9 files changed, 180 insertions, 43 deletions

diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h
index ada401244e0b..1d36ca874cc8 100644
--- a/include/linux/platform_data/dwc3-omap.h
+++ b/include/linux/platform_data/dwc3-omap.h
@@ -41,7 +41,3 @@ enum dwc3_omap_utmi_mode {
         DWC3_OMAP_UTMI_MODE_HW,
         DWC3_OMAP_UTMI_MODE_SW,
 };
-
-struct dwc3_omap_data {
-        enum dwc3_omap_utmi_mode        utmi_mode;
-};
diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h
index 03378ca84061..5c19a2a647c4 100644
--- a/include/linux/platform_data/emif_plat.h
+++ b/include/linux/platform_data/emif_plat.h
@@ -40,6 +40,7 @@
 /* Custom config requests */
 #define EMIF_CUSTOM_CONFIG_LPMODE                       0x00000001
 #define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL     0x00000002
+#define EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART           0x00000004
 
 #ifndef __ASSEMBLY__
 /**
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index 944b01dd103e..98b7925f1a2d 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -34,8 +34,6 @@ struct mv_usb_addon_irq {
 };
 
 struct mv_usb_platform_data {
-        unsigned int            clknum;
-        char                    **clkname;
         struct mv_usb_addon_irq *id;    /* Only valid for OTG. ID pin change*/
         struct mv_usb_addon_irq *vbus;  /* valid for OTG/UDC. VBUS change*/
 
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
index 88734e871e3a..c7285b575462 100644
--- a/include/linux/platform_data/ntc_thermistor.h
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -21,6 +21,8 @@
 #ifndef _LINUX_NTC_H
 #define _LINUX_NTC_H
 
+struct iio_channel;
+
 enum ntc_thermistor_type {
         TYPE_NCPXXWB473,
         TYPE_NCPXXWL333,
@@ -39,13 +41,17 @@ struct ntc_thermistor_platform_data {
          * described at Documentation/hwmon/ntc_thermistor
          *
          * pullup/down_ohm: 0 for infinite / not-connected
+         *
+         * chan: iio_channel pointer to communicate with the ADC which the
+         * thermistor is using for conversion of the analog values.
          */
-        int (*read_uV)(void);
-        unsigned int pullup_uV;
+        int (*read_uv)(struct ntc_thermistor_platform_data *);
+        unsigned int pullup_uv;
 
         unsigned int pullup_ohm;
         unsigned int pulldown_ohm;
         enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
+        struct iio_channel *chan;
 
         int (*read_ohm)(void);
 };
diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h
index 215574d1e81d..bdc510d03245 100644
--- a/include/linux/platform_data/serial-sccnxp.h
+++ b/include/linux/platform_data/serial-sccnxp.h
@@ -86,10 +86,6 @@ struct sccnxp_pdata {
         const u32               mctrl_cfg[SCCNXP_MAX_UARTS];
         /* Timer value for polling mode (usecs) */
         const unsigned int      poll_time_us;
-        /* Called during startup */
-        void (*init)(void);
-        /* Called before finish */
-        void (*exit)(void);
 };
 
 #endif
diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h
new file mode 100644
index 000000000000..92dabcaf6499
--- /dev/null
+++ b/include/linux/platform_data/si5351.h
@@ -0,0 +1,114 @@
+/*
+ * Si5351A/B/C programmable clock generator platform_data.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_SI5351_H__
+#define __LINUX_PLATFORM_DATA_SI5351_H__
+
+struct clk;
+
+/**
+ * enum si5351_variant - SiLabs Si5351 chip variant
+ * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input)
+ * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input)
+ * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input)
+ * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input)
+ */
+enum si5351_variant {
+        SI5351_VARIANT_A = 1,
+        SI5351_VARIANT_A3 = 2,
+        SI5351_VARIANT_B = 3,
+        SI5351_VARIANT_C = 4,
+};
+
+/**
+ * enum si5351_pll_src - Si5351 pll clock source
+ * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config
+ * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input
+ * @SI5351_PLL_SRC_CLKIN: pll source clock is CLKIN input (Si5351C only)
+ */
+enum si5351_pll_src {
+        SI5351_PLL_SRC_DEFAULT = 0,
+        SI5351_PLL_SRC_XTAL = 1,
+        SI5351_PLL_SRC_CLKIN = 2,
+};
+
+/**
+ * enum si5351_multisynth_src - Si5351 multisynth clock source
+ * @SI5351_MULTISYNTH_SRC_DEFAULT: default, do not change eeprom config
+ * @SI5351_MULTISYNTH_SRC_VCO0: multisynth source clock is VCO0
+ * @SI5351_MULTISYNTH_SRC_VCO1: multisynth source clock is VCO1/VXCO
+ */
+enum si5351_multisynth_src {
+        SI5351_MULTISYNTH_SRC_DEFAULT = 0,
+        SI5351_MULTISYNTH_SRC_VCO0 = 1,
+        SI5351_MULTISYNTH_SRC_VCO1 = 2,
+};
+
+/**
+ * enum si5351_clkout_src - Si5351 clock output clock source
+ * @SI5351_CLKOUT_SRC_DEFAULT: default, do not change eeprom config
+ * @SI5351_CLKOUT_SRC_MSYNTH_N: clkout N source clock is multisynth N
+ * @SI5351_CLKOUT_SRC_MSYNTH_0_4: clkout N source clock is multisynth 0 (N<4)
+ *                                or 4 (N>=4)
+ * @SI5351_CLKOUT_SRC_XTAL: clkout N source clock is XTAL
+ * @SI5351_CLKOUT_SRC_CLKIN: clkout N source clock is CLKIN (Si5351C only)
+ */
+enum si5351_clkout_src {
+        SI5351_CLKOUT_SRC_DEFAULT = 0,
+        SI5351_CLKOUT_SRC_MSYNTH_N = 1,
+        SI5351_CLKOUT_SRC_MSYNTH_0_4 = 2,
+        SI5351_CLKOUT_SRC_XTAL = 3,
+        SI5351_CLKOUT_SRC_CLKIN = 4,
+};
+
+/**
+ * enum si5351_drive_strength - Si5351 clock output drive strength
+ * @SI5351_DRIVE_DEFAULT: default, do not change eeprom config
+ * @SI5351_DRIVE_2MA: 2mA clock output drive strength
+ * @SI5351_DRIVE_4MA: 4mA clock output drive strength
+ * @SI5351_DRIVE_6MA: 6mA clock output drive strength
+ * @SI5351_DRIVE_8MA: 8mA clock output drive strength
+ */
+enum si5351_drive_strength {
+        SI5351_DRIVE_DEFAULT = 0,
+        SI5351_DRIVE_2MA = 2,
+        SI5351_DRIVE_4MA = 4,
+        SI5351_DRIVE_6MA = 6,
+        SI5351_DRIVE_8MA = 8,
+};
+
+/**
+ * struct si5351_clkout_config - Si5351 clock output configuration
+ * @clkout: clkout number
+ * @multisynth_src: multisynth source clock
+ * @clkout_src: clkout source clock
+ * @pll_master: if true, clkout can also change pll rate
+ * @drive: output drive strength
+ * @rate: initial clkout rate, or default if 0
+ */
+struct si5351_clkout_config {
+        enum si5351_multisynth_src multisynth_src;
+        enum si5351_clkout_src clkout_src;
+        enum si5351_drive_strength drive;
+        bool pll_master;
+        unsigned long rate;
+};
+
+/**
+ * struct si5351_platform_data - Platform data for the Si5351 clock driver
+ * @variant: Si5351 chip variant
+ * @clk_xtal: xtal input clock
+ * @clk_clkin: clkin input clock
+ * @pll_src: array of pll source clock setting
+ * @clkout: array of clkout configuration
+ */
+struct si5351_platform_data {
+        enum si5351_variant variant;
+        struct clk *clk_xtal;
+        struct clk *clk_clkin;
+        enum si5351_pll_src pll_src[2];
+        struct si5351_clkout_config clkout[8];
+};
+
+#endif
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index ceba18d23a5a..8447f634c7f5 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -11,6 +11,8 @@
 #ifndef __S3C64XX_PLAT_SPI_H
 #define __S3C64XX_PLAT_SPI_H
 
+#include <linux/dmaengine.h>
+
 struct platform_device;
 
 /**
@@ -38,6 +40,7 @@ struct s3c64xx_spi_info {
         int src_clk_nr;
         int num_cs;
         int (*cfg_gpio)(void);
+        dma_filter_fn filter;
 };
 
 /**
diff --git a/include/linux/platform_data/video-vt8500lcdfb.h b/include/linux/platform_data/video-vt8500lcdfb.h
deleted file mode 100644
index 7f399c370fe0..000000000000
--- a/include/linux/platform_data/video-vt8500lcdfb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  VT8500/WM8505 Frame Buffer platform data definitions
- *
- *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
-        struct fb_videomode     mode;
-        u32                     xres_virtual;
-        u32                     yres_virtual;
-        u32                     bpp;
-        unsigned long           video_mem_phys;
-        void                    *video_mem_virt;
-        unsigned long           video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
diff --git a/include/linux/platform_data/video_s3c.h b/include/linux/platform_data/video_s3c.h
new file mode 100644
index 000000000000..48883995f47f
--- /dev/null
+++ b/include/linux/platform_data/video_s3c.h
@@ -0,0 +1,54 @@
+#ifndef __PLATFORM_DATA_VIDEO_S3C
+#define __PLATFORM_DATA_VIDEO_S3C
+
+/* S3C_FB_MAX_WIN
+ * Set to the maximum number of windows that any of the supported hardware
+ * can use. Since the platform data uses this for an array size, having it
+ * set to the maximum of any version of the hardware can do is safe.
+ */
+#define S3C_FB_MAX_WIN  (5)
+
+/**
+ * struct s3c_fb_pd_win - per window setup data
+ * @xres     : The window X size.
+ * @yres     : The window Y size.
+ * @virtual_x: The virtual X size.
+ * @virtual_y: The virtual Y size.
+ */
+struct s3c_fb_pd_win {
+        unsigned short          default_bpp;
+        unsigned short          max_bpp;
+        unsigned short          xres;
+        unsigned short          yres;
+        unsigned short          virtual_x;
+        unsigned short          virtual_y;
+};
+
+/**
+ * struct s3c_fb_platdata -  S3C driver platform specific information
+ * @setup_gpio: Setup the external GPIO pins to the right state to transfer
+ *              the data from the display system to the connected display
+ *              device.
+ * @vidcon0: The base vidcon0 values to control the panel data format.
+ * @vidcon1: The base vidcon1 values to control the panel data output.
+ * @vtiming: Video timing when connected to a RGB type panel.
+ * @win: The setup data for each hardware window, or NULL for unused.
+ * @display_mode: The LCD output display mode.
+ *
+ * The platform data supplies the video driver with all the information
+ * it requires to work with the display(s) attached to the machine. It
+ * controls the initial mode, the number of display windows (0 is always
+ * the base framebuffer) that are initialised etc.
+ *
+ */
+struct s3c_fb_platdata {
+        void    (*setup_gpio)(void);
+
+        struct s3c_fb_pd_win    *win[S3C_FB_MAX_WIN];
+        struct fb_videomode     *vtiming;
+
+        u32                      vidcon0;
+        u32                      vidcon1;
+};
+
+#endif