diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/dma-hsu.h | 25 | ||||
| -rw-r--r-- | include/linux/platform_data/hsmmc-omap.h | 6 | ||||
| -rw-r--r-- | include/linux/platform_data/i2c-davinci.h | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/mmc-msm_sdcc.h | 27 | ||||
| -rw-r--r-- | include/linux/platform_data/msm_serial_hs.h | 49 | ||||
| -rw-r--r-- | include/linux/platform_data/nxp-nci.h | 27 | ||||
| -rw-r--r-- | include/linux/platform_data/serial-imx.h | 5 | ||||
| -rw-r--r-- | include/linux/platform_data/sky81452-backlight.h | 46 | ||||
| -rw-r--r-- | include/linux/platform_data/st33zp24.h (renamed from include/linux/platform_data/tpm_stm_st33.h) | 21 |
9 files changed, 106 insertions, 101 deletions
diff --git a/include/linux/platform_data/dma-hsu.h b/include/linux/platform_data/dma-hsu.h new file mode 100644 index 000000000000..8a1f6a4920b2 --- /dev/null +++ b/include/linux/platform_data/dma-hsu.h | |||
| @@ -0,0 +1,25 @@ | |||
| 1 | /* | ||
| 2 | * Driver for the High Speed UART DMA | ||
| 3 | * | ||
| 4 | * Copyright (C) 2015 Intel Corporation | ||
| 5 | * | ||
| 6 | * This program is free software; you can redistribute it and/or modify | ||
| 7 | * it under the terms of the GNU General Public License version 2 as | ||
| 8 | * published by the Free Software Foundation. | ||
| 9 | */ | ||
| 10 | |||
| 11 | #ifndef _PLATFORM_DATA_DMA_HSU_H | ||
| 12 | #define _PLATFORM_DATA_DMA_HSU_H | ||
| 13 | |||
| 14 | #include <linux/device.h> | ||
| 15 | |||
| 16 | struct hsu_dma_slave { | ||
| 17 | struct device *dma_dev; | ||
| 18 | int chan_id; | ||
| 19 | }; | ||
| 20 | |||
| 21 | struct hsu_dma_platform_data { | ||
| 22 | unsigned short nr_channels; | ||
| 23 | }; | ||
| 24 | |||
| 25 | #endif /* _PLATFORM_DATA_DMA_HSU_H */ | ||
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h index 67bbcf0785f6..8e981be2e2c2 100644 --- a/include/linux/platform_data/hsmmc-omap.h +++ b/include/linux/platform_data/hsmmc-omap.h | |||
| @@ -55,9 +55,6 @@ struct omap_hsmmc_platform_data { | |||
| 55 | u32 caps; /* Used for the MMC driver on 2430 and later */ | 55 | u32 caps; /* Used for the MMC driver on 2430 and later */ |
| 56 | u32 pm_caps; /* PM capabilities of the mmc */ | 56 | u32 pm_caps; /* PM capabilities of the mmc */ |
| 57 | 57 | ||
| 58 | /* switch pin can be for card detect (default) or card cover */ | ||
| 59 | unsigned cover:1; | ||
| 60 | |||
| 61 | /* use the internal clock */ | 58 | /* use the internal clock */ |
| 62 | unsigned internal_clock:1; | 59 | unsigned internal_clock:1; |
| 63 | 60 | ||
| @@ -73,7 +70,8 @@ struct omap_hsmmc_platform_data { | |||
| 73 | #define HSMMC_HAS_HSPE_SUPPORT (1 << 2) | 70 | #define HSMMC_HAS_HSPE_SUPPORT (1 << 2) |
| 74 | unsigned features; | 71 | unsigned features; |
| 75 | 72 | ||
| 76 | int switch_pin; /* gpio (card detect) */ | 73 | int gpio_cd; /* gpio (card detect) */ |
| 74 | int gpio_cod; /* gpio (cover detect) */ | ||
| 77 | int gpio_wp; /* gpio (write protect) */ | 75 | int gpio_wp; /* gpio (write protect) */ |
| 78 | 76 | ||
| 79 | int (*set_power)(struct device *dev, int power_on, int vdd); | 77 | int (*set_power)(struct device *dev, int power_on, int vdd); |
diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h index 2312d197dfb7..89fd34727a24 100644 --- a/include/linux/platform_data/i2c-davinci.h +++ b/include/linux/platform_data/i2c-davinci.h | |||
| @@ -18,6 +18,7 @@ struct davinci_i2c_platform_data { | |||
| 18 | unsigned int bus_delay; /* post-transaction delay (usec) */ | 18 | unsigned int bus_delay; /* post-transaction delay (usec) */ |
| 19 | unsigned int sda_pin; /* GPIO pin ID to use for SDA */ | 19 | unsigned int sda_pin; /* GPIO pin ID to use for SDA */ |
| 20 | unsigned int scl_pin; /* GPIO pin ID to use for SCL */ | 20 | unsigned int scl_pin; /* GPIO pin ID to use for SCL */ |
| 21 | bool has_pfunc; /*chip has a ICPFUNC register */ | ||
| 21 | }; | 22 | }; |
| 22 | 23 | ||
| 23 | /* for board setup code */ | 24 | /* for board setup code */ |
diff --git a/include/linux/platform_data/mmc-msm_sdcc.h b/include/linux/platform_data/mmc-msm_sdcc.h deleted file mode 100644 index 55aa873c9396..000000000000 --- a/include/linux/platform_data/mmc-msm_sdcc.h +++ /dev/null | |||
| @@ -1,27 +0,0 @@ | |||
| 1 | #ifndef __MMC_MSM_SDCC_H | ||
| 2 | #define __MMC_MSM_SDCC_H | ||
| 3 | |||
| 4 | #include <linux/mmc/host.h> | ||
| 5 | #include <linux/mmc/card.h> | ||
| 6 | #include <linux/mmc/sdio_func.h> | ||
| 7 | |||
| 8 | struct msm_mmc_gpio { | ||
| 9 | unsigned no; | ||
| 10 | const char *name; | ||
| 11 | }; | ||
| 12 | |||
| 13 | struct msm_mmc_gpio_data { | ||
| 14 | struct msm_mmc_gpio *gpio; | ||
| 15 | u8 size; | ||
| 16 | }; | ||
| 17 | |||
| 18 | struct msm_mmc_platform_data { | ||
| 19 | unsigned int ocr_mask; /* available voltages */ | ||
| 20 | u32 (*translate_vdd)(struct device *, unsigned int); | ||
| 21 | unsigned int (*status)(struct device *); | ||
| 22 | int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); | ||
| 23 | struct msm_mmc_gpio_data *gpio_data; | ||
| 24 | void (*init_card)(struct mmc_card *card); | ||
| 25 | }; | ||
| 26 | |||
| 27 | #endif | ||
diff --git a/include/linux/platform_data/msm_serial_hs.h b/include/linux/platform_data/msm_serial_hs.h deleted file mode 100644 index 98a2046f8b31..000000000000 --- a/include/linux/platform_data/msm_serial_hs.h +++ /dev/null | |||
| @@ -1,49 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * Copyright (C) 2008 Google, Inc. | ||
| 3 | * Author: Nick Pelly <npelly@google.com> | ||
| 4 | * | ||
| 5 | * This software is licensed under the terms of the GNU General Public | ||
| 6 | * License version 2, as published by the Free Software Foundation, and | ||
| 7 | * may be copied, distributed, and modified under those terms. | ||
| 8 | * | ||
| 9 | * This program is distributed in the hope that it will be useful, | ||
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
| 12 | * GNU General Public License for more details. | ||
| 13 | */ | ||
| 14 | |||
| 15 | #ifndef __ASM_ARCH_MSM_SERIAL_HS_H | ||
| 16 | #define __ASM_ARCH_MSM_SERIAL_HS_H | ||
| 17 | |||
| 18 | #include <linux/serial_core.h> | ||
| 19 | |||
| 20 | /* API to request the uart clock off or on for low power management | ||
| 21 | * Clients should call request_clock_off() when no uart data is expected, | ||
| 22 | * and must call request_clock_on() before any further uart data can be | ||
| 23 | * received. */ | ||
| 24 | extern void msm_hs_request_clock_off(struct uart_port *uport); | ||
| 25 | extern void msm_hs_request_clock_on(struct uart_port *uport); | ||
| 26 | |||
| 27 | /** | ||
| 28 | * struct msm_serial_hs_platform_data | ||
| 29 | * @rx_wakeup_irq: Rx activity irq | ||
| 30 | * @rx_to_inject: extra character to be inserted to Rx tty on wakeup | ||
| 31 | * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character | ||
| 32 | * @exit_lpm_cb: function called before every Tx transaction | ||
| 33 | * | ||
| 34 | * This is an optional structure required for UART Rx GPIO IRQ based | ||
| 35 | * wakeup from low power state. UART wakeup can be triggered by RX activity | ||
| 36 | * (using a wakeup GPIO on the UART RX pin). This should only be used if | ||
| 37 | * there is not a wakeup GPIO on the UART CTS, and the first RX byte is | ||
| 38 | * known (eg., with the Bluetooth Texas Instruments HCILL protocol), | ||
| 39 | * since the first RX byte will always be lost. RTS will be asserted even | ||
| 40 | * while the UART is clocked off in this mode of operation. | ||
| 41 | */ | ||
| 42 | struct msm_serial_hs_platform_data { | ||
| 43 | int rx_wakeup_irq; | ||
| 44 | unsigned char inject_rx_on_wakeup; | ||
| 45 | char rx_to_inject; | ||
| 46 | void (*exit_lpm_cb)(struct uart_port *); | ||
| 47 | }; | ||
| 48 | |||
| 49 | #endif | ||
diff --git a/include/linux/platform_data/nxp-nci.h b/include/linux/platform_data/nxp-nci.h new file mode 100644 index 000000000000..d6ed28679bb2 --- /dev/null +++ b/include/linux/platform_data/nxp-nci.h | |||
| @@ -0,0 +1,27 @@ | |||
| 1 | /* | ||
| 2 | * Generic platform data for the NXP NCI NFC chips. | ||
| 3 | * | ||
| 4 | * Copyright (C) 2014 NXP Semiconductors All rights reserved. | ||
| 5 | * | ||
| 6 | * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> | ||
| 7 | * | ||
| 8 | * This program is free software; you can redistribute it and/or modify it | ||
| 9 | * under the terms and conditions of the GNU General Public License, | ||
| 10 | * version 2, as published by the Free Software Foundation. | ||
| 11 | * | ||
| 12 | * This program is distributed in the hope that it will be useful, | ||
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
| 15 | * GNU General Public License for more details. | ||
| 16 | */ | ||
| 17 | |||
| 18 | #ifndef _NXP_NCI_H_ | ||
| 19 | #define _NXP_NCI_H_ | ||
| 20 | |||
| 21 | struct nxp_nci_nfc_platform_data { | ||
| 22 | unsigned int gpio_en; | ||
| 23 | unsigned int gpio_fw; | ||
| 24 | unsigned int irq; | ||
| 25 | }; | ||
| 26 | |||
| 27 | #endif /* _NXP_NCI_H_ */ | ||
diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h index 3cc2e3c40914..a938eba2f18e 100644 --- a/include/linux/platform_data/serial-imx.h +++ b/include/linux/platform_data/serial-imx.h | |||
| @@ -20,14 +20,9 @@ | |||
| 20 | #define ASMARM_ARCH_UART_H | 20 | #define ASMARM_ARCH_UART_H |
| 21 | 21 | ||
| 22 | #define IMXUART_HAVE_RTSCTS (1<<0) | 22 | #define IMXUART_HAVE_RTSCTS (1<<0) |
| 23 | #define IMXUART_IRDA (1<<1) | ||
| 24 | 23 | ||
| 25 | struct imxuart_platform_data { | 24 | struct imxuart_platform_data { |
| 26 | unsigned int flags; | 25 | unsigned int flags; |
| 27 | void (*irda_enable)(int enable); | ||
| 28 | unsigned int irda_inv_rx:1; | ||
| 29 | unsigned int irda_inv_tx:1; | ||
| 30 | unsigned short transceiver_delay; | ||
| 31 | }; | 26 | }; |
| 32 | 27 | ||
| 33 | #endif | 28 | #endif |
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h new file mode 100644 index 000000000000..1231e9bb00f1 --- /dev/null +++ b/include/linux/platform_data/sky81452-backlight.h | |||
| @@ -0,0 +1,46 @@ | |||
| 1 | /* | ||
| 2 | * sky81452.h SKY81452 backlight driver | ||
| 3 | * | ||
| 4 | * Copyright 2014 Skyworks Solutions Inc. | ||
| 5 | * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> | ||
| 6 | * | ||
| 7 | * This program is free software; you can redistribute it and/or modify it | ||
| 8 | * under the terms of the GNU General Public License version 2 | ||
| 9 | * as published by the Free Software Foundation. | ||
| 10 | * | ||
| 11 | * This program is distributed in the hope that it will be useful, but | ||
| 12 | * WITHOUT ANY WARRANTY; without even the implied warranty of | ||
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | ||
| 14 | * General Public License for more details. | ||
| 15 | * | ||
| 16 | * You should have received a copy of the GNU General Public License along | ||
| 17 | * with this program; if not, see <http://www.gnu.org/licenses/>. | ||
| 18 | */ | ||
| 19 | |||
| 20 | #ifndef _SKY81452_BACKLIGHT_H | ||
| 21 | #define _SKY81452_BACKLIGHT_H | ||
| 22 | |||
| 23 | /** | ||
| 24 | * struct sky81452_platform_data | ||
| 25 | * @name: backlight driver name. | ||
| 26 | If it is not defined, default name is lcd-backlight. | ||
| 27 | * @gpio_enable:GPIO number which control EN pin | ||
| 28 | * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6. | ||
| 29 | * @ignore_pwm: true if DPWMI should be ignored. | ||
| 30 | * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode. | ||
| 31 | * @phase_shift:true is phase shift mode. | ||
| 32 | * @short_detecion_threshold: It should be one of 4, 5, 6 and 7V. | ||
| 33 | * @boost_current_limit: It should be one of 2300, 2750mA. | ||
| 34 | */ | ||
| 35 | struct sky81452_bl_platform_data { | ||
| 36 | const char *name; | ||
| 37 | int gpio_enable; | ||
| 38 | unsigned int enable; | ||
| 39 | bool ignore_pwm; | ||
| 40 | bool dpwm_mode; | ||
| 41 | bool phase_shift; | ||
| 42 | unsigned int short_detection_threshold; | ||
| 43 | unsigned int boost_current_limit; | ||
| 44 | }; | ||
| 45 | |||
| 46 | #endif | ||
diff --git a/include/linux/platform_data/tpm_stm_st33.h b/include/linux/platform_data/st33zp24.h index ff75310c0f47..817dfdb37885 100644 --- a/include/linux/platform_data/tpm_stm_st33.h +++ b/include/linux/platform_data/st33zp24.h | |||
| @@ -1,6 +1,6 @@ | |||
| 1 | /* | 1 | /* |
| 2 | * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 | 2 | * STMicroelectronics TPM Linux driver for TPM 1.2 ST33ZP24 |
| 3 | * Copyright (C) 2009, 2010 STMicroelectronics | 3 | * Copyright (C) 2009 - 2015 STMicroelectronics |
| 4 | * | 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify | 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License as published by | 6 | * it under the terms of the GNU General Public License as published by |
| @@ -14,20 +14,9 @@ | |||
| 14 | * | 14 | * |
| 15 | * You should have received a copy of the GNU General Public License | 15 | * You should have received a copy of the GNU General Public License |
| 16 | * along with this program; if not, see <http://www.gnu.org/licenses/>. | 16 | * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| 17 | * | ||
| 18 | * STMicroelectronics version 1.2.0, Copyright (C) 2010 | ||
| 19 | * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. | ||
| 20 | * This is free software, and you are welcome to redistribute it | ||
| 21 | * under certain conditions. | ||
| 22 | * | ||
| 23 | * @Author: Christophe RICARD tpmsupport@st.com | ||
| 24 | * | ||
| 25 | * @File: stm_st33_tpm.h | ||
| 26 | * | ||
| 27 | * @Date: 09/15/2010 | ||
| 28 | */ | 17 | */ |
| 29 | #ifndef __STM_ST33_TPM_H__ | 18 | #ifndef __ST33ZP24_H__ |
| 30 | #define __STM_ST33_TPM_H__ | 19 | #define __ST33ZP24_H__ |
| 31 | 20 | ||
| 32 | #define TPM_ST33_I2C "st33zp24-i2c" | 21 | #define TPM_ST33_I2C "st33zp24-i2c" |
| 33 | #define TPM_ST33_SPI "st33zp24-spi" | 22 | #define TPM_ST33_SPI "st33zp24-spi" |
| @@ -36,4 +25,4 @@ struct st33zp24_platform_data { | |||
| 36 | int io_lpcpd; | 25 | int io_lpcpd; |
| 37 | }; | 26 | }; |
| 38 | 27 | ||
| 39 | #endif /* __STM_ST33_TPM_H__ */ | 28 | #endif /* __ST33ZP24_H__ */ |
