1 files changed, 19 insertions, 12 deletions

diff --git a/include/linux/usb.h b/include/linux/usb.h
index b1e3c2fbfe11..a34fa89f1474 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -195,7 +195,7 @@ struct usb_interface {
 
         struct device dev;              /* interface specific device info */
         struct device *usb_dev;
-        int pm_usage_cnt;               /* usage counter for autosuspend */
+        atomic_t pm_usage_cnt;          /* usage counter for autosuspend */
         struct work_struct reset_ws;    /* for resets in atomic context */
 };
 #define to_usb_interface(d) container_of(d, struct usb_interface, dev)
@@ -551,13 +551,13 @@ extern void usb_autopm_put_interface_async(struct usb_interface *intf);
 
 static inline void usb_autopm_enable(struct usb_interface *intf)
 {
-        intf->pm_usage_cnt = 0;
+        atomic_set(&intf->pm_usage_cnt, 0);
         usb_autopm_set_interface(intf);
 }
 
 static inline void usb_autopm_disable(struct usb_interface *intf)
 {
-        intf->pm_usage_cnt = 1;
+        atomic_set(&intf->pm_usage_cnt, 1);
         usb_autopm_set_interface(intf);
 }
 
@@ -922,7 +922,7 @@ extern struct bus_type usb_bus_type;
 /**
  * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
  * @name: the usb class device name for this driver.  Will show up in sysfs.
- * @nodename: Callback to provide a naming hint for a possible
+ * @devnode: Callback to provide a naming hint for a possible
  *      device node to create.
  * @fops: pointer to the struct file_operations of this driver.
  * @minor_base: the start of the minor range for this driver.
@@ -933,7 +933,7 @@ extern struct bus_type usb_bus_type;
  */
 struct usb_class_driver {
         char *name;
-        char *(*nodename)(struct device *dev);
+        char *(*devnode)(struct device *dev, mode_t *mode);
         const struct file_operations *fops;
         int minor_base;
 };
@@ -1036,9 +1036,10 @@ typedef void (*usb_complete_t)(struct urb *);
  * @transfer_flags: A variety of flags may be used to affect how URB
  *      submission, unlinking, or operation are handled.  Different
  *      kinds of URB can use different flags.
- * @transfer_buffer:  This identifies the buffer to (or from) which
- *      the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP
- *      is set).  This buffer must be suitable for DMA; allocate it with
+ * @transfer_buffer:  This identifies the buffer to (or from) which the I/O
+ *      request will be performed unless URB_NO_TRANSFER_DMA_MAP is set
+ *      (however, do not leave garbage in transfer_buffer even then).
+ *      This buffer must be suitable for DMA; allocate it with
  *      kmalloc() or equivalent.  For transfers to "in" endpoints, contents
  *      of this buffer will be modified.  This buffer is used for the data
  *      stage of control transfers.
@@ -1071,7 +1072,7 @@ typedef void (*usb_complete_t)(struct urb *);
  * @start_frame: Returns the initial frame for isochronous transfers.
  * @number_of_packets: Lists the number of ISO transfer buffers.
  * @interval: Specifies the polling interval for interrupt or isochronous
- *      transfers.  The units are frames (milliseconds) for for full and low
+ *      transfers.  The units are frames (milliseconds) for full and low
  *      speed devices, and microframes (1/8 millisecond) for highspeed ones.
  * @error_count: Returns the number of ISO transfers that reported errors.
  * @context: For use in completion functions.  This normally points to
@@ -1104,9 +1105,15 @@ typedef void (*usb_complete_t)(struct urb *);
  * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
  * When these transfer flags are provided, host controller drivers will
  * attempt to use the dma addresses found in the transfer_dma and/or
- * setup_dma fields rather than determining a dma address themselves.  (Note
- * that transfer_buffer and setup_packet must still be set because not all
- * host controllers use DMA, nor do virtual root hubs).
+ * setup_dma fields rather than determining a dma address themselves.
+ *
+ * Note that transfer_buffer must still be set if the controller
+ * does not support DMA (as indicated by bus.uses_dma) and when talking
+ * to root hub. If you have to trasfer between highmem zone and the device
+ * on such controller, create a bounce buffer or bail out with an error.
+ * If transfer_buffer cannot be set (is in highmem) and the controller is DMA
+ * capable, assign NULL to it, so that usbmon knows not to use the value.
+ * The setup_packet must always be set, so it cannot be located in highmem.
  *
  * Initialization:
  *