8 files changed, 134 insertions, 80 deletions

diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 788850ba4e75..1fbdea4f08eb 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -142,19 +142,6 @@ struct CYZ_BOOT_CTRL {
 
 
 #ifndef DP_WINDOW_SIZE
-/* #include "cyclomz.h" */
-/****************** ****************** *******************/
-/*
- *      The data types defined below are used in all ZFIRM interface
- *      data structures. They accomodate differences between HW
- *      architectures and compilers.
- */
-
-typedef __u64  ucdouble;                /* 64 bits, unsigned */
-typedef __u32  uclong;                  /* 32 bits, unsigned */
-typedef __u16  ucshort;         /* 16 bits, unsigned */
-typedef __u8   ucchar;                  /* 8 bits, unsigned */
-
 /*
  *      Memory Window Sizes
  */
@@ -507,16 +494,20 @@ struct ZFW_CTRL {
 
 /* Per card data structure */
 struct cyclades_card {
-    void __iomem *base_addr;
-    void __iomem *ctl_addr;
-    int irq;
-    unsigned int num_chips;     /* 0 if card absent, -1 if Z/PCI, else Y */
-    unsigned int first_line;    /* minor number of first channel on card */
-    unsigned int nports;        /* Number of ports in the card */
-    int bus_index;              /* address shift - 0 for ISA, 1 for PCI */
-    int intr_enabled;           /* FW Interrupt flag - 0 disabled, 1 enabled */
-    spinlock_t card_lock;
-    struct cyclades_port *ports;
+        void __iomem *base_addr;
+        union {
+                void __iomem *p9050;
+                struct RUNTIME_9060 __iomem *p9060;
+        } ctl_addr;
+        int irq;
+        unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
+        unsigned int first_line;        /* minor number of first channel on card */
+        unsigned int nports;    /* Number of ports in the card */
+        int bus_index;          /* address shift - 0 for ISA, 1 for PCI */
+        int intr_enabled;               /* FW Interrupt flag - 0 disabled, 1 enabled */
+        u32 hw_ver;
+        spinlock_t card_lock;
+        struct cyclades_port *ports;
 };
 
 /***************************************
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 0f71812d67d3..d7d1c41a0b17 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1996,10 +1996,12 @@
 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U        0xC118
 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU       0xC11C
 #define PCI_DEVICE_ID_OXSEMI_16PCI954   0x9501
+#define PCI_DEVICE_ID_OXSEMI_C950       0x950B
 #define PCI_DEVICE_ID_OXSEMI_16PCI95N   0x9511
 #define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513
 #define PCI_DEVICE_ID_OXSEMI_16PCI952   0x9521
 #define PCI_DEVICE_ID_OXSEMI_16PCI952PP 0x9523
+#define PCI_SUBDEVICE_ID_OXSEMI_C950    0x0001
 
 #define PCI_VENDOR_ID_CHELSIO           0x1425
 
diff --git a/include/linux/rational.h b/include/linux/rational.h
new file mode 100644
index 000000000000..4f532fcd9eea
--- /dev/null
+++ b/include/linux/rational.h
@@ -0,0 +1,19 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers,
+ * e.g. when calculating optimum numerator/denominator pairs for
+ * pll configuration taking into account restricted register size
+ */
+
+#ifndef _LINUX_RATIONAL_H
+#define _LINUX_RATIONAL_H
+
+void rational_best_approximation(
+        unsigned long given_numerator, unsigned long given_denominator,
+        unsigned long max_numerator, unsigned long max_denominator,
+        unsigned long *best_numerator, unsigned long *best_denominator);
+
+#endif /* _LINUX_RATIONAL_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 9136cc5608c3..e5bb75a63802 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -96,54 +96,76 @@ struct serial_uart_config {
 
 /*
  * Definitions for async_struct (and serial_struct) flags field
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
  */
-#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
-                                   on the callout port */
-#define ASYNC_FOURPORT  0x0002  /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNC_SAK       0x0004  /* Secure Attention Key (Orange book) */
-#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define ASYNC_SPD_MASK  0x1030
-#define ASYNC_SPD_HI    0x0010  /* Use 56000 instead of 38400 bps */
-
-#define ASYNC_SPD_VHI   0x0020  /* Use 115200 instead of 38400 bps */
-#define ASYNC_SPD_CUST  0x0030  /* Use user-specified divisor */
-
-#define ASYNC_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */
-#define ASYNC_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define ASYNC_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define ASYNC_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define ASYNC_HARDPPS_CD        0x0800  /* Call hardpps when CD goes high  */
-
-#define ASYNC_SPD_SHI   0x1000  /* Use 230400 instead of 38400 bps */
-#define ASYNC_SPD_WARP  0x1010  /* Use 460800 instead of 38400 bps */
-
-#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
-
-#define ASYNC_BUGGY_UART  0x4000 /* This is a buggy UART, skip some safety
-                                  * checks.  Note: can be dangerous! */
-
-#define ASYNC_AUTOPROBE  0x8000 /* Port was autoprobed by PCI or PNP code */
-
-#define ASYNC_FLAGS     0x7FFF  /* Possible legal async flags */
-#define ASYNC_USR_MASK  0x3430  /* Legal flags that non-privileged
-                                 * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define ASYNC_INITIALIZED       0x80000000 /* Serial port was initialized */
-#define ASYNC_NORMAL_ACTIVE     0x20000000 /* Normal device is active */
-#define ASYNC_BOOT_AUTOCONF     0x10000000 /* Autoconfigure port on bootup */
-#define ASYNC_CLOSING           0x08000000 /* Serial port is closing */
-#define ASYNC_CTS_FLOW          0x04000000 /* Do CTS flow control */
-#define ASYNC_CHECK_CD          0x02000000 /* i.e., CLOCAL */
-#define ASYNC_SHARE_IRQ         0x01000000 /* for multifunction cards
-                                             --- no longer used */
-#define ASYNC_CONS_FLOW         0x00800000 /* flow control for console  */
-
-#define ASYNC_BOOT_ONLYMCA      0x00400000 /* Probe only if MCA bus */
-#define ASYNC_INTERNAL_FLAGS    0xFFC00000 /* Internal flags */
+#define ASYNCB_HUP_NOTIFY        0 /* Notify getty on hangups and closes
+                                    * on the callout port */
+#define ASYNCB_FOURPORT          1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK               2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS     3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI            4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI           5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST         6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ          7 /* Do automatic IRQ during
+                                    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT   8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT      9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP    10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD       11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI          12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY      13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART       14 /* This is a buggy UART, skip some safety
+                                    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE        15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER        15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED      31 /* Serial port was initialized */
+#define ASYNCB_NORMAL_ACTIVE    29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF    28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING          27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW         26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD         25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ        24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW        23 /* flow control for console  */
+#define ASYNCB_BOOT_ONLYMCA     22 /* Probe only if MCA bus */
+#define ASYNCB_FIRST_KERNEL     22
+
+#define ASYNC_HUP_NOTIFY        (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_FOURPORT          (1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK               (1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS     (1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI            (1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI           (1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST         (1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ          (1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT   (1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT      (1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP     (1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD        (1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI           (1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY       (1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART        (1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE         (1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS             ((1U << ASYNCB_LAST_USER) - 1)
+#define ASYNC_USR_MASK          (ASYNC_SPD_HI|ASYNC_SPD_VHI| \
+                ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST          (ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP          (ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK          (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED       (1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE     (1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF     (1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING           (1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW          (1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD          (1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ         (1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW         (1U << ASYNCB_CONS_FLOW)
+#define ASYNC_BOOT_ONLYMCA      (1U << ASYNCB_BOOT_ONLYMCA)
+#define ASYNC_INTERNAL_FLAGS    (~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 57a97e52e58d..6fd80c4243f1 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -41,7 +41,8 @@
 #define PORT_XSCALE     15
 #define PORT_RM9000     16      /* PMC-Sierra RM9xxx internal UART */
 #define PORT_OCTEON     17      /* Cavium OCTEON internal UART */
-#define PORT_MAX_8250   17      /* max port ID */
+#define PORT_AR7        18      /* Texas Instruments AR7 internal UART */
+#define PORT_MAX_8250   18      /* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
@@ -167,6 +168,9 @@
 /* MAX3100 */
 #define PORT_MAX3100    86
 
+/* Timberdale UART */
+#define PORT_TIMBUART   87
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/tty.h b/include/linux/tty.h
index fc39db95499f..1488d8c81aac 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -185,7 +185,7 @@ struct tty_port;
 struct tty_port_operations {
         /* Return 1 if the carrier is raised */
         int (*carrier_raised)(struct tty_port *port);
-        void (*raise_dtr_rts)(struct tty_port *port);
+        void (*dtr_rts)(struct tty_port *port, int raise);
 };
         
 struct tty_port {
@@ -201,6 +201,9 @@ struct tty_port {
         unsigned char           *xmit_buf;      /* Optional buffer */
         int                     close_delay;    /* Close port delay */
         int                     closing_wait;   /* Delay for output */
+        int                     drain_delay;    /* Set to zero if no pure time
+                                                   based drain is needed else
+                                                   set to size of fifo */
 };
 
 /*
@@ -223,8 +226,11 @@ struct tty_struct {
         struct tty_driver *driver;
         const struct tty_operations *ops;
         int index;
-        /* The ldisc objects are protected by tty_ldisc_lock at the moment */
-        struct tty_ldisc ldisc;
+
+        /* Protects ldisc changes: Lock tty not pty */
+        struct mutex ldisc_mutex;
+        struct tty_ldisc *ldisc;
+
         struct mutex termios_mutex;
         spinlock_t ctrl_lock;
         /* Termios values are protected by the termios mutex */
@@ -311,6 +317,7 @@ struct tty_struct {
 #define TTY_CLOSING             7       /* ->close() in progress */
 #define TTY_LDISC               9       /* Line discipline attached */
 #define TTY_LDISC_CHANGING      10      /* Line discipline changing */
+#define TTY_LDISC_OPEN          11      /* Line discipline is open */
 #define TTY_HW_COOK_OUT         14      /* Hardware can do output cooking */
 #define TTY_HW_COOK_IN          15      /* Hardware can do input cooking */
 #define TTY_PTY_LOCK            16      /* pty private */
@@ -403,6 +410,7 @@ extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
 extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
 extern void tty_ldisc_deref(struct tty_ldisc *);
 extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
+extern void tty_ldisc_hangup(struct tty_struct *tty);
 extern const struct file_operations tty_ldiscs_proc_fops;
 
 extern void tty_wakeup(struct tty_struct *tty);
@@ -425,6 +433,9 @@ extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
 extern void tty_release_dev(struct file *filp);
 extern int tty_init_termios(struct tty_struct *tty);
 
+extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
+extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
+
 extern struct mutex tty_mutex;
 
 extern void tty_write_unlock(struct tty_struct *tty);
@@ -438,6 +449,7 @@ extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
 extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
 extern int tty_port_carrier_raised(struct tty_port *port);
 extern void tty_port_raise_dtr_rts(struct tty_port *port);
+extern void tty_port_lower_dtr_rts(struct tty_port *port);
 extern void tty_port_hangup(struct tty_port *port);
 extern int tty_port_block_til_ready(struct tty_port *port,
                                 struct tty_struct *tty, struct file *filp);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index bcba84ea2d86..3566129384a4 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -127,7 +127,8 @@
  *      the line discipline are close to full, and it should somehow
  *      signal that no more characters should be sent to the tty.
  *
- *      Optional: Always invoke via tty_throttle();
+ *      Optional: Always invoke via tty_throttle(), called under the
+ *      termios lock.
  * 
  * void (*unthrottle)(struct tty_struct * tty);
  *
@@ -135,7 +136,8 @@
  *      that characters can now be sent to the tty without fear of
  *      overrunning the input buffers of the line disciplines.
  * 
- *      Optional: Always invoke via tty_unthrottle();
+ *      Optional: Always invoke via tty_unthrottle(), called under the
+ *      termios lock.
  *
  * void (*stop)(struct tty_struct *tty);
  *
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 625e9e4639c6..8cdfed738fe4 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -224,8 +224,7 @@ struct usb_serial_driver {
         /* Called by console with tty = NULL and by tty */
         int  (*open)(struct tty_struct *tty,
                         struct usb_serial_port *port, struct file *filp);
-        void (*close)(struct tty_struct *tty,
-                        struct usb_serial_port *port, struct file *filp);
+        void (*close)(struct usb_serial_port *port);
         int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
                         const unsigned char *buf, int count);
         /* Called only by the tty layer */
@@ -241,6 +240,10 @@ struct usb_serial_driver {
         int  (*tiocmget)(struct tty_struct *tty, struct file *file);
         int  (*tiocmset)(struct tty_struct *tty, struct file *file,
                          unsigned int set, unsigned int clear);
+        /* Called by the tty layer for port level work. There may or may not
+           be an attached tty at this point */
+        void (*dtr_rts)(struct usb_serial_port *port, int on);
+        int  (*carrier_raised)(struct usb_serial_port *port);
         /* USB events */
         void (*read_int_callback)(struct urb *urb);
         void (*write_int_callback)(struct urb *urb);
@@ -283,8 +286,7 @@ extern int usb_serial_generic_open(struct tty_struct *tty,
                 struct usb_serial_port *port, struct file *filp);
 extern int usb_serial_generic_write(struct tty_struct *tty,
         struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct tty_struct *tty,
-                        struct usb_serial_port *port, struct file *filp);
+extern void usb_serial_generic_close(struct usb_serial_port *port);
 extern int usb_serial_generic_resume(struct usb_serial *serial);
 extern int usb_serial_generic_write_room(struct tty_struct *tty);
 extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);