1 files changed, 9 insertions, 76 deletions

diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
index 19e77f038042..b33ed3b05ef5 100644
--- a/include/asm-arm/arch-s3c2410/map.h
+++ b/include/asm-arm/arch-s3c2410/map.h
@@ -13,58 +13,36 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
-/* we have a bit of a tight squeeze to fit all our registers from
- * 0xF00000000 upwards, since we use all of the nGCS space in some
- * capacity, and also need to fit the S3C2410 registers in as well...
- *
- * we try to ensure stuff like the IRQ registers are available for
- * an single MOVS instruction (ie, only 8 bits of set data)
- *
- * Note, we are trying to remove some of these from the implementation
- * as they are only useful to certain drivers...
- */
-
-#ifndef __ASSEMBLY__
-#define S3C2410_ADDR(x)   ((void __iomem __force *)0xF0000000 + (x))
-#else
-#define S3C2410_ADDR(x)   (0xF0000000 + (x))
-#endif
+#include <asm/plat-s3c/map.h>
 
-#define S3C2400_ADDR(x)   S3C2410_ADDR(x)
+#define S3C2410_ADDR(x)         S3C_ADDR(x)
 
 /* interrupt controller is the first thing we put in, to make
  * the assembly code for the irq detection easier
  */
-#define S3C24XX_VA_IRQ     S3C2410_ADDR(0x00000000)
-#define S3C2400_PA_IRQ     (0x14400000)
+#define S3C24XX_VA_IRQ     S3C_VA_IRQ
 #define S3C2410_PA_IRQ     (0x4A000000)
 #define S3C24XX_SZ_IRQ     SZ_1M
 
 /* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C2410_ADDR(0x00100000)
-#define S3C2400_PA_MEMCTRL (0x14000000)
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
 #define S3C2410_PA_MEMCTRL (0x48000000)
 #define S3C24XX_SZ_MEMCTRL SZ_1M
 
 /* USB host controller */
-#define S3C2400_PA_USBHOST (0x14200000)
 #define S3C2410_PA_USBHOST (0x49000000)
 #define S3C24XX_SZ_USBHOST SZ_1M
 
 /* DMA controller */
-#define S3C2400_PA_DMA     (0x14600000)
 #define S3C2410_PA_DMA     (0x4B000000)
 #define S3C24XX_SZ_DMA     SZ_1M
 
 /* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C2410_ADDR(0x00200000)
-#define S3C2400_PA_CLKPWR  (0x14800000)
+#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
 #define S3C2410_PA_CLKPWR  (0x4C000000)
 #define S3C24XX_SZ_CLKPWR  SZ_1M
 
 /* LCD controller */
-#define S3C24XX_VA_LCD     S3C2410_ADDR(0x00300000)
-#define S3C2400_PA_LCD     (0x14A00000)
 #define S3C2410_PA_LCD     (0x4D000000)
 #define S3C24XX_SZ_LCD     SZ_1M
 
@@ -72,41 +50,30 @@
 #define S3C2410_PA_NAND    (0x4E000000)
 #define S3C24XX_SZ_NAND    SZ_1M
 
-/* MMC controller - available on the S3C2400 */
-#define S3C2400_PA_MMC     (0x15A00000)
-#define S3C2400_SZ_MMC     SZ_1M
-
 /* UARTs */
-#define S3C24XX_VA_UART    S3C2410_ADDR(0x00400000)
-#define S3C2400_PA_UART    (0x15000000)
+#define S3C24XX_VA_UART    S3C_VA_UART
 #define S3C2410_PA_UART    (0x50000000)
 #define S3C24XX_SZ_UART    SZ_1M
 
 /* Timers */
-#define S3C24XX_VA_TIMER   S3C2410_ADDR(0x00500000)
-#define S3C2400_PA_TIMER   (0x15100000)
+#define S3C24XX_VA_TIMER   S3C_VA_TIMER
 #define S3C2410_PA_TIMER   (0x51000000)
 #define S3C24XX_SZ_TIMER   SZ_1M
 
 /* USB Device port */
-#define S3C24XX_VA_USBDEV  S3C2410_ADDR(0x00600000)
-#define S3C2400_PA_USBDEV  (0x15200140)
 #define S3C2410_PA_USBDEV  (0x52000000)
 #define S3C24XX_SZ_USBDEV  SZ_1M
 
 /* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00700000)
-#define S3C2400_PA_WATCHDOG (0x15300000)
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
 #define S3C2410_PA_WATCHDOG (0x53000000)
 #define S3C24XX_SZ_WATCHDOG SZ_1M
 
 /* IIC hardware controller */
-#define S3C2400_PA_IIC     (0x15400000)
 #define S3C2410_PA_IIC     (0x54000000)
 #define S3C24XX_SZ_IIC     SZ_1M
 
 /* IIS controller */
-#define S3C2400_PA_IIS     (0x15508000)
 #define S3C2410_PA_IIS     (0x55000000)
 #define S3C24XX_SZ_IIS     SZ_1M
 
@@ -116,27 +83,23 @@
  * it is the same distance apart from the UART in the
  * phsyical address space, as the initial mapping for the IO
  * is done as a 1:1 maping. This puts it (currently) at
- * 0xF6800000, which is not in the way of any current mapping
+ * 0xFA800000, which is not in the way of any current mapping
  * by the base system.
 */
 
-#define S3C2400_PA_GPIO    (0x15600000)
 #define S3C2410_PA_GPIO    (0x56000000)
 #define S3C24XX_VA_GPIO    ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
 #define S3C24XX_SZ_GPIO    SZ_1M
 
 /* RTC */
-#define S3C2400_PA_RTC     (0x15700040)
 #define S3C2410_PA_RTC     (0x57000000)
 #define S3C24XX_SZ_RTC     SZ_1M
 
 /* ADC */
-#define S3C2400_PA_ADC     (0x15800000)
 #define S3C2410_PA_ADC     (0x58000000)
 #define S3C24XX_SZ_ADC     SZ_1M
 
 /* SPI */
-#define S3C2400_PA_SPI     (0x15900000)
 #define S3C2410_PA_SPI     (0x59000000)
 #define S3C24XX_SZ_SPI     SZ_1M
 
@@ -177,37 +140,8 @@
 
 #define S3C2410_SDRAM_PA    (S3C2410_CS6)
 
-#define S3C2400_CS0 (0x00000000)
-#define S3C2400_CS1 (0x02000000)
-#define S3C2400_CS2 (0x04000000)
-#define S3C2400_CS3 (0x06000000)
-#define S3C2400_CS4 (0x08000000)
-#define S3C2400_CS5 (0x0A000000)
-#define S3C2400_CS6 (0x0C000000)
-#define S3C2400_CS7 (0x0E000000)
-
-#define S3C2400_SDRAM_PA    (S3C2400_CS6)
-
 /* Use a single interface for common resources between S3C24XX cpus */
 
-#ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_PA_IRQ      S3C2400_PA_IRQ
-#define S3C24XX_PA_MEMCTRL  S3C2400_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2400_PA_USBHOST
-#define S3C24XX_PA_DMA      S3C2400_PA_DMA
-#define S3C24XX_PA_CLKPWR   S3C2400_PA_CLKPWR
-#define S3C24XX_PA_LCD      S3C2400_PA_LCD
-#define S3C24XX_PA_UART     S3C2400_PA_UART
-#define S3C24XX_PA_TIMER    S3C2400_PA_TIMER
-#define S3C24XX_PA_USBDEV   S3C2400_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG
-#define S3C24XX_PA_IIC      S3C2400_PA_IIC
-#define S3C24XX_PA_IIS      S3C2400_PA_IIS
-#define S3C24XX_PA_GPIO     S3C2400_PA_GPIO
-#define S3C24XX_PA_RTC      S3C2400_PA_RTC
-#define S3C24XX_PA_ADC      S3C2400_PA_ADC
-#define S3C24XX_PA_SPI      S3C2400_PA_SPI
-#else
 #define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
 #define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
 #define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
@@ -224,7 +158,6 @@
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
-#endif
 
 /* deal with the registers that move under the 2412/2413 */