77 files changed, 2542 insertions, 1150 deletions

diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h
index ff93df516d6d..1e5a8caca2d1 100644
--- a/include/asm-arm/arch-at91/at91_ecc.h
+++ b/include/asm-arm/arch-at91/at91_ecc.h
@@ -13,26 +13,26 @@
 #ifndef AT91_ECC_H
 #define AT91_ECC_H
 
-#define AT91_ECC_CR             (AT91_ECC + 0x00)       /* Control register */
+#define AT91_ECC_CR             0x00                    /* Control register */
 #define         AT91_ECC_RST            (1 << 0)                /* Reset parity */
 
-#define AT91_ECC_MR             (AT91_ECC + 0x04)       /* Mode register */
+#define AT91_ECC_MR             0x04                    /* Mode register */
 #define         AT91_ECC_PAGESIZE       (3 << 0)                /* Page Size */
 #define                 AT91_ECC_PAGESIZE_528           (0)
 #define                 AT91_ECC_PAGESIZE_1056          (1)
 #define                 AT91_ECC_PAGESIZE_2112          (2)
 #define                 AT91_ECC_PAGESIZE_4224          (3)
 
-#define AT91_ECC_SR             (AT91_ECC + 0x08)       /* Status register */
+#define AT91_ECC_SR             0x08                    /* Status register */
 #define         AT91_ECC_RECERR         (1 << 0)                /* Recoverable Error */
 #define         AT91_ECC_ECCERR         (1 << 1)                /* ECC Single Bit Error */
 #define         AT91_ECC_MULERR         (1 << 2)                /* Multiple Errors */
 
-#define AT91_ECC_PR             (AT91_ECC + 0x0c)       /* Parity register */
+#define AT91_ECC_PR             0x0c                    /* Parity register */
 #define         AT91_ECC_BITADDR        (0xf << 0)              /* Bit Error Address */
 #define         AT91_ECC_WORDADDR       (0xfff << 4)            /* Word Error Address */
 
-#define AT91_ECC_NPR            (AT91_ECC + 0x10)       /* NParity register */
+#define AT91_ECC_NPR            0x10                    /* NParity register */
 #define         AT91_ECC_NPARITY        (0xffff << 0)           /* NParity */
 
 #endif
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index 52cd8e5dabc9..c2b13c280155 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -76,10 +76,17 @@
 #define                 AT91_PMC_PRES_32                (5 << 2)
 #define                 AT91_PMC_PRES_64                (6 << 2)
 #define         AT91_PMC_MDIV           (3 <<  8)               /* Master Clock Division */
-#define                 AT91_PMC_MDIV_1                 (0 << 8)
-#define                 AT91_PMC_MDIV_2                 (1 << 8)
-#define                 AT91_PMC_MDIV_3                 (2 << 8)
-#define                 AT91_PMC_MDIV_4                 (3 << 8)
+#define                 AT91RM9200_PMC_MDIV_1           (0 << 8)        /* [AT91RM9200 only] */
+#define                 AT91RM9200_PMC_MDIV_2           (1 << 8)
+#define                 AT91RM9200_PMC_MDIV_3           (2 << 8)
+#define                 AT91RM9200_PMC_MDIV_4           (3 << 8)
+#define                 AT91SAM9_PMC_MDIV_1             (0 << 8)        /* [SAM9,CAP9 only] */
+#define                 AT91SAM9_PMC_MDIV_2             (1 << 8)
+#define                 AT91SAM9_PMC_MDIV_4             (2 << 8)
+#define                 AT91SAM9_PMC_MDIV_6             (3 << 8)
+#define         AT91_PMC_PDIV           (1 << 12)               /* Processor Clock Division [some SAM9 only] */
+#define                 AT91_PMC_PDIV_1                 (0 << 12)
+#define                 AT91_PMC_PDIV_2                 (1 << 12)
 
 #define AT91_PMC_PCKR(n)        (AT91_PMC + 0x40 + ((n) * 4))   /* Programmable Clock 0-3 Registers */
 
diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h
index 01b433de2272..581fa41d90e8 100644
--- a/include/asm-arm/arch-at91/at91_shdwc.h
+++ b/include/asm-arm/arch-at91/at91_shdwc.h
@@ -24,10 +24,12 @@
 #define                 AT91_SHDW_WKMODE0_LOW           2
 #define                 AT91_SHDW_WKMODE0_ANYLEVEL      3
 #define         AT91_SHDW_CPTWK0        (0xf << 4)              /* Counter On Wake Up 0 */
+#define                 AT91_SHDW_CPTWK0_(x)    ((x) << 4)
 #define         AT91_SHDW_RTTWKEN       (1   << 16)             /* Real Time Timer Wake-up Enable */
 
 #define AT91_SHDW_SR            (AT91_SHDWC + 0x08)     /* Shut Down Status Register */
 #define         AT91_SHDW_WAKEUP0       (1 <<  0)               /* Wake-up 0 Status */
 #define         AT91_SHDW_RTTWK         (1 << 16)               /* Real-time Timer Wake-up */
+#define         AT91_SHDW_RTCWK         (1 << 17)               /* Real-time Clock Wake-up [SAM9RL] */
 
 #endif
diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
new file mode 100644
index 000000000000..efdb23af1ee4
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
@@ -0,0 +1,100 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+ *
+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_DDRSDR_H
+#define AT91CAP9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR         (AT91_DDRSDRC + 0x00)   /* Mode Register */
+#define         AT91_DDRSDRC_MODE       (0xf << 0)              /* Command Mode */
+#define                 AT91_DDRSDRC_MODE_NORMAL                0
+#define                 AT91_DDRSDRC_MODE_NOP           1
+#define                 AT91_DDRSDRC_MODE_PRECHARGE     2
+#define                 AT91_DDRSDRC_MODE_LMR           3
+#define                 AT91_DDRSDRC_MODE_REFRESH       4
+#define                 AT91_DDRSDRC_MODE_EXT_LMR       5
+#define                 AT91_DDRSDRC_MODE_DEEP          6
+
+#define AT91_DDRSDRC_RTR        (AT91_DDRSDRC + 0x04)   /* Refresh Timer Register */
+#define         AT91_DDRSDRC_COUNT      (0xfff << 0)            /* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR         (AT91_DDRSDRC + 0x08)   /* Configuration Register */
+#define         AT91_DDRSDRC_NC         (3 << 0)                /* Number of Column Bits */
+#define                 AT91_DDRSDRC_NC_SDR8    (0 << 0)
+#define                 AT91_DDRSDRC_NC_SDR9    (1 << 0)
+#define                 AT91_DDRSDRC_NC_SDR10   (2 << 0)
+#define                 AT91_DDRSDRC_NC_SDR11   (3 << 0)
+#define                 AT91_DDRSDRC_NC_DDR9    (0 << 0)
+#define                 AT91_DDRSDRC_NC_DDR10   (1 << 0)
+#define                 AT91_DDRSDRC_NC_DDR11   (2 << 0)
+#define                 AT91_DDRSDRC_NC_DDR12   (3 << 0)
+#define         AT91_DDRSDRC_NR         (3 << 2)                /* Number of Row Bits */
+#define                 AT91_DDRSDRC_NR_11      (0 << 2)
+#define                 AT91_DDRSDRC_NR_12      (1 << 2)
+#define                 AT91_DDRSDRC_NR_13      (2 << 2)
+#define         AT91_DDRSDRC_CAS        (7 << 4)                /* CAS Latency */
+#define                 AT91_DDRSDRC_CAS_2      (2 << 4)
+#define                 AT91_DDRSDRC_CAS_3      (3 << 4)
+#define                 AT91_DDRSDRC_CAS_25     (6 << 4)
+#define         AT91_DDRSDRC_DLL        (1 << 7)                /* Reset DLL */
+#define         AT91_DDRSDRC_DICDS      (1 << 8)                /* Output impedance control */
+
+#define AT91_DDRSDRC_T0PR       (AT91_DDRSDRC + 0x0C)   /* Timing 0 Register */
+#define         AT91_DDRSDRC_TRAS       (0xf <<  0)             /* Active to Precharge delay */
+#define         AT91_DDRSDRC_TRCD       (0xf <<  4)             /* Row to Column delay */
+#define         AT91_DDRSDRC_TWR        (0xf <<  8)             /* Write recovery delay */
+#define         AT91_DDRSDRC_TRC        (0xf << 12)             /* Row cycle delay */
+#define         AT91_DDRSDRC_TRP        (0xf << 16)             /* Row precharge delay */
+#define         AT91_DDRSDRC_TRRD       (0xf << 20)             /* Active BankA to BankB */
+#define         AT91_DDRSDRC_TWTR       (1   << 24)             /* Internal Write to Read delay */
+#define         AT91_DDRSDRC_TMRD       (0xf << 28)             /* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR       (AT91_DDRSDRC + 0x10)   /* Timing 1 Register */
+#define         AT91_DDRSDRC_TRFC       (0x1f << 0)             /* Row Cycle Delay */
+#define         AT91_DDRSDRC_TXSNR      (0xff << 8)             /* Exit self-refresh to non-read */
+#define         AT91_DDRSDRC_TXSRD      (0xff << 16)            /* Exit self-refresh to read */
+#define         AT91_DDRSDRC_TXP        (0xf  << 24)            /* Exit power-down delay */
+
+#define AT91_DDRSDRC_LPR        (AT91_DDRSDRC + 0x18)   /* Low Power Register */
+#define         AT91_DDRSDRC_LPCB               (3 << 0)        /* Low-power Configurations */
+#define                 AT91_DDRSDRC_LPCB_DISABLE               0
+#define                 AT91_DDRSDRC_LPCB_SELF_REFRESH          1
+#define                 AT91_DDRSDRC_LPCB_POWER_DOWN            2
+#define                 AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN       3
+#define         AT91_DDRSDRC_CLKFR              (1 << 2)        /* Clock Frozen */
+#define         AT91_DDRSDRC_PASR               (7 << 4)        /* Partial Array Self Refresh */
+#define         AT91_DDRSDRC_TCSR               (3 << 8)        /* Temperature Compensated Self Refresh */
+#define         AT91_DDRSDRC_DS                 (3 << 10)       /* Drive Strength */
+#define         AT91_DDRSDRC_TIMEOUT            (3 << 12)       /* Time to define when Low Power Mode is enabled */
+#define                 AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES       (0 << 12)
+#define                 AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES      (1 << 12)
+#define                 AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES     (2 << 12)
+
+#define AT91_DDRSDRC_MDR        (AT91_DDRSDRC + 0x1C)   /* Memory Device Register */
+#define         AT91_DDRSDRC_MD         (3 << 0)                /* Memory Device Type */
+#define                 AT91_DDRSDRC_MD_SDR             0
+#define                 AT91_DDRSDRC_MD_LOW_POWER_SDR   1
+#define                 AT91_DDRSDRC_MD_DDR             2
+#define                 AT91_DDRSDRC_MD_LOW_POWER_DDR   3
+
+#define AT91_DDRSDRC_DLLR       (AT91_DDRSDRC + 0x20)   /* DLL Information Register */
+#define         AT91_DDRSDRC_MDINC      (1 << 0)                /* Master Delay increment */
+#define         AT91_DDRSDRC_MDDEC      (1 << 1)                /* Master Delay decrement */
+#define         AT91_DDRSDRC_MDOVF      (1 << 2)                /* Master Delay Overflow */
+#define         AT91_DDRSDRC_SDCOVF     (1 << 3)                /* Slave Delay Correction Overflow */
+#define         AT91_DDRSDRC_SDCUDF     (1 << 4)                /* Slave Delay Correction Underflow */
+#define         AT91_DDRSDRC_SDERF      (1 << 5)                /* Slave Delay Correction error */
+#define         AT91_DDRSDRC_MDVAL      (0xff <<  8)            /* Master Delay value */
+#define         AT91_DDRSDRC_SDVAL      (0xff << 16)            /* Slave Delay value */
+#define         AT91_DDRSDRC_SDCVAL     (0xff << 24)            /* Slave Delay Correction value */
+
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h
index d82631c251f1..d3b8b3da6b4d 100644
--- a/include/asm-arm/arch-at91/at91sam926x_mc.h
+++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h
@@ -1,7 +1,7 @@
 /*
- * include/asm-arm/arch-at91/at91sam926x_mc.h
+ * include/asm-arm/arch-at91/at91sam9_sdramc.h
  *
- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -10,8 +10,8 @@
  * (at your option) any later version.
  */
 
-#ifndef AT91SAM926x_MC_H
-#define AT91SAM926x_MC_H
+#ifndef AT91SAM9_SDRAMC_H
+#define AT91SAM9_SDRAMC_H
 
 /* SDRAM Controller (SDRAMC) registers */
 #define AT91_SDRAMC_MR          (AT91_SDRAMC + 0x00)    /* SDRAM Controller Mode Register */
@@ -62,7 +62,7 @@
 #define                 AT91_SDRAMC_LPCB_DEEP_POWER_DOWN        3
 #define         AT91_SDRAMC_PASR                (7 << 4)        /* Partial Array Self Refresh */
 #define         AT91_SDRAMC_TCSR                (3 << 8)        /* Temperature Compensated Self Refresh */
-#define         AT91_SDRAMC_DS                  (3 << 10)       /* Drive Strenght */
+#define         AT91_SDRAMC_DS                  (3 << 10)       /* Drive Strength */
 #define         AT91_SDRAMC_TIMEOUT             (3 << 12)       /* Time to define when Low Power Mode is enabled */
 #define                 AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES        (0 << 12)
 #define                 AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES       (1 << 12)
@@ -80,62 +80,4 @@
 #define                 AT91_SDRAMC_MD_LOW_POWER_SDRAM  1
 
 
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_SETUP(n)       (AT91_SMC + 0x00 + ((n)*0x10))  /* Setup Register for CS n */
-#define         AT91_SMC_NWESETUP       (0x3f << 0)                     /* NWE Setup Length */
-#define                 AT91_SMC_NWESETUP_(x)   ((x) << 0)
-#define         AT91_SMC_NCS_WRSETUP    (0x3f << 8)                     /* NCS Setup Length in Write Access */
-#define                 AT91_SMC_NCS_WRSETUP_(x)        ((x) << 8)
-#define         AT91_SMC_NRDSETUP       (0x3f << 16)                    /* NRD Setup Length */
-#define                 AT91_SMC_NRDSETUP_(x)   ((x) << 16)
-#define         AT91_SMC_NCS_RDSETUP    (0x3f << 24)                    /* NCS Setup Length in Read Access */
-#define                 AT91_SMC_NCS_RDSETUP_(x)        ((x) << 24)
-
-#define AT91_SMC_PULSE(n)       (AT91_SMC + 0x04 + ((n)*0x10))  /* Pulse Register for CS n */
-#define         AT91_SMC_NWEPULSE       (0x7f <<  0)                    /* NWE Pulse Length */
-#define                 AT91_SMC_NWEPULSE_(x)   ((x) << 0)
-#define         AT91_SMC_NCS_WRPULSE    (0x7f <<  8)                    /* NCS Pulse Length in Write Access */
-#define                 AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define         AT91_SMC_NRDPULSE       (0x7f << 16)                    /* NRD Pulse Length */
-#define                 AT91_SMC_NRDPULSE_(x)   ((x) << 16)
-#define         AT91_SMC_NCS_RDPULSE    (0x7f << 24)                    /* NCS Pulse Length in Read Access */
-#define                 AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n)       (AT91_SMC + 0x08 + ((n)*0x10))  /* Cycle Register for CS n */
-#define         AT91_SMC_NWECYCLE       (0x1ff << 0 )                   /* Total Write Cycle Length */
-#define                 AT91_SMC_NWECYCLE_(x)   ((x) << 0)
-#define         AT91_SMC_NRDCYCLE       (0x1ff << 16)                   /* Total Read Cycle Length */
-#define                 AT91_SMC_NRDCYCLE_(x)   ((x) << 16)
-
-#define AT91_SMC_MODE(n)        (AT91_SMC + 0x0c + ((n)*0x10))  /* Mode Register for CS n */
-#define         AT91_SMC_READMODE       (1 <<  0)                       /* Read Mode */
-#define         AT91_SMC_WRITEMODE      (1 <<  1)                       /* Write Mode */
-#define         AT91_SMC_EXNWMODE       (3 <<  4)                       /* NWAIT Mode */
-#define                 AT91_SMC_EXNWMODE_DISABLE       (0 << 4)
-#define                 AT91_SMC_EXNWMODE_FROZEN        (2 << 4)
-#define                 AT91_SMC_EXNWMODE_READY         (3 << 4)
-#define         AT91_SMC_BAT            (1 <<  8)                       /* Byte Access Type */
-#define                 AT91_SMC_BAT_SELECT             (0 << 8)
-#define                 AT91_SMC_BAT_WRITE              (1 << 8)
-#define         AT91_SMC_DBW            (3 << 12)                       /* Data Bus Width */
-#define                 AT91_SMC_DBW_8                  (0 << 12)
-#define                 AT91_SMC_DBW_16                 (1 << 12)
-#define                 AT91_SMC_DBW_32                 (2 << 12)
-#define         AT91_SMC_TDF            (0xf << 16)                     /* Data Float Time. */
-#define                 AT91_SMC_TDF_(x)                ((x) << 16)
-#define         AT91_SMC_TDFMODE        (1 << 20)                       /* TDF Optimization - Enabled */
-#define         AT91_SMC_PMEN           (1 << 24)                       /* Page Mode Enabled */
-#define         AT91_SMC_PS             (3 << 28)                       /* Page Size */
-#define                 AT91_SMC_PS_4                   (0 << 28)
-#define                 AT91_SMC_PS_8                   (1 << 28)
-#define                 AT91_SMC_PS_16                  (2 << 28)
-#define                 AT91_SMC_PS_32                  (3 << 28)
-
-#if defined(AT91_SMC1)          /* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n)      (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n)      (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n)      (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n)       (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#endif
-
 #endif
diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h
new file mode 100644
index 000000000000..9e49eed31e50
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9_smc.h
@@ -0,0 +1,73 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9_smc.h
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SMC_H
+#define AT91SAM9_SMC_H
+
+#define AT91_SMC_SETUP(n)       (AT91_SMC + 0x00 + ((n)*0x10))  /* Setup Register for CS n */
+#define         AT91_SMC_NWESETUP       (0x3f << 0)                     /* NWE Setup Length */
+#define                 AT91_SMC_NWESETUP_(x)   ((x) << 0)
+#define         AT91_SMC_NCS_WRSETUP    (0x3f << 8)                     /* NCS Setup Length in Write Access */
+#define                 AT91_SMC_NCS_WRSETUP_(x)        ((x) << 8)
+#define         AT91_SMC_NRDSETUP       (0x3f << 16)                    /* NRD Setup Length */
+#define                 AT91_SMC_NRDSETUP_(x)   ((x) << 16)
+#define         AT91_SMC_NCS_RDSETUP    (0x3f << 24)                    /* NCS Setup Length in Read Access */
+#define                 AT91_SMC_NCS_RDSETUP_(x)        ((x) << 24)
+
+#define AT91_SMC_PULSE(n)       (AT91_SMC + 0x04 + ((n)*0x10))  /* Pulse Register for CS n */
+#define         AT91_SMC_NWEPULSE       (0x7f <<  0)                    /* NWE Pulse Length */
+#define                 AT91_SMC_NWEPULSE_(x)   ((x) << 0)
+#define         AT91_SMC_NCS_WRPULSE    (0x7f <<  8)                    /* NCS Pulse Length in Write Access */
+#define                 AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define         AT91_SMC_NRDPULSE       (0x7f << 16)                    /* NRD Pulse Length */
+#define                 AT91_SMC_NRDPULSE_(x)   ((x) << 16)
+#define         AT91_SMC_NCS_RDPULSE    (0x7f << 24)                    /* NCS Pulse Length in Read Access */
+#define                 AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)       (AT91_SMC + 0x08 + ((n)*0x10))  /* Cycle Register for CS n */
+#define         AT91_SMC_NWECYCLE       (0x1ff << 0 )                   /* Total Write Cycle Length */
+#define                 AT91_SMC_NWECYCLE_(x)   ((x) << 0)
+#define         AT91_SMC_NRDCYCLE       (0x1ff << 16)                   /* Total Read Cycle Length */
+#define                 AT91_SMC_NRDCYCLE_(x)   ((x) << 16)
+
+#define AT91_SMC_MODE(n)        (AT91_SMC + 0x0c + ((n)*0x10))  /* Mode Register for CS n */
+#define         AT91_SMC_READMODE       (1 <<  0)                       /* Read Mode */
+#define         AT91_SMC_WRITEMODE      (1 <<  1)                       /* Write Mode */
+#define         AT91_SMC_EXNWMODE       (3 <<  4)                       /* NWAIT Mode */
+#define                 AT91_SMC_EXNWMODE_DISABLE       (0 << 4)
+#define                 AT91_SMC_EXNWMODE_FROZEN        (2 << 4)
+#define                 AT91_SMC_EXNWMODE_READY         (3 << 4)
+#define         AT91_SMC_BAT            (1 <<  8)                       /* Byte Access Type */
+#define                 AT91_SMC_BAT_SELECT             (0 << 8)
+#define                 AT91_SMC_BAT_WRITE              (1 << 8)
+#define         AT91_SMC_DBW            (3 << 12)                       /* Data Bus Width */
+#define                 AT91_SMC_DBW_8                  (0 << 12)
+#define                 AT91_SMC_DBW_16                 (1 << 12)
+#define                 AT91_SMC_DBW_32                 (2 << 12)
+#define         AT91_SMC_TDF            (0xf << 16)                     /* Data Float Time. */
+#define                 AT91_SMC_TDF_(x)                ((x) << 16)
+#define         AT91_SMC_TDFMODE        (1 << 20)                       /* TDF Optimization - Enabled */
+#define         AT91_SMC_PMEN           (1 << 24)                       /* Page Mode Enabled */
+#define         AT91_SMC_PS             (3 << 28)                       /* Page Size */
+#define                 AT91_SMC_PS_4                   (0 << 28)
+#define                 AT91_SMC_PS_8                   (1 << 28)
+#define                 AT91_SMC_PS_16                  (2 << 28)
+#define                 AT91_SMC_PS_32                  (3 << 28)
+
+#if defined(AT91_SMC1)          /* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)      (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)      (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)      (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)       (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
index 9b1864bbd9a8..186e7c715f8a 100644
--- a/include/asm-arm/arch-ep93xx/gpio.h
+++ b/include/asm-arm/arch-ep93xx/gpio.h
@@ -101,30 +101,17 @@
 
 /* new generic GPIO API - see Documentation/gpio.txt */
 
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-        if (gpio > EP93XX_GPIO_LINE_MAX)
-                return -EINVAL;
-        return 0;
-}
+#include <asm-generic/gpio.h>
 
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
 
 /*
  * Map GPIO A0..A7  (0..7)  to irq 64..71,
  *          B0..B7  (7..15) to irq 72..79, and
  *          F0..F7 (16..24) to irq 80..87.
  */
-
 static inline int gpio_to_irq(unsigned gpio)
 {
         if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h
index b0364dce463f..7ad2c656e162 100644
--- a/include/asm-arm/arch-ks8695/devices.h
+++ b/include/asm-arm/arch-ks8695/devices.h
@@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan(void);
 extern void __init ks8695_add_device_lan(void);
 extern void __init ks8695_add_device_hpna(void);
 
+ /* LEDs */
+extern short ks8695_leds_cpu;
+extern short ks8695_leds_timer;
+extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
+
  /* PCI */
 #define KS8695_MODE_PCI         0
 #define KS8695_MODE_MINIPCI     1
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h
index be29b83ad4ae..8590127760a8 100644
--- a/include/asm-arm/arch-mxc/board-mx31ads.h
+++ b/include/asm-arm/arch-mxc/board-mx31ads.h
@@ -11,107 +11,77 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
 #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
 
-/*!
- * @name PBC Controller parameters
- */
-/*! @{ */
-/*!
- * Base address of PBC controller
- */
+/* Base address of PBC controller */
 #define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
 /* Offsets for the PBC Controller register */
-/*!
- * PBC Board status register offset
- */
+
+/* PBC Board status register offset */
 #define PBC_BSTAT               0x000002
-/*!
- * PBC Board control register 1 set address.
- */
+
+/* PBC Board control register 1 set address */
 #define PBC_BCTRL1_SET          0x000004
-/*!
- * PBC Board control register 1 clear address.
- */
+
+/* PBC Board control register 1 clear address */
 #define PBC_BCTRL1_CLEAR        0x000006
-/*!
- * PBC Board control register 2 set address.
- */
+
+/* PBC Board control register 2 set address */
 #define PBC_BCTRL2_SET          0x000008
-/*!
- * PBC Board control register 2 clear address.
- */
+
+/* PBC Board control register 2 clear address */
 #define PBC_BCTRL2_CLEAR        0x00000A
-/*!
- * PBC Board control register 3 set address.
- */
+
+/* PBC Board control register 3 set address */
 #define PBC_BCTRL3_SET          0x00000C
-/*!
- * PBC Board control register 3 clear address.
- */
+
+/* PBC Board control register 3 clear address */
 #define PBC_BCTRL3_CLEAR        0x00000E
-/*!
- * PBC Board control register 4 set address.
- */
+
+/* PBC Board control register 4 set address */
 #define PBC_BCTRL4_SET          0x000010
-/*!
- * PBC Board control register 4 clear address.
- */
+
+/* PBC Board control register 4 clear address */
 #define PBC_BCTRL4_CLEAR        0x000012
-/*!
- * PBC Board status register 1.
- */
+
+/* PBC Board status register 1 */
 #define PBC_BSTAT1              0x000014
-/*!
- * PBC Board interrupt status register.
- */
+
+/* PBC Board interrupt status register */
 #define PBC_INTSTATUS           0x000016
-/*!
- * PBC Board interrupt current status register.
- */
+
+/* PBC Board interrupt current status register */
 #define PBC_INTCURR_STATUS      0x000018
-/*!
- * PBC Interrupt mask register set address.
- */
+
+/* PBC Interrupt mask register set address */
 #define PBC_INTMASK_SET         0x00001A
-/*!
- * PBC Interrupt mask register clear address.
- */
+
+/* PBC Interrupt mask register clear address */
 #define PBC_INTMASK_CLEAR       0x00001C
 
-/*!
- * External UART A.
- */
+/* External UART A */
 #define PBC_SC16C652_UARTA      0x010000
-/*!
- * External UART B.
- */
+
+/* External UART B */
 #define PBC_SC16C652_UARTB      0x010010
-/*!
- * Ethernet Controller IO base address.
- */
+
+/* Ethernet Controller IO base address */
 #define PBC_CS8900A_IOBASE      0x020000
-/*!
- * Ethernet Controller Memory base address.
- */
+
+/* Ethernet Controller Memory base address */
 #define PBC_CS8900A_MEMBASE     0x021000
-/*!
- * Ethernet Controller DMA base address.
- */
+
+/* Ethernet Controller DMA base address */
 #define PBC_CS8900A_DMABASE     0x022000
-/*!
- * External chip select 0.
- */
+
+/* External chip select 0 */
 #define PBC_XCS0                0x040000
-/*!
- * LCD Display enable.
- */
+
+/* LCD Display enable */
 #define PBC_LCD_EN_B            0x060000
-/*!
- * Code test debug enable.
- */
+
+/* Code test debug enable */
 #define PBC_CODE_B              0x070000
-/*!
- * PSRAM memory select.
- */
+
+/* PSRAM memory select */
 #define PBC_PSRAM_B             0x5000000
 
 #define PBC_INTSTATUS_REG       (PBC_INTSTATUS + PBC_BASE_ADDRESS)
@@ -139,4 +109,4 @@
 
 #define MXC_MAX_EXP_IO_LINES    16
 
-#endif                          /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h
index 65e639d51d2b..c822d569a05e 100644
--- a/include/asm-arm/arch-mxc/dma.h
+++ b/include/asm-arm/arch-mxc/dma.h
@@ -11,11 +11,4 @@
 #ifndef __ASM_ARCH_MXC_DMA_H__
 #define __ASM_ARCH_MXC_DMA_H__
 
-/*!
- * @file dma.h
- * @brief This file contains Unified DMA API for all MXC platforms.
- * The API is platform independent.
- *
- * @ingroup SDMA
- */
 #endif
diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h
index 3c09b92fef0d..e87ff0679d5e 100644
--- a/include/asm-arm/arch-mxc/hardware.h
+++ b/include/asm-arm/arch-mxc/hardware.h
@@ -8,45 +8,24 @@
  * published by the Free Software Foundation.
  */
 
-/*!
- * @file hardware.h
- * @brief This file contains the hardware definitions of the board.
- *
- * @ingroup System
- */
 #ifndef __ASM_ARCH_MXC_HARDWARE_H__
 #define __ASM_ARCH_MXC_HARDWARE_H__
 
 #include <asm/sizes.h>
 
-#include <asm/arch/mx31.h>
+#ifdef CONFIG_ARCH_MX3
+# include <asm/arch/mx31.h>
+#endif
 
 #include <asm/arch/mxc.h>
 
-#define MXC_MAX_GPIO_LINES      (GPIO_NUM_PIN * GPIO_PORT_NUM)
-
 /*
  * ---------------------------------------------------------------------------
  * Board specific defines
  * ---------------------------------------------------------------------------
  */
-#define MXC_EXP_IO_BASE         (MXC_GPIO_INT_BASE + MXC_MAX_GPIO_LINES)
-
-#include <asm/arch/board-mx31ads.h>
-
-#ifndef MXC_MAX_EXP_IO_LINES
-#define MXC_MAX_EXP_IO_LINES 0
+#ifdef CONFIG_MACH_MX31ADS
+# include <asm/arch/board-mx31ads.h>
 #endif
 
-#define MXC_MAX_VIRTUAL_INTS    16
-#define MXC_VIRTUAL_INTS_BASE   (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
-#define MXC_SDIO1_CARD_IRQ      MXC_VIRTUAL_INTS_BASE
-#define MXC_SDIO2_CARD_IRQ      (MXC_VIRTUAL_INTS_BASE + 1)
-#define MXC_SDIO3_CARD_IRQ      (MXC_VIRTUAL_INTS_BASE + 2)
-
-#define MXC_MAX_INTS            (MXC_MAX_INT_LINES + \
-                                MXC_MAX_GPIO_LINES + \
-                                MXC_MAX_EXP_IO_LINES + \
-                                MXC_MAX_VIRTUAL_INTS)
-
-#endif                          /* __ASM_ARCH_MXC_HARDWARE_H__ */
+#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h
index cf6c83a4b9f7..65b6810124c1 100644
--- a/include/asm-arm/arch-mxc/io.h
+++ b/include/asm-arm/arch-mxc/io.h
@@ -8,24 +8,13 @@
  * published by the Free Software Foundation.
  */
 
-/*!
- * @file io.h
- * @brief This file contains some memory mapping macros.
- * @note There is no real ISA or PCI buses. But have to define these macros
- * for some drivers to compile.
- *
- * @ingroup System
- */
-
 #ifndef __ASM_ARCH_MXC_IO_H__
 #define __ASM_ARCH_MXC_IO_H__
 
-/*! Allow IO space to be anywhere in the memory */
+/* Allow IO space to be anywhere in the memory */
 #define IO_SPACE_LIMIT 0xffffffff
 
-/*!
- * io address mapping macro
- */
+/* io address mapping macro */
 #define __io(a)                 ((void __iomem *)(a))
 
 #define __mem_pci(a)            (a)
diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h
index e4686c6bc4bf..b2c5205e1962 100644
--- a/include/asm-arm/arch-mxc/irqs.h
+++ b/include/asm-arm/arch-mxc/irqs.h
@@ -13,26 +13,17 @@
 
 #include <asm/hardware.h>
 
-/*!
- * @file irqs.h
- * @brief This file defines the number of normal interrupts and fast interrupts
- *
- * @ingroup Interrupt
- */
-
 #define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_EXP_IO_BASE)
 
 #define MXC_IRQ_TO_GPIO(irq)    ((irq) - MXC_GPIO_INT_BASE)
 #define MXC_GPIO_TO_IRQ(x)      (MXC_GPIO_INT_BASE + x)
 
-/*!
- * Number of normal interrupts
- */
-#define NR_IRQS         MXC_MAX_INTS
+/* Number of normal interrupts */
+#define NR_IRQS         (MXC_MAX_INT_LINES + \
+                        MXC_MAX_GPIO_LINES + \
+                        MXC_MAX_VIRTUAL_INTS)
 
-/*!
- * Number of fast interrupts
- */
+/* Number of fast interrupts */
 #define NR_FIQS         MXC_MAX_INTS
 
-#endif                          /* __ASM_ARCH_MXC_IRQS_H__ */
+#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h
index c89aac83a407..059f83023a10 100644
--- a/include/asm-arm/arch-mxc/memory.h
+++ b/include/asm-arm/arch-mxc/memory.h
@@ -13,24 +13,17 @@
 
 #include <asm/hardware.h>
 
-/*!
- * @file memory.h
- * @brief This file contains macros needed by the Linux kernel and drivers.
- *
- * @ingroup Memory
- */
-
-/*!
+/*
  * Virtual view <-> DMA view memory address translations
  * This macro is used to translate the virtual address to an address
  * suitable to be passed to set_dma_addr()
  */
 #define __virt_to_bus(a)        __virt_to_phys(a)
 
-/*!
+/*
  * Used to convert an address for DMA operations to an address that the
  * kernel can use.
  */
 #define __bus_to_virt(a)        __phys_to_virt(a)
 
-#endif                          /* __ASM_ARCH_MXC_MEMORY_H__ */
+#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h
index 85c49c9e5d15..36a1af495bb3 100644
--- a/include/asm-arm/arch-mxc/mx31.h
+++ b/include/asm-arm/arch-mxc/mx31.h
@@ -317,6 +317,8 @@
 #define MXC_MAX_INT_LINES       64
 
 #define MXC_GPIO_INT_BASE       MXC_MAX_INT_LINES
+#define MXC_MAX_GPIO_LINES      (GPIO_NUM_PIN * GPIO_PORT_NUM)
+#define MXC_MAX_VIRTUAL_INTS    16
 
 /*!
  * Number of GPIO port as defined in the IC Spec
@@ -329,7 +331,33 @@
 
 #define PROD_SIGNATURE          0x1     /* For MX31 */
 
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0            0x10
+#define CHIP_REV_1_1            0x11
+#define CHIP_REV_1_2            0x12
+#define CHIP_REV_1_3            0x13
+#define CHIP_REV_2_0            0x20
+#define CHIP_REV_2_1            0x21
+#define CHIP_REV_2_2            0x22
+#define CHIP_REV_2_3            0x23
+#define CHIP_REV_3_0            0x30
+#define CHIP_REV_3_1            0x31
+#define CHIP_REV_3_2            0x32
+
 #define SYSTEM_REV_MIN          CHIP_REV_1_0
 #define SYSTEM_REV_NUM          3
 
-#endif                  /*  __ASM_ARCH_MXC_MX31_H__ */
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+/* this is a i.MX31 CPU */
+#define cpu_is_mx31()           (1)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+        return system_rev;
+}
+#endif
+
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h
index 0837f1f9ca31..146d3f60951a 100644
--- a/include/asm-arm/arch-mxc/mxc.h
+++ b/include/asm-arm/arch-mxc/mxc.h
@@ -15,6 +15,11 @@
 #error "Do not include directly."
 #endif
 
+/* clean up all things that are not used */
+#ifndef CONFIG_ARCH_MX3
+# define cpu_is_mx31() (0)
+#endif
+
 /*
  *****************************************
  * GPT  Register definitions             *
@@ -31,9 +36,7 @@
 #define MXC_GPT_GPTICR2         IO_ADDRESS(GPT1_BASE_ADDR + 0x20)
 #define MXC_GPT_GPTCNT          IO_ADDRESS(GPT1_BASE_ADDR + 0x24)
 
-/*!
- * GPT Control register bit definitions
- */
+/* GPT Control register bit definitions */
 #define GPTCR_FO3                       (1 << 31)
 #define GPTCR_FO2                       (1 << 30)
 #define GPTCR_FO1                       (1 << 29)
@@ -146,4 +149,4 @@
 #define IIM_PROD_REV_SH         3
 #define IIM_PROD_REV_LEN        5
 
-#endif                          /*  __ASM_ARCH_MXC_H__ */
+#endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h
index 109956b41aca..bbfc37465fc5 100644
--- a/include/asm-arm/arch-mxc/system.h
+++ b/include/asm-arm/arch-mxc/system.h
@@ -21,30 +21,14 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
-/*!
- * @file system.h
- * @brief This file contains idle and reset functions.
- *
- * @ingroup System
- */
-
-/*!
- * This function puts the CPU into idle mode. It is called by default_idle()
- * in process.c file.
- */
 static inline void arch_idle(void)
 {
         cpu_do_idle();
 }
 
-/*
- * This function resets the system. It is called by machine_restart().
- *
- * @param  mode         indicates different kinds of resets
- */
 static inline void arch_reset(char mode)
 {
         cpu_reset(0);
 }
 
-#endif                          /* __ASM_ARCH_MXC_SYSTEM_H__ */
+#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h
index 83a73da895eb..62d97623412f 100644
--- a/include/asm-arm/arch-mxc/vmalloc.h
+++ b/include/asm-arm/arch-mxc/vmalloc.h
@@ -20,17 +20,7 @@
 #ifndef __ASM_ARCH_MXC_VMALLOC_H__
 #define __ASM_ARCH_MXC_VMALLOC_H__
 
-/*!
- * @file vmalloc.h
- *
- * @brief This file contains platform specific macros for vmalloc.
- *
- * @ingroup System
- */
-
-/*!
- * vmalloc ending address
- */
+/* vmalloc ending address */
 #define VMALLOC_END       0xF4000000
 
-#endif                          /* __ASM_ARCH_MXC_VMALLOC_H__ */
+#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h
index 716f34fdb716..e57443bdbbd9 100644
--- a/include/asm-arm/arch-ns9xxx/board.h
+++ b/include/asm-arm/arch-ns9xxx/board.h
@@ -1,7 +1,7 @@
 /*
  * include/asm-arm/arch-ns9xxx/board.h
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -13,8 +13,30 @@
 
 #include <asm/mach-types.h>
 
-#define board_is_a9m9750dev()   (machine_is_cc9p9360dev())
+#define board_is_a9m9750dev()   (0                      \
+                || machine_is_cc9p9360dev()             \
+                || machine_is_cc9p9750dev()             \
+                )
 
-#define board_is_jscc9p9360()   (machine_is_cc9p9360js())
+#define board_is_a9mvali()      (0                      \
+                || machine_is_cc9p9360val()             \
+                || machine_is_cc9p9750val()             \
+                )
+
+#define board_is_jscc9p9210()   (0                      \
+                || machine_is_cc9p9210js()              \
+                )
+
+#define board_is_jscc9p9215()   (0                      \
+                || machine_is_cc9p9215js()              \
+                )
+
+#define board_is_jscc9p9360()   (0                      \
+                || machine_is_cc9p9360js()              \
+                )
+
+#define board_is_uncbas()       (0                      \
+                || machine_is_cc7ucamry()               \
+                )
 
 #endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/include/asm-arm/arch-ns9xxx/clock.h b/include/asm-arm/arch-ns9xxx/clock.h
deleted file mode 100644
index b943d3a92a1d..000000000000
--- a/include/asm-arm/arch-ns9xxx/clock.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/clock.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H
-
-#include <asm/arch-ns9xxx/regs-sys.h>
-
-#define CRYSTAL 29491200 /* Hz */
-
-/* The HRM calls this value f_vco */
-static inline u32 ns9xxx_systemclock(void) __attribute__((const));
-static inline u32 ns9xxx_systemclock(void)
-{
-        u32 pll = __raw_readl(SYS_PLL);
-
-        /*
-         * The system clock should be a multiple of HZ * TIMERCLOCKSELECT (in
-         * time.c).
-         *
-         * The following values are given:
-         *   - TIMERCLOCKSELECT == 2^i for an i in {0 .. 6}
-         *   - CRYSTAL == 29491200 == 2^17 * 3^2 * 5^2
-         *   - ND in {0 .. 31}
-         *   - FS in {0 .. 3}
-         *
-         * Assuming the worst, we consider:
-         *   - TIMERCLOCKSELECT == 64
-         *   - ND == 0
-         *   - FS == 3
-         *
-         * So HZ should be a divisor of:
-         *      (CRYSTAL * (ND + 1) >> FS) / TIMERCLOCKSELECT
-         *   == (2^17 * 3^2 * 5^2 * 1 >> 3) / 64
-         *   == 2^8 * 3^2 * 5^2
-         *   == 57600
-         *
-         * Currently HZ is defined to be 100 for this platform.
-         *
-         * Fine.
-         */
-        return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1)
-                >> REGGETIM(pll, SYS_PLL, FS);
-}
-
-static inline u32 ns9xxx_cpuclock(void) __attribute__((const));
-static inline u32 ns9xxx_cpuclock(void)
-{
-        return ns9xxx_systemclock() / 2;
-}
-
-static inline u32 ns9xxx_ahbclock(void) __attribute__((const));
-static inline u32 ns9xxx_ahbclock(void)
-{
-        return ns9xxx_systemclock() / 4;
-}
-
-static inline u32 ns9xxx_bbusclock(void) __attribute__((const));
-static inline u32 ns9xxx_bbusclock(void)
-{
-        return ns9xxx_systemclock() / 8;
-}
-
-#endif /* ifndef __ASM_ARCH_CLOCK_H */
diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S
index 86aec87303e4..89a21c530468 100644
--- a/include/asm-arm/arch-ns9xxx/entry-macro.S
+++ b/include/asm-arm/arch-ns9xxx/entry-macro.S
@@ -1,7 +1,7 @@
 /*
  * include/asm-arm/arch-ns9xxx/entry-macro.S
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -9,16 +9,16 @@
  * the Free Software Foundation.
  */
 #include <asm/hardware.h>
-#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-sys-common.h>
 
                 .macro  get_irqnr_preamble, base, tmp
+                ldr     \base, =SYS_ISRADDR
                 .endm
 
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
 
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \base, =SYS_ISRADDR
                 ldr     \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
                 cmp     \irqstat, #0
                 ldrne   \irqnr, [\base]
diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h
index 25d8d28b27f3..e83d48ec42c9 100644
--- a/include/asm-arm/arch-ns9xxx/irqs.h
+++ b/include/asm-arm/arch-ns9xxx/irqs.h
@@ -1,7 +1,7 @@
 /*
  * include/asm-arm/arch-ns9xxx/irqs.h
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -11,38 +11,39 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#define IRQ_WATCHDOG    0
-#define IRQ_AHBBUSERR   1
-#define IRQ_BBUSAGG     2
+/* NetSilicon 9360 */
+#define IRQ_NS9XXX_WATCHDOG     0
+#define IRQ_NS9XXX_AHBBUSERR    1
+#define IRQ_NS9360_BBUSAGG      2
 /* irq 3 is reserved for NS9360 */
-#define IRQ_ETHRX       4
-#define IRQ_ETHTX       5
-#define IRQ_ETHPHY      6
-#define IRQ_LCD         7
-#define IRQ_SERBRX      8
-#define IRQ_SERBTX      9
-#define IRQ_SERARX      10
-#define IRQ_SERATX      11
-#define IRQ_SERCRX      12
-#define IRQ_SERCTX      13
-#define IRQ_I2C         14
-#define IRQ_BBUSDMA     15
-#define IRQ_TIMER0      16
-#define IRQ_TIMER1      17
-#define IRQ_TIMER2      18
-#define IRQ_TIMER3      19
-#define IRQ_TIMER4      20
-#define IRQ_TIMER5      21
-#define IRQ_TIMER6      22
-#define IRQ_TIMER7      23
-#define IRQ_RTC         24
-#define IRQ_USBHOST     25
-#define IRQ_USBDEVICE   26
-#define IRQ_IEEE1284    27
-#define IRQ_EXT0        28
-#define IRQ_EXT1        29
-#define IRQ_EXT2        30
-#define IRQ_EXT3        31
+#define IRQ_NS9XXX_ETHRX        4
+#define IRQ_NS9XXX_ETHTX        5
+#define IRQ_NS9XXX_ETHPHY       6
+#define IRQ_NS9360_LCD          7
+#define IRQ_NS9360_SERBRX       8
+#define IRQ_NS9360_SERBTX       9
+#define IRQ_NS9360_SERARX       10
+#define IRQ_NS9360_SERATX       11
+#define IRQ_NS9360_SERCRX       12
+#define IRQ_NS9360_SERCTX       13
+#define IRQ_NS9360_I2C          14
+#define IRQ_NS9360_BBUSDMA      15
+#define IRQ_NS9360_TIMER0       16
+#define IRQ_NS9360_TIMER1       17
+#define IRQ_NS9360_TIMER2       18
+#define IRQ_NS9360_TIMER3       19
+#define IRQ_NS9360_TIMER4       20
+#define IRQ_NS9360_TIMER5       21
+#define IRQ_NS9360_TIMER6       22
+#define IRQ_NS9360_TIMER7       23
+#define IRQ_NS9360_RTC          24
+#define IRQ_NS9360_USBHOST      25
+#define IRQ_NS9360_USBDEVICE    26
+#define IRQ_NS9360_IEEE1284     27
+#define IRQ_NS9XXX_EXT0         28
+#define IRQ_NS9XXX_EXT1         29
+#define IRQ_NS9XXX_EXT2         30
+#define IRQ_NS9XXX_EXT3         31
 
 #define BBUS_IRQ(irq)   (32 + irq)
 
@@ -67,7 +68,7 @@
 /*
  * these Interrupts are specific for the a9m9750dev board.
  * They are generated by an FPGA that interrupts the CPU on
- * IRQ_EXT2
+ * IRQ_NS9360_EXT2
  */
 #define FPGA_IRQ(irq)   (64 + irq)
 
diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h
new file mode 100644
index 000000000000..ac08a31111e4
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/module.h
@@ -0,0 +1,60 @@
+/*
+ * include/asm-arm/arch-ns9xxx/module.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_MODULE_H
+#define __ASM_ARCH_MODULE_H
+
+#include <asm/mach-types.h>
+
+#define module_is_cc7ucamry()   (0                      \
+                || machine_is_cc7ucamry()               \
+                )
+
+#define module_is_cc9c()        (0                      \
+                || machine_is_cc9c()                    \
+                )
+
+#define module_is_cc9p9210()    (0                      \
+                || machine_is_cc9p9210()                \
+                || machine_is_cc9p9210js()              \
+                )
+
+#define module_is_cc9p9215()    (0                      \
+                || machine_is_cc9p9215()                \
+                || machine_is_cc9p9215js()              \
+                )
+
+#define module_is_cc9p9360()    (0                      \
+                || machine_is_a9m9360()                 \
+                || machine_is_cc9p9360dev()             \
+                || machine_is_cc9p9360js()              \
+                || machine_is_cc9p9360val()             \
+                )
+
+#define module_is_cc9p9750()    (0                      \
+                || machine_is_a9m9750()                 \
+                || machine_is_cc9p9750dev()             \
+                || machine_is_cc9p9750js()              \
+                || machine_is_cc9p9750val()             \
+                )
+
+#define module_is_ccw9c()       (0                      \
+                || machine_is_ccw9c()                   \
+                )
+
+#define module_is_inc20otter()  (0                      \
+                || machine_is_inc20otter()              \
+                )
+
+#define module_is_otter()       (0                      \
+                || machine_is_otter()                   \
+                )
+
+#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h
new file mode 100644
index 000000000000..f3aa6c50dbe5
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/processor-ns9360.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-ns9xxx/processor-ns9360.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSORNS9360_H
+#define __ASM_ARCH_PROCESSORNS9360_H
+
+#include <linux/init.h>
+
+void ns9360_reset(char mode);
+
+unsigned long ns9360_systemclock(void) __attribute__((const));
+
+static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
+static inline unsigned long ns9360_cpuclock(void)
+{
+        return ns9360_systemclock() / 2;
+}
+
+void __init ns9360_map_io(void);
+
+extern struct sys_timer ns9360_timer;
+
+int ns9360_gpio_configure(unsigned gpio, int inv, int func);
+
+#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h
index 223e51b8e104..f7b53b65de81 100644
--- a/include/asm-arm/arch-ns9xxx/processor.h
+++ b/include/asm-arm/arch-ns9xxx/processor.h
@@ -1,7 +1,7 @@
 /*
  * include/asm-arm/arch-ns9xxx/processor.h
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -11,9 +11,32 @@
 #ifndef __ASM_ARCH_PROCESSOR_H
 #define __ASM_ARCH_PROCESSOR_H
 
-#include <asm/mach-types.h>
+#include <asm/arch-ns9xxx/module.h>
 
-#define processor_is_ns9360()   (machine_is_cc9p9360dev()               \
-                || machine_is_cc9p9360js())
+#define processor_is_ns9210()   (0                      \
+                || module_is_cc7ucamry()                \
+                || module_is_cc9p9210()                 \
+                || module_is_inc20otter()               \
+                || module_is_otter()                    \
+                )
+
+#define processor_is_ns9215()   (0                      \
+                || module_is_cc9p9215()                 \
+                )
+
+#define processor_is_ns9360()   (0                      \
+                || module_is_cc9p9360()                 \
+                || module_is_cc9c()                     \
+                || module_is_ccw9c()                    \
+                )
+
+#define processor_is_ns9750()   (0                      \
+                || module_is_cc9p9750()                 \
+                )
+
+#define processor_is_ns921x()   (0                      \
+                || processor_is_ns9210()                \
+                || processor_is_ns9215()                \
+                )
 
 #endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h
new file mode 100644
index 000000000000..956c57cb781f
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/regs-sys-common.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-arm/arch-ns9xxx/regs-sys-common.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGSSYSCOMMON_H
+#define __ASM_ARCH_REGSSYSCOMMON_H
+#include <asm/hardware.h>
+
+/* Interrupt Vector Address Register Level x */
+#define SYS_IVA(x)      __REG2(0xa09000c4, (x))
+
+/* Interrupt Configuration registers */
+#define SYS_IC(x)       __REG2(0xa0900144, (x))
+
+/* ISRADDR */
+#define SYS_ISRADDR     __REG(0xa0900164)
+
+/* Interrupt Status Active */
+#define SYS_ISA         __REG(0xa0900168)
+
+/* Interrupt Status Raw */
+#define SYS_ISR         __REG(0xa090016c)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
index 749262f86204..318b6945afb6 100644
--- a/include/asm-arm/arch-ns9xxx/regs-sys.h
+++ b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
@@ -1,15 +1,15 @@
 /*
- * include/asm-arm/arch-ns9xxx/regs-sys.h
+ * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
-#ifndef __ASM_ARCH_REGSSYS_H
-#define __ASM_ARCH_REGSSYS_H
+#ifndef __ASM_ARCH_REGSSYSNS9360_H
+#define __ASM_ARCH_REGSSYSNS9360_H
 
 #include <asm/hardware.h>
 
@@ -27,21 +27,6 @@
 /* Timer x Read register */
 #define SYS_TR(x)       __REG2(0xa0900084, (x))
 
-/* Interrupt Vector Address Register Level x */
-#define SYS_IVA(x)      __REG2(0xa09000c4, (x))
-
-/* Interrupt Configuration registers */
-#define SYS_IC(x)       __REG2(0xa0900144, (x))
-
-/* ISRADDR */
-#define SYS_ISRADDR     __REG(0xa0900164)
-
-/* Interrupt Status Active */
-#define SYS_ISA         __REG(0xa0900168)
-
-/* Interrupt Status Raw */
-#define SYS_ISR         __REG(0xa090016c)
-
 /* Timer Interrupt Status register */
 #define SYS_TIS         __REG(0xa0900170)
 
@@ -160,4 +145,4 @@
 #define SYS_EIC_LVEDG_LEVEL             __REGVAL(SYS_EIC_LVEDG, 0)
 #define SYS_EIC_LVEDG_EDGE              __REGVAL(SYS_EIC_LVEDG, 1)
 
-#endif /* ifndef __ASM_ARCH_REGSSYS_H */
+#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h
index c1082bd8977c..1348073afe48 100644
--- a/include/asm-arm/arch-ns9xxx/system.h
+++ b/include/asm-arm/arch-ns9xxx/system.h
@@ -1,7 +1,7 @@
 /*
  * include/asm-arm/arch-ns9xxx/system.h
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -12,8 +12,8 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/proc-fns.h>
-#include <asm/arch-ns9xxx/regs-sys.h>
-#include <asm/mach-types.h>
+#include <asm/arch-ns9xxx/processor.h>
+#include <asm/arch-ns9xxx/processor-ns9360.h>
 
 static inline void arch_idle(void)
 {
@@ -22,11 +22,12 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode)
 {
-        u32 reg;
-
-        reg = __raw_readl(SYS_PLL) >> 16;
-        REGSET(reg, SYS_PLL, SWC, YES);
-        __raw_writel(reg, SYS_PLL);
+#ifdef CONFIG_PROCESSOR_NS9360
+        if (processor_is_ns9360())
+                ns9360_reset(mode);
+        else
+#endif
+                BUG();
 
         BUG();
 }
diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h
index 961ca7dc9954..71066baceab7 100644
--- a/include/asm-arm/arch-ns9xxx/uncompress.h
+++ b/include/asm-arm/arch-ns9xxx/uncompress.h
@@ -11,20 +11,149 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-static void putc(char c)
+#include <asm/io.h>
+
+#define __REG(x)        ((void __iomem __force *)(x))
+
+static void putc_dummy(char c, void __iomem *base)
 {
-        volatile u8 *base = (volatile u8 *)0x40000000;
-        int t = 0x10000;
+        /* nothing */
+}
 
+static void putc_ns9360(char c, void __iomem *base)
+{
+        static int t = 0x10000;
+        do {
+                if (t)
+                        --t;
+
+                if (__raw_readl(base + 8) & (1 << 3)) {
+                        __raw_writeb(c, base + 16);
+                        t = 0x10000;
+                        break;
+                }
+        } while (t);
+}
+
+static void putc_a9m9750dev(char c, void __iomem *base)
+{
+        static int t = 0x10000;
+        do {
+                if (t)
+                        --t;
+
+                if (__raw_readb(base + 5) & (1 << 5)) {
+                        __raw_writeb(c, base);
+                        t = 0x10000;
+                        break;
+                }
+        } while (t);
+
+}
+
+static void putc_ns921x(char c, void __iomem *base)
+{
+        static int t = 0x10000;
         do {
-                if (base[5] & 0x20) {
-                        base[0] = c;
+                if (t)
+                        --t;
+
+                if (!(__raw_readl(base) & (1 << 11))) {
+                        __raw_writeb(c, base + 0x0028);
+                        t = 0x10000;
                         break;
                 }
-        } while (--t);
+        } while (t);
 }
 
-#define arch_decomp_setup()
+#define MSCS __REG(0xA0900184)
+
+#define NS9360_UARTA    __REG(0x90200040)
+#define NS9360_UARTB    __REG(0x90200000)
+#define NS9360_UARTC    __REG(0x90300000)
+#define NS9360_UARTD    __REG(0x90300040)
+
+#define NS9360_UART_ENABLED(base)                                       \
+                (__raw_readl(NS9360_UARTA) & (1 << 31))
+
+#define A9M9750DEV_UARTA        __REG(0x40000000)
+
+#define NS921XSYS_CLOCK __REG(0xa090017c)
+#define NS921X_UARTA    __REG(0x90010000)
+#define NS921X_UARTB    __REG(0x90018000)
+#define NS921X_UARTC    __REG(0x90020000)
+#define NS921X_UARTD    __REG(0x90028000)
+
+#define NS921X_UART_ENABLED(base)                                       \
+                (__raw_readl((base) + 0x1000) & (1 << 29))
+
+static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
+{
+        if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
+                /* ns9360 or ns9750 */
+                if (NS9360_UART_ENABLED(NS9360_UARTA)) {
+                        *putc = putc_ns9360;
+                        *base = NS9360_UARTA;
+                        return;
+                } else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
+                        *putc = putc_ns9360;
+                        *base = NS9360_UARTB;
+                        return;
+                } else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
+                        *putc = putc_ns9360;
+                        *base = NS9360_UARTC;
+                        return;
+                } else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
+                        *putc = putc_ns9360;
+                        *base = NS9360_UARTD;
+                        return;
+                } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
+                        *putc = putc_a9m9750dev;
+                        *base = A9M9750DEV_UARTA;
+                        return;
+                }
+        } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
+                /* ns921x */
+                u32 clock = __raw_readl(NS921XSYS_CLOCK);
+
+                if ((clock & (1 << 1)) &&
+                                NS921X_UART_ENABLED(NS921X_UARTA)) {
+                        *putc = putc_ns921x;
+                        *base = NS921X_UARTA;
+                        return;
+                } else if ((clock & (1 << 2)) &&
+                                NS921X_UART_ENABLED(NS921X_UARTB)) {
+                        *putc = putc_ns921x;
+                        *base = NS921X_UARTB;
+                        return;
+                } else if ((clock & (1 << 3)) &&
+                                NS921X_UART_ENABLED(NS921X_UARTC)) {
+                        *putc = putc_ns921x;
+                        *base = NS921X_UARTC;
+                        return;
+                } else if ((clock & (1 << 4)) &&
+                                NS921X_UART_ENABLED(NS921X_UARTD)) {
+                        *putc = putc_ns921x;
+                        *base = NS921X_UARTD;
+                        return;
+                }
+        }
+
+        *putc = putc_dummy;
+}
+
+void (*myputc)(char, void __iomem *);
+void __iomem *base;
+
+static void putc(char c)
+{
+        myputc(c, base);
+}
+
+static void arch_decomp_setup(void)
+{
+        autodetect(&myputc, &base);
+}
 #define arch_decomp_wdog()
 
 static void flush(void)
diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h
deleted file mode 100644
index e0b8c39b9167..000000000000
--- a/include/asm-arm/arch-orion/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-orion/io.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include "orion.h"
-
-#define IO_SPACE_LIMIT          0xffffffff
-#define IO_SPACE_REMAP          ORION_PCI_SYS_IO_BASE
-
-static inline void __iomem *__io(unsigned long addr)
-{
-        return (void __iomem *)addr;
-}
-
-#define __io(a)                 __io(a)
-#define __mem_pci(a)            (a)
-
-#endif
diff --git a/include/asm-arm/arch-orion/irqs.h b/include/asm-arm/arch-orion/irqs.h
deleted file mode 100644
index eea65ca6076a..000000000000
--- a/include/asm-arm/arch-orion/irqs.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * include/asm-arm/arch-orion/irqs.h
- *
- * IRQ definitions for Orion SoC
- *
- *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- *  This file is licensed under the terms of the GNU General Public
- *  License version 2. This program is licensed "as is" without any
- *  warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H__
-#define __ASM_ARCH_IRQS_H__
-
-#include "orion.h"      /* need GPIO_MAX */
-
-/*
- * Orion Main Interrupt Controller
- */
-#define IRQ_ORION_BRIDGE        0
-#define IRQ_ORION_DOORBELL_H2C  1
-#define IRQ_ORION_DOORBELL_C2H  2
-#define IRQ_ORION_UART0         3
-#define IRQ_ORION_UART1         4
-#define IRQ_ORION_I2C           5
-#define IRQ_ORION_GPIO_0_7      6
-#define IRQ_ORION_GPIO_8_15     7
-#define IRQ_ORION_GPIO_16_23    8
-#define IRQ_ORION_GPIO_24_31    9
-#define IRQ_ORION_PCIE0_ERR     10
-#define IRQ_ORION_PCIE0_INT     11
-#define IRQ_ORION_USB1_CTRL     12
-#define IRQ_ORION_DEV_BUS_ERR   14
-#define IRQ_ORION_PCI_ERR       15
-#define IRQ_ORION_USB_BR_ERR    16
-#define IRQ_ORION_USB0_CTRL     17
-#define IRQ_ORION_ETH_RX        18
-#define IRQ_ORION_ETH_TX        19
-#define IRQ_ORION_ETH_MISC      20
-#define IRQ_ORION_ETH_SUM       21
-#define IRQ_ORION_ETH_ERR       22
-#define IRQ_ORION_IDMA_ERR      23
-#define IRQ_ORION_IDMA_0        24
-#define IRQ_ORION_IDMA_1        25
-#define IRQ_ORION_IDMA_2        26
-#define IRQ_ORION_IDMA_3        27
-#define IRQ_ORION_CESA          28
-#define IRQ_ORION_SATA          29
-#define IRQ_ORION_XOR0          30
-#define IRQ_ORION_XOR1          31
-
-/*
- * Orion General Purpose Pins
- */
-#define IRQ_ORION_GPIO_START    32
-#define NR_GPIO_IRQS            GPIO_MAX
-
-#define NR_IRQS                 (IRQ_ORION_GPIO_START + NR_GPIO_IRQS)
-
-#endif /* __ASM_ARCH_IRQS_H__ */
diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h
deleted file mode 100644
index 673a418a7419..000000000000
--- a/include/asm-arm/arch-orion/orion.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * include/asm-arm/arch-orion/orion.h
- *
- * Generic definitions of Orion SoC flavors:
- *  Orion-1, Orion-NAS, Orion-VoIP, and Orion-2.
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_ORION_H__
-#define __ASM_ARCH_ORION_H__
-
-/*****************************************************************************
- * Orion Address Map
- *
- * virt         phys            size
- * fdd00000     f1000000        1M      on-chip peripheral registers
- * fde00000     f2000000        1M      PCIe I/O space
- * fdf00000     f2100000        1M      PCI I/O space
- * fe000000     f0000000        16M     PCIe WA space (Orion-NAS only)
- ****************************************************************************/
-#define ORION_REGS_PHYS_BASE    0xf1000000
-#define ORION_REGS_VIRT_BASE    0xfdd00000
-#define ORION_REGS_SIZE         SZ_1M
-
-#define ORION_PCIE_IO_PHYS_BASE 0xf2000000
-#define ORION_PCIE_IO_VIRT_BASE 0xfde00000
-#define ORION_PCIE_IO_BUS_BASE  0x00000000
-#define ORION_PCIE_IO_SIZE      SZ_1M
-
-#define ORION_PCI_IO_PHYS_BASE  0xf2100000
-#define ORION_PCI_IO_VIRT_BASE  0xfdf00000
-#define ORION_PCI_IO_BUS_BASE   0x00100000
-#define ORION_PCI_IO_SIZE       SZ_1M
-
-/* Relevant only for Orion-NAS */
-#define ORION_PCIE_WA_PHYS_BASE 0xf0000000
-#define ORION_PCIE_WA_VIRT_BASE 0xfe000000
-#define ORION_PCIE_WA_SIZE      SZ_16M
-
-#define ORION_PCIE_MEM_PHYS_BASE        0xe0000000
-#define ORION_PCIE_MEM_SIZE             SZ_128M
-
-#define ORION_PCI_MEM_PHYS_BASE         0xe8000000
-#define ORION_PCI_MEM_SIZE              SZ_128M
-
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) */
-#define MV88F5181_DEV_ID        0x5181
-#define MV88F5181_REV_B1        3
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID        0x5182
-#define MV88F5182_REV_A2        2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID        0x5281
-#define MV88F5281_REV_D1        5
-#define MV88F5281_REV_D2        6
-
-/*******************************************************************************
- * Orion Registers Map
- ******************************************************************************/
-#define ORION_DDR_VIRT_BASE             (ORION_REGS_VIRT_BASE | 0x00000)
-#define ORION_DDR_REG(x)                (ORION_DDR_VIRT_BASE | (x))
-
-#define ORION_DEV_BUS_PHYS_BASE         (ORION_REGS_PHYS_BASE | 0x10000)
-#define ORION_DEV_BUS_VIRT_BASE         (ORION_REGS_VIRT_BASE | 0x10000)
-#define ORION_DEV_BUS_REG(x)            (ORION_DEV_BUS_VIRT_BASE | (x))
-#define  I2C_PHYS_BASE                  (ORION_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE                (ORION_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE                (ORION_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE                (ORION_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE                (ORION_DEV_BUS_VIRT_BASE | 0x2100)
-
-#define ORION_BRIDGE_VIRT_BASE          (ORION_REGS_VIRT_BASE | 0x20000)
-#define ORION_BRIDGE_REG(x)             (ORION_BRIDGE_VIRT_BASE | (x))
-
-#define ORION_PCI_VIRT_BASE             (ORION_REGS_VIRT_BASE | 0x30000)
-#define ORION_PCI_REG(x)                (ORION_PCI_VIRT_BASE | (x))
-
-#define ORION_PCIE_VIRT_BASE            (ORION_REGS_VIRT_BASE | 0x40000)
-#define ORION_PCIE_REG(x)               (ORION_PCIE_VIRT_BASE | (x))
-
-#define ORION_USB0_PHYS_BASE            (ORION_REGS_PHYS_BASE | 0x50000)
-#define ORION_USB0_VIRT_BASE            (ORION_REGS_VIRT_BASE | 0x50000)
-#define ORION_USB0_REG(x)               (ORION_USB0_VIRT_BASE | (x))
-
-#define ORION_ETH_PHYS_BASE             (ORION_REGS_PHYS_BASE | 0x70000)
-#define ORION_ETH_VIRT_BASE             (ORION_REGS_VIRT_BASE | 0x70000)
-#define ORION_ETH_REG(x)                (ORION_ETH_VIRT_BASE | (x))
-
-#define ORION_SATA_PHYS_BASE            (ORION_REGS_PHYS_BASE | 0x80000)
-#define ORION_SATA_VIRT_BASE            (ORION_REGS_VIRT_BASE | 0x80000)
-#define ORION_SATA_REG(x)               (ORION_SATA_VIRT_BASE | (x))
-
-#define ORION_USB1_PHYS_BASE            (ORION_REGS_PHYS_BASE | 0xa0000)
-#define ORION_USB1_VIRT_BASE            (ORION_REGS_VIRT_BASE | 0xa0000)
-#define ORION_USB1_REG(x)               (ORION_USB1_VIRT_BASE | (x))
-
-/*******************************************************************************
- * Device Bus Registers
- ******************************************************************************/
-#define MPP_0_7_CTRL            ORION_DEV_BUS_REG(0x000)
-#define MPP_8_15_CTRL           ORION_DEV_BUS_REG(0x004)
-#define MPP_16_19_CTRL          ORION_DEV_BUS_REG(0x050)
-#define MPP_DEV_CTRL            ORION_DEV_BUS_REG(0x008)
-#define MPP_RESET_SAMPLE        ORION_DEV_BUS_REG(0x010)
-#define GPIO_OUT                ORION_DEV_BUS_REG(0x100)
-#define GPIO_IO_CONF            ORION_DEV_BUS_REG(0x104)
-#define GPIO_BLINK_EN           ORION_DEV_BUS_REG(0x108)
-#define GPIO_IN_POL             ORION_DEV_BUS_REG(0x10c)
-#define GPIO_DATA_IN            ORION_DEV_BUS_REG(0x110)
-#define GPIO_EDGE_CAUSE         ORION_DEV_BUS_REG(0x114)
-#define GPIO_EDGE_MASK          ORION_DEV_BUS_REG(0x118)
-#define GPIO_LEVEL_MASK         ORION_DEV_BUS_REG(0x11c)
-#define DEV_BANK_0_PARAM        ORION_DEV_BUS_REG(0x45c)
-#define DEV_BANK_1_PARAM        ORION_DEV_BUS_REG(0x460)
-#define DEV_BANK_2_PARAM        ORION_DEV_BUS_REG(0x464)
-#define DEV_BANK_BOOT_PARAM     ORION_DEV_BUS_REG(0x46c)
-#define DEV_BUS_CTRL            ORION_DEV_BUS_REG(0x4c0)
-#define DEV_BUS_INT_CAUSE       ORION_DEV_BUS_REG(0x4d0)
-#define DEV_BUS_INT_MASK        ORION_DEV_BUS_REG(0x4d4)
-#define GPIO_MAX                32
-
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF                ORION_BRIDGE_REG(0x100)
-#define CPU_CTRL                ORION_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK          ORION_BRIDGE_REG(0x108)
-#define CPU_SOFT_RESET          ORION_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG      ORION_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE            ORION_BRIDGE_REG(0x110)
-#define BRIDGE_MASK             ORION_BRIDGE_REG(0x114)
-#define MAIN_IRQ_CAUSE          ORION_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK           ORION_BRIDGE_REG(0x204)
-#define TIMER_CTRL              ORION_BRIDGE_REG(0x300)
-#define TIMER_VAL(x)            ORION_BRIDGE_REG(0x314 + ((x) * 8))
-#define TIMER_VAL_RELOAD(x)     ORION_BRIDGE_REG(0x310 + ((x) * 8))
-
-#ifndef __ASSEMBLY__
-
-/*******************************************************************************
- * Helpers to access Orion registers
- ******************************************************************************/
-#include <asm/types.h>
-#include <asm/io.h>
-
-#define orion_read(r)           __raw_readl(r)
-#define orion_write(r, val)     __raw_writel(val, r)
-
-/*
- * These are not preempt safe. Locks, if needed, must be taken care by caller.
- */
-#define orion_setbits(r, mask)  orion_write((r), orion_read(r) | (mask))
-#define orion_clrbits(r, mask)  orion_write((r), orion_read(r) & ~(mask))
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_ORION_H__ */
diff --git a/include/asm-arm/arch-orion/timex.h b/include/asm-arm/arch-orion/timex.h
deleted file mode 100644
index 26c2c91eecf0..000000000000
--- a/include/asm-arm/arch-orion/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * include/asm-arm/arch-orion/timex.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define ORION_TCLK              166666667
-#define CLOCK_TICK_RATE         ORION_TCLK
diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S
index 2746220f5d85..4f98f3ba2929 100644
--- a/include/asm-arm/arch-orion/debug-macro.S
+++ b/include/asm-arm/arch-orion5x/debug-macro.S
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-orion/debug-macro.S
+ * include/asm-arm/arch-orion5x/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -8,13 +8,13 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 
         .macro  addruart,rx
         mrc     p15, 0, \rx, c1, c0
         tst     \rx, #1                                 @ MMU enabled?
-        ldreq   \rx, =ORION_REGS_PHYS_BASE
-        ldrne   \rx, =ORION_REGS_VIRT_BASE
+        ldreq   \rx, =ORION5X_REGS_PHYS_BASE
+        ldrne   \rx, =ORION5X_REGS_VIRT_BASE
         orr     \rx, \rx, #0x00012000
         .endm
 
diff --git a/include/asm-arm/arch-orion/dma.h b/include/asm-arm/arch-orion5x/dma.h
index 40a8c178f10d..40a8c178f10d 100644
--- a/include/asm-arm/arch-orion/dma.h
+++ b/include/asm-arm/arch-orion5x/dma.h
diff --git a/include/asm-arm/arch-orion/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S
index cda096b2acfd..d8ef54c0ee9a 100644
--- a/include/asm-arm/arch-orion/entry-macro.S
+++ b/include/asm-arm/arch-orion5x/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion/entry-macro.S
+ * include/asm-arm/arch-orion5x/entry-macro.S
  *
  * Low-level IRQ helper macros for Orion platforms
  *
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 
         .macro  disable_fiq
         .endm
diff --git a/include/asm-arm/arch-orion/gpio.h b/include/asm-arm/arch-orion5x/gpio.h
index d66284f9a14c..c85e498388b6 100644
--- a/include/asm-arm/arch-orion/gpio.h
+++ b/include/asm-arm/arch-orion5x/gpio.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion/gpio.h
+ * include/asm-arm/arch-orion5x/gpio.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -12,17 +12,17 @@ extern int gpio_direction_input(unsigned pin);
 extern int gpio_direction_output(unsigned pin, int value);
 extern int gpio_get_value(unsigned pin);
 extern void gpio_set_value(unsigned pin, int value);
-extern void orion_gpio_set_blink(unsigned pin, int blink);
+extern void orion5x_gpio_set_blink(unsigned pin, int blink);
 extern void gpio_display(void);         /* debug */
 
 static inline int gpio_to_irq(int pin)
 {
-        return pin + IRQ_ORION_GPIO_START;
+        return pin + IRQ_ORION5X_GPIO_START;
 }
 
 static inline int irq_to_gpio(int irq)
 {
-        return irq - IRQ_ORION_GPIO_START;
+        return irq - IRQ_ORION5X_GPIO_START;
 }
 
 #include <asm-generic/gpio.h>           /* cansleep wrappers */
diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion5x/hardware.h
index 65da374de735..5d2d8e0b5630 100644
--- a/include/asm-arm/arch-orion/hardware.h
+++ b/include/asm-arm/arch-orion5x/hardware.h
@@ -1,21 +1,21 @@
 /*
- * include/asm-arm/arch-orion/hardware.h
+ * include/asm-arm/arch-orion5x/hardware.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
 
-#include "orion.h"
+#include "orion5x.h"
 
 #define pcibios_assign_all_busses()     1
 
 #define PCIBIOS_MIN_IO          0x00001000
 #define PCIBIOS_MIN_MEM         0x01000000
-#define PCIMEM_BASE             ORION_PCIE_MEM_PHYS_BASE
+#define PCIMEM_BASE             ORION5X_PCIE_MEM_PHYS_BASE
 
 
 #endif
diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h
new file mode 100644
index 000000000000..5148ab7ad1f8
--- /dev/null
+++ b/include/asm-arm/arch-orion5x/io.h
@@ -0,0 +1,68 @@
+/*
+ * include/asm-arm/arch-orion5x/io.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "orion5x.h"
+
+#define IO_SPACE_LIMIT          0xffffffff
+#define IO_SPACE_REMAP          ORION5X_PCI_SYS_IO_BASE
+
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+        void __iomem *retval;
+
+        if (mtype == MT_DEVICE && size && paddr >= ORION5X_REGS_PHYS_BASE &&
+            paddr + size <= ORION5X_REGS_PHYS_BASE + ORION5X_REGS_SIZE) {
+                retval = (void __iomem *)ORION5X_REGS_VIRT_BASE +
+                                (paddr - ORION5X_REGS_PHYS_BASE);
+        } else {
+                retval = __arm_ioremap(paddr, size, mtype);
+        }
+
+        return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+        if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
+            addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
+                __iounmap(addr);
+}
+
+static inline void __iomem *__io(unsigned long addr)
+{
+        return (void __iomem *)addr;
+}
+
+#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
+#define __arch_iounmap(a)       __arch_iounmap(a)
+#define __io(a)                 __io(a)
+#define __mem_pci(a)            (a)
+
+
+/*****************************************************************************
+ * Helpers to access Orion registers
+ ****************************************************************************/
+#define orion5x_read(r)         __raw_readl(r)
+#define orion5x_write(r, val)   __raw_writel(val, r)
+
+/*
+ * These are not preempt-safe.  Locks, if needed, must be taken
+ * care of by the caller.
+ */
+#define orion5x_setbits(r, mask)        orion5x_write((r), orion5x_read(r) | (mask))
+#define orion5x_clrbits(r, mask)        orion5x_write((r), orion5x_read(r) & ~(mask))
+
+
+#endif
diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h
new file mode 100644
index 000000000000..abdd61a4833a
--- /dev/null
+++ b/include/asm-arm/arch-orion5x/irqs.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-arm/arch-orion5x/irqs.h
+ *
+ * IRQ definitions for Orion SoC
+ *
+ *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ *  This file is licensed under the terms of the GNU General Public
+ *  License version 2. This program is licensed "as is" without any
+ *  warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "orion5x.h"    /* need GPIO_MAX */
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION5X_BRIDGE              0
+#define IRQ_ORION5X_DOORBELL_H2C        1
+#define IRQ_ORION5X_DOORBELL_C2H        2
+#define IRQ_ORION5X_UART0               3
+#define IRQ_ORION5X_UART1               4
+#define IRQ_ORION5X_I2C                 5
+#define IRQ_ORION5X_GPIO_0_7            6
+#define IRQ_ORION5X_GPIO_8_15           7
+#define IRQ_ORION5X_GPIO_16_23          8
+#define IRQ_ORION5X_GPIO_24_31          9
+#define IRQ_ORION5X_PCIE0_ERR           10
+#define IRQ_ORION5X_PCIE0_INT           11
+#define IRQ_ORION5X_USB1_CTRL           12
+#define IRQ_ORION5X_DEV_BUS_ERR         14
+#define IRQ_ORION5X_PCI_ERR             15
+#define IRQ_ORION5X_USB_BR_ERR          16
+#define IRQ_ORION5X_USB0_CTRL           17
+#define IRQ_ORION5X_ETH_RX              18
+#define IRQ_ORION5X_ETH_TX              19
+#define IRQ_ORION5X_ETH_MISC            20
+#define IRQ_ORION5X_ETH_SUM             21
+#define IRQ_ORION5X_ETH_ERR             22
+#define IRQ_ORION5X_IDMA_ERR            23
+#define IRQ_ORION5X_IDMA_0              24
+#define IRQ_ORION5X_IDMA_1              25
+#define IRQ_ORION5X_IDMA_2              26
+#define IRQ_ORION5X_IDMA_3              27
+#define IRQ_ORION5X_CESA                28
+#define IRQ_ORION5X_SATA                29
+#define IRQ_ORION5X_XOR0                30
+#define IRQ_ORION5X_XOR1                31
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION5X_GPIO_START  32
+#define NR_GPIO_IRQS            GPIO_MAX
+
+#define NR_IRQS                 (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-orion/memory.h b/include/asm-arm/arch-orion5x/memory.h
index d954dba87ced..80053a7afc7a 100644
--- a/include/asm-arm/arch-orion/memory.h
+++ b/include/asm-arm/arch-orion5x/memory.h
@@ -1,15 +1,16 @@
 /*
- * include/asm-arm/arch-orion/memory.h
+ * include/asm-arm/arch-orion5x/memory.h
  *
  * Marvell Orion memory definitions
  */
 
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
 
 #define PHYS_OFFSET     UL(0x00000000)
 
 #define __virt_to_bus(x)        __virt_to_phys(x)
 #define __bus_to_virt(x)        __phys_to_virt(x)
 
+
 #endif
diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h
new file mode 100644
index 000000000000..206ddd71e193
--- /dev/null
+++ b/include/asm-arm/arch-orion5x/orion5x.h
@@ -0,0 +1,159 @@
+/*
+ * include/asm-arm/arch-orion5x/orion5x.h
+ *
+ * Generic definitions of Orion SoC flavors:
+ *  Orion-1, Orion-NAS, Orion-VoIP, and Orion-2.
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_ORION5X_H
+#define __ASM_ARCH_ORION5X_H
+
+/*****************************************************************************
+ * Orion Address Maps
+ *
+ * phys
+ * e0000000     PCIe MEM space
+ * e8000000     PCI MEM space
+ * f0000000     PCIe WA space (Orion-1/Orion-NAS only)
+ * f1000000     on-chip peripheral registers
+ * f2000000     PCIe I/O space
+ * f2100000     PCI I/O space
+ * f4000000     device bus mappings (boot)
+ * fa000000     device bus mappings (cs0)
+ * fa800000     device bus mappings (cs2)
+ * fc000000     device bus mappings (cs0/cs1)
+ *
+ * virt         phys            size
+ * fdd00000     f1000000        1M      on-chip peripheral registers
+ * fde00000     f2000000        1M      PCIe I/O space
+ * fdf00000     f2100000        1M      PCI I/O space
+ * fe000000     f0000000        16M     PCIe WA space (Orion-1/Orion-NAS only)
+ ****************************************************************************/
+#define ORION5X_REGS_PHYS_BASE          0xf1000000
+#define ORION5X_REGS_VIRT_BASE          0xfdd00000
+#define ORION5X_REGS_SIZE               SZ_1M
+
+#define ORION5X_PCIE_IO_PHYS_BASE       0xf2000000
+#define ORION5X_PCIE_IO_VIRT_BASE       0xfde00000
+#define ORION5X_PCIE_IO_BUS_BASE        0x00000000
+#define ORION5X_PCIE_IO_SIZE            SZ_1M
+
+#define ORION5X_PCI_IO_PHYS_BASE        0xf2100000
+#define ORION5X_PCI_IO_VIRT_BASE        0xfdf00000
+#define ORION5X_PCI_IO_BUS_BASE         0x00100000
+#define ORION5X_PCI_IO_SIZE             SZ_1M
+
+/* Relevant only for Orion-1/Orion-NAS */
+#define ORION5X_PCIE_WA_PHYS_BASE       0xf0000000
+#define ORION5X_PCIE_WA_VIRT_BASE       0xfe000000
+#define ORION5X_PCIE_WA_SIZE            SZ_16M
+
+#define ORION5X_PCIE_MEM_PHYS_BASE      0xe0000000
+#define ORION5X_PCIE_MEM_SIZE           SZ_128M
+
+#define ORION5X_PCI_MEM_PHYS_BASE       0xe8000000
+#define ORION5X_PCI_MEM_SIZE            SZ_128M
+
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) */
+#define MV88F5181_DEV_ID        0x5181
+#define MV88F5181_REV_B1        3
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID        0x5182
+#define MV88F5182_REV_A2        2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID        0x5281
+#define MV88F5281_REV_D1        5
+#define MV88F5281_REV_D2        6
+
+/*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+#define ORION5X_DDR_VIRT_BASE           (ORION5X_REGS_VIRT_BASE | 0x00000)
+#define ORION5X_DDR_REG(x)              (ORION5X_DDR_VIRT_BASE | (x))
+
+#define ORION5X_DEV_BUS_PHYS_BASE       (ORION5X_REGS_PHYS_BASE | 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE       (ORION5X_REGS_VIRT_BASE | 0x10000)
+#define ORION5X_DEV_BUS_REG(x)          (ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  I2C_PHYS_BASE                  (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
+#define  UART0_PHYS_BASE                (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE                (ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE                (ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE                (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+
+#define ORION5X_BRIDGE_VIRT_BASE        (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_REG(x)           (ORION5X_BRIDGE_VIRT_BASE | (x))
+#define  TIMER_VIRT_BASE                (ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#define ORION5X_PCI_VIRT_BASE           (ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_REG(x)              (ORION5X_PCI_VIRT_BASE | (x))
+
+#define ORION5X_PCIE_VIRT_BASE          (ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_REG(x)             (ORION5X_PCIE_VIRT_BASE | (x))
+
+#define ORION5X_USB0_PHYS_BASE          (ORION5X_REGS_PHYS_BASE | 0x50000)
+#define ORION5X_USB0_VIRT_BASE          (ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_REG(x)             (ORION5X_USB0_VIRT_BASE | (x))
+
+#define ORION5X_ETH_PHYS_BASE           (ORION5X_REGS_PHYS_BASE | 0x70000)
+#define ORION5X_ETH_VIRT_BASE           (ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_REG(x)              (ORION5X_ETH_VIRT_BASE | (x))
+
+#define ORION5X_SATA_PHYS_BASE          (ORION5X_REGS_PHYS_BASE | 0x80000)
+#define ORION5X_SATA_VIRT_BASE          (ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_REG(x)             (ORION5X_SATA_VIRT_BASE | (x))
+
+#define ORION5X_USB1_PHYS_BASE          (ORION5X_REGS_PHYS_BASE | 0xa0000)
+#define ORION5X_USB1_VIRT_BASE          (ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_REG(x)             (ORION5X_USB1_VIRT_BASE | (x))
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL            ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL           ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL          ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL            ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE        ORION5X_DEV_BUS_REG(0x010)
+#define GPIO_OUT                ORION5X_DEV_BUS_REG(0x100)
+#define GPIO_IO_CONF            ORION5X_DEV_BUS_REG(0x104)
+#define GPIO_BLINK_EN           ORION5X_DEV_BUS_REG(0x108)
+#define GPIO_IN_POL             ORION5X_DEV_BUS_REG(0x10c)
+#define GPIO_DATA_IN            ORION5X_DEV_BUS_REG(0x110)
+#define GPIO_EDGE_CAUSE         ORION5X_DEV_BUS_REG(0x114)
+#define GPIO_EDGE_MASK          ORION5X_DEV_BUS_REG(0x118)
+#define GPIO_LEVEL_MASK         ORION5X_DEV_BUS_REG(0x11c)
+#define DEV_BANK_0_PARAM        ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM        ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM        ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM     ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL            ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE       ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK        ORION5X_DEV_BUS_REG(0x4d4)
+#define GPIO_MAX                32
+
+/***************************************************************************
+ * Orion CPU Bridge Registers
+ **************************************************************************/
+#define CPU_CONF                ORION5X_BRIDGE_REG(0x100)
+#define CPU_CTRL                ORION5X_BRIDGE_REG(0x104)
+#define CPU_RESET_MASK          ORION5X_BRIDGE_REG(0x108)
+#define CPU_SOFT_RESET          ORION5X_BRIDGE_REG(0x10c)
+#define POWER_MNG_CTRL_REG      ORION5X_BRIDGE_REG(0x11C)
+#define BRIDGE_CAUSE            ORION5X_BRIDGE_REG(0x110)
+#define BRIDGE_MASK             ORION5X_BRIDGE_REG(0x114)
+#define  BRIDGE_INT_TIMER0      0x0002
+#define  BRIDGE_INT_TIMER1      0x0004
+#define MAIN_IRQ_CAUSE          ORION5X_BRIDGE_REG(0x200)
+#define MAIN_IRQ_MASK           ORION5X_BRIDGE_REG(0x204)
+
+
+#endif
diff --git a/include/asm-arm/arch-orion/system.h b/include/asm-arm/arch-orion5x/system.h
index 17704c68f90e..3f1d1e2d38f8 100644
--- a/include/asm-arm/arch-orion/system.h
+++ b/include/asm-arm/arch-orion5x/system.h
@@ -1,10 +1,10 @@
 /*
- * include/asm-arm/arch-orion/system.h
+ * include/asm-arm/arch-orion5x/system.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
@@ -12,7 +12,7 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/arch/hardware.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 
 static inline void arch_idle(void)
 {
@@ -24,8 +24,9 @@ static inline void arch_reset(char mode)
         /*
          * Enable and issue soft reset
          */
-        orion_setbits(CPU_RESET_MASK, (1 << 2));
-        orion_setbits(CPU_SOFT_RESET, 1);
+        orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+        orion5x_setbits(CPU_SOFT_RESET, 1);
 }
 
+
 #endif
diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h
new file mode 100644
index 000000000000..31c568e28cc3
--- /dev/null
+++ b/include/asm-arm/arch-orion5x/timex.h
@@ -0,0 +1,13 @@
+/*
+ * include/asm-arm/arch-orion5x/timex.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE         (100 * HZ)
+
+#define ORION5X_TCLK            166666667
diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h
index 59f44039909a..5c13d4fafb4e 100644
--- a/include/asm-arm/arch-orion/uncompress.h
+++ b/include/asm-arm/arch-orion5x/uncompress.h
@@ -1,14 +1,14 @@
 /*
- * include/asm-arm/arch-orion/uncompress.h
+ * include/asm-arm/arch-orion5x/uncompress.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 
 #define MV_UART_THR     ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
 #define MV_UART_LSR     ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
diff --git a/include/asm-arm/arch-orion/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h
index 9d580278d2bc..2b3061e90dc1 100644
--- a/include/asm-arm/arch-orion/vmalloc.h
+++ b/include/asm-arm/arch-orion5x/vmalloc.h
@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-orion/vmalloc.h
+ * include/asm-arm/arch-orion5x/vmalloc.h
  */
 
 #define VMALLOC_END       0xfd800000
diff --git a/include/asm-arm/arch-pxa/camera.h b/include/asm-arm/arch-pxa/camera.h
new file mode 100644
index 000000000000..39516ced8b1f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/camera.h
@@ -0,0 +1,48 @@
+/*
+    camera.h - PXA camera driver header file
+
+    Copyright (C) 2003, Intel Corporation
+    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER       1
+#define PXA_CAMERA_DATAWIDTH_4  2
+#define PXA_CAMERA_DATAWIDTH_5  4
+#define PXA_CAMERA_DATAWIDTH_8  8
+#define PXA_CAMERA_DATAWIDTH_9  0x10
+#define PXA_CAMERA_DATAWIDTH_10 0x20
+#define PXA_CAMERA_PCLK_EN      0x40
+#define PXA_CAMERA_MCLK_EN      0x80
+#define PXA_CAMERA_PCP          0x100
+#define PXA_CAMERA_HSP          0x200
+#define PXA_CAMERA_VSP          0x400
+
+struct pxacamera_platform_data {
+        int (*init)(struct device *);
+        int (*power)(struct device *, int);
+        int (*reset)(struct device *, int);
+
+        unsigned long flags;
+        unsigned long mclk_10khz;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h
new file mode 100644
index 000000000000..6fa85c4f94f8
--- /dev/null
+++ b/include/asm-arm/arch-pxa/gumstix.h
@@ -0,0 +1,96 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET          7
+#define GPIO_GUMSTIX_BTRESET_MD         (GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the original gumstix,
+this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#ifdef CONFIG_ARCH_GUMSTIX_ORIG
+
+#define GPIO_GUMSTIX_USB_GPIOn          81
+#define GPIO_GUMSTIX_USB_GPIOx          83
+
+#else
+
+#define GPIO_GUMSTIX_USB_GPIOn          35
+#define GPIO_GUMSTIX_USB_GPIOx          41
+
+#endif
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ            IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD       (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD   (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD   (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP             22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT         11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST           80
+#define GPIO_GUMSTIX_ETH0_RST_MD        (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST           52
+#define GPIO_GUMSTIX_ETH1_RST_MD        (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0               36
+#define GPIO_GUMSTIX_ETH0_MD            (GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ                IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1               27
+#define GPIO_GUMSTIX_ETH1_MD            (GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ                IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET                     8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1                     4
+#define GPIO4_nSTSCHG                   GPIO4_nBVD1
+#define GPIO11_nCD                      11
+#define GPIO26_PRDY_nBSY                26
+#define GUMSTIX_S0_nSTSCHG_IRQ          IRQ_GPIO(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ              IRQ_GPIO(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ        IRQ_GPIO(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1                    18
+#define GPIO18_nSTSCHG                  GPIO18_nBVD1
+#define GPIO36_nCD                      36
+#define GPIO27_PRDY_nBSY                27
+#define GUMSTIX_S1_nSTSCHG_IRQ          IRQ_GPIO(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ              IRQ_GPIO(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ        IRQ_GPIO(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD                (GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD                  (GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD                   (GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD               (GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD             (GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD             (GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD                   (GPIO36_nCD | GPIO_IN)
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
index 748406f384c2..99f4f423a8e1 100644
--- a/include/asm-arm/arch-pxa/irda.h
+++ b/include/asm-arm/arch-pxa/irda.h
@@ -10,6 +10,8 @@
 struct pxaficp_platform_data {
         int transceiver_cap;
         void (*transceiver_mode)(struct device *dev, int mode);
+        int (*startup)(struct device *dev);
+        void (*shutdown)(struct device *dev);
 };
 
 extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index c562b972a4a6..50c77eacbd5e 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -181,7 +181,8 @@
 #elif defined(CONFIG_ARCH_LUBBOCK) || \
       defined(CONFIG_MACH_LOGICPD_PXA270) || \
       defined(CONFIG_MACH_MAINSTONE) || \
-      defined(CONFIG_MACH_PCM027)
+      defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_MACH_MAGICIAN)
 #define NR_IRQS                 (IRQ_BOARD_END)
 #else
 #define NR_IRQS                 (IRQ_BOARD_START)
diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h
index 337f51f06b3a..b34fd5683e2d 100644
--- a/include/asm-arm/arch-pxa/magician.h
+++ b/include/asm-arm/arch-pxa/magician.h
@@ -12,7 +12,8 @@
 #ifndef _MAGICIAN_H_
 #define _MAGICIAN_H_
 
-#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 /*
  * PXA GPIOs
@@ -34,6 +35,7 @@
 #define GPIO48_MAGICIAN_UNKNOWN                 48
 #define GPIO56_MAGICIAN_UNKNOWN                 56
 #define GPIO57_MAGICIAN_CAM_RESET               57
+#define GPIO75_MAGICIAN_SAMSUNG_POWER           75
 #define GPIO83_MAGICIAN_nIR_EN                  83
 #define GPIO86_MAGICIAN_GSM_RESET               86
 #define GPIO87_MAGICIAN_GSM_SELECT              87
@@ -81,6 +83,7 @@
 #define GPIO48_MAGICIAN_UNKNOWN_MD              (48 | GPIO_OUT)
 #define GPIO56_MAGICIAN_UNKNOWN_MD              (56 | GPIO_OUT)
 #define GPIO57_MAGICIAN_CAM_RESET_MD            (57 | GPIO_OUT)
+#define GPIO75_MAGICIAN_SAMSUNG_POWER_MD        (75 | GPIO_OUT)
 #define GPIO83_MAGICIAN_nIR_EN_MD               (83 | GPIO_OUT)
 #define GPIO86_MAGICIAN_GSM_RESET_MD            (86 | GPIO_OUT)
 #define GPIO87_MAGICIAN_GSM_SELECT_MD           (87 | GPIO_OUT)
@@ -108,4 +111,56 @@
 #define GPIO119_MAGICIAN_UNKNOWN_MD             (119 | GPIO_OUT)
 #define GPIO120_MAGICIAN_UNKNOWN_MD             (120 | GPIO_OUT)
 
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD         (IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP         (IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT         (IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_AC         (IRQ_BOARD_START + 3)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE                     0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO(reg,bit) \
+        (MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER            MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER                MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET                MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER                MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER                MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER                 MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0                  MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1                  MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER                MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET              MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER              MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER                 MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER                 MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC               MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL      MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP                MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2                MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_CHARGE_EN                MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_GSM_POWER                MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+#define EGPIO_MAGICIAN_CABLE_STATE_AC           MAGICIAN_EGPIO(4, 0)
+#define EGPIO_MAGICIAN_CABLE_STATE_USB          MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0                MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1                MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2                MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT               MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY             MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT                MAGICIAN_EGPIO(6, 1)
+
 #endif /* _MAGICIAN_H_ */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h
new file mode 100644
index 000000000000..0499323010ba
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mfp-pxa25x.h
@@ -0,0 +1,161 @@
+#ifndef __ASM_ARCH_MFP_PXA25X_H
+#define __ASM_ARCH_MFP_PXA25X_H
+
+#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO2_GPIO              MFP_CFG_IN(GPIO2, AF0)
+#define GPIO3_GPIO              MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO              MFP_CFG_IN(GPIO4, AF0)
+#define GPIO5_GPIO              MFP_CFG_IN(GPIO5, AF0)
+#define GPIO6_GPIO              MFP_CFG_IN(GPIO6, AF0)
+#define GPIO7_GPIO              MFP_CFG_IN(GPIO7, AF0)
+#define GPIO8_GPIO              MFP_CFG_IN(GPIO8, AF0)
+
+#define GPIO1_RST               MFP_CFG_IN(GPIO1, AF1)
+
+/* Crystal and Clock Signals */
+#define GPIO10_RTCCLK           MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO70_RTC_CLK          MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO7_48MHz             MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
+#define GPIO11_3_6MHz           MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO71_3_6MHz           MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
+#define GPIO12_32KHz            MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+#define GPIO72_32kHz            MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO15_nCS_1            MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2            MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3            MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4            MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5            MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO18_RDY              MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0           MFP_CFG_IN(GPIO20, AF1)
+#define GPIO19_DREQ_1           MFP_CFG_IN(GPIO19, AF1)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO13_MBGNT            MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
+#define GPIO73_MBGNT            MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
+#define GPIO14_MBREQ            MFP_CFG_IN(GPIO14, AF1)
+#define GPIO66_MBREQ            MFP_CFG_IN(GPIO66, AF1)
+
+/* PC CARD */
+#define GPIO52_nPCE_1           MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
+#define GPIO53_nPCE_2           MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
+#define GPIO55_nPREG            MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR            MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW            MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE             MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE             MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16          MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT           MFP_CFG_IN(GPIO56, AF1)
+#define GPIO54_nPSKTSEL         MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+
+/* FFUART */
+#define GPIO34_FFUART_RXD       MFP_CFG_IN(GPIO34, AF1)
+#define GPIO35_FFUART_CTS       MFP_CFG_IN(GPIO35, AF1)
+#define GPIO36_FFUART_DCD       MFP_CFG_IN(GPIO36, AF1)
+#define GPIO37_FFUART_DSR       MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI        MFP_CFG_IN(GPIO38, AF1)
+#define GPIO39_FFUART_TXD       MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR       MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS       MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO42_BTUART_RXD       MFP_CFG_IN(GPIO42, AF1)
+#define GPIO43_BTUART_TXD       MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO44_BTUART_CTS       MFP_CFG_IN(GPIO44, AF1)
+#define GPIO45_BTUART_RTS       MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD       MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD       MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* HWUART */
+#define GPIO42_HWUART_RXD       MFP_CFG_IN(GPIO42, AF3)
+#define GPIO43_HWUART_TXD       MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
+#define GPIO44_HWUART_CTS       MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_HWUART_RTS       MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
+#define GPIO48_HWUART_TXD       MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
+#define GPIO49_HWUART_RXD       MFP_CFG_IN(GPIO49, AF1)
+#define GPIO50_HWUART_CTS       MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_HWUART_RTS       MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO46_FICP_RXD         MFP_CFG_IN(GPIO46, AF1)
+#define GPIO47_FICP_TXD         MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1 */
+#define GPIO16_PWM0_OUT         MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT         MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO28_AC97_BITCLK      MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0  MFP_CFG_IN(GPIO29, AF1)
+#define GPIO30_AC97_SDATA_OUT   MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO31_AC97_SYNC        MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO32_AC97_SDATA_IN_1  MFP_CFG_IN(GPIO32, AF1)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN    MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT   MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN     MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT    MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC         MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO32_I2S_SYSCLK       MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK        MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM        MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
+#define GPIO25_SSP1_TXD         MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO26_SSP1_RXD         MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_EXTCLK      MFP_CFG_IN(GPIO27, AF1)
+
+/* SSP 2 - NSSP */
+#define GPIO81_SSP2_CLK_OUT     MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO81_SSP2_CLK_IN      MFP_CFG_IN(GPIO81, AF1)
+#define GPIO82_SSP2_FRM_OUT     MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
+#define GPIO82_SSP2_FRM_IN      MFP_CFG_IN(GPIO82, AF1)
+#define GPIO83_SSP2_TXD         MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
+#define GPIO83_SSP2_RXD         MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_SSP2_TXD         MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
+#define GPIO84_SSP2_RXD         MFP_CFG_IN(GPIO84, AF2)
+
+/* MMC */
+#define GPIO6_MMC_CLK           MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
+#define GPIO8_MMC_CS0           MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
+#define GPIO9_MMC_CS1           MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO34_MMC_CS0          MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
+#define GPIO39_MMC_CS1          MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO53_MMC_CLK          MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_MMC_CLK          MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
+#define GPIO69_MMC_CLK          MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
+#define GPIO67_MMC_CS0          MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
+#define GPIO68_MMC_CS1          MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0        MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1        MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2        MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3        MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4        MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5        MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6        MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7        MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8        MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9        MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10       MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11       MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12       MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13       MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14       MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15       MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK         MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK         MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK         MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_ACBIAS       MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+
+#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h
new file mode 100644
index 000000000000..eb6eaa174f8d
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h
@@ -0,0 +1,432 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE:  for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO85_GPIO             MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO             MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO             MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO             MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO             MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO             MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO             MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO             MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO             MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO             MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO             MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO             MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO             MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO             MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO             MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO            MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO            MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO            MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO            MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO            MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO            MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO            MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO            MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO            MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO            MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO            MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO            MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO            MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO            MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO            MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO            MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO            MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO            MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO            MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO            MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO            MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK            MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK           MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz           MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz           MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT          MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0       MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1       MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0           MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1          MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0          MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1          MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2          MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3          MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1            MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2            MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3            MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4            MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5            MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0           MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0          MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1           MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1           MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY              MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0           MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0          MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1           MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1           MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2           MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2          MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ            MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ            MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ            MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ           MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT            MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT            MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT            MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT           MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1           MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1           MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1           MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1          MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2           MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2           MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2           MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG            MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR            MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW            MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE             MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE             MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16          MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT           MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL          MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL         MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA         MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS        MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS       MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS       MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS      MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD       MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD       MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR       MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR       MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI        MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI        MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD       MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD       MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD       MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD       MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD       MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD       MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD       MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD      MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD       MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD       MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD       MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD       MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD       MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS       MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS       MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS       MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS       MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR       MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR       MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS       MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD       MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS       MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD       MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD       MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD       MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD         MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD         MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD         MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD         MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT         MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT         MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT         MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT         MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT         MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT         MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT         MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT         MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT         MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT        MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC        MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC        MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT   MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT   MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK      MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK      MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK      MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET      MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET     MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK      MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0  MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1  MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN    MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT   MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN     MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT    MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC         MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK      MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK        MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK        MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK      MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK      MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM        MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM        MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD         MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD         MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD         MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN      MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK        MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK        MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK        MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK        MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK        MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK      MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM        MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM        MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM        MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM        MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD         MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD         MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD         MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD         MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD         MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD         MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD         MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD         MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD         MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK      MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK      MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN      MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN      MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK        MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK        MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK        MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK        MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK      MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM        MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM        MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM        MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD         MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD         MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD         MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD         MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD         MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD         MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK          MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0        MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1       MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2       MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3       MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD         MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0        MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1        MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2        MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3        MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4        MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5        MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6        MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7        MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8        MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9        MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10       MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11       MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12       MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13       MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14       MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15       MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16       MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17       MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK         MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK         MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK         MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS         MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC        MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS           MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0        MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1        MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2        MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3        MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4        MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5        MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6        MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7        MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0       MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1       MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2       MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3        MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3        MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3        MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4        MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4        MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4        MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5        MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5        MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5        MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6        MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6        MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6        MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7        MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7        MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0      MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1      MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2      MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3      MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4      MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5      MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6       MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7       MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6       MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7       MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6       MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5         MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1         MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2         MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6         MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4         MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5         MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1         MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5         MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1         MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3        MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2         MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1         MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4         MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8         MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3         MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6         MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5         MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7         MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3         MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR        MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN        MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR       MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN       MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3        MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2        MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7         MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6         MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK         MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV           MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV           MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK         MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0         MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK         MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV           MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV           MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK         MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0         MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5         MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3         MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2         MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4         MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK         MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK         MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1         MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0         MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5         MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4         MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV           MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV           MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4         MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5         MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6         MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5         MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4         MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0         MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3        MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2        MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1        MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9        MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8        MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7        MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1        MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0            MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1           MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2           MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK             MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK             MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST            MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST            MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET            MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN             MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN             MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0      MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1      MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2      MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3      MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK        MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB        MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT       MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0      MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1      MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2      MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3      MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK        MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB        MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT       MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS             MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO          MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS          MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK           MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h
new file mode 100644
index 000000000000..db8d890d237c
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mfp-pxa2xx.h
@@ -0,0 +1,132 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <asm/arch/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ *  MFP_PIN(x)
+ *  MFP_AFx
+ *  MFP_LPM_DRIVE_{LOW, HIGH}
+ *  MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit     23 - Input/Output (PXA2xx specific)
+ * bit     24 - Wakeup Enable(PXA2xx specific)
+ */
+
+#define MFP_DIR_IN              (0x0 << 23)
+#define MFP_DIR_OUT             (0x1 << 23)
+#define MFP_DIR_MASK            (0x1 << 23)
+#define MFP_DIR(x)              (((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP      (0x1 << 24)
+#define WAKEUP_ON_EDGE_RISE     (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL     (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH     (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH    (MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af)             \
+        ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+         (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE:  pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state)     \
+        ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+         (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO      MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO      MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO      MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO     MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO     MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO     MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO     MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO     MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO     MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO     MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO     MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO     MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO     MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO     MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO     MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO     MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO     MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO     MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO     MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO     MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO     MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO     MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO     MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO     MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO     MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO     MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO     MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO     MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO     MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO     MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO     MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO     MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO     MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO     MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO     MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO     MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO     MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO     MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO     MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO     MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO     MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO     MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO     MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO     MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO     MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO     MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO     MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO     MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO     MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO     MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO     MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO     MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO     MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO     MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO     MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO     MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO     MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO     MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO     MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO     MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO     MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO     MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO     MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO     MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO     MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO     MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO     MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO     MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO     MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO     MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO     MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO     MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO     MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO     MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO     MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO     MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO     MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO     MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 2357a73340d4..a322012f16ac 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1129,6 +1129,11 @@
 #define ICPR            __REG(0x40D00010)  /* Interrupt Controller Pending Register */
 #define ICCR            __REG(0x40D00014)  /* Interrupt Controller Control Register */
 
+#define ICIP2           __REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2           __REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2           __REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2           __REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2           __REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
 
 /*
  * General Purpose I/O
@@ -1200,12 +1205,6 @@
 
 /* Interrupt Controller */
 
-#define ICIP2           __REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2           __REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2           __REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2           __REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2           __REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-
 #define _GPLR(x)        __REG2(0x40E00000, ((x) & 0x60) >> 3)
 #define _GPDR(x)        __REG2(0x40E0000C, ((x) & 0x60) >> 3)
 #define _GPSR(x)        __REG2(0x40E00018, ((x) & 0x60) >> 3)
@@ -1237,267 +1236,6 @@
 
 #endif
 
-
-/* GPIO alternate function assignments */
-
-#define GPIO1_RST               1       /* reset */
-#define GPIO6_MMCCLK            6       /* MMC Clock */
-#define GPIO7_48MHz             7       /* 48 MHz clock output */
-#define GPIO8_MMCCS0            8       /* MMC Chip Select 0 */
-#define GPIO9_MMCCS1            9       /* MMC Chip Select 1 */
-#define GPIO10_RTCCLK           10      /* real time clock (1 Hz) */
-#define GPIO11_3_6MHz           11      /* 3.6 MHz oscillator out */
-#define GPIO12_32KHz            12      /* 32 kHz out */
-#define GPIO13_MBGNT            13      /* memory controller grant */
-#define GPIO14_MBREQ            14      /* alternate bus master request */
-#define GPIO15_nCS_1            15      /* chip select 1 */
-#define GPIO16_PWM0             16      /* PWM0 output */
-#define GPIO17_PWM1             17      /* PWM1 output */
-#define GPIO18_RDY              18      /* Ext. Bus Ready */
-#define GPIO19_DREQ1            19      /* External DMA Request */
-#define GPIO20_DREQ0            20      /* External DMA Request */
-#define GPIO23_SCLK             23      /* SSP clock */
-#define GPIO24_SFRM             24      /* SSP Frame */
-#define GPIO25_STXD             25      /* SSP transmit */
-#define GPIO26_SRXD             26      /* SSP receive */
-#define GPIO27_SEXTCLK          27      /* SSP ext_clk */
-#define GPIO28_BITCLK           28      /* AC97/I2S bit_clk */
-#define GPIO29_SDATA_IN         29      /* AC97 Sdata_in0 / I2S Sdata_in */
-#define GPIO30_SDATA_OUT        30      /* AC97/I2S Sdata_out */
-#define GPIO31_SYNC             31      /* AC97/I2S sync */
-#define GPIO32_SDATA_IN1        32      /* AC97 Sdata_in1 */
-#define GPIO32_SYSCLK           32      /* I2S System Clock */
-#define GPIO32_MMCCLK           32      /* MMC Clock (PXA270) */
-#define GPIO33_nCS_5            33      /* chip select 5 */
-#define GPIO34_FFRXD            34      /* FFUART receive */
-#define GPIO34_MMCCS0           34      /* MMC Chip Select 0 */
-#define GPIO35_FFCTS            35      /* FFUART Clear to send */
-#define GPIO36_FFDCD            36      /* FFUART Data carrier detect */
-#define GPIO37_FFDSR            37      /* FFUART data set ready */
-#define GPIO38_FFRI             38      /* FFUART Ring Indicator */
-#define GPIO39_MMCCS1           39      /* MMC Chip Select 1 */
-#define GPIO39_FFTXD            39      /* FFUART transmit data */
-#define GPIO40_FFDTR            40      /* FFUART data terminal Ready */
-#define GPIO41_FFRTS            41      /* FFUART request to send */
-#define GPIO42_BTRXD            42      /* BTUART receive data */
-#define GPIO42_HWRXD            42      /* HWUART receive data */
-#define GPIO43_BTTXD            43      /* BTUART transmit data */
-#define GPIO43_HWTXD            43      /* HWUART transmit data */
-#define GPIO44_BTCTS            44      /* BTUART clear to send */
-#define GPIO44_HWCTS            44      /* HWUART clear to send */
-#define GPIO45_BTRTS            45      /* BTUART request to send */
-#define GPIO45_HWRTS            45      /* HWUART request to send */
-#define GPIO45_AC97_SYSCLK      45      /* AC97 System Clock */
-#define GPIO46_ICPRXD           46      /* ICP receive data */
-#define GPIO46_STRXD            46      /* STD_UART receive data */
-#define GPIO47_ICPTXD           47      /* ICP transmit data */
-#define GPIO47_STTXD            47      /* STD_UART transmit data */
-#define GPIO48_nPOE             48      /* Output Enable for Card Space */
-#define GPIO49_nPWE             49      /* Write Enable for Card Space */
-#define GPIO50_nPIOR            50      /* I/O Read for Card Space */
-#define GPIO51_nPIOW            51      /* I/O Write for Card Space */
-#define GPIO52_nPCE_1           52      /* Card Enable for Card Space */
-#define GPIO53_nPCE_2           53      /* Card Enable for Card Space */
-#define GPIO53_MMCCLK           53      /* MMC Clock */
-#define GPIO54_MMCCLK           54      /* MMC Clock */
-#define GPIO54_pSKTSEL          54      /* Socket Select for Card Space */
-#define GPIO54_nPCE_2           54      /* Card Enable for Card Space (PXA27x) */
-#define GPIO55_nPREG            55      /* Card Address bit 26 */
-#define GPIO56_nPWAIT           56      /* Wait signal for Card Space */
-#define GPIO57_nIOIS16          57      /* Bus Width select for I/O Card Space */
-#define GPIO58_LDD_0            58      /* LCD data pin 0 */
-#define GPIO59_LDD_1            59      /* LCD data pin 1 */
-#define GPIO60_LDD_2            60      /* LCD data pin 2 */
-#define GPIO61_LDD_3            61      /* LCD data pin 3 */
-#define GPIO62_LDD_4            62      /* LCD data pin 4 */
-#define GPIO63_LDD_5            63      /* LCD data pin 5 */
-#define GPIO64_LDD_6            64      /* LCD data pin 6 */
-#define GPIO65_LDD_7            65      /* LCD data pin 7 */
-#define GPIO66_LDD_8            66      /* LCD data pin 8 */
-#define GPIO66_MBREQ            66      /* alternate bus master req */
-#define GPIO67_LDD_9            67      /* LCD data pin 9 */
-#define GPIO67_MMCCS0           67      /* MMC Chip Select 0 */
-#define GPIO68_LDD_10           68      /* LCD data pin 10 */
-#define GPIO68_MMCCS1           68      /* MMC Chip Select 1 */
-#define GPIO69_LDD_11           69      /* LCD data pin 11 */
-#define GPIO69_MMCCLK           69      /* MMC_CLK */
-#define GPIO70_LDD_12           70      /* LCD data pin 12 */
-#define GPIO70_RTCCLK           70      /* Real Time clock (1 Hz) */
-#define GPIO71_LDD_13           71      /* LCD data pin 13 */
-#define GPIO71_3_6MHz           71      /* 3.6 MHz Oscillator clock */
-#define GPIO72_LDD_14           72      /* LCD data pin 14 */
-#define GPIO72_32kHz            72      /* 32 kHz clock */
-#define GPIO73_LDD_15           73      /* LCD data pin 15 */
-#define GPIO73_MBGNT            73      /* Memory controller grant */
-#define GPIO74_LCD_FCLK         74      /* LCD Frame clock */
-#define GPIO75_LCD_LCLK         75      /* LCD line clock */
-#define GPIO76_LCD_PCLK         76      /* LCD Pixel clock */
-#define GPIO77_LCD_ACBIAS       77      /* LCD AC Bias */
-#define GPIO78_nCS_2            78      /* chip select 2 */
-#define GPIO79_nCS_3            79      /* chip select 3 */
-#define GPIO80_nCS_4            80      /* chip select 4 */
-#define GPIO81_NSCLK            81      /* NSSP clock */
-#define GPIO82_NSFRM            82      /* NSSP Frame */
-#define GPIO83_NSTXD            83      /* NSSP transmit */
-#define GPIO84_NSRXD            84      /* NSSP receive */
-#define GPIO85_nPCE_1           85      /* Card Enable for Card Space (PXA27x) */
-#define GPIO92_MMCDAT0          92      /* MMC DAT0 (PXA27x) */
-#define GPIO102_nPCE_1          102     /* PCMCIA (PXA27x) */
-#define GPIO109_MMCDAT1         109     /* MMC DAT1 (PXA27x) */
-#define GPIO110_MMCDAT2         110     /* MMC DAT2 (PXA27x) */
-#define GPIO110_MMCCS0          110     /* MMC Chip Select 0 (PXA27x) */
-#define GPIO111_MMCDAT3         111     /* MMC DAT3 (PXA27x) */
-#define GPIO111_MMCCS1          111     /* MMC Chip Select 1 (PXA27x) */
-#define GPIO112_MMCCMD          112     /* MMC CMD (PXA27x) */
-#define GPIO113_I2S_SYSCLK      113     /* I2S System Clock (PXA27x) */
-#define GPIO113_AC97_RESET_N    113     /* AC97 NRESET on (PXA27x) */
-
-/* GPIO alternate function mode & direction */
-
-#define GPIO_IN                 0x000
-#define GPIO_OUT                0x080
-#define GPIO_ALT_FN_1_IN        0x100
-#define GPIO_ALT_FN_1_OUT       0x180
-#define GPIO_ALT_FN_2_IN        0x200
-#define GPIO_ALT_FN_2_OUT       0x280
-#define GPIO_ALT_FN_3_IN        0x300
-#define GPIO_ALT_FN_3_OUT       0x380
-#define GPIO_MD_MASK_NR         0x07f
-#define GPIO_MD_MASK_DIR        0x080
-#define GPIO_MD_MASK_FN         0x300
-#define GPIO_DFLT_LOW           0x400
-#define GPIO_DFLT_HIGH          0x800
-
-#define GPIO1_RTS_MD            ( 1 | GPIO_ALT_FN_1_IN)
-#define GPIO6_MMCCLK_MD         ( 6 | GPIO_ALT_FN_1_OUT)
-#define GPIO7_48MHz_MD          ( 7 | GPIO_ALT_FN_1_OUT)
-#define GPIO8_MMCCS0_MD         ( 8 | GPIO_ALT_FN_1_OUT)
-#define GPIO9_MMCCS1_MD         ( 9 | GPIO_ALT_FN_1_OUT)
-#define GPIO10_RTCCLK_MD        (10 | GPIO_ALT_FN_1_OUT)
-#define GPIO11_3_6MHz_MD        (11 | GPIO_ALT_FN_1_OUT)
-#define GPIO12_32KHz_MD         (12 | GPIO_ALT_FN_1_OUT)
-#define GPIO13_MBGNT_MD         (13 | GPIO_ALT_FN_2_OUT)
-#define GPIO14_MBREQ_MD         (14 | GPIO_ALT_FN_1_IN)
-#define GPIO15_nCS_1_MD         (15 | GPIO_ALT_FN_2_OUT)
-#define GPIO16_PWM0_MD          (16 | GPIO_ALT_FN_2_OUT)
-#define GPIO17_PWM1_MD          (17 | GPIO_ALT_FN_2_OUT)
-#define GPIO18_RDY_MD           (18 | GPIO_ALT_FN_1_IN)
-#define GPIO19_DREQ1_MD         (19 | GPIO_ALT_FN_1_IN)
-#define GPIO20_DREQ0_MD         (20 | GPIO_ALT_FN_1_IN)
-#define GPIO23_SCLK_MD          (23 | GPIO_ALT_FN_2_OUT)
-#define GPIO24_SFRM_MD          (24 | GPIO_ALT_FN_2_OUT)
-#define GPIO25_STXD_MD          (25 | GPIO_ALT_FN_2_OUT)
-#define GPIO26_SRXD_MD          (26 | GPIO_ALT_FN_1_IN)
-#define GPIO27_SEXTCLK_MD       (27 | GPIO_ALT_FN_1_IN)
-#define GPIO28_BITCLK_AC97_MD   (28 | GPIO_ALT_FN_1_IN)
-#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN)
-#define GPIO28_BITCLK_OUT_I2S_MD        (28 | GPIO_ALT_FN_1_OUT)
-#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
-#define GPIO29_SDATA_IN_I2S_MD  (29 | GPIO_ALT_FN_2_IN)
-#define GPIO30_SDATA_OUT_AC97_MD        (30 | GPIO_ALT_FN_2_OUT)
-#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
-#define GPIO31_SYNC_I2S_MD      (31 | GPIO_ALT_FN_1_OUT)
-#define GPIO31_SYNC_AC97_MD     (31 | GPIO_ALT_FN_2_OUT)
-#define GPIO32_SDATA_IN1_AC97_MD        (32 | GPIO_ALT_FN_1_IN)
-#define GPIO32_SYSCLK_I2S_MD    (32 | GPIO_ALT_FN_1_OUT)
-#define GPIO32_MMCCLK_MD                ( 32 | GPIO_ALT_FN_2_OUT)
-#define GPIO33_nCS_5_MD         (33 | GPIO_ALT_FN_2_OUT)
-#define GPIO34_FFRXD_MD         (34 | GPIO_ALT_FN_1_IN)
-#define GPIO34_MMCCS0_MD        (34 | GPIO_ALT_FN_2_OUT)
-#define GPIO35_FFCTS_MD         (35 | GPIO_ALT_FN_1_IN)
-#define GPIO36_FFDCD_MD         (36 | GPIO_ALT_FN_1_IN)
-#define GPIO37_FFDSR_MD         (37 | GPIO_ALT_FN_1_IN)
-#define GPIO38_FFRI_MD          (38 | GPIO_ALT_FN_1_IN)
-#define GPIO39_MMCCS1_MD        (39 | GPIO_ALT_FN_1_OUT)
-#define GPIO39_FFTXD_MD         (39 | GPIO_ALT_FN_2_OUT)
-#define GPIO40_FFDTR_MD         (40 | GPIO_ALT_FN_2_OUT)
-#define GPIO41_FFRTS_MD         (41 | GPIO_ALT_FN_2_OUT)
-#define GPIO42_BTRXD_MD         (42 | GPIO_ALT_FN_1_IN)
-#define GPIO42_HWRXD_MD         (42 | GPIO_ALT_FN_3_IN)
-#define GPIO43_BTTXD_MD         (43 | GPIO_ALT_FN_2_OUT)
-#define GPIO43_HWTXD_MD         (43 | GPIO_ALT_FN_3_OUT)
-#define GPIO44_BTCTS_MD         (44 | GPIO_ALT_FN_1_IN)
-#define GPIO44_HWCTS_MD         (44 | GPIO_ALT_FN_3_IN)
-#define GPIO45_BTRTS_MD         (45 | GPIO_ALT_FN_2_OUT)
-#define GPIO45_HWRTS_MD         (45 | GPIO_ALT_FN_3_OUT)
-#define GPIO45_SYSCLK_AC97_MD           (45 | GPIO_ALT_FN_1_OUT)
-#define GPIO46_ICPRXD_MD        (46 | GPIO_ALT_FN_1_IN)
-#define GPIO46_STRXD_MD         (46 | GPIO_ALT_FN_2_IN)
-#define GPIO47_ICPTXD_MD        (47 | GPIO_ALT_FN_2_OUT)
-#define GPIO47_STTXD_MD         (47 | GPIO_ALT_FN_1_OUT)
-#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
-#define GPIO48_HWTXD_MD         (48 | GPIO_ALT_FN_1_OUT)
-#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
-#define GPIO49_HWRXD_MD         (49 | GPIO_ALT_FN_1_IN)
-#define GPIO49_nPWE_MD          (49 | GPIO_ALT_FN_2_OUT)
-#define GPIO50_nPIOR_MD         (50 | GPIO_ALT_FN_2_OUT)
-#define GPIO50_HWCTS_MD         (50 | GPIO_ALT_FN_1_IN)
-#define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
-#define GPIO51_nPIOW_MD         (51 | GPIO_ALT_FN_2_OUT)
-#define GPIO52_nPCE_1_MD        (52 | GPIO_ALT_FN_2_OUT)
-#define GPIO53_nPCE_2_MD        (53 | GPIO_ALT_FN_2_OUT)
-#define GPIO53_MMCCLK_MD        (53 | GPIO_ALT_FN_1_OUT)
-#define GPIO54_MMCCLK_MD        (54 | GPIO_ALT_FN_1_OUT)
-#define GPIO54_nPCE_2_MD        (54 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_pSKTSEL_MD       (54 | GPIO_ALT_FN_2_OUT)
-#define GPIO55_nPREG_MD         (55 | GPIO_ALT_FN_2_OUT)
-#define GPIO56_nPWAIT_MD        (56 | GPIO_ALT_FN_1_IN)
-#define GPIO57_nIOIS16_MD       (57 | GPIO_ALT_FN_1_IN)
-#define GPIO58_LDD_0_MD         (58 | GPIO_ALT_FN_2_OUT)
-#define GPIO59_LDD_1_MD         (59 | GPIO_ALT_FN_2_OUT)
-#define GPIO60_LDD_2_MD         (60 | GPIO_ALT_FN_2_OUT)
-#define GPIO61_LDD_3_MD         (61 | GPIO_ALT_FN_2_OUT)
-#define GPIO62_LDD_4_MD         (62 | GPIO_ALT_FN_2_OUT)
-#define GPIO63_LDD_5_MD         (63 | GPIO_ALT_FN_2_OUT)
-#define GPIO64_LDD_6_MD         (64 | GPIO_ALT_FN_2_OUT)
-#define GPIO65_LDD_7_MD         (65 | GPIO_ALT_FN_2_OUT)
-#define GPIO66_LDD_8_MD         (66 | GPIO_ALT_FN_2_OUT)
-#define GPIO66_MBREQ_MD         (66 | GPIO_ALT_FN_1_IN)
-#define GPIO67_LDD_9_MD         (67 | GPIO_ALT_FN_2_OUT)
-#define GPIO67_MMCCS0_MD        (67 | GPIO_ALT_FN_1_OUT)
-#define GPIO68_LDD_10_MD        (68 | GPIO_ALT_FN_2_OUT)
-#define GPIO68_MMCCS1_MD        (68 | GPIO_ALT_FN_1_OUT)
-#define GPIO69_LDD_11_MD        (69 | GPIO_ALT_FN_2_OUT)
-#define GPIO69_MMCCLK_MD        (69 | GPIO_ALT_FN_1_OUT)
-#define GPIO70_LDD_12_MD        (70 | GPIO_ALT_FN_2_OUT)
-#define GPIO70_RTCCLK_MD        (70 | GPIO_ALT_FN_1_OUT)
-#define GPIO71_LDD_13_MD        (71 | GPIO_ALT_FN_2_OUT)
-#define GPIO71_3_6MHz_MD        (71 | GPIO_ALT_FN_1_OUT)
-#define GPIO72_LDD_14_MD        (72 | GPIO_ALT_FN_2_OUT)
-#define GPIO72_32kHz_MD         (72 | GPIO_ALT_FN_1_OUT)
-#define GPIO73_LDD_15_MD        (73 | GPIO_ALT_FN_2_OUT)
-#define GPIO73_MBGNT_MD         (73 | GPIO_ALT_FN_1_OUT)
-#define GPIO74_LCD_FCLK_MD      (74 | GPIO_ALT_FN_2_OUT)
-#define GPIO75_LCD_LCLK_MD      (75 | GPIO_ALT_FN_2_OUT)
-#define GPIO76_LCD_PCLK_MD      (76 | GPIO_ALT_FN_2_OUT)
-#define GPIO77_LCD_ACBIAS_MD    (77 | GPIO_ALT_FN_2_OUT)
-#define GPIO78_nCS_2_MD         (78 | GPIO_ALT_FN_2_OUT)
-#define GPIO79_nCS_3_MD         (79 | GPIO_ALT_FN_2_OUT)
-#define GPIO79_pSKTSEL_MD       (79 | GPIO_ALT_FN_1_OUT)
-#define GPIO80_nCS_4_MD         (80 | GPIO_ALT_FN_2_OUT)
-#define GPIO81_NSSP_CLK_OUT     (81 | GPIO_ALT_FN_1_OUT)
-#define GPIO81_NSSP_CLK_IN      (81 | GPIO_ALT_FN_1_IN)
-#define GPIO82_NSSP_FRM_OUT     (82 | GPIO_ALT_FN_1_OUT)
-#define GPIO82_NSSP_FRM_IN      (82 | GPIO_ALT_FN_1_IN)
-#define GPIO83_NSSP_TX          (83 | GPIO_ALT_FN_1_OUT)
-#define GPIO83_NSSP_RX          (83 | GPIO_ALT_FN_2_IN)
-#define GPIO84_NSSP_TX          (84 | GPIO_ALT_FN_1_OUT)
-#define GPIO84_NSSP_RX          (84 | GPIO_ALT_FN_2_IN)
-#define GPIO85_nPCE_1_MD        (85 | GPIO_ALT_FN_1_OUT)
-#define GPIO92_MMCDAT0_MD       (92 | GPIO_ALT_FN_1_OUT)
-#define GPIO102_nPCE_1_MD       (102 | GPIO_ALT_FN_1_OUT)
-#define GPIO104_pSKTSEL_MD      (104 | GPIO_ALT_FN_1_OUT)
-#define GPIO109_MMCDAT1_MD      (109 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCDAT2_MD      (110 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCCS0_MD       (110 | GPIO_ALT_FN_1_OUT)
-#define GPIO111_MMCDAT3_MD      (111 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCCS1_MD       (111 | GPIO_ALT_FN_1_OUT)
-#define GPIO112_MMCCMD_MD       (112 | GPIO_ALT_FN_1_OUT)
-#define GPIO113_I2S_SYSCLK_MD   (113 | GPIO_ALT_FN_1_OUT)
-#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT)
-#define GPIO117_I2CSCL_MD       (117 | GPIO_ALT_FN_1_IN)
-#define GPIO118_I2CSDA_MD       (118 | GPIO_ALT_FN_1_IN)
-
 /*
  * Power Manager
  */
@@ -1866,62 +1604,6 @@
 
 #ifdef CONFIG_PXA27x
 
-/*
- * Keypad
- */
-#define KPC             __REG(0x41500000) /* Keypad Interface Control register */
-#define KPDK            __REG(0x41500008) /* Keypad Interface Direct Key register */
-#define KPREC           __REG(0x41500010) /* Keypad Interface Rotary Encoder register */
-#define KPMK            __REG(0x41500018) /* Keypad Interface Matrix Key register */
-#define KPAS            __REG(0x41500020) /* Keypad Interface Automatic Scan register */
-#define KPASMKP0        __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
-#define KPASMKP1        __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
-#define KPASMKP2        __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
-#define KPASMKP3        __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
-#define KPKDI           __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */
-
-#define KPC_AS          (0x1 << 30)  /* Automatic Scan bit */
-#define KPC_ASACT       (0x1 << 29)  /* Automatic Scan on Activity */
-#define KPC_MI          (0x1 << 22)  /* Matrix interrupt bit */
-#define KPC_IMKP        (0x1 << 21)  /* Ignore Multiple Key Press */
-#define KPC_MS7         (0x1 << 20)  /* Matrix scan line 7 */
-#define KPC_MS6         (0x1 << 19)  /* Matrix scan line 6 */
-#define KPC_MS5         (0x1 << 18)  /* Matrix scan line 5 */
-#define KPC_MS4         (0x1 << 17)  /* Matrix scan line 4 */
-#define KPC_MS3         (0x1 << 16)  /* Matrix scan line 3 */
-#define KPC_MS2         (0x1 << 15)  /* Matrix scan line 2 */
-#define KPC_MS1         (0x1 << 14)  /* Matrix scan line 1 */
-#define KPC_MS0         (0x1 << 13)  /* Matrix scan line 0 */
-#define KPC_MS_ALL      (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7)
-#define KPC_ME          (0x1 << 12)  /* Matrix Keypad Enable */
-#define KPC_MIE         (0x1 << 11)  /* Matrix Interrupt Enable */
-#define KPC_DK_DEB_SEL  (0x1 <<  9)  /* Direct Keypad Debounce Select */
-#define KPC_DI          (0x1 <<  5)  /* Direct key interrupt bit */
-#define KPC_RE_ZERO_DEB (0x1 <<  4)  /* Rotary Encoder Zero Debounce */
-#define KPC_REE1        (0x1 <<  3)  /* Rotary Encoder1 Enable */
-#define KPC_REE0        (0x1 <<  2)  /* Rotary Encoder0 Enable */
-#define KPC_DE          (0x1 <<  1)  /* Direct Keypad Enable */
-#define KPC_DIE         (0x1 <<  0)  /* Direct Keypad interrupt Enable */
-
-#define KPDK_DKP        (0x1 << 31)
-#define KPDK_DK7        (0x1 <<  7)
-#define KPDK_DK6        (0x1 <<  6)
-#define KPDK_DK5        (0x1 <<  5)
-#define KPDK_DK4        (0x1 <<  4)
-#define KPDK_DK3        (0x1 <<  3)
-#define KPDK_DK2        (0x1 <<  2)
-#define KPDK_DK1        (0x1 <<  1)
-#define KPDK_DK0        (0x1 <<  0)
-
-#define KPREC_OF1       (0x1 << 31)
-#define kPREC_UF1       (0x1 << 30)
-#define KPREC_OF0       (0x1 << 15)
-#define KPREC_UF0       (0x1 << 14)
-
-#define KPMK_MKP        (0x1 << 31)
-#define KPAS_SO         (0x1 << 31)
-#define KPASMKPx_SO     (0x1 << 31)
-
 /* Camera Interface */
 #define CICR0           __REG(0x50000000)
 #define CICR1           __REG(0x50000004)
@@ -1953,7 +1635,7 @@
 #define CICR0_FOM       (1 << 0)        /* FIFO-overrun mask */
 
 #define CICR1_TBIT      (1 << 31)       /* Transparency bit */
-#define CICR1_RGBT_CONV (0x3 << 30)     /* RGBT conversion mask */
+#define CICR1_RGBT_CONV (0x3 << 29)     /* RGBT conversion mask */
 #define CICR1_PPL       (0x7ff << 15)   /* Pixels per line mask */
 #define CICR1_RGB_CONV  (0x7 << 12)     /* RGB conversion mask */
 #define CICR1_RGB_F     (1 << 11)       /* RGB format */
diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/include/asm-arm/arch-pxa/pxa27x_keypad.h
index 644f7609b523..d5a48a96dea7 100644
--- a/include/asm-arm/arch-pxa/pxa27x_keypad.h
+++ b/include/asm-arm/arch-pxa/pxa27x_keypad.h
@@ -53,4 +53,6 @@ struct pxa27x_keypad_platform_data {
 
 #define KEY(row, col, val)      (((row) << 28) | ((col) << 24) | (val))
 
+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
+
 #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
new file mode 100644
index 000000000000..763313c5e6be
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
@@ -0,0 +1,357 @@
+#ifndef __ASM_ARCH_PXA2XX_GPIO_H
+#define __ASM_ARCH_PXA2XX_GPIO_H
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST               1       /* reset */
+#define GPIO6_MMCCLK            6       /* MMC Clock */
+#define GPIO7_48MHz             7       /* 48 MHz clock output */
+#define GPIO8_MMCCS0            8       /* MMC Chip Select 0 */
+#define GPIO9_MMCCS1            9       /* MMC Chip Select 1 */
+#define GPIO10_RTCCLK           10      /* real time clock (1 Hz) */
+#define GPIO11_3_6MHz           11      /* 3.6 MHz oscillator out */
+#define GPIO12_32KHz            12      /* 32 kHz out */
+#define GPIO12_CIF_DD_7         12      /* Camera data pin 7 */
+#define GPIO13_MBGNT            13      /* memory controller grant */
+#define GPIO14_MBREQ            14      /* alternate bus master request */
+#define GPIO15_nCS_1            15      /* chip select 1 */
+#define GPIO16_PWM0             16      /* PWM0 output */
+#define GPIO17_PWM1             17      /* PWM1 output */
+#define GPIO17_CIF_DD_6         17      /* Camera data pin 6 */
+#define GPIO18_RDY              18      /* Ext. Bus Ready */
+#define GPIO19_DREQ1            19      /* External DMA Request */
+#define GPIO20_DREQ0            20      /* External DMA Request */
+#define GPIO23_SCLK             23      /* SSP clock */
+#define GPIO23_CIF_MCLK         23      /* Camera Master Clock */
+#define GPIO24_SFRM             24      /* SSP Frame */
+#define GPIO24_CIF_FV           24      /* Camera frame start signal */
+#define GPIO25_STXD             25      /* SSP transmit */
+#define GPIO25_CIF_LV           25      /* Camera line start signal */
+#define GPIO26_SRXD             26      /* SSP receive */
+#define GPIO26_CIF_PCLK         26      /* Camera Pixel Clock */
+#define GPIO27_SEXTCLK          27      /* SSP ext_clk */
+#define GPIO27_CIF_DD_0         27      /* Camera data pin 0 */
+#define GPIO28_BITCLK           28      /* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN         29      /* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT        30      /* AC97/I2S Sdata_out */
+#define GPIO31_SYNC             31      /* AC97/I2S sync */
+#define GPIO32_SDATA_IN1        32      /* AC97 Sdata_in1 */
+#define GPIO32_SYSCLK           32      /* I2S System Clock */
+#define GPIO32_MMCCLK           32      /* MMC Clock (PXA270) */
+#define GPIO33_nCS_5            33      /* chip select 5 */
+#define GPIO34_FFRXD            34      /* FFUART receive */
+#define GPIO34_MMCCS0           34      /* MMC Chip Select 0 */
+#define GPIO35_FFCTS            35      /* FFUART Clear to send */
+#define GPIO36_FFDCD            36      /* FFUART Data carrier detect */
+#define GPIO37_FFDSR            37      /* FFUART data set ready */
+#define GPIO38_FFRI             38      /* FFUART Ring Indicator */
+#define GPIO39_MMCCS1           39      /* MMC Chip Select 1 */
+#define GPIO39_FFTXD            39      /* FFUART transmit data */
+#define GPIO40_FFDTR            40      /* FFUART data terminal Ready */
+#define GPIO41_FFRTS            41      /* FFUART request to send */
+#define GPIO42_BTRXD            42      /* BTUART receive data */
+#define GPIO42_HWRXD            42      /* HWUART receive data */
+#define GPIO42_CIF_MCLK         42      /* Camera Master Clock */
+#define GPIO43_BTTXD            43      /* BTUART transmit data */
+#define GPIO43_HWTXD            43      /* HWUART transmit data */
+#define GPIO43_CIF_FV           43      /* Camera frame start signal */
+#define GPIO44_BTCTS            44      /* BTUART clear to send */
+#define GPIO44_HWCTS            44      /* HWUART clear to send */
+#define GPIO44_CIF_LV           44      /* Camera line start signal */
+#define GPIO45_BTRTS            45      /* BTUART request to send */
+#define GPIO45_HWRTS            45      /* HWUART request to send */
+#define GPIO45_AC97_SYSCLK      45      /* AC97 System Clock */
+#define GPIO45_CIF_PCLK         45      /* Camera Pixel Clock */
+#define GPIO46_ICPRXD           46      /* ICP receive data */
+#define GPIO46_STRXD            46      /* STD_UART receive data */
+#define GPIO47_ICPTXD           47      /* ICP transmit data */
+#define GPIO47_STTXD            47      /* STD_UART transmit data */
+#define GPIO47_CIF_DD_0         47      /* Camera data pin 0 */
+#define GPIO48_nPOE             48      /* Output Enable for Card Space */
+#define GPIO48_CIF_DD_5         48      /* Camera data pin 5 */
+#define GPIO49_nPWE             49      /* Write Enable for Card Space */
+#define GPIO50_nPIOR            50      /* I/O Read for Card Space */
+#define GPIO50_CIF_DD_3         50      /* Camera data pin 3 */
+#define GPIO51_nPIOW            51      /* I/O Write for Card Space */
+#define GPIO51_CIF_DD_2         51      /* Camera data pin 2 */
+#define GPIO52_nPCE_1           52      /* Card Enable for Card Space */
+#define GPIO52_CIF_DD_4         52      /* Camera data pin 4 */
+#define GPIO53_nPCE_2           53      /* Card Enable for Card Space */
+#define GPIO53_MMCCLK           53      /* MMC Clock */
+#define GPIO53_CIF_MCLK         53      /* Camera Master Clock */
+#define GPIO54_MMCCLK           54      /* MMC Clock */
+#define GPIO54_pSKTSEL          54      /* Socket Select for Card Space */
+#define GPIO54_nPCE_2           54      /* Card Enable for Card Space (PXA27x) */
+#define GPIO54_CIF_PCLK         54      /* Camera Pixel Clock */
+#define GPIO55_nPREG            55      /* Card Address bit 26 */
+#define GPIO55_CIF_DD_1         55      /* Camera data pin 1 */
+#define GPIO56_nPWAIT           56      /* Wait signal for Card Space */
+#define GPIO57_nIOIS16          57      /* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0            58      /* LCD data pin 0 */
+#define GPIO59_LDD_1            59      /* LCD data pin 1 */
+#define GPIO60_LDD_2            60      /* LCD data pin 2 */
+#define GPIO61_LDD_3            61      /* LCD data pin 3 */
+#define GPIO62_LDD_4            62      /* LCD data pin 4 */
+#define GPIO63_LDD_5            63      /* LCD data pin 5 */
+#define GPIO64_LDD_6            64      /* LCD data pin 6 */
+#define GPIO65_LDD_7            65      /* LCD data pin 7 */
+#define GPIO66_LDD_8            66      /* LCD data pin 8 */
+#define GPIO66_MBREQ            66      /* alternate bus master req */
+#define GPIO67_LDD_9            67      /* LCD data pin 9 */
+#define GPIO67_MMCCS0           67      /* MMC Chip Select 0 */
+#define GPIO68_LDD_10           68      /* LCD data pin 10 */
+#define GPIO68_MMCCS1           68      /* MMC Chip Select 1 */
+#define GPIO69_LDD_11           69      /* LCD data pin 11 */
+#define GPIO69_MMCCLK           69      /* MMC_CLK */
+#define GPIO70_LDD_12           70      /* LCD data pin 12 */
+#define GPIO70_RTCCLK           70      /* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13           71      /* LCD data pin 13 */
+#define GPIO71_3_6MHz           71      /* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14           72      /* LCD data pin 14 */
+#define GPIO72_32kHz            72      /* 32 kHz clock */
+#define GPIO73_LDD_15           73      /* LCD data pin 15 */
+#define GPIO73_MBGNT            73      /* Memory controller grant */
+#define GPIO74_LCD_FCLK         74      /* LCD Frame clock */
+#define GPIO75_LCD_LCLK         75      /* LCD line clock */
+#define GPIO76_LCD_PCLK         76      /* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS       77      /* LCD AC Bias */
+#define GPIO78_nCS_2            78      /* chip select 2 */
+#define GPIO79_nCS_3            79      /* chip select 3 */
+#define GPIO80_nCS_4            80      /* chip select 4 */
+#define GPIO81_NSCLK            81      /* NSSP clock */
+#define GPIO81_CIF_DD_0         81      /* Camera data pin 0 */
+#define GPIO82_NSFRM            82      /* NSSP Frame */
+#define GPIO82_CIF_DD_5         82      /* Camera data pin 5 */
+#define GPIO83_NSTXD            83      /* NSSP transmit */
+#define GPIO83_CIF_DD_4         83      /* Camera data pin 4 */
+#define GPIO84_NSRXD            84      /* NSSP receive */
+#define GPIO84_CIF_FV           84      /* Camera frame start signal */
+#define GPIO85_nPCE_1           85      /* Card Enable for Card Space (PXA27x) */
+#define GPIO85_CIF_LV           85      /* Camera line start signal */
+#define GPIO90_CIF_DD_4         90      /* Camera data pin 4 */
+#define GPIO91_CIF_DD_5         91      /* Camera data pin 5 */
+#define GPIO92_MMCDAT0          92      /* MMC DAT0 (PXA27x) */
+#define GPIO93_CIF_DD_6         93      /* Camera data pin 6 */
+#define GPIO94_CIF_DD_5         94      /* Camera data pin 5 */
+#define GPIO95_CIF_DD_4         95      /* Camera data pin 4 */
+#define GPIO98_CIF_DD_0         98      /* Camera data pin 0 */
+#define GPIO102_nPCE_1          102     /* PCMCIA (PXA27x) */
+#define GPIO103_CIF_DD_3        103     /* Camera data pin 3 */
+#define GPIO104_CIF_DD_2        104     /* Camera data pin 2 */
+#define GPIO105_CIF_DD_1        105     /* Camera data pin 1 */
+#define GPIO106_CIF_DD_9        106     /* Camera data pin 9 */
+#define GPIO107_CIF_DD_8        107     /* Camera data pin 8 */
+#define GPIO108_CIF_DD_7        108     /* Camera data pin 7 */
+#define GPIO109_MMCDAT1         109     /* MMC DAT1 (PXA27x) */
+#define GPIO110_MMCDAT2         110     /* MMC DAT2 (PXA27x) */
+#define GPIO110_MMCCS0          110     /* MMC Chip Select 0 (PXA27x) */
+#define GPIO111_MMCDAT3         111     /* MMC DAT3 (PXA27x) */
+#define GPIO111_MMCCS1          111     /* MMC Chip Select 1 (PXA27x) */
+#define GPIO112_MMCCMD          112     /* MMC CMD (PXA27x) */
+#define GPIO113_I2S_SYSCLK      113     /* I2S System Clock (PXA27x) */
+#define GPIO113_AC97_RESET_N    113     /* AC97 NRESET on (PXA27x) */
+#define GPIO114_CIF_DD_1        114     /* Camera data pin 1 */
+#define GPIO115_CIF_DD_3        115     /* Camera data pin 3 */
+#define GPIO116_CIF_DD_2        116     /* Camera data pin 2 */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN                 0x000
+#define GPIO_OUT                0x080
+#define GPIO_ALT_FN_1_IN        0x100
+#define GPIO_ALT_FN_1_OUT       0x180
+#define GPIO_ALT_FN_2_IN        0x200
+#define GPIO_ALT_FN_2_OUT       0x280
+#define GPIO_ALT_FN_3_IN        0x300
+#define GPIO_ALT_FN_3_OUT       0x380
+#define GPIO_MD_MASK_NR         0x07f
+#define GPIO_MD_MASK_DIR        0x080
+#define GPIO_MD_MASK_FN         0x300
+#define GPIO_DFLT_LOW           0x400
+#define GPIO_DFLT_HIGH          0x800
+
+#define GPIO1_RTS_MD            ( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD         ( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO7_48MHz_MD          ( 7 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD         ( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD         ( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD        (10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD        (11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD         (12 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_CIF_DD_7_MD      (12 | GPIO_ALT_FN_2_IN)
+#define GPIO13_MBGNT_MD         (13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD         (14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD         (15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD          (16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD          (17 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_CIF_DD_6_MD      (17 | GPIO_ALT_FN_2_IN)
+#define GPIO18_RDY_MD           (18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD         (19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD         (20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_CIF_MCLK_MD      (23 | GPIO_ALT_FN_1_OUT)
+#define GPIO23_SCLK_MD          (23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_CIF_FV_MD        (24 | GPIO_ALT_FN_1_OUT)
+#define GPIO24_SFRM_MD          (24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_CIF_LV_MD        (25 | GPIO_ALT_FN_1_OUT)
+#define GPIO25_STXD_MD          (25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD          (26 | GPIO_ALT_FN_1_IN)
+#define GPIO26_CIF_PCLK_MD      (26 | GPIO_ALT_FN_2_IN)
+#define GPIO27_SEXTCLK_MD       (27 | GPIO_ALT_FN_1_IN)
+#define GPIO27_CIF_DD_0_MD      (27 | GPIO_ALT_FN_3_IN)
+#define GPIO28_BITCLK_AC97_MD   (28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN)
+#define GPIO28_BITCLK_OUT_I2S_MD        (28 | GPIO_ALT_FN_1_OUT)
+#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD  (29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD        (30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_I2S_MD      (31 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD     (31 | GPIO_ALT_FN_2_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD        (32 | GPIO_ALT_FN_1_IN)
+#define GPIO32_SYSCLK_I2S_MD    (32 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_MMCCLK_MD        (32 | GPIO_ALT_FN_2_OUT)
+#define GPIO33_nCS_5_MD         (33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD         (34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD        (34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD         (35 | GPIO_ALT_FN_1_IN)
+#define GPIO35_KP_MKOUT6_MD     (35 | GPIO_ALT_FN_2_OUT)
+#define GPIO36_FFDCD_MD         (36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD         (37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD          (38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD        (39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD         (39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD         (40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD         (41 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_KP_MKOUT7_MD     (41 | GPIO_ALT_FN_1_OUT)
+#define GPIO42_BTRXD_MD         (42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD         (42 | GPIO_ALT_FN_3_IN)
+#define GPIO42_CIF_MCLK_MD      (42 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_BTTXD_MD         (43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD         (43 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_CIF_FV_MD        (43 | GPIO_ALT_FN_3_OUT)
+#define GPIO44_BTCTS_MD         (44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD         (44 | GPIO_ALT_FN_3_IN)
+#define GPIO44_CIF_LV_MD        (44 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_CIF_PCLK_MD      (45 | GPIO_ALT_FN_3_IN)
+#define GPIO45_BTRTS_MD         (45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD         (45 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_SYSCLK_AC97_MD   (45 | GPIO_ALT_FN_1_OUT)
+#define GPIO46_ICPRXD_MD        (46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD         (46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_CIF_DD_0_MD      (47 | GPIO_ALT_FN_1_IN)
+#define GPIO47_ICPTXD_MD        (47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD         (47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_CIF_DD_5_MD      (48 | GPIO_ALT_FN_1_IN)
+#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD         (48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD         (49 | GPIO_ALT_FN_1_IN)
+#define GPIO49_nPWE_MD          (49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_CIF_DD_3_MD      (50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_nPIOR_MD         (50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD         (50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_CIF_DD_3_MD      (50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_CIF_DD_2_MD      (51 | GPIO_ALT_FN_1_IN)
+#define GPIO51_nPIOW_MD         (51 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
+#define GPIO51_CIF_DD_2_MD      (51 | GPIO_ALT_FN_1_IN)
+#define GPIO52_nPCE_1_MD        (52 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_CIF_DD_4_MD      (52 | GPIO_ALT_FN_1_IN)
+#define GPIO53_nPCE_2_MD        (53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD        (53 | GPIO_ALT_FN_1_OUT)
+#define GPIO53_CIF_MCLK_MD      (53 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_MMCCLK_MD        (54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_nPCE_2_MD        (54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_pSKTSEL_MD       (54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_CIF_PCLK_MD      (54 | GPIO_ALT_FN_3_IN)
+#define GPIO55_nPREG_MD         (55 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_CIF_DD_1_MD      (55 | GPIO_ALT_FN_1_IN)
+#define GPIO56_nPWAIT_MD        (56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD       (57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD         (58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD         (59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD         (60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD         (61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD         (62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD         (63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD         (64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD         (65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD         (66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD         (66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD         (67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD        (67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD        (68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD        (68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD        (69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD        (69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD        (70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD        (70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD        (71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD        (71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD        (72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD         (72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD        (73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD         (73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD      (74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD      (75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD      (76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD    (77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD         (78 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nPCE_2_MD        (78 | GPIO_ALT_FN_1_OUT)
+#define GPIO79_nCS_3_MD         (79 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_pSKTSEL_MD       (79 | GPIO_ALT_FN_1_OUT)
+#define GPIO80_nCS_4_MD         (80 | GPIO_ALT_FN_2_OUT)
+#define GPIO81_NSSP_CLK_OUT     (81 | GPIO_ALT_FN_1_OUT)
+#define GPIO81_NSSP_CLK_IN      (81 | GPIO_ALT_FN_1_IN)
+#define GPIO81_CIF_DD_0_MD      (81 | GPIO_ALT_FN_2_IN)
+#define GPIO82_NSSP_FRM_OUT     (82 | GPIO_ALT_FN_1_OUT)
+#define GPIO82_NSSP_FRM_IN      (82 | GPIO_ALT_FN_1_IN)
+#define GPIO82_CIF_DD_5_MD      (82 | GPIO_ALT_FN_3_IN)
+#define GPIO83_NSSP_TX          (83 | GPIO_ALT_FN_1_OUT)
+#define GPIO83_NSSP_RX          (83 | GPIO_ALT_FN_2_IN)
+#define GPIO83_CIF_DD_4_MD      (83 | GPIO_ALT_FN_3_IN)
+#define GPIO84_NSSP_TX          (84 | GPIO_ALT_FN_1_OUT)
+#define GPIO84_NSSP_RX          (84 | GPIO_ALT_FN_2_IN)
+#define GPIO84_CIF_FV_MD        (84 | GPIO_ALT_FN_3_IN)
+#define GPIO85_nPCE_1_MD        (85 | GPIO_ALT_FN_1_OUT)
+#define GPIO85_CIF_LV_MD        (85 | GPIO_ALT_FN_3_IN)
+#define GPIO86_nPCE_1_MD        (86 | GPIO_ALT_FN_1_OUT)
+#define GPIO90_CIF_DD_4_MD      (90 | GPIO_ALT_FN_3_IN)
+#define GPIO91_CIF_DD_5_MD      (91 | GPIO_ALT_FN_3_IN)
+#define GPIO92_MMCDAT0_MD       (92 | GPIO_ALT_FN_1_OUT)
+#define GPIO93_CIF_DD_6_MD      (93 | GPIO_ALT_FN_2_IN)
+#define GPIO94_CIF_DD_5_MD      (94 | GPIO_ALT_FN_2_IN)
+#define GPIO95_CIF_DD_4_MD      (95 | GPIO_ALT_FN_2_IN)
+#define GPIO95_KP_MKIN6_MD      (95 | GPIO_ALT_FN_3_IN)
+#define GPIO96_KP_DKIN3_MD      (96 | GPIO_ALT_FN_1_IN)
+#define GPIO97_KP_MKIN3_MD      (97 | GPIO_ALT_FN_3_IN)
+#define GPIO98_CIF_DD_0_MD      (98 | GPIO_ALT_FN_2_IN)
+#define GPIO100_KP_MKIN0_MD     (100 | GPIO_ALT_FN_1_IN)
+#define GPIO101_KP_MKIN1_MD     (101 | GPIO_ALT_FN_1_IN)
+#define GPIO102_nPCE_1_MD       (102 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_KP_MKIN2_MD     (102 | GPIO_ALT_FN_1_IN)
+#define GPIO103_CIF_DD_3_MD     (103 | GPIO_ALT_FN_1_IN)
+#define GPIO103_KP_MKOUT0_MD    (103 | GPIO_ALT_FN_2_OUT)
+#define GPIO104_CIF_DD_2_MD     (104 | GPIO_ALT_FN_1_IN)
+#define GPIO104_pSKTSEL_MD      (104 | GPIO_ALT_FN_1_OUT)
+#define GPIO104_KP_MKOUT1_MD    (104 | GPIO_ALT_FN_2_OUT)
+#define GPIO105_CIF_DD_1_MD     (105 | GPIO_ALT_FN_1_IN)
+#define GPIO105_KP_MKOUT2_MD    (105 | GPIO_ALT_FN_2_OUT)
+#define GPIO106_CIF_DD_9_MD     (106 | GPIO_ALT_FN_1_IN)
+#define GPIO106_KP_MKOUT3_MD    (106 | GPIO_ALT_FN_2_OUT)
+#define GPIO107_CIF_DD_8_MD     (107 | GPIO_ALT_FN_1_IN)
+#define GPIO107_KP_MKOUT4_MD    (107 | GPIO_ALT_FN_2_OUT)
+#define GPIO108_CIF_DD_7_MD     (108 | GPIO_ALT_FN_1_IN)
+#define GPIO108_KP_MKOUT5_MD    (108 | GPIO_ALT_FN_2_OUT)
+#define GPIO109_MMCDAT1_MD      (109 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCDAT2_MD      (110 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS0_MD       (110 | GPIO_ALT_FN_1_OUT)
+#define GPIO111_MMCDAT3_MD      (111 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS1_MD       (111 | GPIO_ALT_FN_1_OUT)
+#define GPIO112_MMCCMD_MD       (112 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_I2S_SYSCLK_MD   (113 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT)
+#define GPIO117_I2CSCL_MD       (117 | GPIO_ALT_FN_1_IN)
+#define GPIO118_I2CSDA_MD       (118 | GPIO_ALT_FN_1_IN)
+
+#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h
index 8e1b3ead827f..fe9364c83a28 100644
--- a/include/asm-arm/arch-pxa/pxa3xx-regs.h
+++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h
@@ -12,6 +12,15 @@
 
 #ifndef __ASM_ARCH_PXA3XX_REGS_H
 #define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+
+#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
+
+
 /*
  * Service Power Management Unit (MPMU)
  */
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
index c05e4faf85a6..c5b6fde6907c 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/include/asm-arm/arch-pxa/tosa.h
@@ -23,11 +23,12 @@
 /*
  * SCOOP2 internal GPIOs
  */
+#define TOSA_SCOOP_GPIO_BASE            NR_BUILTIN_GPIO
 #define TOSA_SCOOP_PXA_VCORE1           SCOOP_GPCR_PA11
 #define TOSA_SCOOP_TC6393_REST_IN       SCOOP_GPCR_PA12
-#define TOSA_SCOOP_IR_POWERDWN          SCOOP_GPCR_PA13
-#define TOSA_SCOOP_SD_WP                SCOOP_GPCR_PA14
-#define TOSA_SCOOP_PWR_ON               SCOOP_GPCR_PA15
+#define TOSA_GPIO_IR_POWERDWN           (TOSA_SCOOP_GPIO_BASE + 2)
+#define TOSA_GPIO_SD_WP                 (TOSA_SCOOP_GPIO_BASE + 3)
+#define TOSA_GPIO_PWR_ON                (TOSA_SCOOP_GPIO_BASE + 4)
 #define TOSA_SCOOP_AUD_PWR_ON           SCOOP_GPCR_PA16
 #define TOSA_SCOOP_BT_RESET             SCOOP_GPCR_PA17
 #define TOSA_SCOOP_BT_PWR_EN            SCOOP_GPCR_PA18
@@ -35,7 +36,7 @@
 
 /* GPIO Direction   1 : output mode / 0:input mode */
 #define TOSA_SCOOP_IO_DIR     ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
-                TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\
+                TOSA_SCOOP_AUD_PWR_ON |\
                 TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
 /* GPIO out put level when init   1: Hi */
 #define TOSA_SCOOP_IO_OUT     ( TOSA_SCOOP_TC6393_REST_IN )
@@ -43,23 +44,21 @@
 /*
  * SCOOP2 jacket GPIOs
  */
-#define TOSA_SCOOP_JC_BT_LED            SCOOP_GPCR_PA11
-#define TOSA_SCOOP_JC_NOTE_LED          SCOOP_GPCR_PA12
-#define TOSA_SCOOP_JC_CHRG_ERR_LED      SCOOP_GPCR_PA13
-#define TOSA_SCOOP_JC_USB_PULLUP        SCOOP_GPCR_PA14
+#define TOSA_SCOOP_JC_GPIO_BASE         (NR_BUILTIN_GPIO + 12)
+#define TOSA_GPIO_BT_LED                (TOSA_SCOOP_JC_GPIO_BASE + 0)
+#define TOSA_GPIO_NOTE_LED              (TOSA_SCOOP_JC_GPIO_BASE + 1)
+#define TOSA_GPIO_CHRG_ERR_LED          (TOSA_SCOOP_JC_GPIO_BASE + 2)
+#define TOSA_GPIO_USB_PULLUP            (TOSA_SCOOP_JC_GPIO_BASE + 3)
 #define TOSA_SCOOP_JC_TC6393_SUSPEND    SCOOP_GPCR_PA15
 #define TOSA_SCOOP_JC_TC3693_L3V_ON     SCOOP_GPCR_PA16
 #define TOSA_SCOOP_JC_WLAN_DETECT       SCOOP_GPCR_PA17
-#define TOSA_SCOOP_JC_WLAN_LED          SCOOP_GPCR_PA18
+#define TOSA_GPIO_WLAN_LED              (TOSA_SCOOP_JC_GPIO_BASE + 7)
 #define TOSA_SCOOP_JC_CARD_LIMIT_SEL    SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \
-                TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \
+#define TOSA_SCOOP_JC_IO_DIR ( \
                 TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
-                TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL )
-/* GPIO out put level when init   1: Hi */
-#define TOSA_SCOOP_JC_IO_OUT ( 0 )
+                TOSA_SCOOP_JC_CARD_LIMIT_SEL )
 
 /*
  * Timing Generator
@@ -74,15 +73,6 @@
 #define TG_HPOSCTL                      0x07
 
 /*
- * LED
- */
-#define TOSA_SCOOP_LED_BLUE             TOSA_SCOOP_GPCR_PA11
-#define TOSA_SCOOP_LED_GREEN            TOSA_SCOOP_GPCR_PA12
-#define TOSA_SCOOP_LED_ORANGE           TOSA_SCOOP_GPCR_PA13
-#define TOSA_SCOOP_LED_WLAN             TOSA_SCOOP_GPCR_PA18
-
-
-/*
  * PXA GPIOs
  */
 #define TOSA_GPIO_POWERON               (0)
@@ -161,12 +151,8 @@
 
 #define TOSA_IRQ_GPIO_MAIN_BAT_LOW      IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
 
-extern struct platform_device tosascoop_jc_device;
-extern struct platform_device tosascoop_device;
-
 #define TOSA_KEY_SYNC           KEY_102ND /* ??? */
 
-
 #ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
 #define TOSA_KEY_RECORD         KEY_YEN
 #define TOSA_KEY_ADDRESSBOOK    KEY_KATAKANA
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h
index 5f717d64ea7d..4881b80f0f90 100644
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ b/include/asm-arm/arch-pxa/zylonite.h
@@ -18,6 +18,8 @@ extern struct platform_mmc_slot zylonite_mmc_slot[];
 extern int gpio_backlight;
 extern int gpio_eth_irq;
 
+extern int wm9713_irq;
+
 extern int lcd_id;
 extern int lcd_orientation;
 
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
index dba9df9d8713..ecae9e7f5e45 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -137,7 +137,7 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
 
 #define S3C2412_CLKDIVN_PDIVN           (1<<2)
 #define S3C2412_CLKDIVN_HDIVN_MASK      (3<<0)
-#define S3C2421_CLKDIVN_ARMDIVN         (1<<3)
+#define S3C2412_CLKDIVN_ARMDIVN         (1<<3)
 #define S3C2412_CLKDIVN_DVSEN           (1<<4)
 #define S3C2412_CLKDIVN_HALFHCLK        (1<<5)
 #define S3C2412_CLKDIVN_USB48DIV        (1<<6)
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 0ad75d716ded..497dd06e2c99 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -529,11 +529,13 @@
 #define S3C2410_GPD14_INP       (0x00 << 28)
 #define S3C2410_GPD14_OUTP      (0x01 << 28)
 #define S3C2410_GPD14_VD22      (0x02 << 28)
+#define S3C2410_GPD14_nSS1      (0x03 << 28)
 
 #define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
 #define S3C2410_GPD15_INP       (0x00 << 30)
 #define S3C2410_GPD15_OUTP      (0x01 << 30)
 #define S3C2410_GPD15_VD23      (0x02 << 30)
+#define S3C2410_GPD15_nSS0      (0x03 << 30)
 
 #define S3C2410_GPD_PUPDIS(x)  (1<<(x))
 
@@ -801,12 +803,14 @@
 #define S3C2410_GPG2_INP      (0x00 << 4)
 #define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
+#define S3C2410_GPG2_nSS0     (0x03 << 4)
 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
 #define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
 #define S3C2410_GPG3_INP      (0x00 << 6)
 #define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
+#define S3C2410_GPG3_nSS1     (0x03 << 6)
 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
new file mode 100644
index 000000000000..c8c793e78936
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2412_MEM
+#define __ASM_ARM_REGS_S3C2412_MEM
+
+#ifndef S3C2412_MEMREG
+#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2412_BANKCFG                 S3C2412_MEMREG(0x00)
+#define S3C2412_BANKCON1                S3C2412_MEMREG(0x04)
+#define S3C2412_BANKCON2                S3C2412_MEMREG(0x08)
+#define S3C2412_BANKCON3                S3C2412_MEMREG(0x0C)
+
+#define S3C2412_REFRESH                 S3C2412_MEMREG(0x10)
+#define S3C2412_TIMEOUT                 S3C2412_MEMREG(0x14)
+
+#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h
new file mode 100644
index 000000000000..1615bce0c026
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/system-reset.h
@@ -0,0 +1,64 @@
+/* linux/include/asm-arm/arch-s3c2410/system-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c/regs-watchdog.h>
+#include <asm/arch/regs-clock.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+
+extern void (*s3c24xx_reset_hook)(void);
+
+static void
+arch_reset(char mode)
+{
+        struct clk *wdtclk;
+
+        if (mode == 's') {
+                cpu_reset(0);
+        }
+
+        if (s3c24xx_reset_hook)
+                s3c24xx_reset_hook();
+
+        printk("arch_reset: attempting watchdog reset\n");
+
+        __raw_writel(0, S3C2410_WTCON);   /* disable watchdog, to be safe  */
+
+        wdtclk = clk_get(NULL, "watchdog");
+        if (!IS_ERR(wdtclk)) {
+                clk_enable(wdtclk);
+        } else
+                printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+        /* put initial values into count and data */
+        __raw_writel(0x80, S3C2410_WTCNT);
+        __raw_writel(0x80, S3C2410_WTDAT);
+
+        /* set the watchdog to go and reset... */
+        __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+                     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+        /* wait for reset to assert... */
+        mdelay(500);
+
+        printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+        /* delay to allow the serial port to show the message */
+        mdelay(50);
+
+        /* we'll take a jump through zero as a poor second */
+        cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index 14de4e596f87..ad258085e53b 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -17,12 +17,8 @@
 #include <asm/arch/idle.h>
 #include <asm/arch/reset.h>
 
-#include <asm/plat-s3c/regs-watchdog.h>
 #include <asm/arch/regs-clock.h>
 
-#include <linux/clk.h>
-#include <linux/err.h>
-
 void (*s3c24xx_idle)(void);
 void (*s3c24xx_reset_hook)(void);
 
@@ -59,44 +55,4 @@ static void arch_idle(void)
                 s3c24xx_default_idle();
 }
 
-static void
-arch_reset(char mode)
-{
-        struct clk *wdtclk;
-
-        if (mode == 's') {
-                cpu_reset(0);
-        }
-
-        if (s3c24xx_reset_hook)
-                s3c24xx_reset_hook();
-
-        printk("arch_reset: attempting watchdog reset\n");
-
-        __raw_writel(0, S3C2410_WTCON);   /* disable watchdog, to be safe  */
-
-        wdtclk = clk_get(NULL, "watchdog");
-        if (!IS_ERR(wdtclk)) {
-                clk_enable(wdtclk);
-        } else
-                printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-        /* put initial values into count and data */
-        __raw_writel(0x80, S3C2410_WTCNT);
-        __raw_writel(0x80, S3C2410_WTDAT);
-
-        /* set the watchdog to go and reset... */
-        __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-                     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-        /* wait for reset to assert... */
-        mdelay(500);
-
-        printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-        /* delay to allow the serial port to show the message */
-        mdelay(50);
-
-        /* we'll take a jump through zero as a poor second */
-        cpu_reset(0);
-}
+#include <asm/arch/system-reset.h>
diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h
index e7a9d26e22a8..93d3395b102d 100644
--- a/include/asm-arm/arch-sa1100/gpio.h
+++ b/include/asm-arm/arch-sa1100/gpio.h
@@ -26,35 +26,28 @@
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-        return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-        return;
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
+#include <asm-generic/gpio.h>
 
 static inline int gpio_get_value(unsigned gpio)
 {
-        return GPLR & GPIO_GPIO(gpio);
+        if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+                return GPLR & GPIO_GPIO(gpio);
+        else
+                return __gpio_get_value(gpio);
 }
 
 static inline void gpio_set_value(unsigned gpio, int value)
 {
-        if (value)
-                GPSR = GPIO_GPIO(gpio);
+        if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+                if (value)
+                        GPSR = GPIO_GPIO(gpio);
+                else
+                        GPCR = GPIO_GPIO(gpio);
         else
-                GPCR = GPIO_GPIO(gpio);
+                __gpio_set_value(gpio, value);
 }
 
-#include <asm-generic/gpio.h>                   /* cansleep wrappers */
+#define gpio_cansleep   __gpio_cansleep
 
 static inline unsigned gpio_to_irq(unsigned gpio)
 {
diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h
index ede377ec9147..18f6937f5010 100644
--- a/include/asm-arm/hardware/iop3xx.h
+++ b/include/asm-arm/hardware/iop3xx.h
@@ -29,6 +29,7 @@ extern void gpio_line_config(int line, int direction);
 extern int  gpio_line_get(int line);
 extern void gpio_line_set(int line, int value);
 extern int init_atu;
+extern int iop3xx_get_init_atu(void);
 #endif
 
 
@@ -112,14 +113,6 @@ extern int init_atu;
 #define IOP3XX_INIT_ATU_DISABLE -1
 #define IOP3XX_INIT_ATU_ENABLE   1
 
-#ifdef CONFIG_IOP3XX_ATU
-#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\
-                                IOP3XX_INIT_ATU_ENABLE : init_atu)
-#else
-#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\
-                                IOP3XX_INIT_ATU_DISABLE : init_atu)
-#endif
-
 /* Messaging Unit  */
 #define IOP3XX_IMR0             (volatile u32 *)IOP3XX_REG_ADDR(0x0310)
 #define IOP3XX_IMR1             (volatile u32 *)IOP3XX_REG_ADDR(0x0314)
diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h
index d37bf7443264..dfb8330599f9 100644
--- a/include/asm-arm/hardware/scoop.h
+++ b/include/asm-arm/hardware/scoop.h
@@ -40,6 +40,7 @@ struct scoop_config {
         unsigned short io_dir;
         unsigned short suspend_clr;
         unsigned short suspend_set;
+        int gpio_base;
 };
 
 /* Structure for linking scoop devices to PCMCIA sockets */
@@ -62,7 +63,7 @@ struct scoop_pcmcia_config {
 extern struct scoop_pcmcia_config *platform_scoop_config;
 
 void reset_scoop(struct device *dev);
-unsigned short set_scoop_gpio(struct device *dev, unsigned short bit);
-unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit);
+unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit);
+unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit);
 unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
 void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h
index 24621c49a0c7..9d4f6b5ea419 100644
--- a/include/asm-arm/mach/pci.h
+++ b/include/asm-arm/mach/pci.h
@@ -55,6 +55,7 @@ void pci_common_init(struct hw_pci *);
 extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
 extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
 extern void iop3xx_pci_preinit(void);
+extern void iop3xx_pci_preinit_cond(void);
 
 extern int dc21285_setup(int nr, struct pci_sys_data *);
 extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
index d9bfb39adabf..9ba4d7136e6b 100644
--- a/include/asm-arm/memory.h
+++ b/include/asm-arm/memory.h
@@ -217,7 +217,10 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #ifndef CONFIG_DISCONTIGMEM
 
 #define ARCH_PFN_OFFSET         PHYS_PFN_OFFSET
+
+#ifndef CONFIG_SPARSEMEM
 #define pfn_valid(pfn)          ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+#endif
 
 #define virt_to_page(kaddr)     pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)  ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
diff --git a/include/asm-arm/plat-orion/ehci-orion.h b/include/asm-arm/plat-orion/ehci-orion.h
new file mode 100644
index 000000000000..785705651e24
--- /dev/null
+++ b/include/asm-arm/plat-orion/ehci-orion.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-arm/plat-orion/ehci-orion.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_PLAT_ORION_EHCI_ORION_H
+#define __ASM_PLAT_ORION_EHCI_ORION_H
+
+#include <linux/mbus.h>
+
+struct orion_ehci_data {
+        struct mbus_dram_target_info    *dram;
+};
+
+
+#endif
diff --git a/include/asm-arm/plat-orion/irq.h b/include/asm-arm/plat-orion/irq.h
new file mode 100644
index 000000000000..94aeed919d5b
--- /dev/null
+++ b/include/asm-arm/plat-orion/irq.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-arm/plat-orion/irq.h
+ *
+ * Marvell Orion SoC IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_PLAT_ORION_IRQ_H
+#define __ASM_PLAT_ORION_IRQ_H
+
+void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
+
+
+#endif
diff --git a/include/asm-arm/arch-orion/platform.h b/include/asm-arm/plat-orion/orion_nand.h
index 143c38e2fa0b..ffd3852a0dd7 100644
--- a/include/asm-arm/arch-orion/platform.h
+++ b/include/asm-arm/plat-orion/orion_nand.h
@@ -1,15 +1,13 @@
 /*
- * asm-arm/arch-orion/platform.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
+ * include/asm-arm/plat-orion/orion_nand.h
  *
  * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
+#ifndef __ASM_PLAT_ORION_ORION_NAND_H
+#define __ASM_PLAT_ORION_ORION_NAND_H
 
 /*
  * Device bus NAND private data
@@ -22,4 +20,5 @@ struct orion_nand_data {
         u8 width;       /* buswidth */
 };
 
+
 #endif
diff --git a/include/asm-arm/plat-orion/pcie.h b/include/asm-arm/plat-orion/pcie.h
new file mode 100644
index 000000000000..6434ac685d21
--- /dev/null
+++ b/include/asm-arm/plat-orion/pcie.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-arm/plat-orion/pcie.h
+ *
+ * Marvell Orion SoC PCIe handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_PLAT_ORION_PCIE_H
+#define __ASM_PLAT_ORION_PCIE_H
+
+u32 orion_pcie_dev_id(void __iomem *base);
+u32 orion_pcie_rev(void __iomem *base);
+int orion_pcie_link_up(void __iomem *base);
+int orion_pcie_get_local_bus_nr(void __iomem *base);
+void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_setup(void __iomem *base,
+                      struct mbus_dram_target_info *dram);
+int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
+                       u32 devfn, int where, int size, u32 *val);
+int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus,
+                           u32 devfn, int where, int size, u32 *val);
+int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus,
+                          u32 devfn, int where, int size, u32 *val);
+int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus,
+                       u32 devfn, int where, int size, u32 val);
+
+
+#endif
diff --git a/include/asm-arm/plat-orion/time.h b/include/asm-arm/plat-orion/time.h
new file mode 100644
index 000000000000..0e85cc8f44d9
--- /dev/null
+++ b/include/asm-arm/plat-orion/time.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-arm/plat-orion/time.h
+ *
+ * Marvell Orion SoC time handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_PLAT_ORION_TIME_H
+#define __ASM_PLAT_ORION_TIME_H
+
+void orion_time_init(unsigned int irq, unsigned int tclk);
+
+
+#endif
diff --git a/include/asm-arm/sparsemem.h b/include/asm-arm/sparsemem.h
new file mode 100644
index 000000000000..277158191a0d
--- /dev/null
+++ b/include/asm-arm/sparsemem.h
@@ -0,0 +1,10 @@
+#ifndef ASMARM_SPARSEMEM_H
+#define ASMARM_SPARSEMEM_H
+
+#include <asm/memory.h>
+
+#define MAX_PHYSADDR_BITS       32
+#define MAX_PHYSMEM_BITS        32
+#define SECTION_SIZE_BITS       NODE_MEM_SIZE_BITS
+
+#endif
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
index 88e868b7aae0..7c570082b1e0 100644
--- a/include/asm-arm/unistd.h
+++ b/include/asm-arm/unistd.h
@@ -376,9 +376,11 @@
 #define __NR_kexec_load                 (__NR_SYSCALL_BASE+347)
 #define __NR_utimensat                  (__NR_SYSCALL_BASE+348)
 #define __NR_signalfd                   (__NR_SYSCALL_BASE+349)
-#define __NR_timerfd                    (__NR_SYSCALL_BASE+350)
+#define __NR_timerfd_create             (__NR_SYSCALL_BASE+350)
 #define __NR_eventfd                    (__NR_SYSCALL_BASE+351)
 #define __NR_fallocate                  (__NR_SYSCALL_BASE+352)
+#define __NR_timerfd_settime            (__NR_SYSCALL_BASE+353)
+#define __NR_timerfd_gettime            (__NR_SYSCALL_BASE+354)
 
 /*
  * The following SWIs are ARM private.