1 files changed, 63 insertions, 0 deletions

diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 971c7fa29614..6114007c8c74 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -13,6 +13,69 @@
 
 #include <linux/v4l2-mediabus.h>
 
+/* Parallel flags */
+/*
+ * Can the client run in master or in slave mode. By "Master mode" an operation
+ * mode is meant, when the client (e.g., a camera sensor) is producing
+ * horizontal and vertical synchronisation. In "Slave mode" the host is
+ * providing these signals to the slave.
+ */
+#define V4L2_MBUS_MASTER                        (1 << 0)
+#define V4L2_MBUS_SLAVE                         (1 << 1)
+/* Which signal polarities it supports */
+/* Note: in BT.656 mode HSYNC and VSYNC are unused */
+#define V4L2_MBUS_HSYNC_ACTIVE_HIGH             (1 << 2)
+#define V4L2_MBUS_HSYNC_ACTIVE_LOW              (1 << 3)
+#define V4L2_MBUS_VSYNC_ACTIVE_HIGH             (1 << 4)
+#define V4L2_MBUS_VSYNC_ACTIVE_LOW              (1 << 5)
+#define V4L2_MBUS_PCLK_SAMPLE_RISING            (1 << 6)
+#define V4L2_MBUS_PCLK_SAMPLE_FALLING           (1 << 7)
+#define V4L2_MBUS_DATA_ACTIVE_HIGH              (1 << 8)
+#define V4L2_MBUS_DATA_ACTIVE_LOW               (1 << 9)
+
+/* Serial flags */
+/* How many lanes the client can use */
+#define V4L2_MBUS_CSI2_1_LANE                   (1 << 0)
+#define V4L2_MBUS_CSI2_2_LANE                   (1 << 1)
+#define V4L2_MBUS_CSI2_3_LANE                   (1 << 2)
+#define V4L2_MBUS_CSI2_4_LANE                   (1 << 3)
+/* On which channels it can send video data */
+#define V4L2_MBUS_CSI2_CHANNEL_0                (1 << 4)
+#define V4L2_MBUS_CSI2_CHANNEL_1                (1 << 5)
+#define V4L2_MBUS_CSI2_CHANNEL_2                (1 << 6)
+#define V4L2_MBUS_CSI2_CHANNEL_3                (1 << 7)
+/* Does it support only continuous or also non-continuous clock mode */
+#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK         (1 << 8)
+#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK      (1 << 9)
+
+#define V4L2_MBUS_CSI2_LANES            (V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
+                                         V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
+#define V4L2_MBUS_CSI2_CHANNELS         (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
+                                         V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
+
+/**
+ * v4l2_mbus_type - media bus type
+ * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync
+ * @V4L2_MBUS_BT656:    parallel interface with embedded synchronisation, can
+ *                      also be used for BT.1120
+ * @V4L2_MBUS_CSI2:     MIPI CSI-2 serial interface
+ */
+enum v4l2_mbus_type {
+        V4L2_MBUS_PARALLEL,
+        V4L2_MBUS_BT656,
+        V4L2_MBUS_CSI2,
+};
+
+/**
+ * v4l2_mbus_config - media bus configuration
+ * @type:       in: interface type
+ * @flags:      in / out: configuration flags, depending on @type
+ */
+struct v4l2_mbus_config {
+        enum v4l2_mbus_type type;
+        unsigned int flags;
+};
+
 static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
                                 const struct v4l2_mbus_framefmt *mbus_fmt)
 {