1 files changed, 14 insertions, 127 deletions

diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 3a6905615d68..c48c24e4d0fa 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -125,7 +125,7 @@ int v4l2_chip_match_host(const struct v4l2_dbg_match *match);
 
 /* ------------------------------------------------------------------------- */
 
-/* Helper function for I2C legacy drivers */
+/* I2C Helper functions */
 
 struct i2c_driver;
 struct i2c_adapter;
@@ -135,21 +135,24 @@ struct v4l2_device;
 struct v4l2_subdev;
 struct v4l2_subdev_ops;
 
-int v4l2_i2c_attach(struct i2c_adapter *adapter, int address, struct i2c_driver *driver,
-                const char *name,
-                int (*probe)(struct i2c_client *, const struct i2c_device_id *));
 
 /* Load an i2c module and return an initialized v4l2_subdev struct.
    Only call request_module if module_name != NULL.
    The client_type argument is the name of the chip that's on the adapter. */
-struct v4l2_subdev *v4l2_i2c_new_subdev(struct i2c_adapter *adapter,
+struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
+                struct i2c_adapter *adapter,
                 const char *module_name, const char *client_type, u8 addr);
 /* Probe and load an i2c module and return an initialized v4l2_subdev struct.
    Only call request_module if module_name != NULL.
    The client_type argument is the name of the chip that's on the adapter. */
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct i2c_adapter *adapter,
+struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
+                struct i2c_adapter *adapter,
                 const char *module_name, const char *client_type,
                 const unsigned short *addrs);
+/* Like v4l2_i2c_new_probed_subdev, except probe for a single address. */
+struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
+                struct i2c_adapter *adapter,
+                const char *module_name, const char *client_type, u8 addr);
 /* Initialize an v4l2_subdev with data from an i2c_client struct */
 void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
                 const struct v4l2_subdev_ops *ops);
@@ -171,139 +174,23 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type);
 
 /* ------------------------------------------------------------------------- */
 
-/* Internal ioctls */
-
-/* VIDIOC_INT_DECODE_VBI_LINE */
-struct v4l2_decode_vbi_line {
-        u32 is_second_field;    /* Set to 0 for the first (odd) field,
-                                   set to 1 for the second (even) field. */
-        u8 *p;                  /* Pointer to the sliced VBI data from the decoder.
-                                   On exit points to the start of the payload. */
-        u32 line;               /* Line number of the sliced VBI data (1-23) */
-        u32 type;               /* VBI service type (V4L2_SLICED_*). 0 if no service found */
-};
+/* Note: these remaining ioctls/structs should be removed as well, but they are
+   still used in tuner-simple.c (TUNER_SET_CONFIG), cx18/ivtv (RESET) and
+   v4l2-int-device.h (v4l2_routing). To remove these ioctls some more cleanup
+   is needed in those modules. */
 
+/* s_config */
 struct v4l2_priv_tun_config {
         int tuner;
         void *priv;
 };
-
-/* audio ioctls */
-
-/* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */
-#define AUDC_SET_RADIO        _IO('d',88)
-
-/* tuner ioctls */
-
-/* Sets tuner type and its I2C addr */
-#define TUNER_SET_TYPE_ADDR          _IOW('d', 90, int)
-
-/* Puts tuner on powersaving state, disabling it, except for i2c. To be replaced
-   by VIDIOC_INT_S_STANDBY. */
-#define TUNER_SET_STANDBY            _IOW('d', 91, int)
-
-/* Sets tda9887 specific stuff, like port1, port2 and qss */
 #define TUNER_SET_CONFIG           _IOW('d', 92, struct v4l2_priv_tun_config)
 
-/* Switch the tuner to a specific tuner mode. Replacement of AUDC_SET_RADIO */
-#define VIDIOC_INT_S_TUNER_MODE      _IOW('d', 93, enum v4l2_tuner_type)
-
-/* Generic standby command. Passing -1 (all bits set to 1) will put the whole
-   chip into standby mode, value 0 will make the chip fully active. Specific
-   bits can be used by certain chips to enable/disable specific subsystems.
-   Replacement of TUNER_SET_STANDBY. */
-#define VIDIOC_INT_S_STANDBY         _IOW('d', 94, u32)
-
-/* 100, 101 used by  VIDIOC_DBG_[SG]_REGISTER */
-
-/* Generic reset command. The argument selects which subsystems to reset.
-   Passing 0 will always reset the whole chip. */
 #define VIDIOC_INT_RESET                _IOW ('d', 102, u32)
 
-/* Set the frequency (in Hz) of the audio clock output.
-   Used to slave an audio processor to the video decoder, ensuring that audio
-   and video remain synchronized.
-   Usual values for the frequency are 48000, 44100 or 32000 Hz.
-   If the frequency is not supported, then -EINVAL is returned. */
-#define VIDIOC_INT_AUDIO_CLOCK_FREQ     _IOW ('d', 103, u32)
-
-/* Video decoders that support sliced VBI need to implement this ioctl.
-   Field p of the v4l2_sliced_vbi_line struct is set to the start of the VBI
-   data that was generated by the decoder. The driver then parses the sliced
-   VBI data and sets the other fields in the struct accordingly. The pointer p
-   is updated to point to the start of the payload which can be copied
-   verbatim into the data field of the v4l2_sliced_vbi_data struct. If no
-   valid VBI data was found, then the type field is set to 0 on return. */
-#define VIDIOC_INT_DECODE_VBI_LINE      _IOWR('d', 104, struct v4l2_decode_vbi_line)
-
-/* Used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is
-   filled with the data packets that should be output. Note that if you set
-   the line field to 0, then that VBI signal is disabled. If no
-   valid VBI data was found, then the type field is set to 0 on return. */
-#define VIDIOC_INT_S_VBI_DATA           _IOW ('d', 105, struct v4l2_sliced_vbi_data)
-
-/* Used to obtain the sliced VBI packet from a readback register. Not all
-   video decoders support this. If no data is available because the readback
-   register contains invalid or erroneous data -EIO is returned. Note that
-   you must fill in the 'id' member and the 'field' member (to determine
-   whether CC data from the first or second field should be obtained). */
-#define VIDIOC_INT_G_VBI_DATA           _IOWR('d', 106, struct v4l2_sliced_vbi_data)
-
-/* Sets I2S speed in bps. This is used to provide a standard way to select I2S
-   clock used by driving digital audio streams at some board designs.
-   Usual values for the frequency are 1024000 and 2048000.
-   If the frequency is not supported, then -EINVAL is returned. */
-#define VIDIOC_INT_I2S_CLOCK_FREQ       _IOW ('d', 108, u32)
-
-/* Routing definition, device dependent. It specifies which inputs (if any)
-   should be routed to which outputs (if any). */
 struct v4l2_routing {
         u32 input;
         u32 output;
 };
 
-/* These internal commands should be used to define the inputs and outputs
-   of an audio/video chip. They will replace the v4l2 API commands
-   VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT, VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT
-   that are meant to be used by the user.
-   The internal commands should be used to switch inputs/outputs
-   because only the driver knows how to map a 'Television' input to the precise
-   input/output routing of an A/D converter, or a DSP, or a video digitizer.
-   These four commands should only be sent directly to an i2c device, they
-   should not be broadcast as the routing is very device specific. */
-#define VIDIOC_INT_S_AUDIO_ROUTING      _IOW ('d', 109, struct v4l2_routing)
-#define VIDIOC_INT_G_AUDIO_ROUTING      _IOR ('d', 110, struct v4l2_routing)
-#define VIDIOC_INT_S_VIDEO_ROUTING      _IOW ('d', 111, struct v4l2_routing)
-#define VIDIOC_INT_G_VIDEO_ROUTING      _IOR ('d', 112, struct v4l2_routing)
-
-struct v4l2_crystal_freq {
-        u32 freq;       /* frequency in Hz of the crystal */
-        u32 flags;      /* device specific flags */
-};
-
-/* Sets the frequency of the crystal used to generate the clocks.
-   An extra flags field allows device specific configuration regarding
-   clock frequency dividers, etc. If not used, then set flags to 0.
-   If the frequency is not supported, then -EINVAL is returned. */
-#define VIDIOC_INT_S_CRYSTAL_FREQ       _IOW('d', 113, struct v4l2_crystal_freq)
-
-/* Initialize the sensor registors to some sort of reasonable
-   default values. */
-#define VIDIOC_INT_INIT                 _IOW('d', 114, u32)
-
-/* Set v4l2_std_id for video OUTPUT devices. This is ignored by
-   video input devices. */
-#define VIDIOC_INT_S_STD_OUTPUT         _IOW('d', 115, v4l2_std_id)
-
-/* Get v4l2_std_id for video OUTPUT devices. This is ignored by
-   video input devices. */
-#define VIDIOC_INT_G_STD_OUTPUT         _IOW('d', 116, v4l2_std_id)
-
-/* Set GPIO pins. Very simple right now, might need to be extended with
-   a v4l2_gpio struct if a direction is also needed. */
-#define VIDIOC_INT_S_GPIO               _IOW('d', 117, u32)
-
-/* Get input status. Same as the status field in the v4l2_input struct. */
-#define VIDIOC_INT_G_INPUT_STATUS       _IOR('d', 118, u32)
-
 #endif /* V4L2_COMMON_H_ */