93 files changed, 3989 insertions, 1 deletions

diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h
new file mode 100644
index 000000000000..63f3c2804239
--- /dev/null
+++ b/include/linux/platform_data/asoc-imx-ssi.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+        unsigned int flags;
+#define IMX_SSI_DMA            (1 << 0)
+#define IMX_SSI_USE_AC97       (1 << 1)
+#define IMX_SSI_NET            (1 << 2)
+#define IMX_SSI_SYN            (1 << 3)
+#define IMX_SSI_USE_I2S_SLAVE  (1 << 4)
+        void (*ac97_reset) (struct snd_ac97 *ac97);
+        void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
diff --git a/include/linux/platform_data/asoc-kirkwood.h b/include/linux/platform_data/asoc-kirkwood.h
new file mode 100644
index 000000000000..d6a55bd2e578
--- /dev/null
+++ b/include/linux/platform_data/asoc-kirkwood.h
@@ -0,0 +1,7 @@
+#ifndef __PLAT_AUDIO_H
+#define __PLAT_AUDIO_H
+
+struct kirkwood_asoc_platform_data {
+        int burst;
+};
+#endif
diff --git a/include/linux/platform_data/asoc-palm27x.h b/include/linux/platform_data/asoc-palm27x.h
new file mode 100644
index 000000000000..58afb30d5298
--- /dev/null
+++ b/include/linux/platform_data/asoc-palm27x.h
@@ -0,0 +1,8 @@
+#ifndef _INCLUDE_PALMASOC_H_
+#define _INCLUDE_PALMASOC_H_
+
+struct palm27x_asoc_info {
+        int     jack_gpio;
+};
+
+#endif
diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h
new file mode 100644
index 000000000000..aa9875f77c40
--- /dev/null
+++ b/include/linux/platform_data/asoc-s3c.h
@@ -0,0 +1,59 @@
+/* arch/arm/plat-samsung/include/plat/audio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* The machine init code calls s3c*_ac97_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for AC97 pins
+ */
+#define S3C64XX_AC97_GPD  0
+#define S3C64XX_AC97_GPE  1
+extern void s3c64xx_ac97_setup_gpio(int);
+
+/*
+ * The machine init code calls s5p*_spdif_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for S/PDIF pins
+ */
+#define S5PC100_SPDIF_GPD  0
+#define S5PC100_SPDIF_GPG3 1
+extern void s5pc100_spdif_setup_gpio(int);
+
+struct samsung_i2s {
+/* If the Primary DAI has 5.1 Channels */
+#define QUIRK_PRI_6CHAN         (1 << 0)
+/* If the I2S block has a Stereo Overlay Channel */
+#define QUIRK_SEC_DAI           (1 << 1)
+/*
+ * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
+ * The Machine driver must provide suitably set clock to the I2S block.
+ */
+#define QUIRK_NO_MUXPSR         (1 << 2)
+#define QUIRK_NEED_RSTCLR       (1 << 3)
+        /* Quirks of the I2S controller */
+        u32 quirks;
+
+        /*
+         * Array of clock names that can be used to generate I2S signals.
+         * Also corresponds to clocks of I2SMOD[10]
+         */
+        const char **src_clk;
+        dma_addr_t idma_addr;
+};
+
+/**
+ * struct s3c_audio_pdata - common platform data for audio device drivers
+ * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
+ */
+struct s3c_audio_pdata {
+        int (*cfg_gpio)(struct platform_device *);
+        union {
+                struct samsung_i2s i2s;
+        } type;
+};
diff --git a/include/linux/platform_data/asoc-s3c24xx_simtec.h b/include/linux/platform_data/asoc-s3c24xx_simtec.h
new file mode 100644
index 000000000000..376af5286a3e
--- /dev/null
+++ b/include/linux/platform_data/asoc-s3c24xx_simtec.h
@@ -0,0 +1,34 @@
+/* arch/arm/plat-samsung/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+        unsigned int    use_mpllin:1;
+        unsigned int    output_cdclk:1;
+
+        unsigned int    have_mic:1;
+        unsigned int    have_lout:1;
+
+        int             amp_gpio;
+        int             amp_gain[2];
+
+        void    (*startup)(void);
+};
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
new file mode 100644
index 000000000000..18814127809a
--- /dev/null
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+
+#define MCBSP_CONFIG_TYPE2      0x2
+#define MCBSP_CONFIG_TYPE3      0x3
+#define MCBSP_CONFIG_TYPE4      0x4
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+        void (*request)(unsigned int);
+        void (*free)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+        struct omap_mcbsp_ops *ops;
+        u16 buffer_size;
+        u8 reg_size;
+        u8 reg_step;
+
+        /* McBSP platform and instance specific features */
+        bool has_wakeup; /* Wakeup capability */
+        bool has_ccr; /* Transceiver has configuration control registers */
+        int (*enable_st_clock)(unsigned int, bool);
+        int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+        int (*mux_signal)(struct device *dev, const char *signal, const char *src);
+};
+
+/**
+ * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
+ * @sidetone: name of the sidetone device
+ */
+struct omap_mcbsp_dev_attr {
+        const char *sidetone;
+};
+
+#endif
diff --git a/include/linux/platform_data/ata-pxa.h b/include/linux/platform_data/ata-pxa.h
new file mode 100644
index 000000000000..6cf7df1d5830
--- /dev/null
+++ b/include/linux/platform_data/ata-pxa.h
@@ -0,0 +1,33 @@
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_PATA_PXA_H__
+#define __MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+        /* PXA DMA DREQ<0:2> pin */
+        uint32_t        dma_dreq;
+        /* Register shift */
+        uint32_t        reg_shift;
+        /* IRQ flags */
+        uint32_t        irq_flags;
+};
+
+#endif  /* __MACH_PATA_PXA_H__ */
diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
new file mode 100644
index 000000000000..2a3855a8372a
--- /dev/null
+++ b/include/linux/platform_data/ata-samsung_cf.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Samsung CF-ATA platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_H
+#define __ASM_PLAT_ATA_H __FILE__
+
+/**
+ * struct s3c_ide_platdata - S3C IDE driver platform data.
+ * @setup_gpio: Setup the external GPIO pins to the right state for data
+ * transfer in true-ide mode.
+ */
+struct s3c_ide_platdata {
+        void (*setup_gpio)(void);
+};
+
+/*
+ * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * @pdata: Platform data for IDE driver.
+ */
+extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
+
+/* architecture-specific IDE configuration */
+extern void s3c64xx_ide_setup_gpio(void);
+extern void s5pc100_ide_setup_gpio(void);
+extern void s5pv210_ide_setup_gpio(void);
+
+#endif /*__ASM_PLAT_ATA_H */
diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h
index e7a1949bad26..ab68082fbcb0 100644
--- a/include/linux/platform_data/atmel-aes.h
+++ b/include/linux/platform_data/atmel-aes.h
@@ -1,7 +1,7 @@
 #ifndef __LINUX_ATMEL_AES_H
 #define __LINUX_ATMEL_AES_H
 
-#include <mach/at_hdmac.h>
+#include <linux/platform_data/dma-atmel.h>
 
 /**
  * struct aes_dma_data - DMA data for AES
diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h
new file mode 100644
index 000000000000..4fd6c70314b4
--- /dev/null
+++ b/include/linux/platform_data/camera-mx1.h
@@ -0,0 +1,35 @@
+/*
+ * mx1_camera.h - i.MX1/i.MXL camera driver header file
+ *
+ * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * Based on PXA camera.h file:
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define MX1_CAMERA_DATA_HIGH    1
+#define MX1_CAMERA_PCLK_RISING  2
+#define MX1_CAMERA_VSYNC_HIGH   4
+
+extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
+
+/**
+ * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
+ * @mclk_10khz: master clock frequency in 10kHz units
+ * @flags:      MX1 camera platform flags
+ */
+struct mx1_camera_pdata {
+        unsigned long mclk_10khz;
+        unsigned long flags;
+};
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/include/linux/platform_data/camera-mx2.h b/include/linux/platform_data/camera-mx2.h
new file mode 100644
index 000000000000..7ded6f1f74bc
--- /dev/null
+++ b/include/linux/platform_data/camera-mx2.h
@@ -0,0 +1,44 @@
+/*
+ * mx2-cam.h - i.MX27/i.MX25 camera driver header file
+ *
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX2_CAM_H_
+#define __MACH_MX2_CAM_H_
+
+#define MX2_CAMERA_EXT_VSYNC            (1 << 1)
+#define MX2_CAMERA_CCIR                 (1 << 2)
+#define MX2_CAMERA_CCIR_INTERLACE       (1 << 3)
+#define MX2_CAMERA_HSYNC_HIGH           (1 << 4)
+#define MX2_CAMERA_GATED_CLOCK          (1 << 5)
+#define MX2_CAMERA_INV_DATA             (1 << 6)
+#define MX2_CAMERA_PCLK_SAMPLE_RISING   (1 << 7)
+
+/**
+ * struct mx2_camera_platform_data - optional platform data for mx2_camera
+ * @flags: any combination of MX2_CAMERA_*
+ * @clk: clock rate of the csi block / 2
+ */
+struct mx2_camera_platform_data {
+        unsigned long flags;
+        unsigned long clk;
+};
+
+#endif /* __MACH_MX2_CAM_H_ */
diff --git a/include/linux/platform_data/camera-mx3.h b/include/linux/platform_data/camera-mx3.h
new file mode 100644
index 000000000000..f226ee3777e1
--- /dev/null
+++ b/include/linux/platform_data/camera-mx3.h
@@ -0,0 +1,48 @@
+/*
+ * mx3_camera.h - i.MX3x camera driver header file
+ *
+ * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MX3_CAMERA_H_
+#define _MX3_CAMERA_H_
+
+#include <linux/device.h>
+
+#define MX3_CAMERA_CLK_SRC      1
+#define MX3_CAMERA_EXT_VSYNC    2
+#define MX3_CAMERA_DP           4
+#define MX3_CAMERA_PCP          8
+#define MX3_CAMERA_HSP          0x10
+#define MX3_CAMERA_VSP          0x20
+#define MX3_CAMERA_DATAWIDTH_4  0x40
+#define MX3_CAMERA_DATAWIDTH_8  0x80
+#define MX3_CAMERA_DATAWIDTH_10 0x100
+#define MX3_CAMERA_DATAWIDTH_15 0x200
+
+#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
+                                   MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
+
+/**
+ * struct mx3_camera_pdata - i.MX3x camera platform data
+ * @flags:      MX3_CAMERA_* flags
+ * @mclk_10khz: master clock frequency in 10kHz units
+ * @dma_dev:    IPU DMA device to match against in channel allocation
+ */
+struct mx3_camera_pdata {
+        unsigned long flags;
+        unsigned long mclk_10khz;
+        struct device *dma_dev;
+};
+
+#endif
diff --git a/include/linux/platform_data/camera-pxa.h b/include/linux/platform_data/camera-pxa.h
new file mode 100644
index 000000000000..6709b1cd7c77
--- /dev/null
+++ b/include/linux/platform_data/camera-pxa.h
@@ -0,0 +1,44 @@
+/*
+    camera.h - PXA camera driver header file
+
+    Copyright (C) 2003, Intel Corporation
+    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER       1
+#define PXA_CAMERA_DATAWIDTH_4  2
+#define PXA_CAMERA_DATAWIDTH_5  4
+#define PXA_CAMERA_DATAWIDTH_8  8
+#define PXA_CAMERA_DATAWIDTH_9  0x10
+#define PXA_CAMERA_DATAWIDTH_10 0x20
+#define PXA_CAMERA_PCLK_EN      0x40
+#define PXA_CAMERA_MCLK_EN      0x80
+#define PXA_CAMERA_PCP          0x100
+#define PXA_CAMERA_HSP          0x200
+#define PXA_CAMERA_VSP          0x400
+
+struct pxacamera_platform_data {
+        unsigned long flags;
+        unsigned long mclk_10khz;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h
new file mode 100644
index 000000000000..2e426a7dbc51
--- /dev/null
+++ b/include/linux/platform_data/clk-realview.h
@@ -0,0 +1 @@
+void realview_clk_init(void __iomem *sysbase, bool is_pb1176);
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
new file mode 100644
index 000000000000..3af0da1f3be5
--- /dev/null
+++ b/include/linux/platform_data/clk-ux500.h
@@ -0,0 +1,17 @@
+/*
+ * Clock definitions for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __CLK_UX500_H
+#define __CLK_UX500_H
+
+void u8500_clk_init(void);
+void u9540_clk_init(void);
+void u8540_clk_init(void);
+
+#endif /* __CLK_UX500_H */
diff --git a/include/linux/platform_data/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h
new file mode 100644
index 000000000000..5b2d0817e26a
--- /dev/null
+++ b/include/linux/platform_data/crypto-ux500.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _CRYPTO_UX500_H
+#define _CRYPTO_UX500_H
+#include <linux/dmaengine.h>
+#include <plat/ste_dma40.h>
+
+struct hash_platform_data {
+        void *mem_to_engine;
+        bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+};
+
+struct cryp_platform_data {
+        struct stedma40_chan_cfg mem_to_engine;
+        struct stedma40_chan_cfg engine_to_mem;
+};
+
+#endif
diff --git a/include/linux/platform_data/dma-atmel.h b/include/linux/platform_data/dma-atmel.h
new file mode 100644
index 000000000000..cab0997be3de
--- /dev/null
+++ b/include/linux/platform_data/dma-atmel.h
@@ -0,0 +1,61 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+        unsigned int    nr_channels;
+        dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @cfg: Platform-specific initializer for the CFG register
+ */
+struct at_dma_slave {
+        struct device           *dma_dev;
+        u32                     cfg;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define ATC_SRC_PER(h)          (0xFU & (h))    /* Channel src rq associated with periph handshaking ifc h */
+#define ATC_DST_PER(h)          ((0xFU & (h)) <<  4)    /* Channel dst rq associated with periph handshaking ifc h */
+#define ATC_SRC_REP             (0x1 <<  8)     /* Source Replay Mod */
+#define ATC_SRC_H2SEL           (0x1 <<  9)     /* Source Handshaking Mod */
+#define         ATC_SRC_H2SEL_SW        (0x0 <<  9)
+#define         ATC_SRC_H2SEL_HW        (0x1 <<  9)
+#define ATC_DST_REP             (0x1 << 12)     /* Destination Replay Mod */
+#define ATC_DST_H2SEL           (0x1 << 13)     /* Destination Handshaking Mod */
+#define         ATC_DST_H2SEL_SW        (0x0 << 13)
+#define         ATC_DST_H2SEL_HW        (0x1 << 13)
+#define ATC_SOD                 (0x1 << 16)     /* Stop On Done */
+#define ATC_LOCK_IF             (0x1 << 20)     /* Interface Lock */
+#define ATC_LOCK_B              (0x1 << 21)     /* AHB Bus Lock */
+#define ATC_LOCK_IF_L           (0x1 << 22)     /* Master Interface Arbiter Lock */
+#define         ATC_LOCK_IF_L_CHUNK     (0x0 << 22)
+#define         ATC_LOCK_IF_L_BUFFER    (0x1 << 22)
+#define ATC_AHB_PROT_MASK       (0x7 << 24)     /* AHB Protection */
+#define ATC_FIFOCFG_MASK        (0x3 << 28)     /* FIFO Request Configuration */
+#define         ATC_FIFOCFG_LARGESTBURST        (0x0 << 28)
+#define         ATC_FIFOCFG_HALFFIFO            (0x1 << 28)
+#define         ATC_FIFOCFG_ENOUGHSPACE         (0x2 << 28)
+
+
+#endif /* AT_HDMAC_H */
diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h
new file mode 100644
index 000000000000..e82c642fa53c
--- /dev/null
+++ b/include/linux/platform_data/dma-ep93xx.h
@@ -0,0 +1,93 @@
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+
+/*
+ * M2P channels.
+ *
+ * Note that these values are also directly used for setting the PPALLOC
+ * register.
+ */
+#define EP93XX_DMA_I2S1         0
+#define EP93XX_DMA_I2S2         1
+#define EP93XX_DMA_AAC1         2
+#define EP93XX_DMA_AAC2         3
+#define EP93XX_DMA_AAC3         4
+#define EP93XX_DMA_I2S3         5
+#define EP93XX_DMA_UART1        6
+#define EP93XX_DMA_UART2        7
+#define EP93XX_DMA_UART3        8
+#define EP93XX_DMA_IRDA         9
+/* M2M channels */
+#define EP93XX_DMA_SSP          10
+#define EP93XX_DMA_IDE          11
+
+/**
+ * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
+ * @port: peripheral which is requesting the channel
+ * @direction: TX/RX channel
+ * @name: optional name for the channel, this is displayed in /proc/interrupts
+ *
+ * This information is passed as private channel parameter in a filter
+ * function. Note that this is only needed for slave/cyclic channels.  For
+ * memcpy channels %NULL data should be passed.
+ */
+struct ep93xx_dma_data {
+        int                             port;
+        enum dma_transfer_direction     direction;
+        const char                      *name;
+};
+
+/**
+ * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
+ * @name: name of the channel, used for getting the right clock for the channel
+ * @base: mapped registers
+ * @irq: interrupt number used by this channel
+ */
+struct ep93xx_dma_chan_data {
+        const char                      *name;
+        void __iomem                    *base;
+        int                             irq;
+};
+
+/**
+ * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
+ * @channels: array of channels which are passed to the driver
+ * @num_channels: number of channels in the array
+ *
+ * This structure is passed to the DMA engine driver via platform data. For
+ * M2P channels, contract is that even channels are for TX and odd for RX.
+ * There is no requirement for the M2M channels.
+ */
+struct ep93xx_dma_platform_data {
+        struct ep93xx_dma_chan_data     *channels;
+        size_t                          num_channels;
+};
+
+static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
+{
+        return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
+}
+
+/**
+ * ep93xx_dma_chan_direction - returns direction the channel can be used
+ * @chan: channel
+ *
+ * This function can be used in filter functions to find out whether the
+ * channel supports given DMA direction. Only M2P channels have such
+ * limitation, for M2M channels the direction is configurable.
+ */
+static inline enum dma_transfer_direction
+ep93xx_dma_chan_direction(struct dma_chan *chan)
+{
+        if (!ep93xx_dma_chan_is_m2p(chan))
+                return DMA_NONE;
+
+        /* even channels are for TX, odd for RX */
+        return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+}
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
new file mode 100644
index 000000000000..3a3942823c20
--- /dev/null
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -0,0 +1,59 @@
+#ifndef __MACH_MXC_SDMA_H__
+#define __MACH_MXC_SDMA_H__
+
+/**
+ * struct sdma_script_start_addrs - SDMA script start pointers
+ *
+ * start addresses of the different functions in the physical
+ * address space of the SDMA engine.
+ */
+struct sdma_script_start_addrs {
+        s32 ap_2_ap_addr;
+        s32 ap_2_bp_addr;
+        s32 ap_2_ap_fixed_addr;
+        s32 bp_2_ap_addr;
+        s32 loopback_on_dsp_side_addr;
+        s32 mcu_interrupt_only_addr;
+        s32 firi_2_per_addr;
+        s32 firi_2_mcu_addr;
+        s32 per_2_firi_addr;
+        s32 mcu_2_firi_addr;
+        s32 uart_2_per_addr;
+        s32 uart_2_mcu_addr;
+        s32 per_2_app_addr;
+        s32 mcu_2_app_addr;
+        s32 per_2_per_addr;
+        s32 uartsh_2_per_addr;
+        s32 uartsh_2_mcu_addr;
+        s32 per_2_shp_addr;
+        s32 mcu_2_shp_addr;
+        s32 ata_2_mcu_addr;
+        s32 mcu_2_ata_addr;
+        s32 app_2_per_addr;
+        s32 app_2_mcu_addr;
+        s32 shp_2_per_addr;
+        s32 shp_2_mcu_addr;
+        s32 mshc_2_mcu_addr;
+        s32 mcu_2_mshc_addr;
+        s32 spdif_2_mcu_addr;
+        s32 mcu_2_spdif_addr;
+        s32 asrc_2_mcu_addr;
+        s32 ext_mem_2_ipu_addr;
+        s32 descrambler_addr;
+        s32 dptc_dvfs_addr;
+        s32 utra_addr;
+        s32 ram_code_start_addr;
+};
+
+/**
+ * struct sdma_platform_data - platform specific data for SDMA engine
+ *
+ * @fw_name             The firmware name
+ * @script_addrs        SDMA scripts addresses in SDMA ROM
+ */
+struct sdma_platform_data {
+        char *fw_name;
+        struct sdma_script_start_addrs *script_addrs;
+};
+
+#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
new file mode 100644
index 000000000000..1b9080385b46
--- /dev/null
+++ b/include/linux/platform_data/dma-imx.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_DMA_H__
+#define __ASM_ARCH_MXC_DMA_H__
+
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+/*
+ * This enumerates peripheral types. Used for SDMA.
+ */
+enum sdma_peripheral_type {
+        IMX_DMATYPE_SSI,        /* MCU domain SSI */
+        IMX_DMATYPE_SSI_SP,     /* Shared SSI */
+        IMX_DMATYPE_MMC,        /* MMC */
+        IMX_DMATYPE_SDHC,       /* SDHC */
+        IMX_DMATYPE_UART,       /* MCU domain UART */
+        IMX_DMATYPE_UART_SP,    /* Shared UART */
+        IMX_DMATYPE_FIRI,       /* FIRI */
+        IMX_DMATYPE_CSPI,       /* MCU domain CSPI */
+        IMX_DMATYPE_CSPI_SP,    /* Shared CSPI */
+        IMX_DMATYPE_SIM,        /* SIM */
+        IMX_DMATYPE_ATA,        /* ATA */
+        IMX_DMATYPE_CCM,        /* CCM */
+        IMX_DMATYPE_EXT,        /* External peripheral */
+        IMX_DMATYPE_MSHC,       /* Memory Stick Host Controller */
+        IMX_DMATYPE_MSHC_SP,    /* Shared Memory Stick Host Controller */
+        IMX_DMATYPE_DSP,        /* DSP */
+        IMX_DMATYPE_MEMORY,     /* Memory */
+        IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
+        IMX_DMATYPE_SPDIF,      /* SPDIF */
+        IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */
+        IMX_DMATYPE_ASRC,       /* ASRC */
+        IMX_DMATYPE_ESAI,       /* ESAI */
+};
+
+enum imx_dma_prio {
+        DMA_PRIO_HIGH = 0,
+        DMA_PRIO_MEDIUM = 1,
+        DMA_PRIO_LOW = 2
+};
+
+struct imx_dma_data {
+        int dma_request; /* DMA request line */
+        enum sdma_peripheral_type peripheral_type;
+        int priority;
+};
+
+static inline int imx_dma_is_ipu(struct dma_chan *chan)
+{
+        return !strcmp(dev_name(chan->device->dev), "ipu-core");
+}
+
+static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
+{
+        return strstr(dev_name(chan->device->dev), "sdma") ||
+                !strcmp(dev_name(chan->device->dev), "imx-dma");
+}
+
+#endif
diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h
new file mode 100644
index 000000000000..239e0fc1bb1f
--- /dev/null
+++ b/include/linux/platform_data/dma-mmp_tdma.h
@@ -0,0 +1,35 @@
+/*
+ *  linux/arch/arm/mach-mmp/include/mach/sram.h
+ *
+ *  SRAM Memory Management
+ *
+ *  Copyright (c) 2011 Marvell Semiconductors Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_SRAM_H
+#define __ASM_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY        512
+
+enum sram_type {
+        MMP_SRAM_UNDEFINED = 0,
+        MMP_ASRAM,
+        MMP_ISRAM,
+};
+
+struct sram_platdata {
+        char *pool_name;
+        int granularity;
+};
+
+extern struct gen_pool *sram_get_gpool(char *pool_name);
+
+#endif /* __ASM_ARCH_SRAM_H */
diff --git a/include/linux/platform_data/dma-mv_xor.h b/include/linux/platform_data/dma-mv_xor.h
new file mode 100644
index 000000000000..2ba1f7d76eef
--- /dev/null
+++ b/include/linux/platform_data/dma-mv_xor.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-orion/include/plat/mv_xor.h
+ *
+ * Marvell XOR platform device data definition file.
+ */
+
+#ifndef __PLAT_MV_XOR_H
+#define __PLAT_MV_XOR_H
+
+#include <linux/dmaengine.h>
+#include <linux/mbus.h>
+
+#define MV_XOR_SHARED_NAME      "mv_xor_shared"
+#define MV_XOR_NAME             "mv_xor"
+
+struct mv_xor_platform_data {
+        struct platform_device          *shared;
+        int                             hw_id;
+        dma_cap_mask_t                  cap_mask;
+        size_t                          pool_size;
+};
+
+
+#endif
diff --git a/include/linux/platform_data/dsp-omap.h b/include/linux/platform_data/dsp-omap.h
new file mode 100644
index 000000000000..5927709b1908
--- /dev/null
+++ b/include/linux/platform_data/dsp-omap.h
@@ -0,0 +1,34 @@
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+        void (*dsp_set_min_opp) (u8 opp_id);
+        u8 (*dsp_get_opp) (void);
+        void (*cpu_set_freq) (unsigned long f);
+        unsigned long (*cpu_get_freq) (void);
+        unsigned long mpu_speed[6];
+
+        /* functions to write and read PRCM registers */
+        void (*dsp_prm_write)(u32, s16 , u16);
+        u32 (*dsp_prm_read)(s16 , u16);
+        u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+        void (*dsp_cm_write)(u32, s16 , u16);
+        u32 (*dsp_cm_read)(s16 , u16);
+        u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+        void (*set_bootaddr)(u32);
+        void (*set_bootmode)(u8);
+
+        phys_addr_t phys_mempool_base;
+        phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
diff --git a/include/linux/platform_data/eth-netx.h b/include/linux/platform_data/eth-netx.h
new file mode 100644
index 000000000000..88af1ac28ead
--- /dev/null
+++ b/include/linux/platform_data/eth-netx.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-netx/include/mach/eth.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef ASMARM_ARCH_ETH_H
+#define ASMARM_ARCH_ETH_H
+
+struct netxeth_platform_data {
+        unsigned int xcno;      /* number of xmac/xpec engine this eth uses */
+};
+
+#endif
diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h
new file mode 100644
index 000000000000..c167e4429bc7
--- /dev/null
+++ b/include/linux/platform_data/hwmon-s3c.h
@@ -0,0 +1,51 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+        const char      *name;
+        unsigned int    mult;
+        unsigned int    div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+        struct s3c_hwmon_chcfg  *in[8];
+};
+
+/**
+ * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with the S3C HWMON device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h
new file mode 100644
index 000000000000..2312d197dfb7
--- /dev/null
+++ b/include/linux/platform_data/i2c-davinci.h
@@ -0,0 +1,26 @@
+/*
+ * DaVinci I2C controller platform_device info
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+*/
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+/* All frequencies are expressed in kHz */
+struct davinci_i2c_platform_data {
+        unsigned int    bus_freq;       /* standard bus frequency (kHz) */
+        unsigned int    bus_delay;      /* post-transaction delay (usec) */
+        unsigned int    sda_pin;        /* GPIO pin ID to use for SDA */
+        unsigned int    scl_pin;        /* GPIO pin ID to use for SCL */
+};
+
+/* for board setup code */
+void davinci_init_i2c(struct davinci_i2c_platform_data *);
+
+#endif /* __ASM_ARCH_I2C_H */
diff --git a/include/linux/platform_data/i2c-imx.h b/include/linux/platform_data/i2c-imx.h
new file mode 100644
index 000000000000..8289d915e615
--- /dev/null
+++ b/include/linux/platform_data/i2c-imx.h
@@ -0,0 +1,21 @@
+/*
+ * i2c.h - i.MX I2C driver header file
+ *
+ * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __ASM_ARCH_I2C_H_
+#define __ASM_ARCH_I2C_H_
+
+/**
+ * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
+ * @bitrate:    Bus speed measured in Hz
+ *
+ **/
+struct imxi2c_platform_data {
+        u32 bitrate;
+};
+
+#endif /* __ASM_ARCH_I2C_H_ */
diff --git a/include/linux/platform_data/i2c-nuc900.h b/include/linux/platform_data/i2c-nuc900.h
new file mode 100644
index 000000000000..9ffb12d06e91
--- /dev/null
+++ b/include/linux/platform_data/i2c-nuc900.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_ARCH_NUC900_I2C_H
+#define __ASM_ARCH_NUC900_I2C_H
+
+struct nuc900_platform_i2c {
+        int             bus_num;
+        unsigned long   bus_freq;
+};
+
+#endif /* __ASM_ARCH_NUC900_I2C_H */
diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h
new file mode 100644
index 000000000000..51d52e767a19
--- /dev/null
+++ b/include/linux/platform_data/i2c-s3c2410.h
@@ -0,0 +1,77 @@
+/* arch/arm/plat-s3c/include/plat/iic.h
+ *
+ * Copyright 2004-2009 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_H
+#define __ASM_ARCH_IIC_H __FILE__
+
+#define S3C_IICFLG_FILTER       (1<<0)  /* enable s3c2440 filter */
+
+/**
+ *      struct s3c2410_platform_i2c - Platform data for s3c I2C.
+ *      @bus_num: The bus number to use (if possible).
+ *      @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
+ *      @slave_addr: The I2C address for the slave device (if enabled).
+ *      @frequency: The desired frequency in Hz of the bus.  This is
+ *                  guaranteed to not be exceeded.  If the caller does
+ *                  not care, use zero and the driver will select a
+ *                  useful default.
+ *      @sda_delay: The delay (in ns) applied to SDA edges.
+ *      @cfg_gpio: A callback to configure the pins for I2C operation.
+ */
+struct s3c2410_platform_i2c {
+        int             bus_num;
+        unsigned int    flags;
+        unsigned int    slave_addr;
+        unsigned long   frequency;
+        unsigned int    sda_delay;
+
+        void    (*cfg_gpio)(struct platform_device *dev);
+};
+
+/**
+ * s3c_i2c0_set_platdata - set platform data for i2c0 device
+ * @i2c: The platform data to set, or NULL for default data.
+ *
+ * Register the given platform data for use with the i2c0 device. This
+ * call copies the platform data, so the caller can use __initdata for
+ * their copy.
+ *
+ * This call will set cfg_gpio if is null to the default platform
+ * implementation.
+ *
+ * Any user of s3c_device_i2c0 should call this, even if it is with
+ * NULL to ensure that the device is given the default platform data
+ * as the driver will no longer carry defaults.
+ */
+extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
+
+/* defined by architecture to configure gpio */
+extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
+
+extern struct s3c2410_platform_i2c default_i2c_data;
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/include/linux/platform_data/irda-pxaficp.h b/include/linux/platform_data/irda-pxaficp.h
new file mode 100644
index 000000000000..3cd41f77dda4
--- /dev/null
+++ b/include/linux/platform_data/irda-pxaficp.h
@@ -0,0 +1,25 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF          1
+#define IR_SIRMODE      2
+#define IR_FIRMODE      4
+
+struct pxaficp_platform_data {
+        int transceiver_cap;
+        void (*transceiver_mode)(struct device *dev, int mode);
+        int (*startup)(struct device *dev);
+        void (*shutdown)(struct device *dev);
+        int gpio_pwdown;                /* powerdown GPIO for the IrDA chip */
+        bool gpio_pwdown_inverted;      /* gpio_pwdown is inverted */
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
+#endif
diff --git a/include/linux/platform_data/keyboard-pxa930_rotary.h b/include/linux/platform_data/keyboard-pxa930_rotary.h
new file mode 100644
index 000000000000..053587caffdd
--- /dev/null
+++ b/include/linux/platform_data/keyboard-pxa930_rotary.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_ARCH_PXA930_ROTARY_H
+#define __ASM_ARCH_PXA930_ROTARY_H
+
+/* NOTE:
+ *
+ * rotary can be either interpreted as a ralative input event (e.g.
+ * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
+ * or LEFT/RIGHT), depending on if up_key & down_key are assigned
+ * or rel_code is assigned a non-zero value. When all are non-zero,
+ * up_key and down_key will be preferred.
+ */
+struct pxa930_rotary_platform_data {
+        int     up_key;
+        int     down_key;
+        int     rel_code;
+};
+
+void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA930_ROTARY_H */
diff --git a/include/linux/platform_data/keyboard-spear.h b/include/linux/platform_data/keyboard-spear.h
new file mode 100644
index 000000000000..9248e3a7e333
--- /dev/null
+++ b/include/linux/platform_data/keyboard-spear.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_KEYBOARD_H
+#define __PLAT_KEYBOARD_H
+
+#include <linux/bitops.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/types.h>
+
+#define DECLARE_9x9_KEYMAP(_name) \
+int _name[] = { \
+        KEY(0, 0, KEY_ESC), \
+        KEY(0, 1, KEY_1), \
+        KEY(0, 2, KEY_2), \
+        KEY(0, 3, KEY_3), \
+        KEY(0, 4, KEY_4), \
+        KEY(0, 5, KEY_5), \
+        KEY(0, 6, KEY_6), \
+        KEY(0, 7, KEY_7), \
+        KEY(0, 8, KEY_8), \
+        KEY(1, 0, KEY_9), \
+        KEY(1, 1, KEY_MINUS), \
+        KEY(1, 2, KEY_EQUAL), \
+        KEY(1, 3, KEY_BACKSPACE), \
+        KEY(1, 4, KEY_TAB), \
+        KEY(1, 5, KEY_Q), \
+        KEY(1, 6, KEY_W), \
+        KEY(1, 7, KEY_E), \
+        KEY(1, 8, KEY_R), \
+        KEY(2, 0, KEY_T), \
+        KEY(2, 1, KEY_Y), \
+        KEY(2, 2, KEY_U), \
+        KEY(2, 3, KEY_I), \
+        KEY(2, 4, KEY_O), \
+        KEY(2, 5, KEY_P), \
+        KEY(2, 6, KEY_LEFTBRACE), \
+        KEY(2, 7, KEY_RIGHTBRACE), \
+        KEY(2, 8, KEY_ENTER), \
+        KEY(3, 0, KEY_LEFTCTRL), \
+        KEY(3, 1, KEY_A), \
+        KEY(3, 2, KEY_S), \
+        KEY(3, 3, KEY_D), \
+        KEY(3, 4, KEY_F), \
+        KEY(3, 5, KEY_G), \
+        KEY(3, 6, KEY_H), \
+        KEY(3, 7, KEY_J), \
+        KEY(3, 8, KEY_K), \
+        KEY(4, 0, KEY_L), \
+        KEY(4, 1, KEY_SEMICOLON), \
+        KEY(4, 2, KEY_APOSTROPHE), \
+        KEY(4, 3, KEY_GRAVE), \
+        KEY(4, 4, KEY_LEFTSHIFT), \
+        KEY(4, 5, KEY_BACKSLASH), \
+        KEY(4, 6, KEY_Z), \
+        KEY(4, 7, KEY_X), \
+        KEY(4, 8, KEY_C), \
+        KEY(5, 0, KEY_V), \
+        KEY(5, 1, KEY_B), \
+        KEY(5, 2, KEY_N), \
+        KEY(5, 3, KEY_M), \
+        KEY(5, 4, KEY_COMMA), \
+        KEY(5, 5, KEY_DOT), \
+        KEY(5, 6, KEY_SLASH), \
+        KEY(5, 7, KEY_RIGHTSHIFT), \
+        KEY(5, 8, KEY_KPASTERISK), \
+        KEY(6, 0, KEY_LEFTALT), \
+        KEY(6, 1, KEY_SPACE), \
+        KEY(6, 2, KEY_CAPSLOCK), \
+        KEY(6, 3, KEY_F1), \
+        KEY(6, 4, KEY_F2), \
+        KEY(6, 5, KEY_F3), \
+        KEY(6, 6, KEY_F4), \
+        KEY(6, 7, KEY_F5), \
+        KEY(6, 8, KEY_F6), \
+        KEY(7, 0, KEY_F7), \
+        KEY(7, 1, KEY_F8), \
+        KEY(7, 2, KEY_F9), \
+        KEY(7, 3, KEY_F10), \
+        KEY(7, 4, KEY_NUMLOCK), \
+        KEY(7, 5, KEY_SCROLLLOCK), \
+        KEY(7, 6, KEY_KP7), \
+        KEY(7, 7, KEY_KP8), \
+        KEY(7, 8, KEY_KP9), \
+        KEY(8, 0, KEY_KPMINUS), \
+        KEY(8, 1, KEY_KP4), \
+        KEY(8, 2, KEY_KP5), \
+        KEY(8, 3, KEY_KP6), \
+        KEY(8, 4, KEY_KPPLUS), \
+        KEY(8, 5, KEY_KP1), \
+        KEY(8, 6, KEY_KP2), \
+        KEY(8, 7, KEY_KP3), \
+        KEY(8, 8, KEY_KP0), \
+}
+
+#define DECLARE_6x6_KEYMAP(_name) \
+int _name[] = { \
+        KEY(0, 0, KEY_RESERVED), \
+        KEY(0, 1, KEY_1), \
+        KEY(0, 2, KEY_2), \
+        KEY(0, 3, KEY_3), \
+        KEY(0, 4, KEY_4), \
+        KEY(0, 5, KEY_5), \
+        KEY(1, 0, KEY_Q), \
+        KEY(1, 1, KEY_W), \
+        KEY(1, 2, KEY_E), \
+        KEY(1, 3, KEY_R), \
+        KEY(1, 4, KEY_T), \
+        KEY(1, 5, KEY_Y), \
+        KEY(2, 0, KEY_D), \
+        KEY(2, 1, KEY_F), \
+        KEY(2, 2, KEY_G), \
+        KEY(2, 3, KEY_H), \
+        KEY(2, 4, KEY_J), \
+        KEY(2, 5, KEY_K), \
+        KEY(3, 0, KEY_B), \
+        KEY(3, 1, KEY_N), \
+        KEY(3, 2, KEY_M), \
+        KEY(3, 3, KEY_COMMA), \
+        KEY(3, 4, KEY_DOT), \
+        KEY(3, 5, KEY_SLASH), \
+        KEY(4, 0, KEY_F6), \
+        KEY(4, 1, KEY_F7), \
+        KEY(4, 2, KEY_F8), \
+        KEY(4, 3, KEY_F9), \
+        KEY(4, 4, KEY_F10), \
+        KEY(4, 5, KEY_NUMLOCK), \
+        KEY(5, 0, KEY_KP2), \
+        KEY(5, 1, KEY_KP3), \
+        KEY(5, 2, KEY_KP0), \
+        KEY(5, 3, KEY_KPDOT), \
+        KEY(5, 4, KEY_RO), \
+        KEY(5, 5, KEY_ZENKAKUHANKAKU), \
+}
+
+#define KEYPAD_9x9     0
+#define KEYPAD_6x6     1
+#define KEYPAD_2x2     2
+
+/**
+ * struct kbd_platform_data - spear keyboard platform data
+ * keymap: pointer to keymap data (table and size)
+ * rep: enables key autorepeat
+ * mode: choose keyboard support(9x9, 6x6, 2x2)
+ * suspended_rate: rate at which keyboard would operate in suspended mode
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement keyboards.
+ */
+struct kbd_platform_data {
+        const struct matrix_keymap_data *keymap;
+        bool rep;
+        unsigned int mode;
+        unsigned int suspended_rate;
+};
+
+#endif /* __PLAT_KEYBOARD_H */
diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h
new file mode 100644
index 000000000000..1e2f4e97f428
--- /dev/null
+++ b/include/linux/platform_data/keypad-ep93xx.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
+#define __ASM_ARCH_EP93XX_KEYPAD_H
+
+struct matrix_keymap_data;
+
+/* flags for the ep93xx_keypad driver */
+#define EP93XX_KEYPAD_DISABLE_3_KEY     (1<<0)  /* disable 3-key reset */
+#define EP93XX_KEYPAD_DIAG_MODE         (1<<1)  /* diagnostic mode */
+#define EP93XX_KEYPAD_BACK_DRIVE        (1<<2)  /* back driving mode */
+#define EP93XX_KEYPAD_TEST_MODE         (1<<3)  /* scan only column 0 */
+#define EP93XX_KEYPAD_KDIV              (1<<4)  /* 1/4 clock or 1/16 clock */
+#define EP93XX_KEYPAD_AUTOREPEAT        (1<<5)  /* enable key autorepeat */
+
+/**
+ * struct ep93xx_keypad_platform_data - platform specific device structure
+ * @keymap_data:        pointer to &matrix_keymap_data
+ * @debounce:           debounce start count; terminal count is 0xff
+ * @prescale:           row/column counter pre-scaler load value
+ * @flags:              see above
+ */
+struct ep93xx_keypad_platform_data {
+        struct matrix_keymap_data *keymap_data;
+        unsigned int    debounce;
+        unsigned int    prescale;
+        unsigned int    flags;
+};
+
+#define EP93XX_MATRIX_ROWS              (8)
+#define EP93XX_MATRIX_COLS              (8)
+
+#endif  /* __ASM_ARCH_EP93XX_KEYPAD_H */
diff --git a/include/linux/platform_data/keypad-nomadik-ske.h b/include/linux/platform_data/keypad-nomadik-ske.h
new file mode 100644
index 000000000000..31382fbc07dc
--- /dev/null
+++ b/include/linux/platform_data/keypad-nomadik-ske.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
+ *
+ * ux500 Scroll key and Keypad Encoder (SKE) header
+ */
+
+#ifndef __SKE_H
+#define __SKE_H
+
+#include <linux/input/matrix_keypad.h>
+
+/* register definitions for SKE peripheral */
+#define SKE_CR          0x00
+#define SKE_VAL0        0x04
+#define SKE_VAL1        0x08
+#define SKE_DBCR        0x0C
+#define SKE_IMSC        0x10
+#define SKE_RIS         0x14
+#define SKE_MIS         0x18
+#define SKE_ICR         0x1C
+
+/*
+ * Keypad module
+ */
+
+/**
+ * struct keypad_platform_data - structure for platform specific data
+ * @init:       pointer to keypad init function
+ * @exit:       pointer to keypad deinitialisation function
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow:       maximum number of rows
+ * @kcol:       maximum number of columns
+ * @debounce_ms: platform specific debounce time
+ * @no_autorepeat: flag for auto repetition
+ * @wakeup_enable: allow waking up the system
+ */
+struct ske_keypad_platform_data {
+        int (*init)(void);
+        int (*exit)(void);
+        const struct matrix_keymap_data *keymap_data;
+        u8 krow;
+        u8 kcol;
+        u8 debounce_ms;
+        bool no_autorepeat;
+        bool wakeup_enable;
+};
+#endif  /*__SKE_KPD_H*/
diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h
new file mode 100644
index 000000000000..a6b21eddb212
--- /dev/null
+++ b/include/linux/platform_data/keypad-omap.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/plat-omap/include/mach/keypad.h
+ *
+ *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+#ifndef CONFIG_ARCH_OMAP1
+#warning Please update the board to use matrix-keypad driver
+#define omap_readw(reg)         0
+#define omap_writew(val, reg)   do {} while (0)
+#endif
+#include <linux/input/matrix_keypad.h>
+
+struct omap_kp_platform_data {
+        int rows;
+        int cols;
+        const struct matrix_keymap_data *keymap_data;
+        bool rep;
+        unsigned long delay;
+        bool dbounce;
+        /* specific to OMAP242x*/
+        unsigned int *row_gpios;
+        unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. Two free bits, not used by neither row/col nor keynum,
+ * must be available for use as group bits. The below GROUP_SHIFT
+ * macro definition is based on some prior knowledge of the
+ * matrix_keypad defined KEY() macro internals.
+ */
+#define GROUP_SHIFT     14
+#define GROUP_0         (0 << GROUP_SHIFT)
+#define GROUP_1         (1 << GROUP_SHIFT)
+#define GROUP_2         (2 << GROUP_SHIFT)
+#define GROUP_3         (3 << GROUP_SHIFT)
+#define GROUP_MASK      GROUP_3
+#if KEY_MAX & GROUP_MASK
+#error Group bits in conflict with keynum bits
+#endif
+
+
+#endif
+
diff --git a/include/linux/platform_data/keypad-pxa27x.h b/include/linux/platform_data/keypad-pxa27x.h
new file mode 100644
index 000000000000..5ce8d5e6ea51
--- /dev/null
+++ b/include/linux/platform_data/keypad-pxa27x.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
+#define __ASM_ARCH_PXA27x_KEYPAD_H
+
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+
+#define MAX_MATRIX_KEY_ROWS     (8)
+#define MAX_MATRIX_KEY_COLS     (8)
+#define MATRIX_ROW_SHIFT        (3)
+#define MAX_DIRECT_KEY_NUM      (8)
+
+/* pxa3xx keypad platform specific parameters
+ *
+ * NOTE:
+ * 1. direct_key_num indicates the number of keys in the direct keypad
+ *    _plus_ the number of rotary-encoder sensor inputs,  this can be
+ *    left as 0 if only rotary encoders are enabled,  the driver will
+ *    automatically calculate this
+ *
+ * 2. direct_key_map is the key code map for the direct keys, if rotary
+ *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
+ *
+ * 3. rotary can be either interpreted as a relative input event (e.g.
+ *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
+ *
+ * 4. matrix key and direct key will use the same debounce_interval by
+ *    default, which should be sufficient in most cases
+ *
+ * pxa168 keypad platform specific parameter
+ *
+ * NOTE:
+ * clear_wakeup_event callback is a workaround required to clear the
+ * keypad interrupt. The keypad wake must be cleared in addition to
+ * reading the MI/DI bits in the KPC register.
+ */
+struct pxa27x_keypad_platform_data {
+
+        /* code map for the matrix keys */
+        unsigned int    matrix_key_rows;
+        unsigned int    matrix_key_cols;
+        unsigned int    *matrix_key_map;
+        int             matrix_key_map_size;
+
+        /* direct keys */
+        int             direct_key_num;
+        unsigned int    direct_key_map[MAX_DIRECT_KEY_NUM];
+        /* the key output may be low active */
+        int             direct_key_low_active;
+        /* give board a chance to choose the start direct key */
+        unsigned int    direct_key_mask;
+
+        /* rotary encoders 0 */
+        int             enable_rotary0;
+        int             rotary0_rel_code;
+        int             rotary0_up_key;
+        int             rotary0_down_key;
+
+        /* rotary encoders 1 */
+        int             enable_rotary1;
+        int             rotary1_rel_code;
+        int             rotary1_up_key;
+        int             rotary1_down_key;
+
+        /* key debounce interval */
+        unsigned int    debounce_interval;
+
+        /* clear wakeup event requirement for pxa168 */
+        void            (*clear_wakeup_event)(void);
+};
+
+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/include/linux/platform_data/keypad-w90p910.h b/include/linux/platform_data/keypad-w90p910.h
new file mode 100644
index 000000000000..556778e8ddaa
--- /dev/null
+++ b/include/linux/platform_data/keypad-w90p910.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_ARCH_W90P910_KEYPAD_H
+#define __ASM_ARCH_W90P910_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+extern void mfp_set_groupi(struct device *dev);
+
+struct w90p910_keypad_platform_data {
+        const struct matrix_keymap_data *keymap_data;
+
+        unsigned int    prescale;
+        unsigned int    debounce;
+};
+
+#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
diff --git a/include/linux/platform_data/keyscan-davinci.h b/include/linux/platform_data/keyscan-davinci.h
new file mode 100644
index 000000000000..7a560e05bda8
--- /dev/null
+++ b/include/linux/platform_data/keyscan-davinci.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DAVINCI_KEYSCAN_H
+#define DAVINCI_KEYSCAN_H
+
+#include <linux/io.h>
+
+enum davinci_matrix_types {
+        DAVINCI_KEYSCAN_MATRIX_4X4,
+        DAVINCI_KEYSCAN_MATRIX_5X3,
+};
+
+struct davinci_ks_platform_data {
+        int             (*device_enable)(struct device *dev);
+        unsigned short  *keymap;
+        u32             keymapsize;
+        u8              rep:1;
+        u8              strobe;
+        u8              interval;
+        u8              matrix_type;
+};
+
+#endif
+
diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h
new file mode 100644
index 000000000000..8e52c6572281
--- /dev/null
+++ b/include/linux/platform_data/lcd-mipid.h
@@ -0,0 +1,29 @@
+#ifndef __LCD_MIPID_H
+#define __LCD_MIPID_H
+
+enum mipid_test_num {
+        MIPID_TEST_RGB_LINES,
+};
+
+enum mipid_test_result {
+        MIPID_TEST_SUCCESS,
+        MIPID_TEST_INVALID,
+        MIPID_TEST_FAILED,
+};
+
+#ifdef __KERNEL__
+
+struct mipid_platform_data {
+        int     nreset_gpio;
+        int     data_lines;
+
+        void    (*shutdown)(struct mipid_platform_data *pdata);
+        void    (*set_bklight_level)(struct mipid_platform_data *pdata,
+                                     int level);
+        int     (*get_bklight_level)(struct mipid_platform_data *pdata);
+        int     (*get_bklight_max)(struct mipid_platform_data *pdata);
+};
+
+#endif
+
+#endif
diff --git a/include/linux/platform_data/leds-kirkwood-netxbig.h b/include/linux/platform_data/leds-kirkwood-netxbig.h
new file mode 100644
index 000000000000..24b536ebdf13
--- /dev/null
+++ b/include/linux/platform_data/leds-kirkwood-netxbig.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+ *
+ * Platform data structure for netxbig LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NETXBIG_H
+#define __MACH_LEDS_NETXBIG_H
+
+struct netxbig_gpio_ext {
+        unsigned        *addr;
+        int             num_addr;
+        unsigned        *data;
+        int             num_data;
+        unsigned        enable;
+};
+
+enum netxbig_led_mode {
+        NETXBIG_LED_OFF,
+        NETXBIG_LED_ON,
+        NETXBIG_LED_SATA,
+        NETXBIG_LED_TIMER1,
+        NETXBIG_LED_TIMER2,
+        NETXBIG_LED_MODE_NUM,
+};
+
+#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
+
+struct netxbig_led_timer {
+        unsigned long           delay_on;
+        unsigned long           delay_off;
+        enum netxbig_led_mode   mode;
+};
+
+struct netxbig_led {
+        const char      *name;
+        const char      *default_trigger;
+        int             mode_addr;
+        int             *mode_val;
+        int             bright_addr;
+};
+
+struct netxbig_led_platform_data {
+        struct netxbig_gpio_ext *gpio_ext;
+        struct netxbig_led_timer *timer;
+        int                     num_timer;
+        struct netxbig_led      *leds;
+        int                     num_leds;
+};
+
+#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/include/linux/platform_data/leds-kirkwood-ns2.h b/include/linux/platform_data/leds-kirkwood-ns2.h
new file mode 100644
index 000000000000..e21272e5f668
--- /dev/null
+++ b/include/linux/platform_data/leds-kirkwood-ns2.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+ *
+ * Platform data structure for Network Space v2 LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NS2_H
+#define __MACH_LEDS_NS2_H
+
+struct ns2_led {
+        const char      *name;
+        const char      *default_trigger;
+        unsigned        cmd;
+        unsigned        slow;
+};
+
+struct ns2_led_platform_data {
+        int             num_leds;
+        struct ns2_led  *leds;
+};
+
+#endif /* __MACH_LEDS_NS2_H */
diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h
new file mode 100644
index 000000000000..d8a7672519b6
--- /dev/null
+++ b/include/linux/platform_data/leds-s3c24xx.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - LEDs GPIO connector
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_LEDSGPIO_H
+#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
+
+#define S3C24XX_LEDF_ACTLOW     (1<<0)          /* LED is on when GPIO low */
+#define S3C24XX_LEDF_TRISTATE   (1<<1)          /* tristate to turn off */
+
+struct s3c24xx_led_platdata {
+        unsigned int             gpio;
+        unsigned int             flags;
+
+        char                    *name;
+        char                    *def_trigger;
+};
+
+#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/include/linux/platform_data/mfd-mcp-sa11x0.h b/include/linux/platform_data/mfd-mcp-sa11x0.h
new file mode 100644
index 000000000000..4b2860ae3828
--- /dev/null
+++ b/include/linux/platform_data/mfd-mcp-sa11x0.h
@@ -0,0 +1,22 @@
+/*
+ *  arch/arm/mach-sa1100/include/mach/mcp.h
+ *
+ *  Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ARCH_MCP_H
+#define __ASM_ARM_ARCH_MCP_H
+
+#include <linux/types.h>
+
+struct mcp_plat_data {
+        u32 mccr0;
+        u32 mccr1;
+        unsigned int sclk_rate;
+        void *codec_pdata;
+};
+
+#endif
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
new file mode 100644
index 000000000000..c45b1e8d4c2e
--- /dev/null
+++ b/include/linux/platform_data/mipi-csis.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series MIPI CSI slave device support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
+#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
+
+struct platform_device;
+
+/**
+ * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @alignment: data alignment in bits
+ * @hs_settle: HS-RX settle time
+ * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
+ *                 driver or true in case this regulator has no enable function
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct s5p_platform_mipi_csis {
+        unsigned long clk_rate;
+        u8 lanes;
+        u8 alignment;
+        u8 hs_settle;
+        bool fixed_phy_vdd;
+        int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/**
+ * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
+ * @pdev: MIPI-CSIS platform device
+ * @on: true to enable D-PHY and deassert its reset
+ *      false to disable D-PHY
+ */
+int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
+
+#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/include/linux/platform_data/mmc-davinci.h b/include/linux/platform_data/mmc-davinci.h
new file mode 100644
index 000000000000..5ba6b22ce338
--- /dev/null
+++ b/include/linux/platform_data/mmc-davinci.h
@@ -0,0 +1,39 @@
+/*
+ *  Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+        /* get_cd()/get_wp() may sleep */
+        int     (*get_cd)(int module);
+        int     (*get_ro)(int module);
+
+        void    (*set_power)(int module, bool on);
+
+        /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+        u8      wires;
+
+        u32     max_freq;
+
+        /* any additional host capabilities: OR'd in to mmc->f_caps */
+        u32     caps;
+
+        /* Version of the MMC/SD controller */
+        u8      version;
+
+        /* Number of sg segments */
+        u8      nr_sg;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+        MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */
+        MMC_CTLR_VERSION_2,     /* DA830 */
+};
+
+#endif
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
new file mode 100644
index 000000000000..aaf97481f413
--- /dev/null
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#ifndef __ASM_ARCH_IMX_ESDHC_H
+#define __ASM_ARCH_IMX_ESDHC_H
+
+enum wp_types {
+        ESDHC_WP_NONE,          /* no WP, neither controller nor gpio */
+        ESDHC_WP_CONTROLLER,    /* mmc controller internal WP */
+        ESDHC_WP_GPIO,          /* external gpio pin for WP */
+};
+
+enum cd_types {
+        ESDHC_CD_NONE,          /* no CD, neither controller nor gpio */
+        ESDHC_CD_CONTROLLER,    /* mmc controller internal CD */
+        ESDHC_CD_GPIO,          /* external gpio pin for CD */
+        ESDHC_CD_PERMANENT,     /* no CD, card permanently wired to host */
+};
+
+/**
+ * struct esdhc_platform_data - platform data for esdhc on i.MX
+ *
+ * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
+ *
+ * @wp_gpio:    gpio for write_protect
+ * @cd_gpio:    gpio for card_detect interrupt
+ * @wp_type:    type of write_protect method (see wp_types enum above)
+ * @cd_type:    type of card_detect method (see cd_types enum above)
+ */
+
+struct esdhc_platform_data {
+        unsigned int wp_gpio;
+        unsigned int cd_gpio;
+        enum wp_types wp_type;
+        enum cd_types cd_type;
+};
+#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/include/linux/platform_data/mmc-msm_sdcc.h b/include/linux/platform_data/mmc-msm_sdcc.h
new file mode 100644
index 000000000000..ffcd9e3a6a7e
--- /dev/null
+++ b/include/linux/platform_data/mmc-msm_sdcc.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/include/asm/mach/mmc.h
+ */
+#ifndef ASMARM_MACH_MMC_H
+#define ASMARM_MACH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+
+struct msm_mmc_gpio {
+        unsigned no;
+        const char *name;
+};
+
+struct msm_mmc_gpio_data {
+        struct msm_mmc_gpio *gpio;
+        u8 size;
+};
+
+struct msm_mmc_platform_data {
+        unsigned int ocr_mask;                  /* available voltages */
+        u32 (*translate_vdd)(struct device *, unsigned int);
+        unsigned int (*status)(struct device *);
+        int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
+        struct msm_mmc_gpio_data *gpio_data;
+        void (*init_card)(struct mmc_card *card);
+};
+
+#endif
diff --git a/include/linux/platform_data/mmc-mvsdio.h b/include/linux/platform_data/mmc-mvsdio.h
new file mode 100644
index 000000000000..1190efedcb94
--- /dev/null
+++ b/include/linux/platform_data/mmc-mvsdio.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-orion/include/plat/mvsdio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVSDIO_H
+#define __MACH_MVSDIO_H
+
+#include <linux/mbus.h>
+
+struct mvsdio_platform_data {
+        unsigned int clock;
+        int gpio_card_detect;
+        int gpio_write_protect;
+};
+
+#endif
diff --git a/include/linux/platform_data/mmc-mxcmmc.h b/include/linux/platform_data/mmc-mxcmmc.h
new file mode 100644
index 000000000000..29115f405af9
--- /dev/null
+++ b/include/linux/platform_data/mmc-mxcmmc.h
@@ -0,0 +1,39 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct device;
+
+/* board specific SDHC data, optional.
+ * If not present, a writable card with 3,3V is assumed.
+ */
+struct imxmmc_platform_data {
+        /* Return values for the get_ro callback should be:
+         *   0 for a read/write card
+         *   1 for a read-only card
+         *   -ENOSYS when not supported (equal to NULL callback)
+         *   or a negative errno value when something bad happened
+         */
+        int (*get_ro)(struct device *);
+
+        /* board specific hook to (de)initialize the SD slot.
+         * The board code can call 'handler' on a card detection
+         * change giving data as argument.
+         */
+        int (*init)(struct device *dev, irq_handler_t handler, void *data);
+        void (*exit)(struct device *dev, void *data);
+
+        /* available voltages. If not given, assume
+         * MMC_VDD_32_33 | MMC_VDD_33_34
+         */
+        unsigned int ocr_avail;
+
+        /* adjust slot voltage */
+        void (*setpower)(struct device *, unsigned int vdd);
+
+        /* enable card detect using DAT3 */
+        int dat3_card_detect;
+};
+
+#endif
diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h
new file mode 100644
index 000000000000..9eb515bb799d
--- /dev/null
+++ b/include/linux/platform_data/mmc-pxamci.h
@@ -0,0 +1,28 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+struct pxamci_platform_data {
+        unsigned int ocr_mask;                  /* available voltages */
+        unsigned long detect_delay_ms;          /* delay in millisecond before detecting cards after interrupt */
+        int (*init)(struct device *, irq_handler_t , void *);
+        int (*get_ro)(struct device *);
+        void (*setpower)(struct device *, unsigned int);
+        void (*exit)(struct device *, void *);
+        int gpio_card_detect;                   /* gpio detecting card insertion */
+        int gpio_card_ro;                       /* gpio detecting read only toggle */
+        bool gpio_card_ro_invert;               /* gpio ro is inverted */
+        int gpio_power;                         /* gpio powering up MMC bus */
+        bool gpio_power_invert;                 /* gpio power is inverted */
+};
+
+extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
+
+#endif
diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
new file mode 100644
index 000000000000..c42d31711944
--- /dev/null
+++ b/include/linux/platform_data/mmc-s3cmci.h
@@ -0,0 +1,52 @@
+#ifndef _ARCH_MCI_H
+#define _ARCH_MCI_H
+
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
+struct s3c24xx_mci_pdata {
+        unsigned int    no_wprotect:1;
+        unsigned int    no_detect:1;
+        unsigned int    wprotect_invert:1;
+        unsigned int    detect_invert:1;        /* set => detect active high */
+        unsigned int    use_dma:1;
+
+        unsigned int    gpio_detect;
+        unsigned int    gpio_wprotect;
+        unsigned long   ocr_avail;
+        void            (*set_power)(unsigned char power_mode,
+                                     unsigned short vdd);
+};
+
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
+#endif /* _ARCH_NCI_H */
diff --git a/include/linux/platform_data/mmc-sdhci-tegra.h b/include/linux/platform_data/mmc-sdhci-tegra.h
new file mode 100644
index 000000000000..8f8430697686
--- /dev/null
+++ b/include/linux/platform_data/mmc-sdhci-tegra.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2009 Palm, Inc.
+ * Author: Yvonne Yip <y@palm.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __PLATFORM_DATA_TEGRA_SDHCI_H
+#define __PLATFORM_DATA_TEGRA_SDHCI_H
+
+#include <linux/mmc/host.h>
+
+struct tegra_sdhci_platform_data {
+        int cd_gpio;
+        int wp_gpio;
+        int power_gpio;
+        int is_8bit;
+        int pm_flags;
+};
+
+#endif
diff --git a/include/linux/platform_data/mouse-pxa930_trkball.h b/include/linux/platform_data/mouse-pxa930_trkball.h
new file mode 100644
index 000000000000..5e0789bc4729
--- /dev/null
+++ b/include/linux/platform_data/mouse-pxa930_trkball.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_ARCH_PXA930_TRKBALL_H
+#define __ASM_ARCH_PXA930_TRKBALL_H
+
+struct pxa930_trkball_platform_data {
+        int x_filter;
+        int y_filter;
+};
+
+#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
+
diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h
new file mode 100644
index 000000000000..05b293443097
--- /dev/null
+++ b/include/linux/platform_data/mtd-davinci-aemif.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci AEMIF support
+ *
+ * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _MACH_DAVINCI_AEMIF_H
+#define _MACH_DAVINCI_AEMIF_H
+
+#define NRCSR_OFFSET            0x00
+#define AWCCR_OFFSET            0x04
+#define A1CR_OFFSET             0x10
+
+#define ACR_ASIZE_MASK          0x3
+#define ACR_EW_MASK             BIT(30)
+#define ACR_SS_MASK             BIT(31)
+
+/* All timings in nanoseconds */
+struct davinci_aemif_timing {
+        u8      wsetup;
+        u8      wstrobe;
+        u8      whold;
+
+        u8      rsetup;
+        u8      rstrobe;
+        u8      rhold;
+
+        u8      ta;
+};
+
+int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+                                        void __iomem *base, unsigned cs);
+#endif
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
new file mode 100644
index 000000000000..1cf555aef896
--- /dev/null
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -0,0 +1,90 @@
+/*
+ * mach-davinci/nand.h
+ *
+ * Copyright © 2006 Texas Instruments.
+ *
+ * Ported to 2.6.23 Copyright © 2008 by
+ *   Sander Huijsen <Shuijsen@optelecom-nkf.com>
+ *   Troy Kisky <troy.kisky@boundarydevices.com>
+ *   Dirk Behme <Dirk.Behme@gmail.com>
+ *
+ * --------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_NAND_H
+#define __ARCH_ARM_DAVINCI_NAND_H
+
+#include <linux/mtd/nand.h>
+
+#define NANDFCR_OFFSET          0x60
+#define NANDFSR_OFFSET          0x64
+#define NANDF1ECC_OFFSET        0x70
+
+/* 4-bit ECC syndrome registers */
+#define NAND_4BIT_ECC_LOAD_OFFSET       0xbc
+#define NAND_4BIT_ECC1_OFFSET           0xc0
+#define NAND_4BIT_ECC2_OFFSET           0xc4
+#define NAND_4BIT_ECC3_OFFSET           0xc8
+#define NAND_4BIT_ECC4_OFFSET           0xcc
+#define NAND_ERR_ADD1_OFFSET            0xd0
+#define NAND_ERR_ADD2_OFFSET            0xd4
+#define NAND_ERR_ERRVAL1_OFFSET         0xd8
+#define NAND_ERR_ERRVAL2_OFFSET         0xdc
+
+/* NOTE:  boards don't need to use these address bits
+ * for ALE/CLE unless they support booting from NAND.
+ * They're used unless platform data overrides them.
+ */
+#define MASK_ALE                0x08
+#define MASK_CLE                0x10
+
+struct davinci_nand_pdata {             /* platform_data */
+        uint32_t                mask_ale;
+        uint32_t                mask_cle;
+
+        /* for packages using two chipselects */
+        uint32_t                mask_chipsel;
+
+        /* board's default static partition info */
+        struct mtd_partition    *parts;
+        unsigned                nr_parts;
+
+        /* none  == NAND_ECC_NONE (strongly *not* advised!!)
+         * soft  == NAND_ECC_SOFT
+         * else  == NAND_ECC_HW, according to ecc_bits
+         *
+         * All DaVinci-family chips support 1-bit hardware ECC.
+         * Newer ones also support 4-bit ECC, but are awkward
+         * using it with large page chips.
+         */
+        nand_ecc_modes_t        ecc_mode;
+        u8                      ecc_bits;
+
+        /* e.g. NAND_BUSWIDTH_16 */
+        unsigned                options;
+        /* e.g. NAND_BBT_USE_FLASH */
+        unsigned                bbt_options;
+
+        /* Main and mirror bbt descriptor overrides */
+        struct nand_bbt_descr   *bbt_td;
+        struct nand_bbt_descr   *bbt_md;
+
+        /* Access timings */
+        struct davinci_aemif_timing     *timing;
+};
+
+#endif  /* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/include/linux/platform_data/mtd-mxc_nand.h b/include/linux/platform_data/mtd-mxc_nand.h
new file mode 100644
index 000000000000..6bb96ef1600b
--- /dev/null
+++ b/include/linux/platform_data/mtd-mxc_nand.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+#include <linux/mtd/partitions.h>
+
+struct mxc_nand_platform_data {
+        unsigned int width;     /* data bus width in bytes */
+        unsigned int hw_ecc:1;  /* 0 if suppress hardware ECC */
+        unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
+        struct mtd_partition *parts;    /* partition table */
+        int nr_parts;                   /* size of parts */
+};
+#endif /* __ASM_ARCH_NAND_H */
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
new file mode 100644
index 000000000000..1a68c1e5fe53
--- /dev/null
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/gpmc.h>
+#include <linux/mtd/partitions.h>
+
+enum nand_io {
+        NAND_OMAP_PREFETCH_POLLED = 0,  /* prefetch polled mode, default */
+        NAND_OMAP_POLLED,               /* polled mode, without prefetch */
+        NAND_OMAP_PREFETCH_DMA,         /* prefetch enabled sDMA mode */
+        NAND_OMAP_PREFETCH_IRQ          /* prefetch enabled irq mode */
+};
+
+struct omap_nand_platform_data {
+        int                     cs;
+        struct mtd_partition    *parts;
+        struct gpmc_timings     *gpmc_t;
+        int                     nr_parts;
+        bool                    dev_ready;
+        enum nand_io            xfer_type;
+        int                     devsize;
+        enum omap_ecc           ecc_opt;
+        struct gpmc_nand_regs   reg;
+};
+
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE    4
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+        return 0;
+}
+#endif
diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
new file mode 100644
index 000000000000..c42f39f20195
--- /dev/null
+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_timing {
+        unsigned int    tCH;  /* Enable signal hold time */
+        unsigned int    tCS;  /* Enable signal setup time */
+        unsigned int    tWH;  /* ND_nWE high duration */
+        unsigned int    tWP;  /* ND_nWE pulse time */
+        unsigned int    tRH;  /* ND_nRE high duration */
+        unsigned int    tRP;  /* ND_nRE pulse width */
+        unsigned int    tR;   /* ND_nWE high to ND_nRE low for read */
+        unsigned int    tWHR; /* ND_nWE high to ND_nRE low for status read */
+        unsigned int    tAR;  /* ND_ALE low to ND_nRE low delay */
+};
+
+struct pxa3xx_nand_cmdset {
+        uint16_t        read1;
+        uint16_t        read2;
+        uint16_t        program;
+        uint16_t        read_status;
+        uint16_t        read_id;
+        uint16_t        erase;
+        uint16_t        reset;
+        uint16_t        lock;
+        uint16_t        unlock;
+        uint16_t        lock_status;
+};
+
+struct pxa3xx_nand_flash {
+        char            *name;
+        uint32_t        chip_id;
+        unsigned int    page_per_block; /* Pages per block (PG_PER_BLK) */
+        unsigned int    page_size;      /* Page size in bytes (PAGE_SZ) */
+        unsigned int    flash_width;    /* Width of Flash memory (DWIDTH_M) */
+        unsigned int    dfc_width;      /* Width of flash controller(DWIDTH_C) */
+        unsigned int    num_blocks;     /* Number of physical blocks in Flash */
+
+        struct pxa3xx_nand_timing *timing;      /* NAND Flash timing */
+};
+
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT         (2)
+struct pxa3xx_nand_platform_data {
+
+        /* the data flash bus is shared between the Static Memory
+         * Controller and the Data Flash Controller,  the arbiter
+         * controls the ownership of the bus
+         */
+        int     enable_arbiter;
+
+        /* allow platform code to keep OBM/bootloader defined NFC config */
+        int     keep_config;
+
+        /* indicate how many chip selects will be used */
+        int     num_cs;
+
+        const struct mtd_partition              *parts[NUM_CHIP_SELECT];
+        unsigned int                            nr_parts[NUM_CHIP_SELECT];
+
+        const struct pxa3xx_nand_flash *        flash;
+        size_t                                  num_flash;
+};
+
+extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
new file mode 100644
index 000000000000..b64115fa93a4
--- /dev/null
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -0,0 +1,67 @@
+/* arch/arm/mach-s3c2410/include/mach/nand.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - NAND device controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct s3c2410_nand_set - define a set of one or more nand chips
+ * @disable_ecc:        Entirely disable ECC - Dangerous
+ * @flash_bbt:          Openmoko u-boot can create a Bad Block Table
+ *                      Setting this flag will allow the kernel to
+ *                      look for it at boot time and also skip the NAND
+ *                      scan.
+ * @options:            Default value to set into 'struct nand_chip' options.
+ * @nr_chips:           Number of chips in this set
+ * @nr_partitions:      Number of partitions pointed to by @partitions
+ * @name:               Name of set (optional)
+ * @nr_map:             Map for low-layer logical to physical chip numbers (option)
+ * @partitions:         The mtd partition list
+ *
+ * define a set of one or more nand chips registered with an unique mtd. Also
+ * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
+ * a warning at boot time.
+ */
+struct s3c2410_nand_set {
+        unsigned int            disable_ecc:1;
+        unsigned int            flash_bbt:1;
+
+        unsigned int            options;
+        int                     nr_chips;
+        int                     nr_partitions;
+        char                    *name;
+        int                     *nr_map;
+        struct mtd_partition    *partitions;
+        struct nand_ecclayout   *ecc_layout;
+};
+
+struct s3c2410_platform_nand {
+        /* timing information for controller, all times in nanoseconds */
+
+        int     tacls;  /* time for active CLE/ALE to nWE/nOE */
+        int     twrph0; /* active time for nWE/nOE */
+        int     twrph1; /* time for release CLE/ALE from nWE/nOE inactive */
+
+        unsigned int    ignore_unset_ecc:1;
+
+        int                     nr_sets;
+        struct s3c2410_nand_set *sets;
+
+        void                    (*select_chip)(struct s3c2410_nand_set *,
+                                               int chip);
+};
+
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/include/linux/platform_data/mtd-nomadik-nand.h b/include/linux/platform_data/mtd-nomadik-nand.h
new file mode 100644
index 000000000000..c3c8254c22a5
--- /dev/null
+++ b/include/linux/platform_data/mtd-nomadik-nand.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct nomadik_nand_platform_data {
+        struct mtd_partition *parts;
+        int nparts;
+        int options;
+        int (*init) (void);
+        int (*exit) (void);
+};
+
+#define NAND_IO_DATA    0x40000000
+#define NAND_IO_CMD     0x40800000
+#define NAND_IO_ADDR    0x41000000
+
+#endif                          /* __ASM_ARCH_NAND_H */
diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h
new file mode 100644
index 000000000000..2858667d2e4f
--- /dev/null
+++ b/include/linux/platform_data/mtd-onenand-omap2.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define ONENAND_SYNC_READ       (1 << 0)
+#define ONENAND_SYNC_READWRITE  (1 << 1)
+
+struct onenand_freq_info {
+        u16                     maf_id;
+        u16                     dev_id;
+        u16                     ver_id;
+};
+
+struct omap_onenand_platform_data {
+        int                     cs;
+        int                     gpio_irq;
+        struct mtd_partition    *parts;
+        int                     nr_parts;
+        int                     (*onenand_setup)(void __iomem *, int *freq_ptr);
+        int             (*get_freq)(const struct onenand_freq_info *freq_info,
+                                    bool *clk_dep);
+        int                     dma_channel;
+        u8                      flags;
+        u8                      regulator_can_sleep;
+        u8                      skip_initial_unlocking;
+};
+
+#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+        defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data      NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/include/linux/platform_data/mtd-orion_nand.h b/include/linux/platform_data/mtd-orion_nand.h
new file mode 100644
index 000000000000..9f3c180834d1
--- /dev/null
+++ b/include/linux/platform_data/mtd-orion_nand.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/plat-orion/include/plat/orion_nand.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_ORION_NAND_H
+#define __PLAT_ORION_NAND_H
+
+/*
+ * Device bus NAND private data
+ */
+struct orion_nand_data {
+        struct mtd_partition *parts;
+        int (*dev_ready)(struct mtd_info *mtd);
+        u32 nr_parts;
+        u8 ale;         /* address line number connected to ALE */
+        u8 cle;         /* address line number connected to CLE */
+        u8 width;       /* buswidth */
+        u8 chip_delay;
+};
+
+
+#endif
diff --git a/include/linux/platform_data/pcmcia-pxa2xx_viper.h b/include/linux/platform_data/pcmcia-pxa2xx_viper.h
new file mode 100644
index 000000000000..d428be4db44c
--- /dev/null
+++ b/include/linux/platform_data/pcmcia-pxa2xx_viper.h
@@ -0,0 +1,11 @@
+#ifndef __ARCOM_PCMCIA_H
+#define __ARCOM_PCMCIA_H
+
+struct arcom_pcmcia_pdata {
+        int     cd_gpio;
+        int     rdy_gpio;
+        int     pwr_gpio;
+        void    (*reset)(int state);
+};
+
+#endif
diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h
new file mode 100644
index 000000000000..30dea251b835
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-coh901.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2007-2012 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_U300_H
+#define __MACH_U300_GPIO_U300_H
+
+/**
+ * struct u300_gpio_platform - U300 GPIO platform data
+ * @ports: number of GPIO block ports
+ * @gpio_base: first GPIO number for this block (use a free range)
+ * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ * @pinctrl_device: pin control device to spawn as child
+ */
+struct u300_gpio_platform {
+        u8 ports;
+        int gpio_base;
+        int gpio_irq_base;
+        struct platform_device *pinctrl_device;
+};
+
+#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h
new file mode 100644
index 000000000000..b10eac89e2e9
--- /dev/null
+++ b/include/linux/platform_data/remoteproc-omap.h
@@ -0,0 +1,57 @@
+/*
+ * Remote Processor - omap-specific bits
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_REMOTEPROC_H
+#define _PLAT_REMOTEPROC_H
+
+struct rproc_ops;
+struct platform_device;
+
+/*
+ * struct omap_rproc_pdata - omap remoteproc's platform data
+ * @name: the remoteproc's name
+ * @oh_name: omap hwmod device
+ * @oh_name_opt: optional, secondary omap hwmod device
+ * @firmware: name of firmware file to load
+ * @mbox_name: name of omap mailbox device to use with this rproc
+ * @ops: start/stop rproc handlers
+ * @device_enable: omap-specific handler for enabling a device
+ * @device_shutdown: omap-specific handler for shutting down a device
+ */
+struct omap_rproc_pdata {
+        const char *name;
+        const char *oh_name;
+        const char *oh_name_opt;
+        const char *firmware;
+        const char *mbox_name;
+        const struct rproc_ops *ops;
+        int (*device_enable) (struct platform_device *pdev);
+        int (*device_shutdown) (struct platform_device *pdev);
+};
+
+#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
+
+void __init omap_rproc_reserve_cma(void);
+
+#else
+
+void __init omap_rproc_reserve_cma(void)
+{
+}
+
+#endif
+
+#endif /* _PLAT_REMOTEPROC_H */
diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h
new file mode 100644
index 000000000000..4adec9b154dd
--- /dev/null
+++ b/include/linux/platform_data/serial-imx.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+#define IMXUART_IRDA        (1<<1)
+
+struct imxuart_platform_data {
+        int (*init)(struct platform_device *pdev);
+        void (*exit)(struct platform_device *pdev);
+        unsigned int flags;
+        void (*irda_enable)(int enable);
+        unsigned int irda_inv_rx:1;
+        unsigned int irda_inv_tx:1;
+        unsigned short transceiver_delay;
+};
+
+#endif
diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h
new file mode 100644
index 000000000000..7af305b37868
--- /dev/null
+++ b/include/linux/platform_data/spi-davinci.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_SPI_H
+#define __ARCH_ARM_DAVINCI_SPI_H
+
+#include <mach/edma.h>
+
+#define SPI_INTERN_CS   0xFF
+
+enum {
+        SPI_VERSION_1, /* For DM355/DM365/DM6467 */
+        SPI_VERSION_2, /* For DA8xx */
+};
+
+/**
+ * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
+ *
+ * @version:    version of the SPI IP. Different DaVinci devices have slightly
+ *              varying versions of the same IP.
+ * @num_chipselect: number of chipselects supported by this SPI master
+ * @intr_line:  interrupt line used to connect the SPI IP to the ARM interrupt
+ *              controller withn the SoC. Possible values are 0 and 1.
+ * @chip_sel:   list of GPIOs which can act as chip-selects for the SPI.
+ *              SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
+ *              to populate if all chip-selects are internal.
+ * @cshold_bug: set this to true if the SPI controller on your chip requires
+ *              a write to CSHOLD bit in between transfers (like in DM355).
+ * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
+ *              device on the bus.
+ */
+struct davinci_spi_platform_data {
+        u8                      version;
+        u8                      num_chipselect;
+        u8                      intr_line;
+        u8                      *chip_sel;
+        bool                    cshold_bug;
+        enum dma_event_q        dma_event_q;
+};
+
+/**
+ * davinci_spi_config - Per-chip-select configuration for SPI slave devices
+ *
+ * @wdelay:     amount of delay between transmissions. Measured in number of
+ *              SPI module clocks.
+ * @odd_parity: polarity of parity flag at the end of transmit data stream.
+ *              0 - odd parity, 1 - even parity.
+ * @parity_enable: enable transmission of parity at end of each transmit
+ *              data stream.
+ * @io_type:    type of IO transfer. Choose between polled, interrupt and DMA.
+ * @timer_disable: disable chip-select timers (setup and hold)
+ * @c2tdelay:   chip-select setup time. Measured in number of SPI module clocks.
+ * @t2cdelay:   chip-select hold time. Measured in number of SPI module clocks.
+ * @t2edelay:   transmit data finished to SPI ENAn pin inactive time. Measured
+ *              in number of SPI clocks.
+ * @c2edelay:   chip-select active to SPI ENAn signal active time. Measured in
+ *              number of SPI clocks.
+ */
+struct davinci_spi_config {
+        u8      wdelay;
+        u8      odd_parity;
+        u8      parity_enable;
+#define SPI_IO_TYPE_INTR        0
+#define SPI_IO_TYPE_POLL        1
+#define SPI_IO_TYPE_DMA         2
+        u8      io_type;
+        u8      timer_disable;
+        u8      c2tdelay;
+        u8      t2cdelay;
+        u8      t2edelay;
+        u8      c2edelay;
+};
+
+#endif  /* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h
new file mode 100644
index 000000000000..9bb63ac13f04
--- /dev/null
+++ b/include/linux/platform_data/spi-ep93xx.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_MACH_EP93XX_SPI_H
+#define __ASM_MACH_EP93XX_SPI_H
+
+struct spi_device;
+
+/**
+ * struct ep93xx_spi_info - EP93xx specific SPI descriptor
+ * @num_chipselect: number of chip selects on this board, must be
+ *                  at least one
+ * @use_dma: use DMA for the transfers
+ */
+struct ep93xx_spi_info {
+        int     num_chipselect;
+        bool    use_dma;
+};
+
+/**
+ * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
+ * @setup: setup the chip select mechanism
+ * @cleanup: cleanup the chip select mechanism
+ * @cs_control: control the device chip select
+ */
+struct ep93xx_spi_chip_ops {
+        int     (*setup)(struct spi_device *spi);
+        void    (*cleanup)(struct spi_device *spi);
+        void    (*cs_control)(struct spi_device *spi, int value);
+};
+
+#endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h
new file mode 100644
index 000000000000..08be445e8eb8
--- /dev/null
+++ b/include/linux/platform_data/spi-imx.h
@@ -0,0 +1,27 @@
+
+#ifndef __MACH_SPI_H_
+#define __MACH_SPI_H_
+
+/*
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
+ *              pins, numbers < 0 mean internal CSPI chipselects according
+ *              to MXC_SPI_CS(). Normally you want to use gpio based chip
+ *              selects as the CSPI module tries to be intelligent about
+ *              when to assert the chipselect: The CSPI module deasserts the
+ *              chipselect once it runs out of input data. The other problem
+ *              is that it is not possible to mix between high active and low
+ *              active chipselects on one single bus using the internal
+ *              chipselects. Unfortunately Freescale decided to put some
+ *              chipselects on dedicated pins which are not usable as gpios,
+ *              so we have to support the internal chipselects.
+ * @num_chipselect: ARRAY_SIZE(chipselect)
+ */
+struct spi_imx_master {
+        int     *chipselect;
+        int     num_chipselect;
+};
+
+#define MXC_SPI_CS(no)  ((no) - 32)
+
+#endif /* __MACH_SPI_H_*/
diff --git a/include/linux/platform_data/spi-nuc900.h b/include/linux/platform_data/spi-nuc900.h
new file mode 100644
index 000000000000..2c4e0c128501
--- /dev/null
+++ b/include/linux/platform_data/spi-nuc900.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H
+
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+
+struct nuc900_spi_info {
+        unsigned int num_cs;
+        unsigned int lsb;
+        unsigned int txneg;
+        unsigned int rxneg;
+        unsigned int divider;
+        unsigned int sleep;
+        unsigned int txnum;
+        unsigned int txbitlen;
+        int bus_num;
+};
+
+struct nuc900_spi_chip {
+        unsigned char bits_per_word;
+};
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
new file mode 100644
index 000000000000..a357eb26bd25
--- /dev/null
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -0,0 +1,23 @@
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+#define OMAP2_MCSPI_REV 0
+#define OMAP3_MCSPI_REV 1
+#define OMAP4_MCSPI_REV 2
+
+#define OMAP4_MCSPI_REG_OFFSET 0x100
+
+struct omap2_mcspi_platform_config {
+        unsigned short  num_cs;
+        unsigned int regs_offset;
+};
+
+struct omap2_mcspi_dev_attr {
+        unsigned short num_chipselect;
+};
+
+struct omap2_mcspi_device_config {
+        unsigned turbo_mode:1;
+};
+
+#endif
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
new file mode 100644
index 000000000000..ceba18d23a5a
--- /dev/null
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *      Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_H
+#define __S3C64XX_PLAT_SPI_H
+
+struct platform_device;
+
+/**
+ * struct s3c64xx_spi_csinfo - ChipSelect description
+ * @fb_delay: Slave specific feedback delay.
+ *            Refer to FB_CLK_SEL register definition in SPI chapter.
+ * @line: Custom 'identity' of the CS line.
+ *
+ * This is per SPI-Slave Chipselect information.
+ * Allocate and initialize one in machine init code and make the
+ * spi_board_info.controller_data point to it.
+ */
+struct s3c64xx_spi_csinfo {
+        u8 fb_delay;
+        unsigned line;
+};
+
+/**
+ * struct s3c64xx_spi_info - SPI Controller defining structure
+ * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
+ * @num_cs: Number of CS this controller emulates.
+ * @cfg_gpio: Configure pins for this SPI controller.
+ */
+struct s3c64xx_spi_info {
+        int src_clk_nr;
+        int num_cs;
+        int (*cfg_gpio)(void);
+};
+
+/**
+ * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
+ *                              initialization code.
+ * @cfg_gpio: Pointer to gpio setup function.
+ * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
+ * @num_cs: Number of elements in the 'cs' array.
+ *
+ * Call this from machine init code for each SPI Controller that
+ * has some chips attached to it.
+ */
+extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+                                                int num_cs);
+extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+                                                int num_cs);
+extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
+                                                int num_cs);
+
+/* defined by architecture to configure gpio */
+extern int s3c64xx_spi0_cfg_gpio(void);
+extern int s3c64xx_spi1_cfg_gpio(void);
+extern int s3c64xx_spi2_cfg_gpio(void);
+
+extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
+#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h
new file mode 100644
index 000000000000..26fdb22e0fc2
--- /dev/null
+++ b/include/linux/platform_data/touchscreen-s3c2410.h
@@ -0,0 +1,25 @@
+/* arch/arm/plat-samsung/include/plat/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+struct s3c2410_ts_mach_info {
+       int             delay;
+       int             presc;
+       int             oversampling_shift;
+        void    (*cfg_gpio)(struct platform_device *dev);
+};
+
+extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+
+/* defined by architecture to configure gpio */
+extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
+
+#endif /* __ASM_ARM_TS_H */
diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h
new file mode 100644
index 000000000000..e0bc4abe69c2
--- /dev/null
+++ b/include/linux/platform_data/usb-davinci.h
@@ -0,0 +1,59 @@
+/*
+ * USB related definitions
+ *
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD       (1 << 17)
+#define CFGCHIP2_VBUSSENSE      (1 << 16)
+#define CFGCHIP2_RESET          (1 << 15)
+#define CFGCHIP2_OTGMODE        (3 << 13)
+#define CFGCHIP2_NO_OVERRIDE    (0 << 13)
+#define CFGCHIP2_FORCE_HOST     (1 << 13)
+#define CFGCHIP2_FORCE_DEVICE   (2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX  (1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX  (1 << 11)
+#define CFGCHIP2_PHYPWRDN       (1 << 10)
+#define CFGCHIP2_OTGPWRDN       (1 << 9)
+#define CFGCHIP2_DATPOL         (1 << 8)
+#define CFGCHIP2_USB1SUSPENDM   (1 << 7)
+#define CFGCHIP2_PHY_PLLON      (1 << 6)        /* override PLL suspend */
+#define CFGCHIP2_SESENDEN       (1 << 5)        /* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN       (1 << 4)        /* Vbus comparator */
+#define CFGCHIP2_REFFREQ        (0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ  (1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ  (2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ  (3 << 0)
+
+struct  da8xx_ohci_root_hub;
+
+typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
+                                     unsigned port);
+
+/* Passed as the platform data to the OHCI driver */
+struct  da8xx_ohci_root_hub {
+        /* Switch the port power on/off */
+        int     (*set_power)(unsigned port, int on);
+        /* Read the port power status */
+        int     (*get_power)(unsigned port);
+        /* Read the port over-current indicator */
+        int     (*get_oci)(unsigned port);
+        /* Over-current indicator change notification (pass NULL to disable) */
+        int     (*ocic_notify)(da8xx_ocic_handler_t handler);
+
+        /* Time from power on to power good (in 2 ms units) */
+        u8      potpgt;
+};
+
+void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
+
+#endif  /* ifndef __ASM_ARCH_USB_H */
diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h
new file mode 100644
index 000000000000..7eb9d1329671
--- /dev/null
+++ b/include/linux/platform_data/usb-ehci-mxc.h
@@ -0,0 +1,59 @@
+#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
+#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND  (1 << 23)
+#define MXC_EHCI_FORCE_FS               (1 << 24)
+#define MXC_EHCI_UTMI_8BIT              (0 << 28)
+#define MXC_EHCI_UTMI_16BIT             (1 << 28)
+#define MXC_EHCI_SERIAL                 (1 << 29)
+#define MXC_EHCI_MODE_UTMI              (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS           (1 << 30)
+#define MXC_EHCI_MODE_ULPI              (2 << 30)
+#define MXC_EHCI_MODE_SERIAL            (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI     (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI      (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI   (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI    (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK         (0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED     (1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH    (1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW      (1 << 7)
+#define MXC_EHCI_TTL_ENABLED            (1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY           (1 << 9)
+#define MXC_EHCI_IPPUE_DOWN             (1 << 10)
+#define MXC_EHCI_IPPUE_UP               (1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED         (1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD       (1 << 13)
+
+#define MXC_USBCTRL_OFFSET              0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET     0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET    0xc
+#define MXC_USBH2CTRL_OFFSET            0x14
+
+#define MX5_USBOTHER_REGS_OFFSET        0x800
+
+/* USB_PHY_CTRL_FUNC2*/
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK               0x3
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT              0
+
+struct mxc_usbh_platform_data {
+        int (*init)(struct platform_device *pdev);
+        int (*exit)(struct platform_device *pdev);
+
+        unsigned int             portsc;
+        struct usb_phy          *otg;
+};
+
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
+
diff --git a/include/linux/platform_data/usb-ehci-orion.h b/include/linux/platform_data/usb-ehci-orion.h
new file mode 100644
index 000000000000..6fc78e430420
--- /dev/null
+++ b/include/linux/platform_data/usb-ehci-orion.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/plat-orion/include/plat/ehci-orion.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_EHCI_ORION_H
+#define __PLAT_EHCI_ORION_H
+
+#include <linux/mbus.h>
+
+enum orion_ehci_phy_ver {
+        EHCI_PHY_ORION,
+        EHCI_PHY_DD,
+        EHCI_PHY_KW,
+        EHCI_PHY_NA,
+};
+
+struct orion_ehci_data {
+        enum orion_ehci_phy_ver phy_version;
+};
+
+
+#endif
diff --git a/include/linux/platform_data/usb-ehci-s5p.h b/include/linux/platform_data/usb-ehci-s5p.h
new file mode 100644
index 000000000000..5f28cae18582
--- /dev/null
+++ b/include/linux/platform_data/usb-ehci-s5p.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_EHCI_H
+#define __PLAT_SAMSUNG_EHCI_H __FILE__
+
+struct s5p_ehci_platdata {
+        int (*phy_init)(struct platform_device *pdev, int type);
+        int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
+
+#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/include/linux/platform_data/usb-exynos.h b/include/linux/platform_data/usb-exynos.h
new file mode 100644
index 000000000000..c256c595be5e
--- /dev/null
+++ b/include/linux/platform_data/usb-exynos.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *              http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACH_EXYNOS_OHCI_H
+#define __MACH_EXYNOS_OHCI_H
+
+struct exynos4_ohci_platdata {
+        int (*phy_init)(struct platform_device *pdev, int type);
+        int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
+
+#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/include/linux/platform_data/usb-imx_udc.h b/include/linux/platform_data/usb-imx_udc.h
new file mode 100644
index 000000000000..be273371f34a
--- /dev/null
+++ b/include/linux/platform_data/usb-imx_udc.h
@@ -0,0 +1,23 @@
+/*
+ *      Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MXC_USB
+#define __ASM_ARCH_MXC_USB
+
+struct imxusb_platform_data {
+        int (*init)(struct device *);
+        void (*exit)(struct device *);
+};
+
+#endif /* __ASM_ARCH_MXC_USB */
diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h
new file mode 100644
index 000000000000..4c1cc50a595a
--- /dev/null
+++ b/include/linux/platform_data/usb-musb-ux500.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+#include <linux/dmaengine.h>
+
+#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+
+struct ux500_musb_board_data {
+        void    **dma_rx_param_array;
+        void    **dma_tx_param_array;
+        u32     num_rx_channels;
+        u32     num_tx_channels;
+        bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+};
+
+void ux500_add_usb(struct device *parent, resource_size_t base,
+                   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
+#endif
diff --git a/include/linux/platform_data/usb-mx2.h b/include/linux/platform_data/usb-mx2.h
new file mode 100644
index 000000000000..22d0b596262c
--- /dev/null
+++ b/include/linux/platform_data/usb-mx2.h
@@ -0,0 +1,38 @@
+/*
+ *      Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MX21_USBH
+#define __ASM_ARCH_MX21_USBH
+
+enum mx21_usbh_xcvr {
+        /* Values below as used by hardware (HWMODE register) */
+        MX21_USBXCVR_TXDIF_RXDIF = 0,
+        MX21_USBXCVR_TXDIF_RXSE = 1,
+        MX21_USBXCVR_TXSE_RXDIF = 2,
+        MX21_USBXCVR_TXSE_RXSE = 3,
+};
+
+struct mx21_usbh_platform_data {
+        enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
+        enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
+        u16     enable_host1:1,
+                enable_host2:1,
+                enable_otg_host:1, /* enable "OTG" port (as host) */
+                host1_xcverless:1, /* traceiverless host1 port */
+                host1_txenoe:1, /* output enable host1 transmit enable */
+                otg_ext_xcvr:1, /* external tranceiver for OTG port */
+                unused:10;
+};
+
+#endif /* __ASM_ARCH_MX21_USBH */
diff --git a/include/linux/platform_data/usb-ohci-pxa27x.h b/include/linux/platform_data/usb-ohci-pxa27x.h
new file mode 100644
index 000000000000..95b6e2a6e514
--- /dev/null
+++ b/include/linux/platform_data/usb-ohci-pxa27x.h
@@ -0,0 +1,36 @@
+#ifndef ASMARM_ARCH_OHCI_H
+#define ASMARM_ARCH_OHCI_H
+
+struct device;
+
+struct pxaohci_platform_data {
+        int (*init)(struct device *);
+        void (*exit)(struct device *);
+
+        unsigned long flags;
+#define ENABLE_PORT1            (1 << 0)
+#define ENABLE_PORT2            (1 << 1)
+#define ENABLE_PORT3            (1 << 2)
+#define ENABLE_PORT_ALL         (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
+
+#define POWER_SENSE_LOW         (1 << 3)
+#define POWER_CONTROL_LOW       (1 << 4)
+#define NO_OC_PROTECTION        (1 << 5)
+#define OC_MODE_GLOBAL          (0 << 6)
+#define OC_MODE_PERPORT         (1 << 6)
+
+        int power_on_delay;     /* Power On to Power Good time - in ms
+                                 * HCD must wait for this duration before
+                                 * accessing a powered on port
+                                 */
+        int port_mode;
+#define PMM_NPS_MODE           1
+#define PMM_GLOBAL_MODE        2
+#define PMM_PERPORT_MODE       3
+
+        int power_budget;
+};
+
+extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
+
+#endif
diff --git a/include/linux/platform_data/usb-ohci-s3c2410.h b/include/linux/platform_data/usb-ohci-s3c2410.h
new file mode 100644
index 000000000000..7fa1fbefc3f2
--- /dev/null
+++ b/include/linux/platform_data/usb-ohci-s3c2410.h
@@ -0,0 +1,43 @@
+/* arch/arm/plat-samsung/include/plat/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB host port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H
+
+#define S3C_HCDFLG_USED (1)
+
+struct s3c2410_hcd_port {
+        unsigned char   flags;
+        unsigned char   power;
+        unsigned char   oc_status;
+        unsigned char   oc_changed;
+};
+
+struct s3c2410_hcd_info {
+        struct usb_hcd          *hcd;
+        struct s3c2410_hcd_port port[2];
+
+        void            (*power_control)(int port, int to);
+        void            (*enable_oc)(struct s3c2410_hcd_info *, int on);
+        void            (*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+        if (info->report_oc != NULL) {
+                (info->report_oc)(info, ports);
+        }
+}
+
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/include/linux/platform_data/usb-pxa3xx-ulpi.h b/include/linux/platform_data/usb-pxa3xx-ulpi.h
new file mode 100644
index 000000000000..9d82cb65ea56
--- /dev/null
+++ b/include/linux/platform_data/usb-pxa3xx-ulpi.h
@@ -0,0 +1,35 @@
+/*
+ * PXA3xx U2D header
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PXA310_U2D__
+#define __PXA310_U2D__
+
+#include <linux/usb/ulpi.h>
+
+struct pxa3xx_u2d_platform_data {
+
+#define ULPI_SER_6PIN   (1 << 0)
+#define ULPI_SER_3PIN   (1 << 1)
+        unsigned int ulpi_mode;
+
+        int (*init)(struct device *);
+        void (*exit)(struct device *);
+};
+
+
+/* Start PXA3xx U2D host */
+int pxa3xx_u2d_start_hc(struct usb_bus *host);
+/* Stop PXA3xx U2D host */
+void pxa3xx_u2d_stop_hc(struct usb_bus *host);
+
+extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
+
+#endif /* __PXA310_U2D__ */
diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h
new file mode 100644
index 000000000000..de8e2288a509
--- /dev/null
+++ b/include/linux/platform_data/usb-s3c2410_udc.h
@@ -0,0 +1,44 @@
+/* arch/arm/plat-samsung/include/plat/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *  Changelog:
+ *      14-Mar-2005     RTP     Created file
+ *      02-Aug-2005     RTP     File rename
+ *      07-Sep-2005     BJD     Minor cleanups, changed cmd to enum
+ *      18-Jan-2007     HMW     Add per-platform vbus_draw function
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+        S3C2410_UDC_P_ENABLE    = 1,    /* Pull-up enable        */
+        S3C2410_UDC_P_DISABLE   = 2,    /* Pull-up disable       */
+        S3C2410_UDC_P_RESET     = 3,    /* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+        void    (*udc_command)(enum s3c2410_udc_cmd_e);
+        void    (*vbus_draw)(unsigned int ma);
+
+        unsigned int pullup_pin;
+        unsigned int pullup_pin_inverted;
+
+        unsigned int vbus_pin;
+        unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+struct s3c24xx_hsudc_platdata;
+
+extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/include/linux/platform_data/video-ep93xx.h b/include/linux/platform_data/video-ep93xx.h
new file mode 100644
index 000000000000..d5ae11d7c453
--- /dev/null
+++ b/include/linux/platform_data/video-ep93xx.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/fb.h
+ */
+
+#ifndef __ASM_ARCH_EP93XXFB_H
+#define __ASM_ARCH_EP93XXFB_H
+
+struct platform_device;
+struct fb_videomode;
+struct fb_info;
+
+#define EP93XXFB_USE_MODEDB             0
+
+/* VideoAttributes flags */
+#define EP93XXFB_STATE_MACHINE_ENABLE   (1 << 0)
+#define EP93XXFB_PIXEL_CLOCK_ENABLE     (1 << 1)
+#define EP93XXFB_VSYNC_ENABLE           (1 << 2)
+#define EP93XXFB_PIXEL_DATA_ENABLE      (1 << 3)
+#define EP93XXFB_COMPOSITE_SYNC         (1 << 4)
+#define EP93XXFB_SYNC_VERT_HIGH         (1 << 5)
+#define EP93XXFB_SYNC_HORIZ_HIGH        (1 << 6)
+#define EP93XXFB_SYNC_BLANK_HIGH        (1 << 7)
+#define EP93XXFB_PCLK_FALLING           (1 << 8)
+#define EP93XXFB_ENABLE_AC              (1 << 9)
+#define EP93XXFB_ENABLE_LCD             (1 << 10)
+#define EP93XXFB_ENABLE_CCIR            (1 << 12)
+#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13)
+#define EP93XXFB_ENABLE_INTERRUPT       (1 << 14)
+#define EP93XXFB_USB_INTERLACE          (1 << 16)
+#define EP93XXFB_USE_EQUALIZATION       (1 << 17)
+#define EP93XXFB_USE_DOUBLE_HORZ        (1 << 18)
+#define EP93XXFB_USE_DOUBLE_VERT        (1 << 19)
+#define EP93XXFB_USE_BLANK_PIXEL        (1 << 20)
+#define EP93XXFB_USE_SDCSN0             (0 << 21)
+#define EP93XXFB_USE_SDCSN1             (1 << 21)
+#define EP93XXFB_USE_SDCSN2             (2 << 21)
+#define EP93XXFB_USE_SDCSN3             (3 << 21)
+
+#define EP93XXFB_ENABLE                 (EP93XXFB_STATE_MACHINE_ENABLE  | \
+                                         EP93XXFB_PIXEL_CLOCK_ENABLE    | \
+                                         EP93XXFB_VSYNC_ENABLE          | \
+                                         EP93XXFB_PIXEL_DATA_ENABLE)
+
+struct ep93xxfb_mach_info {
+        unsigned int                    num_modes;
+        const struct fb_videomode       *modes;
+        const struct fb_videomode       *default_mode;
+        int                             bpp;
+        unsigned int                    flags;
+
+        int     (*setup)(struct platform_device *pdev);
+        void    (*teardown)(struct platform_device *pdev);
+        void    (*blank)(int blank_mode, struct fb_info *info);
+};
+
+#endif /* __ASM_ARCH_EP93XXFB_H */
diff --git a/include/linux/platform_data/video-imxfb.h b/include/linux/platform_data/video-imxfb.h
new file mode 100644
index 000000000000..9de8f062ad5d
--- /dev/null
+++ b/include/linux/platform_data/video-imxfb.h
@@ -0,0 +1,84 @@
+/*
+ * This structure describes the machine which we are running on.
+ */
+#ifndef __MACH_IMXFB_H__
+#define __MACH_IMXFB_H__
+
+#include <linux/fb.h>
+
+#define PCR_TFT         (1 << 31)
+#define PCR_COLOR       (1 << 30)
+#define PCR_PBSIZ_1     (0 << 28)
+#define PCR_PBSIZ_2     (1 << 28)
+#define PCR_PBSIZ_4     (2 << 28)
+#define PCR_PBSIZ_8     (3 << 28)
+#define PCR_BPIX_1      (0 << 25)
+#define PCR_BPIX_2      (1 << 25)
+#define PCR_BPIX_4      (2 << 25)
+#define PCR_BPIX_8      (3 << 25)
+#define PCR_BPIX_12     (4 << 25)
+#define PCR_BPIX_16     (5 << 25)
+#define PCR_BPIX_18     (6 << 25)
+#define PCR_PIXPOL      (1 << 24)
+#define PCR_FLMPOL      (1 << 23)
+#define PCR_LPPOL       (1 << 22)
+#define PCR_CLKPOL      (1 << 21)
+#define PCR_OEPOL       (1 << 20)
+#define PCR_SCLKIDLE    (1 << 19)
+#define PCR_END_SEL     (1 << 18)
+#define PCR_END_BYTE_SWAP (1 << 17)
+#define PCR_REV_VS      (1 << 16)
+#define PCR_ACD_SEL     (1 << 15)
+#define PCR_ACD(x)      (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL    (1 << 7)
+#define PCR_SHARP       (1 << 6)
+#define PCR_PCD(x)      ((x) & 0x3f)
+
+#define PWMR_CLS(x)     (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK      (1 << 15)
+#define PWMR_SCR1       (1 << 10)
+#define PWMR_SCR0       (1 << 9)
+#define PWMR_CC_EN      (1 << 8)
+#define PWMR_PW(x)      ((x) & 0xff)
+
+#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x)            (((x) & 0xf))
+
+#define DMACR_BURST     (1 << 31)
+#define DMACR_HM(x)     (((x) & 0xf) << 16)
+#define DMACR_TM(x)     ((x) & 0xf)
+
+struct imx_fb_videomode {
+        struct fb_videomode mode;
+        u32 pcr;
+        unsigned char   bpp;
+};
+
+struct imx_fb_platform_data {
+        struct imx_fb_videomode *mode;
+        int             num_modes;
+
+        u_int           cmap_greyscale:1,
+                        cmap_inverse:1,
+                        cmap_static:1,
+                        unused:29;
+
+        u_int           pwmr;
+        u_int           lscr1;
+        u_int           dmacr;
+
+        u_char * fixed_screen_cpu;
+        dma_addr_t fixed_screen_dma;
+
+        int (*init)(struct platform_device *);
+        void (*exit)(struct platform_device *);
+
+        void (*lcd_power)(int);
+        void (*backlight_power)(int);
+};
+
+void set_imx_fb_info(struct imx_fb_platform_data *);
+#endif /* ifndef __MACH_IMXFB_H__ */
diff --git a/include/linux/platform_data/video-msm_fb.h b/include/linux/platform_data/video-msm_fb.h
new file mode 100644
index 000000000000..1f4fc81b3d8f
--- /dev/null
+++ b/include/linux/platform_data/video-msm_fb.h
@@ -0,0 +1,147 @@
+/* arch/arm/mach-msm/include/mach/msm_fb.h
+ *
+ * Internal shared definitions for various MSM framebuffer parts.
+ *
+ * Copyright (C) 2007 Google Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MSM_FB_H_
+#define _MSM_FB_H_
+
+#include <linux/device.h>
+
+struct mddi_info;
+
+struct msm_fb_data {
+        int xres;       /* x resolution in pixels */
+        int yres;       /* y resolution in pixels */
+        int width;      /* disply width in mm */
+        int height;     /* display height in mm */
+        unsigned output_format;
+};
+
+struct msmfb_callback {
+        void (*func)(struct msmfb_callback *);
+};
+
+enum {
+        MSM_MDDI_PMDH_INTERFACE,
+        MSM_MDDI_EMDH_INTERFACE,
+        MSM_EBI2_INTERFACE,
+};
+
+#define MSMFB_CAP_PARTIAL_UPDATES       (1 << 0)
+
+struct msm_panel_data {
+        /* turns off the fb memory */
+        int (*suspend)(struct msm_panel_data *);
+        /* turns on the fb memory */
+        int (*resume)(struct msm_panel_data *);
+        /* turns off the panel */
+        int (*blank)(struct msm_panel_data *);
+        /* turns on the panel */
+        int (*unblank)(struct msm_panel_data *);
+        void (*wait_vsync)(struct msm_panel_data *);
+        void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
+        void (*clear_vsync)(struct msm_panel_data *);
+        /* from the enum above */
+        unsigned interface_type;
+        /* data to be passed to the fb driver */
+        struct msm_fb_data *fb_data;
+
+        /* capabilities supported by the panel */
+        uint32_t caps;
+};
+
+struct msm_mddi_client_data {
+        void (*suspend)(struct msm_mddi_client_data *);
+        void (*resume)(struct msm_mddi_client_data *);
+        void (*activate_link)(struct msm_mddi_client_data *);
+        void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
+                             uint32_t reg);
+        uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
+        void (*auto_hibernate)(struct msm_mddi_client_data *, int);
+        /* custom data that needs to be passed from the board file to a 
+         * particular client */
+        void *private_client_data;
+        struct resource *fb_resource;
+        /* from the list above */
+        unsigned interface_type;
+};
+
+struct msm_mddi_platform_data {
+        unsigned int clk_rate;
+        void (*power_client)(struct msm_mddi_client_data *, int on);
+
+        /* fixup the mfr name, product id */
+        void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
+
+        struct resource *fb_resource; /*optional*/
+        /* number of clients in the list that follows */
+        int num_clients;
+        /* array of client information of clients */
+        struct {
+                unsigned product_id; /* mfr id in top 16 bits, product id
+                                      * in lower 16 bits
+                                      */
+                char *name;     /* the device name will be the platform
+                                 * device name registered for the client,
+                                 * it should match the name of the associated
+                                 * driver
+                                 */
+                unsigned id;    /* id for mddi client device node, will also
+                                 * be used as device id of panel devices, if
+                                 * the client device will have multiple panels
+                                 * space must be left here for them
+                                 */
+                void *client_data;      /* required private client data */
+                unsigned int clk_rate;  /* optional: if the client requires a
+                                        * different mddi clk rate
+                                        */
+        } client_platform_data[];
+};
+
+struct mdp_blit_req;
+struct fb_info;
+struct mdp_device {
+        struct device dev;
+        void (*dma)(struct mdp_device *mpd, uint32_t addr,
+                    uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
+                    uint32_t y, struct msmfb_callback *callback, int interface);
+        void (*dma_wait)(struct mdp_device *mdp);
+        int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
+                    struct mdp_blit_req *req);
+        void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
+};
+
+struct class_interface;
+int register_mdp_client(struct class_interface *class_intf);
+
+/**** private client data structs go below this line ***/
+
+struct msm_mddi_bridge_platform_data {
+        /* from board file */
+        int (*init)(struct msm_mddi_bridge_platform_data *,
+                    struct msm_mddi_client_data *);
+        int (*uninit)(struct msm_mddi_bridge_platform_data *,
+                      struct msm_mddi_client_data *);
+        /* passed to panel for use by the fb driver */
+        int (*blank)(struct msm_mddi_bridge_platform_data *,
+                     struct msm_mddi_client_data *);
+        int (*unblank)(struct msm_mddi_bridge_platform_data *,
+                       struct msm_mddi_client_data *);
+        struct msm_fb_data fb_data;
+};
+
+
+
+#endif
diff --git a/include/linux/platform_data/video-mx3fb.h b/include/linux/platform_data/video-mx3fb.h
new file mode 100644
index 000000000000..fdbe60001542
--- /dev/null
+++ b/include/linux/platform_data/video-mx3fb.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MX3FB_H__
+#define __ASM_ARCH_MX3FB_H__
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_OE_ACT_HIGH     0x80000000
+#define FB_SYNC_CLK_INVERT      0x40000000
+#define FB_SYNC_DATA_INVERT     0x20000000
+#define FB_SYNC_CLK_IDLE_EN     0x10000000
+#define FB_SYNC_SHARP_MODE      0x08000000
+#define FB_SYNC_SWAP_RGB        0x04000000
+#define FB_SYNC_CLK_SEL_EN      0x02000000
+
+/*
+ * Specify the way your display is connected. The IPU can arbitrarily
+ * map the internal colors to the external data lines. We only support
+ * the following mappings at the moment.
+ */
+enum disp_data_mapping {
+        /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
+        IPU_DISP_DATA_MAPPING_RGB666,
+        /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
+        IPU_DISP_DATA_MAPPING_RGB565,
+        /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
+        IPU_DISP_DATA_MAPPING_RGB888,
+};
+
+/**
+ * struct mx3fb_platform_data - mx3fb platform data
+ *
+ * @dma_dev:    pointer to the dma-device, used for dma-slave connection
+ * @mode:       pointer to a platform-provided per mxc_register_fb() videomode
+ */
+struct mx3fb_platform_data {
+        struct device                   *dma_dev;
+        const char                      *name;
+        const struct fb_videomode       *mode;
+        int                             num_modes;
+        enum disp_data_mapping          disp_data_fmt;
+};
+
+#endif
diff --git a/include/linux/platform_data/video-nuc900fb.h b/include/linux/platform_data/video-nuc900fb.h
new file mode 100644
index 000000000000..cec5ece765ed
--- /dev/null
+++ b/include/linux/platform_data/video-nuc900fb.h
@@ -0,0 +1,83 @@
+/* linux/include/asm/arch-nuc900/fb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Changelog:
+ *
+ *   2008/08/26     vincen.zswan modify this file for LCD.
+ */
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+
+
+/* LCD Controller Hardware Desc */
+struct nuc900fb_hw {
+        unsigned int lcd_dccs;
+        unsigned int lcd_device_ctrl;
+        unsigned int lcd_mpulcd_cmd;
+        unsigned int lcd_int_cs;
+        unsigned int lcd_crtc_size;
+        unsigned int lcd_crtc_dend;
+        unsigned int lcd_crtc_hr;
+        unsigned int lcd_crtc_hsync;
+        unsigned int lcd_crtc_vr;
+        unsigned int lcd_va_baddr0;
+        unsigned int lcd_va_baddr1;
+        unsigned int lcd_va_fbctrl;
+        unsigned int lcd_va_scale;
+        unsigned int lcd_va_test;
+        unsigned int lcd_va_win;
+        unsigned int lcd_va_stuff;
+};
+
+/* LCD Display Description */
+struct nuc900fb_display {
+        /* LCD Image type */
+        unsigned type;
+
+        /* LCD Screen Size */
+        unsigned short width;
+        unsigned short height;
+
+        /* LCD Screen Info */
+        unsigned short xres;
+        unsigned short yres;
+        unsigned short bpp;
+
+        unsigned long pixclock;
+        unsigned short left_margin;
+        unsigned short right_margin;
+        unsigned short hsync_len;
+        unsigned short upper_margin;
+        unsigned short lower_margin;
+        unsigned short vsync_len;
+
+        /* hardware special register value */
+        unsigned int dccs;
+        unsigned int devctl;
+        unsigned int fbctrl;
+        unsigned int scale;
+};
+
+struct nuc900fb_mach_info {
+        struct nuc900fb_display *displays;
+        unsigned num_displays;
+        unsigned default_display;
+        /* GPIO Setting  Info */
+        unsigned gpio_dir;
+        unsigned gpio_dir_mask;
+        unsigned gpio_data;
+        unsigned gpio_data_mask;
+};
+
+extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h
new file mode 100644
index 000000000000..486b4c519ae2
--- /dev/null
+++ b/include/linux/platform_data/video-pxafb.h
@@ -0,0 +1,175 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ *  Support for the xscale frame buffer.
+ *
+ *  Author:     Jean-Frederic Clere
+ *  Created:    Sep 22, 2003
+ *  Copyright:  jfclere@sinix.net
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ *   STN  - for passive matrix
+ *   DSTN - for dual scan passive matrix
+ *   TFT  - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit     18 : for output enable polarity
+ * bit     19 : for pixel clock edge
+ * bit     20 : for output pixel format when base is RGBT16
+ */
+#define LCD_CONN_TYPE(_x)       ((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x)      (((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_MASK           0xf
+#define LCD_TYPE_UNKNOWN        0
+#define LCD_TYPE_MONO_STN       1
+#define LCD_TYPE_MONO_DSTN      2
+#define LCD_TYPE_COLOR_STN      3
+#define LCD_TYPE_COLOR_DSTN     4
+#define LCD_TYPE_COLOR_TFT      5
+#define LCD_TYPE_SMART_PANEL    6
+#define LCD_TYPE_MAX            7
+
+#define LCD_MONO_STN_4BPP       ((4  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP       ((8  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP      ((8  << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP      ((8  << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP    ((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_8BPP      ((8  << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_16BPP     ((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP     ((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP    ((8  << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP   ((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP   ((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x)     (((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH    (0 << 18)
+#define LCD_BIAS_ACTIVE_LOW     (1 << 18)
+#define LCD_PCLK_EDGE_RISE      (0 << 19)
+#define LCD_PCLK_EDGE_FALL      (1 << 19)
+#define LCD_ALTERNATE_MAPPING   (1 << 20)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+        u_long          pixclock;
+
+        u_short         xres;
+        u_short         yres;
+
+        u_char          bpp;
+        u_int           cmap_greyscale:1,
+                        depth:8,
+                        transparency:1,
+                        unused:22;
+
+        /* Parallel Mode Timing */
+        u_char          hsync_len;
+        u_char          left_margin;
+        u_char          right_margin;
+
+        u_char          vsync_len;
+        u_char          upper_margin;
+        u_char          lower_margin;
+        u_char          sync;
+
+        /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+         * Note:
+         * 1. all parameters in nanosecond (ns)
+         * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+         *    in pxa27x and pxa3xx, initialize them to the same value or
+         *    the larger one will be used
+         * 3. same to {rd,wr}_pulse_width
+         *
+         * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
+         * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
+         * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
+         */
+        unsigned        a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+        unsigned        a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+        unsigned        wr_pulse_width; /* L_PCLK_WR pulse width */
+        unsigned        rd_pulse_width; /* L_FCLK_RD pulse width */
+        unsigned        cmd_inh_time;   /* Command Inhibit time between two writes */
+        unsigned        op_hold_time;   /* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+        struct pxafb_mode_info *modes;
+        unsigned int num_modes;
+
+        unsigned int    lcd_conn;
+        unsigned long   video_mem_size;
+
+        u_int           fixed_modes:1,
+                        cmap_inverse:1,
+                        cmap_static:1,
+                        acceleration_enabled:1,
+                        unused:28;
+
+        /* The following should be defined in LCCR0
+         *      LCCR0_Act or LCCR0_Pas          Active or Passive
+         *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
+         *      LCCR0_Mono or LCCR0_Color       Mono/Color
+         *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+         *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
+         *
+         * The following should not be defined in LCCR0:
+         *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+         *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+         */
+        u_int           lccr0;
+        /* The following should be defined in LCCR3
+         *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
+         *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+         *      LCCR3_Acb(X)                    AB Bias pin frequency
+         *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
+         *
+         * The following should not be defined in LCCR3
+         *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+         */
+        u_int           lccr3;
+        /* The following should be defined in LCCR4
+         *      LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+         *
+         * All other bits in LCCR4 should be left alone.
+         */
+        u_int           lccr4;
+        void (*pxafb_backlight_power)(int);
+        void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+        void (*smart_update)(struct fb_info *);
+};
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+#ifdef CONFIG_FB_PXA_SMARTPANEL
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
+#else
+static inline int pxafb_smart_queue(struct fb_info *info,
+                                    uint16_t *cmds, int n)
+{
+        return 0;
+}
+
+static inline int pxafb_smart_flush(struct fb_info *info)
+{
+        return 0;
+}
+#endif
diff --git a/include/linux/platform_data/video-vt8500lcdfb.h b/include/linux/platform_data/video-vt8500lcdfb.h
new file mode 100644
index 000000000000..7f399c370fe0
--- /dev/null
+++ b/include/linux/platform_data/video-vt8500lcdfb.h
@@ -0,0 +1,31 @@
+/*
+ *  VT8500/WM8505 Frame Buffer platform data definitions
+ *
+ *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _VT8500FB_H
+#define _VT8500FB_H
+
+#include <linux/fb.h>
+
+struct vt8500fb_platform_data {
+        struct fb_videomode     mode;
+        u32                     xres_virtual;
+        u32                     yres_virtual;
+        u32                     bpp;
+        unsigned long           video_mem_phys;
+        void                    *video_mem_virt;
+        unsigned long           video_mem_len;
+};
+
+#endif /* _VT8500FB_H */
diff --git a/include/linux/platform_data/voltage-omap.h b/include/linux/platform_data/voltage-omap.h
new file mode 100644
index 000000000000..5be4d5def427
--- /dev/null
+++ b/include/linux/platform_data/voltage-omap.h
@@ -0,0 +1,39 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Copyright (C) 2011, Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
+#define __ARCH_ARM_OMAP_VOLTAGE_H
+
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal:    The possible voltage value in uV
+ * @sr_efuse_offs:      The offset of the efuse register(from system
+ *                      control module base address) from where to read
+ *                      the n-target value for the smartreflex module.
+ * @sr_errminlimit:     Error min limit value for smartreflex. This value
+ *                      differs at differnet opp and thus is linked
+ *                      with voltage.
+ * @vp_errorgain:       Error gain value for the voltage processor. This
+ *                      field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+        u32     volt_nominal;
+        u32     sr_efuse_offs;
+        u8      sr_errminlimit;
+        u8      vp_errgain;
+};
+struct voltagedomain;
+
+struct voltagedomain *voltdm_lookup(const char *name);
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+                unsigned long volt);
+#endif