aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-mips/serial.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-mips/serial.h')
-rw-r--r--include/asm-mips/serial.h84
1 files changed, 0 insertions, 84 deletions
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 8a70ff58f760..4eed8e2acdc3 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -29,32 +29,6 @@
29#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF 29#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
30#endif 30#endif
31 31
32#ifdef CONFIG_SERIAL_MANY_PORTS
33#define FOURPORT_FLAGS ASYNC_FOURPORT
34#define ACCENT_FLAGS 0
35#define BOCA_FLAGS 0
36#define HUB6_FLAGS 0
37#define RS_TABLE_SIZE 64
38#else
39#define RS_TABLE_SIZE
40#endif
41
42/*
43 * The following define the access methods for the HUB6 card. All
44 * access is through two ports for all 24 possible chips. The card is
45 * selected through the high 2 bits, the port on that card with the
46 * "middle" 3 bits, and the register on that port with the bottom
47 * 3 bits.
48 *
49 * While the access port and interrupt is configurable, the default
50 * port locations are 0x302 for the port control register, and 0x303
51 * for the data read/write register. Normally, the interrupt is at irq3
52 * but can be anything from 3 to 7 inclusive. Note that using 3 will
53 * require disabling com2.
54 */
55
56#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
57
58#ifdef CONFIG_MACH_JAZZ 32#ifdef CONFIG_MACH_JAZZ
59#include <asm/jazz.h> 33#include <asm/jazz.h>
60 34
@@ -240,66 +214,10 @@
240 { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ 214 { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
241 { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ 215 { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
242 216
243#ifdef CONFIG_SERIAL_MANY_PORTS
244#define EXTRA_SERIAL_PORT_DEFNS \
245 { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \
246 { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \
247 { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \
248 { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \
249 { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \
250 { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \
251 { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \
252 { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \
253 { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \
254 { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \
255 { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \
256 { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \
257 { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \
258 { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \
259 { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \
260 { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \
261 { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \
262 { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \
263 { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \
264 { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \
265 { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \
266 { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \
267 { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \
268 { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \
269 { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \
270 { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \
271 { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \
272 { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */
273#else /* CONFIG_SERIAL_MANY_PORTS */
274#define EXTRA_SERIAL_PORT_DEFNS
275#endif /* CONFIG_SERIAL_MANY_PORTS */
276
277#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ 217#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
278#define STD_SERIAL_PORT_DEFNS 218#define STD_SERIAL_PORT_DEFNS
279#define EXTRA_SERIAL_PORT_DEFNS
280#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ 219#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
281 220
282/* You can have up to four HUB6's in the system, but I've only
283 * included two cards here for a total of twelve ports.
284 */
285#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
286#define HUB6_SERIAL_PORT_DFNS \
287 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \
288 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \
289 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \
290 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \
291 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \
292 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \
293 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \
294 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \
295 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \
296 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \
297 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \
298 { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */
299#else
300#define HUB6_SERIAL_PORT_DFNS
301#endif
302
303#ifdef CONFIG_MOMENCO_JAGUAR_ATX 221#ifdef CONFIG_MOMENCO_JAGUAR_ATX
304/* Ordinary NS16552 duart with a 20MHz crystal. */ 222/* Ordinary NS16552 duart with a 20MHz crystal. */
305#define JAGUAR_ATX_UART_CLK 20000000 223#define JAGUAR_ATX_UART_CLK 20000000
@@ -427,8 +345,6 @@
427 COBALT_SERIAL_PORT_DEFNS \ 345 COBALT_SERIAL_PORT_DEFNS \
428 DDB5477_SERIAL_PORT_DEFNS \ 346 DDB5477_SERIAL_PORT_DEFNS \
429 EV96100_SERIAL_PORT_DEFNS \ 347 EV96100_SERIAL_PORT_DEFNS \
430 EXTRA_SERIAL_PORT_DEFNS \
431 HUB6_SERIAL_PORT_DFNS \
432 IP32_SERIAL_PORT_DEFNS \ 348 IP32_SERIAL_PORT_DEFNS \
433 ITE_SERIAL_PORT_DEFNS \ 349 ITE_SERIAL_PORT_DEFNS \
434 IVR_SERIAL_PORT_DEFNS \ 350 IVR_SERIAL_PORT_DEFNS \
generated by cgit v1.2.2 (git 2.25.0) at 2025-10-28 05:47:15 -0400