17 files changed, 146 insertions, 82 deletions

diff --git a/include/linux/cb710.h b/include/linux/cb710.h
index 63bc9a4d2926..8cc10411bab2 100644
--- a/include/linux/cb710.h
+++ b/include/linux/cb710.h
@@ -140,29 +140,6 @@ void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
 #include <linux/highmem.h>
 #include <linux/scatterlist.h>
 
-/**
- * cb710_sg_miter_stop_writing - stop mapping iteration after writing
- * @miter: sg mapping iter to be stopped
- *
- * Description:
- *   Stops mapping iterator @miter.  @miter should have been started
- *   started using sg_miter_start().  A stopped iteration can be
- *   resumed by calling sg_miter_next() on it.  This is useful when
- *   resources (kmap) need to be released during iteration.
- *
- *   This is a convenience wrapper that will be optimized out for arches
- *   that don't need flush_kernel_dcache_page().
- *
- * Context:
- *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
- */
-static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
-{
-        if (miter->page)
-                flush_kernel_dcache_page(miter->page);
-        sg_miter_stop(miter);
-}
-
 /*
  * 32-bit PIO mapping sg iterator
  *
@@ -171,12 +148,12 @@ static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
  * without DMA support).
  *
  * Best-case reading (transfer from device):
- *   sg_miter_start();
+ *   sg_miter_start(, SG_MITER_TO_SG);
  *   cb710_sg_dwiter_write_from_io();
- *   cb710_sg_miter_stop_writing();
+ *   sg_miter_stop();
  *
  * Best-case writing (transfer to device):
- *   sg_miter_start();
+ *   sg_miter_start(, SG_MITER_FROM_SG);
  *   cb710_sg_dwiter_read_to_io();
  *   sg_miter_stop();
  */
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 665fa70e4094..90bba9e62286 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -179,14 +179,11 @@ struct cgroup {
          */
         struct list_head release_list;
 
-        /* pids_mutex protects the fields below */
+        /* pids_mutex protects pids_list and cached pid arrays. */
         struct rw_semaphore pids_mutex;
-        /* Array of process ids in the cgroup */
-        pid_t *tasks_pids;
-        /* How many files are using the current tasks_pids array */
-        int pids_use_count;
-        /* Length of the current tasks_pids array */
-        int pids_length;
+
+        /* Linked list of struct cgroup_pids */
+        struct list_head pids_list;
 
         /* For RCU-protected deletion */
         struct rcu_head rcu_head;
@@ -366,6 +363,23 @@ int cgroup_task_count(const struct cgroup *cgrp);
 int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task);
 
 /*
+ * When the subsys has to access css and may add permanent refcnt to css,
+ * it should take care of racy conditions with rmdir(). Following set of
+ * functions, is for stop/restart rmdir if necessary.
+ * Because these will call css_get/put, "css" should be alive css.
+ *
+ *  cgroup_exclude_rmdir();
+ *  ...do some jobs which may access arbitrary empty cgroup
+ *  cgroup_release_and_wakeup_rmdir();
+ *
+ *  When someone removes a cgroup while cgroup_exclude_rmdir() holds it,
+ *  it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up.
+ */
+
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css);
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css);
+
+/*
  * Control Group subsystem type.
  * See Documentation/cgroups/cgroups.txt for details
  */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c56457c8334e..1219be4fb42e 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -293,7 +293,12 @@ static inline int clocksource_enable(struct clocksource *cs)
         if (cs->enable)
                 ret = cs->enable(cs);
 
-        /* save mult_orig on enable */
+        /*
+         * The frequency may have changed while the clocksource
+         * was disabled. If so the code in ->enable() must update
+         * the mult value to reflect the new frequency. Make sure
+         * mult_orig follows this change.
+         */
         cs->mult_orig = cs->mult;
 
         return ret;
@@ -309,6 +314,13 @@ static inline int clocksource_enable(struct clocksource *cs)
  */
 static inline void clocksource_disable(struct clocksource *cs)
 {
+        /*
+         * Save mult_orig in mult so clocksource_enable() can
+         * restore the value regardless if ->enable() updates
+         * the value of mult or not.
+         */
+        cs->mult = cs->mult_orig;
+
         if (cs->disable)
                 cs->disable(cs);
 }
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
new file mode 100644
index 000000000000..23c1ec79a31b
--- /dev/null
+++ b/include/linux/flex_array.h
@@ -0,0 +1,47 @@
+#ifndef _FLEX_ARRAY_H
+#define _FLEX_ARRAY_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
+#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
+
+struct flex_array_part;
+
+/*
+ * This is meant to replace cases where an array-like
+ * structure has gotten too big to fit into kmalloc()
+ * and the developer is getting tempted to use
+ * vmalloc().
+ */
+
+struct flex_array {
+        union {
+                struct {
+                        int element_size;
+                        int total_nr_elements;
+                        struct flex_array_part *parts[0];
+                };
+                /*
+                 * This little trick makes sure that
+                 * sizeof(flex_array) == PAGE_SIZE
+                 */
+                char padding[FLEX_ARRAY_BASE_SIZE];
+        };
+};
+
+#define FLEX_ARRAY_INIT(size, total) { { {\
+        .element_size = (size),         \
+        .total_nr_elements = (total),   \
+} } }
+
+struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags);
+void flex_array_free(struct flex_array *fa);
+void flex_array_free_parts(struct flex_array *fa);
+int flex_array_put(struct flex_array *fa, int element_nr, void *src,
+                gfp_t flags);
+void *flex_array_get(struct flex_array *fa, int element_nr);
+
+#endif /* _FLEX_ARRAY_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0872372184fe..a36ffa5a77a4 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1946,6 +1946,7 @@ extern void putname(const char *name);
 extern int register_blkdev(unsigned int, const char *);
 extern void unregister_blkdev(unsigned int, const char *);
 extern struct block_device *bdget(dev_t);
+extern struct block_device *bdgrab(struct block_device *bdev);
 extern void bd_set_size(struct block_device *, loff_t size);
 extern void bd_forget(struct inode *inode);
 extern void bdput(struct block_device *);
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dd05434fa45f..4da4a75c3f1e 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -92,7 +92,7 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc)
          * a race).
          */
         if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
-                atomic_long_inc(&ioc->refcount);
+                atomic_inc(&ioc->nr_tasks);
                 return ioc;
         }
 
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index dbf2479e808e..2fb1dcbcb5aa 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -1,5 +1,7 @@
-/* Things the lguest guest needs to know.  Note: like all lguest interfaces,
- * this is subject to wild and random change between versions. */
+/*
+ * Things the lguest guest needs to know.  Note: like all lguest interfaces,
+ * this is subject to wild and random change between versions.
+ */
 #ifndef _LINUX_LGUEST_H
 #define _LINUX_LGUEST_H
 
@@ -11,32 +13,41 @@
 #define LG_CLOCK_MIN_DELTA      100UL
 #define LG_CLOCK_MAX_DELTA      ULONG_MAX
 
-/*G:031 The second method of communicating with the Host is to via "struct
+/*G:031
+ * The second method of communicating with the Host is to via "struct
  * lguest_data".  Once the Guest's initialization hypercall tells the Host where
- * this is, the Guest and Host both publish information in it. :*/
-struct lguest_data
-{
-        /* 512 == enabled (same as eflags in normal hardware).  The Guest
-         * changes interrupts so often that a hypercall is too slow. */
+ * this is, the Guest and Host both publish information in it.
+:*/
+struct lguest_data {
+        /*
+         * 512 == enabled (same as eflags in normal hardware).  The Guest
+         * changes interrupts so often that a hypercall is too slow.
+         */
         unsigned int irq_enabled;
         /* Fine-grained interrupt disabling by the Guest */
         DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS);
 
-        /* The Host writes the virtual address of the last page fault here,
+        /*
+         * The Host writes the virtual address of the last page fault here,
          * which saves the Guest a hypercall.  CR2 is the native register where
-         * this address would normally be found. */
+         * this address would normally be found.
+         */
         unsigned long cr2;
 
         /* Wallclock time set by the Host. */
         struct timespec time;
 
-        /* Interrupt pending set by the Host.  The Guest should do a hypercall
-         * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+        /*
+         * Interrupt pending set by the Host.  The Guest should do a hypercall
+         * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF).
+         */
         int irq_pending;
 
-        /* Async hypercall ring.  Instead of directly making hypercalls, we can
+        /*
+         * Async hypercall ring.  Instead of directly making hypercalls, we can
          * place them in here for processing the next time the Host wants.
-         * This batching can be quite efficient. */
+         * This batching can be quite efficient.
+         */
 
         /* 0xFF == done (set by Host), 0 == pending (set by Guest). */
         u8 hcall_status[LHCALL_RING_SIZE];
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index bfefbdf7498a..495203ff221c 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -29,8 +29,10 @@ struct lguest_device_desc {
         __u8 type;
         /* The number of virtqueues (first in config array) */
         __u8 num_vq;
-        /* The number of bytes of feature bits.  Multiply by 2: one for host
-         * features and one for Guest acknowledgements. */
+        /*
+         * The number of bytes of feature bits.  Multiply by 2: one for host
+         * features and one for Guest acknowledgements.
+         */
         __u8 feature_len;
         /* The number of bytes of the config array after virtqueues. */
         __u8 config_len;
@@ -39,8 +41,10 @@ struct lguest_device_desc {
         __u8 config[0];
 };
 
-/*D:135 This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space. */
+/*D:135
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
 struct lguest_vqconfig {
         /* The number of entries in the virtio_ring */
         __u16 num;
@@ -61,7 +65,9 @@ enum lguest_req
         LHREQ_EVENTFD, /* + address, fd. */
 };
 
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize for historical reasons. */
+/*
+ * The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize for historical reasons.
+ */
 #define LGUEST_VRING_ALIGN      4096
 #endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 79b6d7fd4ac2..e5b6e33c6571 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -589,6 +589,7 @@ struct ata_device {
 #endif
         /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
         u64                     n_sectors;      /* size of device, if ATA */
+        u64                     n_native_sectors; /* native size, if ATA */
         unsigned int            class;          /* ATA_DEV_xxx */
         unsigned long           unpark_deadline;
 
diff --git a/include/linux/pps.h b/include/linux/pps.h
index cfe5c7214ec6..0194ab06177b 100644
--- a/include/linux/pps.h
+++ b/include/linux/pps.h
@@ -22,6 +22,8 @@
 #ifndef _PPS_H_
 #define _PPS_H_
 
+#include <linux/types.h>
+
 #define PPS_VERSION             "5.3.6"
 #define PPS_MAX_SOURCES         16              /* should be enough... */
 
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index e5996984ddd0..9aaf5bfdad1a 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -242,6 +242,8 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
  */
 
 #define SG_MITER_ATOMIC         (1 << 0)         /* use kmap_atomic */
+#define SG_MITER_TO_SG          (1 << 1)        /* flush back to phys on unmap */
+#define SG_MITER_FROM_SG        (1 << 2)        /* nop */
 
 struct sg_mapping_iter {
         /* the following three fields can be accessed directly */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1488d8c81aac..e8c6c9136c97 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -394,6 +394,7 @@ extern void __do_SAK(struct tty_struct *tty);
 extern void disassociate_ctty(int priv);
 extern void no_tty(void);
 extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_flush_to_ldisc(struct tty_struct *tty);
 extern void tty_buffer_free_all(struct tty_struct *tty);
 extern void tty_buffer_flush(struct tty_struct *tty);
 extern void tty_buffer_init(struct tty_struct *tty);
diff --git a/include/linux/uio.h b/include/linux/uio.h
index b7fe13883bdb..98c114323a8b 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -19,15 +19,6 @@ struct iovec
         __kernel_size_t iov_len; /* Must be size_t (1003.1g) */
 };
 
-#ifdef __KERNEL__
-
-struct kvec {
-        void *iov_base; /* and that should *never* hold a userland pointer */
-        size_t iov_len;
-};
-
-#endif
-
 /*
  *      UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
  */
@@ -35,6 +26,13 @@ struct kvec {
 #define UIO_FASTIOV     8
 #define UIO_MAXIOV      1024
 
+#ifdef __KERNEL__
+
+struct kvec {
+        void *iov_base; /* and that should *never* hold a userland pointer */
+        size_t iov_len;
+};
+
 /*
  * Total number of bytes covered by an iovec.
  *
@@ -53,5 +51,6 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
 }
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+#endif
 
 #endif
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index be7d255fc7cf..8dab9f2b8832 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -20,8 +20,7 @@
 
 #define VIRTIO_BLK_ID_BYTES     (sizeof(__u16[256]))    /* IDENTIFY DATA */
 
-struct virtio_blk_config
-{
+struct virtio_blk_config {
         /* The capacity (in 512-byte sectors). */
         __u64 capacity;
         /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
@@ -50,8 +49,7 @@ struct virtio_blk_config
 #define VIRTIO_BLK_T_BARRIER    0x80000000
 
 /* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr
-{
+struct virtio_blk_outhdr {
         /* VIRTIO_BLK_T* */
         __u32 type;
         /* io priority. */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 99f514575f6a..e547e3c8ee9a 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -79,8 +79,7 @@
  *      the dev->feature bits if it wants.
  */
 typedef void vq_callback_t(struct virtqueue *);
-struct virtio_config_ops
-{
+struct virtio_config_ops {
         void (*get)(struct virtio_device *vdev, unsigned offset,
                     void *buf, unsigned len);
         void (*set)(struct virtio_device *vdev, unsigned offset,
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 9c543d6ac535..d8dd539c9f48 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -31,8 +31,7 @@
 
 #define VIRTIO_NET_S_LINK_UP    1       /* Link is up */
 
-struct virtio_net_config
-{
+struct virtio_net_config {
         /* The config defining mac address (if VIRTIO_NET_F_MAC) */
         __u8 mac[6];
         /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
@@ -41,8 +40,7 @@ struct virtio_net_config
 
 /* This is the first element of the scatter-gather list.  If you don't
  * specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr
-{
+struct virtio_net_hdr {
 #define VIRTIO_NET_HDR_F_NEEDS_CSUM     1       // Use csum_start, csum_offset
         __u8 flags;
 #define VIRTIO_NET_HDR_GSO_NONE         0       // Not a GSO frame
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 693e0ec5afa6..e4d144b132b5 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -30,8 +30,7 @@
 #define VIRTIO_RING_F_INDIRECT_DESC     28
 
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
-struct vring_desc
-{
+struct vring_desc {
         /* Address (guest-physical). */
         __u64 addr;
         /* Length. */
@@ -42,24 +41,21 @@ struct vring_desc
         __u16 next;
 };
 
-struct vring_avail
-{
+struct vring_avail {
         __u16 flags;
         __u16 idx;
         __u16 ring[];
 };
 
 /* u32 is used here for ids for padding reasons. */
-struct vring_used_elem
-{
+struct vring_used_elem {
         /* Index of start of used descriptor chain. */
         __u32 id;
         /* Total length of the descriptor chain which was used (written to) */
         __u32 len;
 };
 
-struct vring_used
-{
+struct vring_used {
         __u16 flags;
         __u16 idx;
         struct vring_used_elem ring[];