1 files changed, 52 insertions, 23 deletions

diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 51a6769114df..c851b3d13208 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -20,13 +20,8 @@
 #define __LINUX_SPI_H
 
 /*
- * INTERFACES between SPI master drivers and infrastructure
+ * INTERFACES between SPI master-side drivers and SPI infrastructure.
  * (There's no SPI slave support for Linux yet...)
- *
- * A "struct device_driver" for an spi_device uses "spi_bus_type" and
- * needs no special API wrappers (much like platform_bus).  These drivers
- * are bound to devices based on their names (much like platform_bus),
- * and are available in dev->driver.
  */
 extern struct bus_type spi_bus_type;
 
@@ -46,8 +41,8 @@ extern struct bus_type spi_bus_type;
  * @irq: Negative, or the number passed to request_irq() to receive
  *      interrupts from this device.
  * @controller_state: Controller's runtime state
- * @controller_data: Static board-specific definitions for controller, such
- *      as FIFO initialization parameters; from board_info.controller_data
+ * @controller_data: Board-specific definitions for controller, such as
+ *      FIFO initialization parameters; from board_info.controller_data
  *
  * An spi_device is used to interchange data between an SPI slave
  * (usually a discrete chip) and CPU memory.
@@ -63,31 +58,32 @@ struct spi_device {
         u32                     max_speed_hz;
         u8                      chip_select;
         u8                      mode;
-#define SPI_CPHA        0x01            /* clock phase */
-#define SPI_CPOL        0x02            /* clock polarity */
+#define SPI_CPHA        0x01                    /* clock phase */
+#define SPI_CPOL        0x02                    /* clock polarity */
 #define SPI_MODE_0      (0|0)
-#define SPI_MODE_1      (0|SPI_CPHA)
+#define SPI_MODE_1      (0|SPI_CPHA)            /* (original MicroWire) */
 #define SPI_MODE_2      (SPI_CPOL|0)
 #define SPI_MODE_3      (SPI_CPOL|SPI_CPHA)
-#define SPI_CS_HIGH     0x04            /* chipselect active high? */
+#define SPI_CS_HIGH     0x04                    /* chipselect active high? */
         u8                      bits_per_word;
         int                     irq;
         void                    *controller_state;
-        const void              *controller_data;
+        void                    *controller_data;
         const char              *modalias;
 
         // likely need more hooks for more protocol options affecting how
-        // the controller talks to its chips, like:
+        // the controller talks to each chip, like:
         //  - bit order (default is wordwise msb-first)
         //  - memory packing (12 bit samples into low bits, others zeroed)
         //  - priority
+        //  - drop chipselect after each word
         //  - chipselect delays
         //  - ...
 };
 
 static inline struct spi_device *to_spi_device(struct device *dev)
 {
-        return container_of(dev, struct spi_device, dev);
+        return dev ? container_of(dev, struct spi_device, dev) : NULL;
 }
 
 /* most drivers won't need to care about device refcounting */
@@ -117,12 +113,38 @@ static inline void spi_set_ctldata(struct spi_device *spi, void *state)
 struct spi_message;
 
 
+
+struct spi_driver {
+        int                     (*probe)(struct spi_device *spi);
+        int                     (*remove)(struct spi_device *spi);
+        void                    (*shutdown)(struct spi_device *spi);
+        int                     (*suspend)(struct spi_device *spi, pm_message_t mesg);
+        int                     (*resume)(struct spi_device *spi);
+        struct device_driver    driver;
+};
+
+static inline struct spi_driver *to_spi_driver(struct device_driver *drv)
+{
+        return drv ? container_of(drv, struct spi_driver, driver) : NULL;
+}
+
+extern int spi_register_driver(struct spi_driver *sdrv);
+
+static inline void spi_unregister_driver(struct spi_driver *sdrv)
+{
+        if (!sdrv)
+                return;
+        driver_unregister(&sdrv->driver);
+}
+
+
+
 /**
  * struct spi_master - interface to SPI master controller
  * @cdev: class interface to this driver
  * @bus_num: board-specific (and often SOC-specific) identifier for a
  *      given SPI controller.
- * @num_chipselects: chipselects are used to distinguish individual
+ * @num_chipselect: chipselects are used to distinguish individual
  *      SPI slaves, and are numbered from zero to num_chipselects.
  *      each slave has a chipselect signal, but it's common that not
  *      every chipselect is connected to a slave.
@@ -275,7 +297,8 @@ struct spi_transfer {
  *      addresses for each transfer buffer
  * @complete: called to report transaction completions
  * @context: the argument to complete() when it's called
- * @actual_length: how many bytes were transferd
+ * @actual_length: the total number of bytes that were transferred in all
+ *      successful segments
  * @status: zero for success, else negative errno
  * @queue: for use by whichever driver currently owns the message
  * @state: for use by whichever driver currently owns the message
@@ -295,7 +318,7 @@ struct spi_message {
          *
          * Some controller drivers (message-at-a-time queue processing)
          * could provide that as their default scheduling algorithm.  But
-         * others (with multi-message pipelines) would need a flag to
+         * others (with multi-message pipelines) could need a flag to
          * tell them about such special cases.
          */
 
@@ -346,6 +369,13 @@ spi_setup(struct spi_device *spi)
  * FIFO order, messages may go to different devices in other orders.
  * Some device might be higher priority, or have various "hard" access
  * time requirements, for example.
+ *
+ * On detection of any fault during the transfer, processing of
+ * the entire message is aborted, and the device is deselected.
+ * Until returning from the associated message completion callback,
+ * no other spi_message queued to that device will be processed.
+ * (This rule applies equally to all the synchronous transfer calls,
+ * which are wrappers around this core asynchronous primitive.)
  */
 static inline int
 spi_async(struct spi_device *spi, struct spi_message *message)
@@ -484,12 +514,12 @@ struct spi_board_info {
          * "modalias" is normally the driver name.
          *
          * platform_data goes to spi_device.dev.platform_data,
-         * controller_data goes to spi_device.platform_data,
+         * controller_data goes to spi_device.controller_data,
          * irq is copied too
          */
         char            modalias[KOBJ_NAME_LEN];
         const void      *platform_data;
-        const void      *controller_data;
+        void            *controller_data;
         int             irq;
 
         /* slower signaling on noisy or low voltage boards */
@@ -525,9 +555,8 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
 
 
 /* If you're hotplugging an adapter with devices (parport, usb, etc)
- * use spi_new_device() to describe each device.  You can also call
- * spi_unregister_device() to get start making that device vanish,
- * but normally that would be handled by spi_unregister_master().
+ * use spi_new_device() to describe each device.  You would then call
+ * spi_unregister_device() to start making that device vanish.
  */
 extern struct spi_device *
 spi_new_device(struct spi_master *, struct spi_board_info *);