aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-sparc/sunbpp.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc/sunbpp.h')
-rw-r--r--include/asm-sparc/sunbpp.h80
1 files changed, 80 insertions, 0 deletions
diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h
new file mode 100644
index 000000000000..568db79b730d
--- /dev/null
+++ b/include/asm-sparc/sunbpp.h
@@ -0,0 +1,80 @@
1/* $Id: sunbpp.h,v 1.1 1999/08/08 14:09:49 shadow Exp $
2 * include/asm-sparc/sunbpp.h
3 */
4
5#ifndef _ASM_SPARC_SUNBPP_H
6#define _ASM_SPARC_SUNBPP_H
7
8struct bpp_regs {
9 /* DMA registers */
10 __volatile__ __u32 p_csr; /* DMA Control/Status Register */
11 __volatile__ __u32 p_addr; /* Address Register */
12 __volatile__ __u32 p_bcnt; /* Byte Count Register */
13 __volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */
14 /* Parallel Port registers */
15 __volatile__ __u16 p_hcr; /* Hardware Configuration Register */
16 __volatile__ __u16 p_ocr; /* Operation Configuration Register */
17 __volatile__ __u8 p_dr; /* Parallel Data Register */
18 __volatile__ __u8 p_tcr; /* Transfer Control Register */
19 __volatile__ __u8 p_or; /* Output Register */
20 __volatile__ __u8 p_ir; /* Input Register */
21 __volatile__ __u16 p_icr; /* Interrupt Control Register */
22};
23
24/* P_HCR. Time is in increments of SBus clock. */
25#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */
26#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */
27#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */
28
29/* P_OCR. */
30#define P_OCR_MEM_CLR 0x8000
31#define P_OCR_DATA_SRC 0x4000 /* ) */
32#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */
33#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */
34#define P_OCR_ACK_DSEL 0x0800 /* ) */
35#define P_OCR_EN_DIAG 0x0400
36#define P_OCR_BUSY_OP 0x0200 /* Busy operation */
37#define P_OCR_ACK_OP 0x0100 /* Ack operation */
38#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */
39#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */
40#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */
41#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */
42
43/* P_TCR */
44#define P_TCR_DIR 0x08
45#define P_TCR_BUSY 0x04
46#define P_TCR_ACK 0x02
47#define P_TCR_DS 0x01 /* Strobe */
48
49/* P_OR */
50#define P_OR_V3 0x20 /* ) */
51#define P_OR_V2 0x10 /* ) on Zebra only */
52#define P_OR_V1 0x08 /* ) */
53#define P_OR_INIT 0x04
54#define P_OR_AFXN 0x02 /* Auto Feed */
55#define P_OR_SLCT_IN 0x01
56
57/* P_IR */
58#define P_IR_PE 0x04
59#define P_IR_SLCT 0x02
60#define P_IR_ERR 0x01
61
62/* P_ICR */
63#define P_DS_IRQ 0x8000 /* RW1 */
64#define P_ACK_IRQ 0x4000 /* RW1 */
65#define P_BUSY_IRQ 0x2000 /* RW1 */
66#define P_PE_IRQ 0x1000 /* RW1 */
67#define P_SLCT_IRQ 0x0800 /* RW1 */
68#define P_ERR_IRQ 0x0400 /* RW1 */
69#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */
70#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */
71#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */
72#define P_BUSY_IRQ_EN 0x0040 /* RW */
73#define P_PE_IRP 0x0020 /* RW 1= rising edge */
74#define P_PE_IRQ_EN 0x0010 /* RW */
75#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */
76#define P_SLCT_IRQ_EN 0x0004 /* RW */
77#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */
78#define P_ERR_IRQ_EN 0x0001 /* RW */
79
80#endif /* !(_ASM_SPARC_SUNBPP_H) */