1 files changed, 1 insertions, 83 deletions

diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
index c47f58d6c15c..ca19f80a9b7d 100644
--- a/include/asm-sparc64/floppy.h
+++ b/include/asm-sparc64/floppy.h
@@ -293,7 +293,6 @@ static int sun_fd_eject(int drive)
 
 #ifdef CONFIG_PCI
 #include <asm/ebus.h>
-#include <asm/isa.h>
 #include <asm/ns87303.h>
 
 static struct ebus_dma_info sun_pci_fd_ebus_dma;
@@ -558,82 +557,6 @@ static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
 }
 #endif
 
-#ifdef CONFIG_PCI
-#undef ISA_FLOPPY_WORKS
-
-#ifdef ISA_FLOPPY_WORKS
-static unsigned long __init isa_floppy_init(void)
-{
-        struct sparc_isa_bridge *isa_br;
-        struct sparc_isa_device *isa_dev = NULL;
-
-        for_each_isa(isa_br) {
-                for_each_isadev(isa_dev, isa_br) {
-                        if (!strcmp(isa_dev->prom_node->name, "dma")) {
-                                struct sparc_isa_device *child =
-                                        isa_dev->child;
-
-                                while (child) {
-                                        if (!strcmp(child->prom_node->name,
-                                                    "floppy")) {
-                                                isa_dev = child;
-                                                goto isa_done;
-                                        }
-                                        child = child->next;
-                                }
-                        }
-                }
-        }
-isa_done:
-        if (!isa_dev)
-                return 0;
-
-        /* We could use DMA on devices behind the ISA bridge, but...
-         *
-         * There is a slight problem.  Normally on x86 kit the x86 processor
-         * delays I/O port instructions when the ISA bus "dma in progress"
-         * signal is active.  Well, sparc64 systems do not monitor this
-         * signal thus we would need to block all I/O port accesses in software
-         * when a dma transfer is active for some device.
-         */
-
-        sun_fdc = (struct sun_flpy_controller *)isa_dev->resource.start;
-        FLOPPY_IRQ = isa_dev->irq;
-
-        sun_fdops.fd_inb = sun_pci_fd_inb;
-        sun_fdops.fd_outb = sun_pci_fd_outb;
-
-        can_use_virtual_dma = use_virtual_dma = 1;
-        sun_fdops.fd_enable_dma = sun_fd_enable_dma;
-        sun_fdops.fd_disable_dma = sun_fd_disable_dma;
-        sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
-        sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
-        sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
-        sun_fdops.get_dma_residue = sun_get_dma_residue;
-
-        sun_fdops.fd_request_irq = sun_fd_request_irq;
-        sun_fdops.fd_free_irq = sun_fd_free_irq;
-
-        /* Floppy eject is manual.   Actually, could determine this
-         * via presence of 'manual' property in OBP node.
-         */
-        sun_fdops.fd_eject = sun_pci_fd_eject;
-
-        fdc_status = (unsigned long) &sun_fdc->status_82077;
-
-        allowed_drive_mask = 0;
-        sun_floppy_types[0] = 0;
-        sun_floppy_types[1] = 4;
-
-        sun_pci_broken_drive = 1;
-        sun_fdops.fd_outb = sun_pci_fd_broken_outb;
-
-        return sun_floppy_types[0];
-}
-#endif /* ISA_FLOPPY_WORKS */
-
-#endif
-
 static unsigned long __init sun_floppy_init(void)
 {
         char state[128];
@@ -667,13 +590,8 @@ static unsigned long __init sun_floppy_init(void)
                         }
                 }
         ebus_done:
-                if (!edev) {
-#ifdef ISA_FLOPPY_WORKS
-                        return isa_floppy_init();
-#else
+                if (!edev)
                         return 0;
-#endif
-                }
 
                 state_prop = of_get_property(edev->prom_node, "status", NULL);
                 if (state_prop && !strncmp(state_prop, "disabled", 8))