1 files changed, 0 insertions, 201 deletions

diff --git a/include/linux/ftape.h b/include/linux/ftape.h
deleted file mode 100644
index 7e7038cba86a..000000000000
--- a/include/linux/ftape.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef _FTAPE_H
-#define _FTAPE_H
-
-/*
- * Copyright (C) 1994-1996 Bas Laarhoven,
- *           (C) 1996-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/include/linux/ftape.h,v $
- * $Revision: 1.17.6.4 $
- * $Date: 1997/11/25 01:52:54 $
- *
- *      This file contains global definitions, typedefs and macro's
- *      for the QIC-40/80/3010/3020 floppy-tape driver for Linux.
- */
-
-#define FTAPE_VERSION "ftape v3.04d 25/11/97"
-
-#ifdef __KERNEL__
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#endif
-#include <linux/types.h>
-#include <linux/mtio.h>
-
-#define FT_SECTOR(x)            (x+1)   /* sector offset into real sector */
-#define FT_SECTOR_SIZE          1024
-#define FT_SECTORS_PER_SEGMENT    32
-#define FT_ECC_SECTORS             3
-#define FT_SEGMENT_SIZE         ((FT_SECTORS_PER_SEGMENT - FT_ECC_SECTORS) * FT_SECTOR_SIZE)
-#define FT_BUFF_SIZE    (FT_SECTORS_PER_SEGMENT * FT_SECTOR_SIZE)
-
-/*
- *   bits of the minor device number that define drive selection
- *   methods. Could be used one day to access multiple tape
- *   drives on the same controller.
- */
-#define FTAPE_SEL_A     0
-#define FTAPE_SEL_B     1
-#define FTAPE_SEL_C     2
-#define FTAPE_SEL_D     3
-#define FTAPE_SEL_MASK     3
-#define FTAPE_SEL(unit) ((unit) & FTAPE_SEL_MASK)
-#define FTAPE_NO_REWIND 4       /* mask for minor nr */
-
-/* the following two may be reported when MTIOCGET is requested ... */
-typedef union {
-        struct {
-                __u8 error;
-                __u8 command;
-        } error;
-        long space;
-} ft_drive_error;
-typedef union {
-        struct {
-                __u8 drive_status;
-                __u8 drive_config;
-                __u8 tape_status;
-        } status;
-        long space;
-} ft_drive_status;
-
-#ifdef __KERNEL__
-
-#define FT_RQM_DELAY    12
-#define FT_MILLISECOND  1
-#define FT_SECOND       1000
-#define FT_FOREVER      -1
-#ifndef HZ
-#error "HZ undefined."
-#endif
-#define FT_USPT         (1000000/HZ) /* microseconds per tick */
-
-/* This defines the number of retries that the driver will allow
- * before giving up (and letting a higher level handle the error).
- */
-#ifdef TESTING
-#define FT_SOFT_RETRIES 1          /* number of low level retries */
-#define FT_RETRIES_ON_ECC_ERROR 3  /* ecc error when correcting segment */
-#else
-#define FT_SOFT_RETRIES 6          /* number of low level retries (triple) */
-#define FT_RETRIES_ON_ECC_ERROR 3  /* ecc error when correcting segment */
-#endif
-
-#ifndef THE_FTAPE_MAINTAINER
-#define THE_FTAPE_MAINTAINER "the ftape maintainer"
-#endif
-
-/* Initialize missing configuration parameters.
- */
-#ifndef CONFIG_FT_NR_BUFFERS
-# define CONFIG_FT_NR_BUFFERS 3
-#endif
-#ifndef CONFIG_FT_FDC_THR
-# define CONFIG_FT_FDC_THR 8
-#endif
-#ifndef CONFIG_FT_FDC_MAX_RATE
-# define CONFIG_FT_FDC_MAX_RATE 2000
-#endif
-#ifndef CONFIG_FT_FDC_BASE
-# define CONFIG_FT_FDC_BASE 0
-#endif
-#ifndef CONFIG_FT_FDC_IRQ
-# define CONFIG_FT_FDC_IRQ  0
-#endif
-#ifndef CONFIG_FT_FDC_DMA
-# define CONFIG_FT_FDC_DMA  0
-#endif
-
-/* Turn some booleans into numbers.
- */
-#ifdef CONFIG_FT_PROBE_FC10
-# undef CONFIG_FT_PROBE_FC10
-# define CONFIG_FT_PROBE_FC10 1
-#else
-# define CONFIG_FT_PROBE_FC10 0
-#endif
-#ifdef CONFIG_FT_MACH2
-# undef CONFIG_FT_MACH2
-# define CONFIG_FT_MACH2 1
-#else
-# define CONFIG_FT_MACH2 0
-#endif
-
-/* Insert default settings
- */
-#if CONFIG_FT_PROBE_FC10 == 1
-# if CONFIG_FT_FDC_BASE == 0
-#  undef  CONFIG_FT_FDC_BASE
-#  define CONFIG_FT_FDC_BASE 0x180
-# endif
-# if CONFIG_FT_FDC_IRQ == 0
-#  undef  CONFIG_FT_FDC_IRQ
-#  define CONFIG_FT_FDC_IRQ 9
-# endif
-# if CONFIG_FT_FDC_DMA == 0
-#  undef  CONFIG_FT_FDC_DMA
-#  define CONFIG_FT_FDC_DMA 3
-# endif
-#elif CONFIG_FT_MACH2 == 1    /* CONFIG_FT_PROBE_FC10 == 1 */
-# if CONFIG_FT_FDC_BASE == 0
-#  undef  CONFIG_FT_FDC_BASE
-#  define CONFIG_FT_FDC_BASE 0x1E0
-# endif
-# if CONFIG_FT_FDC_IRQ == 0
-#  undef  CONFIG_FT_FDC_IRQ
-#  define CONFIG_FT_FDC_IRQ 6
-# endif
-# if CONFIG_FT_FDC_DMA == 0
-#  undef  CONFIG_FT_FDC_DMA
-#  define CONFIG_FT_FDC_DMA 2
-# endif
-#elif defined(CONFIG_FT_ALT_FDC)  /* CONFIG_FT_MACH2 */
-# if CONFIG_FT_FDC_BASE == 0
-#  undef  CONFIG_FT_FDC_BASE
-#  define CONFIG_FT_FDC_BASE 0x370
-# endif
-# if CONFIG_FT_FDC_IRQ == 0
-#  undef  CONFIG_FT_FDC_IRQ
-#  define CONFIG_FT_FDC_IRQ 6
-# endif
-# if CONFIG_FT_FDC_DMA == 0
-#  undef  CONFIG_FT_FDC_DMA
-#  define CONFIG_FT_FDC_DMA 2
-# endif
-#else                          /* CONFIG_FT_ALT_FDC */
-# if CONFIG_FT_FDC_BASE == 0
-#  undef  CONFIG_FT_FDC_BASE
-#  define CONFIG_FT_FDC_BASE 0x3f0
-# endif
-# if CONFIG_FT_FDC_IRQ == 0
-#  undef  CONFIG_FT_FDC_IRQ
-#  define CONFIG_FT_FDC_IRQ 6
-# endif
-# if CONFIG_FT_FDC_DMA == 0
-#  undef  CONFIG_FT_FDC_DMA
-#  define CONFIG_FT_FDC_DMA 2
-# endif
-#endif                         /* standard FDC */
-
-/*      some useful macro's
- */
-#define NR_ITEMS(x)     (int)(sizeof(x)/ sizeof(*x))
-
-#endif  /* __KERNEL__ */
-
-#endif