1 files changed, 100 insertions, 0 deletions

diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
new file mode 100644
index 000000000000..bb31b315c350
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
@@ -0,0 +1,100 @@
+/*
+ * include/asm-arm/arch-kirkwood/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ *  88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000     PCIe Memory space
+ * f1000000     on-chip peripheral registers
+ * f2000000     PCIe I/O space
+ * f3000000     NAND controller address window
+ *
+ * virt         phys            size
+ * fee00000     f1000000        1M      on-chip peripheral registers
+ * fef00000     f2000000        1M      PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE     0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE          SZ_64K /* 1K is sufficient, but 64K
+                                                * is the minimal window size
+                                                */
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE      0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE      0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE       0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE           SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE         0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE         0xfee00000
+#define KIRKWOOD_REGS_SIZE              SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE     0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE          SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE        (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define  CPU_CONTROL            (BRIDGE_VIRT_BASE | 0x0104)
+#define   CPU_RESET             0x00000002
+#define  RSTOUTn_MASK           (BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN     0x00000004
+#define  SYSTEM_SOFT_RESET      (BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET            0x00000001
+#define  BRIDGE_CAUSE           (BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK            (BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0     0x0002
+#define   BRIDGE_INT_TIMER1     0x0004
+#define   BRIDGE_INT_TIMER1_CLR (~0x0004)
+#define  IRQ_VIRT_BASE          (BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF     0x0000
+#define   IRQ_MASK_LOW_OFF      0x0004
+#define   IRQ_CAUSE_HIGH_OFF    0x0010
+#define   IRQ_MASK_HIGH_OFF     0x0014
+#define  TIMER_VIRT_BASE        (BRIDGE_VIRT_BASE | 0x0300)
+#define  L2_CONFIG_REG          (BRIDGE_VIRT_BASE | 0x0128)
+#define   L2_WRITETHROUGH       0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE           (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU_BASE    (DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE       (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE       (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET        (DEV_BUS_VIRT_BASE | 0x0030)
+#define  DEVICE_ID              (DEV_BUS_VIRT_BASE | 0x0034)
+#define  RTC_PHYS_BASE          (DEV_BUS_PHYS_BASE | 0x0300)
+#define  SPI_PHYS_BASE          (DEV_BUS_PHYS_BASE | 0x0600)
+#define  UART0_PHYS_BASE        (DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE        (DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE        (DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE        (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE           (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX                50
+
+
+#endif