);
-extern void __init udbg_init_pmac_realmode(void);
-extern void __init udbg_init_maple_realmode(void);
-extern void __init udbg_init_pas_realmode(void);
-extern void __init udbg_init_iseries(void);
-extern void __init udbg_init_rtas_panel(void);
-extern void __init udbg_init_rtas_console(void);
-extern void __init udbg_init_debug_beat(void);
-extern void __init udbg_init_btext(void);
-extern void __init udbg_init_44x_as1(void);
-extern void __init udbg_init_40x_realmode(void);
-extern void __init udbg_init_cpm(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/include/asm-powerpc/uic.h b/include/asm-powerpc/uic.h
deleted file mode 100644
index 970eb7e2186a..000000000000
--- a/include/asm-powerpc/uic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * include/asm-powerpc/uic.h
- *
- * IBM PPC4xx UIC external definitions and structure.
- *
- * Maintainer: David Gibson <dwg@au1.ibm.com>
- * Copyright 2007 IBM Corporation.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_UIC_H
-#define _ASM_POWERPC_UIC_H
-
-#ifdef __KERNEL__
-
-extern void __init uic_init_tree(void);
-extern unsigned int uic_get_irq(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_UIC_H */
diff --git a/include/asm-powerpc/unaligned.h b/include/asm-powerpc/unaligned.h
deleted file mode 100644
index 5f1b1e3c2137..000000000000
--- a/include/asm-powerpc/unaligned.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_POWERPC_UNALIGNED_H
-#define _ASM_POWERPC_UNALIGNED_H
-
-#ifdef __KERNEL__
-
-/*
- * The PowerPC can do unaligned accesses itself in big endian mode.
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned   __get_unaligned_be
-#define put_unaligned   __put_unaligned_be
-
-#endif  /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_UNALIGNED_H */
diff --git a/include/asm-powerpc/uninorth.h b/include/asm-powerpc/uninorth.h
deleted file mode 100644
index f737732c3861..000000000000
--- a/include/asm-powerpc/uninorth.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * uninorth.h: definitions for using the "UniNorth" host bridge chip
- *             from Apple. This chip is used on "Core99" machines
- *             This also includes U2 used on more recent MacRISC2/3
- *             machines and U3 (G5) 
- *
- */
-#ifdef __KERNEL__
-#ifndef __ASM_UNINORTH_H__
-#define __ASM_UNINORTH_H__
-
-/*
- * Uni-N and U3 config space reg. definitions
- *
- * (Little endian)
- */
-
-/* Address ranges selection. This one should work with Bandit too */
-/* Not U3 */
-#define UNI_N_ADDR_SELECT               0x48
-#define UNI_N_ADDR_COARSE_MASK          0xffff0000      /* 256Mb regions at *0000000 */
-#define UNI_N_ADDR_FINE_MASK            0x0000ffff      /*  16Mb regions at f*000000 */
-
-/* AGP registers */
-/* Not U3 */
-#define UNI_N_CFG_GART_BASE             0x8c
-#define UNI_N_CFG_AGP_BASE              0x90
-#define UNI_N_CFG_GART_CTRL             0x94
-#define UNI_N_CFG_INTERNAL_STATUS       0x98
-#define UNI_N_CFG_GART_DUMMY_PAGE       0xa4
-
-/* UNI_N_CFG_GART_CTRL bits definitions */
-#define UNI_N_CFG_GART_INVAL            0x00000001
-#define UNI_N_CFG_GART_ENABLE           0x00000100
-#define UNI_N_CFG_GART_2xRESET          0x00010000
-#define UNI_N_CFG_GART_DISSBADET        0x00020000
-/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
-#define U3_N_CFG_GART_SYNCMODE          0x00040000
-#define U3_N_CFG_GART_PERFRD            0x00080000
-#define U3_N_CFG_GART_B2BGNT            0x00200000
-#define U3_N_CFG_GART_FASTDDR           0x00400000
-
-/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
- * revision 1.5 (x4 AGP) may need further changes.
- *
- * AGP_BASE register contains the base address of the AGP aperture on
- * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
- * even if decoding of this address range is enabled in the address select
- * register. Apparently, the only supported bases are 256Mb multiples
- * (high 4 bits of that register).
- *
- * GART_BASE register appear to contain the physical address of the GART
- * in system memory in the high address bits (page aligned), and the
- * GART size in the low order bits (number of GART pages)
- *
- * The GART format itself is one 32bits word per physical memory page.
- * This word contains, in little-endian format (!!!), the physical address
- * of the page in the high bits, and what appears to be an "enable" bit
- * in the LSB bit (0) that must be set to 1 when the entry is valid.
- *
- * Obviously, the GART is not cache coherent and so any change to it
- * must be flushed to memory (or maybe just make the GART space non
- * cachable). AGP memory itself doens't seem to be cache coherent neither.
- *
- * In order to invalidate the GART (which is probably necessary to inval
- * the bridge internal TLBs), the following sequence has to be written,
- * in order, to the GART_CTRL register:
- *
- *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
- *   UNI_N_CFG_GART_ENABLE
- *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
- *   UNI_N_CFG_GART_ENABLE
- *
- * As far as AGP "features" are concerned, it looks like fast write may
- * not be supported but this has to be confirmed.
- *
- * Turning on AGP seem to require a double invalidate operation, one before
- * setting the AGP command register, on after.
- *
- * Turning off AGP seems to require the following sequence: first wait
- * for the AGP to be idle by reading the internal status register, then
- * write in that order to the GART_CTRL register:
- *
- *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
- *   0
- *   UNI_N_CFG_GART_2xRESET
- *   0
- */
-
-/*
- * Uni-N memory mapped reg. definitions
- *
- * Those registers are Big-Endian !!
- *
- * Their meaning come from either Darwin and/or from experiments I made with
- * the bootrom, I'm not sure about their exact meaning yet
- *
- */
-
-/* Version of the UniNorth chip */
-#define UNI_N_VERSION                   0x0000          /* Known versions: 3,7 and 8 */
-
-#define UNI_N_VERSION_107               0x0003          /* 1.0.7 */
-#define UNI_N_VERSION_10A               0x0007          /* 1.0.10 */
-#define UNI_N_VERSION_150               0x0011          /* 1.5 */
-#define UNI_N_VERSION_200               0x0024          /* 2.0 */
-#define UNI_N_VERSION_PANGEA            0x00C0          /* Integrated U1 + K */
-#define UNI_N_VERSION_INTREPID          0x00D2          /* Integrated U2 + K */
-#define UNI_N_VERSION_300               0x0030          /* 3.0 (U3 on G5) */
-
-/* This register is used to enable/disable various clocks */
-#define UNI_N_CLOCK_CNTL                0x0020
-#define UNI_N_CLOCK_CNTL_PCI            0x00000001      /* PCI2 clock control */
-#define UNI_N_CLOCK_CNTL_GMAC           0x00000002      /* GMAC clock control */
-#define UNI_N_CLOCK_CNTL_FW             0x00000004      /* FireWire clock control */
-#define UNI_N_CLOCK_CNTL_ATA100         0x00000010      /* ATA-100 clock control (U2) */
-
-/* Power Management control */
-#define UNI_N_POWER_MGT                 0x0030
-#define UNI_N_POWER_MGT_NORMAL          0x00
-#define UNI_N_POWER_MGT_IDLE2           0x01
-#define UNI_N_POWER_MGT_SLEEP           0x02
-
-/* This register is configured by Darwin depending on the UniN
- * revision
- */
-#define UNI_N_ARB_CTRL                  0x0040
-#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15
-#define UNI_N_ARB_CTRL_QACK_DELAY_MASK  0x0e1f8000
-#define UNI_N_ARB_CTRL_QACK_DELAY       0x30
-#define UNI_N_ARB_CTRL_QACK_DELAY105    0x00
-
-/* This one _might_ return the CPU number of the CPU reading it;
- * the bootROM decides whether to boot or to sleep/spinloop depending
- * on this register beeing 0 or not
- */
-#define UNI_N_CPU_NUMBER                0x0050
-
-/* This register appear to be read by the bootROM to decide what
- *  to do on a non-recoverable reset (powerup or wakeup)
- */
-#define UNI_N_HWINIT_STATE              0x0070
-#define UNI_N_HWINIT_STATE_SLEEPING     0x01
-#define UNI_N_HWINIT_STATE_RUNNING      0x02
-/* This last bit appear to be used by the bootROM to know the second
- * CPU has started and will enter it's sleep loop with IP=0
- */
-#define UNI_N_HWINIT_STATE_CPU1_FLAG    0x10000000
-
-/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
- * is in low speed mode.
- */
-#define UNI_N_AACK_DELAY                0x0100
-#define UNI_N_AACK_DELAY_ENABLE         0x00000001
-
-/* Clock status for Intrepid */
-#define UNI_N_CLOCK_STOP_STATUS0        0x0150
-#define UNI_N_CLOCK_STOPPED_EXTAGP      0x00200000
-#define UNI_N_CLOCK_STOPPED_AGPDEL      0x00100000
-#define UNI_N_CLOCK_STOPPED_I2S0_45_49  0x00080000
-#define UNI_N_CLOCK_STOPPED_I2S0_18     0x00040000
-#define UNI_N_CLOCK_STOPPED_I2S1_45_49  0x00020000
-#define UNI_N_CLOCK_STOPPED_I2S1_18     0x00010000
-#define UNI_N_CLOCK_STOPPED_TIMER       0x00008000
-#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000
-#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000
-#define UNI_N_CLOCK_STOPPED_SCC_VIA32   0x00001000
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT0   0x00000800
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT1   0x00000400
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT2   0x00000200
-#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO  0x00000100
-#define UNI_N_CLOCK_STOPPED_VEO0        0x00000080
-#define UNI_N_CLOCK_STOPPED_VEO1        0x00000040
-#define UNI_N_CLOCK_STOPPED_USB0        0x00000020
-#define UNI_N_CLOCK_STOPPED_USB1        0x00000010
-#define UNI_N_CLOCK_STOPPED_USB2        0x00000008
-#define UNI_N_CLOCK_STOPPED_32          0x00000004
-#define UNI_N_CLOCK_STOPPED_45          0x00000002
-#define UNI_N_CLOCK_STOPPED_49          0x00000001
-
-#define UNI_N_CLOCK_STOP_STATUS1        0x0160
-#define UNI_N_CLOCK_STOPPED_PLL4REF     0x00080000
-#define UNI_N_CLOCK_STOPPED_CPUDEL      0x00040000
-#define UNI_N_CLOCK_STOPPED_CPU         0x00020000
-#define UNI_N_CLOCK_STOPPED_BUF_REFCKO  0x00010000
-#define UNI_N_CLOCK_STOPPED_PCI2        0x00008000
-#define UNI_N_CLOCK_STOPPED_FW          0x00004000
-#define UNI_N_CLOCK_STOPPED_GB          0x00002000
-#define UNI_N_CLOCK_STOPPED_ATA66       0x00001000
-#define UNI_N_CLOCK_STOPPED_ATA100      0x00000800
-#define UNI_N_CLOCK_STOPPED_MAX         0x00000400
-#define UNI_N_CLOCK_STOPPED_PCI1        0x00000200
-#define UNI_N_CLOCK_STOPPED_KLPCI       0x00000100
-#define UNI_N_CLOCK_STOPPED_USB0PCI     0x00000080
-#define UNI_N_CLOCK_STOPPED_USB1PCI     0x00000040
-#define UNI_N_CLOCK_STOPPED_USB2PCI     0x00000020
-#define UNI_N_CLOCK_STOPPED_7PCI1       0x00000008
-#define UNI_N_CLOCK_STOPPED_AGP         0x00000004
-#define UNI_N_CLOCK_STOPPED_PCI0        0x00000002
-#define UNI_N_CLOCK_STOPPED_18          0x00000001
-
-/* Intrepid registe to OF do-platform-clockspreading */
-#define UNI_N_CLOCK_SPREADING           0x190
-
-/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
-
-
-/*
- * U3 specific registers
- */
-
-
-/* U3 Toggle */
-#define U3_TOGGLE_REG                   0x00e0
-#define U3_PMC_START_STOP               0x0001
-#define U3_MPIC_RESET                   0x0002
-#define U3_MPIC_OUTPUT_ENABLE           0x0004
-
-/* U3 API PHY Config 1 */
-#define U3_API_PHY_CONFIG_1             0x23030
-
-/* U3 HyperTransport registers */
-#define U3_HT_CONFIG_BASE               0x70000
-#define U3_HT_LINK_COMMAND              0x100
-#define U3_HT_LINK_CONFIG               0x110
-#define U3_HT_LINK_FREQ                 0x120
-
-#endif /* __ASM_UNINORTH_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
deleted file mode 100644
index e07d0c76ed77..000000000000
--- a/include/asm-powerpc/unistd.h
+++ /dev/null
@@ -1,398 +0,0 @@
-#ifndef _ASM_POWERPC_UNISTD_H_
-#define _ASM_POWERPC_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit                 1
-#define __NR_fork                 2
-#define __NR_read                 3
-#define __NR_write                4
-#define __NR_open                 5
-#define __NR_close                6
-#define __NR_waitpid              7
-#define __NR_creat                8
-#define __NR_link                 9
-#define __NR_unlink              10
-#define __NR_execve              11
-#define __NR_chdir               12
-#define __NR_time                13
-#define __NR_mknod               14
-#define __NR_chmod               15
-#define __NR_lchown              16
-#define __NR_break               17
-#define __NR_oldstat             18
-#define __NR_lseek               19
-#define __NR_getpid              20
-#define __NR_mount               21
-#define __NR_umount              22
-#define __NR_setuid              23
-#define __NR_getuid              24
-#define __NR_stime               25
-#define __NR_ptrace              26
-#define __NR_alarm               27
-#define __NR_oldfstat            28
-#define __NR_pause               29
-#define __NR_utime               30
-#define __NR_stty                31
-#define __NR_gtty                32
-#define __NR_access              33
-#define __NR_nice                34
-#define __NR_ftime               35
-#define __NR_sync                36
-#define __NR_kill                37
-#define __NR_rename              38
-#define __NR_mkdir               39
-#define __NR_rmdir               40
-#define __NR_dup                 41
-#define __NR_pipe                42
-#define __NR_times               43
-#define __NR_prof                44
-#define __NR_brk                 45
-#define __NR_setgid              46
-#define __NR_getgid              47
-#define __NR_signal              48
-#define __NR_geteuid             49
-#define __NR_getegid             50
-#define __NR_acct                51
-#define __NR_umount2             52
-#define __NR_lock                53
-#define __NR_ioctl               54
-#define __NR_fcntl               55
-#define __NR_mpx                 56
-#define __NR_setpgid             57
-#define __NR_ulimit              58
-#define __NR_oldolduname         59
-#define __NR_umask               60
-#define __NR_chroot              61
-#define __NR_ustat               62
-#define __NR_dup2                63
-#define __NR_getppid             64
-#define __NR_getpgrp             65
-#define __NR_setsid              66
-#define __NR_sigaction           67
-#define __NR_sgetmask            68
-#define __NR_ssetmask            69
-#define __NR_setreuid            70
-#define __NR_setregid            71
-#define __NR_sigsuspend          72
-#define __NR_sigpending          73
-#define __NR_sethostname         74
-#define __NR_setrlimit           75
-#define __NR_getrlimit           76
-#define __NR_getrusage           77
-#define __NR_gettimeofday        78
-#define __NR_settimeofday        79
-#define __NR_getgroups           80
-#define __NR_setgroups           81
-#define __NR_select              82
-#define __NR_symlink             83
-#define __NR_oldlstat            84
-#define __NR_readlink            85
-#define __NR_uselib              86
-#define __NR_swapon              87
-#define __NR_reboot              88
-#define __NR_readdir             89
-#define __NR_mmap                90
-#define __NR_munmap              91
-#define __NR_truncate            92
-#define __NR_ftruncate           93
-#define __NR_fchmod              94
-#define __NR_fchown              95
-#define __NR_getpriority         96
-#define __NR_setpriority         97
-#define __NR_profil              98
-#define __NR_statfs              99
-#define __NR_fstatfs            100
-#define __NR_ioperm             101
-#define __NR_socketcall         102
-#define __NR_syslog             103
-#define __NR_setitimer          104
-#define __NR_getitimer          105
-#define __NR_stat               106
-#define __NR_lstat              107
-#define __NR_fstat              108
-#define __NR_olduname           109
-#define __NR_iopl               110
-#define __NR_vhangup            111
-#define __NR_idle               112
-#define __NR_vm86               113
-#define __NR_wait4              114
-#define __NR_swapoff            115
-#define __NR_sysinfo            116
-#define __NR_ipc                117
-#define __NR_fsync              118
-#define __NR_sigreturn          119
-#define __NR_clone              120
-#define __NR_setdomainname      121
-#define __NR_uname              122
-#define __NR_modify_ldt         123
-#define __NR_adjtimex           124
-#define __NR_mprotect           125
-#define __NR_sigprocmask        126
-#define __NR_create_module      127
-#define __NR_init_module        128
-#define __NR_delete_module      129
-#define __NR_get_kernel_syms    130
-#define __NR_quotactl           131
-#define __NR_getpgid            132
-#define __NR_fchdir             133
-#define __NR_bdflush            134
-#define __NR_sysfs              135
-#define __NR_personality        136
-#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
-#define __NR_setfsuid           138
-#define __NR_setfsgid           139
-#define __NR__llseek            140
-#define __NR_getdents           141
-#define __NR__newselect         142
-#define __NR_flock              143
-#define __NR_msync              144
-#define __NR_readv              145
-#define __NR_writev             146
-#define __NR_getsid             147
-#define __NR_fdatasync          148
-#define __NR__sysctl            149
-#define __NR_mlock              150
-#define __NR_munlock            151
-#define __NR_mlockall           152
-#define __NR_munlockall         153
-#define __NR_sched_setparam             154
-#define __NR_sched_getparam             155
-#define __NR_sched_setscheduler         156
-#define __NR_sched_getscheduler         157
-#define __NR_sched_yield                158
-#define __NR_sched_get_priority_max     159
-#define __NR_sched_get_priority_min     160
-#define __NR_sched_rr_get_interval      161
-#define __NR_nanosleep          162
-#define __NR_mremap             163
-#define __NR_setresuid          164
-#define __NR_getresuid          165
-#define __NR_query_module       166
-#define __NR_poll               167
-#define __NR_nfsservctl         168
-#define __NR_setresgid          169
-#define __NR_getresgid          170
-#define __NR_prctl              171
-#define __NR_rt_sigreturn       172
-#define __NR_rt_sigaction       173
-#define __NR_rt_sigprocmask     174
-#define __NR_rt_sigpending      175
-#define __NR_rt_sigtimedwait    176
-#define __NR_rt_sigqueueinfo    177
-#define __NR_rt_sigsuspend      178
-#define __NR_pread64            179
-#define __NR_pwrite64           180
-#define __NR_chown              181
-#define __NR_getcwd             182
-#define __NR_capget             183
-#define __NR_capset             184
-#define __NR_sigaltstack        185
-#define __NR_sendfile           186
-#define __NR_getpmsg            187     /* some people actually want streams */
-#define __NR_putpmsg            188     /* some people actually want streams */
-#define __NR_vfork              189
-#define __NR_ugetrlimit         190     /* SuS compliant getrlimit */
-#define __NR_readahead          191
-#ifndef __powerpc64__                   /* these are 32-bit only */
-#define __NR_mmap2              192
-#define __NR_truncate64         193
-#define __NR_ftruncate64        194
-#define __NR_stat64             195
-#define __NR_lstat64            196
-#define __NR_fstat64            197
-#endif
-#define __NR_pciconfig_read     198
-#define __NR_pciconfig_write    199
-#define __NR_pciconfig_iobase   200
-#define __NR_multiplexer        201
-#define __NR_getdents64         202
-#define __NR_pivot_root         203
-#ifndef __powerpc64__
-#define __NR_fcntl64            204
-#endif
-#define __NR_madvise            205
-#define __NR_mincore            206
-#define __NR_gettid             207
-#define __NR_tkill              208
-#define __NR_setxattr           209
-#define __NR_lsetxattr          210
-#define __NR_fsetxattr          211
-#define __NR_getxattr           212
-#define __NR_lgetxattr          213
-#define __NR_fgetxattr          214
-#define __NR_listxattr          215
-#define __NR_llistxattr         216
-#define __NR_flistxattr         217
-#define __NR_removexattr        218
-#define __NR_lremovexattr       219
-#define __NR_fremovexattr       220
-#define __NR_futex              221
-#define __NR_sched_setaffinity  222
-#define __NR_sched_getaffinity  223
-/* 224 currently unused */
-#define __NR_tuxcall            225
-#ifndef __powerpc64__
-#define __NR_sendfile64         226
-#endif
-#define __NR_io_setup           227
-#define __NR_io_destroy         228
-#define __NR_io_getevents       229
-#define __NR_io_submit          230
-#define __NR_io_cancel          231
-#define __NR_set_tid_address    232
-#define __NR_fadvise64          233
-#define __NR_exit_group         234
-#define __NR_lookup_dcookie     235
-#define __NR_epoll_create       236
-#define __NR_epoll_ctl          237
-#define __NR_epoll_wait         238
-#define __NR_remap_file_pages   239
-#define __NR_timer_create       240
-#define __NR_timer_settime      241
-#define __NR_timer_gettime      242
-#define __NR_timer_getoverrun   243
-#define __NR_timer_delete       244
-#define __NR_clock_settime      245
-#define __NR_clock_gettime      246
-#define __NR_clock_getres       247
-#define __NR_clock_nanosleep    248
-#define __NR_swapcontext        249
-#define __NR_tgkill             250
-#define __NR_utimes             251
-#define __NR_statfs64           252
-#define __NR_fstatfs64          253
-#ifndef __powerpc64__
-#define __NR_fadvise64_64       254
-#endif
-#define __NR_rtas               255
-#define __NR_sys_debug_setcontext 256
-/* Number 257 is reserved for vserver */
-#define __NR_migrate_pages      258
-#define __NR_mbind              259
-#define __NR_get_mempolicy      260
-#define __NR_set_mempolicy      261
-#define __NR_mq_open            262
-#define __NR_mq_unlink          263
-#define __NR_mq_timedsend       264
-#define __NR_mq_timedreceive    265
-#define __NR_mq_notify          266
-#define __NR_mq_getsetattr      267
-#define __NR_kexec_load         268
-#define __NR_add_key            269
-#define __NR_request_key        270
-#define __NR_keyctl             271
-#define __NR_waitid             272
-#define __NR_ioprio_set         273
-#define __NR_ioprio_get         274
-#define __NR_inotify_init       275
-#define __NR_inotify_add_watch  276
-#define __NR_inotify_rm_watch   277
-#define __NR_spu_run            278
-#define __NR_spu_create         279
-#define __NR_pselect6           280
-#define __NR_ppoll              281
-#define __NR_unshare            282
-#define __NR_splice             283
-#define __NR_tee                284
-#define __NR_vmsplice           285
-#define __NR_openat             286
-#define __NR_mkdirat            287
-#define __NR_mknodat            288
-#define __NR_fchownat           289
-#define __NR_futimesat          290
-#ifdef __powerpc64__
-#define __NR_newfstatat         291
-#else
-#define __NR_fstatat64          291
-#endif
-#define __NR_unlinkat           292
-#define __NR_renameat           293
-#define __NR_linkat             294
-#define __NR_symlinkat          295
-#define __NR_readlinkat         296
-#define __NR_fchmodat           297
-#define __NR_faccessat          298
-#define __NR_get_robust_list    299
-#define __NR_set_robust_list    300
-#define __NR_move_pages         301
-#define __NR_getcpu             302
-#define __NR_epoll_pwait        303
-#define __NR_utimensat          304
-#define __NR_signalfd           305
-#define __NR_timerfd_create     306
-#define __NR_eventfd            307
-#define __NR_sync_file_range2   308
-#define __NR_fallocate          309
-#define __NR_subpage_prot       310
-#define __NR_timerfd_settime    311
-#define __NR_timerfd_gettime    312
-#define __NR_signalfd4          313
-#define __NR_eventfd2           314
-#define __NR_epoll_create1      315
-#define __NR_dup3               316
-#define __NR_pipe2              317
-#define __NR_inotify_init1      318
-
-#ifdef __KERNEL__
-
-#define __NR_syscalls           319
-
-#define __NR__exit __NR_exit
-#define NR_syscalls     __NR_syscalls
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#ifdef CONFIG_PPC32
-#define __ARCH_WANT_OLD_STAT
-#endif
-#ifdef CONFIG_PPC64
-#define __ARCH_WANT_COMPAT_SYS_TIME
-#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_SYS_NEWFSTATAT
-#endif
-
-/*
- * "Conditional" syscalls
- */
-#define cond_syscall(x) \
-        asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
-
-#endif          /* __ASSEMBLY__ */
-#endif          /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/include/asm-powerpc/user.h b/include/asm-powerpc/user.h
deleted file mode 100644
index 3fd4545dd74e..000000000000
--- a/include/asm-powerpc/user.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _ASM_POWERPC_USER_H
-#define _ASM_POWERPC_USER_H
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Adapted from <asm-alpha/user.h>
- *
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
- * are as follows:
- *
- *  upage: 1 page consisting of a user struct that tells gdb
- *      what is present in the file.  Directly after this is a
- *      copy of the task_struct, which is currently not used by gdb,
- *      but it may come in handy at some point.  All of the registers
- *      are stored as part of the upage.  The upage should always be
- *      only one page long.
- *  data: The data segment follows next.  We use current->end_text to
- *      current->brk to pick up all of the user variables, plus any memory
- *      that may have been sbrk'ed.  No attempt is made to determine if a
- *      page is demand-zero or if a page is totally unused, we just cover
- *      the entire range.  All of the addresses are rounded in such a way
- *      that an integral number of pages is written.
- *  stack: We need the stack information in order to get a meaningful
- *      backtrace.  We need to write the data from usp to
- *      current->start_stack, so we round each of these in order to be able
- *      to write an integer number of pages.
- */
-struct user {
-        struct pt_regs  regs;                   /* entire machine state */
-        size_t          u_tsize;                /* text size (pages) */
-        size_t          u_dsize;                /* data size (pages) */
-        size_t          u_ssize;                /* stack size (pages) */
-        unsigned long   start_code;             /* text starting address */
-        unsigned long   start_data;             /* data starting address */
-        unsigned long   start_stack;            /* stack starting address */
-        long int        signal;                 /* signal causing core dump */
-        unsigned long   u_ar0;                  /* help gdb find registers */
-        unsigned long   magic;                  /* identifies a core file */
-        char            u_comm[32];             /* user command name */
-};
-
-#define NBPG                    PAGE_SIZE
-#define UPAGES                  1
-#define HOST_TEXT_START_ADDR    (u.start_code)
-#define HOST_DATA_START_ADDR    (u.start_data)
-#define HOST_STACK_END_ADDR     (u.start_stack + u.u_ssize * NBPG)
-#endif  /* _ASM_POWERPC_USER_H */
diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h
deleted file mode 100644
index 26fc449bd989..000000000000
--- a/include/asm-powerpc/vdso.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef __PPC64_VDSO_H__
-#define __PPC64_VDSO_H__
-
-#ifdef __KERNEL__
-
-/* Default link addresses for the vDSOs */
-#define VDSO32_LBASE    0x100000
-#define VDSO64_LBASE    0x100000
-
-/* Default map addresses */
-#define VDSO32_MBASE    VDSO32_LBASE
-#define VDSO64_MBASE    VDSO64_LBASE
-
-#define VDSO_VERSION_STRING     LINUX_2.6.15
-
-/* Define if 64 bits VDSO has procedure descriptors */
-#undef VDS64_HAS_DESCRIPTORS
-
-#ifndef __ASSEMBLY__
-
-/* Offsets relative to thread->vdso_base */
-extern unsigned long vdso64_rt_sigtramp;
-extern unsigned long vdso32_sigtramp;
-extern unsigned long vdso32_rt_sigtramp;
-
-#else /* __ASSEMBLY__ */
-
-#ifdef __VDSO64__
-#ifdef VDS64_HAS_DESCRIPTORS
-#define V_FUNCTION_BEGIN(name)          \
-        .globl name;                    \
-        .section ".opd","a";            \
-        .align 3;                       \
-        name:                           \
-        .quad .name,.TOC.@tocbase,0;    \
-        .previous;                      \
-        .globl .name;                   \
-        .type .name,@function;          \
-        .name:                          \
-
-#define V_FUNCTION_END(name)            \
-        .size .name,.-.name;
-
-#define V_LOCAL_FUNC(name) (.name)
-
-#else /* VDS64_HAS_DESCRIPTORS */
-
-#define V_FUNCTION_BEGIN(name)          \
-        .globl name;                    \
-        name:                           \
-
-#define V_FUNCTION_END(name)            \
-        .size name,.-name;
-
-#define V_LOCAL_FUNC(name) (name)
-
-#endif /* VDS64_HAS_DESCRIPTORS */
-#endif /* __VDSO64__ */
-
-#ifdef __VDSO32__
-
-#define V_FUNCTION_BEGIN(name)          \
-        .globl name;                    \
-        .type name,@function;           \
-        name:                           \
-
-#define V_FUNCTION_END(name)            \
-        .size name,.-name;
-
-#define V_LOCAL_FUNC(name) (name)
-
-#endif /* __VDSO32__ */
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __PPC64_VDSO_H__ */
diff --git a/include/asm-powerpc/vdso_datapage.h b/include/asm-powerpc/vdso_datapage.h
deleted file mode 100644
index f01393224b52..000000000000
--- a/include/asm-powerpc/vdso_datapage.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef _VDSO_DATAPAGE_H
-#define _VDSO_DATAPAGE_H
-#ifdef __KERNEL__
-
-/*
- * Copyright (C) 2002 Peter Bergner <bergner@vnet.ibm.com>, IBM
- * Copyright (C) 2005 Benjamin Herrenschmidy <benh@kernel.crashing.org>,
- *                    IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-
-/*
- * Note about this structure:
- *
- * This structure was historically called systemcfg and exposed to
- * userland via /proc/ppc64/systemcfg. Unfortunately, this became an
- * ABI issue as some proprietary software started relying on being able
- * to mmap() it, thus we have to keep the base layout at least for a
- * few kernel versions.
- *
- * However, since ppc32 doesn't suffer from this backward handicap,
- * a simpler version of the data structure is used there with only the
- * fields actually used by the vDSO.
- *
- */
-
-/*
- * If the major version changes we are incompatible.
- * Minor version changes are a hint.
- */
-#define SYSTEMCFG_MAJOR 1
-#define SYSTEMCFG_MINOR 1
-
-#ifndef __ASSEMBLY__
-
-#include <linux/unistd.h>
-
-#define SYSCALL_MAP_SIZE      ((__NR_syscalls + 31) / 32)
-
-/*
- * So here is the ppc64 backward compatible version
- */
-
-#ifdef CONFIG_PPC64
-
-struct vdso_data {
-        __u8  eye_catcher[16];          /* Eyecatcher: SYSTEMCFG:PPC64  0x00 */
-        struct {                        /* Systemcfg version numbers         */
-                __u32 major;            /* Major number                 0x10 */
-                __u32 minor;            /* Minor number                 0x14 */
-        } version;
-
-        /* Note about the platform flags: it now only contains the lpar
-         * bit. The actual platform number is dead and burried
-         */
-        __u32 platform;                 /* Platform flags               0x18 */
-        __u32 processor;                /* Processor type               0x1C */
-        __u64 processorCount;           /* # of physical processors     0x20 */
-        __u64 physicalMemorySize;       /* Size of real memory(B)       0x28 */
-        __u64 tb_orig_stamp;            /* Timebase at boot             0x30 */
-        __u64 tb_ticks_per_sec;         /* Timebase tics / sec          0x38 */
-        __u64 tb_to_xs;                 /* Inverse of TB to 2^20        0x40 */
-        __u64 stamp_xsec;               /*                              0x48 */
-        __u64 tb_update_count;          /* Timebase atomicity ctr       0x50 */
-        __u32 tz_minuteswest;           /* Minutes west of Greenwich    0x58 */
-        __u32 tz_dsttime;               /* Type of dst correction       0x5C */
-        __u32 dcache_size;              /* L1 d-cache size              0x60 */
-        __u32 dcache_line_size;         /* L1 d-cache line size         0x64 */
-        __u32 icache_size;              /* L1 i-cache size              0x68 */
-        __u32 icache_line_size;         /* L1 i-cache line size         0x6C */
-
-        /* those additional ones don't have to be located anywhere
-         * special as they were not part of the original systemcfg
-         */
-        __u32 dcache_block_size;                /* L1 d-cache block size     */
-        __u32 icache_block_size;                /* L1 i-cache block size     */
-        __u32 dcache_log_block_size;            /* L1 d-cache log block size */
-        __u32 icache_log_block_size;            /* L1 i-cache log block size */
-        __s32 wtom_clock_sec;                   /* Wall to monotonic clock */
-        __s32 wtom_clock_nsec;
-        __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls  */
-        __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
-};
-
-#else /* CONFIG_PPC64 */
-
-/*
- * And here is the simpler 32 bits version
- */
-struct vdso_data {
-        __u64 tb_orig_stamp;            /* Timebase at boot             0x30 */
-        __u64 tb_ticks_per_sec;         /* Timebase tics / sec          0x38 */
-        __u64 tb_to_xs;                 /* Inverse of TB to 2^20        0x40 */
-        __u64 stamp_xsec;               /*                              0x48 */
-        __u32 tb_update_count;          /* Timebase atomicity ctr       0x50 */
-        __u32 tz_minuteswest;           /* Minutes west of Greenwich    0x58 */
-        __u32 tz_dsttime;               /* Type of dst correction       0x5C */
-        __s32 wtom_clock_sec;                   /* Wall to monotonic clock */
-        __s32 wtom_clock_nsec;
-        __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
-        __u32 dcache_block_size;        /* L1 d-cache block size     */
-        __u32 icache_block_size;        /* L1 i-cache block size     */
-        __u32 dcache_log_block_size;    /* L1 d-cache log block size */
-        __u32 icache_log_block_size;    /* L1 i-cache log block size */
-};
-
-#endif /* CONFIG_PPC64 */
-
-#ifdef __KERNEL__
-extern struct vdso_data *vdso_data;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _SYSTEMCFG_H */
diff --git a/include/asm-powerpc/vga.h b/include/asm-powerpc/vga.h
deleted file mode 100644
index a2eac409c1ec..000000000000
--- a/include/asm-powerpc/vga.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ASM_POWERPC_VGA_H_
-#define _ASM_POWERPC_VGA_H_
-
-#ifdef __KERNEL__
-
-/*
- *      Access to VGA videoram
- *
- *      (c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-
-#include <asm/io.h>
-
-
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
-
-#define VT_BUF_HAVE_RW
-/*
- *  These are only needed for supporting VGA or MDA text mode, which use little
- *  endian byte ordering.
- *  In other cases, we can optimize by using native byte ordering and
- *  <linux/vt_buffer.h> has already done the right job for us.
- */
-
-static inline void scr_writew(u16 val, volatile u16 *addr)
-{
-    st_le16(addr, val);
-}
-
-static inline u16 scr_readw(volatile const u16 *addr)
-{
-    return ld_le16(addr);
-}
-
-#define VT_BUF_HAVE_MEMCPYW
-#define scr_memcpyw     memcpy
-
-#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
-
-extern unsigned long vgacon_remap_base;
-
-#ifdef __powerpc64__
-#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s))
-#else
-#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base)
-#endif
-
-#define vga_readb(x) (*(x))
-#define vga_writeb(x,y) (*(y) = (x))
-
-#endif  /* __KERNEL__ */
-#endif  /* _ASM_POWERPC_VGA_H_ */
diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h
deleted file mode 100644
index 0a290a195946..000000000000
--- a/include/asm-powerpc/vio.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * IBM PowerPC Virtual I/O Infrastructure Support.
- *
- * Copyright (c) 2003 IBM Corp.
- *  Dave Engebretsen engebret@us.ibm.com
- *  Santiago Leon santil@us.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_VIO_H
-#define _ASM_POWERPC_VIO_H
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/mod_devicetable.h>
-
-#include <asm/hvcall.h>
-#include <asm/scatterlist.h>
-
-/*
- * Architecture-specific constants for drivers to
- * extract attributes of the device using vio_get_attribute()
- */
-#define VETH_MAC_ADDR "local-mac-address"
-#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
-
-/* End architecture-specific constants */
-
-#define h_vio_signal(ua, mode) \
-  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
-
-#define VIO_IRQ_DISABLE         0UL
-#define VIO_IRQ_ENABLE          1UL
-
-/*
- * VIO CMO minimum entitlement for all devices and spare entitlement
- */
-#define VIO_CMO_MIN_ENT 1562624
-
-struct iommu_table;
-
-/**
- * vio_dev - This structure is used to describe virtual I/O devices.
- *
- * @desired: set from return of driver's get_desired_dma() function
- * @entitled: bytes of IO data that has been reserved for this device.
- * @allocated: bytes of IO data currently in use by the device.
- * @allocs_failed: number of DMA failures due to insufficient entitlement.
- */
-struct vio_dev {
-        const char *name;
-        const char *type;
-        uint32_t unit_address;
-        unsigned int irq;
-        struct {
-                size_t desired;
-                size_t entitled;
-                size_t allocated;
-                atomic_t allocs_failed;
-        } cmo;
-        struct device dev;
-};
-
-struct vio_driver {
-        const struct vio_device_id *id_table;
-        int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
-        int (*remove)(struct vio_dev *dev);
-        /* A driver must have a get_desired_dma() function to
-         * be loaded in a CMO environment if it uses DMA.
-         */
-        unsigned long (*get_desired_dma)(struct vio_dev *dev);
-        struct device_driver driver;
-};
-
-extern int vio_register_driver(struct vio_driver *drv);
-extern void vio_unregister_driver(struct vio_driver *drv);
-
-extern int vio_cmo_entitlement_update(size_t);
-extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired);
-
-extern void __devinit vio_unregister_device(struct vio_dev *dev);
-
-struct device_node;
-
-extern struct vio_dev *vio_register_device_node(
-                struct device_node *node_vdev);
-extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
-                int *length);
-#ifdef CONFIG_PPC_PSERIES
-extern struct vio_dev *vio_find_node(struct device_node *vnode);
-extern int vio_enable_interrupts(struct vio_dev *dev);
-extern int vio_disable_interrupts(struct vio_dev *dev);
-#else
-static inline int vio_enable_interrupts(struct vio_dev *dev)
-{
-        return 0;
-}
-#endif
-
-static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
-{
-        return container_of(drv, struct vio_driver, driver);
-}
-
-static inline struct vio_dev *to_vio_dev(struct device *dev)
-{
-        return container_of(dev, struct vio_dev, dev);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_VIO_H */
diff --git a/include/asm-powerpc/xilinx_intc.h b/include/asm-powerpc/xilinx_intc.h
deleted file mode 100644
index 343612f8fece..000000000000
--- a/include/asm-powerpc/xilinx_intc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Xilinx intc external definitions
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_XILINX_INTC_H
-#define _ASM_POWERPC_XILINX_INTC_H
-
-#ifdef __KERNEL__
-
-extern void __init xilinx_intc_init_tree(void);
-extern unsigned int xilinx_intc_get_irq(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_XILINX_INTC_H */
diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h
deleted file mode 100644
index 5eb8e599e5cc..000000000000
--- a/include/asm-powerpc/xmon.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __ASM_POWERPC_XMON_H
-#define __ASM_POWERPC_XMON_H
-
-/*
- * Copyrignt (C) 2006 IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/irqreturn.h>
-
-#ifdef CONFIG_XMON
-extern void xmon_setup(void);
-extern void xmon_register_spus(struct list_head *list);
-struct pt_regs;
-extern int xmon(struct pt_regs *excp);
-extern irqreturn_t xmon_irq(int, void *);
-#else
-static inline void xmon_setup(void) { };
-static inline void xmon_register_spus(struct list_head *list) { };
-#endif
-
-#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
-extern int cpus_are_in_xmon(void);
-#endif
-
-#endif /* __KERNEL __ */
-#endif /* __ASM_POWERPC_XMON_H */
diff --git a/include/asm-powerpc/xor.h b/include/asm-powerpc/xor.h
deleted file mode 100644
index c82eb12a5b18..000000000000
--- a/include/asm-powerpc/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>