1 files changed, 0 insertions, 61 deletions
diff --git a/include/asm-x86/vic.h b/include/asm-x86/vic.h
deleted file mode 100644
index 53100f353612..000000000000
--- a/include/asm-x86/vic.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * Standard include definitions for the NCR Voyager Interrupt Controller */
-/* The eight CPI vectors.  To activate a CPI, you write a bit mask
- * corresponding to the processor set to be interrupted into the
- * relevant register.  That set of CPUs will then be interrupted with
- * the CPI */
-static const int VIC_CPI_Registers[] =
-        {0xFC00, 0xFC01, 0xFC08, 0xFC09,
-         0xFC10, 0xFC11, 0xFC18, 0xFC19 };
-#define VIC_PROC_WHO_AM_I               0xfc29
-#       define  QUAD_IDENTIFIER         0xC0
-#       define  EIGHT_SLOT_IDENTIFIER   0xE0
-#define QIC_EXTENDED_PROCESSOR_SELECT   0xFC72
-#define VIC_CPI_BASE_REGISTER           0xFC41
-#define VIC_PROCESSOR_ID                0xFC21
-#       define VIC_CPU_MASQUERADE_ENABLE 0x8
-#define VIC_CLAIM_REGISTER_0            0xFC38
-#define VIC_CLAIM_REGISTER_1            0xFC39
-#define VIC_REDIRECT_REGISTER_0         0xFC60
-#define VIC_REDIRECT_REGISTER_1         0xFC61
-#define VIC_PRIORITY_REGISTER           0xFC20
-#define VIC_PRIMARY_MC_BASE             0xFC48
-#define VIC_SECONDARY_MC_BASE           0xFC49
-#define QIC_PROCESSOR_ID                0xFC71
-#       define  QIC_CPUID_ENABLE        0x08
-#define QIC_VIC_CPI_BASE_REGISTER       0xFC79
-#define QIC_CPI_BASE_REGISTER           0xFC7A
-#define QIC_MASK_REGISTER0              0xFC80
-/* NOTE: these are masked high, enabled low */
-#       define QIC_PERF_TIMER           0x01
-#       define QIC_LPE                  0x02
-#       define QIC_SYS_INT              0x04
-#       define QIC_CMN_INT              0x08
-/* at the moment, just enable CMN_INT, disable SYS_INT */
-#       define QIC_DEFAULT_MASK0        (~(QIC_CMN_INT /* | VIC_SYS_INT */))
-#define QIC_MASK_REGISTER1              0xFC81
-#       define QIC_BOOT_CPI_MASK        0xFE
-/* Enable CPI's 1-6 inclusive */
-#       define QIC_CPI_ENABLE           0x81
-#define QIC_INTERRUPT_CLEAR0            0xFC8A
-#define QIC_INTERRUPT_CLEAR1            0xFC8B
-/* this is where we place the CPI vectors */
-#define VIC_DEFAULT_CPI_BASE            0xC0
-/* this is where we place the QIC CPI vectors */
-#define QIC_DEFAULT_CPI_BASE            0xD0
-#define VIC_BOOT_INTERRUPT_MASK         0xfe
-extern void smp_vic_timer_interrupt(void);

diff --git a/include/asm-x86/vic.h b/include/asm-x86/vic.h deleted file mode 100644 index 53100f353612..000000000000 --- a/include/asm-x86/vic.h +++ /dev/null
@@ -1,61 +0,0 @@
1	/* Copyright (C) 1999,2001
2	*
3	* Author: J.E.J.Bottomley@HansenPartnership.com
4	*
5	* Standard include definitions for the NCR Voyager Interrupt Controller */
6
7	/* The eight CPI vectors. To activate a CPI, you write a bit mask
8	* corresponding to the processor set to be interrupted into the
9	* relevant register. That set of CPUs will then be interrupted with
10	* the CPI */
11	static const int VIC_CPI_Registers[] =
12	{0xFC00, 0xFC01, 0xFC08, 0xFC09,
13	0xFC10, 0xFC11, 0xFC18, 0xFC19 };
14
15	#define VIC_PROC_WHO_AM_I 0xfc29
16	# define QUAD_IDENTIFIER 0xC0
17	# define EIGHT_SLOT_IDENTIFIER 0xE0
18	#define QIC_EXTENDED_PROCESSOR_SELECT 0xFC72
19	#define VIC_CPI_BASE_REGISTER 0xFC41
20	#define VIC_PROCESSOR_ID 0xFC21
21	# define VIC_CPU_MASQUERADE_ENABLE 0x8
22
23	#define VIC_CLAIM_REGISTER_0 0xFC38
24	#define VIC_CLAIM_REGISTER_1 0xFC39
25	#define VIC_REDIRECT_REGISTER_0 0xFC60
26	#define VIC_REDIRECT_REGISTER_1 0xFC61
27	#define VIC_PRIORITY_REGISTER 0xFC20
28
29	#define VIC_PRIMARY_MC_BASE 0xFC48
30	#define VIC_SECONDARY_MC_BASE 0xFC49
31
32	#define QIC_PROCESSOR_ID 0xFC71
33	# define QIC_CPUID_ENABLE 0x08
34
35	#define QIC_VIC_CPI_BASE_REGISTER 0xFC79
36	#define QIC_CPI_BASE_REGISTER 0xFC7A
37
38	#define QIC_MASK_REGISTER0 0xFC80
39	/* NOTE: these are masked high, enabled low */
40	# define QIC_PERF_TIMER 0x01
41	# define QIC_LPE 0x02
42	# define QIC_SYS_INT 0x04
43	# define QIC_CMN_INT 0x08
44	/* at the moment, just enable CMN_INT, disable SYS_INT */
45	# define QIC_DEFAULT_MASK0 (~(QIC_CMN_INT /* \| VIC_SYS_INT */))
46	#define QIC_MASK_REGISTER1 0xFC81
47	# define QIC_BOOT_CPI_MASK 0xFE
48	/* Enable CPI's 1-6 inclusive */
49	# define QIC_CPI_ENABLE 0x81
50
51	#define QIC_INTERRUPT_CLEAR0 0xFC8A
52	#define QIC_INTERRUPT_CLEAR1 0xFC8B
53
54	/* this is where we place the CPI vectors */
55	#define VIC_DEFAULT_CPI_BASE 0xC0
56	/* this is where we place the QIC CPI vectors */
57	#define QIC_DEFAULT_CPI_BASE 0xD0
58
59	#define VIC_BOOT_INTERRUPT_MASK 0xfe
60
61	extern void smp_vic_timer_interrupt(void);