3 files changed, 88 insertions, 7 deletions

diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 991a37382a22..d0e6a5497614 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -39,6 +39,10 @@ struct mmc_csd {
                                 write_misalign:1;
 };
 
+struct mmc_ext_csd {
+        unsigned int            hs_max_dtr;
+};
+
 struct sd_scr {
         unsigned char           sda_vsn;
         unsigned char           bus_widths;
@@ -46,6 +50,10 @@ struct sd_scr {
 #define SD_SCR_BUS_WIDTH_4      (1<<2)
 };
 
+struct sd_switch_caps {
+        unsigned int            hs_max_dtr;
+};
+
 struct mmc_host;
 
 /*
@@ -62,12 +70,15 @@ struct mmc_card {
 #define MMC_STATE_BAD           (1<<2)          /* unrecognised device */
 #define MMC_STATE_SDCARD        (1<<3)          /* is an SD card */
 #define MMC_STATE_READONLY      (1<<4)          /* card is read-only */
+#define MMC_STATE_HIGHSPEED     (1<<5)          /* card is in high speed mode */
         u32                     raw_cid[4];     /* raw card CID */
         u32                     raw_csd[4];     /* raw card CSD */
         u32                     raw_scr[2];     /* raw card SCR */
         struct mmc_cid          cid;            /* card identification */
         struct mmc_csd          csd;            /* card specific */
+        struct mmc_ext_csd      ext_csd;        /* mmc v4 extended card specific */
         struct sd_scr           scr;            /* extra SD information */
+        struct sd_switch_caps   sw_caps;        /* switch (CMD6) caps */
 };
 
 #define mmc_card_present(c)     ((c)->state & MMC_STATE_PRESENT)
@@ -75,12 +86,14 @@ struct mmc_card {
 #define mmc_card_bad(c)         ((c)->state & MMC_STATE_BAD)
 #define mmc_card_sd(c)          ((c)->state & MMC_STATE_SDCARD)
 #define mmc_card_readonly(c)    ((c)->state & MMC_STATE_READONLY)
+#define mmc_card_highspeed(c)   ((c)->state & MMC_STATE_HIGHSPEED)
 
 #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
 #define mmc_card_set_dead(c)    ((c)->state |= MMC_STATE_DEAD)
 #define mmc_card_set_bad(c)     ((c)->state |= MMC_STATE_BAD)
 #define mmc_card_set_sd(c)      ((c)->state |= MMC_STATE_SDCARD)
 #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
+#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
 
 #define mmc_card_name(c)        ((c)->cid.prod_name)
 #define mmc_card_id(c)          ((c)->dev.bus_id)
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 8b08ef3820f2..c15ae1986b98 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -74,8 +74,8 @@ struct mmc_card;
 struct device;
 
 struct mmc_host {
-        struct device           *dev;
-        struct class_device     class_dev;
+        struct device           *parent;
+        struct device           class_dev;
         int                     index;
         const struct mmc_host_ops *ops;
         unsigned int            f_min;
@@ -125,8 +125,8 @@ static inline void *mmc_priv(struct mmc_host *host)
         return (void *)host->private;
 }
 
-#define mmc_dev(x)      ((x)->dev)
-#define mmc_hostname(x) ((x)->class_dev.class_id)
+#define mmc_dev(x)      ((x)->parent)
+#define mmc_hostname(x) ((x)->class_dev.bus_id)
 
 extern int mmc_suspend_host(struct mmc_host *, pm_message_t);
 extern int mmc_resume_host(struct mmc_host *);
diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h
index 08dec8d9e703..2dce60c43f4b 100644
--- a/include/linux/mmc/protocol.h
+++ b/include/linux/mmc/protocol.h
@@ -25,14 +25,16 @@
 #ifndef MMC_MMC_PROTOCOL_H
 #define MMC_MMC_PROTOCOL_H
 
-/* Standard MMC commands (3.1)           type  argument     response */
+/* Standard MMC commands (4.1)           type  argument     response */
    /* class 1 */
 #define MMC_GO_IDLE_STATE         0   /* bc                          */
 #define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
 #define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
 #define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
 #define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
+#define MMC_SWITCH                6   /* ac   [31:0] See below   R1b */
 #define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
+#define MMC_SEND_EXT_CSD          8   /* adtc                    R1  */
 #define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
 #define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
 #define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
@@ -80,6 +82,7 @@
   /* class 8 */
 /* This is basically the same command as for MMC with some quirks. */
 #define SD_SEND_RELATIVE_ADDR     3   /* bcr                     R6  */
+#define SD_SWITCH                 6   /* adtc [31:0] See below   R1  */
 
   /* Application commands */
 #define SD_APP_SET_BUS_WIDTH      6   /* ac   [1:0] bus width    R1  */
@@ -88,6 +91,30 @@
 #define SD_APP_SEND_SCR          51   /* adtc                    R1  */
 
 /*
+ * MMC_SWITCH argument format:
+ *
+ *      [31:26] Always 0
+ *      [25:24] Access Mode
+ *      [23:16] Location of target Byte in EXT_CSD
+ *      [15:08] Value Byte
+ *      [07:03] Always 0
+ *      [02:00] Command Set
+ */
+
+/*
+ * SD_SWITCH argument format:
+ *
+ *      [31] Check (0) or switch (1)
+ *      [30:24] Reserved (0)
+ *      [23:20] Function group 6
+ *      [19:16] Function group 5
+ *      [15:12] Function group 4
+ *      [11:8] Function group 3
+ *      [7:4] Function group 2
+ *      [3:0] Function group 1
+ */
+
+/*
   MMC status in R1
   Type
         e : error bit
@@ -230,13 +257,54 @@ struct _mmc_csd {
 
 #define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
 #define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
-#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1       */
+#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
+#define CSD_STRUCT_EXT_CSD  3           /* Version is coded in CSD_STRUCTURE in EXT_CSD */
 
 #define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
 #define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
 #define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
-#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 */
+#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 - 3.2 - 3.31 */
+#define CSD_SPEC_VER_4      4           /* Implements system specification 4.0 - 4.1 */
+
+/*
+ * EXT_CSD fields
+ */
+
+#define EXT_CSD_BUS_WIDTH       183     /* R/W */
+#define EXT_CSD_HS_TIMING       185     /* R/W */
+#define EXT_CSD_CARD_TYPE       196     /* RO */
+
+/*
+ * EXT_CSD field definitions
+ */
+
+#define EXT_CSD_CMD_SET_NORMAL          (1<<0)
+#define EXT_CSD_CMD_SET_SECURE          (1<<1)
+#define EXT_CSD_CMD_SET_CPSECURE        (1<<2)
+
+#define EXT_CSD_CARD_TYPE_26    (1<<0)  /* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_52    (1<<1)  /* Card can run at 52MHz */
+
+#define EXT_CSD_BUS_WIDTH_1     0       /* Card is in 1 bit mode */
+#define EXT_CSD_BUS_WIDTH_4     1       /* Card is in 4 bit mode */
+#define EXT_CSD_BUS_WIDTH_8     2       /* Card is in 8 bit mode */
+
+/*
+ * MMC_SWITCH access modes
+ */
+
+#define MMC_SWITCH_MODE_CMD_SET         0x00    /* Change the command set */
+#define MMC_SWITCH_MODE_SET_BITS        0x01    /* Set bits which are 1 in value */
+#define MMC_SWITCH_MODE_CLEAR_BITS      0x02    /* Clear bits which are 1 in value */
+#define MMC_SWITCH_MODE_WRITE_BYTE      0x03    /* Set target to value */
+
+/*
+ * SCR field definitions
+ */
 
+#define SCR_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.01 */
+#define SCR_SPEC_VER_1      1           /* Implements system specification 1.10 */
+#define SCR_SPEC_VER_2      2           /* Implements system specification 2.00 */
 
 /*
  * SD bus widths