1 files changed, 0 insertions, 234 deletions
diff --git a/include/asm-sparc64/audioio.h b/include/asm-sparc64/audioio.h
deleted file mode 100644
index cf16173f521b..000000000000
--- a/include/asm-sparc64/audioio.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * include/asm-sparc/audioio.h
- *
- * Sparc Audio Midlayer
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
- */
-#ifndef _AUDIOIO_H_
-#define _AUDIOIO_H_
-/*
- *      SunOS/Solaris /dev/audio interface
- */
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/ioctl.h>
-#endif
-/*
- * This structure contains state information for audio device IO streams.
- */
-typedef struct audio_prinfo {
-        /*
-         * The following values describe the audio data encoding.
-         */
-        unsigned int sample_rate;       /* samples per second */
-        unsigned int channels;  /* number of interleaved channels */
-        unsigned int precision; /* bit-width of each sample */
-        unsigned int encoding;  /* data encoding method */
-        /*
-         * The following values control audio device configuration
-         */
-        unsigned int gain;              /* gain level: 0 - 255 */
-        unsigned int port;              /* selected I/O port (see below) */
-        unsigned int avail_ports;       /* available I/O ports (see below) */
-        unsigned int _xxx[2];           /* Reserved for future use */
-        unsigned int buffer_size;       /* I/O buffer size */
-        /*
-         * The following values describe driver state
-         */
-        unsigned int samples;           /* number of samples converted */
-        unsigned int eof;               /* End Of File counter (play only) */
-        unsigned char   pause;          /* non-zero for pause, zero to resume */
-        unsigned char   error;          /* non-zero if overflow/underflow */
-        unsigned char   waiting;        /* non-zero if a process wants access */
-        unsigned char balance;  /* stereo channel balance */
-        unsigned short minordev;
-        /*
-         * The following values are read-only state flags
-         */
-        unsigned char open;             /* non-zero if open access permitted */
-        unsigned char active;           /* non-zero if I/O is active */
-} audio_prinfo_t;
-/*
- * This structure describes the current state of the audio device.
- */
-typedef struct audio_info {
-        /*
-         * Per-stream information
-         */
-        audio_prinfo_t play;    /* output status information */
-        audio_prinfo_t record;  /* input status information */
-        /*
-         * Per-unit/channel information
-         */
-        unsigned int monitor_gain;      /* input to output mix: 0 - 255 */
-        unsigned char output_muted;     /* non-zero if output is muted */
-        unsigned char _xxx[3];  /* Reserved for future use */
-        unsigned int _yyy[3];           /* Reserved for future use */
-} audio_info_t;
-/*
- * Audio encoding types
- */
-#define AUDIO_ENCODING_NONE     (0)     /* no encoding assigned   */
-#define AUDIO_ENCODING_ULAW     (1)     /* u-law encoding         */
-#define AUDIO_ENCODING_ALAW     (2)     /* A-law encoding         */
-#define AUDIO_ENCODING_LINEAR   (3)     /* Linear PCM encoding    */
-#define AUDIO_ENCODING_FLOAT    (4)     /* IEEE float (-1. <-> +1.) */
-#define AUDIO_ENCODING_DVI      (104)   /* DVI ADPCM              */
-#define AUDIO_ENCODING_LINEAR8  (105)   /* 8 bit UNSIGNED         */
-#define AUDIO_ENCODING_LINEARLE (106)   /* Linear PCM LE encoding */
-/*
- * These ranges apply to record, play, and monitor gain values
- */
-#define AUDIO_MIN_GAIN  (0)     /* minimum gain value */
-#define AUDIO_MAX_GAIN  (255)   /* maximum gain value */
-/*
- * These values apply to the balance field to adjust channel gain values
- */
-#define AUDIO_LEFT_BALANCE      (0)     /* left channel only    */
-#define AUDIO_MID_BALANCE       (32)    /* equal left/right channel */
-#define AUDIO_RIGHT_BALANCE     (64)    /* right channel only   */
-#define AUDIO_BALANCE_SHIFT     (3)
-/*
- * Generic minimum/maximum limits for number of channels, both modes
- */
-#define AUDIO_MIN_PLAY_CHANNELS (1)
-#define AUDIO_MAX_PLAY_CHANNELS (4)
-#define AUDIO_MIN_REC_CHANNELS  (1)
-#define AUDIO_MAX_REC_CHANNELS  (4)
-/*
- * Generic minimum/maximum limits for sample precision
- */
-#define AUDIO_MIN_PLAY_PRECISION        (8)
-#define AUDIO_MAX_PLAY_PRECISION        (32)
-#define AUDIO_MIN_REC_PRECISION         (8)
-#define AUDIO_MAX_REC_PRECISION         (32)
-/*
- * Define some convenient names for typical audio ports
- */
-/*
- * output ports (several may be enabled simultaneously)
- */
-#define AUDIO_SPEAKER           0x01    /* output to built-in speaker */
-#define AUDIO_HEADPHONE         0x02    /* output to headphone jack */
-#define AUDIO_LINE_OUT          0x04    /* output to line out    */
-/*
- * input ports (usually only one at a time)
- */
-#define AUDIO_MICROPHONE        0x01    /* input from microphone */
-#define AUDIO_LINE_IN           0x02    /* input from line in    */
-#define AUDIO_CD                0x04    /* input from on-board CD inputs */
-#define AUDIO_INTERNAL_CD_IN    AUDIO_CD        /* input from internal CDROM */
-#define AUDIO_ANALOG_LOOPBACK   0x40    /* input from output */
-/*
- * This macro initializes an audio_info structure to 'harmless' values.
- * Note that (~0) might not be a harmless value for a flag that was
- * a signed int.
- */
-#define AUDIO_INITINFO(i)       {                                       \
-        unsigned int    *__x__;                                         \
-        for (__x__ = (unsigned int *)(i);                               \
-            (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t));   \
-            *__x__++ = ~0);                                             \
-}
-/*
- * These allow testing for what the user wants to set 
- */
-#define AUD_INITVALUE   (~0)
-#define Modify(X)       ((unsigned int)(X) != AUD_INITVALUE)
-#define Modifys(X)      ((X) != (unsigned short)AUD_INITVALUE)
-#define Modifyc(X)      ((X) != (unsigned char)AUD_INITVALUE)
-/*
- * Parameter for the AUDIO_GETDEV ioctl to determine current
- * audio devices.
- */
-#define MAX_AUDIO_DEV_LEN       (16)
-typedef struct audio_device {
-        char name[MAX_AUDIO_DEV_LEN];
-        char version[MAX_AUDIO_DEV_LEN];
-        char config[MAX_AUDIO_DEV_LEN];
-} audio_device_t;
-/*
- * Ioctl calls for the audio device.
- */
-/*
- * AUDIO_GETINFO retrieves the current state of the audio device.
- *
- * AUDIO_SETINFO copies all fields of the audio_info structure whose
- * values are not set to the initialized value (-1) to the device state.
- * It performs an implicit AUDIO_GETINFO to return the new state of the
- * device.  Note that the record.samples and play.samples fields are set
- * to the last value before the AUDIO_SETINFO took effect.  This allows
- * an application to reset the counters while atomically retrieving the
- * last value.
- *
- * AUDIO_DRAIN suspends the calling process until the write buffers are
- * empty.
- *
- * AUDIO_GETDEV returns a structure of type audio_device_t which contains
- * three strings.  The string "name" is a short identifying string (for
- * example, the SBus Fcode name string), the string "version" identifies
- * the current version of the device, and the "config" string identifies
- * the specific configuration of the audio stream.  All fields are
- * device-dependent -- see the device specific manual pages for details.
- *
- * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined 
- * herein (making it not too portable)
- *
- * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, 
- * resets error counters, and restarts recording and playback as appropriate
- * for the current sampling mode.
- */
-#define AUDIO_GETINFO   _IOR('A', 1, audio_info_t)
-#define AUDIO_SETINFO   _IOWR('A', 2, audio_info_t)
-#define AUDIO_DRAIN     _IO('A', 3)
-#define AUDIO_GETDEV    _IOR('A', 4, audio_device_t)
-#define AUDIO_GETDEV_SUNOS      _IOR('A', 4, int)
-#define AUDIO_FLUSH     _IO('A', 5)
-/* Define possible audio hardware configurations for 
- * old SunOS-style AUDIO_GETDEV ioctl */
-#define AUDIO_DEV_UNKNOWN       (0)     /* not defined */
-#define AUDIO_DEV_AMD           (1)     /* audioamd device */
-#define AUDIO_DEV_SPEAKERBOX    (2)     /* dbri device with speakerbox */
-#define AUDIO_DEV_CODEC         (3)     /* dbri device (internal speaker) */
-#define AUDIO_DEV_CS4231        (5)     /* cs4231 device */
-/*
- * The following ioctl sets the audio device into an internal loopback mode,
- * if the hardware supports this.  The argument is TRUE to set loopback,
- * FALSE to reset to normal operation.  If the hardware does not support
- * internal loopback, the ioctl should fail with EINVAL.
- * Causes ADC data to be digitally mixed in and sent to the DAC.
- */
-#define AUDIO_DIAG_LOOPBACK     _IOW('A', 101, int)
-#endif /* _AUDIOIO_H_ */

diff --git a/include/asm-sparc64/audioio.h b/include/asm-sparc64/audioio.h deleted file mode 100644 index cf16173f521b..000000000000 --- a/include/asm-sparc64/audioio.h +++ /dev/null
@@ -1,234 +0,0 @@
1	/*
2	* include/asm-sparc/audioio.h
3	*
4	* Sparc Audio Midlayer
5	* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
6	*/
7
8	#ifndef _AUDIOIO_H_
9	#define _AUDIOIO_H_
10
11	/*
12	* SunOS/Solaris /dev/audio interface
13	*/
14
15	#if defined(__KERNEL__) \|\| !defined(__GLIBC__) \|\| (__GLIBC__ < 2)
16	#include <linux/types.h>
17	#include <linux/time.h>
18	#include <linux/ioctl.h>
19	#endif
20
21	/*
22	* This structure contains state information for audio device IO streams.
23	*/
24	typedef struct audio_prinfo {
25	/*
26	* The following values describe the audio data encoding.
27	*/
28	unsigned int sample_rate; /* samples per second */
29	unsigned int channels; /* number of interleaved channels */
30	unsigned int precision; /* bit-width of each sample */
31	unsigned int encoding; /* data encoding method */
32
33	/*
34	* The following values control audio device configuration
35	*/
36	unsigned int gain; /* gain level: 0 - 255 */
37	unsigned int port; /* selected I/O port (see below) */
38	unsigned int avail_ports; /* available I/O ports (see below) */
39	unsigned int _xxx[2]; /* Reserved for future use */
40
41	unsigned int buffer_size; /* I/O buffer size */
42
43	/*
44	* The following values describe driver state
45	*/
46	unsigned int samples; /* number of samples converted */
47	unsigned int eof; /* End Of File counter (play only) */
48
49	unsigned char pause; /* non-zero for pause, zero to resume */
50	unsigned char error; /* non-zero if overflow/underflow */
51	unsigned char waiting; /* non-zero if a process wants access */
52	unsigned char balance; /* stereo channel balance */
53
54	unsigned short minordev;
55
56	/*
57	* The following values are read-only state flags
58	*/
59	unsigned char open; /* non-zero if open access permitted */
60	unsigned char active; /* non-zero if I/O is active */
61	} audio_prinfo_t;
62
63
64	/*
65	* This structure describes the current state of the audio device.
66	*/
67	typedef struct audio_info {
68	/*
69	* Per-stream information
70	*/
71	audio_prinfo_t play; /* output status information */
72	audio_prinfo_t record; /* input status information */
73
74	/*
75	* Per-unit/channel information
76	*/
77	unsigned int monitor_gain; /* input to output mix: 0 - 255 */
78	unsigned char output_muted; /* non-zero if output is muted */
79	unsigned char _xxx[3]; /* Reserved for future use */
80	unsigned int _yyy[3]; /* Reserved for future use */
81	} audio_info_t;
82
83
84	/*
85	* Audio encoding types
86	*/
87	#define AUDIO_ENCODING_NONE (0) /* no encoding assigned */
88	#define AUDIO_ENCODING_ULAW (1) /* u-law encoding */
89	#define AUDIO_ENCODING_ALAW (2) /* A-law encoding */
90	#define AUDIO_ENCODING_LINEAR (3) /* Linear PCM encoding */
91	#define AUDIO_ENCODING_FLOAT (4) /* IEEE float (-1. <-> +1.) */
92	#define AUDIO_ENCODING_DVI (104) /* DVI ADPCM */
93	#define AUDIO_ENCODING_LINEAR8 (105) /* 8 bit UNSIGNED */
94	#define AUDIO_ENCODING_LINEARLE (106) /* Linear PCM LE encoding */
95
96	/*
97	* These ranges apply to record, play, and monitor gain values
98	*/
99	#define AUDIO_MIN_GAIN (0) /* minimum gain value */
100	#define AUDIO_MAX_GAIN (255) /* maximum gain value */
101
102	/*
103	* These values apply to the balance field to adjust channel gain values
104	*/
105	#define AUDIO_LEFT_BALANCE (0) /* left channel only */
106	#define AUDIO_MID_BALANCE (32) /* equal left/right channel */
107	#define AUDIO_RIGHT_BALANCE (64) /* right channel only */
108	#define AUDIO_BALANCE_SHIFT (3)
109
110	/*
111	* Generic minimum/maximum limits for number of channels, both modes
112	*/
113	#define AUDIO_MIN_PLAY_CHANNELS (1)
114	#define AUDIO_MAX_PLAY_CHANNELS (4)
115	#define AUDIO_MIN_REC_CHANNELS (1)
116	#define AUDIO_MAX_REC_CHANNELS (4)
117
118	/*
119	* Generic minimum/maximum limits for sample precision
120	*/
121	#define AUDIO_MIN_PLAY_PRECISION (8)
122	#define AUDIO_MAX_PLAY_PRECISION (32)
123	#define AUDIO_MIN_REC_PRECISION (8)
124	#define AUDIO_MAX_REC_PRECISION (32)
125
126	/*
127	* Define some convenient names for typical audio ports
128	*/
129	/*
130	* output ports (several may be enabled simultaneously)
131	*/
132	#define AUDIO_SPEAKER 0x01 /* output to built-in speaker */
133	#define AUDIO_HEADPHONE 0x02 /* output to headphone jack */
134	#define AUDIO_LINE_OUT 0x04 /* output to line out */
135
136	/*
137	* input ports (usually only one at a time)
138	*/
139	#define AUDIO_MICROPHONE 0x01 /* input from microphone */
140	#define AUDIO_LINE_IN 0x02 /* input from line in */
141	#define AUDIO_CD 0x04 /* input from on-board CD inputs */
142	#define AUDIO_INTERNAL_CD_IN AUDIO_CD /* input from internal CDROM */
143	#define AUDIO_ANALOG_LOOPBACK 0x40 /* input from output */
144
145
146	/*
147	* This macro initializes an audio_info structure to 'harmless' values.
148	* Note that (~0) might not be a harmless value for a flag that was
149	* a signed int.
150	*/
151	#define AUDIO_INITINFO(i) { \
152	unsigned int *__x__; \
153	for (__x__ = (unsigned int *)(i); \
154	(char ) __x__ < (((char )(i)) + sizeof (audio_info_t)); \
155	*__x__++ = ~0); \
156	}
157
158	/*
159	* These allow testing for what the user wants to set
160	*/
161	#define AUD_INITVALUE (~0)
162	#define Modify(X) ((unsigned int)(X) != AUD_INITVALUE)
163	#define Modifys(X) ((X) != (unsigned short)AUD_INITVALUE)
164	#define Modifyc(X) ((X) != (unsigned char)AUD_INITVALUE)
165
166	/*
167	* Parameter for the AUDIO_GETDEV ioctl to determine current
168	* audio devices.
169	*/
170	#define MAX_AUDIO_DEV_LEN (16)
171	typedef struct audio_device {
172	char name[MAX_AUDIO_DEV_LEN];
173	char version[MAX_AUDIO_DEV_LEN];
174	char config[MAX_AUDIO_DEV_LEN];
175	} audio_device_t;
176
177
178	/*
179	* Ioctl calls for the audio device.
180	*/
181
182	/*
183	* AUDIO_GETINFO retrieves the current state of the audio device.
184	*
185	* AUDIO_SETINFO copies all fields of the audio_info structure whose
186	* values are not set to the initialized value (-1) to the device state.
187	* It performs an implicit AUDIO_GETINFO to return the new state of the
188	* device. Note that the record.samples and play.samples fields are set
189	* to the last value before the AUDIO_SETINFO took effect. This allows
190	* an application to reset the counters while atomically retrieving the
191	* last value.
192	*
193	* AUDIO_DRAIN suspends the calling process until the write buffers are
194	* empty.
195	*
196	* AUDIO_GETDEV returns a structure of type audio_device_t which contains
197	* three strings. The string "name" is a short identifying string (for
198	* example, the SBus Fcode name string), the string "version" identifies
199	* the current version of the device, and the "config" string identifies
200	* the specific configuration of the audio stream. All fields are
201	* device-dependent -- see the device specific manual pages for details.
202	*
203	* AUDIO_GETDEV_SUNOS returns a number which is an audio device defined
204	* herein (making it not too portable)
205	*
206	* AUDIO_FLUSH stops all playback and recording, clears all queued buffers,
207	* resets error counters, and restarts recording and playback as appropriate
208	* for the current sampling mode.
209	*/
210	#define AUDIO_GETINFO _IOR('A', 1, audio_info_t)
211	#define AUDIO_SETINFO _IOWR('A', 2, audio_info_t)
212	#define AUDIO_DRAIN _IO('A', 3)
213	#define AUDIO_GETDEV _IOR('A', 4, audio_device_t)
214	#define AUDIO_GETDEV_SUNOS _IOR('A', 4, int)
215	#define AUDIO_FLUSH _IO('A', 5)
216
217	/* Define possible audio hardware configurations for
218	* old SunOS-style AUDIO_GETDEV ioctl */
219	#define AUDIO_DEV_UNKNOWN (0) /* not defined */
220	#define AUDIO_DEV_AMD (1) /* audioamd device */
221	#define AUDIO_DEV_SPEAKERBOX (2) /* dbri device with speakerbox */
222	#define AUDIO_DEV_CODEC (3) /* dbri device (internal speaker) */
223	#define AUDIO_DEV_CS4231 (5) /* cs4231 device */
224
225	/*
226	* The following ioctl sets the audio device into an internal loopback mode,
227	* if the hardware supports this. The argument is TRUE to set loopback,
228	* FALSE to reset to normal operation. If the hardware does not support
229	* internal loopback, the ioctl should fail with EINVAL.
230	* Causes ADC data to be digitally mixed in and sent to the DAC.
231	*/
232	#define AUDIO_DIAG_LOOPBACK _IOW('A', 101, int)
233
234	#endif /* _AUDIOIO_H_ */