diff options
Diffstat (limited to 'include/asm-arm/arch-pxa/mfp.h')
-rw-r--r-- | include/asm-arm/arch-pxa/mfp.h | 409 |
1 files changed, 68 insertions, 341 deletions
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h index 03c508d94f0e..02f6157396d3 100644 --- a/include/asm-arm/arch-pxa/mfp.h +++ b/include/asm-arm/arch-pxa/mfp.h | |||
@@ -16,9 +16,6 @@ | |||
16 | #ifndef __ASM_ARCH_MFP_H | 16 | #ifndef __ASM_ARCH_MFP_H |
17 | #define __ASM_ARCH_MFP_H | 17 | #define __ASM_ARCH_MFP_H |
18 | 18 | ||
19 | #define MFPR_BASE (0x40e10000) | ||
20 | #define MFPR_SIZE (PAGE_SIZE) | ||
21 | |||
22 | #define mfp_to_gpio(m) ((m) % 128) | 19 | #define mfp_to_gpio(m) ((m) % 128) |
23 | 20 | ||
24 | /* list of all the configurable MFP pins */ | 21 | /* list of all the configurable MFP pins */ |
@@ -217,114 +214,21 @@ enum { | |||
217 | }; | 214 | }; |
218 | 215 | ||
219 | /* | 216 | /* |
220 | * Table that determines the low power modes outputs, with actual settings | ||
221 | * used in parentheses for don't-care values. Except for the float output, | ||
222 | * the configured driven and pulled levels match, so if there is a need for | ||
223 | * non-LPM pulled output, the same configuration could probably be used. | ||
224 | * | ||
225 | * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel | ||
226 | * (bit 7) (bit 8) (bit 14d) (bit 13d) | ||
227 | * | ||
228 | * Drive 0 0 0 0 X (1) 0 | ||
229 | * Drive 1 0 1 X (1) 0 0 | ||
230 | * Pull hi (1) 1 X(1) 1 0 0 | ||
231 | * Pull lo (0) 1 X(0) 0 1 0 | ||
232 | * Z (float) 1 X(0) 0 0 0 | ||
233 | */ | ||
234 | #define MFP_LPM_DRIVE_LOW 0x8 | ||
235 | #define MFP_LPM_DRIVE_HIGH 0x6 | ||
236 | #define MFP_LPM_PULL_HIGH 0x7 | ||
237 | #define MFP_LPM_PULL_LOW 0x9 | ||
238 | #define MFP_LPM_FLOAT 0x1 | ||
239 | #define MFP_LPM_PULL_NEITHER 0x0 | ||
240 | |||
241 | /* | ||
242 | * The pullup and pulldown state of the MFP pin is by default determined by | ||
243 | * selected alternate function. In case some buggy devices need to override | ||
244 | * this default behavior, pxa3xx_mfp_set_pull() can be invoked with one of | ||
245 | * the following definition as the parameter. | ||
246 | * | ||
247 | * Definition pull_sel pullup_en pulldown_en | ||
248 | * MFP_PULL_HIGH 1 1 0 | ||
249 | * MFP_PULL_LOW 1 0 1 | ||
250 | * MFP_PULL_BOTH 1 1 1 | ||
251 | * MFP_PULL_NONE 1 0 0 | ||
252 | * MFP_PULL_DEFAULT 0 X X | ||
253 | * | ||
254 | * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN | ||
255 | * bits, which will cause potential conflicts with the low power mode | ||
256 | * setting, device drivers should take care of this | ||
257 | */ | ||
258 | #define MFP_PULL_BOTH (0x7u) | ||
259 | #define MFP_PULL_HIGH (0x6u) | ||
260 | #define MFP_PULL_LOW (0x5u) | ||
261 | #define MFP_PULL_NONE (0x4u) | ||
262 | #define MFP_PULL_DEFAULT (0x0u) | ||
263 | |||
264 | #define MFP_AF0 (0) | ||
265 | #define MFP_AF1 (1) | ||
266 | #define MFP_AF2 (2) | ||
267 | #define MFP_AF3 (3) | ||
268 | #define MFP_AF4 (4) | ||
269 | #define MFP_AF5 (5) | ||
270 | #define MFP_AF6 (6) | ||
271 | #define MFP_AF7 (7) | ||
272 | |||
273 | #define MFP_DS01X (0) | ||
274 | #define MFP_DS02X (1) | ||
275 | #define MFP_DS03X (2) | ||
276 | #define MFP_DS04X (3) | ||
277 | #define MFP_DS06X (4) | ||
278 | #define MFP_DS08X (5) | ||
279 | #define MFP_DS10X (6) | ||
280 | #define MFP_DS12X (7) | ||
281 | |||
282 | #define MFP_EDGE_BOTH 0x3 | ||
283 | #define MFP_EDGE_RISE 0x2 | ||
284 | #define MFP_EDGE_FALL 0x1 | ||
285 | #define MFP_EDGE_NONE 0x0 | ||
286 | |||
287 | #define MFPR_AF_MASK 0x0007 | ||
288 | #define MFPR_DRV_MASK 0x1c00 | ||
289 | #define MFPR_RDH_MASK 0x0200 | ||
290 | #define MFPR_LPM_MASK 0xe180 | ||
291 | #define MFPR_PULL_MASK 0xe000 | ||
292 | #define MFPR_EDGE_MASK 0x0070 | ||
293 | |||
294 | #define MFPR_ALT_OFFSET 0 | ||
295 | #define MFPR_ERE_OFFSET 4 | ||
296 | #define MFPR_EFE_OFFSET 5 | ||
297 | #define MFPR_EC_OFFSET 6 | ||
298 | #define MFPR_SON_OFFSET 7 | ||
299 | #define MFPR_SD_OFFSET 8 | ||
300 | #define MFPR_SS_OFFSET 9 | ||
301 | #define MFPR_DRV_OFFSET 10 | ||
302 | #define MFPR_PD_OFFSET 13 | ||
303 | #define MFPR_PU_OFFSET 14 | ||
304 | #define MFPR_PS_OFFSET 15 | ||
305 | |||
306 | #define MFPR(af, drv, rdh, lpm, edge) \ | ||
307 | (((af) & 0x7) | (((drv) & 0x7) << 10) |\ | ||
308 | (((rdh) & 0x1) << 9) |\ | ||
309 | (((lpm) & 0x3) << 7) |\ | ||
310 | (((lpm) & 0x4) << 12)|\ | ||
311 | (((lpm) & 0x8) << 10)|\ | ||
312 | ((!(edge)) << 6) |\ | ||
313 | (((edge) & 0x1) << 5) |\ | ||
314 | (((edge) & 0x2) << 3)) | ||
315 | |||
316 | /* | ||
317 | * a possible MFP configuration is represented by a 32-bit integer | 217 | * a possible MFP configuration is represented by a 32-bit integer |
318 | * bit 0..15 - MFPR value (16-bit) | 218 | * |
319 | * bit 16..31 - mfp pin index (used to obtain the MFPR offset) | 219 | * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) |
220 | * bit 10..12 - Alternate Function Selection | ||
221 | * bit 13..15 - Drive Strength | ||
222 | * bit 16..18 - Low Power Mode State | ||
223 | * bit 19..20 - Low Power Mode Edge Detection | ||
224 | * bit 21..22 - Run Mode Pull State | ||
320 | * | 225 | * |
321 | * to facilitate the definition, the following macros are provided | 226 | * to facilitate the definition, the following macros are provided |
322 | * | 227 | * |
323 | * MFPR_DEFAULT - default MFPR value, with | 228 | * MFP_CFG_DEFAULT - default MFP configuration value, with |
324 | * alternate function = 0, | 229 | * alternate function = 0, |
325 | * drive strength = fast 1mA (MFP_DS01X) | 230 | * drive strength = fast 3mA (MFP_DS03X) |
326 | * low power mode = default | 231 | * low power mode = default |
327 | * release dalay hold = false (RDH bit) | ||
328 | * edge detection = none | 232 | * edge detection = none |
329 | * | 233 | * |
330 | * MFP_CFG - default MFPR value with alternate function | 234 | * MFP_CFG - default MFPR value with alternate function |
@@ -334,251 +238,74 @@ enum { | |||
334 | * low power mode | 238 | * low power mode |
335 | * MFP_CFG_X - default MFPR value with alternate function, | 239 | * MFP_CFG_X - default MFPR value with alternate function, |
336 | * pin drive strength and low power mode | 240 | * pin drive strength and low power mode |
337 | * | ||
338 | * use | ||
339 | * | ||
340 | * MFP_CFG_PIN - to get the MFP pin index | ||
341 | * MFP_CFG_VAL - to get the corresponding MFPR value | ||
342 | */ | 241 | */ |
343 | 242 | ||
344 | typedef uint32_t mfp_cfg_t; | 243 | typedef unsigned long mfp_cfg_t; |
345 | 244 | ||
346 | #define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff) | 245 | #define MFP_PIN(x) ((x) & 0x3ff) |
347 | #define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff) | 246 | |
348 | 247 | #define MFP_AF0 (0x0 << 10) | |
349 | /* | 248 | #define MFP_AF1 (0x1 << 10) |
350 | * MFP register defaults to | 249 | #define MFP_AF2 (0x2 << 10) |
351 | * drive strength fast 3mA (010'b) | 250 | #define MFP_AF3 (0x3 << 10) |
352 | * edge detection logic disabled | 251 | #define MFP_AF4 (0x4 << 10) |
353 | * alternate function 0 | 252 | #define MFP_AF5 (0x5 << 10) |
354 | */ | 253 | #define MFP_AF6 (0x6 << 10) |
355 | #define MFPR_DEFAULT (0x0840) | 254 | #define MFP_AF7 (0x7 << 10) |
255 | #define MFP_AF_MASK (0x7 << 10) | ||
256 | #define MFP_AF(x) (((x) >> 10) & 0x7) | ||
257 | |||
258 | #define MFP_DS01X (0x0 << 13) | ||
259 | #define MFP_DS02X (0x1 << 13) | ||
260 | #define MFP_DS03X (0x2 << 13) | ||
261 | #define MFP_DS04X (0x3 << 13) | ||
262 | #define MFP_DS06X (0x4 << 13) | ||
263 | #define MFP_DS08X (0x5 << 13) | ||
264 | #define MFP_DS10X (0x6 << 13) | ||
265 | #define MFP_DS13X (0x7 << 13) | ||
266 | #define MFP_DS_MASK (0x7 << 13) | ||
267 | #define MFP_DS(x) (((x) >> 13) & 0x7) | ||
268 | |||
269 | #define MFP_LPM_INPUT (0x0 << 16) | ||
270 | #define MFP_LPM_DRIVE_LOW (0x1 << 16) | ||
271 | #define MFP_LPM_DRIVE_HIGH (0x2 << 16) | ||
272 | #define MFP_LPM_PULL_LOW (0x3 << 16) | ||
273 | #define MFP_LPM_PULL_HIGH (0x4 << 16) | ||
274 | #define MFP_LPM_FLOAT (0x5 << 16) | ||
275 | #define MFP_LPM_STATE_MASK (0x7 << 16) | ||
276 | #define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) | ||
277 | |||
278 | #define MFP_LPM_EDGE_NONE (0x0 << 19) | ||
279 | #define MFP_LPM_EDGE_RISE (0x1 << 19) | ||
280 | #define MFP_LPM_EDGE_FALL (0x2 << 19) | ||
281 | #define MFP_LPM_EDGE_BOTH (0x3 << 19) | ||
282 | #define MFP_LPM_EDGE_MASK (0x3 << 19) | ||
283 | #define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) | ||
284 | |||
285 | #define MFP_PULL_NONE (0x0 << 21) | ||
286 | #define MFP_PULL_LOW (0x1 << 21) | ||
287 | #define MFP_PULL_HIGH (0x2 << 21) | ||
288 | #define MFP_PULL_BOTH (0x3 << 21) | ||
289 | #define MFP_PULL_MASK (0x3 << 21) | ||
290 | #define MFP_PULL(x) (((x) >> 21) & 0x3) | ||
291 | |||
292 | #define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\ | ||
293 | MFP_LPM_EDGE_NONE | MFP_PULL_NONE) | ||
356 | 294 | ||
357 | #define MFP_CFG(pin, af) \ | 295 | #define MFP_CFG(pin, af) \ |
358 | ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af)) | 296 | ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ |
297 | (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) | ||
359 | 298 | ||
360 | #define MFP_CFG_DRV(pin, af, drv) \ | 299 | #define MFP_CFG_DRV(pin, af, drv) \ |
361 | ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_DRV_MASK) |\ | 300 | ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ |
362 | ((MFP_##drv) << 10) | (MFP_##af)) | 301 | (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) |
363 | 302 | ||
364 | #define MFP_CFG_LPM(pin, af, lpm) \ | 303 | #define MFP_CFG_LPM(pin, af, lpm) \ |
365 | ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_LPM_MASK) |\ | 304 | ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ |
366 | (((MFP_LPM_##lpm) & 0x3) << 7) |\ | 305 | (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) |
367 | (((MFP_LPM_##lpm) & 0x4) << 12) |\ | ||
368 | (((MFP_LPM_##lpm) & 0x8) << 10) |\ | ||
369 | (MFP_##af)) | ||
370 | 306 | ||
371 | #define MFP_CFG_X(pin, af, drv, lpm) \ | 307 | #define MFP_CFG_X(pin, af, drv, lpm) \ |
372 | ((MFP_PIN_##pin << 16) |\ | 308 | ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ |
373 | (MFPR_DEFAULT & ~(MFPR_DRV_MASK | MFPR_LPM_MASK)) |\ | 309 | (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) |
374 | ((MFP_##drv) << 10) | (MFP_##af) |\ | ||
375 | (((MFP_LPM_##lpm) & 0x3) << 7) |\ | ||
376 | (((MFP_LPM_##lpm) & 0x4) << 12) |\ | ||
377 | (((MFP_LPM_##lpm) & 0x8) << 10)) | ||
378 | |||
379 | /* common MFP configurations - processor specific ones defined | ||
380 | * in mfp-pxa3xx.h | ||
381 | */ | ||
382 | #define GPIO0_GPIO MFP_CFG(GPIO0, AF0) | ||
383 | #define GPIO1_GPIO MFP_CFG(GPIO1, AF0) | ||
384 | #define GPIO2_GPIO MFP_CFG(GPIO2, AF0) | ||
385 | #define GPIO3_GPIO MFP_CFG(GPIO3, AF0) | ||
386 | #define GPIO4_GPIO MFP_CFG(GPIO4, AF0) | ||
387 | #define GPIO5_GPIO MFP_CFG(GPIO5, AF0) | ||
388 | #define GPIO6_GPIO MFP_CFG(GPIO6, AF0) | ||
389 | #define GPIO7_GPIO MFP_CFG(GPIO7, AF0) | ||
390 | #define GPIO8_GPIO MFP_CFG(GPIO8, AF0) | ||
391 | #define GPIO9_GPIO MFP_CFG(GPIO9, AF0) | ||
392 | #define GPIO10_GPIO MFP_CFG(GPIO10, AF0) | ||
393 | #define GPIO11_GPIO MFP_CFG(GPIO11, AF0) | ||
394 | #define GPIO12_GPIO MFP_CFG(GPIO12, AF0) | ||
395 | #define GPIO13_GPIO MFP_CFG(GPIO13, AF0) | ||
396 | #define GPIO14_GPIO MFP_CFG(GPIO14, AF0) | ||
397 | #define GPIO15_GPIO MFP_CFG(GPIO15, AF0) | ||
398 | #define GPIO16_GPIO MFP_CFG(GPIO16, AF0) | ||
399 | #define GPIO17_GPIO MFP_CFG(GPIO17, AF0) | ||
400 | #define GPIO18_GPIO MFP_CFG(GPIO18, AF0) | ||
401 | #define GPIO19_GPIO MFP_CFG(GPIO19, AF0) | ||
402 | #define GPIO20_GPIO MFP_CFG(GPIO20, AF0) | ||
403 | #define GPIO21_GPIO MFP_CFG(GPIO21, AF0) | ||
404 | #define GPIO22_GPIO MFP_CFG(GPIO22, AF0) | ||
405 | #define GPIO23_GPIO MFP_CFG(GPIO23, AF0) | ||
406 | #define GPIO24_GPIO MFP_CFG(GPIO24, AF0) | ||
407 | #define GPIO25_GPIO MFP_CFG(GPIO25, AF0) | ||
408 | #define GPIO26_GPIO MFP_CFG(GPIO26, AF0) | ||
409 | #define GPIO27_GPIO MFP_CFG(GPIO27, AF0) | ||
410 | #define GPIO28_GPIO MFP_CFG(GPIO28, AF0) | ||
411 | #define GPIO29_GPIO MFP_CFG(GPIO29, AF0) | ||
412 | #define GPIO30_GPIO MFP_CFG(GPIO30, AF0) | ||
413 | #define GPIO31_GPIO MFP_CFG(GPIO31, AF0) | ||
414 | #define GPIO32_GPIO MFP_CFG(GPIO32, AF0) | ||
415 | #define GPIO33_GPIO MFP_CFG(GPIO33, AF0) | ||
416 | #define GPIO34_GPIO MFP_CFG(GPIO34, AF0) | ||
417 | #define GPIO35_GPIO MFP_CFG(GPIO35, AF0) | ||
418 | #define GPIO36_GPIO MFP_CFG(GPIO36, AF0) | ||
419 | #define GPIO37_GPIO MFP_CFG(GPIO37, AF0) | ||
420 | #define GPIO38_GPIO MFP_CFG(GPIO38, AF0) | ||
421 | #define GPIO39_GPIO MFP_CFG(GPIO39, AF0) | ||
422 | #define GPIO40_GPIO MFP_CFG(GPIO40, AF0) | ||
423 | #define GPIO41_GPIO MFP_CFG(GPIO41, AF0) | ||
424 | #define GPIO42_GPIO MFP_CFG(GPIO42, AF0) | ||
425 | #define GPIO43_GPIO MFP_CFG(GPIO43, AF0) | ||
426 | #define GPIO44_GPIO MFP_CFG(GPIO44, AF0) | ||
427 | #define GPIO45_GPIO MFP_CFG(GPIO45, AF0) | ||
428 | |||
429 | #define GPIO47_GPIO MFP_CFG(GPIO47, AF0) | ||
430 | #define GPIO48_GPIO MFP_CFG(GPIO48, AF0) | ||
431 | |||
432 | #define GPIO53_GPIO MFP_CFG(GPIO53, AF0) | ||
433 | #define GPIO54_GPIO MFP_CFG(GPIO54, AF0) | ||
434 | #define GPIO55_GPIO MFP_CFG(GPIO55, AF0) | ||
435 | |||
436 | #define GPIO57_GPIO MFP_CFG(GPIO57, AF0) | ||
437 | |||
438 | #define GPIO63_GPIO MFP_CFG(GPIO63, AF0) | ||
439 | #define GPIO64_GPIO MFP_CFG(GPIO64, AF0) | ||
440 | #define GPIO65_GPIO MFP_CFG(GPIO65, AF0) | ||
441 | #define GPIO66_GPIO MFP_CFG(GPIO66, AF0) | ||
442 | #define GPIO67_GPIO MFP_CFG(GPIO67, AF0) | ||
443 | #define GPIO68_GPIO MFP_CFG(GPIO68, AF0) | ||
444 | #define GPIO69_GPIO MFP_CFG(GPIO69, AF0) | ||
445 | #define GPIO70_GPIO MFP_CFG(GPIO70, AF0) | ||
446 | #define GPIO71_GPIO MFP_CFG(GPIO71, AF0) | ||
447 | #define GPIO72_GPIO MFP_CFG(GPIO72, AF0) | ||
448 | #define GPIO73_GPIO MFP_CFG(GPIO73, AF0) | ||
449 | #define GPIO74_GPIO MFP_CFG(GPIO74, AF0) | ||
450 | #define GPIO75_GPIO MFP_CFG(GPIO75, AF0) | ||
451 | #define GPIO76_GPIO MFP_CFG(GPIO76, AF0) | ||
452 | #define GPIO77_GPIO MFP_CFG(GPIO77, AF0) | ||
453 | #define GPIO78_GPIO MFP_CFG(GPIO78, AF0) | ||
454 | #define GPIO79_GPIO MFP_CFG(GPIO79, AF0) | ||
455 | #define GPIO80_GPIO MFP_CFG(GPIO80, AF0) | ||
456 | #define GPIO81_GPIO MFP_CFG(GPIO81, AF0) | ||
457 | #define GPIO82_GPIO MFP_CFG(GPIO82, AF0) | ||
458 | #define GPIO83_GPIO MFP_CFG(GPIO83, AF0) | ||
459 | #define GPIO84_GPIO MFP_CFG(GPIO84, AF0) | ||
460 | #define GPIO85_GPIO MFP_CFG(GPIO85, AF0) | ||
461 | #define GPIO86_GPIO MFP_CFG(GPIO86, AF0) | ||
462 | #define GPIO87_GPIO MFP_CFG(GPIO87, AF0) | ||
463 | #define GPIO88_GPIO MFP_CFG(GPIO88, AF0) | ||
464 | #define GPIO89_GPIO MFP_CFG(GPIO89, AF0) | ||
465 | #define GPIO90_GPIO MFP_CFG(GPIO90, AF0) | ||
466 | #define GPIO91_GPIO MFP_CFG(GPIO91, AF0) | ||
467 | #define GPIO92_GPIO MFP_CFG(GPIO92, AF0) | ||
468 | #define GPIO93_GPIO MFP_CFG(GPIO93, AF0) | ||
469 | #define GPIO94_GPIO MFP_CFG(GPIO94, AF0) | ||
470 | #define GPIO95_GPIO MFP_CFG(GPIO95, AF0) | ||
471 | #define GPIO96_GPIO MFP_CFG(GPIO96, AF0) | ||
472 | #define GPIO97_GPIO MFP_CFG(GPIO97, AF0) | ||
473 | #define GPIO98_GPIO MFP_CFG(GPIO98, AF0) | ||
474 | #define GPIO99_GPIO MFP_CFG(GPIO99, AF0) | ||
475 | #define GPIO100_GPIO MFP_CFG(GPIO100, AF0) | ||
476 | #define GPIO101_GPIO MFP_CFG(GPIO101, AF0) | ||
477 | #define GPIO102_GPIO MFP_CFG(GPIO102, AF0) | ||
478 | #define GPIO103_GPIO MFP_CFG(GPIO103, AF0) | ||
479 | #define GPIO104_GPIO MFP_CFG(GPIO104, AF0) | ||
480 | #define GPIO105_GPIO MFP_CFG(GPIO105, AF0) | ||
481 | #define GPIO106_GPIO MFP_CFG(GPIO106, AF0) | ||
482 | #define GPIO107_GPIO MFP_CFG(GPIO107, AF0) | ||
483 | #define GPIO108_GPIO MFP_CFG(GPIO108, AF0) | ||
484 | #define GPIO109_GPIO MFP_CFG(GPIO109, AF0) | ||
485 | #define GPIO110_GPIO MFP_CFG(GPIO110, AF0) | ||
486 | #define GPIO111_GPIO MFP_CFG(GPIO111, AF0) | ||
487 | #define GPIO112_GPIO MFP_CFG(GPIO112, AF0) | ||
488 | #define GPIO113_GPIO MFP_CFG(GPIO113, AF0) | ||
489 | #define GPIO114_GPIO MFP_CFG(GPIO114, AF0) | ||
490 | #define GPIO115_GPIO MFP_CFG(GPIO115, AF0) | ||
491 | #define GPIO116_GPIO MFP_CFG(GPIO116, AF0) | ||
492 | #define GPIO117_GPIO MFP_CFG(GPIO117, AF0) | ||
493 | #define GPIO118_GPIO MFP_CFG(GPIO118, AF0) | ||
494 | #define GPIO119_GPIO MFP_CFG(GPIO119, AF0) | ||
495 | #define GPIO120_GPIO MFP_CFG(GPIO120, AF0) | ||
496 | #define GPIO121_GPIO MFP_CFG(GPIO121, AF0) | ||
497 | #define GPIO122_GPIO MFP_CFG(GPIO122, AF0) | ||
498 | #define GPIO123_GPIO MFP_CFG(GPIO123, AF0) | ||
499 | #define GPIO124_GPIO MFP_CFG(GPIO124, AF0) | ||
500 | #define GPIO125_GPIO MFP_CFG(GPIO125, AF0) | ||
501 | #define GPIO126_GPIO MFP_CFG(GPIO126, AF0) | ||
502 | #define GPIO127_GPIO MFP_CFG(GPIO127, AF0) | ||
503 | |||
504 | #define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) | ||
505 | #define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) | ||
506 | #define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) | ||
507 | #define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) | ||
508 | #define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) | ||
509 | #define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) | ||
510 | #define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) | ||
511 | |||
512 | /* | ||
513 | * each MFP pin will have a MFPR register, since the offset of the | ||
514 | * register varies between processors, the processor specific code | ||
515 | * should initialize the pin offsets by pxa3xx_mfp_init_addr() | ||
516 | * | ||
517 | * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" | ||
518 | * structure, which represents a range of MFP pins from "start" to | ||
519 | * "end", with the offset begining at "offset", to define a single | ||
520 | * pin, let "end" = -1 | ||
521 | * | ||
522 | * use | ||
523 | * | ||
524 | * MFP_ADDR_X() to define a range of pins | ||
525 | * MFP_ADDR() to define a single pin | ||
526 | * MFP_ADDR_END to signal the end of pin offset definitions | ||
527 | */ | ||
528 | struct pxa3xx_mfp_addr_map { | ||
529 | unsigned int start; | ||
530 | unsigned int end; | ||
531 | unsigned long offset; | ||
532 | }; | ||
533 | |||
534 | #define MFP_ADDR_X(start, end, offset) \ | ||
535 | { MFP_PIN_##start, MFP_PIN_##end, offset } | ||
536 | |||
537 | #define MFP_ADDR(pin, offset) \ | ||
538 | { MFP_PIN_##pin, -1, offset } | ||
539 | |||
540 | #define MFP_ADDR_END { MFP_PIN_INVALID, 0 } | ||
541 | |||
542 | struct pxa3xx_mfp_pin { | ||
543 | unsigned long mfpr_off; /* MFPRxx register offset */ | ||
544 | unsigned long mfpr_val; /* MFPRxx register value */ | ||
545 | }; | ||
546 | |||
547 | /* | ||
548 | * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access | ||
549 | * to the MFPR register | ||
550 | */ | ||
551 | unsigned long pxa3xx_mfp_read(int mfp); | ||
552 | void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); | ||
553 | |||
554 | /* | ||
555 | * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength | ||
556 | * pxa3xx_mfp_set_rdh - set MFP release delay hold on/off | ||
557 | * pxa3xx_mfp_set_lpm - set MFP low power mode state | ||
558 | * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode | ||
559 | * | ||
560 | * use these functions to override/change the default configuration | ||
561 | * done by pxa3xx_mfp_set_config(s) | ||
562 | */ | ||
563 | void pxa3xx_mfp_set_afds(int mfp, int af, int ds); | ||
564 | void pxa3xx_mfp_set_rdh(int mfp, int rdh); | ||
565 | void pxa3xx_mfp_set_lpm(int mfp, int lpm); | ||
566 | void pxa3xx_mfp_set_edge(int mfp, int edge); | ||
567 | |||
568 | /* | ||
569 | * pxa3xx_mfp_config - configure the MFPR registers | ||
570 | * | ||
571 | * used by board specific initialization code | ||
572 | */ | ||
573 | void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num); | ||
574 | |||
575 | /* | ||
576 | * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin | ||
577 | * index and MFPR register offset | ||
578 | * | ||
579 | * used by processor specific code | ||
580 | */ | ||
581 | void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); | ||
582 | void __init pxa3xx_init_mfp(void); | ||
583 | 310 | ||
584 | #endif /* __ASM_ARCH_MFP_H */ | 311 | #endif /* __ASM_ARCH_MFP_H */ |