1 files changed, 112 insertions, 0 deletions

diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
new file mode 100644
index 000000000000..3675e03b1539
--- /dev/null
+++ b/include/linux/usb/msm_hsusb.h
@@ -0,0 +1,112 @@
+/* linux/include/asm-arm/arch-msm/hsusb.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HSUSB_H
+#define __ASM_ARCH_MSM_HSUSB_H
+
+#include <linux/types.h>
+#include <linux/usb/otg.h>
+
+/**
+ * Supported USB modes
+ *
+ * USB_PERIPHERAL       Only peripheral mode is supported.
+ * USB_HOST             Only host mode is supported.
+ * USB_OTG              OTG mode is supported.
+ *
+ */
+enum usb_mode_type {
+        USB_NONE = 0,
+        USB_PERIPHERAL,
+        USB_HOST,
+        USB_OTG,
+};
+
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL       Id/VBUS notifications not required. Useful in host
+ *                      only configuration.
+ * OTG_PHY_CONTROL      Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL     Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL     Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+        OTG_NO_CONTROL = 0,
+        OTG_PHY_CONTROL,
+        OTG_PMIC_CONTROL,
+        OTG_USER_CONTROL,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ *              for msm72k_otg driver.
+ * @phy_init_seq: PHY configuration sequence. val, reg pairs
+ *              terminated by -1.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ * @default_mode: Default operational mode. Applicable only if
+ *              OTG switch is controller by user.
+ *
+ */
+struct msm_otg_platform_data {
+        int *phy_init_seq;
+        void (*vbus_power)(bool on);
+        unsigned power_budget;
+        enum usb_mode_type mode;
+        enum otg_control_type otg_control;
+        enum usb_mode_type default_mode;
+        void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @phy_reset_clk: clock struct of usb_phy_clk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ *
+ */
+struct msm_otg {
+        struct otg_transceiver otg;
+        struct msm_otg_platform_data *pdata;
+        int irq;
+        struct clk *clk;
+        struct clk *pclk;
+        struct clk *phy_reset_clk;
+        struct clk *core_clk;
+        void __iomem *regs;
+#define ID              0
+#define B_SESS_VLD      1
+        unsigned long inputs;
+        struct work_struct sm_work;
+        atomic_t in_lpm;
+        int async_int;
+};
+
+#endif