1 files changed, 0 insertions, 107 deletions

diff --git a/include/asm-sparc/timer_32.h b/include/asm-sparc/timer_32.h
deleted file mode 100644
index 361e53898dd7..000000000000
--- a/include/asm-sparc/timer_32.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * timer.h:  Definitions for the timer chips on the Sparc.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-
-#ifndef _SPARC_TIMER_H
-#define _SPARC_TIMER_H
-
-#include <asm/system.h>  /* For SUN4M_NCPUS */
-#include <asm/sun4paddr.h>
-#include <asm/btfixup.h>
-
-/* Timer structures. The interrupt timer has two properties which
- * are the counter (which is handled in do_timer in sched.c) and the limit.
- * This limit is where the timer's counter 'wraps' around. Oddly enough,
- * the sun4c timer when it hits the limit wraps back to 1 and not zero
- * thus when calculating the value at which it will fire a microsecond you
- * must adjust by one.  Thanks SUN for designing such great hardware ;(
- */
-
-/* Note that I am only going to use the timer that interrupts at
- * Sparc IRQ 10.  There is another one available that can fire at
- * IRQ 14. Currently it is left untouched, we keep the PROM's limit
- * register value and let the prom take these interrupts.  This allows
- * L1-A to work.
- */
-
-struct sun4c_timer_info {
-  __volatile__ unsigned int cur_count10;
-  __volatile__ unsigned int timer_limit10;
-  __volatile__ unsigned int cur_count14;
-  __volatile__ unsigned int timer_limit14;
-};
-
-#define SUN4C_TIMER_PHYSADDR   0xf3000000
-#ifdef CONFIG_SUN4
-#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
-#else
-#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
-#endif
-
-/* A sun4m has two blocks of registers which are probably of the same
- * structure. LSI Logic's L64851 is told to _decrement_ from the limit
- * value. Aurora behaves similarly but its limit value is compacted in
- * other fashion (it's wider). Documented fields are defined here.
- */
-
-/* As with the interrupt register, we have two classes of timer registers
- * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
- * only level 14 ticks, master timer hits all cpus and is level 10.
- */
-
-#define SUN4M_PRM_CNT_L       0x80000000
-#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
-
-struct sun4m_timer_percpu_info {
-  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
-  __volatile__ unsigned int l14_cur_count;
-
-  /* This register appears to be write only and/or inaccessible
-   * on Uni-Processor sun4m machines.
-   */
-  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
-
-  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
-  __volatile__ unsigned char space[PAGE_SIZE - 16];
-};
-
-struct sun4m_timer_regs {
-        struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
-        volatile unsigned int l10_timer_limit;
-        volatile unsigned int l10_cur_count;
-
-        /* Again, this appears to be write only and/or inaccessible
-         * on uni-processor sun4m machines.
-         */
-        volatile unsigned int l10_limit_noclear;
-
-        /* This register too, it must be magic. */
-        volatile unsigned int foobar;
-
-        volatile unsigned int cfg;     /* equals zero at boot time... */
-};
-
-#define SUN4D_PRM_CNT_L       0x80000000
-#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
-
-struct sun4d_timer_regs {
-        volatile unsigned int l10_timer_limit;
-        volatile unsigned int l10_cur_countx;
-        volatile unsigned int l10_limit_noclear;
-        volatile unsigned int ctrl;
-        volatile unsigned int l10_cur_count;
-};
-
-extern struct sun4d_timer_regs *sun4d_timers;
-
-extern __volatile__ unsigned int *master_l10_counter;
-extern __volatile__ unsigned int *master_l10_limit;
-
-/* FIXME: Make do_[gs]ettimeofday btfixup calls */
-BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
-#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
-
-#endif /* !(_SPARC_TIMER_H) */