aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-mips/sgi/hpc3.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-mips/sgi/hpc3.h')
-rw-r--r--include/asm-mips/sgi/hpc3.h317
1 files changed, 317 insertions, 0 deletions
diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h
new file mode 100644
index 000000000000..a5b988d7327a
--- /dev/null
+++ b/include/asm-mips/sgi/hpc3.h
@@ -0,0 +1,317 @@
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * hpc3.h: Definitions for SGI HPC3 controller
7 *
8 * Copyright (C) 1996 David S. Miller
9 * Copyright (C) 1998 Ralf Baechle
10 */
11
12#ifndef _SGI_HPC3_H
13#define _SGI_HPC3_H
14
15#include <linux/types.h>
16#include <asm/page.h>
17
18/* An HPC DMA descriptor. */
19struct hpc_dma_desc {
20 u32 pbuf; /* physical address of data buffer */
21 u32 cntinfo; /* counter and info bits */
22#define HPCDMA_EOX 0x80000000 /* last desc in chain for tx */
23#define HPCDMA_EOR 0x80000000 /* last desc in chain for rx */
24#define HPCDMA_EOXP 0x40000000 /* end of packet for tx */
25#define HPCDMA_EORP 0x40000000 /* end of packet for rx */
26#define HPCDMA_XIE 0x20000000 /* irq generated when at end of this desc */
27#define HPCDMA_XIU 0x01000000 /* Tx buffer in use by CPU. */
28#define HPCDMA_EIPC 0x00ff0000 /* SEEQ ethernet special xternal bytecount */
29#define HPCDMA_ETXD 0x00008000 /* set to one by HPC when packet tx'd */
30#define HPCDMA_OWN 0x00004000 /* Denotes ring buffer ownership on rx */
31#define HPCDMA_BCNT 0x00003fff /* size in bytes of this dma buffer */
32
33 u32 pnext; /* paddr of next hpc_dma_desc if any */
34};
35
36/* The set of regs for each HPC3 PBUS DMA channel. */
37struct hpc3_pbus_dmacregs {
38 volatile u32 pbdma_bptr; /* pbus dma channel buffer ptr */
39 volatile u32 pbdma_dptr; /* pbus dma channel desc ptr */
40 u32 _unused0[0x1000/4 - 2]; /* padding */
41 volatile u32 pbdma_ctrl; /* pbus dma channel control register has
42 * copletely different meaning for read
43 * compared with write */
44 /* read */
45#define HPC3_PDMACTRL_INT 0x00000001 /* interrupt (cleared after read) */
46#define HPC3_PDMACTRL_ISACT 0x00000002 /* channel active */
47 /* write */
48#define HPC3_PDMACTRL_SEL 0x00000002 /* little endian transfer */
49#define HPC3_PDMACTRL_RCV 0x00000004 /* direction is receive */
50#define HPC3_PDMACTRL_FLSH 0x00000008 /* enable flush for receive DMA */
51#define HPC3_PDMACTRL_ACT 0x00000010 /* start dma transfer */
52#define HPC3_PDMACTRL_LD 0x00000020 /* load enable for ACT */
53#define HPC3_PDMACTRL_RT 0x00000040 /* Use realtime GIO bus servicing */
54#define HPC3_PDMACTRL_HW 0x0000ff00 /* DMA High-water mark */
55#define HPC3_PDMACTRL_FB 0x003f0000 /* Ptr to beginning of fifo */
56#define HPC3_PDMACTRL_FE 0x3f000000 /* Ptr to end of fifo */
57
58 u32 _unused1[0x1000/4 - 1]; /* padding */
59};
60
61/* The HPC3 SCSI registers, this does not include external ones. */
62struct hpc3_scsiregs {
63 volatile u32 cbptr; /* current dma buffer ptr, diagnostic use only */
64 volatile u32 ndptr; /* next dma descriptor ptr */
65 u32 _unused0[0x1000/4 - 2]; /* padding */
66 volatile u32 bcd; /* byte count info */
67#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */
68#define HPC3_SBCD_XIE 0x00004000 /* Send IRQ when done with cur buf */
69#define HPC3_SBCD_EOX 0x00008000 /* Indicates this is last buf in chain */
70
71 volatile u32 ctrl; /* control register */
72#define HPC3_SCTRL_IRQ 0x01 /* IRQ asserted, either dma done or parity */
73#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */
74#define HPC3_SCTRL_DIR 0x04 /* DMA direction, 1=dev2mem 0=mem2dev */
75#define HPC3_SCTRL_FLUSH 0x08 /* Tells HPC3 to flush scsi fifos */
76#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */
77#define HPC3_SCTRL_AMASK 0x20 /* DMA active inhibits PIO */
78#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */
79#define HPC3_SCTRL_PERR 0x80 /* Bad parity on HPC3 iface to scsi controller */
80
81 volatile u32 gfptr; /* current GIO fifo ptr */
82 volatile u32 dfptr; /* current device fifo ptr */
83 volatile u32 dconfig; /* DMA configuration register */
84#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */
85#define HPC3_SDCFG_D1 0x00006 /* Cycles to spend in D1 state */
86#define HPC3_SDCFG_D2 0x00038 /* Cycles to spend in D2 state */
87#define HPC3_SDCFG_D3 0x001c0 /* Cycles to spend in D3 state */
88#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */
89#define HPC3_SDCFG_HW 0x01000 /* Enable 16-bit halfword DMA accesses to scsi */
90#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */
91#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */
92#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */
93#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */
94
95 volatile u32 pconfig; /* PIO configuration register */
96#define HPC3_SPCFG_P3 0x0003 /* Cycles to spend in P3 state */
97#define HPC3_SPCFG_P2W 0x001c /* Cycles to spend in P2 state for writes */
98#define HPC3_SPCFG_P2R 0x01e0 /* Cycles to spend in P2 state for reads */
99#define HPC3_SPCFG_P1 0x0e00 /* Cycles to spend in P1 state */
100#define HPC3_SPCFG_HW 0x1000 /* Enable 16-bit halfword PIO accesses to scsi */
101#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */
102#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */
103#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */
104
105 u32 _unused1[0x1000/4 - 6]; /* padding */
106};
107
108/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */
109struct hpc3_ethregs {
110 /* Receiver registers. */
111 volatile u32 rx_cbptr; /* current dma buffer ptr, diagnostic use only */
112 volatile u32 rx_ndptr; /* next dma descriptor ptr */
113 u32 _unused0[0x1000/4 - 2]; /* padding */
114 volatile u32 rx_bcd; /* byte count info */
115#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */
116#define HPC3_ERXBCD_XIE 0x20000000 /* HPC3 interrupts cpu at end of this buf */
117#define HPC3_ERXBCD_EOX 0x80000000 /* flags this as end of descriptor chain */
118
119 volatile u32 rx_ctrl; /* control register */
120#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */
121#define HPC3_ERXCTRL_STAT6 0x00000040 /* Rdonly irq status */
122#define HPC3_ERXCTRL_STAT7 0x00000080 /* Rdonlt old/new status bit from Seeq */
123#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */
124#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */
125#define HPC3_ERXCTRL_AMASK 0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */
126#define HPC3_ERXCTRL_RBO 0x00000800 /* Receive buffer overflow if set to 1 */
127
128 volatile u32 rx_gfptr; /* current GIO fifo ptr */
129 volatile u32 rx_dfptr; /* current device fifo ptr */
130 u32 _unused1; /* padding */
131 volatile u32 rx_reset; /* reset register */
132#define HPC3_ERXRST_CRESET 0x1 /* Reset dma channel and external controller */
133#define HPC3_ERXRST_CLRIRQ 0x2 /* Clear channel interrupt */
134#define HPC3_ERXRST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
135
136 volatile u32 rx_dconfig; /* DMA configuration register */
137#define HPC3_ERXDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
138#define HPC3_ERXDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
139#define HPC3_ERXDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
140#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
141#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
142#define HPC3_ERXDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
143#define HPC3_ERXDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
144#define HPC3_ERXDCFG_PTO 0x30000 /* Programmed timeout value for above two */
145
146 volatile u32 rx_pconfig; /* PIO configuration register */
147#define HPC3_ERXPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
148#define HPC3_ERXPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
149#define HPC3_ERXPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
150#define HPC3_ERXPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
151
152 u32 _unused2[0x1000/4 - 8]; /* padding */
153
154 /* Transmitter registers. */
155 volatile u32 tx_cbptr; /* current dma buffer ptr, diagnostic use only */
156 volatile u32 tx_ndptr; /* next dma descriptor ptr */
157 u32 _unused3[0x1000/4 - 2]; /* padding */
158 volatile u32 tx_bcd; /* byte count info */
159#define HPC3_ETXBCD_BCNTMSK 0x00003fff /* bytes to be read from memory */
160#define HPC3_ETXBCD_ESAMP 0x10000000 /* if set, too late to add descriptor */
161#define HPC3_ETXBCD_XIE 0x20000000 /* Interrupt cpu at end of cur desc */
162#define HPC3_ETXBCD_EOP 0x40000000 /* Last byte of cur buf is end of packet */
163#define HPC3_ETXBCD_EOX 0x80000000 /* This buf is the end of desc chain */
164
165 volatile u32 tx_ctrl; /* control register */
166#define HPC3_ETXCTRL_STAT30 0x0000000f /* Rdonly copy of seeq tx stat reg */
167#define HPC3_ETXCTRL_STAT4 0x00000010 /* Indicate late collision occurred */
168#define HPC3_ETXCTRL_STAT75 0x000000e0 /* Rdonly irq status from seeq */
169#define HPC3_ETXCTRL_ENDIAN 0x00000100 /* DMA channel endian mode, 1=little 0=big */
170#define HPC3_ETXCTRL_ACTIVE 0x00000200 /* DMA tx channel is active */
171#define HPC3_ETXCTRL_AMASK 0x00000400 /* Indicates ACTIVE inhibits PIO's */
172
173 volatile u32 tx_gfptr; /* current GIO fifo ptr */
174 volatile u32 tx_dfptr; /* current device fifo ptr */
175 u32 _unused4[0x1000/4 - 4]; /* padding */
176};
177
178struct hpc3_regs {
179 /* First regs for the PBUS 8 dma channels. */
180 struct hpc3_pbus_dmacregs pbdma[8];
181
182 /* Now the HPC scsi registers, we get two scsi reg sets. */
183 struct hpc3_scsiregs scsi_chan0, scsi_chan1;
184
185 /* The SEEQ hpc3 ethernet dma/control registers. */
186 struct hpc3_ethregs ethregs;
187
188 /* Here are where the hpc3 fifo's can be directly accessed
189 * via PIO accesses. Under normal operation we never stick
190 * our grubby paws in here so it's just padding. */
191 u32 _unused0[0x18000/4];
192
193 /* HPC3 irq status regs. Due to a peculiar bug you need to
194 * look at two different register addresses to get at all of
195 * the status bits. The first reg can only reliably report
196 * bits 4:0 of the status, and the second reg can only
197 * reliably report bits 9:5 of the hpc3 irq status. I told
198 * you it was a peculiar bug. ;-)
199 */
200 volatile u32 istat0; /* Irq status, only bits <4:0> reliable. */
201#define HPC3_ISTAT_PBIMASK 0x0ff /* irq bits for pbus devs 0 --> 7 */
202#define HPC3_ISTAT_SC0MASK 0x100 /* irq bit for scsi channel 0 */
203#define HPC3_ISTAT_SC1MASK 0x200 /* irq bit for scsi channel 1 */
204
205 volatile u32 gio_misc; /* GIO misc control bits. */
206#define HPC3_GIOMISC_ERTIME 0x1 /* Enable external timer real time. */
207#define HPC3_GIOMISC_DENDIAN 0x2 /* dma descriptor endian, 1=lit 0=big */
208
209 volatile u32 eeprom; /* EEPROM data reg. */
210#define HPC3_EEPROM_EPROT 0x01 /* Protect register enable */
211#define HPC3_EEPROM_CSEL 0x02 /* Chip select */
212#define HPC3_EEPROM_ECLK 0x04 /* EEPROM clock */
213#define HPC3_EEPROM_DATO 0x08 /* Data out */
214#define HPC3_EEPROM_DATI 0x10 /* Data in */
215
216 volatile u32 istat1; /* Irq status, only bits <9:5> reliable. */
217 volatile u32 bestat; /* Bus error interrupt status reg. */
218#define HPC3_BESTAT_BLMASK 0x000ff /* Bus lane where bad parity occurred */
219#define HPC3_BESTAT_CTYPE 0x00100 /* Bus cycle type, 0=PIO 1=DMA */
220#define HPC3_BESTAT_PIDSHIFT 9
221#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */
222
223 u32 _unused1[0x14000/4 - 5]; /* padding */
224
225 /* Now direct PIO per-HPC3 peripheral access to external regs. */
226 volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */
227 u32 _unused2[0x7c00/4];
228 volatile u32 scsi1_ext[256]; /* SCSI channel 1 external regs */
229 u32 _unused3[0x7c00/4];
230 volatile u32 eth_ext[320]; /* Ethernet external registers */
231 u32 _unused4[0x3b00/4];
232
233 /* Per-peripheral device external registers and DMA/PIO control. */
234 volatile u32 pbus_extregs[16][256];
235 volatile u32 pbus_dmacfg[8][128];
236 /* Cycles to spend in D3 for reads */
237#define HPC3_DMACFG_D3R_MASK 0x00000001
238#define HPC3_DMACFG_D3R_SHIFT 0
239 /* Cycles to spend in D4 for reads */
240#define HPC3_DMACFG_D4R_MASK 0x0000001e
241#define HPC3_DMACFG_D4R_SHIFT 1
242 /* Cycles to spend in D5 for reads */
243#define HPC3_DMACFG_D5R_MASK 0x000001e0
244#define HPC3_DMACFG_D5R_SHIFT 5
245 /* Cycles to spend in D3 for writes */
246#define HPC3_DMACFG_D3W_MASK 0x00000200
247#define HPC3_DMACFG_D3W_SHIFT 9
248 /* Cycles to spend in D4 for writes */
249#define HPC3_DMACFG_D4W_MASK 0x00003c00
250#define HPC3_DMACFG_D4W_SHIFT 10
251 /* Cycles to spend in D5 for writes */
252#define HPC3_DMACFG_D5W_MASK 0x0003c000
253#define HPC3_DMACFG_D5W_SHIFT 14
254 /* Enable 16-bit DMA access mode */
255#define HPC3_DMACFG_DS16 0x00040000
256 /* Places halfwords on high 16 bits of bus */
257#define HPC3_DMACFG_EVENHI 0x00080000
258 /* Make this device real time */
259#define HPC3_DMACFG_RTIME 0x00200000
260 /* 5 bit burst count for DMA device */
261#define HPC3_DMACFG_BURST_MASK 0x07c00000
262#define HPC3_DMACFG_BURST_SHIFT 22
263 /* Use live pbus_dreq unsynchronized signal */
264#define HPC3_DMACFG_DRQLIVE 0x08000000
265 volatile u32 pbus_piocfg[16][64];
266 /* Cycles to spend in P2 state for reads */
267#define HPC3_PIOCFG_P2R_MASK 0x00001
268#define HPC3_PIOCFG_P2R_SHIFT 0
269 /* Cycles to spend in P3 state for reads */
270#define HPC3_PIOCFG_P3R_MASK 0x0001e
271#define HPC3_PIOCFG_P3R_SHIFT 1
272 /* Cycles to spend in P4 state for reads */
273#define HPC3_PIOCFG_P4R_MASK 0x001e0
274#define HPC3_PIOCFG_P4R_SHIFT 5
275 /* Cycles to spend in P2 state for writes */
276#define HPC3_PIOCFG_P2W_MASK 0x00200
277#define HPC3_PIOCFG_P2W_SHIFT 9
278 /* Cycles to spend in P3 state for writes */
279#define HPC3_PIOCFG_P3W_MASK 0x03c00
280#define HPC3_PIOCFG_P3W_SHIFT 10
281 /* Cycles to spend in P4 state for writes */
282#define HPC3_PIOCFG_P4W_MASK 0x3c000
283#define HPC3_PIOCFG_P4W_SHIFT 14
284 /* Enable 16-bit PIO accesses */
285#define HPC3_PIOCFG_DS16 0x40000
286 /* Place even address bits in bits <15:8> */
287#define HPC3_PIOCFG_EVENHI 0x80000
288
289 /* PBUS PROM control regs. */
290 volatile u32 pbus_promwe; /* PROM write enable register */
291#define HPC3_PROM_WENAB 0x1 /* Enable writes to the PROM */
292
293 u32 _unused5[0x0800/4 - 1];
294 volatile u32 pbus_promswap; /* Chip select swap reg */
295#define HPC3_PROM_SWAP 0x1 /* invert GIO addr bit to select prom0 or prom1 */
296
297 u32 _unused6[0x0800/4 - 1];
298 volatile u32 pbus_gout; /* PROM general purpose output reg */
299#define HPC3_PROM_STAT 0x1 /* General purpose status bit in gout */
300
301 u32 _unused7[0x1000/4 - 1];
302 volatile u32 rtcregs[14]; /* Dallas clock registers */
303 u32 _unused8[50];
304 volatile u32 bbram[8192-50-14]; /* Battery backed ram */
305};
306
307/*
308 * It is possible to have two HPC3's within the address space on
309 * one machine, though only having one is more likely on an Indy.
310 */
311extern struct hpc3_regs *hpc3c0, *hpc3c1;
312#define HPC3_CHIP0_BASE 0x1fb80000 /* physical */
313#define HPC3_CHIP1_BASE 0x1fb00000 /* physical */
314
315extern void sgihpc_init(void);
316
317#endif /* _SGI_HPC3_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-23 00:12:45 -0500