1 files changed, 150 insertions, 0 deletions

diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
new file mode 100644
index 000000000000..61ae1306db23
--- /dev/null
+++ b/include/linux/spi/mxs-spi.h
@@ -0,0 +1,150 @@
+/*
+ * include/linux/spi/mxs-spi.h
+ *
+ * Freescale i.MX233/i.MX28 SPI controller register definition
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __LINUX_SPI_MXS_SPI_H__
+#define __LINUX_SPI_MXS_SPI_H__
+
+#include <linux/fsl/mxs-dma.h>
+
+#define ssp_is_old(host)        ((host)->devid == IMX23_SSP)
+
+/* SSP registers */
+#define HW_SSP_CTRL0                            0x000
+#define  BM_SSP_CTRL0_RUN                       (1 << 29)
+#define  BM_SSP_CTRL0_SDIO_IRQ_CHECK            (1 << 28)
+#define  BM_SSP_CTRL0_LOCK_CS                   (1 << 27)
+#define  BM_SSP_CTRL0_IGNORE_CRC                (1 << 26)
+#define  BM_SSP_CTRL0_READ                      (1 << 25)
+#define  BM_SSP_CTRL0_DATA_XFER                 (1 << 24)
+#define  BP_SSP_CTRL0_BUS_WIDTH                 22
+#define  BM_SSP_CTRL0_BUS_WIDTH                 (0x3 << 22)
+#define  BM_SSP_CTRL0_WAIT_FOR_IRQ              (1 << 21)
+#define  BM_SSP_CTRL0_WAIT_FOR_CMD              (1 << 20)
+#define  BM_SSP_CTRL0_LONG_RESP                 (1 << 19)
+#define  BM_SSP_CTRL0_GET_RESP                  (1 << 17)
+#define  BM_SSP_CTRL0_ENABLE                    (1 << 16)
+#define  BP_SSP_CTRL0_XFER_COUNT                0
+#define  BM_SSP_CTRL0_XFER_COUNT                0xffff
+#define HW_SSP_CMD0                             0x010
+#define  BM_SSP_CMD0_DBL_DATA_RATE_EN           (1 << 25)
+#define  BM_SSP_CMD0_SLOW_CLKING_EN             (1 << 22)
+#define  BM_SSP_CMD0_CONT_CLKING_EN             (1 << 21)
+#define  BM_SSP_CMD0_APPEND_8CYC                (1 << 20)
+#define  BP_SSP_CMD0_BLOCK_SIZE                 16
+#define  BM_SSP_CMD0_BLOCK_SIZE                 (0xf << 16)
+#define  BP_SSP_CMD0_BLOCK_COUNT                8
+#define  BM_SSP_CMD0_BLOCK_COUNT                (0xff << 8)
+#define  BP_SSP_CMD0_CMD                        0
+#define  BM_SSP_CMD0_CMD                        0xff
+#define HW_SSP_CMD1                             0x020
+#define HW_SSP_XFER_SIZE                        0x030
+#define HW_SSP_BLOCK_SIZE                       0x040
+#define  BP_SSP_BLOCK_SIZE_BLOCK_COUNT          4
+#define  BM_SSP_BLOCK_SIZE_BLOCK_COUNT          (0xffffff << 4)
+#define  BP_SSP_BLOCK_SIZE_BLOCK_SIZE           0
+#define  BM_SSP_BLOCK_SIZE_BLOCK_SIZE           0xf
+#define HW_SSP_TIMING(h)                        (ssp_is_old(h) ? 0x050 : 0x070)
+#define  BP_SSP_TIMING_TIMEOUT                  16
+#define  BM_SSP_TIMING_TIMEOUT                  (0xffff << 16)
+#define  BP_SSP_TIMING_CLOCK_DIVIDE             8
+#define  BM_SSP_TIMING_CLOCK_DIVIDE             (0xff << 8)
+#define  BF_SSP_TIMING_CLOCK_DIVIDE(v)          \
+                        (((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
+#define  BP_SSP_TIMING_CLOCK_RATE               0
+#define  BM_SSP_TIMING_CLOCK_RATE               0xff
+#define BF_SSP_TIMING_CLOCK_RATE(v)             \
+                        (((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
+#define HW_SSP_CTRL1(h)                         (ssp_is_old(h) ? 0x060 : 0x080)
+#define  BM_SSP_CTRL1_SDIO_IRQ                  (1 << 31)
+#define  BM_SSP_CTRL1_SDIO_IRQ_EN               (1 << 30)
+#define  BM_SSP_CTRL1_RESP_ERR_IRQ              (1 << 29)
+#define  BM_SSP_CTRL1_RESP_ERR_IRQ_EN           (1 << 28)
+#define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ          (1 << 27)
+#define  BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN       (1 << 26)
+#define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ          (1 << 25)
+#define  BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN       (1 << 24)
+#define  BM_SSP_CTRL1_DATA_CRC_IRQ              (1 << 23)
+#define  BM_SSP_CTRL1_DATA_CRC_IRQ_EN           (1 << 22)
+#define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ         (1 << 21)
+#define  BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN      (1 << 20)
+#define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ          (1 << 17)
+#define  BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN       (1 << 16)
+#define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ          (1 << 15)
+#define  BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN       (1 << 14)
+#define  BM_SSP_CTRL1_DMA_ENABLE                (1 << 13)
+#define  BM_SSP_CTRL1_PHASE                     (1 << 10)
+#define  BM_SSP_CTRL1_POLARITY                  (1 << 9)
+#define  BP_SSP_CTRL1_WORD_LENGTH               4
+#define  BM_SSP_CTRL1_WORD_LENGTH               (0xf << 4)
+#define  BF_SSP_CTRL1_WORD_LENGTH(v)            \
+                        (((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
+#define  BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS    0x3
+#define  BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS   0x7
+#define  BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS 0xF
+#define  BP_SSP_CTRL1_SSP_MODE                  0
+#define  BM_SSP_CTRL1_SSP_MODE                  0xf
+#define  BF_SSP_CTRL1_SSP_MODE(v)               \
+                        (((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
+#define  BV_SSP_CTRL1_SSP_MODE__SPI             0x0
+#define  BV_SSP_CTRL1_SSP_MODE__SSI             0x1
+#define  BV_SSP_CTRL1_SSP_MODE__SD_MMC          0x3
+#define  BV_SSP_CTRL1_SSP_MODE__MS              0x4
+
+#define HW_SSP_DATA(h)                          (ssp_is_old(h) ? 0x070 : 0x090)
+
+#define HW_SSP_SDRESP0(h)                       (ssp_is_old(h) ? 0x080 : 0x0a0)
+#define HW_SSP_SDRESP1(h)                       (ssp_is_old(h) ? 0x090 : 0x0b0)
+#define HW_SSP_SDRESP2(h)                       (ssp_is_old(h) ? 0x0a0 : 0x0c0)
+#define HW_SSP_SDRESP3(h)                       (ssp_is_old(h) ? 0x0b0 : 0x0d0)
+#define HW_SSP_STATUS(h)                        (ssp_is_old(h) ? 0x0c0 : 0x100)
+#define  BM_SSP_STATUS_CARD_DETECT              (1 << 28)
+#define  BM_SSP_STATUS_SDIO_IRQ                 (1 << 17)
+#define  BM_SSP_STATUS_FIFO_EMPTY               (1 << 5)
+
+#define BF_SSP(value, field)    (((value) << BP_SSP_##field) & BM_SSP_##field)
+
+#define SSP_PIO_NUM     3
+
+enum mxs_ssp_id {
+        IMX23_SSP,
+        IMX28_SSP,
+};
+
+struct mxs_ssp {
+        struct device                   *dev;
+        void __iomem                    *base;
+        struct clk                      *clk;
+        unsigned int                    clk_rate;
+        enum mxs_ssp_id                 devid;
+
+        int                             dma_channel;
+        struct dma_chan                 *dmach;
+        struct mxs_dma_data             dma_data;
+        unsigned int                    dma_dir;
+        enum dma_transfer_direction     slave_dirn;
+        u32                             ssp_pio_words[SSP_PIO_NUM];
+};
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
+
+#endif  /* __LINUX_SPI_MXS_SPI_H__ */