1 files changed, 79 insertions, 0 deletions

diff --git a/include/linux/i2c/dm355evm_msp.h b/include/linux/i2c/dm355evm_msp.h
new file mode 100644
index 000000000000..372470350fab
--- /dev/null
+++ b/include/linux/i2c/dm355evm_msp.h
@@ -0,0 +1,79 @@
+/*
+ * dm355evm_msp.h - support MSP430 microcontroller on DM355EVM board
+ */
+#ifndef __LINUX_I2C_DM355EVM_MSP
+#define __LINUX_I2C_DM355EVM_MSP
+
+/*
+ * Written against Spectrum's writeup for the A4 firmware revision,
+ * and tweaked to match source and rev D2 schematics by removing CPLD
+ * and NOR flash hooks (which were last appropriate in rev B boards).
+ *
+ * Note that the firmware supports a flavor of write posting ... to be
+ * sure a write completes, issue another read or write.
+ */
+
+/* utilities to access "registers" emulated by msp430 firmware */
+extern int dm355evm_msp_write(u8 value, u8 reg);
+extern int dm355evm_msp_read(u8 reg);
+
+
+/* command/control registers */
+#define DM355EVM_MSP_COMMAND            0x00
+#       define MSP_COMMAND_NULL         0
+#       define MSP_COMMAND_RESET_COLD   1
+#       define MSP_COMMAND_RESET_WARM   2
+#       define MSP_COMMAND_RESET_WARM_I 3
+#       define MSP_COMMAND_POWEROFF     4
+#       define MSP_COMMAND_IR_REINIT    5
+#define DM355EVM_MSP_STATUS             0x01
+#       define MSP_STATUS_BAD_OFFSET    BIT(0)
+#       define MSP_STATUS_BAD_COMMAND   BIT(1)
+#       define MSP_STATUS_POWER_ERROR   BIT(2)
+#       define MSP_STATUS_RXBUF_OVERRUN BIT(3)
+#define DM355EVM_MSP_RESET              0x02    /* 0 bits == in reset */
+#       define MSP_RESET_DC5            BIT(0)
+#       define MSP_RESET_TVP5154        BIT(2)
+#       define MSP_RESET_IMAGER         BIT(3)
+#       define MSP_RESET_ETHERNET       BIT(4)
+#       define MSP_RESET_SYS            BIT(5)
+#       define MSP_RESET_AIC33          BIT(7)
+
+/* GPIO registers ... bit patterns mostly match the source MSP ports */
+#define DM355EVM_MSP_LED                0x03    /* active low (MSP P4) */
+#define DM355EVM_MSP_SWITCH1            0x04    /* (MSP P5, masked) */
+#       define MSP_SWITCH1_SW6_1        BIT(0)
+#       define MSP_SWITCH1_SW6_2        BIT(1)
+#       define MSP_SWITCH1_SW6_3        BIT(2)
+#       define MSP_SWITCH1_SW6_4        BIT(3)
+#       define MSP_SWITCH1_J1           BIT(4)  /* NTSC/PAL */
+#       define MSP_SWITCH1_MSP_INT      BIT(5)  /* active low */
+#define DM355EVM_MSP_SWITCH2            0x05    /* (MSP P6, masked) */
+#       define MSP_SWITCH2_SW10         BIT(3)
+#       define MSP_SWITCH2_SW11         BIT(4)
+#       define MSP_SWITCH2_SW12         BIT(5)
+#       define MSP_SWITCH2_SW13         BIT(6)
+#       define MSP_SWITCH2_SW14         BIT(7)
+#define DM355EVM_MSP_SDMMC              0x06    /* (MSP P2, masked) */
+#       define MSP_SDMMC_0_WP           BIT(1)
+#       define MSP_SDMMC_0_CD           BIT(2)  /* active low */
+#       define MSP_SDMMC_1_WP           BIT(3)
+#       define MSP_SDMMC_1_CD           BIT(4)  /* active low */
+#define DM355EVM_MSP_FIRMREV            0x07    /* not a GPIO (out of order) */
+#define DM355EVM_MSP_VIDEO_IN           0x08    /* (MSP P3, masked) */
+#       define MSP_VIDEO_IMAGER         BIT(7)  /* low == tvp5146 */
+
+/* power supply registers are currently omitted */
+
+/* RTC registers */
+#define DM355EVM_MSP_RTC_0              0x12    /* LSB */
+#define DM355EVM_MSP_RTC_1              0x13
+#define DM355EVM_MSP_RTC_2              0x14
+#define DM355EVM_MSP_RTC_3              0x15    /* MSB */
+
+/* input event queue registers; code == ((HIGH << 8) | LOW) */
+#define DM355EVM_MSP_INPUT_COUNT        0x16    /* decrement by reading LOW */
+#define DM355EVM_MSP_INPUT_HIGH         0x17
+#define DM355EVM_MSP_INPUT_LOW          0x18
+
+#endif /* __LINUX_I2C_DM355EVM_MSP */