1 files changed, 1 insertions, 168 deletions

diff --git a/include/linux/scc.h b/include/linux/scc.h
index 3495bd953cc6..c5a004962679 100644
--- a/include/linux/scc.h
+++ b/include/linux/scc.h
@@ -1,175 +1,9 @@
 /* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
 #ifndef _SCC_H
 #define _SCC_H
 
+#include <uapi/linux/scc.h>
 
-/* selection of hardware types */
-
-#define PA0HZP          0x00    /* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE           0x01    /* hardware type for EAGLE card */
-#define PC100           0x02    /* hardware type for PC100 card */
-#define PRIMUS          0x04    /* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI            0x08    /* hardware type for DRSI PC*Packet card */
-#define BAYCOM          0x10    /* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
-        SIOCSCCRESERVED = SIOCDEVPRIVATE,
-        SIOCSCCCFG,
-        SIOCSCCINI,
-        SIOCSCCCHANINI,
-        SIOCSCCSMEM,
-        SIOCSCCGKISS,
-        SIOCSCCSKISS,
-        SIOCSCCGSTAT,
-        SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
-        PARAM_DATA,
-        PARAM_TXDELAY,
-        PARAM_PERSIST,
-        PARAM_SLOTTIME,
-        PARAM_TXTAIL,
-        PARAM_FULLDUP,
-        PARAM_SOFTDCD,          /* was: PARAM_HW */
-        PARAM_MUTE,             /* ??? */
-        PARAM_DTR,
-        PARAM_RTS,
-        PARAM_SPEED,
-        PARAM_ENDDELAY,         /* ??? */
-        PARAM_GROUP,
-        PARAM_IDLE,
-        PARAM_MIN,
-        PARAM_MAXKEY,
-        PARAM_WAIT,
-        PARAM_MAXDEFER,
-        PARAM_TX,
-        PARAM_HWEVENT = 31,
-        PARAM_RETURN = 255      /* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
-        KISS_DUPLEX_HALF,       /* normal CSMA operation */
-        KISS_DUPLEX_FULL,       /* fullduplex, key down trx after transmission */
-        KISS_DUPLEX_LINK,       /* fullduplex, key down trx after 'idletime' sec */
-        KISS_DUPLEX_OPTIMA      /* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF       65535U  /* to switch off timers */
-#define NO_SUCH_PARAM   65534U  /* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
-        HWEV_DCD_ON,
-        HWEV_DCD_OFF,
-        HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP         0100    /* if set, only tx when all channels clear */
-#define TXGROUP         0200    /* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
-        CLK_DPLL,       /* normal halfduplex operation */
-        CLK_EXTERNAL,   /* external clocking (G3RUH/DF9IC modems) */
-        CLK_DIVIDER,    /* Rx = DPLL, Tx = divider (fullduplex with */
-                        /* modems without clock regeneration */
-        CLK_BRG         /* experimental fullduplex mode with DPLL/BRG for */
-                        /* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
-        TXS_IDLE,       /* Transmitter off, no data pending */
-        TXS_BUSY,       /* waiting for permission to send / tailtime */
-        TXS_ACTIVE,     /* Transmitter on, sending data */
-        TXS_NEWFRAME,   /* reset CRC and send (next) frame */
-        TXS_IDLE2,      /* Transmitter on, no data pending */
-        TXS_WAIT,       /* Waiting for Mintime to expire */
-        TXS_TIMEOUT     /* We had a transmission timeout */
-};
-
-typedef unsigned long io_port;  /* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
-        long rxints;            /* Receiver interrupts */
-        long txints;            /* Transmitter interrupts */
-        long exints;            /* External/status interrupts */
-        long spints;            /* Special receiver interrupts */
-
-        long txframes;          /* Packets sent */
-        long rxframes;          /* Number of Frames Actually Received */
-        long rxerrs;            /* CRC Errors */
-        long txerrs;            /* KISS errors */
-        
-        unsigned int nospace;   /* "Out of buffers" */
-        unsigned int rx_over;   /* Receiver Overruns */
-        unsigned int tx_under;  /* Transmitter Underruns */
-
-        unsigned int tx_state;  /* Transmitter state */
-        int tx_queued;          /* tx frames enqueued */
-
-        unsigned int maxqueue;  /* allocated tx_buffers */
-        unsigned int bufsize;   /* used buffersize */
-};
-
-struct scc_modem {
-        long speed;             /* Line speed, bps */
-        char clocksrc;          /* 0 = DPLL, 1 = external, 2 = divider */
-        char nrz;               /* NRZ instead of NRZI */       
-};
-
-struct scc_kiss_cmd {
-        int      command;       /* one of the KISS-Commands defined above */
-        unsigned param;         /* KISS-Param */
-};
-
-struct scc_hw_config {
-        io_port data_a;         /* data port channel A */
-        io_port ctrl_a;         /* control port channel A */
-        io_port data_b;         /* data port channel B */
-        io_port ctrl_b;         /* control port channel B */
-        io_port vector_latch;   /* INTACK-Latch (#) */
-        io_port special;        /* special function port */
-
-        int     irq;            /* irq */
-        long    clock;          /* clock */
-        char    option;         /* command for function port */
-
-        char brand;             /* hardware type */
-        char escc;              /* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
-        unsigned int dummy;
-        unsigned int bufsize;
-};
-
-struct scc_calibrate {
-        unsigned int time;
-        unsigned char pattern;
-};
-
-#ifdef __KERNEL__
 
 enum {TX_OFF, TX_ON};   /* command for scc_key_trx() */
 
@@ -248,5 +82,4 @@ struct scc_channel {
         spinlock_t      lock;           /* Channel guard lock */
 };
 
-#endif /* defined(__KERNEL__) */
 #endif /* defined(_SCC_H) */