34 files changed, 165 insertions, 394 deletions

diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index c78d90b28b19..3c73c045f8da 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
  * Defines for Multi-Channel Buffered Serial Port
  *
  * Copyright (C) 2002 RidgeRun, Inc.
@@ -21,8 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
+#ifndef __ASOC_TI_MCBSP_H
+#define __ASOC_TI_MCBSP_H
 
 #include <linux/spinlock.h>
 #include <linux/clk.h>
diff --git a/include/linux/platform_data/asoc-ux500-msp.h b/include/linux/platform_data/asoc-ux500-msp.h
index 9991aea3d577..2f34bb98fe2a 100644
--- a/include/linux/platform_data/asoc-ux500-msp.h
+++ b/include/linux/platform_data/asoc-ux500-msp.h
@@ -10,16 +10,9 @@
 
 #include <linux/platform_data/dma-ste-dma40.h>
 
-enum msp_i2s_id {
-        MSP_I2S_0 = 0,
-        MSP_I2S_1,
-        MSP_I2S_2,
-        MSP_I2S_3,
-};
-
 /* Platform data structure for a MSP I2S-device */
 struct msp_i2s_platform_data {
-        enum msp_i2s_id id;
+        int id;
         struct stedma40_chan_cfg *msp_i2s_dma_rx;
         struct stedma40_chan_cfg *msp_i2s_dma_tx;
 };
diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h
deleted file mode 100644
index 80088973b734..000000000000
--- a/include/linux/platform_data/clocksource-nomadik-mtu.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __PLAT_MTU_H
-#define __PLAT_MTU_H
-
-void nmdk_timer_init(void __iomem *base, int irq);
-void nmdk_clkevt_reset(void);
-void nmdk_clksrc_reset(void);
-
-#endif /* __PLAT_MTU_H */
-
diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h
index 689a856b86f9..5245992b0367 100644
--- a/include/linux/platform_data/davinci_asp.h
+++ b/include/linux/platform_data/davinci_asp.h
@@ -92,6 +92,7 @@ enum {
         MCASP_VERSION_1 = 0,    /* DM646x */
         MCASP_VERSION_2,        /* DA8xx/OMAPL1x */
         MCASP_VERSION_3,        /* TI81xx/AM33xx */
+        MCASP_VERSION_4,        /* DRA7xxx */
 };
 
 enum mcbsp_clk_input_pin {
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 3a3942823c20..eabac4e2fc99 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -43,6 +43,11 @@ struct sdma_script_start_addrs {
         s32 dptc_dvfs_addr;
         s32 utra_addr;
         s32 ram_code_start_addr;
+        /* End of v1 array */
+        s32 mcu_2_ssish_addr;
+        s32 ssish_2_mcu_addr;
+        s32 hdmi_dma_addr;
+        /* End of v2 array */
 };
 
 /**
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
index beac6b8b6a7b..bcbc6c3c14c0 100644
--- a/include/linux/platform_data/dma-imx.h
+++ b/include/linux/platform_data/dma-imx.h
@@ -39,6 +39,7 @@ enum sdma_peripheral_type {
         IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */
         IMX_DMATYPE_ASRC,       /* ASRC */
         IMX_DMATYPE_ESAI,       /* ESAI */
+        IMX_DMATYPE_SSI_DUAL,   /* SSI Dual FIFO */
 };
 
 enum imx_dma_prio {
diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h
index 239e0fc1bb1f..66574ea39f97 100644
--- a/include/linux/platform_data/dma-mmp_tdma.h
+++ b/include/linux/platform_data/dma-mmp_tdma.h
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-mmp/include/mach/sram.h
- *
  *  SRAM Memory Management
  *
  *  Copyright (c) 2011 Marvell Semiconductors Inc.
@@ -11,8 +9,8 @@
  *
  */
 
-#ifndef __ASM_ARCH_SRAM_H
-#define __ASM_ARCH_SRAM_H
+#ifndef __DMA_MMP_TDMA_H
+#define __DMA_MMP_TDMA_H
 
 #include <linux/genalloc.h>
 
@@ -32,4 +30,4 @@ struct sram_platdata {
 
 extern struct gen_pool *sram_get_gpool(char *pool_name);
 
-#endif /* __ASM_ARCH_SRAM_H */
+#endif /* __DMA_MMP_TDMA_H */
diff --git a/include/linux/platform_data/dma-mv_xor.h b/include/linux/platform_data/dma-mv_xor.h
index 8ec18f64e396..92ffd3245f76 100644
--- a/include/linux/platform_data/dma-mv_xor.h
+++ b/include/linux/platform_data/dma-mv_xor.h
@@ -1,11 +1,9 @@
 /*
- * arch/arm/plat-orion/include/plat/mv_xor.h
- *
  * Marvell XOR platform device data definition file.
  */
 
-#ifndef __PLAT_MV_XOR_H
-#define __PLAT_MV_XOR_H
+#ifndef __DMA_MV_XOR_H
+#define __DMA_MV_XOR_H
 
 #include <linux/dmaengine.h>
 #include <linux/mbus.h>
diff --git a/include/linux/platform_data/eth-netx.h b/include/linux/platform_data/eth-netx.h
index 88af1ac28ead..a395159725d5 100644
--- a/include/linux/platform_data/eth-netx.h
+++ b/include/linux/platform_data/eth-netx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-netx/include/mach/eth.h
- *
  * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,8 +15,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
+#ifndef __ETH_NETX_H
+#define __ETH_NETX_H
 
 struct netxeth_platform_data {
         unsigned int xcno;      /* number of xmac/xpec engine this eth uses */
diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h
index 6efd20264585..fbe2f7535741 100644
--- a/include/linux/platform_data/gpio-davinci.h
+++ b/include/linux/platform_data/gpio-davinci.h
@@ -28,13 +28,12 @@ enum davinci_gpio_type {
 struct davinci_gpio_platform_data {
         u32     ngpio;
         u32     gpio_unbanked;
-        u32     intc_irq_num;
 };
 
 
 struct davinci_gpio_controller {
         struct gpio_chip        chip;
-        int                     irq_base;
+        struct irq_domain       *irq_domain;
         /* Serialize access to GPIO registers */
         spinlock_t              lock;
         void __iomem            *regs;
diff --git a/include/linux/platform_data/gpio-lpc32xx.h b/include/linux/platform_data/gpio-lpc32xx.h
new file mode 100644
index 000000000000..a544e962a818
--- /dev/null
+++ b/include/linux/platform_data/gpio-lpc32xx.h
@@ -0,0 +1,50 @@
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_GPIO_LPC32XX_H
+#define __MACH_GPIO_LPC32XX_H
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 29
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+#endif /* __MACH_GPIO_LPC32XX_H */
diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h
index c167e4429bc7..0e3cce130fe2 100644
--- a/include/linux/platform_data/hwmon-s3c.h
+++ b/include/linux/platform_data/hwmon-s3c.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
+/*
  * Copyright 2005 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
@@ -11,8 +10,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
+#ifndef __HWMON_S3C_H__
+#define __HWMON_S3C_H__
 
 /**
  * s3c_hwmon_chcfg - channel configuration
@@ -47,5 +46,4 @@ struct s3c_hwmon_pdata {
  */
 extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
 
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
+#endif /* __HWMON_S3C_H__ */
diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h
deleted file mode 100644
index 3a8be9cdc95c..000000000000
--- a/include/linux/platform_data/i2c-nomadik.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#ifndef __PDATA_I2C_NOMADIK_H
-#define __PDATA_I2C_NOMADIK_H
-
-enum i2c_freq_mode {
-        I2C_FREQ_MODE_STANDARD,         /* up to 100 Kb/s */
-        I2C_FREQ_MODE_FAST,             /* up to 400 Kb/s */
-        I2C_FREQ_MODE_HIGH_SPEED,       /* up to 3.4 Mb/s */
-        I2C_FREQ_MODE_FAST_PLUS,        /* up to 1 Mb/s */
-};
-
-/**
- * struct nmk_i2c_controller - client specific controller configuration
- * @clk_freq:   clock frequency for the operation mode
- * @slsu:       Slave data setup time in ns.
- *              The needed setup time for three modes of operation
- *              are 250ns, 100ns and 10ns respectively thus leading
- *              to the values of 14, 6, 2 for a 48 MHz i2c clk
- * @tft:        Tx FIFO Threshold in bytes
- * @rft:        Rx FIFO Threshold in bytes
- * @timeout     Slave response timeout(ms)
- * @sm:         speed mode
- */
-struct nmk_i2c_controller {
-        u32             clk_freq;
-        unsigned short  slsu;
-        unsigned char   tft;
-        unsigned char   rft;
-        int timeout;
-        enum i2c_freq_mode      sm;
-};
-
-#endif  /* __PDATA_I2C_NOMADIK_H */
diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h
index 1e2f4e97f428..adccee25b162 100644
--- a/include/linux/platform_data/keypad-ep93xx.h
+++ b/include/linux/platform_data/keypad-ep93xx.h
@@ -1,9 +1,5 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
-#define __ASM_ARCH_EP93XX_KEYPAD_H
+#ifndef __KEYPAD_EP93XX_H
+#define __KEYPAD_EP93XX_H
 
 struct matrix_keymap_data;
 
@@ -32,4 +28,4 @@ struct ep93xx_keypad_platform_data {
 #define EP93XX_MATRIX_ROWS              (8)
 #define EP93XX_MATRIX_COLS              (8)
 
-#endif  /* __ASM_ARCH_EP93XX_KEYPAD_H */
+#endif  /* __KEYPAD_EP93XX_H */
diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h
index a6b21eddb212..c3a3abae98f0 100644
--- a/include/linux/platform_data/keypad-omap.h
+++ b/include/linux/platform_data/keypad-omap.h
@@ -1,14 +1,12 @@
 /*
- *  arch/arm/plat-omap/include/mach/keypad.h
- *
  *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
+#ifndef __KEYPAD_OMAP_H
+#define __KEYPAD_OMAP_H
 
 #ifndef CONFIG_ARCH_OMAP1
 #warning Please update the board to use matrix-keypad driver
diff --git a/include/linux/platform_data/leds-kirkwood-netxbig.h b/include/linux/platform_data/leds-kirkwood-netxbig.h
index 24b536ebdf13..d2be19a51acd 100644
--- a/include/linux/platform_data/leds-kirkwood-netxbig.h
+++ b/include/linux/platform_data/leds-kirkwood-netxbig.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
- *
  * Platform data structure for netxbig LED driver
  *
  * This file is licensed under the terms of the GNU General Public
@@ -8,8 +6,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __MACH_LEDS_NETXBIG_H
-#define __MACH_LEDS_NETXBIG_H
+#ifndef __LEDS_KIRKWOOD_NETXBIG_H
+#define __LEDS_KIRKWOOD_NETXBIG_H
 
 struct netxbig_gpio_ext {
         unsigned        *addr;
@@ -52,4 +50,4 @@ struct netxbig_led_platform_data {
         int                     num_leds;
 };
 
-#endif /* __MACH_LEDS_NETXBIG_H */
+#endif /* __LEDS_KIRKWOOD_NETXBIG_H */
diff --git a/include/linux/platform_data/leds-kirkwood-ns2.h b/include/linux/platform_data/leds-kirkwood-ns2.h
index e21272e5f668..6a9fed57f346 100644
--- a/include/linux/platform_data/leds-kirkwood-ns2.h
+++ b/include/linux/platform_data/leds-kirkwood-ns2.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
- *
  * Platform data structure for Network Space v2 LED driver
  *
  * This file is licensed under the terms of the GNU General Public
@@ -8,8 +6,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __MACH_LEDS_NS2_H
-#define __MACH_LEDS_NS2_H
+#ifndef __LEDS_KIRKWOOD_NS2_H
+#define __LEDS_KIRKWOOD_NS2_H
 
 struct ns2_led {
         const char      *name;
@@ -23,4 +21,4 @@ struct ns2_led_platform_data {
         struct ns2_led  *leds;
 };
 
-#endif /* __MACH_LEDS_NS2_H */
+#endif /* __LEDS_KIRKWOOD_NS2_H */
diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h
index e2a41dd7690c..8da8f94ee15c 100644
--- a/include/linux/platform_data/max197.h
+++ b/include/linux/platform_data/max197.h
@@ -11,6 +11,9 @@
  * For further information, see the Documentation/hwmon/max197 file.
  */
 
+#ifndef _PDATA_MAX197_H
+#define _PDATA_MAX197_H
+
 /**
  * struct max197_platform_data - MAX197 connectivity info
  * @convert:    Function used to start a conversion with control byte ctrl.
@@ -19,3 +22,5 @@
 struct max197_platform_data {
         int (*convert)(u8 ctrl);
 };
+
+#endif /* _PDATA_MAX197_H */
diff --git a/include/linux/platform_data/mfd-mcp-sa11x0.h b/include/linux/platform_data/mfd-mcp-sa11x0.h
index 4b2860ae3828..747cd6baf711 100644
--- a/include/linux/platform_data/mfd-mcp-sa11x0.h
+++ b/include/linux/platform_data/mfd-mcp-sa11x0.h
@@ -1,14 +1,12 @@
 /*
- *  arch/arm/mach-sa1100/include/mach/mcp.h
- *
  *  Copyright (C) 2005 Russell King.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_ARM_ARCH_MCP_H
-#define __ASM_ARM_ARCH_MCP_H
+#ifndef __MFD_MCP_SA11X0_H
+#define __MFD_MCP_SA11X0_H
 
 #include <linux/types.h>
 
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 4da5bfa2147f..3e9dd6676b97 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/nand.h
- *
  * Copyright (C) 2006 Micron Technology Inc.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
index ffb801998e5d..a94147124929 100644
--- a/include/linux/platform_data/mtd-nand-pxa3xx.h
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -55,6 +55,9 @@ struct pxa3xx_nand_platform_data {
         /* indicate how many chip selects will be used */
         int     num_cs;
 
+        /* use an flash-based bad block table */
+        bool    flash_bbt;
+
         const struct mtd_partition              *parts[NUM_CHIP_SELECT];
         unsigned int                            nr_parts[NUM_CHIP_SELECT];
 
diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h
index e9a9fb188f97..56ff0e6f5ad1 100644
--- a/include/linux/platform_data/mtd-onenand-omap2.h
+++ b/include/linux/platform_data/mtd-onenand-omap2.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/onenand.h
- *
  * Copyright (C) 2006 Nokia Corporation
  * Author: Juha Yrjola
  *
diff --git a/include/linux/platform_data/mtd-orion_nand.h b/include/linux/platform_data/mtd-orion_nand.h
index 9f3c180834d1..a7ce77c7c1a8 100644
--- a/include/linux/platform_data/mtd-orion_nand.h
+++ b/include/linux/platform_data/mtd-orion_nand.h
@@ -1,13 +1,11 @@
 /*
- * arch/arm/plat-orion/include/plat/orion_nand.h
- *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __PLAT_ORION_NAND_H
-#define __PLAT_ORION_NAND_H
+#ifndef __MTD_ORION_NAND_H
+#define __MTD_ORION_NAND_H
 
 /*
  * Device bus NAND private data
diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h
deleted file mode 100644
index abf5bed84df3..000000000000
--- a/include/linux/platform_data/pinctrl-nomadik.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * pin configurations are represented by 32-bit integers:
- *
- *      bit  0.. 8 - Pin Number (512 Pins Maximum)
- *      bit  9..10 - Alternate Function Selection
- *      bit 11..12 - Pull up/down state
- *      bit     13 - Sleep mode behaviour
- *      bit     14 - Direction
- *      bit     15 - Value (if output)
- *      bit 16..18 - SLPM pull up/down state
- *      bit 19..20 - SLPM direction
- *      bit 21..22 - SLPM Value (if output)
- *      bit 23..25 - PDIS value (if input)
- *      bit     26 - Gpio mode
- *      bit     27 - Sleep mode
- *
- * to facilitate the definition, the following macros are provided
- *
- * PIN_CFG_DEFAULT - default config (0):
- *                   pull up/down = disabled
- *                   sleep mode = input/wakeup
- *                   direction = input
- *                   value = low
- *                   SLPM direction = same as normal
- *                   SLPM pull = same as normal
- *                   SLPM value = same as normal
- *
- * PIN_CFG         - default config with alternate function
- */
-
-typedef unsigned long pin_cfg_t;
-
-#define PIN_NUM_MASK            0x1ff
-#define PIN_NUM(x)              ((x) & PIN_NUM_MASK)
-
-#define PIN_ALT_SHIFT           9
-#define PIN_ALT_MASK            (0x3 << PIN_ALT_SHIFT)
-#define PIN_ALT(x)              (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
-#define PIN_GPIO                (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
-#define PIN_ALT_A               (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
-#define PIN_ALT_B               (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
-#define PIN_ALT_C               (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
-
-#define PIN_PULL_SHIFT          11
-#define PIN_PULL_MASK           (0x3 << PIN_PULL_SHIFT)
-#define PIN_PULL(x)             (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
-#define PIN_PULL_NONE           (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
-#define PIN_PULL_UP             (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
-#define PIN_PULL_DOWN           (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
-
-#define PIN_SLPM_SHIFT          13
-#define PIN_SLPM_MASK           (0x1 << PIN_SLPM_SHIFT)
-#define PIN_SLPM(x)             (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
-#define PIN_SLPM_MAKE_INPUT     (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
-#define PIN_SLPM_NOCHANGE       (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
-/* These two replace the above in DB8500v2+ */
-#define PIN_SLPM_WAKEUP_ENABLE  (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
-
-#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
-#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
-
-#define PIN_DIR_SHIFT           14
-#define PIN_DIR_MASK            (0x1 << PIN_DIR_SHIFT)
-#define PIN_DIR(x)              (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
-#define PIN_DIR_INPUT           (0 << PIN_DIR_SHIFT)
-#define PIN_DIR_OUTPUT          (1 << PIN_DIR_SHIFT)
-
-#define PIN_VAL_SHIFT           15
-#define PIN_VAL_MASK            (0x1 << PIN_VAL_SHIFT)
-#define PIN_VAL(x)              (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
-#define PIN_VAL_LOW             (0 << PIN_VAL_SHIFT)
-#define PIN_VAL_HIGH            (1 << PIN_VAL_SHIFT)
-
-#define PIN_SLPM_PULL_SHIFT     16
-#define PIN_SLPM_PULL_MASK      (0x7 << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL(x)        \
-        (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_NONE      \
-        ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_UP        \
-        ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_DOWN      \
-        ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
-
-#define PIN_SLPM_DIR_SHIFT      19
-#define PIN_SLPM_DIR_MASK       (0x3 << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR(x)         \
-        (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_INPUT      ((1 + 0) << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_OUTPUT     ((1 + 1) << PIN_SLPM_DIR_SHIFT)
-
-#define PIN_SLPM_VAL_SHIFT      21
-#define PIN_SLPM_VAL_MASK       (0x3 << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL(x)         \
-        (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_LOW        ((1 + 0) << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_HIGH       ((1 + 1) << PIN_SLPM_VAL_SHIFT)
-
-#define PIN_SLPM_PDIS_SHIFT             23
-#define PIN_SLPM_PDIS_MASK              (0x3 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS(x)        \
-        (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_NO_CHANGE         (0 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_DISABLED          (1 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_ENABLED           (2 << PIN_SLPM_PDIS_SHIFT)
-
-#define PIN_LOWEMI_SHIFT        25
-#define PIN_LOWEMI_MASK         (0x1 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI(x)           (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_DISABLED     (0 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_ENABLED      (1 << PIN_LOWEMI_SHIFT)
-
-#define PIN_GPIOMODE_SHIFT      26
-#define PIN_GPIOMODE_MASK       (0x1 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE(x)         (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_DISABLED   (0 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_ENABLED    (1 << PIN_GPIOMODE_SHIFT)
-
-#define PIN_SLEEPMODE_SHIFT     27
-#define PIN_SLEEPMODE_MASK      (0x1 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE(x)        (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_DISABLED  (0 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_ENABLED   (1 << PIN_SLEEPMODE_SHIFT)
-
-
-/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
-#define PIN_INPUT_PULLDOWN      (PIN_DIR_INPUT | PIN_PULL_DOWN)
-#define PIN_INPUT_PULLUP        (PIN_DIR_INPUT | PIN_PULL_UP)
-#define PIN_INPUT_NOPULL        (PIN_DIR_INPUT | PIN_PULL_NONE)
-#define PIN_OUTPUT_LOW          (PIN_DIR_OUTPUT | PIN_VAL_LOW)
-#define PIN_OUTPUT_HIGH         (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
-
-#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
-#define PIN_SLPM_INPUT_PULLUP   (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
-#define PIN_SLPM_INPUT_NOPULL   (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
-#define PIN_SLPM_OUTPUT_LOW     (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
-#define PIN_SLPM_OUTPUT_HIGH    (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
-
-#define PIN_CFG_DEFAULT         (0)
-
-#define PIN_CFG(num, alt)               \
-        (PIN_CFG_DEFAULT |\
-         (PIN_NUM(num) | PIN_##alt))
-
-#define PIN_CFG_INPUT(num, alt, pull)           \
-        (PIN_CFG_DEFAULT |\
-         (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
-
-#define PIN_CFG_OUTPUT(num, alt, val)           \
-        (PIN_CFG_DEFAULT |\
-         (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-#define GPIO_BLOCK_SHIFT 5
-#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT    0x00
-#define NMK_GPIO_DATS   0x04
-#define NMK_GPIO_DATC   0x08
-#define NMK_GPIO_PDIS   0x0c
-#define NMK_GPIO_DIR    0x10
-#define NMK_GPIO_DIRS   0x14
-#define NMK_GPIO_DIRC   0x18
-#define NMK_GPIO_SLPC   0x1c
-#define NMK_GPIO_AFSLA  0x20
-#define NMK_GPIO_AFSLB  0x24
-#define NMK_GPIO_LOWEMI 0x28
-
-#define NMK_GPIO_RIMSC  0x40
-#define NMK_GPIO_FIMSC  0x44
-#define NMK_GPIO_IS     0x48
-#define NMK_GPIO_IC     0x4c
-#define NMK_GPIO_RWIMSC 0x50
-#define NMK_GPIO_FWIMSC 0x54
-#define NMK_GPIO_WKS    0x58
-/* These appear in DB8540 and later ASICs */
-#define NMK_GPIO_EDGELEVEL 0x5C
-#define NMK_GPIO_LEVEL  0x60
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO       0
-#define NMK_GPIO_ALT_A  1
-#define NMK_GPIO_ALT_B  2
-#define NMK_GPIO_ALT_C  (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-#define NMK_GPIO_ALT_CX_SHIFT 2
-#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
-        NMK_GPIO_PULL_NONE,
-        NMK_GPIO_PULL_UP,
-        NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
-        NMK_GPIO_SLPM_INPUT,
-        NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
-        NMK_GPIO_SLPM_NOCHANGE,
-        NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-        char *name;
-        int first_gpio;
-        int first_irq;
-        int num_gpio;
-        u32 (*get_secondary_status)(unsigned int bank);
-        void (*set_ioforce)(bool enable);
-        bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/include/linux/platform_data/pn544.h b/include/linux/platform_data/pn544.h
index 713bfd703342..5ce1ab983f44 100644
--- a/include/linux/platform_data/pn544.h
+++ b/include/linux/platform_data/pn544.h
@@ -16,8 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 
 #ifndef _PN544_H_
diff --git a/include/linux/platform_data/sht15.h b/include/linux/platform_data/sht15.h
index 33e0fd27225e..12289c1e9413 100644
--- a/include/linux/platform_data/sht15.h
+++ b/include/linux/platform_data/sht15.h
@@ -12,6 +12,9 @@
  * For further information, see the Documentation/hwmon/sht15 file.
  */
 
+#ifndef _PDATA_SHT15_H
+#define _PDATA_SHT15_H
+
 /**
  * struct sht15_platform_data - sht15 connectivity info
  * @gpio_data:          no. of gpio to which bidirectional data line is
@@ -31,3 +34,5 @@ struct sht15_platform_data {
         bool no_otp_reload;
         bool low_resolution;
 };
+
+#endif /* _PDATA_SHT15_H */
diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h
index 54334393ab92..a947ab8b441a 100644
--- a/include/linux/platform_data/si5351.h
+++ b/include/linux/platform_data/si5351.h
@@ -8,20 +8,6 @@
 struct clk;
 
 /**
- * enum si5351_variant - SiLabs Si5351 chip variant
- * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input)
- * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input)
- * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input)
- * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input)
- */
-enum si5351_variant {
-        SI5351_VARIANT_A = 1,
-        SI5351_VARIANT_A3 = 2,
-        SI5351_VARIANT_B = 3,
-        SI5351_VARIANT_C = 4,
-};
-
-/**
  * enum si5351_pll_src - Si5351 pll clock source
  * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config
  * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input
@@ -115,14 +101,12 @@ struct si5351_clkout_config {
 
 /**
  * struct si5351_platform_data - Platform data for the Si5351 clock driver
- * @variant: Si5351 chip variant
  * @clk_xtal: xtal input clock
  * @clk_clkin: clkin input clock
  * @pll_src: array of pll source clock setting
  * @clkout: array of clkout configuration
  */
 struct si5351_platform_data {
-        enum si5351_variant variant;
         struct clk *clk_xtal;
         struct clk *clk_clkin;
         enum si5351_pll_src pll_src[2];
diff --git a/include/linux/platform_data/spi-nuc900.h b/include/linux/platform_data/spi-nuc900.h
index 2c4e0c128501..4b3f46832e19 100644
--- a/include/linux/platform_data/spi-nuc900.h
+++ b/include/linux/platform_data/spi-nuc900.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
- *
  * Copyright (c) 2009 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
@@ -11,8 +9,8 @@
  *
  */
 
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H
+#ifndef __SPI_NUC900_H
+#define __SPI_NUC900_H
 
 extern void mfp_set_groupg(struct device *dev, const char *subname);
 
@@ -32,4 +30,4 @@ struct nuc900_spi_chip {
         unsigned char bits_per_word;
 };
 
-#endif /* __ASM_ARCH_SPI_H */
+#endif /* __SPI_NUC900_H */
diff --git a/include/linux/platform_data/usb-ehci-orion.h b/include/linux/platform_data/usb-ehci-orion.h
index 6fc78e430420..52b0acb35fd7 100644
--- a/include/linux/platform_data/usb-ehci-orion.h
+++ b/include/linux/platform_data/usb-ehci-orion.h
@@ -1,13 +1,11 @@
 /*
- * arch/arm/plat-orion/include/plat/ehci-orion.h
- *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __PLAT_EHCI_ORION_H
-#define __PLAT_EHCI_ORION_H
+#ifndef __USB_EHCI_ORION_H
+#define __USB_EHCI_ORION_H
 
 #include <linux/mbus.h>
 
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
new file mode 100644
index 000000000000..43b5ce139c37
--- /dev/null
+++ b/include/linux/platform_data/usb-omap1.h
@@ -0,0 +1,53 @@
+/*
+ * Platform data for OMAP1 USB
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __LINUX_USB_OMAP1_H
+#define __LINUX_USB_OMAP1_H
+
+#include <linux/platform_device.h>
+
+struct omap_usb_config {
+        /* Configure drivers according to the connectors on your board:
+         *  - "A" connector (rectagular)
+         *      ... for host/OHCI use, set "register_host".
+         *  - "B" connector (squarish) or "Mini-B"
+         *      ... for device/gadget use, set "register_dev".
+         *  - "Mini-AB" connector (very similar to Mini-B)
+         *      ... for OTG use as device OR host, initialize "otg"
+         */
+        unsigned        register_host:1;
+        unsigned        register_dev:1;
+        u8              otg;    /* port number, 1-based:  usb1 == 2 */
+
+        const char      *extcon;        /* extcon device for OTG */
+
+        u8              hmc_mode;
+
+        /* implicitly true if otg:  host supports remote wakeup? */
+        u8              rwc;
+
+        /* signaling pins used to talk to transceiver on usbN:
+         *  0 == usbN unused
+         *  2 == usb0-only, using internal transceiver
+         *  3 == 3 wire bidirectional
+         *  4 == 4 wire bidirectional
+         *  6 == 6 wire unidirectional (or TLL)
+         */
+        u8              pins[3];
+
+        struct platform_device *udc_device;
+        struct platform_device *ohci_device;
+        struct platform_device *otg_device;
+
+        u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+        u32 (*usb1_init)(unsigned nwires);
+        u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+        int (*ocpi_enable)(void);
+};
+
+#endif /* __LINUX_USB_OMAP1_H */
diff --git a/include/linux/platform_data/video-ep93xx.h b/include/linux/platform_data/video-ep93xx.h
index d5ae11d7c453..92fc2b2232e7 100644
--- a/include/linux/platform_data/video-ep93xx.h
+++ b/include/linux/platform_data/video-ep93xx.h
@@ -1,9 +1,5 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/fb.h
- */
-
-#ifndef __ASM_ARCH_EP93XXFB_H
-#define __ASM_ARCH_EP93XXFB_H
+#ifndef __VIDEO_EP93XX_H
+#define __VIDEO_EP93XX_H
 
 struct platform_device;
 struct fb_videomode;
@@ -53,4 +49,4 @@ struct ep93xxfb_mach_info {
         void    (*blank)(int blank_mode, struct fb_info *info);
 };
 
-#endif /* __ASM_ARCH_EP93XXFB_H */
+#endif /* __VIDEO_EP93XX_H */
diff --git a/include/linux/platform_data/video-msm_fb.h b/include/linux/platform_data/video-msm_fb.h
index 1f4fc81b3d8f..31449be3eadb 100644
--- a/include/linux/platform_data/video-msm_fb.h
+++ b/include/linux/platform_data/video-msm_fb.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-msm/include/mach/msm_fb.h
- *
+/*
  * Internal shared definitions for various MSM framebuffer parts.
  *
  * Copyright (C) 2007 Google Incorporated
diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h
index 486b4c519ae2..07c6c1e153f8 100644
--- a/include/linux/platform_data/video-pxafb.h
+++ b/include/linux/platform_data/video-pxafb.h
@@ -1,6 +1,4 @@
 /*
- *  arch/arm/mach-pxa/include/mach/pxafb.h
- *
  *  Support for the xscale frame buffer.
  *
  *  Author:     Jean-Frederic Clere
diff --git a/include/linux/platform_data/vsp1.h b/include/linux/platform_data/vsp1.h
index a73a456d7f11..63170e2614b3 100644
--- a/include/linux/platform_data/vsp1.h
+++ b/include/linux/platform_data/vsp1.h
@@ -14,6 +14,8 @@
 #define __PLATFORM_VSP1_H__
 
 #define VSP1_HAS_LIF            (1 << 0)
+#define VSP1_HAS_LUT            (1 << 1)
+#define VSP1_HAS_SRU            (1 << 2)
 
 struct vsp1_platform_data {
         unsigned int features;