aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/pgtable-ppc32.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-powerpc/pgtable-ppc32.h')
-rw-r--r--include/asm-powerpc/pgtable-ppc32.h802
1 files changed, 0 insertions, 802 deletions
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
deleted file mode 100644
index 6fe39e327047..000000000000
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ /dev/null
@@ -1,802 +0,0 @@
1#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
2#define _ASM_POWERPC_PGTABLE_PPC32_H
3
4#include <asm-generic/pgtable-nopmd.h>
5
6#ifndef __ASSEMBLY__
7#include <linux/sched.h>
8#include <linux/threads.h>
9#include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */
10
11extern unsigned long va_to_phys(unsigned long address);
12extern pte_t *va_to_pte(unsigned long address);
13extern unsigned long ioremap_bot, ioremap_base;
14
15#ifdef CONFIG_44x
16extern int icache_44x_need_flush;
17#endif
18
19#endif /* __ASSEMBLY__ */
20
21/*
22 * The PowerPC MMU uses a hash table containing PTEs, together with
23 * a set of 16 segment registers (on 32-bit implementations), to define
24 * the virtual to physical address mapping.
25 *
26 * We use the hash table as an extended TLB, i.e. a cache of currently
27 * active mappings. We maintain a two-level page table tree, much
28 * like that used by the i386, for the sake of the Linux memory
29 * management code. Low-level assembler code in hashtable.S
30 * (procedure hash_page) is responsible for extracting ptes from the
31 * tree and putting them into the hash table when necessary, and
32 * updating the accessed and modified bits in the page table tree.
33 */
34
35/*
36 * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
37 * We also use the two level tables, but we can put the real bits in them
38 * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
39 * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
40 * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
41 * based upon user/super access. The TLB does not have accessed nor write
42 * protect. We assume that if the TLB get loaded with an entry it is
43 * accessed, and overload the changed bit for write protect. We use
44 * two bits in the software pte that are supposed to be set to zero in
45 * the TLB entry (24 and 25) for these indicators. Although the level 1
46 * descriptor contains the guarded and writethrough/copyback bits, we can
47 * set these at the page level since they get copied from the Mx_TWC
48 * register when the TLB entry is loaded. We will use bit 27 for guard, since
49 * that is where it exists in the MD_TWC, and bit 26 for writethrough.
50 * These will get masked from the level 2 descriptor at TLB load time, and
51 * copied to the MD_TWC before it gets loaded.
52 * Large page sizes added. We currently support two sizes, 4K and 8M.
53 * This also allows a TLB hander optimization because we can directly
54 * load the PMD into MD_TWC. The 8M pages are only used for kernel
55 * mapping of well known areas. The PMD (PGD) entries contain control
56 * flags in addition to the address, so care must be taken that the
57 * software no longer assumes these are only pointers.
58 */
59
60/*
61 * At present, all PowerPC 400-class processors share a similar TLB
62 * architecture. The instruction and data sides share a unified,
63 * 64-entry, fully-associative TLB which is maintained totally under
64 * software control. In addition, the instruction side has a
65 * hardware-managed, 4-entry, fully-associative TLB which serves as a
66 * first level to the shared TLB. These two TLBs are known as the UTLB
67 * and ITLB, respectively (see "mmu.h" for definitions).
68 */
69
70/*
71 * The normal case is that PTEs are 32-bits and we have a 1-page
72 * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
73 *
74 * For any >32-bit physical address platform, we can use the following
75 * two level page table layout where the pgdir is 8KB and the MS 13 bits
76 * are an index to the second level table. The combined pgdir/pmd first
77 * level has 2048 entries and the second level has 512 64-bit PTE entries.
78 * -Matt
79 */
80/* PGDIR_SHIFT determines what a top-level page table entry can map */
81#define PGDIR_SHIFT (PAGE_SHIFT + PTE_SHIFT)
82#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
83#define PGDIR_MASK (~(PGDIR_SIZE-1))
84
85/*
86 * entries per page directory level: our page-table tree is two-level, so
87 * we don't really have any PMD directory.
88 */
89#ifndef __ASSEMBLY__
90#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_SHIFT)
91#define PGD_TABLE_SIZE (sizeof(pgd_t) << (32 - PGDIR_SHIFT))
92#endif /* __ASSEMBLY__ */
93
94#define PTRS_PER_PTE (1 << PTE_SHIFT)
95#define PTRS_PER_PMD 1
96#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
97
98#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
99#define FIRST_USER_ADDRESS 0
100
101#define pte_ERROR(e) \
102 printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
103 (unsigned long long)pte_val(e))
104#define pgd_ERROR(e) \
105 printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
106
107/*
108 * Just any arbitrary offset to the start of the vmalloc VM area: the
109 * current 64MB value just means that there will be a 64MB "hole" after the
110 * physical memory until the kernel virtual memory starts. That means that
111 * any out-of-bounds memory accesses will hopefully be caught.
112 * The vmalloc() routines leaves a hole of 4kB between each vmalloced
113 * area for the same reason. ;)
114 *
115 * We no longer map larger than phys RAM with the BATs so we don't have
116 * to worry about the VMALLOC_OFFSET causing problems. We do have to worry
117 * about clashes between our early calls to ioremap() that start growing down
118 * from ioremap_base being run into the VM area allocations (growing upwards
119 * from VMALLOC_START). For this reason we have ioremap_bot to check when
120 * we actually run into our mappings setup in the early boot with the VM
121 * system. This really does become a problem for machines with good amounts
122 * of RAM. -- Cort
123 */
124#define VMALLOC_OFFSET (0x1000000) /* 16M */
125#ifdef PPC_PIN_SIZE
126#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
127#else
128#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
129#endif
130#define VMALLOC_END ioremap_bot
131
132/*
133 * Bits in a linux-style PTE. These match the bits in the
134 * (hardware-defined) PowerPC PTE as closely as possible.
135 */
136
137#if defined(CONFIG_40x)
138
139/* There are several potential gotchas here. The 40x hardware TLBLO
140 field looks like this:
141
142 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
143 RPN..................... 0 0 EX WR ZSEL....... W I M G
144
145 Where possible we make the Linux PTE bits match up with this
146
147 - bits 20 and 21 must be cleared, because we use 4k pages (40x can
148 support down to 1k pages), this is done in the TLBMiss exception
149 handler.
150 - We use only zones 0 (for kernel pages) and 1 (for user pages)
151 of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
152 miss handler. Bit 27 is PAGE_USER, thus selecting the correct
153 zone.
154 - PRESENT *must* be in the bottom two bits because swap cache
155 entries use the top 30 bits. Because 40x doesn't support SMP
156 anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
157 is cleared in the TLB miss handler before the TLB entry is loaded.
158 - All other bits of the PTE are loaded into TLBLO without
159 modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
160 software PTE bits. We actually use use bits 21, 24, 25, and
161 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
162 PRESENT.
163*/
164
165/* Definitions for 40x embedded chips. */
166#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
167#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
168#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
169#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
170#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
171#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
172#define _PAGE_RW 0x040 /* software: Writes permitted */
173#define _PAGE_DIRTY 0x080 /* software: dirty page */
174#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
175#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
176#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
177
178#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
179#define _PMD_BAD 0x802
180#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
181#define _PMD_SIZE_4M 0x0c0
182#define _PMD_SIZE_16M 0x0e0
183#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
184
185/* Until my rework is finished, 40x still needs atomic PTE updates */
186#define PTE_ATOMIC_UPDATES 1
187
188#elif defined(CONFIG_44x)
189/*
190 * Definitions for PPC440
191 *
192 * Because of the 3 word TLB entries to support 36-bit addressing,
193 * the attribute are difficult to map in such a fashion that they
194 * are easily loaded during exception processing. I decided to
195 * organize the entry so the ERPN is the only portion in the
196 * upper word of the PTE and the attribute bits below are packed
197 * in as sensibly as they can be in the area below a 4KB page size
198 * oriented RPN. This at least makes it easy to load the RPN and
199 * ERPN fields in the TLB. -Matt
200 *
201 * Note that these bits preclude future use of a page size
202 * less than 4KB.
203 *
204 *
205 * PPC 440 core has following TLB attribute fields;
206 *
207 * TLB1:
208 * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
209 * RPN................................. - - - - - - ERPN.......
210 *
211 * TLB2:
212 * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
213 * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
214 *
215 * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
216 * TLB2 storage attibute fields. Those are:
217 *
218 * TLB2:
219 * 0...10 11 12 13 14 15 16...31
220 * no change WL1 IL1I IL1D IL2I IL2D no change
221 *
222 * There are some constrains and options, to decide mapping software bits
223 * into TLB entry.
224 *
225 * - PRESENT *must* be in the bottom three bits because swap cache
226 * entries use the top 29 bits for TLB2.
227 *
228 * - FILE *must* be in the bottom three bits because swap cache
229 * entries use the top 29 bits for TLB2.
230 *
231 * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
232 * doesn't support SMP. So we can use this as software bit, like
233 * DIRTY.
234 *
235 * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
236 * for memory protection related functions (see PTE structure in
237 * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
238 * above bits. Note that the bit values are CPU specific, not architecture
239 * specific.
240 *
241 * The kernel PTE entry holds an arch-dependent swp_entry structure under
242 * certain situations. In other words, in such situations some portion of
243 * the PTE bits are used as a swp_entry. In the PPC implementation, the
244 * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
245 * hold protection values. That means the three protection bits are
246 * reserved for both PTE and SWAP entry at the most significant three
247 * LSBs.
248 *
249 * There are three protection bits available for SWAP entry:
250 * _PAGE_PRESENT
251 * _PAGE_FILE
252 * _PAGE_HASHPTE (if HW has)
253 *
254 * So those three bits have to be inside of 0-2nd LSB of PTE.
255 *
256 */
257
258#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
259#define _PAGE_RW 0x00000002 /* S: Write permission */
260#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
261#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
262#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
263#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
264#define _PAGE_USER 0x00000040 /* S: User page */
265#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
266#define _PAGE_GUARDED 0x00000100 /* H: G bit */
267#define _PAGE_COHERENT 0x00000200 /* H: M bit */
268#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
269#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
270
271/* TODO: Add large page lowmem mapping support */
272#define _PMD_PRESENT 0
273#define _PMD_PRESENT_MASK (PAGE_MASK)
274#define _PMD_BAD (~PAGE_MASK)
275
276/* ERPN in a PTE never gets cleared, ignore it */
277#define _PTE_NONE_MASK 0xffffffff00000000ULL
278
279
280#elif defined(CONFIG_FSL_BOOKE)
281/*
282 MMU Assist Register 3:
283
284 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
285 RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
286
287 - PRESENT *must* be in the bottom three bits because swap cache
288 entries use the top 29 bits.
289
290 - FILE *must* be in the bottom three bits because swap cache
291 entries use the top 29 bits.
292*/
293
294/* Definitions for FSL Book-E Cores */
295#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
296#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
297#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
298#define _PAGE_RW 0x00004 /* S: Write permission (SW) */
299#define _PAGE_DIRTY 0x00008 /* S: Page dirty */
300#define _PAGE_HWEXEC 0x00010 /* H: SX permission */
301#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */
302
303#define _PAGE_ENDIAN 0x00040 /* H: E bit */
304#define _PAGE_GUARDED 0x00080 /* H: G bit */
305#define _PAGE_COHERENT 0x00100 /* H: M bit */
306#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
307#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
308
309#ifdef CONFIG_PTE_64BIT
310/* ERPN in a PTE never gets cleared, ignore it */
311#define _PTE_NONE_MASK 0xffffffffffff0000ULL
312#endif
313
314#define _PMD_PRESENT 0
315#define _PMD_PRESENT_MASK (PAGE_MASK)
316#define _PMD_BAD (~PAGE_MASK)
317
318#elif defined(CONFIG_8xx)
319/* Definitions for 8xx embedded chips. */
320#define _PAGE_PRESENT 0x0001 /* Page is valid */
321#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
322#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
323#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
324
325/* These five software bits must be masked out when the entry is loaded
326 * into the TLB.
327 */
328#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
329#define _PAGE_GUARDED 0x0010 /* software: guarded access */
330#define _PAGE_DIRTY 0x0020 /* software: page changed */
331#define _PAGE_RW 0x0040 /* software: user write access allowed */
332#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
333
334/* Setting any bits in the nibble with the follow two controls will
335 * require a TLB exception handler change. It is assumed unused bits
336 * are always zero.
337 */
338#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
339#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
340
341#define _PMD_PRESENT 0x0001
342#define _PMD_BAD 0x0ff0
343#define _PMD_PAGE_MASK 0x000c
344#define _PMD_PAGE_8M 0x000c
345
346#define _PTE_NONE_MASK _PAGE_ACCESSED
347
348/* Until my rework is finished, 8xx still needs atomic PTE updates */
349#define PTE_ATOMIC_UPDATES 1
350
351#else /* CONFIG_6xx */
352/* Definitions for 60x, 740/750, etc. */
353#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
354#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
355#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
356#define _PAGE_USER 0x004 /* usermode access allowed */
357#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
358#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
359#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
360#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
361#define _PAGE_DIRTY 0x080 /* C: page changed */
362#define _PAGE_ACCESSED 0x100 /* R: page referenced */
363#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
364#define _PAGE_RW 0x400 /* software: user write access allowed */
365
366#define _PTE_NONE_MASK _PAGE_HASHPTE
367
368#define _PMD_PRESENT 0
369#define _PMD_PRESENT_MASK (PAGE_MASK)
370#define _PMD_BAD (~PAGE_MASK)
371
372/* Hash table based platforms need atomic updates of the linux PTE */
373#define PTE_ATOMIC_UPDATES 1
374
375#endif
376
377/*
378 * Some bits are only used on some cpu families...
379 */
380#ifndef _PAGE_HASHPTE
381#define _PAGE_HASHPTE 0
382#endif
383#ifndef _PTE_NONE_MASK
384#define _PTE_NONE_MASK 0
385#endif
386#ifndef _PAGE_SHARED
387#define _PAGE_SHARED 0
388#endif
389#ifndef _PAGE_HWWRITE
390#define _PAGE_HWWRITE 0
391#endif
392#ifndef _PAGE_HWEXEC
393#define _PAGE_HWEXEC 0
394#endif
395#ifndef _PAGE_EXEC
396#define _PAGE_EXEC 0
397#endif
398#ifndef _PAGE_ENDIAN
399#define _PAGE_ENDIAN 0
400#endif
401#ifndef _PAGE_COHERENT
402#define _PAGE_COHERENT 0
403#endif
404#ifndef _PAGE_WRITETHRU
405#define _PAGE_WRITETHRU 0
406#endif
407#ifndef _PMD_PRESENT_MASK
408#define _PMD_PRESENT_MASK _PMD_PRESENT
409#endif
410#ifndef _PMD_SIZE
411#define _PMD_SIZE 0
412#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
413#endif
414
415#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
416
417
418#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
419 _PAGE_WRITETHRU | _PAGE_ENDIAN | \
420 _PAGE_USER | _PAGE_ACCESSED | \
421 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
422 _PAGE_EXEC | _PAGE_HWEXEC)
423/*
424 * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
425 * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
426 * to have it in the Linux PTE, and in fact the bit could be reused for
427 * another purpose. -- paulus.
428 */
429
430#ifdef CONFIG_44x
431#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
432#else
433#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
434#endif
435#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
436#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
437
438#ifdef CONFIG_PPC_STD_MMU
439/* On standard PPC MMU, no user access implies kernel read/write access,
440 * so to write-protect kernel memory we must turn on user access */
441#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
442#else
443#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
444#endif
445
446#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
447#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
448
449#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
450 defined(CONFIG_KPROBES)
451/* We want the debuggers to be able to set breakpoints anywhere, so
452 * don't write protect the kernel text */
453#define _PAGE_RAM_TEXT _PAGE_RAM
454#else
455#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
456#endif
457
458#define PAGE_NONE __pgprot(_PAGE_BASE)
459#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
460#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
461#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
462#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
463#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
464#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
465
466#define PAGE_KERNEL __pgprot(_PAGE_RAM)
467#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO)
468
469/*
470 * The PowerPC can only do execute protection on a segment (256MB) basis,
471 * not on a page basis. So we consider execute permission the same as read.
472 * Also, write permissions imply read permissions.
473 * This is the closest we can get..
474 */
475#define __P000 PAGE_NONE
476#define __P001 PAGE_READONLY_X
477#define __P010 PAGE_COPY
478#define __P011 PAGE_COPY_X
479#define __P100 PAGE_READONLY
480#define __P101 PAGE_READONLY_X
481#define __P110 PAGE_COPY
482#define __P111 PAGE_COPY_X
483
484#define __S000 PAGE_NONE
485#define __S001 PAGE_READONLY_X
486#define __S010 PAGE_SHARED
487#define __S011 PAGE_SHARED_X
488#define __S100 PAGE_READONLY
489#define __S101 PAGE_READONLY_X
490#define __S110 PAGE_SHARED
491#define __S111 PAGE_SHARED_X
492
493#ifndef __ASSEMBLY__
494/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
495 * kernel without large page PMD support */
496extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
497
498/*
499 * Conversions between PTE values and page frame numbers.
500 */
501
502/* in some case we want to additionaly adjust where the pfn is in the pte to
503 * allow room for more flags */
504#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
505#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8)
506#else
507#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
508#endif
509
510#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
511#define pte_page(x) pfn_to_page(pte_pfn(x))
512
513#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
514 pgprot_val(prot))
515#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
516#endif /* __ASSEMBLY__ */
517
518#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
519#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
520#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
521
522#define pmd_none(pmd) (!pmd_val(pmd))
523#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD)
524#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
525#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
526
527#ifndef __ASSEMBLY__
528/*
529 * The following only work if pte_present() is true.
530 * Undefined behaviour if not..
531 */
532static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
533static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
534static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
535static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
536static inline int pte_special(pte_t pte) { return 0; }
537
538static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
539static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
540
541static inline pte_t pte_wrprotect(pte_t pte) {
542 pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
543static inline pte_t pte_mkclean(pte_t pte) {
544 pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
545static inline pte_t pte_mkold(pte_t pte) {
546 pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
547
548static inline pte_t pte_mkwrite(pte_t pte) {
549 pte_val(pte) |= _PAGE_RW; return pte; }
550static inline pte_t pte_mkdirty(pte_t pte) {
551 pte_val(pte) |= _PAGE_DIRTY; return pte; }
552static inline pte_t pte_mkyoung(pte_t pte) {
553 pte_val(pte) |= _PAGE_ACCESSED; return pte; }
554static inline pte_t pte_mkspecial(pte_t pte) {
555 return pte; }
556static inline unsigned long pte_pgprot(pte_t pte)
557{
558 return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
559}
560
561static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
562{
563 pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
564 return pte;
565}
566
567/*
568 * When flushing the tlb entry for a page, we also need to flush the hash
569 * table entry. flush_hash_pages is assembler (for speed) in hashtable.S.
570 */
571extern int flush_hash_pages(unsigned context, unsigned long va,
572 unsigned long pmdval, int count);
573
574/* Add an HPTE to the hash table */
575extern void add_hash_page(unsigned context, unsigned long va,
576 unsigned long pmdval);
577
578/*
579 * Atomic PTE updates.
580 *
581 * pte_update clears and sets bit atomically, and returns
582 * the old pte value. In the 64-bit PTE case we lock around the
583 * low PTE word since we expect ALL flag bits to be there
584 */
585#ifndef CONFIG_PTE_64BIT
586static inline unsigned long pte_update(pte_t *p,
587 unsigned long clr,
588 unsigned long set)
589{
590#ifdef PTE_ATOMIC_UPDATES
591 unsigned long old, tmp;
592
593 __asm__ __volatile__("\
5941: lwarx %0,0,%3\n\
595 andc %1,%0,%4\n\
596 or %1,%1,%5\n"
597 PPC405_ERR77(0,%3)
598" stwcx. %1,0,%3\n\
599 bne- 1b"
600 : "=&r" (old), "=&r" (tmp), "=m" (*p)
601 : "r" (p), "r" (clr), "r" (set), "m" (*p)
602 : "cc" );
603#else /* PTE_ATOMIC_UPDATES */
604 unsigned long old = pte_val(*p);
605 *p = __pte((old & ~clr) | set);
606#endif /* !PTE_ATOMIC_UPDATES */
607
608#ifdef CONFIG_44x
609 if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
610 icache_44x_need_flush = 1;
611#endif
612 return old;
613}
614#else /* CONFIG_PTE_64BIT */
615/* TODO: Change that to only modify the low word and move set_pte_at()
616 * out of line
617 */
618static inline unsigned long long pte_update(pte_t *p,
619 unsigned long clr,
620 unsigned long set)
621{
622#ifdef PTE_ATOMIC_UPDATES
623 unsigned long long old;
624 unsigned long tmp;
625
626 __asm__ __volatile__("\
6271: lwarx %L0,0,%4\n\
628 lwzx %0,0,%3\n\
629 andc %1,%L0,%5\n\
630 or %1,%1,%6\n"
631 PPC405_ERR77(0,%3)
632" stwcx. %1,0,%4\n\
633 bne- 1b"
634 : "=&r" (old), "=&r" (tmp), "=m" (*p)
635 : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
636 : "cc" );
637#else /* PTE_ATOMIC_UPDATES */
638 unsigned long long old = pte_val(*p);
639 *p = __pte((old & ~(unsigned long long)clr) | set);
640#endif /* !PTE_ATOMIC_UPDATES */
641
642#ifdef CONFIG_44x
643 if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
644 icache_44x_need_flush = 1;
645#endif
646 return old;
647}
648#endif /* CONFIG_PTE_64BIT */
649
650/*
651 * set_pte stores a linux PTE into the linux page table.
652 * On machines which use an MMU hash table we avoid changing the
653 * _PAGE_HASHPTE bit.
654 */
655static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
656 pte_t *ptep, pte_t pte)
657{
658#if _PAGE_HASHPTE != 0
659 pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
660#else
661 *ptep = pte;
662#endif
663}
664
665/*
666 * 2.6 calls this without flushing the TLB entry; this is wrong
667 * for our hash-based implementation, we fix that up here.
668 */
669#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
670static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
671{
672 unsigned long old;
673 old = pte_update(ptep, _PAGE_ACCESSED, 0);
674#if _PAGE_HASHPTE != 0
675 if (old & _PAGE_HASHPTE) {
676 unsigned long ptephys = __pa(ptep) & PAGE_MASK;
677 flush_hash_pages(context, addr, ptephys, 1);
678 }
679#endif
680 return (old & _PAGE_ACCESSED) != 0;
681}
682#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
683 __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
684
685#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
686static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
687 pte_t *ptep)
688{
689 return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
690}
691
692#define __HAVE_ARCH_PTEP_SET_WRPROTECT
693static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
694 pte_t *ptep)
695{
696 pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
697}
698static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
699 unsigned long addr, pte_t *ptep)
700{
701 ptep_set_wrprotect(mm, addr, ptep);
702}
703
704
705#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
706static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
707{
708 unsigned long bits = pte_val(entry) &
709 (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
710 pte_update(ptep, 0, bits);
711}
712
713#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
714({ \
715 int __changed = !pte_same(*(__ptep), __entry); \
716 if (__changed) { \
717 __ptep_set_access_flags(__ptep, __entry, __dirty); \
718 flush_tlb_page_nohash(__vma, __address); \
719 } \
720 __changed; \
721})
722
723/*
724 * Macro to mark a page protection value as "uncacheable".
725 */
726#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
727
728struct file;
729extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
730 unsigned long size, pgprot_t vma_prot);
731#define __HAVE_PHYS_MEM_ACCESS_PROT
732
733#define __HAVE_ARCH_PTE_SAME
734#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
735
736/*
737 * Note that on Book E processors, the pmd contains the kernel virtual
738 * (lowmem) address of the pte page. The physical address is less useful
739 * because everything runs with translation enabled (even the TLB miss
740 * handler). On everything else the pmd contains the physical address
741 * of the pte page. -- paulus
742 */
743#ifndef CONFIG_BOOKE
744#define pmd_page_vaddr(pmd) \
745 ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
746#define pmd_page(pmd) \
747 (mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
748#else
749#define pmd_page_vaddr(pmd) \
750 ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
751#define pmd_page(pmd) \
752 pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
753#endif
754
755/* to find an entry in a kernel page-table-directory */
756#define pgd_offset_k(address) pgd_offset(&init_mm, address)
757
758/* to find an entry in a page-table-directory */
759#define pgd_index(address) ((address) >> PGDIR_SHIFT)
760#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
761
762/* Find an entry in the third-level page table.. */
763#define pte_index(address) \
764 (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
765#define pte_offset_kernel(dir, addr) \
766 ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
767#define pte_offset_map(dir, addr) \
768 ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
769#define pte_offset_map_nested(dir, addr) \
770 ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
771
772#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
773#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
774
775/*
776 * Encode and decode a swap entry.
777 * Note that the bits we use in a PTE for representing a swap entry
778 * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
779 *_PAGE_HASHPTE bit (if used). -- paulus
780 */
781#define __swp_type(entry) ((entry).val & 0x1f)
782#define __swp_offset(entry) ((entry).val >> 5)
783#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) })
784#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
785#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
786
787/* Encode and decode a nonlinear file mapping entry */
788#define PTE_FILE_MAX_BITS 29
789#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
790#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
791
792/*
793 * No page table caches to initialise
794 */
795#define pgtable_cache_init() do { } while (0)
796
797extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
798 pmd_t **pmdp);
799
800#endif /* !__ASSEMBLY__ */
801
802#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */