1 files changed, 220 insertions, 3 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 9bad65400fba..e86ed59f9ad5 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -3,7 +3,26 @@
 /*
  * 802.11 netlink interface public header
  *
- * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006, 2007, 2008 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
+ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
  */
 
 /**
@@ -25,8 +44,10 @@
  *
  * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
  *      to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and
- *      %NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ *      %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ *      %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
+ *      %NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *      or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *      %NL80211_ATTR_WIPHY_NAME.
@@ -106,6 +127,12 @@
  *      to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
  *      store this as a valid request and then query userspace for it.
  *
+ * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
+ *      interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
+ *      interface identified by %NL80211_ATTR_IFINDEX
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -148,6 +175,9 @@ enum nl80211_commands {
         NL80211_CMD_SET_REG,
         NL80211_CMD_REQ_SET_REG,
 
+        NL80211_CMD_GET_MESH_PARAMS,
+        NL80211_CMD_SET_MESH_PARAMS,
+
         /* add new commands above here */
 
         /* used to define NL80211_CMD_MAX below */
@@ -169,6 +199,15 @@ enum nl80211_commands {
  * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
  *      /sys/class/ieee80211/<phyname>/index
  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
+ *      if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ *      NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ *              this attribute)
+ *      NL80211_CHAN_HT20 = HT20 only
+ *      NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ *      NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
@@ -234,6 +273,9 @@ enum nl80211_commands {
  *      (u8, 0 or 1)
  * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
  *      (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ *      rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ *      restriction (at most %NL80211_MAX_SUPP_RATES).
  *
  * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
  *      association request when used with NL80211_CMD_NEW_STATION)
@@ -296,6 +338,14 @@ enum nl80211_attrs {
         NL80211_ATTR_REG_ALPHA2,
         NL80211_ATTR_REG_RULES,
 
+        NL80211_ATTR_MESH_PARAMS,
+
+        NL80211_ATTR_BSS_BASIC_RATES,
+
+        NL80211_ATTR_WIPHY_TXQ_PARAMS,
+        NL80211_ATTR_WIPHY_FREQ,
+        NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+
         /* add attributes here, update the policy in nl80211.c */
 
         __NL80211_ATTR_AFTER_LAST,
@@ -307,6 +357,10 @@ enum nl80211_attrs {
  * here
  */
 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
 
 #define NL80211_MAX_SUPP_RATES                  32
 #define NL80211_MAX_SUPP_REG_RULES              32
@@ -371,6 +425,32 @@ enum nl80211_sta_flags {
 };
 
 /**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+        __NL80211_RATE_INFO_INVALID,
+        NL80211_RATE_INFO_BITRATE,
+        NL80211_RATE_INFO_MCS,
+        NL80211_RATE_INFO_40_MHZ_WIDTH,
+        NL80211_RATE_INFO_SHORT_GI,
+
+        /* keep last */
+        __NL80211_RATE_INFO_AFTER_LAST,
+        NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_sta_info - station information
  *
  * These attribute types are used with %NL80211_ATTR_STA_INFO
@@ -382,6 +462,9 @@ enum nl80211_sta_flags {
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ *      containing info as possible, see &enum nl80211_sta_info_txrate.
  */
 enum nl80211_sta_info {
         __NL80211_STA_INFO_INVALID,
@@ -391,6 +474,8 @@ enum nl80211_sta_info {
         NL80211_STA_INFO_LLID,
         NL80211_STA_INFO_PLID,
         NL80211_STA_INFO_PLINK_STATE,
+        NL80211_STA_INFO_SIGNAL,
+        NL80211_STA_INFO_TX_BITRATE,
 
         /* keep last */
         __NL80211_STA_INFO_AFTER_LAST,
@@ -452,17 +537,29 @@ enum nl80211_mpath_info {
  *      an array of nested frequency attributes
  * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
  *      an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ *      defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
  */
 enum nl80211_band_attr {
         __NL80211_BAND_ATTR_INVALID,
         NL80211_BAND_ATTR_FREQS,
         NL80211_BAND_ATTR_RATES,
 
+        NL80211_BAND_ATTR_HT_MCS_SET,
+        NL80211_BAND_ATTR_HT_CAPA,
+        NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+        NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
         /* keep last */
         __NL80211_BAND_ATTR_AFTER_LAST,
         NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
 };
 
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
 /**
  * enum nl80211_frequency_attr - frequency attributes
  * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
@@ -474,6 +571,8 @@ enum nl80211_band_attr {
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
  *      on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ *      (100 * dBm).
  */
 enum nl80211_frequency_attr {
         __NL80211_FREQUENCY_ATTR_INVALID,
@@ -482,12 +581,15 @@ enum nl80211_frequency_attr {
         NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
         NL80211_FREQUENCY_ATTR_NO_IBSS,
         NL80211_FREQUENCY_ATTR_RADAR,
+        NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
 
         /* keep last */
         __NL80211_FREQUENCY_ATTR_AFTER_LAST,
         NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
 };
 
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
  * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
@@ -594,4 +696,119 @@ enum nl80211_mntr_flags {
         NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ * millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
+ * millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ * millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ * on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ * open retries that can be sent to establish a new peer link instance in a
+ * mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ * point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
+ * open peer links when we detect compatible mesh peers.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ * containing a PREQ that an MP can send to a particular destination (path
+ * target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ * (in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ * until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ * points receiving a PREQ shall consider the forwarding information from the
+ * root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which an MP can send only one action frame containing a PREQ
+ * reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ * that it takes for an HWMP information element to propagate across the mesh
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+        __NL80211_MESHCONF_INVALID,
+        NL80211_MESHCONF_RETRY_TIMEOUT,
+        NL80211_MESHCONF_CONFIRM_TIMEOUT,
+        NL80211_MESHCONF_HOLDING_TIMEOUT,
+        NL80211_MESHCONF_MAX_PEER_LINKS,
+        NL80211_MESHCONF_MAX_RETRIES,
+        NL80211_MESHCONF_TTL,
+        NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+        NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+        NL80211_MESHCONF_PATH_REFRESH_TIME,
+        NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+        NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+        NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+        NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+
+        /* keep last */
+        __NL80211_MESHCONF_ATTR_AFTER_LAST,
+        NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ *      disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ *      2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ *      2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+        __NL80211_TXQ_ATTR_INVALID,
+        NL80211_TXQ_ATTR_QUEUE,
+        NL80211_TXQ_ATTR_TXOP,
+        NL80211_TXQ_ATTR_CWMIN,
+        NL80211_TXQ_ATTR_CWMAX,
+        NL80211_TXQ_ATTR_AIFS,
+
+        /* keep last */
+        __NL80211_TXQ_ATTR_AFTER_LAST,
+        NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_txq_q {
+        NL80211_TXQ_Q_VO,
+        NL80211_TXQ_Q_VI,
+        NL80211_TXQ_Q_BE,
+        NL80211_TXQ_Q_BK
+};
+
+enum nl80211_channel_type {
+        NL80211_CHAN_NO_HT,
+        NL80211_CHAN_HT20,
+        NL80211_CHAN_HT40MINUS,
+        NL80211_CHAN_HT40PLUS
+};
 #endif /* __LINUX_NL80211_H */