1 files changed, 0 insertions, 29 deletions

diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
deleted file mode 100644
index 9e5ed7c0f27f..000000000000
--- a/include/asm-arm/mach/udc_pxa2xx.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/mach/udc_pxa2xx.h
- *
- * This supports machine-specific differences in how the PXA2xx
- * USB Device Controller (UDC) is wired.
- *
- * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
- * linux/arch/mach-ixp4xx/<machine>.c and used in
- * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
- */
-
-struct pxa2xx_udc_mach_info {
-        int  (*udc_is_connected)(void);         /* do we see host? */
-        void (*udc_command)(int cmd);
-#define PXA2XX_UDC_CMD_CONNECT          0       /* let host see us */
-#define PXA2XX_UDC_CMD_DISCONNECT       1       /* so host won't see us */
-
-        /* Boards following the design guidelines in the developer's manual,
-         * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
-         * VBUS IRQ and omit the methods above.  Store the GPIO number
-         * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
-         * Note that sometimes the signals go through inverters...
-         */
-        bool    gpio_vbus_inverted;
-        u16     gpio_vbus;                      /* high == vbus present */
-        bool    gpio_pullup_inverted;
-        u16     gpio_pullup;                    /* high == pullup activated */
-};
-