30 files changed, 352 insertions, 279 deletions

diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h
new file mode 100644
index 000000000000..1ed66eaaf83a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-arm/arch-at91/at91_adc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Analog-to-Digital Converter (ADC) registers.
+ * Based on AT91SAM9260 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ADC_H
+#define AT91_ADC_H
+
+#define AT91_ADC_CR             0x00            /* Control Register */
+#define         AT91_ADC_SWRST          (1 << 0)        /* Software Reset */
+#define         AT91_ADC_START          (1 << 1)        /* Start Conversion */
+
+#define AT91_ADC_MR             0x04            /* Mode Register */
+#define         AT91_ADC_TRGEN          (1 << 0)        /* Trigger Enable */
+#define         AT91_ADC_TRGSEL         (7 << 1)        /* Trigger Selection */
+#define                 AT91_ADC_TRGSEL_TC0             (0 << 1)
+#define                 AT91_ADC_TRGSEL_TC1             (1 << 1)
+#define                 AT91_ADC_TRGSEL_TC2             (2 << 1)
+#define                 AT91_ADC_TRGSEL_EXTERNAL        (6 << 1)
+#define         AT91_ADC_LOWRES         (1 << 4)        /* Low Resolution */
+#define         AT91_ADC_SLEEP          (1 << 5)        /* Sleep Mode */
+#define         AT91_ADC_PRESCAL        (0x3f << 8)     /* Prescalar Rate Selection */
+#define                 AT91_ADC_PRESCAL_(x)    ((x) << 8)
+#define         AT91_ADC_STARTUP        (0x1f << 16)    /* Startup Up Time */
+#define                 AT91_ADC_STARTUP_(x)    ((x) << 16)
+#define         AT91_ADC_SHTIM          (0xf  << 24)    /* Sample & Hold Time */
+#define                 AT91_ADC_SHTIM_(x)      ((x) << 24)
+
+#define AT91_ADC_CHER           0x10            /* Channel Enable Register */
+#define AT91_ADC_CHDR           0x14            /* Channel Disable Register */
+#define AT91_ADC_CHSR           0x18            /* Channel Status Register */
+#define         AT91_ADC_CH(n)          (1 << (n))      /* Channel Number */
+
+#define AT91_ADC_SR             0x1C            /* Status Register */
+#define         AT91_ADC_EOC(n)         (1 << (n))      /* End of Conversion on Channel N */
+#define         AT91_ADC_OVRE(n)        (1 << ((n) + 8))/* Overrun Error on Channel N */
+#define         AT91_ADC_DRDY           (1 << 16)       /* Data Ready */
+#define         AT91_ADC_GOVRE          (1 << 17)       /* General Overrun Error */
+#define         AT91_ADC_ENDRX          (1 << 18)       /* End of RX Buffer */
+#define         AT91_ADC_RXFUFF         (1 << 19)       /* RX Buffer Full */
+
+#define AT91_ADC_LCDR           0x20            /* Last Converted Data Register */
+#define         AT91_ADC_LDATA          (0x3ff)
+
+#define AT91_ADC_IER            0x24            /* Interrupt Enable Register */
+#define AT91_ADC_IDR            0x28            /* Interrupt Disable Register */
+#define AT91_ADC_IMR            0x2C            /* Interrupt Mask Register */
+
+#define AT91_ADC_CHR(n)         (0x30 + ((n) * 4)       /* Channel Data Register N */
+#define         AT91_ADC_DATA           (0x3ff)
+
+#endif
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index 7b9903c2c447..7a34a5b1fed0 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -62,7 +62,7 @@ struct at91_mmc_data {
 };
 extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
- /* Ethernet */
+ /* Ethernet (EMAC & MACB) */
 struct at91_eth_data {
         u8              phy_irq_pin;    /* PHY IRQ */
         u8              is_rmii;        /* using RMII interface? */
@@ -114,6 +114,16 @@ struct atmel_uart_data {
 };
 extern void __init at91_add_device_serial(void);
 
+ /* LCD Controller */
+struct atmel_lcdfb_info;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+
+ /* AC97 */
+struct atmel_ac97_data {
+        u8              reset_pin;      /* reset */
+}
+extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+
  /* LEDs */
 extern u8 at91_leds_cpu;
 extern u8 at91_leds_timer;
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
index e56a4e247d62..de6494a4dc6b 100644
--- a/include/asm-arm/arch-imx/imx-regs.h
+++ b/include/asm-arm/arch-imx/imx-regs.h
@@ -477,122 +477,4 @@
 #define LCDISR_EOF     (1<<1)
 #define LCDISR_BOF     (1<<0)
 
-/*
- *  UART Module. Takes the UART base address as argument
- */
-#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */
-#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */
-#define UCR1(x)  __REG( 0x80 + (x)) /* Control Register 1 */
-#define UCR2(x)  __REG( 0x84 + (x)) /* Control Register 2 */
-#define UCR3(x)  __REG( 0x88 + (x)) /* Control Register 3 */
-#define UCR4(x)  __REG( 0x8c + (x)) /* Control Register 4 */
-#define UFCR(x)  __REG( 0x90 + (x)) /* FIFO Control Register */
-#define USR1(x)  __REG( 0x94 + (x)) /* Status Register 1 */
-#define USR2(x)  __REG( 0x98 + (x)) /* Status Register 2 */
-#define UESC(x)  __REG( 0x9c + (x)) /* Escape Character Register */
-#define UTIM(x)  __REG( 0xa0 + (x)) /* Escape Timer Register */
-#define UBIR(x)  __REG( 0xa4 + (x)) /* BRM Incremental Register */
-#define UBMR(x)  __REG( 0xa8 + (x)) /* BRM Modulator Register */
-#define UBRC(x)  __REG( 0xac + (x)) /* Baud Rate Count Register */
-#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */
-#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */
-#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */
-#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */
-#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */
-#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */
-#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */
-#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */
-#define UTS(x)   __REG( 0xd0 + (x)) /* UART Test Register */
-
-/* UART Control Register Bit Fields.*/
-#define  URXD_CHARRDY    (1<<15)
-#define  URXD_ERR        (1<<14)
-#define  URXD_OVRRUN     (1<<13)
-#define  URXD_FRMERR     (1<<12)
-#define  URXD_BRK        (1<<11)
-#define  URXD_PRERR      (1<<10)
-#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
-#define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
-#define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
-#define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
-#define  UCR1_RRDYEN     (1<<9)  /* Recv ready interrupt enable */
-#define  UCR1_RDMAEN     (1<<8)  /* Recv ready DMA enable */
-#define  UCR1_IREN       (1<<7)  /* Infrared interface enable */
-#define  UCR1_TXMPTYEN   (1<<6)  /* Transimitter empty interrupt enable */
-#define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
-#define  UCR1_SNDBRK     (1<<4)  /* Send break */
-#define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
-#define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
-#define  UCR1_DOZE       (1<<1)  /* Doze */
-#define  UCR1_UARTEN     (1<<0)  /* UART enabled */
-#define  UCR2_ESCI       (1<<15) /* Escape seq interrupt enable */
-#define  UCR2_IRTS       (1<<14) /* Ignore RTS pin */
-#define  UCR2_CTSC       (1<<13) /* CTS pin control */
-#define  UCR2_CTS        (1<<12) /* Clear to send */
-#define  UCR2_ESCEN      (1<<11) /* Escape enable */
-#define  UCR2_PREN       (1<<8)  /* Parity enable */
-#define  UCR2_PROE       (1<<7)  /* Parity odd/even */
-#define  UCR2_STPB       (1<<6)  /* Stop */
-#define  UCR2_WS         (1<<5)  /* Word size */
-#define  UCR2_RTSEN      (1<<4)  /* Request to send interrupt enable */
-#define  UCR2_TXEN       (1<<2)  /* Transmitter enabled */
-#define  UCR2_RXEN       (1<<1)  /* Receiver enabled */
-#define  UCR2_SRST       (1<<0)  /* SW reset */
-#define  UCR3_DTREN      (1<<13) /* DTR interrupt enable */
-#define  UCR3_PARERREN   (1<<12) /* Parity enable */
-#define  UCR3_FRAERREN   (1<<11) /* Frame error interrupt enable */
-#define  UCR3_DSR        (1<<10) /* Data set ready */
-#define  UCR3_DCD        (1<<9)  /* Data carrier detect */
-#define  UCR3_RI         (1<<8)  /* Ring indicator */
-#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
-#define  UCR3_RXDSEN     (1<<6)  /* Receive status interrupt enable */
-#define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
-#define  UCR3_AWAKEN     (1<<4)  /* Async wake interrupt enable */
-#define  UCR3_REF25      (1<<3)  /* Ref freq 25 MHz */
-#define  UCR3_REF30      (1<<2)  /* Ref Freq 30 MHz */
-#define  UCR3_INVT       (1<<1)  /* Inverted Infrared transmission */
-#define  UCR3_BPEN       (1<<0)  /* Preset registers enable */
-#define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
-#define  UCR4_INVR       (1<<9)  /* Inverted infrared reception */
-#define  UCR4_ENIRI      (1<<8)  /* Serial infrared interrupt enable */
-#define  UCR4_WKEN       (1<<7)  /* Wake interrupt enable */
-#define  UCR4_REF16      (1<<6)  /* Ref freq 16 MHz */
-#define  UCR4_IRSC       (1<<5)  /* IR special case */
-#define  UCR4_TCEN       (1<<3)  /* Transmit complete interrupt enable */
-#define  UCR4_BKEN       (1<<2)  /* Break condition interrupt enable */
-#define  UCR4_OREN       (1<<1)  /* Receiver overrun interrupt enable */
-#define  UCR4_DREN       (1<<0)  /* Recv data ready interrupt enable */
-#define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
-#define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
-#define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
-#define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
-#define  USR1_RTSS       (1<<14) /* RTS pin status */
-#define  USR1_TRDY       (1<<13) /* Transmitter ready interrupt/dma flag */
-#define  USR1_RTSD       (1<<12) /* RTS delta */
-#define  USR1_ESCF       (1<<11) /* Escape seq interrupt flag */
-#define  USR1_FRAMERR    (1<<10) /* Frame error interrupt flag */
-#define  USR1_RRDY       (1<<9)  /* Receiver ready interrupt/dma flag */
-#define  USR1_TIMEOUT    (1<<7)  /* Receive timeout interrupt status */
-#define  USR1_RXDS       (1<<6)  /* Receiver idle interrupt flag */
-#define  USR1_AIRINT     (1<<5)  /* Async IR wake interrupt flag */
-#define  USR1_AWAKE      (1<<4)  /* Aysnc wake interrupt flag */
-#define  USR2_ADET       (1<<15) /* Auto baud rate detect complete */
-#define  USR2_TXFE       (1<<14) /* Transmit buffer FIFO empty */
-#define  USR2_DTRF       (1<<13) /* DTR edge interrupt flag */
-#define  USR2_IDLE       (1<<12) /* Idle condition */
-#define  USR2_IRINT      (1<<8)  /* Serial infrared interrupt flag */
-#define  USR2_WAKE       (1<<7)  /* Wake */
-#define  USR2_RTSF       (1<<4)  /* RTS edge interrupt flag */
-#define  USR2_TXDC       (1<<3)  /* Transmitter complete */
-#define  USR2_BRCD       (1<<2)  /* Break condition */
-#define  USR2_ORE        (1<<1)  /* Overrun error */
-#define  USR2_RDR        (1<<0)  /* Recv data ready */
-#define  UTS_FRCPERR     (1<<13) /* Force parity error */
-#define  UTS_LOOP        (1<<12) /* Loop tx and rx */
-#define  UTS_TXEMPTY     (1<<6)  /* TxFIFO empty */
-#define  UTS_RXEMPTY     (1<<5)  /* RxFIFO empty */
-#define  UTS_TXFULL      (1<<4)  /* TxFIFO full */
-#define  UTS_RXFULL      (1<<3)  /* RxFIFO full */
-#define  UTS_SOFTRST     (1<<0)  /* Software reset */
-
 #endif                          // _IMX_REGS_H
diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h
index 5a7bdb526606..7dfff4ad82b3 100644
--- a/include/asm-arm/arch-iop13xx/io.h
+++ b/include/asm-arm/arch-iop13xx/io.h
@@ -26,7 +26,6 @@
 #define __mem_isa(a) (a)
 
 extern void __iomem * __iop13xx_io(unsigned long io_addr);
-extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
 extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
         unsigned long flags);
 extern void __iop13xx_iounmap(void __iomem *addr);
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h
index d26b755a9879..85707e9c3325 100644
--- a/include/asm-arm/arch-iop13xx/iop13xx.h
+++ b/include/asm-arm/arch-iop13xx/iop13xx.h
@@ -8,6 +8,7 @@ extern u32 iop13xx_atue_pmmr_offset;
 void iop13xx_init_irq(void);
 void iop13xx_map_io(void);
 void iop13xx_platform_init(void);
+void iop13xx_add_tpmi_devices(void);
 void iop13xx_init_irq(void);
 
 /* CPUID CP6 R0 Page 0 */
@@ -27,19 +28,24 @@ static inline int iop13xx_cpu_id(void)
 #define IOP13XX_PCI_OFFSET       IOP13XX_MAX_RAM_SIZE
 
 /* PCI MAP
- * 0x0000.0000 - 0x8000.0000           1:1 mapping with Physical RAM
- * 0x8000.0000 - 0x8800.0000           PCIX/PCIE memory window (128MB)
-*/
+ * bus range            cpu phys        cpu virt        note
+ * 0x0000.0000 + 2GB    (n/a)           (n/a)           inbound, 1:1 mapping with Physical RAM
+ * 0x8000.0000 + 928M   0x1.8000.0000   (ioremap)       PCIX outbound memory window
+ * 0x8000.0000 + 928M   0x2.8000.0000   (ioremap)       PCIE outbound memory window
+ *
+ * IO MAP
+ * 0x1000 + 64K 0x0.fffb.1000   0xfec6.1000     PCIX outbound i/o window
+ * 0x1000 + 64K 0x0.fffd.1000   0xfed7.1000     PCIE outbound i/o window
+ */
 #define IOP13XX_PCIX_IO_WINDOW_SIZE   0x10000UL
 #define IOP13XX_PCIX_LOWER_IO_PA      0xfffb0000UL
 #define IOP13XX_PCIX_LOWER_IO_VA      0xfec60000UL
-#define IOP13XX_PCIX_LOWER_IO_BA      0x0fff0000UL
+#define IOP13XX_PCIX_LOWER_IO_BA      0x0UL /* OIOTVR */
+#define IOP13XX_PCIX_IO_BUS_OFFSET    0x1000UL
 #define IOP13XX_PCIX_UPPER_IO_PA      (IOP13XX_PCIX_LOWER_IO_PA +\
                                        IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
 #define IOP13XX_PCIX_UPPER_IO_VA      (IOP13XX_PCIX_LOWER_IO_VA +\
                                        IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_IO_OFFSET        (IOP13XX_PCIX_LOWER_IO_VA -\
-                                       IOP13XX_PCIX_LOWER_IO_BA)
 #define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
                                            (IOP13XX_PCIX_LOWER_IO_PA\
                                            - IOP13XX_PCIX_LOWER_IO_VA))
@@ -65,15 +71,14 @@ static inline int iop13xx_cpu_id(void)
 #define IOP13XX_PCIE_IO_WINDOW_SIZE      0x10000UL
 #define IOP13XX_PCIE_LOWER_IO_PA         0xfffd0000UL
 #define IOP13XX_PCIE_LOWER_IO_VA         0xfed70000UL
-#define IOP13XX_PCIE_LOWER_IO_BA         0x0fff0000UL
+#define IOP13XX_PCIE_LOWER_IO_BA         0x0UL  /* OIOTVR */
+#define IOP13XX_PCIE_IO_BUS_OFFSET       0x1000UL
 #define IOP13XX_PCIE_UPPER_IO_PA         (IOP13XX_PCIE_LOWER_IO_PA +\
                                          IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
 #define IOP13XX_PCIE_UPPER_IO_VA         (IOP13XX_PCIE_LOWER_IO_VA +\
                                          IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
 #define IOP13XX_PCIE_UPPER_IO_BA         (IOP13XX_PCIE_LOWER_IO_BA +\
                                          IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_IO_OFFSET           (IOP13XX_PCIE_LOWER_IO_VA -\
-                                         IOP13XX_PCIE_LOWER_IO_BA)
 #define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
                                            (IOP13XX_PCIE_LOWER_IO_PA\
                                            - IOP13XX_PCIE_LOWER_IO_VA))
@@ -451,4 +456,5 @@ static inline int iop13xx_cpu_id(void)
 #define IOP13XX_PBI_BAR1                IOP13XX_PBI_OFFSET(0x10)
 #define IOP13XX_PBI_LR1                 IOP13XX_PBI_OFFSET(0x14)
 
+#define IOP13XX_PROCESSOR_FREQ          IOP13XX_REG_ADDR32(0x2180)
 #endif /* _IOP13XX_HW_H_ */
diff --git a/include/asm-arm/arch-iop13xx/time.h b/include/asm-arm/arch-iop13xx/time.h
index 77a837a02dec..49213d9d7cad 100644
--- a/include/asm-arm/arch-iop13xx/time.h
+++ b/include/asm-arm/arch-iop13xx/time.h
@@ -7,9 +7,65 @@
 #define IOP_TMR_PRIVILEGED 0x08
 #define IOP_TMR_RATIO_1_1  0x00
 
+#define IOP13XX_XSI_FREQ_RATIO_MASK     (3 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_2        (0 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_3        (1 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_4        (2 << 19)
+#define IOP13XX_CORE_FREQ_MASK          (7 << 16)
+#define IOP13XX_CORE_FREQ_600           (0 << 16)
+#define IOP13XX_CORE_FREQ_667           (1 << 16)
+#define IOP13XX_CORE_FREQ_800           (2 << 16)
+#define IOP13XX_CORE_FREQ_933           (3 << 16)
+#define IOP13XX_CORE_FREQ_1000          (4 << 16)
+#define IOP13XX_CORE_FREQ_1200          (5 << 16)
+
 void iop_init_time(unsigned long tickrate);
 unsigned long iop_gettimeoffset(void);
 
+static inline unsigned long iop13xx_core_freq(void)
+{
+        unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ);
+        freq &= IOP13XX_CORE_FREQ_MASK;
+        switch (freq) {
+        case IOP13XX_CORE_FREQ_600:
+                return 600000000;
+        case IOP13XX_CORE_FREQ_667:
+                return 667000000;
+        case IOP13XX_CORE_FREQ_800:
+                return 800000000;
+        case IOP13XX_CORE_FREQ_933:
+                return 933000000;
+        case IOP13XX_CORE_FREQ_1000:
+                return 1000000000;
+        case IOP13XX_CORE_FREQ_1200:
+                return 1200000000;
+        default:
+                printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
+                        __FUNCTION__);
+        }
+
+        return 800000000;
+}
+
+static inline unsigned long iop13xx_xsi_bus_ratio(void)
+{
+        unsigned long  ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ);
+        ratio &= IOP13XX_XSI_FREQ_RATIO_MASK;
+        switch (ratio) {
+        case IOP13XX_XSI_FREQ_RATIO_2:
+                return 2;
+        case IOP13XX_XSI_FREQ_RATIO_3:
+                return 3;
+        case IOP13XX_XSI_FREQ_RATIO_4:
+                return 4;
+        default:
+                printk("%s: warning unknown ratio, defaulting to 2\n",
+                        __FUNCTION__);
+        }
+
+        return 2;
+}
+
 static inline void write_tmr0(u32 val)
 {
         asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h
index 5f570a598a37..994f16af5057 100644
--- a/include/asm-arm/arch-iop32x/io.h
+++ b/include/asm-arm/arch-iop32x/io.h
@@ -13,7 +13,6 @@
 
 #include <asm/hardware.h>
 
-extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
 extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
         unsigned long flags);
 extern void __iop3xx_iounmap(void __iomem *addr);
diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h
index 2e9469047eb1..0d8af57221a1 100644
--- a/include/asm-arm/arch-iop32x/iop32x.h
+++ b/include/asm-arm/arch-iop32x/iop32x.h
@@ -24,5 +24,14 @@
 
 #include <asm/hardware/iop3xx.h>
 
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ physical ram on top of pci in the memory map
+ */
+#define IOP32X_MAX_RAM_SIZE            0x40000000UL
+#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
+#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
 
 #endif
diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h
index 764cd3f0d416..c51072af214e 100644
--- a/include/asm-arm/arch-iop32x/memory.h
+++ b/include/asm-arm/arch-iop32x/memory.h
@@ -19,8 +19,8 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *              to an address that the kernel can use.
  */
-#define __virt_to_bus(x)        (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0))
-#define __bus_to_virt(x)        (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2)))
+#define __virt_to_bus(x)        (__virt_to_phys(x))
+#define __bus_to_virt(x)        (__phys_to_virt(x))
 
 
 #endif
diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h
index 1bb5071e1fa8..993f7589b29f 100644
--- a/include/asm-arm/arch-iop33x/io.h
+++ b/include/asm-arm/arch-iop33x/io.h
@@ -13,7 +13,6 @@
 
 #include <asm/hardware.h>
 
-extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
 extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
         unsigned long flags);
 extern void __iop3xx_iounmap(void __iomem *addr);
diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h
index 7ac6e93db5ff..766985b9a723 100644
--- a/include/asm-arm/arch-iop33x/iop33x.h
+++ b/include/asm-arm/arch-iop33x/iop33x.h
@@ -29,5 +29,15 @@
 #define IOP33X_UART1_PHYS       (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
 #define IOP33X_UART1_VIRT       (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
 
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ pci on top of physical ram in memory map
+ */
+#define IOP33X_MAX_RAM_SIZE             0x80000000UL
+#define IOP3XX_MAX_RAM_SIZE             IOP33X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
+#define IOP33X_PCI_MEM_WINDOW_SIZE      0x08000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE      IOP33X_PCI_MEM_WINDOW_SIZE
+
 
 #endif
diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h
index 0d39139b241e..c8749127d6ab 100644
--- a/include/asm-arm/arch-iop33x/memory.h
+++ b/include/asm-arm/arch-iop33x/memory.h
@@ -19,8 +19,8 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *              to an address that the kernel can use.
  */
-#define __virt_to_bus(x)        (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0))
-#define __bus_to_virt(x)        (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2)))
+#define __virt_to_bus(x)        (__virt_to_phys(x))
+#define __bus_to_virt(x)        (__phys_to_virt(x))
 
 
 #endif
diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h
index 18415a81ac74..66f5bafc315c 100644
--- a/include/asm-arm/arch-ixp23xx/io.h
+++ b/include/asm-arm/arch-ixp23xx/io.h
@@ -23,7 +23,7 @@
 #include <linux/kernel.h>       /* For BUG */
 
 static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned long flags)
+ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
 {
         if (addr >= IXP23XX_PCI_MEM_START &&
                 addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
@@ -34,7 +34,7 @@ ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned long flags)
                         ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
         }
 
-        return __ioremap(addr, size, flags);
+        return __arm_ioremap(addr, size, mtype);
 }
 
 static inline void
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
index a41ba229c564..b27c910adf9d 100644
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ b/include/asm-arm/arch-ixp4xx/io.h
@@ -59,10 +59,10 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
  * fallback to the default.
  */
 static inline void __iomem *
-__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned long flags)
+__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
 {
         if((addr < 0x48000000) || (addr > 0x4fffffff))
-                return __ioremap(addr, size, flags);
+                return __arm_ioremap(addr, size, mtype);
 
         return (void *)addr;
 }
diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h
index 8ab45bea83ca..fc9aa21f360c 100644
--- a/include/asm-arm/arch-netx/netx-regs.h
+++ b/include/asm-arm/arch-netx/netx-regs.h
@@ -121,8 +121,8 @@
 #define NETX_SYSTEM_IOC_MR          NETX_SYSTEM_REG(0x08)
 
 /* FIXME: Docs are not consistent */
-#define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x08)
-/* #define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x0c) */
+/* #define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x08) */
+#define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x0c)
 
 #define NETX_SYSTEM_PHY_CONTROL     NETX_SYSTEM_REG(0x10)
 #define NETX_SYSTEM_REV             NETX_SYSTEM_REG(0x34)
diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h
index 91dc8fb1027f..716f34fdb716 100644
--- a/include/asm-arm/arch-ns9xxx/board.h
+++ b/include/asm-arm/arch-ns9xxx/board.h
@@ -15,4 +15,6 @@
 
 #define board_is_a9m9750dev()   (machine_is_cc9p9360dev())
 
+#define board_is_jscc9p9360()   (machine_is_cc9p9360js())
+
 #endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/include/asm-arm/arch-ns9xxx/clock.h b/include/asm-arm/arch-ns9xxx/clock.h
index a7c5ab3d9011..bf30cbdcc2bf 100644
--- a/include/asm-arm/arch-ns9xxx/clock.h
+++ b/include/asm-arm/arch-ns9xxx/clock.h
@@ -11,13 +11,43 @@
 #ifndef __ASM_ARCH_CLOCK_H
 #define __ASM_ARCH_CLOCK_H
 
+#include <asm/arch-ns9xxx/regs-sys.h>
+
+#define CRYSTAL 29491200 /* Hz */
+
+/* The HRM calls this value f_vco */
 static inline u32 ns9xxx_systemclock(void) __attribute__((const));
 static inline u32 ns9xxx_systemclock(void)
 {
+        u32 pll = SYS_PLL;
+
         /*
-         * This should be a multiple of HZ * TIMERCLOCKSELECT (in time.c)
+         * The system clock should be a multiple of HZ * TIMERCLOCKSELECT (in
+         * time.c).
+         *
+         * The following values are given:
+         *   - TIMERCLOCKSELECT == 2^i for an i in {0 .. 6}
+         *   - CRYSTAL == 29491200 == 2^17 * 3^2 * 5^2
+         *   - ND in {0 .. 31}
+         *   - FS in {0 .. 3}
+         *
+         * Assuming the worst, we consider:
+         *   - TIMERCLOCKSELECT == 64
+         *   - ND == 0
+         *   - FS == 3
+         *
+         * So HZ should be a divisor of:
+         *      (CRYSTAL * (ND + 1) >> FS) / TIMERCLOCKSELECT
+         *   == (2^17 * 3^2 * 5^2 * 1 >> 3) / 64
+         *   == 2^8 * 3^2 * 5^2
+         *   == 57600
+         *
+         * Currently HZ is defined to be 100 for this platform.
+         *
+         * Fine.
          */
-        return 353894400;
+        return CRYSTAL * (REGGET(pll, SYS_PLL, ND) + 1)
+                >> REGGET(pll, SYS_PLL, FS);
 }
 
 static inline u32 ns9xxx_cpuclock(void) __attribute__((const));
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h
index 6819da7c48d4..25600554c4fe 100644
--- a/include/asm-arm/arch-ns9xxx/hardware.h
+++ b/include/asm-arm/arch-ns9xxx/hardware.h
@@ -51,8 +51,9 @@
                        ~(__REGVAL(reg ## _ ## field, value))))          \
                   | (__REGVAL(reg ## _ ## field, value))))
 
-#  define REGGET(reg, field)                                            \
-        ((reg & (reg ## _ ## field)) / (field & (-field)))
+#  define REGGET(var, reg, field)                                       \
+        ((var & (reg ## _ ## field)) /                                  \
+         ((reg ## _ ## field) & (-(reg ## _ ## field))))
 
 #else
 
diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h
index 716c106ac0bf..223e51b8e104 100644
--- a/include/asm-arm/arch-ns9xxx/processor.h
+++ b/include/asm-arm/arch-ns9xxx/processor.h
@@ -13,6 +13,7 @@
 
 #include <asm/mach-types.h>
 
-#define processor_is_ns9360()   (machine_is_cc9p9360dev())
+#define processor_is_ns9360()   (machine_is_cc9p9360dev()               \
+                || machine_is_cc9p9360js())
 
 #endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys.h
index 8162a50bb273..a42546aeb92a 100644
--- a/include/asm-arm/arch-ns9xxx/regs-sys.h
+++ b/include/asm-arm/arch-ns9xxx/regs-sys.h
@@ -48,6 +48,12 @@
 /* PLL Configuration register */
 #define SYS_PLL         __REG(0xa0900188)
 
+/* PLL FS status */
+#define SYS_PLL_FS              __REGBITS(24, 23)
+
+/* PLL ND status */
+#define SYS_PLL_ND              __REGBITS(20, 16)
+
 /* PLL Configuration register: PLL SW change */
 #define SYS_PLL_SWC             __REGBIT(15)
 #define SYS_PLL_SWC_NO                  __REGVAL(SYS_PLL_SWC, 0)
diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h
index 46ec2243974a..e404b233d8a8 100644
--- a/include/asm-arm/arch-pxa/i2c.h
+++ b/include/asm-arm/arch-pxa/i2c.h
@@ -64,6 +64,7 @@ struct i2c_slave_client;
 struct i2c_pxa_platform_data {
         unsigned int            slave_addr;
         struct i2c_slave_client *slave;
+        unsigned int            class;
 };
 
 extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 139c9d954818..dbcc9298b0c8 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1801,35 +1801,35 @@
 #define CCCR_M_MASK     0x0060          /* Memory Frequency to Run Mode Frequency Multiplier */
 #define CCCR_L_MASK     0x001f          /* Crystal Frequency to Memory Frequency Multiplier */
 
-#define CKEN24_CAMERA   (1 << 24)       /* Camera Interface Clock Enable */
-#define CKEN23_SSP1     (1 << 23)       /* SSP1 Unit Clock Enable */
-#define CKEN22_MEMC     (1 << 22)       /* Memory Controller Clock Enable */
-#define CKEN21_MEMSTK   (1 << 21)       /* Memory Stick Host Controller */
-#define CKEN20_IM       (1 << 20)       /* Internal Memory Clock Enable */
-#define CKEN19_KEYPAD   (1 << 19)       /* Keypad Interface Clock Enable */
-#define CKEN18_USIM     (1 << 18)       /* USIM Unit Clock Enable */
-#define CKEN17_MSL      (1 << 17)       /* MSL Unit Clock Enable */
-#define CKEN16_LCD      (1 << 16)       /* LCD Unit Clock Enable */
-#define CKEN15_PWRI2C   (1 << 15)       /* PWR I2C Unit Clock Enable */
-#define CKEN14_I2C      (1 << 14)       /* I2C Unit Clock Enable */
-#define CKEN13_FICP     (1 << 13)       /* FICP Unit Clock Enable */
-#define CKEN12_MMC      (1 << 12)       /* MMC Unit Clock Enable */
-#define CKEN11_USB      (1 << 11)       /* USB Unit Clock Enable */
-#define CKEN10_ASSP     (1 << 10)       /* ASSP (SSP3) Clock Enable */
-#define CKEN10_USBHOST  (1 << 10)       /* USB Host Unit Clock Enable */
-#define CKEN9_OSTIMER   (1 << 9)        /* OS Timer Unit Clock Enable */
-#define CKEN9_NSSP      (1 << 9)        /* NSSP (SSP2) Clock Enable */
-#define CKEN8_I2S       (1 << 8)        /* I2S Unit Clock Enable */
-#define CKEN7_BTUART    (1 << 7)        /* BTUART Unit Clock Enable */
-#define CKEN6_FFUART    (1 << 6)        /* FFUART Unit Clock Enable */
-#define CKEN5_STUART    (1 << 5)        /* STUART Unit Clock Enable */
-#define CKEN4_HWUART    (1 << 4)        /* HWUART Unit Clock Enable */
-#define CKEN4_SSP3      (1 << 4)        /* SSP3 Unit Clock Enable */
-#define CKEN3_SSP       (1 << 3)        /* SSP Unit Clock Enable */
-#define CKEN3_SSP2      (1 << 3)        /* SSP2 Unit Clock Enable */
-#define CKEN2_AC97      (1 << 2)        /* AC97 Unit Clock Enable */
-#define CKEN1_PWM1      (1 << 1)        /* PWM1 Clock Enable */
-#define CKEN0_PWM0      (1 << 0)        /* PWM0 Clock Enable */
+#define CKEN_CAMERA     (24)    /* Camera Interface Clock Enable */
+#define CKEN_SSP1       (23)    /* SSP1 Unit Clock Enable */
+#define CKEN_MEMC       (22)    /* Memory Controller Clock Enable */
+#define CKEN_MEMSTK     (21)    /* Memory Stick Host Controller */
+#define CKEN_IM         (20)    /* Internal Memory Clock Enable */
+#define CKEN_KEYPAD     (19)    /* Keypad Interface Clock Enable */
+#define CKEN_USIM       (18)    /* USIM Unit Clock Enable */
+#define CKEN_MSL        (17)    /* MSL Unit Clock Enable */
+#define CKEN_LCD        (16)    /* LCD Unit Clock Enable */
+#define CKEN_PWRI2C     (15)    /* PWR I2C Unit Clock Enable */
+#define CKEN_I2C        (14)    /* I2C Unit Clock Enable */
+#define CKEN_FICP       (13)    /* FICP Unit Clock Enable */
+#define CKEN_MMC        (12)    /* MMC Unit Clock Enable */
+#define CKEN_USB        (11)    /* USB Unit Clock Enable */
+#define CKEN_ASSP       (10)    /* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST    (10)    /* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER    (9)     /* OS Timer Unit Clock Enable */
+#define CKEN_NSSP       (9)     /* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S        (8)     /* I2S Unit Clock Enable */
+#define CKEN_BTUART     (7)     /* BTUART Unit Clock Enable */
+#define CKEN_FFUART     (6)     /* FFUART Unit Clock Enable */
+#define CKEN_STUART     (5)     /* STUART Unit Clock Enable */
+#define CKEN_HWUART     (4)     /* HWUART Unit Clock Enable */
+#define CKEN_SSP3       (4)     /* SSP3 Unit Clock Enable */
+#define CKEN_SSP        (3)     /* SSP Unit Clock Enable */
+#define CKEN_SSP2       (3)     /* SSP2 Unit Clock Enable */
+#define CKEN_AC97       (2)     /* AC97 Unit Clock Enable */
+#define CKEN_PWM1       (1)     /* PWM1 Clock Enable */
+#define CKEN_PWM0       (0)     /* PWM0 Clock Enable */
 
 #define OSCC_OON        (1 << 1)        /* 32.768kHz OON (write-once only bit) */
 #define OSCC_OOK        (1 << 0)        /* 32.768kHz OOK (read-only bit) */
diff --git a/include/asm-arm/arch-s3c2410/regs-ac97.h b/include/asm-arm/arch-s3c2410/regs-ac97.h
index bdd6a4f93d7f..b004dee6bcaf 100644
--- a/include/asm-arm/arch-s3c2410/regs-ac97.h
+++ b/include/asm-arm/arch-s3c2410/regs-ac97.h
@@ -13,11 +13,55 @@
 #ifndef __ASM_ARCH_REGS_AC97_H
 #define __ASM_ARCH_REGS_AC97_H __FILE__
 
-#define S3C_AC97_GLBCTRL        (0x00)
-#define S3C_AC97_GLBSTAT        (0x04)
-#define S3C_AC97_CODEC_CMD      (0x08)
-#define S3C_AC97_PCM_ADDR       (0x10)
-#define S3C_AC97_PCM_DATA       (0x18)
-#define S3C_AC97_MIC_DATA       (0x1C)
+#define S3C_AC97_GLBCTRL                                (0x00)
+
+#define S3C_AC97_GLBCTRL_CODECREADYIE                   (1<<22)
+#define S3C_AC97_GLBCTRL_PCMOUTURIE                     (1<<21)
+#define S3C_AC97_GLBCTRL_PCMINORIE                      (1<<20)
+#define S3C_AC97_GLBCTRL_MICINORIE                      (1<<19)
+#define S3C_AC97_GLBCTRL_PCMOUTTIE                      (1<<18)
+#define S3C_AC97_GLBCTRL_PCMINTIE                       (1<<17)
+#define S3C_AC97_GLBCTRL_MICINTIE                       (1<<16)
+#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF                   (0<<12)
+#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO                   (1<<12)
+#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA                   (2<<12)
+#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK                  (3<<12)
+#define S3C_AC97_GLBCTRL_PCMINTM_OFF                    (0<<10)
+#define S3C_AC97_GLBCTRL_PCMINTM_PIO                    (1<<10)
+#define S3C_AC97_GLBCTRL_PCMINTM_DMA                    (2<<10)
+#define S3C_AC97_GLBCTRL_PCMINTM_MASK                   (3<<10)
+#define S3C_AC97_GLBCTRL_MICINTM_OFF                    (0<<8)
+#define S3C_AC97_GLBCTRL_MICINTM_PIO                    (1<<8)
+#define S3C_AC97_GLBCTRL_MICINTM_DMA                    (2<<8)
+#define S3C_AC97_GLBCTRL_MICINTM_MASK                   (3<<8)
+#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE             (1<<3)
+#define S3C_AC97_GLBCTRL_ACLINKON                       (1<<2)
+#define S3C_AC97_GLBCTRL_WARMRESET                      (1<<1)
+#define S3C_AC97_GLBCTRL_COLDRESET                      (1<<0)
+
+#define S3C_AC97_GLBSTAT                                (0x04)
+
+#define S3C_AC97_GLBSTAT_CODECREADY                     (1<<22)
+#define S3C_AC97_GLBSTAT_PCMOUTUR                       (1<<21)
+#define S3C_AC97_GLBSTAT_PCMINORI                       (1<<20)
+#define S3C_AC97_GLBSTAT_MICINORI                       (1<<19)
+#define S3C_AC97_GLBSTAT_PCMOUTTI                       (1<<18)
+#define S3C_AC97_GLBSTAT_PCMINTI                        (1<<17)
+#define S3C_AC97_GLBSTAT_MICINTI                        (1<<16)
+#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE                 (0<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_INIT                 (1<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_READY                (2<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE               (3<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_LP                   (4<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_WARM                 (5<<0)
+
+#define S3C_AC97_CODEC_CMD                              (0x08)
+
+#define S3C_AC97_CODEC_CMD_READ                         (1<<23)
+
+#define S3C_AC97_STAT                                   (0x0c)
+#define S3C_AC97_PCM_ADDR                               (0x10)
+#define S3C_AC97_PCM_DATA                               (0x18)
+#define S3C_AC97_MIC_DATA                               (0x1C)
 
 #endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h
index 3c8354619b60..e1e9805d2d9a 100644
--- a/include/asm-arm/arch-s3c2410/regs-udc.h
+++ b/include/asm-arm/arch-s3c2410/regs-udc.h
@@ -75,7 +75,7 @@
 #define S3C2410_UDC_OUT_FIFO_CNT1_REG   S3C2410_USBDREG(0x0198)
 #define S3C2410_UDC_OUT_FIFO_CNT2_REG   S3C2410_USBDREG(0x019c)
 
-
+#define S3C2410_UDC_FUNCADDR_UPDATE     (1<<7)
 
 #define S3C2410_UDC_PWR_ISOUP           (1<<7) // R/W
 #define S3C2410_UDC_PWR_RESET           (1<<3) // R
@@ -135,10 +135,6 @@
 #define S3C2410_UDC_OCSR2_ISO           (1<<6) // R/W
 #define S3C2410_UDC_OCSR2_DMAIEN        (1<<5) // R/W
 
-#define S3C2410_UDC_SETIX(base,x)           \
-        writel(S3C2410_UDC_INDEX_ ## x, base+S3C2410_UDC_INDEX_REG);
-
-
 #define S3C2410_UDC_EP0_CSR_OPKRDY      (1<<0)
 #define S3C2410_UDC_EP0_CSR_IPKRDY      (1<<1)
 #define S3C2410_UDC_EP0_CSR_SENTSTL     (1<<2)
diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h
index a0ae2b954d29..3a6d3eb27622 100644
--- a/include/asm-arm/ecard.h
+++ b/include/asm-arm/ecard.h
@@ -160,6 +160,7 @@ struct expansion_card {
         unsigned char           irqmask;        /* IRQ mask                     */
         unsigned char           fiqmask;        /* FIQ mask                     */
         unsigned char           claimed;        /* Card claimed?                */
+        unsigned char           easi;           /* EASI card                    */
 
         void                    *irq_data;      /* Data for use for IRQ by card */
         void                    *fiq_data;      /* Data for use for FIQ by card */
@@ -169,7 +170,6 @@ struct expansion_card {
         CONST unsigned int      dma;            /* DMA number (for request_dma) */
         CONST unsigned int      irq;            /* IRQ number (for request_irq) */
         CONST unsigned int      fiq;            /* FIQ number (for request_irq) */
-        CONST card_type_t       type;           /* Type of card                 */
         CONST struct in_ecid    cid;            /* Card Identification          */
 
         /* Private internal data */
@@ -224,56 +224,6 @@ ecard_address(struct expansion_card *ec, card_type_t type, card_speed_t speed)
 extern int ecard_request_resources(struct expansion_card *ec);
 extern void ecard_release_resources(struct expansion_card *ec);
 
-#ifdef ECARD_C
-/* Definitions internal to ecard.c - for it's use only!!
- *
- * External expansion card header as read from the card
- */
-struct ex_ecid {
-        unsigned char   r_irq:1;
-        unsigned char   r_zero:1;
-        unsigned char   r_fiq:1;
-        unsigned char   r_id:4;
-        unsigned char   r_a:1;
-
-        unsigned char   r_cd:1;
-        unsigned char   r_is:1;
-        unsigned char   r_w:2;
-        unsigned char   r_r1:4;
-
-        unsigned char   r_r2:8;
-
-        unsigned char   r_prod[2];
-
-        unsigned char   r_manu[2];
-
-        unsigned char   r_country;
-
-        unsigned char   r_fiqmask;
-        unsigned char   r_fiqoff[3];
-
-        unsigned char   r_irqmask;
-        unsigned char   r_irqoff[3];
-};
-
-/*
- * Chunk directory entry as read from the card
- */
-struct ex_chunk_dir {
-        unsigned char r_id;
-        unsigned char r_len[3];
-        unsigned long r_start;
-        union {
-                char string[256];
-                char data[1];
-        } d;
-#define c_id(x)         ((x)->r_id)
-#define c_len(x)        ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
-#define c_start(x)      ((x)->r_start)
-};
-
-#endif
-
 extern struct bus_type ecard_bus_type;
 
 #define ECARD_DEV(_d)   container_of((_d), struct expansion_card, dev)
diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h
index 15141a9caca8..63feceb7ede5 100644
--- a/include/asm-arm/hardware/iop3xx.h
+++ b/include/asm-arm/hardware/iop3xx.h
@@ -28,6 +28,7 @@
 extern void gpio_line_config(int line, int direction);
 extern int  gpio_line_get(int line);
 extern void gpio_line_set(int line, int value);
+extern int init_atu;
 #endif
 
 
@@ -41,7 +42,7 @@ extern void gpio_line_set(int line, int value);
                                         IOP3XX_PERIPHERAL_SIZE - 1)
 #define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
                                         IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
                                         (IOP3XX_PERIPHERAL_PHYS_BASE\
                                         - IOP3XX_PERIPHERAL_VIRT_BASE))
 #define IOP3XX_REG_ADDR(reg)            (IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
@@ -103,6 +104,21 @@ extern void gpio_line_set(int line, int value);
 #define IOP3XX_PCIXCMD          (volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
 #define IOP3XX_PCIXSR           (volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
 #define IOP3XX_PCIIRSR          (volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
+#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
+#define IOP3XX_PCSR_IN_Q_BUSY   (1 << 14)
+#define IOP3XX_ATUCR_OUT_EN     (1 << 1)
+
+#define IOP3XX_INIT_ATU_DEFAULT 0
+#define IOP3XX_INIT_ATU_DISABLE -1
+#define IOP3XX_INIT_ATU_ENABLE   1
+
+#ifdef CONFIG_IOP3XX_ATU
+#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\
+                                IOP3XX_INIT_ATU_ENABLE : init_atu)
+#else
+#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\
+                                IOP3XX_INIT_ATU_DISABLE : init_atu)
+#endif
 
 /* Messaging Unit  */
 #define IOP3XX_IMR0             (volatile u32 *)IOP3XX_REG_ADDR(0x0310)
@@ -253,14 +269,12 @@ extern void gpio_line_set(int line, int value);
 /*
  * IOP3XX I/O and Mem space regions for PCI autoconfiguration
  */
-#define IOP3XX_PCI_MEM_WINDOW_SIZE      0x04000000
-#define IOP3XX_PCI_LOWER_MEM_PA         0x80000000
-#define IOP3XX_PCI_LOWER_MEM_BA         (*IOP3XX_OMWTVR0)
+#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
 
 #define IOP3XX_PCI_IO_WINDOW_SIZE       0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA          0x90000000
 #define IOP3XX_PCI_LOWER_IO_VA          0xfe000000
-#define IOP3XX_PCI_LOWER_IO_BA          (*IOP3XX_OIOWTVR)
+#define IOP3XX_PCI_LOWER_IO_BA          0x90000000
 #define IOP3XX_PCI_UPPER_IO_PA          (IOP3XX_PCI_LOWER_IO_PA +\
                                         IOP3XX_PCI_IO_WINDOW_SIZE - 1)
 #define IOP3XX_PCI_UPPER_IO_VA          (IOP3XX_PCI_LOWER_IO_VA +\
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 5f60b4220906..8261ff9e7955 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -56,13 +56,22 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 
 /*
  * Architecture ioremap implementation.
- *
- * __ioremap takes CPU physical address.
- *
- * __ioremap_pfn takes a Page Frame Number and an offset into that page
  */
-extern void __iomem * __ioremap_pfn(unsigned long, unsigned long, size_t, unsigned long);
-extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
+#define MT_DEVICE               0
+#define MT_DEVICE_NONSHARED     1
+#define MT_DEVICE_CACHED        2
+#define MT_DEVICE_IXP2000       3
+/*
+ * types 4 onwards can be found in asm/mach/map.h and are undefined
+ * for ioremap
+ */
+
+/*
+ * __arm_ioremap takes CPU physical address.
+ * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
+ */
+extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
+extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
 extern void __iounmap(volatile void __iomem *addr);
 
 /*
@@ -203,14 +212,14 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  *
  */
 #ifndef __arch_ioremap
-#define ioremap(cookie,size)            __ioremap(cookie,size,0)
-#define ioremap_nocache(cookie,size)    __ioremap(cookie,size,0)
-#define ioremap_cached(cookie,size)     __ioremap(cookie,size,L_PTE_CACHEABLE)
+#define ioremap(cookie,size)            __arm_ioremap(cookie, size, MT_DEVICE)
+#define ioremap_nocache(cookie,size)    __arm_ioremap(cookie, size, MT_DEVICE)
+#define ioremap_cached(cookie,size)     __arm_ioremap(cookie, size, MT_DEVICE_CACHED)
 #define iounmap(cookie)                 __iounmap(cookie)
 #else
-#define ioremap(cookie,size)            __arch_ioremap((cookie),(size),0)
-#define ioremap_nocache(cookie,size)    __arch_ioremap((cookie),(size),0)
-#define ioremap_cached(cookie,size)     __arch_ioremap((cookie),(size),L_PTE_CACHEABLE)
+#define ioremap(cookie,size)            __arch_ioremap((cookie), (size), MT_DEVICE)
+#define ioremap_nocache(cookie,size)    __arch_ioremap((cookie), (size), MT_DEVICE)
+#define ioremap_cached(cookie,size)     __arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
 #define iounmap(cookie)                 __arch_iounmap(cookie)
 #endif
 
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
index cef5364ed5fe..7ef3c8390180 100644
--- a/include/asm-arm/mach/map.h
+++ b/include/asm-arm/mach/map.h
@@ -9,6 +9,8 @@
  *
  *  Page table mapping constructs and function prototypes
  */
+#include <asm/io.h>
+
 struct map_desc {
         unsigned long virtual;
         unsigned long pfn;
@@ -16,15 +18,16 @@ struct map_desc {
         unsigned int type;
 };
 
-#define MT_DEVICE               0
-#define MT_CACHECLEAN           1
-#define MT_MINICLEAN            2
-#define MT_LOW_VECTORS          3
-#define MT_HIGH_VECTORS         4
-#define MT_MEMORY               5
-#define MT_ROM                  6
-#define MT_IXP2000_DEVICE       7
-#define MT_NONSHARED_DEVICE     8
+/* types 0-3 are defined in asm/io.h */
+#define MT_CACHECLEAN           4
+#define MT_MINICLEAN            5
+#define MT_LOW_VECTORS          6
+#define MT_HIGH_VECTORS         7
+#define MT_MEMORY               8
+#define MT_ROM                  9
+
+#define MT_NONSHARED_DEVICE     MT_DEVICE_NONSHARED
+#define MT_IXP2000_DEVICE       MT_DEVICE_IXP2000
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h
index f6135dbb9fa9..235b753cd877 100644
--- a/include/asm-arm/plat-s3c24xx/clock.h
+++ b/include/asm-arm/plat-s3c24xx/clock.h
@@ -56,6 +56,7 @@ extern struct mutex clocks_mutex;
 extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
 
 extern int s3c24xx_register_clock(struct clk *clk);
+extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
 extern int s3c24xx_setup_clocks(unsigned long xtal,
                                 unsigned long fclk,
diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h
index 15dd18810905..23e420e8bd5b 100644
--- a/include/asm-arm/plat-s3c24xx/cpu.h
+++ b/include/asm-arm/plat-s3c24xx/cpu.h
@@ -40,22 +40,6 @@ extern void s3c24xx_init_uartdevs(char *name,
                                   struct s3c24xx_uart_resources *res,
                                   struct s3c2410_uartcfg *cfg, int no);
 
-/* the board structure is used at first initialsation time
- * to get info such as the devices to register for this
- * board. This is done because platfrom_add_devices() cannot
- * be called from the map_io entry.
-*/
-
-struct s3c24xx_board {
-        struct platform_device  **devices;
-        unsigned int              devices_count;
-
-        struct clk              **clocks;
-        unsigned int              clocks_count;
-};
-
-extern void s3c24xx_set_board(struct s3c24xx_board *board);
-
 /* timer for 2410/2440 */
 
 struct sys_timer;