1 files changed, 166 insertions, 0 deletions
diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
new file mode 100644
index 000000000000..b8346cd3a6f6
--- /dev/null
+++ b/include/asm-blackfin/ptrace.h
@@ -0,0 +1,166 @@
+#ifndef _BFIN_PTRACE_H
+#define _BFIN_PTRACE_H
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *       0 - 7 are data registers R0-R7
+ *       8 - 15 are address registers P0-P7
+ *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
+ *      32 - 33 A registers A0 & A1
+ *      34 -    status register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *      32-33 --- Low 32-bit of A0&1
+ *      34-35 --- High 8-bit of A0&1
+ */
+#ifndef __ASSEMBLY__
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+struct pt_regs {
+        long orig_pc;
+        long ipend;
+        long seqstat;
+        long rete;
+        long retn;
+        long retx;
+        long pc;                /* PC == RETI */
+        long rets;
+        long reserved;          /* Used as scratch during system calls */
+        long astat;
+        long lb1;
+        long lb0;
+        long lt1;
+        long lt0;
+        long lc1;
+        long lc0;
+        long a1w;
+        long a1x;
+        long a0w;
+        long a0x;
+        long b3;
+        long b2;
+        long b1;
+        long b0;
+        long l3;
+        long l2;
+        long l1;
+        long l0;
+        long m3;
+        long m2;
+        long m1;
+        long m0;
+        long i3;
+        long i2;
+        long i1;
+        long i0;
+        long usp;
+        long fp;
+        long p5;
+        long p4;
+        long p3;
+        long p2;
+        long p1;
+        long p0;
+        long r7;
+        long r6;
+        long r5;
+        long r4;
+        long r3;
+        long r2;
+        long r1;
+        long r0;
+        long orig_r0;
+        long orig_p0;
+        long syscfg;
+};
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13    /* ptrace signal  */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+#define PTRACE_GETFDPIC           31
+#define PTRACE_GETFDPIC_EXEC      0
+#define PTRACE_GETFDPIC_INTERP    1
+#endif
+#define PS_S  (0x0002)
+/* user_mode returns true if only one bit is set in IPEND, other than the
+   master interrupt enable.  */
+#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif                          /* __ASSEMBLY__ */
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+#define PT_R0 204
+#define PT_R1 200
+#define PT_R2 196
+#define PT_R3 192
+#define PT_R4 188
+#define PT_R5 184
+#define PT_R6 180
+#define PT_R7 176
+#define PT_P0 172
+#define PT_P1 168
+#define PT_P2 164
+#define PT_P3 160
+#define PT_P4 156
+#define PT_P5 152
+#define PT_FP 148
+#define PT_USP 144
+#define PT_I0 140
+#define PT_I1 136
+#define PT_I2 132
+#define PT_I3 128
+#define PT_M0 124
+#define PT_M1 120
+#define PT_M2 116
+#define PT_M3 112
+#define PT_L0 108
+#define PT_L1 104
+#define PT_L2 100
+#define PT_L3 96
+#define PT_B0 92
+#define PT_B1 88
+#define PT_B2 84
+#define PT_B3 80
+#define PT_A0X 76
+#define PT_A0W 72
+#define PT_A1X 68
+#define PT_A1W 64
+#define PT_LC0 60
+#define PT_LC1 56
+#define PT_LT0 52
+#define PT_LT1 48
+#define PT_LB0 44
+#define PT_LB1 40
+#define PT_ASTAT 36
+#define PT_RESERVED 32
+#define PT_RETS 28
+#define PT_PC 24
+#define PT_RETX 20
+#define PT_RETN 16
+#define PT_RETE 12
+#define PT_SEQSTAT 8
+#define PT_IPEND 4
+#define PT_SYSCFG 216
+#define PT_TEXT_ADDR 220
+#define PT_TEXT_END_ADDR 224
+#define PT_DATA_ADDR 228
+#define PT_FDPIC_EXEC 232
+#define PT_FDPIC_INTERP 236
+#endif                          /* _BFIN_PTRACE_H */

diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h new file mode 100644 index 000000000000..b8346cd3a6f6 --- /dev/null +++ b/include/asm-blackfin/ptrace.h
@@ -0,0 +1,166 @@
	1	#ifndef _BFIN_PTRACE_H
	2	#define _BFIN_PTRACE_H
	3
	4	/*
	5	* GCC defines register number like this:
	6	* -----------------------------
	7	* 0 - 7 are data registers R0-R7
	8	* 8 - 15 are address registers P0-P7
	9	* 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
	10	* 32 - 33 A registers A0 & A1
	11	* 34 - status register
	12	* -----------------------------
	13	*
	14	* We follows above, except:
	15	* 32-33 --- Low 32-bit of A0&1
	16	* 34-35 --- High 8-bit of A0&1
	17	*/
	18
	19	#ifndef __ASSEMBLY__
	20
	21	/* this struct defines the way the registers are stored on the
	22	stack during a system call. */
	23
	24	struct pt_regs {
	25	long orig_pc;
	26	long ipend;
	27	long seqstat;
	28	long rete;
	29	long retn;
	30	long retx;
	31	long pc; /* PC == RETI */
	32	long rets;
	33	long reserved; /* Used as scratch during system calls */
	34	long astat;
	35	long lb1;
	36	long lb0;
	37	long lt1;
	38	long lt0;
	39	long lc1;
	40	long lc0;
	41	long a1w;
	42	long a1x;
	43	long a0w;
	44	long a0x;
	45	long b3;
	46	long b2;
	47	long b1;
	48	long b0;
	49	long l3;
	50	long l2;
	51	long l1;
	52	long l0;
	53	long m3;
	54	long m2;
	55	long m1;
	56	long m0;
	57	long i3;
	58	long i2;
	59	long i1;
	60	long i0;
	61	long usp;
	62	long fp;
	63	long p5;
	64	long p4;
	65	long p3;
	66	long p2;
	67	long p1;
	68	long p0;
	69	long r7;
	70	long r6;
	71	long r5;
	72	long r4;
	73	long r3;
	74	long r2;
	75	long r1;
	76	long r0;
	77	long orig_r0;
	78	long orig_p0;
	79	long syscfg;
	80	};
	81
	82	/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
	83	#define PTRACE_GETREGS 12
	84	#define PTRACE_SETREGS 13 /* ptrace signal */
	85
	86	#ifdef CONFIG_BINFMT_ELF_FDPIC
	87	#define PTRACE_GETFDPIC 31
	88	#define PTRACE_GETFDPIC_EXEC 0
	89	#define PTRACE_GETFDPIC_INTERP 1
	90	#endif
	91
	92	#define PS_S (0x0002)
	93
	94	/* user_mode returns true if only one bit is set in IPEND, other than the
	95	master interrupt enable. */
	96	#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
	97	#define instruction_pointer(regs) ((regs)->pc)
	98	#define profile_pc(regs) instruction_pointer(regs)
	99	extern void show_regs(struct pt_regs *);
	100
	101	#endif /* __ASSEMBLY__ */
	102
	103	/*
	104	* Offsets used by 'ptrace' system call interface.
	105	*/
	106
	107	#define PT_R0 204
	108	#define PT_R1 200
	109	#define PT_R2 196
	110	#define PT_R3 192
	111	#define PT_R4 188
	112	#define PT_R5 184
	113	#define PT_R6 180
	114	#define PT_R7 176
	115	#define PT_P0 172
	116	#define PT_P1 168
	117	#define PT_P2 164
	118	#define PT_P3 160
	119	#define PT_P4 156
	120	#define PT_P5 152
	121	#define PT_FP 148
	122	#define PT_USP 144
	123	#define PT_I0 140
	124	#define PT_I1 136
	125	#define PT_I2 132
	126	#define PT_I3 128
	127	#define PT_M0 124
	128	#define PT_M1 120
	129	#define PT_M2 116
	130	#define PT_M3 112
	131	#define PT_L0 108
	132	#define PT_L1 104
	133	#define PT_L2 100
	134	#define PT_L3 96
	135	#define PT_B0 92
	136	#define PT_B1 88
	137	#define PT_B2 84
	138	#define PT_B3 80
	139	#define PT_A0X 76
	140	#define PT_A0W 72
	141	#define PT_A1X 68
	142	#define PT_A1W 64
	143	#define PT_LC0 60
	144	#define PT_LC1 56
	145	#define PT_LT0 52
	146	#define PT_LT1 48
	147	#define PT_LB0 44
	148	#define PT_LB1 40
	149	#define PT_ASTAT 36
	150	#define PT_RESERVED 32
	151	#define PT_RETS 28
	152	#define PT_PC 24
	153	#define PT_RETX 20
	154	#define PT_RETN 16
	155	#define PT_RETE 12
	156	#define PT_SEQSTAT 8
	157	#define PT_IPEND 4
	158
	159	#define PT_SYSCFG 216
	160	#define PT_TEXT_ADDR 220
	161	#define PT_TEXT_END_ADDR 224
	162	#define PT_DATA_ADDR 228
	163	#define PT_FDPIC_EXEC 232
	164	#define PT_FDPIC_INTERP 236
	165
	166	#endif /* _BFIN_PTRACE_H */