diff options
Diffstat (limited to 'include/asm-mips/sgi/mc.h')
-rw-r--r-- | include/asm-mips/sgi/mc.h | 231 |
1 files changed, 0 insertions, 231 deletions
diff --git a/include/asm-mips/sgi/mc.h b/include/asm-mips/sgi/mc.h deleted file mode 100644 index 1576c2394de8..000000000000 --- a/include/asm-mips/sgi/mc.h +++ /dev/null | |||
@@ -1,231 +0,0 @@ | |||
1 | /* | ||
2 | * This file is subject to the terms and conditions of the GNU General Public | ||
3 | * License. See the file "COPYING" in the main directory of this archive | ||
4 | * for more details. | ||
5 | * | ||
6 | * mc.h: Definitions for SGI Memory Controller | ||
7 | * | ||
8 | * Copyright (C) 1996 David S. Miller | ||
9 | * Copyright (C) 1999 Ralf Baechle | ||
10 | * Copyright (C) 1999 Silicon Graphics, Inc. | ||
11 | */ | ||
12 | |||
13 | #ifndef _SGI_MC_H | ||
14 | #define _SGI_MC_H | ||
15 | |||
16 | struct sgimc_regs { | ||
17 | u32 _unused0; | ||
18 | volatile u32 cpuctrl0; /* CPU control register 0, readwrite */ | ||
19 | #define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */ | ||
20 | #define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */ | ||
21 | #define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */ | ||
22 | #define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */ | ||
23 | #define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */ | ||
24 | #define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */ | ||
25 | #define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */ | ||
26 | #define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */ | ||
27 | #define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */ | ||
28 | #define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */ | ||
29 | #define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */ | ||
30 | #define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */ | ||
31 | #define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */ | ||
32 | #define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */ | ||
33 | #define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */ | ||
34 | #define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */ | ||
35 | #define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */ | ||
36 | #define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */ | ||
37 | #define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */ | ||
38 | u32 _unused1; | ||
39 | volatile u32 cpuctrl1; /* CPU control register 1, readwrite */ | ||
40 | #define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */ | ||
41 | #define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */ | ||
42 | #define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */ | ||
43 | #define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */ | ||
44 | #define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */ | ||
45 | #define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */ | ||
46 | #define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */ | ||
47 | |||
48 | u32 _unused2; | ||
49 | volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */ | ||
50 | |||
51 | u32 _unused3; | ||
52 | volatile u32 systemid; /* MC system ID register, readonly */ | ||
53 | #define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */ | ||
54 | #define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */ | ||
55 | |||
56 | u32 _unused4[3]; | ||
57 | volatile u32 divider; /* Divider reg for RPSS */ | ||
58 | |||
59 | u32 _unused5; | ||
60 | u32 eeprom; /* EEPROM byte reg for r4k */ | ||
61 | #define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */ | ||
62 | #define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */ | ||
63 | #define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */ | ||
64 | #define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */ | ||
65 | #define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */ | ||
66 | |||
67 | u32 _unused6[3]; | ||
68 | volatile u32 rcntpre; /* Preload refresh counter */ | ||
69 | |||
70 | u32 _unused7; | ||
71 | volatile u32 rcounter; /* Readonly refresh counter */ | ||
72 | |||
73 | u32 _unused8[13]; | ||
74 | volatile u32 giopar; /* Parameter word for GIO64 */ | ||
75 | #define SGIMC_GIOPAR_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */ | ||
76 | #define SGIMC_GIOPAR_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */ | ||
77 | #define SGIMC_GIOPAR_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */ | ||
78 | #define SGIMC_GIOPAR_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */ | ||
79 | #define SGIMC_GIOPAR_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */ | ||
80 | #define SGIMC_GIOPAR_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */ | ||
81 | #define SGIMC_GIOPAR_RTIMEGFX 0x00000040 /* GFX device has realtime attr */ | ||
82 | #define SGIMC_GIOPAR_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */ | ||
83 | #define SGIMC_GIOPAR_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */ | ||
84 | #define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */ | ||
85 | #define SGIMC_GIOPAR_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */ | ||
86 | #define SGIMC_GIOPAR_MASTERGFX 0x00000800 /* GFX can act as a bus master */ | ||
87 | #define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */ | ||
88 | #define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */ | ||
89 | #define SGIMC_GIOPAR_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */ | ||
90 | #define SGIMC_GIOPAR_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */ | ||
91 | |||
92 | u32 _unused9; | ||
93 | volatile u32 cputp; /* CPU bus arb time period */ | ||
94 | |||
95 | u32 _unused10[3]; | ||
96 | volatile u32 lbursttp; /* Time period for long bursts */ | ||
97 | |||
98 | /* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must | ||
99 | * be the same size. The size encoding for supported SIMMs is bellow */ | ||
100 | u32 _unused11[9]; | ||
101 | volatile u32 mconfig0; /* Memory config register zero */ | ||
102 | u32 _unused12; | ||
103 | volatile u32 mconfig1; /* Memory config register one */ | ||
104 | #define SGIMC_MCONFIG_BASEADDR 0x000000ff /* Base address of bank*/ | ||
105 | #define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */ | ||
106 | #define SGIMC_MCONFIG_BVALID 0x00002000 /* Bank is valid */ | ||
107 | #define SGIMC_MCONFIG_SBANKS 0x00004000 /* Number of subbanks */ | ||
108 | |||
109 | u32 _unused13; | ||
110 | volatile u32 cmacc; /* Mem access config for CPU */ | ||
111 | u32 _unused14; | ||
112 | volatile u32 gmacc; /* Mem access config for GIO */ | ||
113 | |||
114 | /* This define applies to both cmacc and gmacc registers above. */ | ||
115 | #define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */ | ||
116 | |||
117 | /* Error address/status regs from GIO and CPU perspectives. */ | ||
118 | u32 _unused15; | ||
119 | volatile u32 cerr; /* Error address reg for CPU */ | ||
120 | u32 _unused16; | ||
121 | volatile u32 cstat; /* Status reg for CPU */ | ||
122 | #define SGIMC_CSTAT_RD 0x00000100 /* read parity error */ | ||
123 | #define SGIMC_CSTAT_PAR 0x00000200 /* CPU parity error */ | ||
124 | #define SGIMC_CSTAT_ADDR 0x00000400 /* memory bus error bad addr */ | ||
125 | #define SGIMC_CSTAT_SYSAD_PAR 0x00000800 /* sysad parity error */ | ||
126 | #define SGIMC_CSTAT_SYSCMD_PAR 0x00001000 /* syscmd parity error */ | ||
127 | #define SGIMC_CSTAT_BAD_DATA 0x00002000 /* bad data identifier */ | ||
128 | #define SGIMC_CSTAT_PAR_MASK 0x00001f00 /* parity error mask */ | ||
129 | #define SGIMC_CSTAT_RD_PAR (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR) | ||
130 | |||
131 | u32 _unused17; | ||
132 | volatile u32 gerr; /* Error address reg for GIO */ | ||
133 | u32 _unused18; | ||
134 | volatile u32 gstat; /* Status reg for GIO */ | ||
135 | #define SGIMC_GSTAT_RD 0x00000100 /* read parity error */ | ||
136 | #define SGIMC_GSTAT_WR 0x00000200 /* write parity error */ | ||
137 | #define SGIMC_GSTAT_TIME 0x00000400 /* GIO bus timed out */ | ||
138 | #define SGIMC_GSTAT_PROM 0x00000800 /* write to PROM when PROM_EN not set */ | ||
139 | #define SGIMC_GSTAT_ADDR 0x00001000 /* parity error on addr cycle */ | ||
140 | #define SGIMC_GSTAT_BC 0x00002000 /* parity error on byte count cycle */ | ||
141 | #define SGIMC_GSTAT_PIO_RD 0x00004000 /* read data parity on pio */ | ||
142 | #define SGIMC_GSTAT_PIO_WR 0x00008000 /* write data parity on pio */ | ||
143 | |||
144 | /* Special hard bus locking registers. */ | ||
145 | u32 _unused19; | ||
146 | volatile u32 syssembit; /* Uni-bit system semaphore */ | ||
147 | u32 _unused20; | ||
148 | volatile u32 mlock; /* Global GIO memory access lock */ | ||
149 | u32 _unused21; | ||
150 | volatile u32 elock; /* Locks EISA from GIO accesses */ | ||
151 | |||
152 | /* GIO dma control registers. */ | ||
153 | u32 _unused22[15]; | ||
154 | volatile u32 gio_dma_trans; /* DMA mask to translation GIO addrs */ | ||
155 | u32 _unused23; | ||
156 | volatile u32 gio_dma_sbits; /* DMA GIO addr substitution bits */ | ||
157 | u32 _unused24; | ||
158 | volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */ | ||
159 | u32 _unused25; | ||
160 | volatile u32 dma_ctrl; /* Main DMA control reg */ | ||
161 | |||
162 | /* DMA TLB entry 0 */ | ||
163 | u32 _unused26[5]; | ||
164 | volatile u32 dtlb_hi0; | ||
165 | u32 _unused27; | ||
166 | volatile u32 dtlb_lo0; | ||
167 | |||
168 | /* DMA TLB entry 1 */ | ||
169 | u32 _unused28; | ||
170 | volatile u32 dtlb_hi1; | ||
171 | u32 _unused29; | ||
172 | volatile u32 dtlb_lo1; | ||
173 | |||
174 | /* DMA TLB entry 2 */ | ||
175 | u32 _unused30; | ||
176 | volatile u32 dtlb_hi2; | ||
177 | u32 _unused31; | ||
178 | volatile u32 dtlb_lo2; | ||
179 | |||
180 | /* DMA TLB entry 3 */ | ||
181 | u32 _unused32; | ||
182 | volatile u32 dtlb_hi3; | ||
183 | u32 _unused33; | ||
184 | volatile u32 dtlb_lo3; | ||
185 | |||
186 | u32 _unused34[0x0392]; | ||
187 | |||
188 | u32 _unused35; | ||
189 | volatile u32 rpsscounter; /* Chirps at 100ns */ | ||
190 | |||
191 | u32 _unused36[0x1000/4-2*4]; | ||
192 | |||
193 | u32 _unused37; | ||
194 | volatile u32 maddronly; /* Address DMA goes at */ | ||
195 | u32 _unused38; | ||
196 | volatile u32 maddrpdeflts; /* Same as above, plus set defaults */ | ||
197 | u32 _unused39; | ||
198 | volatile u32 dmasz; /* DMA count */ | ||
199 | u32 _unused40; | ||
200 | volatile u32 ssize; /* DMA stride size */ | ||
201 | u32 _unused41; | ||
202 | volatile u32 gmaddronly; /* Set GIO DMA but don't start trans */ | ||
203 | u32 _unused42; | ||
204 | volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */ | ||
205 | u32 _unused43; | ||
206 | volatile u32 dmamode; /* DMA mode config bit settings */ | ||
207 | u32 _unused44; | ||
208 | volatile u32 dmaccount; /* Zoom and byte count for DMA */ | ||
209 | u32 _unused45; | ||
210 | volatile u32 dmastart; /* Pedal to the metal. */ | ||
211 | u32 _unused46; | ||
212 | volatile u32 dmarunning; /* DMA op is in progress */ | ||
213 | u32 _unused47; | ||
214 | volatile u32 maddrdefstart; /* Set dma addr, defaults, and kick it */ | ||
215 | }; | ||
216 | |||
217 | extern struct sgimc_regs *sgimc; | ||
218 | #define SGIMC_BASE 0x1fa00000 /* physical */ | ||
219 | |||
220 | /* Base location of the two ram banks found in IP2[0268] machines. */ | ||
221 | #define SGIMC_SEG0_BADDR 0x08000000 | ||
222 | #define SGIMC_SEG1_BADDR 0x20000000 | ||
223 | |||
224 | /* Maximum size of the above banks are per machine. */ | ||
225 | #define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */ | ||
226 | #define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */ | ||
227 | #define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */ | ||
228 | |||
229 | extern void sgimc_init(void); | ||
230 | |||
231 | #endif /* _SGI_MC_H */ | ||