aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-pxa/pxa-regs.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-pxa/pxa-regs.h')
-rw-r--r--include/asm-arm/arch-pxa/pxa-regs.h570
1 files changed, 2 insertions, 568 deletions
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 4b2ea1e95c57..dce9308626b7 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -600,418 +600,6 @@
600 600
601 601
602/* 602/*
603 * USB Device Controller
604 * PXA25x and PXA27x USB device controller registers are different.
605 */
606#if defined(CONFIG_PXA25x)
607
608#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
609#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
610#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
611
612#define UDCCR __REG(0x40600000) /* UDC Control Register */
613#define UDCCR_UDE (1 << 0) /* UDC enable */
614#define UDCCR_UDA (1 << 1) /* UDC active */
615#define UDCCR_RSM (1 << 2) /* Device resume */
616#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
617#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
618#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
619#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
620#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
621
622#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
623#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
624#define UDCCS0_IPR (1 << 1) /* IN packet ready */
625#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
626#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
627#define UDCCS0_SST (1 << 4) /* Sent stall */
628#define UDCCS0_FST (1 << 5) /* Force stall */
629#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
630#define UDCCS0_SA (1 << 7) /* Setup active */
631
632/* Bulk IN - Endpoint 1,6,11 */
633#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
634#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
635#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
636
637#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
638#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
639#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
640#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
641#define UDCCS_BI_SST (1 << 4) /* Sent stall */
642#define UDCCS_BI_FST (1 << 5) /* Force stall */
643#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
644
645/* Bulk OUT - Endpoint 2,7,12 */
646#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
647#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
648#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
649
650#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
651#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
652#define UDCCS_BO_DME (1 << 3) /* DMA enable */
653#define UDCCS_BO_SST (1 << 4) /* Sent stall */
654#define UDCCS_BO_FST (1 << 5) /* Force stall */
655#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
656#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
657
658/* Isochronous IN - Endpoint 3,8,13 */
659#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
660#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
661#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
662
663#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
664#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
665#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
666#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
667#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
668
669/* Isochronous OUT - Endpoint 4,9,14 */
670#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
671#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
672#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
673
674#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
675#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
676#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
677#define UDCCS_IO_DME (1 << 3) /* DMA enable */
678#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
679#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
680
681/* Interrupt IN - Endpoint 5,10,15 */
682#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
683#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
684#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
685
686#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
687#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
688#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
689#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
690#define UDCCS_INT_SST (1 << 4) /* Sent stall */
691#define UDCCS_INT_FST (1 << 5) /* Force stall */
692#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
693
694#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
695#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
696#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
697#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
698#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
699#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
700#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
701#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
702#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
703#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
704#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
705#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
706#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
707#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
708#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
709#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
710#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
711#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
712#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
713#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
714#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
715#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
716#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
717#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
718
719#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
720
721#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
722#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
723#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
724#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
725#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
726#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
727#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
728#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
729
730#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
731
732#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
733#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
734#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
735#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
736#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
737#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
738#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
739#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
740
741#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
742
743#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
744#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
745#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
746#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
747#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
748#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
749#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
750#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
751
752#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
753
754#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
755#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
756#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
757#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
758#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
759#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
760#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
761#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
762
763#elif defined(CONFIG_PXA27x)
764
765#define UDCCR __REG(0x40600000) /* UDC Control Register */
766#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
767#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
768 Protocol Port Support */
769#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
770 Support */
771#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
772 Enable */
773#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
774#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
775#define UDCCR_ACN_S 11
776#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
777#define UDCCR_AIN_S 8
778#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
779 Setting Number */
780#define UDCCR_AAISN_S 5
781#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
782 Configuration */
783#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
784 Error */
785#define UDCCR_UDR (1 << 2) /* UDC Resume */
786#define UDCCR_UDA (1 << 1) /* UDC Active */
787#define UDCCR_UDE (1 << 0) /* UDC Enable */
788
789#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
790#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
791#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
792#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
793
794#define UDC_INT_FIFOERROR (0x2)
795#define UDC_INT_PACKETCMP (0x1)
796
797#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
798#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
799#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
800#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
801#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
802#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
803
804#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
805#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
806#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
807#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
808#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
809#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
810#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
811#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
812
813#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
814#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
815#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
816#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
817 Rising Edge Interrupt Enable */
818#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
819 Falling Edge Interrupt Enable */
820#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
821 Interrupt Enable */
822#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
823 Interrupt Enable */
824#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
825 Interrupt Enable */
826#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
827 Interrupt Enable */
828#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
829 Interrupt Enable */
830#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
831 Interrupt Enable */
832#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
833 Edge Interrupt Enable */
834#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
835 Edge Interrupt Enable */
836#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
837 Interrupt Enable */
838#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
839 Interrupt Enable */
840
841#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
842
843#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
844#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
845#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
846#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
847#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
848#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
849#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
850#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
851#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
852#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
853#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
854#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
855#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
856#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
857
858#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
859#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
860#define UDCCSR0_SA (1 << 7) /* Setup Active */
861#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
862#define UDCCSR0_FST (1 << 5) /* Force Stall */
863#define UDCCSR0_SST (1 << 4) /* Sent Stall */
864#define UDCCSR0_DME (1 << 3) /* DMA Enable */
865#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
866#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
867#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
868
869#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
870#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
871#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
872#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
873#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
874#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
875#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
876#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
877#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
878#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
879#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
880#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
881#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
882#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
883#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
884#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
885#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
886#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
887#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
888#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
889#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
890#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
891#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
892
893#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
894#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
895#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
896#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
897#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
898#define UDCCSR_FST (1 << 5) /* Force STALL */
899#define UDCCSR_SST (1 << 4) /* Sent STALL */
900#define UDCCSR_DME (1 << 3) /* DMA Enable */
901#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
902#define UDCCSR_PC (1 << 1) /* Packet Complete */
903#define UDCCSR_FS (1 << 0) /* FIFO needs service */
904
905#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
906#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
907#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
908#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
909#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
910#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
911#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
912#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
913#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
914#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
915#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
916#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
917#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
918#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
919#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
920#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
921#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
922#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
923#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
924#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
925#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
926#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
927#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
928#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
929#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
930
931#define UDCDN(x) __REG2(0x40600300, (x)<<2)
932#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
933#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
934#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
935#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
936#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
937#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
938#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
939#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
940#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
941#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
942#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
943#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
944#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
945#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
946#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
947#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
948#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
949#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
950#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
951#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
952#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
953#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
954#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
955#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
956#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
957#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
958
959#define UDCCN(x) __REG2(0x40600400, (x)<<2)
960#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
961#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
962#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
963#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
964#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
965#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
966#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
967#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
968#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
969#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
970#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
971#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
972#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
973#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
974#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
975#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
976#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
977#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
978#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
979#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
980#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
981#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
982#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
983
984#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
985#define UDCCONR_CN_S (25)
986#define UDCCONR_IN (0x07 << 22) /* Interface Number */
987#define UDCCONR_IN_S (22)
988#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
989#define UDCCONR_AISN_S (19)
990#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
991#define UDCCONR_EN_S (15)
992#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
993#define UDCCONR_ET_S (13)
994#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
995#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
996#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
997#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
998#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
999#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
1000#define UDCCONR_MPS_S (2)
1001#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
1002#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
1003
1004
1005#define UDC_INT_FIFOERROR (0x2)
1006#define UDC_INT_PACKETCMP (0x1)
1007
1008#define UDC_FNR_MASK (0x7ff)
1009
1010#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
1011#define UDC_BCR_MASK (0x3ff)
1012#endif
1013
1014/*
1015 * Fast Infrared Communication Port 603 * Fast Infrared Communication Port
1016 */ 604 */
1017 605
@@ -1237,120 +825,9 @@
1237#endif 825#endif
1238 826
1239/* 827/*
1240 * Power Manager 828 * Power Manager - see pxa2xx-regs.h
1241 */ 829 */
1242 830
1243#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
1244#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
1245#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
1246#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
1247#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
1248#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
1249#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
1250#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
1251#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
1252#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
1253#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
1254#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
1255#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
1256
1257#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
1258#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */
1259#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */
1260#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */
1261#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
1262#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
1263#define PCMD(x) __REG2(0x40F00080, (x)<<2)
1264#define PCMD0 __REG(0x40F00080 + 0 * 4)
1265#define PCMD1 __REG(0x40F00080 + 1 * 4)
1266#define PCMD2 __REG(0x40F00080 + 2 * 4)
1267#define PCMD3 __REG(0x40F00080 + 3 * 4)
1268#define PCMD4 __REG(0x40F00080 + 4 * 4)
1269#define PCMD5 __REG(0x40F00080 + 5 * 4)
1270#define PCMD6 __REG(0x40F00080 + 6 * 4)
1271#define PCMD7 __REG(0x40F00080 + 7 * 4)
1272#define PCMD8 __REG(0x40F00080 + 8 * 4)
1273#define PCMD9 __REG(0x40F00080 + 9 * 4)
1274#define PCMD10 __REG(0x40F00080 + 10 * 4)
1275#define PCMD11 __REG(0x40F00080 + 11 * 4)
1276#define PCMD12 __REG(0x40F00080 + 12 * 4)
1277#define PCMD13 __REG(0x40F00080 + 13 * 4)
1278#define PCMD14 __REG(0x40F00080 + 14 * 4)
1279#define PCMD15 __REG(0x40F00080 + 15 * 4)
1280#define PCMD16 __REG(0x40F00080 + 16 * 4)
1281#define PCMD17 __REG(0x40F00080 + 17 * 4)
1282#define PCMD18 __REG(0x40F00080 + 18 * 4)
1283#define PCMD19 __REG(0x40F00080 + 19 * 4)
1284#define PCMD20 __REG(0x40F00080 + 20 * 4)
1285#define PCMD21 __REG(0x40F00080 + 21 * 4)
1286#define PCMD22 __REG(0x40F00080 + 22 * 4)
1287#define PCMD23 __REG(0x40F00080 + 23 * 4)
1288#define PCMD24 __REG(0x40F00080 + 24 * 4)
1289#define PCMD25 __REG(0x40F00080 + 25 * 4)
1290#define PCMD26 __REG(0x40F00080 + 26 * 4)
1291#define PCMD27 __REG(0x40F00080 + 27 * 4)
1292#define PCMD28 __REG(0x40F00080 + 28 * 4)
1293#define PCMD29 __REG(0x40F00080 + 29 * 4)
1294#define PCMD30 __REG(0x40F00080 + 30 * 4)
1295#define PCMD31 __REG(0x40F00080 + 31 * 4)
1296
1297#define PCMD_MBC (1<<12)
1298#define PCMD_DCE (1<<11)
1299#define PCMD_LC (1<<10)
1300/* FIXME: PCMD_SQC need be checked. */
1301#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
1302 bit 9 should be 0 all day. */
1303#define PVCR_VCSA (0x1<<14)
1304#define PVCR_CommandDelay (0xf80)
1305#define PCFR_PI2C_EN (0x1 << 6)
1306
1307#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
1308#define PSSR_RDH (1 << 5) /* Read Disable Hold */
1309#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
1310#define PSSR_STS (1 << 3) /* Standby Mode Status */
1311#define PSSR_VFS (1 << 2) /* VDD Fault Status */
1312#define PSSR_BFS (1 << 1) /* Battery Fault Status */
1313#define PSSR_SSS (1 << 0) /* Software Sleep Status */
1314
1315#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
1316
1317#define PCFR_RO (1 << 15) /* RDH Override */
1318#define PCFR_PO (1 << 14) /* PH Override */
1319#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
1320#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
1321#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
1322#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
1323#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
1324#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
1325#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
1326#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
1327#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
1328#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
1329
1330#define RCSR_GPR (1 << 3) /* GPIO Reset */
1331#define RCSR_SMR (1 << 2) /* Sleep Mode */
1332#define RCSR_WDR (1 << 1) /* Watchdog Reset */
1333#define RCSR_HWR (1 << 0) /* Hardware Reset */
1334
1335#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
1336#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
1337#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
1338#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
1339#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
1340#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
1341#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
1342#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
1343#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
1344#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
1345#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
1346#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
1347#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
1348#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
1349#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
1350#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
1351#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
1352#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
1353
1354/* 831/*
1355 * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h 832 * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
1356 */ 833 */
@@ -1360,52 +837,9 @@
1360 */ 837 */
1361 838
1362/* 839/*
1363 * Core Clock 840 * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
1364 */ 841 */
1365 842
1366#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
1367#define CKEN __REG(0x41300004) /* Clock Enable Register */
1368#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
1369#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
1370
1371#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
1372#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
1373#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
1374
1375#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */
1376#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */
1377#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */
1378#define CKEN_MEMC (22) /* Memory Controller Clock Enable */
1379#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */
1380#define CKEN_IM (20) /* Internal Memory Clock Enable */
1381#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */
1382#define CKEN_USIM (18) /* USIM Unit Clock Enable */
1383#define CKEN_MSL (17) /* MSL Unit Clock Enable */
1384#define CKEN_LCD (16) /* LCD Unit Clock Enable */
1385#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */
1386#define CKEN_I2C (14) /* I2C Unit Clock Enable */
1387#define CKEN_FICP (13) /* FICP Unit Clock Enable */
1388#define CKEN_MMC (12) /* MMC Unit Clock Enable */
1389#define CKEN_USB (11) /* USB Unit Clock Enable */
1390#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */
1391#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */
1392#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */
1393#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */
1394#define CKEN_I2S (8) /* I2S Unit Clock Enable */
1395#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */
1396#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */
1397#define CKEN_STUART (5) /* STUART Unit Clock Enable */
1398#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */
1399#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */
1400#define CKEN_SSP (3) /* SSP Unit Clock Enable */
1401#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */
1402#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */
1403#define CKEN_PWM1 (1) /* PWM1 Clock Enable */
1404#define CKEN_PWM0 (0) /* PWM0 Clock Enable */
1405
1406#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
1407#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
1408
1409#ifdef CONFIG_PXA27x 843#ifdef CONFIG_PXA27x
1410 844
1411/* Camera Interface */ 845/* Camera Interface */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-07 14:23:34 -0500