1 files changed, 58 insertions, 4 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index a8d71ed43a0e..da8ea2e19273 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -160,6 +160,11 @@
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
  *      partial scan results may be available
  *
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ *      or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ *      NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
  *      has been changed and provides details of the request information
  *      that caused the change such as who initiated the regulatory request
@@ -341,6 +346,13 @@ enum nl80211_commands {
 
         NL80211_CMD_SET_WIPHY_NETNS,
 
+        NL80211_CMD_GET_SURVEY,
+        NL80211_CMD_NEW_SURVEY_RESULTS,
+
+        NL80211_CMD_SET_PMKSA,
+        NL80211_CMD_DEL_PMKSA,
+        NL80211_CMD_FLUSH_PMKSA,
+
         /* add new commands above here */
 
         /* used to define NL80211_CMD_MAX below */
@@ -584,6 +596,16 @@ enum nl80211_commands {
  *      changed then the list changed and the dump should be repeated
  *      completely from scratch.
  *
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
+ *
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
+ *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
+ *      containing info as possible, see &enum survey_info.
+ *
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
+ *      cache, a wiphy attribute.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -714,6 +736,13 @@ enum nl80211_attrs {
 
         NL80211_ATTR_PID,
 
+        NL80211_ATTR_4ADDR,
+
+        NL80211_ATTR_SURVEY_INFO,
+
+        NL80211_ATTR_PMKID,
+        NL80211_ATTR_MAX_NUM_PMKIDS,
+
         /* add attributes here, update the policy in nl80211.c */
 
         __NL80211_ATTR_AFTER_LAST,
@@ -895,14 +924,14 @@ enum nl80211_sta_info {
  *
  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
  * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
  * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
  * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
  */
 enum nl80211_mpath_flags {
         NL80211_MPATH_FLAG_ACTIVE =     1<<0,
         NL80211_MPATH_FLAG_RESOLVING =  1<<1,
-        NL80211_MPATH_FLAG_DSN_VALID =  1<<2,
+        NL80211_MPATH_FLAG_SN_VALID =   1<<2,
         NL80211_MPATH_FLAG_FIXED =      1<<3,
         NL80211_MPATH_FLAG_RESOLVED =   1<<4,
 };
@@ -915,7 +944,7 @@ enum nl80211_mpath_flags {
  *
  * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_ATTR_MPATH_DSN: destination sequence number
+ * @NL80211_ATTR_MPATH_SN: destination sequence number
  * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
  * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
  * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
@@ -926,7 +955,7 @@ enum nl80211_mpath_flags {
 enum nl80211_mpath_info {
         __NL80211_MPATH_INFO_INVALID,
         NL80211_MPATH_INFO_FRAME_QLEN,
-        NL80211_MPATH_INFO_DSN,
+        NL80211_MPATH_INFO_SN,
         NL80211_MPATH_INFO_METRIC,
         NL80211_MPATH_INFO_EXPTIME,
         NL80211_MPATH_INFO_FLAGS,
@@ -1117,6 +1146,26 @@ enum nl80211_reg_rule_flags {
 };
 
 /**
+ * enum nl80211_survey_info - survey information
+ *
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
+ * when getting information about a survey.
+ *
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ */
+enum nl80211_survey_info {
+        __NL80211_SURVEY_INFO_INVALID,
+        NL80211_SURVEY_INFO_FREQUENCY,
+        NL80211_SURVEY_INFO_NOISE,
+
+        /* keep last */
+        __NL80211_SURVEY_INFO_AFTER_LAST,
+        NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_mntr_flags - monitor configuration flags
  *
  * Monitor configuration flags.
@@ -1196,6 +1245,8 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
  * that it takes for an HWMP information element to propagate across the mesh
  *
+ * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
@@ -1215,6 +1266,7 @@ enum nl80211_meshconf_params {
         NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
         NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
         NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+        NL80211_MESHCONF_HWMP_ROOTMODE,
 
         /* keep last */
         __NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -1277,6 +1329,7 @@ enum nl80211_channel_type {
  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
  *      in unspecified units, scaled to 0..100 (u8)
  * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -1291,6 +1344,7 @@ enum nl80211_bss {
         NL80211_BSS_SIGNAL_MBM,
         NL80211_BSS_SIGNAL_UNSPEC,
         NL80211_BSS_STATUS,
+        NL80211_BSS_SEEN_MS_AGO,
 
         /* keep last */
         __NL80211_BSS_AFTER_LAST,