1 files changed, 0 insertions, 136 deletions

diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h
index ff520ea97473..45827934f7bc 100644
--- a/include/asm-sparc/irq.h
+++ b/include/asm-sparc/irq.h
@@ -14,9 +14,6 @@
 #include <asm/system.h>     /* For SUN4M_NCPUS */
 #include <asm/btfixup.h>
 
-#define __irq_ino(irq) irq
-#define __irq_pil(irq) irq
-
 #define NR_IRQS    16
 
 #define irq_canonicalize(irq)   (irq)
@@ -30,11 +27,6 @@
  */
 BTFIXUPDEF_CALL(void, disable_irq, unsigned int)
 BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
-BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
-BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
-BTFIXUPDEF_CALL(void, clear_clock_irq, void)
-BTFIXUPDEF_CALL(void, clear_profile_irq, int)
-BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
 
 static inline void disable_irq_nosync(unsigned int irq)
 {
@@ -51,134 +43,6 @@ static inline void enable_irq(unsigned int irq)
         BTFIXUP_CALL(enable_irq)(irq);
 }
 
-static inline void disable_pil_irq(unsigned int irq)
-{
-        BTFIXUP_CALL(disable_pil_irq)(irq);
-}
-
-static inline void enable_pil_irq(unsigned int irq)
-{
-        BTFIXUP_CALL(enable_pil_irq)(irq);
-}
-
-static inline void clear_clock_irq(void)
-{
-        BTFIXUP_CALL(clear_clock_irq)();
-}
-
-static inline void clear_profile_irq(int irq)
-{
-        BTFIXUP_CALL(clear_profile_irq)(irq);
-}
-
-static inline void load_profile_irq(int cpu, int limit)
-{
-        BTFIXUP_CALL(load_profile_irq)(cpu, limit);
-}
-
-extern void (*sparc_init_timers)(irq_handler_t lvl10_irq);
-extern void claim_ticker14(irq_handler_t irq_handler,
-                           int irq,
-                           unsigned int timeout);
-
-#ifdef CONFIG_SMP
-BTFIXUPDEF_CALL(void, set_cpu_int, int, int)
-BTFIXUPDEF_CALL(void, clear_cpu_int, int, int)
-BTFIXUPDEF_CALL(void, set_irq_udt, int)
-
-#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level)
-#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level)
-#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
-#endif
-
 extern int request_fast_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, __const__ char *devname);
 
-/* On the sun4m, just like the timers, we have both per-cpu and master
- * interrupt registers.
- */
-
-/* These registers are used for sending/receiving irqs from/to
- * different cpu's.
- */
-struct sun4m_intreg_percpu {
-        unsigned int tbt;        /* Interrupts still pending for this cpu. */
-
-        /* These next two registers are WRITE-ONLY and are only
-         * "on bit" sensitive, "off bits" written have NO affect.
-         */
-        unsigned int clear;  /* Clear this cpus irqs here. */
-        unsigned int set;    /* Set this cpus irqs here. */
-        unsigned char space[PAGE_SIZE - 12];
-};
-
-/*
- * djhr
- * Actually the clear and set fields in this struct are misleading..
- * according to the SLAVIO manual (and the same applies for the SEC)
- * the clear field clears bits in the mask which will ENABLE that IRQ
- * the set field sets bits in the mask to DISABLE the IRQ.
- *
- * Also the undirected_xx address in the SLAVIO is defined as
- * RESERVED and write only..
- *
- * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
- *             sun4m machines, for MP the layout makes more sense.
- */
-struct sun4m_intregs {
-        struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
-        unsigned int tbt;                /* IRQ's that are still pending. */
-        unsigned int irqs;               /* Master IRQ bits. */
-
-        /* Again, like the above, two these registers are WRITE-ONLY. */
-        unsigned int clear;              /* Clear master IRQ's by setting bits here. */
-        unsigned int set;                /* Set master IRQ's by setting bits here. */
-
-        /* This register is both READ and WRITE. */
-        unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
-};
-
-extern struct sun4m_intregs *sun4m_interrupts;
-
-/* 
- * Bit field defines for the interrupt registers on various
- * Sparc machines.
- */
-
-/* The sun4c interrupt register. */
-#define SUN4C_INT_ENABLE  0x01     /* Allow interrupts. */
-#define SUN4C_INT_E14     0x80     /* Enable level 14 IRQ. */
-#define SUN4C_INT_E10     0x20     /* Enable level 10 IRQ. */
-#define SUN4C_INT_E8      0x10     /* Enable level 8 IRQ. */
-#define SUN4C_INT_E6      0x08     /* Enable level 6 IRQ. */
-#define SUN4C_INT_E4      0x04     /* Enable level 4 IRQ. */
-#define SUN4C_INT_E1      0x02     /* Enable level 1 IRQ. */
-
-/* Dave Redman (djhr@tadpole.co.uk)
- * The sun4m interrupt registers.
- */
-#define SUN4M_INT_ENABLE        0x80000000
-#define SUN4M_INT_E14           0x00000080
-#define SUN4M_INT_E10           0x00080000
-
-#define SUN4M_HARD_INT(x)       (0x000000001 << (x))
-#define SUN4M_SOFT_INT(x)       (0x000010000 << (x))
-
-#define SUN4M_INT_MASKALL       0x80000000        /* mask all interrupts */
-#define SUN4M_INT_MODULE_ERR    0x40000000        /* module error */
-#define SUN4M_INT_M2S_WRITE     0x20000000        /* write buffer error */
-#define SUN4M_INT_ECC           0x10000000        /* ecc memory error */
-#define SUN4M_INT_FLOPPY        0x00400000        /* floppy disk */
-#define SUN4M_INT_MODULE        0x00200000        /* module interrupt */
-#define SUN4M_INT_VIDEO         0x00100000        /* onboard video */
-#define SUN4M_INT_REALTIME      0x00080000        /* system timer */
-#define SUN4M_INT_SCSI          0x00040000        /* onboard scsi */
-#define SUN4M_INT_AUDIO         0x00020000        /* audio/isdn */
-#define SUN4M_INT_ETHERNET      0x00010000        /* onboard ethernet */
-#define SUN4M_INT_SERIAL        0x00008000        /* serial ports */
-#define SUN4M_INT_KBDMS         0x00004000        /* keyboard/mouse */
-#define SUN4M_INT_SBUSBITS      0x00003F80        /* sbus int bits */
-
-#define SUN4M_INT_SBUS(x)       (1 << (x+7))
-#define SUN4M_INT_VME(x)        (1 << (x))
-
 #endif