1 files changed, 122 insertions, 0 deletions

diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
new file mode 100644
index 000000000000..7a7fbe87fef0
--- /dev/null
+++ b/include/linux/mtd/bbm.h
@@ -0,0 +1,122 @@
+/*
+ *  linux/include/linux/mtd/bbm.h
+ *
+ *  NAND family Bad Block Management (BBM) header file
+ *    - Bad Block Table (BBT) implementation
+ *
+ *  Copyright (c) 2005 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ *  Copyright (c) 2000-2005
+ *  Thomas Gleixner <tglx@linuxtronix.de>
+ *
+ */
+#ifndef __LINUX_MTD_BBM_H
+#define __LINUX_MTD_BBM_H
+
+/* The maximum number of NAND chips in an array */
+#define NAND_MAX_CHIPS          8
+
+/**
+ * struct nand_bbt_descr - bad block table descriptor
+ * @param options       options for this descriptor
+ * @param pages         the page(s) where we find the bbt, used with
+ *                      option BBT_ABSPAGE when bbt is searched,
+ *                      then we store the found bbts pages here.
+ *                      Its an array and supports up to 8 chips now
+ * @param offs          offset of the pattern in the oob area of the page
+ * @param veroffs       offset of the bbt version counter in the oob are of the page
+ * @param version       version read from the bbt page during scan
+ * @param len           length of the pattern, if 0 no pattern check is performed
+ * @param maxblocks     maximum number of blocks to search for a bbt. This number of
+ *                      blocks is reserved at the end of the device
+ *                      where the tables are written.
+ * @param reserved_block_code   if non-0, this pattern denotes a reserved
+ *                      (rather than bad) block in the stored bbt
+ * @param pattern       pattern to identify bad block table or factory marked
+ *                      good / bad blocks, can be NULL, if len = 0
+ *
+ * Descriptor for the bad block table marker and the descriptor for the
+ * pattern which identifies good and bad blocks. The assumption is made
+ * that the pattern and the version count are always located in the oob area
+ * of the first block.
+ */
+struct nand_bbt_descr {
+        int options;
+        int pages[NAND_MAX_CHIPS];
+        int offs;
+        int veroffs;
+        uint8_t version[NAND_MAX_CHIPS];
+        int len;
+        int maxblocks;
+        int reserved_block_code;
+        uint8_t *pattern;
+};
+
+/* Options for the bad block table descriptors */
+
+/* The number of bits used per block in the bbt on the device */
+#define NAND_BBT_NRBITS_MSK     0x0000000F
+#define NAND_BBT_1BIT           0x00000001
+#define NAND_BBT_2BIT           0x00000002
+#define NAND_BBT_4BIT           0x00000004
+#define NAND_BBT_8BIT           0x00000008
+/* The bad block table is in the last good block of the device */
+#define NAND_BBT_LASTBLOCK      0x00000010
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_ABSPAGE        0x00000020
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_SEARCH         0x00000040
+/* bbt is stored per chip on multichip devices */
+#define NAND_BBT_PERCHIP        0x00000080
+/* bbt has a version counter at offset veroffs */
+#define NAND_BBT_VERSION        0x00000100
+/* Create a bbt if none axists */
+#define NAND_BBT_CREATE         0x00000200
+/* Search good / bad pattern through all pages of a block */
+#define NAND_BBT_SCANALLPAGES   0x00000400
+/* Scan block empty during good / bad block scan */
+#define NAND_BBT_SCANEMPTY      0x00000800
+/* Write bbt if neccecary */
+#define NAND_BBT_WRITE          0x00001000
+/* Read and write back block contents when writing bbt */
+#define NAND_BBT_SAVECONTENT    0x00002000
+/* Search good / bad pattern on the first and the second page */
+#define NAND_BBT_SCAN2NDPAGE    0x00004000
+
+/* The maximum number of blocks to scan for a bbt */
+#define NAND_BBT_SCAN_MAXBLOCKS 4
+
+/*
+ * Constants for oob configuration
+ */
+#define ONENAND_BADBLOCK_POS    0
+
+/**
+ * struct bbt_info - [GENERIC] Bad Block Table data structure
+ * @param bbt_erase_shift       [INTERN] number of address bits in a bbt entry
+ * @param badblockpos           [INTERN] position of the bad block marker in the oob area
+ * @param bbt                   [INTERN] bad block table pointer
+ * @param badblock_pattern      [REPLACEABLE] bad block scan pattern used for initial bad block scan
+ * @param priv                  [OPTIONAL] pointer to private bbm date
+ */
+struct bbm_info {
+        int bbt_erase_shift;
+        int badblockpos;
+        int options;
+
+        uint8_t *bbt;
+
+        int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt);
+
+        /* TODO Add more NAND specific fileds */
+        struct nand_bbt_descr *badblock_pattern;
+
+        void *priv;
+};
+
+/* OneNAND BBT interface */
+extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int onenand_default_bbt(struct mtd_info *mtd);
+
+#endif  /* __LINUX_MTD_BBM_H */