aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/ucc_slow.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-powerpc/ucc_slow.h')
-rw-r--r--include/asm-powerpc/ucc_slow.h289
1 files changed, 289 insertions, 0 deletions
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
new file mode 100644
index 000000000000..ca93bc99237e
--- /dev/null
+++ b/include/asm-powerpc/ucc_slow.h
@@ -0,0 +1,289 @@
1/*
2 * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
3 *
4 * Authors: Shlomi Gridish <gridish@freescale.com>
5 * Li Yang <leoli@freescale.com>
6 *
7 * Description:
8 * Internal header file for UCC SLOW unit routines.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
15#ifndef __UCC_SLOW_H__
16#define __UCC_SLOW_H__
17
18#include <linux/kernel.h>
19
20#include <asm/immap_qe.h>
21#include <asm/qe.h>
22
23#include "ucc.h"
24
25/* transmit BD's status */
26#define T_R 0x80000000 /* ready bit */
27#define T_PAD 0x40000000 /* add pads to short frames */
28#define T_W 0x20000000 /* wrap bit */
29#define T_I 0x10000000 /* interrupt on completion */
30#define T_L 0x08000000 /* last */
31
32#define T_A 0x04000000 /* Address - the data transmitted as address
33 chars */
34#define T_TC 0x04000000 /* transmit CRC */
35#define T_CM 0x02000000 /* continuous mode */
36#define T_DEF 0x02000000 /* collision on previous attempt to transmit */
37#define T_P 0x01000000 /* Preamble - send Preamble sequence before
38 data */
39#define T_HB 0x01000000 /* heartbeat */
40#define T_NS 0x00800000 /* No Stop */
41#define T_LC 0x00800000 /* late collision */
42#define T_RL 0x00400000 /* retransmission limit */
43#define T_UN 0x00020000 /* underrun */
44#define T_CT 0x00010000 /* CTS lost */
45#define T_CSL 0x00010000 /* carrier sense lost */
46#define T_RC 0x003c0000 /* retry count */
47
48/* Receive BD's status */
49#define R_E 0x80000000 /* buffer empty */
50#define R_W 0x20000000 /* wrap bit */
51#define R_I 0x10000000 /* interrupt on reception */
52#define R_L 0x08000000 /* last */
53#define R_C 0x08000000 /* the last byte in this buffer is a cntl
54 char */
55#define R_F 0x04000000 /* first */
56#define R_A 0x04000000 /* the first byte in this buffer is address
57 byte */
58#define R_CM 0x02000000 /* continuous mode */
59#define R_ID 0x01000000 /* buffer close on reception of idles */
60#define R_M 0x01000000 /* Frame received because of promiscuous
61 mode */
62#define R_AM 0x00800000 /* Address match */
63#define R_DE 0x00800000 /* Address match */
64#define R_LG 0x00200000 /* Break received */
65#define R_BR 0x00200000 /* Frame length violation */
66#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
67#define R_FR 0x00100000 /* Framing Error (no stop bit) character
68 received */
69#define R_PR 0x00080000 /* Parity Error character received */
70#define R_AB 0x00080000 /* Frame Aborted */
71#define R_SH 0x00080000 /* frame is too short */
72#define R_CR 0x00040000 /* CRC Error */
73#define R_OV 0x00020000 /* Overrun */
74#define R_CD 0x00010000 /* CD lost */
75#define R_CL 0x00010000 /* this frame is closed because of a
76 collision */
77
78/* Rx Data buffer must be 4 bytes aligned in most cases.*/
79#define UCC_SLOW_RX_ALIGN 4
80#define UCC_SLOW_MRBLR_ALIGNMENT 4
81#define UCC_SLOW_PRAM_SIZE 0x100
82#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
83
84/* UCC Slow Channel Protocol Mode */
85enum ucc_slow_channel_protocol_mode {
86 UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
87 UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
88 UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
89};
90
91/* UCC Slow Transparent Transmit CRC (TCRC) */
92enum ucc_slow_transparent_tcrc {
93 /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */
94 UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
95 /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */
96 UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
97 /* 32-bit CCITT CRC (Ethernet and HDLC) */
98 UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
99};
100
101/* UCC Slow oversampling rate for transmitter (TDCR) */
102enum ucc_slow_tx_oversampling_rate {
103 /* 1x clock mode */
104 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
105 /* 8x clock mode */
106 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
107 /* 16x clock mode */
108 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
109 /* 32x clock mode */
110 UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
111};
112
113/* UCC Slow Oversampling rate for receiver (RDCR)
114*/
115enum ucc_slow_rx_oversampling_rate {
116 /* 1x clock mode */
117 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
118 /* 8x clock mode */
119 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
120 /* 16x clock mode */
121 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
122 /* 32x clock mode */
123 UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
124};
125
126/* UCC Slow Transmitter encoding method (TENC)
127*/
128enum ucc_slow_tx_encoding_method {
129 UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
130 UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
131};
132
133/* UCC Slow Receiver decoding method (RENC)
134*/
135enum ucc_slow_rx_decoding_method {
136 UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
137 UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
138};
139
140/* UCC Slow Diagnostic mode (DIAG)
141*/
142enum ucc_slow_diag_mode {
143 UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
144 UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
145 UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
146 UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
147};
148
149struct ucc_slow_info {
150 int ucc_num;
151 enum qe_clock rx_clock;
152 enum qe_clock tx_clock;
153 struct ucc_slow *us_regs;
154 int irq;
155 u16 uccm_mask;
156 int data_mem_part;
157 int init_tx;
158 int init_rx;
159 u32 tx_bd_ring_len;
160 u32 rx_bd_ring_len;
161 int rx_interrupts;
162 int brkpt_support;
163 int grant_support;
164 int tsa;
165 int cdp;
166 int cds;
167 int ctsp;
168 int ctss;
169 int rinv;
170 int tinv;
171 int rtsm;
172 int rfw;
173 int tci;
174 int tend;
175 int tfl;
176 int txsy;
177 u16 max_rx_buf_length;
178 enum ucc_slow_transparent_tcrc tcrc;
179 enum ucc_slow_channel_protocol_mode mode;
180 enum ucc_slow_diag_mode diag;
181 enum ucc_slow_tx_oversampling_rate tdcr;
182 enum ucc_slow_rx_oversampling_rate rdcr;
183 enum ucc_slow_tx_encoding_method tenc;
184 enum ucc_slow_rx_decoding_method renc;
185};
186
187struct ucc_slow_private {
188 struct ucc_slow_info *us_info;
189 struct ucc_slow *us_regs; /* a pointer to memory map of UCC regs */
190 struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
191 u32 us_pram_offset;
192 int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
193 int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
194 int stopped_tx; /* Whether channel has been stopped for Tx
195 (STOP_TX, etc.) */
196 int stopped_rx; /* Whether channel has been stopped for Rx */
197 struct list_head confQ; /* frames passed to chip waiting for tx */
198 u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
199 and length for first BD in a frame */
200 u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
201 u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
202 u8 *confBd; /* next BD for confirm after Tx */
203 u8 *tx_bd; /* next BD for new Tx request */
204 u8 *rx_bd; /* next BD to collect after Rx */
205 void *p_rx_frame; /* accumulating receive frame */
206 u16 *p_ucce; /* a pointer to the event register in memory.
207 */
208 u16 *p_uccm; /* a pointer to the mask register in memory */
209 u16 saved_uccm; /* a saved mask for the RX Interrupt bits */
210#ifdef STATISTICS
211 u32 tx_frames; /* Transmitted frames counters */
212 u32 rx_frames; /* Received frames counters (only frames
213 passed to application) */
214 u32 rx_discarded; /* Discarded frames counters (frames that
215 were discarded by the driver due to
216 errors) */
217#endif /* STATISTICS */
218};
219
220/* ucc_slow_init
221 * Initializes Slow UCC according to provided parameters.
222 *
223 * us_info - (In) pointer to the slow UCC info structure.
224 * uccs_ret - (Out) pointer to the slow UCC structure.
225 */
226int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
227
228/* ucc_slow_free
229 * Frees all resources for slow UCC.
230 *
231 * uccs - (In) pointer to the slow UCC structure.
232 */
233void ucc_slow_free(struct ucc_slow_private * uccs);
234
235/* ucc_slow_enable
236 * Enables a fast UCC port.
237 * This routine enables Tx and/or Rx through the General UCC Mode Register.
238 *
239 * uccs - (In) pointer to the slow UCC structure.
240 * mode - (In) TX, RX, or both.
241 */
242void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
243
244/* ucc_slow_disable
245 * Disables a fast UCC port.
246 * This routine disables Tx and/or Rx through the General UCC Mode Register.
247 *
248 * uccs - (In) pointer to the slow UCC structure.
249 * mode - (In) TX, RX, or both.
250 */
251void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
252
253/* ucc_slow_poll_transmitter_now
254 * Immediately forces a poll of the transmitter for data to be sent.
255 * Typically, the hardware performs a periodic poll for data that the
256 * transmit routine has set up to be transmitted. In cases where
257 * this polling cycle is not soon enough, this optional routine can
258 * be invoked to force a poll right away, instead. Proper use for
259 * each transmission for which this functionality is desired is to
260 * call the transmit routine and then this routine right after.
261 *
262 * uccs - (In) pointer to the slow UCC structure.
263 */
264void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
265
266/* ucc_slow_graceful_stop_tx
267 * Smoothly stops transmission on a specified slow UCC.
268 *
269 * uccs - (In) pointer to the slow UCC structure.
270 */
271void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
272
273/* ucc_slow_stop_tx
274 * Stops transmission on a specified slow UCC.
275 *
276 * uccs - (In) pointer to the slow UCC structure.
277 */
278void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
279
280/* ucc_slow_restart_x
281 * Restarts transmitting on a specified slow UCC.
282 *
283 * uccs - (In) pointer to the slow UCC structure.
284 */
285void ucc_slow_restart_x(struct ucc_slow_private * uccs);
286
287u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
288
289#endif /* __UCC_SLOW_H__ */