13 files changed, 59 insertions, 39 deletions

diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h
index cd22035a7160..6fac2c8935be 100644
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ b/include/asm-arm/arch-omap/board-palmte.h
@@ -14,8 +14,6 @@
 #ifndef __OMAP_BOARD_PALMTE_H
 #define __OMAP_BOARD_PALMTE_H
 
-#include <asm/arch/gpio.h>
-
 #define PALMTE_USBDETECT_GPIO   0
 #define PALMTE_USB_OR_DC_GPIO   1
 #define PALMTE_TSC_GPIO         4
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 57523bdb642b..12a5e4de9518 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -73,6 +73,8 @@ struct clk {
 #endif
 };
 
+struct cpufreq_frequency_table;
+
 struct clk_functions {
         int             (*clk_enable)(struct clk *clk);
         void            (*clk_disable)(struct clk *clk);
@@ -83,6 +85,9 @@ struct clk_functions {
         void            (*clk_allow_idle)(struct clk *clk);
         void            (*clk_deny_idle)(struct clk *clk);
         void            (*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+        void            (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
 };
 
 extern unsigned int mpurate;
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
index 224e009e5296..36a3b62d4d8d 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -47,4 +47,8 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 }
 #endif
 
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
index 9944bb5d5330..59c0686f8be7 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/include/asm-arm/arch-omap/control.h
@@ -80,7 +80,7 @@
 #define OMAP24XX_CONTROL_SEC_TAP        (OMAP2_CONTROL_GENERAL + 0x0064)
 #define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD        (OMAP2_CONTROL_GENERAL + 0x006c)
 #define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD  (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD   (OMAP2_CONTROL_GENERAL + 0x0074
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD   (OMAP2_CONTROL_GENERAL + 0x0074)
 #define OMAP24XX_CONTROL_SEC_STATUS             (OMAP2_CONTROL_GENERAL + 0x0080)
 #define OMAP24XX_CONTROL_SEC_ERR_STATUS         (OMAP2_CONTROL_GENERAL + 0x0084)
 #define OMAP24XX_CONTROL_STATUS                 (OMAP2_CONTROL_GENERAL + 0x0088)
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index 74cd57221c8e..369093a45fcf 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -8,6 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <asm/hardware.h>
+#include <asm/arch/io.h>
 #include <asm/arch/irqs.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 86621a04cd8f..5ee6a49864c3 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -26,7 +26,6 @@
 #ifndef __ASM_ARCH_OMAP_GPIO_H
 #define __ASM_ARCH_OMAP_GPIO_H
 
-#include <asm/hardware.h>
 #include <asm/arch/irqs.h>
 #include <asm/io.h>
 
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index da572092e255..91d85b3417b7 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -41,7 +41,6 @@
 #include <asm/types.h>
 #include <asm/arch/cpu.h>
 #endif
-#include <asm/arch/io.h>
 #include <asm/arch/serial.h>
 
 /*
diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h
index c9588f49eb52..7cfc5f258560 100644
--- a/include/asm-arm/arch-omap/mmc.h
+++ b/include/asm-arm/arch-omap/mmc.h
@@ -15,21 +15,16 @@
 #include <linux/device.h>
 #include <linux/mmc/host.h>
 
+#include <asm/arch/board.h>
+
 #define OMAP_MMC_MAX_SLOTS      2
 
 struct omap_mmc_platform_data {
         struct omap_mmc_conf    conf;
 
-        unsigned enabled:1;
         /* number of slots on board */
         unsigned nr_slots:2;
-        /* nomux means "standard" muxing is wrong on this board, and that
-         * board-specific code handled it before common init logic.
-         */
-        unsigned nomux:1;
-        /* 4 wire signaling is optional, and is only used for SD/SDIO and
-         * MMCv4 */
-        unsigned wire4:1;
+
         /* set if your board has components or wiring that limits the
          * maximum frequency on the MMC bus */
         unsigned int max_freq;
@@ -40,6 +35,11 @@ struct omap_mmc_platform_data {
          * not supported */
         int (* init)(struct device *dev);
         void (* cleanup)(struct device *dev);
+        void (* shutdown)(struct device *dev);
+
+        /* To handle board related suspend/resume functionality for MMC */
+        int (*suspend)(struct device *dev, int slot);
+        int (*resume)(struct device *dev, int slot);
 
         struct omap_mmc_slot_data {
                 int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
@@ -56,13 +56,19 @@ struct omap_mmc_platform_data {
 
                 const char *name;
                 u32 ocr_mask;
+
+                /* Card detection IRQs */
+                int card_detect_irq;
+                int (* card_detect)(int irq);
+
+                unsigned int ban_openended:1;
+
         } slots[OMAP_MMC_MAX_SLOTS];
 };
 
 extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
 
 /* called from board-specific card detection service routine */
-extern void omap_mmc_notify_card_detect(struct device *dev, int slot, int detected);
 extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
 
 #endif
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
index 14a344aa3cc7..762eba535813 100644
--- a/include/asm-arm/arch-sa1100/collie.h
+++ b/include/asm-arm/arch-sa1100/collie.h
@@ -34,9 +34,12 @@
 
 #define COLLIE_GPIO_ON_KEY              GPIO_GPIO (0)
 #define COLLIE_GPIO_AC_IN               GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT            GPIO_GPIO (11)
 #define COLLIE_GPIO_CF_IRQ              GPIO_GPIO (14)
 #define COLLIE_GPIO_nREMOCON_INT        GPIO_GPIO (15)
 #define COLLIE_GPIO_UCB1x00_RESET       GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON             GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON         GPIO_GPIO (18)
 #define COLLIE_GPIO_CO                  GPIO_GPIO (20)
 #define COLLIE_GPIO_MCP_CLK             GPIO_GPIO (21)
 #define COLLIE_GPIO_CF_CD               GPIO_GPIO (22)
@@ -49,6 +52,7 @@
 
 #define COLLIE_IRQ_GPIO_ON_KEY          IRQ_GPIO0
 #define COLLIE_IRQ_GPIO_AC_IN           IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ        IRQ_GPIO11
 #define COLLIE_IRQ_GPIO_CF_IRQ          IRQ_GPIO14
 #define COLLIE_IRQ_GPIO_nREMOCON_INT    IRQ_GPIO15
 #define COLLIE_IRQ_GPIO_CO              IRQ_GPIO20
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
index d7940683efb1..7bf80484bb77 100644
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ b/include/asm-arm/arch-sa1100/irqs.h
@@ -141,7 +141,7 @@
 #define IRQ_LOCOMO_LT           (IRQ_BOARD_END + 17)
 #define IRQ_LOCOMO_SPI_RFR      (IRQ_BOARD_END + 18)
 #define IRQ_LOCOMO_SPI_RFW      (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN     (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_REND     (IRQ_BOARD_END + 20)
 #define IRQ_LOCOMO_SPI_TEND     (IRQ_BOARD_END + 21)
 
 /*
diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
index adab77780ed3..fb0645de6f31 100644
--- a/include/asm-arm/hardware/locomo.h
+++ b/include/asm-arm/hardware/locomo.h
@@ -58,6 +58,11 @@
 #define LOCOMO_SPIMD    0x00            /* SPI mode setting */
 #define LOCOMO_SPICT    0x04            /* SPI mode control */
 #define LOCOMO_SPIST    0x08            /* SPI status */
+#define LOCOMO_SPI_TEND (1 << 3)        /* Transfer end bit */
+#define LOCOMO_SPI_REND (1 << 2)        /* Receive end bit */
+#define LOCOMO_SPI_RFW  (1 << 1)        /* write buffer bit */
+#define LOCOMO_SPI_RFR  (1)             /* read buffer bit */
+
 #define LOCOMO_SPIIS    0x10            /* SPI interrupt status */
 #define LOCOMO_SPIWE    0x14            /* SPI interrupt status write enable */
 #define LOCOMO_SPIIE    0x18            /* SPI interrupt enable */
@@ -66,16 +71,12 @@
 #define LOCOMO_SPIRD    0x24            /* SPI receive data read */
 #define LOCOMO_SPITS    0x28            /* SPI transfer data shift */
 #define LOCOMO_SPIRS    0x2C            /* SPI receive data shift */
-#define LOCOMO_SPI_TEND (1 << 3)        /* Transfer end bit */
-#define LOCOMO_SPI_OVRN (1 << 2)        /* Over Run bit */
-#define LOCOMO_SPI_RFW  (1 << 1)        /* write buffer bit */
-#define LOCOMO_SPI_RFR  (1)             /* read buffer bit */
 
 /* GPIO */
 #define LOCOMO_GPD              0x90    /* GPIO direction */
 #define LOCOMO_GPE              0x94    /* GPIO input enable */
 #define LOCOMO_GPL              0x98    /* GPIO level */
-#define LOCOMO_GPO              0x9c    /* GPIO out data setteing */
+#define LOCOMO_GPO              0x9c    /* GPIO out data setting */
 #define LOCOMO_GRIE             0xa0    /* GPIO rise detection */
 #define LOCOMO_GFIE             0xa4    /* GPIO fall detection */
 #define LOCOMO_GIS              0xa8    /* GPIO edge detection status */
@@ -96,6 +97,9 @@
 #define LOCOMO_GPIO_DAC_SDATA   LOCOMO_GPIO(10)
 #define LOCOMO_GPIO_DAC_SCK     LOCOMO_GPIO(11)
 #define LOCOMO_GPIO_DAC_SLOAD   LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT  LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER  LOCOMO_GPIO(15)
 
 /* Start the definitions of the devices.  Each device has an initial
  * base address and a series of offsets from that base address. */
@@ -122,7 +126,7 @@
 /* Audio controller */
 #define LOCOMO_AUDIO            0x54
 #define LOCOMO_ACC              0x00    /* Audio clock */
-#define LOCOMO_PAIF             0x7C    /* PCM audio interface */
+#define LOCOMO_PAIF             0xD0    /* PCM audio interface */
 /* Audio clock */
 #define LOCOMO_ACC_XON          0x80
 #define LOCOMO_ACC_XEN          0x40
@@ -162,7 +166,7 @@ extern struct bus_type locomo_bus_type;
 #define LOCOMO_DEVID_AUDIO      3
 #define LOCOMO_DEVID_LED        4
 #define LOCOMO_DEVID_UART       5
-#define LOCOMO_DEVID_SPI                6
+#define LOCOMO_DEVID_SPI        6
 
 struct locomo_dev {
         struct device   dev;
@@ -204,7 +208,6 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits);
 int locomo_gpio_read_output(struct device *dev, unsigned int bits);
 void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
 
-
 /* M62332 control function */
 void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
 
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 5c22b0112106..8e05bdb5f12f 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -179,10 +179,10 @@ typedef unsigned long pgprot_t;
 
 #endif /* STRICT_MM_TYPECHECKS */
 
-typedef struct page *pgtable_t;
-
 #endif /* CONFIG_MMU */
 
+typedef struct page *pgtable_t;
+
 #include <asm/memory.h>
 
 #endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 6335de9a2bb3..514af792a598 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -48,20 +48,6 @@
 #define CPUID_TCM       2
 #define CPUID_TLBTYPE   3
 
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg)                                                 \
-        ({                                                              \
-                unsigned int __val;                                     \
-                asm("mrc        p15, 0, %0, c0, c0, " __stringify(reg)  \
-                    : "=r" (__val)                                      \
-                    :                                                   \
-                    : "cc");                                            \
-                __val;                                                  \
-        })
-#else
-#define read_cpuid(reg) (processor_id)
-#endif
-
 /*
  * This is used to ensure the compiler did actually allocate the register we
  * asked it for some inline assembly sequences.  Apparently we can't trust
@@ -78,6 +64,21 @@
 #include <linux/stringify.h>
 #include <linux/irqflags.h>
 
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg)                                                 \
+        ({                                                              \
+                unsigned int __val;                                     \
+                asm("mrc        p15, 0, %0, c0, c0, " __stringify(reg)  \
+                    : "=r" (__val)                                      \
+                    :                                                   \
+                    : "cc");                                            \
+                __val;                                                  \
+        })
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
 /*
  * The CPU ID never changes at run time, so we might as well tell the
  * compiler that it's constant.  Use this function to read the CPU ID