diff options
Diffstat (limited to 'include/asm-sh/mpc1211/m1543c.h')
-rw-r--r-- | include/asm-sh/mpc1211/m1543c.h | 200 |
1 files changed, 0 insertions, 200 deletions
diff --git a/include/asm-sh/mpc1211/m1543c.h b/include/asm-sh/mpc1211/m1543c.h deleted file mode 100644 index c95d13236c3b..000000000000 --- a/include/asm-sh/mpc1211/m1543c.h +++ /dev/null | |||
@@ -1,200 +0,0 @@ | |||
1 | #ifndef __ASM_SH_M1543C_H | ||
2 | #define __ASM_SH_M1543C_H | ||
3 | |||
4 | /* | ||
5 | * linux/include/asm-sh/m1543c.h | ||
6 | * Copyright (C) 2001 Nobuhiro Sakawa | ||
7 | * M1543C:PCI-ISA Bus Bridge with Super IO Chip support | ||
8 | * | ||
9 | * from | ||
10 | * | ||
11 | * linux/include/asm-sh/smc37c93x.h | ||
12 | * | ||
13 | * Copyright (C) 2000 Kazumoto Kojima | ||
14 | * | ||
15 | * SMSC 37C93x Super IO Chip support | ||
16 | */ | ||
17 | |||
18 | /* Default base I/O address */ | ||
19 | #define FDC_PRIMARY_BASE 0x3f0 | ||
20 | #define IDE1_PRIMARY_BASE 0x1f0 | ||
21 | #define IDE1_SECONDARY_BASE 0x170 | ||
22 | #define PARPORT_PRIMARY_BASE 0x378 | ||
23 | #define COM1_PRIMARY_BASE 0x2f8 | ||
24 | #define COM2_PRIMARY_BASE 0x3f8 | ||
25 | #define COM3_PRIMARY_BASE 0x3e8 | ||
26 | #define RTC_PRIMARY_BASE 0x070 | ||
27 | #define KBC_PRIMARY_BASE 0x060 | ||
28 | #define AUXIO_PRIMARY_BASE 0x000 /* XXX */ | ||
29 | #define I8259_M_CR 0x20 | ||
30 | #define I8259_M_MR 0x21 | ||
31 | #define I8259_S_CR 0xa0 | ||
32 | #define I8259_S_MR 0xa1 | ||
33 | |||
34 | /* Logical device number */ | ||
35 | #define LDN_FDC 0 | ||
36 | #define LDN_IDE1 1 | ||
37 | #define LDN_IDE2 2 | ||
38 | #define LDN_PARPORT 3 | ||
39 | #define LDN_COM1 4 | ||
40 | #define LDN_COM2 5 | ||
41 | #define LDN_COM3 11 | ||
42 | #define LDN_RTC 6 | ||
43 | #define LDN_KBC 7 | ||
44 | |||
45 | /* Configuration port and key */ | ||
46 | #define CONFIG_PORT 0x3f0 | ||
47 | #define INDEX_PORT CONFIG_PORT | ||
48 | #define DATA_PORT 0x3f1 | ||
49 | #define CONFIG_ENTER1 0x51 | ||
50 | #define CONFIG_ENTER2 0x23 | ||
51 | #define CONFIG_EXIT 0xbb | ||
52 | |||
53 | /* Configuration index */ | ||
54 | #define CURRENT_LDN_INDEX 0x07 | ||
55 | #define POWER_CONTROL_INDEX 0x22 | ||
56 | #define ACTIVATE_INDEX 0x30 | ||
57 | #define IO_BASE_HI_INDEX 0x60 | ||
58 | #define IO_BASE_LO_INDEX 0x61 | ||
59 | #define IRQ_SELECT_INDEX 0x70 | ||
60 | #define PS2_IRQ_INDEX 0x72 | ||
61 | #define DMA_SELECT_INDEX 0x74 | ||
62 | |||
63 | /* UART stuff. Only for debugging. */ | ||
64 | /* UART Register */ | ||
65 | |||
66 | #define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ | ||
67 | #define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ | ||
68 | #define UART_IER 0x2 /* Interrupt Enable Register */ | ||
69 | #define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ | ||
70 | #define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ | ||
71 | #define UART_LCR 0x6 /* Line Control Register */ | ||
72 | #define UART_MCR 0x8 /* MODEM Control Register */ | ||
73 | #define UART_LSR 0xa /* Line Status Register */ | ||
74 | #define UART_MSR 0xc /* MODEM Status Register */ | ||
75 | #define UART_SCR 0xe /* Scratch Register */ | ||
76 | #define UART_DLL 0x0 /* Divisor Latch (LS) */ | ||
77 | #define UART_DLM 0x2 /* Divisor Latch (MS) */ | ||
78 | |||
79 | #ifndef __ASSEMBLY__ | ||
80 | typedef struct uart_reg { | ||
81 | volatile __u16 rbr; | ||
82 | volatile __u16 ier; | ||
83 | volatile __u16 iir; | ||
84 | volatile __u16 lcr; | ||
85 | volatile __u16 mcr; | ||
86 | volatile __u16 lsr; | ||
87 | volatile __u16 msr; | ||
88 | volatile __u16 scr; | ||
89 | } uart_reg; | ||
90 | #endif /* ! __ASSEMBLY__ */ | ||
91 | |||
92 | /* Alias for Write Only Register */ | ||
93 | |||
94 | #define thr rbr | ||
95 | #define tcr iir | ||
96 | |||
97 | /* Alias for Divisor Latch Register */ | ||
98 | |||
99 | #define dll rbr | ||
100 | #define dlm ier | ||
101 | #define fcr iir | ||
102 | |||
103 | /* Interrupt Enable Register */ | ||
104 | |||
105 | #define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ | ||
106 | #define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ | ||
107 | #define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ | ||
108 | #define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ | ||
109 | |||
110 | /* Interrupt Ident Register */ | ||
111 | |||
112 | #define IIR_IP 0x0100 /* "0" if Interrupt Pending */ | ||
113 | #define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ | ||
114 | #define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ | ||
115 | #define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ | ||
116 | #define IIR_FIFO 0xc000 /* FIFOs enabled */ | ||
117 | |||
118 | /* FIFO Control Register */ | ||
119 | |||
120 | #define FCR_FEN 0x0100 /* FIFO enable */ | ||
121 | #define FCR_RFRES 0x0200 /* Receiver FIFO reset */ | ||
122 | #define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ | ||
123 | #define FCR_DMA 0x0800 /* DMA mode select */ | ||
124 | #define FCR_RTL 0x4000 /* Receiver triger (LSB) */ | ||
125 | #define FCR_RTM 0x8000 /* Receiver triger (MSB) */ | ||
126 | |||
127 | /* Line Control Register */ | ||
128 | |||
129 | #define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ | ||
130 | #define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ | ||
131 | #define LCR_STB 0x0400 /* Number of Stop Bits */ | ||
132 | #define LCR_PEN 0x0800 /* Parity Enable */ | ||
133 | #define LCR_EPS 0x1000 /* Even Parity Select */ | ||
134 | #define LCR_SP 0x2000 /* Stick Parity */ | ||
135 | #define LCR_SB 0x4000 /* Set Break */ | ||
136 | #define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ | ||
137 | |||
138 | /* MODEM Control Register */ | ||
139 | |||
140 | #define MCR_DTR 0x0100 /* Data Terminal Ready */ | ||
141 | #define MCR_RTS 0x0200 /* Request to Send */ | ||
142 | #define MCR_OUT1 0x0400 /* Out 1 */ | ||
143 | #define MCR_IRQEN 0x0800 /* IRQ Enable */ | ||
144 | #define MCR_LOOP 0x1000 /* Loop */ | ||
145 | |||
146 | /* Line Status Register */ | ||
147 | |||
148 | #define LSR_DR 0x0100 /* Data Ready */ | ||
149 | #define LSR_OE 0x0200 /* Overrun Error */ | ||
150 | #define LSR_PE 0x0400 /* Parity Error */ | ||
151 | #define LSR_FE 0x0800 /* Framing Error */ | ||
152 | #define LSR_BI 0x1000 /* Break Interrupt */ | ||
153 | #define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ | ||
154 | #define LSR_TEMT 0x4000 /* Transmitter Empty */ | ||
155 | #define LSR_FIFOE 0x8000 /* Receiver FIFO error */ | ||
156 | |||
157 | /* MODEM Status Register */ | ||
158 | |||
159 | #define MSR_DCTS 0x0100 /* Delta Clear to Send */ | ||
160 | #define MSR_DDSR 0x0200 /* Delta Data Set Ready */ | ||
161 | #define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ | ||
162 | #define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ | ||
163 | #define MSR_CTS 0x1000 /* Clear to Send */ | ||
164 | #define MSR_DSR 0x2000 /* Data Set Ready */ | ||
165 | #define MSR_RI 0x4000 /* Ring Indicator */ | ||
166 | #define MSR_DCD 0x8000 /* Data Carrier Detect */ | ||
167 | |||
168 | /* Baud Rate Divisor */ | ||
169 | |||
170 | #define UART_CLK (1843200) /* 1.8432 MHz */ | ||
171 | #define UART_BAUD(x) (UART_CLK / (16 * (x))) | ||
172 | |||
173 | /* RTC register definition */ | ||
174 | #define RTC_SECONDS 0 | ||
175 | #define RTC_SECONDS_ALARM 1 | ||
176 | #define RTC_MINUTES 2 | ||
177 | #define RTC_MINUTES_ALARM 3 | ||
178 | #define RTC_HOURS 4 | ||
179 | #define RTC_HOURS_ALARM 5 | ||
180 | #define RTC_DAY_OF_WEEK 6 | ||
181 | #define RTC_DAY_OF_MONTH 7 | ||
182 | #define RTC_MONTH 8 | ||
183 | #define RTC_YEAR 9 | ||
184 | #define RTC_FREQ_SELECT 10 | ||
185 | # define RTC_UIP 0x80 | ||
186 | # define RTC_DIV_CTL 0x70 | ||
187 | /* This RTC can work under 32.768KHz clock only. */ | ||
188 | # define RTC_OSC_ENABLE 0x20 | ||
189 | # define RTC_OSC_DISABLE 0x00 | ||
190 | #define RTC_CONTROL 11 | ||
191 | # define RTC_SET 0x80 | ||
192 | # define RTC_PIE 0x40 | ||
193 | # define RTC_AIE 0x20 | ||
194 | # define RTC_UIE 0x10 | ||
195 | # define RTC_SQWE 0x08 | ||
196 | # define RTC_DM_BINARY 0x04 | ||
197 | # define RTC_24H 0x02 | ||
198 | # define RTC_DST_EN 0x01 | ||
199 | |||
200 | #endif /* __ASM_SH_M1543C_H */ | ||