1 files changed, 112 insertions, 0 deletions

diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h
new file mode 100644
index 000000000000..991cb688db75
--- /dev/null
+++ b/include/asm-arm/arch-pxa/regs-ssp.h
@@ -0,0 +1,112 @@
+#ifndef __ASM_ARCH_REGS_SSP_H
+#define __ASM_ARCH_REGS_SSP_H
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0           (0x00)  /* SSP Control Register 0 */
+#define SSCR1           (0x04)  /* SSP Control Register 1 */
+#define SSSR            (0x08)  /* SSP Status Register */
+#define SSITR           (0x0C)  /* SSP Interrupt Test Register */
+#define SSDR            (0x10)  /* SSP Data Write/Data Read Register */
+
+#define SSTO            (0x28)  /* SSP Time Out Register */
+#define SSPSP           (0x2C)  /* SSP Programmable Serial Protocol */
+#define SSTSA           (0x30)  /* SSP Tx Timeslot Active */
+#define SSRSA           (0x34)  /* SSP Rx Timeslot Active */
+#define SSTSS           (0x38)  /* SSP Timeslot Status */
+#define SSACD           (0x3C)  /* SSP Audio Clock Divider */
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS       (0x0000000f)    /* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)    /* Data Size Select [4..16] */
+#define SSCR0_FRF       (0x00000030)    /* FRame Format (mask) */
+#define SSCR0_Motorola  (0x0 << 4)      /* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI        (0x1 << 4)      /* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National  (0x2 << 4)      /* National Microwire */
+#define SSCR0_ECS       (1 << 6)        /* External clock select */
+#define SSCR0_SSE       (1 << 7)        /* Synchronous Serial Port Enable */
+#if defined(CONFIG_PXA25x)
+#define SSCR0_SCR       (0x0000ff00)    /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+#elif defined(CONFIG_PXA27x)
+#define SSCR0_SCR       (0x000fff00)    /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#define SSCR0_EDSS      (1 << 20)       /* Extended data size select */
+#define SSCR0_NCS       (1 << 21)       /* Network clock select */
+#define SSCR0_RIM       (1 << 22)       /* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM       (1 << 23)       /* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC      (0x07000000)    /* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)  /* Time slots per frame [1..8] */
+#define SSCR0_ADC       (1 << 30)       /* Audio clock select */
+#define SSCR0_MOD       (1 << 31)       /* Mode (normal or network) */
+#endif
+
+#define SSCR1_RIE       (1 << 0)        /* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE       (1 << 1)        /* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM       (1 << 2)        /* Loop-Back Mode */
+#define SSCR1_SPO       (1 << 3)        /* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH       (1 << 4)        /* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS      (1 << 5)        /* Microwire Transmit Data Size */
+#define SSCR1_TFT       (0x000003c0)    /* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT       (0x00003c00)    /* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF        (1 << 2)        /* Transmit FIFO Not Full */
+#define SSSR_RNE        (1 << 3)        /* Receive FIFO Not Empty */
+#define SSSR_BSY        (1 << 4)        /* SSP Busy */
+#define SSSR_TFS        (1 << 5)        /* Transmit FIFO Service Request */
+#define SSSR_RFS        (1 << 6)        /* Receive FIFO Service Request */
+#define SSSR_ROR        (1 << 7)        /* Receive FIFO Overrun */
+
+#define SSCR0_TIM               (1 << 23)       /* Transmit FIFO Under Run Interrupt Mask */
+#define SSCR0_RIM               (1 << 22)       /* Receive FIFO Over Run interrupt Mask */
+#define SSCR0_NCS               (1 << 21)       /* Network Clock Select */
+#define SSCR0_EDSS              (1 << 20)       /* Extended Data Size Select */
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP             (1 << 4)        /* TI Sync Serial Protocol */
+#define SSCR0_PSP               (3 << 4)        /* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP             (1 << 31)       /* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE               (1 << 30)       /* TXD Tristate Enable */
+#define SSCR1_EBCEI             (1 << 29)       /* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR              (1 << 28)       /* Slave Clock free Running */
+#define SSCR1_ECRA              (1 << 27)       /* Enable Clock Request A */
+#define SSCR1_ECRB              (1 << 26)       /* Enable Clock request B */
+#define SSCR1_SCLKDIR           (1 << 25)       /* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR           (1 << 24)       /* Frame Direction */
+#define SSCR1_RWOT              (1 << 23)       /* Receive Without Transmit */
+#define SSCR1_TRAIL             (1 << 22)       /* Trailing Byte */
+#define SSCR1_TSRE              (1 << 21)       /* Transmit Service Request Enable */
+#define SSCR1_RSRE              (1 << 20)       /* Receive Service Request Enable */
+#define SSCR1_TINTE             (1 << 19)       /* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE             (1 << 18)       /* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_STRF              (1 << 15)       /* Select FIFO or EFWR */
+#define SSCR1_EFWR              (1 << 14)       /* Enable FIFO Write/Read */
+
+#define SSSR_BCE                (1 << 23)       /* Bit Count Error */
+#define SSSR_CSS                (1 << 22)       /* Clock Synchronisation Status */
+#define SSSR_TUR                (1 << 21)       /* Transmit FIFO Under Run */
+#define SSSR_EOC                (1 << 20)       /* End Of Chain */
+#define SSSR_TINT               (1 << 19)       /* Receiver Time-out Interrupt */
+#define SSSR_PINT               (1 << 18)       /* Peripheral Trailing Byte Interrupt */
+
+#define SSPSP_FSRT              (1 << 25)       /* Frame Sync Relative Timing */
+#define SSPSP_DMYSTOP(x)        ((x) << 23)     /* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)       ((x) << 16)     /* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)        ((x) << 9)      /* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)        ((x) << 7)      /* Dummy Start */
+#define SSPSP_STRTDLY(x)        ((x) << 4)      /* Start Delay */
+#define SSPSP_ETDS              (1 << 3)        /* End of Transfer data State */
+#define SSPSP_SFRMP             (1 << 2)        /* Serial Frame Polarity */
+#define SSPSP_SCMODE(x)         ((x) << 0)      /* Serial Bit Rate Clock Mode */
+
+#define SSACD_SCDB              (1 << 3)        /* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)           ((x) << 4)      /* Audio clock PLL select */
+#define SSACD_ACDS(x)           ((x) << 0)      /* Audio clock divider select */
+
+#endif /* __ASM_ARCH_REGS_SSP_H */